diff options
author | Florian Fainelli <florian@openwrt.org> | 2013-07-09 20:52:49 +0000 |
---|---|---|
committer | Florian Fainelli <florian@openwrt.org> | 2013-07-09 20:52:49 +0000 |
commit | de69c9edb0665d43ba2caf7fb3f79200f91eb6fc (patch) | |
tree | 9020784148d49c65308491014ad8dbe28df7fbac /target/linux/brcm2708/patches-3.10/014-bcm2708-sdhci-driver.patch | |
parent | 818d2603ee2e28fa9b84c7bb67a4ffc0a6fa7e55 (diff) | |
download | master-31e0f0ae-de69c9edb0665d43ba2caf7fb3f79200f91eb6fc.tar.gz master-31e0f0ae-de69c9edb0665d43ba2caf7fb3f79200f91eb6fc.tar.bz2 master-31e0f0ae-de69c9edb0665d43ba2caf7fb3f79200f91eb6fc.zip |
brcm2708: add support for 3.10 kernel
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 37218
Diffstat (limited to 'target/linux/brcm2708/patches-3.10/014-bcm2708-sdhci-driver.patch')
-rw-r--r-- | target/linux/brcm2708/patches-3.10/014-bcm2708-sdhci-driver.patch | 2581 |
1 files changed, 2581 insertions, 0 deletions
diff --git a/target/linux/brcm2708/patches-3.10/014-bcm2708-sdhci-driver.patch b/target/linux/brcm2708/patches-3.10/014-bcm2708-sdhci-driver.patch new file mode 100644 index 0000000000..b76eaf452c --- /dev/null +++ b/target/linux/brcm2708/patches-3.10/014-bcm2708-sdhci-driver.patch @@ -0,0 +1,2581 @@ +diff -urwN linux-3.10/drivers/mmc/card/block.c linux-rpi-3.10.y/drivers/mmc/card/block.c +--- linux-3.10/drivers/mmc/card/block.c 2013-06-30 23:13:29.000000000 +0100 ++++ linux-rpi-3.10.y/drivers/mmc/card/block.c 2013-07-06 15:25:50.000000000 +0100 +@@ -1294,7 +1294,7 @@ + brq->data.blocks = 1; + } + +- if (brq->data.blocks > 1 || do_rel_wr) { ++ if (brq->data.blocks > 1 || do_rel_wr || card->host->caps2 & MMC_CAP2_FORCE_MULTIBLOCK) { + /* SPI multiblock writes terminate using a special + * token, not a STOP_TRANSMISSION request. + */ +diff -urwN linux-3.10/drivers/mmc/core/sd.c linux-rpi-3.10.y/drivers/mmc/core/sd.c +--- linux-3.10/drivers/mmc/core/sd.c 2013-06-30 23:13:29.000000000 +0100 ++++ linux-rpi-3.10.y/drivers/mmc/core/sd.c 2013-07-06 15:25:50.000000000 +0100 +@@ -13,6 +13,8 @@ + #include <linux/err.h> + #include <linux/slab.h> + #include <linux/stat.h> ++#include <linux/jiffies.h> ++#include <linux/nmi.h> + + #include <linux/mmc/host.h> + #include <linux/mmc/card.h> +@@ -58,6 +60,15 @@ + __res & __mask; \ + }) + ++// timeout for tries ++static const unsigned long retry_timeout_ms= 10*1000; ++ ++// try at least 10 times, even if timeout is reached ++static const int retry_min_tries= 10; ++ ++// delay between tries ++static const unsigned long retry_delay_ms= 10; ++ + /* + * Given the decoded CSD structure, decode the raw CID to our CID structure. + */ +@@ -210,12 +221,62 @@ + } + + /* +- * Fetch and process SD Status register. ++ * Fetch and process SD Configuration Register. ++ */ ++static int mmc_read_scr(struct mmc_card *card) ++{ ++ unsigned long timeout_at; ++ int err, tries; ++ ++ timeout_at= jiffies + msecs_to_jiffies( retry_timeout_ms ); ++ tries= 0; ++ ++ while( tries < retry_min_tries || time_before( jiffies, timeout_at ) ) ++ { ++ unsigned long delay_at; ++ tries++; ++ ++ err = mmc_app_send_scr(card, card->raw_scr); ++ if( !err ) ++ break; // success!!! ++ ++ touch_nmi_watchdog(); // we are still alive! ++ ++ // delay ++ delay_at= jiffies + msecs_to_jiffies( retry_delay_ms ); ++ while( time_before( jiffies, delay_at ) ) ++ { ++ mdelay( 1 ); ++ touch_nmi_watchdog(); // we are still alive! ++ } ++ } ++ ++ if( err) ++ { ++ pr_err("%s: failed to read SD Configuration register (SCR) after %d tries during %lu ms, error %d\n", mmc_hostname(card->host), tries, retry_timeout_ms, err ); ++ return err; ++ } ++ ++ if( tries > 1 ) ++ { ++ pr_info("%s: could read SD Configuration register (SCR) at the %dth attempt\n", mmc_hostname(card->host), tries ); ++ } ++ ++ err = mmc_decode_scr(card); ++ if (err) ++ return err; ++ ++ return err; ++} ++ ++/* ++ * Fetch and process SD Status Register. + */ + static int mmc_read_ssr(struct mmc_card *card) + { ++ unsigned long timeout_at; + unsigned int au, es, et, eo; +- int err, i; ++ int err, i, tries; + u32 *ssr; + + if (!(card->csd.cmdclass & CCC_APP_SPEC)) { +@@ -228,14 +289,40 @@ + if (!ssr) + return -ENOMEM; + ++ timeout_at= jiffies + msecs_to_jiffies( retry_timeout_ms ); ++ tries= 0; ++ ++ while( tries < retry_min_tries || time_before( jiffies, timeout_at ) ) ++ { ++ unsigned long delay_at; ++ tries++; ++ + err = mmc_app_sd_status(card, ssr); +- if (err) { +- pr_warning("%s: problem reading SD Status " +- "register.\n", mmc_hostname(card->host)); +- err = 0; ++ if( !err ) ++ break; // sucess!!! ++ ++ touch_nmi_watchdog(); // we are still alive! ++ ++ // delay ++ delay_at= jiffies + msecs_to_jiffies( retry_delay_ms ); ++ while( time_before( jiffies, delay_at ) ) ++ { ++ mdelay( 1 ); ++ touch_nmi_watchdog(); // we are still alive! ++ } ++ } ++ ++ if( err) ++ { ++ pr_err("%s: failed to read SD Status register (SSR) after %d tries during %lu ms, error %d\n", mmc_hostname(card->host), tries, retry_timeout_ms, err ); + goto out; + } + ++ if( tries > 1 ) ++ { ++ pr_info("%s: read SD Status register (SSR) after %d attempts\n", mmc_hostname(card->host), tries ); ++ } ++ + for (i = 0; i < 16; i++) + ssr[i] = be32_to_cpu(ssr[i]); + +@@ -808,13 +895,9 @@ + + if (!reinit) { + /* +- * Fetch SCR from card. ++ * Fetch and decode SD Configuration register. + */ +- err = mmc_app_send_scr(card, card->raw_scr); +- if (err) +- return err; +- +- err = mmc_decode_scr(card); ++ err = mmc_read_scr(card); + if (err) + return err; + +diff -urwN linux-3.10/drivers/mmc/host/Kconfig linux-rpi-3.10.y/drivers/mmc/host/Kconfig +--- linux-3.10/drivers/mmc/host/Kconfig 2013-06-30 23:13:29.000000000 +0100 ++++ linux-rpi-3.10.y/drivers/mmc/host/Kconfig 2013-07-06 15:25:50.000000000 +0100 +@@ -249,6 +249,27 @@ + + YMMV. + ++config MMC_SDHCI_BCM2708 ++ tristate "SDHCI support on BCM2708" ++ depends on MMC_SDHCI && MACH_BCM2708 ++ select MMC_SDHCI_IO_ACCESSORS ++ help ++ This selects the Secure Digital Host Controller Interface (SDHCI) ++ often referrered to as the eMMC block. ++ ++ If you have a controller with this interface, say Y or M here. ++ ++ If unsure, say N. ++ ++config MMC_SDHCI_BCM2708_DMA ++ bool "DMA support on BCM2708 Arasan controller" ++ depends on MMC_SDHCI_BCM2708 ++ help ++ Enable DMA support on the Arasan SDHCI controller in Broadcom 2708 ++ based chips. ++ ++ If unsure, say N. ++ + config MMC_SDHCI_BCM2835 + tristate "SDHCI platform support for the BCM2835 SD/MMC Controller" + depends on ARCH_BCM2835 +diff -urwN linux-3.10/drivers/mmc/host/Makefile linux-rpi-3.10.y/drivers/mmc/host/Makefile +--- linux-3.10/drivers/mmc/host/Makefile 2013-06-30 23:13:29.000000000 +0100 ++++ linux-rpi-3.10.y/drivers/mmc/host/Makefile 2013-07-06 15:25:50.000000000 +0100 +@@ -15,6 +15,7 @@ + obj-$(CONFIG_MMC_SDHCI_S3C) += sdhci-s3c.o + obj-$(CONFIG_MMC_SDHCI_SIRF) += sdhci-sirf.o + obj-$(CONFIG_MMC_SDHCI_SPEAR) += sdhci-spear.o ++obj-$(CONFIG_MMC_SDHCI_BCM2708) += sdhci-bcm2708.o + obj-$(CONFIG_MMC_WBSD) += wbsd.o + obj-$(CONFIG_MMC_AU1X) += au1xmmc.o + obj-$(CONFIG_MMC_OMAP) += omap.o +diff -urwN linux-3.10/drivers/mmc/host/sdhci-bcm2708.c linux-rpi-3.10.y/drivers/mmc/host/sdhci-bcm2708.c +--- linux-3.10/drivers/mmc/host/sdhci-bcm2708.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-rpi-3.10.y/drivers/mmc/host/sdhci-bcm2708.c 2013-07-06 15:25:50.000000000 +0100 +@@ -0,0 +1,1420 @@ ++/* ++ * sdhci-bcm2708.c Support for SDHCI device on BCM2708 ++ * Copyright (c) 2010 Broadcom ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. ++ */ ++ ++/* Supports: ++ * SDHCI platform device - Arasan SD controller in BCM2708 ++ * ++ * Inspired by sdhci-pci.c, by Pierre Ossman ++ */ ++ ++#include <linux/delay.h> ++#include <linux/highmem.h> ++#include <linux/platform_device.h> ++#include <linux/module.h> ++#include <linux/mmc/mmc.h> ++#include <linux/mmc/host.h> ++#include <linux/mmc/sd.h> ++ ++#include <linux/io.h> ++#include <linux/dma-mapping.h> ++#include <mach/dma.h> ++ ++#include "sdhci.h" ++ ++/*****************************************************************************\ ++ * * ++ * Configuration * ++ * * ++\*****************************************************************************/ ++ ++#define DRIVER_NAME "bcm2708_sdhci" ++ ++/* for the time being insist on DMA mode - PIO seems not to work */ ++#ifndef CONFIG_MMC_SDHCI_BCM2708_DMA ++#warning Non-DMA (PIO) version of this driver currently unavailable ++#endif ++#undef CONFIG_MMC_SDHCI_BCM2708_DMA ++#define CONFIG_MMC_SDHCI_BCM2708_DMA y ++ ++#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA ++/* #define CHECK_DMA_USE */ ++#endif ++//#define LOG_REGISTERS ++ ++#define USE_SCHED_TIME ++#define USE_SPACED_WRITES_2CLK 1 /* space consecutive register writes */ ++#define USE_SOFTWARE_TIMEOUTS 1 /* not hardware timeouts */ ++#define SOFTWARE_ERASE_TIMEOUT_SEC 30 ++ ++#define SDHCI_BCM_DMA_CHAN 4 /* this default is normally overriden */ ++#define SDHCI_BCM_DMA_WAITS 0 /* delays slowing DMA transfers: 0-31 */ ++/* We are worried that SD card DMA use may be blocking the AXI bus for others */ ++ ++/*! TODO: obtain these from the physical address */ ++#define DMA_SDHCI_BASE 0x7e300000 /* EMMC register block on Videocore */ ++#define DMA_SDHCI_BUFFER (DMA_SDHCI_BASE + SDHCI_BUFFER) ++ ++#define BCM2708_SDHCI_SLEEP_TIMEOUT 