diff options
Diffstat (limited to 'package/boot/uboot-xburst/files/cpu/mips/jz4740_nand.c')
| -rw-r--r-- | package/boot/uboot-xburst/files/cpu/mips/jz4740_nand.c | 199 |
1 files changed, 0 insertions, 199 deletions
diff --git a/package/boot/uboot-xburst/files/cpu/mips/jz4740_nand.c b/package/boot/uboot-xburst/files/cpu/mips/jz4740_nand.c deleted file mode 100644 index 7877194f14..0000000000 --- a/package/boot/uboot-xburst/files/cpu/mips/jz4740_nand.c +++ /dev/null @@ -1,199 +0,0 @@ -/* - * Platform independend driver for JZ4740. - * - * Copyright (c) 2007 Ingenic Semiconductor Inc. - * Author: <jlwei@ingenic.cn> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - */ -#include <common.h> - -#if defined(CONFIG_CMD_NAND) && defined(CONFIG_JZ4740) - -#include <nand.h> -#include <asm/jz4740.h> -#include <asm/io.h> - -#define PAR_SIZE 9 -#define __nand_ecc_enable() (REG_EMC_NFECR = EMC_NFECR_ECCE | EMC_NFECR_ERST ) -#define __nand_ecc_disable() (REG_EMC_NFECR &= ~EMC_NFECR_ECCE) - -#define __nand_select_rs_ecc() (REG_EMC_NFECR |= EMC_NFECR_RS) - -#define __nand_rs_ecc_encoding() (REG_EMC_NFECR |= EMC_NFECR_RS_ENCODING) -#define __nand_rs_ecc_decoding() (REG_EMC_NFECR |= EMC_NFECR_RS_DECODING) -#define __nand_ecc_encode_sync() while (!(REG_EMC_NFINTS & EMC_NFINTS_ENCF)) -#define __nand_ecc_decode_sync() while (!(REG_EMC_NFINTS & EMC_NFINTS_DECF)) - -static void jz_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl) -{ - struct nand_chip *this = mtd->priv; - unsigned long nandaddr = (unsigned long)this->IO_ADDR_W; - - if (ctrl & NAND_CTRL_CHANGE) { - /* Change this to use I/O accessors. */ - if (ctrl & NAND_NCE) - REG_EMC_NFCSR |= EMC_NFCSR_NFCE1; - else - REG_EMC_NFCSR &= ~EMC_NFCSR_NFCE1; - } - - if (cmd == NAND_CMD_NONE) - return; - - if (ctrl & NAND_CLE) - nandaddr |= 0x00008000; - else /* must be ALE */ - nandaddr |= 0x00010000; - - writeb(cmd, (uint8_t *)nandaddr); -} - -static int jz_device_ready(struct mtd_info *mtd) -{ - int ready; - udelay(20); /* FIXME: add 20us delay */ - ready = (REG_GPIO_PXPIN(2) & 0x40000000) ? 1 : 0; - return ready; -} - -/* - * EMC setup - */ -static void jz_device_setup(void) -{ - /* Set NFE bit */ - REG_EMC_NFCSR |= EMC_NFCSR_NFE1; - REG_EMC_SMCR1 = 0x094c4400; - /* REG_EMC_SMCR3 = 0x04444400; */ -} - -void board_nand_select_device(struct nand_chip *nand, int chip) -{ - /* - * Don't use "chip" to address the NAND device, - * generate the cs from the address where it is encoded. - */ -} - -static int jzsoc_nand_calculate_rs_ecc(struct mtd_info* mtd, const u_char* dat, - u_char* ecc_code) -{ - volatile u8 *paraddr = (volatile u8 *)EMC_NFPAR0; - short i; - - __nand_ecc_encode_sync() - __nand_ecc_disable(); - - for(i = 0; i < PAR_SIZE; i++) - ecc_code[i] = *paraddr++; - - return 0; -} - -static void jzsoc_nand_enable_rs_hwecc(struct mtd_info* mtd, int mode) -{ - __nand_ecc_enable(); - __nand_select_rs_ecc(); - - REG_EMC_NFINTS = 0x0; - if (NAND_ECC_READ == mode){ - __nand_rs_ecc_decoding(); - } - if (NAND_ECC_WRITE == mode){ - __nand_rs_ecc_encoding(); - } -} - -/* Correct 1~9-bit errors in 512-bytes data */ -static void jzsoc_rs_correct(unsigned char *dat, int idx, int mask) -{ - int i; - - idx--; - - i = idx + (idx >> 3); - if (i >= 512) - return; - - mask <<= (idx & 0x7); - - dat[i] ^= mask & 0xff; - if (i < 511) - dat[i+1] ^= (mask >> 8) & 0xff; -} - -static int jzsoc_nand_rs_correct_data(struct mtd_info *mtd, u_char *dat, - u_char *read_ecc, u_char *calc_ecc) -{ - volatile u8 *paraddr = (volatile u8 *)EMC_NFPAR0; - short k; - u32 stat; - /* Set PAR values */ - - for (k = 0; k < PAR_SIZE; k++) { - *paraddr++ = read_ecc[k]; - } - - /* Set PRDY */ - REG_EMC_NFECR |= EMC_NFECR_PRDY; - - /* Wait for completion */ - __nand_ecc_decode_sync(); - __nand_ecc_disable(); - - /* Check decoding */ - stat = REG_EMC_NFINTS; - if (stat & EMC_NFINTS_ERR) { - if (stat & EMC_NFINTS_UNCOR) { - printk("Uncorrectable error occurred\n"); - return -1; - } - else { - u32 errcnt = (stat & EMC_NFINTS_ERRCNT_MASK) >> EMC_NFINTS_ERRCNT_BIT; - switch (errcnt) { - case 4: - jzsoc_rs_correct(dat, (REG_EMC_NFERR3 & EMC_NFERR_INDEX_MASK) >> EMC_NFERR_INDEX_BIT, (REG_EMC_NFERR3 & EMC_NFERR_MASK_MASK) >> EMC_NFERR_MASK_BIT); - case 3: - jzsoc_rs_correct(dat, (REG_EMC_NFERR2 & EMC_NFERR_INDEX_MASK) >> EMC_NFERR_INDEX_BIT, (REG_EMC_NFERR2 & EMC_NFERR_MASK_MASK) >> EMC_NFERR_MASK_BIT); - case 2: - jzsoc_rs_correct(dat, (REG_EMC_NFERR1 & EMC_NFERR_INDEX_MASK) >> EMC_NFERR_INDEX_BIT, (REG_EMC_NFERR1 & EMC_NFERR_MASK_MASK) >> EMC_NFERR_MASK_BIT); - case 1: - jzsoc_rs_correct(dat, (REG_EMC_NFERR0 & EMC_NFERR_INDEX_MASK) >> EMC_NFERR_INDEX_BIT, (REG_EMC_NFERR0 & EMC_NFERR_MASK_MASK) >> EMC_NFERR_MASK_BIT); - return 0; - default: - break; - } - } - } - /* no error need to be correct */ - return 0; -} - -/* - * Main initialization routine - */ -int board_nand_init(struct nand_chip *nand) -{ - jz_device_setup(); - - nand->cmd_ctrl = jz_hwcontrol; - nand->dev_ready = jz_device_ready; - - /* FIXME: should use NAND_ECC_SOFT */ - nand->ecc.hwctl = jzsoc_nand_enable_rs_hwecc; - nand->ecc.correct = jzsoc_nand_rs_correct_data; - nand->ecc.calculate = jzsoc_nand_calculate_rs_ecc; - nand->ecc.mode = NAND_ECC_HW; - nand->ecc.size = 512; - nand->ecc.bytes = 9; - - /* 20 us command delay time */ - nand->chip_delay = 20; - - return 0; -} -#endif /* (CONFIG_SYS_CMD_NAND) */ |