summaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
Diffstat (limited to 'target')
-rw-r--r--target/linux/bcm53xx/config-3.18287
-rw-r--r--target/linux/bcm53xx/patches-3.18/003-mtd-spi-nor-from-3.19.patch662
-rw-r--r--target/linux/bcm53xx/patches-3.18/004-mtd-spi-nor-from-3.20.patch116
-rw-r--r--target/linux/bcm53xx/patches-3.18/043-ARM-BCM5301X-fix-early-serial-console.patch34
-rw-r--r--target/linux/bcm53xx/patches-3.18/044-ARM-BCM5301X-Add-Broadcom-s-bus-axi-to-the-DTS-file.patch43
-rw-r--r--target/linux/bcm53xx/patches-3.18/045-ARM-BCM5301X-Add-LEDs-for-Netgear-R6250-V1.patch54
-rw-r--r--target/linux/bcm53xx/patches-3.18/046-ARM-BCM5301X-Add-IRQs-to-Broadcom-s-bus-axi-in-DTS-f.patch58
-rw-r--r--target/linux/bcm53xx/patches-3.18/047-ARM-BCM5301X-Add-buttons-for-Netgear-R6250.patch57
-rw-r--r--target/linux/bcm53xx/patches-3.18/048-ARM-BCM5301X-Add-DT-for-Netgear-R6300-V2.patch116
-rw-r--r--target/linux/bcm53xx/patches-3.18/049-ARM-BCM5301X-Add-DT-for-Buffalo-WZR-1750DHP.patch93
-rw-r--r--target/linux/bcm53xx/patches-3.18/050-ARM-BCM5301X-Add-DT-for-Asus-RT-N18U.patch140
-rw-r--r--target/linux/bcm53xx/patches-3.18/051-ARM-BCM5301X-Add-DT-for-Buffalo-WZR-600DHP2.patch88
-rw-r--r--target/linux/bcm53xx/patches-3.18/052-ARM-BCM5301X-Add-DT-for-Luxul-XWC-1000.patch89
-rw-r--r--target/linux/bcm53xx/patches-3.18/053-ARM-BCM5301X-Drop-unused-poll-interval-from-gpio-key.patch71
-rw-r--r--target/linux/bcm53xx/patches-3.18/054-ARM-BCM5301X-Add-LEDs-for-Buffalo-devices.patch167
-rw-r--r--target/linux/bcm53xx/patches-3.18/055-ARM-BCM5301X-Add-DT-for-Buffalo-WZR-900DHP.patch68
-rw-r--r--target/linux/bcm53xx/patches-3.18/056-ARM-BCM5301X-Add-DT-for-Netgear-R8000.patch109
-rw-r--r--target/linux/bcm53xx/patches-3.18/057-ARM-BCM5301X-Fix-default-state-of-power-LEDs-on-Netg.patch35
-rw-r--r--target/linux/bcm53xx/patches-3.18/058-ARM-BCM5301X-Add-USB-LED-for-Buffalo-WZR-1750DHP.patch26
-rw-r--r--target/linux/bcm53xx/patches-3.18/059-ARM-BCM5301X-Add-DT-for-Buffalo-WXR-1900DHP.patch157
-rw-r--r--target/linux/bcm53xx/patches-3.18/060-ARM-BCM5301X-Add-DT-for-SmartRG-SR400ac.patch148
-rw-r--r--target/linux/bcm53xx/patches-3.18/061-ARM-BCM5301X-Add-DT-for-Asus-RT-AC68U.patch112
-rw-r--r--target/linux/bcm53xx/patches-3.18/062-ARM-BCM5301X-Add-DT-for-Asus-RT-AC56U.patch125
-rw-r--r--target/linux/bcm53xx/patches-3.18/063-ARM-BCM5301X-Ignore-another-BCM4709-specific-fault-c.patch41
-rw-r--r--target/linux/bcm53xx/patches-3.18/064-ARM-BCM5301X-add-NAND-flash-chip-description.patch210
-rw-r--r--target/linux/bcm53xx/patches-3.18/065-ARM-BCM5301X-add-IRQ-numbers-for-PCIe-controller.patch48
-rw-r--r--target/linux/bcm53xx/patches-3.18/066-ARM-BCM5301X-Add-DT-for-Asus-RT-AC87U.patch95
-rw-r--r--target/linux/bcm53xx/patches-3.18/067-ARM-BCM5301X-Enable-UART0-on-tested-devices.patch83
-rw-r--r--target/linux/bcm53xx/patches-3.18/068-ARM-BCM5301X-Add-profiling-support.patch25
-rw-r--r--target/linux/bcm53xx/patches-3.18/069-ARM-BCM5301X-Add-DT-for-Netgear-R7000.patch128
-rw-r--r--target/linux/bcm53xx/patches-3.18/080-watchdog-bcm47xx_wdt.c-add-restart-handler-support.patch74
-rw-r--r--target/linux/bcm53xx/patches-3.18/081-watchdog-bcm47xx_wdt.c-allow-enabling-on-BCM5301X-ar.patch29
-rw-r--r--target/linux/bcm53xx/patches-3.18/110-firmware-backport-NVRAM-driver.patch82
-rw-r--r--target/linux/bcm53xx/patches-3.18/112-bcm53xx-sprom-add-sprom-driver.patch69
-rw-r--r--target/linux/bcm53xx/patches-3.18/131-ARM-BCM5301X-Implement-SMP-support.patch314
-rw-r--r--target/linux/bcm53xx/patches-3.18/150-pci-do-not-probe-too-early.patch29
-rw-r--r--target/linux/bcm53xx/patches-3.18/170-pcie2-bcma-add-new-PCIe2-driver-for-bcma.patch535
-rw-r--r--target/linux/bcm53xx/patches-3.18/180-USB-bcma-remove-chip-id-check.patch34
-rw-r--r--target/linux/bcm53xx/patches-3.18/181-USB-bcma-replace-numbers-with-constants.patch24
-rw-r--r--target/linux/bcm53xx/patches-3.18/182-USB-bcma-use-devm_kzalloc.patch47
-rw-r--r--target/linux/bcm53xx/patches-3.18/183-USB-bcma-fix-error-handling-in-bcma_hcd_create_pdev.patch33
-rw-r--r--target/linux/bcm53xx/patches-3.18/184-USB-bcma-add-bcm53xx-support.patch133
-rw-r--r--target/linux/bcm53xx/patches-3.18/185-USB-bcma-add-support-for-controlling-bus-power-throu.patch82
-rw-r--r--target/linux/bcm53xx/patches-3.18/300-ARM-BCM5301X-Disable-MMU-and-Dcache-for-decompression.patch195
-rw-r--r--target/linux/bcm53xx/patches-3.18/301-ARM-BCM5301X-Add-SPROM.patch26
-rw-r--r--target/linux/bcm53xx/patches-3.18/305-ARM-BCM53XX-set-customized-AUXCTL.patch30
-rw-r--r--target/linux/bcm53xx/patches-3.18/320-ARM-BCM5301X-Add-Buffalo-WXR-1900DHP-clock-and-USB-p.patch41
-rw-r--r--target/linux/bcm53xx/patches-3.18/321-ARM-BCM5301X-Set-vcc-gpio-for-USB-controllers.patch63
-rw-r--r--target/linux/bcm53xx/patches-3.18/330-ARM-BCM5310X-Enable-earlyprintk-on-tested-devices.patch159
-rw-r--r--target/linux/bcm53xx/patches-3.18/331-ARM-BCM5301X-Specify-RAM-on-devices-by-including-HIG.patch173
-rw-r--r--target/linux/bcm53xx/patches-3.18/332-ARM-BCM5301X-Add-power-button-for-Buffalo-WZR-1750DHP.patch20
-rw-r--r--target/linux/bcm53xx/patches-3.18/351-ARM-BCM5301X-Enable-ChipCommon-UART-on-untested-devi.patch111
-rw-r--r--target/linux/bcm53xx/patches-3.18/352-ARM-BCM5301X-Add-back-Luxul-XWC-1000-NAND-flash-layo.patch37
-rw-r--r--target/linux/bcm53xx/patches-3.18/400-mtd-bcm47xxpart-scan-whole-flash-on-ARCH_BCM_5301X.patch31
-rw-r--r--target/linux/bcm53xx/patches-3.18/404-mtd-bcm53xxspiflash-new-driver-for-SPI-flahes-on-Bro.patch19
-rw-r--r--target/linux/bcm53xx/patches-3.18/420-mtd-bcm5301x_nand.patch1608
-rw-r--r--target/linux/bcm53xx/patches-3.18/500-UBI-Detect-EOF-mark-and-erase-all-remaining-blocks.patch59
-rw-r--r--target/linux/bcm53xx/patches-3.18/700-bgmac-add-support-for-the-3rd-bus-core-device.patch63
-rw-r--r--target/linux/bcm53xx/patches-3.18/710-b53-add-hacky-CPU-port-fixes-for-devices-not-using-p.patch35
-rw-r--r--target/linux/bcm53xx/patches-3.18/800-bcma-use-two-different-initcalls-if-built-in.patch65
-rw-r--r--target/linux/bcm53xx/patches-3.18/810-USB-bcma-make-helper-creating-platform-dev-more-gene.patch73
-rw-r--r--target/linux/bcm53xx/patches-3.18/811-USB-bcma-use-separated-function-for-USB-2.0-initiali.patch102
-rw-r--r--target/linux/bcm53xx/patches-3.18/812-USB-bcma-add-USB-3.0-support.patch274
-rw-r--r--target/linux/bcm53xx/patches-3.18/813-USB-bcma-fix-setting-VCC-GPIO-value.patch45
-rw-r--r--target/linux/bcm53xx/patches-3.18/820-xhci-add-Broadcom-specific-fake-doorbell.patch94
-rw-r--r--target/linux/bcm53xx/patches-3.18/901-mtd-bcm47xxpart-workaround-for-Asus-RT-AC87U-asus-pa.patch42
66 files changed, 0 insertions, 8335 deletions
diff --git a/target/linux/bcm53xx/config-3.18 b/target/linux/bcm53xx/config-3.18
deleted file mode 100644
index 424760ded0..0000000000
--- a/target/linux/bcm53xx/config-3.18
+++ /dev/null
@@ -1,287 +0,0 @@
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_ARCH_BCM=y
-CONFIG_ARCH_BCM_5301X=y
-# CONFIG_ARCH_BCM_63XX is not set
-# CONFIG_ARCH_BCM_MOBILE is not set
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
-# CONFIG_ARCH_BRCMSTB is not set
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
-CONFIG_ARCH_HAS_SG_CHAIN=y
-CONFIG_ARCH_HAS_TICK_BROADCAST=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-# CONFIG_ARCH_MULTI_CPU_AUTO is not set
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_ARCH_NR_GPIO=0
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
-CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_ARM=y
-CONFIG_ARM_APPENDED_DTB=y
-# CONFIG_ARM_ATAG_DTB_COMPAT is not set
-# CONFIG_ARM_CPU_SUSPEND is not set
-CONFIG_ARM_ERRATA_754322=y
-CONFIG_ARM_ERRATA_764369=y
-CONFIG_ARM_ERRATA_775420=y
-CONFIG_ARM_ERRATA_798181=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_GLOBAL_TIMER=y
-CONFIG_ARM_HAS_SG_CHAIN=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-# CONFIG_ARM_LPAE is not set
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-CONFIG_ARM_VIRT_EXT=y
-CONFIG_ATAGS=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_B53=y
-# CONFIG_B53_MMAP_DRIVER is not set
-# CONFIG_B53_PHY_DRIVER is not set
-CONFIG_B53_SRAB_DRIVER=y
-CONFIG_BCM47XX_NVRAM=y
-CONFIG_BCM47XX_SPROM=y
-CONFIG_BCM47XX_WDT=y
-CONFIG_BCMA=y
-CONFIG_BCMA_BLOCKIO=y
-CONFIG_BCMA_DEBUG=y
-CONFIG_BCMA_DRIVER_GMAC_CMN=y
-CONFIG_BCMA_DRIVER_GPIO=y
-CONFIG_BCMA_DRIVER_PCI=y
-CONFIG_BCMA_HOST_PCI=y
-CONFIG_BCMA_HOST_PCI_POSSIBLE=y
-CONFIG_BCMA_HOST_SOC=y
-CONFIG_BGMAC=y
-CONFIG_BOUNCE=y
-CONFIG_CACHE_L2X0=y
-CONFIG_CACHE_PL310=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK=y
-CONFIG_CLKSRC_OF=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_COMMON_CLK=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_HAS_ASID=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_XZ=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_BCM_5301X=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
-CONFIG_DEBUG_UART_8250=y
-# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set
-CONFIG_DEBUG_UART_8250_SHIFT=0
-CONFIG_DEBUG_UART_PHYS=0x18000300
-# CONFIG_DEBUG_UART_PL01X is not set
-CONFIG_DEBUG_UART_VIRT=0xf1000300
-CONFIG_DEBUG_UNCOMPRESS=y
-CONFIG_DEBUG_USER=y
-CONFIG_DTC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_FIXED_PHY=y
-CONFIG_FRAME_POINTER=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_74X164=y
-CONFIG_GPIO_DEVRES=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-CONFIG_HAVE_ARCH_AUDITSYSCALL=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_ARM_SCU=y
-CONFIG_HAVE_ARM_TWD=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_BPF_JIT=y
-CONFIG_HAVE_CC_STACKPROTECTOR=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZ4=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_HAVE_KERNEL_XZ=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_SMP=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_UID16=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HIGHMEM=y
-# CONFIG_HIGHPTE is not set
-CONFIG_HZ_FIXED=0
-CONFIG_HZ_PERIODIC=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IOMMU_HELPER=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_LIBFDT=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MDIO_BOARDINFO=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_MIGHT_HAVE_PCI=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MTD_BCM47XX_PARTS=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_BCM=y
-CONFIG_MTD_NAND_ECC=y
-# CONFIG_MTD_PHYSMAP_OF is not set
-CONFIG_MTD_SPI_BCM53XXSPIFLASH=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-CONFIG_MTD_UBI_BLOCK=y
-# CONFIG_MTD_UBI_FASTMAP is not set
-# CONFIG_MTD_UBI_GLUEBI is not set
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MULTI_IRQ_HANDLER=y
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NO_BOOTMEM=y
-CONFIG_NR_CPUS=4
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_ADDRESS_PCI=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_MTD=y
-CONFIG_OF_NET=y
-CONFIG_OF_PCI=y
-CONFIG_OF_PCI_IRQ=y
-CONFIG_OF_RESERVED_MEM=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_OUTER_CACHE=y
-CONFIG_OUTER_CACHE_SYNC=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PCI=y
-CONFIG_PCI_BCM5301X=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PHYLIB=y
-# CONFIG_PL310_ERRATA_588369 is not set
-CONFIG_PL310_ERRATA_727915=y
-CONFIG_PL310_ERRATA_753970=y
-CONFIG_PL310_ERRATA_769419=y
-# CONFIG_PREEMPT_RCU is not set
-CONFIG_RCU_STALL_COMMON=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_SCHED_HRTICK=y
-# CONFIG_SCSI_DMA is not set
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SMP=y
-CONFIG_SMP_ON_UP=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_BCM53XX=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_GPIO=y
-CONFIG_SPI_MASTER=y
-CONFIG_STOP_MACHINE=y
-CONFIG_SWCONFIG=y
-CONFIG_SWIOTLB=y
-CONFIG_SWP_EMULATE=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_THUMB2_KERNEL is not set
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TREE_RCU=y
-CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_XZ=y
-CONFIG_UBIFS_FS_ZLIB=y
-CONFIG_UID16=y
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
-CONFIG_VECTORS_BASE=0xffff0000
-# CONFIG_VFP is not set
-CONFIG_WATCHDOG_CORE=y
-# CONFIG_XEN is not set
-CONFIG_XPS=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/bcm53xx/patches-3.18/003-mtd-spi-nor-from-3.19.patch b/target/linux/bcm53xx/patches-3.18/003-mtd-spi-nor-from-3.19.patch
deleted file mode 100644
index 281c12b2a6..0000000000
--- a/target/linux/bcm53xx/patches-3.18/003-mtd-spi-nor-from-3.19.patch
+++ /dev/null
@@ -1,662 +0,0 @@
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -26,7 +26,38 @@
- /* Define max times to check status register before we give up. */
- #define MAX_READY_WAIT_JIFFIES (40 * HZ) /* M25P16 specs 40s max chip erase */
-
--#define JEDEC_MFR(_jedec_id) ((_jedec_id) >> 16)
-+#define SPI_NOR_MAX_ID_LEN 6
-+
-+struct flash_info {
-+ /*
-+ * This array stores the ID bytes.
-+ * The first three bytes are the JEDIC ID.
-+ * JEDEC ID zero means "no ID" (mostly older chips).
-+ */
-+ u8 id[SPI_NOR_MAX_ID_LEN];
-+ u8 id_len;
-+
-+ /* The size listed here is what works with SPINOR_OP_SE, which isn't
-+ * necessarily called a "sector" by the vendor.
