From 849369d6c66d3054688672f97d31fceb8e8230fb Mon Sep 17 00:00:00 2001 From: root Date: Fri, 25 Dec 2015 04:40:36 +0000 Subject: initial_commit --- arch/powerpc/kernel/entry_64.S | 1104 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1104 insertions(+) create mode 100644 arch/powerpc/kernel/entry_64.S (limited to 'arch/powerpc/kernel/entry_64.S') diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S new file mode 100644 index 00000000..d8344251 --- /dev/null +++ b/arch/powerpc/kernel/entry_64.S @@ -0,0 +1,1104 @@ +/* + * PowerPC version + * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) + * Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP + * Copyright (C) 1996 Cort Dougan + * Adapted for Power Macintosh by Paul Mackerras. + * Low-level exception handlers and MMU support + * rewritten by Paul Mackerras. + * Copyright (C) 1996 Paul Mackerras. + * MPC8xx modifications Copyright (C) 1997 Dan Malek (dmalek@jlc.net). + * + * This file contains the system call entry code, context switch + * code, and exception/interrupt return code for PowerPC. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * System calls. + */ + .section ".toc","aw" +.SYS_CALL_TABLE: + .tc .sys_call_table[TC],.sys_call_table + +/* This value is used to mark exception frames on the stack. */ +exception_marker: + .tc ID_EXC_MARKER[TC],STACK_FRAME_REGS_MARKER + + .section ".text" + .align 7 + +#undef SHOW_SYSCALLS + + .globl system_call_common +system_call_common: + andi. r10,r12,MSR_PR + mr r10,r1 + addi r1,r1,-INT_FRAME_SIZE + beq- 1f + ld r1,PACAKSAVE(r13) +1: std r10,0(r1) + std r11,_NIP(r1) + std r12,_MSR(r1) + std r0,GPR0(r1) + std r10,GPR1(r1) + ACCOUNT_CPU_USER_ENTRY(r10, r11) + /* + * This "crclr so" clears CR0.SO, which is the error indication on + * return from this system call. There must be no cmp instruction + * between it and the "mfcr r9" below, otherwise if XER.SO is set, + * CR0.SO will get set, causing all system calls to appear to fail. + */ + crclr so + std r2,GPR2(r1) + std r3,GPR3(r1) + std r4,GPR4(r1) + std r5,GPR5(r1) + std r6,GPR6(r1) + std r7,GPR7(r1) + std r8,GPR8(r1) + li r11,0 + std r11,GPR9(r1) + std r11,GPR10(r1) + std r11,GPR11(r1) + std r11,GPR12(r1) + std r9,GPR13(r1) + mfcr r9 + mflr r10 + li r11,0xc01 + std r9,_CCR(r1) + std r10,_LINK(r1) + std r11,_TRAP(r1) + mfxer r9 + mfctr r10 + std r9,_XER(r1) + std r10,_CTR(r1) + std r3,ORIG_GPR3(r1) + ld r2,PACATOC(r13) + addi r9,r1,STACK_FRAME_OVERHEAD + ld r11,exception_marker@toc(r2) + std r11,-16(r9) /* "regshere" marker */ +#if defined(CONFIG_VIRT_CPU_ACCOUNTING) && defined(CONFIG_PPC_SPLPAR) +BEGIN_FW_FTR_SECTION + beq 33f + /* if from user, see if there are any DTL entries to process */ + ld r10,PACALPPACAPTR(r13) /* get ptr to VPA */ + ld r11,PACA_DTL_RIDX(r13) /* get log read index */ + ld r10,LPPACA_DTLIDX(r10) /* get log write index */ + cmpd cr1,r11,r10 + beq+ cr1,33f + bl .accumulate_stolen_time + REST_GPR(0,r1) + REST_4GPRS(3,r1) + REST_2GPRS(7,r1) + addi r9,r1,STACK_FRAME_OVERHEAD +33: +END_FW_FTR_SECTION_IFSET(FW_FEATURE_SPLPAR) +#endif /* CONFIG_VIRT_CPU_ACCOUNTING && CONFIG_PPC_SPLPAR */ + +#ifdef CONFIG_TRACE_IRQFLAGS + bl .trace_hardirqs_on + REST_GPR(0,r1) + REST_4GPRS(3,r1) + REST_2GPRS(7,r1) + addi r9,r1,STACK_FRAME_OVERHEAD + ld