diff options
-rw-r--r-- | target/linux/rdc/Makefile | 2 | ||||
-rw-r--r-- | target/linux/rdc/patches-2.6.32/014-r6040_phylib_support.patch | 468 | ||||
-rw-r--r-- | target/linux/rdc/profiles/ar525w.mk | 4 |
3 files changed, 471 insertions, 3 deletions
diff --git a/target/linux/rdc/Makefile b/target/linux/rdc/Makefile index 738af3f02b..391ee68f83 100644 --- a/target/linux/rdc/Makefile +++ b/target/linux/rdc/Makefile @@ -16,7 +16,7 @@ LINUX_VERSION:=2.6.32.12 include $(INCLUDE_DIR)/target.mk -DEFAULT_PACKAGES += wpad-mini kmod-r6040 kmod-input-core \ +DEFAULT_PACKAGES += wpad-mini kmod-libphy kmod-r6040 kmod-input-core \ kmod-input-polldev kmod-input-gpio-buttons kmod-button-hotplug \ kmod-rdc321x-wdt diff --git a/target/linux/rdc/patches-2.6.32/014-r6040_phylib_support.patch b/target/linux/rdc/patches-2.6.32/014-r6040_phylib_support.patch new file mode 100644 index 0000000000..9a9422877a --- /dev/null +++ b/target/linux/rdc/patches-2.6.32/014-r6040_phylib_support.patch @@ -0,0 +1,468 @@ +Index: linux-2.6.32.12/drivers/net/r6040.c +=================================================================== +--- linux-2.6.32.12.orig/drivers/net/r6040.c 2010-05-20 10:19:41.000000000 +0200 ++++ linux-2.6.32.12/drivers/net/r6040.c 2010-05-20 10:28:48.000000000 +0200 +@@ -45,6 +45,7 @@ + #include <linux/io.h> + #include <linux/irq.h> + #include <linux/uaccess.h> ++#include <linux/phy.h> + + #include <asm/processor.h> + +@@ -180,7 +181,6 @@ + + struct r6040_private { + spinlock_t lock; /* driver lock */ +- struct timer_list timer; + struct pci_dev *pdev; + struct r6040_descriptor *rx_insert_ptr; + struct r6040_descriptor *rx_remove_ptr; +@@ -190,13 +190,15 @@ + struct r6040_descriptor *tx_ring; + dma_addr_t rx_ring_dma; + dma_addr_t tx_ring_dma; +- u16 tx_free_desc, phy_addr, phy_mode; ++ u16 tx_free_desc, phy_addr; + u16 mcr0, mcr1; +- u16 switch_sig; + struct net_device *dev; +- struct mii_if_info mii_if; ++ struct mii_bus *mii_bus; + struct napi_struct napi; + void __iomem *base; ++ struct phy_device *phydev; ++ int old_link; ++ int old_duplex; + }; + + static char version[] __devinitdata = KERN_INFO DRV_NAME +@@ -239,20 +241,29 @@ + } + } + +-static int r6040_mdio_read(struct net_device *dev, int mii_id, int reg) ++static int r6040_mdiobus_read(struct mii_bus *bus, int phy_addr, int reg) + { ++ struct net_device *dev = bus->priv; + struct r6040_private *lp = netdev_priv(dev); + void __iomem *ioaddr = lp->base; + +- return (r6040_phy_read(ioaddr, lp->phy_addr, reg)); ++ return r6040_phy_read(ioaddr, phy_addr, reg); + } + +-static void r6040_mdio_write(struct net_device *dev, int mii_id, int reg, int val) ++static int r6040_mdiobus_write(struct mii_bus *bus, int phy_addr, int reg, u16 value) + { ++ struct net_device *dev = bus->priv; + struct r6040_private *lp = netdev_priv(dev); + void __iomem *ioaddr = lp->base; + +- r6040_phy_write(ioaddr, lp->phy_addr, reg, val); ++ r6040_phy_write(ioaddr, phy_addr, reg, value); ++ ++ return 0; ++} ++ ++static int r6040_mdiobus_reset(struct mii_bus *bus) ++{ ++ return 0; + } + + static void r6040_free_txbufs(struct net_device *dev) +@@ -409,10 +420,9 @@ + void __iomem *ioaddr = priv->base; + + printk(KERN_WARNING "%s: transmit timed out, int enable %4.4x " +- "status %4.4x, PHY status %4.4x\n", ++ "status %4.4x\n", + dev->name, ioread16(ioaddr + MIER), +- ioread16(ioaddr + MISR), +- r6040_mdio_read(dev, priv->mii_if.phy_id, MII_BMSR)); ++ ioread16(ioaddr + MISR)); + + dev->stats.tx_errors++; + +@@ -464,9 +474,6 @@ + struct r6040_private *lp = netdev_priv(dev); + struct pci_dev *pdev = lp->pdev; + +- /* deleted timer */ +- del_timer_sync(&lp->timer); +- + spin_lock_irq(&lp->lock); + napi_disable(&lp->napi); + netif_stop_queue(dev); +@@ -496,64 +503,14 @@ + return 0; + } + +-/* Status of PHY CHIP */ +-static int r6040_phy_mode_chk(struct net_device *dev) +-{ +- struct r6040_private *lp = netdev_priv(dev); +- void __iomem *ioaddr = lp->base; +- int phy_dat; +- +- /* PHY Link Status Check */ +- phy_dat = r6040_phy_read(ioaddr, lp->phy_addr, 1); +- if (!(phy_dat & 0x4)) +- phy_dat = 0x8000; /* Link Failed, full duplex */ +- +- /* PHY Chip Auto-Negotiation Status */ +- phy_dat = r6040_phy_read(ioaddr, lp->phy_addr, 1); +- if (phy_dat & 0x0020) { +- /* Auto Negotiation Mode */ +- phy_dat = r6040_phy_read(ioaddr, lp->phy_addr, 5); +- phy_dat &= r6040_phy_read(ioaddr, lp->phy_addr, 4); +- if (phy_dat & 0x140) +- /* Force full duplex */ +- phy_dat = 0x8000; +- else +- phy_dat = 0; +- } else { +- /* Force Mode */ +- phy_dat = r6040_phy_read(ioaddr, lp->phy_addr, 0); +- if (phy_dat & 0x100) +- phy_dat = 0x8000; +- else +- phy_dat = 0x0000; +- } +- +- return phy_dat; +-}; +- +-static void r6040_set_carrier(struct mii_if_info *mii) +-{ +- if (r6040_phy_mode_chk(mii->dev)) { +- /* autoneg is off: Link is always assumed to be up */ +- if (!netif_carrier_ok(mii->dev)) +- netif_carrier_on(mii->dev); +- } else +- r6040_phy_mode_chk(mii->dev); +-} +- + static int r6040_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) + { + struct r6040_private *lp = netdev_priv(dev); +- struct mii_ioctl_data *data = if_mii(rq); +- int rc; + +- if (!netif_running(dev)) ++ if (!lp->phydev) + return -EINVAL; +- spin_lock_irq(&lp->lock); +- rc = generic_mii_ioctl(&lp->mii_if, data, cmd, NULL); +- spin_unlock_irq(&lp->lock); +- r6040_set_carrier(&lp->mii_if); +- return rc; ++ ++ return phy_mii_ioctl(lp->phydev, if_mii(rq), cmd); + } + + static int r6040_rx(struct net_device *dev, int limit) +@@ -752,26 +709,6 @@ + if (ret) + return ret; + +- /* Read the PHY ID */ +- lp->switch_sig = r6040_phy_read(ioaddr, 0, 2); +- +- if (lp->switch_sig == ICPLUS_PHY_ID) { +- r6040_phy_write(ioaddr, 29, 31, 0x175C); /* Enable registers */ +- lp->phy_mode = 0x8000; +- } else { +- /* PHY Mode Check */ +- r6040_phy_write(ioaddr, lp->phy_addr, 4, PHY_CAP); +- r6040_phy_write(ioaddr, lp->phy_addr, 0, PHY_MODE); +- +- if (PHY_MODE == 0x3100) +- lp->phy_mode = r6040_phy_mode_chk(dev); +- else +- lp->phy_mode = (PHY_MODE & 0x0100) ? 0x8000:0x0; +- } +- +- /* Set duplex mode */ +- lp->mcr0 |= lp->phy_mode; +- + /* improve performance (by RDC guys) */ + r6040_phy_write(ioaddr, 30, 17, (r6040_phy_read(ioaddr, 30, 17) | 0x4000)); + r6040_phy_write(ioaddr, 30, 17, ~((~r6040_phy_read(ioaddr, 30, 17)) | 0x2000)); +@@ -784,35 +721,6 @@ + return 0; + } + +-/* +- A periodic timer routine +- Polling PHY Chip Link Status +-*/ +-static void r6040_timer(unsigned long data) +-{ +- struct net_device *dev = (struct net_device *)data; +- struct r6040_private *lp = netdev_priv(dev); +- void __iomem *ioaddr = lp->base; +- u16 phy_mode; +- +- /* Polling PHY Chip Status */ +- if (PHY_MODE == 0x3100) +- phy_mode = r6040_phy_mode_chk(dev); +- else +- phy_mode = (PHY_MODE & 0x0100) ? 