From 849369d6c66d3054688672f97d31fceb8e8230fb Mon Sep 17 00:00:00 2001 From: root Date: Fri, 25 Dec 2015 04:40:36 +0000 Subject: initial_commit --- drivers/misc/Kconfig | 556 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 556 insertions(+) create mode 100644 drivers/misc/Kconfig (limited to 'drivers/misc/Kconfig') diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig new file mode 100644 index 00000000..c35ccb9c --- /dev/null +++ b/drivers/misc/Kconfig @@ -0,0 +1,556 @@ +# +# Misc strange devices +# + +# This one has to live outside of the MISC_DEVICES conditional, +# because it may be selected by drivers/platform/x86/hp_accel. +config SENSORS_LIS3LV02D + tristate + depends on INPUT + select INPUT_POLLDEV + default n + +menuconfig MISC_DEVICES + bool "Misc devices" + ---help--- + Say Y here to get to see options for device drivers from various + different categories. This option alone does not add any kernel code. + + If you say N, all options in this submenu will be skipped and disabled. + +if MISC_DEVICES + +config AD525X_DPOT + tristate "Analog Devices Digital Potentiometers" + depends on (I2C || SPI) && SYSFS + help + If you say yes here, you get support for the Analog Devices + AD5258, AD5259, AD5251, AD5252, AD5253, AD5254, AD5255 + AD5160, AD5161, AD5162, AD5165, AD5200, AD5201, AD5203, + AD5204, AD5206, AD5207, AD5231, AD5232, AD5233, AD5235, + AD5260, AD5262, AD5263, AD5290, AD5291, AD5292, AD5293, + AD7376, AD8400, AD8402, AD8403, ADN2850, AD5241, AD5242, + AD5243, AD5245, AD5246, AD5247, AD5248, AD5280, AD5282, + ADN2860, AD5273, AD5171, AD5170, AD5172, AD5173, AD5270, + AD5271, AD5272, AD5274 + digital potentiometer chips. + + See Documentation/misc-devices/ad525x_dpot.txt for the + userspace interface. + + This driver can also be built as a module. If so, the module + will be called ad525x_dpot. + +config AD525X_DPOT_I2C + tristate "support I2C bus connection" + depends on AD525X_DPOT && I2C + help + Say Y here if you have a digital potentiometers hooked to an I2C bus. + + To compile this driver as a module, choose M here: the + module will be called ad525x_dpot-i2c. + +config AD525X_DPOT_SPI + tristate "support SPI bus connection" + depends on AD525X_DPOT && SPI_MASTER + help + Say Y here if you have a digital potentiometers hooked to an SPI bus. + + If unsure, say N (but it's safe to say "Y"). + + To compile this driver as a module, choose M here: the + module will be called ad525x_dpot-spi. + +config ATMEL_PWM + tristate "Atmel AT32/AT91 PWM support" + depends on AVR32 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 + help + This option enables device driver support for the PWM channels + on certain Atmel processors. Pulse Width Modulation is used for + purposes including software controlled power-efficient backlights + on LCD displays, motor control, and waveform generation. + +config AB8500_PWM + bool "AB8500 PWM support" + depends on AB8500_CORE && ARCH_U8500 + select HAVE_PWM + help + This driver exports functions to enable/disble/config/free Pulse + Width Modulation in the Analog Baseband Chip AB8500. + It is used by led and backlight driver to control the intensity. + +config ATMEL_TCLIB + bool "Atmel AT32/AT91 Timer/Counter Library" + depends on (AVR32 || ARCH_AT91) + help + Select this if you want a library to allocate the Timer/Counter + blocks found on many Atmel processors. This facilitates using + these blocks by different drivers despite processor differences. + +config ATMEL_TCB_CLKSRC + bool "TC Block Clocksource" + depends on ATMEL_TCLIB + default y + help + Select this to get a high precision clocksource based on a + TC block with a 5+ MHz base clock rate. Two timer channels + are combined to make a single 32-bit timer. + + When GENERIC_CLOCKEVENTS is defined, the third timer channel + may be used as a clock event device supporting oneshot mode + (delays of up to two seconds) based on the 32 KiHz clock. + +config ATMEL_TCB_CLKSRC_BLOCK + int + depends on ATMEL_TCB_CLKSRC + prompt "TC Block" if ARCH_AT91RM9200 || ARCH_AT91SAM9260 || CPU_AT32AP700X + default 0 + range 0 1 + help + Some chips provide more than one TC block, so you have the + choice of which one to use for the clock framework. The other + TC can be used for other purposes, such as PWM generation and + interval timing. + +config IBM_ASM + tristate "Device driver for IBM RSA service processor" + depends on X86 && PCI && INPUT && EXPERIMENTAL + ---help--- + This option enables device driver support for in-band access to the + IBM RSA (Condor) service processor in eServer xSeries systems. + The ibmasm device driver allows user space application to access + ASM (Advanced Systems Management) functions on the service + processor. The driver is meant to be used in conjunction with + a user space API. + The ibmasm driver also enables the