-+ */
-+ unsigned sector_size;
-+ u16 n_sectors;
-+
-+ u16 page_size;
-+ u16 addr_width;
-+
-+ u16 flags;
-+#define SECT_4K 0x01 /* SPINOR_OP_BE_4K works uniformly */
-+#define SPI_NOR_NO_ERASE 0x02 /* No erase command needed */
-+#define SST_WRITE 0x04 /* use SST byte programming */
-+#define SPI_NOR_NO_FR 0x08 /* Can't do fastread */
-+#define SECT_4K_PMC 0x10 /* SPINOR_OP_BE_4K_PMC works uniformly */
-+#define SPI_NOR_DUAL_READ 0x20 /* Flash supports Dual Read */
-+#define SPI_NOR_QUAD_READ 0x40 /* Flash supports Quad Read */
-+#define USE_FSR 0x80 /* use flag status register */
-+};
-+
-+#define JEDEC_MFR(info) ((info)->id[0])
-
- static const struct spi_device_id *spi_nor_match_id(const char *name);
-
-@@ -98,7 +129,7 @@ static inline int spi_nor_read_dummy_cyc
- case SPI_NOR_FAST:
- case SPI_NOR_DUAL:
- case SPI_NOR_QUAD:
-- return 1;
-+ return 8;
- case SPI_NOR_NORMAL:
- return 0;
- }
-@@ -138,13 +169,14 @@ static inline struct spi_nor *mtd_to_spi
- }
-
- /* Enable/disable 4-byte addressing mode. */
--static inline int set_4byte(struct spi_nor *nor, u32 jedec_id, int enable)
-+static inline int set_4byte(struct spi_nor *nor, struct flash_info *info,
-+ int enable)
- {
- int status;
- bool need_wren = false;
- u8 cmd;
-
-- switch (JEDEC_MFR(jedec_id)) {
-+ switch (JEDEC_MFR(info)) {
- case CFI_MFR_ST: /* Micron, actually */
- /* Some Micron need WREN command; all will accept it */
- need_wren = true;
-@@ -165,81 +197,74 @@ static inline int set_4byte(struct spi_n
- return nor->write_reg(nor, SPINOR_OP_BRWR, nor->cmd_buf, 1, 0);
- }
- }
--
--static int spi_nor_wait_till_ready(struct spi_nor *nor)
-+static inline int spi_nor_sr_ready(struct spi_nor *nor)
- {
-- unsigned long deadline;
-- int sr;
--
-- deadline = jiffies + MAX_READY_WAIT_JIFFIES;
--
-- do {
-- cond_resched();
-+ int sr = read_sr(nor);
-+ if (sr < 0)
-+ return sr;
-+ else
-+ return !(sr & SR_WIP);
-+}
-
-- sr = read_sr(nor);
-- if (sr < 0)
-- break;
-- else if (!(sr & SR_WIP))
-- return 0;
-- } while (!time_after_eq(jiffies, deadline));
-+static inline int spi_nor_fsr_ready(struct spi_nor *nor)
-+{
-+ int fsr = read_fsr(nor);
-+ if (fsr < 0)
-+ return fsr;
-+ else
-+ return fsr & FSR_READY;
-+}
-
-- return -ETIMEDOUT;
-+static int spi_nor_ready(struct spi_nor *nor)
-+{
-+ int sr, fsr;
-+ sr = spi_nor_sr_ready(nor);
-+ if (sr < 0)
-+ return sr;
-+ fsr = nor->flags & SNOR_F_USE_FSR ? spi_nor_fsr_ready(nor) : 1;
-+ if (fsr < 0)
-+ return fsr;
-+ return sr && fsr;
- }
-
--static int spi_nor_wait_till_fsr_ready(struct spi_nor *nor)
-+/*
-+ * Service routine to read status register until ready, or timeout occurs.
-+ * Returns non-zero if error.
-+ */
-+static int spi_nor_wait_till_ready(struct spi_nor *nor)
- {
- unsigned long deadline;
-- int sr;
-- int fsr;
-+ int timeout = 0, ret;
-
- deadline = jiffies + MAX_READY_WAIT_JIFFIES;
-
-- do {
-+ while (!timeout) {
-+ if (time_after_eq(jiffies, deadline))
-+ timeout = 1;
-+
-+ ret = spi_nor_ready(nor);
-+ if (ret < 0)
-+ return ret;
-+ if (ret)
-+ return 0;
-+
- cond_resched();
-+ }
-
-- sr = read_sr(nor);
-- if (sr < 0) {
-- break;
-- } else if (!(sr & SR_WIP)) {
-- fsr = read_fsr(nor);
-- if (fsr < 0)
-- break;
-- if (fsr & FSR_READY)
-- return 0;
-- }
-- } while (!time_after_eq(jiffies, deadline));
-+ dev_err(nor->dev, "flash operation timed out\n");
-
- return -ETIMEDOUT;
- }
-
- /*
-- * Service routine to read status register until ready, or timeout occurs.
-- * Returns non-zero if error.
-- */
--static int wait_till_ready(struct spi_nor *nor)
--{
-- return nor->wait_till_ready(nor);
--}
--
--/*
- * Erase the whole flash memory
- *
- * Returns 0 if successful, non-zero otherwise.
- */
- static int erase_chip(struct spi_nor *nor)
- {
-- int ret;
--
- dev_dbg(nor->dev, " %lldKiB\n", (long long)(nor->mtd->size >> 10));
-
-- /* Wait until finished previous write command. */
-- ret = wait_till_ready(nor);
-- if (ret)
-- return ret;
--
-- /* Send write enable, then erase commands. */
-- write_enable(nor);
--
- return nor->write_reg(nor, SPINOR_OP_CHIP_ERASE, NULL, 0, 0);
- }
-
-@@ -294,11 +319,17 @@ static int spi_nor_erase(struct mtd_info
-
- /* whole-chip erase? */
- if (len == mtd->size) {
-+ write_enable(nor);
-+
- if (erase_chip(nor)) {
- ret = -EIO;
- goto erase_err;
- }
-
-+ ret = spi_nor_wait_till_ready(nor);
-+ if (ret)
-+ goto erase_err;
-+
- /* REVISIT in some cases we could speed up erasing large regions
- * by using SPINOR_OP_SE instead of SPINOR_OP_BE_4K. We may have set up
- * to use "small sector erase", but that's not always optimal.
-@@ -307,6 +338,8 @@ static int spi_nor_erase(struct mtd_info
- /* "sector"-at-a-time erase */
- } else {
- while (len) {
-+ write_enable(nor);
-+
- if (nor->erase(nor, addr)) {
- ret = -EIO;
- goto erase_err;
-@@ -314,9 +347,15 @@ static int spi_nor_erase(struct mtd_info
-
- addr += mtd->erasesize;
- len -= mtd->erasesize;
-+
-+ ret = spi_nor_wait_till_ready(nor);
-+ if (ret)
-+ goto erase_err;
- }
- }
-
-+ write_disable(nor);
-+
- spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_ERASE);
-
- instr->state = MTD_ERASE_DONE;
-@@ -341,11 +380,6 @@ static int spi_nor_lock(struct mtd_info
- if (ret)
- return ret;
-
-- /* Wait until finished previous command */
-- ret = wait_till_ready(nor);
-- if (ret)
-- goto err;
--
- status_old = read_sr(nor);
-
- if (offset < mtd->size - (mtd->size / 2))
-@@ -388,11 +422,6 @@ static int spi_nor_unlock(struct mtd_inf
- if (ret)
- return ret;
-
-- /* Wait until finished previous command */
-- ret = wait_till_ready(nor);
-- if (ret)
-- goto err;
--
- status_old = read_sr(nor);
-
- if (offset+len > mtd->size - (mtd->size / 64))
-@@ -424,38 +453,34 @@ err:
- return ret;
- }
-
--struct flash_info {
-- /* JEDEC id zero means "no ID" (most older chips); otherwise it has
-- * a high byte of zero plus three data bytes: the manufacturer id,
-- * then a two byte device id.
-- */
-- u32 jedec_id;
-- u16 ext_id;
--
-- /* The size listed here is what works with SPINOR_OP_SE, which isn't
-- * necessarily called a "sector" by the vendor.
-- */
-- unsigned sector_size;
-- u16 n_sectors;
--
-- u16 page_size;
-- u16 addr_width;
--
-- u16 flags;
--#define SECT_4K 0x01 /* SPINOR_OP_BE_4K works uniformly */
--#define SPI_NOR_NO_ERASE 0x02 /* No erase command needed */
--#define SST_WRITE 0x04 /* use SST byte programming */
--#define SPI_NOR_NO_FR 0x08 /* Can't do fastread */
--#define SECT_4K_PMC 0x10 /* SPINOR_OP_BE_4K_PMC works uniformly */
--#define SPI_NOR_DUAL_READ 0x20 /* Flash supports Dual Read */
--#define SPI_NOR_QUAD_READ 0x40 /* Flash supports Quad Read */
--#define USE_FSR 0x80 /* use flag status register */
--};
--
-+/* Used when the "_ext_id" is two bytes at most */
- #define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags) \
- ((kernel_ulong_t)&(struct flash_info) { \
-- .jedec_id = (_jedec_id), \
-- .ext_id = (_ext_id), \
-+ .id = { \
-+ ((_jedec_id) >> 16) & 0xff, \
-+ ((_jedec_id) >> 8) & 0xff, \
-+ (_jedec_id) & 0xff, \
-+ ((_ext_id) >> 8) & 0xff, \
-+ (_ext_id) & 0xff, \
-+ }, \
-+ .id_len = (!(_jedec_id) ? 0 : (3 + ((_ext_id) ? 2 : 0))), \
-+ .sector_size = (_sector_size), \
-+ .n_sectors = (_n_sectors), \
-+ .page_size = 256, \
-+ .flags = (_flags), \
-+ })
-+
-+#define INFO6(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags) \
-+ ((kernel_ulong_t)&(struct flash_info) { \
-+ .id = { \
-+ ((_jedec_id) >> 16) & 0xff, \
-+ ((_jedec_id) >> 8) & 0xff, \
-+ (_jedec_id) & 0xff, \
-+ ((_ext_id) >> 16) & 0xff, \
-+ ((_ext_id) >> 8) & 0xff, \
-+ (_ext_id) & 0xff, \
-+ }, \
-+ .id_len = 6, \
- .sector_size = (_sector_size), \
- .n_sectors = (_n_sectors), \
- .page_size = 256, \
-@@ -507,6 +532,9 @@ static const struct spi_device_id spi_no
- { "mr25h256", CAT25_INFO( 32 * 1024, 1, 256, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
- { "mr25h10", CAT25_INFO(128 * 1024, 1, 256, 3, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
-
-+ /* Fujitsu */
-+ { "mb85rs1mt", INFO(0x047f27, 0, 128 * 1024, 1, SPI_NOR_NO_ERASE) },
-+
- /* GigaDevice */
- { "gd25q32", INFO(0xc84016, 0, 64 * 1024, 64, SECT_4K) },
- { "gd25q64", INFO(0xc84017, 0, 64 * 1024, 128, SECT_4K) },
-@@ -536,6 +564,7 @@ static const struct spi_device_id spi_no
- { "mx66l1g55g", INFO(0xc2261b, 0, 64 * 1024, 2048, SPI_NOR_QUAD_READ) },
-
- /* Micron */
-+ { "n25q032", INFO(0x20ba16, 0, 64 * 1024, 64, 0) },
- { "n25q064", INFO(0x20ba17, 0, 64 * 1024, 128, 0) },
- { "n25q128a11", INFO(0x20bb18, 0, 64 * 1024, 256, 0) },
- { "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256, 0) },
-@@ -560,6 +589,7 @@ static const struct spi_device_id spi_no
- { "s70fl01gs", INFO(0x010221, 0x4d00, 256 * 1024, 256, 0) },
- { "s25sl12800", INFO(0x012018, 0x0300, 256 * 1024, 64, 0) },
- { "s25sl12801", INFO(0x012018, 0x0301, 64 * 1024, 256, 0) },
-+ { "s25fl128s", INFO6(0x012018, 0x4d0180, 64 * 1024, 256, SPI_NOR_QUAD_READ) },
- { "s25fl129p0", INFO(0x012018, 0x4d00, 256 * 1024, 64, 0) },
- { "s25fl129p1", INFO(0x012018, 0x4d01, 64 * 1024, 256, 0) },
- { "s25sl004a", INFO(0x010212, 0, 64 * 1024, 8, 0) },
-@@ -582,6 +612,7 @@ static const struct spi_device_id spi_no
- { "sst25wf010", INFO(0xbf2502, 0, 64 * 1024, 2, SECT_4K | SST_WRITE) },
- { "sst25wf020", INFO(0xbf2503, 0, 64 * 1024, 4, SECT_4K | SST_WRITE) },
- { "sst25wf040", INFO(0xbf2504, 0, 64 * 1024, 8, SECT_4K | SST_WRITE) },
-+ { "sst25wf080", INFO(0xbf2505, 0, 64 * 1024, 16, SECT_4K | SST_WRITE) },
-
- /* ST Microelectronics -- newer production may have feature updates */
- { "m25p05", INFO(0x202010, 0, 32 * 1024, 2, 0) },
-@@ -593,7 +624,6 @@ static const struct spi_device_id spi_no
- { "m25p32", INFO(0x202016, 0, 64 * 1024, 64, 0) },
- { "m25p64", INFO(0x202017, 0, 64 * 1024, 128, 0) },
- { "m25p128", INFO(0x202018, 0, 256 * 1024, 64, 0) },
-- { "n25q032", INFO(0x20ba16, 0, 64 * 1024, 64, 0) },
-
- { "m25p05-nonjedec", INFO(0, 0, 32 * 1024, 2, 0) },
- { "m25p10-nonjedec", INFO(0, 0, 32 * 1024, 4, 0) },
-@@ -649,32 +679,24 @@ static const struct spi_device_id spi_no
- static const struct spi_device_id *spi_nor_read_id(struct spi_nor *nor)
- {
- int tmp;
-- u8 id[5];
-- u32 jedec;
-- u16 ext_jedec;
-+ u8 id[SPI_NOR_MAX_ID_LEN];
- struct flash_info *info;
-
-- tmp = nor->read_reg(nor, SPINOR_OP_RDID, id, 5);
-+ tmp = nor->read_reg(nor, SPINOR_OP_RDID, id, SPI_NOR_MAX_ID_LEN);
- if (tmp < 0) {
- dev_dbg(nor->dev, " error %d reading JEDEC ID\n", tmp);
- return ERR_PTR(tmp);
- }
-- jedec = id[0];
-- jedec = jedec << 8;
-- jedec |= id[1];
-- jedec = jedec << 8;
-- jedec |= id[2];
--
-- ext_jedec = id[3] << 8 | id[4];
-
- for (tmp = 0; tmp < ARRAY_SIZE(spi_nor_ids) - 1; tmp++) {
- info = (void *)spi_nor_ids[tmp].driver_data;
-- if (info->jedec_id == jedec) {
-- if (info->ext_id == 0 || info->ext_id == ext_jedec)
-+ if (info->id_len) {
-+ if (!memcmp(info->id, id, info->id_len))
- return &spi_nor_ids[tmp];
- }
- }
-- dev_err(nor->dev, "unrecognized JEDEC id %06x\n", jedec);
-+ dev_err(nor->dev, "unrecognized JEDEC id bytes: %02x, %2x, %2x\n",
-+ id[0], id[1], id[2]);
- return ERR_PTR(-ENODEV);
- }
-
-@@ -709,11 +731,6 @@ static int sst_write(struct mtd_info *mt
- if (ret)
- return ret;
-
-- /* Wait until finished previous write command. */
-- ret = wait_till_ready(nor);
-- if (ret)
-- goto time_out;
--
- write_enable(nor);
-
- nor->sst_write_second = false;
-@@ -725,7 +742,7 @@ static int sst_write(struct mtd_info *mt
-
- /* write one byte. */
- nor->write(nor, to, 1, retlen, buf);
-- ret = wait_till_ready(nor);
-+ ret = spi_nor_wait_till_ready(nor);
- if (ret)
- goto time_out;
- }
-@@ -737,7 +754,7 @@ static int sst_write(struct mtd_info *mt
-
- /* write two bytes. */
- nor->write(nor, to, 2, retlen, buf + actual);
-- ret = wait_till_ready(nor);
-+ ret = spi_nor_wait_till_ready(nor);
- if (ret)
- goto time_out;
- to += 2;
-@@ -746,7 +763,7 @@ static int sst_write(struct mtd_info *mt
- nor->sst_write_second = false;
-
- write_disable(nor);
-- ret = wait_till_ready(nor);
-+ ret = spi_nor_wait_till_ready(nor);
- if (ret)
- goto time_out;
-
-@@ -757,7 +774,7 @@ static int sst_write(struct mtd_info *mt
- nor->program_opcode = SPINOR_OP_BP;
- nor->write(nor, to, 1, retlen, buf + actual);
-
-- ret = wait_till_ready(nor);
-+ ret = spi_nor_wait_till_ready(nor);
- if (ret)
- goto time_out;
- write_disable(nor);
-@@ -785,11 +802,6 @@ static int spi_nor_write(struct mtd_info
- if (ret)
- return ret;
-
-- /* Wait until finished previous write command. */
-- ret = wait_till_ready(nor);
-- if (ret)
-- goto write_err;
--
- write_enable(nor);
-
- page_offset = to & (nor->page_size - 1);
-@@ -808,16 +820,20 @@ static int spi_nor_write(struct mtd_info
- if (page_size > nor->page_size)
- page_size = nor->page_size;
-
-- wait_till_ready(nor);
-+ ret = spi_nor_wait_till_ready(nor);
-+ if (ret)
-+ goto write_err;
-+
- write_enable(nor);
-
- nor->write(nor, to + i, page_size, retlen, buf + i);
- }
- }
-
-+ ret = spi_nor_wait_till_ready(nor);
- write_err:
- spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_WRITE);
-- return 0;
-+ return ret;
- }
-
- static int macronix_quad_enable(struct spi_nor *nor)
-@@ -830,7 +846,7 @@ static int macronix_quad_enable(struct s
- nor->cmd_buf[0] = val | SR_QUAD_EN_MX;
- nor->write_reg(nor, SPINOR_OP_WRSR, nor->cmd_buf, 1, 0);
-
-- if (wait_till_ready(nor))
-+ if (spi_nor_wait_till_ready(nor))
- return 1;
-
- ret = read_sr(nor);
-@@ -880,11 +896,11 @@ static int spansion_quad_enable(struct s
- return 0;
- }
-
--static int set_quad_mode(struct spi_nor *nor, u32 jedec_id)
-+static int set_quad_mode(struct spi_nor *nor, struct flash_info *info)
- {
- int status;
-
-- switch (JEDEC_MFR(jedec_id)) {
-+ switch (JEDEC_MFR(info)) {
- case CFI_MFR_MACRONIX:
- status = macronix_quad_enable(nor);
- if (status) {
-@@ -910,11 +926,6 @@ static int spi_nor_check(struct spi_nor
- return -EINVAL;
- }
-
-- if (!nor->read_id)
-- nor->read_id = spi_nor_read_id;
-- if (!nor->wait_till_ready)
-- nor->wait_till_ready = spi_nor_wait_till_ready;
--
- return 0;
- }
-
-@@ -932,16 +943,24 @@ int spi_nor_scan(struct spi_nor *nor, co
- if (ret)
- return ret;
-
-- id = spi_nor_match_id(name);
-- if (!id)
-+ /* Try to auto-detect if chip name wasn't specified */
-+ if (!name)
-+ id = spi_nor_read_id(nor);
-+ else
-+ id = spi_nor_match_id(name);
-+ if (IS_ERR_OR_NULL(id))
- return -ENOENT;
-
- info = (void *)id->driver_data;
-
-- if (info->jedec_id) {
-+ /*
-+ * If caller has specified name of flash model that can normally be
-+ * detected using JEDEC, let's verify it.
