diff options
| author | Gabor Juhos <juhosg@openwrt.org> | 2012-08-29 10:37:36 +0000 |
|---|---|---|
| committer | Gabor Juhos <juhosg@openwrt.org> | 2012-08-29 10:37:36 +0000 |
| commit | 3b17f1deb84ad3f3fa0c98a4cf2cda971fcb3bb3 (patch) | |
| tree | 0713e1f4d96ec443b34572c18e77d9ccdf1646f3 /target/linux/ramips/base-files/etc/uci-defaults/network | |
| parent | 358c7e47f29745cf7b7617b59aa5265414a8dad0 (diff) | |
| download | master-31e0f0ae-3b17f1deb84ad3f3fa0c98a4cf2cda971fcb3bb3.tar.gz master-31e0f0ae-3b17f1deb84ad3f3fa0c98a4cf2cda971fcb3bb3.tar.bz2 master-31e0f0ae-3b17f1deb84ad3f3fa0c98a4cf2cda971fcb3bb3.zip | |
ramips: Add swconfig support to ramips_esw.c
Add swconfig support to ramips_esw.c
This patch adds swconfig support for ramips_esw:
Tested on both D-LINK DIR-300 B1 and Sitecom WL-351 (external
rtl8366rb on internal port 5).
I've made sure that in the enable_vlan=0 case it behaves like a dumb
switch, so external switches should work fine with vlans and
verified this on the WL-351.
The current state shown by swconfig is always read directly from HW
registers, new settings only show after 'swconfig dev rt305x set apply'.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 33299
Diffstat (limited to 'target/linux/ramips/base-files/etc/uci-defaults/network')
0 files changed, 0 insertions, 0 deletions