1000 /* msecs */ ++ ++/* Mhz clock that the EMMC core is running at. Should match the platform clockman settings */ ++#define BCM2708_EMMC_CLOCK_FREQ 50000000 ++ ++#define REG_EXRDFIFO_EN 0x80 ++#define REG_EXRDFIFO_CFG 0x84 ++ ++int cycle_delay=2; ++ ++/*****************************************************************************\ ++ * * ++ * Debug * ++ * * ++\*****************************************************************************/ ++ ++ ++ ++#define DBG(f, x...) \ ++ pr_debug(DRIVER_NAME " [%s()]: " f, __func__,## x) ++// printk(KERN_INFO DRIVER_NAME " [%s()]: " f, __func__,## x)//GRAYG ++ ++ ++/*****************************************************************************\ ++ * * ++ * High Precision Time * ++ * * ++\*****************************************************************************/ ++ ++#ifdef USE_SCHED_TIME ++ ++#include <mach/frc.h> ++ ++typedef unsigned long hptime_t; ++ ++#define FMT_HPT "lu" ++ ++static inline hptime_t hptime(void) ++{ ++ return frc_clock_ticks32(); ++} ++ ++#define HPTIME_CLK_NS 1000ul ++ ++#else ++ ++typedef unsigned long hptime_t; ++ ++#define FMT_HPT "lu" ++ ++static inline hptime_t hptime(void) ++{ ++ return jiffies; ++} ++ ++#define HPTIME_CLK_NS (1000000000ul/HZ) ++ ++#endif ++ ++static inline unsigned long int since_ns(hptime_t t) ++{ ++ return (unsigned long)((hptime() - t) * HPTIME_CLK_NS); ++} ++ ++static bool allow_highspeed = 1; ++static int emmc_clock_freq = BCM2708_EMMC_CLOCK_FREQ; ++static bool sync_after_dma = 1; ++static bool missing_status = 1; ++static bool spurious_crc_acmd51 = 0; ++bool enable_llm = 1; ++bool extra_messages = 0; ++ ++#if 0 ++static void hptime_test(void) ++{ ++ hptime_t now; ++ hptime_t later; ++ ++ now = hptime(); ++ msleep(10); ++ later = hptime(); ++ ++ printk(KERN_INFO DRIVER_NAME": 10ms = %"FMT_HPT" clks " ++ "(from %"FMT_HPT" to %"FMT_HPT") = %luns\n", ++ later-now, now, later, ++ (unsigned long)(HPTIME_CLK_NS * (later - now))); ++ ++ now = hptime(); ++ msleep(1000); ++ later = hptime(); ++ ++ printk(KERN_INFO DRIVER_NAME": 1s = %"FMT_HPT" clks " ++ "(from %"FMT_HPT" to %"FMT_HPT") = %luns\n", ++ later-now, now, later, ++ (unsigned long)(HPTIME_CLK_NS * (later - now))); ++} ++#endif ++ ++/*****************************************************************************\ ++ * * ++ * SDHCI core callbacks * ++ * * ++\*****************************************************************************/ ++ ++ ++#ifdef CHECK_DMA_USE ++/*#define CHECK_DMA_REG_USE*/ ++#endif ++ ++#ifdef CHECK_DMA_REG_USE ++/* we don't expect anything to be using these registers during a ++ DMA (except the IRQ status) - so check */ ++static void check_dma_reg_use(struct sdhci_host *host, int reg); ++#else ++#define check_dma_reg_use(host, reg) ++#endif ++ ++ ++static inline u32 sdhci_bcm2708_raw_readl(struct sdhci_host *host, int reg) ++{ ++ return readl(host->ioaddr + reg); ++} ++ ++u32 sdhci_bcm2708_readl(struct sdhci_host *host, int reg) ++{ ++ u32 l = sdhci_bcm2708_raw_readl(host, reg); ++ ++#ifdef LOG_REGISTERS ++ printk(KERN_ERR "%s: readl from 0x%02x, value 0x%08x\n", ++ mmc_hostname(host->mmc), reg, l); ++#endif ++ check_dma_reg_use(host, reg); ++ ++ return l; ++} ++ ++u16 sdhci_bcm2708_readw(struct sdhci_host *host, int reg) ++{ ++ u32 l = sdhci_bcm2708_raw_readl(host, reg & ~3); ++ u32 w = l >> (reg << 3 & 0x18) & 0xffff; ++ ++#ifdef LOG_REGISTERS ++ printk(KERN_ERR "%s: readw from 0x%02x, value 0x%04x\n", ++ mmc_hostname(host->mmc), reg, w); ++#endif ++ check_dma_reg_use(host, reg); ++ ++ return (u16)w; ++} ++ ++u8 sdhci_bcm2708_readb(struct sdhci_host *host, int reg) ++{ ++ u32 l = sdhci_bcm2708_raw_readl(host, reg & ~3); ++ u32 b = l >> (reg << 3 & 0x18) & 0xff; ++ ++#ifdef LOG_REGISTERS ++ printk(KERN_ERR "%s: readb from 0x%02x, value 0x%02x\n", ++ mmc_hostname(host->mmc), reg, b); ++#endif ++ check_dma_reg_use(host, reg); ++ ++ return (u8)b; ++} ++ ++ ++static void sdhci_bcm2708_raw_writel(struct sdhci_host *host, u32 val, int reg) ++{ ++ u32 ier; ++ ++#if USE_SPACED_WRITES_2CLK ++ static bool timeout_disabled = false; ++ unsigned int ns_2clk = 0; ++ ++ /* The Arasan has a bugette whereby it may lose the content of ++ * successive writes to registers that are within two SD-card clock ++ * cycles of each other (a clock domain crossing problem). ++ * It seems, however, that the data register does not have this problem. ++ * (Which is just as well - otherwise we'd have to nobble the DMA engine ++ * too) ++ */ ++ if (reg != SDHCI_BUFFER && host->clock != 0) { ++ /* host->clock is the clock freq in Hz */ ++ static hptime_t last_write_hpt; ++ hptime_t now = hptime(); ++ ns_2clk = cycle_delay*1000000/(host->clock/1000); ++ ++ if (now == last_write_hpt || now == last_write_hpt+1) { ++ /* we can't guarantee any significant time has ++ * passed - we'll have to wait anyway ! */ ++ ndelay(ns_2clk); ++ } else ++ { ++ /* we must have waited at least this many ns: */ ++ unsigned int ns_wait = HPTIME_CLK_NS * ++ (last_write_hpt - now - 1); ++ if (ns_wait < ns_2clk) ++ ndelay(ns_2clk - ns_wait); ++ } ++ last_write_hpt = now; ++ } ++#if USE_SOFTWARE_TIMEOUTS ++ /* The Arasan is clocked for timeouts using the SD clock which is too ++ * fast for ERASE commands and causes issues. So we disable timeouts ++ * for ERASE */ ++ if (host->cmd != NULL && host->cmd->opcode == MMC_ERASE && ++ reg == (SDHCI_COMMAND & ~3)) { ++ mod_timer(&host->timer, ++ jiffies + SOFTWARE_ERASE_TIMEOUT_SEC * HZ); ++ ier = readl(host->ioaddr + SDHCI_SIGNAL_ENABLE); ++ ier &= ~SDHCI_INT_DATA_TIMEOUT; ++ writel(ier, host->ioaddr + SDHCI_SIGNAL_ENABLE); ++ timeout_disabled = true; ++ ndelay(ns_2clk); ++ } else if (timeout_disabled) { ++ ier = readl(host->ioaddr + SDHCI_SIGNAL_ENABLE); ++ ier |= SDHCI_INT_DATA_TIMEOUT; ++ writel(ier, host->ioaddr + SDHCI_SIGNAL_ENABLE); ++ timeout_disabled = false; ++ ndelay(ns_2clk); ++ } ++#endif ++ writel(val, host->ioaddr + reg); ++#else ++ void __iomem * regaddr = host->ioaddr + reg; ++ ++ writel(val, regaddr); ++ ++ if (reg != SDHCI_BUFFER && reg != SDHCI_INT_STATUS && host->clock != 0) ++ { ++ int timeout = 100000; ++ while (val != readl(regaddr) && --timeout > 0) ++ continue; ++ ++ if (timeout <= 0) ++ printk(KERN_ERR "%s: writing 0x%X to reg 0x%X " ++ "always gives 0x%X\n", ++ mmc_hostname(host->mmc), ++ val, reg, readl(regaddr)); ++ BUG_ON(timeout <= 0); ++ } ++#endif ++} ++ ++ ++void sdhci_bcm2708_writel(struct sdhci_host *host, u32 val, int reg) ++{ ++#ifdef LOG_REGISTERS ++ printk(KERN_ERR "%s: writel to 0x%02x, value 0x%08x\n", ++ mmc_hostname(host->mmc), reg, val); ++#endif ++ check_dma_reg_use(host, reg); ++ ++ sdhci_bcm2708_raw_writel(host, val, reg); ++} ++ ++void sdhci_bcm2708_writew(struct sdhci_host *host, u16 val, int reg) ++{ ++ static u32 shadow = 0; ++ ++ u32 p = reg == SDHCI_COMMAND ? shadow : ++ sdhci_bcm2708_raw_readl(host, reg & ~3); ++ u32 s = reg << 3 & 0x18; ++ u32 l = val << s; ++ u32 m = 0xffff << s; ++ ++#ifdef LOG_REGISTERS ++ printk(KERN_ERR "%s: writew to 0x%02x, value 0x%04x\n", ++ mmc_hostname(host->mmc), reg, val); ++#endif ++ ++ if (reg == SDHCI_TRANSFER_MODE) ++ shadow = (p & ~m) | l; ++ else { ++ check_dma_reg_use(host, reg); ++ sdhci_bcm2708_raw_writel(host, (p & ~m) | l, reg & ~3); ++ } ++} ++ ++void sdhci_bcm2708_writeb(struct sdhci_host *host, u8 val, int reg) ++{ ++ u32 p = sdhci_bcm2708_raw_readl(host, reg & ~3); ++ u32 s = reg << 3 & 0x18; ++ u32 l = val << s; ++ u32 m = 0xff << s; ++ ++#ifdef LOG_REGISTERS ++ printk(KERN_ERR "%s: writeb to 0x%02x, value 0x%02x\n", ++ mmc_hostname(host->mmc), reg, val); ++#endif ++ ++ check_dma_reg_use(host, reg); ++ sdhci_bcm2708_raw_writel(host, (p & ~m) | l, reg & ~3); ++} ++ ++static unsigned int sdhci_bcm2708_get_max_clock(struct sdhci_host *host) ++{ ++ return emmc_clock_freq; ++} ++ ++/*****************************************************************************\ ++ * * ++ * DMA Operation * ++ * * ++\*****************************************************************************/ ++ ++struct sdhci_bcm2708_priv { ++ int dma_chan; ++ int dma_irq; ++ void __iomem *dma_chan_base; ++ struct bcm2708_dma_cb *cb_base; /* DMA control blocks */ ++ dma_addr_t cb_handle; ++ /* tracking scatter gather progress */ ++ unsigned sg_ix; /* scatter gather list index */ ++ unsigned sg_done; /* bytes in current sg_ix done */ ++#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA ++ unsigned char dma_wanted; /* DMA transfer requested */ ++ unsigned char dma_waits; /* wait states in DMAs */ ++#ifdef CHECK_DMA_USE ++ unsigned char dmas_pending; /* no of unfinished DMAs */ ++ hptime_t when_started; ++ hptime_t when_reset; ++ hptime_t when_stopped; ++#endif ++#endif ++ /* signalling the end of a transfer */ ++ void (*complete)(struct sdhci_host *); ++}; ++ ++#define SDHCI_HOST_PRIV(host) \ ++ (struct sdhci_bcm2708_priv *)((struct sdhci_host *)(host)+1) ++ ++ ++ ++#ifdef CHECK_DMA_REG_USE ++static void check_dma_reg_use(struct sdhci_host *host, int reg) ++{ ++ struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host); ++ if (host_priv->dma_wanted && reg != SDHCI_INT_STATUS) { ++ printk(KERN_INFO"%s: accessing register 0x%x during DMA\n", ++ mmc_hostname(host->mmc), reg); ++ } ++} ++#endif ++ ++ ++ ++#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA ++ ++static void sdhci_clear_set_irqgen(struct