sunxi: driver refresh for 3.13 - update gmac / mmc / usb / ahci drivers to follow mainline dev trees - add driver for spi - update clock support - update a31 support - move to new DT compats where appropriate - re-order patchqueue where needed - verified working a20 smp - move most DTSes off files/ - update defconfig

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39782

1 files changed, 0 insertions, 38 deletions

diff --git a/target/linux/sunxi/patches-3.13/213-dt-sun7i-add-external-clk-outputs.patch b/target/linux/sunxi/patches-3.13/213-dt-sun7i-add-external-clk-outputs.patch
deleted file mode 100644
index 3dda2946d2..0000000000
--- a/target/linux/sunxi/patches-3.13/213-dt-sun7i-add-external-clk-outputs.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From f3a50c26f33a4627e5d3e35f80db3f22a5375237 Mon Sep 17 00:00:00 2001
-From: Chen-Yu Tsai <wens@csie.org>
-Date: Tue, 24 Dec 2013 21:26:20 +0800
-Subject: [PATCH] ARM: dts: sun7i: Add pin muxing options for clock outputs
-
-This patch adds the clock output pin options on the A20.
-The 2 pins can output a configurable clock to be used by
-external modules. This is used on the CubieTruck, to supply
-a 32768 Hz low power clock to the onboard Wifi+BT module.
-
-Signed-off-by: Chen-Yu Tsai <wens@csie.org>
----
- arch/arm/boot/dts/sun7i-a20.dtsi | 14 ++++++++++++++
- 1 file changed, 14 insertions(+)
-
---- a/arch/arm/boot/dts/sun7i-a20.dtsi
-+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
-@@ -490,6 +490,20 @@
- 				allwinner,drive = <3>;
- 				allwinner,pull = <0>;
- 			};
-+
-+			clk_out_a_pins: clk_out_a@0 {
-+				allwinner,pins = "PI12";
-+				allwinner,function = "clk_out_a";
-+				allwinner,drive = <0>;
-+				allwinner,pull = <0>;
-+			};
-+
-+			clk_out_b_pins: clk_out_b@0 {
-+				allwinner,pins = "PI13";
-+				allwinner,function = "clk_out_b";
-+				allwinner,drive = <0>;
-+				allwinner,pull = <0>;
-+			};
- 		};
- 
- 		sata: ahci@01c18000 {