diff options
Diffstat (limited to 'target/linux/imx6/patches-3.10/0026-regulator-pfuze100-Fix-n_voltages-setting-for-SW2-SW.patch')
-rw-r--r-- | target/linux/imx6/patches-3.10/0026-regulator-pfuze100-Fix-n_voltages-setting-for-SW2-SW.patch | 67 |
1 files changed, 0 insertions, 67 deletions
diff --git a/target/linux/imx6/patches-3.10/0026-regulator-pfuze100-Fix-n_voltages-setting-for-SW2-SW.patch b/target/linux/imx6/patches-3.10/0026-regulator-pfuze100-Fix-n_voltages-setting-for-SW2-SW.patch deleted file mode 100644 index 026eccec4d..0000000000 --- a/target/linux/imx6/patches-3.10/0026-regulator-pfuze100-Fix-n_voltages-setting-for-SW2-SW.patch +++ /dev/null @@ -1,67 +0,0 @@ -From: Axel Lin <axel.lin@ingics.com> -Subject: [PATCH] regulator: pfuze100: Fix n_voltages setting for SW2~SW4 with - high bit set - -Current code adjust min_uV and uV_step but missed adjusting the n_voltages -setting. - -When BIT6 is clear: - n_voltages = (1975000 - 400000) / 25000 + 1 = 64 -When BIT6 is set: - n_voltages = (3300000 - 800000) / 50000 + 1 = 51 - -The n_voltages needs update because when BIT6 is set 0x73 ~ 0x7f are reserved. -When using regulator_list_voltage_linear, the n_voltages does matter here -because wrong n_voltages setting make the equation return wrong result. -e.g. if selector is 63, regulator_list_voltage_linear returns - 800000 + (50000 * 63) = 4000000 - It should return -EINVAL if the selector is in the range of 51 ~ 63. - -Signed-off-by: Axel Lin <axel.lin@ingics.com> -Signed-off-by: Mark Brown <broonie@linaro.org> ---- - drivers/regulator/pfuze100-regulator.c | 16 ++++++++-------- - 1 file changed, 8 insertions(+), 8 deletions(-) - ---- a/drivers/regulator/pfuze100-regulator.c -+++ b/drivers/regulator/pfuze100-regulator.c -@@ -388,8 +388,11 @@ static int pfuze100_regulator_probe(stru - - for (i = 0; i < PFUZE100_MAX_REGULATOR; i++) { - struct regulator_init_data *init_data; -+ struct regulator_desc *desc; - int val; - -+ desc = &pfuze_chip->regulator_descs[i].desc; -+ - if (pdata) - init_data = pdata->init_data[i]; - else -@@ -397,13 +400,11 @@ static int pfuze100_regulator_probe(stru - - /* SW2~SW4 high bit check and modify the voltage value table */ - if (i > PFUZE100_SW1C && i < PFUZE100_SWBST) { -- regmap_read(pfuze_chip->regmap, PFUZE100_SW2VOL + -- (i - PFUZE100_SW2) * 7, &val); -+ regmap_read(pfuze_chip->regmap, desc->vsel_reg, &val); - if (val & 0x40) { -- pfuze_chip->regulator_descs[i].desc.min_uV -- = 800000; -- pfuze_chip->regulator_descs[i].desc.uV_step -- = 50000; -+ desc->min_uV = 800000; -+ desc->uV_step = 50000; -+ desc->n_voltages = 51; - } - } - -@@ -412,8 +413,7 @@ static int pfuze100_regulator_probe(stru - config.driver_data = pfuze_chip; - config.of_node = match_of_node(i); - -- pfuze_chip->regulators[i] = regulator_register(&pfuze_chip -- ->regulator_descs[i].desc, &config); -+ pfuze_chip->regulators[i] = regulator_register(desc, &config); - if (IS_ERR(pfuze_chip->regulators[i])) { - dev_err(&client->dev, "register regulator%s failed\n", - pfuze100_regulators[i].desc.name); |