sdhci_host *host, u32 clear, u32 set) ++{ ++ u32 ier; ++ ++ ier = sdhci_bcm2708_raw_readl(host, SDHCI_SIGNAL_ENABLE); ++ ier &= ~clear; ++ ier |= set; ++ /* change which requests generate IRQs - makes no difference to ++ the content of SDHCI_INT_STATUS, or the need to acknowledge IRQs */ ++ sdhci_bcm2708_raw_writel(host, ier, SDHCI_SIGNAL_ENABLE); ++} ++ ++static void sdhci_signal_irqs(struct sdhci_host *host, u32 irqs) ++{ ++ sdhci_clear_set_irqgen(host, 0, irqs); ++} ++ ++static void sdhci_unsignal_irqs(struct sdhci_host *host, u32 irqs) ++{ ++ sdhci_clear_set_irqgen(host, irqs, 0); ++} ++ ++ ++ ++static void schci_bcm2708_cb_read(struct sdhci_bcm2708_priv *host, ++ int ix, ++ dma_addr_t dma_addr, unsigned len, ++ int /*bool*/ is_last) ++{ ++ struct bcm2708_dma_cb *cb = &host->cb_base[ix]; ++ unsigned char dmawaits = host->dma_waits; ++ ++ cb->info = BCM2708_DMA_PER_MAP(BCM2708_DMA_DREQ_EMMC) | ++ BCM2708_DMA_WAITS(dmawaits) | ++ BCM2708_DMA_S_DREQ | ++ BCM2708_DMA_D_WIDTH | ++ BCM2708_DMA_D_INC; ++ cb->src = DMA_SDHCI_BUFFER; /* DATA register DMA address */ ++ cb->dst = dma_addr; ++ cb->length = len; ++ cb->stride = 0; ++ ++ if (is_last) { ++ cb->info |= BCM2708_DMA_INT_EN | ++ BCM2708_DMA_WAIT_RESP; ++ cb->next = 0; ++ } else ++ cb->next = host->cb_handle + ++ (ix+1)*sizeof(struct bcm2708_dma_cb); ++ ++ cb->pad[0] = 0; ++ cb->pad[1] = 0; ++} ++ ++static void schci_bcm2708_cb_write(struct sdhci_bcm2708_priv *host, ++ int ix, ++ dma_addr_t dma_addr, unsigned len, ++ int /*bool*/ is_last) ++{ ++ struct bcm2708_dma_cb *cb = &host->cb_base[ix]; ++ unsigned char dmawaits = host->dma_waits; ++ ++ /* We can make arbitrarily large writes as long as we specify DREQ to ++ pace the delivery of bytes to the Arasan hardware */ ++ cb->info = BCM2708_DMA_PER_MAP(BCM2708_DMA_DREQ_EMMC) | ++ BCM2708_DMA_WAITS(dmawaits) | ++ BCM2708_DMA_D_DREQ | ++ BCM2708_DMA_S_WIDTH | ++ BCM2708_DMA_S_INC; ++ cb->src = dma_addr; ++ cb->dst = DMA_SDHCI_BUFFER; /* DATA register DMA address */ ++ cb->length = len; ++ cb->stride = 0; ++ ++ if (is_last) { ++ cb->info |= BCM2708_DMA_INT_EN | ++ BCM2708_DMA_WAIT_RESP; ++ cb->next = 0; ++ } else ++ cb->next = host->cb_handle + ++ (ix+1)*sizeof(struct bcm2708_dma_cb); ++ ++ cb->pad[0] = 0; ++ cb->pad[1] = 0; ++} ++ ++ ++static void schci_bcm2708_dma_go(struct sdhci_host *host) ++{ ++ struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host); ++ void __iomem *dma_chan_base = host_priv->dma_chan_base; ++ ++ BUG_ON(host_priv->dma_wanted); ++#ifdef CHECK_DMA_USE ++ if (host_priv->dma_wanted) ++ printk(KERN_ERR "%s: DMA already in progress - " ++ "now %"FMT_HPT", last started %lu " ++ "reset %lu stopped %lu\n", ++ mmc_hostname(host->mmc), ++ hptime(), since_ns(host_priv->when_started), ++ since_ns(host_priv->when_reset), ++ since_ns(host_priv->when_stopped)); ++ else if (host_priv->dmas_pending > 0) ++ printk(KERN_INFO "%s: note - new DMA when %d reset DMAs " ++ "already in progress - " ++ "now %"FMT_HPT", started %lu reset %lu stopped %lu\n", ++ mmc_hostname(host->mmc), ++ host_priv->dmas_pending, ++ hptime(), since_ns(host_priv->when_started), ++ since_ns(host_priv->when_reset), ++ since_ns(host_priv->when_stopped)); ++ host_priv->dmas_pending += 1; ++ host_priv->when_started = hptime(); ++#endif ++ host_priv->dma_wanted = 1; ++ DBG("PDMA go - base %p handle %08X\n", dma_chan_base, ++ host_priv->cb_handle); ++ bcm_dma_start(dma_chan_base, host_priv->cb_handle); ++} ++ ++ ++static void ++sdhci_platdma_read(struct sdhci_host *host, dma_addr_t dma_addr, size_t len) ++{ ++ struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host); ++ ++ DBG("PDMA to read %d bytes\n", len); ++ host_priv->sg_done += len; ++ schci_bcm2708_cb_read(host_priv, 0, dma_addr, len, 1/*TRUE*/); ++ schci_bcm2708_dma_go(host); ++} ++ ++ ++static void ++sdhci_platdma_write(struct sdhci_host *host, dma_addr_t dma_addr, size_t len) ++{ ++ struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host); ++ ++ DBG("PDMA to write %d bytes\n", len); ++ //BUG_ON(0 != (len & 0x1ff)); ++ ++ host_priv->sg_done += len; ++ schci_bcm2708_cb_write(host_priv, 0, dma_addr, len, 1/*TRUE*/); ++ schci_bcm2708_dma_go(host); ++} ++ ++/*! space is avaiable to receive into or data is available to write ++ Platform DMA exported function ++*/ ++void ++sdhci_bcm2708_platdma_avail(struct sdhci_host *host, unsigned int *ref_intmask, ++ void(*completion_callback)(struct sdhci_host *host)) ++{ ++ struct mmc_data *data = host->data; ++ struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host); ++ int sg_ix; ++ size_t bytes; ++ dma_addr_t addr; ++ ++ BUG_ON(NULL == data); ++ BUG_ON(0 == data->blksz); ++ ++ host_priv->complete = completion_callback; ++ ++ sg_ix = host_priv->sg_ix; ++ BUG_ON(sg_ix >= data->sg_len); ++ ++ /* we can DMA blocks larger than blksz - it may hang the DMA ++ channel but we are its only user */ ++ bytes = sg_dma_len(&data->sg[sg_ix]) - host_priv->sg_done; ++ addr = sg_dma_address(&data->sg[sg_ix]) + host_priv->sg_done; ++ ++ if (bytes > 0) { ++ /* We're going to poll for read/write available state until ++ we finish this DMA ++ */ ++ ++ if (data->flags & MMC_DATA_READ) { ++ if (*ref_intmask & SDHCI_INT_DATA_AVAIL) { ++ sdhci_unsignal_irqs(host, SDHCI_INT_DATA_AVAIL | ++ SDHCI_INT_SPACE_AVAIL); ++ sdhci_platdma_read(host, addr, bytes); ++ } ++ } else { ++ if (*ref_intmask & SDHCI_INT_SPACE_AVAIL) { ++ sdhci_unsignal_irqs(host, SDHCI_INT_DATA_AVAIL | ++ SDHCI_INT_SPACE_AVAIL); ++ sdhci_platdma_write(host, addr, bytes); ++ } ++ } ++ } ++ /* else: ++ we have run out of bytes that need transferring (e.g. we may be in ++ the middle of the last DMA transfer), or ++ it is also possible that we've been called when another IRQ is ++ signalled, even though we've turned off signalling of our own IRQ */ ++ ++ *ref_intmask &= ~SDHCI_INT_DATA_END; ++ /* don't let the main sdhci driver act on this .. we'll deal with it ++ when we respond to the DMA - if one is currently in progress */ ++} ++ ++/* is it possible to DMA the given mmc_data structure? ++ Platform DMA exported function ++*/ ++int /*bool*/ ++sdhci_bcm2708_platdma_dmaable(struct sdhci_host *host, struct mmc_data *data) ++{ ++ struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host); ++ int ok = bcm_sg_suitable_for_dma(data->sg, data->sg_len); ++ ++ if (!ok) ++ DBG("Reverting to PIO - bad cache alignment\n"); ++ ++ else { ++ host_priv->sg_ix = 0; /* first SG index */ ++ host_priv->sg_done = 0; /* no bytes done */ ++ } ++ ++ return ok; ++} ++ ++#include <mach/arm_control.h> //GRAYG ++/*! the current SD transacton has been abandonned ++ We need to tidy up if we were in the middle of a DMA ++ Platform DMA exported function ++*/ ++void ++sdhci_bcm2708_platdma_reset(struct sdhci_host *host, struct mmc_data *data) ++{ ++ struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host); ++// unsigned long flags; ++ ++ BUG_ON(NULL == host); ++ ++// spin_lock_irqsave(&host->lock, flags); ++ ++ if (host_priv->dma_wanted) { ++ if (NULL == data) { ++ printk(KERN_ERR "%s: ongoing DMA reset - no data!\n", ++ mmc_hostname(host->mmc)); ++ BUG_ON(NULL == data); ++ } else { ++ struct scatterlist *sg; ++ int sg_len; ++ int sg_todo; ++ int rc; ++ unsigned long cs; ++ ++ sg = data->sg; ++ sg_len = data->sg_len; ++ sg_todo = sg_dma_len(&sg[host_priv->sg_ix]); ++ ++ cs = readl(host_priv->dma_chan_base + BCM2708_DMA_CS); ++ ++ if (!(BCM2708_DMA_ACTIVE & cs)) ++ { ++ if (extra_messages) ++ printk(KERN_INFO "%s: missed completion of " ++ "cmd %d DMA (%d/%d [%d]/[%d]) - " ++ "ignoring it\n", ++ mmc_hostname(host->mmc), ++ host->last_cmdop, ++ host_priv->sg_done, sg_todo, ++ host_priv->sg_ix+1, sg_len); ++ } ++ else ++ printk(KERN_INFO "%s: resetting ongoing cmd %d" ++ "DMA before %d/%d [%d]/[%d] complete\n", ++ mmc_hostname(host->mmc), ++ host->last_cmdop, ++ host_priv->sg_done, sg_todo, ++ host_priv->sg_ix+1, sg_len); ++#ifdef CHECK_DMA_USE ++ printk(KERN_INFO "%s: now %"FMT_HPT" started %lu " ++ "last reset %lu last stopped %lu\n", ++ mmc_hostname(host->mmc), ++ hptime(), since_ns(host_priv->when_started), ++ since_ns(host_priv->when_reset), ++ since_ns(host_priv->when_stopped)); ++ { unsigned long info, debug; ++ void __iomem *base; ++ unsigned long pend0, pend1, pend2; ++ ++ base = host_priv->dma_chan_base; ++ cs = readl(base + BCM2708_DMA_CS); ++ info = readl(base + BCM2708_DMA_INFO); ++ debug = readl(base + BCM2708_DMA_DEBUG); ++ printk(KERN_INFO "%s: DMA%d CS=%08lX TI=%08lX " ++ "DEBUG=%08lX\n", ++ mmc_hostname(host->mmc), ++ host_priv->dma_chan, ++ cs, info, debug); ++ pend0 = readl(__io_address(ARM_IRQ_PEND0)); ++ pend1 = readl(__io_address(ARM_IRQ_PEND1)); ++ pend2 = readl(__io_address(ARM_IRQ_PEND2)); ++ ++ printk(KERN_INFO "%s: PEND0=%08lX " ++ "PEND1=%08lX PEND2=%08lX\n", ++ mmc_hostname(host->mmc), ++ pend0, pend1, pend2); ++ ++ //gintsts = readl(__io_address(GINTSTS)); ++ //gintmsk = readl(__io_address(GINTMSK)); ++ //printk(KERN_INFO "%s: USB GINTSTS=%08lX" ++ // "GINTMSK=%08lX\n", ++ // mmc_hostname(host->mmc), gintsts, gintmsk); ++ } ++#endif ++ rc = bcm_dma_abort(host_priv->dma_chan_base); ++ BUG_ON(rc != 0); ++ } ++ host_priv->dma_wanted = 0; ++#ifdef CHECK_DMA_USE ++ host_priv->when_reset = hptime(); ++#endif ++ } ++ ++// spin_unlock_irqrestore(&host->lock, flags); ++} ++ ++ ++static void sdhci_bcm2708_dma_complete_irq(struct sdhci_host *host, ++ u32 dma_cs) ++{ ++ struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host); ++ struct mmc_data *data; ++ struct scatterlist *sg; ++ int sg_len; ++ int sg_ix; ++ int sg_todo; ++// unsigned long flags; ++ ++ BUG_ON(NULL == host); ++ ++// spin_lock_irqsave(&host->lock, flags); ++ data = host->data; ++ ++#ifdef CHECK_DMA_USE ++ if (host_priv->dmas_pending <= 0) ++ DBG("on completion no DMA in progress - " ++ "now %"FMT_HPT" started %lu reset %lu stopped %lu\n", ++ hptime(), since_ns(host_priv->when_started), ++ since_ns(host_priv->when_reset), ++ since_ns(host_priv->when_stopped)); ++ else if (host_priv->dmas_pending > 1) ++ DBG("still %d DMA in progress after completion - " ++ "now %"FMT_HPT" started %lu reset %lu stopped %lu\n", ++ host_priv->dmas_pending - 1, ++ hptime(), since_ns(host_priv->when_started), ++ since_ns(host_priv->when_reset), ++ since_ns(host_priv->when_stopped)); ++ BUG_ON(host_priv->dmas_pending <= 0); ++ host_priv->dmas_pending -= 1; ++ host_priv->when_stopped = hptime(); ++#endif ++ host_priv->dma_wanted = 0; ++ ++ if (NULL == data) { ++ DBG("PDMA unused completion - status 0x%X\n", dma_cs); ++// spin_unlock_irqrestore(&host->lock, flags); ++ return; ++ } ++ sg = data->sg; ++ sg_len = data->sg_len; ++ sg_todo = sg_dma_len(&sg[host_priv->sg_ix]); ++ ++ DBG("PDMA complete %d/%d [%d]/[%d]..\n", ++ host_priv->sg_done, sg_todo, ++ host_priv->sg_ix+1, sg_len); ++ ++ BUG_ON(host_priv->sg_done > sg_todo); ++ ++ if (host_priv->sg_done >= sg_todo) { ++ host_priv->sg_ix++; ++ host_priv->sg_done = 0; ++ } ++ ++ sg_ix = host_priv->sg_ix; ++ if (sg_ix < sg_len) { ++ u32 irq_mask; ++ /* Set off next DMA if we've got the capacity */ ++ ++ if (data->flags & MMC_DATA_READ) ++ irq_mask = SDHCI_INT_DATA_AVAIL; ++ else ++ irq_mask = SDHCI_INT_SPACE_AVAIL; ++ ++ /* We have to use the interrupt status register on the BCM2708 ++ rather than the SDHCI_PRESENT_STATE register because latency ++ in the glue logic means that the information retrieved from ++ the latter is not always up-to-date w.r.t the DMA engine - ++ it may not indicate that a read or a write is ready yet */ ++ if (sdhci_bcm2708_raw_readl(host, SDHCI_INT_STATUS) & ++ irq_mask) { ++ size_t bytes = sg_dma_len(&sg[sg_ix]) - ++ host_priv->sg_done; ++ dma_addr_t addr = sg_dma_address(&data->sg[sg_ix]) + ++ host_priv->sg_done; ++ ++ /* acknowledge interrupt */ ++ sdhci_bcm2708_raw_writel(host, irq_mask, ++ SDHCI_INT_STATUS); ++ ++ BUG_ON(0 == bytes); ++ ++ if (data->flags & MMC_DATA_READ) ++ sdhci_platdma_read(host, addr, bytes); ++ else ++ sdhci_platdma_write(host, addr, bytes); ++ } else { ++ DBG("PDMA - wait avail\n"); ++ /* may generate an IRQ if already present */ ++ sdhci_signal_irqs(host, SDHCI_INT_DATA_AVAIL | ++ SDHCI_INT_SPACE_AVAIL); ++ } ++ } else { ++ if (sync_after_dma) { ++ /* On the Arasan controller the stop command (which will be ++ scheduled after this completes) does not seem to work ++ properly if we allow it to be issued when we are ++ transferring data to/from the SD card. ++ We get CRC and DEND errors unless we wait for ++ the SD controller to finish reading/writing to the card. */ ++ u32 state_mask; ++ int timeout=30*5000; ++ ++ DBG("PDMA over - sync card\n"); ++ if (data->flags & MMC_DATA_READ) ++ state_mask = SDHCI_DOING_READ; ++ else ++ state_mask = SDHCI_DOING_WRITE; ++ ++ while (0 != (sdhci_bcm2708_raw_readl(host, SDHCI_PRESENT_STATE) ++ & state_mask) && --timeout > 0) ++ { ++ udelay(1); ++ continue; ++ } ++ if (timeout <= 0) ++ printk(KERN_ERR"%s: final %s to SD card still " ++ "running\n", ++ mmc_hostname(host->mmc), ++ data->flags & MMC_DATA_READ? "read": "write"); ++ } ++ if (host_priv->complete) { ++ (*host_priv->complete)(host); ++ DBG("PDMA %s complete\n", ++ data->flags & MMC_DATA_READ?"read":"write"); ++ sdhci_signal_irqs(host, SDHCI_INT_DATA_AVAIL | ++ SDHCI_INT_SPACE_AVAIL); ++ } ++ } ++// spin_unlock_irqrestore(&host->lock, flags); ++} ++ ++static irqreturn_t sdhci_bcm2708_dma_irq(int irq, void *dev_id) ++{ ++ irqreturn_t result = IRQ_NONE; ++ struct sdhci_host *host = dev_id; ++ struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host); ++ u32 dma_cs; /* control and status register */ ++ ++ BUG_ON(NULL == dev_id); ++ BUG_ON(NULL == host_priv->dma_chan_base); ++ ++ sdhci_spin_lock(host); ++ ++ dma_cs = readl(host_priv->dma_chan_base + BCM2708_DMA_CS); ++ ++ if (dma_cs & BCM2708_DMA_ERR) { ++ unsigned long debug; ++ debug = readl(host_priv->dma_chan_base + ++ BCM2708_DMA_DEBUG); ++ printk(KERN_ERR "%s: DMA error - CS %lX DEBUG %lX\n", ++ mmc_hostname(host->mmc), (unsigned long)dma_cs, ++ (unsigned long)debug); ++ /* reset error */ ++ writel(debug, host_priv->dma_chan_base + ++ BCM2708_DMA_DEBUG); ++ } ++ if (dma_cs & BCM2708_DMA_INT) { ++ /* acknowledge interrupt */ ++ writel(BCM2708_DMA_INT, ++ host_priv->dma_chan_base + BCM2708_DMA_CS); ++ ++ dsb(); /* ARM data synchronization (push) operation */ ++ ++ if (!host_priv->dma_wanted) { ++ /* ignore this interrupt - it was reset */ ++ if (extra_messages) ++ printk(KERN_INFO "%s: DMA IRQ %X ignored - " ++ "results were reset\n", ++ mmc_hostname(host->mmc), dma_cs); ++#ifdef CHECK_DMA_USE ++ printk(KERN_INFO "%s: now %"FMT_HPT ++ " started %lu reset %lu stopped %lu\n", ++ mmc_hostname(host->mmc), hptime(), ++ since_ns(host_priv->when_started), ++ since_ns(host_priv->when_reset), ++ since_ns(host_priv->when_stopped)); ++ host_priv->dmas_pending--; ++#endif ++ } else ++ sdhci_bcm2708_dma_complete_irq(host, dma_cs); ++ ++ result = IRQ_HANDLED; ++ } ++ sdhci_spin_unlock(host); ++ ++ return result; ++} ++#endif /* CONFIG_MMC_SDHCI_BCM2708_DMA */ ++ ++ ++/***************************************************************************** \ ++ * * ++ * Device Attributes * ++ * * ++\*****************************************************************************/ ++ ++ ++/** ++ * Show the DMA-using status ++ */ ++static ssize_t attr_dma_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++ struct sdhci_host *host = (struct sdhci_host *)dev_get_drvdata(_dev); ++ ++ if (host) { ++ int use_dma = (host->flags & SDHCI_USE_PLATDMA? 1:0); ++ return sprintf(buf, "%d\n", use_dma); ++ } else ++ return -EINVAL; ++} ++ ++/** ++ * Set the DMA-using status ++ */ ++static ssize_t attr_dma_store(struct device *_dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ struct sdhci_host *host = (struct sdhci_host *)dev_get_drvdata(_dev); ++ ++ if (host) { ++#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA ++ int on = simple_strtol(buf, NULL, 0); ++ if (on) { ++ host->flags |= SDHCI_USE_PLATDMA; ++ sdhci_bcm2708_writel(host, 1, REG_EXRDFIFO_EN); ++ printk(KERN_INFO "%s: DMA enabled\n", ++ mmc_hostname(host->mmc)); ++ } else { ++ host->flags &= ~(SDHCI_USE_PLATDMA | SDHCI_REQ_USE_DMA); ++ sdhci_bcm2708_writel(host, 0, REG_EXRDFIFO_EN); ++ printk(KERN_INFO "%s: DMA disabled\n", ++ mmc_hostname(host->mmc)); ++ } ++#endif ++ return count; ++ } else ++ return -EINVAL; ++} ++ ++static DEVICE_ATTR(use_dma, S_IRUGO | S_IWUGO, attr_dma_show, attr_dma_store); ++ ++ ++/** ++ * Show the DMA wait states used ++ */ ++static ssize_t attr_dmawait_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++ struct sdhci_host *host = (struct sdhci_host *)dev_get_drvdata(_dev); ++ ++ if (host) { ++ struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host); ++ int dmawait = host_priv->dma_waits; ++ return sprintf(buf, "%d\n", dmawait); ++ } else ++ return -EINVAL; ++} ++ ++/** ++ * Set the DMA wait state used ++ */ ++static ssize_t attr_dmawait_store(struct device *_dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ struct sdhci_host *host = (struct sdhci_host *)dev_get_drvdata(_dev); ++ ++ if (host) { ++#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA ++ struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host); ++ int dma_waits = simple_strtol(buf, NULL, 0); ++ if (dma_waits >= 0 && dma_waits < 32) ++ host_priv->dma_waits = dma_waits; ++ else ++ printk(KERN_ERR "%s: illegal dma_waits value - %d", ++ mmc_hostname(host->mmc), dma_waits); ++#endif ++ return count; ++ } else ++ return -EINVAL; ++} ++ ++static DEVICE_ATTR(dma_wait, S_IRUGO | S_IWUGO, ++ attr_dmawait_show, attr_dmawait_store); ++ ++ ++/** ++ * Show the DMA-using status ++ */ ++static ssize_t attr_status_show(struct device *_dev, ++ struct device_attribute *attr, char *buf) ++{ ++ struct sdhci_host *host = (struct sdhci_host *)dev_get_drvdata(_dev); ++ ++ if (host) { ++ struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host); ++ return sprintf(buf, ++ "present: yes\n" ++ "power: %s\n" ++ "clock: %u Hz\n" ++#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA ++ "dma: %s (%d waits)\n", ++#else ++ "dma: unconfigured\n", ++#endif ++ "always on", ++ host->clock ++#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA ++ , (host->flags & SDHCI_USE_PLATDMA)? "on": "off" ++ , host_priv->dma_waits ++#endif ++ ); ++ } else ++ return -EINVAL; ++} ++ ++static DEVICE_ATTR(status, S_IRUGO, attr_status_show, NULL); ++ ++/***************************************************************************** \ ++ * * ++ * Power Management * ++ * * ++\*****************************************************************************/ ++ ++ ++#ifdef CONFIG_PM ++static int