diff options
author | Lars-Peter Clausen <lars@metafoo.de> | 2010-08-29 21:10:59 +0000 |
---|---|---|
committer | Lars-Peter Clausen <lars@metafoo.de> | 2010-08-29 21:10:59 +0000 |
commit | 429c8a56b6b9a1ada2d10d17488b29590232c579 (patch) | |
tree | d77f05c13a8ff26133fad3669a81903c31db9112 /target/linux/kirkwood/patches/100-dockstar.patch | |
parent | 014765e77cc3ae594f482ac98f9ca4fa08c29981 (diff) | |
download | master-31e0f0ae-429c8a56b6b9a1ada2d10d17488b29590232c579.tar.gz master-31e0f0ae-429c8a56b6b9a1ada2d10d17488b29590232c579.tar.bz2 master-31e0f0ae-429c8a56b6b9a1ada2d10d17488b29590232c579.zip |
Use kirkwood_nand_init instead of manually registering the nand driver
This fixes that the device would hang during boot.
SVN-Revision: 22837
Diffstat (limited to 'target/linux/kirkwood/patches/100-dockstar.patch')
-rw-r--r-- | target/linux/kirkwood/patches/100-dockstar.patch | 35 |
1 files changed, 4 insertions, 31 deletions
diff --git a/target/linux/kirkwood/patches/100-dockstar.patch b/target/linux/kirkwood/patches/100-dockstar.patch index f6ac90b7a8..59334b4cda 100644 --- a/target/linux/kirkwood/patches/100-dockstar.patch +++ b/target/linux/kirkwood/patches/100-dockstar.patch @@ -38,7 +38,7 @@ Signed-off-by: Eric Cooper <ecc@xxxxxxx> obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o --- /dev/null +++ b/arch/arm/mach-kirkwood/dockstar-setup.c -@@ -0,0 +1,148 @@ +@@ -0,0 +1,121 @@ +/* + * arch/arm/mach-kirkwood/dockstar-setup.c + * @@ -61,7 +61,6 @@ Signed-off-by: Eric Cooper <ecc@xxxxxxx> +#include <asm/mach/arch.h> +#include <mach/kirkwood.h> +#include <plat/mvsdio.h> -+#include <plat/orion_nand.h> +#include "common.h" +#include "mpp.h" + @@ -81,7 +80,7 @@ Signed-off-by: Eric Cooper <ecc@xxxxxxx> + }, { + .name = "rootfs", + .offset = MTDPART_OFS_NXTBLK, -+ .size = SZ_64M, ++ .size = SZ_32M, + }, { + .name = "data", + .offset = MTDPART_OFS_NXTBLK, @@ -89,33 +88,6 @@ Signed-off-by: Eric Cooper <ecc@xxxxxxx> + }, +}; + -+static struct resource dockstar_nand_resource = { -+ .flags = IORESOURCE_MEM, -+ .start = KIRKWOOD_NAND_MEM_PHYS_BASE, -+ .end = KIRKWOOD_NAND_MEM_PHYS_BASE + -+ KIRKWOOD_NAND_MEM_SIZE - 1, -+}; -+ -+static struct orion_nand_data dockstar_nand_data = { -+ .parts = dockstar_nand_parts, -+ .nr_parts = ARRAY_SIZE(dockstar_nand_parts), -+ .cle = 0, -+ .ale = 1, -+ .width = 8, -+ .chip_delay = 25, -+}; -+ -+static struct platform_device dockstar_nand_flash = { -+ .name = "orion_nand", -+ .id = -1, -+ .dev = { -+ .platform_data = &dockstar_nand_data, -+ }, -+ .resource = &dockstar_nand_resource, -+ .num_resources = 1, -+}; -+ -+ +static struct mv643xx_eth_platform_data dockstar_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; @@ -172,9 +144,10 @@ Signed-off-by: Eric Cooper <ecc@xxxxxxx> + printk(KERN_ERR "can't set up GPIO 29 (USB Power Enable)\n"); + kirkwood_ehci_init(); + ++ kirkwood_nand_init(ARRAY_AND_SIZE(dockstar_nand_parts), 25); ++ + kirkwood_ge00_init(&dockstar_ge00_data); + -+ platform_device_register(&dockstar_nand_flash); + platform_device_register(&dockstar_leds); +} + |