r12,_MSR(r1) +#endif /* CONFIG_TRACE_IRQFLAGS */ + li r10,1 + stb r10,PACASOFTIRQEN(r13) + stb r10,PACAHARDIRQEN(r13) + std r10,SOFTE(r1) +#ifdef CONFIG_PPC_ISERIES +BEGIN_FW_FTR_SECTION + /* Hack for handling interrupts when soft-enabling on iSeries */ + cmpdi cr1,r0,0x5555 /* syscall 0x5555 */ + andi. r10,r12,MSR_PR /* from kernel */ + crand 4*cr0+eq,4*cr1+eq,4*cr0+eq + bne 2f + b hardware_interrupt_entry +2: +END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) +#endif /* CONFIG_PPC_ISERIES */ + + /* Hard enable interrupts */ +#ifdef CONFIG_PPC_BOOK3E + wrteei 1 +#else + mfmsr r11 + ori r11,r11,MSR_EE + mtmsrd r11,1 +#endif /* CONFIG_PPC_BOOK3E */ + +#ifdef SHOW_SYSCALLS + bl .do_show_syscall + REST_GPR(0,r1) + REST_4GPRS(3,r1) + REST_2GPRS(7,r1) + addi r9,r1,STACK_FRAME_OVERHEAD +#endif + clrrdi r11,r1,THREAD_SHIFT + ld r10,TI_FLAGS(r11) + andi. r11,r10,_TIF_SYSCALL_T_OR_A + bne- syscall_dotrace +syscall_dotrace_cont: + cmpldi 0,r0,NR_syscalls + bge- syscall_enosys + +system_call: /* label this so stack traces look sane */ +/* + * Need to vector to 32 Bit or default sys_call_table here, + * based on caller's run-mode / personality. + */ + ld r11,.SYS_CALL_TABLE@toc(2) + andi. r10,r10,_TIF_32BIT + beq 15f + addi r11,r11,8 /* use 32-bit syscall entries */ + clrldi r3,r3,32 + clrldi r4,r4,32 + clrldi r5,r5,32 + clrldi r6,r6,32 + clrldi r7,r7,32 + clrldi r8,r8,32 +15: + slwi r0,r0,4 + ldx r10,r11,r0 /* Fetch system call handler [ptr] */ + mtctr r10 + bctrl /* Call handler */ + +syscall_exit: + std r3,RESULT(r1) +#ifdef SHOW_SYSCALLS + bl .do_show_syscall_exit + ld r3,RESULT(r1) +#endif + clrrdi r12,r1,THREAD_SHIFT + + ld r8,_MSR(r1) +#ifdef CONFIG_PPC_BOOK3S + /* No MSR:RI on BookE */ + andi. r10,r8,MSR_RI + beq- unrecov_restore +#endif + + /* Disable interrupts so current_thread_info()->flags can't change, + * and so that we don't get interrupted after loading SRR0/1. + */ +#ifdef CONFIG_PPC_BOOK3E + wrteei 0 +#else + mfmsr r10 + rldicl r10,r10,48,1 + rotldi r10,r10,16 + mtmsrd r10,1 +#endif /* CONFIG_PPC_BOOK3E */ + + ld r9,TI_FLAGS(r12) + li r11,-_LAST_ERRNO + andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP|_TIF_USER_WORK_MASK|_TIF_PERSYSCALL_MASK) + bne- syscall_exit_work + cmpld r3,r11 + ld r5,_CCR(r1) + bge- syscall_error +syscall_error_cont: + ld r7,_NIP(r1) +BEGIN_FTR_SECTION + stdcx. r0,0,r1 /* to clear the reservation */ +END_FTR_SECTION_IFCLR(CPU_FTR_STCX_CHECKS_ADDRESS) + andi. r6,r8,MSR_PR + ld r4,_LINK(r1) + /* + * Clear RI before restoring r13. If we are returning to + * userspace and we take an exception after restoring r13, + * we end up corrupting the userspace r13 value. + */ +#ifdef CONFIG_PPC_BOOK3S + /* No MSR:RI on BookE */ + li r12,MSR_RI + andc r11,r10,r12 + mtmsrd r11,1 /* clear MSR.RI */ +#endif /* CONFIG_PPC_BOOK3S */ + + beq- 1f + ACCOUNT_CPU_USER_EXIT(r11, r12) + ld r13,GPR13(r1) /* only restore r13 if returning to usermode */ +1: ld r2,GPR2(r1) + ld r1,GPR1(r1) + mtlr r4 + mtcr r5 + mtspr SPRN_SRR0,r7 + mtspr SPRN_SRR1,r8 + RFI + b . /* prevent speculative execution */ + +syscall_error: + oris r5,r5,0x1000 /* Set SO bit in CR */ + neg r3,r3 + std r5,_CCR(r1) + b syscall_error_cont + +/* Traced system call support */ +syscall_dotrace: + bl .save_nvgprs + addi r3,r1,STACK_FRAME_OVERHEAD + bl .do_syscall_trace_enter + /* + * Restore argument registers possibly just changed. + * We use the return value of do_syscall_trace_enter + * for the call number to look up in the table (r0). + */ + mr r0,r3 + ld r3,GPR3(r1) + ld r4,GPR4(r1) + ld r5,GPR5(r1) + ld r6,GPR6(r1) + ld r7,GPR7(r1) + ld r8,GPR8(r1) + addi r9,r1,STACK_FRAME_OVERHEAD + clrrdi r10,r1,THREAD_SHIFT + ld r10,TI_FLAGS(r10) + b syscall_dotrace_cont + +syscall_enosys: + li r3,-ENOSYS + b syscall_exit + +syscall_exit_work: + /* If TIF_RESTOREALL is set, don't scribble on either r3 or ccr. + If TIF_NOERROR is set, just save r3 as it is. */ + + andi. r0,r9,_TIF_RESTOREALL + beq+ 0f + REST_NVGPRS(r1) + b 2f +0: cmpld r3,r11 /* r10 is -LAST_ERRNO */ + blt+ 1f + andi. r0,r9,_TIF_NOERROR + bne- 1f + ld r5,_CCR(r1) + neg r3,r3 + oris r5,r5,0x1000 /* Set SO bit in CR */ + std r5,_CCR(r1) +1: std r3,GPR3(r1) +2: andi. r0,r9,(_TIF_PERSYSCALL_MASK) + beq 4f + + /* Clear per-syscall TIF flags if any are set. */ + + li r11,_TIF_PERSYSCALL_MASK + addi r12,r12,TI_FLAGS +3: ldarx r10,0,r12 + andc r10,r10,r11 + stdcx. r10,0,r12 + bne- 3b + subi r12,r12,TI_FLAGS + +4: /* Anything else left to do? */ + andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP) + beq .ret_from_except_lite + + /* Re-enable interrupts */ +#ifdef CONFIG_PPC_BOOK3E + wrteei 1 +#else + mfmsr r10 + ori r10,r10,MSR_EE + mtmsrd r10,1 +#endif /* CONFIG_PPC_BOOK3E */ + + bl .save_nvgprs + addi r3,r1,STACK_FRAME_OVERHEAD + bl .do_syscall_trace_leave + b .ret_from_except + +/* Save non-volatile GPRs, if not already saved. */ +_GLOBAL(save_nvgprs) + ld r11,_TRAP(r1) + andi. r0,r11,1 + beqlr- + SAVE_NVGPRS(r1) + clrrdi r0,r11,1 + std r0,_TRAP(r1) + blr + + +/* + * The sigsuspend and rt_sigsuspend system calls can call do_signal + * and thus put the process into the stopped state where we might + * want to examine its user state with ptrace. Therefore we need + * to save all the nonvolatile registers (r14 - r31) before calling + * the C code. Similarly, fork, vfork and clone need the full + * register state on the stack so that it can be copied to the child. + */ + +_GLOBAL(ppc_fork) + bl .save_nvgprs + bl .sys_fork + b syscall_exit + +_GLOBAL(ppc_vfork) + bl .save_nvgprs + bl .sys_vfork + b syscall_exit + +_GLOBAL(ppc_clone) + bl .save_nvgprs + bl .sys_clone + b syscall_exit + +_GLOBAL(ppc32_swapcontext) + bl .save_nvgprs + bl .compat_sys_swapcontext + b syscall_exit + +_GLOBAL(ppc64_swapcontext) + bl .save_nvgprs + bl .sys_swapcontext + b syscall_exit + +_GLOBAL(ret_from_fork) + bl .schedule_tail + REST_NVGPRS(r1) + li r3,0 + b syscall_exit + +/* + * This routine switches between two different tasks. The process + * state of one is saved on its kernel stack. Then the state + * of the other is restored from its kernel stack. The memory + * management hardware is updated to the second process's state. + * Finally, we can return to the second process, via ret_from_except. + * On entry, r3 points to the THREAD for the current task, r4 + * points to the THREAD for the new task. + * + * Note: there are two ways to get to the "going out" portion + * of this code; either by coming in via the entry (_switch) + * or via "fork" which must set up an environment equivalent + * to the "_switch" path. If