From 849369d6c66d3054688672f97d31fceb8e8230fb Mon Sep 17 00:00:00 2001 From: root Date: Fri, 25 Dec 2015 04:40:36 +0000 Subject: initial_commit --- .../mach-bcmring/include/mach/csp/chipcHw_reg.h | 530 +++++++++++++++++++++ 1 file changed, 530 insertions(+) create mode 100644 arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h (limited to 'arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h') diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h new file mode 100644 index 00000000..b162448f --- /dev/null +++ b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h @@ -0,0 +1,530 @@ +/***************************************************************************** +* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved. +* +* Unless you and Broadcom execute a separate written software license +* agreement governing use of this software, this software is licensed to you +* under the terms of the GNU General Public License version 2, available at +* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). +* +* Notwithstanding the above, under no circumstances may you combine this +* software in any way with any other Broadcom software provided under a +* license other than the GPL, without Broadcom's express prior written +* consent. +*****************************************************************************/ + +/****************************************************************************/ +/** +* @file chipcHw_reg.h +* +* @brief Definitions for low level chip control registers +* +*/ +/****************************************************************************/ +#ifndef CHIPCHW_REG_H +#define CHIPCHW_REG_H + +#include +#include +#include + +#define chipcHw_BASE_ADDRESS MM_IO_BASE_CHIPC + +typedef struct { + uint32_t ChipId; /* Chip ID */ + uint32_t DDRClock; /* PLL1 Channel 1 for DDR clock */ + uint32_t ARMClock; /* PLL1 Channel 2 for ARM clock */ + uint32_t ESWClock; /* PLL1 Channel 3 for ESW system clock */ + uint32_t VPMClock; /* PLL1 Channel 4 for VPM clock */ + uint32_t ESW125Clock; /* PLL1 Channel 5 for ESW 125MHz clock */ + uint32_t UARTClock; /* PLL1 Channel 6 for UART clock */ + uint32_t SDIO0Clock; /* PLL1 Channel 7 for SDIO 0 clock */ + uint32_t SDIO1Clock; /* PLL1 Channel 8 for SDIO 1 clock */ + uint32_t SPIClock; /* PLL1 Channel 9 for SPI master Clock */ + uint32_t ETMClock; /* PLL1 Channel 10 for ARM ETM Clock */ + + uint32_t ACLKClock; /* ACLK Clock (Divider) */ + uint32_t OTPClock; /* OTP Clock (Divider) */ + uint32_t I2CClock; /* I2C Clock (CK_13m) (Divider) */ + uint32_t I2S0Clock; /* I2S0 Clock (Divider) */ + uint32_t RTBUSClock; /* RTBUS (DDR PHY Config.) Clock (Divider) */ + uint32_t pad1; + uint32_t APM100Clock; /* APM 100MHz CLK Clock (Divider) */ + uint32_t TSCClock; /* TSC Clock (Divider) */ + uint32_t LEDClock; /* LED Clock (Divider) */ + + uint32_t USBClock; /* PLL2 Channel 1 for USB clock */ + uint32_t LCDClock; /* PLL2 Channel 2 for LCD clock */ + uint32_t APMClock; /* PLL2 Channel 3 for APM 200 MHz clock */ + + uint32_t BusIntfClock; /* Bus interface clock */ + + uint32_t PLLStatus; /* PLL status register (PLL1) */ + uint32_t PLLConfig; /* PLL configuration register (PLL1) */ + uint32_t PLLPreDivider; /* PLL pre-divider control register (PLL1) */ + uint32_t PLLDivider; /* PLL divider control register (PLL1) */ + uint32_t PLLControl1; /* PLL analog control register #1 (PLL1) */ + uint32_t PLLControl2; /* PLL analog control register #2 (PLL1) */ + + uint32_t I2S1Clock; /* I2S1 Clock */ + uint32_t AudioEnable; /* Enable/ disable audio channel */ + uint32_t SoftReset1; /* Reset blocks */ + uint32_t SoftReset2; /* Reset blocks */ + uint32_t Spare1; /* Phase align interrupts */ + uint32_t Sticky; /* Sticky bits */ + uint32_t MiscCtrl; /* Misc. control */ + uint32_t pad3[3]; + + uint32_t PLLStatus2; /* PLL status register (PLL2) */ + uint32_t PLLConfig2; /* PLL configuration register (PLL2) */ + uint32_t PLLPreDivider2; /* PLL pre-divider control register (PLL2) */ + uint32_t PLLDivider2; /* PLL divider control register (PLL2) */ + uint32_t PLLControl12; /* PLL analog control register #1 (PLL2) */ + uint32_t PLLControl22; /* PLL analog control register #2 (PLL2) */ + + uint32_t DDRPhaseCtrl1; /* DDR Clock Phase Alignment control1 */ + uint32_t VPMPhaseCtrl1; /* VPM Clock Phase Alignment control1 */ + uint32_t PhaseAlignStatus; /* DDR/VPM Clock Phase Alignment Status */ + uint32_t PhaseCtrlStatus; /* DDR/VPM Clock HW DDR/VPM ph_ctrl and load_ch Status */ + uint32_t DDRPhaseCtrl2; /* DDR Clock Phase Alignment control2 */ + uint32_t VPMPhaseCtrl2; /* VPM Clock Phase Alignment control2 */ + uint32_t pad4[9]; + + uint32_t SoftOTP1; /* Software OTP control */ + uint32_t SoftOTP2; /* Software OTP control */ + uint32_t SoftStraps; /* Software strap */ + uint32_t PinStraps; /* Pin Straps */ + uint32_t DiffOscCtrl; /* Diff oscillator control */ + uint32_t DiagsCtrl; /* Diagnostic control */ + uint32_t DiagsOutputCtrl; /* Diagnostic output enable */ + uint32_t DiagsReadBackCtrl; /* Diagnostic read back control */ + + uint32_t LcdPifMode; /* LCD/PIF Pin Sharing MUX Mode */ + + uint32_t GpioMux_0_7; /* Pin Sharing MUX0 Control */ + uint32_t GpioMux_8_15; /* Pin Sharing MUX1 Control */ + uint32_t GpioMux_16_23; /* Pin Sharing MUX2 Control */ + uint32_t GpioMux_24_31; /* Pin Sharing MUX3 Control */ + uint32_t GpioMux_32_39; /* Pin Sharing MUX4 Control */ + uint32_t GpioMux_40_47; /* Pin Sharing MUX5 Control */ + uint32_t GpioMux_48_55; /* Pin Sharing MUX6 Control */ + uint32_t GpioMux_56_63; /* Pin Sharing MUX7 Control */ + + uint32_t GpioSR_0_7; /* Slew rate for GPIO 0 - 7 */ + uint32_t GpioSR_8_15; /* Slew rate for GPIO 8 - 15 */ + uint32_t GpioSR_16_23; /* Slew rate for GPIO 16 - 23 */ + uint32_t GpioSR_24_31; /* Slew rate for GPIO 24 - 31 */ + uint32_t GpioSR_32_39; /* Slew rate for GPIO 32 - 39 */ + uint32_t GpioSR_40_47; /* Slew rate for GPIO 40 - 47 */ + uint32_t GpioSR_48_55; /* Slew rate for GPIO 48 - 55 */ + uint32_t GpioSR_56_63; /* Slew rate for GPIO 56 - 63 */ + uint32_t MiscSR_0_7; /* Slew rate for MISC 0 - 7 */ + uint32_t MiscSR_8_15; /* Slew rate for MISC 8 - 15 */ + + uint32_t GpioPull_0_15; /* Pull up registers for GPIO 0 - 15 */ + uint32_t GpioPull_16_31; /* Pull up registers for GPIO 16 - 31 */ + uint32_t GpioPull_32_47; /* Pull up registers for GPIO 32 - 47 */ + uint32_t GpioPull_48_63; /* Pull up registers for GPIO 48 - 63 */ + uint32_t MiscPull_0_15; /* Pull up registers for MISC 0 - 15 */ + + uint32_t GpioInput_0_31; /* Input type for GPIO 0 - 31 */ + uint32_t GpioInput_32_63; /* Input type for GPIO 32 - 63 */ + uint32_t MiscInput_0_15; /* Input type for MISC 0 - 16 */ +} chipcHw_REG_t; + +#define pChipcHw ((volatile chipcHw_REG_t *) chipcHw_BASE_ADDRESS) +#define pChipcPhysical ((volatile chipcHw_REG_t *) MM_ADDR_IO_CHIPC) + +#define chipcHw_REG_CHIPID_BASE_MASK 0xFFFFF000 +#define chipcHw_REG_CHIPID_BASE_SHIFT 12 +#define chipcHw_REG_CHIPID_REV_MASK 0x00000FFF +#define chipcHw_REG_REV_A0 0xA00 +#define chipcHw_REG_REV_B0 0x0B0 + +#define chipcHw_REG_PLL_STATUS_CONTROL_ENABLE 0x80000000 /* Allow controlling PLL registers */ +#define chipcHw_REG_PLL_STATUS_LOCKED 0x00000001 /* PLL is settled */ +#define chipcHw_REG_PLL_CONFIG_D_RESET 0x00000008 /* Digital reset */ +#define chipcHw_REG_PLL_CONFIG_A_RESET 0x00000004 /* Analog reset */ +#define chipcHw_REG_PLL_CONFIG_BYPASS_ENABLE 0x00000020 /* Bypass enable */ +#define chipcHw_REG_PLL_CONFIG_OUTPUT_ENABLE 0x00000010 /* Output enable */ +#define chipcHw_REG_PLL_CONFIG_POWER_DOWN 0x00000001 /* Power down */ +#define chipcHw_REG_PLL_CONFIG_VCO_SPLIT_FREQ 1600000000 /* 1.6GHz VCO split frequency */ +#define chipcHw_REG_PLL_CONFIG_VCO_800_1600 0x00000000 /* VCO range 800-1600 MHz */ +#define chipcHw_REG_PLL_CONFIG_VCO_1601_3200 0x00000080 /* VCO range 1601-3200 MHz */ +#define chipcHw_REG_PLL_CONFIG_TEST_ENABLE 0x00010000 /* PLL test output enable */ +#define chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK 0x003E0000 /* Mask to set test values */ +#define chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT 17 + +#define chipcHw_REG_PLL_CLOCK_PHASE_COMP 0x00800000 /* Phase comparator output */ +#define chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK 0x00300000 /* Clock to bus ratio mask */ +#define chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT 20 /* Number of bits to be shifted */ +#define chipcHw_REG_PLL_CLOCK_POWER_DOWN 0x00080000 /* PLL channel power down */ +#define chipcHw_REG_PLL_CLOCK_SOURCE_GPIO 0x00040000 /* Use GPIO as source */ +#define chipcHw_REG_PLL_CLOCK_BYPASS_SELECT 0x00020000 /* Select bypass clock */ +#define chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE 0x00010000 /* Clock gated ON */ +#define chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE 0x00008000 /* Clock phase update enable */ +#define chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT 8 /* Number of bits to be shifted */ +#define chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK 0x00003F00 /* Phase control mask */ +#define chipcHw_REG_PLL_CLOCK_MDIV_MASK 0x000000FF /* Clock post divider mask + + 00000000 = divide-by-256 + 00000001 = divide-by-1 + 00000010 = divide-by-2 + 00000011 = divide-by-3 + 00000100 = divide-by-4 + 00000101 = divide-by-5 + 00000110 = divide-by-6 + . + . + 11111011 = divide-by-251 + 11111100 = divide-by-252 + 11111101 = divide-by-253 + 11111110 = divide-by-254 + */ + +#define chipcHw_REG_DIV_CLOCK_SOURCE_OTHER 0x00040000 /* NON-PLL clock source select */ +#define chipcHw_REG_DIV_CLOCK_BYPASS_SELECT 0x00020000 /* NON-PLL clock bypass enable */ +#define chipcHw_REG_DIV_CLOCK_OUTPUT_ENABLE 0x00010000 /* NON-PLL clock output enable */ +#define chipcHw_REG_DIV_CLOCK_DIV_MASK 0x000000FF /* NON-PLL clock post-divide mask */ +#define chipcHw_REG_DIV_CLOCK_DIV_256 0x00000000 /* NON-PLL clock post-divide by 256 */ + +#define chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT 0 +#define chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT 4 +#define chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT 8 +#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK 0x0001FF00 +#define chipcHw_REG_PLL_PREDIVIDER_POWER_DOWN 0x02000000 +#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK 0x00700000 /* Divider mask */ +#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER 0x00000000 /* Integer-N Mode */ +#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASH_UNIT 0x00100000 /* MASH Sigma-Delta Modulator Unit Mode */ +#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MFB_UNIT 0x00200000 /* MFB Sigma-Delta Modulator Unit Mode */ +#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASH_1_8 0x00300000 /* MASH Sigma-Delta Modulator 1/8 Mode */ +#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MFB_1_8 0x00400000 /* MFB Sigma-Delta Modulator 1/8 Mode */ + +#define chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vco) ((vco) / chipcHw_XTAL_FREQ_Hz) +#define chipcHw_REG_PLL_PREDIVIDER_P1 1 +#define chipcHw_REG_PLL_PREDIVIDER_P2 1 + +#define chipcHw_REG_PLL_DIVIDER_M1DIV 0x03000000 +#define chipcHw_REG_PLL_DIVIDER_FRAC 0x00FFFFFF /* Fractional divider */ + +#define chipcHw_REG_PLL_DIVIDER_NDIV_f_SS (0x00FFFFFF) /* To attain spread with max frequency */ + +#define chipcHw_REG_PLL_DIVIDER_NDIV_f 0 /* ndiv_frac = chipcHw_REG_PLL_DIVIDER_NDIV_f / + chipcHw_REG_PLL_DIVIDER_FRAC + = 0, when SS is disable + */ + +#define chipcHw_REG_PLL_DIVIDER_MDIV(vco, Hz) ((chipcHw_divide((vco), (Hz)) > 255) ? 0 : chipcHw_divide((vco), (Hz))) + +#define chipcHw_REG_ACLKClock_CLK_DIV_MASK 0x3 + +/* System booting strap options */ +#define chipcHw_STRAPS_SOFT_OVERRIDE 0x00000001 /* Software Strap Override */ + +#define chipcHw_STRAPS_BOOT_DEVICE_NAND_FLASH_8 0x00000000 /* 8 bit NAND FLASH Boot */ +#define chipcHw_STRAPS_BOOT_DEVICE_NOR_FLASH_16 0x00000002 /* 16 bit NOR FLASH Boot */ +#define chipcHw_STRAPS_BOOT_DEVICE_SERIAL_FLASH 0x00000004 /* Serial FLASH Boot */ +#define chipcHw_STRAPS_BOOT_DEVICE_NAND_FLASH_16 0x00000006 /* 16 bit NAND FLASH Boot */ +#define chipcHw_STRAPS_BOOT_DEVICE_UART 0x00000008 /* UART Boot */ +#define chipcHw_STRAPS_BOOT_DEVICE_MASK 0x0000000E /* Mask */ + +/* System boot option */ +#define chipcHw_STRAPS_BOOT_OPTION_BROM 0x00000000 /* Boot from Boot ROM */ +#define chipcHw_STRAPS_BOOT_OPTION_ARAM 0x00000020 /* Boot from ARAM */ +#define chipcHw_STRAPS_BOOT_OPTION_NOR 0x00000030 /* Boot from NOR flash */ + +/* NAND Flash page size strap options */ +#define chipcHw_STRAPS_NAND_PAGESIZE_512 0x00000000 /* NAND FLASH page size of 512 bytes */ +#define chipcHw_STRAPS_NAND_PAGESIZE_2048 0x00000040 /* NAND FLASH page size of 2048 bytes */ +#define chipcHw_STRAPS_NAND_PAGESIZE_4096 0x00000080 /* NAND FLASH page size of 4096 bytes */ +#define chipcHw_STRAPS_NAND_PAGESIZE_EXT 0x000000C0 /* NAND FLASH page of extened size */ +#define chipcHw_STRAPS_NAND_PAGESIZE_MASK 0x000000C0 /* Mask */ + +#define chipcHw_STRAPS_NAND_EXTRA_CYCLE 0x00000400 /* NAND FLASH address cycle configuration */ +#define chipcHw_STRAPS_REBOOT_TO_UART 0x00000800 /* Reboot to UART on error */ + +/* Secure boot mode strap options */ +#define chipcHw_STRAPS_BOOT_MODE_NORMAL 0x00000000 /* Normal Boot */ +#define chipcHw_STRAPS_BOOT_MODE_DBG_SW 0x00000100 /* Software debugging Boot */ +#define chipcHw_STRAPS_BOOT_MODE_DBG_BOOT 0x00000200 /* Boot rom debugging Boot */ +#define chipcHw_STRAPS_BOOT_MODE_NORMAL_QUIET 0x00000300 /* Normal Boot (Quiet BootRom) */ +#define chipcHw_STRAPS_BOOT_MODE_MASK 0x00000300 /* Mask */ + +/* Slave Mode straps */ +#define chipcHw_STRAPS_I2CS 0x02000000 /* I2C Slave */ +#define chipcHw_STRAPS_SPIS 0x01000000 /* SPI Slave */ + +/* Strap pin options */ +#define chipcHw_REG_SW_STRAPS ((pChipcHw->PinStraps & 0x0000FC00) >> 10) + +/* PIF/LCD pin sharing defines */ +#define chipcHw_REG_LCD_PIN_ENABLE 0x00000001 /* LCD Controller is used and the pins have LCD functions */ +#define chipcHw_REG_PIF_PIN_ENABLE 0x00000002 /* LCD pins are used to perform PIF functions */ + +#define chipcHw_GPIO_COUNT 61 /* Number of GPIO pin accessible thorugh CHIPC */ + +/* NOTE: Any changes to these constants will require a corresponding change to chipcHw_str.c */ +#define chipcHw_REG_GPIO_MUX_KEYPAD 0x00000001 /* GPIO mux for Keypad */ +#define chipcHw_REG_GPIO_MUX_I2CH 0x00000002 /* GPIO mux for I2CH */ +#define chipcHw_REG_GPIO_MUX_SPI 0x00000003 /* GPIO mux for SPI */ +#define chipcHw_REG_GPIO_MUX_UART 0x00000004 /* GPIO mux for UART */ +#define chipcHw_REG_GPIO_MUX_LEDMTXP 0x00000005 /* GPIO mux for LEDMTXP */ +#define chipcHw_REG_GPIO_MUX_LEDMTXS 0x00000006 /* GPIO mux for LEDMTXS */ +#define chipcHw_REG_GPIO_MUX_SDIO0 0x00000007 /* GPIO mux for SDIO0 */ +#define chipcHw_REG_GPIO_MUX_SDIO1 0x00000008 /* GPIO mux for SDIO1 */ +#define chipcHw_REG_GPIO_MUX_PCM 0x00000009 /* GPIO mux for PCM */ +#define chipcHw_REG_GPIO_MUX_I2S 0x0000000A /* GPIO mux for I2S */ +#define chipcHw_REG_GPIO_MUX_ETM 0x0000000B /* GPIO mux for ETM */ +#define chipcHw_REG_GPIO_MUX_DEBUG 0x0000000C /* GPIO mux for DEBUG */ +#define chipcHw_REG_GPIO_MUX_MISC 0x0000000D /* GPIO mux for MISC */ +#define chipcHw_REG_GPIO_MUX_GPIO 0x00000000 /* GPIO mux for GPIO */ +#define chipcHw_REG_GPIO_MUX(pin) (&pChipcHw->GpioMux_0_7 + ((pin) >> 3)) +#define chipcHw_REG_GPIO_MUX_POSITION(pin) (((pin) & 0x00000007) << 2) +#define chipcHw_REG_GPIO_MUX_MASK 0x0000000F /* Mask */ + +#define chipcHw_REG_SLEW_RATE_HIGH 0x00000000 /* High speed slew rate */ +#define chipcHw_REG_SLEW_RATE_NORMAL 0x00000008 /* Normal slew rate */ + /* Pins beyond 42 are defined by skipping 8 bits within the register */ +#define chipcHw_REG_SLEW_RATE(pin) (((pin) > 42) ? (&pChipcHw->GpioSR_0_7 + (((pin) + 2) >> 3)) : (&pChipcHw->GpioSR_0_7 + ((pin) >> 3))) +#define chipcHw_REG_SLEW_RATE_POSITION(pin) (((pin) > 42) ? ((((pin) + 2) & 0x00000007) << 2) : (((pin) & 0x00000007) << 2)) +#define chipcHw_REG_SLEW_RATE_MASK 0x00000008 /* Mask */ + +#define chipcHw_REG_CURRENT_STRENGTH_2mA 0x00000001 /* Current driving strength 2 milli ampere */ +#define chipcHw_REG_CURRENT_STRENGTH_4mA 0x00000002 /* Current driving strength 4 milli ampere */ +#define chipcHw_REG_CURRENT_STRENGTH_6mA 0x00000004 /* Current driving strength 6 milli ampere */ +#define chipcHw_REG_CURRENT_STRENGTH_8mA 0x00000005 /* Current driving strength 8 milli ampere */ +#define chipcHw_REG_CURRENT_STRENGTH_10mA 0x00000006 /* Current driving strength 10 milli ampere */ +#define chipcHw_REG_CURRENT_STRENGTH_12mA 0x00000007 /* Current driving strength 12 milli ampere */ +#define chipcHw_REG_CURRENT_MASK 0x00000007 /* Mask */ + /* Pins beyond 42 are defined by skipping 8 bits */ +#define chipcHw_REG_CURRENT(pin) (((pin) > 42) ? (&pChipcHw->GpioSR_0_7 + (((pin) + 2) >> 3)) : (&pChipcHw->GpioSR_0_7 + ((pin) >> 3))) +#define chipcHw_REG_CURRENT_POSITION(pin) (((pin) > 42) ? ((((pin) + 2) & 0x00000007) << 2) : (((pin) & 0x00000007) << 2)) + +#define chipcHw_REG_PULL_NONE 0x00000000 /* No pull up register */ +#define chipcHw_REG_PULL_UP 0x00000001 /* Pull up register enable */ +#define chipcHw_REG_PULL_DOWN 0x00000002 /* Pull down register enable */ +#define chipcHw_REG_PULLUP_MASK 0x00000003 /* Mask */ + /* Pins beyond 42 are defined by skipping 4 bits */ +#define chipcHw_REG_PULLUP(pin) (((pin) > 