-+ */
-+ if (name && info->id_len) {
- const struct spi_device_id *jid;
-
-- jid = nor->read_id(nor);
-+ jid = spi_nor_read_id(nor);
- if (IS_ERR(jid)) {
- return PTR_ERR(jid);
- } else if (jid != id) {
-@@ -966,9 +985,9 @@ int spi_nor_scan(struct spi_nor *nor, co
- * up with the software protection bits set
- */
-
-- if (JEDEC_MFR(info->jedec_id) == CFI_MFR_ATMEL ||
-- JEDEC_MFR(info->jedec_id) == CFI_MFR_INTEL ||
-- JEDEC_MFR(info->jedec_id) == CFI_MFR_SST) {
-+ if (JEDEC_MFR(info) == CFI_MFR_ATMEL ||
-+ JEDEC_MFR(info) == CFI_MFR_INTEL ||
-+ JEDEC_MFR(info) == CFI_MFR_SST) {
- write_enable(nor);
- write_sr(nor, 0);
- }
-@@ -983,7 +1002,7 @@ int spi_nor_scan(struct spi_nor *nor, co
- mtd->_read = spi_nor_read;
-
- /* nor protection support for STmicro chips */
-- if (JEDEC_MFR(info->jedec_id) == CFI_MFR_ST) {
-+ if (JEDEC_MFR(info) == CFI_MFR_ST) {
- mtd->_lock = spi_nor_lock;
- mtd->_unlock = spi_nor_unlock;
- }
-@@ -994,9 +1013,8 @@ int spi_nor_scan(struct spi_nor *nor, co
- else
- mtd->_write = spi_nor_write;
-
-- if ((info->flags & USE_FSR) &&
-- nor->wait_till_ready == spi_nor_wait_till_ready)
-- nor->wait_till_ready = spi_nor_wait_till_fsr_ready;
-+ if (info->flags & USE_FSR)
-+ nor->flags |= SNOR_F_USE_FSR;
-
- #ifdef CONFIG_MTD_SPI_NOR_USE_4K_SECTORS
- /* prefer "small sector" erase if possible */
-@@ -1037,7 +1055,7 @@ int spi_nor_scan(struct spi_nor *nor, co
-
- /* Quad/Dual-read mode takes precedence over fast/normal */
- if (mode == SPI_NOR_QUAD && info->flags & SPI_NOR_QUAD_READ) {
-- ret = set_quad_mode(nor, info->jedec_id);
-+ ret = set_quad_mode(nor, info);
- if (ret) {
- dev_err(dev, "quad mode not supported\n");
- return ret;
-@@ -1073,7 +1091,7 @@ int spi_nor_scan(struct spi_nor *nor, co
- else if (mtd->size > 0x1000000) {
- /* enable 4-byte addressing if the device exceeds 16MiB */
- nor->addr_width = 4;
-- if (JEDEC_MFR(info->jedec_id) == CFI_MFR_AMD) {
-+ if (JEDEC_MFR(info) == CFI_MFR_AMD) {
- /* Dedicated 4-byte command set */
- switch (nor->flash_read) {
- case SPI_NOR_QUAD:
-@@ -1094,7 +1112,7 @@ int spi_nor_scan(struct spi_nor *nor, co
- nor->erase_opcode = SPINOR_OP_SE_4B;
- mtd->erasesize = info->sector_size;
- } else
-- set_4byte(nor, info->jedec_id, 1);
-+ set_4byte(nor, info, 1);
- } else {
- nor->addr_width = 3;
- }
---- a/include/linux/mtd/spi-nor.h
-+++ b/include/linux/mtd/spi-nor.h
-@@ -116,6 +116,10 @@ enum spi_nor_ops {
- SPI_NOR_OPS_UNLOCK,
- };
-
-+enum spi_nor_option_flags {
-+ SNOR_F_USE_FSR = BIT(0),
-+};
-+
- /**
- * struct spi_nor - Structure for defining a the SPI NOR layer
- * @mtd: point to a mtd_info structure
-@@ -129,6 +133,7 @@ enum spi_nor_ops {
- * @program_opcode: the program opcode
- * @flash_read: the mode of the read
- * @sst_write_second: used by the SST write operation
-+ * @flags: flag options for the current SPI-NOR (SNOR_F_*)
- * @cfg: used by the read_xfer/write_xfer
- * @cmd_buf: used by the write_reg
- * @prepare: [OPTIONAL] do some preparations for the
-@@ -139,9 +144,6 @@ enum spi_nor_ops {
- * @write_xfer: [OPTIONAL] the writefundamental primitive
- * @read_reg: [DRIVER-SPECIFIC] read out the register
- * @write_reg: [DRIVER-SPECIFIC] write data to the register
-- * @read_id: [REPLACEABLE] read out the ID data, and find
-- * the proper spi_device_id
-- * @wait_till_ready: [REPLACEABLE] wait till the NOR becomes ready
- * @read: [DRIVER-SPECIFIC] read data from the SPI NOR
- * @write: [DRIVER-SPECIFIC] write data to the SPI NOR
- * @erase: [DRIVER-SPECIFIC] erase a sector of the SPI NOR
-@@ -160,6 +162,7 @@ struct spi_nor {
- u8 program_opcode;
- enum read_mode flash_read;
- bool sst_write_second;
-+ u32 flags;
- struct spi_nor_xfer_cfg cfg;
- u8 cmd_buf[SPI_NOR_MAX_CMD_SIZE];
-
-@@ -172,8 +175,6 @@ struct spi_nor {
- int (*read_reg)(struct spi_nor *nor, u8 opcode, u8 *buf, int len);
- int (*write_reg)(struct spi_nor *nor, u8 opcode, u8 *buf, int len,
- int write_enable);
-- const struct spi_device_id *(*read_id)(struct spi_nor *nor);
-- int (*wait_till_ready)(struct spi_nor *nor);
-
- int (*read)(struct spi_nor *nor, loff_t from,
- size_t len, size_t *retlen, u_char *read_buf);
diff --git a/target/linux/bcm53xx/patches-3.18/004-mtd-spi-nor-from-3.20.patch b/target/linux/bcm53xx/patches-3.18/004-mtd-spi-nor-from-3.20.patch
deleted file mode 100644
index e2ef75e3dc..0000000000
--- a/target/linux/bcm53xx/patches-3.18/004-mtd-spi-nor-from-3.20.patch
+++ /dev/null
@@ -1,116 +0,0 @@
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -538,6 +538,7 @@ static const struct spi_device_id spi_no
- /* GigaDevice */
- { "gd25q32", INFO(0xc84016, 0, 64 * 1024, 64, SECT_4K) },
- { "gd25q64", INFO(0xc84017, 0, 64 * 1024, 128, SECT_4K) },
-+ { "gd25q128", INFO(0xc84018, 0, 64 * 1024, 256, SECT_4K) },
-
- /* Intel/Numonyx -- xxxs33b */
- { "160s33b", INFO(0x898911, 0, 64 * 1024, 32, 0) },
-@@ -564,14 +565,14 @@ static const struct spi_device_id spi_no
- { "mx66l1g55g", INFO(0xc2261b, 0, 64 * 1024, 2048, SPI_NOR_QUAD_READ) },
-
- /* Micron */
-- { "n25q032", INFO(0x20ba16, 0, 64 * 1024, 64, 0) },
-- { "n25q064", INFO(0x20ba17, 0, 64 * 1024, 128, 0) },
-- { "n25q128a11", INFO(0x20bb18, 0, 64 * 1024, 256, 0) },
-- { "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256, 0) },
-- { "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512, SECT_4K) },
-- { "n25q512a", INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K) },
-- { "n25q512ax3", INFO(0x20ba20, 0, 64 * 1024, 1024, USE_FSR) },
-- { "n25q00", INFO(0x20ba21, 0, 64 * 1024, 2048, USE_FSR) },
-+ { "n25q032", INFO(0x20ba16, 0, 64 * 1024, 64, SPI_NOR_QUAD_READ) },
-+ { "n25q064", INFO(0x20ba17, 0, 64 * 1024, 128, SPI_NOR_QUAD_READ) },
-+ { "n25q128a11", INFO(0x20bb18, 0, 64 * 1024, 256, SPI_NOR_QUAD_READ) },
-+ { "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256, SPI_NOR_QUAD_READ) },
-+ { "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_QUAD_READ) },
-+ { "n25q512a", INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
-+ { "n25q512ax3", INFO(0x20ba20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
-+ { "n25q00", INFO(0x20ba21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
-
- /* PMC */
- { "pm25lv512", INFO(0, 0, 32 * 1024, 2, SECT_4K_PMC) },
-@@ -896,6 +897,45 @@ static int spansion_quad_enable(struct s
- return 0;
- }
-
-+static int micron_quad_enable(struct spi_nor *nor)
-+{
-+ int ret;
-+ u8 val;
-+
-+ ret = nor->read_reg(nor, SPINOR_OP_RD_EVCR, &val, 1);
-+ if (ret < 0) {
-+ dev_err(nor->dev, "error %d reading EVCR\n", ret);
-+ return ret;
-+ }
-+
-+ write_enable(nor);
-+
-+ /* set EVCR, enable quad I/O */
-+ nor->cmd_buf[0] = val & ~EVCR_QUAD_EN_MICRON;
-+ ret = nor->write_reg(nor, SPINOR_OP_WD_EVCR, nor->cmd_buf, 1, 0);
-+ if (ret < 0) {
-+ dev_err(nor->dev, "error while writing EVCR register\n");
-+ return ret;
-+ }
-+
-+ ret = spi_nor_wait_till_ready(nor);
-+ if (ret)
-+ return ret;
-+
-+ /* read EVCR and check it */
-+ ret = nor->read_reg(nor, SPINOR_OP_RD_EVCR, &val, 1);
-+ if (ret < 0) {
-+ dev_err(nor->dev, "error %d reading EVCR\n", ret);
-+ return ret;
-+ }
-+ if (val & EVCR_QUAD_EN_MICRON) {
-+ dev_err(nor->dev, "Micron EVCR Quad bit not clear\n");
-+ return -EINVAL;
-+ }
-+
-+ return 0;
-+}
-+
- static int set_quad_mode(struct spi_nor *nor, struct flash_info *info)
- {
- int status;
-@@ -908,6 +948,13 @@ static int set_quad_mode(struct spi_nor
- return -EINVAL;
- }
- return status;
-+ case CFI_MFR_ST:
-+ status = micron_quad_enable(nor);
-+ if (status) {
-+ dev_err(nor->dev, "Micron quad-read not enabled\n");
-+ return -EINVAL;
-+ }
-+ return status;
- default:
- status = spansion_quad_enable(nor);
- if (status) {
---- a/include/linux/mtd/spi-nor.h
-+++ b/include/linux/mtd/spi-nor.h
-@@ -56,6 +56,10 @@
- /* Used for Spansion flashes only. */
- #define SPINOR_OP_BRWR 0x17 /* Bank register write */
-
-+/* Used for Micron flashes only. */
-+#define SPINOR_OP_RD_EVCR 0x65 /* Read EVCR register */
-+#define SPINOR_OP_WD_EVCR 0x61 /* Write EVCR register */
-+
- /* Status Register bits. */
- #define SR_WIP 1 /* Write in progress */
- #define SR_WEL 2 /* Write enable latch */
-@@ -67,6 +71,9 @@
-
- #define SR_QUAD_EN_MX 0x40 /* Macronix Quad I/O */
-
-+/* Enhanced Volatile Configuration Register bits */
-+#define EVCR_QUAD_EN_MICRON 0x80 /* Micron Quad I/O */
-+
- /* Flag Status Register bits */
- #define FSR_READY 0x80
-
diff --git a/target/linux/bcm53xx/patches-3.18/043-ARM-BCM5301X-fix-early-serial-console.patch b/target/linux/bcm53xx/patches-3.18/043-ARM-BCM5301X-fix-early-serial-console.patch
deleted file mode 100644
index c9dc041062..0000000000
--- a/target/linux/bcm53xx/patches-3.18/043-ARM-BCM5301X-fix-early-serial-console.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From 140bd60383309e82b5cae3294a907c11a0a12b90 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sun, 14 Sep 2014 21:43:40 +0200
-Subject: [PATCH] ARM: BCM5301X: fix early serial console
-
-This device actually has a 8250 serial with a shift of 0.
-Tested this on a BCM4708.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-Signed-off-by: Arnd Bergmann <arnd@arndb.de>
----
- arch/arm/Kconfig.debug | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/arch/arm/Kconfig.debug
-+++ b/arch/arm/Kconfig.debug
-@@ -113,7 +113,7 @@ choice
- config DEBUG_BCM_5301X
- bool "Kernel low-level debugging on BCM5301X UART1"
- depends on ARCH_BCM_5301X
-- select DEBUG_UART_PL01X
-+ select DEBUG_UART_8250
-
- config DEBUG_BCM_KONA_UART
- bool "Kernel low-level debugging messages via BCM KONA UART"
-@@ -1249,7 +1249,7 @@ config DEBUG_UART_VIRT
- config DEBUG_UART_8250_SHIFT
- int "Register offset shift for the 8250 debug UART"
- depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
-- default 0 if FOOTBRIDGE || ARCH_IOP32X
-+ default 0 if FOOTBRIDGE || ARCH_IOP32X || DEBUG_BCM_5301X
- default 2
-
- config DEBUG_UART_8250_WORD
diff --git a/target/linux/bcm53xx/patches-3.18/044-ARM-BCM5301X-Add-Broadcom-s-bus-axi-to-the-DTS-file.patch b/target/linux/bcm53xx/patches-3.18/044-ARM-BCM5301X-Add-Broadcom-s-bus-axi-to-the-DTS-file.patch
deleted file mode 100644
index ac52aa0162..0000000000
--- a/target/linux/bcm53xx/patches-3.18/044-ARM-BCM5301X-Add-Broadcom-s-bus-axi-to-the-DTS-file.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From a2533caee935fff97e3e8dbfad5cc159e6bf6034 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Wed, 1 Oct 2014 09:21:07 +0200
-Subject: [PATCH 1/2] ARM: BCM5301X: Add Broadcom's bus-axi to the DTS file
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- arch/arm/boot/dts/bcm5301x.dtsi | 16 ++++++++++++++++
- 1 file changed, 16 insertions(+)
-
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -8,6 +8,7 @@
- * Licensed under the GNU/GPL. See COPYING for details.