you change this you'll have to change + * the fork code also. + * + * The code which creates the new task context is in 'copy_thread' + * in arch/powerpc/kernel/process.c + */ + .align 7 +_GLOBAL(_switch) + mflr r0 + std r0,16(r1) + stdu r1,-SWITCH_FRAME_SIZE(r1) + /* r3-r13 are caller saved -- Cort */ + SAVE_8GPRS(14, r1) + SAVE_10GPRS(22, r1) + mflr r20 /* Return to switch caller */ + mfmsr r22 + li r0, MSR_FP +#ifdef CONFIG_VSX +BEGIN_FTR_SECTION + oris r0,r0,MSR_VSX@h /* Disable VSX */ +END_FTR_SECTION_IFSET(CPU_FTR_VSX) +#endif /* CONFIG_VSX */ +#ifdef CONFIG_ALTIVEC +BEGIN_FTR_SECTION + oris r0,r0,MSR_VEC@h /* Disable altivec */ + mfspr r24,SPRN_VRSAVE /* save vrsave register value */ + std r24,THREAD_VRSAVE(r3) +END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) +#endif /* CONFIG_ALTIVEC */ +#ifdef CONFIG_PPC64 +BEGIN_FTR_SECTION + mfspr r25,SPRN_DSCR + std r25,THREAD_DSCR(r3) +END_FTR_SECTION_IFSET(CPU_FTR_DSCR) +#endif + and. r0,r0,r22 + beq+ 1f + andc r22,r22,r0 + MTMSRD(r22) + isync +1: std r20,_NIP(r1) + mfcr r23 + std r23,_CCR(r1) + std r1,KSP(r3) /* Set old stack pointer */ + +#ifdef CONFIG_SMP + /* We need a sync somewhere here to make sure that if the + * previous task gets rescheduled on another CPU, it sees all + * stores it has performed on this one. + */ + sync +#endif /* CONFIG_SMP */ + + /* + * If we optimise away the clear of the reservation in system + * calls because we know the CPU tracks the address of the + * reservation, then we need to clear it here to cover the + * case that the kernel context switch path has no larx + * instructions. + */ +BEGIN_FTR_SECTION + ldarx r6,0,r1 +END_FTR_SECTION_IFSET(CPU_FTR_STCX_CHECKS_ADDRESS) + + addi r6,r4,-THREAD /* Convert THREAD to 'current' */ + std r6,PACACURRENT(r13) /* Set new 'current' */ + + ld r8,KSP(r4) /* new stack pointer */ +#ifdef CONFIG_PPC_BOOK3S +BEGIN_FTR_SECTION + BEGIN_FTR_SECTION_NESTED(95) + clrrdi r6,r8,28 /* get its ESID */ + clrrdi r9,r1,28 /* get current sp ESID */ + FTR_SECTION_ELSE_NESTED(95) + clrrdi r6,r8,40 /* get its 1T ESID */ + clrrdi r9,r1,40 /* get current sp 1T ESID */ + ALT_MMU_FTR_SECTION_END_NESTED_IFCLR(MMU_FTR_1T_SEGMENT, 95) +FTR_SECTION_ELSE + b 2f +ALT_MMU_FTR_SECTION_END_IFSET(MMU_FTR_SLB) + clrldi. r0,r6,2 /* is new ESID c00000000? */ + cmpd cr1,r6,r9 /* or is new ESID the same as current ESID? */ + cror eq,4*cr1+eq,eq + beq 2f /* if yes, don't slbie it */ + + /* Bolt in the new stack SLB entry */ + ld r7,KSP_VSID(r4) /* Get new stack's VSID */ + oris r0,r6,(SLB_ESID_V)@h + ori r0,r0,(SLB_NUM_BOLTED-1)@l +BEGIN_FTR_SECTION + li r9,MMU_SEGSIZE_1T /* insert B field */ + oris r6,r6,(MMU_SEGSIZE_1T << SLBIE_SSIZE_SHIFT)@h + rldimi r7,r9,SLB_VSID_SSIZE_SHIFT,0 +END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT) + + /* Update the last bolted SLB. No write barriers are needed + * here, provided we only update the current CPU's SLB shadow + * buffer. + */ + ld r9,PACA_SLBSHADOWPTR(r13) + li r12,0 + std r12,SLBSHADOW_STACKESID(r9) /* Clear ESID */ + std r7,SLBSHADOW_STACKVSID(r9) /* Save VSID */ + std r0,SLBSHADOW_STACKESID(r9) /* Save ESID */ + + /* No need to check for MMU_FTR_NO_SLBIE_B here, since when + * we have 1TB segments, the only CPUs known to have the errata + * only support less than 