diff options
author | Gabor Juhos <juhosg@openwrt.org> | 2009-09-04 15:08:26 +0000 |
---|---|---|
committer | Gabor Juhos <juhosg@openwrt.org> | 2009-09-04 15:08:26 +0000 |
commit | 8d8a4e727481a58495f8c3b9dfd2e92650d85e10 (patch) | |
tree | 08dcd82358322b24a2b85a010a18144d7721ac83 /target/linux/ramips | |
parent | 8691bbb699556ab797d74d635cc360732d9b92de (diff) | |
download | master-31e0f0ae-8d8a4e727481a58495f8c3b9dfd2e92650d85e10.tar.gz master-31e0f0ae-8d8a4e727481a58495f8c3b9dfd2e92650d85e10.tar.bz2 master-31e0f0ae-8d8a4e727481a58495f8c3b9dfd2e92650d85e10.zip |
add GPIO configuration feature
SVN-Revision: 17512
Diffstat (limited to 'target/linux/ramips')
11 files changed, 197 insertions, 4 deletions
diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/common.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/common.h index 9e0fdeca6a..4fd732432c 100644 --- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/common.h +++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/common.h @@ -17,6 +17,7 @@ void __init ramips_intc_irq_init(unsigned intc_base, unsigned irq, u32 ramips_intc_get_status(void); void __init ramips_soc_setup(void); +void __init ramips_gpio_init(void); void __init ramips_early_serial_setup(int line, unsigned base, unsigned freq, unsigned irq); diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt288x.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt288x.h index 445bafa3d0..a804488f08 100644 --- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt288x.h +++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt288x.h @@ -1,7 +1,7 @@ /* * Ralink RT288x SoC specific definitions * - * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> * * Parts of this file are based on Ralink's 2.6.21 BSP @@ -68,4 +68,6 @@ static inline u32 rt288x_memc_rr(unsigned reg) return __raw_readl(rt288x_memc_base + reg); } +void rt288x_gpio_init(u32 mode) __init; + #endif /* _RT228X_H_ */ diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt288x_regs.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt288x_regs.h index 98308ffe01..d29880611e 100644 --- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt288x_regs.h +++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt288x_regs.h @@ -46,6 +46,7 @@ #define SYSC_REG_SYSTEM_CONFIG 0x010 /* System Configuration */ #define SYSC_REG_RESET_CTRL 0x034 /* Reset Control*/ #define SYSC_REG_RESET_STATUS 0x038 /* Reset Status*/ +#define SYSC_REG_GPIO_MODE 0x060 /* GPIO Purpose Select */ #define SYSC_REG_IA_ADDRESS 0x310 /* Illegal Access Address */ #define SYSC_REG_IA_TYPE 0x314 /* Illegal Access Type */ @@ -75,6 +76,15 @@ #define RT2880_RESET_FE BIT(18) #define RT2880_RESET_PCM BIT(19) +#define RT2880_GPIO_MODE_I2C BIT(0) +#define RT2880_GPIO_MODE_UART0 BIT(1) +#define RT2880_GPIO_MODE_SPI BIT(2) +#define RT2880_GPIO_MODE_UART1 BIT(3) +#define RT2880_GPIO_MODE_JTAG BIT(4) +#define RT2880_GPIO_MODE_MDIO BIT(5) +#define RT2880_GPIO_MODE_SDRAM BIT(6) +#define RT2880_GPIO_MODE_PCI BIT(7) + #define RT2880_INTC_INT_TIMER0 BIT(0) #define RT2880_INTC_INT_TIMER1 BIT(1) #define RT2880_INTC_INT_UART0 BIT(2) diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt305x.