ar71xx: add support for Cisco's MR18

This patch adds support for Cisco's MR18.
Detailed instructions for the flashing the device can
be found in the OpenWrt forum thread:
<https://forum.openwrt.org/viewtopic.php?id=59248>

Signed-off-by: Chris R Blake <chrisrblake93@gmail.com>

SVN-Revision: 47878

4 files changed, 151 insertions, 0 deletions

diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index a1125236cf..54e6166d6d 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -551,6 +551,9 @@ ar71xx_board_detect() {
 	*MR16)
 		name="mr16"
 		;;
+	*MR18)
+		name="mr18"
+		;;
 	*MR600v2)
 		name="mr600v2"
 		;;
diff --git a/target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx b/target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx
index 92b3765bb2..a9f4bf5244 100644
--- a/target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx
+++ b/target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx
@@ -29,6 +29,10 @@ preinit_set_mac_address() {
 		dir-615-i1)
 			fetch_mac_from_mtd nvram sys_lan_mac sys_wan_mac
 			;;
+		mr18)
+			mac_lan=$(mtd_get_mac_binary_ubi board-config 102)
+			[ -n "$mac_lan" ] && ifconfig eth0 hw ether "$mac_lan"
+			;;
 		r6100)
 			mac_lan=$(mtd_get_mac_binary caldata 0)
 			[ -n "$mac_lan" ] && ifconfig eth1 hw ether "$mac_lan"
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/merakinand.sh b/target/linux/ar71xx/base-files/lib/upgrade/merakinand.sh
new file mode 100644
index 0000000000..fe78e9ff96
--- /dev/null
+++ b/target/linux/ar71xx/base-files/lib/upgrade/merakinand.sh
@@ -0,0 +1,137 @@
+#!/bin/sh
+#
+# Copyright (C) 2015 Chris Blake <chrisrblake93@gmail.com>
+#
+# Custom upgrade script for Meraki NAND devices (ex. MR18)
+# Based on dir825.sh and stock nand functions
+#
+. /lib/ar71xx.sh
+. /lib/functions.sh
+. /lib/upgrade/nand.sh
+
+get_magic_at() {
+	local mtddev=$1
+	local pos=$2
+	dd bs=1 count=2 skip=$pos if=$mtddev 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"'
+}
+
+mr18_is_caldata_valid() {
+	local mtddev=$1
+	local magic
+
+	magic=$(get_magic_at $mtddev 4096)
+	[ "$magic" != "0202" ] && return 0
+
+	magic=$(get_magic_at $mtddev 20480)
+	[ "$magic" != "0202" ] && return 0
+
+	magic=$(get_magic_at $mtddev 36864)
+	[ "$magic" != "0202" ] && return 0
+
+	return 1
+}
+
+merakinand_copy_caldata() {
+	local cal_src=$1
+	local cal_dst=$2
+	local ubidev=$( nand_find_ubi $CI_UBIPART )
+	local board_name="$(cat /tmp/sysinfo/board_name)"
+	local rootfs_size="$(ubinfo /dev/ubi0 -N rootfs_data | grep "Size" | awk '{ print $6 }')"
+
+	# Setup partitions using board name, in case of future platforms
+	case "$board_name" in
+	"mr18")
+		# Src is MTD
+		mtd_src=$(find_mtd_chardev $cal_src)
+		[ -n "$mtd_src" ] || {
+			echo "no mtd device found for partition $cal_src"
+			exit 1
+		}
+
+		# Dest is UBI
+		# TODO: possibly add create (hard to do when rootfs_data is expanded & mounted)
+		# Would need to be done from ramdisk
+		mtd_dst="$(nand_find_volume $ubidev $cal_dst)"
+		[ -n "$mtd_dst" ] || {
+			echo "no ubi device found for partition $cal_dst"
+			exit 1
+		}
+
+		mr18_is_caldata_valid "$mtd_src" && {
+			echo "no valid calibration data found in $cal_src"
+			exit 1
+		}
+
+		mr18_is_caldata_valid "/dev/$mtd_dst" && {
+			echo "Copying calibration data from $cal_src to $cal_dst..."
+			dd if="$mtd_src" of=/tmp/caldata.tmp 2>/dev/null
+			ubiupdatevol "/dev/$mtd_dst" /tmp/caldata.tmp
+			rm /tmp/caldata.tmp
+			sync
+		}
+		return 0
+		;;
+	*)
+		echo "Unsupported device $board_name";
+		return 1
+		;;
+	esac
+}
+
+merakinand_do_kernel_check() {
+	local board_name="$1"
+	local tar_file="$2"
+	local image_magic_word=`(tar xf $tar_file sysupgrade-$board_name/kernel -O 2>/dev/null | dd bs=1 count=4 skip=0 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"')`
+
+	# What is our kernel magic string?
+	case "$board_name" in
+	"mr18")
+		[ "$image_magic_word" == "8e73ed8a" ] && {
+			echo "pass" && return 0
+		}
+		;;
+	esac
+
+	exit 1
+}
+
+merakinand_do_platform_check() {
+	local board_name="$1"
+	local tar_file="$2"
+	local control_length=`(tar xf $tar_file sysupgrade-$board_name/CONTROL -O | wc -c) 2> /dev/null`
+	local file_type="$(identify_tar $2 sysupgrade-$board_name/root)"
+	local kernel_magic="$(merakinand_do_kernel_check $1 $2)"
+
+	case "$board_name" in
+	"mr18")
+		[ "$control_length" = 0 -o "$file_type" != "squashfs" -o "$kernel_magic" != "pass" ] && {
+			echo "Invalid sysupgrade file for $board_name"
+			return 1
+		}
+		;;
+	*)
+		echo "Unsupported device $board_name";
+		return 1
+		;;
+	esac
+
+	return 0
+}
+
+merakinand_do_upgrade() {
+	local tar_file="$1"
+	local board_name="$(cat /tmp/sysinfo/board_name)"
+
+	# Do we need to do any platform tweaks?
+	case "$board_name" in
+	"mr18")
+		# Check and create UBI caldata if it's invalid
+		merakinand_copy_caldata "odm-caldata" "caldata"
+		nand_do_upgrade $1
+		;;
+	*)
+		echo "Unsupported device $board_name";
+		exit 1
+		;;
+	esac
+}
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 5ec4499b73..bb64ef81bc 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -434,6 +434,10 @@ platform_check_image() {
 		}
 		return 0
 		;;
+	mr18)
+		merakinand_do_platform_check $board $1
+		return $?;
+		;;
 	nbg6716 | \
 	r6100 | \
 	wndr3700v4 | \
@@ -494,6 +498,9 @@ platform_pre_upgrade() {
 	wndr4300 )
 		nand_do_upgrade "$1"
 		;;
+	mr18)
+		merakinand_do_upgrade "$1"
+		;;
 	esac
 }