5 files changed, 120 insertions, 0 deletions
diff --git a/tests/xilinx/dsp_simd.ys b/tests/xilinx/dsp_simd.ys
new file mode 100644
index 000000000..956952327
--- /dev/null
+++ b/tests/xilinx/dsp_simd.ys
@@ -0,0 +1,25 @@
+read_verilog <<EOT
+module simd(input [12*4-1:0] a, input [12*4-1:0] b, (* use_dsp="simd" *) output [7*12-1:0] o12, (* use_dsp="simd" *) output [2*24-1:0] o24);
+generate
+    genvar i;
+    // 4 x 12-bit adder
+    for (i = 0; i < 4; i++)
+        assign o12[i*12+:12] = a[i*12+:12] + b[i*12+:12];
+    // 2 x 24-bit subtract
+    for (i = 0; i < 2; i++)
+        assign o24[i*24+:24] = a[i*24+:24] - b[i*24+:24];
+endgenerate
+reg [3*12-1:0] ro;
+always @* begin
+    ro[0*12+:12] = a[0*10+:10] + b[0*10+:10];
+    ro[1*12+:12] = a[1*10+:10] + b[1*10+:10];
+    ro[2*12+:12] = a[2*8+:8] + b[2*8+:8];
+end
+assign o12[4*12+:3*12] = ro;
+endmodule
+EOT
+
+proc
+equiv_opt -assert -map +/xilinx/cells_sim.v synth_xilinx
+design -load postopt
+select -assert-count 3 t:DSP48E1
diff --git a/tests/xilinx/macc.v b/tests/xilinx/macc.v
new file mode 100644
index 000000000..0bb673316
--- /dev/null
+++ b/tests/xilinx/macc.v
@@ -0,0 +1,41 @@
+// Signed 40-bit streaming accumulator with 16-bit inputs
+// File: HDL_Coding_Techniques/multipliers/multipliers4.v
+//
+// Source:
+// https://www.xilinx.com/support/documentation/sw_manuals/xilinx2014_2/ug901-vivado-synthesis.pdf p.90
+//
+module macc # (parameter SIZEIN = 16, SIZEOUT = 40) (
+	input clk, ce, sload,
+	input signed [SIZEIN-1:0] a, b,
+	output signed [SIZEOUT-1:0] accum_out
+);
+// Declare registers for intermediate values
+reg signed [SIZEIN-1:0] a_reg, b_reg;
+reg sload_reg;
+reg signed [2*SIZEIN-1:0] mult_reg;
+reg signed [SIZEOUT-1:0] adder_out, old_result;
+always @* /*(adder_out or sload_reg)*/ begin // Modification necessary to fix sim/synth mismatch
+	if (sload_reg)
+		old_result <= 0;
+	else
+		// 'sload' is now active (=low) and opens the accumulation loop.
+		// The accumulator takes the next multiplier output in
+		// the same cycle.
+		old_result <= adder_out;
+end
+
+always @(posedge clk)
+	if (ce)
+	begin
+		a_reg <= a;
+		b_reg <= b;
+		mult_reg <= a_reg * b_reg;
+		sload_reg <= sload;
+		// Store accumulation result into a register
+		adder_out <= old_result + mult_reg;
+	end
+
+	// Output accumulation result
+	assign accum_out = adder_out;
+
+endmodule
diff --git a/tests/xilinx/macc.ys b/tests/xilinx/macc.ys
new file mode 100644
index 000000000..de408162c
--- /dev/null
+++ b/tests/xilinx/macc.ys
@@ -0,0 +1,13 @@
+read_verilog macc.v
+proc
+hierarchy -auto-top
+#equiv_opt -assert -map +/xilinx/cells_sim.v synth_xilinx ### TODO
+equiv_opt -run :prove -map +/xilinx/cells_sim.v synth_xilinx
+miter -equiv -flatten -make_assert -make_outputs gold gate miter
+sat -verify -prove-asserts -seq 10 -show-inputs -show-outputs miter
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd macc # Constrain all select calls below inside the top module
+select -assert-count 1 t:BUFG
+select -assert-count 1 t:FDRE
+select -assert-count 1 t:DSP48E1
+select -assert-none t:BUFG t:FDRE t:DSP48E1 %% t:* %D
diff --git a/tests/xilinx/mul_unsigned.v b/tests/xilinx/mul_unsigned.v
new file mode 100644
index 000000000..e3713a642
--- /dev/null
+++ b/tests/xilinx/mul_unsigned.v
@@ -0,0 +1,30 @@
+/*
+Example from: https://www.xilinx.com/support/documentation/sw_manuals/xilinx2019_1/ug901-vivado-synthesis.pdf [p. 89].
+*/
+
+// Unsigned 16x24-bit Multiplier
+// 1 latency stage on operands
+// 3 latency stage after the multiplication
+// File: multipliers2.v
+//
+module mul_unsigned (clk, A, B, RES);
+parameter WIDTHA = /*16*/ 6;
+parameter WIDTHB = /*24*/ 9;
+input clk;
+input [WIDTHA-1:0] A;
+input [WIDTHB-1:0] B;
+output [WIDTHA+WIDTHB-1:0] RES;
+reg [WIDTHA-1:0] rA;
+reg [WIDTHB-1:0] rB;
+reg [WIDTHA+WIDTHB-1:0] M [3:0];
+integer i;
+always @(posedge clk)
+ begin
+ rA <= A;
+ rB <= B;
+ M[0] <= rA * rB;
+ for (i = 0; i < 3; i = i+1)
+ M[i+1] <= M[i];
+ end
+assign RES = M[3];
+endmodule
diff --git a/tests/xilinx/mul_unsigned.ys b/tests/xilinx/mul_unsigned.ys
new file mode 100644
index 000000000..30c034afe
--- /dev/null
+++ b/tests/xilinx/mul_unsigned.ys
@@ -0,0 +1,11 @@
+read_verilog mul_unsigned.v
+proc
+hierarchy -top mul_unsigned
+equiv_opt -assert -map +/xilinx/cells_sim.v synth_xilinx # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd mul_unsigned # Constrain all select calls below inside the top module
+stat
+select -assert-count 1 t:BUFG
+select -assert-count 1 t:DSP48E1
+select -assert-count 30 t:FDRE
+select -assert-none t:DSP48E1 t:FDRE t:BUFG %% t:* %D