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt305x.h index c9d5b4458b..195bfbe51a 100644 --- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt305x.h +++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt305x.h @@ -73,4 +73,59 @@ static inline u32 rt305x_memc_rr(unsigned reg) return __raw_readl(rt305x_memc_base + reg); } +#define RT305X_GPIO_I2C_SD 1 +#define RT305X_GPIO_I2C_SCLK 2 +#define RT305X_GPIO_SPI_EN 3 +#define RT305X_GPIO_SPI_CLK 4 +#define RT305X_GPIO_SPI_DOUT 5 +#define RT305X_GPIO_SPI_DIN 6 +/* GPIO 7-14 is shared between UART0, PCM and I2S interfaces */ +#define RT305X_GPIO_7 7 +#define RT305X_GPIO_8 8 +#define RT305X_GPIO_9 9 +#define RT305X_GPIO_10 10 +#define RT305X_GPIO_11 11 +#define RT305X_GPIO_12 12 +#define RT305X_GPIO_13 13 +#define RT305X_GPIO_14 14 +#define RT305X_GPIO_UART1_TXD 15 +#define RT305X_GPIO_UART1_RXD 16 +#define RT305X_GPIO_JTAG_TDO 17 +#define RT305X_GPIO_JTAG_TDI 18 +#define RT305X_GPIO_JTAG_TMS 19 +#define RT305X_GPIO_JTAG_TCLK 20 +#define RT305X_GPIO_JTAG_TRST_N 21 +#define RT305X_GPIO_MDIO_MDC 22 +#define RT305X_GPIO_MDIO_MDIO 23 +#define RT305X_GPIO_SDRAM_MD16 24 +#define RT305X_GPIO_SDRAM_MD17 25 +#define RT305X_GPIO_SDRAM_MD18 26 +#define RT305X_GPIO_SDRAM_MD19 27 +#define RT305X_GPIO_SDRAM_MD20 28 +#define RT305X_GPIO_SDRAM_MD21 29 +#define RT305X_GPIO_SDRAM_MD22 30 +#define RT305X_GPIO_SDRAM_MD23 31 +#define RT305X_GPIO_SDRAM_MD24 32 +#define RT305X_GPIO_SDRAM_MD25 33 +#define RT305X_GPIO_SDRAM_MD26 34 +#define RT305X_GPIO_SDRAM_MD27 35 +#define RT305X_GPIO_SDRAM_MD28 36 +#define RT305X_GPIO_SDRAM_MD29 37 +#define RT305X_GPIO_SDRAM_MD30 38 +#define RT305X_GPIO_SDRAM_MD31 39 +#define RT305X_GPIO_GE0_TXD0 40 +#define RT305X_GPIO_GE0_TXD1 41 +#define RT305X_GPIO_GE0_TXD2 42 +#define RT305X_GPIO_GE0_TXD3 43 +#define RT305X_GPIO_GE0_TXEN 44 +#define RT305X_GPIO_GE0_TXCLK 45 +#define RT305X_GPIO_GE0_RXD0 46 +#define RT305X_GPIO_GE0_RXD1 47 +#define RT305X_GPIO_GE0_RXD2 48 +#define RT305X_GPIO_GE0_RXD3 49 +#define RT305X_GPIO_GE0_RXDV 50 +#define RT305X_GPIO_GE0_RXCLK 51 + +void rt305x_gpio_init(u32 mode) __init; + #endif /* _RT305X_H_ */ diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt305x_regs.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt305x_regs.h index d4a1920633..7f0666d5b1 100644 --- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt305x_regs.h +++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt305x_regs.h @@ -49,6 +49,7 @@ #define SYSC_REG_SYSTEM_CONFIG 0x010 /* System Configuration */ #define SYSC_REG_RESET_CTRL 0x034 /* Reset Control*/ #define SYSC_REG_RESET_STATUS 0x038 /* Reset Status*/ +#define SYSC_REG_GPIO_MODE 0x060 /* GPIO Purpose Select */ #define SYSC_REG_IA_ADDRESS 0x310 /* Illegal Access Address */ #define SYSC_REG_IA_TYPE 0x314 /* Illegal Access Type */ @@ -61,6 +62,25 @@ #define SYSTEM_CONFIG_CPUCLK_320 0x0 #define SYSTEM_CONFIG_CPUCLK_384 0x1 +#define RT305X_GPIO_MODE_I2C BIT(0) +#define RT305X_GPIO_MODE_SPI BIT(1) +#define RT305X_GPIO_MODE_UART0_SHIFT 2 +#define RT305X_GPIO_MODE_UART0_MASK 0x7 +#define RT305X_GPIO_MODE_UART0(x) ((x) << RT305X_GPIO_MODE_UART0_SHIFT) +#define RT305X_GPIO_MODE_UARTF 0x0 +#define RT305X_GPIO_MODE_PCM_UARTF 0x1 +#define RT305X_GPIO_MODE_PCM_I2S 0x2 +#define RT305X_GPIO_MODE_I2S_UARTF 0x3 +#define RT305X_GPIO_MODE_PCM_GPIO 0x4 +#define RT305X_GPIO_MODE_GPIO_UARTF 0x5 +#define RT305X_GPIO_MODE_GPIO_I2S 0x6 +#define RT305X_GPIO_MODE_GPIO 0x7 +#define RT305X_GPIO_MODE_UART1 BIT(5) +#define RT305X_GPIO_MODE_JTAG BIT(6) +#define RT305X_GPIO_MODE_MDIO BIT(7) +#define RT305X_GPIO_MODE_SDRAM BIT(8) +#define RT305X_GPIO_MODE_RGMII BIT(9) + #define