sdhci_bcm2708_suspend(struct platform_device *dev, pm_message_t state) ++{ ++ struct sdhci_host *host = (struct sdhci_host *) ++ platform_get_drvdata(dev); ++ int ret = 0; ++ ++ if (host->mmc) { ++ ret = mmc_suspend_host(host->mmc); ++ } ++ ++ return ret; ++} ++ ++static int sdhci_bcm2708_resume(struct platform_device *dev) ++{ ++ struct sdhci_host *host = (struct sdhci_host *) ++ platform_get_drvdata(dev); ++ int ret = 0; ++ ++ if (host->mmc) { ++ ret = mmc_resume_host(host->mmc); ++ } ++ ++ return ret; ++} ++#endif ++ ++ ++/*****************************************************************************\ ++ * * ++ * Device quirk functions. Implemented as local ops because the flags * ++ * field is out of space with newer kernels. This implementation can be * ++ * back ported to older kernels as well. * ++\****************************************************************************/ ++static unsigned int sdhci_bcm2708_quirk_extra_ints(struct sdhci_host *host) ++{ ++ return 1; ++} ++ ++static unsigned int sdhci_bcm2708_quirk_spurious_crc_acmd51(struct sdhci_host *host) ++{ ++ return 1; ++} ++ ++static unsigned int sdhci_bcm2708_quirk_voltage_broken(struct sdhci_host *host) ++{ ++ return 1; ++} ++ ++static unsigned int sdhci_bcm2708_uhs_broken(struct sdhci_host *host) ++{ ++ return 1; ++} ++ ++static unsigned int sdhci_bcm2708_missing_status(struct sdhci_host *host) ++{ ++ return 1; ++} ++ ++/***************************************************************************** \ ++ * * ++ * Device ops * ++ * * ++\*****************************************************************************/ ++ ++static struct sdhci_ops sdhci_bcm2708_ops = { ++#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS ++ .read_l = sdhci_bcm2708_readl, ++ .read_w = sdhci_bcm2708_readw, ++ .read_b = sdhci_bcm2708_readb, ++ .write_l = sdhci_bcm2708_writel, ++ .write_w = sdhci_bcm2708_writew, ++ .write_b = sdhci_bcm2708_writeb, ++#else ++#error The BCM2708 SDHCI driver needs CONFIG_MMC_SDHCI_IO_ACCESSORS to be set ++#endif ++ .get_max_clock = sdhci_bcm2708_get_max_clock, ++ ++#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA ++ // Platform DMA operations ++ .pdma_able = sdhci_bcm2708_platdma_dmaable, ++ .pdma_avail = sdhci_bcm2708_platdma_avail, ++ .pdma_reset = sdhci_bcm2708_platdma_reset, ++#endif ++ .extra_ints = sdhci_bcm2708_quirk_extra_ints, ++ .voltage_broken = sdhci_bcm2708_quirk_voltage_broken, ++ .uhs_broken = sdhci_bcm2708_uhs_broken, ++}; ++ ++/*****************************************************************************\ ++ * * ++ * Device probing/removal * ++ * * ++\*****************************************************************************/ ++ ++static int sdhci_bcm2708_probe(struct platform_device *pdev) ++{ ++ struct sdhci_host *host; ++ struct resource *iomem; ++ struct sdhci_bcm2708_priv *host_priv; ++ int ret; ++ ++ BUG_ON(pdev == NULL); ++ ++ iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (!iomem) { ++ ret = -ENOMEM; ++ goto err; ++ } ++ ++ if (resource_size(iomem) != 0x100) ++ dev_err(&pdev->dev, "Invalid iomem size. You may " ++ "experience problems.\n"); ++ ++ if (pdev->dev.parent) ++ host = sdhci_alloc_host(pdev->dev.parent, ++ sizeof(struct sdhci_bcm2708_priv)); ++ else ++ host = sdhci_alloc_host(&pdev->dev, ++ sizeof(struct sdhci_bcm2708_priv)); ++ ++ if (IS_ERR(host)) { ++ ret = PTR_ERR(host); ++ goto err; ++ } ++ if (missing_status) { ++ sdhci_bcm2708_ops.missing_status = sdhci_bcm2708_missing_status; ++ } ++ ++ if( spurious_crc_acmd51 ) { ++ sdhci_bcm2708_ops.spurious_crc_acmd51 = sdhci_bcm2708_quirk_spurious_crc_acmd51; ++ } ++ ++ ++ printk("sdhci: %s low-latency mode\n",enable_llm?"Enable":"Disable"); ++ ++ host->hw_name = "BCM2708_Arasan"; ++ host->ops = &sdhci_bcm2708_ops; ++ host->irq = platform_get_irq(pdev, 0); ++ host->second_irq = 0; ++ ++ host->quirks = SDHCI_QUIRK_BROKEN_CARD_DETECTION | ++ SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK | ++ SDHCI_QUIRK_BROKEN_TIMEOUT_VAL | ++ SDHCI_QUIRK_MISSING_CAPS | ++ SDHCI_QUIRK_NO_HISPD_BIT | ++ (sync_after_dma ? 0:SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12); ++ ++ ++#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA ++ host->flags = SDHCI_USE_PLATDMA; ++#endif ++ ++ if (!request_mem_region(iomem->start, resource_size(iomem), ++ mmc_hostname(host->mmc))) { ++ dev_err(&pdev->dev, "cannot request region\n"); ++ ret = -EBUSY; ++ goto err_request; ++ } ++ ++ host->ioaddr = ioremap(iomem->start, resource_size(iomem)); ++ if (!host->ioaddr) { ++ dev_err(&pdev->dev, "failed to remap registers\n"); ++ ret = -ENOMEM; ++ goto err_remap; ++ } ++ ++ host_priv = SDHCI_HOST_PRIV(host); ++ ++#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA ++ host_priv->dma_wanted = 0; ++#ifdef CHECK_DMA_USE ++ host_priv->dmas_pending = 0; ++ host_priv->when_started = 0; ++ host_priv->when_reset = 0; ++ host_priv->when_stopped = 0; ++#endif ++ host_priv->sg_ix = 0; ++ host_priv->sg_done = 0; ++ host_priv->complete = NULL; ++ host_priv->dma_waits = SDHCI_BCM_DMA_WAITS; ++ ++ host_priv->cb_base = dma_alloc_writecombine(&pdev->dev, SZ_4K, ++ &host_priv->cb_handle, ++ GFP_KERNEL); ++ if (!host_priv->cb_base) { ++ dev_err(&pdev->dev, "cannot allocate DMA CBs\n"); ++ ret = -ENOMEM; ++ goto err_alloc_cb; ++ } ++ ++ ret = bcm_dma_chan_alloc(BCM_DMA_FEATURE_FAST, ++ &host_priv->dma_chan_base, ++ &host_priv->dma_irq); ++ if (ret < 0) { ++ dev_err(&pdev->dev, "couldn't allocate a DMA channel\n"); ++ goto err_add_dma; ++ } ++ host_priv->dma_chan = ret; ++ ++ ret = request_irq(host_priv->dma_irq, sdhci_bcm2708_dma_irq,0,//IRQF_SHARED, ++ DRIVER_NAME " (dma)", host); ++ if (ret) { ++ dev_err(&pdev->dev, "cannot set DMA IRQ\n"); ++ goto err_add_dma_irq; ++ } ++ host->second_irq = host_priv->dma_irq; ++ DBG("DMA CBs %p handle %08X DMA%d %p DMA IRQ %d\n", ++ host_priv->cb_base, (unsigned)host_priv->cb_handle, ++ host_priv->dma_chan, host_priv->dma_chan_base, ++ host_priv->dma_irq); ++ ++ if (allow_highspeed) ++ host->mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED; ++ ++ /* single block writes cause data loss with some SD cards! */ ++ host->mmc->caps2 |= MMC_CAP2_FORCE_MULTIBLOCK; ++#endif ++ ++ ret = sdhci_add_host(host); ++ if (ret) ++ goto err_add_host; ++ ++ platform_set_drvdata(pdev, host); ++ ret = device_create_file(&pdev->dev, &dev_attr_use_dma); ++ ret = device_create_file(&pdev->dev, &dev_attr_dma_wait); ++ ret = device_create_file(&pdev->dev, &dev_attr_status); ++ ++#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA ++ /* enable extension fifo for paced DMA transfers */ ++ sdhci_bcm2708_writel(host, 1, REG_EXRDFIFO_EN); ++ sdhci_bcm2708_writel(host, 4, REG_EXRDFIFO_CFG); ++#endif ++ ++ printk(KERN_INFO "%s: BCM2708 SDHC host at 0x%08llx DMA %d IRQ %d\n", ++ mmc_hostname(host->mmc), (unsigned long long)iomem->start, ++ host_priv->dma_chan, host_priv->dma_irq); ++ ++ return 0; ++ ++err_add_host: ++#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA ++ free_irq(host_priv->dma_irq, host); ++err_add_dma_irq: ++ bcm_dma_chan_free(host_priv->dma_chan); ++err_add_dma: ++ dma_free_writecombine(&pdev->dev, SZ_4K, host_priv->cb_base, ++ host_priv->cb_handle); ++err_alloc_cb: ++#endif ++ iounmap(host->ioaddr); ++err_remap: ++ release_mem_region(iomem->start, resource_size(iomem)); ++err_request: ++ sdhci_free_host(host); ++err: ++ dev_err(&pdev->dev, "probe failed, err %d\n", ret); ++ return ret; ++} ++ ++static int sdhci_bcm2708_remove(struct platform_device *pdev) ++{ ++ struct sdhci_host *host = platform_get_drvdata(pdev); ++ struct resource *iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host); ++ int dead; ++ u32 scratch; ++ ++ dead = 0; ++ scratch = sdhci_bcm2708_readl(host, SDHCI_INT_STATUS); ++ if (scratch == (u32)-1) ++ dead = 1; ++ ++ device_remove_file(&pdev->dev, &dev_attr_status); ++ device_remove_file(&pdev->dev, &dev_attr_dma_wait); ++ device_remove_file(&pdev->dev, &dev_attr_use_dma); ++ ++#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA ++ free_irq(host_priv->dma_irq, host); ++ dma_free_writecombine(&pdev->dev, SZ_4K, host_priv->cb_base, ++ host_priv->cb_handle); ++#endif ++ sdhci_remove_host(host, dead); ++ iounmap(host->ioaddr); ++ release_mem_region(iomem->start, resource_size(iomem)); ++ sdhci_free_host(host); ++ platform_set_drvdata(pdev, NULL); ++ ++ return 0; ++} ++ ++static struct platform_driver sdhci_bcm2708_driver = { ++ .driver = { ++ .name = DRIVER_NAME, ++ .owner = THIS_MODULE, ++ }, ++ .probe = sdhci_bcm2708_probe, ++ .remove = sdhci_bcm2708_remove, ++ ++#ifdef CONFIG_PM ++ .suspend = sdhci_bcm2708_suspend, ++ .resume = sdhci_bcm2708_resume, ++#endif ++ ++}; ++ ++/*****************************************************************************\ ++ * * ++ * Driver init/exit * ++ * * ++\*****************************************************************************/ ++ ++static int __init sdhci_drv_init(void) ++{ ++ return platform_driver_register(&sdhci_bcm2708_driver); ++} ++ ++static void __exit sdhci_drv_exit(void) ++{ ++ platform_driver_unregister(&sdhci_bcm2708_driver); ++} ++ ++module_init(sdhci_drv_init); ++module_exit(sdhci_drv_exit); ++ ++module_param(allow_highspeed, bool, 0444); ++module_param(emmc_clock_freq, int, 0444); ++module_param(sync_after_dma, bool, 0444); ++module_param(missing_status, bool, 