42) ? (&pChipcHw->GpioPull_0_15 + (((pin) + 2) >> 4)) : (&pChipcHw->GpioPull_0_15 + ((pin) >> 4))) +#define chipcHw_REG_PULLUP_POSITION(pin) (((pin) > 42) ? ((((pin) + 2) & 0x0000000F) << 1) : (((pin) & 0x0000000F) << 1)) + +#define chipcHw_REG_INPUTTYPE_CMOS 0x00000000 /* Normal CMOS logic */ +#define chipcHw_REG_INPUTTYPE_ST 0x00000001 /* High speed Schmitt Trigger */ +#define chipcHw_REG_INPUTTYPE_MASK 0x00000001 /* Mask */ + /* Pins beyond 42 are defined by skipping 2 bits */ +#define chipcHw_REG_INPUTTYPE(pin) (((pin) > 42) ? (&pChipcHw->GpioInput_0_31 + (((pin) + 2) >> 5)) : (&pChipcHw->GpioInput_0_31 + ((pin) >> 5))) +#define chipcHw_REG_INPUTTYPE_POSITION(pin) (((pin) > 42) ? ((((pin) + 2) & 0x0000001F)) : (((pin) & 0x0000001F))) + +/* Device connected to the bus clock */ +#define chipcHw_REG_BUS_CLOCK_ARM 0x00000001 /* Bus interface clock for ARM */ +#define chipcHw_REG_BUS_CLOCK_VDEC 0x00000002 /* Bus interface clock for VDEC */ +#define chipcHw_REG_BUS_CLOCK_ARAM 0x00000004 /* Bus interface clock for ARAM */ +#define chipcHw_REG_BUS_CLOCK_HPM 0x00000008 /* Bus interface clock for HPM */ +#define chipcHw_REG_BUS_CLOCK_DDRC 0x00000010 /* Bus interface clock for DDRC */ +#define chipcHw_REG_BUS_CLOCK_DMAC0 0x00000020 /* Bus interface clock for DMAC0 */ +#define chipcHw_REG_BUS_CLOCK_DMAC1 0x00000040 /* Bus interface clock for DMAC1 */ +#define chipcHw_REG_BUS_CLOCK_NVI 0x00000080 /* Bus interface clock for NVI */ +#define chipcHw_REG_BUS_CLOCK_ESW 0x00000100 /* Bus interface clock for ESW */ +#define chipcHw_REG_BUS_CLOCK_GE 0x00000200 /* Bus interface clock for GE */ +#define chipcHw_REG_BUS_CLOCK_I2CH 0x00000400 /* Bus interface clock for I2CH */ +#define chipcHw_REG_BUS_CLOCK_I2S0 0x00000800 /* Bus interface clock for I2S0 */ +#define chipcHw_REG_BUS_CLOCK_I2S1 0x00001000 /* Bus interface clock for I2S1 */ +#define chipcHw_REG_BUS_CLOCK_VRAM 0x00002000 /* Bus interface clock for VRAM */ +#define chipcHw_REG_BUS_CLOCK_CLCD 0x00004000 /* Bus interface clock for CLCD */ +#define chipcHw_REG_BUS_CLOCK_LDK 0x00008000 /* Bus interface clock for LDK */ +#define chipcHw_REG_BUS_CLOCK_LED 0x00010000 /* Bus interface clock for LED */ +#define chipcHw_REG_BUS_CLOCK_OTP 0x00020000 /* Bus interface clock for OTP */ +#define chipcHw_REG_BUS_CLOCK_PIF 0x00040000 /* Bus interface clock for PIF */ +#define chipcHw_REG_BUS_CLOCK_SPU 0x00080000 /* Bus interface clock for SPU */ +#define chipcHw_REG_BUS_CLOCK_SDIO0 0x00100000 /* Bus interface clock for SDIO0 */ +#define chipcHw_REG_BUS_CLOCK_SDIO1 0x00200000 /* Bus interface clock for SDIO1 */ +#define chipcHw_REG_BUS_CLOCK_SPIH 0x00400000 /* Bus interface clock for SPIH */ +#define chipcHw_REG_BUS_CLOCK_SPIS 0x00800000 /* Bus interface clock for SPIS */ +#define chipcHw_REG_BUS_CLOCK_UART0 0x01000000 /* Bus interface clock for UART0 */ +#define chipcHw_REG_BUS_CLOCK_UART1 0x02000000 /* Bus interface clock for UART1 */ +#define chipcHw_REG_BUS_CLOCK_BBL 0x04000000 /* Bus interface clock for BBL */ +#define chipcHw_REG_BUS_CLOCK_I2CS 0x08000000 /* Bus interface clock for I2CS */ +#define chipcHw_REG_BUS_CLOCK_USBH 0x10000000 /* Bus interface clock for USB Host */ +#define chipcHw_REG_BUS_CLOCK_USBD 0x20000000 /* Bus interface clock for USB Device */ +#define chipcHw_REG_BUS_CLOCK_BROM 0x40000000 /* Bus interface clock for Boot ROM */ +#define chipcHw_REG_BUS_CLOCK_TSC 0x80000000 /* Bus interface clock for Touch screen */ + +/* Software resets defines */ +#define chipcHw_REG_SOFT_RESET_VPM_GLOBAL_HOLD 0x0000000080000000ULL /* Reset Global VPM and hold */ +#define chipcHw_REG_SOFT_RESET_VPM_HOLD 0x0000000040000000ULL /* Reset VPM and hold */ +#define chipcHw_REG_SOFT_RESET_VPM_GLOBAL 0x0000000020000000ULL /* Reset Global VPM */ +#define chipcHw_REG_SOFT_RESET_VPM 0x0000000010000000ULL /* Reset VPM */ +#define chipcHw_REG_SOFT_RESET_KEYPAD 0x0000000008000000ULL /* Reset Key pad */ +#define chipcHw_REG_SOFT_RESET_LED 0x0000000004000000ULL /* Reset LED */ +#define chipcHw_REG_SOFT_RESET_SPU 0x0000000002000000ULL /* Reset SPU */ +#define chipcHw_REG_SOFT_RESET_RNG 0x0000000001000000ULL /* Reset RNG */ +#define chipcHw_REG_SOFT_RESET_PKA 0x0000000000800000ULL /* Reset PKA */ +#define chipcHw_REG_SOFT_RESET_LCD 0x0000000000400000ULL /* Reset LCD */ +#define chipcHw_REG_SOFT_RESET_PIF 0x0000000000200000ULL /* Reset