OS to use the UART on the + service processor board as a regular serial port. To make use of + this feature serial driver support (CONFIG_SERIAL_8250) must be + enabled. + + WARNING: This software may not be supported or function + correctly on your IBM server. Please consult the IBM ServerProven + website + for information on the specific driver level and support statement + for your IBM server. + +config PHANTOM + tristate "Sensable PHANToM (PCI)" + depends on PCI + help + Say Y here if you want to build a driver for Sensable PHANToM device. + + This driver is only for PCI PHANToMs. + + If you choose to build module, its name will be phantom. If unsure, + say N here. + +config INTEL_MID_PTI + tristate "Parallel Trace Interface for MIPI P1149.7 cJTAG standard" + default n + help + The PTI (Parallel Trace Interface) driver directs + trace data routed from various parts in the system out + through an Intel Penwell PTI port and out of the mobile + device for analysis with a debugging tool (Lauterbach or Fido). + + You should select this driver if the target kernel is meant for + an Intel Atom (non-netbook) mobile device containing a MIPI + P1149.7 standard implementation. + +config SGI_IOC4 + tristate "SGI IOC4 Base IO support" + depends on PCI + ---help--- + This option enables basic support for the IOC4 chip on certain + SGI IO controller cards (IO9, IO10, and PCI-RT). This option + does not enable any specific functions on such a card, but provides + necessary infrastructure for other drivers to utilize. + + If you have an SGI Altix with an IOC4-based card say Y. + Otherwise say N. + +config TIFM_CORE + tristate "TI Flash Media interface support (EXPERIMENTAL)" + depends on EXPERIMENTAL && PCI + help + If you want support for Texas Instruments(R) Flash Media adapters + you should select this option and then also choose an appropriate + host adapter, such as 'TI Flash Media PCI74xx/PCI76xx host adapter + support', if you have a TI PCI74xx compatible card reader, for + example. + You will also have to select some flash card format drivers. MMC/SD + cards are supported via 'MMC/SD Card support: TI Flash Media MMC/SD + Interface support (MMC_TIFM_SD)'. + + To compile this driver as a module, choose M here: the module will + be called tifm_core. + +config TIFM_7XX1 + tristate "TI Flash Media PCI74xx/PCI76xx host adapter support (EXPERIMENTAL)" + depends on PCI && TIFM_CORE && EXPERIMENTAL + default TIFM_CORE + help + This option enables support for Texas Instruments(R) PCI74xx and + PCI76xx families of Flash Media adapters, found in many laptops. + To make actual use of the device, you will have to select some + flash card format drivers, as outlined in the TIFM_CORE Help. + + To compile this driver as a module, choose M here: the module will + be called tifm_7xx1. + +config ICS932S401 + tristate "Integrated Circuits ICS932S401" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for the Integrated Circuits + ICS932S401 clock control chips. + + This driver can also be built as a module. If so, the module + will be called ics932s401. + +config ATMEL_SSC + tristate "Device driver for Atmel SSC peripheral" + depends on AVR32 || ARCH_AT91 + ---help--- + This option enables device driver support for Atmel Synchronized + Serial Communication peripheral (SSC). + + The SSC peripheral supports a wide variety of serial frame based + communications, i.e. I2S, SPI, etc. + + If unsure, say N. + +config ENCLOSURE_SERVICES + tristate "Enclosure Services" + default n + help + Provides support for intelligent enclosures (bays which + contain storage devices). You also need either a host + driver (SCSI/ATA) which supports enclosures + or a SCSI enclosure device (SES) to use these services. + +config SGI_XP + tristate "Support communication between SGI SSIs" + depends on NET + depends on (IA64_GENERIC || IA64_SGI_SN2 || IA64_SGI_UV || X86_UV) && SMP + select IA64_UNCACHED_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2 + select GENERIC_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2 + select SGI_GRU if X86_64 && SMP + ---help--- + An SGI machine can be divided into multiple Single System + Images which act independently of each other and have + hardware based memory protection from the others. Enabling + this feature will allow for direct communication between SSIs + based on a network adapter and DMA messaging. + +config CS5535_MFGPT + tristate "CS5535/CS5536 Geode Multi-Function General Purpose Timer (MFGPT) support" + depends on PCI && X86 && MFD_CS5535 + default n + help + This driver provides access to MFGPT functionality for other + drivers that need timers. MFGPTs are available in the CS5535 and + CS5536 companion chips that are found in AMD Geode and several + other platforms. They have a better resolution and max interval + than the generic