diff options
Diffstat (limited to 'target/linux/ipq806x/patches-4.1/112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch')
| -rw-r--r-- | target/linux/ipq806x/patches-4.1/112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch | 128 |
1 files changed, 52 insertions, 76 deletions
diff --git a/target/linux/ipq806x/patches-4.1/112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch b/target/linux/ipq806x/patches-4.1/112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch index d80bc8f209..6ccb7d8080 100644 --- a/target/linux/ipq806x/patches-4.1/112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch +++ b/target/linux/ipq806x/patches-4.1/112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch @@ -15,59 +15,59 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> --- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts +++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts -@@ -35,6 +35,24 @@ - bias-disable; - }; - -+ pcie0_pins: pcie0_pinmux { -+ mux { -+ pins = "gpio3"; -+ function = "pcie1_rst"; -+ drive-strength = <12>; -+ bias-disable; -+ }; -+ }; -+ -+ pcie1_pins: pcie1_pinmux { -+ mux { -+ pins = "gpio48"; -+ function = "pcie2_rst"; -+ drive-strength = <12>; -+ bias-disable; -+ }; -+ }; -+ - spi_pins: spi_pins { - mux { - pins = "gpio18", "gpio19", "gpio21"; -@@ -91,5 +109,21 @@ +@@ -91,5 +91,15 @@ sata@29000000 { status = "ok"; }; + + pcie0: pci@1b500000 { + status = "ok"; -+ reset-gpio = <&qcom_pinmux 3 0>; -+ pinctrl-0 = <&pcie0_pins>; -+ pinctrl-names = "default"; + phy-tx0-term-offset = <7>; + }; + + pcie1: pci@1b700000 { + status = "ok"; -+ reset-gpio = <&qcom_pinmux 48 0>; -+ pinctrl-0 = <&pcie1_pins>; -+ pinctrl-names = "default"; + phy-tx0-term-offset = <7>; + }; }; }; --- a/arch/arm/boot/dts/qcom-ipq8064-db149.dts +++ b/arch/arm/boot/dts/qcom-ipq8064-db149.dts -@@ -30,6 +30,33 @@ - bias-disable; - }; +@@ -128,5 +128,17 @@ + usb30@1 { + status = "ok"; + }; ++ ++ pcie0: pci@1b500000 { ++ status = "ok"; ++ }; ++ ++ pcie1: pci@1b700000 { ++ status = "ok"; ++ }; ++ ++ pcie2: pci@1b900000 { ++ status = "ok"; ++ }; + }; + }; +--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi +@@ -4,6 +4,9 @@ + #include <dt-bindings/clock/qcom,gcc-ipq806x.h> + #include <dt-bindings/clock/qcom,lcc-ipq806x.h> + #include <dt-bindings/soc/qcom,gsbi.h> ++#include <dt-bindings/reset/qcom,gcc-ipq806x.h> ++#include <dt-bindings/interrupt-controller/arm-gic.h> ++#include <dt-bindings/gpio/gpio.h> + / { + model = "Qualcomm IPQ8064"; +@@ -99,6 +102,33 @@ + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 16 0x4>; ++ + pcie0_pins: pcie0_pinmux { + mux { + pins = "gpio3"; @@ -94,49 +94,10 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> + bias-disable; + }; + }; -+ - spi_pins: spi_pins { - mux { - pins = "gpio18", "gpio19", "gpio21"; -@@ -128,5 +155,26 @@ - usb30@1 { - status = "ok"; }; -+ -+ pcie0: pci@1b500000 { -+ status = "ok"; -+ reset-gpio = <&qcom_pinmux 3 0>; -+ pinctrl-0 = <&pcie0_pins>; -+ pinctrl-names = "default"; -+ }; -+ -+ pcie1: pci@1b700000 { -+ status = "ok"; -+ reset-gpio = <&qcom_pinmux 48 0>; -+ pinctrl-0 = <&pcie1_pins>; -+ pinctrl-names = "default"; -+ }; -+ -+ pcie2: pci@1b900000 { -+ status = "ok"; -+ reset-gpio = <&qcom_pinmux 63 0>; -+ pinctrl-0 = <&pcie2_pins>; -+ pinctrl-names = "default"; -+ }; - }; - }; ---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi -@@ -4,6 +4,8 @@ - #include <dt-bindings/clock/qcom,gcc-ipq806x.h> - #include <dt-bindings/clock/qcom,lcc-ipq806x.h> - #include <dt-bindings/soc/qcom,gsbi.h> -+#include <dt-bindings/reset/qcom,gcc-ipq806x.h> -+#include <dt-bindings/interrupt-controller/arm-gic.h> - / { - model = "Qualcomm IPQ8064"; -@@ -333,6 +335,129 @@ + intc: interrupt-controller@2000000 { +@@ -333,6 +363,144 @@ compatible = "syscon"; reg = <0x01200600 0x100>; }; @@ -179,6 +140,11 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> + <&gcc PCIE_PHY_RESET>; + reset-names = "axi", "ahb", "por", "pci", "phy"; + ++ pinctrl-0 = <&pcie0_pins>; ++ pinctrl-names = "default"; ++ ++ perst-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>; ++ + status = "disabled"; + }; + @@ -220,6 +186,11 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> + <&gcc PCIE_1_PHY_RESET>; + reset-names = "axi", "ahb", "por", "pci", "phy"; + ++ pinctrl-0 = <&pcie1_pins>; ++ pinctrl-names = "default"; ++ ++ perst-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>; ++ + status = "disabled"; + }; + @@ -261,6 +232,11 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> + <&gcc PCIE_2_PHY_RESET>; + reset-names = "axi", "ahb", "por", "pci", "phy"; + ++ pinctrl-0 = <&pcie2_pins>; ++ pinctrl-names = "default"; ++ ++ perst-gpio = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>; ++ + status = "disabled"; + }; }; |