diff options
author | John Crispin <john@openwrt.org> | 2016-02-25 10:14:05 +0000 |
---|---|---|
committer | John Crispin <john@openwrt.org> | 2016-02-25 10:14:05 +0000 |
commit | 0834f9f07631a8857a96614e37cb21e1dc84ffb4 (patch) | |
tree | c62e777de69d8397ed7870991bc46d5648a20046 /target/linux/brcm2708/patches-4.1/0001-Main-bcm2708-bcm2709-linux-port.patch | |
parent | b3dc9566a46efa67951ff6ae28e4397da9db92af (diff) | |
download | master-31e0f0ae-0834f9f07631a8857a96614e37cb21e1dc84ffb4.tar.gz master-31e0f0ae-0834f9f07631a8857a96614e37cb21e1dc84ffb4.tar.bz2 master-31e0f0ae-0834f9f07631a8857a96614e37cb21e1dc84ffb4.zip |
brcm2708: remove linux 4.1 support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 48766
Diffstat (limited to 'target/linux/brcm2708/patches-4.1/0001-Main-bcm2708-bcm2709-linux-port.patch')
-rw-r--r-- | target/linux/brcm2708/patches-4.1/0001-Main-bcm2708-bcm2709-linux-port.patch | 6829 |
1 files changed, 0 insertions, 6829 deletions
diff --git a/target/linux/brcm2708/patches-4.1/0001-Main-bcm2708-bcm2709-linux-port.patch b/target/linux/brcm2708/patches-4.1/0001-Main-bcm2708-bcm2709-linux-port.patch deleted file mode 100644 index 0981a06c04..0000000000 --- a/target/linux/brcm2708/patches-4.1/0001-Main-bcm2708-bcm2709-linux-port.patch +++ /dev/null @@ -1,6829 +0,0 @@ -From 9d6e36d79fe6515b1392ad1a4e4d4aca72bc770e Mon Sep 17 00:00:00 2001 -From: popcornmix <popcornmix@gmail.com> -Date: Sun, 12 May 2013 12:24:19 +0100 -Subject: [PATCH 001/222] Main bcm2708/bcm2709 linux port -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: popcornmix <popcornmix@gmail.com> -Signed-off-by: Noralf Trønnes <noralf@tronnes.org> ---- - arch/arm/Kconfig | 39 ++ - arch/arm/Kconfig.debug | 8 + - arch/arm/Makefile | 2 + - arch/arm/kernel/head.S | 8 + - arch/arm/kernel/process.c | 10 + - arch/arm/mach-bcm2708/Kconfig | 30 + - arch/arm/mach-bcm2708/Makefile | 5 + - arch/arm/mach-bcm2708/Makefile.boot | 3 + - arch/arm/mach-bcm2708/armctrl.c | 304 +++++++++ - arch/arm/mach-bcm2708/armctrl.h | 27 + - arch/arm/mach-bcm2708/bcm2708.c | 622 ++++++++++++++++++ - arch/arm/mach-bcm2708/bcm2708.h | 49 ++ - arch/arm/mach-bcm2708/include/mach/arm_control.h | 419 ++++++++++++ - arch/arm/mach-bcm2708/include/mach/clkdev.h | 7 + - arch/arm/mach-bcm2708/include/mach/debug-macro.S | 22 + - arch/arm/mach-bcm2708/include/mach/entry-macro.S | 69 ++ - arch/arm/mach-bcm2708/include/mach/frc.h | 38 ++ - arch/arm/mach-bcm2708/include/mach/hardware.h | 28 + - arch/arm/mach-bcm2708/include/mach/io.h | 27 + - arch/arm/mach-bcm2708/include/mach/irqs.h | 196 ++++++ - arch/arm/mach-bcm2708/include/mach/memory.h | 57 ++ - arch/arm/mach-bcm2708/include/mach/platform.h | 228 +++++++ - arch/arm/mach-bcm2708/include/mach/system.h | 38 ++ - arch/arm/mach-bcm2708/include/mach/timex.h | 23 + - arch/arm/mach-bcm2708/include/mach/uncompress.h | 84 +++ - arch/arm/mach-bcm2708/include/mach/vmalloc.h | 20 + - arch/arm/mach-bcm2709/Kconfig | 42 ++ - arch/arm/mach-bcm2709/Makefile | 6 + - arch/arm/mach-bcm2709/Makefile.boot | 3 + - arch/arm/mach-bcm2709/armctrl.c | 361 ++++++++++ - arch/arm/mach-bcm2709/armctrl.h | 27 + - arch/arm/mach-bcm2709/bcm2708_gpio.c | 426 ++++++++++++ - arch/arm/mach-bcm2709/bcm2709.c | 801 +++++++++++++++++++++++ - arch/arm/mach-bcm2709/bcm2709.h | 49 ++ - arch/arm/mach-bcm2709/delay.S | 21 + - arch/arm/mach-bcm2709/include/mach/arm_control.h | 493 ++++++++++++++ - arch/arm/mach-bcm2709/include/mach/barriers.h | 3 + - arch/arm/mach-bcm2709/include/mach/clkdev.h | 7 + - arch/arm/mach-bcm2709/include/mach/debug-macro.S | 22 + - arch/arm/mach-bcm2709/include/mach/entry-macro.S | 123 ++++ - arch/arm/mach-bcm2709/include/mach/frc.h | 38 ++ - arch/arm/mach-bcm2709/include/mach/gpio.h | 17 + - arch/arm/mach-bcm2709/include/mach/hardware.h | 28 + - arch/arm/mach-bcm2709/include/mach/io.h | 27 + - arch/arm/mach-bcm2709/include/mach/irqs.h | 225 +++++++ - arch/arm/mach-bcm2709/include/mach/memory.h | 57 ++ - arch/arm/mach-bcm2709/include/mach/platform.h | 225 +++++++ - arch/arm/mach-bcm2709/include/mach/system.h | 38 ++ - arch/arm/mach-bcm2709/include/mach/timex.h | 23 + - arch/arm/mach-bcm2709/include/mach/uncompress.h | 84 +++ - arch/arm/mach-bcm2709/include/mach/vc_mem.h | 35 + - arch/arm/mach-bcm2709/include/mach/vc_support.h | 69 ++ - arch/arm/mach-bcm2709/include/mach/vmalloc.h | 20 + - arch/arm/mach-bcm2709/vc_mem.c | 431 ++++++++++++ - arch/arm/mach-bcm2709/vc_support.c | 318 +++++++++ - arch/arm/mm/Kconfig | 2 +- - arch/arm/mm/proc-v6.S | 15 +- - arch/arm/mm/proc-v7.S | 1 + - arch/arm/tools/mach-types | 2 + - drivers/clocksource/arm_arch_timer.c | 36 + - drivers/tty/serial/amba-pl011.c | 2 +- - include/linux/mmc/host.h | 1 + - 62 files changed, 6436 insertions(+), 5 deletions(-) - create mode 100644 arch/arm/mach-bcm2708/Kconfig - create mode 100644 arch/arm/mach-bcm2708/Makefile - create mode 100644 arch/arm/mach-bcm2708/Makefile.boot - create mode 100644 arch/arm/mach-bcm2708/armctrl.c - create mode 100644 arch/arm/mach-bcm2708/armctrl.h - create mode 100644 arch/arm/mach-bcm2708/bcm2708.c - create mode 100644 arch/arm/mach-bcm2708/bcm2708.h - create mode 100644 arch/arm/mach-bcm2708/include/mach/arm_control.h - create mode 100644 arch/arm/mach-bcm2708/include/mach/clkdev.h - create mode 100644 arch/arm/mach-bcm2708/include/mach/debug-macro.S - create mode 100644 arch/arm/mach-bcm2708/include/mach/entry-macro.S - create mode 100644 arch/arm/mach-bcm2708/include/mach/frc.h - create mode 100644 arch/arm/mach-bcm2708/include/mach/hardware.h - create mode 100644 arch/arm/mach-bcm2708/include/mach/io.h - create mode 100644 arch/arm/mach-bcm2708/include/mach/irqs.h - create mode 100644 arch/arm/mach-bcm2708/include/mach/memory.h - create mode 100644 arch/arm/mach-bcm2708/include/mach/platform.h - create mode 100644 arch/arm/mach-bcm2708/include/mach/system.h - create mode 100644 arch/arm/mach-bcm2708/include/mach/timex.h - create mode 100644 arch/arm/mach-bcm2708/include/mach/uncompress.h - create mode 100644 arch/arm/mach-bcm2708/include/mach/vmalloc.h - create mode 100644 arch/arm/mach-bcm2709/Kconfig - create mode 100644 arch/arm/mach-bcm2709/Makefile - create mode 100644 arch/arm/mach-bcm2709/Makefile.boot - create mode 100644 arch/arm/mach-bcm2709/armctrl.c - create mode 100644 arch/arm/mach-bcm2709/armctrl.h - create mode 100644 arch/arm/mach-bcm2709/bcm2708_gpio.c - create mode 100644 arch/arm/mach-bcm2709/bcm2709.c - create mode 100644 arch/arm/mach-bcm2709/bcm2709.h - create mode 100644 arch/arm/mach-bcm2709/delay.S - create mode 100644 arch/arm/mach-bcm2709/include/mach/arm_control.h - create mode 100644 arch/arm/mach-bcm2709/include/mach/barriers.h - create mode 100644 arch/arm/mach-bcm2709/include/mach/clkdev.h - create mode 100644 arch/arm/mach-bcm2709/include/mach/debug-macro.S - create mode 100644 arch/arm/mach-bcm2709/include/mach/entry-macro.S - create mode 100644 arch/arm/mach-bcm2709/include/mach/frc.h - create mode 100644 arch/arm/mach-bcm2709/include/mach/gpio.h - create mode 100644 arch/arm/mach-bcm2709/include/mach/hardware.h - create mode 100644 arch/arm/mach-bcm2709/include/mach/io.h - create mode 100644 arch/arm/mach-bcm2709/include/mach/irqs.h - create mode 100644 arch/arm/mach-bcm2709/include/mach/memory.h - create mode 100644 arch/arm/mach-bcm2709/include/mach/platform.h - create mode 100644 arch/arm/mach-bcm2709/include/mach/system.h - create mode 100644 arch/arm/mach-bcm2709/include/mach/timex.h - create mode 100644 arch/arm/mach-bcm2709/include/mach/uncompress.h - create mode 100644 arch/arm/mach-bcm2709/include/mach/vc_mem.h - create mode 100755 arch/arm/mach-bcm2709/include/mach/vc_support.h - create mode 100644 arch/arm/mach-bcm2709/include/mach/vmalloc.h - create mode 100644 arch/arm/mach-bcm2709/vc_mem.c - create mode 100644 arch/arm/mach-bcm2709/vc_support.c - ---- a/arch/arm/Kconfig -+++ b/arch/arm/Kconfig -@@ -314,6 +314,42 @@ choice - default ARCH_VERSATILE if !MMU - default ARCH_MULTIPLATFORM if MMU - -+config ARCH_BCM2708 -+ bool "Broadcom BCM2708 family" -+ select CPU_V6 -+ select ARM_AMBA -+ select HAVE_SCHED_CLOCK -+ select NEED_MACH_GPIO_H -+ select NEED_MACH_MEMORY_H -+ select COMMON_CLK -+ select ARCH_HAS_CPUFREQ -+ select GENERIC_CLOCKEVENTS -+ select ARM_ERRATA_411920 -+ select MACH_BCM2708 -+ select VC4 -+ select FIQ -+ help -+ This enables support for Broadcom BCM2708 boards. -+ -+config ARCH_BCM2709 -+ bool "Broadcom BCM2709 family" -+ select ARCH_HAS_BARRIERS if SMP -+ select CPU_V7 -+ select HAVE_SMP -+ select ARM_AMBA -+ select MIGHT_HAVE_CACHE_L2X0 -+ select HAVE_SCHED_CLOCK -+ select NEED_MACH_MEMORY_H -+ select NEED_MACH_IO_H -+ select COMMON_CLK -+ select ARCH_HAS_CPUFREQ -+ select GENERIC_CLOCKEVENTS -+ select MACH_BCM2709 -+ select VC4 -+ select FIQ -+ help -+ This enables support for Broadcom BCM2709 boards. -+ - config ARCH_MULTIPLATFORM - bool "Allow multiple platforms to be selected" - depends on MMU -@@ -824,6 +860,9 @@ config ARCH_VIRT - # Kconfigs may be included either alphabetically (according to the - # plat- suffix) or along side the corresponding mach-* source. - # -+source "arch/arm/mach-bcm2708/Kconfig" -+source "arch/arm/mach-bcm2709/Kconfig" -+ - source "arch/arm/mach-mvebu/Kconfig" - - source "arch/arm/mach-alpine/Kconfig" ---- a/arch/arm/Kconfig.debug -+++ b/arch/arm/Kconfig.debug -@@ -1197,6 +1197,14 @@ choice - options; the platform specific options are deprecated - and will be soon removed. - -+ config DEBUG_BCM2708_UART0 -+ bool "Broadcom BCM2708 UART0 (PL011)" -+ depends on MACH_BCM2708 -+ help -+ Say Y here if you want the debug print routines to direct -+ their output to UART 0. The port must have been initialised -+ by the boot-loader before use. -+ - endchoice - - config DEBUG_AT91_UART ---- a/arch/arm/Makefile -+++ b/arch/arm/Makefile -@@ -155,6 +155,8 @@ textofs-$(CONFIG_ARCH_AXXIA) := 0x003080 - - # Machine directory name. This list is sorted alphanumerically - # by CONFIG_* macro name. -+machine-$(CONFIG_ARCH_BCM2708) += bcm2708 -+machine-$(CONFIG_ARCH_BCM2709) += bcm2709 - machine-$(CONFIG_ARCH_ALPINE) += alpine - machine-$(CONFIG_ARCH_AT91) += at91 - machine-$(CONFIG_ARCH_AXXIA) += axxia ---- a/arch/arm/kernel/head.S -+++ b/arch/arm/kernel/head.S -@@ -680,6 +680,14 @@ ARM_BE8(rev16 ip, ip) - ldrcc r7, [r4], #4 @ use branch for delay slot - bcc 1b - ret lr -+ nop -+ nop -+ nop -+ nop -+ nop -+ nop -+ nop -+ nop - #endif - ENDPROC(__fixup_a_pv_table) - ---- a/arch/arm/kernel/process.c -+++ b/arch/arm/kernel/process.c -@@ -98,6 +98,16 @@ void arch_cpu_idle_dead(void) - } - #endif - -+char bcm2708_reboot_mode = 'h'; -+ -+int __init reboot_setup(char *str) -+{ -+ bcm2708_reboot_mode = str[0]; -+ return 1; -+} -+ -+__setup("reboot=", reboot_setup); -+ - void __show_regs(struct pt_regs *regs) - { - unsigned long flags; ---- /dev/null -+++ b/arch/arm/mach-bcm2708/Kconfig -@@ -0,0 +1,30 @@ -+menu "Broadcom BCM2708 Implementations" -+ depends on ARCH_BCM2708 -+ -+config MACH_BCM2708 -+ bool "Broadcom BCM2708 Development Platform" -+ select NEED_MACH_MEMORY_H -+ select NEED_MACH_IO_H -+ select CPU_V6 -+ help -+ Include support for the Broadcom(R) BCM2708 platform. -+ -+config BCM2708_DT -+ bool "BCM2708 Device Tree support" -+ depends on MACH_BCM2708 -+ default n -+ select USE_OF -+ select ARCH_REQUIRE_GPIOLIB -+ select PINCTRL -+ select PINCTRL_BCM2835 -+ help -+ Enable Device Tree support for BCM2708 -+ -+config BCM2708_NOL2CACHE -+ bool "Videocore L2 cache disable" -+ depends on MACH_BCM2708 -+ default n -+ help -+ Do not allow ARM to use GPU's L2 cache. Requires disable_l2cache in config.txt. -+ -+endmenu ---- /dev/null -+++ b/arch/arm/mach-bcm2708/Makefile -@@ -0,0 +1,5 @@ -+# -+# Makefile for the linux kernel. -+# -+ -+obj-$(CONFIG_MACH_BCM2708) += bcm2708.o armctrl.o ---- /dev/null -+++ b/arch/arm/mach-bcm2708/Makefile.boot -@@ -0,0 +1,3 @@ -+ zreladdr-y := 0x00008000 -+params_phys-y := 0x00000100 -+initrd_phys-y := 0x00800000 ---- /dev/null -+++ b/arch/arm/mach-bcm2708/armctrl.c -@@ -0,0 +1,304 @@ -+/* -+ * linux/arch/arm/mach-bcm2708/armctrl.c -+ * -+ * Copyright (C) 2010 Broadcom -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+#include <linux/init.h> -+#include <linux/list.h> -+#include <linux/io.h> -+#include <linux/version.h> -+#include <linux/syscore_ops.h> -+#include <linux/interrupt.h> -+#include <linux/irqdomain.h> -+#include <linux/of.h> -+ -+#include <asm/mach/irq.h> -+#include <mach/hardware.h> -+#include "armctrl.h" -+ -+/* For support of kernels >= 3.0 assume only one VIC for now*/ -+static unsigned int remap_irqs[(INTERRUPT_ARASANSDIO + 1) - INTERRUPT_JPEG] = { -+ INTERRUPT_VC_JPEG, -+ INTERRUPT_VC_USB, -+ INTERRUPT_VC_3D, -+ INTERRUPT_VC_DMA2, -+ INTERRUPT_VC_DMA3, -+ INTERRUPT_VC_I2C, -+ INTERRUPT_VC_SPI, -+ INTERRUPT_VC_I2SPCM, -+ INTERRUPT_VC_SDIO, -+ INTERRUPT_VC_UART, -+ INTERRUPT_VC_ARASANSDIO -+}; -+ -+static void armctrl_mask_irq(struct irq_data *d) -+{ -+ static const unsigned int disables[4] = { -+ ARM_IRQ_DIBL1, -+ ARM_IRQ_DIBL2, -+ ARM_IRQ_DIBL3, -+ 0 -+ }; -+ -+ unsigned int data = (unsigned int)irq_get_chip_data(d->irq); -+ writel(1 << (data & 0x1f), __io_address(disables[(data >> 5) & 0x3])); -+} -+ -+static void armctrl_unmask_irq(struct irq_data *d) -+{ -+ static const unsigned int enables[4] = { -+ ARM_IRQ_ENBL1, -+ ARM_IRQ_ENBL2, -+ ARM_IRQ_ENBL3, -+ 0 -+ }; -+ -+ unsigned int data = (unsigned int)irq_get_chip_data(d->irq); -+ writel(1 << (data & 0x1f), __io_address(enables[(data >> 5) & 0x3])); -+} -+ -+#ifdef CONFIG_OF -+ -+#define NR_IRQS_BANK0 21 -+#define NR_BANKS 3 -+#define IRQS_PER_BANK 32 -+ -+/* from drivers/irqchip/irq-bcm2835.c */ -+static int armctrl_xlate(struct irq_domain *d, struct device_node *ctrlr, -+ const u32 *intspec, unsigned int intsize, -+ unsigned long *out_hwirq, unsigned int *out_type) -+{ -+ if (WARN_ON(intsize != 2)) -+ return -EINVAL; -+ -+ if (WARN_ON(intspec[0] >= NR_BANKS)) -+ return -EINVAL; -+ -+ if (WARN_ON(intspec[1] >= IRQS_PER_BANK)) -+ return -EINVAL; -+ -+ if (WARN_ON(intspec[0] == 0 && intspec[1] >= NR_IRQS_BANK0)) -+ return -EINVAL; -+ -+ if (intspec[0] == 0) -+ *out_hwirq = ARM_IRQ0_BASE + intspec[1]; -+ else if (intspec[0] == 1) -+ *out_hwirq = ARM_IRQ1_BASE + intspec[1]; -+ else -+ *out_hwirq = ARM_IRQ2_BASE + intspec[1]; -+ -+ /* reverse remap_irqs[] */ -+ switch (*out_hwirq) { -+ case INTERRUPT_VC_JPEG: -+ *out_hwirq = INTERRUPT_JPEG; -+ break; -+ case INTERRUPT_VC_USB: -+ *out_hwirq = INTERRUPT_USB; -+ break; -+ case INTERRUPT_VC_3D: -+ *out_hwirq = INTERRUPT_3D; -+ break; -+ case INTERRUPT_VC_DMA2: -+ *out_hwirq = INTERRUPT_DMA2; -+ break; -+ case INTERRUPT_VC_DMA3: -+ *out_hwirq = INTERRUPT_DMA3; -+ break; -+ case INTERRUPT_VC_I2C: -+ *out_hwirq = INTERRUPT_I2C; -+ break; -+ case INTERRUPT_VC_SPI: -+ *out_hwirq = INTERRUPT_SPI; -+ break; -+ case INTERRUPT_VC_I2SPCM: -+ *out_hwirq = INTERRUPT_I2SPCM; -+ break; -+ case INTERRUPT_VC_SDIO: -+ *out_hwirq = INTERRUPT_SDIO; -+ break; -+ case INTERRUPT_VC_UART: -+ *out_hwirq = INTERRUPT_UART; -+ break; -+ case INTERRUPT_VC_ARASANSDIO: -+ *out_hwirq = INTERRUPT_ARASANSDIO; -+ break; -+ } -+ -+ *out_type = IRQ_TYPE_NONE; -+ return 0; -+} -+ -+static struct irq_domain_ops armctrl_ops = { -+ .xlate = armctrl_xlate -+}; -+ -+void __init armctrl_dt_init(void) -+{ -+ struct device_node *np; -+ struct irq_domain *domain; -+ -+ np = of_find_compatible_node(NULL, NULL, "brcm,bcm2708-armctrl-ic"); -+ if (!np) -+ return; -+ -+ domain = irq_domain_add_legacy(np, BCM2708_ALLOC_IRQS, -+ IRQ_ARMCTRL_START, 0, -+ &armctrl_ops, NULL); -+ WARN_ON(!domain); -+} -+#else -+void __init armctrl_dt_init(void) { } -+#endif /* CONFIG_OF */ -+ -+#if defined(CONFIG_PM) -+ -+/* for kernels 3.xx use the new syscore_ops apis but for older kernels use the sys dev class */ -+ -+/* Static defines -+ * struct armctrl_device - VIC PM device (< 3.xx) -+ * @sysdev: The system device which is registered. (< 3.xx) -+ * @irq: The IRQ number for the base of the VIC. -+ * @base: The register base for the VIC. -+ * @resume_sources: A bitmask of interrupts for resume. -+ * @resume_irqs: The IRQs enabled for resume. -+ * @int_select: Save for VIC_INT_SELECT. -+ * @int_enable: Save for VIC_INT_ENABLE. -+ * @soft_int: Save for VIC_INT_SOFT. -+ * @protect: Save for VIC_PROTECT. -+ */ -+struct armctrl_info { -+ void __iomem *base; -+ int irq; -+ u32 resume_sources; -+ u32 resume_irqs; -+ u32 int_select; -+ u32 int_enable; -+ u32 soft_int; -+ u32 protect; -+} armctrl; -+ -+static int armctrl_suspend(void) -+{ -+ return 0; -+} -+ -+static void armctrl_resume(void) -+{ -+ return; -+} -+ -+/** -+ * armctrl_pm_register - Register a VIC for later power management control -+ * @base: The base address of the VIC. -+ * @irq: The base IRQ for the VIC. -+ * @resume_sources: bitmask of interrupts allowed for resume sources. -+ * -+ * For older kernels (< 3.xx) do - -+ * Register the VIC with the system device tree so that it can be notified -+ * of suspend and resume requests and ensure that the correct actions are -+ * taken to re-instate the settings on resume. -+ */ -+static void __init armctrl_pm_register(void __iomem * base, unsigned int irq, -+ u32 resume_sources) -+{ -+ armctrl.base = base; -+ armctrl.resume_sources = resume_sources; -+ armctrl.irq = irq; -+} -+ -+static int armctrl_set_wake(struct irq_data *d, unsigned int on) -+{ -+ unsigned int off = d->irq & 31; -+ u32 bit = 1 << off; -+ -+ if (!(bit & armctrl.resume_sources)) -+ return -EINVAL; -+ -+ if (on) -+ armctrl.resume_irqs |= bit; -+ else -+ armctrl.resume_irqs &= ~bit; -+ -+ return 0; -+} -+ -+#else -+static inline void armctrl_pm_register(void __iomem * base, unsigned int irq, -+ u32 arg1) -+{ -+} -+ -+#define armctrl_suspend NULL -+#define armctrl_resume NULL -+#define armctrl_set_wake NULL -+#endif /* CONFIG_PM */ -+ -+static struct syscore_ops armctrl_syscore_ops = { -+ .suspend = armctrl_suspend, -+ .resume = armctrl_resume, -+}; -+ -+/** -+ * armctrl_syscore_init - initicall to register VIC pm functions -+ * -+ * This is called via late_initcall() to register -+ * the resources for the VICs due to the early -+ * nature of the VIC's registration. -+*/ -+static int __init armctrl_syscore_init(void) -+{ -+ register_syscore_ops(&armctrl_syscore_ops); -+ return 0; -+} -+ -+late_initcall(armctrl_syscore_init); -+ -+static struct irq_chip armctrl_chip = { -+ .name = "ARMCTRL", -+ .irq_ack = NULL, -+ .irq_mask = armctrl_mask_irq, -+ .irq_unmask = armctrl_unmask_irq, -+ .irq_set_wake = armctrl_set_wake, -+}; -+ -+/** -+ * armctrl_init - initialise a vectored interrupt controller -+ * @base: iomem base address -+ * @irq_start: starting interrupt number, must be muliple of 32 -+ * @armctrl_sources: bitmask of interrupt sources to allow -+ * @resume_sources: bitmask of interrupt sources to allow for resume -+ */ -+int __init armctrl_init(void __iomem * base, unsigned int irq_start, -+ u32 armctrl_sources, u32 resume_sources) -+{ -+ unsigned int irq; -+ -+ for (irq = 0; irq < BCM2708_ALLOC_IRQS; irq++) { -+ unsigned int data = irq; -+ if (irq >= INTERRUPT_JPEG && irq <= INTERRUPT_ARASANSDIO) -+ data = remap_irqs[irq - INTERRUPT_JPEG]; -+ -+ irq_set_chip(irq, &armctrl_chip); -+ irq_set_chip_data(irq, (void *)data); -+ irq_set_handler(irq, handle_level_irq); -+ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); -+ } -+ -+ armctrl_pm_register(base, irq_start, resume_sources); -+ armctrl_dt_init(); -+ return 0; -+} ---- /dev/null -+++ b/arch/arm/mach-bcm2708/armctrl.h -@@ -0,0 +1,27 @@ -+/* -+ * linux/arch/arm/mach-bcm2708/armctrl.h -+ * -+ * Copyright (C) 2010 Broadcom -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+ -+#ifndef __BCM2708_ARMCTRL_H -+#define __BCM2708_ARMCTRL_H -+ -+extern int __init armctrl_init(void __iomem * base, unsigned int irq_start, -+ u32 armctrl_sources, u32 resume_sources); -+ -+#endif ---- /dev/null -+++ b/arch/arm/mach-bcm2708/bcm2708.c -@@ -0,0 +1,622 @@ -+/* -+ * linux/arch/arm/mach-bcm2708/bcm2708.c -+ * -+ * Copyright (C) 2010 Broadcom -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+ -+#include <linux/init.h> -+#include <linux/device.h> -+#include <linux/dma-mapping.h> -+#include <linux/serial_8250.h> -+#include <linux/platform_device.h> -+#include <linux/syscore_ops.h> -+#include <linux/interrupt.h> -+#include <linux/amba/bus.h> -+#include <linux/amba/clcd.h> -+#include <linux/clk-provider.h> -+#include <linux/clkdev.h> -+#include <linux/clockchips.h> -+#include <linux/cnt32_to_63.h> -+#include <linux/io.h> -+#include <linux/module.h> -+#include <linux/of_platform.h> -+#include <linux/gpio/machine.h> -+ -+#include <linux/version.h> -+#include <linux/clkdev.h> -+#include <asm/system_info.h> -+#include <mach/hardware.h> -+#include <asm/irq.h> -+#include <linux/leds.h> -+#include <asm/mach-types.h> -+#include <linux/sched_clock.h> -+ -+#include <asm/mach/arch.h> -+#include <asm/mach/flash.h> -+#include <asm/mach/irq.h> -+#include <asm/mach/time.h> -+#include <asm/mach/map.h> -+ -+#include <mach/timex.h> -+#include <mach/system.h> -+ -+#include <linux/delay.h> -+ -+#include "bcm2708.h" -+#include "armctrl.h" -+ -+#ifdef CONFIG_BCM_VC_CMA -+#include <linux/broadcom/vc_cma.h> -+#endif -+ -+ -+/* Effectively we have an IOMMU (ARM<->VideoCore map) that is set up to -+ * give us IO access only to 64Mbytes of physical memory (26 bits). We could -+ * represent this window by setting our dmamasks to 26 bits but, in fact -+ * we're not going to use addresses outside this range (they're not in real -+ * memory) so we don't bother. -+ * -+ * In the future we might include code to use this IOMMU to remap other -+ * physical addresses onto VideoCore memory then the use of 32-bits would be -+ * more legitimate. -+ */ -+#define DMA_MASK_BITS_COMMON 32 -+ -+/* command line parameters */ -+static unsigned boardrev, serial; -+static unsigned uart_clock = UART0_CLOCK; -+static unsigned disk_led_gpio = 16; -+static unsigned disk_led_active_low = 1; -+static unsigned reboot_part = 0; -+ -+static unsigned use_dt = 0; -+ -+static void __init bcm2708_init_led(void); -+ -+void __init bcm2708_init_irq(void) -+{ -+ armctrl_init(__io_address(ARMCTRL_IC_BASE), 0, 0, 0); -+} -+ -+static struct map_desc bcm2708_io_desc[] __initdata = { -+ { -+ .virtual = IO_ADDRESS(ARMCTRL_BASE), -+ .pfn = __phys_to_pfn(ARMCTRL_BASE), -+ .length = SZ_4K, -+ .type = MT_DEVICE}, -+ { -+ .virtual = IO_ADDRESS(UART0_BASE), -+ .pfn = __phys_to_pfn(UART0_BASE), -+ .length = SZ_4K, -+ .type = MT_DEVICE}, -+ { -+ .virtual = IO_ADDRESS(UART1_BASE), -+ .pfn = __phys_to_pfn(UART1_BASE), -+ .length = SZ_4K, -+ .type = MT_DEVICE}, -+ { -+ .virtual = IO_ADDRESS(DMA_BASE), -+ .pfn = __phys_to_pfn(DMA_BASE), -+ .length = SZ_4K, -+ .type = MT_DEVICE}, -+ { -+ .virtual = IO_ADDRESS(MCORE_BASE), -+ .pfn = __phys_to_pfn(MCORE_BASE), -+ .length = SZ_4K, -+ .type = MT_DEVICE}, -+ { -+ .virtual = IO_ADDRESS(ST_BASE), -+ .pfn = __phys_to_pfn(ST_BASE), -+ .length = SZ_4K, -+ .type = MT_DEVICE}, -+ { -+ .virtual = IO_ADDRESS(USB_BASE), -+ .pfn = __phys_to_pfn(USB_BASE), -+ .length = SZ_128K, -+ .type = MT_DEVICE}, -+ { -+ .virtual = IO_ADDRESS(PM_BASE), -+ .pfn = __phys_to_pfn(PM_BASE), -+ .length = SZ_4K, -+ .type = MT_DEVICE}, -+ { -+ .virtual = IO_ADDRESS(GPIO_BASE), -+ .pfn = __phys_to_pfn(GPIO_BASE), -+ .length = SZ_4K, -+ .type = MT_DEVICE} -+}; -+ -+void __init bcm2708_map_io(void) -+{ -+ iotable_init(bcm2708_io_desc, ARRAY_SIZE(bcm2708_io_desc)); -+} -+ -+/* The STC is a free running counter that increments at the rate of 1MHz */ -+#define STC_FREQ_HZ 1000000 -+ -+static inline uint32_t timer_read(void) -+{ -+ /* STC: a free running counter that increments at the rate of 1MHz */ -+ return readl(__io_address(ST_BASE + 0x04)); -+} -+ -+static unsigned long bcm2708_read_current_timer(void) -+{ -+ return timer_read(); -+} -+ -+static u64 notrace bcm2708_read_sched_clock(void) -+{ -+ return timer_read(); -+} -+ -+static cycle_t clksrc_read(struct clocksource *cs) -+{ -+ return timer_read(); -+} -+ -+static struct clocksource clocksource_stc = { -+ .name = "stc", -+ .rating = 300, -+ .read = clksrc_read, -+ .mask = CLOCKSOURCE_MASK(32), -+ .flags = CLOCK_SOURCE_IS_CONTINUOUS, -+}; -+ -+unsigned long frc_clock_ticks32(void) -+{ -+ return timer_read(); -+} -+ -+static void __init bcm2708_clocksource_init(void) -+{ -+ if (clocksource_register_hz(&clocksource_stc, STC_FREQ_HZ)) { -+ printk(KERN_ERR "timer: failed to initialize clock " -+ "source %s\n", clocksource_stc.name); -+ } -+} -+ -+struct clk __init *bcm2708_clk_register(const char *name, unsigned long fixed_rate) -+{ -+ struct clk *clk; -+ -+ clk = clk_register_fixed_rate(NULL, name, NULL, CLK_IS_ROOT, -+ fixed_rate); -+ if (IS_ERR(clk)) -+ pr_err("%s not registered\n", name); -+ -+ return clk; -+} -+ -+void __init bcm2708_register_clkdev(struct clk *clk, const char *name) -+{ -+ int ret; -+ -+ ret = clk_register_clkdev(clk, NULL, name); -+ if (ret) -+ pr_err("%s alias not registered\n", name); -+} -+ -+void __init bcm2708_init_clocks(void) -+{ -+ struct clk *clk; -+ -+ clk = bcm2708_clk_register("uart0_clk", uart_clock); -+ bcm2708_register_clkdev(clk, "dev:f1"); -+ -+ clk = bcm2708_clk_register("sdhost_clk", 250000000); -+ bcm2708_register_clkdev(clk, "mmc-bcm2835.0"); -+ bcm2708_register_clkdev(clk, "bcm2708_spi.0"); -+ bcm2708_register_clkdev(clk, "bcm2708_i2c.0"); -+ bcm2708_register_clkdev(clk, "bcm2708_i2c.1"); -+} -+ -+#define UART0_IRQ { IRQ_UART, 0 /*NO_IRQ*/ } -+#define UART0_DMA { 15, 14 } -+ -+AMBA_DEVICE(uart0, "dev:f1", UART0, NULL); -+ -+static struct amba_device *amba_devs[] __initdata = { -+ &uart0_device, -+}; -+ -+static u64 fb_dmamask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON); -+ -+static struct platform_device bcm2708_fb_device = { -+ .name = "bcm2708_fb", -+ .id = -1, /* only one bcm2708_fb */ -+ .resource = NULL, -+ .num_resources = 0, -+ .dev = { -+ .dma_mask = &fb_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON), -+ }, -+}; -+ -+static struct resource bcm2708_usb_resources[] = { -+ [0] = { -+ .start = USB_BASE, -+ .end = USB_BASE + SZ_128K - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = IRQ_USB, -+ .end = IRQ_USB, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static u64 usb_dmamask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON); -+ -+static struct platform_device bcm2708_usb_device = { -+ .name = "bcm2708_usb", -+ .id = -1, /* only one bcm2708_usb */ -+ .resource = bcm2708_usb_resources, -+ .num_resources = ARRAY_SIZE(bcm2708_usb_resources), -+ .dev = { -+ .dma_mask = &usb_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON), -+ }, -+}; -+ -+static struct resource bcm2708_vcio_resources[] = { -+ { -+ .start = ARMCTRL_0_MAIL0_BASE, -+ .end = ARMCTRL_0_MAIL0_BASE + SZ_64 - 1, -+ .flags = IORESOURCE_MEM, -+ }, { -+ .start = IRQ_ARM_MAILBOX, -+ .end = IRQ_ARM_MAILBOX, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static u64 vcio_dmamask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON); -+ -+static struct platform_device bcm2708_vcio_device = { -+ .name = "bcm2708_vcio", -+ .id = -1, /* only one VideoCore I/O area */ -+ .resource = bcm2708_vcio_resources, -+ .num_resources = ARRAY_SIZE(bcm2708_vcio_resources), -+ .dev = { -+ .dma_mask = &vcio_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON), -+ }, -+}; -+ -+int __init bcm_register_device(struct platform_device *pdev) -+{ -+ int ret; -+ -+ ret = platform_device_register(pdev); -+ if (ret) -+ pr_debug("Unable to register platform device '%s': %d\n", -+ pdev->name, ret); -+ -+ return ret; -+} -+ -+/* -+ * Use these macros for platform and i2c devices that are present in the -+ * Device Tree. This way the devices are only added on non-DT systems. -+ */ -+#define bcm_register_device_dt(pdev) \ -+ if (!use_dt) bcm_register_device(pdev) -+ -+#define i2c_register_board_info_dt(busnum, info, n) \ -+ if (!use_dt) i2c_register_board_info(busnum, info, n) -+ -+int calc_rsts(int partition) -+{ -+ return PM_PASSWORD | -+ ((partition & (1 << 0)) << 0) | -+ ((partition & (1 << 1)) << 1) | -+ ((partition & (1 << 2)) << 2) | -+ ((partition & (1 << 3)) << 3) | -+ ((partition & (1 << 4)) << 4) | -+ ((partition & (1 << 5)) << 5); -+} -+ -+static void bcm2708_restart(enum reboot_mode mode, const char *cmd) -+{ -+ extern char bcm2708_reboot_mode; -+ uint32_t pm_rstc, pm_wdog; -+ uint32_t timeout = 10; -+ uint32_t pm_rsts = 0; -+ -+ if(bcm2708_reboot_mode == 'q') -+ { -+ // NOOBS < 1.3 booting with reboot=q -+ pm_rsts = readl(__io_address(PM_RSTS)); -+ pm_rsts = PM_PASSWORD | pm_rsts | PM_RSTS_HADWRQ_SET; -+ } -+ else if(bcm2708_reboot_mode == 'p') -+ { -+ // NOOBS < 1.3 halting -+ pm_rsts = readl(__io_address(PM_RSTS)); -+ pm_rsts = PM_PASSWORD | pm_rsts | PM_RSTS_HADWRH_SET; -+ } -+ else -+ { -+ pm_rsts = calc_rsts(reboot_part); -+ } -+ -+ writel(pm_rsts, __io_address(PM_RSTS)); -+ -+ /* Setup watchdog for reset */ -+ pm_rstc = readl(__io_address(PM_RSTC)); -+ -+ pm_wdog = PM_PASSWORD | (timeout & PM_WDOG_TIME_SET); // watchdog timer = timer clock / 16; need password (31:16) + value (11:0) -+ pm_rstc = PM_PASSWORD | (pm_rstc & PM_RSTC_WRCFG_CLR) | PM_RSTC_WRCFG_FULL_RESET; -+ -+ writel(pm_wdog, __io_address(PM_WDOG)); -+ writel(pm_rstc, __io_address(PM_RSTC)); -+} -+ -+/* We can't really power off, but if we do the normal reset scheme, and indicate to bootcode.bin not to reboot, then most of the chip will be powered off */ -+static void bcm2708_power_off(void) -+{ -+ extern char bcm2708_reboot_mode; -+ if(bcm2708_reboot_mode == 'q') -+ { -+ // NOOBS < v1.3 -+ bcm2708_restart('p', ""); -+ } -+ else -+ { -+ /* partition 63 is special code for HALT the bootloader knows not to boot*/ -+ reboot_part = 63; -+ /* continue with normal reset mechanism */ -+ bcm2708_restart(0, ""); -+ } -+} -+ -+static void __init bcm2708_init_uart1(void) -+{ -+ struct device_node *np; -+ -+ np = of_find_compatible_node(NULL, NULL, "brcm,bcm2835-aux-uart"); -+ if (of_device_is_available(np)) { -+ pr_info("bcm2708: Mini UART enabled\n"); -+ writel(1, __io_address(UART1_BASE + 0x4)); -+ } -+} -+ -+#ifdef CONFIG_OF -+static void __init bcm2708_dt_init(void) -+{ -+ int ret; -+ -+ of_clk_init(NULL); -+ ret = of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); -+ if (ret) { -+ pr_err("of_platform_populate failed: %d\n", ret); -+ /* Proceed as if CONFIG_OF was not defined */ -+ } else { -+ use_dt = 1; -+ } -+} -+#else -+static void __init bcm2708_dt_init(void) { } -+#endif /* CONFIG_OF */ -+ -+void __init bcm2708_init(void) -+{ -+ int i; -+ -+#if defined(CONFIG_BCM_VC_CMA) -+ vc_cma_early_init(); -+#endif -+ printk("bcm2708.uart_clock = %d\n", uart_clock); -+ pm_power_off = bcm2708_power_off; -+ -+ bcm2708_init_clocks(); -+ bcm2708_dt_init(); -+ -+ bcm_register_device(&bcm2708_vcio_device); -+#ifdef CONFIG_BCM2708_GPIO -+ bcm_register_device_dt(&bcm2708_gpio_device); -+#endif -+ bcm_register_device_dt(&bcm2708_fb_device); -+ bcm_register_device_dt(&bcm2708_usb_device); -+ -+ bcm2708_init_led(); -+ bcm2708_init_uart1(); -+ -+ if (!use_dt) { -+ for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { -+ struct amba_device *d = amba_devs[i]; -+ amba_device_register(d, &iomem_resource); -+ } -+ } -+ system_rev = boardrev; -+ system_serial_low = serial; -+} -+ -+static void timer_set_mode(enum clock_event_mode mode, -+ struct clock_event_device *clk) -+{ -+ switch (mode) { -+ case CLOCK_EVT_MODE_ONESHOT: /* Leave the timer disabled, .set_next_event will enable it */ -+ case CLOCK_EVT_MODE_SHUTDOWN: -+ break; -+ case CLOCK_EVT_MODE_PERIODIC: -+ -+ case CLOCK_EVT_MODE_UNUSED: -+ case CLOCK_EVT_MODE_RESUME: -+ -+ default: -+ printk(KERN_ERR "timer_set_mode: unhandled mode:%d\n", -+ (int)mode); -+ break; -+ } -+ -+} -+ -+static int timer_set_next_event(unsigned long cycles, -+ struct clock_event_device *unused) -+{ -+ unsigned long stc; -+ do { -+ stc = readl(__io_address(ST_BASE + 0x04)); -+ /* We could take a FIQ here, which may push ST above STC3 */ -+ writel(stc + cycles, __io_address(ST_BASE + 0x18)); -+ } while ((signed long) cycles >= 0 && -+ (signed long) (readl(__io_address(ST_BASE + 0x04)) - stc) -+ >= (signed long) cycles); -+ return 0; -+} -+ -+static struct clock_event_device timer0_clockevent = { -+ .name = "timer0", -+ .shift = 32, -+ .features = CLOCK_EVT_FEAT_ONESHOT, -+ .set_mode = timer_set_mode, -+ .set_next_event = timer_set_next_event, -+}; -+ -+/* -+ * IRQ handler for the timer -+ */ -+static irqreturn_t bcm2708_timer_interrupt(int irq, void *dev_id) -+{ -+ struct clock_event_device *evt = &timer0_clockevent; -+ -+ writel(1 << 3, __io_address(ST_BASE + 0x00)); /* stcs clear timer int */ -+ -+ evt->event_handler(evt); -+ -+ return IRQ_HANDLED; -+} -+ -+static struct irqaction bcm2708_timer_irq = { -+ .name = "BCM2708 Timer Tick", -+ .flags = IRQF_TIMER | IRQF_IRQPOLL, -+ .handler = bcm2708_timer_interrupt, -+}; -+ -+/* -+ * Set up timer interrupt, and return the current time in seconds. -+ */ -+ -+static struct delay_timer bcm2708_delay_timer = { -+ .read_current_timer = bcm2708_read_current_timer, -+ .freq = STC_FREQ_HZ, -+}; -+ -+static void __init bcm2708_timer_init(void) -+{ -+ /* init high res timer */ -+ bcm2708_clocksource_init(); -+ -+ /* -+ * Make irqs happen for the system timer -+ */ -+ setup_irq(IRQ_TIMER3, &bcm2708_timer_irq); -+ -+ sched_clock_register(bcm2708_read_sched_clock, 32, STC_FREQ_HZ); -+ -+ timer0_clockevent.mult = -+ div_sc(STC_FREQ_HZ, NSEC_PER_SEC, timer0_clockevent.shift); -+ timer0_clockevent.max_delta_ns = -+ clockevent_delta2ns(0xffffffff, &timer0_clockevent); -+ timer0_clockevent.min_delta_ns = -+ clockevent_delta2ns(0xf, &timer0_clockevent); -+ -+ timer0_clockevent.cpumask = cpumask_of(0); -+ clockevents_register_device(&timer0_clockevent); -+ -+ register_current_timer_delay(&bcm2708_delay_timer); -+} -+ -+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) -+#include <linux/leds.h> -+ -+static struct gpio_led bcm2708_leds[] = { -+ [0] = { -+ .gpio = 16, -+ .name = "led0", -+ .default_trigger = "mmc0", -+ .active_low = 1, -+ }, -+}; -+ -+static struct gpio_led_platform_data bcm2708_led_pdata = { -+ .num_leds = ARRAY_SIZE(bcm2708_leds), -+ .leds = bcm2708_leds, -+}; -+ -+static struct platform_device bcm2708_led_device = { -+ .name = "leds-gpio", -+ .id = -1, -+ .dev = { -+ .platform_data = &bcm2708_led_pdata, -+ }, -+}; -+ -+static void __init bcm2708_init_led(void) -+{ -+ bcm2708_leds[0].gpio = disk_led_gpio; -+ bcm2708_leds[0].active_low = disk_led_active_low; -+ bcm_register_device_dt(&bcm2708_led_device); -+} -+#else -+static inline void bcm2708_init_led(void) -+{ -+} -+#endif -+ -+void __init bcm2708_init_early(void) -+{ -+ /* -+ * Some devices allocate their coherent buffers from atomic -+ * context. Increase size of atomic coherent pool to make sure such -+ * the allocations won't fail. -+ */ -+ init_dma_coherent_pool_size(SZ_4M); -+} -+ -+static void __init board_reserve(void) -+{ -+#if defined(CONFIG_BCM_VC_CMA) -+ vc_cma_reserve(); -+#endif -+} -+ -+static const char * const bcm2708_compat[] = { -+ "brcm,bcm2708", -+ NULL -+}; -+ -+MACHINE_START(BCM2708, "BCM2708") -+ /* Maintainer: Broadcom Europe Ltd. */ -+ .map_io = bcm2708_map_io, -+ .init_irq = bcm2708_init_irq, -+ .init_time = bcm2708_timer_init, -+ .init_machine = bcm2708_init, -+ .init_early = bcm2708_init_early, -+ .reserve = board_reserve, -+ .restart = bcm2708_restart, -+ .dt_compat = bcm2708_compat, -+MACHINE_END -+ -+module_param(boardrev, uint, 0644); -+module_param(serial, uint, 0644); -+module_param(uart_clock, uint, 0644); -+module_param(disk_led_gpio, uint, 0644); -+module_param(disk_led_active_low, uint, 0644); -+module_param(reboot_part, uint, 0644); ---- /dev/null -+++ b/arch/arm/mach-bcm2708/bcm2708.h -@@ -0,0 +1,49 @@ -+/* -+ * linux/arch/arm/mach-bcm2708/bcm2708.h -+ * -+ * BCM2708 machine support header -+ * -+ * Copyright (C) 2010 Broadcom -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+ -+#ifndef __BCM2708_BCM2708_H -+#define __BCM2708_BCM2708_H -+ -+#include <linux/amba/bus.h> -+ -+extern void __init bcm2708_init(void); -+extern void __init bcm2708_init_irq(void); -+extern void __init bcm2708_map_io(void); -+extern struct sys_timer bcm2708_timer; -+extern unsigned int mmc_status(struct device *dev); -+ -+#define AMBA_DEVICE(name, busid, base, plat) \ -+static struct amba_device name##_device = { \ -+ .dev = { \ -+ .coherent_dma_mask = ~0, \ -+ .init_name = busid, \ -+ .platform_data = plat, \ -+ }, \ -+ .res = { \ -+ .start = base##_BASE, \ -+ .end = (base##_BASE) + SZ_4K - 1,\ -+ .flags = IORESOURCE_MEM, \ -+ }, \ -+ .irq = base##_IRQ, \ -+} -+ -+#endif ---- /dev/null -+++ b/arch/arm/mach-bcm2708/include/mach/arm_control.h -@@ -0,0 +1,419 @@ -+/* -+ * linux/arch/arm/mach-bcm2708/arm_control.h -+ * -+ * Copyright (C) 2010 Broadcom -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+ -+#ifndef __BCM2708_ARM_CONTROL_H -+#define __BCM2708_ARM_CONTROL_H -+ -+/* -+ * Definitions and addresses for the ARM CONTROL logic -+ * This file is manually generated. -+ */ -+ -+#define ARM_BASE 0x7E00B000 -+ -+/* Basic configuration */ -+#define ARM_CONTROL0 HW_REGISTER_RW(ARM_BASE+0x000) -+#define ARM_C0_SIZ128M 0x00000000 -+#define ARM_C0_SIZ256M 0x00000001 -+#define ARM_C0_SIZ512M 0x00000002 -+#define ARM_C0_SIZ1G 0x00000003 -+#define ARM_C0_BRESP0 0x00000000 -+#define ARM_C0_BRESP1 0x00000004 -+#define ARM_C0_BRESP2 0x00000008 -+#define ARM_C0_BOOTHI 0x00000010 -+#define ARM_C0_UNUSED05 0x00000020 /* free */ -+#define ARM_C0_FULLPERI 0x00000040 -+#define ARM_C0_UNUSED78 0x00000180 /* free */ -+#define ARM_C0_JTAGMASK 0x00000E00 -+#define ARM_C0_JTAGOFF 0x00000000 -+#define ARM_C0_JTAGBASH 0x00000800 /* Debug on GPIO off */ -+#define ARM_C0_JTAGGPIO 0x00000C00 /* Debug on GPIO on */ -+#define ARM_C0_APROTMSK 0x0000F000 -+#define ARM_C0_DBG0SYNC 0x00010000 /* VPU0 halt sync */ -+#define ARM_C0_DBG1SYNC 0x00020000 /* VPU1 halt sync */ -+#define ARM_C0_SWDBGREQ 0x00040000 /* HW debug request */ -+#define ARM_C0_PASSHALT 0x00080000 /* ARM halt passed to debugger */ -+#define ARM_C0_PRIO_PER 0x00F00000 /* per priority mask */ -+#define ARM_C0_PRIO_L2 0x0F000000 -+#define ARM_C0_PRIO_UC 0xF0000000 -+ -+#define ARM_C0_APROTPASS 0x0000A000 /* Translate 1:1 */ -+#define ARM_C0_APROTUSER 0x00000000 /* Only user mode */ -+#define ARM_C0_APROTSYST 0x0000F000 /* Only system mode */ -+ -+ -+#define ARM_CONTROL1 HW_REGISTER_RW(ARM_BASE+0x440) -+#define ARM_C1_TIMER 0x00000001 /* re-route timer IRQ to VC */ -+#define ARM_C1_MAIL 0x00000002 /* re-route Mail IRQ to VC */ -+#define ARM_C1_BELL0 0x00000004 /* re-route Doorbell 0 to VC */ -+#define ARM_C1_BELL1 0x00000008 /* re-route Doorbell 1 to VC */ -+#define ARM_C1_PERSON 0x00000100 /* peripherals on */ -+#define ARM_C1_REQSTOP 0x00000200 /* ASYNC bridge request stop */ -+ -+#define ARM_STATUS HW_REGISTER_RW(ARM_BASE+0x444) -+#define ARM_S_ACKSTOP 0x80000000 /* Bridge stopped */ -+#define ARM_S_READPEND 0x000003FF /* pending reads counter */ -+#define ARM_S_WRITPEND 0x000FFC00 /* pending writes counter */ -+ -+#define ARM_ERRHALT HW_REGISTER_RW(ARM_BASE+0x448) -+#define ARM_EH_PERIBURST 0x00000001 /* Burst write seen on peri bus */ -+#define ARM_EH_ILLADDRS1 0x00000002 /* Address bits 25-27 error */ -+#define ARM_EH_ILLADDRS2 0x00000004 /* Address bits 31-28 error */ -+#define ARM_EH_VPU0HALT 0x00000008 /* VPU0 halted & in debug mode */ -+#define ARM_EH_VPU1HALT 0x00000010 /* VPU1 halted & in debug mode */ -+#define ARM_EH_ARMHALT 0x00000020 /* ARM in halted debug mode */ -+ -+#define ARM_ID_SECURE HW_REGISTER_RW(ARM_BASE+0x00C) -+#define ARM_ID HW_REGISTER_RW(ARM_BASE+0x44C) -+#define ARM_IDVAL 0x364D5241 -+ -+/* Translation memory */ -+#define ARM_TRANSLATE HW_REGISTER_RW(ARM_BASE+0x100) -+/* 32 locations: 0x100.. 0x17F */ -+/* 32 spare means we CAN go to 64 pages.... */ -+ -+ -+/* Interrupts */ -+#define ARM_IRQ_PEND0 HW_REGISTER_RW(ARM_BASE+0x200) /* Top IRQ bits */ -+#define ARM_I0_TIMER 0x00000001 /* timer IRQ */ -+#define ARM_I0_MAIL 0x00000002 /* Mail IRQ */ -+#define ARM_I0_BELL0 0x00000004 /* Doorbell 0 */ -+#define ARM_I0_BELL1 0x00000008 /* Doorbell 1 */ -+#define ARM_I0_BANK1 0x00000100 /* Bank1 IRQ */ -+#define ARM_I0_BANK2 0x00000200 /* Bank2 IRQ */ -+ -+#define ARM_IRQ_PEND1 HW_REGISTER_RW(ARM_BASE+0x204) /* All bank1 IRQ bits */ -+/* todo: all I1_interrupt sources */ -+#define ARM_IRQ_PEND2 HW_REGISTER_RW(ARM_BASE+0x208) /* All bank2 IRQ bits */ -+/* todo: all I2_interrupt sources */ -+ -+#define ARM_IRQ_FAST HW_REGISTER_RW(ARM_BASE+0x20C) /* FIQ control */ -+#define ARM_IF_INDEX 0x0000007F /* FIQ select */ -+#define ARM_IF_ENABLE 0x00000080 /* FIQ enable */ -+#define ARM_IF_VCMASK 0x0000003F /* FIQ = (index from VC source) */ -+#define ARM_IF_TIMER 0x00000040 /* FIQ = ARM timer */ -+#define ARM_IF_MAIL 0x00000041 /* FIQ = ARM Mail */ -+#define ARM_IF_BELL0 0x00000042 /* FIQ = ARM Doorbell 0 */ -+#define ARM_IF_BELL1 0x00000043 /* FIQ = ARM Doorbell 1 */ -+#define ARM_IF_VP0HALT 0x00000044 /* FIQ = VPU0 Halt seen */ -+#define ARM_IF_VP1HALT 0x00000045 /* FIQ = VPU1 Halt seen */ -+#define ARM_IF_ILLEGAL 0x00000046 /* FIQ = Illegal access seen */ -+ -+#define ARM_IRQ_ENBL1 HW_REGISTER_RW(ARM_BASE+0x210) /* Bank1 enable bits */ -+#define ARM_IRQ_ENBL2 HW_REGISTER_RW(ARM_BASE+0x214) /* Bank2 enable bits */ -+#define ARM_IRQ_ENBL3 HW_REGISTER_RW(ARM_BASE+0x218) /* ARM irqs enable bits */ -+#define ARM_IRQ_DIBL1 HW_REGISTER_RW(ARM_BASE+0x21C) /* Bank1 disable bits */ -+#define ARM_IRQ_DIBL2 HW_REGISTER_RW(ARM_BASE+0x220) /* Bank2 disable bits */ -+#define ARM_IRQ_DIBL3 HW_REGISTER_RW(ARM_BASE+0x224) /* ARM irqs disable bits */ -+#define ARM_IE_TIMER 0x00000001 /* Timer IRQ */ -+#define ARM_IE_MAIL 0x00000002 /* Mail IRQ */ -+#define ARM_IE_BELL0 0x00000004 /* Doorbell 0 */ -+#define ARM_IE_BELL1 0x00000008 /* Doorbell 1 */ -+#define ARM_IE_VP0HALT 0x00000010 /* VPU0 Halt */ -+#define ARM_IE_VP1HALT 0x00000020 /* VPU1 Halt */ -+#define ARM_IE_ILLEGAL 0x00000040 /* Illegal access seen */ -+ -+/* Timer */ -+/* For reg. fields see sp804 spec. */ -+#define ARM_T_LOAD HW_REGISTER_RW(ARM_BASE+0x400) -+#define ARM_T_VALUE HW_REGISTER_RW(ARM_BASE+0x404) -+#define ARM_T_CONTROL HW_REGISTER_RW(ARM_BASE+0x408) -+#define ARM_T_IRQCNTL HW_REGISTER_RW(ARM_BASE+0x40C) -+#define ARM_T_RAWIRQ HW_REGISTER_RW(ARM_BASE+0x410) -+#define ARM_T_MSKIRQ HW_REGISTER_RW(ARM_BASE+0x414) -+#define ARM_T_RELOAD HW_REGISTER_RW(ARM_BASE+0x418) -+#define ARM_T_PREDIV HW_REGISTER_RW(ARM_BASE+0x41c) -+#define ARM_T_FREECNT HW_REGISTER_RW(ARM_BASE+0x420) -+ -+#define TIMER_CTRL_ONESHOT (1 << 0) -+#define TIMER_CTRL_32BIT (1 << 1) -+#define TIMER_CTRL_DIV1 (0 << 2) -+#define TIMER_CTRL_DIV16 (1 << 2) -+#define TIMER_CTRL_DIV256 (2 << 2) -+#define TIMER_CTRL_IE (1 << 5) -+#define TIMER_CTRL_PERIODIC (1 << 6) -+#define TIMER_CTRL_ENABLE (1 << 7) -+#define TIMER_CTRL_DBGHALT (1 << 8) -+#define TIMER_CTRL_ENAFREE (1 << 9) -+#define TIMER_CTRL_FREEDIV_SHIFT 16) -+#define TIMER_CTRL_FREEDIV_MASK 0xff -+ -+/* Semaphores, Doorbells, Mailboxes */ -+#define ARM_SBM_OWN0 (ARM_BASE+0x800) -+#define ARM_SBM_OWN1 (ARM_BASE+0x900) -+#define ARM_SBM_OWN2 (ARM_BASE+0xA00) -+#define ARM_SBM_OWN3 (ARM_BASE+0xB00) -+ -+/* MAILBOXES -+ * Register flags are common across all -+ * owner registers. See end of this section -+ * -+ * Semaphores, Doorbells, Mailboxes Owner 0 -+ * -+ */ -+ -+#define ARM_0_SEMS HW_REGISTER_RW(ARM_SBM_OWN0+0x00) -+#define ARM_0_SEM0 HW_REGISTER_RW(ARM_SBM_OWN0+0x00) -+#define ARM_0_SEM1 HW_REGISTER_RW(ARM_SBM_OWN0+0x04) -+#define ARM_0_SEM2 HW_REGISTER_RW(ARM_SBM_OWN0+0x08) -+#define ARM_0_SEM3 HW_REGISTER_RW(ARM_SBM_OWN0+0x0C) -+#define ARM_0_SEM4 HW_REGISTER_RW(ARM_SBM_OWN0+0x10) -+#define ARM_0_SEM5 HW_REGISTER_RW(ARM_SBM_OWN0+0x14) -+#define ARM_0_SEM6 HW_REGISTER_RW(ARM_SBM_OWN0+0x18) -+#define ARM_0_SEM7 HW_REGISTER_RW(ARM_SBM_OWN0+0x1C) -+#define ARM_0_BELL0 HW_REGISTER_RW(ARM_SBM_OWN0+0x40) -+#define ARM_0_BELL1 HW_REGISTER_RW(ARM_SBM_OWN0+0x44) -+#define ARM_0_BELL2 HW_REGISTER_RW(ARM_SBM_OWN0+0x48) -+#define ARM_0_BELL3 HW_REGISTER_RW(ARM_SBM_OWN0+0x4C) -+/* MAILBOX 0 access in Owner 0 area */ -+/* Some addresses should ONLY be used by owner 0 */ -+#define ARM_0_MAIL0_WRT HW_REGISTER_RW(ARM_SBM_OWN0+0x80) /* .. 0x8C (4 locations) */ -+#define ARM_0_MAIL0_RD HW_REGISTER_RW(ARM_SBM_OWN0+0x80) /* .. 0x8C (4 locations) Normal read */ -+#define ARM_0_MAIL0_POL HW_REGISTER_RW(ARM_SBM_OWN0+0x90) /* none-pop read */ -+#define ARM_0_MAIL0_SND HW_REGISTER_RW(ARM_SBM_OWN0+0x94) /* Sender read (only LS 2 bits) */ -+#define ARM_0_MAIL0_STA HW_REGISTER_RW(ARM_SBM_OWN0+0x98) /* Status read */ -+#define ARM_0_MAIL0_CNF HW_REGISTER_RW(ARM_SBM_OWN0+0x9C) /* Config read/write */ -+/* MAILBOX 1 access in Owner 0 area */ -+/* Owner 0 should only WRITE to this mailbox */ -+#define ARM_0_MAIL1_WRT HW_REGISTER_RW(ARM_SBM_OWN0+0xA0) /* .. 0xAC (4 locations) */ -+/*#define ARM_0_MAIL1_RD HW_REGISTER_RW(ARM_SBM_OWN0+0xA0) */ /* DO NOT USE THIS !!!!! */ -+/*#define ARM_0_MAIL1_POL HW_REGISTER_RW(ARM_SBM_OWN0+0xB0) */ /* DO NOT USE THIS !!!!! */ -+/*#define ARM_0_MAIL1_SND HW_REGISTER_RW(ARM_SBM_OWN0+0xB4) */ /* DO NOT USE THIS !!!!! */ -+#define ARM_0_MAIL1_STA HW_REGISTER_RW(ARM_SBM_OWN0+0xB8) /* Status read */ -+/*#define ARM_0_MAIL1_CNF HW_REGISTER_RW(ARM_SBM_OWN0+0xBC) */ /* DO NOT USE THIS !!!!! */ -+/* General SEM, BELL, MAIL config/status */ -+#define ARM_0_SEMCLRDBG HW_REGISTER_RW(ARM_SBM_OWN0+0xE0) /* semaphore clear/debug register */ -+#define ARM_0_BELLCLRDBG HW_REGISTER_RW(ARM_SBM_OWN0+0xE4) /* Doorbells clear/debug register */ -+#define ARM_0_ALL_IRQS HW_REGISTER_RW(ARM_SBM_OWN0+0xF8) /* ALL interrupts */ -+#define ARM_0_MY_IRQS HW_REGISTER_RW(ARM_SBM_OWN0+0xFC) /* IRQS pending for owner 0 */ -+ -+/* Semaphores, Doorbells, Mailboxes Owner 1 */ -+#define ARM_1_SEMS HW_REGISTER_RW(ARM_SBM_OWN1+0x00) -+#define ARM_1_SEM0 HW_REGISTER_RW(ARM_SBM_OWN1+0x00) -+#define ARM_1_SEM1 HW_REGISTER_RW(ARM_SBM_OWN1+0x04) -+#define ARM_1_SEM2 HW_REGISTER_RW(ARM_SBM_OWN1+0x08) -+#define ARM_1_SEM3 HW_REGISTER_RW(ARM_SBM_OWN1+0x0C) -+#define ARM_1_SEM4 HW_REGISTER_RW(ARM_SBM_OWN1+0x10) -+#define ARM_1_SEM5 HW_REGISTER_RW(ARM_SBM_OWN1+0x14) -+#define ARM_1_SEM6 HW_REGISTER_RW(ARM_SBM_OWN1+0x18) -+#define ARM_1_SEM7 HW_REGISTER_RW(ARM_SBM_OWN1+0x1C) -+#define ARM_1_BELL0 HW_REGISTER_RW(ARM_SBM_OWN1+0x40) -+#define ARM_1_BELL1 HW_REGISTER_RW(ARM_SBM_OWN1+0x44) -+#define ARM_1_BELL2 HW_REGISTER_RW(ARM_SBM_OWN1+0x48) -+#define ARM_1_BELL3 HW_REGISTER_RW(ARM_SBM_OWN1+0x4C) -+/* MAILBOX 0 access in Owner 0 area */ -+/* Owner 1 should only WRITE to this mailbox */ -+#define ARM_1_MAIL0_WRT HW_REGISTER_RW(ARM_SBM_OWN1+0x80) /* .. 0x8C (4 locations) */ -+/*#define ARM_1_MAIL0_RD HW_REGISTER_RW(ARM_SBM_OWN1+0x80) */ /* DO NOT USE THIS !!!!! */ -+/*#define ARM_1_MAIL0_POL HW_REGISTER_RW(ARM_SBM_OWN1+0x90) */ /* DO NOT USE THIS !!!!! */ -+/*#define ARM_1_MAIL0_SND HW_REGISTER_RW(ARM_SBM_OWN1+0x94) */ /* DO NOT USE THIS !!!!! */ -+#define ARM_1_MAIL0_STA HW_REGISTER_RW(ARM_SBM_OWN1+0x98) /* Status read */ -+/*#define ARM_1_MAIL0_CNF HW_REGISTER_RW(ARM_SBM_OWN1+0x9C) */ /* DO NOT USE THIS !!!!! */ -+/* MAILBOX 1 access in Owner 0 area */ -+#define ARM_1_MAIL1_WRT HW_REGISTER_RW(ARM_SBM_OWN1+0xA0) /* .. 0xAC (4 locations) */ -+#define ARM_1_MAIL1_RD HW_REGISTER_RW(ARM_SBM_OWN1+0xA0) /* .. 0xAC (4 locations) Normal read */ -+#define ARM_1_MAIL1_POL HW_REGISTER_RW(ARM_SBM_OWN1+0xB0) /* none-pop read */ -+#define ARM_1_MAIL1_SND HW_REGISTER_RW(ARM_SBM_OWN1+0xB4) /* Sender read (only LS 2 bits) */ -+#define ARM_1_MAIL1_STA HW_REGISTER_RW(ARM_SBM_OWN1+0xB8) /* Status read */ -+#define ARM_1_MAIL1_CNF HW_REGISTER_RW(ARM_SBM_OWN1+0xBC) -+/* General SEM, BELL, MAIL config/status */ -+#define ARM_1_SEMCLRDBG HW_REGISTER_RW(ARM_SBM_OWN1+0xE0) /* semaphore clear/debug register */ -+#define ARM_1_BELLCLRDBG HW_REGISTER_RW(ARM_SBM_OWN1+0xE4) /* Doorbells clear/debug register */ -+#define ARM_1_MY_IRQS HW_REGISTER_RW(ARM_SBM_OWN1+0xFC) /* IRQS pending for owner 1 */ -+#define ARM_1_ALL_IRQS HW_REGISTER_RW(ARM_SBM_OWN1+0xF8) /* ALL interrupts */ -+ -+/* Semaphores, Doorbells, Mailboxes Owner 2 */ -+#define ARM_2_SEMS HW_REGISTER_RW(ARM_SBM_OWN2+0x00) -+#define ARM_2_SEM0 HW_REGISTER_RW(ARM_SBM_OWN2+0x00) -+#define ARM_2_SEM1 HW_REGISTER_RW(ARM_SBM_OWN2+0x04) -+#define ARM_2_SEM2 HW_REGISTER_RW(ARM_SBM_OWN2+0x08) -+#define ARM_2_SEM3 HW_REGISTER_RW(ARM_SBM_OWN2+0x0C) -+#define ARM_2_SEM4 HW_REGISTER_RW(ARM_SBM_OWN2+0x10) -+#define ARM_2_SEM5 HW_REGISTER_RW(ARM_SBM_OWN2+0x14) -+#define ARM_2_SEM6 HW_REGISTER_RW(ARM_SBM_OWN2+0x18) -+#define ARM_2_SEM7 HW_REGISTER_RW(ARM_SBM_OWN2+0x1C) -+#define ARM_2_BELL0 HW_REGISTER_RW(ARM_SBM_OWN2+0x40) -+#define ARM_2_BELL1 HW_REGISTER_RW(ARM_SBM_OWN2+0x44) -+#define ARM_2_BELL2 HW_REGISTER_RW(ARM_SBM_OWN2+0x48) -+#define ARM_2_BELL3 HW_REGISTER_RW(ARM_SBM_OWN2+0x4C) -+/* MAILBOX 0 access in Owner 2 area */ -+/* Owner 2 should only WRITE to this mailbox */ -+#define ARM_2_MAIL0_WRT HW_REGISTER_RW(ARM_SBM_OWN2+0x80) /* .. 0x8C (4 locations) */ -+/*#define ARM_2_MAIL0_RD HW_REGISTER_RW(ARM_SBM_OWN2+0x80) */ /* DO NOT USE THIS !!!!! */ -+/*#define ARM_2_MAIL0_POL HW_REGISTER_RW(ARM_SBM_OWN2+0x90) */ /* DO NOT USE THIS !!!!! */ -+/*#define ARM_2_MAIL0_SND HW_REGISTER_RW(ARM_SBM_OWN2+0x94) */ /* DO NOT USE THIS !!!!! */ -+#define ARM_2_MAIL0_STA HW_REGISTER_RW(ARM_SBM_OWN2+0x98) /* Status read */ -+/*#define ARM_2_MAIL0_CNF HW_REGISTER_RW(ARM_SBM_OWN2+0x9C) */ /* DO NOT USE THIS !!!!! */ -+/* MAILBOX 1 access in Owner 2 area */ -+/* Owner 2 should only WRITE to this mailbox */ -+#define ARM_2_MAIL1_WRT HW_REGISTER_RW(ARM_SBM_OWN2+0xA0) /* .. 0xAC (4 locations) */ -+/*#define ARM_2_MAIL1_RD HW_REGISTER_RW(ARM_SBM_OWN2+0xA0) */ /* DO NOT USE THIS !!!!! */ -+/*#define ARM_2_MAIL1_POL HW_REGISTER_RW(ARM_SBM_OWN2+0xB0) */ /* DO NOT USE THIS !!!!! */ -+/*#define ARM_2_MAIL1_SND HW_REGISTER_RW(ARM_SBM_OWN2+0xB4) */ /* DO NOT USE THIS !!!!! */ -+#define ARM_2_MAIL1_STA HW_REGISTER_RW(ARM_SBM_OWN2+0xB8) /* Status read */ -+/*#define ARM_2_MAIL1_CNF HW_REGISTER_RW(ARM_SBM_OWN2+0xBC) */ /* DO NOT USE THIS !!!!! */ -+/* General SEM, BELL, MAIL config/status */ -+#define ARM_2_SEMCLRDBG HW_REGISTER_RW(ARM_SBM_OWN2+0xE0) /* semaphore clear/debug register */ -+#define ARM_2_BELLCLRDBG HW_REGISTER_RW(ARM_SBM_OWN2+0xE4) /* Doorbells clear/debug register */ -+#define ARM_2_MY_IRQS HW_REGISTER_RW(ARM_SBM_OWN2+0xFC) /* IRQS pending for owner 2 */ -+#define ARM_2_ALL_IRQS HW_REGISTER_RW(ARM_SBM_OWN2+0xF8) /* ALL interrupts */ -+ -+/* Semaphores, Doorbells, Mailboxes Owner 3 */ -+#define ARM_3_SEMS HW_REGISTER_RW(ARM_SBM_OWN3+0x00) -+#define ARM_3_SEM0 HW_REGISTER_RW(ARM_SBM_OWN3+0x00) -+#define ARM_3_SEM1 HW_REGISTER_RW(ARM_SBM_OWN3+0x04) -+#define ARM_3_SEM2 HW_REGISTER_RW(ARM_SBM_OWN3+0x08) -+#define ARM_3_SEM3 HW_REGISTER_RW(ARM_SBM_OWN3+0x0C) -+#define ARM_3_SEM4 HW_REGISTER_RW(ARM_SBM_OWN3+0x10) -+#define ARM_3_SEM5 HW_REGISTER_RW(ARM_SBM_OWN3+0x14) -+#define ARM_3_SEM6 HW_REGISTER_RW(ARM_SBM_OWN3+0x18) -+#define ARM_3_SEM7 HW_REGISTER_RW(ARM_SBM_OWN3+0x1C) -+#define ARM_3_BELL0 HW_REGISTER_RW(ARM_SBM_OWN3+0x40) -+#define ARM_3_BELL1 HW_REGISTER_RW(ARM_SBM_OWN3+0x44) -+#define ARM_3_BELL2 HW_REGISTER_RW(ARM_SBM_OWN3+0x48) -+#define ARM_3_BELL3 HW_REGISTER_RW(ARM_SBM_OWN3+0x4C) -+/* MAILBOX 0 access in Owner 3 area */ -+/* Owner 3 should only WRITE to this mailbox */ -+#define ARM_3_MAIL0_WRT HW_REGISTER_RW(ARM_SBM_OWN3+0x80) /* .. 0x8C (4 locations) */ -+/*#define ARM_3_MAIL0_RD HW_REGISTER_RW(ARM_SBM_OWN3+0x80) */ /* DO NOT USE THIS !!!!! */ -+/*#define ARM_3_MAIL0_POL HW_REGISTER_RW(ARM_SBM_OWN3+0x90) */ /* DO NOT USE THIS !!!!! */ -+/*#define ARM_3_MAIL0_SND HW_REGISTER_RW(ARM_SBM_OWN3+0x94) */ /* DO NOT USE THIS !!!!! */ -+#define ARM_3_MAIL0_STA HW_REGISTER_RW(ARM_SBM_OWN3+0x98) /* Status read */ -+/*#define ARM_3_MAIL0_CNF HW_REGISTER_RW(ARM_SBM_OWN3+0x9C) */ /* DO NOT USE THIS !!!!! */ -+/* MAILBOX 1 access in Owner 3 area */ -+/* Owner 3 should only WRITE to this mailbox */ -+#define ARM_3_MAIL1_WRT HW_REGISTER_RW(ARM_SBM_OWN3+0xA0) /* .. 