ipq806x: Add support for IPQ806x chip family

Patches are generated using the "format-patch" command from the
following location:
*https://www.codeaurora.org/cgit/quic/kernel/galak-msm/log/?h=apq_ipq_base
*rev=0771849495b4128cac2faf7d49c85c729fc48b20
Patches numbered 76/77/102/103 have already been integrated in 3.14.12,
so they're not in this list.

All these patches are either integrated are pending integration into
kernel.org, therefore these patches should go away once the kernel
gets upgraded to 3.16.

Support is currently limited to AP148 board but can be extended to other
platforms in the future.

These changes do not cover ethernet connectivity.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 42334

1 files changed, 162 insertions, 0 deletions

diff --git a/target/linux/ipq806x/patches/0159-arm-ipq8064-Add-USB3-DT-information.patch b/target/linux/ipq806x/patches/0159-arm-ipq8064-Add-USB3-DT-information.patch
new file mode 100644
index 0000000000..5a0d099af8
--- /dev/null
+++ b/target/linux/ipq806x/patches/0159-arm-ipq8064-Add-USB3-DT-information.patch
@@ -0,0 +1,162 @@
+From 269a71c81438604d27f01ec703daa7f5e3f39e8b Mon Sep 17 00:00:00 2001
+From: Andy Gross <agross@codeaurora.org>
+Date: Sun, 15 Jun 2014 00:48:18 -0500
+Subject: [PATCH 159/182] arm: ipq8064: Add USB3 DT information
+
+This patch fleshes out the USB3 specific information for the IPQ8064 platform.
+
+Signed-off-by: Andy Gross <agross@codeaurora.org>
+---
+ arch/arm/boot/dts/qcom-ipq8064-ap148.dts |   29 ++++++++++
+ arch/arm/boot/dts/qcom-ipq8064.dtsi      |   90 ++++++++++++++++++++++++++++++
+ 2 files changed, 119 insertions(+)
+
+diff --git a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+index 4062eb6..2b2d63c 100644
+--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
++++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+@@ -160,5 +160,34 @@
+ 			pinctrl-0 = <&nand_pins>;
+ 			pinctrl-names = "default";
+ 		};
++
++		tcsr@1a400000 {
++			status = "ok";
++			qcom,usb-ctrl-select = <TCSR_USB_SELECT_USB3_DUAL>;
++		};
++
++		phy@100f8800 {		/* USB3 port 1 HS phy */
++			status = "ok";
++		};
++
++		phy@100f8830 {		/* USB3 port 1 SS phy */
++			status = "ok";
++		};
++
++		phy@110f8800 {		/* USB3 port 0 HS phy */
++			status = "ok";
++		};
++
++		phy@110f8830 {		/* USB3 port 0 SS phy */
++			status = "ok";
++		};
++
++		usb30@0 {
++			status = "ok";
++		};
++
++		usb30@1 {
++			status = "ok";
++		};
+ 	};
+ };
+diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
+index d9fce15..6be6ac9 100644
+--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
+@@ -4,6 +4,7 @@
+ #include <dt-bindings/clock/qcom,gcc-ipq806x.h>
+ #include <dt-bindings/reset/qcom,gcc-ipq806x.h>
+ #include <dt-bindings/soc/qcom,gsbi.h>
++#include <dt-bindings/soc/qcom,tcsr.h>
+ 
+ / {
+ 	model = "Qualcomm IPQ8064";
+@@ -402,5 +403,94 @@
+ 
+ 			status = "disabled";
+ 		};
++
++		tcsr: tcsr@1a400000 {
++			compatible = "qcom,tcsr";
++			reg = <0x1a400000 0x100>;
++
++			status = "disabled";
++		};
++
++		hs_phy_1: phy@100f8800 {
++			compatible = "qcom,dwc3-hsphy";
++			reg = <0x100f8800 0x30>;
++			clocks = <&gcc USB30_1_UTMI_CLK>;
++			clock-names = "utmi";
++
++			status = "disabled";
++		};
++
++		ss_phy_1: phy@100f8830 {
++			compatible = "qcom,dwc3-ssphy";
++			reg = <0x100f8830 0x30>;
++
++			clocks = <&gcc USB30_1_MASTER_CLK>;
++			clock-names = "ref";
++
++			status = "disabled";
++		};
++
++		hs_phy_0: phy@110f8800 {
++			compatible = "qcom,dwc3-hsphy";
++			reg = <0x110f8800 0x30>;
++			clocks = <&gcc USB30_0_UTMI_CLK>;
++			clock-names = "utmi";
++
++			status = "disabled";
++		};
++
++		ss_phy_0: phy@110f8830 {
++			compatible = "qcom,dwc3-ssphy";
++			reg = <0x110f8830 0x30>;
++
++			clocks = <&gcc USB30_0_MASTER_CLK>;
++			clock-names = "ref";
++
++			status = "disabled";
++		};
++
++		usb3_0: usb30@0 {
++			compatible = "qcom,dwc3";
++			#address-cells = <1>;
++			#size-cells = <1>;
++			clocks = <&gcc USB30_0_MASTER_CLK>;
++			clock-names = "core";
++
++			ranges;
++
++			status = "disabled";
++
++			dwc3@11000000 {
++				compatible = "snps,dwc3";
++				reg = <0x11000000 0xcd00>;
++				interrupts = <0 110 0x4>;
++				usb-phy = <&hs_phy_0>, <&ss_phy_0>;
++				phy-names = "usb2-phy", "usb3-phy";
++				tx-fifo-resize;
++				dr_mode = "host";
++			};
++		};
++
++		usb3_1: usb30@1 {
++			compatible = "qcom,dwc3";
++			#address-cells = <1>;
++			#size-cells = <1>;
++			clocks = <&gcc USB30_1_MASTER_CLK>;
++			clock-names = "core";
++
++			ranges;
++
++			status = "disabled";
++
++			dwc3@10000000 {
++				compatible = "snps,dwc3";
++				reg = <0x10000000 0xcd00>;
++				interrupts = <0 205 0x4>;
++				usb-phy = <&hs_phy_1>, <&ss_phy_1>;
++				phy-names = "usb2-phy", "usb3-phy";
++				tx-fifo-resize;
++				dr_mode = "host";
++			};
++		};
+ 	};
+ };
+-- 
+1.7.10.4
+