- */
-
-+#include <dt-bindings/gpio/gpio.h>
- #include <dt-bindings/interrupt-controller/irq.h>
- #include <dt-bindings/interrupt-controller/arm-gic.h>
- #include "skeleton.dtsi"
-@@ -92,4 +93,19 @@
- clock-frequency = <400000000>;
- };
- };
-+
-+ axi@18000000 {
-+ compatible = "brcm,bus-axi";
-+ reg = <0x18000000 0x1000>;
-+ ranges = <0x00000000 0x18000000 0x00100000>;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ chipcommon: chipcommon@0 {
-+ reg = <0x00000000 0x1000>;
-+
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ };
-+ };
- };
diff --git a/target/linux/bcm53xx/patches-3.18/045-ARM-BCM5301X-Add-LEDs-for-Netgear-R6250-V1.patch b/target/linux/bcm53xx/patches-3.18/045-ARM-BCM5301X-Add-LEDs-for-Netgear-R6250-V1.patch
deleted file mode 100644
index c394f3c481..0000000000
--- a/target/linux/bcm53xx/patches-3.18/045-ARM-BCM5301X-Add-LEDs-for-Netgear-R6250-V1.patch
+++ /dev/null
@@ -1,54 +0,0 @@
-From b7e4d148906685882a081e7e50692313c5a8724e Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Wed, 1 Oct 2014 09:23:09 +0200
-Subject: [PATCH 2/2] ARM: BCM5301X: Add LEDs for Netgear R6250 V1
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 34 +++++++++++++++++++++++++++++
- 1 file changed, 34 insertions(+)
-
---- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-@@ -32,4 +32,38 @@
- status = "okay";
- };
- };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ logo {
-+ label = "bcm53xx:white:logo";
-+ gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-on";
-+ };
-+
-+ power0 {
-+ label = "bcm53xx:green:power";
-+ gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ power1 {
-+ label = "bcm53xx:amber:power";
-+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-on";
-+ };
-+
-+ usb {
-+ label = "bcm53xx:blue:usb";
-+ gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ wireless {
-+ label = "bcm53xx:blue:wireless";
-+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+ };
- };
diff --git a/target/linux/bcm53xx/patches-3.18/046-ARM-BCM5301X-Add-IRQs-to-Broadcom-s-bus-axi-in-DTS-f.patch b/target/linux/bcm53xx/patches-3.18/046-ARM-BCM5301X-Add-IRQs-to-Broadcom-s-bus-axi-in-DTS-f.patch
deleted file mode 100644
index 35cd0ca90a..0000000000
--- a/target/linux/bcm53xx/patches-3.18/046-ARM-BCM5301X-Add-IRQs-to-Broadcom-s-bus-axi-in-DTS-f.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-From dec378827c4aaab6c46ecdd5fc2c3b3155d68743 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Wed, 24 Sep 2014 23:50:07 +0200
-Subject: [PATCH] ARM: BCM5301X: Add IRQs to Broadcom's bus-axi in DTS file
-
-IRQ support for Broadcom's bus-axi driver bcma was merged into John
-Linville's wireless tree and will show up in 3.19. This patch makes use
-of this feature in the DTS file for the the BCM5301X SoCs. I left the
-PCIe controller out, because this still needs some discussion.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/arm/boot/dts/bcm5301x.dtsi | 34 ++++++++++++++++++++++++++++++++++
- 1 file changed, 34 insertions(+)
-
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -101,6 +101,40 @@
- #address-cells = <1>;
- #size-cells = <1>;
-
-+ #interrupt-cells = <1>;
-+ interrupt-map-mask = <0x000fffff 0xffff>;
-+ interrupt-map =
-+ /* ChipCommon */
-+ <0x00000000 0 &gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
-+
-+ /* USB 2.0 Controller */
-+ <0x00021000 0 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
-+
-+ /* USB 3.0 Controller */
-+ <0x00023000 0 &gic GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
-+
-+ /* Ethernet Controller 0 */
-+ <0x00024000 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
-+
-+ /* Ethernet Controller 1 */
-+ <0x00025000 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
-+
-+ /* Ethernet Controller 2 */
-+ <0x00026000 0 &gic GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
-+
-+ /* Ethernet Controller 3 */
-+ <0x00027000 0 &gic GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
-+
-+ /* NAND Controller */
-+ <0x00028000 0 &gic GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00028000 1 &gic GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00028000 2 &gic GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00028000 3 &gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00028000 4 &gic GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00028000 5 &gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00028000 6 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00028000 7 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-+
- chipcommon: chipcommon@0 {
- reg = <0x00000000 0x1000>;
-
diff --git a/target/linux/bcm53xx/patches-3.18/047-ARM-BCM5301X-Add-buttons-for-Netgear-R6250.patch b/target/linux/bcm53xx/patches-3.18/047-ARM-BCM5301X-Add-buttons-for-Netgear-R6250.patch
deleted file mode 100644
index 2b9b900064..0000000000
--- a/target/linux/bcm53xx/patches-3.18/047-ARM-BCM5301X-Add-buttons-for-Netgear-R6250.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-From f6f8234439737171e571a41264280e844a429699 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Sun, 30 Nov 2014 18:28:29 +0100
-Subject: [PATCH] ARM: BCM5301X: Add buttons for Netgear R6250
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 25 +++++++++++++++++++++++++
- arch/arm/boot/dts/bcm5301x.dtsi | 1 +
- 2 files changed, 26 insertions(+)
-
---- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-@@ -66,4 +66,29 @@
- linux,default-trigger = "default-off";
- };
- };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ poll-interval = <200>;
-+
-+ wps {
-+ label = "WPS";
-+ linux,code = <KEY_WPS_BUTTON>;
-+ gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ rfkill {
-+ label = "WiFi";
-+ linux,code = <KEY_RFKILL>;
-+ gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ restart {
-+ label = "Reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
-+ };
-+ };
- };
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -9,6 +9,7 @@
- */
-
- #include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/input/input.h>
- #include <dt-bindings/interrupt-controller/irq.h>
- #include <dt-bindings/interrupt-controller/arm-gic.h>
- #include "skeleton.dtsi"
diff --git a/target/linux/bcm53xx/patches-3.18/048-ARM-BCM5301X-Add-DT-for-Netgear-R6300-V2.patch b/target/linux/bcm53xx/patches-3.18/048-ARM-BCM5301X-Add-DT-for-Netgear-R6300-V2.patch
deleted file mode 100644
index 48a4c7c3b6..0000000000
--- a/target/linux/bcm53xx/patches-3.18/048-ARM-BCM5301X-Add-DT-for-Netgear-R6300-V2.patch
+++ /dev/null
@@ -1,116 +0,0 @@
-From 302a5ef29d497449280422576a1b55c72fc0ba4c Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Thu, 4 Dec 2014 10:22:02 +0100
-Subject: [PATCH] ARM: BCM5301X: Add DT for Netgear R6300 V2
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/arm/boot/dts/Makefile | 4 +-
- arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts | 84 ++++++++++++++++++++++++++
- 2 files changed, 87 insertions(+), 1 deletion(-)
- create mode 100644 arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -54,7 +54,9 @@ dtb-$(CONFIG_ARCH_AT91) += at91-sama5d4e
- dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb
- dtb-$(CONFIG_ARCH_AXXIA) += axm5516-amarillo.dtb
- dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
--dtb-$(CONFIG_ARCH_BCM_5301X) += bcm4708-netgear-r6250.dtb
-+dtb-$(CONFIG_ARCH_BCM_5301X) += \
-+ bcm4708-netgear-r6250.dtb \
-+ bcm4708-netgear-r6300-v2.dtb
- dtb-$(CONFIG_ARCH_BCM_63XX) += bcm963138dvt.dtb
- dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm28155-ap.dtb \
- bcm21664-garnet.dtb
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
-@@ -0,0 +1,84 @@
-+/*
-+ * Broadcom BCM470X / BCM5301X ARM platform code.
-+ * DTS for Netgear R6300 V2
-+ *
-+ * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm4708.dtsi"
-+
-+/ {
-+ compatible = "netgear,r6300v2", "brcm,bcm4708";
-+ model = "Netgear R6300 V2 (BCM4708)";
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000>;
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ logo {
-+ label = "bcm53xx:white:logo";
-+ gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-on";
-+ };
-+
-+ power0 {
-+ label = "bcm53xx:green:power";
-+ gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ power1 {
-+ label = "bcm53xx:amber:power";
-+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-on";
-+ };
-+
-+ usb {
-+ label = "bcm53xx:blue:usb";
-+ gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ wireless {
-+ label = "bcm53xx:blue:wireless";
-+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ poll-interval = <200>;
-+
-+ wps {
-+ label = "WPS";
-+ linux,code = <KEY_WPS_BUTTON>;
-+ gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ rfkill {
-+ label = "WiFi";
-+ linux,code = <KEY_RFKILL>;
-+ gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ restart {
-+ label = "Reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
diff --git a/target/linux/bcm53xx/patches-3.18/049-ARM-BCM5301X-Add-DT-for-Buffalo-WZR-1750DHP.patch b/target/linux/bcm53xx/patches-3.18/049-ARM-BCM5301X-Add-DT-for-Buffalo-WZR-1750DHP.patch
deleted file mode 100644
index d7114f51ab..0000000000
--- a/target/linux/bcm53xx/patches-3.18/049-ARM-BCM5301X-Add-DT-for-Buffalo-WZR-1750DHP.patch
+++ /dev/null
@@ -1,93 +0,0 @@
-From e336a14d2a2aa4431a8acc9eb3305b37f26fb696 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Thu, 4 Dec 2014 10:22:58 +0100
-Subject: [PATCH] ARM: BCM5301X: Add DT for Buffalo WZR-1750DHP
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 64 +++++++++++++++++++++++
- 2 files changed, 65 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -55,6 +55,7 @@ dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.
- dtb-$(CONFIG_ARCH_AXXIA) += axm5516-amarillo.dtb
- dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
- dtb-$(CONFIG_ARCH_BCM_5301X) += \
-+ bcm4708-buffalo-wzr-1750dhp.dtb \
- bcm4708-netgear-r6250.dtb \
- bcm4708-netgear-r6300-v2.dtb
- dtb-$(CONFIG_ARCH_BCM_63XX) += bcm963138dvt.dtb
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-@@ -0,0 +1,64 @@
-+/*
-+ * Broadcom BCM470X / BCM5301X ARM platform code.
-+ * DTS for Buffalo WZR-1750DHP
-+ *
-+ * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm4708.dtsi"
-+
-+/ {
-+ compatible = "buffalo,wzr-1750dhp", "brcm,bcm4708";
-+ model = "Buffalo WZR-1750DHP (BCM4708)";
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000>;
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ poll-interval = <200>;
-+
-+ restart {
-+ label = "Reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ aoss {
-+ label = "AOSS";
-+ linux,code = <KEY_WPS_BUTTON>;
-+ gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ /* Commit mode set by switch? */
-+ mode {
-+ label = "Mode";
-+ linux,code = <KEY_SETUP>;
-+ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ /* Switch: AP mode */
-+ sw_ap {
-+ label = "AP";
-+ linux,code = <BTN_0>;
-+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ eject {
-+ label = "USB eject";
-+ linux,code = <KEY_EJECTCD>;
-+ gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
diff --git a/target/linux/bcm53xx/patches-3.18/050-ARM-BCM5301X-Add-DT-for-Asus-RT-N18U.patch b/target/linux/bcm53xx/patches-3.18/050-ARM-BCM5301X-Add-DT-for-Asus-RT-N18U.patch
deleted file mode 100644
index 93d5a2c287..0000000000
--- a/target/linux/bcm53xx/patches-3.18/050-ARM-BCM5301X-Add-DT-for-Asus-RT-N18U.patch
+++ /dev/null
@@ -1,140 +0,0 @@
-From ae2ed35a40007bf737da452df7081a453bf89ce3 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Thu, 4 Dec 2014 10:23:33 +0100
-Subject: [PATCH] ARM: BCM5301X: Add DT for Asus RT-N18U
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/arm/boot/dts/Makefile | 3 +-
- arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts | 78 +++++++++++++++++++++++++++++
- arch/arm/boot/dts/bcm47081.dtsi | 26 ++++++++++
- 3 files changed, 106 insertions(+), 1 deletion(-)
- create mode 100644 arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
- create mode 100644 arch/arm/boot/dts/bcm47081.dtsi
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -57,7 +57,8 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rp
- dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm4708-buffalo-wzr-1750dhp.dtb \
- bcm4708-netgear-r6250.dtb \
-- bcm4708-netgear-r6300-v2.dtb
-+ bcm4708-netgear-r6300-v2.dtb \
-+ bcm47081-asus-rt-n18u.dtb
- dtb-$(CONFIG_ARCH_BCM_63XX) += bcm963138dvt.dtb
- dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm28155-ap.dtb \
- bcm21664-garnet.dtb
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
-@@ -0,0 +1,78 @@
-+/*
-+ * Broadcom BCM470X / BCM5301X ARM platform code.
-+ * DTS for Asus RT-N18U
-+ *
-+ * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm47081.dtsi"
-+
-+/ {
-+ compatible = "asus,rt-n18u", "brcm,bcm47081", "brcm,bcm4708";
-+ model = "Asus RT-N18U (BCM47081)";
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000>;
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ power {
-+ label = "bcm53xx:blue:power";
-+ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-on";
-+ };
-+
-+ usb2 {
-+ label = "bcm53xx:blue:usb2";
-+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ wan {
-+ label = "bcm53xx:blue:wan";
-+ gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-on";
-+ };
-+
-+ lan {
-+ label = "bcm53xx:blue:lan";
-+ gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-on";
-+ };
-+
-+ usb3 {
-+ label = "bcm53xx:blue:usb3";
-+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ poll-interval = <200>;
-+
-+ restart {
-+ label = "Reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ wps {
-+ label = "WPS";
-+ linux,code = <KEY_WPS_BUTTON>;
-+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm47081.dtsi
-@@ -0,0 +1,26 @@
-+/*
-+ * Broadcom BCM470X / BCM5301X ARM platform code.
-+ * DTS for BCM47081 SoC.
-+ *
-+ * Copyright © 2014 Rafał Miłecki <zajec5@gmail.com>
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+#include "bcm5301x.dtsi"
-+
-+/ {
-+ compatible = "brcm,bcm47081";
-+
-+ cpus {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ cpu@0 {
-+ device_type = "cpu";
-+ compatible = "arm,cortex-a9";
-+ next-level-cache = <&L2>;
-+ reg = <0x0>;
-+ };
-+ };
-+};
diff --git a/target/linux/bcm53xx/patches-3.18/051-ARM-BCM5301X-Add-DT-for-Buffalo-WZR-600DHP2.patch b/target/linux/bcm53xx/patches-3.18/051-ARM-BCM5301X-Add-DT-for-Buffalo-WZR-600DHP2.patch
deleted file mode 100644
index d1551133c4..0000000000
--- a/target/linux/bcm53xx/patches-3.18/051-ARM-BCM5301X-Add-DT-for-Buffalo-WZR-600DHP2.patch
+++ /dev/null
@@ -1,88 +0,0 @@
-From dd7733da69f198f576d7f52f6bc5a860fe24930d Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Thu, 4 Dec 2014 10:24:02 +0100
-Subject: [PATCH] ARM: BCM5301X: Add DT for Buffalo WZR-600DHP2
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/arm/boot/dts/Makefile | 3 +-
- arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 57 ++++++++++++++++++++++
- 2 files changed, 59 insertions(+), 1 deletion(-)
- create mode 100644 arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -58,7 +58,8 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm4708-buffalo-wzr-1750dhp.dtb \
- bcm4708-netgear-r6250.dtb \
- bcm4708-netgear-r6300-v2.dtb \
-- bcm47081-asus-rt-n18u.dtb
-+ bcm47081-asus-rt-n18u.dtb \
-+ bcm47081-buffalo-wzr-600dhp2.dtb
- dtb-$(CONFIG_ARCH_BCM_63XX) += bcm963138dvt.dtb
- dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm28155-ap.dtb \
- bcm21664-garnet.dtb
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-@@ -0,0 +1,57 @@
-+/*
-+ * Broadcom BCM470X / BCM5301X ARM platform code.
-+ * DTS for Buffalo WZR-600DHP2
-+ *
-+ * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm47081.dtsi"
-+
-+/ {
-+ compatible = "buffalo,wzr-600dhp2", "brcm,bcm47081", "brcm,bcm4708";
-+ model = "Buffalo WZR-600DHP2 (BCM47081)";
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000>;
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ poll-interval = <200>;
-+
-+ aoss {
-+ label = "AOSS";
-+ linux,code = <KEY_WPS_BUTTON>;
-+ gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ restart {
-+ label = "Reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ /* Switch device mode? */
-+ mode {
-+ label = "Mode";
-+ linux,code = <KEY_SETUP>;
-+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ eject {
-+ label = "USB eject";
-+ linux,code = <KEY_EJECTCD>;
-+ gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
diff --git a/target/linux/bcm53xx/patches-3.18/052-ARM-BCM5301X-Add-DT-for-Luxul-XWC-1000.patch b/target/linux/bcm53xx/patches-3.18/052-ARM-BCM5301X-Add-DT-for-Luxul-XWC-1000.patch
deleted file mode 100644
index a82f4d8f22..0000000000
--- a/target/linux/bcm53xx/patches-3.18/052-ARM-BCM5301X-Add-DT-for-Luxul-XWC-1000.patch
+++ /dev/null
@@ -1,89 +0,0 @@
-From e27a09ae9369e10bc589ef4d720ecf4abcbcec50 Mon Sep 17 00:00:00 2001
-From: Dan Haab <dhaab@luxul.com>
-Date: Mon, 19 Jan 2015 12:45:37 -0700
-Subject: [PATCH] ARM: BCM5301X: Add DT for Luxul XWC-1000
-
-Luxul XWC-1000 is a controller device based on BCM4708 SoC. The only
-unusual thing in its DTS file is "ubi" partition on NAND flash.