0xAC (4 locations) */ -+/*#define ARM_3_MAIL1_RD HW_REGISTER_RW(ARM_SBM_OWN3+0xA0) */ /* DO NOT USE THIS !!!!! */ -+/*#define ARM_3_MAIL1_POL HW_REGISTER_RW(ARM_SBM_OWN3+0xB0) */ /* DO NOT USE THIS !!!!! */ -+/*#define ARM_3_MAIL1_SND HW_REGISTER_RW(ARM_SBM_OWN3+0xB4) */ /* DO NOT USE THIS !!!!! */ -+#define ARM_3_MAIL1_STA HW_REGISTER_RW(ARM_SBM_OWN3+0xB8) /* Status read */ -+/*#define ARM_3_MAIL1_CNF HW_REGISTER_RW(ARM_SBM_OWN3+0xBC) */ /* DO NOT USE THIS !!!!! */ -+/* General SEM, BELL, MAIL config/status */ -+#define ARM_3_SEMCLRDBG HW_REGISTER_RW(ARM_SBM_OWN3+0xE0) /* semaphore clear/debug register */ -+#define ARM_3_BELLCLRDBG HW_REGISTER_RW(ARM_SBM_OWN3+0xE4) /* Doorbells clear/debug register */ -+#define ARM_3_MY_IRQS HW_REGISTER_RW(ARM_SBM_OWN3+0xFC) /* IRQS pending for owner 3 */ -+#define ARM_3_ALL_IRQS HW_REGISTER_RW(ARM_SBM_OWN3+0xF8) /* ALL interrupts */ -+ -+ -+ -+/* Mailbox flags. Valid for all owners */ -+ -+/* Mailbox status register (...0x98) */ -+#define ARM_MS_FULL 0x80000000 -+#define ARM_MS_EMPTY 0x40000000 -+#define ARM_MS_LEVEL 0x400000FF /* Max. value depdnds on mailbox depth parameter */ -+ -+/* MAILBOX config/status register (...0x9C) */ -+/* ANY write to this register clears the error bits! */ -+#define ARM_MC_IHAVEDATAIRQEN 0x00000001 /* mailbox irq enable: has data */ -+#define ARM_MC_IHAVESPACEIRQEN 0x00000002 /* mailbox irq enable: has space */ -+#define ARM_MC_OPPISEMPTYIRQEN 0x00000004 /* mailbox irq enable: Opp. is empty */ -+#define ARM_MC_MAIL_CLEAR 0x00000008 /* mailbox clear write 1, then 0 */ -+#define ARM_MC_IHAVEDATAIRQPEND 0x00000010 /* mailbox irq pending: has space */ -+#define ARM_MC_IHAVESPACEIRQPEND 0x00000020 /* mailbox irq pending: Opp. is empty */ -+#define ARM_MC_OPPISEMPTYIRQPEND 0x00000040 /* mailbox irq pending */ -+/* Bit 7 is unused */ -+#define ARM_MC_ERRNOOWN 0x00000100 /* error : none owner read from mailbox */ -+#define ARM_MC_ERROVERFLW 0x00000200 /* error : write to fill mailbox */ -+#define ARM_MC_ERRUNDRFLW 0x00000400 /* error : read from empty mailbox */ -+ -+/* Semaphore clear/debug register (...0xE0) */ -+#define ARM_SD_OWN0 0x00000003 /* Owner of sem 0 */ -+#define ARM_SD_OWN1 0x0000000C /* Owner of sem 1 */ -+#define ARM_SD_OWN2 0x00000030 /* Owner of sem 2 */ -+#define ARM_SD_OWN3 0x000000C0 /* Owner of sem 3 */ -+#define ARM_SD_OWN4 0x00000300 /* Owner of sem 4 */ -+#define ARM_SD_OWN5 0x00000C00 /* Owner of sem 5 */ -+#define ARM_SD_OWN6 0x00003000 /* Owner of sem 6 */ -+#define ARM_SD_OWN7 0x0000C000 /* Owner of sem 7 */ -+#define ARM_SD_SEM0 0x00010000 /* Status of sem 0 */ -+#define ARM_SD_SEM1 0x00020000 /* Status of sem 1 */ -+#define ARM_SD_SEM2 0x00040000 /* Status of sem 2 */ -+#define ARM_SD_SEM3 0x00080000 /* Status of sem 3 */ -+#define ARM_SD_SEM4 0x00100000 /* Status of sem 4 */ -+#define ARM_SD_SEM5 0x00200000 /* Status of sem 5 */ -+#define ARM_SD_SEM6 0x00400000 /* Status of sem 6 */ -+#define ARM_SD_SEM7 0x00800000 /* Status of sem 7 */ -+ -+/* Doorbells clear/debug register (...0xE4) */ -+#define ARM_BD_OWN0 0x00000003 /* Owner of doorbell 0 */ -+#define ARM_BD_OWN1 0x0000000C /* Owner of doorbell 1 */ -+#define ARM_BD_OWN2 0x00000030 /* Owner of doorbell 2 */ -+#define ARM_BD_OWN3 0x000000C0 /* Owner of doorbell 3 */ -+#define ARM_BD_BELL0 0x00000100 /* Status of doorbell 0 */ -+#define ARM_BD_BELL1 0x00000200 /* Status of doorbell 1 */ -+#define ARM_BD_BELL2 0x00000400 /* Status of doorbell 2 */ -+#define ARM_BD_BELL3 0x00000800 /* Status of doorbell 3 */ -+ -+/* MY IRQS register (...0xF8) */ -+#define ARM_MYIRQ_BELL 0x00000001 /* This owner has a doorbell IRQ */ -+#define ARM_MYIRQ_MAIL 0x00000002 /* This owner has a mailbox IRQ */ -+ -+/* ALL IRQS register (...0xF8) */ -+#define ARM_AIS_BELL0 0x00000001 /* Doorbell 0 IRQ pending */ -+#define ARM_AIS_BELL1 0x00000002 /* Doorbell 1 IRQ pending */ -+#define ARM_AIS_BELL2 0x00000004 /* Doorbell 2 IRQ pending */ -+#define ARM_AIS_BELL3 0x00000008 /* Doorbell 3 IRQ pending */ -+#define ARM_AIS0_HAVEDATA 0x00000010 /* MAIL 0 has data IRQ pending */ -+#define ARM_AIS0_HAVESPAC 0x00000020 /* MAIL 0 has space IRQ pending */ -+#define ARM_AIS0_OPPEMPTY 0x00000040 /* MAIL 0 opposite is empty IRQ */ -+#define ARM_AIS1_HAVEDATA 0x00000080 /* MAIL 1 has data IRQ pending */ -+#define ARM_AIS1_HAVESPAC 0x00000100 /* MAIL 1 has space IRQ pending */ -+#define ARM_AIS1_OPPEMPTY 0x00000200 /* MAIL 1 opposite is empty IRQ */ -+/* Note that bell-0, bell-1 and MAIL0 IRQ go only to the ARM */ -+/* Whilst that bell-2, bell-3 and MAIL1 IRQ go only to the VC */ -+/* */ -+/* ARM JTAG BASH */ -+/* */ -+#define AJB_BASE 0x7e2000c0 -+ -+#define AJBCONF HW_REGISTER_RW(AJB_BASE+0x00) -+#define AJB_BITS0 0x000000 -+#define AJB_BITS4 0x000004 -+#define AJB_BITS8 0x000008 -+#define AJB_BITS12 0x00000C -+#define AJB_BITS16 0x000010 -+#define AJB_BITS20 0x000014 -+#define AJB_BITS24 0x000018 -+#define AJB_BITS28 0x00001C -+#define AJB_BITS32 0x000020 -+#define AJB_BITS34 0x000022 -+#define AJB_OUT_MS 0x000040 -+#define AJB_OUT_LS 0x000000 -+#define AJB_INV_CLK 0x000080 -+#define AJB_D0_RISE 0x000100 -+#define AJB_D0_FALL 0x000000 -+#define AJB_D1_RISE 0x000200 -+#define AJB_D1_FALL 0x000000 -+#define AJB_IN_RISE 0x000400 -+#define AJB_IN_FALL 0x000000 -+#define AJB_ENABLE 0x000800 -+#define AJB_HOLD0 0x000000 -+#define AJB_HOLD1 0x001000 -+#define AJB_HOLD2 0x002000 -+#define AJB_HOLD3 0x003000 -+#define AJB_RESETN 0x004000 -+#define AJB_CLKSHFT 16 -+#define AJB_BUSY 0x80000000 -+#define AJBTMS HW_REGISTER_RW(AJB_BASE+0x04) -+#define AJBTDI HW_REGISTER_RW(AJB_BASE+0x08) -+#define AJBTDO HW_REGISTER_RW(AJB_BASE+0x0c) -+ -+#endif ---- /dev/null -+++ b/arch/arm/mach-bcm2708/include/mach/clkdev.h -@@ -0,0 +1,7 @@ -+#ifndef __ASM_MACH_CLKDEV_H -+#define __ASM_MACH_CLKDEV_H -+ -+#define __clk_get(clk) ({ 1; }) -+#define __clk_put(clk) do { } while (0) -+ -+#endif ---- /dev/null -+++ b/arch/arm/mach-bcm2708/include/mach/debug-macro.S -@@ -0,0 +1,22 @@ -+/* arch/arm/mach-bcm2708/include/mach/debug-macro.S -+ * -+ * Debugging macro include header -+ * -+ * Copyright (C) 2010 Broadcom -+ * Copyright (C) 1994-1999 Russell King -+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+*/ -+ -+#include <mach/platform.h> -+ -+ .macro addruart, rp, rv, tmp -+ ldr \rp, =UART0_BASE -+ ldr \rv, =IO_ADDRESS(UART0_BASE) -+ .endm -+ -+#include <debug/pl01x.S> ---- /dev/null -+++ b/arch/arm/mach-bcm2708/include/mach/entry-macro.S -@@ -0,0 +1,69 @@ -+/* -+ * arch/arm/mach-bcm2708/include/mach/entry-macro.S -+ * -+ * Low-level IRQ helper macros for BCM2708 platforms -+ * -+ * Copyright (C) 2010 Broadcom -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+#include <mach/hardware.h> -+ -+ .macro disable_fiq -+ .endm -+ -+ .macro get_irqnr_preamble, base, tmp -+ ldr \base, =IO_ADDRESS(ARMCTRL_IC_BASE) -+ .endm -+ -+ .macro arch_ret_to_user, tmp1, tmp2 -+ .endm -+ -+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp -+ /* get masked status */ -+ ldr \irqstat, [\base, #(ARM_IRQ_PEND0 - ARMCTRL_IC_BASE)] -+ mov \irqnr, #(ARM_IRQ0_BASE + 31) -+ and \tmp, \irqstat, #0x300 @ save bits 8 and 9 -+ /* clear bits 8 and 9, and test */ -+ bics \irqstat, \irqstat, #0x300 -+ bne 1010f -+ -+ tst \tmp, #0x100 -+ ldrne \irqstat, [\base, #(ARM_IRQ_PEND1 - ARMCTRL_IC_BASE)] -+ movne \irqnr, #(ARM_IRQ1_BASE + 31) -+ @ Mask out the interrupts also present in PEND0 - see SW-5809 -+ bicne \irqstat, #((1<<7) | (1<<9) | (1<<10)) -+ bicne \irqstat, #((1<<18) | (1<<19)) -+ bne 1010f -+ -+ tst \tmp, #0x200 -+ ldrne \irqstat, [\base, #(ARM_IRQ_PEND2 - ARMCTRL_IC_BASE)] -+ movne \irqnr, #(ARM_IRQ2_BASE + 31) -+ @ Mask out the interrupts also present in PEND0 - see SW-5809 -+ bicne \irqstat, #((1<<21) | (1<<22) | (1<<23) | (1<<24) | (1<<25)) -+ bicne \irqstat, #((1<<30)) -+ beq 1020f -+ -+1010: -+ @ For non-zero x, LSB(x) = 31 - CLZ(x^(x-1)) -+ @ N.B. CLZ is an ARM5 instruction. -+ sub \tmp, \irqstat, #1 -+ eor \irqstat, \irqstat, \tmp -+ clz \tmp, \irqstat -+ sub \irqnr, \tmp -+ -+1020: @ EQ will be set if no irqs pending -+ -+ .endm ---- /dev/null -+++ b/arch/arm/mach-bcm2708/include/mach/frc.h -@@ -0,0 +1,38 @@ -+/* -+ * arch/arm/mach-bcm2708/include/mach/timex.h -+ * -+ * BCM2708 free running counter (timer) -+ * -+ * Copyright (C) 2010 Broadcom -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+ -+#ifndef _MACH_FRC_H -+#define _MACH_FRC_H -+ -+#define FRC_TICK_RATE (1000000) -+ -+/*! Free running counter incrementing at the CLOCK_TICK_RATE -+ (slightly faster than frc_clock_ticks63() -+ */ -+extern unsigned long frc_clock_ticks32(void); -+ -+/*! Free running counter incrementing at the CLOCK_TICK_RATE -+ * Note - top bit should be ignored (see cnt32_to_63) -+ */ -+extern unsigned long long frc_clock_ticks63(void); -+ -+#endif ---- /dev/null -+++ b/arch/arm/mach-bcm2708/include/mach/hardware.h -@@ -0,0 +1,28 @@ -+/* -+ * arch/arm/mach-bcm2708/include/mach/hardware.h -+ * -+ * This file contains the hardware definitions of the BCM2708 devices. -+ * -+ * Copyright (C) 2010 Broadcom -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+#ifndef __ASM_ARCH_HARDWARE_H -+#define __ASM_ARCH_HARDWARE_H -+ -+#include <asm/sizes.h> -+#include <mach/platform.h> -+ -+#endif ---- /dev/null -+++ b/arch/arm/mach-bcm2708/include/mach/io.h -@@ -0,0 +1,27 @@ -+/* -+ * arch/arm/mach-bcm2708/include/mach/io.h -+ * -+ * Copyright (C) 2003 ARM Limited -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+#ifndef __ASM_ARM_ARCH_IO_H -+#define __ASM_ARM_ARCH_IO_H -+ -+#define IO_SPACE_LIMIT 0xffffffff -+ -+#define __io(a) __typesafe_io(a) -+ -+#endif ---- /dev/null -+++ b/arch/arm/mach-bcm2708/include/mach/irqs.h -@@ -0,0 +1,196 @@ -+/* -+ * arch/arm/mach-bcm2708/include/mach/irqs.h -+ * -+ * Copyright (C) 2010 Broadcom -+ * Copyright (C) 2003 ARM Limited -+ * Copyright (C) 2000 Deep Blue Solutions Ltd. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+ -+#ifndef _BCM2708_IRQS_H_ -+#define _BCM2708_IRQS_H_ -+ -+#include <mach/platform.h> -+ -+/* -+ * IRQ interrupts definitions are the same as the INT definitions -+ * held within platform.h -+ */ -+#define IRQ_ARMCTRL_START 0 -+#define IRQ_TIMER0 (IRQ_ARMCTRL_START + INTERRUPT_TIMER0) -+#define IRQ_TIMER1 (IRQ_ARMCTRL_START + INTERRUPT_TIMER1) -+#define IRQ_TIMER2 (IRQ_ARMCTRL_START + INTERRUPT_TIMER2) -+#define IRQ_TIMER3 (IRQ_ARMCTRL_START + INTERRUPT_TIMER3) -+#define IRQ_CODEC0 (IRQ_ARMCTRL_START + INTERRUPT_CODEC0) -+#define IRQ_CODEC1 (IRQ_ARMCTRL_START + INTERRUPT_CODEC1) -+#define IRQ_CODEC2 (IRQ_ARMCTRL_START + INTERRUPT_CODEC2) -+#define IRQ_JPEG (IRQ_ARMCTRL_START + INTERRUPT_JPEG) -+#define IRQ_ISP (IRQ_ARMCTRL_START + INTERRUPT_ISP) -+#define IRQ_USB (IRQ_ARMCTRL_START + INTERRUPT_USB) -+#define IRQ_3D (IRQ_ARMCTRL_START + INTERRUPT_3D) -+#define IRQ_TRANSPOSER (IRQ_ARMCTRL_START + INTERRUPT_TRANSPOSER) -+#define IRQ_MULTICORESYNC0 (IRQ_ARMCTRL_START + INTERRUPT_MULTICORESYNC0) -+#define IRQ_MULTICORESYNC1 (IRQ_ARMCTRL_START + INTERRUPT_MULTICORESYNC1) -+#define IRQ_MULTICORESYNC2 (IRQ_ARMCTRL_START + INTERRUPT_MULTICORESYNC2) -+#define IRQ_MULTICORESYNC3 (IRQ_ARMCTRL_START + INTERRUPT_MULTICORESYNC3) -+#define IRQ_DMA0 (IRQ_ARMCTRL_START + INTERRUPT_DMA0) -+#define IRQ_DMA1 (IRQ_ARMCTRL_START + INTERRUPT_DMA1) -+#define IRQ_DMA2 (IRQ_ARMCTRL_START + INTERRUPT_DMA2) -+#define IRQ_DMA3 (IRQ_ARMCTRL_START + INTERRUPT_DMA3) -+#define IRQ_DMA4 (IRQ_ARMCTRL_START + INTERRUPT_DMA4) -+#define IRQ_DMA5 (IRQ_ARMCTRL_START + INTERRUPT_DMA5) -+#define IRQ_DMA6 (IRQ_ARMCTRL_START + INTERRUPT_DMA6) -+#define IRQ_DMA7 (IRQ_ARMCTRL_START + INTERRUPT_DMA7) -+#define IRQ_DMA8 (IRQ_ARMCTRL_START + INTERRUPT_DMA8) -+#define IRQ_DMA9 (IRQ_ARMCTRL_START + INTERRUPT_DMA9) -+#define IRQ_DMA10 (IRQ_ARMCTRL_START + INTERRUPT_DMA10) -+#define IRQ_DMA11 (IRQ_ARMCTRL_START + INTERRUPT_DMA11) -+#define IRQ_DMA12 (IRQ_ARMCTRL_START + INTERRUPT_DMA12) -+#define IRQ_AUX (IRQ_ARMCTRL_START + INTERRUPT_AUX) -+#define IRQ_ARM (IRQ_ARMCTRL_START + INTERRUPT_ARM) -+#define IRQ_VPUDMA (IRQ_ARMCTRL_START + INTERRUPT_VPUDMA) -+#define IRQ_HOSTPORT (IRQ_ARMCTRL_START + INTERRUPT_HOSTPORT) -+#define IRQ_VIDEOSCALER (IRQ_ARMCTRL_START + INTERRUPT_VIDEOSCALER) -+#define IRQ_CCP2TX (IRQ_ARMCTRL_START + INTERRUPT_CCP2TX) -+#define IRQ_SDC (IRQ_ARMCTRL_START + INTERRUPT_SDC) -+#define IRQ_DSI0 (IRQ_ARMCTRL_START + INTERRUPT_DSI0) -+#define IRQ_AVE (IRQ_ARMCTRL_START + INTERRUPT_AVE) -+#define IRQ_CAM0 (IRQ_ARMCTRL_START + INTERRUPT_CAM0) -+#define IRQ_CAM1 (IRQ_ARMCTRL_START + INTERRUPT_CAM1) -+#define IRQ_HDMI0 (IRQ_ARMCTRL_START + INTERRUPT_HDMI0) -+#define IRQ_HDMI1 (IRQ_ARMCTRL_START + INTERRUPT_HDMI1) -+#define IRQ_PIXELVALVE1 (IRQ_ARMCTRL_START + INTERRUPT_PIXELVALVE1) -+#define IRQ_I2CSPISLV (IRQ_ARMCTRL_START + INTERRUPT_I2CSPISLV) -+#define IRQ_DSI1 (IRQ_ARMCTRL_START + INTERRUPT_DSI1) -+#define IRQ_PWA0 (IRQ_ARMCTRL_START + INTERRUPT_PWA0) -+#define IRQ_PWA1 (IRQ_ARMCTRL_START + INTERRUPT_PWA1) -+#define IRQ_CPR (IRQ_ARMCTRL_START + INTERRUPT_CPR) -+#define IRQ_SMI (IRQ_ARMCTRL_START + INTERRUPT_SMI) -+#define IRQ_GPIO0 (IRQ_ARMCTRL_START + INTERRUPT_GPIO0) -+#define IRQ_GPIO1 (IRQ_ARMCTRL_START + INTERRUPT_GPIO1) -+#define IRQ_GPIO2 (IRQ_ARMCTRL_START + INTERRUPT_GPIO2) -+#define IRQ_GPIO3 (IRQ_ARMCTRL_START + INTERRUPT_GPIO3) -+#define IRQ_I2C (IRQ_ARMCTRL_START + INTERRUPT_I2C) -+#define IRQ_SPI (IRQ_ARMCTRL_START + INTERRUPT_SPI) -+#define IRQ_I2SPCM (IRQ_ARMCTRL_START + INTERRUPT_I2SPCM) -+#define IRQ_SDIO (IRQ_ARMCTRL_START + INTERRUPT_SDIO) -+#define IRQ_UART (IRQ_ARMCTRL_START + INTERRUPT_UART) -+#define IRQ_SLIMBUS (IRQ_ARMCTRL_START + INTERRUPT_SLIMBUS) -+#define IRQ_VEC (IRQ_ARMCTRL_START + INTERRUPT_VEC) -+#define IRQ_CPG (IRQ_ARMCTRL_START + INTERRUPT_CPG) -+#define IRQ_RNG (IRQ_ARMCTRL_START + INTERRUPT_RNG) -+#define IRQ_ARASANSDIO (IRQ_ARMCTRL_START + INTERRUPT_ARASANSDIO) -+#define IRQ_AVSPMON (IRQ_ARMCTRL_START + INTERRUPT_AVSPMON) -+ -+#define IRQ_ARM_TIMER (IRQ_ARMCTRL_START + INTERRUPT_ARM_TIMER) -+#define IRQ_ARM_MAILBOX (IRQ_ARMCTRL_START + INTERRUPT_ARM_MAILBOX) -+#define IRQ_ARM_DOORBELL_0 (IRQ_ARMCTRL_START + INTERRUPT_ARM_DOORBELL_0) -+#define IRQ_ARM_DOORBELL_1 (IRQ_ARMCTRL_START + INTERRUPT_ARM_DOORBELL_1) -+#define IRQ_VPU0_HALTED (IRQ_ARMCTRL_START + INTERRUPT_VPU0_HALTED) -+#define IRQ_VPU1_HALTED (IRQ_ARMCTRL_START + INTERRUPT_VPU1_HALTED) -+#define IRQ_ILLEGAL_TYPE0 (IRQ_ARMCTRL_START + INTERRUPT_ILLEGAL_TYPE0) -+#define IRQ_ILLEGAL_TYPE1 (IRQ_ARMCTRL_START + INTERRUPT_ILLEGAL_TYPE1) -+#define IRQ_PENDING1 (IRQ_ARMCTRL_START + INTERRUPT_PENDING1) -+#define IRQ_PENDING2 (IRQ_ARMCTRL_START + INTERRUPT_PENDING2) -+ -+/* -+ * FIQ interrupts definitions are the same as the INT definitions. -+ */ -+#define FIQ_TIMER0 INT_TIMER0 -+#define FIQ_TIMER1 INT_TIMER1 -+#define FIQ_TIMER2 INT_TIMER2 -+#define FIQ_TIMER3 INT_TIMER3 -+#define FIQ_CODEC0 INT_CODEC0 -+#define FIQ_CODEC1 INT_CODEC1 -+#define FIQ_CODEC2 INT_CODEC2 -+#define FIQ_JPEG INT_JPEG -+#define FIQ_ISP INT_ISP -+#define FIQ_USB INT_USB -+#define FIQ_3D INT_3D -+#define FIQ_TRANSPOSER INT_TRANSPOSER -+#define FIQ_MULTICORESYNC0 INT_MULTICORESYNC0 -+#define FIQ_MULTICORESYNC1 INT_MULTICORESYNC1 -+#define FIQ_MULTICORESYNC2 INT_MULTICORESYNC2 -+#define FIQ_MULTICORESYNC3 INT_MULTICORESYNC3 -+#define FIQ_DMA0 INT_DMA0 -+#define FIQ_DMA1 INT_DMA1 -+#define FIQ_DMA2 INT_DMA2 -+#define FIQ_DMA3 INT_DMA3 -+#define FIQ_DMA4 INT_DMA4 -+#define FIQ_DMA5 INT_DMA5 -+#define FIQ_DMA6 INT_DMA6 -+#define FIQ_DMA7 INT_DMA7 -+#define FIQ_DMA8 INT_DMA8 -+#define FIQ_DMA9 INT_DMA9 -+#define FIQ_DMA10 INT_DMA10 -+#define FIQ_DMA11 INT_DMA11 -+#define FIQ_DMA12 INT_DMA12 -+#define FIQ_AUX INT_AUX -+#define FIQ_ARM INT_ARM -+#define FIQ_VPUDMA INT_VPUDMA -+#define FIQ_HOSTPORT INT_HOSTPORT -+#define FIQ_VIDEOSCALER INT_VIDEOSCALER -+#define FIQ_CCP2TX INT_CCP2TX -+#define FIQ_SDC INT_SDC -+#define FIQ_DSI0 INT_DSI0 -+#define FIQ_AVE INT_AVE -+#define FIQ_CAM0 INT_CAM0 -+#define FIQ_CAM1 INT_CAM1 -+#define FIQ_HDMI0 INT_HDMI0 -+#define FIQ_HDMI1 INT_HDMI1 -+#define FIQ_PIXELVALVE1 INT_PIXELVALVE1 -+#define FIQ_I2CSPISLV INT_I2CSPISLV -+#define FIQ_DSI1 INT_DSI1 -+#define FIQ_PWA0 INT_PWA0 -+#define FIQ_PWA1 INT_PWA1 -+#define FIQ_CPR INT_CPR -+#define FIQ_SMI INT_SMI -+#define FIQ_GPIO0 INT_GPIO0 -+#define FIQ_GPIO1 INT_GPIO1 -+#define FIQ_GPIO2 INT_GPIO2 -+#define FIQ_GPIO3 INT_GPIO3 -+#define FIQ_I2C INT_I2C -+#define FIQ_SPI INT_SPI -+#define FIQ_I2SPCM INT_I2SPCM -+#define FIQ_SDIO INT_SDIO -+#define FIQ_UART INT_UART -+#define FIQ_SLIMBUS INT_SLIMBUS -+#define FIQ_VEC INT_VEC -+#define FIQ_CPG INT_CPG -+#define FIQ_RNG INT_RNG -+#define FIQ_ARASANSDIO INT_ARASANSDIO -+#define FIQ_AVSPMON INT_AVSPMON -+ -+#define FIQ_ARM_TIMER INT_ARM_TIMER -+#define FIQ_ARM_MAILBOX INT_ARM_MAILBOX -+#define FIQ_ARM_DOORBELL_0 INT_ARM_DOORBELL_0 -+#define FIQ_ARM_DOORBELL_1 INT_ARM_DOORBELL_1 -+#define FIQ_VPU0_HALTED INT_VPU0_HALTED -+#define FIQ_VPU1_HALTED INT_VPU1_HALTED -+#define FIQ_ILLEGAL_TYPE0 INT_ILLEGAL_TYPE0 -+#define FIQ_ILLEGAL_TYPE1 INT_ILLEGAL_TYPE1 -+#define FIQ_PENDING1 INT_PENDING1 -+#define FIQ_PENDING2 INT_PENDING2 -+ -+#define HARD_IRQS (64 + 21) -+#define GPIO_IRQ_START (HARD_IRQS) -+#define GPIO_IRQS (32*5) -+#define SPARE_ALLOC_IRQS 64 -+#define BCM2708_ALLOC_IRQS (HARD_IRQS+FIQ_IRQS+GPIO_IRQS+SPARE_ALLOC_IRQS) -+#define FREE_IRQS 128 -+#define NR_IRQS (BCM2708_ALLOC_IRQS+FREE_IRQS) -+ -+#endif /* _BCM2708_IRQS_H_ */ ---- /dev/null -+++ b/arch/arm/mach-bcm2708/include/mach/memory.h -@@ -0,0 +1,57 @@ -+/* -+ * arch/arm/mach-bcm2708/include/mach/memory.h -+ * -+ * Copyright (C) 2010 Broadcom -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+#ifndef __ASM_ARCH_MEMORY_H -+#define __ASM_ARCH_MEMORY_H -+ -+/* Memory overview: -+ -+ [ARMcore] <--virtual addr--> -+ [ARMmmu] <--physical addr--> -+ [GERTmap] <--bus add--> -+ [VCperiph] -+ -+*/ -+ -+/* -+ * Physical DRAM offset. -+ */ -+#define BCM_PLAT_PHYS_OFFSET UL(0x00000000) -+#define VC_ARMMEM_OFFSET UL(0x00000000) /* offset in VC of ARM memory */ -+ -+#ifdef CONFIG_BCM2708_NOL2CACHE -+ #define _REAL_BUS_OFFSET UL(0xC0000000) /* don't use L1 or L2 caches */ -+#else -+ #define _REAL_BUS_OFFSET UL(0x40000000) /* use L2 cache */ -+#endif -+ -+/* We're using the memory at 64M in the VideoCore for Linux - this adjustment -+ * will provide the offset into this area as well as setting the bits that -+ * stop the L1 and L2 cache from being used -+ * -+ * WARNING: this only works because the ARM is given memory at a fixed location -+ * (ARMMEM_OFFSET) -+ */ -+#define BUS_OFFSET (VC_ARMMEM_OFFSET + _REAL_BUS_OFFSET) -+#define __virt_to_bus(x) ((x) + (BUS_OFFSET - PAGE_OFFSET)) -+#define __bus_to_virt(x) ((x) - (BUS_OFFSET - PAGE_OFFSET)) -+#define __pfn_to_bus(x) (__pfn_to_phys(x) + (BUS_OFFSET - BCM_PLAT_PHYS_OFFSET)) -+#define __bus_to_pfn(x) __phys_to_pfn((x) - (BUS_OFFSET - BCM_PLAT_PHYS_OFFSET)) -+ -+#endif ---- /dev/null -+++ b/arch/arm/mach-bcm2708/include/mach/platform.h -@@ -0,0 +1,228 @@ -+/* -+ * arch/arm/mach-bcm2708/include/mach/platform.h -+ * -+ * Copyright (C) 2010 Broadcom -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+ -+#ifndef _BCM2708_PLATFORM_H -+#define _BCM2708_PLATFORM_H -+ -+ -+/* macros to get at IO space when running virtually */ -+#define IO_ADDRESS(x) (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000) -+ -+#define __io_address(n) IOMEM(IO_ADDRESS(n)) -+ -+ -+/* -+ * SDRAM -+ */ -+#define BCM2708_SDRAM_BASE 0x00000000 -+ -+/* -+ * Logic expansion modules -+ * -+ */ -+ -+ -+/* ------------------------------------------------------------------------ -+ * BCM2708 ARMCTRL Registers -+ * ------------------------------------------------------------------------ -+ */ -+ -+#define HW_REGISTER_RW(addr) (addr) -+#define HW_REGISTER_RO(addr) (addr) -+ -+#include "arm_control.h" -+#undef ARM_BASE -+ -+/* -+ * Definitions and addresses for the ARM CONTROL logic -+ * This file is manually generated. -+ */ -+ -+#define BCM2708_PERI_BASE 0x20000000 -+#define IC0_BASE (BCM2708_PERI_BASE + 0x2000) -+#define ST_BASE (BCM2708_PERI_BASE + 0x3000) /* System Timer */ -+#define MPHI_BASE (BCM2708_PERI_BASE + 0x6000) /* Message -based Parallel Host Interface */ -+#define DMA_BASE (BCM2708_PERI_BASE + 0x7000) /* DMA controller */ -+#define ARM_BASE (BCM2708_PERI_BASE + 0xB000) /* BCM2708 ARM control block */ -+#define PM_BASE (BCM2708_PERI_BASE + 0x100000) /* Power Management, Reset controller and Watchdog registers */ -+#define PCM_CLOCK_BASE (BCM2708_PERI_BASE + 0x101098) /* PCM Clock */ -+#define RNG_BASE (BCM2708_PERI_BASE + 0x104000) /* Hardware RNG */ -+#define GPIO_BASE (BCM2708_PERI_BASE + 0x200000) /* GPIO */ -+#define UART0_BASE (BCM2708_PERI_BASE + 0x201000) /* Uart 0 */ -+#define MMCI0_BASE (BCM2708_PERI_BASE + 0x202000) /* MMC interface */ -+#define I2S_BASE (BCM2708_PERI_BASE + 0x203000) /* I2S */ -+#define SPI0_BASE (BCM2708_PERI_BASE + 0x204000) /* SPI0 */ -+#define BSC0_BASE (BCM2708_PERI_BASE + 0x205000) /* BSC0 I2C/TWI */ -+#define UART1_BASE (BCM2708_PERI_BASE + 0x215000) /* Uart 1 */ -+#define EMMC_BASE (BCM2708_PERI_BASE + 0x300000) /* eMMC interface */ -+#define SMI_BASE (BCM2708_PERI_BASE + 0x600000) /* SMI */ -+#define BSC1_BASE (BCM2708_PERI_BASE + 0x804000) /* BSC1 I2C/TWI */ -+#define USB_BASE (BCM2708_PERI_BASE + 0x980000) /* DTC_OTG USB controller */ -+#define MCORE_BASE (BCM2708_PERI_BASE + 0x0000) /* Fake frame buffer device (actually the multicore sync block*/ -+ -+#define ARMCTRL_BASE (ARM_BASE + 0x000) -+#define ARMCTRL_IC_BASE (ARM_BASE + 0x200) /* ARM interrupt controller */ -+#define ARMCTRL_TIMER0_1_BASE (ARM_BASE + 0x400) /* Timer 0 and 1 */ -+#define ARMCTRL_0_SBM_BASE (ARM_BASE + 0x800) /* User 0 (ARM)'s Semaphores Doorbells and Mailboxes */ -+ -+ -+/* -+ * Interrupt assignments -+ */ -+ -+#define ARM_IRQ1_BASE 0 -+#define INTERRUPT_TIMER0 (ARM_IRQ1_BASE + 0) -+#define INTERRUPT_TIMER1 (ARM_IRQ1_BASE + 1) -+#define INTERRUPT_TIMER2 (ARM_IRQ1_BASE + 2) -+#define INTERRUPT_TIMER3 (ARM_IRQ1_BASE + 3) -+#define INTERRUPT_CODEC0 (ARM_IRQ1_BASE + 4) -+#define INTERRUPT_CODEC1 (ARM_IRQ1_BASE + 5) -+#define INTERRUPT_CODEC2 (ARM_IRQ1_BASE + 6) -+#define INTERRUPT_VC_JPEG (ARM_IRQ1_BASE + 7) -+#define INTERRUPT_ISP (ARM_IRQ1_BASE + 8) -+#define INTERRUPT_VC_USB (ARM_IRQ1_BASE + 9) -+#define INTERRUPT_VC_3D (ARM_IRQ1_BASE + 10) -+#define INTERRUPT_TRANSPOSER (ARM_IRQ1_BASE + 11) -+#define INTERRUPT_MULTICORESYNC0 (ARM_IRQ1_BASE + 12) -+#define INTERRUPT_MULTICORESYNC1 (ARM_IRQ1_BASE + 13) -+#define INTERRUPT_MULTICORESYNC2 (ARM_IRQ1_BASE + 14) -+#define INTERRUPT_MULTICORESYNC3 (ARM_IRQ1_BASE + 15) -+#define INTERRUPT_DMA0 (ARM_IRQ1_BASE + 16) -+#define INTERRUPT_DMA1 (ARM_IRQ1_BASE + 17) -+#define INTERRUPT_VC_DMA2 (ARM_IRQ1_BASE + 18) -+#define INTERRUPT_VC_DMA3 (ARM_IRQ1_BASE + 19) -+#define INTERRUPT_DMA4 (ARM_IRQ1_BASE + 20) -+#define INTERRUPT_DMA5 (ARM_IRQ1_BASE + 21) -+#define INTERRUPT_DMA6 (ARM_IRQ1_BASE + 22) -+#define INTERRUPT_DMA7 (ARM_IRQ1_BASE + 23) -+#define INTERRUPT_DMA8 (ARM_IRQ1_BASE + 24) -+#define INTERRUPT_DMA9 (ARM_IRQ1_BASE + 25) -+#define INTERRUPT_DMA10 (ARM_IRQ1_BASE + 26) -+#define INTERRUPT_DMA11 (ARM_IRQ1_BASE + 27) -+#define INTERRUPT_DMA12 (ARM_IRQ1_BASE + 28) -+#define INTERRUPT_AUX (ARM_IRQ1_BASE + 29) -+#define INTERRUPT_ARM (ARM_IRQ1_BASE + 30) -+#define INTERRUPT_VPUDMA (ARM_IRQ1_BASE + 31) -+ -+#define ARM_IRQ2_BASE 32 -+#define INTERRUPT_HOSTPORT (ARM_IRQ2_BASE + 0) -+#define INTERRUPT_VIDEOSCALER (ARM_IRQ2_BASE + 1) -+#define INTERRUPT_CCP2TX (ARM_IRQ2_BASE + 2) -+#define INTERRUPT_SDC (ARM_IRQ2_BASE + 3) -+#define INTERRUPT_DSI0 (ARM_IRQ2_BASE + 4) -+#define INTERRUPT_AVE (ARM_IRQ2_BASE + 5) -+#define INTERRUPT_CAM0 (ARM_IRQ2_BASE + 6) -+#define INTERRUPT_CAM1 (ARM_IRQ2_BASE + 7) -+#define INTERRUPT_HDMI0 (ARM_IRQ2_BASE + 8) -+#define INTERRUPT_HDMI1 (ARM_IRQ2_BASE + 9) -+#define INTERRUPT_PIXELVALVE1 (ARM_IRQ2_BASE + 10) -+#define INTERRUPT_I2CSPISLV (ARM_IRQ2_BASE + 11) -+#define INTERRUPT_DSI1 (ARM_IRQ2_BASE + 12) -+#define INTERRUPT_PWA0 (ARM_IRQ2_BASE + 13) -+#define INTERRUPT_PWA1 (ARM_IRQ2_BASE + 14) -+#define INTERRUPT_CPR (ARM_IRQ2_BASE + 15) -+#define INTERRUPT_SMI (ARM_IRQ2_BASE + 16) -+#define INTERRUPT_GPIO0 (ARM_IRQ2_BASE + 17) -+#define INTERRUPT_GPIO1 (ARM_IRQ2_BASE + 18) -+#define INTERRUPT_GPIO2 (ARM_IRQ2_BASE + 19) -+#define INTERRUPT_GPIO3 (ARM_IRQ2_BASE + 20) -+#define INTERRUPT_VC_I2C (ARM_IRQ2_BASE + 21) -+#define INTERRUPT_VC_SPI (ARM_IRQ2_BASE + 22) -+#define INTERRUPT_VC_I2SPCM (ARM_IRQ2_BASE + 23) -+#define INTERRUPT_VC_SDIO (ARM_IRQ2_BASE + 24) -+#define INTERRUPT_VC_UART (ARM_IRQ2_BASE + 25) -+#define INTERRUPT_SLIMBUS (ARM_IRQ2_BASE + 26) -+#define INTERRUPT_VEC (ARM_IRQ2_BASE + 27) -+#define INTERRUPT_CPG (ARM_IRQ2_BASE + 28) -+#define INTERRUPT_RNG (ARM_IRQ2_BASE + 29) -+#define INTERRUPT_VC_ARASANSDIO (ARM_IRQ2_BASE + 30) -+#define INTERRUPT_AVSPMON (ARM_IRQ2_BASE + 31) -+ -+#define ARM_IRQ0_BASE 64 -+#define INTERRUPT_ARM_TIMER (ARM_IRQ0_BASE + 0) -+#define INTERRUPT_ARM_MAILBOX (ARM_IRQ0_BASE + 1) -+#define INTERRUPT_ARM_DOORBELL_0 (ARM_IRQ0_BASE + 2) -+#define INTERRUPT_ARM_DOORBELL_1 (ARM_IRQ0_BASE + 3) -+#define INTERRUPT_VPU0_HALTED (ARM_IRQ0_BASE + 4) -+#define INTERRUPT_VPU1_HALTED (ARM_IRQ0_BASE + 5) -+#define INTERRUPT_ILLEGAL_TYPE0 (ARM_IRQ0_BASE + 6) -+#define INTERRUPT_ILLEGAL_TYPE1 (ARM_IRQ0_BASE + 7) -+#define INTERRUPT_PENDING1 (ARM_IRQ0_BASE + 8) -+#define INTERRUPT_PENDING2 (ARM_IRQ0_BASE + 9) -+#define INTERRUPT_JPEG (ARM_IRQ0_BASE + 10) -+#define INTERRUPT_USB (ARM_IRQ0_BASE + 11) -+#define INTERRUPT_3D (ARM_IRQ0_BASE + 12) -+#define INTERRUPT_DMA2 (ARM_IRQ0_BASE + 13) -+#define INTERRUPT_DMA3 (ARM_IRQ0_BASE + 14) -+#define INTERRUPT_I2C (ARM_IRQ0_BASE + 15) -+#define INTERRUPT_SPI (ARM_IRQ0_BASE + 16) -+#define INTERRUPT_I2SPCM (ARM_IRQ0_BASE + 17) -+#define INTERRUPT_SDIO (ARM_IRQ0_BASE + 18) -+#define INTERRUPT_UART (ARM_IRQ0_BASE + 19) -+#define INTERRUPT_ARASANSDIO (ARM_IRQ0_BASE + 20) -+ -+#define MAXIRQNUM (32 + 32 + 20) -+#define MAXFIQNUM (32 + 32 + 20) -+ -+#define MAX_TIMER 2 -+#define MAX_PERIOD 699050 -+#define TICKS_PER_uSEC 1 -+ -+/* -+ * These are useconds NOT ticks. -+ * -+ */ -+#define mSEC_1 1000 -+#define mSEC_5 (mSEC_1 * 5) -+#define mSEC_10 (mSEC_1 * 10) -+#define mSEC_25 (mSEC_1 * 25) -+#define SEC_1 (mSEC_1 * 1000) -+ -+/* -+ * Watchdog -+ */ -+#define PM_RSTC (PM_BASE+0x1c) -+#define PM_RSTS (PM_BASE+0x20) -+#define PM_WDOG (PM_BASE+0x24) -+ -+#define PM_WDOG_RESET 0000000000 -+#define PM_PASSWORD 0x5a000000 -+#define PM_WDOG_TIME_SET 0x000fffff -+#define PM_RSTC_WRCFG_CLR 0xffffffcf -+#define PM_RSTC_WRCFG_SET 0x00000030 -+#define PM_RSTC_WRCFG_FULL_RESET 0x00000020 -+#define PM_RSTC_RESET 0x00000102 -+ -+#define PM_RSTS_HADPOR_SET 0x00001000 -+#define PM_RSTS_HADSRH_SET 0x00000400 -+#define PM_RSTS_HADSRF_SET 0x00000200 -+#define PM_RSTS_HADSRQ_SET 0x00000100 -+#define PM_RSTS_HADWRH_SET 0x00000040 -+#define PM_RSTS_HADWRF_SET 0x00000020 -+#define PM_RSTS_HADWRQ_SET 0x00000010 -+#define PM_RSTS_HADDRH_SET 0x00000004 -+#define PM_RSTS_HADDRF_SET 0x00000002 -+#define PM_RSTS_HADDRQ_SET 0x00000001 -+ -+#define UART0_CLOCK 3000000 -+ -+#endif -+ -+/* END */ ---- /dev/null -+++ b/arch/arm/mach-bcm2708/include/mach/system.h -@@ -0,0 +1,38 @@ -+/* -+ * arch/arm/mach-bcm2708/include/mach/system.h -+ * -+ * Copyright (C) 2010 Broadcom -+ * Copyright (C) 2003 ARM Limited -+ * Copyright (C) 2000 Deep Blue Solutions Ltd -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+#ifndef __ASM_ARCH_SYSTEM_H -+#define __ASM_ARCH_SYSTEM_H -+ -+#include <linux/io.h> -+#include <mach/hardware.h> -+#include <mach/platform.h> -+ -+static inline void arch_idle(void) -+{ -+ /* -+ * This should do all the clock switching -+ * and wait for interrupt tricks -+ */ -+ cpu_do_idle(); -+} -+ -+#endif ---- /dev/null -+++ b/arch/arm/mach-bcm2708/include/mach/timex.h -@@ -0,0 +1,23 @@ -+/* -+ * arch/arm/mach-bcm2708/include/mach/timex.h -+ * -+ * BCM2708 sysem clock frequency -+ * -+ * Copyright (C) 2010 Broadcom -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+ -+#define CLOCK_TICK_RATE (1000000) ---- /dev/null -+++ b/arch/arm/mach-bcm2708/include/mach/uncompress.h -@@ -0,0 +1,84 @@ -+/* -+ * arch/arm/mach-bcn2708/include/mach/uncompress.h -+ * -+ * Copyright (C) 2010 Broadcom -+ * Copyright (C) 2003 ARM Limited -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+ -+#include <linux/io.h> -+#include <linux/amba/serial.h> -+#include <mach/hardware.h> -+ -+#define UART_BAUD 115200 -+ -+#define BCM2708_UART_DR __io(UART0_BASE + UART01x_DR) -+#define BCM2708_UART_FR __io(UART0_BASE + UART01x_FR) -+#define BCM2708_UART_IBRD __io(UART0_BASE + UART011_IBRD) -+#define BCM2708_UART_FBRD __io(UART0_BASE + UART011_FBRD) -+#define BCM2708_UART_LCRH __io(UART0_BASE + UART011_LCRH) -+#define BCM2708_UART_CR __io(UART0_BASE + UART011_CR) -+ -+/* -+ * This does not append a newline -+ */ -+static inline void putc(int c) -+{ -+ while (__raw_readl(BCM2708_UART_FR) & UART01x_FR_TXFF) -+ barrier(); -+ -+ __raw_writel(c, BCM2708_UART_DR); -+} -+ -+static inline void flush(void) -+{ -+ int fr; -+ -+ do { -+ fr = __raw_readl(BCM2708_UART_FR); -+ barrier(); -+ } while ((fr & (UART011_FR_TXFE | UART01x_FR_BUSY)) != UART011_FR_TXFE); -+} -+ -+static inline void arch_decomp_setup(void) -+{ -+ int temp, div, rem, frac; -+ -+ temp = 16 * UART_BAUD; -+ div = UART0_CLOCK / temp; -+ rem = UART0_CLOCK % temp; -+ temp = (8 * rem) / UART_BAUD; -+ frac = (temp >> 1) + (temp & 1); -+ -+ /* Make sure the UART is disabled before we start */ -+ __raw_writel(0, BCM2708_UART_CR); -+ -+ /* Set the baud rate */ -+ __raw_writel(div, BCM2708_UART_IBRD); -+ __raw_writel(frac, BCM2708_UART_FBRD); -+ -+ /* Set the UART to 8n1, FIFO enabled */ -+ __raw_writel(UART01x_LCRH_WLEN_8 | UART01x_LCRH_FEN, BCM2708_UART_LCRH); -+ -+ /* Enable the UART */ -+ __raw_writel(UART01x_CR_UARTEN | UART011_CR_TXE | UART011_CR_RXE, -+ BCM2708_UART_CR); -+} -+ -+/* -+ * nothing to do -+ */ -+#define arch_decomp_wdog() ---- /dev/null -+++ b/arch/arm/mach-bcm2708/include/mach/vmalloc.h -@@ -0,0 +1,20 @@ -+/* -+ * arch/arm/mach-bcm2708/include/mach/vmalloc.h -+ * -+ * Copyright (C) 2010 Broadcom -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+#define VMALLOC_END (0xe8000000) ---- /dev/null -+++ b/arch/arm/mach-bcm2709/Kconfig -@@ -0,0 +1,42 @@ -+menu "Broadcom BCM2709 Implementations" -+ depends on ARCH_BCM2709 -+ -+config MACH_BCM2709 -+ bool "Broadcom BCM2709 Development Platform" -+ help -+ Include support for the Broadcom(R) BCM2709 platform. -+ -+config BCM2709_DT -+ bool "BCM2709 Device Tree support" -+ depends on MACH_BCM2709 -+ default n -+ select USE_OF -+ select ARCH_REQUIRE_GPIOLIB -+ select PINCTRL -+ select PINCTRL_BCM2835 -+ help -+ Enable Device Tree support for BCM2709 -+ -+config BCM2708_GPIO -+ bool "BCM2709 gpio support" -+ depends on MACH_BCM2709 -+ select ARCH_REQUIRE_GPIOLIB -+ default y -+ help -+ Include support for the Broadcom(R) BCM2709 gpio. -+ -+config BCM2708_NOL2CACHE -+ bool "Videocore L2 cache disable" -+ depends on MACH_BCM2709 -+ default y -+ help -+ Do not allow ARM to use GPU's L2 cache. Requires disable_l2cache in config.txt. -+ -+config BCM2708_SPIDEV -+ bool "Bind spidev to SPI0 master" -+ depends on MACH_BCM2709 -+ depends on SPI -+ default y -+ help -+ Binds spidev driver to the SPI0 master -+endmenu ---- /dev/null -+++ b/arch/arm/mach-bcm2709/Makefile -@@ -0,0 +1,6 @@ -+# -+# Makefile for the linux kernel. -+# -+ -+obj-$(CONFIG_MACH_BCM2709) += bcm2709.o armctrl.o -+obj-$(CONFIG_BCM2708_GPIO) += bcm2708_gpio.o ---- /dev/null -+++ b/arch/arm/mach-bcm2709/Makefile.boot -@@ -0,0 +1,3 @@ -+ zreladdr-y := 0x00008000 -+params_phys-y := 0x00000100 -+initrd_phys-y := 0x00800000 ---- /dev/null -+++ b/arch/arm/mach-bcm2709/armctrl.c -@@ -0,0 +1,361 @@ -+/* -+ * linux/arch/arm/mach-bcm2708/armctrl.c -+ * -+ * Copyright (C) 2010 Broadcom -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+#include <linux/init.h> -+#include <linux/list.h> -+#include <linux/io.h> -+#include <linux/version.h> -+#include <linux/syscore_ops.h> -+#include <linux/interrupt.h> -+#include <linux/irqdomain.h> -+#include <linux/of.h> -+ -+#include <asm/mach/irq.h> -+#include <mach/hardware.h> -+#include "armctrl.h" -+ -+/* For support of kernels >= 3.0 assume only one VIC for now*/ -+static unsigned int remap_irqs[(INTERRUPT_ARASANSDIO + 1) - INTERRUPT_JPEG] = { -+ INTERRUPT_VC_JPEG, -+ INTERRUPT_VC_USB, -+ INTERRUPT_VC_3D, -+ INTERRUPT_VC_DMA2, -+ INTERRUPT_VC_DMA3, -+ INTERRUPT_VC_I2C, -+ INTERRUPT_VC_SPI, -+ INTERRUPT_VC_I2SPCM, -+ INTERRUPT_VC_SDIO, -+ INTERRUPT_VC_UART, -+ INTERRUPT_VC_ARASANSDIO -+}; -+ -+static void armctrl_mask_irq(struct irq_data *d) -+{ -+ static const unsigned int disables[4] = { -+ ARM_IRQ_DIBL1, -+ ARM_IRQ_DIBL2, -+ ARM_IRQ_DIBL3, -+ 0 -+ }; -+ int i; -+ if (d->irq >= FIQ_START) { -+ writel(0, __io_address(ARM_IRQ_FAST)); -+ } else if (d->irq >= IRQ_ARM_LOCAL_CNTPSIRQ && d->irq < IRQ_ARM_LOCAL_CNTPSIRQ + 4) { -+#if 1 -+ unsigned int data = (unsigned int)irq_get_chip_data(d->irq) - IRQ_ARM_LOCAL_CNTPSIRQ; -+ for (i=0; i<4; i++) // i = raw_smp_processor_id(); // -+ { -+ unsigned int val = readl(__io_address(ARM_LOCAL_TIMER_INT_CONTROL0 + 4*i)); -+ writel(val &~ (1 << data), __io_address(ARM_LOCAL_TIMER_INT_CONTROL0 + 4*i)); -+ } -+#endif -+ } else if (d->irq >= IRQ_ARM_LOCAL_MAILBOX0 && d->irq < IRQ_ARM_LOCAL_MAILBOX0 + 4) { -+#if 0 -+ unsigned int data = (unsigned int)irq_get_chip_data(d->irq) - IRQ_ARM_LOCAL_MAILBOX0; -+ for (i=0; i<4; i++) { -+ unsigned int val = readl(__io_address(ARM_LOCAL_MAILBOX_INT_CONTROL0 + 4*i)); -+ writel(val &~ (1 << data), __io_address(ARM_LOCAL_MAILBOX_INT_CONTROL0 + 4*i)); -+ } -+#endif -+ } else if (d->irq >= ARM_IRQ1_BASE && d->irq < ARM_IRQ_LOCAL_BASE) { -+ unsigned int data = (unsigned int)irq_get_chip_data(d->irq); -+ writel(1 << (data & 0x1f), __io_address(disables[(data >> 5) & 0x3])); -+ } else if (d->irq == INTERRUPT_ARM_LOCAL_PMU_FAST) { -+ writel(0xf, __io_address(ARM_LOCAL_PM_ROUTING_CLR)); -+ } else { printk("%s: %d\n", __func__, d->irq); BUG(); } -+} -+ -+static void armctrl_unmask_irq(struct irq_data *d) -+{ -+ static const unsigned int enables[4] = { -+ ARM_IRQ_ENBL1, -+ ARM_IRQ_ENBL2, -+ ARM_IRQ_ENBL3, -+ 0 -+ }; -+ int i; -+ if (d->irq >= FIQ_START) { -+ unsigned int data = (unsigned int)irq_get_chip_data(d->irq) - FIQ_START; -+ writel(0x80 | data, __io_address(ARM_IRQ_FAST)); -+ } else if (d->irq >= IRQ_ARM_LOCAL_CNTPSIRQ && d->irq < IRQ_ARM_LOCAL_CNTPSIRQ + 4) { -+#if 1 -+ unsigned int data = (unsigned int)irq_get_chip_data(d->irq) - IRQ_ARM_LOCAL_CNTPSIRQ; -+ for (i=0; i<4; i++) // i = raw_smp_processor_id(); -+ { -+ unsigned int val = readl(__io_address(ARM_LOCAL_TIMER_INT_CONTROL0 + 4*i)); -+ writel(val | (1 << data), __io_address(ARM_LOCAL_TIMER_INT_CONTROL0 + 4*i)); -+ } -+#endif -+ } else if (d->irq >= IRQ_ARM_LOCAL_MAILBOX0 && d->irq < IRQ_ARM_LOCAL_MAILBOX0 + 4) { -+#if 0 -+ unsigned int data = (unsigned int)irq_get_chip_data(d->irq) - IRQ_ARM_LOCAL_MAILBOX0; -+ for (i=0; i<4; i++) { -+ unsigned int val = readl(__io_address(ARM_LOCAL_MAILBOX_INT_CONTROL0 + 4*i)); -+ writel(val | (1 << data), __io_address(ARM_LOCAL_MAILBOX_INT_CONTROL0 + 4*i)); -+ } -+#endif -+ } else if (d->irq >= ARM_IRQ1_BASE && d->irq < ARM_IRQ_LOCAL_BASE) { -+ unsigned int data = (unsigned int)irq_get_chip_data(d->irq); -+ writel(1 << (data & 0x1f), __io_address(enables[(data >> 5) & 0x3])); -+ } else if (d->irq == INTERRUPT_ARM_LOCAL_PMU_FAST) { -+ writel(0xf, __io_address(ARM_LOCAL_PM_ROUTING_SET)); -+ } else { printk("%s: %d\n", __func__, d->irq); BUG(); } -+} -+ -+#ifdef CONFIG_OF -+ -+#define NR_IRQS_BANK0 21 -+#define NR_BANKS 4 -+#define IRQS_PER_BANK 32 -+ -+/* from drivers/irqchip/irq-bcm2835.c */ -+static int armctrl_xlate(struct irq_domain *d, struct device_node *ctrlr, -+ const u32 *intspec, unsigned int intsize, -+ unsigned long *out_hwirq, unsigned int *out_type) -+{ -+ if (WARN_ON(intsize != 2)) -+ return -EINVAL; -+ -+ if (WARN_ON(intspec[0] >= NR_BANKS)) -+ return -EINVAL; -+ -+ if (WARN_ON(intspec[1] >= IRQS_PER_BANK)) -+ return -EINVAL; -+ -+ if (WARN_ON(intspec[0] == 0 && intspec[1] >= NR_IRQS_BANK0)) -+ return -EINVAL; -+ -+ if (WARN_ON(intspec[0] == 3 && intspec[1] > 3 && intspec[1] != 5 && intspec[1] != 9)) -+ return -EINVAL; -+ -+ if (intspec[0] == 0) -+ *out_hwirq = ARM_IRQ0_BASE + intspec[1]; -+ else if (intspec[0] == 1) -+ *out_hwirq = ARM_IRQ1_BASE + intspec[1]; -+ else if (intspec[0] == 2) -+ *out_hwirq = ARM_IRQ2_BASE + intspec[1]; -+ else -+ *out_hwirq = ARM_IRQ_LOCAL_BASE + intspec[1]; -+ -+ /* reverse remap_irqs[] */ -+ switch (*out_hwirq) { -+ case INTERRUPT_VC_JPEG: -+ *out_hwirq = INTERRUPT_JPEG; -+ break; -+ case INTERRUPT_VC_USB: -+ *out_hwirq = INTERRUPT_USB; -+ break; -+ case INTERRUPT_VC_3D: -+ *out_hwirq = INTERRUPT_3D; -+ break; -+ case INTERRUPT_VC_DMA2: -+ *out_hwirq = INTERRUPT_DMA2; -+ break; -+ case INTERRUPT_VC_DMA3: -+ *out_hwirq = INTERRUPT_DMA3; -+ break; -+ case INTERRUPT_VC_I2C: -+ *out_hwirq = INTERRUPT_I2C; -+ break; -+ case INTERRUPT_VC_SPI: -+ *out_hwirq = INTERRUPT_SPI; -+ break; -+ case INTERRUPT_VC_I2SPCM: -+ *out_hwirq = INTERRUPT_I2SPCM; -+ break; -+ case INTERRUPT_VC_SDIO: -+ *out_hwirq = INTERRUPT_SDIO; -+ break; -+ case INTERRUPT_VC_UART: -+ *out_hwirq = INTERRUPT_UART; -+ break; -+ case INTERRUPT_VC_ARASANSDIO: -+ *out_hwirq = INTERRUPT_ARASANSDIO; -+ break; -+ } -+ -+ *out_type = IRQ_TYPE_NONE; -+ return 0; -+} -+ -+static struct irq_domain_ops armctrl_ops = { -+ .xlate = armctrl_xlate -+}; -+ -+void __init armctrl_dt_init(void) -+{ -+ struct device_node *np; -+ struct irq_domain *domain; -+ -+ np = of_find_compatible_node(NULL, NULL, "brcm,bcm2708-armctrl-ic"); -+ if (!np) -+ return; -+ -+ domain = irq_domain_add_legacy(np, BCM2708_ALLOC_IRQS, -+ IRQ_ARMCTRL_START, 0, -+ &armctrl_ops, NULL); -+ WARN_ON(!domain); -+} -+#else -+void __init armctrl_dt_init(void) { } -+#endif /* CONFIG_OF */ -+ -+#if defined(CONFIG_PM) -+ -+/* for kernels 3.xx use the new syscore_ops apis but for older kernels use the sys dev class */ -+ -+/* Static defines -+ * struct armctrl_device - VIC PM device (< 3.xx) -+ * @sysdev: The system device which is registered. (< 3.xx) -+ * @irq: The IRQ number for the base of the VIC. -+ * @base: The register base for the VIC. -+ * @resume_sources: A bitmask of interrupts for resume. -+ * @resume_irqs: The IRQs enabled for resume. -+ * @int_select: Save for VIC_INT_SELECT. -+ * @int_enable: Save for VIC_INT_ENABLE. -+ * @soft_int: Save for VIC_INT_SOFT. -+ * @protect: Save for VIC_PROTECT. -+ */ -+struct armctrl_info { -+ void __iomem *base; -+ int irq; -+ u32 resume_sources; -+ u32 resume_irqs; -+ u32 int_select; -+ u32 int_enable; -+ u32 soft_int; -+ u32 protect; -+} armctrl; -+ -+static int armctrl_suspend(void) -+{ -+ return 0; -+} -+ -+static void armctrl_resume(void) -+{ -+ return; -+} -+ -+/** -+ * armctrl_pm_register - Register a VIC for later power management control -+ * @base: The base address of the VIC. -+ * @irq: The base IRQ for the VIC. -+ * @resume_sources: bitmask of interrupts allowed for resume sources. -+ * -+ * For older kernels (< 3.xx) do - -+ * Register the VIC with the system device tree so that it can be notified -+ * of suspend and resume requests and ensure that the correct actions are -+ * taken to re-instate the settings on resume. -+ */ -+static void __init armctrl_pm_register(void __iomem * base, unsigned int irq, -+ u32 resume_sources) -+{ -+ armctrl.base = base; -+ armctrl.resume_sources = resume_sources; -+ armctrl.irq = irq; -+} -+ -+static int armctrl_set_wake(struct irq_data *d, unsigned int on) -+{ -+ unsigned int off = d->irq & 31; -+ u32 bit = 1 << off; -+ -+ if (!(bit & armctrl.resume_sources)) -+ return -EINVAL; -+ -+ if (on) -+ armctrl.resume_irqs |= bit; -+ else -+ armctrl.resume_irqs &= ~bit; -+ -+ return 0; -+} -+ -+#else -+static inline void armctrl_pm_register(void __iomem * base, unsigned int irq, -+ u32 arg1) -+{ -+} -+ -+#define armctrl_suspend NULL -+#define armctrl_resume NULL -+#define armctrl_set_wake NULL -+#endif /* CONFIG_PM */ -+ -+static struct syscore_ops armctrl_syscore_ops = { -+ .suspend = armctrl_suspend, -+ .resume = armctrl_resume, -+}; -+ -+/** -+ * armctrl_syscore_init - initicall to register VIC pm functions -+ * -+ * This is called via late_initcall() to register -+ * the resources for the VICs due to the early -+ * nature of the VIC's registration. -+*/ -+static int __init armctrl_syscore_init(void) -+{ -+ register_syscore_ops(&armctrl_syscore_ops); -+ return 0; -+} -+ -+late_initcall(armctrl_syscore_init); -+ -+static struct irq_chip armctrl_chip = { -+ .name = "ARMCTRL", -+ .irq_ack = NULL, -+ .irq_mask = armctrl_mask_irq, -+ .irq_unmask = armctrl_unmask_irq, -+ .irq_set_wake = armctrl_set_wake, -+}; -+ -+/** -+ * armctrl_init - initialise a vectored interrupt controller -+ * @base: iomem base address -+ * @irq_start: starting interrupt number, must be muliple of 32 -+ * @armctrl_sources: bitmask of interrupt sources to allow -+ * @resume_sources: bitmask of interrupt sources to allow for resume -+ */ -+int __init armctrl_init(void __iomem * base, unsigned int irq_start, -+ u32 armctrl_sources, u32 resume_sources) -+{ -+ unsigned int irq; -+ -+ for (irq = 0; irq < BCM2708_ALLOC_IRQS; irq++) { -+ unsigned int data = irq; -+ if (irq >= INTERRUPT_JPEG && irq <= INTERRUPT_ARASANSDIO) -+ data = remap_irqs[irq - INTERRUPT_JPEG]; -+ if (irq >= IRQ_ARM_LOCAL_CNTPSIRQ && irq <= IRQ_ARM_LOCAL_TIMER) { -+ irq_set_percpu_devid(irq); -+ irq_set_chip_and_handler(irq, &armctrl_chip, handle_percpu_devid_irq); -+ set_irq_flags(irq, IRQF_VALID | IRQF_NOAUTOEN); -+ } else { -+ irq_set_chip_and_handler(irq, &armctrl_chip, handle_level_irq); -+ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); -+ } -+ irq_set_chip_data(irq, (void *)data); -+ } -+ -+ armctrl_pm_register(base, irq_start, resume_sources); -+ init_FIQ(FIQ_START); -+ armctrl_dt_init(); -+ return 0; -+} ---- /dev/null -+++ b/arch/arm/mach-bcm2709/armctrl.h -@@ -0,0 +1,27 @@ -+/* -+ * linux/arch/arm/mach-bcm2708/armctrl.h -+ * -+ * Copyright (C) 2010 Broadcom -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+ -+#ifndef __BCM2708_ARMCTRL_H -+#define __BCM2708_ARMCTRL_H -+ -+extern int __init armctrl_init(void __iomem * base, unsigned int irq_start, -+ u32 armctrl_sources, u32 resume_sources); -+ -+#endif ---- /dev/null -+++ b/arch/arm/mach-bcm2709/bcm2708_gpio.c -@@ -0,0 +1,426 @@ -+/* -+ * linux/arch/arm/mach-bcm2708/bcm2708_gpio.c -+ * -+ * Copyright (C) 2010 Broadcom -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ */ -+ -+#include <linux/spinlock.h> -+#include <linux/module.h> -+#include <linux/delay.h> -+#include <linux/list.h> -+#include <linux/io.h> -+#include <linux/irq.h> -+#include <linux/interrupt.h> -+#include <linux/slab.h> -+#include <mach/gpio.h> -+#include <linux/gpio.h> -+#include <linux/platform_device.h> -+#include <mach/platform.h> -+#include <linux/pinctrl/consumer.h> -+ -+#include <linux/platform_data/bcm2708.h> -+ -+#define BCM_GPIO_DRIVER_NAME "bcm2708_gpio" -+#define DRIVER_NAME BCM_GPIO_DRIVER_NAME -+#define BCM_GPIO_USE_IRQ 1 -+ -+#define GPIOFSEL(x) (0x00+(x)*4) -+#define GPIOSET(x) (0x1c+(x)*4) -+#define GPIOCLR(x) (0x28+(x)*4) -+#define GPIOLEV(x) (0x34+(x)*4) -+#define GPIOEDS(x) (0x40+(x)*4) -+#define GPIOREN(x) (0x4c+(x)*4) -+#define GPIOFEN(x) (0x58+(x)*4) -+#define GPIOHEN(x) (0x64+(x)*4) -+#define GPIOLEN(x) (0x70+(x)*4) -+#define GPIOAREN(x) (0x7c+(x)*4) -+#define GPIOAFEN(x) (0x88+(x)*4) -+#define GPIOUD(x) (0x94+(x)*4) -+#define GPIOUDCLK(x) (0x98+(x)*4) -+ -+#define GPIO_BANKS 2 -+ -+enum { GPIO_FSEL_INPUT, GPIO_FSEL_OUTPUT, -+ GPIO_FSEL_ALT5, GPIO_FSEL_ALT_4, -+ GPIO_FSEL_ALT0, GPIO_FSEL_ALT1, -+ GPIO_FSEL_ALT2, GPIO_FSEL_ALT3, -+}; -+ -+ /* Each of the two spinlocks protects a different set of hardware -+ * regiters and data structurs. This decouples the code of the IRQ from -+ * the GPIO code. This also makes the case of a GPIO routine call from -+ * the IRQ code simpler. -+ */ -+static DEFINE_SPINLOCK(lock); /* GPIO registers */ -+ -+struct bcm2708_gpio { -+ struct list_head list; -+ void __iomem *base; -+ struct gpio_chip gc; -+ unsigned long rising[(BCM2708_NR_GPIOS + 31) / 32]; -+ unsigned long falling[(BCM2708_NR_GPIOS + 31) / 32]; -+ unsigned long high[(BCM2708_NR_GPIOS + 31) / 32]; -+ unsigned long low[(BCM2708_NR_GPIOS + 31) / 32]; -+}; -+ -+static int bcm2708_set_function(struct gpio_chip *gc, unsigned offset, -+ int function) -+{ -+ struct bcm2708_gpio *gpio = container_of(gc, struct bcm2708_gpio, gc); -+ unsigned long flags; -+ unsigned gpiodir; -+ unsigned gpio_bank = offset / 10; -+ unsigned gpio_field_offset = (offset - 10 * gpio_bank) * 3; -+ -+//printk(KERN_ERR DRIVER_NAME ": bcm2708_gpio_set_function %p (%d,%d)\n", gc, offset, function); -+ if (offset >= BCM2708_NR_GPIOS) -+ return -EINVAL; -+ -+ spin_lock_irqsave(&lock, flags); -+ -+ gpiodir = readl(gpio->base + GPIOFSEL(gpio_bank)); -+ gpiodir &= ~(7 << gpio_field_offset); -+ gpiodir |= function << gpio_field_offset; -+ writel(gpiodir, gpio->base + GPIOFSEL(gpio_bank)); -+ spin_unlock_irqrestore(&lock, flags); -+ gpiodir = readl(gpio->base + GPIOFSEL(gpio_bank)); -+ -+ return 0; -+} -+ -+static int bcm2708_gpio_dir_in(struct gpio_chip *gc, unsigned offset) -+{ -+ return bcm2708_set_function(gc, offset, GPIO_FSEL_INPUT); -+} -+ -+static void bcm2708_gpio_set(struct gpio_chip *gc, unsigned offset, int value); -+static int bcm2708_gpio_dir_out(struct gpio_chip *gc, unsigned offset, -+ int value) -+{ -+ int ret; -+ ret = bcm2708_set_function(gc, offset, GPIO_FSEL_OUTPUT); -+ if (ret >= 0) -+ bcm2708_gpio_set(gc, offset, value); -+ return ret; -+} -+ -+static int bcm2708_gpio_get(struct gpio_chip *gc, unsigned offset) -+{ -+ struct bcm2708_gpio *gpio = container_of(gc, struct bcm2708_gpio, gc); -+ unsigned gpio_bank = offset / 32; -+ unsigned gpio_field_offset = (offset - 32 * gpio_bank); -+ unsigned lev; -+ -+ if (offset >= BCM2708_NR_GPIOS) -+ return 0; -+ lev = readl(gpio->base + GPIOLEV(gpio_bank)); -+//printk(KERN_ERR DRIVER_NAME ": bcm2708_gpio_get %p (%d)=%d\n", gc, offset, 0x1 & (lev>>gpio_field_offset)); -+ return 0x1 & (lev >> gpio_field_offset); -+} -+ -+static void bcm2708_gpio_set(struct gpio_chip *gc, unsigned offset, int value) -+{ -+ struct bcm2708_gpio *gpio = container_of(gc, struct bcm2708_gpio, gc); -+ unsigned gpio_bank = offset / 32; -+ unsigned gpio_field_offset = (offset - 32 * gpio_bank); -+//printk(KERN_ERR DRIVER_NAME ": bcm2708_gpio_set %p (%d=%d)\n", gc, offset, value); -+ if (offset >= BCM2708_NR_GPIOS) -+ return; -+ if (value) -+ writel(1 << gpio_field_offset, gpio->base + GPIOSET(gpio_bank)); -+ else -+ writel(1 << gpio_field_offset, gpio->base + GPIOCLR(gpio_bank)); -+} -+ -+/********************** -+ * extension to configure pullups -+ */ -+int bcm2708_gpio_setpull(struct gpio_chip *gc, unsigned offset, -+ bcm2708_gpio_pull_t value) -+{ -+ struct bcm2708_gpio *gpio = container_of(gc, struct bcm2708_gpio, gc); -+ unsigned gpio_bank = offset / 32; -+ unsigned gpio_field_offset = (offset - 32 * gpio_bank); -+ -+ if (offset >= BCM2708_NR_GPIOS) -+ return -EINVAL; -+ -+ switch (value) { -+ case BCM2708_PULL_UP: -+ writel(2, gpio->base + GPIOUD(0)); -+ break; -+ case BCM2708_PULL_DOWN: -+ writel(1, gpio->base + GPIOUD(0)); -+ break; -+ case BCM2708_PULL_OFF: -+ writel(0, gpio->base + GPIOUD(0)); -+ break; -+ } -+ -+ udelay(5); -+ writel(1 << gpio_field_offset, gpio->base + GPIOUDCLK(gpio_bank)); -+ udelay(5); -+ writel(0, gpio->base + GPIOUD(0)); -+ writel(0 << gpio_field_offset, gpio->base + GPIOUDCLK(gpio_bank)); -+ -+ return 0; -+} -+EXPORT_SYMBOL(bcm2708_gpio_setpull); -+ -+/************************************************************************************************************************* -+ * bcm2708 GPIO IRQ -+ */ -+ -+#if BCM_GPIO_USE_IRQ -+ -+static int bcm2708_gpio_to_irq(struct gpio_chip *chip, unsigned gpio) -+{ -+ return gpio_to_irq(gpio); -+} -+ -+static int bcm2708_gpio_irq_set_type(struct irq_data *d, unsigned type) -+{ -+ unsigned irq = d->irq; -+ struct bcm2708_gpio *gpio = irq_get_chip_data(irq); -+ unsigned gn = irq_to_gpio(irq); -+ unsigned gb = gn / 32; -+ unsigned go = gn % 32; -+ -+ gpio->rising[gb] &= ~(1 << go); -+ gpio->falling[gb] &= ~(1 << go); -+ gpio->high[gb] &= ~(1 << go); -+ gpio->low[gb] &= ~(1 << go); -+ -+ if (type & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING | IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH)) -+ return -EINVAL; -+ -+ if (type & IRQ_TYPE_EDGE_RISING) -+ gpio->rising[gb] |= (1 << go); -+ if (type & IRQ_TYPE_EDGE_FALLING) -+ gpio->falling[gb] |= (1 << go); -+ if (type & IRQ_TYPE_LEVEL_HIGH) -+ gpio->high[gb] |= (1 << go); -+ if (type & IRQ_TYPE_LEVEL_LOW) -+ gpio->low[gb] |= (1 << go); -+ return 0; -+} -+ -+static void bcm2708_gpio_irq_mask(struct irq_data *d) -+{ -+ unsigned irq = d->irq; -+ struct bcm2708_gpio *gpio = irq_get_chip_data(irq); -+ unsigned gn = irq_to_gpio(irq); -+ unsigned gb = gn / 32; -+ unsigned long rising = readl(gpio->base + GPIOREN(gb)); -+ unsigned long falling = readl(gpio->base + GPIOFEN(gb)); -+ unsigned long high = readl(gpio->base + GPIOHEN(gb)); -+ unsigned long low = readl(gpio->base + GPIOLEN(gb)); -+ -+ gn = gn % 32; -+ -+ writel(rising & ~(1 << gn), gpio->base + GPIOREN(gb)); -+ writel(falling & ~(1 << gn), gpio->base + GPIOFEN(gb)); -+ writel(high & ~(1 << gn), gpio->base + GPIOHEN(gb)); -+ writel(low & ~(1 << gn), gpio->base + GPIOLEN(gb)); -+} -+ -+static void bcm2708_gpio_irq_unmask(struct irq_data *d) -+{ -+ unsigned irq = d->irq; -+ struct bcm2708_gpio *gpio = irq_get_chip_data(irq); -+ unsigned gn = irq_to_gpio(irq); -+ unsigned gb = gn / 32; -+ unsigned go = gn % 32; -+ unsigned long rising = readl(gpio->base + GPIOREN(gb)); -+ unsigned long falling = readl(gpio->base + GPIOFEN(gb)); -+ unsigned long high = readl(gpio->base + GPIOHEN(gb)); -+ unsigned long low = readl(gpio->base + GPIOLEN(gb)); -+ -+ if (gpio->rising[gb] & (1 << go)) { -+ writel(rising | (1 << go), gpio->base + GPIOREN(gb)); -+ } else { -+ writel(rising & ~(1 << go), gpio->base + GPIOREN(gb)); -+ } -+ -+ if (gpio->falling[gb] & (1 << go)) { -+ writel(falling | (1 << go), gpio->base + GPIOFEN(gb)); -+ } else { -+ writel(falling & ~(1 << go), gpio->base + GPIOFEN(gb)); -+ } -+ -+ if (gpio->high[gb] & (1 << go)) { -+ writel(high | (1 << go), gpio->base + GPIOHEN(gb)); -+ } else { -+ writel(high & ~(1 << go), gpio->base + GPIOHEN(gb)); -+ } -+ -+ if (gpio->low[gb] & (1 << go)) { -+ writel(low | (1 << go), gpio->base + GPIOLEN(gb)); -+ } else { -+ writel(low & ~(1 << go), gpio->base + GPIOLEN(gb)); -+ } -+} -+ -+static struct irq_chip bcm2708_irqchip = { -+ .name = "GPIO", -+ .irq_enable = bcm2708_gpio_irq_unmask, -+ .irq_disable = bcm2708_gpio_irq_mask, -+ .irq_unmask = bcm2708_gpio_irq_unmask, -+ .irq_mask = bcm2708_gpio_irq_mask, -+ .irq_set_type = bcm2708_gpio_irq_set_type, -+}; -+ -+static irqreturn_t bcm2708_gpio_interrupt(int irq, void *dev_id) -+{ -+ unsigned long edsr; -+ unsigned bank; -+ int i; -+ unsigned gpio; -+ unsigned level_bits; -+ struct bcm2708_gpio *gpio_data = dev_id; -+ -+ for (bank = 0; bank < GPIO_BANKS; bank++) { -+ edsr = readl(__io_address(GPIO_BASE) + GPIOEDS(bank)); -+ level_bits = gpio_data->high[bank] | gpio_data->low[bank]; -+ -+ for_each_set_bit(i, &edsr, 32) { -+ gpio = i + bank * 32; -+ /* ack edge triggered IRQs immediately */ -+ if (!