RT305X_RESET_SYSTEM BIT(0) #define RT305X_RESET_TIMER BIT(8) #define RT305X_RESET_INTC BIT(9) diff --git a/target/linux/ramips/files/arch/mips/ralink/common/gpio.c b/target/linux/ramips/files/arch/mips/ralink/common/gpio.c index f882b925a5..4e90df0247 100644 --- a/target/linux/ramips/files/arch/mips/ralink/common/gpio.c +++ b/target/linux/ramips/files/arch/mips/ralink/common/gpio.c @@ -220,5 +220,3 @@ __init int ramips_gpio_init(void) return 0; } - -arch_initcall(ramips_gpio_init); diff --git a/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-rt-n15.c b/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-rt-n15.c index be5c815cb5..26f08845ba 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-rt-n15.c +++ b/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-rt-n15.c @@ -18,10 +18,14 @@ #include <asm/mips_machine.h> #include <asm/mach-ralink/machine.h> #include <asm/mach-ralink/dev_gpio_leds.h> +#include <asm/mach-ralink/rt288x.h> +#include <asm/mach-ralink/rt288x_regs.h> #include "devices.h" #define RT_N15_GPIO_LED_POWER 11 +#define RT_N15_GPIO_BUTTON_WPS 0 +#define RT_N15_GPIO_BUTTON_RESET 12 #ifdef CONFIG_MTD_PARTITIONS static struct mtd_partition rt_n15_partitions[] = { @@ -73,6 +77,8 @@ static struct gpio_led rt_n15_leds_gpio[] __initdata = { static void __init rt_n15_init(void) { + rt288x_gpio_init(RT2880_GPIO_MODE_UART0); + rt288x_register_flash(0, &rt_n15_flash_data); ramips_register_gpio_leds(-1, ARRAY_SIZE(rt_n15_leds_gpio), diff --git a/target/linux/ramips/files/arch/mips/ralink/rt288x/rt288x.c b/target/linux/ramips/files/arch/mips/ralink/rt288x/rt288x.c index e7c3787e1b..49a301a1e1 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt288x/rt288x.c +++ b/target/linux/ramips/files/arch/mips/ralink/rt288x/rt288x.c @@ -1,7 +1,7 @@ /* * Ralink RT288x SoC specific setup * - * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> * * Parts of this file are based on Ralink's 2.6.21 BSP @@ -14,6 +14,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/module.h> +#include <linux/gpio.h> #include <asm/mach-ralink/common.h> #include <asm/mach-ralink/rt288x.h> @@ -73,3 +74,35 @@ void __init rt288x_detect_sys_freq(void) rt288x_sys_freq = rt288x_cpu_freq / 2; } +static void rt288x_gpio_reserve(int first, int last) +{ + for (; first <= last; first++) + gpio_request(first, "reserved"); +} + +void __init rt288x_gpio_init(u32 mode) +{ + rt288x_sysc_wr(mode, SYSC_REG_GPIO_MODE); + + ramips_gpio_init(); + if ((mode & RT2880_GPIO_MODE_I2C) == 0) + rt288x_gpio_reserve(1, 2); + + if ((mode & RT2880_GPIO_MODE_SPI) == 0) + rt288x_gpio_reserve(3, 6); + + if ((mode & RT2880_GPIO_MODE_UART0) == 0) + rt288x_gpio_reserve(7, 14); + + if ((mode & RT2880_GPIO_MODE_JTAG) == 0) + rt288x_gpio_reserve(17, 21); + + if ((mode & RT2880_GPIO_MODE_MDIO) == 0) + rt288x_gpio_reserve(22, 23); + + if ((mode & RT2880_GPIO_MODE_SDRAM) == 0) + rt288x_gpio_reserve(24, 39); + + if ((mode & RT2880_GPIO_MODE_PCI) == 0) + rt288x_gpio_reserve(40, 71); +} diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-v22rw-2x2.