0444); ++module_param(spurious_crc_acmd51, bool, 0444); ++module_param(enable_llm, bool, 0444); ++module_param(cycle_delay, int, 0444); ++module_param(extra_messages, bool, 0444); ++ ++MODULE_DESCRIPTION("Secure Digital Host Controller Interface platform driver"); ++MODULE_AUTHOR("Broadcom <info@broadcom.com>"); ++MODULE_LICENSE("GPL v2"); ++MODULE_ALIAS("platform:"DRIVER_NAME); ++ ++MODULE_PARM_DESC(allow_highspeed, "Allow high speed transfers modes"); ++MODULE_PARM_DESC(emmc_clock_freq, "Specify the speed of emmc clock"); ++MODULE_PARM_DESC(sync_after_dma, "Block in driver until dma complete"); ++MODULE_PARM_DESC(missing_status, "Use the missing status quirk"); ++MODULE_PARM_DESC(spurious_crc_acmd51, "Use the spurious crc quirk for reading SCR (ACMD51)"); ++MODULE_PARM_DESC(enable_llm, "Enable low-latency mode"); ++MODULE_PARM_DESC(extra_messages, "Enable more sdcard warning messages"); ++ ++ +diff -urwN linux-3.10/drivers/mmc/host/sdhci.c linux-rpi-3.10.y/drivers/mmc/host/sdhci.c +--- linux-3.10/drivers/mmc/host/sdhci.c 2013-06-30 23:13:29.000000000 +0100 ++++ linux-rpi-3.10.y/drivers/mmc/host/sdhci.c 2013-07-06 15:25:50.000000000 +0100 +@@ -28,6 +28,7 @@ + #include <linux/mmc/mmc.h> + #include <linux/mmc/host.h> + #include <linux/mmc/card.h> ++#include <linux/mmc/sd.h> + #include <linux/mmc/slot-gpio.h> + + #include "sdhci.h" +@@ -123,6 +124,91 @@ + * Low level functions * + * * + \*****************************************************************************/ ++extern bool enable_llm; ++static int sdhci_locked=0; ++void sdhci_spin_lock(struct sdhci_host *host) ++{ ++ spin_lock(&host->lock); ++#ifdef CONFIG_PREEMPT ++ if(enable_llm) ++ { ++ disable_irq_nosync(host->irq); ++ if(host->second_irq) ++ disable_irq_nosync(host->second_irq); ++ local_irq_enable(); ++ } ++#endif ++} ++ ++void sdhci_spin_unlock(struct sdhci_host *host) ++{ ++#ifdef CONFIG_PREEMPT ++ if(enable_llm) ++ { ++ local_irq_disable(); ++ if(host->second_irq) ++ enable_irq(host->second_irq); ++ enable_irq(host->irq); ++ } ++#endif ++ spin_unlock(&host->lock); ++} ++ ++void sdhci_spin_lock_irqsave(struct sdhci_host *host,unsigned long *flags) ++{ ++#ifdef CONFIG_PREEMPT ++ if(enable_llm) ++ { ++ while(sdhci_locked) ++ { ++ preempt_schedule(); ++ } ++ spin_lock_irqsave(&host->lock,*flags); ++ disable_irq(host->irq); ++ if(host->second_irq) ++ disable_irq(host->second_irq); ++ local_irq_enable(); ++ } ++ else ++#endif ++ spin_lock_irqsave(&host->lock,*flags); ++} ++ ++void sdhci_spin_unlock_irqrestore(struct sdhci_host *host,unsigned long flags) ++{ ++#ifdef CONFIG_PREEMPT ++ if(enable_llm) ++ { ++ local_irq_disable(); ++ if(host->second_irq) ++ enable_irq(host->second_irq); ++ enable_irq(host->irq); ++ } ++#endif ++ spin_unlock_irqrestore(&host->lock,flags); ++} ++ ++static void sdhci_spin_enable_schedule(struct sdhci_host *host) ++{ ++#ifdef CONFIG_PREEMPT ++ if(enable_llm) ++ { ++ sdhci_locked = 1; ++ preempt_enable(); ++ } ++#endif ++} ++ ++static void sdhci_spin_disable_schedule(struct sdhci_host *host) ++{ ++#ifdef CONFIG_PREEMPT ++ if(enable_llm) ++ { ++ preempt_disable(); ++ sdhci_locked = 0; ++ } ++#endif ++} + + static void sdhci_clear_set_irqs(struct sdhci_host *host, u32 clear, u32 set) + { +@@ -288,7 +374,7 @@ + struct sdhci_host *host = container_of(led, struct sdhci_host, led); + unsigned long flags; + +- spin_lock_irqsave(&host->lock, flags); ++ sdhci_spin_lock_irqsave(host, &flags); + + if (host->runtime_suspended) + goto out; +@@ -298,7 +384,7 @@ + else + sdhci_activate_led(host); + out: +- spin_unlock_irqrestore(&host->lock, flags); ++ sdhci_spin_unlock_irqrestore(host, flags); + } + #endif + +@@ -315,7 +401,7 @@ + u32 uninitialized_var(scratch); + u8 *buf; + +- DBG("PIO reading\n"); ++ DBG("PIO reading %db\n", host->data->blksz); + + blksize = host->data->blksz; + chunk = 0; +@@ -360,7 +446,7 @@ + u32 scratch; + u8 *buf; + +- DBG("PIO writing\n"); ++ DBG("PIO writing %db\n", host->data->blksz); + + blksize = host->data->blksz; + chunk = 0; +@@ -399,19 +485,28 @@ + local_irq_restore(flags); + } + +-static void sdhci_transfer_pio(struct sdhci_host *host) ++static void sdhci_transfer_pio(struct sdhci_host *host, u32 intstate) + { + u32 mask; ++ u32 state = 0; ++ u32 intmask; ++ int available; + + BUG_ON(!host->data); + + if (host->blocks == 0) + return; + +- if (host->data->flags & MMC_DATA_READ) ++ if (host->data->flags & MMC_DATA_READ) { + mask = SDHCI_DATA_AVAILABLE; +- else ++ intmask = SDHCI_INT_DATA_AVAIL; ++ } else { + mask = SDHCI_SPACE_AVAILABLE; ++ intmask = SDHCI_INT_SPACE_AVAIL; ++ } ++ ++ /* initially we can see whether we can procede using intstate */ ++ available = (intstate & intmask); + + /* + * Some controllers (JMicron JMB38x) mess up the buffer bits +@@ -422,7 +517,7 @@ + (host->data->blocks == 1)) + mask = ~0; + +- while (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask) { ++ while (available) { + if (host->quirks & SDHCI_QUIRK_PIO_NEEDS_DELAY) + udelay(100); + +@@ -434,9 +529,11 @@ + host->blocks--; + if (host->blocks == 0) + break; ++ state = sdhci_readl(host, SDHCI_PRESENT_STATE); ++ available = state & mask; + } + +- DBG("PIO transfer complete.\n"); ++ DBG("PIO transfer complete - %d blocks left.\n", host->blocks); + } + + static char *sdhci_kmap_atomic(struct scatterlist *sg, unsigned long *flags) +@@ -709,7 +806,9 @@ + u32 pio_irqs = SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL; + u32 dma_irqs = SDHCI_INT_DMA_END | SDHCI_INT_ADMA_ERROR; + +- if (host->flags & SDHCI_REQ_USE_DMA) ++ /* platform DMA will begin on receipt of PIO irqs */ ++ if ((host->flags & SDHCI_REQ_USE_DMA) && ++ !(host->flags & SDHCI_USE_PLATDMA)) + sdhci_clear_set_irqs(host, pio_irqs, dma_irqs); + else + sdhci_clear_set_irqs(host, dma_irqs, pio_irqs); +@@ -741,44 +840,25 @@ + host->data_early = 0; + host->data->bytes_xfered = 0; + +- if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) ++ if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA | SDHCI_USE_PLATDMA)) + host->flags |= SDHCI_REQ_USE_DMA; + + /* + * FIXME: This doesn't account for merging when mapping the + * scatterlist. + */ +- if (host->flags & SDHCI_REQ_USE_DMA) { +- int broken, i; +- struct scatterlist *sg; +- +- broken = 0; +- if (host->flags & SDHCI_USE_ADMA) { +- if (host->quirks & SDHCI_QUIRK_32BIT_ADMA_SIZE) +- broken = 1; +- } else { +- if (host->quirks & SDHCI_QUIRK_32BIT_DMA_SIZE) +- broken = 1; +- } +- +- if (unlikely(broken)) { +- for_each_sg(data->sg, sg, data->sg_len, i) { +- if (sg->length & 0x3) { +- DBG("Reverting to PIO because of " +- "transfer size (%d)\n", +- sg->length); +- host->flags &= ~SDHCI_REQ_USE_DMA; +- break; +- } +- } +- } +- } + + /* + * The assumption here being that alignment is the same after + * translation to device address space. + */ +- if (host->flags & SDHCI_REQ_USE_DMA) { ++ if ((host->flags & (SDHCI_REQ_USE_DMA | SDHCI_USE_PLATDMA)) == ++ (SDHCI_REQ_USE_DMA | SDHCI_USE_PLATDMA)) { ++ ++ if (! sdhci_platdma_dmaable(host, data)) ++ host->flags &= ~SDHCI_REQ_USE_DMA; ++ ++ } else if (host->flags & SDHCI_REQ_USE_DMA) { + int broken, i; + struct scatterlist *sg; + +@@ -837,7 +917,8 @@ + */ + WARN_ON(1); + host->flags &= ~SDHCI_REQ_USE_DMA; +- } else { ++ } else ++ if (!(host->flags & SDHCI_USE_PLATDMA)) { + WARN_ON(sg_cnt != 1); + sdhci_writel(host, sg_dma_address(data->sg), + SDHCI_DMA_ADDRESS); +@@ -853,11 +934,13 @@ + if (host->version >= SDHCI_SPEC_200) { + ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL); + ctrl &= ~SDHCI_CTRL_DMA_MASK; ++ if (! (host->flags & SDHCI_USE_PLATDMA)) { + if ((host->flags & SDHCI_REQ_USE_DMA) && + (host->flags & SDHCI_USE_ADMA)) + ctrl |= SDHCI_CTRL_ADMA32; + else + ctrl |= SDHCI_CTRL_SDMA; ++ } + sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL); + } + +@@ -909,7 +992,8 @@ + + if (data->flags & MMC_DATA_READ) + mode |= SDHCI_TRNS_READ; +- if (host->flags & SDHCI_REQ_USE_DMA) ++ if ((host->flags & SDHCI_REQ_USE_DMA) && ++ !