1TB of system memory and we'll never + * actually hit this code path. + */ + + slbie r6 + slbie r6 /* Workaround POWER5 < DD2.1 issue */ + slbmte r7,r0 + isync +2: +#endif /* !CONFIG_PPC_BOOK3S */ + + clrrdi r7,r8,THREAD_SHIFT /* base of new stack */ + /* Note: this uses SWITCH_FRAME_SIZE rather than INT_FRAME_SIZE + because we don't need to leave the 288-byte ABI gap at the + top of the kernel stack. */ + addi r7,r7,THREAD_SIZE-SWITCH_FRAME_SIZE + + mr r1,r8 /* start using new stack pointer */ + std r7,PACAKSAVE(r13) + + ld r6,_CCR(r1) + mtcrf 0xFF,r6 + +#ifdef CONFIG_ALTIVEC +BEGIN_FTR_SECTION + ld r0,THREAD_VRSAVE(r4) + mtspr SPRN_VRSAVE,r0 /* if G4, restore VRSAVE reg */ +END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) +#endif /* CONFIG_ALTIVEC */ +#ifdef CONFIG_PPC64 +BEGIN_FTR_SECTION + ld r0,THREAD_DSCR(r4) + cmpd r0,r25 + beq 1f + mtspr SPRN_DSCR,r0 +1: +END_FTR_SECTION_IFSET(CPU_FTR_DSCR) +#endif + + /* r3-r13 are destroyed -- Cort */ + REST_8GPRS(14, r1) + REST_10GPRS(22, r1) + + /* convert old thread to its task_struct for return value */ + addi r3,r3,-THREAD + ld r7,_NIP(r1) /* Return to _switch caller in new task */ + mtlr r7 + addi r1,r1,SWITCH_FRAME_SIZE + blr + + .align 7 +_GLOBAL(ret_from_except) + ld r11,_TRAP(r1) + andi. r0,r11,1 + bne .ret_from_except_lite + REST_NVGPRS(r1) + +_GLOBAL(ret_from_except_lite) + /* + * Disable interrupts so that current_thread_info()->flags + * can't change between when we test it and when we return + * from the interrupt. + */ +#ifdef CONFIG_PPC_BOOK3E + wrteei 0 +#else + mfmsr r10 /* Get current interrupt state */ + rldicl r9,r10,48,1 /* clear MSR_EE */ + rotldi r9,r9,16 + mtmsrd r9,1 /* Update machine state */ +#endif /* CONFIG_PPC_BOOK3E */ + +#ifdef CONFIG_PREEMPT + clrrdi r9,r1,THREAD_SHIFT /* current_thread_info() */ + li r0,_TIF_NEED_RESCHED /* bits to check */ + ld r3,_MSR(r1) + ld r4,TI_FLAGS(r9) + /* Move MSR_PR bit in r3 to _TIF_SIGPENDING position in r0 */ + rlwimi r0,r3,32+TIF_SIGPENDING-MSR_PR_LG,_TIF_SIGPENDING + and. r0,r4,r0 /* check NEED_RESCHED and maybe SIGPENDING */ + bne do_work + +#else /* !CONFIG_PREEMPT */ + ld r3,_MSR(r1) /* Returning to user mode? */ + andi. r3,r3,MSR_PR + beq restore /* if not, just restore regs and return */ + + /* Check current_thread_info()->flags */ + clrrdi r9,r1,THREAD_SHIFT + ld r4,TI_FLAGS(r9) + andi. r0,r4,_TIF_USER_WORK_MASK + bne do_work +#endif + +restore: +BEGIN_FW_FTR_SECTION + ld r5,SOFTE(r1) +FW_FTR_SECTION_ELSE + b .Liseries_check_pending_irqs +ALT_FW_FTR_SECTION_END_IFCLR(FW_FEATURE_ISERIES) +2: + TRACE_AND_RESTORE_IRQ(r5); + + /* extract EE bit and use it to restore paca->hard_enabled */ + ld r3,_MSR(r1) + rldicl r4,r3,49,63 /* r0 = (r3 >> 15) & 1 */ + stb r4,PACAHARDIRQEN(r13) + +#ifdef CONFIG_PPC_BOOK3E + b .exception_return_book3e +#else + ld r4,_CTR(r1) + ld r0,_LINK(r1) + mtctr r4 + mtlr r0 + ld r4,_XER(r1) + mtspr SPRN_XER,r4 + + REST_8GPRS(5, r1) + + andi. r0,r3,MSR_RI + beq- unrecov_restore + + /* + * Clear the reservation. If we know the CPU tracks the address of + * the reservation then we can potentially save some cycles and use + * a larx. On POWER6 and POWER7 this is significantly faster. + */ +BEGIN_FTR_SECTION + stdcx. r0,0,r1 /* to clear the reservation */ +FTR_SECTION_ELSE + ldarx