-
-Signed-off-by: Dan Haab <dhaab@luxul.com>
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts | 60 ++++++++++++++++++++++++++++
- 2 files changed, 61 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -56,6 +56,7 @@ dtb-$(CONFIG_ARCH_AXXIA) += axm5516-amar
- dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
- dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm4708-buffalo-wzr-1750dhp.dtb \
-+ bcm4708-luxul-xwc-1000.dtb \
- bcm4708-netgear-r6250.dtb \
- bcm4708-netgear-r6300-v2.dtb \
- bcm47081-asus-rt-n18u.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-@@ -0,0 +1,60 @@
-+/*
-+ * Broadcom BCM470X / BCM5301X ARM platform code.
-+ * DTS for Luxul XWC-1000
-+ *
-+ * Copyright 2014 Luxul Inc.
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm4708.dtsi"
-+
-+/ {
-+ compatible = "luxul,xwc-1000", "brcm,bcm4708";
-+ model = "Luxul XWC-1000 (BCM4708)";
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000>;
-+ };
-+
-+ axi@18000000 {
-+ nand@28000 {
-+ reg = <0x00028000 0x1000>;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ partition@0 {
-+ label = "ubi";
-+ reg = <0x00000000 0x08000000>;
-+ };
-+ };
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ status {
-+ label = "bcm53xx:green:status";
-+ gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "timer";
-+ };
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ restart {
-+ label = "Reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
diff --git a/target/linux/bcm53xx/patches-3.18/053-ARM-BCM5301X-Drop-unused-poll-interval-from-gpio-key.patch b/target/linux/bcm53xx/patches-3.18/053-ARM-BCM5301X-Drop-unused-poll-interval-from-gpio-key.patch
deleted file mode 100644
index 414aa3ca8c..0000000000
--- a/target/linux/bcm53xx/patches-3.18/053-ARM-BCM5301X-Drop-unused-poll-interval-from-gpio-key.patch
+++ /dev/null
@@ -1,71 +0,0 @@
-From 78b745a4b05c920beaa66dfb140af134b5fc2425 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Wed, 14 Jan 2015 08:20:48 +0100
-Subject: [PATCH] ARM: BCM5301X: Drop unused poll-interval from gpio-keys
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It was accidentally left (& copied & pasted all around) from our
-experiments with gpio-keys-polled.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 1 -
- arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 1 -
- arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts | 1 -
- arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts | 1 -
- arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 1 -
- 5 files changed, 5 deletions(-)
-
---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-@@ -27,7 +27,6 @@
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
-- poll-interval = <200>;
-
- restart {
- label = "Reset";
---- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-@@ -71,7 +71,6 @@
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
-- poll-interval = <200>;
-
- wps {
- label = "WPS";
---- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
-@@ -61,7 +61,6 @@
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
-- poll-interval = <200>;
-
- wps {
- label = "WPS";
---- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
-+++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
-@@ -61,7 +61,6 @@
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
-- poll-interval = <200>;
-
- restart {
- label = "Reset";
---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-@@ -27,7 +27,6 @@
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
-- poll-interval = <200>;
-
- aoss {
- label = "AOSS";
diff --git a/target/linux/bcm53xx/patches-3.18/054-ARM-BCM5301X-Add-LEDs-for-Buffalo-devices.patch b/target/linux/bcm53xx/patches-3.18/054-ARM-BCM5301X-Add-LEDs-for-Buffalo-devices.patch
deleted file mode 100644
index 8e46d39ea5..0000000000
--- a/target/linux/bcm53xx/patches-3.18/054-ARM-BCM5301X-Add-LEDs-for-Buffalo-devices.patch
+++ /dev/null
@@ -1,167 +0,0 @@
-From 8115a4e8d687427fbc1aa3774f50551563bf87f9 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Wed, 14 Jan 2015 08:20:49 +0100
-Subject: [PATCH] ARM: BCM5301X: Add LEDs for Buffalo devices
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 67 ++++++++++++++++++++++
- arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 67 ++++++++++++++++++++++
- 2 files changed, 134 insertions(+)
-
---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-@@ -23,6 +23,73 @@
- reg = <0x00000000 0x08000000>;
- };
-
-+ spi {
-+ compatible = "spi-gpio";
-+ num-chipselects = <1>;
-+ gpio-sck = <&chipcommon 7 0>;
-+ gpio-mosi = <&chipcommon 4 0>;
-+ cs-gpios = <&chipcommon 6 0>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ hc595: gpio_spi@0 {
-+ compatible = "fairchild,74hc595";
-+ reg = <0>;
-+ registers-number = <1>;
-+ spi-max-frequency = <100000>;
-+
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+
-+ };
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ power0 {
-+ label = "bcm53xx:red:power";
-+ gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ power1 {
-+ label = "bcm53xx:white:power";
-+ gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-on";
-+ };
-+
-+ router0 {
-+ label = "bcm53xx:blue:router";
-+ gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-on";
-+ };
-+
-+ router1 {
-+ label = "bcm53xx:amber:router";
-+ gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ wan {
-+ label = "bcm53xx:blue:wan";
-+ gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-on";
-+ };
-+
-+ wireless0 {
-+ label = "bcm53xx:blue:wireless";
-+ gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ wireless1 {
-+ label = "bcm53xx:amber:wireless";
-+ gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-off";
-+ };
-+ };
-+
- gpio-keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-@@ -23,6 +23,73 @@
- reg = <0x00000000 0x08000000>;
- };
-
-+ spi {
-+ compatible = "spi-gpio";
-+ num-chipselects = <1>;
-+ gpio-sck = <&chipcommon 7 0>;
-+ gpio-mosi = <&chipcommon 4 0>;
-+ cs-gpios = <&chipcommon 6 0>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ hc595: gpio_spi@0 {
-+ compatible = "fairchild,74hc595";
-+ reg = <0>;
-+ registers-number = <1>;
-+ spi-max-frequency = <100000>;
-+
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+
-+ };
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ power0 {
-+ label = "bcm53xx:green:power";
-+ gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-on";
-+ };
-+
-+ power1 {
-+ label = "bcm53xx:red:power";
-+ gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ router0 {
-+ label = "bcm53xx:green:router";
-+ gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-on";
-+ };
-+
-+ router1 {
-+ label = "bcm53xx:amber:router";
-+ gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ wan {
-+ label = "bcm53xx:green:wan";
-+ gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-on";
-+ };
-+
-+ wireless0 {
-+ label = "bcm53xx:green:wireless";
-+ gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ wireless1 {
-+ label = "bcm53xx:amber:wireless";
-+ gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-off";
-+ };
-+ };
-+
- gpio-keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
diff --git a/target/linux/bcm53xx/patches-3.18/055-ARM-BCM5301X-Add-DT-for-Buffalo-WZR-900DHP.patch b/target/linux/bcm53xx/patches-3.18/055-ARM-BCM5301X-Add-DT-for-Buffalo-WZR-900DHP.patch
deleted file mode 100644
index b33dd44460..0000000000
--- a/target/linux/bcm53xx/patches-3.18/055-ARM-BCM5301X-Add-DT-for-Buffalo-WZR-900DHP.patch
+++ /dev/null
@@ -1,68 +0,0 @@
-From 5b1864b899d2b591402704dd0f6528c8661f1817 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Tue, 20 Jan 2015 22:42:16 +0100
-Subject: [PATCH] ARM: BCM5301X: Add DT for Buffalo WZR-900DHP
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/arm/boot/dts/Makefile | 3 +-
- arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts | 37 +++++++++++++++++++++++
- 2 files changed, 39 insertions(+), 1 deletion(-)
- create mode 100644 arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -60,7 +60,8 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm4708-netgear-r6250.dtb \
- bcm4708-netgear-r6300-v2.dtb \
- bcm47081-asus-rt-n18u.dtb \
-- bcm47081-buffalo-wzr-600dhp2.dtb
-+ bcm47081-buffalo-wzr-600dhp2.dtb \
-+ bcm47081-buffalo-wzr-900dhp.dtb
- dtb-$(CONFIG_ARCH_BCM_63XX) += bcm963138dvt.dtb
- dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm28155-ap.dtb \
- bcm21664-garnet.dtb
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-@@ -0,0 +1,37 @@
-+/*
-+ * Broadcom BCM470X / BCM5301X ARM platform code.
-+ * DTS for Buffalo WZR-900DHP
-+ *
-+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm47081.dtsi"
-+
-+/ {
-+ compatible = "buffalo,wzr-900dhp", "brcm,bcm47081", "brcm,bcm4708";
-+ model = "Buffalo WZR-900DHP (BCM47081)";
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000>;
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ restart {
-+ label = "Reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
diff --git a/target/linux/bcm53xx/patches-3.18/056-ARM-BCM5301X-Add-DT-for-Netgear-R8000.patch b/target/linux/bcm53xx/patches-3.18/056-ARM-BCM5301X-Add-DT-for-Netgear-R8000.patch
deleted file mode 100644
index 7508161859..0000000000
--- a/target/linux/bcm53xx/patches-3.18/056-ARM-BCM5301X-Add-DT-for-Netgear-R8000.patch
+++ /dev/null
@@ -1,109 +0,0 @@
-From 4076b521cb50c411467c4ba65f82ef0079823357 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Wed, 18 Feb 2015 12:25:42 +0100
-Subject: [PATCH] ARM: BCM5301X: Add DT for Netgear R8000
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Reported-by: Ian Kent <raven@themaw.net>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/Makefile | 3 +-
- arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 77 +++++++++++++++++++++++++++++
- 2 files changed, 79 insertions(+), 1 deletion(-)
- create mode 100644 arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -61,7 +61,8 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm4708-netgear-r6300-v2.dtb \
- bcm47081-asus-rt-n18u.dtb \
- bcm47081-buffalo-wzr-600dhp2.dtb \
-- bcm47081-buffalo-wzr-900dhp.dtb
-+ bcm47081-buffalo-wzr-900dhp.dtb \
-+ bcm4709-netgear-r8000.dtb
- dtb-$(CONFIG_ARCH_BCM_63XX) += bcm963138dvt.dtb
- dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm28155-ap.dtb \
- bcm21664-garnet.dtb
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-@@ -0,0 +1,77 @@
-+/*
-+ * Broadcom BCM470X / BCM5301X ARM platform code.
-+ * DTS for Netgear R8000
-+ *
-+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm4708.dtsi"
-+
-+/ {
-+ compatible = "netgear,r8000", "brcm,bcm4709", "brcm,bcm4708";
-+ model = "Netgear R8000 (BCM4709)";
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000>;
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ power0 {
-+ label = "bcm53xx:white:power";
-+ gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-on";
-+ };
-+
-+ power1 {
-+ label = "bcm53xx:amber:power";
-+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ 5ghz-1 {
-+ label = "bcm53xx:white:5ghz-1";
-+ gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ 2ghz {
-+ label = "bcm53xx:white:2ghz";
-+ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ rfkill {
-+ label = "WiFi";
-+ linux,code = <KEY_RFKILL>;
-+ gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ wps {
-+ label = "WPS";
-+ linux,code = <KEY_WPS_BUTTON>;
-+ gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ restart {
-+ label = "Reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
diff --git a/target/linux/bcm53xx/patches-3.18/057-ARM-BCM5301X-Fix-default-state-of-power-LEDs-on-Netg.patch b/target/linux/bcm53xx/patches-3.18/057-ARM-BCM5301X-Fix-default-state-of-power-LEDs-on-Netg.patch
deleted file mode 100644
index f719f35c20..0000000000
--- a/target/linux/bcm53xx/patches-3.18/057-ARM-BCM5301X-Fix-default-state-of-power-LEDs-on-Netg.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From 7875b470c9d80dff2d58ae9692adb3a2b5814a89 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Fri, 20 Feb 2015 11:22:05 +0100
-Subject: [PATCH] ARM: BCM5301X: Fix default state of power LEDs on Netgear
- R6250
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-We want green LED to be enabled by default.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-@@ -45,13 +45,13 @@
- power0 {
- label = "bcm53xx:green:power";
- gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
-+ linux,default-trigger = "default-on";
- };
-
- power1 {
- label = "bcm53xx:amber:power";
- gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-on";
-+ linux,default-trigger = "default-off";
- };
-
- usb {
diff --git a/target/linux/bcm53xx/patches-3.18/058-ARM-BCM5301X-Add-USB-LED-for-Buffalo-WZR-1750DHP.patch b/target/linux/bcm53xx/patches-3.18/058-ARM-BCM5301X-Add-USB-LED-for-Buffalo-WZR-1750DHP.patch
deleted file mode 100644
index 290ea0aea9..0000000000
--- a/target/linux/bcm53xx/patches-3.18/058-ARM-BCM5301X-Add-USB-LED-for-Buffalo-WZR-1750DHP.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From 35ad0e50bd6683c6699586e3bd5045f0695586d9 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@openwrt.org>
-Date: Wed, 13 May 2015 09:10:51 +0200
-Subject: [PATCH] ARM: BCM5301X: Add USB LED for Buffalo WZR-1750DHP
-
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-@@ -47,6 +47,12 @@
- leds {
- compatible = "gpio-leds";
-
-+ usb {
-+ label = "bcm53xx:blue:usb";
-+ gpios = <&hc595 0 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-off";
-+ };
-+
- power0 {
- label = "bcm53xx:red:power";
- gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
diff --git a/target/linux/bcm53xx/patches-3.18/059-ARM-BCM5301X-Add-DT-for-Buffalo-WXR-1900DHP.patch b/target/linux/bcm53xx/patches-3.18/059-ARM-BCM5301X-Add-DT-for-Buffalo-WXR-1900DHP.patch
deleted file mode 100644
index 4bf5e0491c..0000000000
--- a/target/linux/bcm53xx/patches-3.18/059-ARM-BCM5301X-Add-DT-for-Buffalo-WXR-1900DHP.patch
+++ /dev/null
@@ -1,157 +0,0 @@
-From 35eecd10ee57b9d4f31e12598296b235ed2b34ae Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@openwrt.org>
-Date: Wed, 13 May 2015 09:10:52 +0200
-Subject: [PATCH] ARM: BCM5301X: Add DT for Buffalo WXR-1900DHP
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 127 ++++++++++++++++++++++
- 2 files changed, 128 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -62,6 +62,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm47081-asus-rt-n18u.dtb \
- bcm47081-buffalo-wzr-600dhp2.dtb \
- bcm47081-buffalo-wzr-900dhp.dtb \
-+ bcm4709-buffalo-wxr-1900dhp.dtb \
- bcm4709-netgear-r8000.dtb
- dtb-$(CONFIG_ARCH_BCM_63XX) += bcm963138dvt.dtb
- dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm28155-ap.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-@@ -0,0 +1,127 @@
-+/*
-+ * Broadcom BCM470X / BCM5301X ARM platform code.
-+ * DTS for Buffalo WXR-1900DHP
-+ *
-+ * Copyright (C) 2015 Felix Fietkau <nbd@openwrt.org>
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm4708.dtsi"
-+
-+/ {
-+ compatible = "buffalo,wxr-1900dhp", "brcm,bcm4709", "brcm,bcm4708";
-+ model = "Buffalo WXR-1900DHP";
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000>;
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ usb {
-+ label = "bcm53xx:green:usb";
-+ gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ power-amber {
-+ label = "bcm53xx:amber:power";
-+ gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ power-white {
-+ label = "bcm53xx:white:power";
-+ gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-on";
-+ };
-+
-+ router-amber {
-+ label = "bcm53xx:amber:router";
-+ gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ router-white {
-+ label = "bcm53xx:white:router";
-+ gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ wan-amber {
-+ label = "bcm53xx:amber:wan";
-+ gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ wan-white {
-+ label = "bcm53xx:white:wan";
-+ gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ wireless-amber {
-+ label = "bcm53xx:amber:wireless";
-+ gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ wireless-white {
-+ label = "bcm53xx:white:wireless";
-+ gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-off";
-+ };
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ power {
-+ label = "Power";
-+ linux,code = <KEY_POWER>;
-+ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ restart {
-+ label = "Reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ aoss {
-+ label = "AOSS";
-+ linux,code = <KEY_WPS_BUTTON>;
-+ gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ /* Commit mode set by switch? */
-+ mode {
-+ label = "Mode";
-+ linux,code = <KEY_SETUP>;
-+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ /* Switch: AP mode */
-+ sw_ap {
-+ label = "AP";
-+ linux,code = <BTN_0>;
-+ gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ eject {
-+ label = "USB eject";
-+ linux,code = <KEY_EJECTCD>;
-+ gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
diff --git a/target/linux/bcm53xx/patches-3.18/060-ARM-BCM5301X-Add-DT-for-SmartRG-SR400ac.patch b/target/linux/bcm53xx/patches-3.18/060-ARM-BCM5301X-Add-DT-for-SmartRG-SR400ac.patch
deleted file mode 100644
index 2213d3b76e..0000000000
--- a/target/linux/bcm53xx/patches-3.18/060-ARM-BCM5301X-Add-DT-for-SmartRG-SR400ac.patch
+++ /dev/null
@@ -1,148 +0,0 @@
-From 691917f20cae813d242f7123a4dc97e7d48e6ff1 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Wed, 13 May 2015 09:10:53 +0200
-Subject: [PATCH] ARM: BCM5301X: Add DT for SmartRG SR400ac
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 119 ++++++++++++++++++++++++++
- 2 files changed, 120 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -59,6 +59,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm4708-luxul-xwc-1000.dtb \
- bcm4708-netgear-r6250.dtb \
- bcm4708-netgear-r6300-v2.dtb \
-+ bcm4708-smartrg-sr400ac.dtb \
- bcm47081-asus-rt-n18u.dtb \
- bcm47081-buffalo-wzr-600dhp2.dtb \
- bcm47081-buffalo-wzr-900dhp.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
-@@ -0,0 +1,119 @@
-+/*
-+ * Broadcom BCM470X / BCM5301X arm platform code.