PIF */ +#define chipcHw_REG_SOFT_RESET_I2CS 0x0000000000100000ULL /* Reset I2C Slave */ +#define chipcHw_REG_SOFT_RESET_I2CH 0x0000000000080000ULL /* Reset I2C Host */ +#define chipcHw_REG_SOFT_RESET_SDIO1 0x0000000000040000ULL /* Reset SDIO 1 */ +#define chipcHw_REG_SOFT_RESET_SDIO0 0x0000000000020000ULL /* Reset SDIO 0 */ +#define chipcHw_REG_SOFT_RESET_BBL 0x0000000000010000ULL /* Reset BBL */ +#define chipcHw_REG_SOFT_RESET_I2S1 0x0000000000008000ULL /* Reset I2S1 */ +#define chipcHw_REG_SOFT_RESET_I2S0 0x0000000000004000ULL /* Reset I2S0 */ +#define chipcHw_REG_SOFT_RESET_SPIS 0x0000000000002000ULL /* Reset SPI Slave */ +#define chipcHw_REG_SOFT_RESET_SPIH 0x0000000000001000ULL /* Reset SPI Host */ +#define chipcHw_REG_SOFT_RESET_GPIO1 0x0000000000000800ULL /* Reset GPIO block 1 */ +#define chipcHw_REG_SOFT_RESET_GPIO0 0x0000000000000400ULL /* Reset GPIO block 0 */ +#define chipcHw_REG_SOFT_RESET_UART1 0x0000000000000200ULL /* Reset UART 1 */ +#define chipcHw_REG_SOFT_RESET_UART0 0x0000000000000100ULL /* Reset UART 0 */ +#define chipcHw_REG_SOFT_RESET_NVI 0x0000000000000080ULL /* Reset NVI */ +#define chipcHw_REG_SOFT_RESET_WDOG 0x0000000000000040ULL /* Reset Watch dog */ +#define chipcHw_REG_SOFT_RESET_TMR 0x0000000000000020ULL /* Reset Timer */ +#define chipcHw_REG_SOFT_RESET_ETM 0x0000000000000010ULL /* Reset ETM */ +#define chipcHw_REG_SOFT_RESET_ARM_HOLD 0x0000000000000008ULL /* Reset ARM and HOLD */ +#define chipcHw_REG_SOFT_RESET_ARM 0x0000000000000004ULL /* Reset ARM */ +#define chipcHw_REG_SOFT_RESET_CHIP_WARM 0x0000000000000002ULL /* Chip warm reset */ +#define chipcHw_REG_SOFT_RESET_CHIP_SOFT 0x0000000000000001ULL /* Chip soft reset */ +#define chipcHw_REG_SOFT_RESET_VDEC 0x0000100000000000ULL /* Video decoder */ +#define chipcHw_REG_SOFT_RESET_GE 0x0000080000000000ULL /* Graphics engine */ +#define chipcHw_REG_SOFT_RESET_OTP 0x0000040000000000ULL /* Reset OTP */ +#define chipcHw_REG_SOFT_RESET_USB2 0x0000020000000000ULL /* Reset USB2 */ +#define chipcHw_REG_SOFT_RESET_USB1 0x0000010000000000ULL /* Reset USB 1 */ +#define chipcHw_REG_SOFT_RESET_USB 0x0000008000000000ULL /* Reset USB 1 and USB2 soft reset */ +#define chipcHw_REG_SOFT_RESET_ESW 0x0000004000000000ULL /* Reset Ethernet switch */ +#define chipcHw_REG_SOFT_RESET_ESWCLK 0x0000002000000000ULL /* Reset Ethernet switch clock */ +#define chipcHw_REG_SOFT_RESET_DDRPHY 0x0000001000000000ULL /* Reset DDR Physical */ +#define chipcHw_REG_SOFT_RESET_DDR 0x0000000800000000ULL /* Reset DDR Controller */ +#define chipcHw_REG_SOFT_RESET_TSC 0x0000000400000000ULL /* Reset Touch screen */ +#define chipcHw_REG_SOFT_RESET_PCM 0x0000000200000000ULL /* Reset PCM device */ +#define chipcHw_REG_SOFT_RESET_APM 0x0000200100000000ULL /* Reset APM device */ + +#define chipcHw_REG_SOFT_RESET_VPM_GLOBAL_UNHOLD 0x8000000000000000ULL /* Unhold Global VPM */ +#define chipcHw_REG_SOFT_RESET_VPM_UNHOLD 0x4000000000000000ULL /* Unhold VPM */ +#define chipcHw_REG_SOFT_RESET_ARM_UNHOLD 0x2000000000000000ULL /* Unhold ARM reset */ +#define chipcHw_REG_SOFT_RESET_UNHOLD_MASK 0xF000000000000000ULL /* Mask to handle unhold request */ + +/* Audio channel control defines */ +#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_ALL 0x00000001 /* Enable all audio channel */ +#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_A 0x00000002 /* Enable channel A */ +#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_B 0x00000004 /* Enable channel B */ +#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_C 0x00000008 /* Enable channel C */ +#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_NTP_CLOCK 0x00000010 /* Enable NTP clock */ +#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_PCM0_CLOCK 0x00000020 /* Enable PCM0 clock */ +#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_PCM1_CLOCK 0x00000040 /* Enable PCM1 clock */ +#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_APM_CLOCK 0x00000080 /* Enable APM clock */ + +/* Misc. chip control defines */ +#define chipcHw_REG_MISC_CTRL_GE_SEL 0x00040000 /* Select GE2/GE3 */ +#define chipcHw_REG_MISC_CTRL_I2S1_CLOCK_ONCHIP 0x00000000 /* Use on chip clock for I2S1 */ +#define chipcHw_REG_MISC_CTRL_I2S1_CLOCK_GPIO 0x00020000 /* Use external clock via GPIO pin 26 for I2S1 */ +#define chipcHw_REG_MISC_CTRL_I2S0_CLOCK_ONCHIP 0x00000000 /* Use on chip clock for I2S0 */ +#define chipcHw_REG_MISC_CTRL_I2S0_CLOCK_GPIO 0x00010000 /* Use external clock via GPIO pin 45 for I2S0 */ +#define chipcHw_REG_MISC_CTRL_ARM_CP15_DISABLE 0x00008000 /* Disable ARM CP15 bit */ +#define chipcHw_REG_MISC_CTRL_RTC_DISABLE 0x00000008 /* Disable RTC registers */ +#define chipcHw_REG_MISC_CTRL_BBRAM_DISABLE 0x00000004 /* Disable Battery Backed RAM */ +#define chipcHw_REG_MISC_CTRL_USB_MODE_HOST 0x00000002 /* Set USB as host */ +#define chipcHw_REG_MISC_CTRL_USB_MODE_DEVICE 0xFFFFFFFD /* Set USB as device */ +#define chipcHw_REG_MISC_CTRL_USB_POWERON 0xFFFFFFFE /* Power up USB */ +#define chipcHw_REG_MISC_CTRL_USB_POWEROFF 0x00000001 /* Power down USB */ + +/* OTP configuration defines */ +#define chipcHw_REG_OTP_SECURITY_OFF 0x0000020000000000ULL /* Security support is OFF */ +#define chipcHw_REG_OTP_SPU_SLOW 0x0000010000000000ULL /* Limited SPU throughput */ +#define chipcHw_REG_OTP_LCD_SPEED 0x0000000600000000ULL /* Set VPM speed one */ +#define chipcHw_REG_OTP_VPM_SPEED_1 0x0000000100000000ULL /* Set VPM speed one */ +#define chipcHw_REG_OTP_VPM_SPEED_0 0x0000000080000000ULL /* Set VPM speed zero */ +#define chipcHw_REG_OTP_AXI_SPEED 0x0000000060000000ULL /* Set maximum AXI bus speed */ +#define chipcHw_REG_OTP_APM_DISABLE 0x000000001F000000ULL /* Disable APM */ +#define chipcHw_REG_OTP_PIF_DISABLE 0x0000000000200000ULL /* Disable PIF */ +#define chipcHw_REG_OTP_VDEC_DISABLE 0x0000000000100000ULL /* Disable Video decoder */ +#define chipcHw_REG_OTP_BBL_DISABLE 0x0000000000080000ULL /* Disable RTC and BBRAM */ +#define chipcHw_REG_OTP_LED_DISABLE 0x0000000000040000ULL /* Disable LED */ +#define chipcHw_REG_OTP_GE_DISABLE 0x0000000000020000ULL /* Disable Graphics Engine */ +#define chipcHw_REG_OTP_LCD_DISABLE 0x0000000000010000ULL /* Disable LCD */ +#define chipcHw_REG_OTP_KEYPAD_DISABLE 0x0000000000008000ULL /* Disable keypad */ +#define chipcHw_REG_OTP_UART_DISABLE 0x0000000000004000ULL /* Disable UART */ +#define chipcHw_REG_OTP_SDIOH_DISABLE 0x0000000000003000ULL /* Disable SDIO host */ +#define chipcHw_REG_OTP_HSS_DISABLE 0x0000000000000C00ULL /* Disable HSS */ +#define chipcHw_REG_OTP_TSC_DISABLE 0x0000000000000200ULL /* Disable touch screen */ +#define chipcHw_REG_OTP_USB_DISABLE 0x0000000000000180ULL /* Disable USB */ +#define chipcHw_REG_OTP_SGMII_DISABLE 0x0000000000000060ULL /* Disable SGMII */ +#define chipcHw_REG_OTP_ETH_DISABLE 0x0000000000000018ULL /* Disable gigabit ethernet */ +#define chipcHw_REG_OTP_ETH_PHY_DISABLE 0x0000000000000006ULL /* Disable ethernet PHY */ +#define chipcHw_REG_OTP_VPM_DISABLE 0x0000000000000001ULL /* Disable VPM */ + +/* Sticky bit defines */ +#define chipcHw_REG_STICKY_BOOT_DONE 0x00000001 /* Boot done */ +#define chipcHw_REG_STICKY_SOFT_RESET 0x00000002 /* ARM soft reset */ +#define chipcHw_REG_STICKY_GENERAL_1 0x00000004 /* General purpose bit 1 */ +#define chipcHw_REG_STICKY_GENERAL_2 0x00000008 /* General purpose bit 2 */ +#define chipcHw_REG_STICKY_GENERAL_3 0x00000010 /* General purpose bit 3 */ +#define chipcHw_REG_STICKY_GENERAL_4 0x00000020 /* General purpose bit 4 */ +#define chipcHw_REG_STICKY_GENERAL_5 0x00000040 /* General purpose bit 5 */ +#define chipcHw_REG_STICKY_POR_BROM 0x00000080 /* Special sticky bit for security - set in BROM to avoid other modes being entered */ +#define chipcHw_REG_STICKY_ARM_RESET 0x00000100 /* ARM reset */ +#define chipcHw_REG_STICKY_CHIP_SOFT_RESET 0x00000200 /* Chip soft reset */ +#define chipcHw_REG_STICKY_CHIP_WARM_RESET 0x00000400 /* Chip warm reset */ +#define chipcHw_REG_STICKY_WDOG_RESET 0x00000800 /* Watchdog reset */ +#define chipcHw_REG_STICKY_OTP_RESET 0x00001000 /* OTP reset */ + + /* HW phase alignment defines *//* Spare1 register definitions */ +#define chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE 0x80000000 /* Enable DDR phase align panic interrupt */ +#define chipcHw_REG_SPARE1_VPM_PHASE_INTR_ENABLE 0x40000000 /* Enable VPM phase align panic interrupt */ +#define chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE 0x00000002 /* Enable access to VPM using system BUS */ +#define chipcHw_REG_SPARE1_DDR_BUS_ACCESS_ENABLE 0x00000001 /* Enable access to DDR using system BUS */ + /* DDRPhaseCtrl1 register definitions */ +#define chipcHw_REG_DDR_SW_PHASE_CTRL_ENABLE 0x80000000 /* Enable DDR SW phase alignment */ +#define chipcHw_REG_DDR_HW_PHASE_CTRL_ENABLE 0x40000000 /* Enable DDR HW phase alignment */ +#define chipcHw_REG_DDR_PHASE_VALUE_GE_MASK 0x0000007F /* DDR lower threshold for phase alignment */ +#define chipcHw_REG_DDR_PHASE_VALUE_GE_SHIFT 23 +#define chipcHw_REG_DDR_PHASE_VALUE_LE_MASK 0x0000007F /* DDR upper threshold for phase alignment */ +#define chipcHw_REG_DDR_PHASE_VALUE_LE_SHIFT 16 +#define chipcHw_REG_DDR_PHASE_ALIGN_WAIT_CYCLE_MASK 0x0000FFFF /* BUS Cycle to wait to run next DDR phase alignment */ +#define chipcHw_REG_DDR_PHASE_ALIGN_WAIT_CYCLE_SHIFT 0 + /* VPMPhaseCtrl1 register definitions */ +#define chipcHw_REG_VPM_SW_PHASE_CTRL_ENABLE 0x80000000 /* Enable VPM SW phase alignment */ +#define chipcHw_REG_VPM_HW_PHASE_CTRL_ENABLE 0x40000000 /* Enable VPM HW phase alignment */ +#define chipcHw_REG_VPM_PHASE_VALUE_GE_MASK 0x0000007F /* VPM lower threshold for phase alignment */ +#define chipcHw_REG_VPM_PHASE_VALUE_GE_SHIFT 23 +#define chipcHw_REG_VPM_PHASE_VALUE_LE_MASK 0x0000007F /* VPM upper threshold for phase alignment */ +#define chipcHw_REG_VPM_PHASE_VALUE_LE_SHIFT 16 +#define chipcHw_REG_VPM_PHASE_ALIGN_WAIT_CYCLE_MASK 0x0000FFFF /* BUS Cycle to wait to complete the VPM phase alignment */ +#define chipcHw_REG_VPM_PHASE_ALIGN_WAIT_CYCLE_SHIFT 0 + /* PhaseAlignStatus register definitions */ +#define chipcHw_REG_DDR_TIMEOUT_INTR_STATUS 0x80000000 /* DDR time out interrupt status */ +#define chipcHw_REG_DDR_PHASE_STATUS_MASK 0x0000007F /* DDR phase status value */ +#define chipcHw_REG_DDR_PHASE_STATUS_SHIFT 24 +#define chipcHw_REG_DDR_PHASE_ALIGNED 0x00800000 /* DDR Phase aligned status */ +#define chipcHw_REG_DDR_LOAD 0x00400000 /* Load DDR phase status */ +#define chipcHw_REG_DDR_PHASE_CTRL_MASK 0x0000003F /* DDR phase control value */ +#define chipcHw_REG_DDR_PHASE_CTRL_SHIFT 16 +#define chipcHw_REG_VPM_TIMEOUT_INTR_STATUS 0x80000000 /* VPM time out interrupt status */ +#define chipcHw_REG_VPM_PHASE_STATUS_MASK 0x0000007F /* VPM phase status value */ +#define chipcHw_REG_VPM_PHASE_STATUS_SHIFT 8 +#define chipcHw_REG_VPM_PHASE_ALIGNED 0x00000080 /* VPM Phase aligned status */ +#define chipcHw_REG_VPM_LOAD 0x00000040 /* Load VPM phase status */ +#define chipcHw_REG_VPM_PHASE_CTRL_MASK 0x0000003F /* VPM phase control value */ +#define chipcHw_REG_VPM_PHASE_CTRL_SHIFT 0 + /* DDRPhaseCtrl2 register definitions */ +#define chipcHw_REG_DDR_INTR_SERVICED 0x02000000 /* Acknowledge that interrupt was serviced */ +#define chipcHw_REG_DDR_TIMEOUT_INTR_ENABLE 0x01000000 /* Enable time out interrupt */ +#define chipcHw_REG_DDR_LOAD_COUNT_PHASE_CTRL_MASK 0x0000000F /* Wait before toggling load_ch */ +#define chipcHw_REG_DDR_LOAD_COUNT_PHASE_CTRL_SHIFT 20 +#define chipcHw_REG_DDR_TOTAL_LOAD_COUNT_CTRL_MASK 0x0000000F /* Total wait to settle ph_ctrl and load_ch */ +#define chipcHw_REG_DDR_TOTAL_LOAD_COUNT_CTRL_SHIFT 16 +#define chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_MASK 0x0000FFFF /* Time out value for DDR HW phase alignment */ +#define chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_SHIFT 0 + /* VPMPhaseCtrl2 register definitions */ +#define chipcHw_REG_VPM_INTR_SELECT_MASK 0x00000003 /* Interrupt select */ +#define chipcHw_REG_VPM_INTR_SELECT_SHIFT 26 +#define chipcHw_REG_VPM_INTR_DISABLE 0x00000000 +#define chipcHw_REG_VPM_INTR_FAST (0x1 << chipcHw_REG_VPM_INTR_SELECT_SHIFT) +#define chipcHw_REG_VPM_INTR_MEDIUM (0x2 << chipcHw_REG_VPM_INTR_SELECT_SHIFT) +#define chipcHw_REG_VPM_INTR_SLOW (0x3 << chipcHw_REG_VPM_INTR_SELECT_SHIFT) +#define chipcHw_REG_VPM_INTR_SERVICED 0x02000000 /* Acknowledge that interrupt was serviced */ +#define chipcHw_REG_VPM_TIMEOUT_INTR_ENABLE 0x01000000 /* Enable time out interrupt */ +#define chipcHw_REG_VPM_LOAD_COUNT_PHASE_CTRL_MASK 0x0000000F /* Wait before toggling load_ch */ +#define chipcHw_REG_VPM_LOAD_COUNT_PHASE_CTRL_SHIFT 20 +#define chipcHw_REG_VPM_TOTAL_LOAD_COUNT_CTRL_MASK 0x0000000F /* Total wait cycle to settle ph_ctrl and load_ch */ +#define chipcHw_REG_VPM_TOTAL_LOAD_COUNT_CTRL_SHIFT 16 +#define chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_MASK 0x0000FFFF /* Time out value for VPM HW phase alignment */ +#define chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_SHIFT 0 + +#endif /* CHIPCHW_REG_H */ -- cgit v1.2.3