summaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
authorGabor Juhos <juhosg@openwrt.org>2013-11-29 20:51:12 +0000
committerGabor Juhos <juhosg@openwrt.org>2013-11-29 20:51:12 +0000
commitbc2d7b8193b2d8f2ca11e4fad6249f44b8902b27 (patch)
tree4b672b4c3ace1a64f693d6b51e5c4a4dfe7c134d /target/linux
parentfd892350c2c999f00782012e1caa821696345f2f (diff)
downloadmaster-31e0f0ae-bc2d7b8193b2d8f2ca11e4fad6249f44b8902b27.tar.gz
master-31e0f0ae-bc2d7b8193b2d8f2ca11e4fad6249f44b8902b27.tar.bz2
master-31e0f0ae-bc2d7b8193b2d8f2ca11e4fad6249f44b8902b27.zip
ar71xx: add kernel support for the TL-WR1043ND v2 board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38955
Diffstat (limited to 'target/linux')
-rw-r--r--target/linux/ar71xx/config-3.101
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd-v2.c224
-rw-r--r--target/linux/ar71xx/patches-3.10/635-MIPS-ath79-add-TL-WR1043NDv2-suport.patch39
3 files changed, 264 insertions, 0 deletions
diff --git a/target/linux/ar71xx/config-3.10 b/target/linux/ar71xx/config-3.10
index dbce479761..0f8bfbcdce 100644
--- a/target/linux/ar71xx/config-3.10
+++ b/target/linux/ar71xx/config-3.10
@@ -80,6 +80,7 @@ CONFIG_ATH79_MACH_TL_WDR3500=y
CONFIG_ATH79_MACH_TL_WDR4300=y
CONFIG_ATH79_MACH_TL_WR1041N_V2=y
CONFIG_ATH79_MACH_TL_WR1043ND=y
+CONFIG_ATH79_MACH_TL_WR1043ND_V2=y
CONFIG_ATH79_MACH_TL_WR2543N=y
CONFIG_ATH79_MACH_TL_WR703N=y
CONFIG_ATH79_MACH_TL_WR720N_V3=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd-v2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd-v2.c
new file mode 100644
index 0000000000..0c415b969c
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd-v2.c
@@ -0,0 +1,224 @@
+/*
+ * TP-LINK TL-WR1043ND v2 board support
+ *
+ * Copyright (c) 2013 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * Based on the Qualcomm Atheros AP135/AP136 reference board support code
+ * Copyright (c) 2012 Qualcomm Atheros
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include <linux/phy.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/ar8216_platform.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define TL_WR1043_V2_GPIO_LED_WLAN 12
+#define TL_WR1043_V2_GPIO_LED_USB 15
+#define TL_WR1043_V2_GPIO_LED_WPS 18
+#define TL_WR1043_V2_GPIO_LED_SYSTEM 19
+
+#define TL_WR1043_V2_GPIO_BTN_RESET 16
+#define TL_WR1043_V2_GPIO_BTN_WLAN 17
+
+#define TL_WR1043_V2_GPIO_USB_POWER 21
+
+#define TL_WR1043_V2_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TL_WR1043_V2_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR1043_V2_KEYS_POLL_INTERVAL)
+
+#define TL_WR1043_V2_WMAC_CALDATA_OFFSET 0x1000
+
+static const char *wr1043nd_v2_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data wr1043nd_v2_flash_data = {
+ .part_probes = wr1043nd_v2_part_probes,
+};
+
+static struct gpio_led tl_wr1043_v2_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:green:wps",
+ .gpio = TL_WR1043_V2_GPIO_LED_WPS,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:green:system",
+ .gpio = TL_WR1043_V2_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:green:wlan",
+ .gpio = TL_WR1043_V2_GPIO_LED_WLAN,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:green:usb",
+ .gpio = TL_WR1043_V2_GPIO_LED_USB,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button tl_wr1043_v2_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TL_WR1043_V2_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR1043_V2_GPIO_BTN_RESET,
+ .active_low = 1,
+ },
+ {
+ .desc = "WLAN button",
+ .type = EV_KEY,
+ .code = KEY_WLAN,
+ .debounce_interval = TL_WR1043_V2_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR1043_V2_GPIO_BTN_WLAN,
+ .active_low = 1,
+ },
+};
+
+/* GMAC0 of the AR8327 switch is connected to the QCA9558 SoC via SGMII */
+static struct ar8327_pad_cfg wr1043nd_v2_ar8327_pad0_cfg = {
+ .mode = AR8327_PAD_MAC_SGMII,
+ .sgmii_delay_en = true,
+};
+
+/* GMAC6 of the AR8327 switch is connected to the QCA9558 SoC via RGMII */
+static struct ar8327_pad_cfg wr1043nd_v2_ar8327_pad6_cfg = {
+ .mode = AR8327_PAD_MAC_RGMII,
+ .txclk_delay_en = true,
+ .rxclk_delay_en = true,
+ .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
+ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
+};
+
+static struct ar8327_led_cfg wr1043nd_v2_ar8327_led_cfg = {
+ .led_ctrl0 = 0xcc35cc35,
+ .led_ctrl1 = 0xca35ca35,
+ .led_ctrl2 = 0xc935c935,
+ .led_ctrl3 = 0x03ffff00,