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-v22rw-2x2.c index 1186763279..8bd2c956fd 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-v22rw-2x2.c +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-v22rw-2x2.c @@ -18,9 +18,13 @@ #include <asm/mips_machine.h> #include <asm/mach-ralink/machine.h> #include <asm/mach-ralink/dev_gpio_leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> #include "devices.h" +#define V22RW_2X2_GPIO_BUTTON_WPS 0 +#define V22RW_2X2_GPIO_BUTTON_SWRST 10 #define V22RW_2X2_GPIO_LED_SECURITY 13 #define V22RW_2X2_GPIO_LED_WPS 14 @@ -78,6 +82,8 @@ static struct gpio_led v22rw_2x2_leds_gpio[] __initdata = { static void __init v22rw_2x2_init(void) { + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + rt305x_register_flash(0, &v22rw_2x2_flash_data); ramips_register_gpio_leds(-1, ARRAY_SIZE(v22rw_2x2_leds_gpio), diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-whr-g300n.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-whr-g300n.c index 97fe857374..2c2f44469b 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-whr-g300n.c +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-whr-g300n.c @@ -18,6 +18,8 @@ #include <asm/mips_machine.h> #include <asm/mach-ralink/machine.h> #include <asm/mach-ralink/dev_gpio_leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> #include "devices.h" @@ -87,6 +89,8 @@ static struct gpio_led whr_g300n_leds_gpio[] __initdata = { static void __init whr_g300n_init(void) { + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + rt305x_register_flash(0, &whr_g300n_flash_data); ramips_register_gpio_leds(-1, ARRAY_SIZE(whr_g300n_leds_gpio), diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/rt305x.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/rt305x.c index 249da36b06..002aaebabd 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/rt305x.c +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/rt305x.c @@ -14,6 +14,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/module.h> +#include <linux/gpio.h> #include <asm/mach-ralink/common.h> #include <asm/mach-ralink/rt305x.h> @@ -66,3 +67,60 @@ void __init rt305x_detect_sys_freq(void) rt305x_sys_freq = rt305x_cpu_freq / 3; } + +static void rt305x_gpio_reserve(int first, int last) +{ + for (; first <= last; first++) + gpio_request(first, "reserved"); +} + +void __init rt305x_gpio_init(u32 mode) +{ + u32 t; + + rt305x_sysc_wr(mode, SYSC_REG_GPIO_MODE); + + ramips_gpio_init(); + if ((mode & RT305X_GPIO_MODE_I2C) == 0) + rt305x_gpio_reserve(RT305X_GPIO_I2C_SD, RT305X_GPIO_I2C_SCLK); + + if ((mode & RT305X_GPIO_MODE_SPI) == 0) + rt305x_gpio_reserve(RT305X_GPIO_SPI_EN, RT305X_GPIO_SPI_CLK); + + t = mode >> RT305X_GPIO_MODE_UART0_SHIFT; + t &= RT305X_GPIO_MODE_UART0_MASK; + switch (t) { + case RT305X_GPIO_MODE_UARTF: + case RT305X_GPIO_MODE_PCM_UARTF: + case RT305X_GPIO_MODE_PCM_I2S: + case RT305X_GPIO_MODE_I2S_UARTF: + rt305x_gpio_reserve(RT305X_GPIO_7, RT305X_GPIO_14); + break; + case RT305X_GPIO_MODE_PCM_GPIO: + rt305x_gpio_reserve(RT305X_GPIO_10, RT305X_GPIO_14); + break; + case RT305X_GPIO_MODE_GPIO_UARTF: + case RT305X_GPIO_MODE_GPIO_I2S: + rt305x_gpio_reserve(RT305X_GPIO_7, RT305X_GPIO_10); + break; + } + + if ((mode & RT305X_GPIO_MODE_UART1) == 0) + rt305x_gpio_reserve(RT305X_GPIO_UART1_TXD, + RT305X_GPIO_UART1_RXD); + + if ((mode & RT305X_GPIO_MODE_JTAG) == 0) + rt305x_gpio_reserve(RT305X_GPIO_JTAG_TDO, RT305X_GPIO_JTAG_TDI); + + if ((mode & RT305X_GPIO_MODE_MDIO) == 0) + rt305x_gpio_reserve(RT305X_GPIO_MDIO_MDC, + RT305X_GPIO_MDIO_MDIO); + + if ((mode & RT305X_GPIO_MODE_SDRAM) == 0) + rt305x_gpio_reserve(RT305X_GPIO_SDRAM_MD16, + RT305X_GPIO_SDRAM_MD31); + + if ((mode & RT305X_GPIO_MODE_RGMII) == 0) + rt305x_gpio_reserve(RT305X_GPIO_GE0_TXD0, + RT305X_GPIO_GE0_RXCLK); +} |