0x8000:0x0; +- +- if (phy_mode != lp->phy_mode) { +- lp->phy_mode = phy_mode; +- lp->mcr0 = (lp->mcr0 & 0x7fff) | phy_mode; +- iowrite16(lp->mcr0, ioaddr); +- } +- +- /* Timer active again */ +- mod_timer(&lp->timer, round_jiffies(jiffies + HZ)); +- +- /* Check media */ +- mii_check_media(&lp->mii_if, 1, 1); +-} + + /* Read/set MAC address routines */ + static void r6040_mac_address(struct net_device *dev) +@@ -874,10 +782,6 @@ + napi_enable(&lp->napi); + netif_start_queue(dev); + +- /* set and active a timer process */ +- setup_timer(&lp->timer, r6040_timer, (unsigned long) dev); +- if (lp->switch_sig != ICPLUS_PHY_ID) +- mod_timer(&lp->timer, jiffies + HZ); + return 0; + } + +@@ -1020,40 +924,22 @@ + static int netdev_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) + { + struct r6040_private *rp = netdev_priv(dev); +- int rc; +- +- spin_lock_irq(&rp->lock); +- rc = mii_ethtool_gset(&rp->mii_if, cmd); +- spin_unlock_irq(&rp->lock); + +- return rc; ++ return phy_ethtool_gset(rp->phydev, cmd); + } + + static int netdev_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) + { + struct r6040_private *rp = netdev_priv(dev); +- int rc; +- +- spin_lock_irq(&rp->lock); +- rc = mii_ethtool_sset(&rp->mii_if, cmd); +- spin_unlock_irq(&rp->lock); +- r6040_set_carrier(&rp->mii_if); +- +- return rc; +-} +- +-static u32 netdev_get_link(struct net_device *dev) +-{ +- struct r6040_private *rp = netdev_priv(dev); + +- return mii_link_ok(&rp->mii_if); ++ return phy_ethtool_sset(rp->phydev, cmd); + } + + static const struct ethtool_ops netdev_ethtool_ops = { + .get_drvinfo = netdev_get_drvinfo, + .get_settings = netdev_get_settings, + .set_settings = netdev_set_settings, +- .get_link = netdev_get_link, ++ .get_link = ethtool_op_get_link, + }; + + static const struct net_device_ops r6040_netdev_ops = { +@@ -1072,6 +958,86 @@ + #endif + }; + ++static void r6040_adjust_link(struct net_device *dev) ++{ ++ struct r6040_private *lp = netdev_priv(dev); ++ struct phy_device *phydev = lp->phydev; ++ int status_changed = 0; ++ void __iomem *ioaddr = lp->base; ++ ++ BUG_ON (!phydev); ++ ++ if (lp->old_link != phydev->link) { ++ status_changed = 1; ++ lp->old_link = phydev->link; ++ } ++ ++ /* reflect duplex change */ ++ if (phydev->link && (lp->old_duplex != phydev->duplex)) { ++ lp->mcr0 |= (phydev->duplex == DUPLEX_FULL ? 0x8000 : 0); ++ iowrite16(lp->mcr0, ioaddr); ++ ++ status_changed = 1; ++ lp->old_duplex = phydev->duplex; ++ } ++ ++ if (status_changed) { ++ pr_info("%s: link %s", dev->name, phydev->link ? ++ "UP" : "DOWN"); ++ if (phydev->link) ++ pr_cont(" - %d/%s", phydev->speed, ++ DUPLEX_FULL == phydev->duplex ? "full" : "half"); ++ pr_cont("\n"); ++ } ++} ++ ++static int r6040_mii_probe(struct net_device *dev) ++{ ++ struct r6040_private *lp = netdev_priv(dev); ++ struct phy_device *phydev = NULL; ++ int phy_addr; ++ ++ for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) { ++ if (lp->mii_bus->phy_map[phy_addr]) { ++ phydev = lp->mii_bus->phy_map[phy_addr]; ++ break; ++ } ++ } ++ ++ if (!phydev) { ++ printk(KERN_ERR DRV_NAME "no PHY found\n"); ++ return -ENODEV; ++ } ++ ++ phydev = phy_connect(dev, dev_name(&phydev->dev), &r6040_adjust_link, ++ 0, PHY_INTERFACE_MODE_MII); ++ ++ if (IS_ERR(phydev)) { ++ printk(KERN_ERR DRV_NAME "could not attach to PHY\n"); ++ return PTR_ERR(phydev); ++ } ++ ++ /* mask with MAC supported features */ ++ phydev->supported &= (SUPPORTED_10baseT_Half ++ | SUPPORTED_10baseT_Full ++ | SUPPORTED_100baseT_Half ++ | SUPPORTED_100baseT_Full ++ | SUPPORTED_Autoneg ++ | SUPPORTED_MII ++ | SUPPORTED_TP); ++ ++ phydev->advertising = phydev->supported; ++ lp->phydev = phydev; ++ lp->old_link = 0; ++ lp->old_duplex = -1; ++ ++ printk(KERN_INFO "%s: attached PHY driver [%s] " ++ "(mii_bus:phy_addr=%s)\n", dev->name, ++ phydev->drv->name, dev_name(&phydev->dev)); ++ ++ return 0; ++} ++ + static int __devinit r6040_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) + { +@@ -1082,6 +1048,7 @@ + static int card_idx = -1; + int bar = 0; + u16 *adrp; ++ int i; + + printk("%s\n", version); + +@@ -1169,7 +1136,6 @@ + /* Init RDC private data */ + lp->mcr0 = 0x1002; + lp->phy_addr = phy_table[card_idx]; +- lp->switch_sig = 0; + + /* The RDC-specific entries in the device structure. */ + dev->netdev_ops = &r6040_netdev_ops; +@@ -1177,28 +1143,61 @@ + dev->watchdog_timeo = TX_TIMEOUT; + + netif_napi_add(dev, &lp->napi, r6040_poll, 64); +- lp->mii_if.dev = dev; +- lp->mii_if.mdio_read = r6040_mdio_read; +- lp->mii_if.mdio_write = r6040_mdio_write; +- lp->mii_if.phy_id = lp->phy_addr; +- lp->mii_if.phy_id_mask = 0x1f; +- lp->mii_if.reg_num_mask = 0x1f; ++ ++ lp->mii_bus = mdiobus_alloc(); ++ if (!lp->mii_bus) { ++ printk(KERN_ERR DRV_NAME ": mdiobus_alloc failed\n"); ++ goto err_out_unmap; ++ } ++ ++ lp->mii_bus->priv = dev; ++ lp->mii_bus->read = r6040_mdiobus_read; ++ lp->mii_bus->write = r6040_mdiobus_write; ++ lp->mii_bus->reset = r6040_mdiobus_reset; ++ lp->mii_bus->name = "r6040_eth_mii"; ++ snprintf(lp->mii_bus->id, MII_BUS_ID_SIZE, "%x", card_idx); ++ lp->mii_bus->irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL); ++ if (!lp->mii_bus->irq) { ++ printk(KERN_ERR DRV_NAME ": allocation failed\n"); ++ goto err_out_mdio; ++ } ++ ++ for (i = 0; i < PHY_MAX_ADDR; i++) ++ lp->mii_bus->irq[i] = PHY_POLL; ++ ++ err = mdiobus_register(lp->mii_bus); ++ if (err) { ++ printk(KERN_ERR DRV_NAME ": failed to register MII bus\n"); ++ goto err_out_mdio_irq; ++ } ++ ++ err = r6040_mii_probe(dev); ++ if (err) { ++ printk(KERN_ERR DRV_NAME ": failed to probe MII bus\n"); ++ goto err_out_mdio_unregister; ++ } + + /* Check the vendor ID on the PHY, if 0xffff assume none attached */ + if (r6040_phy_read(ioaddr, lp->phy_addr, 2) == 0xffff) { + printk(KERN_ERR DRV_NAME ": Failed to detect an attached PHY\n"); + err = -ENODEV; +- goto err_out_unmap; ++ goto err_out_mdio_unregister; + } + + /* Register net device. After this dev->name assign */ + err = register_netdev(dev); + if (err) { + printk(KERN_ERR DRV_NAME ": Failed to register net device\n"); +- goto err_out_unmap; ++ goto err_out_mdio_unregister; + } + return 0; + ++err_out_mdio_unregister: ++ mdiobus_unregister(lp->mii_bus); ++err_out_mdio_irq: ++ kfree(lp->mii_bus->irq); ++err_out_mdio: ++ mdiobus_free(lp->mii_bus); + err_out_unmap: + pci_iounmap(pdev, ioaddr); + err_out_free_res: +@@ -1212,8 +1211,12 @@ + static void __devexit r6040_remove_one(struct pci_dev *pdev) + { + struct net_device *dev = pci_get_drvdata(pdev); ++ struct r6040_private *lp = netdev_priv(dev); + + unregister_netdev(dev); ++ mdiobus_unregister(lp->mii_bus); ++ kfree(lp->mii_bus->irq); ++ mdiobus_free(lp->mii_bus); + pci_release_regions(pdev); + free_netdev(dev); + pci_disable_device(pdev); diff --git a/target/linux/rdc/profiles/ar525w.mk b/target/linux/rdc/profiles/ar525w.mk index c2faee9da6..e86f47a49a 100644 --- a/target/linux/rdc/profiles/ar525w.mk +++ b/target/linux/rdc/profiles/ar525w.mk @@ -6,7 +6,7 @@ # define Profile/ar525w - NAME:=Airlink AR525W - PACKAGES:=kmod-rt61-pci + NAME:=Airlink AR525W + PACKAGES:=kmod-rt61-pci kmod-switch-ip175c endef $(eval $(call Profile,ar525w)) |