r4,0,r1 +ALT_FTR_SECTION_END_IFCLR(CPU_FTR_STCX_CHECKS_ADDRESS) + + /* + * Clear RI before restoring r13. If we are returning to + * userspace and we take an exception after restoring r13, + * we end up corrupting the userspace r13 value. + */ + mfmsr r4 + andc r4,r4,r0 /* r0 contains MSR_RI here */ + mtmsrd r4,1 + + /* + * r13 is our per cpu area, only restore it if we are returning to + * userspace + */ + andi. r0,r3,MSR_PR + beq 1f + ACCOUNT_CPU_USER_EXIT(r2, r4) + REST_GPR(13, r1) +1: + mtspr SPRN_SRR1,r3 + + ld r2,_CCR(r1) + mtcrf 0xFF,r2 + ld r2,_NIP(r1) + mtspr SPRN_SRR0,r2 + + ld r0,GPR0(r1) + ld r2,GPR2(r1) + ld r3,GPR3(r1) + ld r4,GPR4(r1) + ld r1,GPR1(r1) + + rfid + b . /* prevent speculative execution */ + +#endif /* CONFIG_PPC_BOOK3E */ + +.Liseries_check_pending_irqs: +#ifdef CONFIG_PPC_ISERIES + ld r5,SOFTE(r1) + cmpdi 0,r5,0 + beq 2b + /* Check for pending interrupts (iSeries) */ + ld r3,PACALPPACAPTR(r13) + ld r3,LPPACAANYINT(r3) + cmpdi r3,0 + beq+ 2b /* skip do_IRQ if no interrupts */ + + li r3,0 + stb r3,PACASOFTIRQEN(r13) /* ensure we are soft-disabled */ +#ifdef CONFIG_TRACE_IRQFLAGS + bl .trace_hardirqs_off + mfmsr r10 +#endif + ori r10,r10,MSR_EE + mtmsrd r10 /* hard-enable again */ + addi r3,r1,STACK_FRAME_OVERHEAD + bl .do_IRQ + b .ret_from_except_lite /* loop back and handle more */ +#endif + +do_work: +#ifdef CONFIG_PREEMPT + andi. r0,r3,MSR_PR /* Returning to user mode? */ + bne user_work + /* Check that preempt_count() == 0 and interrupts are enabled */ + lwz r8,TI_PREEMPT(r9) + cmpwi cr1,r8,0 + ld r0,SOFTE(r1) + cmpdi r0,0 + crandc eq,cr1*4+eq,eq + bne restore + + /* Here we are preempting the current task. + * + * Ensure interrupts are soft-disabled. We also properly mark + * the PACA to reflect the fact that they are hard-disabled + * and trace the change + */ + li r0,0 + stb r0,PACASOFTIRQEN(r13) + stb r0,PACAHARDIRQEN(r13) + TRACE_DISABLE_INTS + + /* Call the scheduler with soft IRQs off */ +1: bl .preempt_schedule_irq + + /* Hard-disable interrupts again (and update PACA) */ +#ifdef CONFIG_PPC_BOOK3E + wrteei 0 +#else + mfmsr r10 + rldicl r10,r10,48,1 + rotldi r10,r10,16 + mtmsrd r10,1 +#endif /* CONFIG_PPC_BOOK3E */ + li r0,0 + stb r0,PACAHARDIRQEN(r13) + + /* Re-test flags and eventually loop */ + clrrdi r9,r1,THREAD_SHIFT + ld r4,TI_FLAGS(r9) + andi. r0,r4,_TIF_NEED_RESCHED + bne 1b + b restore + +user_work: +#endif /* CONFIG_PREEMPT */ + + /* Enable interrupts */ +#ifdef CONFIG_PPC_BOOK3E + wrteei 1 +#else + ori r10,r10,MSR_EE + mtmsrd r10,1 +#endif /* CONFIG_PPC_BOOK3E */ + + andi. r0,r4,_TIF_NEED_RESCHED + beq 1f + bl .schedule + b .ret_from_except_lite + +1: bl .save_nvgprs + addi r3,r1,STACK_FRAME_OVERHEAD + bl .do_signal + b .ret_from_except + +unrecov_restore: + addi r3,r1,STACK_FRAME_OVERHEAD + bl .unrecoverable_exception + b unrecov_restore + +#ifdef CONFIG_PPC_RTAS +/* + * On CHRP, the Run-Time Abstraction Services (RTAS) have to be + * called with the MMU off. + * + * In addition, we need to be in 32b mode, at least for now. + * + * Note: r3 is an input parameter to rtas, so don't trash it... + */ +_GLOBAL(enter_rtas) + mflr r0 + std r0,16(r1) + stdu r1,-RTAS_FRAME_SIZE(r1) /* Save SP and create stack space. */ + + /* Because RTAS is running in 32b mode, it clobbers