-+ * DTS for SmartRG SR400ac
-+ *
-+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm4708.dtsi"
-+
-+/ {
-+ compatible = "smartrg,sr400ac", "brcm,bcm4708";
-+ model = "SmartRG SR400ac";
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000>;
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ power-white {
-+ label = "bcm53xx:white:power";
-+ gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-on";
-+ };
-+
-+ power-amber {
-+ label = "bcm53xx:amber:power";
-+ gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ usb2 {
-+ label = "bcm53xx:white:usb2";
-+ gpios = <&chipcommon 3 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ usb3-white {
-+ label = "bcm53xx:white:usb3";
-+ gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ usb3-green {
-+ label = "bcm53xx:green:usb3";
-+ gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ wps {
-+ label = "bcm53xx:white:wps";
-+ gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ status-red {
-+ label = "bcm53xx:red:status";
-+ gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ status-green {
-+ label = "bcm53xx:green:status";
-+ gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ status-blue {
-+ label = "bcm53xx:blue:status";
-+ gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ wan-white {
-+ label = "bcm53xx:white:wan";
-+ gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ wan-red {
-+ label = "bcm53xx:red:wan";
-+ gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-off";
-+ };
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ rfkill {
-+ label = "WiFi";
-+ linux,code = <KEY_RFKILL>;
-+ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ wps {
-+ label = "WPS";
-+ linux,code = <KEY_WPS_BUTTON>;
-+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ restart {
-+ label = "Reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
diff --git a/target/linux/bcm53xx/patches-3.18/061-ARM-BCM5301X-Add-DT-for-Asus-RT-AC68U.patch b/target/linux/bcm53xx/patches-3.18/061-ARM-BCM5301X-Add-DT-for-Asus-RT-AC68U.patch
deleted file mode 100644
index 77ae2f7056..0000000000
--- a/target/linux/bcm53xx/patches-3.18/061-ARM-BCM5301X-Add-DT-for-Asus-RT-AC68U.patch
+++ /dev/null
@@ -1,112 +0,0 @@
-From b5f350c790ae6aaf3dda5a825d7e3fdeed731164 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Sat, 28 Mar 2015 15:01:38 +0100
-Subject: [PATCH] ARM: BCM5301X: Add DT for Asus RT-AC68U
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts | 83 +++++++++++++++++++++++++++++
- 2 files changed, 84 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -55,6 +55,7 @@ dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.
- dtb-$(CONFIG_ARCH_AXXIA) += axm5516-amarillo.dtb
- dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
- dtb-$(CONFIG_ARCH_BCM_5301X) += \
-+ bcm4708-asus-rt-ac68u.dtb \
- bcm4708-buffalo-wzr-1750dhp.dtb \
- bcm4708-luxul-xwc-1000.dtb \
- bcm4708-netgear-r6250.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
-@@ -0,0 +1,83 @@
-+/*
-+ * Broadcom BCM470X / BCM5301X ARM platform code.
-+ * DTS for Asus RT-AC68U
-+ *
-+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm4708.dtsi"
-+
-+/ {
-+ compatible = "asus,rt-ac68u", "brcm,bcm4708";
-+ model = "Asus RT-AC68U (BCM4708)";
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000>;
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ usb2 {
-+ label = "bcm53xx:blue:usb2";
-+ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ power {
-+ label = "bcm53xx:blue:power";
-+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-on";
-+ };
-+
-+ logo {
-+ label = "bcm53xx:white:logo";
-+ gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-on";
-+ };
-+
-+ usb3 {
-+ label = "bcm53xx:blue:usb3";
-+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ brightness {
-+ label = "Backlight";
-+ linux,code = <KEY_BRIGHTNESS_ZERO>;
-+ gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ wps {
-+ label = "WPS";
-+ linux,code = <KEY_WPS_BUTTON>;
-+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ restart {
-+ label = "Reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ rfkill {
-+ label = "WiFi";
-+ linux,code = <KEY_RFKILL>;
-+ gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
diff --git a/target/linux/bcm53xx/patches-3.18/062-ARM-BCM5301X-Add-DT-for-Asus-RT-AC56U.patch b/target/linux/bcm53xx/patches-3.18/062-ARM-BCM5301X-Add-DT-for-Asus-RT-AC56U.patch
deleted file mode 100644
index 58e33e0598..0000000000
--- a/target/linux/bcm53xx/patches-3.18/062-ARM-BCM5301X-Add-DT-for-Asus-RT-AC56U.patch
+++ /dev/null
@@ -1,125 +0,0 @@
-From 16dc3bac722252a10e396546f44135ae1b6a7ff3 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Tue, 31 Mar 2015 17:29:18 +0200
-Subject: [PATCH] ARM: BCM5301X: Add DT for Asus RT-AC56U
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts | 96 +++++++++++++++++++++++++++++
- 2 files changed, 97 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -55,6 +55,7 @@ dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.
- dtb-$(CONFIG_ARCH_AXXIA) += axm5516-amarillo.dtb
- dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
- dtb-$(CONFIG_ARCH_BCM_5301X) += \
-+ bcm4708-asus-rt-ac56u.dtb \
- bcm4708-asus-rt-ac68u.dtb \
- bcm4708-buffalo-wzr-1750dhp.dtb \
- bcm4708-luxul-xwc-1000.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
-@@ -0,0 +1,96 @@
-+/*
-+ * Broadcom BCM470X / BCM5301X ARM platform code.
-+ * DTS for Asus RT-AC56U
-+ *
-+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm4708.dtsi"
-+
-+/ {
-+ compatible = "asus,rt-ac56u", "brcm,bcm4708";
-+ model = "Asus RT-AC56U (BCM4708)";
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000>;
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ usb3 {
-+ label = "bcm53xx:blue:usb3";
-+ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ wan {
-+ label = "bcm53xx:blue:wan";
-+ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ lan {
-+ label = "bcm53xx:blue:lan";
-+ gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ power {
-+ label = "bcm53xx:blue:power";
-+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-on";
-+ };
-+
-+ all {
-+ label = "bcm53xx:blue:all";
-+ gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-on";
-+ };
-+
-+ 2ghz {
-+ label = "bcm53xx:blue:2ghz";
-+ gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+
-+ usb2 {
-+ label = "bcm53xx:blue:usb2";
-+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ rfkill {
-+ label = "WiFi";
-+ linux,code = <KEY_RFKILL>;
-+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ restart {
-+ label = "Reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ wps {
-+ label = "WPS";
-+ linux,code = <KEY_WPS_BUTTON>;
-+ gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
diff --git a/target/linux/bcm53xx/patches-3.18/063-ARM-BCM5301X-Ignore-another-BCM4709-specific-fault-c.patch b/target/linux/bcm53xx/patches-3.18/063-ARM-BCM5301X-Ignore-another-BCM4709-specific-fault-c.patch
deleted file mode 100644
index 8716a0d5c6..0000000000
--- a/target/linux/bcm53xx/patches-3.18/063-ARM-BCM5301X-Ignore-another-BCM4709-specific-fault-c.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From 7eb68a2a0519a77b93184c695d4d293c92dc2286 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Wed, 11 Feb 2015 16:40:58 +0100
-Subject: [PATCH] ARM: BCM5301X: Ignore another (BCM4709 specific) fault code
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Broadcom ARM devices seem to generate some fault once per boot. We
-already have an ignoring handler for BCM4707/BCM4708, but BCM4709
-generates different code.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/mach-bcm/bcm_5301x.c | 9 +++++----
- 1 file changed, 5 insertions(+), 4 deletions(-)
-
---- a/arch/arm/mach-bcm/bcm_5301x.c
-+++ b/arch/arm/mach-bcm/bcm_5301x.c
-@@ -18,15 +18,16 @@ static bool first_fault = true;
- static int bcm5301x_abort_handler(unsigned long addr, unsigned int fsr,
- struct pt_regs *regs)
- {
-- if (fsr == 0x1c06 && first_fault) {
-+ if ((fsr == 0x1406 || fsr == 0x1c06) && first_fault) {
- first_fault = false;
-
- /*
-- * These faults with code 0x1c06 happens for no good reason,
-- * possibly left over from the CFE boot loader.
-+ * These faults with codes 0x1406 (BCM4709) or 0x1c06 happens
-+ * for no good reason, possibly left over from the CFE boot
-+ * loader.
- */
- pr_warn("External imprecise Data abort at addr=%#lx, fsr=%#x ignored.\n",
-- addr, fsr);
-+ addr, fsr);
-
- /* Returning non-zero causes fault display and panic */
- return 0;
diff --git a/target/linux/bcm53xx/patches-3.18/064-ARM-BCM5301X-add-NAND-flash-chip-description.patch b/target/linux/bcm53xx/patches-3.18/064-ARM-BCM5301X-add-NAND-flash-chip-description.patch
deleted file mode 100644
index aa99f3758c..0000000000
--- a/target/linux/bcm53xx/patches-3.18/064-ARM-BCM5301X-add-NAND-flash-chip-description.patch
+++ /dev/null
@@ -1,210 +0,0 @@
-From 9faa5960eef3204cae6637b530f5e23e53b5a9ef Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Fri, 29 May 2015 23:39:47 +0200
-Subject: [PATCH] ARM: BCM5301X: add NAND flash chip description
-
-This adds the NAND flash chip description for a standard chip found
-connected to this SoC. This makes use of generic Broadcom NAND driver
-with the iProc interface.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts | 1 +
- arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts | 1 +
- arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 1 +
- arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts | 9 +++-----
- arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 1 +
- arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts | 1 +
- arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 1 +
- arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts | 1 +
- arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 1 +
- arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts | 1 +
- arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 1 +
- arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 1 +
- arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi | 24 ++++++++++++++++++++++
- arch/arm/boot/dts/bcm5301x.dtsi | 12 +++++++++++
- 14 files changed, 50 insertions(+), 6 deletions(-)
- create mode 100644 arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi
-
---- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
-+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
-@@ -10,6 +10,7 @@
- /dts-v1/;
-
- #include "bcm4708.dtsi"
-+#include "bcm5301x-nand-cs0-bch8.dtsi"
-
- / {
- compatible = "asus,rt-ac56u", "brcm,bcm4708";
---- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
-+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
-@@ -10,6 +10,7 @@
- /dts-v1/;
-
- #include "bcm4708.dtsi"
-+#include "bcm5301x-nand-cs0-bch8.dtsi"
-
- / {
- compatible = "asus,rt-ac68u", "brcm,bcm4708";
---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-@@ -10,6 +10,7 @@
- /dts-v1/;
-
- #include "bcm4708.dtsi"
-+#include "bcm5301x-nand-cs0-bch8.dtsi"
-
- / {
- compatible = "buffalo,wzr-1750dhp", "brcm,bcm4708";
---- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-@@ -10,6 +10,7 @@
- /dts-v1/;
-
- #include "bcm4708.dtsi"
-+#include "bcm5301x-nand-cs0-bch8.dtsi"
-
- / {
- compatible = "luxul,xwc-1000", "brcm,bcm4708";
-@@ -23,12 +24,8 @@
- reg = <0x00000000 0x08000000>;
- };
-
-- axi@18000000 {
-- nand@28000 {
-- reg = <0x00028000 0x1000>;
-- #address-cells = <1>;
-- #size-cells = <1>;
--
-+ nand: nand@18028000 {
-+ nandcs@0 {
- partition@0 {
- label = "ubi";
- reg = <0x00000000 0x08000000>;
---- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-@@ -10,6 +10,7 @@
- /dts-v1/;
-
- #include "bcm4708.dtsi"
-+#include "bcm5301x-nand-cs0-bch8.dtsi"
-
- / {
- compatible = "netgear,r6250v1", "brcm,bcm4708";
---- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
-@@ -10,6 +10,7 @@
- /dts-v1/;
-
- #include "bcm4708.dtsi"
-+#include "bcm5301x-nand-cs0-bch8.dtsi"
-
- / {
- compatible = "netgear,r6300v2", "brcm,bcm4708";
---- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
-+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
-@@ -10,6 +10,7 @@
- /dts-v1/;
-
- #include "bcm4708.dtsi"
-+#include "bcm5301x-nand-cs0-bch8.dtsi"
-
- / {
- compatible = "smartrg,sr400ac", "brcm,bcm4708";
---- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
-+++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
-@@ -10,6 +10,7 @@
- /dts-v1/;
-
- #include "bcm47081.dtsi"
-+#include "bcm5301x-nand-cs0-bch8.dtsi"
-
- / {
- compatible = "asus,rt-n18u", "brcm,bcm47081", "brcm,bcm4708";
---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-@@ -10,6 +10,7 @@
- /dts-v1/;
-
- #include "bcm47081.dtsi"
-+#include "bcm5301x-nand-cs0-bch8.dtsi"
-
- / {
- compatible = "buffalo,wzr-600dhp2", "brcm,bcm47081", "brcm,bcm4708";
---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-@@ -10,6 +10,7 @@
- /dts-v1/;
-
- #include "bcm47081.dtsi"
-+#include "bcm5301x-nand-cs0-bch8.dtsi"
-
- / {
- compatible = "buffalo,wzr-900dhp", "brcm,bcm47081", "brcm,bcm4708";
---- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-@@ -10,6 +10,7 @@
- /dts-v1/;
-
- #include "bcm4708.dtsi"
-+#include "bcm5301x-nand-cs0-bch8.dtsi"
-
- / {
- compatible = "buffalo,wxr-1900dhp", "brcm,bcm4709", "brcm,bcm4708";
---- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-@@ -10,6 +10,7 @@
- /dts-v1/;
-
- #include "bcm4708.dtsi"
-+#include "bcm5301x-nand-cs0-bch8.dtsi"
-
- / {
- compatible = "netgear,r8000", "brcm,bcm4709", "brcm,bcm4708";
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi
-@@ -0,0 +1,24 @@
-+/*
-+ * Broadcom BCM470X / BCM5301X Nand chip defaults.
-+ *
-+ * This should be included if the NAND controller is on chip select 0
-+ * and uses 8 bit ECC.
-+ *
-+ * Copyright (C) 2015 Hauke Mehrtens <hauke@hauke-m.de>
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+/ {
-+ nand@18028000 {
-+ nandcs@0 {
-+ compatible = "brcm,nandcs";
-+ reg = <0>;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ nand-ecc-strength = <8>;
-+ nand-ecc-step-size = <512>;
-+ };
-+ };
-+};
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -143,4 +143,16 @@
- #gpio-cells = <2>;
- };
- };
-+
-+ nand: nand@18028000 {
-+ compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand";
-+ reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>;
-+ reg-names = "nand", "iproc-idm", "iproc-ext";
-+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
-+
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ brcm,nand-has-wp;
-+ };
- };
diff --git a/target/linux/bcm53xx/patches-3.18/065-ARM-BCM5301X-add-IRQ-numbers-for-PCIe-controller.patch b/target/linux/bcm53xx/patches-3.18/065-ARM-BCM5301X-add-IRQ-numbers-for-PCIe-controller.patch
deleted file mode 100644
index 142211520e..0000000000
--- a/target/linux/bcm53xx/patches-3.18/065-ARM-BCM5301X-add-IRQ-numbers-for-PCIe-controller.patch
+++ /dev/null
@@ -1,48 +0,0 @@
-From 1f80de6863ca0e36cabc622e858168fe5beb1e92 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sun, 24 May 2015 21:08:14 +0200
-Subject: [PATCH] ARM: BCM5301X: add IRQ numbers for PCIe controller
-
-The driver for the PCIe controller was just added, this adds the
-missing definition of the IRQ numbers to device tree. The driver itself
-will be automatically detected by bcma.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm5301x.dtsi | 24 ++++++++++++++++++++++++
- 1 file changed, 24 insertions(+)
-
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -108,6 +108,30 @@
- /* ChipCommon */
- <0x00000000 0 &gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
-
-+ /* PCIe Controller 0 */
-+ <0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00012000 2 &gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00012000 3 &gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00012000 4 &gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00012000 5 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-+
-+ /* PCIe Controller 1 */
-+ <0x00013000 0 &gic GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00013000 1 &gic GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00013000 2 &gic GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00013000 3 &gic GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00013000 4 &gic GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00013000 5 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
-+
-+ /* PCIe Controller 2 */
-+ <0x00014000 0 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00014000 1 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00014000 2 &gic GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00014000 3 &gic GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00014000 4 &gic GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00014000 5 &gic GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
-+
- /* USB 2.0 Controller */
- <0x00021000 0 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
-
diff --git a/target/linux/bcm53xx/patches-3.18/066-ARM-BCM5301X-Add-DT-for-Asus-RT-AC87U.patch b/target/linux/bcm53xx/patches-3.18/066-ARM-BCM5301X-Add-DT-for-Asus-RT-AC87U.patch
deleted file mode 100644
index 463e42df56..0000000000
--- a/target/linux/bcm53xx/patches-3.18/066-ARM-BCM5301X-Add-DT-for-Asus-RT-AC87U.patch
+++ /dev/null
@@ -1,95 +0,0 @@
-From 26343bdacfcdbf6ee3303d6078a015b908f90193 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Sat, 16 May 2015 16:55:39 +0200
-Subject: [PATCH] ARM: BCM5301X: Add DT for Asus RT-AC87U
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts | 65 +++++++++++++++++++++++++++++
- 2 files changed, 66 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -65,6 +65,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm47081-asus-rt-n18u.dtb \
- bcm47081-buffalo-wzr-600dhp2.dtb \
- bcm47081-buffalo-wzr-900dhp.dtb \
-+ bcm4709-asus-rt-ac87u.dtb \
- bcm4709-buffalo-wxr-1900dhp.dtb \
- bcm4709-netgear-r8000.dtb
- dtb-$(CONFIG_ARCH_BCM_63XX) += bcm963138dvt.dtb
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-@@ -0,0 +1,65 @@
-+/*
-+ * Broadcom BCM470X / BCM5301X ARM platform code.