PIT, and are suitable for use as high-res timers. + You probably don't want to enable this manually; other drivers that + make use of it should enable it. + +config CS5535_MFGPT_DEFAULT_IRQ + int + depends on CS5535_MFGPT + default 7 + help + MFGPTs on the CS5535 require an interrupt. The selected IRQ + can be overridden as a module option as well as by driver that + use the cs5535_mfgpt_ API; however, different architectures might + want to use a different IRQ by default. This is here for + architectures to set as necessary. + +config CS5535_CLOCK_EVENT_SRC + tristate "CS5535/CS5536 high-res timer (MFGPT) events" + depends on GENERIC_CLOCKEVENTS && CS5535_MFGPT + help + This driver provides a clock event source based on the MFGPT + timer(s) in the CS5535 and CS5536 companion chips. + MFGPTs have a better resolution and max interval than the + generic PIT, and are suitable for use as high-res timers. + +config HP_ILO + tristate "Channel interface driver for the HP iLO processor" + depends on PCI + default n + help + The channel interface driver allows applications to communicate + with iLO management processors present on HP ProLiant servers. + Upon loading, the driver creates /dev/hpilo/dXccbN files, which + can be used to gather data from the management processor, via + read and write system calls. + + To compile this driver as a module, choose M here: the + module will be called hpilo. + +config SGI_GRU + tristate "SGI GRU driver" + depends on X86_UV && SMP + default n + select MMU_NOTIFIER + ---help--- + The GRU is a hardware resource located in the system chipset. The GRU + contains memory that can be mmapped into the user address space. This memory is + used to communicate with the GRU to perform functions such as load/store, + scatter/gather, bcopy, AMOs, etc. The GRU is directly accessed by user + instructions using user virtual addresses. GRU instructions (ex., bcopy) use + user virtual addresses for operands. + + If you are not running on a SGI UV system, say N. + +config SGI_GRU_DEBUG + bool "SGI GRU driver debug" + depends on SGI_GRU + default n + ---help--- + This option enables addition debugging code for the SGI GRU driver. If + you are unsure, say N. + +config APDS9802ALS + tristate "Medfield Avago APDS9802 ALS Sensor module" + depends on I2C + help + If you say yes here you get support for the ALS APDS9802 ambient + light sensor. + + This driver can also be built as a module. If so, the module + will be called apds9802als. + +config ISL29003 + tristate "Intersil ISL29003 ambient light sensor" + depends on I2C && SYSFS + help + If you say yes here you get support for the Intersil ISL29003 + ambient light sensor. + + This driver can also be built as a module. If so, the module + will be called isl29003. + +config ISL29020 + tristate "Intersil ISL29020 ambient light sensor" + depends on I2C + help + If you say yes here you get support for the Intersil ISL29020 + ambient light sensor. + + This driver can also be built as a module. If so, the module + will be called isl29020. + +config SENSORS_TSL2550 + tristate "Taos TSL2550 ambient light sensor" + depends on I2C && SYSFS + help + If you say yes here you get support for the Taos TSL2550 + ambient light sensor. + + This driver can also be built as a module. If so, the module + will be called tsl2550. + +config SENSORS_BH1780 + tristate "ROHM BH1780GLI ambient light sensor" + depends on I2C && SYSFS + help + If you say yes here you get support for the ROHM BH1780GLI + ambient light sensor. + + This driver can also be built as a module. If so, the module + will be called bh1780gli. + +config SENSORS_BH1770 + tristate "BH1770GLC / SFH7770 combined ALS - Proximity sensor" + depends on I2C + ---help--- + Say Y here if you want to build a driver for BH1770GLC (ROHM) or + SFH7770 (Osram) combined ambient light and proximity sensor chip. + + To compile this driver as a module, choose M here: the + module will be called bh1770glc. If unsure, say N here. + +config SENSORS_APDS990X + tristate "APDS990X combined als and proximity sensors" + depends on I2C + default n + ---help--- + Say Y here if you want to build a driver for Avago APDS990x + combined ambient light and proximity sensor chip. + + To compile this driver as a module, choose M here: the + module will be called apds990x. If unsure, say N here. + +config SUSPEND_COUNTER + tristate "Suspend counter print suspend count meesage" + depends on SUSPEND + default n + help + Say Y here if you want to enable suspend counter + It will print suspend and counter message in console + +config HMC6352 + tristate "Honeywell HMC6352 compass" + depends on I2C + help + This driver provides support for the Honeywell HMC6352 compass, + providing configuration and heading data via sysfs. + +config SENSORS_AK8975 + tristate "AK8975 compass