+ .open_drain = true,
+};
+
+static struct ar8327_platform_data wr1043nd_v2_ar8327_data = {
+ .pad0_cfg = &wr1043nd_v2_ar8327_pad0_cfg,
+ .pad6_cfg = &wr1043nd_v2_ar8327_pad6_cfg,
+ .port0_cfg = {
+ .force_link = 1,
+ .speed = AR8327_PORT_SPEED_1000,
+ .duplex = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ },
+ .port6_cfg = {
+ .force_link = 1,
+ .speed = AR8327_PORT_SPEED_1000,
+ .duplex = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ },
+ .led_cfg = &wr1043nd_v2_ar8327_led_cfg,
+};
+
+static struct mdio_board_info wr1043nd_v2_mdio0_info[] = {
+ {
+ .bus_id = "ag71xx-mdio.0",
+ .phy_addr = 0,
+ .platform_data = &wr1043nd_v2_ar8327_data,
+ },
+};
+
+static void __init wr1043nd_v2_gmac_setup(void)
+{
+ void __iomem *base;
+ u32 t;
+
+ base = ioremap(QCA955X_GMAC_BASE, QCA955X_GMAC_SIZE);
+
+ t = __raw_readl(base + QCA955X_GMAC_REG_ETH_CFG);
+
+ t &= ~(QCA955X_ETH_CFG_RGMII_EN | QCA955X_ETH_CFG_GE0_SGMII);
+ t |= QCA955X_ETH_CFG_RGMII_EN;
+
+ __raw_writel(t, base + QCA955X_GMAC_REG_ETH_CFG);
+
+ iounmap(base);
+}
+
+static void __init tl_wr1043nd_v2_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+ u8 tmpmac[ETH_ALEN];
+
+ ath79_register_m25p80(&wr1043nd_v2_flash_data);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr1043_v2_leds_gpio),
+ tl_wr1043_v2_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, TL_WR1043_V2_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_wr1043_v2_gpio_keys),
+ tl_wr1043_v2_gpio_keys);
+
+ ath79_init_mac(tmpmac, mac, -1);
+ ath79_register_wmac(art + TL_WR1043_V2_WMAC_CALDATA_OFFSET, tmpmac);
+
+ mdiobus_register_board_info(wr1043nd_v2_mdio0_info,
+ ARRAY_SIZE(wr1043nd_v2_mdio0_info));
+ ath79_register_mdio(0, 0x0);
+
+ wr1043nd_v2_gmac_setup();
+
+ /* GMAC0 is connected to the RMGII interface */
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = BIT(0);
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+ ath79_eth0_pll_data.pll_1000 = 0x56000000;
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
+ ath79_register_eth(0);
+
+ /* GMAC1 is connected to the SGMII interface */
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+ ath79_eth1_pll_data.pll_1000 = 0x03000101;
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
+ ath79_register_eth(1);
+
+ ath79_register_usb();
+
+ gpio_request_one(TL_WR1043_V2_GPIO_USB_POWER,
+ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "USB power");
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WR1043ND_V2, "TL-WR1043ND-v2",
+ "TP-LINK TL-WR1043ND v2", tl_wr1043nd_v2_setup);
+
diff --git a/target/linux/ar71xx/patches-3.10/635-MIPS-ath79-add-TL-WR1043NDv2-suport.patch b/target/linux/ar71xx/patches-3.10/635-MIPS-ath79-add-TL-WR1043NDv2-suport.patch
new file mode 100644
index 0000000000..bd75fa9bcd
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.10/635-MIPS-ath79-add-TL-WR1043NDv2-suport.patch
@@ -0,0 +1,39 @@
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -106,6 +106,7 @@ enum ath79_mach_type {
+ ATH79_MACH_TL_WDR4300, /* TP-LINK TL-WDR4300 */
+ ATH79_MACH_TL_WR1041N_V2, /* TP-LINK TL-WR1041N v2 */
+ ATH79_MACH_TL_WR1043ND, /* TP-LINK TL-WR1043ND */
++ ATH79_MACH_TL_WR1043ND_V2, /* TP-LINK TL-WR1043ND v2 */
+ ATH79_MACH_TL_WR2543N, /* TP-LINK TL-WR2543N/ND */
+ ATH79_MACH_TL_WR703N, /* TP-LINK TL-WR703N */
+ ATH79_MACH_TL_WR710N, /* TP-LINK TL-WR710N */
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -726,6 +726,16 @@ config ATH79_MACH_TL_WR1043ND
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
++config ATH79_MACH_TL_WR1043ND_V2
++ bool "TP-LINK TL-WR1043ND v2 support"
++ select SOC_QCA955X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_SPI
++ select ATH79_DEV_USB
++ select ATH79_DEV_WMAC
++
+ config ATH79_MACH_TL_WR2543N
+ bool "TP-LINK TL-WR2543N/ND support"
+ select SOC_AR724X
+--- a/arch/mips/ath79/Makefile
++++ b/arch/mips/ath79/Makefile
+@@ -100,6 +100,7 @@ obj-$(CONFIG_ATH79_MACH_TL_WR841N_V8) +=
+ obj-$(CONFIG_ATH79_MACH_TL_WR941ND) += mach-tl-wr941nd.o
+ obj-$(CONFIG_ATH79_MACH_TL_WR1041N_V2) += mach-tl-wr1041n-v2.o
+ obj-$(CONFIG_ATH79_MACH_TL_WR1043ND) += mach-tl-wr1043nd.o
++obj-$(CONFIG_ATH79_MACH_TL_WR1043ND_V2) += mach-tl-wr1043nd-v2.o
+ obj-$(CONFIG_ATH79_MACH_TL_WR2543N) += mach-tl-wr2543n.o
+ obj-$(CONFIG_ATH79_MACH_TL_WR703N) += mach-tl-wr703n.o
+ obj-$(CONFIG_ATH79_MACH_TL_WR720N_V3) += mach-tl-wr720n-v3.o