(level_bits & (1<<i))) -+ writel(1<<i, -+ __io_address(GPIO_BASE) + GPIOEDS(bank)); -+ generic_handle_irq(gpio_to_irq(gpio)); -+ /* ack level triggered IRQ after handling them */ -+ if (level_bits & (1<<i)) -+ writel(1<<i, -+ __io_address(GPIO_BASE) + GPIOEDS(bank)); -+ } -+ } -+ return IRQ_HANDLED; -+} -+ -+static struct irqaction bcm2708_gpio_irq = { -+ .name = "BCM2708 GPIO catchall handler", -+ .flags = IRQF_TIMER | IRQF_IRQPOLL, -+ .handler = bcm2708_gpio_interrupt, -+}; -+ -+static void bcm2708_gpio_irq_init(struct bcm2708_gpio *ucb) -+{ -+ unsigned irq; -+ -+ ucb->gc.to_irq = bcm2708_gpio_to_irq; -+ -+ for (irq = GPIO_IRQ_START; irq < (GPIO_IRQ_START + GPIO_IRQS); irq++) { -+ irq_set_chip_data(irq, ucb); -+ irq_set_chip_and_handler(irq, &bcm2708_irqchip, -+ handle_simple_irq); -+ set_irq_flags(irq, IRQF_VALID); -+ } -+ -+ bcm2708_gpio_irq.dev_id = ucb; -+ setup_irq(IRQ_GPIO3, &bcm2708_gpio_irq); -+} -+ -+#else -+ -+static void bcm2708_gpio_irq_init(struct bcm2708_gpio *ucb) -+{ -+} -+ -+#endif /* #if BCM_GPIO_USE_IRQ ***************************************************************************************************************** */ -+ -+static int bcm2708_gpio_probe(struct platform_device *dev) -+{ -+ struct bcm2708_gpio *ucb; -+ struct resource *res; -+ int bank; -+ int err = 0; -+ -+ printk(KERN_INFO DRIVER_NAME ": bcm2708_gpio_probe %p\n", dev); -+ -+ ucb = kzalloc(sizeof(*ucb), GFP_KERNEL); -+ if (NULL == ucb) { -+ printk(KERN_ERR DRIVER_NAME ": failed to allocate " -+ "mailbox memory\n"); -+ err = -ENOMEM; -+ goto err; -+ } -+ -+ res = platform_get_resource(dev, IORESOURCE_MEM, 0); -+ -+ platform_set_drvdata(dev, ucb); -+ ucb->base = __io_address(GPIO_BASE); -+ -+ ucb->gc.label = "bcm2708_gpio"; -+ ucb->gc.base = 0; -+ ucb->gc.ngpio = BCM2708_NR_GPIOS; -+ ucb->gc.owner = THIS_MODULE; -+ -+ ucb->gc.direction_input = bcm2708_gpio_dir_in; -+ ucb->gc.direction_output = bcm2708_gpio_dir_out; -+ ucb->gc.get = bcm2708_gpio_get; -+ ucb->gc.set = bcm2708_gpio_set; -+ ucb->gc.can_sleep = 0; -+ -+ for (bank = 0; bank < GPIO_BANKS; bank++) { -+ writel(0, ucb->base + GPIOREN(bank)); -+ writel(0, ucb->base + GPIOFEN(bank)); -+ writel(0, ucb->base + GPIOHEN(bank)); -+ writel(0, ucb->base + GPIOLEN(bank)); -+ writel(0, ucb->base + GPIOAREN(bank)); -+ writel(0, ucb->base + GPIOAFEN(bank)); -+ writel(~0, ucb->base + GPIOEDS(bank)); -+ } -+ -+ bcm2708_gpio_irq_init(ucb); -+ -+ err = gpiochip_add(&ucb->gc); -+ -+err: -+ return err; -+ -+} -+ -+static int bcm2708_gpio_remove(struct platform_device *dev) -+{ -+ int err = 0; -+ struct bcm2708_gpio *ucb = platform_get_drvdata(dev); -+ -+ printk(KERN_ERR DRIVER_NAME ": bcm2708_gpio_remove %p\n", dev); -+ -+ gpiochip_remove(&ucb->gc); -+ -+ platform_set_drvdata(dev, NULL); -+ kfree(ucb); -+ -+ return err; -+} -+ -+static struct platform_driver bcm2708_gpio_driver = { -+ .probe = bcm2708_gpio_probe, -+ .remove = bcm2708_gpio_remove, -+ .driver = { -+ .name = "bcm2708_gpio"}, -+}; -+ -+static int __init bcm2708_gpio_init(void) -+{ -+ return platform_driver_register(&bcm2708_gpio_driver); -+} -+ -+static void __exit bcm2708_gpio_exit(void) -+{ -+ platform_driver_unregister(&bcm2708_gpio_driver); -+} -+ -+module_init(bcm2708_gpio_init); -+module_exit(bcm2708_gpio_exit); -+ -+MODULE_DESCRIPTION("Broadcom BCM2708 GPIO driver"); -+MODULE_LICENSE("GPL"); ---- /dev/null -+++ b/arch/arm/mach-bcm2709/bcm2709.c -@@ -0,0 +1,801 @@ -+/* -+ * linux/arch/arm/mach-bcm2709/bcm2709.c -+ * -+ * Copyright (C) 2010 Broadcom -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+ -+#include <linux/init.h> -+#include <linux/device.h> -+#include <linux/dma-mapping.h> -+#include <linux/serial_8250.h> -+#include <linux/platform_device.h> -+#include <linux/syscore_ops.h> -+#include <linux/interrupt.h> -+#include <linux/amba/bus.h> -+#include <linux/amba/clcd.h> -+#include <linux/clk-provider.h> -+#include <linux/clkdev.h> -+#include <linux/clockchips.h> -+#include <linux/cnt32_to_63.h> -+#include <linux/io.h> -+#include <linux/module.h> -+#include <linux/of_platform.h> -+#include <linux/gpio/machine.h> -+ -+#include <linux/version.h> -+#include <linux/clkdev.h> -+#include <asm/system_info.h> -+#include <mach/hardware.h> -+#include <asm/irq.h> -+#include <linux/leds.h> -+#include <asm/mach-types.h> -+#include <asm/cputype.h> -+#include <linux/sched_clock.h> -+ -+#include <asm/mach/arch.h> -+#include <asm/mach/flash.h> -+#include <asm/mach/irq.h> -+#include <asm/mach/time.h> -+#include <asm/mach/map.h> -+ -+#include <mach/timex.h> -+#include <mach/system.h> -+ -+#include <linux/delay.h> -+ -+#include "bcm2709.h" -+#include "armctrl.h" -+ -+#ifdef CONFIG_BCM_VC_CMA -+#include <linux/broadcom/vc_cma.h> -+#endif -+ -+//#define SYSTEM_TIMER -+ -+/* Effectively we have an IOMMU (ARM<->VideoCore map) that is set up to -+ * give us IO access only to 64Mbytes of physical memory (26 bits). We could -+ * represent this window by setting our dmamasks to 26 bits but, in fact -+ * we're not going to use addresses outside this range (they're not in real -+ * memory) so we don't bother. -+ * -+ * In the future we might include code to use this IOMMU to remap other -+ * physical addresses onto VideoCore memory then the use of 32-bits would be -+ * more legitimate. -+ */ -+#define DMA_MASK_BITS_COMMON 32 -+ -+/* command line parameters */ -+static unsigned boardrev, serial; -+static unsigned uart_clock = UART0_CLOCK; -+static unsigned disk_led_gpio = 16; -+static unsigned disk_led_active_low = 1; -+static unsigned reboot_part = 0; -+ -+static unsigned use_dt = 0; -+ -+static void __init bcm2709_init_led(void); -+ -+void __init bcm2709_init_irq(void) -+{ -+ armctrl_init(__io_address(ARMCTRL_IC_BASE), 0, 0, 0); -+} -+ -+static struct map_desc bcm2709_io_desc[] __initdata = { -+ { -+ .virtual = IO_ADDRESS(ARMCTRL_BASE), -+ .pfn = __phys_to_pfn(ARMCTRL_BASE), -+ .length = SZ_4K, -+ .type = MT_DEVICE}, -+ { -+ .virtual = IO_ADDRESS(UART0_BASE), -+ .pfn = __phys_to_pfn(UART0_BASE), -+ .length = SZ_4K, -+ .type = MT_DEVICE}, -+ { -+ .virtual = IO_ADDRESS(UART1_BASE), -+ .pfn = __phys_to_pfn(UART1_BASE), -+ .length = SZ_4K, -+ .type = MT_DEVICE}, -+ { -+ .virtual = IO_ADDRESS(DMA_BASE), -+ .pfn = __phys_to_pfn(DMA_BASE), -+ .length = SZ_4K, -+ .type = MT_DEVICE}, -+ { -+ .virtual = IO_ADDRESS(MCORE_BASE), -+ .pfn = __phys_to_pfn(MCORE_BASE), -+ .length = SZ_4K, -+ .type = MT_DEVICE}, -+ { -+ .virtual = IO_ADDRESS(ST_BASE), -+ .pfn = __phys_to_pfn(ST_BASE), -+ .length = SZ_4K, -+ .type = MT_DEVICE}, -+ { -+ .virtual = IO_ADDRESS(USB_BASE), -+ .pfn = __phys_to_pfn(USB_BASE), -+ .length = SZ_128K, -+ .type = MT_DEVICE}, -+ { -+ .virtual = IO_ADDRESS(PM_BASE), -+ .pfn = __phys_to_pfn(PM_BASE), -+ .length = SZ_4K, -+ .type = MT_DEVICE}, -+ { -+ .virtual = IO_ADDRESS(GPIO_BASE), -+ .pfn = __phys_to_pfn(GPIO_BASE), -+ .length = SZ_4K, -+ .type = MT_DEVICE}, -+ { -+ .virtual = IO_ADDRESS(ARM_LOCAL_BASE), -+ .pfn = __phys_to_pfn(ARM_LOCAL_BASE), -+ .length = SZ_4K, -+ .type = MT_DEVICE}, -+}; -+ -+void __init bcm2709_map_io(void) -+{ -+ iotable_init(bcm2709_io_desc, ARRAY_SIZE(bcm2709_io_desc)); -+} -+ -+#ifdef SYSTEM_TIMER -+ -+/* The STC is a free running counter that increments at the rate of 1MHz */ -+#define STC_FREQ_HZ 1000000 -+ -+static inline uint32_t timer_read(void) -+{ -+ /* STC: a free running counter that increments at the rate of 1MHz */ -+ return readl(__io_address(ST_BASE + 0x04)); -+} -+ -+static unsigned long bcm2709_read_current_timer(void) -+{ -+ return timer_read(); -+} -+ -+static u64 notrace bcm2709_read_sched_clock(void) -+{ -+ return timer_read(); -+} -+ -+static cycle_t clksrc_read(struct clocksource *cs) -+{ -+ return timer_read(); -+} -+ -+static struct clocksource clocksource_stc = { -+ .name = "stc", -+ .rating = 300, -+ .read = clksrc_read, -+ .mask = CLOCKSOURCE_MASK(32), -+ .flags = CLOCK_SOURCE_IS_CONTINUOUS, -+}; -+ -+unsigned long frc_clock_ticks32(void) -+{ -+ return timer_read(); -+} -+ -+static void __init bcm2709_clocksource_init(void) -+{ -+ if (clocksource_register_hz(&clocksource_stc, STC_FREQ_HZ)) { -+ printk(KERN_ERR "timer: failed to initialize clock " -+ "source %s\n", clocksource_stc.name); -+ } -+} -+#endif -+ -+struct clk __init *bcm2709_clk_register(const char *name, unsigned long fixed_rate) -+{ -+ struct clk *clk; -+ -+ clk = clk_register_fixed_rate(NULL, name, NULL, CLK_IS_ROOT, -+ fixed_rate); -+ if (IS_ERR(clk)) -+ pr_err("%s not registered\n", name); -+ -+ return clk; -+} -+ -+void __init bcm2709_register_clkdev(struct clk *clk, const char *name) -+{ -+ int ret; -+ -+ ret = clk_register_clkdev(clk, NULL, name); -+ if (ret) -+ pr_err("%s alias not registered\n", name); -+} -+ -+void __init bcm2709_init_clocks(void) -+{ -+ struct clk *clk; -+ -+ clk = bcm2709_clk_register("uart0_clk", uart_clock); -+ bcm2709_register_clkdev(clk, "dev:f1"); -+ -+ clk = bcm2709_clk_register("sdhost_clk", 250000000); -+ bcm2709_register_clkdev(clk, "mmc-bcm2835.0"); -+ bcm2709_register_clkdev(clk, "bcm2708_spi.0"); -+ bcm2709_register_clkdev(clk, "bcm2708_i2c.0"); -+ bcm2709_register_clkdev(clk, "bcm2708_i2c.1"); -+} -+ -+#define UART0_IRQ { IRQ_UART, 0 /*NO_IRQ*/ } -+#define UART0_DMA { 15, 14 } -+ -+AMBA_DEVICE(uart0, "dev:f1", UART0, NULL); -+ -+static struct amba_device *amba_devs[] __initdata = { -+ &uart0_device, -+}; -+ -+static u64 fb_dmamask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON); -+ -+static struct platform_device bcm2708_fb_device = { -+ .name = "bcm2708_fb", -+ .id = -1, /* only one bcm2708_fb */ -+ .resource = NULL, -+ .num_resources = 0, -+ .dev = { -+ .dma_mask = &fb_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON), -+ }, -+}; -+ -+static struct resource bcm2708_usb_resources[] = { -+ [0] = { -+ .start = USB_BASE, -+ .end = USB_BASE + SZ_128K - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = MPHI_BASE, -+ .end = MPHI_BASE + SZ_4K - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+ [2] = { -+ .start = IRQ_HOSTPORT, -+ .end = IRQ_HOSTPORT, -+ .flags = IORESOURCE_IRQ, -+ }, -+ [3] = { -+ .start = IRQ_USB, -+ .end = IRQ_USB, -+ .flags = IORESOURCE_IRQ, -+ }, -+ [4] = { -+ .start = ARM_LOCAL_BASE, -+ .end = ARM_LOCAL_BASE + SZ_4K - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+ [5] = { -+ .start = IRQ_ARM_LOCAL_MAILBOX1, -+ .end = IRQ_ARM_LOCAL_MAILBOX1, -+ .flags = IORESOURCE_IRQ -+ }, -+}; -+ -+ -+static u64 usb_dmamask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON); -+ -+static struct platform_device bcm2708_usb_device = { -+ .name = "bcm2708_usb", -+ .id = -1, /* only one bcm2708_usb */ -+ .resource = bcm2708_usb_resources, -+ .num_resources = ARRAY_SIZE(bcm2708_usb_resources), -+ .dev = { -+ .dma_mask = &usb_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON), -+ }, -+}; -+ -+static struct resource bcm2708_vcio_resources[] = { -+ { -+ .start = ARMCTRL_0_MAIL0_BASE, -+ .end = ARMCTRL_0_MAIL0_BASE + SZ_64 - 1, -+ .flags = IORESOURCE_MEM, -+ }, { -+ .start = IRQ_ARM_MAILBOX, -+ .end = IRQ_ARM_MAILBOX, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static u64 vcio_dmamask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON); -+ -+static struct platform_device bcm2708_vcio_device = { -+ .name = "bcm2708_vcio", -+ .id = -1, /* only one VideoCore I/O area */ -+ .resource = bcm2708_vcio_resources, -+ .num_resources = ARRAY_SIZE(bcm2708_vcio_resources), -+ .dev = { -+ .dma_mask = &vcio_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON), -+ }, -+}; -+ -+int __init bcm_register_device(struct platform_device *pdev) -+{ -+ int ret; -+ -+ ret = platform_device_register(pdev); -+ if (ret) -+ pr_debug("Unable to register platform device '%s': %d\n", -+ pdev->name, ret); -+ -+ return ret; -+} -+ -+/* -+ * Use these macros for platform and i2c devices that are present in the -+ * Device Tree. This way the devices are only added on non-DT systems. -+ */ -+#define bcm_register_device_dt(pdev) \ -+ if (!use_dt) bcm_register_device(pdev) -+ -+#define i2c_register_board_info_dt(busnum, info, n) \ -+ if (!use_dt) i2c_register_board_info(busnum, info, n) -+ -+int calc_rsts(int partition) -+{ -+ return PM_PASSWORD | -+ ((partition & (1 << 0)) << 0) | -+ ((partition & (1 << 1)) << 1) | -+ ((partition & (1 << 2)) << 2) | -+ ((partition & (1 << 3)) << 3) | -+ ((partition & (1 << 4)) << 4) | -+ ((partition & (1 << 5)) << 5); -+} -+ -+static void bcm2709_restart(enum reboot_mode mode, const char *cmd) -+{ -+ extern char bcm2708_reboot_mode; -+ uint32_t pm_rstc, pm_wdog; -+ uint32_t timeout = 10; -+ uint32_t pm_rsts = 0; -+ -+ if(bcm2708_reboot_mode == 'q') -+ { -+ // NOOBS < 1.3 booting with reboot=q -+ pm_rsts = readl(__io_address(PM_RSTS)); -+ pm_rsts = PM_PASSWORD | pm_rsts | PM_RSTS_HADWRQ_SET; -+ } -+ else if(bcm2708_reboot_mode == 'p') -+ { -+ // NOOBS < 1.3 halting -+ pm_rsts = readl(__io_address(PM_RSTS)); -+ pm_rsts = PM_PASSWORD | pm_rsts | PM_RSTS_HADWRH_SET; -+ } -+ else -+ { -+ pm_rsts = calc_rsts(reboot_part); -+ } -+ -+ writel(pm_rsts, __io_address(PM_RSTS)); -+ -+ /* Setup watchdog for reset */ -+ pm_rstc = readl(__io_address(PM_RSTC)); -+ -+ pm_wdog = PM_PASSWORD | (timeout & PM_WDOG_TIME_SET); // watchdog timer = timer clock / 16; need password (31:16) + value (11:0) -+ pm_rstc = PM_PASSWORD | (pm_rstc & PM_RSTC_WRCFG_CLR) | PM_RSTC_WRCFG_FULL_RESET; -+ -+ writel(pm_wdog, __io_address(PM_WDOG)); -+ writel(pm_rstc, __io_address(PM_RSTC)); -+} -+ -+/* We can't really power off, but if we do the normal reset scheme, and indicate to bootcode.bin not to reboot, then most of the chip will be powered off */ -+static void bcm2709_power_off(void) -+{ -+ extern char bcm2708_reboot_mode; -+ if(bcm2708_reboot_mode == 'q') -+ { -+ // NOOBS < v1.3 -+ bcm2709_restart('p', ""); -+ } -+ else -+ { -+ /* partition 63 is special code for HALT the bootloader knows not to boot*/ -+ reboot_part = 63; -+ /* continue with normal reset mechanism */ -+ bcm2709_restart(0, ""); -+ } -+} -+ -+static void __init bcm2709_init_uart1(void) -+{ -+ struct device_node *np; -+ -+ np = of_find_compatible_node(NULL, NULL, "brcm,bcm2835-aux-uart"); -+ if (of_device_is_available(np)) { -+ pr_info("bcm2709: Mini UART enabled\n"); -+ writel(1, __io_address(UART1_BASE + 0x4)); -+ } -+} -+ -+#ifdef CONFIG_OF -+static void __init bcm2709_dt_init(void) -+{ -+ int ret; -+ -+ of_clk_init(NULL); -+ ret = of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); -+ if (ret) { -+ pr_err("of_platform_populate failed: %d\n", ret); -+ /* Proceed as if CONFIG_OF was not defined */ -+ } else { -+ use_dt = 1; -+ } -+} -+#else -+static void __init bcm2709_dt_init(void) { } -+#endif /* CONFIG_OF */ -+ -+void __init bcm2709_init(void) -+{ -+ int i; -+ -+#if defined(CONFIG_BCM_VC_CMA) -+ vc_cma_early_init(); -+#endif -+ printk("bcm2709.uart_clock = %d\n", uart_clock); -+ pm_power_off = bcm2709_power_off; -+ -+ bcm2709_init_clocks(); -+ bcm2709_dt_init(); -+ -+ bcm_register_device(&bcm2708_vcio_device); -+#ifdef CONFIG_BCM2708_GPIO -+ bcm_register_device_dt(&bcm2708_gpio_device); -+#endif -+ bcm_register_device_dt(&bcm2708_fb_device); -+ bcm_register_device_dt(&bcm2708_usb_device); -+ -+ bcm2708_init_led(); -+ bcm2708_init_uart1(); -+ -+ if (!use_dt) { -+ for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { -+ struct amba_device *d = amba_devs[i]; -+ amba_device_register(d, &iomem_resource); -+ } -+ } -+ system_rev = boardrev; -+ system_serial_low = serial; -+} -+ -+#ifdef SYSTEM_TIMER -+static void timer_set_mode(enum clock_event_mode mode, -+ struct clock_event_device *clk) -+{ -+ switch (mode) { -+ case CLOCK_EVT_MODE_ONESHOT: /* Leave the timer disabled, .set_next_event will enable it */ -+ case CLOCK_EVT_MODE_SHUTDOWN: -+ break; -+ case CLOCK_EVT_MODE_PERIODIC: -+ -+ case CLOCK_EVT_MODE_UNUSED: -+ case CLOCK_EVT_MODE_RESUME: -+ -+ default: -+ printk(KERN_ERR "timer_set_mode: unhandled mode:%d\n", -+ (int)mode); -+ break; -+ } -+ -+} -+ -+static int timer_set_next_event(unsigned long cycles, -+ struct clock_event_device *unused) -+{ -+ unsigned long stc; -+ do { -+ stc = readl(__io_address(ST_BASE + 0x04)); -+ /* We could take a FIQ here, which may push ST above STC3 */ -+ writel(stc + cycles, __io_address(ST_BASE + 0x18)); -+ } while ((signed long) cycles >= 0 && -+ (signed long) (readl(__io_address(ST_BASE + 0x04)) - stc) -+ >= (signed long) cycles); -+ return 0; -+} -+ -+static struct clock_event_device timer0_clockevent = { -+ .name = "timer0", -+ .shift = 32, -+ .features = CLOCK_EVT_FEAT_ONESHOT, -+ .set_mode = timer_set_mode, -+ .set_next_event = timer_set_next_event, -+}; -+ -+/* -+ * IRQ handler for the timer -+ */ -+static irqreturn_t bcm2709_timer_interrupt(int irq, void *dev_id) -+{ -+ struct clock_event_device *evt = &timer0_clockevent; -+ -+ writel(1 << 3, __io_address(ST_BASE + 0x00)); /* stcs clear timer int */ -+ -+ evt->event_handler(evt); -+ -+ return IRQ_HANDLED; -+} -+ -+static struct irqaction bcm2709_timer_irq = { -+ .name = "BCM2709 Timer Tick", -+ .flags = IRQF_TIMER | IRQF_IRQPOLL, -+ .handler = bcm2709_timer_interrupt, -+}; -+ -+/* -+ * Set up timer interrupt, and return the current time in seconds. -+ */ -+ -+static struct delay_timer bcm2709_delay_timer = { -+ .read_current_timer = bcm2709_read_current_timer, -+ .freq = STC_FREQ_HZ, -+}; -+ -+static void __init bcm2709_timer_init(void) -+{ -+ /* init high res timer */ -+ bcm2709_clocksource_init(); -+ -+ /* -+ * Make irqs happen for the system timer -+ */ -+ setup_irq(IRQ_TIMER3, &bcm2709_timer_irq); -+ -+ sched_clock_register(bcm2709_read_sched_clock, 32, STC_FREQ_HZ); -+ -+ timer0_clockevent.mult = -+ div_sc(STC_FREQ_HZ, NSEC_PER_SEC, timer0_clockevent.shift); -+ timer0_clockevent.max_delta_ns = -+ clockevent_delta2ns(0xffffffff, &timer0_clockevent); -+ timer0_clockevent.min_delta_ns = -+ clockevent_delta2ns(0xf, &timer0_clockevent); -+ -+ timer0_clockevent.cpumask = cpumask_of(0); -+ clockevents_register_device(&timer0_clockevent); -+ -+ register_current_timer_delay(&bcm2709_delay_timer); -+} -+ -+#else -+ -+static void __init bcm2709_timer_init(void) -+{ -+ extern void dc4_arch_timer_init(void); -+ // timer control -+ writel(0, __io_address(ARM_LOCAL_CONTROL)); -+ // timer pre_scaler -+ writel(0x80000000, __io_address(ARM_LOCAL_PRESCALER)); // 19.2MHz -+ //writel(0x06AAAAAB, __io_address(ARM_LOCAL_PRESCALER)); // 1MHz -+ -+ if (use_dt) -+ { -+ of_clk_init(NULL); -+ clocksource_of_init(); -+ } -+ else -+ dc4_arch_timer_init(); -+} -+ -+#endif -+ -+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) -+#include <linux/leds.h> -+ -+static struct gpio_led bcm2709_leds[] = { -+ [0] = { -+ .gpio = 16, -+ .name = "led0", -+ .default_trigger = "mmc0", -+ .active_low = 1, -+ }, -+}; -+ -+static struct gpio_led_platform_data bcm2709_led_pdata = { -+ .num_leds = ARRAY_SIZE(bcm2709_leds), -+ .leds = bcm2709_leds, -+}; -+ -+static struct platform_device bcm2709_led_device = { -+ .name = "leds-gpio", -+ .id = -1, -+ .dev = { -+ .platform_data = &bcm2709_led_pdata, -+ }, -+}; -+ -+static void __init bcm2709_init_led(void) -+{ -+ bcm2709_leds[0].gpio = disk_led_gpio; -+ bcm2709_leds[0].active_low = disk_led_active_low; -+ bcm_register_device_dt(&bcm2709_led_device); -+} -+#else -+static inline void bcm2709_init_led(void) -+{ -+} -+#endif -+ -+void __init bcm2709_init_early(void) -+{ -+ /* -+ * Some devices allocate their coherent buffers from atomic -+ * context. Increase size of atomic coherent pool to make sure such -+ * the allocations won't fail. -+ */ -+ init_dma_coherent_pool_size(SZ_4M); -+} -+ -+static void __init board_reserve(void) -+{ -+#if defined(CONFIG_BCM_VC_CMA) -+ vc_cma_reserve(); -+#endif -+} -+ -+ -+#ifdef CONFIG_SMP -+#include <linux/smp.h> -+ -+#include <mach/hardware.h> -+#include <asm/cacheflush.h> -+#include <asm/smp_plat.h> -+int dc4=0; -+//void dc4_log(unsigned x) { if (dc4) writel((x), __io_address(ST_BASE+10 + raw_smp_processor_id()*4)); } -+void dc4_log_dead(unsigned x) { if (dc4) writel((readl(__io_address(ST_BASE+0x10 + raw_smp_processor_id()*4)) & 0xffff) | ((x)<<16), __io_address(ST_BASE+0x10 + raw_smp_processor_id()*4)); } -+ -+static void bcm2835_send_doorbell(const struct cpumask *mask, unsigned int irq) -+{ -+ int cpu; -+ /* -+ * Ensure that stores to Normal memory are visible to the -+ * other CPUs before issuing the IPI. -+ */ -+ dsb(); -+ -+ /* Convert our logical CPU mask into a physical one. */ -+ for_each_cpu(cpu, mask) -+ { -+ /* submit softirq */ -+ writel(1<<irq, __io_address(ARM_LOCAL_MAILBOX0_SET0 + 0x10 * MPIDR_AFFINITY_LEVEL(cpu_logical_map(cpu), 0))); -+ } -+} -+ -+void __init bcm2709_smp_init_cpus(void) -+{ -+ void secondary_startup(void); -+ unsigned int i, ncores; -+ -+ ncores = 4; // xxx scu_get_core_count(NULL); -+ printk("[%s] enter (%x->%x)\n", __FUNCTION__, (unsigned)virt_to_phys((void *)secondary_startup), (unsigned)__io_address(ST_BASE + 0x10)); -+ printk("[%s] ncores=%d\n", __FUNCTION__, ncores); -+ -+ for (i = 0; i < ncores; i++) { -+ set_cpu_possible(i, true); -+ /* enable IRQ (not FIQ) */ -+ writel(0x1, __io_address(ARM_LOCAL_MAILBOX_INT_CONTROL0 + 0x4 * i)); -+ //writel(0xf, __io_address(ARM_LOCAL_TIMER_INT_CONTROL0 + 0x4 * i)); -+ } -+ set_smp_cross_call(bcm2835_send_doorbell); -+} -+ -+/* -+ * for arch/arm/kernel/smp.c:smp_prepare_cpus(unsigned int max_cpus) -+ */ -+void __init bcm2709_smp_prepare_cpus(unsigned int max_cpus) -+{ -+ //void __iomem *scu_base; -+ -+ printk("[%s] enter\n", __FUNCTION__); -+ //scu_base = scu_base_addr(); -+ //scu_enable(scu_base); -+} -+ -+/* -+ * for linux/arch/arm/kernel/smp.c:secondary_start_kernel(void) -+ */ -+void __cpuinit bcm2709_secondary_init(unsigned int cpu) -+{ -+ printk("[%s] enter cpu:%d\n", __FUNCTION__, cpu); -+ //gic_secondary_init(0); -+} -+ -+/* -+ * for linux/arch/arm/kernel/smp.c:__cpu_up(..) -+ */ -+int __cpuinit bcm2709_boot_secondary(unsigned int cpu, struct task_struct *idle) -+{ -+ void secondary_startup(void); -+ void *mbox_set = __io_address(ARM_LOCAL_MAILBOX3_SET0 + 0x10 * MPIDR_AFFINITY_LEVEL(cpu_logical_map(cpu), 0)); -+ void *mbox_clr = __io_address(ARM_LOCAL_MAILBOX3_CLR0 + 0x10 * MPIDR_AFFINITY_LEVEL(cpu_logical_map(cpu), 0)); -+ unsigned secondary_boot = (unsigned)virt_to_phys((void *)secondary_startup); -+ int timeout=20; -+ unsigned t = -1; -+ //printk("[%s] enter cpu:%d (%x->%p) %x\n", __FUNCTION__, cpu, secondary_boot, wake, readl(wake)); -+ -+ dsb(); -+ BUG_ON(readl(mbox_clr) != 0); -+ writel(secondary_boot, mbox_set); -+ -+ while (--timeout > 0) { -+ t = readl(mbox_clr); -+ if (t == 0) break; -+ cpu_relax(); -+ } -+ if (timeout==0) -+ printk("[%s] cpu:%d failed to start (%x)\n", __FUNCTION__, cpu, t); -+ else -+ printk("[%s] cpu:%d started (%x) %d\n", __FUNCTION__, cpu, t, timeout); -+ -+ return 0; -+} -+ -+ -+struct smp_operations bcm2709_smp_ops __initdata = { -+ .smp_init_cpus = bcm2709_smp_init_cpus, -+ .smp_prepare_cpus = bcm2709_smp_prepare_cpus, -+ .smp_secondary_init = bcm2709_secondary_init, -+ .smp_boot_secondary = bcm2709_boot_secondary, -+}; -+#endif -+ -+static const char * const bcm2709_compat[] = { -+ "brcm,bcm2709", -+ "brcm,bcm2708", /* Could use bcm2708 in a pinch */ -+ NULL -+}; -+ -+MACHINE_START(BCM2709, "BCM2709") -+ /* Maintainer: Broadcom Europe Ltd. */ -+#ifdef CONFIG_SMP -+ .smp = smp_ops(bcm2709_smp_ops), -+#endif -+ .map_io = bcm2709_map_io, -+ .init_irq = bcm2709_init_irq, -+ .init_time = bcm2709_timer_init, -+ .init_machine = bcm2709_init, -+ .init_early = bcm2709_init_early, -+ .reserve = board_reserve, -+ .restart = bcm2709_restart, -+ .dt_compat = bcm2709_compat, -+MACHINE_END -+ -+MACHINE_START(BCM2708, "BCM2709") -+ /* Maintainer: Broadcom Europe Ltd. */ -+#ifdef CONFIG_SMP -+ .smp = smp_ops(bcm2709_smp_ops), -+#endif -+ .map_io = bcm2709_map_io, -+ .init_irq = bcm2709_init_irq, -+ .init_time = bcm2709_timer_init, -+ .init_machine = bcm2709_init, -+ .init_early = bcm2709_init_early, -+ .reserve = board_reserve, -+ .restart = bcm2709_restart, -+ .dt_compat = bcm2709_compat, -+MACHINE_END -+ -+module_param(boardrev, uint, 0644); -+module_param(serial, uint, 0644); -+module_param(uart_clock, uint, 0644); -+module_param(disk_led_gpio, uint, 0644); -+module_param(disk_led_active_low, uint, 0644); -+module_param(reboot_part, uint, 0644); ---- /dev/null -+++ b/arch/arm/mach-bcm2709/bcm2709.h -@@ -0,0 +1,49 @@ -+/* -+ * linux/arch/arm/mach-bcm2708/bcm2708.h -+ * -+ * BCM2708 machine support header -+ * -+ * Copyright (C) 2010 Broadcom -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+ -+#ifndef __BCM2708_BCM2708_H -+#define __BCM2708_BCM2708_H -+ -+#include <linux/amba/bus.h> -+ -+extern void __init bcm2708_init(void); -+extern void __init bcm2708_init_irq(void); -+extern void __init bcm2708_map_io(void); -+extern struct sys_timer bcm2708_timer; -+extern unsigned int mmc_status(struct device *dev); -+ -+#define AMBA_DEVICE(name, busid, base, plat) \ -+static struct amba_device name##_device = { \ -+ .dev = { \ -+ .coherent_dma_mask = ~0, \ -+ .init_name = busid, \ -+ .platform_data = plat, \ -+ }, \ -+ .res = { \ -+ .start = base##_BASE, \ -+ .end = (base##_BASE) + SZ_4K - 1,\ -+ .flags = IORESOURCE_MEM, \ -+ }, \ -+ .irq = base##_IRQ, \ -+} -+ -+#endif ---- /dev/null -+++ b/arch/arm/mach-bcm2709/delay.S -@@ -0,0 +1,21 @@ -+/* -+ * linux/arch/arm/lib/delay.S -+ * -+ * Copyright (C) 1995, 1996 Russell King -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+#include <linux/linkage.h> -+#include <asm/assembler.h> -+#include <asm/param.h> -+ -+ .text -+.align 3 @ 8 byte alignment seems to be needed to avoid fetching stalls -+@ Delay routine -+ENTRY(bcm2708_delay) -+ subs r0, r0, #1 -+ bhi bcm2708_delay -+ mov pc, lr -+ENDPROC(bcm2708_delay) ---- /dev/null -+++ b/arch/arm/mach-bcm2709/include/mach/arm_control.h -@@ -0,0 +1,493 @@ -+/* -+ * linux/arch/arm/mach-bcm2708/arm_control.h -+ * -+ * Copyright (C) 2010 Broadcom -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+ -+#ifndef __BCM2708_ARM_CONTROL_H -+#define __BCM2708_ARM_CONTROL_H -+ -+/* -+ * Definitions and addresses for the ARM CONTROL logic -+ * This file is manually generated. -+ */ -+ -+#define ARM_BASE 0x7E00B000 -+ -+/* Basic configuration */ -+#define ARM_CONTROL0 HW_REGISTER_RW(ARM_BASE+0x000) -+#define ARM_C0_SIZ128M 0x00000000 -+#define ARM_C0_SIZ256M 0x00000001 -+#define ARM_C0_SIZ512M 0x00000002 -+#define ARM_C0_SIZ1G 0x00000003 -+#define ARM_C0_BRESP0 0x00000000 -+#define ARM_C0_BRESP1 0x00000004 -+#define ARM_C0_BRESP2 0x00000008 -+#define ARM_C0_BOOTHI 0x00000010 -+#define ARM_C0_UNUSED05 0x00000020 /* free */ -+#define ARM_C0_FULLPERI 0x00000040 -+#define ARM_C0_UNUSED78 0x00000180 /* free */ -+#define ARM_C0_JTAGMASK 0x00000E00 -+#define ARM_C0_JTAGOFF 0x00000000 -+#define ARM_C0_JTAGBASH 0x00000800 /* Debug on GPIO off */ -+#define ARM_C0_JTAGGPIO 0x00000C00 /* Debug on GPIO on */ -+#define ARM_C0_APROTMSK 0x0000F000 -+#define ARM_C0_DBG0SYNC 0x00010000 /* VPU0 halt sync */ -+#define ARM_C0_DBG1SYNC 0x00020000 /* VPU1 halt sync */ -+#define ARM_C0_SWDBGREQ 0x00040000 /* HW debug request */ -+#define ARM_C0_PASSHALT 0x00080000 /* ARM halt passed to debugger */ -+#define ARM_C0_PRIO_PER 0x00F00000 /* per priority mask */ -+#define ARM_C0_PRIO_L2 0x0F000000 -+#define ARM_C0_PRIO_UC 0xF0000000 -+ -+#define ARM_C0_APROTPASS 0x0000A000 /* Translate 1:1 */ -+#define ARM_C0_APROTUSER 0x00000000 /* Only user mode */ -+#define ARM_C0_APROTSYST 0x0000F000 /* Only system mode */ -+ -+ -+#define ARM_CONTROL1 HW_REGISTER_RW(ARM_BASE+0x440) -+#define ARM_C1_TIMER 0x00000001 /* re-route timer IRQ to VC */ -+#define ARM_C1_MAIL 0x00000002 /* re-route Mail IRQ to VC */ -+#define ARM_C1_BELL0 0x00000004 /* re-route Doorbell 0 to VC */ -+#define ARM_C1_BELL1 0x00000008 /* re-route Doorbell 1 to VC */ -+#define ARM_C1_PERSON 0x00000100 /* peripherals on */ -+#define ARM_C1_REQSTOP 0x00000200 /* ASYNC bridge request stop */ -+ -+#define ARM_STATUS HW_REGISTER_RW(ARM_BASE+0x444) -+#define ARM_S_ACKSTOP 0x80000000 /* Bridge stopped */ -+#define ARM_S_READPEND 0x000003FF /* pending reads counter */ -+#define ARM_S_WRITPEND 0x000FFC00 /* pending writes counter */ -+ -+#define ARM_ERRHALT HW_REGISTER_RW(ARM_BASE+0x448) -+#define ARM_EH_PERIBURST 0x00000001 /* Burst write seen on peri bus */ -+#define ARM_EH_ILLADDRS1 0x00000002 /* Address bits 25-27 error */ -+#define ARM_EH_ILLADDRS2 0x00000004 /* Address bits 31-28 error */ -+#define ARM_EH_VPU0HALT 0x00000008 /* VPU0 halted & in debug mode */ -+#define ARM_EH_VPU1HALT 0x00000010 /* VPU1 halted & in debug mode */ -+#define ARM_EH_ARMHALT 0x00000020 /* ARM in halted debug mode */ -+ -+#define ARM_ID_SECURE HW_REGISTER_RW(ARM_BASE+0x00C) -+#define ARM_ID HW_REGISTER_RW(ARM_BASE+0x44C) -+#define ARM_IDVAL 0x364D5241 -+ -+/* Translation memory */ -+#define ARM_TRANSLATE HW_REGISTER_RW(ARM_BASE+0x100) -+/* 32 locations: 0x100.. 