the high order half + * of all registers that it saves. We therefore save those registers + * RTAS might touch to the stack. (r0, r3-r13 are caller saved) + */ + SAVE_GPR(2, r1) /* Save the TOC */ + SAVE_GPR(13, r1) /* Save paca */ + SAVE_8GPRS(14, r1) /* Save the non-volatiles */ + SAVE_10GPRS(22, r1) /* ditto */ + + mfcr r4 + std r4,_CCR(r1) + mfctr r5 + std r5,_CTR(r1) + mfspr r6,SPRN_XER + std r6,_XER(r1) + mfdar r7 + std r7,_DAR(r1) + mfdsisr r8 + std r8,_DSISR(r1) + + /* Temporary workaround to clear CR until RTAS can be modified to + * ignore all bits. + */ + li r0,0 + mtcr r0 + +#ifdef CONFIG_BUG + /* There is no way it is acceptable to get here with interrupts enabled, + * check it with the asm equivalent of WARN_ON + */ + lbz r0,PACASOFTIRQEN(r13) +1: tdnei r0,0 + EMIT_BUG_ENTRY 1b,__FILE__,__LINE__,BUGFLAG_WARNING +#endif + + /* Hard-disable interrupts */ + mfmsr r6 + rldicl r7,r6,48,1 + rotldi r7,r7,16 + mtmsrd r7,1 + + /* Unfortunately, the stack pointer and the MSR are also clobbered, + * so they are saved in the PACA which allows us to restore + * our original state after RTAS returns. + */ + std r1,PACAR1(r13) + std r6,PACASAVEDMSR(r13) + + /* Setup our real return addr */ + LOAD_REG_ADDR(r4,.rtas_return_loc) + clrldi r4,r4,2 /* convert to realmode address */ + mtlr r4 + + li r0,0 + ori r0,r0,MSR_EE|MSR_SE|MSR_BE|MSR_RI + andc r0,r6,r0 + + li r9,1 + rldicr r9,r9,MSR_SF_LG,(63-MSR_SF_LG) + ori r9,r9,MSR_IR|MSR_DR|MSR_FE0|MSR_FE1|MSR_FP|MSR_RI + andc r6,r0,r9 + sync /* disable interrupts so SRR0/1 */ + mtmsrd r0 /* don't get trashed */ + + LOAD_REG_ADDR(r4, rtas) + ld r5,RTASENTRY(r4) /* get the rtas->entry value */ + ld r4,RTASBASE(r4) /* get the rtas->base value */ + + mtspr SPRN_SRR0,r5 + mtspr SPRN_SRR1,r6 + rfid + b . /* prevent speculative execution */ + +_STATIC(rtas_return_loc) + /* relocation is off at this point */ + GET_PACA(r4) + clrldi r4,r4,2 /* convert to realmode address */ + + bcl 20,31,$+4 +0: mflr r3 + ld r3,(1f-0b)(r3) /* get &.rtas_restore_regs */ + + mfmsr r6 + li r0,MSR_RI + andc r6,r6,r0 + sync + mtmsrd r6 + + ld r1,PACAR1(r4) /* Restore our SP */ + ld r4,PACASAVEDMSR(r4) /* Restore our MSR */ + + mtspr SPRN_SRR0,r3 + mtspr SPRN_SRR1,r4 + rfid + b . /* prevent speculative execution */ + + .align 3 +1: .llong .rtas_restore_regs + +_STATIC(rtas_restore_regs) + /* relocation is on at this point */ + REST_GPR(2, r1) /* Restore the TOC */ + REST_GPR(13, r1) /* Restore paca */ + REST_8GPRS(14, r1) /* Restore the non-volatiles */ + REST_10GPRS(22, r1) /* ditto */ + + GET_PACA(r13) + + ld r4,_CCR(r1) + mtcr r4 + ld r5,_CTR(r1) + mtctr r5 + ld r6,_XER(r1) + mtspr SPRN_XER,r6 + ld r7,_DAR(r1) + mtdar r7 + ld r8,_DSISR(r1) + mtdsisr r8 + + addi r1,r1,RTAS_FRAME_SIZE /* Unstack our frame */ + ld r0,16(r1) /* get return address */ + + mtlr r0 + blr /* return to caller */ + +#endif /* CONFIG_PPC_RTAS */ + +_GLOBAL(enter_prom) + mflr r0 + std r0,16(r1) + stdu r1,-PROM_FRAME_SIZE(r1) /* Save SP and create stack space */ + + /* Because PROM is running in 32b mode, it clobbers the high order half + * of all registers that it saves. We therefore save those registers + * PROM might touch to the stack. (r0, r3-r13 are caller saved) + */ + SAVE_GPR(2, r1) + SAVE_GPR(13, r1) + SAVE_8GPRS(14, r1) + SAVE_10GPRS(22, r1) + mfcr