-+ * DTS for Asus RT-AC87U
-+ *
-+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm4708.dtsi"
-+
-+/ {
-+ compatible = "asus,rt-ac87u", "brcm,bcm4709", "brcm,bcm4708";
-+ model = "Asus RT-AC87U";
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000>;
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ wps {
-+ label = "bcm53xx:blue:wps";
-+ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ power {
-+ label = "bcm53xx:blue:power";
-+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-on";
-+ };
-+
-+ wan {
-+ label = "bcm53xx:red:wan";
-+ gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ wps {
-+ label = "WPS";
-+ linux,code = <KEY_WPS_BUTTON>;
-+ gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ restart {
-+ label = "Reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
diff --git a/target/linux/bcm53xx/patches-3.18/067-ARM-BCM5301X-Enable-UART0-on-tested-devices.patch b/target/linux/bcm53xx/patches-3.18/067-ARM-BCM5301X-Enable-UART0-on-tested-devices.patch
deleted file mode 100644
index ce69cca473..0000000000
--- a/target/linux/bcm53xx/patches-3.18/067-ARM-BCM5301X-Enable-UART0-on-tested-devices.patch
+++ /dev/null
@@ -1,83 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Mon, 29 Jun 2015 07:22:16 +0200
-Subject: [PATCH] ARM: BCM5301X: Enable UART0 on tested devices
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-There are two possible UARTs so we have (both of) them disabled by
-default. Override uart0 status on devices that were verified to use it.
-In case of Netgear R6250 also drop an old (and invalid) overwrite. It
-doesn't have uart1 connected.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-@@ -135,3 +135,7 @@
- };
- };
- };
-+
-+&uart0 {
-+ status = "okay";
-+};
---- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-@@ -55,3 +55,7 @@
- };
- };
- };
-+
-+&uart0 {
-+ status = "okay";
-+};
---- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-@@ -24,16 +24,6 @@
- reg = <0x00000000 0x08000000>;
- };
-
-- chipcommonA {
-- uart0: serial@0300 {
-- status = "okay";
-- };
--
-- uart1: serial@0400 {
-- status = "okay";
-- };
-- };
--
- leds {
- compatible = "gpio-leds";
-
-@@ -92,3 +82,7 @@
- };
- };
- };
-+
-+&uart0 {
-+ status = "okay";
-+};
---- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
-+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
-@@ -118,3 +118,7 @@
- };
- };
- };
-+
-+&uart0 {
-+ status = "okay";
-+};
---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-@@ -122,3 +122,7 @@
- };
- };
- };
-+
-+&uart0 {
-+ status = "okay";
-+};
diff --git a/target/linux/bcm53xx/patches-3.18/068-ARM-BCM5301X-Add-profiling-support.patch b/target/linux/bcm53xx/patches-3.18/068-ARM-BCM5301X-Add-profiling-support.patch
deleted file mode 100644
index afd1ce6959..0000000000
--- a/target/linux/bcm53xx/patches-3.18/068-ARM-BCM5301X-Add-profiling-support.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From: Felix Fietkau <nbd@openwrt.org>
-Date: Wed, 29 Jul 2015 23:51:00 +0200
-Subject: [PATCH] ARM: BCM5301X: Add profiling support
-
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Olof Johansson <olof@lixom.net>
----
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -82,6 +82,13 @@
- };
- };
-
-+ pmu {
-+ compatible = "arm,cortex-a9-pmu";
-+ interrupts =
-+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-+ };
-+
- clocks {
- #address-cells = <1>;
- #size-cells = <0>;
diff --git a/target/linux/bcm53xx/patches-3.18/069-ARM-BCM5301X-Add-DT-for-Netgear-R7000.patch b/target/linux/bcm53xx/patches-3.18/069-ARM-BCM5301X-Add-DT-for-Netgear-R7000.patch
deleted file mode 100644
index 22688716a0..0000000000
--- a/target/linux/bcm53xx/patches-3.18/069-ARM-BCM5301X-Add-DT-for-Netgear-R7000.patch
+++ /dev/null
@@ -1,128 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Wed, 26 Aug 2015 16:11:38 +0200
-Subject: [PATCH] ARM: BCM5301X: Add DT for Netgear R7000
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -67,6 +67,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm47081-buffalo-wzr-900dhp.dtb \
- bcm4709-asus-rt-ac87u.dtb \
- bcm4709-buffalo-wxr-1900dhp.dtb \
-+ bcm4709-netgear-r7000.dtb \
- bcm4709-netgear-r8000.dtb
- dtb-$(CONFIG_ARCH_BCM_63XX) += bcm963138dvt.dtb
- dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm28155-ap.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
-@@ -0,0 +1,106 @@
-+/*
-+ * Broadcom BCM470X / BCM5301X ARM platform code.
-+ * DTS for Netgear R7000
-+ *
-+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm4708.dtsi"
-+#include "bcm5301x-nand-cs0-bch8.dtsi"
-+
-+/ {
-+ compatible = "netgear,r7000", "brcm,bcm4709", "brcm,bcm4708";
-+ model = "Netgear R7000";
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000>;
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ power-white {
-+ label = "bcm53xx:white:power";
-+ gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-on";
-+ };
-+
-+ power-amber {
-+ label = "bcm53xx:amber:power";
-+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ 5ghz {
-+ label = "bcm53xx:white:5ghz";
-+ gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ 2ghz {
-+ label = "bcm53xx:white:2ghz";
-+ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ wps {
-+ label = "bcm53xx:white:wps";
-+ gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ wireless {
-+ label = "bcm53xx:white:wireless";
-+ gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ usb3 {
-+ label = "bcm53xx:white:usb3";
-+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ usb2 {
-+ label = "bcm53xx:white:usb2";
-+ gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ wps {
-+ label = "WPS";
-+ linux,code = <KEY_WPS_BUTTON>;
-+ gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ rfkill {
-+ label = "WiFi";
-+ linux,code = <KEY_RFKILL>;
-+ gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ restart {
-+ label = "Reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
-+
-+&uart0 {
-+ status = "okay";
-+};
diff --git a/target/linux/bcm53xx/patches-3.18/080-watchdog-bcm47xx_wdt.c-add-restart-handler-support.patch b/target/linux/bcm53xx/patches-3.18/080-watchdog-bcm47xx_wdt.c-add-restart-handler-support.patch
deleted file mode 100644
index 76123e972a..0000000000
--- a/target/linux/bcm53xx/patches-3.18/080-watchdog-bcm47xx_wdt.c-add-restart-handler-support.patch
+++ /dev/null
@@ -1,74 +0,0 @@
-From 823769d2e6622a48276bee35b2dad5ba77cbdc25 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Sun, 25 Jan 2015 11:40:57 +0100
-Subject: [PATCH] watchdog: bcm47xx_wdt.c: add restart handler support
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Just like in case of other watchdog drivers, use the new kernel core
-API to provide restart support.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Reviewed-by: Guenter Roeck <linux@roeck-us.net>
-Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
----
- drivers/watchdog/bcm47xx_wdt.c | 21 ++++++++++++++++++++-
- include/linux/bcm47xx_wdt.h | 1 +
- 2 files changed, 21 insertions(+), 1 deletion(-)
-
---- a/drivers/watchdog/bcm47xx_wdt.c
-+++ b/drivers/watchdog/bcm47xx_wdt.c
-@@ -169,6 +169,17 @@ static int bcm47xx_wdt_notify_sys(struct
- return NOTIFY_DONE;
- }
-
-+static int bcm47xx_wdt_restart(struct notifier_block *this, unsigned long mode,
-+ void *cmd)
-+{
-+ struct bcm47xx_wdt *wdt;
-+
-+ wdt = container_of(this, struct bcm47xx_wdt, restart_handler);
-+ wdt->timer_set(wdt, 1);
-+
-+ return NOTIFY_DONE;
-+}
-+
- static struct watchdog_ops bcm47xx_wdt_soft_ops = {
- .owner = THIS_MODULE,
- .start = bcm47xx_wdt_soft_start,
-@@ -209,15 +220,23 @@ static int bcm47xx_wdt_probe(struct plat
- if (ret)
- goto err_timer;
-
-- ret = watchdog_register_device(&wdt->wdd);
-+ wdt->restart_handler.notifier_call = &bcm47xx_wdt_restart;
-+ wdt->restart_handler.priority = 64;
-+ ret = register_restart_handler(&wdt->restart_handler);
- if (ret)
- goto err_notifier;
-
-+ ret = watchdog_register_device(&wdt->wdd);
-+ if (ret)
-+ goto err_handler;
-+
- dev_info(&pdev->dev, "BCM47xx Watchdog Timer enabled (%d seconds%s%s)\n",
- timeout, nowayout ? ", nowayout" : "",
- soft ? ", Software Timer" : "");
- return 0;
-
-+err_handler:
-+ unregister_restart_handler(&wdt->restart_handler);
- err_notifier:
- unregister_reboot_notifier(&wdt->notifier);
- err_timer:
---- a/include/linux/bcm47xx_wdt.h
-+++ b/include/linux/bcm47xx_wdt.h
-@@ -16,6 +16,7 @@ struct bcm47xx_wdt {
-
- struct watchdog_device wdd;
- struct notifier_block notifier;
-+ struct notifier_block restart_handler;
-
- struct timer_list soft_timer;
- atomic_t soft_ticks;
diff --git a/target/linux/bcm53xx/patches-3.18/081-watchdog-bcm47xx_wdt.c-allow-enabling-on-BCM5301X-ar.patch b/target/linux/bcm53xx/patches-3.18/081-watchdog-bcm47xx_wdt.c-allow-enabling-on-BCM5301X-ar.patch
deleted file mode 100644
index 65a876d864..0000000000
--- a/target/linux/bcm53xx/patches-3.18/081-watchdog-bcm47xx_wdt.c-allow-enabling-on-BCM5301X-ar.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From b08c144e3a1089cdb725e393fa4f68f83a73e31b Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Sat, 7 Feb 2015 18:04:10 +0100
-Subject: [PATCH] watchdog: bcm47xx_wdt.c: allow enabling on BCM5301X arch
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM5301X (ARCH_BCM_5301X) is a new Broadcom architecture using the same
-SoC bus driver (bcma) as BCM47XX but based on ARM instead of MIPS.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Reviewed-by: Guenter Roeck <linux@roeck-us.net>
-Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
----
- drivers/watchdog/Kconfig | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -1101,7 +1101,7 @@ config ATH79_WDT
-
- config BCM47XX_WDT
- tristate "Broadcom BCM47xx Watchdog Timer"
-- depends on BCM47XX
-+ depends on BCM47XX || ARCH_BCM_5301X
- select WATCHDOG_CORE
- help
- Hardware driver for the Broadcom BCM47xx Watchdog Timer.
diff --git a/target/linux/bcm53xx/patches-3.18/110-firmware-backport-NVRAM-driver.patch b/target/linux/bcm53xx/patches-3.18/110-firmware-backport-NVRAM-driver.patch
deleted file mode 100644
index dbff6cc1d3..0000000000
--- a/target/linux/bcm53xx/patches-3.18/110-firmware-backport-NVRAM-driver.patch
+++ /dev/null
@@ -1,82 +0,0 @@
-From 0509f6dcc46d10ea4bb8c70494dc7ae11bcb3f01 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Wed, 10 Dec 2014 21:14:10 +0100
-Subject: [PATCH] firmware: backport NVRAM driver
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- arch/arm/Kconfig | 2 ++
- drivers/firmware/Kconfig | 1 +
- drivers/firmware/Makefile | 1 +
- drivers/net/ethernet/broadcom/b44.c | 2 +-
- drivers/net/ethernet/broadcom/bgmac.c | 2 +-
- drivers/ssb/driver_chipcommon_pmu.c | 2 +-
- 6 files changed, 7 insertions(+), 3 deletions(-)
-
---- a/arch/arm/Kconfig
-+++ b/arch/arm/Kconfig
-@@ -2166,6 +2166,8 @@ source "net/Kconfig"
-
- source "drivers/Kconfig"
-
-+source "drivers/firmware/Kconfig"
-+
- source "fs/Kconfig"
-
- source "arch/arm/Kconfig.debug"
---- a/drivers/firmware/Kconfig
-+++ b/drivers/firmware/Kconfig
-@@ -132,6 +132,7 @@ config ISCSI_IBFT
- detect iSCSI boot parameters dynamically during system boot, say Y.
- Otherwise, say N.
-
-+source "drivers/firmware/broadcom/Kconfig"
- source "drivers/firmware/google/Kconfig"
- source "drivers/firmware/efi/Kconfig"
-
---- a/drivers/firmware/Makefile
-+++ b/drivers/firmware/Makefile
-@@ -12,6 +12,7 @@ obj-$(CONFIG_ISCSI_IBFT_FIND) += iscsi_i
- obj-$(CONFIG_ISCSI_IBFT) += iscsi_ibft.o
- obj-$(CONFIG_FIRMWARE_MEMMAP) += memmap.o
-
-+obj-y += broadcom/
- obj-$(CONFIG_GOOGLE_FIRMWARE) += google/
- obj-$(CONFIG_EFI) += efi/
- obj-$(CONFIG_UEFI_CPER) += efi/
---- a/drivers/net/ethernet/broadcom/b44.c
-+++ b/drivers/net/ethernet/broadcom/b44.c
-@@ -400,7 +400,7 @@ static void b44_set_flow_ctrl(struct b44
- }
-
- #ifdef CONFIG_BCM47XX
--#include <bcm47xx_nvram.h>
-+#include <linux/bcm47xx_nvram.h>
- static void b44_wap54g10_workaround(struct b44 *bp)
- {
- char buf[20];
---- a/drivers/net/ethernet/broadcom/bgmac.c
-+++ b/drivers/net/ethernet/broadcom/bgmac.c
-@@ -18,7 +18,7 @@
- #include <linux/interrupt.h>
- #include <linux/dma-mapping.h>
- #include <linux/platform_data/b53.h>
--#include <bcm47xx_nvram.h>
-+#include <linux/bcm47xx_nvram.h>
-
- static const struct bcma_device_id bgmac_bcma_tbl[] = {
- BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_4706_MAC_GBIT, BCMA_ANY_REV, BCMA_ANY_CLASS),
---- a/drivers/ssb/driver_chipcommon_pmu.c
-+++ b/drivers/ssb/driver_chipcommon_pmu.c
-@@ -14,7 +14,7 @@
- #include <linux/delay.h>
- #include <linux/export.h>
- #ifdef CONFIG_BCM47XX
--#include <bcm47xx_nvram.h>
-+#include <linux/bcm47xx_nvram.h>
- #endif
-
- #include "ssb_private.h"
diff --git a/target/linux/bcm53xx/patches-3.18/112-bcm53xx-sprom-add-sprom-driver.patch b/target/linux/bcm53xx/patches-3.18/112-bcm53xx-sprom-add-sprom-driver.patch
deleted file mode 100644
index b914fd995f..0000000000
--- a/target/linux/bcm53xx/patches-3.18/112-bcm53xx-sprom-add-sprom-driver.patch
+++ /dev/null
@@ -1,69 +0,0 @@
-From 4e0ab3269a6d260a41a3673157753147f5f71341 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sun, 4 May 2014 13:19:20 +0200
-Subject: [PATCH 03/17] bcm47xx-sprom: add Broadcom sprom parser driver
-
-This driver needs an nvram driver and fetches the sprom values from the
-nvram and provides it to any other driver. The calibration data for the
-wifi chip the mac address and some more board description data is
-stores in the sprom.
-
-This is based on a copy of arch/mips/bcm47xx/sprom.c and my plan is to
-make the bcm47xx MIPS SoCs also use this driver some time later.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- .../devicetree/bindings/misc/bcm47xx-sprom.txt | 16 +
- drivers/misc/Kconfig | 11 +
- drivers/misc/Makefile | 1 +
- drivers/misc/bcm47xx-sprom.c | 690 +++++++++++++++++++++
- 4 files changed, 718 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/misc/bcm47xx-sprom.txt
- create mode 100644 drivers/misc/bcm47xx-sprom.c
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/misc/bcm47xx-sprom.txt
-@@ -0,0 +1,16 @@
-+Broadcom bcm47xx/bcm53xx sprom converter
-+
-+This driver provbides an sprom based on a given nvram.