0x17F */ -+/* 32 spare means we CAN go to 64 pages.... */ -+ -+ -+/* Interrupts */ -+#define ARM_IRQ_PEND0 HW_REGISTER_RW(ARM_BASE+0x200) /* Top IRQ bits */ -+#define ARM_I0_TIMER 0x00000001 /* timer IRQ */ -+#define ARM_I0_MAIL 0x00000002 /* Mail IRQ */ -+#define ARM_I0_BELL0 0x00000004 /* Doorbell 0 */ -+#define ARM_I0_BELL1 0x00000008 /* Doorbell 1 */ -+#define ARM_I0_BANK1 0x00000100 /* Bank1 IRQ */ -+#define ARM_I0_BANK2 0x00000200 /* Bank2 IRQ */ -+ -+#define ARM_IRQ_PEND1 HW_REGISTER_RW(ARM_BASE+0x204) /* All bank1 IRQ bits */ -+/* todo: all I1_interrupt sources */ -+#define ARM_IRQ_PEND2 HW_REGISTER_RW(ARM_BASE+0x208) /* All bank2 IRQ bits */ -+/* todo: all I2_interrupt sources */ -+ -+#define ARM_IRQ_FAST HW_REGISTER_RW(ARM_BASE+0x20C) /* FIQ control */ -+#define ARM_IF_INDEX 0x0000007F /* FIQ select */ -+#define ARM_IF_ENABLE 0x00000080 /* FIQ enable */ -+#define ARM_IF_VCMASK 0x0000003F /* FIQ = (index from VC source) */ -+#define ARM_IF_TIMER 0x00000040 /* FIQ = ARM timer */ -+#define ARM_IF_MAIL 0x00000041 /* FIQ = ARM Mail */ -+#define ARM_IF_BELL0 0x00000042 /* FIQ = ARM Doorbell 0 */ -+#define ARM_IF_BELL1 0x00000043 /* FIQ = ARM Doorbell 1 */ -+#define ARM_IF_VP0HALT 0x00000044 /* FIQ = VPU0 Halt seen */ -+#define ARM_IF_VP1HALT 0x00000045 /* FIQ = VPU1 Halt seen */ -+#define ARM_IF_ILLEGAL 0x00000046 /* FIQ = Illegal access seen */ -+ -+#define ARM_IRQ_ENBL1 HW_REGISTER_RW(ARM_BASE+0x210) /* Bank1 enable bits */ -+#define ARM_IRQ_ENBL2 HW_REGISTER_RW(ARM_BASE+0x214) /* Bank2 enable bits */ -+#define ARM_IRQ_ENBL3 HW_REGISTER_RW(ARM_BASE+0x218) /* ARM irqs enable bits */ -+#define ARM_IRQ_DIBL1 HW_REGISTER_RW(ARM_BASE+0x21C) /* Bank1 disable bits */ -+#define ARM_IRQ_DIBL2 HW_REGISTER_RW(ARM_BASE+0x220) /* Bank2 disable bits */ -+#define ARM_IRQ_DIBL3 HW_REGISTER_RW(ARM_BASE+0x224) /* ARM irqs disable bits */ -+#define ARM_IE_TIMER 0x00000001 /* Timer IRQ */ -+#define ARM_IE_MAIL 0x00000002 /* Mail IRQ */ -+#define ARM_IE_BELL0 0x00000004 /* Doorbell 0 */ -+#define ARM_IE_BELL1 0x00000008 /* Doorbell 1 */ -+#define ARM_IE_VP0HALT 0x00000010 /* VPU0 Halt */ -+#define ARM_IE_VP1HALT 0x00000020 /* VPU1 Halt */ -+#define ARM_IE_ILLEGAL 0x00000040 /* Illegal access seen */ -+ -+/* Timer */ -+/* For reg. fields see sp804 spec. */ -+#define ARM_T_LOAD HW_REGISTER_RW(ARM_BASE+0x400) -+#define ARM_T_VALUE HW_REGISTER_RW(ARM_BASE+0x404) -+#define ARM_T_CONTROL HW_REGISTER_RW(ARM_BASE+0x408) -+#define ARM_T_IRQCNTL HW_REGISTER_RW(ARM_BASE+0x40C) -+#define ARM_T_RAWIRQ HW_REGISTER_RW(ARM_BASE+0x410) -+#define ARM_T_MSKIRQ HW_REGISTER_RW(ARM_BASE+0x414) -+#define ARM_T_RELOAD HW_REGISTER_RW(ARM_BASE+0x418) -+#define ARM_T_PREDIV HW_REGISTER_RW(ARM_BASE+0x41c) -+#define ARM_T_FREECNT HW_REGISTER_RW(ARM_BASE+0x420) -+ -+#define TIMER_CTRL_ONESHOT (1 << 0) -+#define TIMER_CTRL_32BIT (1 << 1) -+#define TIMER_CTRL_DIV1 (0 << 2) -+#define TIMER_CTRL_DIV16 (1 << 2) -+#define TIMER_CTRL_DIV256 (2 << 2) -+#define TIMER_CTRL_IE (1 << 5) -+#define TIMER_CTRL_PERIODIC (1 << 6) -+#define TIMER_CTRL_ENABLE (1 << 7) -+#define TIMER_CTRL_DBGHALT (1 << 8) -+#define TIMER_CTRL_ENAFREE (1 << 9) -+#define TIMER_CTRL_FREEDIV_SHIFT 16) -+#define TIMER_CTRL_FREEDIV_MASK 0xff -+ -+/* Semaphores, Doorbells, Mailboxes */ -+#define ARM_SBM_OWN0 (ARM_BASE+0x800) -+#define ARM_SBM_OWN1 (ARM_BASE+0x900) -+#define ARM_SBM_OWN2 (ARM_BASE+0xA00) -+#define ARM_SBM_OWN3 (ARM_BASE+0xB00) -+ -+/* MAILBOXES -+ * Register flags are common across all -+ * owner registers. See end of this section -+ * -+ * Semaphores, Doorbells, Mailboxes Owner 0 -+ * -+ */ -+ -+#define ARM_0_SEMS HW_REGISTER_RW(ARM_SBM_OWN0+0x00) -+#define ARM_0_SEM0 HW_REGISTER_RW(ARM_SBM_OWN0+0x00) -+#define ARM_0_SEM1 HW_REGISTER_RW(ARM_SBM_OWN0+0x04) -+#define ARM_0_SEM2 HW_REGISTER_RW(ARM_SBM_OWN0+0x08) -+#define ARM_0_SEM3 HW_REGISTER_RW(ARM_SBM_OWN0+0x0C) -+#define ARM_0_SEM4 HW_REGISTER_RW(ARM_SBM_OWN0+0x10) -+#define ARM_0_SEM5 HW_REGISTER_RW(ARM_SBM_OWN0+0x14) -+#define ARM_0_SEM6 HW_REGISTER_RW(ARM_SBM_OWN0+0x18) -+#define ARM_0_SEM7 HW_REGISTER_RW(ARM_SBM_OWN0+0x1C) -+#define ARM_0_BELL0 HW_REGISTER_RW(ARM_SBM_OWN0+0x40) -+#define ARM_0_BELL1 HW_REGISTER_RW(ARM_SBM_OWN0+0x44) -+#define ARM_0_BELL2 HW_REGISTER_RW(ARM_SBM_OWN0+0x48) -+#define ARM_0_BELL3 HW_REGISTER_RW(ARM_SBM_OWN0+0x4C) -+/* MAILBOX 0 access in Owner 0 area */ -+/* Some addresses should ONLY be used by owner 0 */ -+#define ARM_0_MAIL0_WRT HW_REGISTER_RW(ARM_SBM_OWN0+0x80) /* .. 0x8C (4 locations) */ -+#define ARM_0_MAIL0_RD HW_REGISTER_RW(ARM_SBM_OWN0+0x80) /* .. 0x8C (4 locations) Normal read */ -+#define ARM_0_MAIL0_POL HW_REGISTER_RW(ARM_SBM_OWN0+0x90) /* none-pop read */ -+#define ARM_0_MAIL0_SND HW_REGISTER_RW(ARM_SBM_OWN0+0x94) /* Sender read (only LS 2 bits) */ -+#define ARM_0_MAIL0_STA HW_REGISTER_RW(ARM_SBM_OWN0+0x98) /* Status read */ -+#define ARM_0_MAIL0_CNF HW_REGISTER_RW(ARM_SBM_OWN0+0x9C) /* Config read/write */ -+/* MAILBOX 1 access in Owner 0 area */ -+/* Owner 0 should only WRITE to this mailbox */ -+#define ARM_0_MAIL1_WRT HW_REGISTER_RW(ARM_SBM_OWN0+0xA0) /* .. 0xAC (4 locations) */ -+/*#define ARM_0_MAIL1_RD HW_REGISTER_RW(ARM_SBM_OWN0+0xA0) */ /* DO NOT USE THIS !!!!! */ -+/*#define ARM_0_MAIL1_POL HW_REGISTER_RW(ARM_SBM_OWN0+0xB0) */ /* DO NOT USE THIS !!!!! */ -+/*#define ARM_0_MAIL1_SND HW_REGISTER_RW(ARM_SBM_OWN0+0xB4) */ /* DO NOT USE THIS !!!!! */ -+#define ARM_0_MAIL1_STA HW_REGISTER_RW(ARM_SBM_OWN0+0xB8) /* Status read */ -+/*#define ARM_0_MAIL1_CNF HW_REGISTER_RW(ARM_SBM_OWN0+0xBC) */ /* DO NOT USE THIS !!!!! */ -+/* General SEM, BELL, MAIL config/status */ -+#define ARM_0_SEMCLRDBG HW_REGISTER_RW(ARM_SBM_OWN0+0xE0) /* semaphore clear/debug register */ -+#define ARM_0_BELLCLRDBG HW_REGISTER_RW(ARM_SBM_OWN0+0xE4) /* Doorbells clear/debug register */ -+#define ARM_0_ALL_IRQS HW_REGISTER_RW(ARM_SBM_OWN0+0xF8) /* ALL interrupts */ -+#define ARM_0_MY_IRQS HW_REGISTER_RW(ARM_SBM_OWN0+0xFC) /* IRQS pending for owner 0 */ -+ -+/* Semaphores, Doorbells, Mailboxes Owner 1 */ -+#define ARM_1_SEMS HW_REGISTER_RW(ARM_SBM_OWN1+0x00) -+#define ARM_1_SEM0 HW_REGISTER_RW(ARM_SBM_OWN1+0x00) -+#define ARM_1_SEM1 HW_REGISTER_RW(ARM_SBM_OWN1+0x04) -+#define ARM_1_SEM2 HW_REGISTER_RW(ARM_SBM_OWN1+0x08) -+#define ARM_1_SEM3 HW_REGISTER_RW(ARM_SBM_OWN1+0x0C) -+#define ARM_1_SEM4 HW_REGISTER_RW(ARM_SBM_OWN1+0x10) -+#define ARM_1_SEM5 HW_REGISTER_RW(ARM_SBM_OWN1+0x14) -+#define ARM_1_SEM6 HW_REGISTER_RW(ARM_SBM_OWN1+0x18) -+#define ARM_1_SEM7 HW_REGISTER_RW(ARM_SBM_OWN1+0x1C) -+#define ARM_1_BELL0 HW_REGISTER_RW(ARM_SBM_OWN1+0x40) -+#define ARM_1_BELL1 HW_REGISTER_RW(ARM_SBM_OWN1+0x44) -+#define ARM_1_BELL2 HW_REGISTER_RW(ARM_SBM_OWN1+0x48) -+#define ARM_1_BELL3 HW_REGISTER_RW(ARM_SBM_OWN1+0x4C) -+/* MAILBOX 0 access in Owner 0 area */ -+/* Owner 1 should only WRITE to this mailbox */ -+#define ARM_1_MAIL0_WRT HW_REGISTER_RW(ARM_SBM_OWN1+0x80) /* .. 0x8C (4 locations) */ -+/*#define ARM_1_MAIL0_RD HW_REGISTER_RW(ARM_SBM_OWN1+0x80) */ /* DO NOT USE THIS !!!!! */ -+/*#define ARM_1_MAIL0_POL HW_REGISTER_RW(ARM_SBM_OWN1+0x90) */ /* DO NOT USE THIS !!!!! */ -+/*#define ARM_1_MAIL0_SND HW_REGISTER_RW(ARM_SBM_OWN1+0x94) */ /* DO NOT USE THIS !!!!! */ -+#define ARM_1_MAIL0_STA HW_REGISTER_RW(ARM_SBM_OWN1+0x98) /* Status read */ -+/*#define ARM_1_MAIL0_CNF HW_REGISTER_RW(ARM_SBM_OWN1+0x9C) */ /* DO NOT USE THIS !!!!! */ -+/* MAILBOX 1 access in Owner 0 area */ -+#define ARM_1_MAIL1_WRT HW_REGISTER_RW(ARM_SBM_OWN1+0xA0) /* .. 0xAC (4 locations) */ -+#define ARM_1_MAIL1_RD HW_REGISTER_RW(ARM_SBM_OWN1+0xA0) /* .. 0xAC (4 locations) Normal read */ -+#define ARM_1_MAIL1_POL HW_REGISTER_RW(ARM_SBM_OWN1+0xB0) /* none-pop read */ -+#define ARM_1_MAIL1_SND HW_REGISTER_RW(ARM_SBM_OWN1+0xB4) /* Sender read (only LS 2 bits) */ -+#define ARM_1_MAIL1_STA HW_REGISTER_RW(ARM_SBM_OWN1+0xB8) /* Status read */ -+#define ARM_1_MAIL1_CNF HW_REGISTER_RW(ARM_SBM_OWN1+0xBC) -+/* General SEM, BELL, MAIL config/status */ -+#define ARM_1_SEMCLRDBG HW_REGISTER_RW(ARM_SBM_OWN1+0xE0) /* semaphore clear/debug register */ -+#define ARM_1_BELLCLRDBG HW_REGISTER_RW(ARM_SBM_OWN1+0xE4) /* Doorbells clear/debug register */ -+#define ARM_1_MY_IRQS HW_REGISTER_RW(ARM_SBM_OWN1+0xFC) /* IRQS pending for owner 1 */ -+#define ARM_1_ALL_IRQS HW_REGISTER_RW(ARM_SBM_OWN1+0xF8) /* ALL interrupts */ -+ -+/* Semaphores, Doorbells, Mailboxes Owner 2 */ -+#define ARM_2_SEMS HW_REGISTER_RW(ARM_SBM_OWN2+0x00) -+#define ARM_2_SEM0 HW_REGISTER_RW(ARM_SBM_OWN2+0x00) -+#define ARM_2_SEM1 HW_REGISTER_RW(ARM_SBM_OWN2+0x04) -+#define ARM_2_SEM2 HW_REGISTER_RW(ARM_SBM_OWN2+0x08) -+#define ARM_2_SEM3 HW_REGISTER_RW(ARM_SBM_OWN2+0x0C) -+#define ARM_2_SEM4 HW_REGISTER_RW(ARM_SBM_OWN2+0x10) -+#define ARM_2_SEM5 HW_REGISTER_RW(ARM_SBM_OWN2+0x14) -+#define ARM_2_SEM6 HW_REGISTER_RW(ARM_SBM_OWN2+0x18) -+#define ARM_2_SEM7 HW_REGISTER_RW(ARM_SBM_OWN2+0x1C) -+#define ARM_2_BELL0 HW_REGISTER_RW(ARM_SBM_OWN2+0x40) -+#define ARM_2_BELL1 HW_REGISTER_RW(ARM_SBM_OWN2+0x44) -+#define ARM_2_BELL2 HW_REGISTER_RW(ARM_SBM_OWN2+0x48) -+#define ARM_2_BELL3 HW_REGISTER_RW(ARM_SBM_OWN2+0x4C) -+/* MAILBOX 0 access in Owner 2 area */ -+/* Owner 2 should only WRITE to this mailbox */ -+#define ARM_2_MAIL0_WRT HW_REGISTER_RW(ARM_SBM_OWN2+0x80) /* .. 0x8C (4 locations) */ -+/*#define ARM_2_MAIL0_RD HW_REGISTER_RW(ARM_SBM_OWN2+0x80) */ /* DO NOT USE THIS !!!!! */ -+/*#define ARM_2_MAIL0_POL HW_REGISTER_RW(ARM_SBM_OWN2+0x90) */ /* DO NOT USE THIS !!!!! */ -+/*#define ARM_2_MAIL0_SND HW_REGISTER_RW(ARM_SBM_OWN2+0x94) */ /* DO NOT USE THIS !!!!! */ -+#define ARM_2_MAIL0_STA HW_REGISTER_RW(ARM_SBM_OWN2+0x98) /* Status read */ -+/*#define ARM_2_MAIL0_CNF HW_REGISTER_RW(ARM_SBM_OWN2+0x9C) */ /* DO NOT USE THIS !!!!! */ -+/* MAILBOX 1 access in Owner 2 area */ -+/* Owner 2 should only WRITE to this mailbox */ -+#define ARM_2_MAIL1_WRT HW_REGISTER_RW(ARM_SBM_OWN2+0xA0) /* .. 0xAC (4 locations) */ -+/*#define ARM_2_MAIL1_RD HW_REGISTER_RW(ARM_SBM_OWN2+0xA0) */ /* DO NOT USE THIS !!!!! */ -+/*#define ARM_2_MAIL1_POL HW_REGISTER_RW(ARM_SBM_OWN2+0xB0) */ /* DO NOT USE THIS !!!!! */ -+/*#define ARM_2_MAIL1_SND HW_REGISTER_RW(ARM_SBM_OWN2+0xB4) */ /* DO NOT USE THIS !!!!! */ -+#define ARM_2_MAIL1_STA HW_REGISTER_RW(ARM_SBM_OWN2+0xB8) /* Status read */ -+/*#define ARM_2_MAIL1_CNF HW_REGISTER_RW(ARM_SBM_OWN2+0xBC) */ /* DO NOT USE THIS !!!!! */ -+/* General SEM, BELL, MAIL config/status */ -+#define ARM_2_SEMCLRDBG HW_REGISTER_RW(ARM_SBM_OWN2+0xE0) /* semaphore clear/debug register */ -+#define ARM_2_BELLCLRDBG HW_REGISTER_RW(ARM_SBM_OWN2+0xE4) /* Doorbells clear/debug register */ -+#define ARM_2_MY_IRQS HW_REGISTER_RW(ARM_SBM_OWN2+0xFC) /* IRQS pending for owner 2 */ -+#define ARM_2_ALL_IRQS HW_REGISTER_RW(ARM_SBM_OWN2+0xF8) /* ALL interrupts */ -+ -+/* Semaphores, Doorbells, Mailboxes Owner 3 */ -+#define ARM_3_SEMS HW_REGISTER_RW(ARM_SBM_OWN3+0x00) -+#define ARM_3_SEM0 HW_REGISTER_RW(ARM_SBM_OWN3+0x00) -+#define ARM_3_SEM1 HW_REGISTER_RW(ARM_SBM_OWN3+0x04) -+#define ARM_3_SEM2 HW_REGISTER_RW(ARM_SBM_OWN3+0x08) -+#define ARM_3_SEM3 HW_REGISTER_RW(ARM_SBM_OWN3+0x0C) -+#define ARM_3_SEM4 HW_REGISTER_RW(ARM_SBM_OWN3+0x10) -+#define ARM_3_SEM5 HW_REGISTER_RW(ARM_SBM_OWN3+0x14) -+#define ARM_3_SEM6 HW_REGISTER_RW(ARM_SBM_OWN3+0x18) -+#define ARM_3_SEM7 HW_REGISTER_RW(ARM_SBM_OWN3+0x1C) -+#define ARM_3_BELL0 HW_REGISTER_RW(ARM_SBM_OWN3+0x40) -+#define ARM_3_BELL1 HW_REGISTER_RW(ARM_SBM_OWN3+0x44) -+#define ARM_3_BELL2 HW_REGISTER_RW(ARM_SBM_OWN3+0x48) -+#define ARM_3_BELL3 HW_REGISTER_RW(ARM_SBM_OWN3+0x4C) -+/* MAILBOX 0 access in Owner 3 area */ -+/* Owner 3 should only WRITE to this mailbox */ -+#define ARM_3_MAIL0_WRT HW_REGISTER_RW(ARM_SBM_OWN3+0x80) /* .. 0x8C (4 locations) */ -+/*#define ARM_3_MAIL0_RD HW_REGISTER_RW(ARM_SBM_OWN3+0x80) */ /* DO NOT USE THIS !!!!! */ -+/*#define ARM_3_MAIL0_POL HW_REGISTER_RW(ARM_SBM_OWN3+0x90) */ /* DO NOT USE THIS !!!!! */ -+/*#define ARM_3_MAIL0_SND HW_REGISTER_RW(ARM_SBM_OWN3+0x94) */ /* DO NOT USE THIS !!!!! */ -+#define ARM_3_MAIL0_STA HW_REGISTER_RW(ARM_SBM_OWN3+0x98) /* Status read */ -+/*#define ARM_3_MAIL0_CNF HW_REGISTER_RW(ARM_SBM_OWN3+0x9C) */ /* DO NOT USE THIS !!!!! */ -+/* MAILBOX 1 access in Owner 3 area */ -+/* Owner 3 should only WRITE to this mailbox */ -+#define ARM_3_MAIL1_WRT HW_REGISTER_RW(ARM_SBM_OWN3+0xA0) /* .. 0xAC (4 locations) */ -+/*#define ARM_3_MAIL1_RD HW_REGISTER_RW(ARM_SBM_OWN3+0xA0) */ /* DO NOT USE THIS !!!!! */ -+/*#define ARM_3_MAIL1_POL HW_REGISTER_RW(ARM_SBM_OWN3+0xB0) */ /* DO NOT USE THIS !!!!! */ -+/*#define ARM_3_MAIL1_SND HW_REGISTER_RW(ARM_SBM_OWN3+0xB4) */ /* DO NOT USE THIS !!!!! */ -+#define ARM_3_MAIL1_STA HW_REGISTER_RW(ARM_SBM_OWN3+0xB8) /* Status read */ -+/*#define ARM_3_MAIL1_CNF HW_REGISTER_RW(ARM_SBM_OWN3+0xBC) */ /* DO NOT USE THIS !!!!! */ -+/* General SEM, BELL, MAIL config/status */ -+#define ARM_3_SEMCLRDBG HW_REGISTER_RW(ARM_SBM_OWN3+0xE0) /* semaphore clear/debug register */ -+#define ARM_3_BELLCLRDBG HW_REGISTER_RW(ARM_SBM_OWN3+0xE4) /* Doorbells clear/debug register */ -+#define ARM_3_MY_IRQS HW_REGISTER_RW(ARM_SBM_OWN3+0xFC) /* IRQS pending for owner 3 */ -+#define ARM_3_ALL_IRQS HW_REGISTER_RW(ARM_SBM_OWN3+0xF8) /* ALL interrupts */ -+ -+ -+ -+/* Mailbox flags. Valid for all owners */ -+ -+/* Mailbox status register (...0x98) */ -+#define ARM_MS_FULL 0x80000000 -+#define ARM_MS_EMPTY 0x40000000 -+#define ARM_MS_LEVEL 0x400000FF /* Max. value depdnds on mailbox depth parameter */ -+ -+/* MAILBOX config/status register (...0x9C) */ -+/* ANY write to this register clears the error bits! */ -+#define ARM_MC_IHAVEDATAIRQEN 0x00000001 /* mailbox irq enable: has data */ -+#define ARM_MC_IHAVESPACEIRQEN 0x00000002 /* mailbox irq enable: has space */ -+#define ARM_MC_OPPISEMPTYIRQEN 0x00000004 /* mailbox irq enable: Opp. is empty */ -+#define ARM_MC_MAIL_CLEAR 0x00000008 /* mailbox clear write 1, then 0 */ -+#define ARM_MC_IHAVEDATAIRQPEND 0x00000010 /* mailbox irq pending: has space */ -+#define ARM_MC_IHAVESPACEIRQPEND 0x00000020 /* mailbox irq pending: Opp. is empty */ -+#define ARM_MC_OPPISEMPTYIRQPEND 0x00000040 /* mailbox irq pending */ -+/* Bit 7 is unused */ -+#define ARM_MC_ERRNOOWN 0x00000100 /* error : none owner read from mailbox */ -+#define ARM_MC_ERROVERFLW 0x00000200 /* error : write to fill mailbox */ -+#define ARM_MC_ERRUNDRFLW 0x00000400 /* error : read from empty mailbox */ -+ -+/* Semaphore clear/debug register (...0xE0) */ -+#define ARM_SD_OWN0 0x00000003 /* Owner of sem 0 */ -+#define ARM_SD_OWN1 0x0000000C /* Owner of sem 1 */ -+#define ARM_SD_OWN2 0x00000030 /* Owner of sem 2 */ -+#define ARM_SD_OWN3 0x000000C0 /* Owner of sem 3 */ -+#define ARM_SD_OWN4 0x00000300 /* Owner of sem 4 */ -+#define ARM_SD_OWN5 0x00000C00 /* Owner of sem 5 */ -+#define ARM_SD_OWN6 0x00003000 /* Owner of sem 6 */ -+#define ARM_SD_OWN7 0x0000C000 /* Owner of sem 7 */ -+#define ARM_SD_SEM0 0x00010000 /* Status of sem 0 */ -+#define ARM_SD_SEM1 0x00020000 /* Status of sem 1 */ -+#define ARM_SD_SEM2 0x00040000 /* Status of sem 2 */ -+#define ARM_SD_SEM3 0x00080000 /* Status of sem 3 */ -+#define ARM_SD_SEM4 0x00100000 /* Status of sem 4 */ -+#define ARM_SD_SEM5 0x00200000 /* Status of sem 5 */ -+#define ARM_SD_SEM6 0x00400000 /* Status of sem 6 */ -+#define ARM_SD_SEM7 0x00800000 /* Status of sem 7 */ -+ -+/* Doorbells clear/debug register (...0xE4) */ -+#define ARM_BD_OWN0 0x00000003 /* Owner of doorbell 0 */ -+#define ARM_BD_OWN1 0x0000000C /* Owner of doorbell 1 */ -+#define ARM_BD_OWN2 0x00000030 /* Owner of doorbell 2 */ -+#define ARM_BD_OWN3 0x000000C0 /* Owner of doorbell 3 */ -+#define ARM_BD_BELL0 0x00000100 /* Status of doorbell 0 */ -+#define ARM_BD_BELL1 0x00000200 /* Status of doorbell 1 */ -+#define ARM_BD_BELL2 0x00000400 /* Status of doorbell 2 */ -+#define ARM_BD_BELL3 0x00000800 /* Status of doorbell 3 */ -+ -+/* MY IRQS register (...0xF8) */ -+#define ARM_MYIRQ_BELL 0x00000001 /* This owner has a doorbell IRQ */ -+#define ARM_MYIRQ_MAIL 0x00000002 /* This owner has a mailbox IRQ */ -+ -+/* ALL IRQS register (...0xF8) */ -+#define ARM_AIS_BELL0 0x00000001 /* Doorbell 0 IRQ pending */ -+#define ARM_AIS_BELL1 0x00000002 /* Doorbell 1 IRQ pending */ -+#define ARM_AIS_BELL2 0x00000004 /* Doorbell 2 IRQ pending */ -+#define ARM_AIS_BELL3 0x00000008 /* Doorbell 3 IRQ pending */ -+#define ARM_AIS0_HAVEDATA 0x00000010 /* MAIL 0 has data IRQ pending */ -+#define ARM_AIS0_HAVESPAC 0x00000020 /* MAIL 0 has space IRQ pending */ -+#define ARM_AIS0_OPPEMPTY 0x00000040 /* MAIL 0 opposite is empty IRQ */ -+#define ARM_AIS1_HAVEDATA 0x00000080 /* MAIL 1 has data IRQ pending */ -+#define ARM_AIS1_HAVESPAC 0x00000100 /* MAIL 1 has space IRQ pending */ -+#define ARM_AIS1_OPPEMPTY 0x00000200 /* MAIL 1 opposite is empty IRQ */ -+/* Note that bell-0, bell-1 and MAIL0 IRQ go only to the ARM */ -+/* Whilst that bell-2, bell-3 and MAIL1 IRQ go only to the VC */ -+/* */ -+/* ARM JTAG BASH */ -+/* */ -+#define AJB_BASE 0x7e2000c0 -+ -+#define AJBCONF HW_REGISTER_RW(AJB_BASE+0x00) -+#define AJB_BITS0 0x000000 -+#define AJB_BITS4 0x000004 -+#define AJB_BITS8 0x000008 -+#define AJB_BITS12 0x00000C -+#define AJB_BITS16 0x000010 -+#define AJB_BITS20 0x000014 -+#define AJB_BITS24 0x000018 -+#define AJB_BITS28 0x00001C -+#define AJB_BITS32 0x000020 -+#define AJB_BITS34 0x000022 -+#define AJB_OUT_MS 0x000040 -+#define AJB_OUT_LS 0x000000 -+#define AJB_INV_CLK 0x000080 -+#define AJB_D0_RISE 0x000100 -+#define AJB_D0_FALL 0x000000 -+#define AJB_D1_RISE 0x000200 -+#define AJB_D1_FALL 0x000000 -+#define AJB_IN_RISE 0x000400 -+#define AJB_IN_FALL 0x000000 -+#define AJB_ENABLE 0x000800 -+#define AJB_HOLD0 0x000000 -+#define AJB_HOLD1 0x001000 -+#define AJB_HOLD2 0x002000 -+#define AJB_HOLD3 0x003000 -+#define AJB_RESETN 0x004000 -+#define AJB_CLKSHFT 16 -+#define AJB_BUSY 0x80000000 -+#define AJBTMS HW_REGISTER_RW(AJB_BASE+0x04) -+#define AJBTDI HW_REGISTER_RW(AJB_BASE+0x08) -+#define AJBTDO HW_REGISTER_RW(AJB_BASE+0x0c) -+ -+#define ARM_LOCAL_BASE 0x40000000 -+#define ARM_LOCAL_CONTROL HW_REGISTER_RW(ARM_LOCAL_BASE+0x000) -+#define ARM_LOCAL_PRESCALER HW_REGISTER_RW(ARM_LOCAL_BASE+0x008) -+#define ARM_LOCAL_GPU_INT_ROUTING HW_REGISTER_RW(ARM_LOCAL_BASE+0x00C) -+#define ARM_LOCAL_PM_ROUTING_SET HW_REGISTER_RW(ARM_LOCAL_BASE+0x010) -+#define ARM_LOCAL_PM_ROUTING_CLR HW_REGISTER_RW(ARM_LOCAL_BASE+0x014) -+#define ARM_LOCAL_TIMER_LS HW_REGISTER_RW(ARM_LOCAL_BASE+0x01C) -+#define ARM_LOCAL_TIMER_MS HW_REGISTER_RW(ARM_LOCAL_BASE+0x020) -+#define ARM_LOCAL_INT_ROUTING HW_REGISTER_RW(ARM_LOCAL_BASE+0x024) -+#define ARM_LOCAL_AXI_COUNT HW_REGISTER_RW(ARM_LOCAL_BASE+0x02C) -+#define ARM_LOCAL_AXI_IRQ HW_REGISTER_RW(ARM_LOCAL_BASE+0x030) -+#define ARM_LOCAL_TIMER_CONTROL HW_REGISTER_RW(ARM_LOCAL_BASE+0x034) -+#define ARM_LOCAL_TIMER_WRITE HW_REGISTER_RW(ARM_LOCAL_BASE+0x038) -+ -+#define ARM_LOCAL_TIMER_INT_CONTROL0 HW_REGISTER_RW(ARM_LOCAL_BASE+0x040) -+#define ARM_LOCAL_TIMER_INT_CONTROL1 HW_REGISTER_RW(ARM_LOCAL_BASE+0x044) -+#define ARM_LOCAL_TIMER_INT_CONTROL2 HW_REGISTER_RW(ARM_LOCAL_BASE+0x048) -+#define ARM_LOCAL_TIMER_INT_CONTROL3 HW_REGISTER_RW(ARM_LOCAL_BASE+0x04C) -+ -+#define ARM_LOCAL_MAILBOX_INT_CONTROL0 HW_REGISTER_RW(ARM_LOCAL_BASE+0x050) -+#define ARM_LOCAL_MAILBOX_INT_CONTROL1 HW_REGISTER_RW(ARM_LOCAL_BASE+0x054) -+#define ARM_LOCAL_MAILBOX_INT_CONTROL2 HW_REGISTER_RW(ARM_LOCAL_BASE+0x058) -+#define ARM_LOCAL_MAILBOX_INT_CONTROL3 HW_REGISTER_RW(ARM_LOCAL_BASE+0x05C) -+ -+#define ARM_LOCAL_IRQ_PENDING0 HW_REGISTER_RW(ARM_LOCAL_BASE+0x060) -+#define ARM_LOCAL_IRQ_PENDING1 HW_REGISTER_RW(ARM_LOCAL_BASE+0x064) -+#define ARM_LOCAL_IRQ_PENDING2 HW_REGISTER_RW(ARM_LOCAL_BASE+0x068) -+#define ARM_LOCAL_IRQ_PENDING3 HW_REGISTER_RW(ARM_LOCAL_BASE+0x06C) -+ -+#define ARM_LOCAL_FIQ_PENDING0 HW_REGISTER_RW(ARM_LOCAL_BASE+0x070) -+#define ARM_LOCAL_FIQ_PENDING1 HW_REGISTER_RW(ARM_LOCAL_BASE+0x074) -+#define ARM_LOCAL_FIQ_PENDING2 HW_REGISTER_RW(ARM_LOCAL_BASE+0x078) -+#define ARM_LOCAL_FIQ_PENDING3 HW_REGISTER_RW(ARM_LOCAL_BASE+0x07C) -+ -+#define ARM_LOCAL_MAILBOX0_SET0 HW_REGISTER_RW(ARM_LOCAL_BASE+0x080) -+#define ARM_LOCAL_MAILBOX1_SET0 HW_REGISTER_RW(ARM_LOCAL_BASE+0x084) -+#define ARM_LOCAL_MAILBOX2_SET0 HW_REGISTER_RW(ARM_LOCAL_BASE+0x088) -+#define ARM_LOCAL_MAILBOX3_SET0 HW_REGISTER_RW(ARM_LOCAL_BASE+0x08C) -+ -+#define ARM_LOCAL_MAILBOX0_SET1 HW_REGISTER_RW(ARM_LOCAL_BASE+0x090) -+#define ARM_LOCAL_MAILBOX1_SET1 HW_REGISTER_RW(ARM_LOCAL_BASE+0x094) -+#define ARM_LOCAL_MAILBOX2_SET1 HW_REGISTER_RW(ARM_LOCAL_BASE+0x098) -+#define ARM_LOCAL_MAILBOX3_SET1 HW_REGISTER_RW(ARM_LOCAL_BASE+0x09C) -+ -+#define ARM_LOCAL_MAILBOX0_SET2 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0A0) -+#define ARM_LOCAL_MAILBOX1_SET2 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0A4) -+#define ARM_LOCAL_MAILBOX2_SET2 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0A8) -+#define ARM_LOCAL_MAILBOX3_SET2 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0AC) -+ -+#define ARM_LOCAL_MAILBOX0_SET3 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0B0) -+#define ARM_LOCAL_MAILBOX1_SET3 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0B4) -+#define ARM_LOCAL_MAILBOX2_SET3 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0B8) -+#define ARM_LOCAL_MAILBOX3_SET3 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0BC) -+ -+#define ARM_LOCAL_MAILBOX0_CLR0 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0C0) -+#define ARM_LOCAL_MAILBOX1_CLR0 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0C4) -+#define ARM_LOCAL_MAILBOX2_CLR0 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0C8) -+#define ARM_LOCAL_MAILBOX3_CLR0 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0CC) -+ -+#define ARM_LOCAL_MAILBOX0_CLR1 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0D0) -+#define ARM_LOCAL_MAILBOX1_CLR1 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0D4) -+#define ARM_LOCAL_MAILBOX2_CLR1 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0D8) -+#define ARM_LOCAL_MAILBOX3_CLR1 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0DC) -+ -+#define ARM_LOCAL_MAILBOX0_CLR2 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0E0) -+#define ARM_LOCAL_MAILBOX1_CLR2 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0E4) -+#define ARM_LOCAL_MAILBOX2_CLR2 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0E8) -+#define ARM_LOCAL_MAILBOX3_CLR2 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0EC) -+ -+#define ARM_LOCAL_MAILBOX0_CLR3 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0F0) -+#define ARM_LOCAL_MAILBOX1_CLR3 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0F4) -+#define ARM_LOCAL_MAILBOX2_CLR3 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0F8) -+#define ARM_LOCAL_MAILBOX3_CLR3 HW_REGISTER_RW(ARM_LOCAL_BASE+0x0FC) -+ -+#endif ---- /dev/null -+++ b/arch/arm/mach-bcm2709/include/mach/barriers.h -@@ -0,0 +1,3 @@ -+#define mb() dsb() -+#define rmb() dsb() -+#define wmb() mb() ---- /dev/null -+++ b/arch/arm/mach-bcm2709/include/mach/clkdev.h -@@ -0,0 +1,7 @@ -+#ifndef __ASM_MACH_CLKDEV_H -+#define __ASM_MACH_CLKDEV_H -+ -+#define __clk_get(clk) ({ 1; }) -+#define __clk_put(clk) do { } while (0) -+ -+#endif ---- /dev/null -+++ b/arch/arm/mach-bcm2709/include/mach/debug-macro.S -@@ -0,0 +1,22 @@ -+/* arch/arm/mach-bcm2708/include/mach/debug-macro.S -+ * -+ * Debugging macro include header -+ * -+ * Copyright (C) 2010 Broadcom -+ * Copyright (C) 1994-1999 Russell King -+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+*/ -+ -+#include <mach/platform.h> -+ -+ .macro addruart, rp, rv, tmp -+ ldr \rp, =UART0_BASE -+ ldr \rv, =IO_ADDRESS(UART0_BASE) -+ .endm -+ -+#include <debug/pl01x.S> ---- /dev/null -+++ b/arch/arm/mach-bcm2709/include/mach/entry-macro.S -@@ -0,0 +1,123 @@ -+/* -+ * arch/arm/mach-bcm2708/include/mach/entry-macro.S -+ * -+ * Low-level IRQ helper macros for BCM2708 platforms -+ * -+ * Copyright (C) 2010 Broadcom -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+#include <mach/hardware.h> -+#include <mach/irqs.h> -+ -+ .macro disable_fiq -+ .endm -+ -+ .macro get_irqnr_preamble, base, tmp -+ ldr \base, =IO_ADDRESS(ARMCTRL_IC_BASE) -+ .endm -+ -+ .macro arch_ret_to_user, tmp1, tmp2 -+ .endm -+ -+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp -+ /* get core number */ -+ mrc p15, 0, \tmp, c0, c0, 5 -+ ubfx \tmp, \tmp, #0, #2 -+ -+ /* get core's local interrupt controller */ -+ ldr \irqstat, = __io_address(ARM_LOCAL_IRQ_PENDING0) @ local interrupt source -+ add \irqstat, \irqstat, \tmp, lsl #2 -+ ldr \tmp, [\irqstat] -+ /* ignore gpu interrupt */ -+ bic \tmp, #0x100 -+ /* ignore mailbox interrupts */ -+ bics \tmp, #0xf0 -+ beq 1005f -+ -+ @ For non-zero x, LSB(x) = 31 - CLZ(x^(x-1)) -+ @ N.B. CLZ is an ARM5 instruction. -+ mov \irqnr, #(ARM_IRQ_LOCAL_BASE + 31) -+ sub \irqstat, \tmp, #1 -+ eor \irqstat, \irqstat, \tmp -+ clz \tmp, \irqstat -+ sub \irqnr, \tmp -+ b 1020f -+1005: -+ /* get core number */ -+ mrc p15, 0, \tmp, c0, c0, 5 -+ ubfx \tmp, \tmp, #0, #2 -+ -+ cmp \tmp, #1 -+ beq 1020f -+ cmp \tmp, #2 -+ beq 1020f -+ cmp \tmp, #3 -+ beq 1020f -+ -+ /* get masked status */ -+ ldr \irqstat, [\base, #(ARM_IRQ_PEND0 - ARMCTRL_IC_BASE)] -+ mov \irqnr, #(ARM_IRQ0_BASE + 31) -+ and \tmp, \irqstat, #0x300 @ save bits 8 and 9 -+ /* clear bits 8 and 9, and test */ -+ bics \irqstat, \irqstat, #0x300 -+ bne 1010f -+ -+ tst \tmp, #0x100 -+ ldrne \irqstat, [\base, #(ARM_IRQ_PEND1 - ARMCTRL_IC_BASE)] -+ movne \irqnr, #(ARM_IRQ1_BASE + 31) -+ @ Mask out the interrupts also present in PEND0 - see SW-5809 -+ bicne \irqstat, #((1<<7) | (1<<9) | (1<<10)) -+ bicne \irqstat, #((1<<18) | (1<<19)) -+ bne 1010f -+ -+ tst \tmp, #0x200 -+ ldrne \irqstat, [\base, #(ARM_IRQ_PEND2 - ARMCTRL_IC_BASE)] -+ movne \irqnr, #(ARM_IRQ2_BASE + 31) -+ @ Mask out the interrupts also present in PEND0 - see SW-5809 -+ bicne \irqstat, #((1<<21) | (1<<22) | (1<<23) | (1<<24) | (1<<25)) -+ bicne \irqstat, #((1<<30)) -+ beq 1020f -+ -+1010: -+ @ For non-zero x, LSB(x) = 31 - CLZ(x^(x-1)) -+ @ N.B. CLZ is an ARM5 instruction. -+ sub \tmp, \irqstat, #1 -+ eor \irqstat, \irqstat, \tmp -+ clz \tmp, \irqstat -+ sub \irqnr, \tmp -+ -+1020: @ EQ will be set if no irqs pending -+ -+ .endm -+ -+ .macro test_for_ipi, irqnr, irqstat, base, tmp -+ /* get core number */ -+ mrc p15, 0, \tmp, c0, c0, 5 -+ ubfx \tmp, \tmp, #0, #2 -+ /* get core's mailbox interrupt control */ -+ ldr \irqstat, = __io_address(ARM_LOCAL_MAILBOX0_CLR0) @ mbox_clr -+ add \irqstat, \irqstat, \tmp, lsl #4 -+ ldr \tmp, [\irqstat] -+ cmp \tmp, #0 -+ beq 1030f -+ clz \tmp, \tmp -+ rsb \irqnr, \tmp, #31 -+ mov \tmp, #1 -+ lsl \tmp, \irqnr -+ str \tmp, [\irqstat] @ clear interrupt source -+ dsb -+1030: @ EQ will be set if no irqs pending -+ .endm ---- /dev/null -+++ b/arch/arm/mach-bcm2709/include/mach/frc.h -@@ -0,0 +1,38 @@ -+/* -+ * arch/arm/mach-bcm2708/include/mach/timex.h -+ * -+ * BCM2708 free running counter (timer) -+ * -+ * Copyright (C) 2010 Broadcom -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+ -+#ifndef _MACH_FRC_H -+#define _MACH_FRC_H -+ -+#define FRC_TICK_RATE (1000000) -+ -+/*! Free running counter incrementing at the CLOCK_TICK_RATE -+ (slightly faster than frc_clock_ticks63() -+ */ -+extern unsigned long frc_clock_ticks32(void); -+ -+/*! Free running counter incrementing at the CLOCK_TICK_RATE -+ * Note - top bit should be ignored (see cnt32_to_63) -+ */ -+extern unsigned long long frc_clock_ticks63(void); -+ -+#endif ---- /dev/null -+++ b/arch/arm/mach-bcm2709/include/mach/gpio.h -@@ -0,0 +1,17 @@ -+/* -+ * arch/arm/mach-bcm2708/include/mach/gpio.h -+ * -+ * This file is licensed under the terms of the GNU General Public -+ * License version 2. This program is licensed "as is" without any -+ * warranty of any kind, whether express or implied. -+ */ -+ -+#ifndef __ASM_ARCH_GPIO_H -+#define __ASM_ARCH_GPIO_H -+ -+#define BCM2708_NR_GPIOS 54 // number of gpio lines -+ -+#define gpio_to_irq(x) ((x) + GPIO_IRQ_START) -+#define irq_to_gpio(x) ((x) - GPIO_IRQ_START) -+ -+#endif ---- /dev/null -+++ b/arch/arm/mach-bcm2709/include/mach/hardware.h -@@ -0,0 +1,28 @@ -+/* -+ * arch/arm/mach-bcm2708/include/mach/hardware.h -+ * -+ * This file contains the hardware definitions of the BCM2708 devices. -+ * -+ * Copyright (C) 2010 Broadcom -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+#ifndef __ASM_ARCH_HARDWARE_H -+#define __ASM_ARCH_HARDWARE_H -+ -+#include <asm/sizes.h> -+#include <mach/platform.h> -+ -+#endif ---- /dev/null -+++ b/arch/arm/mach-bcm2709/include/mach/io.h -@@ -0,0 +1,27 @@ -+/* -+ * arch/arm/mach-bcm2708/include/mach/io.h -+ * -+ * Copyright (C) 2003 ARM Limited -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+#ifndef __ASM_ARM_ARCH_IO_H -+#define __ASM_ARM_ARCH_IO_H -+ -+#define IO_SPACE_LIMIT 0xffffffff -+ -+#define __io(a) __typesafe_io(a) -+ -+#endif ---- /dev/null -+++ b/arch/arm/mach-bcm2709/include/mach/irqs.h -@@ -0,0 +1,225 @@ -+/* -+ * arch/arm/mach-bcm2708/include/mach/irqs.h -+ * -+ * Copyright (C) 2010 Broadcom -+ * Copyright (C) 2003 ARM Limited -+ * Copyright (C) 2000 Deep Blue Solutions Ltd. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+ -+#ifndef _BCM2708_IRQS_H_ -+#define _BCM2708_IRQS_H_ -+ -+#include <mach/platform.h> -+ -+/* -+ * IRQ interrupts definitions are the same as the INT definitions -+ * held within platform.h -+ */ -+#define IRQ_ARMCTRL_START 0 -+#define IRQ_TIMER0 (IRQ_ARMCTRL_START + INTERRUPT_TIMER0) -+#define IRQ_TIMER1 (IRQ_ARMCTRL_START + INTERRUPT_TIMER1) -+#define IRQ_TIMER2 (IRQ_ARMCTRL_START + INTERRUPT_TIMER2) -+#define IRQ_TIMER3 (IRQ_ARMCTRL_START + INTERRUPT_TIMER3) -+#define IRQ_CODEC0 (IRQ_ARMCTRL_START + INTERRUPT_CODEC0) -+#define IRQ_CODEC1 (IRQ_ARMCTRL_START + INTERRUPT_CODEC1) -+#define IRQ_CODEC2 (IRQ_ARMCTRL_START + INTERRUPT_CODEC2) -+#define IRQ_JPEG (IRQ_ARMCTRL_START + INTERRUPT_JPEG) -+#define IRQ_ISP (IRQ_ARMCTRL_START + INTERRUPT_ISP) -+#define IRQ_USB (IRQ_ARMCTRL_START + INTERRUPT_USB) -+#define IRQ_3D (IRQ_ARMCTRL_START + INTERRUPT_3D) -+#define IRQ_TRANSPOSER (IRQ_ARMCTRL_START + INTERRUPT_TRANSPOSER) -+#define IRQ_MULTICORESYNC0 (IRQ_ARMCTRL_START + INTERRUPT_MULTICORESYNC0) -+#define IRQ_MULTICORESYNC1 (IRQ_ARMCTRL_START + INTERRUPT_MULTICORESYNC1) -+#define IRQ_MULTICORESYNC2 (IRQ_ARMCTRL_START + INTERRUPT_MULTICORESYNC2) -+#define IRQ_MULTICORESYNC3 (IRQ_ARMCTRL_START + INTERRUPT_MULTICORESYNC3) -+#define IRQ_DMA0 (IRQ_ARMCTRL_START + INTERRUPT_DMA0) -+#define IRQ_DMA1 (IRQ_ARMCTRL_START + INTERRUPT_DMA1) -+#define IRQ_DMA2 (IRQ_ARMCTRL_START + INTERRUPT_DMA2) -+#define IRQ_DMA3 (IRQ_ARMCTRL_START + INTERRUPT_DMA3) -+#define IRQ_DMA4 (IRQ_ARMCTRL_START + INTERRUPT_DMA4) -+#define IRQ_DMA5 (IRQ_ARMCTRL_START + INTERRUPT_DMA5) -+#define IRQ_DMA6 (IRQ_ARMCTRL_START + INTERRUPT_DMA6) -+#define IRQ_DMA7 (IRQ_ARMCTRL_START + INTERRUPT_DMA7) -+#define IRQ_DMA8 (IRQ_ARMCTRL_START + INTERRUPT_DMA8) -+#define IRQ_DMA9 (IRQ_ARMCTRL_START + INTERRUPT_DMA9) -+#define IRQ_DMA10 (IRQ_ARMCTRL_START + INTERRUPT_DMA10) -+#define IRQ_DMA11 (IRQ_ARMCTRL_START + INTERRUPT_DMA11) -+#define IRQ_DMA12 (IRQ_ARMCTRL_START + INTERRUPT_DMA12) -+#define IRQ_AUX (IRQ_ARMCTRL_START + INTERRUPT_AUX) -+#define IRQ_ARM (IRQ_ARMCTRL_START + INTERRUPT_ARM) -+#define IRQ_VPUDMA (IRQ_ARMCTRL_START + INTERRUPT_VPUDMA) -+#define IRQ_HOSTPORT (IRQ_ARMCTRL_START + INTERRUPT_HOSTPORT) -+#define IRQ_VIDEOSCALER (IRQ_ARMCTRL_START + INTERRUPT_VIDEOSCALER) -+#define IRQ_CCP2TX (IRQ_ARMCTRL_START + INTERRUPT_CCP2TX) -+#define IRQ_SDC (IRQ_ARMCTRL_START + INTERRUPT_SDC) -+#define IRQ_DSI0 (IRQ_ARMCTRL_START + INTERRUPT_DSI0) -+#define IRQ_AVE (IRQ_ARMCTRL_START + INTERRUPT_AVE) -+#define IRQ_CAM0 (IRQ_ARMCTRL_START + INTERRUPT_CAM0) -+#define IRQ_CAM1 (IRQ_ARMCTRL_START + INTERRUPT_CAM1) -+#define IRQ_HDMI0 (IRQ_ARMCTRL_START + INTERRUPT_HDMI0) -+#define IRQ_HDMI1 (IRQ_ARMCTRL_START + INTERRUPT_HDMI1) -+#define IRQ_PIXELVALVE1 (IRQ_ARMCTRL_START + INTERRUPT_PIXELVALVE1) -+#define IRQ_I2CSPISLV (IRQ_ARMCTRL_START + INTERRUPT_I2CSPISLV) -+#define IRQ_DSI1 (IRQ_ARMCTRL_START + INTERRUPT_DSI1) -+#define IRQ_PWA0 (IRQ_ARMCTRL_START + INTERRUPT_PWA0) -+#define IRQ_PWA1 (IRQ_ARMCTRL_START + INTERRUPT_PWA1) -+#define IRQ_CPR (IRQ_ARMCTRL_START + INTERRUPT_CPR) -+#define IRQ_SMI (IRQ_ARMCTRL_START + INTERRUPT_SMI) -+#define IRQ_GPIO0 (IRQ_ARMCTRL_START + INTERRUPT_GPIO0) -+#define IRQ_GPIO1 (IRQ_ARMCTRL_START + INTERRUPT_GPIO1) -+#define IRQ_GPIO2 (IRQ_ARMCTRL_START + INTERRUPT_GPIO2) -+#define IRQ_GPIO3 (IRQ_ARMCTRL_START + INTERRUPT_GPIO3) -+#define IRQ_I2C (IRQ_ARMCTRL_START + INTERRUPT_I2C) -+#define IRQ_SPI (IRQ_ARMCTRL_START + INTERRUPT_SPI) -+#define IRQ_I2SPCM (IRQ_ARMCTRL_START + INTERRUPT_I2SPCM) -+#define IRQ_SDIO (IRQ_ARMCTRL_START + INTERRUPT_SDIO) -+#define IRQ_UART (IRQ_ARMCTRL_START + INTERRUPT_UART) -+#define IRQ_SLIMBUS (IRQ_ARMCTRL_START + INTERRUPT_SLIMBUS) -+#define IRQ_VEC (IRQ_ARMCTRL_START + INTERRUPT_VEC) -+#define IRQ_CPG (IRQ_ARMCTRL_START + INTERRUPT_CPG) -+#define IRQ_RNG (IRQ_ARMCTRL_START + INTERRUPT_RNG) -+#define IRQ_ARASANSDIO (IRQ_ARMCTRL_START + INTERRUPT_ARASANSDIO) -+#define IRQ_AVSPMON (IRQ_ARMCTRL_START + INTERRUPT_AVSPMON) -+ -+#define IRQ_ARM_TIMER (IRQ_ARMCTRL_START + INTERRUPT_ARM_TIMER) -+#define IRQ_ARM_MAILBOX (IRQ_ARMCTRL_START + INTERRUPT_ARM_MAILBOX) -+#define IRQ_ARM_DOORBELL_0 (IRQ_ARMCTRL_START + INTERRUPT_ARM_DOORBELL_0) -+#define IRQ_ARM_DOORBELL_1 (IRQ_ARMCTRL_START + INTERRUPT_ARM_DOORBELL_1) -+#define IRQ_VPU0_HALTED (IRQ_ARMCTRL_START + INTERRUPT_VPU0_HALTED) -+#define IRQ_VPU1_HALTED (IRQ_ARMCTRL_START + INTERRUPT_VPU1_HALTED) -+#define IRQ_ILLEGAL_TYPE0 (IRQ_ARMCTRL_START + INTERRUPT_ILLEGAL_TYPE0) -+#define IRQ_ILLEGAL_TYPE1 (IRQ_ARMCTRL_START + INTERRUPT_ILLEGAL_TYPE1) -+#define IRQ_PENDING1 (IRQ_ARMCTRL_START + INTERRUPT_PENDING1) -+#define IRQ_PENDING2 (IRQ_ARMCTRL_START + INTERRUPT_PENDING2) -+ -+#define IRQ_ARM_LOCAL_CNTPSIRQ (IRQ_ARMCTRL_START + INTERRUPT_ARM_LOCAL_CNTPSIRQ) -+#define IRQ_ARM_LOCAL_CNTPNSIRQ (IRQ_ARMCTRL_START + INTERRUPT_ARM_LOCAL_CNTPNSIRQ) -+#define IRQ_ARM_LOCAL_CNTHPIRQ (IRQ_ARMCTRL_START + INTERRUPT_ARM_LOCAL_CNTHPIRQ) -+#define IRQ_ARM_LOCAL_CNTVIRQ (IRQ_ARMCTRL_START + INTERRUPT_ARM_LOCAL_CNTVIRQ) -+#define IRQ_ARM_LOCAL_MAILBOX0 (IRQ_ARMCTRL_START + INTERRUPT_ARM_LOCAL_MAILBOX0) -+#define IRQ_ARM_LOCAL_MAILBOX1 (IRQ_ARMCTRL_START + INTERRUPT_ARM_LOCAL_MAILBOX1) -+#define IRQ_ARM_LOCAL_MAILBOX2 (IRQ_ARMCTRL_START + INTERRUPT_ARM_LOCAL_MAILBOX2) -+#define IRQ_ARM_LOCAL_MAILBOX3 (IRQ_ARMCTRL_START + INTERRUPT_ARM_LOCAL_MAILBOX3) -+#define IRQ_ARM_LOCAL_GPU_FAST (IRQ_ARMCTRL_START + INTERRUPT_ARM_LOCAL_GPU_FAST) -+#define IRQ_ARM_LOCAL_PMU_FAST (IRQ_ARMCTRL_START + INTERRUPT_ARM_LOCAL_PMU_FAST) -+#define IRQ_ARM_LOCAL_ZERO (IRQ_ARMCTRL_START + INTERRUPT_ARM_LOCAL_ZERO) -+#define IRQ_ARM_LOCAL_TIMER (IRQ_ARMCTRL_START + INTERRUPT_ARM_LOCAL_TIMER) -+ -+#define FIQ_START HARD_IRQS -+ -+/* -+ * FIQ interrupts definitions are the same as the INT definitions. -+ */ -+#define FIQ_TIMER0 (FIQ_START+INTERRUPT_TIMER0) -+#define FIQ_TIMER1 (FIQ_START+INTERRUPT_TIMER1) -+#define FIQ_TIMER2 (FIQ_START+INTERRUPT_TIMER2) -+#define FIQ_TIMER3 (FIQ_START+INTERRUPT_TIMER3) -+#define FIQ_CODEC0 (FIQ_START+INTERRUPT_CODEC0) -+#define FIQ_CODEC1 (FIQ_START+INTERRUPT_CODEC1) -+#define FIQ_CODEC2 (FIQ_START+INTERRUPT_CODEC2) -+#define FIQ_JPEG (FIQ_START+INTERRUPT_JPEG) -+#define FIQ_ISP (FIQ_START+INTERRUPT_ISP) -+#define FIQ_USB (FIQ_START+INTERRUPT_USB) -+#define FIQ_3D (FIQ_START+INTERRUPT_3D) -+#define FIQ_TRANSPOSER (FIQ_START+INTERRUPT_TRANSPOSER) -+#define FIQ_MULTICORESYNC0 (FIQ_START+INTERRUPT_MULTICORESYNC0) -+#define FIQ_MULTICORESYNC1 (FIQ_START+INTERRUPT_MULTICORESYNC1) -+#define FIQ_MULTICORESYNC2 (FIQ_START+INTERRUPT_MULTICORESYNC2) -+#define FIQ_MULTICORESYNC3 (FIQ_START+INTERRUPT_MULTICORESYNC3) -+#define FIQ_DMA0 (FIQ_START+INTERRUPT_DMA0) -+#define FIQ_DMA1 (FIQ_START+INTERRUPT_DMA1) -+#define FIQ_DMA2 (FIQ_START+INTERRUPT_DMA2) -+#define FIQ_DMA3 (FIQ_START+INTERRUPT_DMA3) -+#define FIQ_DMA4 (FIQ_START+INTERRUPT_DMA4) -+#define FIQ_DMA5 (FIQ_START+INTERRUPT_DMA5) -+#define FIQ_DMA6 (FIQ_START+INTERRUPT_DMA6) -+#define FIQ_DMA7 (FIQ_START+INTERRUPT_DMA7) -+#define FIQ_DMA8 (FIQ_START+INTERRUPT_DMA8) -+#define FIQ_DMA9 (FIQ_START+INTERRUPT_DMA9) -+#define FIQ_DMA10 (FIQ_START+INTERRUPT_DMA10) -+#define FIQ_DMA11 (FIQ_START+INTERRUPT_DMA11) -+#define FIQ_DMA12 (FIQ_START+INTERRUPT_DMA12) -+#define FIQ_AUX (FIQ_START+INTERRUPT_AUX) -+#define FIQ_ARM (FIQ_START+INTERRUPT_ARM) -+#define FIQ_VPUDMA (FIQ_START+INTERRUPT_VPUDMA) -+#define FIQ_HOSTPORT (FIQ_START+INTERRUPT_HOSTPORT) -+#define FIQ_VIDEOSCALER (FIQ_START+INTERRUPT_VIDEOSCALER) -+#define FIQ_CCP2TX (FIQ_START+INTERRUPT_CCP2TX) -+#define FIQ_SDC (FIQ_START+INTERRUPT_SDC) -+#define FIQ_DSI0 (FIQ_START+INTERRUPT_DSI0) -+#define FIQ_AVE (FIQ_START+INTERRUPT_AVE) -+#define FIQ_CAM0 (FIQ_START+INTERRUPT_CAM0) -+#define FIQ_CAM1 (FIQ_START+INTERRUPT_CAM1) -+#define FIQ_HDMI0 (FIQ_START+INTERRUPT_HDMI0) -+#define FIQ_HDMI1 (FIQ_START+INTERRUPT_HDMI1) -+#define FIQ_PIXELVALVE1 (FIQ_START+INTERRUPT_PIXELVALVE1) -+#define FIQ_I2CSPISLV (FIQ_START+INTERRUPT_I2CSPISLV) -+#define FIQ_DSI1 (FIQ_START+INTERRUPT_DSI1) -+#define FIQ_PWA0 (FIQ_START+INTERRUPT_PWA0) -+#define FIQ_PWA1 (FIQ_START+INTERRUPT_PWA1) -+#define FIQ_CPR (FIQ_START+INTERRUPT_CPR) -+#define FIQ_SMI (FIQ_START+INTERRUPT_SMI) -+#define FIQ_GPIO0 (FIQ_START+INTERRUPT_GPIO0) -+#define FIQ_GPIO1 (FIQ_START+INTERRUPT_GPIO1) -+#define FIQ_GPIO2 (FIQ_START+INTERRUPT_GPIO2) -+#define FIQ_GPIO3 (FIQ_START+INTERRUPT_GPIO3) -+#define FIQ_I2C (FIQ_START+INTERRUPT_I2C) -+#define FIQ_SPI (FIQ_START+INTERRUPT_SPI) -+#define FIQ_I2SPCM (FIQ_START+INTERRUPT_I2SPCM) -+#define FIQ_SDIO (FIQ_START+INTERRUPT_SDIO) -+#define FIQ_UART (FIQ_START+INTERRUPT_UART) -+#define FIQ_SLIMBUS (FIQ_START+INTERRUPT_SLIMBUS) -+#define FIQ_VEC (FIQ_START+INTERRUPT_VEC) -+#define FIQ_CPG (FIQ_START+INTERRUPT_CPG) -+#define FIQ_RNG (FIQ_START+INTERRUPT_RNG) -+#define FIQ_ARASANSDIO (FIQ_START+INTERRUPT_ARASANSDIO) -+#define FIQ_AVSPMON (FIQ_START+INTERRUPT_AVSPMON) -+ -+#define FIQ_ARM_TIMER (FIQ_START+INTERRUPT_ARM_TIMER) -+#define FIQ_ARM_MAILBOX (FIQ_START+INTERRUPT_ARM_MAILBOX) -+#define FIQ_ARM_DOORBELL_0 (FIQ_START+INTERRUPT_ARM_DOORBELL_0) -+#define FIQ_ARM_DOORBELL_1 (FIQ_START+INTERRUPT_ARM_DOORBELL_1) -+#define FIQ_VPU0_HALTED (FIQ_START+INTERRUPT_VPU0_HALTED) -+#define FIQ_VPU1_HALTED (FIQ_START+INTERRUPT_VPU1_HALTED) -+#define FIQ_ILLEGAL_TYPE0 (FIQ_START+INTERRUPT_ILLEGAL_TYPE0) -+#define FIQ_ILLEGAL_TYPE1 (FIQ_START+INTERRUPT_ILLEGAL_TYPE1) -+#define FIQ_PENDING1 (FIQ_START+INTERRUPT_PENDING1) -+#define FIQ_PENDING2 (FIQ_START+INTERRUPT_PENDING2) -+ -+#define FIQ_ARM_LOCAL_CNTPSIRQ (FIQ_ARMCTRL_START + INTERRUPT_ARM_LOCAL_CNTPSIRQ) -+#define FIQ_ARM_LOCAL_CNTPNSIRQ (FIQ_ARMCTRL_START + INTERRUPT_ARM_LOCAL_CNTPNSIRQ) -+#define FIQ_ARM_LOCAL_CNTHPIRQ (FIQ_ARMCTRL_START + INTERRUPT_ARM_LOCAL_CNTHPIRQ) -+#define FIQ_ARM_LOCAL_CNTVIRQ (FIQ_ARMCTRL_START + INTERRUPT_ARM_LOCAL_CNTVIRQ) -+#define FIQ_ARM_LOCAL_MAILBOX0 (FIQ_ARMCTRL_START + INTERRUPT_ARM_LOCAL_MAILBOX0) -+#define FIQ_ARM_LOCAL_MAILBOX1 (FIQ_ARMCTRL_START + INTERRUPT_ARM_LOCAL_MAILBOX1) -+#define FIQ_ARM_LOCAL_MAILBOX2 (FIQ_ARMCTRL_START + INTERRUPT_ARM_LOCAL_MAILBOX2) -+#define FIQ_ARM_LOCAL_MAILBOX3 (FIQ_ARMCTRL_START + INTERRUPT_ARM_LOCAL_MAILBOX3) -+#define FIQ_ARM_LOCAL_GPU_FAST (FIQ_ARMCTRL_START + INTERRUPT_ARM_LOCAL_GPU_FAST) -+#define FIQ_ARM_LOCAL_PMU_FAST (FIQ_ARMCTRL_START + INTERRUPT_ARM_LOCAL_PMU_FAST) -+#define FIQ_ARM_LOCAL_ZERO (FIQ_ARMCTRL_START + INTERRUPT_ARM_LOCAL_ZERO) -+#define FIQ_ARM_LOCAL_TIMER (FIQ_ARMCTRL_START + INTERRUPT_ARM_LOCAL_TIMER) -+ -+#define HARD_IRQS (128) -+#define FIQ_IRQS (128) -+#define GPIO_IRQ_START (HARD_IRQS + FIQ_IRQS) -+#define GPIO_IRQS (32*5) -+#define SPARE_ALLOC_IRQS 64 -+#define BCM2708_ALLOC_IRQS (HARD_IRQS+FIQ_IRQS+GPIO_IRQS+SPARE_ALLOC_IRQS) -+#define FREE_IRQS 128 -+#define NR_IRQS (BCM2708_ALLOC_IRQS+FREE_IRQS) -+ -+#endif /* _BCM2708_IRQS_H_ */ ---- /dev/null -+++ b/arch/arm/mach-bcm2709/include/mach/memory.h -@@ -0,0 +1,57 @@ -+/* -+ * arch/arm/mach-bcm2708/include/mach/memory.h -+ * -+ * Copyright (C) 2010 Broadcom -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+#ifndef __ASM_ARCH_MEMORY_H -+#define __ASM_ARCH_MEMORY_H -+ -+/* Memory overview: -+ -+ [ARMcore] <--virtual addr--> -+ [ARMmmu] <--physical addr--> -+ [GERTmap] <--bus add--> -+ [VCperiph] -+ -+*/ -+ -+/* -+ * Physical DRAM offset. -+ */ -+#define BCM_PLAT_PHYS_OFFSET UL(0x00000000) -+#define VC_ARMMEM_OFFSET UL(0x00000000) /* offset in VC of ARM memory */ -+ -+#ifdef CONFIG_BCM2708_NOL2CACHE -+ #define _REAL_BUS_OFFSET UL(0xC0000000) /* don't use L1 or L2 caches */ -+#else -+ #define _REAL_BUS_OFFSET UL(0x40000000) /* use L2 cache */ -+#endif -+ -+/* We're using the memory at 64M in the VideoCore for Linux - this adjustment -+ * will provide the offset into this area as well as setting the bits that -+ * stop the L1 and L2 cache from being used -+ * -+ * WARNING: this only works because the ARM is given memory at a fixed location -+ * (ARMMEM_OFFSET) -+ */ -+#define BUS_OFFSET (VC_ARMMEM_OFFSET + _REAL_BUS_OFFSET) -+#define __virt_to_bus(x) ((x) + (BUS_OFFSET - PAGE_OFFSET)) -+#define __bus_to_virt(x) ((x) - (BUS_OFFSET - PAGE_OFFSET)) -+#define __pfn_to_bus(x) (__pfn_to_phys(x) + (BUS_OFFSET - BCM_PLAT_PHYS_OFFSET)) -+#define __bus_to_pfn(x) __phys_to_pfn((x) - (BUS_OFFSET - BCM_PLAT_PHYS_OFFSET)) -+ -+#endif ---- /dev/null -+++ b/arch/arm/mach-bcm2709/include/mach/platform.h -@@ -0,0 +1,225 @@ -+/* -+ * arch/arm/mach-bcm2708/include/mach/platform.h -+ * -+ * Copyright (C) 2010 Broadcom -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+ -+#ifndef _BCM2708_PLATFORM_H -+#define _BCM2708_PLATFORM_H -+ -+ -+/* macros to get at IO space when running virtually */ -+#define IO_ADDRESS(x) (((x) & 0x00ffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000) -+ -+#define __io_address(n) IOMEM(IO_ADDRESS(n)) -+ -+ -+/* -+ * SDRAM -+ */ -+#define BCM2708_SDRAM_BASE 0x00000000 -+ -+/* -+ * Logic expansion modules -+ * -+ */ -+ -+ -+/* ------------------------------------------------------------------------ -+ * BCM2708 ARMCTRL Registers -+ * ------------------------------------------------------------------------ -+ */ -+ -+#define HW_REGISTER_RW(addr) (addr) -+#define HW_REGISTER_RO(addr) (addr) -+ -+#include "arm_control.h" -+#undef ARM_BASE -+ -+/* -+ * Definitions and addresses for the ARM CONTROL logic -+ * This file is manually generated. -+ */ -+ -+#define BCM2708_PERI_BASE 0x3F000000 -+#define IC0_BASE (BCM2708_PERI_BASE + 0x2000) -+#define ST_BASE (BCM2708_PERI_BASE + 0x3000) /* System Timer */ -+#define MPHI_BASE (BCM2708_PERI_BASE + 0x6000) /* Message -based Parallel Host Interface */ -+#define DMA_BASE (BCM2708_PERI_BASE + 0x7000) /* DMA controller */ -+#define ARM_BASE (BCM2708_PERI_BASE + 0xB000) /* BCM2708 ARM control block */ -+#define PM_BASE (BCM2708_PERI_BASE + 0x100000) /* Power Management, Reset controller and Watchdog registers */ -+#define PCM_CLOCK_BASE (BCM2708_PERI_BASE + 0x101098) /* PCM Clock */ -+#define RNG_BASE (BCM2708_PERI_BASE + 0x104000) /* Hardware RNG */ -+#define GPIO_BASE (BCM2708_PERI_BASE + 0x200000) /* GPIO */ -+#define UART0_BASE (BCM2708_PERI_BASE + 0x201000) /* Uart 0 */ -+#define MMCI0_BASE (BCM2708_PERI_BASE + 0x202000) /* MMC interface */ -+#define I2S_BASE (BCM2708_PERI_BASE + 0x203000) /* I2S */ -+#define SPI0_BASE (BCM2708_PERI_BASE + 0x204000) /* SPI0 */ -+#define BSC0_BASE (BCM2708_PERI_BASE + 0x205000) /* BSC0 I2C/TWI */ -+#define UART1_BASE (BCM2708_PERI_BASE + 0x215000) /* Uart 1 */ -+#define EMMC_BASE (BCM2708_PERI_BASE + 0x300000) /* eMMC interface */ -+#define SMI_BASE (BCM2708_PERI_BASE + 0x600000) /* SMI */ -+#define BSC1_BASE (BCM2708_PERI_BASE + 0x804000) /* BSC1 I2C/TWI */ -+#define USB_BASE (BCM2708_PERI_BASE + 0x980000) /* DTC_OTG USB controller */ -+#define MCORE_BASE (BCM2708_PERI_BASE + 0x0000) /* Fake frame buffer device (actually the multicore sync block*/ -+ -+#define ARMCTRL_BASE (ARM_BASE + 0x000) -+#define ARMCTRL_IC_BASE (ARM_BASE + 0x200) /* ARM interrupt controller */ -+#define ARMCTRL_TIMER0_1_BASE (ARM_BASE + 0x400) /* Timer 0 and 1 */ -+#define ARMCTRL_0_SBM_BASE (ARM_BASE + 0x800) /* User 0 (ARM)'s Semaphores Doorbells and Mailboxes */ -+ -+ -+/* -+ * Interrupt assignments -+ */ -+ -+#define ARM_IRQ1_BASE 0 -+#define INTERRUPT_TIMER0 (ARM_IRQ1_BASE + 0) -+#define INTERRUPT_TIMER1 (ARM_IRQ1_BASE + 1) -+#define INTERRUPT_TIMER2 (ARM_IRQ1_BASE + 2) -+#define INTERRUPT_TIMER3 (ARM_IRQ1_BASE + 3) -+#define INTERRUPT_CODEC0 (ARM_IRQ1_BASE + 4) -+#define INTERRUPT_CODEC1 (ARM_IRQ1_BASE + 5) -+#define INTERRUPT_CODEC2 (ARM_IRQ1_BASE + 6) -+#define INTERRUPT_VC_JPEG (ARM_IRQ1_BASE + 7) -+#define INTERRUPT_ISP (ARM_IRQ1_BASE + 8) -+#define INTERRUPT_VC_USB (ARM_IRQ1_BASE + 9) -+#define INTERRUPT_VC_3D (ARM_IRQ1_BASE + 10) -+#define INTERRUPT_TRANSPOSER (ARM_IRQ1_BASE + 11) -+#define INTERRUPT_MULTICORESYNC0 (ARM_IRQ1_BASE + 12) -+#define INTERRUPT_MULTICORESYNC1 (ARM_IRQ1_BASE + 13) -+#define INTERRUPT_MULTICORESYNC2 (ARM_IRQ1_BASE + 14) -+#define INTERRUPT_MULTICORESYNC3 (ARM_IRQ1_BASE + 15) -+#define INTERRUPT_DMA0 (ARM_IRQ1_BASE + 16) -+#define INTERRUPT_DMA1 (ARM_IRQ1_BASE + 17) -+#define INTERRUPT_VC_DMA2 (ARM_IRQ1_BASE + 18) -+#define INTERRUPT_VC_DMA3 (ARM_IRQ1_BASE + 19) -+#define INTERRUPT_DMA4 (ARM_IRQ1_BASE + 20) -+#define INTERRUPT_DMA5 (ARM_IRQ1_BASE + 21) -+#define INTERRUPT_DMA6 (ARM_IRQ1_BASE + 22) -+#define INTERRUPT_DMA7 (ARM_IRQ1_BASE + 23) -+#define INTERRUPT_DMA8 (ARM_IRQ1_BASE + 24) -+#define INTERRUPT_DMA9 (ARM_IRQ1_BASE + 25) -+#define INTERRUPT_DMA10 (ARM_IRQ1_BASE + 26) -+#define INTERRUPT_DMA11 (ARM_IRQ1_BASE + 27) -+#define INTERRUPT_DMA12 (ARM_IRQ1_BASE + 28) -+#define INTERRUPT_AUX (ARM_IRQ1_BASE + 29) -+#define INTERRUPT_ARM (ARM_IRQ1_BASE + 30) -+#define INTERRUPT_VPUDMA (ARM_IRQ1_BASE + 31) -+ -+#define ARM_IRQ2_BASE 32 -+#define INTERRUPT_HOSTPORT (ARM_IRQ2_BASE + 0) -+#define INTERRUPT_VIDEOSCALER (ARM_IRQ2_BASE + 1) -+#define INTERRUPT_CCP2TX (ARM_IRQ2_BASE + 2) -+#define INTERRUPT_SDC (ARM_IRQ2_BASE + 3) -+#define INTERRUPT_DSI0 (ARM_IRQ2_BASE + 4) -+#define INTERRUPT_AVE (ARM_IRQ2_BASE + 5) -+#define INTERRUPT_CAM0 (ARM_IRQ2_BASE + 6) -+#define INTERRUPT_CAM1 (ARM_IRQ2_BASE + 7) -+#define INTERRUPT_HDMI0 (ARM_IRQ2_BASE + 8) -+#define INTERRUPT_HDMI1 (ARM_IRQ2_BASE + 9) -+#define INTERRUPT_PIXELVALVE1 (ARM_IRQ2_BASE + 10) -+#define INTERRUPT_I2CSPISLV (ARM_IRQ2_BASE + 11) -+#define INTERRUPT_DSI1 (ARM_IRQ2_BASE + 12) -+#define INTERRUPT_PWA0 (ARM_IRQ2_BASE + 13) -+#define INTERRUPT_PWA1 (ARM_IRQ2_BASE + 14) -+#define INTERRUPT_CPR (ARM_IRQ2_BASE + 15) -+#define INTERRUPT_SMI (ARM_IRQ2_BASE + 16) -+#define INTERRUPT_GPIO0 (ARM_IRQ2_BASE + 17) -+#define INTERRUPT_GPIO1 (ARM_IRQ2_BASE + 18) -+#define INTERRUPT_GPIO2 (ARM_IRQ2_BASE + 19) -+#define INTERRUPT_GPIO3 (ARM_IRQ2_BASE + 20) -+#define INTERRUPT_VC_I2C (ARM_IRQ2_BASE + 21) -+#define INTERRUPT_VC_SPI (ARM_IRQ2_BASE + 22) -+#define INTERRUPT_VC_I2SPCM (ARM_IRQ2_BASE + 23) -+#define INTERRUPT_VC_SDIO (ARM_IRQ2_BASE + 24) -+#define INTERRUPT_VC_UART (ARM_IRQ2_BASE + 25) -+#define INTERRUPT_SLIMBUS (ARM_IRQ2_BASE + 26) -+#define INTERRUPT_VEC (ARM_IRQ2_BASE + 27) -+#define INTERRUPT_CPG (ARM_IRQ2_BASE + 28) -+#define INTERRUPT_RNG (ARM_IRQ2_BASE + 29) -+#define INTERRUPT_VC_ARASANSDIO (ARM_IRQ2_BASE + 30) -+#define INTERRUPT_AVSPMON (ARM_IRQ2_BASE + 31) -+ -+#define ARM_IRQ0_BASE 64 -+#define INTERRUPT_ARM_TIMER (ARM_IRQ0_BASE + 0) -+#define INTERRUPT_ARM_MAILBOX (ARM_IRQ0_BASE + 1) -+#define INTERRUPT_ARM_DOORBELL_0 (ARM_IRQ0_BASE + 2) -+#define INTERRUPT_ARM_DOORBELL_1 (ARM_IRQ0_BASE + 3) -+#define INTERRUPT_VPU0_HALTED (ARM_IRQ0_BASE + 4) -+#define INTERRUPT_VPU1_HALTED (ARM_IRQ0_BASE + 5) -+#define INTERRUPT_ILLEGAL_TYPE0 (ARM_IRQ0_BASE + 6) -+#define INTERRUPT_ILLEGAL_TYPE1 (ARM_IRQ0_BASE + 7) -+#define INTERRUPT_PENDING1 (ARM_IRQ0_BASE + 8) -+#define INTERRUPT_PENDING2 (ARM_IRQ0_BASE + 9) -+#define INTERRUPT_JPEG (ARM_IRQ0_BASE + 10) -+#define INTERRUPT_USB (ARM_IRQ0_BASE + 11) -+#define INTERRUPT_3D (ARM_IRQ0_BASE + 12) -+#define INTERRUPT_DMA2 (ARM_IRQ0_BASE + 13) -+#define INTERRUPT_DMA3 (ARM_IRQ0_BASE + 14) -+#define INTERRUPT_I2C (ARM_IRQ0_BASE + 15) -+#define INTERRUPT_SPI (ARM_IRQ0_BASE + 16) -+#define INTERRUPT_I2SPCM (ARM_IRQ0_BASE + 17) -+#define INTERRUPT_SDIO (ARM_IRQ0_BASE + 18) -+#define INTERRUPT_UART (ARM_IRQ0_BASE + 19) -+#define INTERRUPT_ARASANSDIO (ARM_IRQ0_BASE + 20) -+ -+#define ARM_IRQ_LOCAL_BASE 96 -+#define INTERRUPT_ARM_LOCAL_CNTPSIRQ (ARM_IRQ_LOCAL_BASE + 0) -+#define INTERRUPT_ARM_LOCAL_CNTPNSIRQ (ARM_IRQ_LOCAL_BASE + 1) -+#define INTERRUPT_ARM_LOCAL_CNTHPIRQ (ARM_IRQ_LOCAL_BASE + 2) -+#define INTERRUPT_ARM_LOCAL_CNTVIRQ (ARM_IRQ_LOCAL_BASE + 3) -+#define INTERRUPT_ARM_LOCAL_MAILBOX0 (ARM_IRQ_LOCAL_BASE + 4) -+#define INTERRUPT_ARM_LOCAL_MAILBOX1 (ARM_IRQ_LOCAL_BASE + 5) -+#define INTERRUPT_ARM_LOCAL_MAILBOX2 (ARM_IRQ_LOCAL_BASE + 6) -+#define INTERRUPT_ARM_LOCAL_MAILBOX3 (ARM_IRQ_LOCAL_BASE + 7) -+#define INTERRUPT_ARM_LOCAL_GPU_FAST (ARM_IRQ_LOCAL_BASE + 8) -+#define INTERRUPT_ARM_LOCAL_PMU_FAST (ARM_IRQ_LOCAL_BASE + 9) -+#define INTERRUPT_ARM_LOCAL_ZERO (ARM_IRQ_LOCAL_BASE + 10) -+#define INTERRUPT_ARM_LOCAL_TIMER (ARM_IRQ_LOCAL_BASE + 11) -+ -+/* -+ * Watchdog -+ */ -+#define PM_RSTC (PM_BASE+0x1c) -+#define PM_RSTS (PM_BASE+0x20) -+#define PM_WDOG (PM_BASE+0x24) -+ -+#define PM_WDOG_RESET 0000000000 -+#define PM_PASSWORD 0x5a000000 -+#define PM_WDOG_TIME_SET 0x000fffff -+#define PM_RSTC_WRCFG_CLR 0xffffffcf -+#define PM_RSTC_WRCFG_SET 0x00000030 -+#define PM_RSTC_WRCFG_FULL_RESET 0x00000020 -+#define PM_RSTC_RESET 0x00000102 -+ -+#define PM_RSTS_HADPOR_SET 0x00001000 -+#define PM_RSTS_HADSRH_SET 0x00000400 -+#define PM_RSTS_HADSRF_SET 0x00000200 -+#define PM_RSTS_HADSRQ_SET 0x00000100 -+#define PM_RSTS_HADWRH_SET 0x00000040 -+#define PM_RSTS_HADWRF_SET 0x00000020 -+#define PM_RSTS_HADWRQ_SET 0x00000010 -+#define PM_RSTS_HADDRH_SET 0x00000004 -+#define PM_RSTS_HADDRF_SET 0x00000002 -+#define PM_RSTS_HADDRQ_SET 0x00000001 -+ -+#define UART0_CLOCK 3000000 -+ -+#endif -+ -+/* END */ ---- /dev/null -+++ b/arch/arm/mach-bcm2709/include/mach/system.h -@@ -0,0 +1,38 @@ -+/* -+ * arch/arm/mach-bcm2708/include/mach/system.h -+ * -+ * Copyright (C) 2010 Broadcom -+ * Copyright (C) 2003 ARM Limited -+ * Copyright (C) 2000 Deep Blue Solutions Ltd -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+#ifndef __ASM_ARCH_SYSTEM_H -+#define __ASM_ARCH_SYSTEM_H -+ -+#include <linux/io.h> -+#include <mach/hardware.h> -+#include <mach/platform.h> -+ -+static inline void arch_idle(void) -+{ -+ /* -+ * This should do all the clock switching -+ * and wait for interrupt tricks -+ */ -+ cpu_do_idle(); -+} -+ -+#endif ---- /dev/null -+++ b/arch/arm/mach-bcm2709/include/mach/timex.h -@@ -0,0 +1,23 @@ -+/* -+ * arch/arm/mach-bcm2708/include/mach/timex.h -+ * -+ * BCM2708 sysem clock frequency -+ * -+ * Copyright (C) 2010 Broadcom -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+ -+#define CLOCK_TICK_RATE (1000000) ---- /dev/null -+++ b/arch/arm/mach-bcm2709/include/mach/uncompress.h -@@ -0,0 +1,84 @@ -+/* -+ * arch/arm/mach-bcn2708/include/mach/uncompress.h -+ * -+ * Copyright (C) 2010 Broadcom -+ * Copyright (C) 2003 ARM Limited -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+ -+#include <linux/io.h> -+#include <linux/amba/serial.h> -+#include <mach/hardware.h> -+ -+#define UART_BAUD 115200 -+ -+#define BCM2708_UART_DR __io(UART0_BASE + UART01x_DR) -+#define BCM2708_UART_FR __io(UART0_BASE + UART01x_FR) -+#define BCM2708_UART_IBRD __io(UART0_BASE + UART011_IBRD) -+#define BCM2708_UART_FBRD __io(UART0_BASE + UART011_FBRD) -+#define BCM2708_UART_LCRH __io(UART0_BASE + UART011_LCRH) -+#define BCM2708_UART_CR __io(UART0_BASE + UART011_CR) -+ -+/* -+ * This does not append a newline -+ */ -+static inline void putc(int c) -+{ -+ while (__raw_readl(BCM2708_UART_FR) & UART01x_FR_TXFF) -+ barrier(); -+ -+ __raw_writel(c, BCM2708_UART_DR); -+} -+ -+static inline void flush(void) -+{ -+ int fr; -+ -+ do { -+ fr = __raw_readl(BCM2708_UART_FR); -+ barrier(); -+ } while ((fr & (UART011_FR_TXFE | UART01x_FR_BUSY)) != UART011_FR_TXFE); -+} -+ -+static inline void arch_decomp_setup(void) -+{ -+ int temp, div, rem, frac; -+ -+ temp = 16 * UART_BAUD; -+ div = UART0_CLOCK / temp; -+ rem = UART0_CLOCK % temp; -+ temp = (8 * rem) / UART_BAUD; -+ frac = (temp >> 1) + (temp & 1); -+ -+ /* Make sure the UART is disabled before we start */ -+ __raw_writel(0, BCM2708_UART_CR); -+ -+ /* Set the baud rate */ -+ __raw_writel(div, BCM2708_UART_IBRD); -+ __raw_writel(frac, BCM2708_UART_FBRD); -+ -+ /* Set the UART to 8n1, FIFO enabled */ -+ __raw_writel(UART01x_LCRH_WLEN_8 | UART01x_LCRH_FEN, BCM2708_UART_LCRH); -+ -+ /* Enable the UART */ -+ __raw_writel(UART01x_CR_UARTEN | UART011_CR_TXE | UART011_CR_RXE, -+ BCM2708_UART_CR); -+} -+ -+/* -+ * nothing to do -+ */ -+#define arch_decomp_wdog() ---- /dev/null -+++ b/arch/arm/mach-bcm2709/include/mach/vc_mem.h -@@ -0,0 +1,35 @@ -+/***************************************************************************** -+* Copyright 2010 - 2011 Broadcom Corporation. All rights reserved. -+* -+* Unless you and Broadcom execute a separate written software license -+* agreement governing use of this software, this software is licensed to you -+* under the terms of the GNU General Public License version 2, available at -+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -+* -+* Notwithstanding the above, under no circumstances may you combine this -+* software in any way with any other Broadcom software provided under a -+* license other than the GPL, without Broadcom's express prior written -+* consent. -+*****************************************************************************/ -+ -+#if !defined( VC_MEM_H ) -+#define VC_MEM_H -+ -+#include <linux/ioctl.h> -+ -+#define VC_MEM_IOC_MAGIC 'v' -+ -+#define VC_MEM_IOC_MEM_PHYS_ADDR _IOR( VC_MEM_IOC_MAGIC, 0, unsigned long ) -+#define VC_MEM_IOC_MEM_SIZE _IOR( VC_MEM_IOC_MAGIC, 1, unsigned int ) -+#define VC_MEM_IOC_MEM_BASE _IOR( VC_MEM_IOC_MAGIC, 2, unsigned int ) -+#define VC_MEM_IOC_MEM_LOAD _IOR( VC_MEM_IOC_MAGIC, 3, unsigned int ) -+ -+#if defined( __KERNEL__ ) -+#define VC_MEM_TO_ARM_ADDR_MASK 0x3FFFFFFF -+ -+extern unsigned long mm_vc_mem_phys_addr; -+extern unsigned int mm_vc_mem_size; -+extern int vc_mem_get_current_size( void ); -+#endif -+ -+#endif /* VC_MEM_H */ ---- /dev/null -+++ b/arch/arm/mach-bcm2709/include/mach/vc_support.h -@@ -0,0 +1,69 @@ -+#ifndef _VC_SUPPORT_H_ -+#define _VC_SUPPORT_H_ -+ -+/* -+ * vc_support.h -+ * -+ * Created on: 25 Nov 2012 -+ * Author: Simon -+ */ -+ -+enum { -+/* -+ If a MEM_HANDLE_T is discardable, the memory manager may resize it to size -+ 0 at any time when it is not locked or retained. -+ */ -+ MEM_FLAG_DISCARDABLE = 1 << 0, -+ -+ /* -+ If a MEM_HANDLE_T is allocating (or normal), its block of memory will be -+ accessed in an allocating fashion through the cache. -+ */ -+ MEM_FLAG_NORMAL = 0 << 2, -+ MEM_FLAG_ALLOCATING = MEM_FLAG_NORMAL, -+ -+ /* -+ If a MEM_HANDLE_T is direct, its block of memory will be accessed -+ directly, bypassing the cache. -+ */ -+ MEM_FLAG_DIRECT = 1 << 2, -+ -+ /* -+ If a MEM_HANDLE_T is coherent, its block of memory will be accessed in a -+ non-allocating fashion through the cache. -+ */ -+ MEM_FLAG_COHERENT = 2 << 2, -+ -+ /* -+ If a MEM_HANDLE_T is L1-nonallocating, its block of memory will be accessed by -+ the VPU in a fashion which is allocating in L2, but only coherent in L1. -+ */ -+ MEM_FLAG_L1_NONALLOCATING = (MEM_FLAG_DIRECT | MEM_FLAG_COHERENT), -+ -+ /* -+ If a MEM_HANDLE_T is zero'd, its contents are set to 0 rather than -+ MEM_HANDLE_INVALID on allocation and resize up. -+ */ -+ MEM_FLAG_ZERO = 1 << 4, -+ -+ /* -+ If a MEM_HANDLE_T is uninitialised, it will not be reset to a defined value -+ (either zero, or all 1's) on allocation. -+ */ -+ MEM_FLAG_NO_INIT = 1 << 5, -+ -+ /* -+ Hints. -+ */ -+ MEM_FLAG_HINT_PERMALOCK = 1 << 6, /* Likely to be locked for long periods of time. */ -+}; -+ -+unsigned int AllocateVcMemory(unsigned int *pHandle, unsigned int size, unsigned int alignment, unsigned int flags); -+unsigned int ReleaseVcMemory(unsigned int handle); -+unsigned int LockVcMemory(unsigned int *pBusAddress, unsigned int handle); -+unsigned int UnlockVcMemory(unsigned int handle); -+ -+unsigned int ExecuteVcCode(unsigned int code, -+ unsigned int r0, unsigned int r1, unsigned int r2, unsigned int r3, unsigned int r4, unsigned int r5); -+ -+#endif ---- /dev/null -+++ b/arch/arm/mach-bcm2709/include/mach/vmalloc.h -@@ -0,0 +1,20 @@ -+/* -+ * arch/arm/mach-bcm2708/include/mach/vmalloc.h -+ * -+ * Copyright (C) 2010 Broadcom -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+#define VMALLOC_END (0xff000000) ---- /dev/null -+++ b/arch/arm/mach-bcm2709/vc_mem.c -@@ -0,0 +1,431 @@ -+/***************************************************************************** -+* Copyright 2010 - 2011 Broadcom Corporation. All rights reserved. -+* -+* Unless you and Broadcom execute a separate written software license -+* agreement governing use of this software, this software is licensed to you -+* under the terms of the GNU General Public License version 2, available at -+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -+* -+* Notwithstanding the above, under no circumstances may you combine this -+* software in any way with any other Broadcom software provided under a -+* license other than the GPL, without Broadcom's express prior written -+* consent. -+*****************************************************************************/ -+ -+#include <linux/kernel.h> -+#include <linux/module.h> -+#include <linux/fs.h> -+#include <linux/device.h> -+#include <linux/cdev.h> -+#include <linux/mm.h> -+#include <linux/slab.h> -+#include <linux/debugfs.h> -+#include <asm/uaccess.h> -+#include <linux/dma-mapping.h> -+#include <linux/platform_data/mailbox-bcm2708.h> -+ -+#ifdef CONFIG_ARCH_KONA -+#include <chal/chal_ipc.h> -+#elif defined(CONFIG_ARCH_BCM2708) || defined(CONFIG_ARCH_BCM2709) -+#else -+#include <csp/chal_ipc.h> -+#endif -+ -+#include "mach/vc_mem.h" -+ -+#define DRIVER_NAME "vc-mem" -+ -+// Device (/dev) related variables -+static dev_t vc_mem_devnum = 0; -+static struct class *vc_mem_class = NULL; -+static struct cdev vc_mem_cdev; -+static int vc_mem_inited = 0; -+ -+#ifdef CONFIG_DEBUG_FS -+static struct dentry *vc_mem_debugfs_entry; -+#endif -+ -+/* -+ * Videocore memory addresses and size -+ * -+ * Drivers that wish to know the videocore memory addresses and sizes should -+ * use these variables instead of the MM_IO_BASE and MM_ADDR_IO defines in -+ * headers. This allows the other drivers to not be tied down to a a certain -+ * address/size at compile time. -+ * -+ * In the future, the goal is to have the videocore memory virtual address and -+ * size be calculated at boot time rather than at compile time. The decision of -+ * where the videocore memory resides and its size would be in the hands of the -+ * bootloader (and/or kernel). When that happens, the values of these variables -+ * would be calculated and assigned in the init function. -+ */ -+// in the 2835 VC in mapped above ARM, but ARM has full access to VC space -+unsigned long mm_vc_mem_phys_addr = 0x00000000; -+unsigned int mm_vc_mem_size = 0; -+unsigned int mm_vc_mem_base = 0; -+ -+EXPORT_SYMBOL(mm_vc_mem_phys_addr); -+EXPORT_SYMBOL(mm_vc_mem_size); -+EXPORT_SYMBOL(mm_vc_mem_base); -+ -+static uint phys_addr = 0; -+static uint mem_size = 0; -+static uint mem_base = 0; -+ -+ -+/**************************************************************************** -+* -+* vc_mem_open -+* -+***************************************************************************/ -+ -+static int -+vc_mem_open(struct inode *inode, struct file *file) -+{ -+ (void) inode; -+ (void) file; -+ -+ pr_debug("%s: called file = 0x%p\n", __func__, file); -+ -+ return 0; -+} -+ -+/**************************************************************************** -+* -+* vc_mem_release -+* -+***************************************************************************/ -+ -+static int -+vc_mem_release(struct inode *inode, struct file *file) -+{ -+ (void) inode; -+ (void) file; -+ -+ pr_debug("%s: called file = 0x%p\n", __func__, file); -+ -+ return 0; -+} -+ -+/**************************************************************************** -+* -+* vc_mem_get_size -+* -+***************************************************************************/ -+ -+static void -+vc_mem_get_size(void) -+{ -+} -+ -+/**************************************************************************** -+* -+* vc_mem_get_base -+* -+***************************************************************************/ -+ -+static void -+vc_mem_get_base(void) -+{ -+} -+ -+/**************************************************************************** -+* -+* vc_mem_get_current_size -+* -+***************************************************************************/ -+ -+int -+vc_mem_get_current_size(void) -+{ -+ return mm_vc_mem_size; -+} -+ -+EXPORT_SYMBOL_GPL(vc_mem_get_current_size); -+ -+/**************************************************************************** -+* -+* vc_mem_ioctl -+* -+***************************************************************************/ -+ -+static long -+vc_mem_ioctl(struct file *file, unsigned int cmd, unsigned long arg) -+{ -+ int rc = 0; -+ -+ (void) cmd; -+ (void) arg; -+ -+ pr_debug("%s: called file = 0x%p\n", __func__, file); -+ -+ switch (cmd) { -+ case VC_MEM_IOC_MEM_PHYS_ADDR: -+ { -+ pr_debug("%s: VC_MEM_IOC_MEM_PHYS_ADDR=0x%p\n", -+ __func__, (void *) mm_vc_mem_phys_addr); -+ -+ if (copy_to_user((void *) arg, &mm_vc_mem_phys_addr, -+ sizeof (mm_vc_mem_phys_addr)) != 0) { -+ rc = -EFAULT; -+ } -+ break; -+ } -+ case VC_MEM_IOC_MEM_SIZE: -+ { -+ // Get the videocore memory size first -+ vc_mem_get_size(); -+ -+ pr_debug("%s: VC_MEM_IOC_MEM_SIZE=%u\n", __func__, -+ mm_vc_mem_size); -+ -+ if (copy_to_user((void *) arg, &mm_vc_mem_size, -+ sizeof (mm_vc_mem_size)) != 0) { -+ rc = -EFAULT; -+ } -+ break; -+ } -+ case VC_MEM_IOC_MEM_BASE: -+ { -+ // Get the videocore memory base -+ vc_mem_get_base(); -+ -+ pr_debug("%s: VC_MEM_IOC_MEM_BASE=%u\n", __func__, -+ mm_vc_mem_base); -+ -+ if (copy_to_user((void *) arg, &mm_vc_mem_base, -+ sizeof (mm_vc_mem_base)) != 0) { -+ rc = -EFAULT; -+ } -+ break; -+ } -+ case VC_MEM_IOC_MEM_LOAD: -+ { -+ // Get the videocore memory base -+ vc_mem_get_base(); -+ -+ pr_debug("%s: VC_MEM_IOC_MEM_LOAD=%u\n", __func__, -+ mm_vc_mem_base); -+ -+ if (copy_to_user((void *) arg, &mm_vc_mem_base, -+ sizeof (mm_vc_mem_base)) != 0) { -+ rc = -EFAULT; -+ } -+ break; -+ } -+ default: -+ { -+ return -ENOTTY; -+ } -+ } -+ pr_debug("%s: file = 0x%p returning %d\n", __func__, file, rc); -+ -+ return rc; -+} -+ -+/**************************************************************************** -+* -+* vc_mem_mmap -+* -+***************************************************************************/ -+ -+static int -+vc_mem_mmap(struct file *filp, struct vm_area_struct *vma) -+{ -+ int rc = 0; -+ unsigned long length = vma->vm_end - vma->vm_start; -+ unsigned long offset = vma->vm_pgoff << PAGE_SHIFT; -+ -+ pr_debug("%s: vm_start = 0x%08lx vm_end = 0x%08lx vm_pgoff = 0x%08lx\n", -+ __func__, (long) vma->vm_start, (long) vma->vm_end, -+ (long) vma->vm_pgoff); -+ -+ if (offset + length > mm_vc_mem_size) { -+ pr_err("%s: length %ld is too big\n", __func__, length); -+ return -EINVAL; -+ } -+ // Do not cache the memory map -+ vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); -+ -+ rc = remap_pfn_range(vma, vma->vm_start, -+ (mm_vc_mem_phys_addr >> PAGE_SHIFT) + -+ vma->vm_pgoff, length, vma->vm_page_prot); -+ if (rc != 0) { -+ pr_err("%s: remap_pfn_range failed (rc=%d)\n", __func__, rc); -+ } -+ -+ return rc; -+} -+ -+/**************************************************************************** -+* -+* File Operations for the driver. -+* -+***************************************************************************/ -+ -+static const struct file_operations vc_mem_fops = { -+ .owner = THIS_MODULE, -+ .open = vc_mem_open, -+ .release = vc_mem_release, -+ .unlocked_ioctl = vc_mem_ioctl, -+ .mmap = vc_mem_mmap, -+}; -+ -+#ifdef CONFIG_DEBUG_FS -+static void vc_mem_debugfs_deinit(void) -+{ -+ debugfs_remove_recursive(vc_mem_debugfs_entry); -+ vc_mem_debugfs_entry = NULL; -+} -+ -+ -+static int vc_mem_debugfs_init( -+ struct device *dev) -+{ -+ vc_mem_debugfs_entry = debugfs_create_dir(DRIVER_NAME, NULL); -+ if (!vc_mem_debugfs_entry) { -+ dev_warn(dev, "could not create debugfs entry\n"); -+ return -EFAULT; -+ } -+ -+ if (!debugfs_create_x32("vc_mem_phys_addr", -+ 0444, -+ vc_mem_debugfs_entry, -+ (u32 *)&mm_vc_mem_phys_addr)) { -+ dev_warn(dev, "%s:could not create vc_mem_phys entry\n", -+ __func__); -+ goto fail; -+ } -+ -+ if (!debugfs_create_x32("vc_mem_size", -+ 0444, -+ vc_mem_debugfs_entry, -+ (u32 *)&mm_vc_mem_size)) { -+ dev_warn(dev, "%s:could not create vc_mem_size entry\n", -+ __func__); -+ goto fail; -+ } -+ -+ if (!debugfs_create_x32("vc_mem_base", -+ 0444, -+ vc_mem_debugfs_entry, -+ (u32 *)&mm_vc_mem_base)) { -+ dev_warn(dev, "%s:could not create vc_mem_base entry\n", -+ __func__); -+ goto fail; -+ } -+ -+ return 0; -+ -+fail: -+ vc_mem_debugfs_deinit(); -+ return -EFAULT; -+} -+ -+#endif /* CONFIG_DEBUG_FS */ -+ -+ -+/**************************************************************************** -+* -+* vc_mem_init -+* -+***************************************************************************/ -+ -+static int __init -+vc_mem_init(void) -+{ -+ int rc = -EFAULT; -+ struct device *dev; -+ -+ pr_debug("%s: called\n", __func__); -+ -+ mm_vc_mem_phys_addr = phys_addr; -+ mm_vc_mem_size = mem_size; -+ mm_vc_mem_base = mem_base; -+ -+ vc_mem_get_size(); -+ -+ pr_info("vc-mem: phys_addr:0x%08lx mem_base=0x%08x mem_size:0x%08x(%u MiB)\n", -+ mm_vc_mem_phys_addr, mm_vc_mem_base, mm_vc_mem_size, mm_vc_mem_size / (1024 * 1024)); -+ -+ if ((rc = alloc_chrdev_region(&vc_mem_devnum, 0, 1, DRIVER_NAME)) < 0) { -+ pr_err("%s: alloc_chrdev_region failed (rc=%d)\n", -+ __func__, rc); -+ goto out_err; -+ } -+ -+ cdev_init(&vc_mem_cdev, &vc_mem_fops); -+ if ((rc = cdev_add(&vc_mem_cdev, vc_mem_devnum, 1)) != 0) { -+ pr_err("%s: cdev_add failed (rc=%d)\n", __func__, rc); -+ goto out_unregister; -+ } -+ -+ vc_mem_class = class_create(THIS_MODULE, DRIVER_NAME); -+ if (IS_ERR(vc_mem_class)) { -+ rc = PTR_ERR(vc_mem_class); -+ pr_err("%s: class_create failed (rc=%d)\n", __func__, rc); -+ goto out_cdev_del; -+ } -+ -+ dev = device_create(vc_mem_class, NULL, vc_mem_devnum, NULL, -+ DRIVER_NAME); -+ if (IS_ERR(dev)) { -+ rc = PTR_ERR(dev); -+ pr_err("%s: device_create failed (rc=%d)\n", __func__, rc); -+ goto out_class_destroy; -+ } -+ -+#ifdef CONFIG_DEBUG_FS -+ /* don't fail if the debug entries cannot be created */ -+ vc_mem_debugfs_init(dev); -+#endif -+ -+ vc_mem_inited = 1; -+ return 0; -+ -+ device_destroy(vc_mem_class, vc_mem_devnum); -+ -+ out_class_destroy: -+ class_destroy(vc_mem_class); -+ vc_mem_class = NULL; -+ -+ out_cdev_del: -+ cdev_del(&vc_mem_cdev); -+ -+ out_unregister: -+ unregister_chrdev_region(vc_mem_devnum, 1); -+ -+ out_err: -+ return -1; -+} -+ -+/**************************************************************************** -+* -+* vc_mem_exit -+* -+***************************************************************************/ -+ -+static void __exit -+vc_mem_exit(void) -+{ -+ pr_debug("%s: called\n", __func__); -+ -+ if (vc_mem_inited) { -+#if CONFIG_DEBUG_FS -+ vc_mem_debugfs_deinit(); -+#endif -+ device_destroy(vc_mem_class, vc_mem_devnum); -+ class_destroy(vc_mem_class); -+ cdev_del(&vc_mem_cdev); -+ unregister_chrdev_region(vc_mem_devnum, 1); -+ } -+} -+ -+module_init(vc_mem_init); -+module_exit(vc_mem_exit); -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Broadcom Corporation"); -+ -+module_param(phys_addr, uint, 0644); -+module_param(mem_size, uint, 0644); -+module_param(mem_base, uint, 0644); ---- /dev/null -+++ b/arch/arm/mach-bcm2709/vc_support.c -@@ -0,0 +1,318 @@ -+/* -+ * vc_support.c -+ * -+ * Created on: 25 Nov 2012 -+ * Author: Simon -+ */ -+ -+#include <linux/module.h> -+#include <linux/platform_data/mailbox-bcm2708.h> -+ -+#ifdef ECLIPSE_IGNORE -+ -+#define __user -+#define __init -+#define __exit -+#define __iomem -+#define KERN_DEBUG -+#define KERN_ERR -+#define KERN_WARNING -+#define KERN_INFO -+#define _IOWR(a, b, c) b -+#define _IOW(a, b, c) b -+#define _IO(a, b) b -+ -+#endif -+ -+/****** VC MAILBOX FUNCTIONALITY ******/ -+unsigned int AllocateVcMemory(unsigned int *pHandle, unsigned int size, unsigned int alignment, unsigned int flags) -+{ -+ struct vc_msg -+ { -+ unsigned int m_msgSize; -+ unsigned int m_response; -+ -+ struct vc_tag -+ { -+ unsigned int m_tagId; -+ unsigned int m_sendBufferSize; -+ union { -+ unsigned int m_sendDataSize; -+ unsigned int m_recvDataSize; -+ }; -+ -+ struct args -+ { -+ union { -+ unsigned int m_size; -+ unsigned int m_handle; -+ }; -+ unsigned int m_alignment; -+ unsigned int m_flags; -+ } m_args; -+ } m_tag; -+ -+ unsigned int m_endTag; -+ } msg; -+ int s; -+ -+ msg.m_msgSize = sizeof(msg); -+ msg.m_response = 0; -+ msg.m_endTag = 0; -+ -+ //fill in the tag for the allocation command -+ msg.m_tag.m_tagId = 0x3000c; -+ msg.m_tag.m_sendBufferSize = 12; -+ msg.m_tag.m_sendDataSize = 12; -+ -+ //fill in our args -+ msg.m_tag.m_args.m_size = size; -+ msg.m_tag.m_args.m_alignment = alignment; -+ msg.m_tag.m_args.m_flags = flags; -+ -+ //run the command -+ s = bcm_mailbox_property(&msg, sizeof(msg)); -+ -+ if (s == 0 && msg.m_response == 0x80000000 && msg.m_tag.m_recvDataSize == 0x80000004) -+ { -+ *pHandle = msg.m_tag.m_args.m_handle; -+ return 0; -+ } -+ else -+ { -+ printk(KERN_ERR "failed to allocate vc memory: s=%d response=%08x recv data size=%08x\n", -+ s, msg.m_response, msg.m_tag.m_recvDataSize); -+ return 1; -+ } -+} -+ -+unsigned int ReleaseVcMemory(unsigned int handle) -+{ -+ struct vc_msg -+ { -+ unsigned int m_msgSize; -+ unsigned int m_response; -+ -+ struct vc_tag -+ { -+ unsigned int m_tagId; -+ unsigned int m_sendBufferSize; -+ union { -+ unsigned int m_sendDataSize; -+ unsigned int m_recvDataSize; -+ }; -+ -+ struct args -+ { -+ union { -+ unsigned int m_handle; -+ unsigned int m_error; -+ }; -+ } m_args; -+ } m_tag; -+ -+ unsigned int m_endTag; -+ } msg; -+ int s; -+ -+ msg.m_msgSize = sizeof(msg); -+ msg.m_response = 0; -+ msg.m_endTag = 0; -+ -+ //fill in the tag for the release command -+ msg.m_tag.m_tagId = 0x3000f; -+ msg.m_tag.m_sendBufferSize = 4; -+ msg.m_tag.m_sendDataSize = 4; -+ -+ //pass across the handle -+ msg.m_tag.m_args.m_handle = handle; -+ -+ s = bcm_mailbox_property(&msg, sizeof(msg)); -+ -+ if (s == 0 && msg.m_response == 0x80000000 && msg.m_tag.m_recvDataSize == 0x80000004 && msg.m_tag.m_args.m_error == 0) -+ return 0; -+ else -+ { -+ printk(KERN_ERR "failed to release vc memory: s=%d response=%08x recv data size=%08x error=%08x\n", -+ s, msg.m_response, msg.m_tag.m_recvDataSize, msg.m_tag.m_args.m_error); -+ return 1; -+ } -+} -+ -+unsigned int LockVcMemory(unsigned int *pBusAddress, unsigned int handle) -+{ -+ struct vc_msg -+ { -+ unsigned int m_msgSize; -+ unsigned int m_response; -+ -+ struct vc_tag -+ { -+ unsigned int m_tagId; -+ unsigned int m_sendBufferSize; -+ union { -+ unsigned int m_sendDataSize; -+ unsigned int m_recvDataSize; -+ }; -+ -+ struct args -+ { -+ union { -+ unsigned int m_handle; -+ unsigned int m_busAddress; -+ }; -+ } m_args; -+ } m_tag; -+ -+ unsigned int m_endTag; -+ } msg; -+ int s; -+ -+ msg.m_msgSize = sizeof(msg); -+ msg.m_response = 0; -+ msg.m_endTag = 0; -+ -+ //fill in the tag for the lock command -+ msg.m_tag.m_tagId = 0x3000d; -+ msg.m_tag.m_sendBufferSize = 4; -+ msg.m_tag.m_sendDataSize = 4; -+ -+ //pass across the handle -+ msg.m_tag.m_args.m_handle = handle; -+ -+ s = bcm_mailbox_property(&msg, sizeof(msg)); -+ -+ if (s == 0 && msg.m_response == 0x80000000 && msg.m_tag.m_recvDataSize == 0x80000004) -+ { -+ //pick out the bus address -+ *pBusAddress = msg.m_tag.m_args.m_busAddress; -+ return 0; -+ } -+ else -+ { -+ printk(KERN_ERR "failed to lock vc memory: s=%d response=%08x recv data size=%08x\n", -+ s, msg.m_response, msg.m_tag.m_recvDataSize); -+ return 1; -+ } -+} -+ -+unsigned int UnlockVcMemory(unsigned int handle) -+{ -+ struct vc_msg -+ { -+ unsigned int m_msgSize; -+ unsigned int m_response; -+ -+ struct vc_tag -+ { -+ unsigned int m_tagId; -+ unsigned int m_sendBufferSize; -+ union { -+ unsigned int m_sendDataSize; -+ unsigned int m_recvDataSize; -+ }; -+ -+ struct args -+ { -+ union { -+ unsigned int m_handle; -+ unsigned int m_error; -+ }; -+ } m_args; -+ } m_tag; -+ -+ unsigned int m_endTag; -+ } msg; -+ int s; -+ -+ msg.m_msgSize = sizeof(msg); -+ msg.m_response = 0; -+ msg.m_endTag = 0; -+ -+ //fill in the tag for the unlock command -+ msg.m_tag.m_tagId = 0x3000e; -+ msg.m_tag.m_sendBufferSize = 4; -+ msg.m_tag.m_sendDataSize = 4; -+ -+ //pass across the handle -+ msg.m_tag.m_args.m_handle = handle; -+ -+ s = bcm_mailbox_property(&msg, sizeof(msg)); -+ -+ //check the error code too -+ if (s == 0 && msg.m_response == 0x80000000 && msg.m_tag.m_recvDataSize == 0x80000004 && msg.m_tag.m_args.m_error == 0) -+ return 0; -+ else -+ { -+ printk(KERN_ERR "failed to unlock vc memory: s=%d response=%08x recv data size=%08x error%08x\n", -+ s, msg.m_response, msg.m_tag.m_recvDataSize, msg.m_tag.m_args.m_error); -+ return 1; -+ } -+} -+ -+unsigned int ExecuteVcCode(unsigned int code, -+ unsigned int r0, unsigned int r1, unsigned int r2, unsigned int r3, unsigned int r4, unsigned int r5) -+{ -+ struct vc_msg -+ { -+ unsigned int m_msgSize; -+ unsigned int m_response; -+ -+ struct vc_tag -+ { -+ unsigned int m_tagId; -+ unsigned int m_sendBufferSize; -+ union { -+ unsigned int m_sendDataSize; -+ unsigned int m_recvDataSize; -+ }; -+ -+ struct args -+ { -+ union { -+ unsigned int m_pCode; -+ unsigned int m_return; -+ }; -+ unsigned int m_r0; -+ unsigned int m_r1; -+ unsigned int m_r2; -+ unsigned int m_r3; -+ unsigned int m_r4; -+ unsigned int m_r5; -+ } m_args; -+ } m_tag; -+ -+ unsigned int m_endTag; -+ } msg; -+ int s; -+ -+ msg.m_msgSize = sizeof(msg); -+ msg.m_response = 0; -+ msg.m_endTag = 0; -+ -+ //fill in the tag for the unlock command -+ msg.m_tag.m_tagId = 0x30010; -+ msg.m_tag.m_sendBufferSize = 28; -+ msg.m_tag.m_sendDataSize = 28; -+ -+ //pass across the handle -+ msg.m_tag.m_args.m_pCode = code; -+ msg.m_tag.m_args.m_r0 = r0; -+ msg.m_tag.m_args.m_r1 = r1; -+ msg.m_tag.m_args.m_r2 = r2; -+ msg.m_tag.m_args.m_r3 = r3; -+ msg.m_tag.m_args.m_r4 = r4; -+ msg.m_tag.m_args.m_r5 = r5; -+ -+ s = bcm_mailbox_property(&msg, sizeof(msg)); -+ -+ //check the error code too -+ if (s == 0 && msg.m_response == 0x80000000 && msg.m_tag.m_recvDataSize == 0x80000004) -+ return msg.m_tag.m_args.m_return; -+ else -+ { -+ printk(KERN_ERR "failed to execute: s=%d response=%08x recv data size=%08x\n", -+ s, msg.m_response, msg.m_tag.m_recvDataSize); -+ return 1; -+ } -+} ---- a/arch/arm/mm/Kconfig -+++ b/arch/arm/mm/Kconfig -@@ -358,7 +358,7 @@ config CPU_PJ4B - - # ARMv6 - config CPU_V6 -- bool "Support ARM V6 processor" if (!ARCH_MULTIPLATFORM || ARCH_MULTI_V6) && (ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX) -+ bool "Support ARM V6 processor" if (!ARCH_MULTIPLATFORM || ARCH_MULTI_V6) && (ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX || MACH_BCM2708) - select CPU_32v6 - select CPU_ABRT_EV6 - select CPU_CACHE_V6 ---- a/arch/arm/mm/proc-v6.S -+++ b/arch/arm/mm/proc-v6.S -@@ -73,10 +73,19 @@ ENDPROC(cpu_v6_reset) - * - * IRQs are already disabled. - */ -+ -+/* See jira SW-5991 for details of this workaround */ - ENTRY(cpu_v6_do_idle) -- mov r1, #0 -- mcr p15, 0, r1, c7, c10, 4 @ DWB - WFI may enter a low-power mode -- mcr p15, 0, r1, c7, c0, 4 @ wait for interrupt -+ .align 5 -+ mov r1, #2 -+1: subs r1, #1 -+ nop -+ mcreq p15, 0, r1, c7, c10, 4 @ DWB - WFI may enter a low-power mode -+ mcreq p15, 0, r1, c7, c0, 4 @ wait for interrupt -+ nop -+ nop -+ nop -+ bne 1b - ret lr - - ENTRY(cpu_v6_dcache_clean_area) ---- a/arch/arm/mm/proc-v7.S -+++ b/arch/arm/mm/proc-v7.S -@@ -460,6 +460,7 @@ __v7_setup_cont: - orr r0, r0, r6 @ set them - THUMB( orr r0, r0, #1 << 30 ) @ Thumb exceptions - ret lr @ return to head.S:__ret -+ .space 256 - ENDPROC(__v7_setup) - - .align 2 ---- a/arch/arm/tools/mach-types -+++ b/arch/arm/tools/mach-types -@@ -522,6 +522,8 @@ torbreck MACH_TORBRECK TORBRECK 3090 - prima2_evb MACH_PRIMA2_EVB PRIMA2_EVB 3103 - paz00 MACH_PAZ00 PAZ00 3128 - acmenetusfoxg20 MACH_ACMENETUSFOXG20 ACMENETUSFOXG20 3129 -+bcm2708 MACH_BCM2708 BCM2708 3138 -+bcm2709 MACH_BCM2709 BCM2709 3139 - ag5evm MACH_AG5EVM AG5EVM 3189 - ics_if_voip MACH_ICS_IF_VOIP ICS_IF_VOIP 3206 - wlf_cragg_6410 MACH_WLF_CRAGG_6410 WLF_CRAGG_6410 3207 ---- a/drivers/clocksource/arm_arch_timer.c -+++ b/drivers/clocksource/arm_arch_timer.c -@@ -882,3 +882,39 @@ void __init acpi_generic_timer_init(void - acpi_table_parse(ACPI_SIG_GTDT, arch_timer_acpi_init); - } - #endif -+ -+int __init dc4_arch_timer_init(void) -+{ -+ if (arch_timers_present & ARCH_CP15_TIMER) { -+ pr_warn("arch_timer: multiple nodes in dt, skipping\n"); -+ return -1; -+ } -+ -+ arch_timers_present |= ARCH_CP15_TIMER; -+ -+ /* Try to determine the frequency from the device tree or CNTFRQ */ -+ arch_timer_rate = 19200000; -+ -+ arch_timer_ppi[PHYS_SECURE_PPI] = IRQ_ARM_LOCAL_CNTPSIRQ; -+ arch_timer_ppi[PHYS_NONSECURE_PPI] = IRQ_ARM_LOCAL_CNTPNSIRQ; -+ arch_timer_ppi[VIRT_PPI] = IRQ_ARM_LOCAL_CNTVIRQ; -+ arch_timer_ppi[HYP_PPI] = IRQ_ARM_LOCAL_CNTHPIRQ; -+ -+ /* -+ * If HYP mode is available, we know that the physical timer -+ * has been configured to be accessible from PL1. Use it, so -+ * that a guest can use the virtual timer instead. -+ * -+ * If no interrupt provided for virtual timer, we'll have to -+ * stick to the physical timer. It'd better be accessible... -+ */ -+ if (is_hyp_mode_available() || !arch_timer_ppi[VIRT_PPI]) { -+ arch_timer_use_virtual = false; -+ } -+ -+ arch_timer_c3stop = 0; -+ -+ arch_timer_register(); -+ arch_timer_common_init(); -+ return 0; -+} ---- a/drivers/tty/serial/amba-pl011.c -+++ b/drivers/tty/serial/amba-pl011.c -@@ -85,7 +85,7 @@ struct vendor_data { - - static unsigned int get_fifosize_arm(struct amba_device *dev) - { -- return amba_rev(dev) < 3 ? 16 : 32; -+ return 16; //TODO: fix: amba_rev(dev) < 3 ? 16 : 32; - } - - static struct vendor_data vendor_arm = { ---- a/include/linux/mmc/host.h -+++ b/include/linux/mmc/host.h -@@ -285,6 +285,7 @@ struct mmc_host { - MMC_CAP2_HS400_1_2V) - #define MMC_CAP2_HSX00_1_2V (MMC_CAP2_HS200_1_2V_SDR | MMC_CAP2_HS400_1_2V) - #define MMC_CAP2_SDIO_IRQ_NOTHREAD (1 << 17) -+#define MMC_CAP2_FORCE_MULTIBLOCK (1 << 31) /* Always use multiblock transfers */ - - mmc_pm_flag_t pm_caps; /* supported pm features */ - |