support" + default n + depends on I2C + help + If you say yes here you get support for Asahi Kasei's + orientation sensor AK8975. + +config EP93XX_PWM + tristate "EP93xx PWM support" + depends on ARCH_EP93XX + help + This option enables device driver support for the PWM channels + on the Cirrus EP93xx processors. The EP9307 chip only has one + PWM channel all the others have two, the second channel is an + alternate function of the EGPIO14 pin. A sysfs interface is + provided to control the PWM channels. + + To compile this driver as a module, choose M here: the module will + be called ep93xx_pwm. + +config DS1682 + tristate "Dallas DS1682 Total Elapsed Time Recorder with Alarm" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for Dallas Semiconductor + DS1682 Total Elapsed Time Recorder. + + This driver can also be built as a module. If so, the module + will be called ds1682. + +config SPEAR13XX_PCIE_GADGET + bool "PCIe gadget support for SPEAr13XX platform" + depends on ARCH_SPEAR13XX + default n + help + This option enables gadget support for PCIe controller. If + board file defines any controller as PCIe endpoint then a sysfs + entry will be created for that controller. User can use these + sysfs node to configure PCIe EP as per his requirements. + +config TI_DAC7512 + tristate "Texas Instruments DAC7512" + depends on SPI && SYSFS + help + If you say yes here you get support for the Texas Instruments + DAC7512 16-bit digital-to-analog converter. + + This driver can also be built as a module. If so, the module + will be called ti_dac7512. + +config UID_STAT + bool "UID based statistics tracking exported to /proc/uid_stat" + default n + +config VMWARE_BALLOON + tristate "VMware Balloon Driver" + depends on X86 + help + This is VMware physical memory management driver which acts + like a "balloon" that can be inflated to reclaim physical pages + by reserving them in the guest and invalidating them in the + monitor, freeing up the underlying machine pages so they can + be allocated to other guests. The balloon can also be deflated + to allow the guest to use more physical memory. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called vmw_balloon. + +config ARM_CHARLCD + bool "ARM Ltd. Character LCD Driver" + depends on PLAT_VERSATILE + help + This is a driver for the character LCD found on the ARM Ltd. + Versatile and RealView Platform Baseboards. It doesn't do + very much more than display the text "ARM Linux" on the first + line and the Linux version on the second line, but that's + still useful. + +config BMP085 + tristate "BMP085 digital pressure sensor" + depends on I2C && SYSFS + help + If you say yes here you get support for the Bosch Sensortec + BMP085 digital pressure sensor. + + To compile this driver as a module, choose M here: the + module will be called bmp085. + +config PCH_PHUB + tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) PHUB" + depends on PCI + help + This driver is for PCH(Platform controller Hub) PHUB(Packet Hub) of + Intel Topcliff which is an IOH(Input/Output Hub) for x86 embedded + processor. The Topcliff has MAC address and Option ROM data in SROM. + This driver can access MAC address and Option ROM data in SROM. + + This driver also can be used for LAPIS Semiconductor's IOH, + ML7213/ML7223/ML7831. + ML7213 which is for IVI(In-Vehicle Infotainment) use. + ML7223 IOH is for MP(Media Phone) use. + ML7831 IOH is for general purpose use. + ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series. + ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH. + + To compile this driver as a module, choose M here: the module will + be called pch_phub. + +config MXS_PERFMON + tristate "i.MX Performance Monitor" + depends on ARCH_MX50 || ARCH_MX6 + default y + +config WL127X_RFKILL + tristate "Bluetooth power control driver for TI wl127x" + depends on RFKILL + default n + ---help--- + Creates an rfkill entry in sysfs for power control of Bluetooth + TI wl127x chips. + +config APANIC + bool "Android kernel panic diagnostics driver" + default n + ---help--- + Driver which handles kernel panics and attempts to write + critical debugging data to flash. + +config APANIC_PLABEL + string "Android panic dump flash partition label" + depends on APANIC + default "kpanic" + ---help--- + If your platform uses a different flash partition label for storing + crashdumps, enter it here. + +config NTX_MISC + bool "Netronix Micro Processor" + depends on MACH_MX6SL_NTX + default y + ---help--- + Netronix micro processor driver. + +source "drivers/misc/c2port/Kconfig" +source "drivers/misc/eeprom/Kconfig" +source "drivers/misc/cb710/Kconfig" +source "drivers/misc/iwmc3200top/Kconfig" +source "drivers/misc/ti-st/Kconfig" +source "drivers/misc/lis3lv02d/Kconfig" +source "drivers/misc/carma/Kconfig" + +endif # MISC_DEVICES -- cgit v1.2.3