(host->flags & SDHCI_USE_PLATDMA)) + mode |= SDHCI_TRNS_DMA; + + sdhci_writew(host, mode, SDHCI_TRANSFER_MODE); +@@ -925,13 +1009,16 @@ + host->data = NULL; + + if (host->flags & SDHCI_REQ_USE_DMA) { +- if (host->flags & SDHCI_USE_ADMA) +- sdhci_adma_table_post(host, data); +- else { ++ /* we may have to abandon an ongoing platform DMA */ ++ if (host->flags & SDHCI_USE_PLATDMA) ++ sdhci_platdma_reset(host, data); ++ ++ if (host->flags & (SDHCI_USE_PLATDMA | SDHCI_USE_SDMA)) { + dma_unmap_sg(mmc_dev(host->mmc), data->sg, + data->sg_len, (data->flags & MMC_DATA_READ) ? + DMA_FROM_DEVICE : DMA_TO_DEVICE); +- } ++ } else if (host->flags & SDHCI_USE_ADMA) ++ sdhci_adma_table_post(host, data); + } + + /* +@@ -984,6 +1071,12 @@ + if ((cmd->data != NULL) || (cmd->flags & MMC_RSP_BUSY)) + mask |= SDHCI_DATA_INHIBIT; + ++ if(host->ops->missing_status && (cmd->opcode == MMC_SEND_STATUS)) { ++ timeout = 5000; // Really obscenely large delay to send the status, due to bug in controller ++ // which might cause the STATUS command to get stuck when a data operation is in flow ++ mask |= SDHCI_DATA_INHIBIT; ++ } ++ + /* We shouldn't wait for data inihibit for stop commands, even + though they might use busy signaling */ + if (host->mrq->data && (cmd == host->mrq->data->stop)) +@@ -999,12 +1092,20 @@ + return; + } + timeout--; ++ sdhci_spin_enable_schedule(host); + mdelay(1); ++ sdhci_spin_disable_schedule(host); + } ++ DBG("send cmd %d - wait 0x%X irq 0x%x\n", cmd->opcode, mask, ++ sdhci_readl(host, SDHCI_INT_STATUS)); + + mod_timer(&host->timer, jiffies + 10 * HZ); + + host->cmd = cmd; ++ if (host->last_cmdop == MMC_APP_CMD) ++ host->last_cmdop = -cmd->opcode; ++ else ++ host->last_cmdop = cmd->opcode; + + sdhci_prepare_data(host, cmd); + +@@ -1220,7 +1321,9 @@ + return; + } + timeout--; ++ sdhci_spin_enable_schedule(host); + mdelay(1); ++ sdhci_spin_disable_schedule(host); + } + + clk |= SDHCI_CLOCK_CARD_EN; +@@ -1316,7 +1419,7 @@ + + sdhci_runtime_pm_get(host); + +- spin_lock_irqsave(&host->lock, flags); ++ sdhci_spin_lock_irqsave(host, &flags); + + WARN_ON(host->mrq != NULL); + +@@ -1374,9 +1477,9 @@ + mmc->card->type == MMC_TYPE_MMC ? + MMC_SEND_TUNING_BLOCK_HS200 : + MMC_SEND_TUNING_BLOCK; +- spin_unlock_irqrestore(&host->lock, flags); ++ sdhci_spin_unlock_irqrestore(host, flags); + sdhci_execute_tuning(mmc, tuning_opcode); +- spin_lock_irqsave(&host->lock, flags); ++ sdhci_spin_lock_irqsave(host, &flags); + + /* Restore original mmc_request structure */ + host->mrq = mrq; +@@ -1390,7 +1493,7 @@ + } + + mmiowb(); +- spin_unlock_irqrestore(&host->lock, flags); ++ sdhci_spin_unlock_irqrestore(host, flags); + } + + static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios) +@@ -1399,10 +1502,10 @@ + int vdd_bit = -1; + u8 ctrl; + +- spin_lock_irqsave(&host->lock, flags); ++ sdhci_spin_lock_irqsave(host, &flags); + + if (host->flags & SDHCI_DEVICE_DEAD) { +- spin_unlock_irqrestore(&host->lock, flags); ++ sdhci_spin_unlock_irqrestore(host, flags); + if (host->vmmc && ios->power_mode == MMC_POWER_OFF) + mmc_regulator_set_ocr(host->mmc, host->vmmc, 0); + return; +@@ -1429,9 +1532,9 @@ + vdd_bit = sdhci_set_power(host, ios->vdd); + + if (host->vmmc && vdd_bit != -1) { +- spin_unlock_irqrestore(&host->lock, flags); ++ sdhci_spin_unlock_irqrestore(host, flags); + mmc_regulator_set_ocr(host->mmc, host->vmmc, vdd_bit); +- spin_lock_irqsave(&host->lock, flags); ++ sdhci_spin_lock_irqsave(host, &flags); + } + + if (host->ops->platform_send_init_74_clocks) +@@ -1470,7 +1573,7 @@ + else + ctrl &= ~SDHCI_CTRL_HISPD; + +- if (host->version >= SDHCI_SPEC_300) { ++ if (host->version >= SDHCI_SPEC_300 && !(host->ops->uhs_broken)) { + u16 clk, ctrl_2; + + /* In case of UHS-I modes, set High Speed Enable */ +@@ -1569,7 +1672,7 @@ + sdhci_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA); + + mmiowb(); +- spin_unlock_irqrestore(&host->lock, flags); ++ sdhci_spin_unlock_irqrestore(host, flags); + } + + static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +@@ -1617,7 +1720,7 @@ + unsigned long flags; + int is_readonly; + +- spin_lock_irqsave(&host->lock, flags); ++ sdhci_spin_lock_irqsave(host, &flags); + + if (host->flags & SDHCI_DEVICE_DEAD) + is_readonly = 0; +@@ -1627,7 +1730,7 @@ + is_readonly = !(sdhci_readl(host, SDHCI_PRESENT_STATE) + & SDHCI_WRITE_PROTECT); + +- spin_unlock_irqrestore(&host->lock, flags); ++ sdhci_spin_unlock_irqrestore(host, flags); + + /* This quirk needs to be replaced by a callback-function later */ + return host->quirks & SDHCI_QUIRK_INVERTED_WRITE_PROTECT ? +@@ -1700,9 +1803,9 @@ + struct sdhci_host *host = mmc_priv(mmc); + unsigned long flags; + +- spin_lock_irqsave(&host->lock, flags); ++ sdhci_spin_lock_irqsave(host, &flags); + sdhci_enable_sdio_irq_nolock(host, enable); +- spin_unlock_irqrestore(&host->lock, flags); ++ sdhci_spin_unlock_irqrestore(host, flags); + } + + static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host, +@@ -2046,7 +2149,7 @@ + struct sdhci_host *host = mmc_priv(mmc); + unsigned long flags; + +- spin_lock_irqsave(&host->lock, flags); ++ sdhci_spin_lock_irqsave(host, &flags); + + /* Check host->mrq first in case we are runtime suspended */ + if (host->mrq && +@@ -2063,7 +2166,7 @@ + tasklet_schedule(&host->finish_tasklet); + } + +- spin_unlock_irqrestore(&host->lock, flags); ++ sdhci_spin_unlock_irqrestore(host, flags); + } + + static const struct mmc_host_ops sdhci_ops = { +@@ -2102,14 +2205,14 @@ + + host = (struct sdhci_host*)param; + +- spin_lock_irqsave(&host->lock, flags); ++ sdhci_spin_lock_irqsave(host, &flags); + + /* + * If this tasklet gets rescheduled while running, it will + * be run again afterwards but without any active request. + */ + if (!host->mrq) { +- spin_unlock_irqrestore(&host->lock, flags); ++ sdhci_spin_unlock_irqrestore(host, flags); + return; + } + +@@ -2147,7 +2250,7 @@ + #endif + + mmiowb(); +- spin_unlock_irqrestore(&host->lock, flags); ++ sdhci_spin_unlock_irqrestore(host, flags); + + mmc_request_done(host->mmc, mrq); + sdhci_runtime_pm_put(host); +@@ -2160,11 +2263,11 @@ + + host = (struct sdhci_host*)data; + +- spin_lock_irqsave(&host->lock, flags); ++ sdhci_spin_lock_irqsave(host, &flags); + + if (host->mrq) { + pr_err("%s: Timeout waiting for hardware " +- "interrupt.\n", mmc_hostname(host->mmc)); ++ "interrupt - cmd%d.\n", mmc_hostname(host->mmc), host->last_cmdop); + sdhci_dumpregs(host); + + if (host->data) { +@@ -2181,7 +2284,7 @@ + } + + mmiowb(); +- spin_unlock_irqrestore(&host->lock, flags); ++ sdhci_spin_unlock_irqrestore(host, flags); + } + + static void sdhci_tuning_timer(unsigned long data) +@@ -2191,11 +2294,11 @@ + + host = (struct sdhci_host *)data; + +- spin_lock_irqsave(&host->lock, flags); ++ sdhci_spin_lock_irqsave(host, &flags); + + host->flags |= SDHCI_NEEDS_RETUNING; + +- spin_unlock_irqrestore(&host->lock, flags); ++ sdhci_spin_unlock_irqrestore(host, flags); + } + + /*****************************************************************************\ +@@ -2209,10 +2312,13 @@ + BUG_ON(intmask == 0); + + if (!host->cmd) { ++ if (!(host->ops->extra_ints)) { + pr_err("%s: Got command interrupt 0x%08x even " + "though no command operation was in progress.\n", + mmc_hostname(host->mmc), (unsigned)intmask); + sdhci_dumpregs(host); ++ } else ++ DBG("cmd irq 0x%08x cmd complete\n", (unsigned)intmask); + return; + } + +@@ -2282,6 +2388,19 @@ + static void sdhci_show_adma_error(struct sdhci_host *host) { } + #endif + ++static void sdhci_data_end(struct sdhci_host *host) ++{ ++ if (host->cmd) { ++ /* ++ * Data managed to finish before the ++ * command completed. Make sure we do ++ * things in the proper order. ++ */ ++ host->data_early = 1; ++ } else ++ sdhci_finish_data(host); ++} ++ + static void sdhci_data_irq(struct sdhci_host *host, u32 intmask) + { + u32 command; +@@ -2311,23 +2430,39 @@ + } + } + ++ if (!(host->ops->extra_ints)) { + pr_err("%s: Got data interrupt 0x%08x even " + "though no data operation was in progress.\n", + mmc_hostname(host->mmc), (unsigned)intmask); + sdhci_dumpregs(host); ++ } else ++ DBG("data irq 0x%08x but no data\n", (unsigned)intmask); + + return; + } + + if (intmask & SDHCI_INT_DATA_TIMEOUT) + host->data->error = -ETIMEDOUT; +- else if (intmask & SDHCI_INT_DATA_END_BIT) ++ else if (intmask & SDHCI_INT_DATA_END_BIT) { ++ DBG("end error in cmd %d\n", host->last_cmdop); ++ if (host->ops->spurious_crc_acmd51 && ++ host->last_cmdop == -SD_APP_SEND_SCR) { ++ DBG("ignoring spurious data_end_bit error\n"); ++ intmask = SDHCI_INT_DATA_AVAIL|SDHCI_INT_DATA_END; ++ } else + host->data->error = -EILSEQ; +- else if ((intmask & SDHCI_INT_DATA_CRC) && ++ } else if ((intmask & SDHCI_INT_DATA_CRC) && + SDHCI_GET_CMD(sdhci_readw(host, SDHCI_COMMAND)) +- != MMC_BUS_TEST_R) ++ != MMC_BUS_TEST_R) { ++ DBG("crc error in cmd %d\n", host->last_cmdop); ++ if (host->ops->spurious_crc_acmd51 && ++ host->last_cmdop == -SD_APP_SEND_SCR) { ++ DBG("ignoring spurious data_crc_bit error\n"); ++ intmask = SDHCI_INT_DATA_AVAIL|SDHCI_INT_DATA_END; ++ } else { + host->data->error = -EILSEQ; +- else if (intmask & SDHCI_INT_ADMA_ERROR) { ++ } ++ } else if (intmask & SDHCI_INT_ADMA_ERROR) { + pr_err("%s: ADMA error\n", mmc_hostname(host->mmc)); + sdhci_show_adma_error(host); + host->data->error = -EIO; +@@ -2335,11 +2470,18 @@ + host->ops->adma_workaround(host, intmask); + } + +- if (host->data->error) ++ if (host->data->error) { ++ DBG("finish request early on error %d\n", host->data->error); + sdhci_finish_data(host); +- else { +- if (intmask & (SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL)) +- sdhci_transfer_pio(host); ++ } else { ++ if (intmask & (SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL)) { ++ if (host->flags & SDHCI_REQ_USE_DMA) { ++ /* possible only in PLATDMA mode */ ++ sdhci_platdma_avail(host, &intmask, ++ &sdhci_data_end); ++ } else ++ sdhci_transfer_pio(host, intmask); ++ } + + /* + * We currently don't do anything fancy with DMA +@@ -2368,18 +2510,8 @@ + sdhci_writel(host, dmanow, SDHCI_DMA_ADDRESS); + } + +- if (intmask & SDHCI_INT_DATA_END) { +- if (host->cmd) { +- /* +- * Data managed to finish before the +- * command completed. Make sure we do +- * things in the proper order. +- */ +- host->data_early = 1; +- } else { +- sdhci_finish_data(host); +- } +- } ++ if (intmask & SDHCI_INT_DATA_END) ++ sdhci_data_end(host); + } + } + +@@ -2390,10 +2522,10 @@ + u32 intmask, unexpected = 0; + int cardint = 0, max_loops = 16; + +- spin_lock(&host->lock); ++ sdhci_spin_lock(host); + + if (host->runtime_suspended) { +- spin_unlock(&host->lock); ++ sdhci_spin_unlock(host); + pr_warning("%s: got irq while runtime suspended\n", + mmc_hostname(host->mmc)); + return IRQ_HANDLED; +@@ -2435,6 +2567,22 @@ + tasklet_schedule(&host->card_tasklet); + } + ++ if (intmask & SDHCI_INT_ERROR_MASK & ~SDHCI_INT_ERROR) ++ DBG("controller reports error 0x%x -" ++ "%s%s%s%s%s%s%s%s%s%s", ++ intmask, ++ intmask & SDHCI_INT_TIMEOUT? " timeout": "", ++ intmask & SDHCI_INT_CRC ? " crc": "", ++ intmask & SDHCI_INT_END_BIT? " endbit": "", ++ intmask & SDHCI_INT_INDEX? " index": "", ++ intmask & SDHCI_INT_DATA_TIMEOUT? " data_timeout": "", ++ intmask & SDHCI_INT_DATA_CRC? " data_crc": "", ++ intmask & SDHCI_INT_DATA_END_BIT? " data_endbit": "", ++ intmask & SDHCI_INT_BUS_POWER? " buspower": "", ++ intmask & SDHCI_INT_ACMD12ERR? " acmd12": "", ++ intmask & SDHCI_INT_ADMA_ERROR? " adma": "" ++ ); ++ + if (intmask & SDHCI_INT_CMD_MASK) { + sdhci_writel(host, intmask & SDHCI_INT_CMD_MASK, + SDHCI_INT_STATUS); +@@ -2449,7 +2597,13 @@ + + intmask &= ~(SDHCI_INT_CMD_MASK | SDHCI_INT_DATA_MASK); + +- intmask &= ~SDHCI_INT_ERROR; ++ if (intmask & SDHCI_INT_ERROR_MASK) { ++ /* collect any uncovered errors */ ++ sdhci_writel(host, intmask & SDHCI_INT_ERROR_MASK, ++ SDHCI_INT_STATUS); ++ } ++ ++ intmask &= ~SDHCI_INT_ERROR_MASK; + + if (intmask & SDHCI_INT_BUS_POWER) { + pr_err("%s: Card is consuming too much power!