diff options
author | Felix Fietkau <nbd@openwrt.org> | 2006-11-04 00:21:54 +0000 |
---|---|---|
committer | Felix Fietkau <nbd@openwrt.org> | 2006-11-04 00:21:54 +0000 |
commit | 8cc785bdf6493ae87bc9f9cf67f35a6dea36af49 (patch) | |
tree | 26515de27827ae060e939356ea2af47f43465ff0 /package/comgt/files/3g.sh | |
parent | ab80113a68fe01e6a7c53b6465e44c8523589119 (diff) | |
download | master-31e0f0ae-8cc785bdf6493ae87bc9f9cf67f35a6dea36af49.tar.gz master-31e0f0ae-8cc785bdf6493ae87bc9f9cf67f35a6dea36af49.tar.bz2 master-31e0f0ae-8cc785bdf6493ae87bc9f9cf67f35a6dea36af49.zip |
move comgt to trunk and add network scripts for umts compatible with the wrt54g3g
SVN-Revision: 5433
Diffstat (limited to 'package/comgt/files/3g.sh')
-rw-r--r-- | package/comgt/files/3g.sh | 89 |
1 files changed, 89 insertions, 0 deletions
diff --git a/package/comgt/files/3g.sh b/package/comgt/files/3g.sh new file mode 100644 index 0000000000..125bec3d69 --- /dev/null +++ b/package/comgt/files/3g.sh @@ -0,0 +1,89 @@ +set_3g_led() { + grep WRT54G3G /proc/diag/model >/dev/null || return 0 + echo "$1" > /proc/diag/led/3g_green + echo "$2" > /proc/diag/led/3g_blue + echo "$3" > /proc/diag/led/3g_blink +} + +scan_3g() { + local device + + scan_ppp "$@" + config_get device "$1" device + + # try to figure out the device if it's invalid + [ -n "$device" -a -e "$device" ] || { + for device in /dev/tts/2 /dev/usb/tts/0 /dev/noz0; do + [ -e "$device" ] && { + config_set "$1" device "$device" + break + } + done + } + + # enable 3G with the 3G button by default + config_get button "$1" button + [ -z "$button" ] && { + config_set "$1" button 1 + } +} + +stop_interface_3g() { + set_3g_led 0 0 0 + killall gcom >/dev/null 2>/dev/null +} + +setup_interface_3g() { + local iface="$1" + local config="$2" + + config_get device "$config" device + + for module in slhc ppp_generic ppp_async; do + /sbin/insmod $module 2>&- >&- + done + + config_get apn "$cfg" apn + config_get service "$cfg" service + config_get pincode "$cfg" pincode + config_get mtu "$cfg" mtu + + set_3g_led 1 0 1 + + # figure out hardware specific commands for the card + if gcom -d "$device" -s /etc/gcom/getcardinfo.gcom | grep Novatel 2>/dev/null >/dev/null; then + case "$service" in + umts_only) CODE=2;; + gprs_only) CODE=1;; + *) CODE=0;; + esac + mode="AT\$NWRAT=${CODE},2" + else + case "$service" in + umts_only) CODE=1;; + gprs_only) CODE=0;; + *) CODE=3;; + esac + mode="AT_OPSYS=${CODE}" + fi + + PINCODE="$pincode" gcom -d "$device" -s /etc/gcom/setpin.gcom || { + echo "$cfg(3g): Failed to set the PIN code." + set_3g_led 0 0 0 + return 1 + } + MODE="$mode" gcom -d "$device" -s /etc/gcom/setmode.gcom + set_3g_led 1 0 0 + + start_pppd "$config" \ + noaccomp \ + nopcomp \ + novj \ + nobsdcomp \ + noauth \ + lock \ + crtscts \ + connect "USE_APN=\"$apn\" /etc/ppp/3g.connect" \ + ${mtu:+mtu $mtu mru $mtu} \ + 460800 "$device" +} |