AC_REVISION($Revision$)dnl revision of this configure.in script AC_INIT(Makefile.am) AC_CONFIG_AUX_DIR(conf) AC_AIX AC_CANONICAL_SYSTEM AM_CONFIG_HEADER(include/config.h) AM_INIT_AUTOMAKE(plptools, 0.11) AM_PROG_LIBTOOL PLP_SET_LIBVERSION dnl Enable Maintainer stuff AM_MAINTAINER_MODE dnl checks for programs AC_PROG_MAKE_SET PLP_CHECK_COMPILERS AC_PROG_AWK AC_PATH_PROG(SED,sed) dnl NLS support ALL_LINGUAS="de sv" AM_GNU_GETTEXT dnl Additional glibc-intl checks PLP_CHECK_INTL dnl This is stupid for two resaons: dnl dnl 1. It doesn't save and restore CFLAGS if it's _not_ Sun's cc dnl (these have been set already in AC_CHECK_COMPILERS dnl 2. It assumes cc installed at a fixed path which may not be true dnl pkgadd -r can install anywhere. dnl dnl A correct version should check by using cc's _behavior_, not path dnl and save and restore CFLAGS, if it's not Sun's cc. dnl dnl -> Commented out for now because i have gcc on Solaris, no Sun cc. dnl If somebody complains, (s)he should send me some cc output and i dnl can add a correct check to AC_CHECK_COMPILERS (where it belongs). dnl Apart from that, Sun's compiler is crap anyway: It doesn't compile dnl valid c++ code correctly. dnl dnl -Fritz dnl dnl test "$GCC" = yes && CFLAGS="-O2 -Wall" dnl AC_PATH_PROG(CC_PATH, $CC) dnl test "$CC_PATH" = /opt/SUNWspro/bin/cc && CFLAGS="-xO2 -v" dnl checking for aix AC_MSG_CHECKING(for AIX) if test "`uname -s 2>/dev/null`" = AIX ; then AC_MSG_RESULT(yes) AC_CHECK_LIB(bsd, hostname) EXTRA_OBJS=mount_aix.o else AC_MSG_RESULT(no) fi AC_SUBST(EXTRA_OBJS) dnl checks for libraries dnl readline and history for plpftp ac_enable_readline=yes AM_CONDITIONAL(HAVE_LIBREADLINE, false) AM_CONDITIONAL(ADD_LIBCURSES, false) AC_ARG_ENABLE(readline, [ --disable-readline disable libreadline support [no]], if test "$enableval" = "no" ; then AC_MSG_RESULT([support for libreadline disabled]) ac_enable_readline=no fi ) if test "x$ac_enable_readline" = "xyes" ; then PLP_CHECK_READLINE fi ac_enable_history=yes ac_cv_libhistory= AC_ARG_ENABLE(history, [ --disable-history disable libhistory support [no]], if test "$enableval" = "no" ; then AC_MSG_RESULT([support for libhistory disabled]) ac_enable_history=no fi ) if test "x$ac_enable_history" = "xyes" ; then AC_CHECK_LIB(history, add_history, [ AC_DEFINE_UNQUOTED(HAVE_LIBHISTORY,1, [Define this, if you have libhistory]) ac_cv_libhistory=-lhistory ]) fi LIBHISTORY=${ac_cv_libhistory} AC_SUBST(LIBHISTORY) ac_enable_newt=yes ac_cv_libnewt= AC_ARG_ENABLE(newt, [ --disable-newt disable libnewt support [no]], if test "$enableval" = "no" ; then AC_MSG_RESULT([support for libnewt disabled]) ac_enable_newt=no fi ) if test "x$ac_enable_newt" = "xyes" ; then AC_CHECK_LIB(newt, newtInit, [ AC_DEFINE_UNQUOTED(HAVE_LIBNEWT,1, [Define this, if you have libnewt]) ac_cv_libnewt=-lnewt ]) fi LIBNEWT=${ac_cv_libnewt} AC_SUBST(LIBNEWT) dnl these three are for solaris AC_CHECK_LIB(socket, socket) AC_CHECK_LIB(nsl, gethostbyname) ac_save_LDFLAGS=$LDFLAGS; LDFLAGS="-L/usr/ucblib -R/usr/ucblib $LDFLAGS" AC_CHECK_LIB(rpcsoc, svcudp_create,,LDFLAGS=$ac_save_LDFLAGS) dnl checks for mount table - if desired ac_enable_mnttab=yes AC_ARG_ENABLE(mnttab, [ --disable-mnttab disable mnttab writing [no]], if test "$enableval" = "no" ; then AC_MSG_RESULT([support for mnttab disabled]) ac_enable_mnttab=no fi ) if test "x$ac_enable_mnttab" = "xyes" ; then AC_MSG_CHECKING(for mount table) PLP_FIND_FILE(/etc/mnttab /etc/mtab, MTAB) AC_MSG_RESULT($MTAB) if test "$MTAB" = "NO" ; then AC_DEFINE_UNQUOTED(DONT_UPDATE_MTAB,1, [Define this this if you want to prevent plpnfsd from updating mtab]) else AC_DEFINE_UNQUOTED(MTAB_PATH,"$MTAB", [Define this to your mtab's path]) ac_cv_mtab_tmp="${MTAB}~" case "$target_alias" in *linux*) ;; *) ac_cv_mtab_tmp="${MTAB}.plpnfsd" ;; esac AC_DEFINE_UNQUOTED(MTAB_TMP,"${ac_cv_mtab_tmp}", [Define this to your temporary mtab's path]) fi fi dnl Check, if bot time.h and sys/time.h may be included AC_HEADER_TIME dnl Check, if compiler knows about bool AC_CHECK_BOOL dnl Type of sighandlers AC_TYPE_SIGNAL dnl checks for header files AC_CHECK_HEADERS( sys/time.h sys/ioctl.h sys/errno.h sys/ttold.h stdlib.h \ sys/int_types.h stdint.h ) PLP_HELP_MSG([Debugging (developer only!):]) AC_CHECK_CCMALLOC dnl special options for customization PLP_HELP_MSG([Options for overriding builtin defaults:]) AC_ARG_WITH(serial, [ --with-serial=DEV override default serial line], [ DDEV="$withval" AC_MSG_RESULT(Overriding serial line: $DDEV) ], [ AC_MSG_CHECKING(for default serial line) PLP_FIND_CDEV(/dev/psion /dev/tty0p0 /dev/tty00 /dev/ttyS0 /dev/term/a /dev/ttyfa /dev/ttya /dev/tty0 /dev/ttyf1 /dev/cuaa1, DDEV) AC_MSG_RESULT($DDEV) test "$DDEV" = "NO" && AC_MSG_ERROR(NO serial lines. Use --with-serial.) ] ) AC_DEFINE_UNQUOTED(DDEV,"$DDEV",[Define this to your serial device node]) AC_SUBST(DDEV) AC_ARG_WITH(speed, [ --with-speed=SPEED override default serial speed [auto]], [ if "$withval" = "auto" ; then DSNAME=auto DSPEED=-1 else DSPEED="$withval" DSNAME="$withval" fi AC_MSG_RESULT(Overriding serial speed: $DSNAME) ], [ DSPEED=-1 DSNAME=auto AC_MSG_RESULT(Using default serial speed: auto) ] ) AC_DEFINE_UNQUOTED(DSPEED,$DSPEED,[Define this to your serial device speed]) AC_DEFINE_UNQUOTED(DSNAME,$DSNAME, [Define this to your serial device speed alias]) AC_SUBST(DSPEED) AC_SUBST(DSNAME) AC_ARG_WITH(port, [ --with-port=PORT override default port [7501]], [ DPORT="$withval" AC_MSG_RESULT(Overriding port: $DPORT) ], [ DPORT=7501 AC_MSG_RESULT(Using default port: $DPORT) ] ) AC_DEFINE_UNQUOTED(DPORT,$DPORT, [Define this to the TCP port ncpd should listen on]) AC_SUBST(DPORT) AC_ARG_WITH(drive, [ --with-drive=DRIVE override default Psion drive [AUTO]], [ DDRIVE="$withval" AC_MSG_RESULT(Overriding drive: $DDRIVE) ], [ DDRIVE='AUTO' AC_MSG_RESULT(Using default Psion drive: $DDRIVE) ] ) AC_DEFINE_UNQUOTED(DDRIVE,"$DDRIVE", [Define this to your default drive on your Psion]) AC_ARG_WITH(basedir, [ --with-basedir=DIR override default Psion directory [\\\\]], [ DBASEDIR="$withval" AC_MSG_RESULT(Overriding directory: $DBASEDIR) ], [ DBASEDIR='\\' AC_MSG_RESULT(Using default Psion directory: $DBASEDIR) ] ) AC_DEFINE_UNQUOTED(DBASEDIR,"$DBASEDIR", [Define this to your default directory on your Psion]) AC_ARG_WITH(mountdir, [ --with-mountdir=DIR override default mount point [/mnt/psion]], [ DMOUNTPOINT="$withval" AC_MSG_RESULT(Overriding mount point: $DMOUNTPOINT) ], [ DMOUNTPOINT="/mnt/psion" AC_MSG_RESULT(Using default mount point: $DMOUNTPOINT) ] ) AC_DEFINE_UNQUOTED(DMOUNTPOINT,"$DMOUNTPOINT", [Define this to your default mountpoint for plpnfsd]) AC_SUBST(DMOUNTPOINT) test "x$prefix" = xNONE && prefix="$ac_default_prefix" eval PKGDATA="${datadir}/${PACKAGE}" AC_DEFINE_UNQUOTED(PKGDATA,"$PKGDATA",[This defines the dir for support files]) AC_SUBST(PKGDATA) AC_ARG_WITH(initdir, [ --with-initdir=DIR override default init dir [/etc/rc.d/init.d]], [ initdir="$withval" AC_MSG_RESULT(Overriding initdir: $initdir) ], [ initdir="/etc/rc.d/init.d" AC_MSG_RESULT(Using default init dir: $initdir) ] ) AC_SUBST(initdir) dnl KDE stuff PLP_HELP_MSG([Options for activating sub packages:]) ac_enable_kde=no AM_CONDITIONAL(BUILD_KDE, false) AC_ARG_ENABLE(kde, [ --enable-kde build KDE stuff [no]], if test "$enableval" = "yes" ; then AC_MSG_RESULT([Will build KDE stuff]) ac_enable_kde=yes fi ) PLP_HELP_MSG([Options, only needed when building KDE stuff:]) if test "x$ac_enable_kde" = "xyes" ; then AC_ARG_WITH(kdedir, [ --with-kdedir=DIR specify KDE directory [${prefix:-${ac_default_prefix}}]], [ kde_prefix=${withval} kde_exec_prefix=${withval} ] ) AC_PATH_KDE if test -n "${kde_cv_path_kde_config}" ; then kde_prefix=`${kde_cv_path_kde_config} --prefix` kde_exec_prefix=`${kde_cv_path_kde_config} --prefix` else if test "${prefix}" != "NONE" ; then kde_prefix=${prefix} else kde_prefix=$ac_default_prefix fi if test "${exec_prefix}" != "NONE" ; then kde_exec_prefix=${exec_prefix} else kde_exec_prefix=${kde_prefix} fi fi AC_MSG_RESULT(KDE stuff will be installed below $kde_prefix) AC_SUBST(kde_prefix) AC_SUBST(kde_exec_prefix) AC_CHECK_KDEMAXPATHLEN KDE_CHECK_FINAL AM_KDE_WITH_NLS KDE_PLUGIN="-avoid-version -module -no-undefined \$(KDE_RPATH)" AC_SUBST(KDE_PLUGIN) AM_CONDITIONAL(BUILD_KDE, true) fi AC_OUTPUT( Makefile intl/Makefile po/Makefile.in po/Makefile lib/Makefile ncpd/Makefile plpftp/Makefile plpnfsd/Makefile kde2/Makefile kde2/kioslave/Makefile kde2/plugins/Makefile kde2/kpsion/Makefile kde2/klipsi/Makefile kde2/po/Makefile kde2/po/de/Makefile kde2/mime/Makefile kde2/mime/icons/Makefile kde2/doc/Makefile kde2/doc/en/Makefile kde2/doc/de/Makefile kde2/doc/kioslave/Makefile kde2/doc/kioslave/de/Makefile kde2/doc/kioslave/en/Makefile plpbackup/Makefile plpprint/Makefile plpprint/prolog.ps sisinstall/Makefile doc/Makefile doc/api/Makefile etc/psion etc/psion.SuSE etc/psion.SuSE8 etc/plptools.spec doc/ncpd.man doc/plpnfsd.man doc/plpftp.man doc/sisinstall.man doc/plpprintd.man doc/plpbackup.man debian/kpsion.1.in debian/klipsi.1.in )