\n", +@@ -2475,7 +2629,7 @@ + if (intmask && --max_loops) + goto again; + out: +- spin_unlock(&host->lock); ++ sdhci_spin_unlock(host); + + if (unexpected) { + pr_err("%s: Unexpected interrupt 0x%08x.\n", +@@ -2569,7 +2723,8 @@ + { + int ret; + +- if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) { ++ if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA | ++ SDHCI_USE_PLATDMA)) { + if (host->ops->enable_dma) + host->ops->enable_dma(host); + } +@@ -2636,15 +2791,15 @@ + host->flags &= ~SDHCI_NEEDS_RETUNING; + } + +- spin_lock_irqsave(&host->lock, flags); ++ sdhci_spin_lock_irqsave(host, &flags); + sdhci_mask_irqs(host, SDHCI_INT_ALL_MASK); +- spin_unlock_irqrestore(&host->lock, flags); ++ sdhci_spin_unlock_irqrestore(host, flags); + + synchronize_irq(host->irq); + +- spin_lock_irqsave(&host->lock, flags); ++ sdhci_spin_lock_irqsave(host, &flags); + host->runtime_suspended = true; +- spin_unlock_irqrestore(&host->lock, flags); ++ sdhci_spin_unlock_irqrestore(host, flags); + + return ret; + } +@@ -2670,16 +2825,16 @@ + sdhci_do_start_signal_voltage_switch(host, &host->mmc->ios); + if ((host_flags & SDHCI_PV_ENABLED) && + !(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN)) { +- spin_lock_irqsave(&host->lock, flags); ++ sdhci_spin_lock_irqsave(host, &flags); + sdhci_enable_preset_value(host, true); +- spin_unlock_irqrestore(&host->lock, flags); ++ sdhci_spin_unlock_irqrestore(host, flags); + } + + /* Set the re-tuning expiration flag */ + if (host->flags & SDHCI_USING_RETUNING_TIMER) + host->flags |= SDHCI_NEEDS_RETUNING; + +- spin_lock_irqsave(&host->lock, flags); ++ sdhci_spin_lock_irqsave(host, &flags); + + host->runtime_suspended = false; + +@@ -2690,7 +2845,7 @@ + /* Enable Card Detection */ + sdhci_enable_card_detection(host); + +- spin_unlock_irqrestore(&host->lock, flags); ++ sdhci_spin_unlock_irqrestore(host, flags); + + return ret; + } +@@ -2785,14 +2940,16 @@ + host->flags &= ~SDHCI_USE_ADMA; + } + +- if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) { ++ if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA | ++ SDHCI_USE_PLATDMA)) { + if (host->ops->enable_dma) { + if (host->ops->enable_dma(host)) { + pr_warning("%s: No suitable DMA " + "available. Falling back to PIO.\n", + mmc_hostname(mmc)); + host->flags &= +- ~(SDHCI_USE_SDMA | SDHCI_USE_ADMA); ++ ~(SDHCI_USE_SDMA | SDHCI_USE_ADMA | ++ SDHCI_USE_PLATDMA); + } + } + } +@@ -3080,6 +3237,12 @@ + SDHCI_MAX_CURRENT_MULTIPLIER; + } + ++ if(host->ops->voltage_broken) { ++ ocr_avail |= MMC_VDD_32_33 | MMC_VDD_33_34; ++ // Cannot support UHS modes if we are stuck at 3.3V; ++ mmc->caps &= ~(MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25 | MMC_CAP_UHS_SDR104 | MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_DDR50); ++ } ++ + mmc->ocr_avail = ocr_avail; + mmc->ocr_avail_sdio = ocr_avail; + if (host->ocr_avail_sdio) +@@ -3174,7 +3337,7 @@ + host->tuning_timer.function = sdhci_tuning_timer; + } + +- ret = request_irq(host->irq, sdhci_irq, IRQF_SHARED, ++ ret = request_irq(host->irq, sdhci_irq, 0,//IRQF_SHARED, + mmc_hostname(mmc), host); + if (ret) { + pr_err("%s: Failed to request IRQ %d: %d\n", +@@ -3210,6 +3373,7 @@ + + pr_info("%s: SDHCI controller on %s [%s] using %s\n", + mmc_hostname(mmc), host->hw_name, dev_name(mmc_dev(mmc)), ++ (host->flags & SDHCI_USE_PLATDMA) ? "platform's DMA" : + (host->flags & SDHCI_USE_ADMA) ? "ADMA" : + (host->flags & SDHCI_USE_SDMA) ? "DMA" : "PIO"); + +@@ -3237,7 +3401,7 @@ + unsigned long flags; + + if (dead) { +- spin_lock_irqsave(&host->lock, flags); ++ sdhci_spin_lock_irqsave(host, &flags); + + host->flags |= SDHCI_DEVICE_DEAD; + +@@ -3249,7 +3413,7 @@ + tasklet_schedule(&host->finish_tasklet); + } + +- spin_unlock_irqrestore(&host->lock, flags); ++ sdhci_spin_unlock_irqrestore(host, flags); + } + + sdhci_disable_card_detection(host); +diff -urwN linux-3.10/drivers/mmc/host/sdhci.h linux-rpi-3.10.y/drivers/mmc/host/sdhci.h +--- linux-3.10/drivers/mmc/host/sdhci.h 2013-06-30 23:13:29.000000000 +0100 ++++ linux-rpi-3.10.y/drivers/mmc/host/sdhci.h 2013-07-06 15:25:50.000000000 +0100 +@@ -289,6 +289,20 @@ + void (*platform_reset_enter)(struct sdhci_host *host, u8 mask); + void (*platform_reset_exit)(struct sdhci_host *host, u8 mask); + int (*set_uhs_signaling)(struct sdhci_host *host, unsigned int uhs); ++ ++ int (*pdma_able)(struct sdhci_host *host, ++ struct mmc_data *data); ++ void (*pdma_avail)(struct sdhci_host *host, ++ unsigned int *ref_intmask, ++ void(*complete)(struct sdhci_host *)); ++ void (*pdma_reset)(struct sdhci_host *host, ++ struct mmc_data *data); ++ unsigned int (*extra_ints)(struct sdhci_host *host); ++ unsigned int (*spurious_crc_acmd51)(struct sdhci_host *host); ++ unsigned int (*voltage_broken)(struct sdhci_host *host); ++ unsigned int (*uhs_broken)(struct sdhci_host *host); ++ unsigned int (*missing_status)(struct sdhci_host *host); ++ + void (*hw_reset)(struct sdhci_host *host); + void (*platform_suspend)(struct sdhci_host *host); + void (*platform_resume)(struct sdhci_host *host); +@@ -399,9 +413,38 @@ + extern void sdhci_enable_irq_wakeups(struct sdhci_host *host); + #endif + ++static inline int /*bool*/ ++sdhci_platdma_dmaable(struct sdhci_host *host, struct mmc_data *data) ++{ ++ if (host->ops->pdma_able) ++ return host->ops->pdma_able(host, data); ++ else ++ return 1; ++} ++static inline void ++sdhci_platdma_avail(struct sdhci_host *host, unsigned int *ref_intmask, ++ void(*completion_callback)(struct sdhci_host *)) ++{ ++ if (host->ops->pdma_avail) ++ host->ops->pdma_avail(host, ref_intmask, completion_callback); ++} ++ ++static inline void ++sdhci_platdma_reset(struct sdhci_host *host, struct mmc_data *data) ++{ ++ if (host->ops->pdma_reset) ++ host->ops->pdma_reset(host, data); ++} ++ + #ifdef CONFIG_PM_RUNTIME + extern int sdhci_runtime_suspend_host(struct sdhci_host *host); + extern int sdhci_runtime_resume_host(struct sdhci_host *host); + #endif + ++extern void sdhci_spin_lock_irqsave(struct sdhci_host *host,unsigned long *flags); ++extern void sdhci_spin_unlock_irqrestore(struct sdhci_host *host,unsigned long flags); ++extern void sdhci_spin_lock(struct sdhci_host *host); ++extern void sdhci_spin_unlock(struct sdhci_host *host); ++ ++ + #endif /* __SDHCI_HW_H */ +diff -urN linux-3.10/include/linux/mmc/host.h linux-rpi-3.10.y/include/linux/mmc/host.h +--- linux-3.10/include/linux/mmc/host.h 2013-06-30 23:13:29.000000000 +0100 ++++ linux-rpi-3.10.y/include/linux/mmc/host.h 2013-07-06 15:25:50.000000000 +0100 +@@ -281,6 +281,7 @@ + #define MMC_CAP2_PACKED_CMD (MMC_CAP2_PACKED_RD | \ + MMC_CAP2_PACKED_WR) + #define MMC_CAP2_NO_PRESCAN_POWERUP (1 << 14) /* Don't power up before scan */ ++#define MMC_CAP2_FORCE_MULTIBLOCK (1 << 31) /* Always use multiblock transfers */ + + mmc_pm_flag_t pm_caps; /* supported pm features */ + +diff -urN linux-3.10/include/linux/mmc/sdhci.h linux-rpi-3.10.y/include/linux/mmc/sdhci.h +--- linux-3.10/include/linux/mmc/sdhci.h 2013-06-30 23:13:29.000000000 +0100 ++++ linux-rpi-3.10.y/include/linux/mmc/sdhci.h 2013-07-06 15:25:50.000000000 +0100 +@@ -97,6 +97,7 @@ + #define SDHCI_QUIRK2_PRESET_VALUE_BROKEN (1<<3) + + int irq; /* Device IRQ */ ++ int second_irq; /* Additional IRQ to disable/enable in low-latency mode */ + void __iomem *ioaddr; /* Mapped address */ + + const struct sdhci_ops *ops; /* Low level hw interface */ +@@ -128,6 +129,7 @@ + #define SDHCI_SDIO_IRQ_ENABLED (1<<9) /* SDIO irq enabled */ + #define SDHCI_HS200_NEEDS_TUNING (1<<10) /* HS200 needs tuning */ + #define SDHCI_USING_RETUNING_TIMER (1<<11) /* Host is using a retuning timer for the card */ ++#define SDHCI_USE_PLATDMA (1<<12) /* Host uses 3rd party DMA */ + + unsigned int version; /* SDHCI spec. version */ + +@@ -142,6 +144,7 @@ + + struct mmc_request *mrq; /* Current request */ + struct mmc_command *cmd; /* Current command */ ++ int last_cmdop; /* Opcode of last cmd sent */ + struct mmc_data *data; /* Current data request */ + unsigned int data_early:1; /* Data finished before cmd */ + |