r10 + mfmsr r11 + std r10,_CCR(r1) + std r11,_MSR(r1) + + /* Get the PROM entrypoint */ + mtlr r4 + + /* Switch MSR to 32 bits mode + */ +#ifdef CONFIG_PPC_BOOK3E + rlwinm r11,r11,0,1,31 + mtmsr r11 +#else /* CONFIG_PPC_BOOK3E */ + mfmsr r11 + li r12,1 + rldicr r12,r12,MSR_SF_LG,(63-MSR_SF_LG) + andc r11,r11,r12 + li r12,1 + rldicr r12,r12,MSR_ISF_LG,(63-MSR_ISF_LG) + andc r11,r11,r12 + mtmsrd r11 +#endif /* CONFIG_PPC_BOOK3E */ + isync + + /* Enter PROM here... */ + blrl + + /* Just make sure that r1 top 32 bits didn't get + * corrupt by OF + */ + rldicl r1,r1,0,32 + + /* Restore the MSR (back to 64 bits) */ + ld r0,_MSR(r1) + MTMSRD(r0) + isync + + /* Restore other registers */ + REST_GPR(2, r1) + REST_GPR(13, r1) + REST_8GPRS(14, r1) + REST_10GPRS(22, r1) + ld r4,_CCR(r1) + mtcr r4 + + addi r1,r1,PROM_FRAME_SIZE + ld r0,16(r1) + mtlr r0 + blr + +#ifdef CONFIG_FUNCTION_TRACER +#ifdef CONFIG_DYNAMIC_FTRACE +_GLOBAL(mcount) +_GLOBAL(_mcount) + blr + +_GLOBAL(ftrace_caller) + /* Taken from output of objdump from lib64/glibc */ + mflr r3 + ld r11, 0(r1) + stdu r1, -112(r1) + std r3, 128(r1) + ld r4, 16(r11) + subi r3, r3, MCOUNT_INSN_SIZE +.globl ftrace_call +ftrace_call: + bl ftrace_stub + nop +#ifdef CONFIG_FUNCTION_GRAPH_TRACER +.globl ftrace_graph_call +ftrace_graph_call: + b ftrace_graph_stub +_GLOBAL(ftrace_graph_stub) +#endif + ld r0, 128(r1) + mtlr r0 + addi r1, r1, 112 +_GLOBAL(ftrace_stub) + blr +#else +_GLOBAL(mcount) + blr + +_GLOBAL(_mcount) + /* Taken from output of objdump from lib64/glibc */ + mflr r3 + ld r11, 0(r1) + stdu r1, -112(r1) + std r3, 128(r1) + ld r4, 16(r11) + + subi r3, r3, MCOUNT_INSN_SIZE + LOAD_REG_ADDR(r5,ftrace_trace_function) + ld r5,0(r5) + ld r5,0(r5) + mtctr r5 + bctrl + nop + + +#ifdef CONFIG_FUNCTION_GRAPH_TRACER + b ftrace_graph_caller +#endif + ld r0, 128(r1) + mtlr r0 + addi r1, r1, 112 +_GLOBAL(ftrace_stub) + blr + +#endif /* CONFIG_DYNAMIC_FTRACE */ + +#ifdef CONFIG_FUNCTION_GRAPH_TRACER +_GLOBAL(ftrace_graph_caller) + /* load r4 with local address */ + ld r4, 128(r1) + subi r4, r4, MCOUNT_INSN_SIZE + + /* get the parent address */ + ld r11, 112(r1) + addi r3, r11, 16 + + bl .prepare_ftrace_return + nop + + ld r0, 128(r1) + mtlr r0 + addi r1, r1, 112 + blr + +_GLOBAL(return_to_handler) + /* need to save return values */ + std r4, -24(r1) + std r3, -16(r1) + std r31, -8(r1) + mr r31, r1 + stdu r1, -112(r1) + + bl .ftrace_return_to_handler + nop + + /* return value has real return address */ + mtlr r3 + + ld r1, 0(r1) + ld r4, -24(r1) + ld r3, -16(r1) + ld r31, -8(r1) + + /* Jump back to real return address */ + blr + +_GLOBAL(mod_return_to_handler) + /* need to save return values */ + std r4, -32(r1) + std r3, -24(r1) + /* save TOC */ + std r2, -16(r1) + std r31, -8(r1) + mr r31, r1 + stdu r1, -112(r1) + + /* + * We are in a module using the module's TOC. + * Switch to our TOC to run inside the core kernel. + */ + ld r2, PACATOC(r13) + + bl .ftrace_return_to_handler + nop + + /* return value has real return address */ + mtlr r3 + + ld r1, 0(r1) + ld r4, -32(r1) + ld r3, -24(r1) + ld r2, -16(r1) + ld r31, -8(r1) + + /* Jump back to real return address */ + blr +#endif /* CONFIG_FUNCTION_GRAPH_TRACER */ +#endif /* CONFIG_FUNCTION_TRACER */ -- cgit v1.2.3