-+
-+Required properties:
-+
-+- compatible : brcm,bcm47xx-sprom
-+
-+- nvram : reference to a nvram driver, e.g. bcm47xx-nvram
-+
-+Example:
-+
-+sprom0: sprom@0 {
-+ compatible = "brcm,bcm47xx-sprom";
-+ nvram = <&nvram0>;
-+};
---- a/drivers/misc/Kconfig
-+++ b/drivers/misc/Kconfig
-@@ -515,6 +515,17 @@ config VEXPRESS_SYSCFG
- bus. System Configuration interface is one of the possible means
- of generating transactions on this bus.
-
-+config BCM47XX_SPROM
-+ tristate "BCM47XX sprom driver"
-+ help
-+ This driver parses the sprom from a given nvram which is found on
-+ Broadcom bcm47xx and bcm53xx SoCs.
-+
-+ The sprom contains board configuration data like the
-+ calibration data fro the wifi chips, the mac addresses used
-+ by the board and many other board configuration data. This
-+ driver will provide the sprom to bcma.
-+
- source "drivers/misc/c2port/Kconfig"
- source "drivers/misc/eeprom/Kconfig"
- source "drivers/misc/cb710/Kconfig"
---- a/drivers/misc/Makefile
-+++ b/drivers/misc/Makefile
-@@ -56,3 +56,4 @@ obj-$(CONFIG_GENWQE) += genwqe/
- obj-$(CONFIG_ECHO) += echo/
- obj-$(CONFIG_VEXPRESS_SYSCFG) += vexpress-syscfg.o
- obj-$(CONFIG_CXL_BASE) += cxl/
-+obj-$(CONFIG_BCM47XX_SPROM) += bcm47xx-sprom.o
diff --git a/target/linux/bcm53xx/patches-3.18/131-ARM-BCM5301X-Implement-SMP-support.patch b/target/linux/bcm53xx/patches-3.18/131-ARM-BCM5301X-Implement-SMP-support.patch
deleted file mode 100644
index db855c9d11..0000000000
--- a/target/linux/bcm53xx/patches-3.18/131-ARM-BCM5301X-Implement-SMP-support.patch
+++ /dev/null
@@ -1,314 +0,0 @@
-From 707ab07695ea8953a5bb56512e7bb38ca79c5c38 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Thu, 19 Feb 2015 23:27:59 +0100
-Subject: [PATCH V2] ARM: BCM5301X: Implement SMP support
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
-V2: Change code after receiving Florian's comments:
- 1) Use "mmio-sram"
- 2) Remove commented out ASM call
- 3) Fix coding style in ASM
- 4) Simplify finding OF node
----
- Documentation/devicetree/bindings/arm/bcm4708.txt | 24 ++++
- Documentation/devicetree/bindings/arm/cpus.txt | 1 +
- arch/arm/boot/dts/bcm4708.dtsi | 13 ++
- arch/arm/mach-bcm/Makefile | 3 +
- arch/arm/mach-bcm/bcm5301x_headsmp.S | 45 ++++++
- arch/arm/mach-bcm/bcm5301x_smp.c | 158 ++++++++++++++++++++++
- 6 files changed, 244 insertions(+)
- create mode 100644 arch/arm/mach-bcm/bcm5301x_headsmp.S
- create mode 100644 arch/arm/mach-bcm/bcm5301x_smp.c
-
---- a/Documentation/devicetree/bindings/arm/bcm4708.txt
-+++ b/Documentation/devicetree/bindings/arm/bcm4708.txt
-@@ -6,3 +6,27 @@ Boards with the BCM4708 SoC shall have t
- Required root node property:
-
- compatible = "brcm,bcm4708";
-+
-+Optional sub-node properties:
-+
-+compatible = "mmio-sram" for SRAM access with IO memory region
-+ This is needed for SMP-capable SoCs which use part of
-+ SRAM for storing location of code to be executed by the
-+ extra cores.
-+ SMP support requires another sub-node with compatible
-+ property "brcm,bcm4708-sysram".
-+
-+Example:
-+
-+ sysram@ffff0000 {
-+ compatible = "mmio-sram";
-+ reg = <0xffff0000 0x10000>;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ ranges = <0 0xffff0000 0x10000>;
-+
-+ smp-sysram@0 {
-+ compatible = "brcm,bcm4708-sysram";
-+ reg = <0x0 0x1000>;
-+ };
-+ };
---- a/Documentation/devicetree/bindings/arm/cpus.txt
-+++ b/Documentation/devicetree/bindings/arm/cpus.txt
-@@ -188,6 +188,7 @@ nodes to be present and contain the prop
- can be one of:
- "allwinner,sun6i-a31"
- "arm,psci"
-+ "brcm,bcm4708-smp"
- "brcm,brahma-b15"
- "marvell,armada-375-smp"
- "marvell,armada-380-smp"
---- a/arch/arm/boot/dts/bcm4708.dtsi
-+++ b/arch/arm/boot/dts/bcm4708.dtsi
-@@ -15,6 +15,7 @@
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-+ enable-method = "brcm,bcm4708-smp";
-
- cpu@0 {
- device_type = "cpu";
-@@ -31,4 +32,16 @@
- };
- };
-
-+ sysram@ffff0000 {
-+ compatible = "mmio-sram";
-+ reg = <0xffff0000 0x10000>;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ ranges = <0 0xffff0000 0x10000>;
-+
-+ smp-sysram@0 {
-+ compatible = "brcm,bcm4708-sysram";
-+ reg = <0x0 0x1000>;
-+ };
-+ };
- };
---- a/arch/arm/mach-bcm/Makefile
-+++ b/arch/arm/mach-bcm/Makefile
-@@ -33,6 +33,9 @@ obj-$(CONFIG_ARCH_BCM2835) += board_bcm2
-
- # BCM5301X
- obj-$(CONFIG_ARCH_BCM_5301X) += bcm_5301x.o
-+ifeq ($(CONFIG_SMP),y)
-+obj-$(CONFIG_ARCH_BCM_5301X) += bcm5301x_smp.o bcm5301x_headsmp.o
-+endif
-
- # BCM63XXx
- obj-$(CONFIG_ARCH_BCM_63XX) := bcm63xx.o
---- /dev/null
-+++ b/arch/arm/mach-bcm/bcm5301x_headsmp.S
-@@ -0,0 +1,45 @@
-+/*
-+ * Broadcom BCM470X / BCM5301X ARM platform code.
-+ *
-+ * Copyright (c) 2003 ARM Limited
-+ * All Rights Reserved
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+#include <linux/linkage.h>
-+
-+/*
-+ * BCM5301X specific entry point for secondary CPUs.
-+ */
-+ENTRY(bcm5301x_secondary_startup)
-+ mrc p15, 0, r0, c0, c0, 5
-+ and r0, r0, #15
-+ adr r4, 1f
-+ ldmia r4, {r5, r6}
-+ sub r4, r4, r5
-+ add r6, r6, r4
-+pen: ldr r7, [r6]
-+ cmp r7, r0
-+ bne pen
-+
-+ /*
-+ * In case L1 cache has unpredictable contents at power-up
-+ * clean its contents without flushing.
-+ */
-+ bl v7_invalidate_l1
-+
-+ mov r0, #0
-+ mcr p15, 0, r0, c7, c5, 0 /* Invalidate icache */
-+ dsb
-+ isb
-+
-+ /*
-+ * we've been released from the holding pen: secondary_stack
-+ * should now contain the SVC stack for this core
-+ */
-+ b secondary_startup
-+ENDPROC(bcm5301x_secondary_startup)
-+
-+ .align 2
-+1: .long .
-+ .long pen_release
---- /dev/null
-+++ b/arch/arm/mach-bcm/bcm5301x_smp.c
-@@ -0,0 +1,158 @@
-+/*
-+ * Broadcom BCM470X / BCM5301X ARM platform code.
-+ *
-+ * Copyright (C) 2002 ARM Ltd.
-+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+#include <asm/cacheflush.h>
-+#include <asm/delay.h>
-+#include <asm/smp_plat.h>
-+#include <asm/smp_scu.h>
-+
-+#include <linux/clockchips.h>
-+#include <linux/of.h>
-+#include <linux/of_address.h>
-+
-+#define SOC_ROM_LUT_OFF 0x400
-+
-+extern void bcm5301x_secondary_startup(void);
-+
-+static void __cpuinit write_pen_release(int val)
-+{
-+ pen_release = val;
-+ smp_wmb();
-+ sync_cache_w(&pen_release);
-+}
-+
-+static DEFINE_SPINLOCK(boot_lock);
-+
-+static void __init bcm5301x_smp_secondary_set_entry(void (*entry_point)(void))
-+{
-+ void __iomem *sysram_base_addr = NULL;
-+ struct device_node *node;
-+
-+ node = of_find_compatible_node(NULL, NULL, "brcm,bcm4708-sysram");
-+ if (!of_device_is_available(node))
-+ return;
-+
-+ sysram_base_addr = of_iomap(node, 0);
-+ if (!sysram_base_addr) {
-+ pr_warn("Failed to map sysram\n");
-+ return;
-+ }
-+
-+ writel(virt_to_phys(entry_point), sysram_base_addr + SOC_ROM_LUT_OFF);
-+
-+ dsb_sev(); /* Exit WFI */
-+ mb(); /* make sure write buffer is drained */
-+
-+ iounmap(sysram_base_addr);
-+}
-+
-+static void __init bcm5301x_smp_prepare_cpus(unsigned int max_cpus)
-+{
-+ void __iomem *scu_base;
-+
-+ if (!scu_a9_has_base()) {
-+ pr_warn("Unknown SCU base\n");
-+ return;
-+ }
-+
-+ scu_base = ioremap((phys_addr_t)scu_a9_get_base(), SZ_256);
-+ if (!scu_base) {
-+ pr_err("Failed to remap SCU\n");
-+ return;
-+ }
-+
-+ /* Initialise the SCU */
-+ scu_enable(scu_base);
-+
-+ /* Let CPUs know where to start */
-+ bcm5301x_smp_secondary_set_entry(bcm5301x_secondary_startup);
-+
-+ iounmap(scu_base);
-+}
-+
-+static void __cpuinit bcm5301x_smp_secondary_init(unsigned int cpu)
-+{
-+ trace_hardirqs_off();
-+
-+ /*
-+ * let the primary processor know we're out of the
-+ * pen, then head off into the C entry point
-+ */
-+ write_pen_release(-1);
-+
-+ /*
-+ * Synchronise with the boot thread.
-+ */
-+ spin_lock(&boot_lock);
-+ spin_unlock(&boot_lock);
-+}
-+
-+static int __cpuinit bcm5301x_smp_boot_secondary(unsigned int cpu,
-+ struct task_struct *idle)
-+{
-+ unsigned long timeout;
-+
-+ /*
-+ * set synchronisation state between this boot processor
-+ * and the secondary one
-+ */
-+ spin_lock(&boot_lock);
-+
-+ /*
-+ * The secondary processor is waiting to be released from
-+ * the holding pen - release it, then wait for it to flag
-+ * that it has been released by resetting pen_release.
-+ *
-+ * Note that "pen_release" is the hardware CPU ID, whereas
-+ * "cpu" is Linux's internal ID.
-+ */
-+ write_pen_release(cpu_logical_map(cpu));
-+
-+ /* Send the secondary CPU SEV */
-+ dsb_sev();
-+
-+ udelay(100);
-+
-+ /*
-+ * Send the secondary CPU a soft interrupt, thereby causing
-+ * the boot monitor to read the system wide flags register,
-+ * and branch to the address found there.
-+ */
-+ arch_send_wakeup_ipi_mask(cpumask_of(cpu));
-+
-+ /*
-+ * Timeout set on purpose in jiffies so that on slow processors
-+ * that must also have low HZ it will wait longer.
-+ */
-+ timeout = jiffies + (HZ * 10);
-+ while (time_before(jiffies, timeout)) {
-+ smp_rmb();
-+ if (pen_release == -1)
-+ break;
-+
-+ udelay(10);
-+ }
-+
-+ /*
-+ * now the secondary core is starting up let it run its
-+ * calibrations, then wait for it to finish
-+ */
-+ spin_unlock(&boot_lock);
-+
-+ return pen_release != -1 ? -ENOSYS : 0;
-+}
-+
-+static struct smp_operations bcm5301x_smp_ops __initdata = {
-+ .smp_prepare_cpus = bcm5301x_smp_prepare_cpus,
-+ .smp_secondary_init = bcm5301x_smp_secondary_init,
-+ .smp_boot_secondary = bcm5301x_smp_boot_secondary,
-+};
-+
-+CPU_METHOD_OF_DECLARE(bcm5301x_smp, "brcm,bcm4708-smp",
-+ &bcm5301x_smp_ops);
diff --git a/target/linux/bcm53xx/patches-3.18/150-pci-do-not-probe-too-early.patch b/target/linux/bcm53xx/patches-3.18/150-pci-do-not-probe-too-early.patch
deleted file mode 100644
index 2964a26faa..0000000000
--- a/target/linux/bcm53xx/patches-3.18/150-pci-do-not-probe-too-early.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From cf72936c001056de1cfcb27dd9a232f5484ec59c Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Thu, 29 May 2014 20:54:15 +0200
-Subject: [PATCH 12/17] pci: do not probe too early
-
-Probing is done before the PCIe bridge is fully activated and the
-address spaces does not get assigned to the PCIe devices. Without the
-address space the driver can not register to this device. With this
-patch the driver reregistration is done later.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/pci/probe.c | 5 ++++-
- 1 file changed, 4 insertions(+), 1 deletion(-)
-
---- a/drivers/pci/probe.c
-+++ b/drivers/pci/probe.c
-@@ -2100,7 +2100,10 @@ struct pci_bus *pci_scan_root_bus(struct
- if (!found)
- pci_bus_update_busn_res_end(b, max);
-
-- pci_bus_add_devices(b);
-+ /* this should be done in arch/arm/kernel/bios32.c, because the
-+ resources for the PCI devices are initilized later and doing
-+ it here will fail. */
-+ /* pci_bus_add_devices(b); */
- return b;
- }
- EXPORT_SYMBOL(pci_scan_root_bus);
diff --git a/target/linux/bcm53xx/patches-3.18/170-pcie2-bcma-add-new-PCIe2-driver-for-bcma.patch b/target/linux/bcm53xx/patches-3.18/170-pcie2-bcma-add-new-PCIe2-driver-for-bcma.patch
deleted file mode 100644
index 9c8aa3bd0e..0000000000
--- a/target/linux/bcm53xx/patches-3.18/170-pcie2-bcma-add-new-PCIe2-driver-for-bcma.patch
+++ /dev/null
@@ -1,535 +0,0 @@
-From cf067bf8bb993d6cfdc42d750ae241c43f88403f Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Mon, 12 May 2014 11:55:20 +0200
-Subject: [PATCH 1/2] PCI: BCM5301X: add PCIe2 driver for BCM5301X SoCs
-
-This driver supports the PCIe controller found on the BCM4708 and
-similar SoCs. The controller itself is automatically detected by bcma.
-
-This controller is found on SoCs usually used in SOHO routers to
-connect the wifi cards to the SoC. All the of the BCM5301X SoCs I know
-of have 2 or 3 of these controllers in the SoC.
-
-I had to use PCI domains otherwise the pci_create_root_bus() function
-in drivers/pci/probe.c would fail for the second controller being
-registered because pci_find_bus() would find the same PCIe bus again
-and assume it is already registered, which ends up in a kernel panic in
-pcibios_init_hw() in arch/arm/kernel/bios32.c
-
-The ARM PCI code assumes that every controller has an I/O space and
-adds a dummy area if the driver does not specify one. This will work
-for the first controller, but when we register the second one this will
-result in an error. To prevent this problem we add an empty I/O space.
-
-Currently I have problems with probing the devices on the bus, because
-pci_bus_add_devices() is called too early in pci_scan_root_bus() in
-drivers/pci/probe.c, before pci_bus_assign_resources() was called in
-pci_common_init_dev() in arch/arm/kernel/bios32.c. When the devices are
-added too early they do not have any resources and adding fails. I have
-to remove the call to pci_bus_add_devices() in pci_scan_root_bus() to
-make registration work, calling pci_bus_add_devices() later again does
-not fix this problem.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/arm/mach-bcm/Kconfig | 1 +
- drivers/pci/host/Kconfig | 7 +
- drivers/pci/host/Makefile | 1 +
- drivers/pci/host/pci-host-bcm5301x.c | 428 +++++++++++++++++++++++++++++++++++
- 4 files changed, 437 insertions(+)
- create mode 100644 drivers/pci/host/pci-host-bcm5301x.c
-
---- a/arch/arm/mach-bcm/Kconfig
-+++ b/arch/arm/mach-bcm/Kconfig
-@@ -86,6 +86,7 @@ config ARCH_BCM_5301X
- select HAVE_ARM_TWD if SMP
- select ARM_GLOBAL_TIMER
- select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
-+ select PCI_DOMAINS if PCI
- help
- Support for Broadcom BCM470X and BCM5301X SoCs with ARM CPU cores.
-
---- a/drivers/pci/host/Kconfig
-+++ b/drivers/pci/host/Kconfig
-@@ -91,4 +91,11 @@ config PCI_XGENE
- There are 5 internal PCIe ports available. Each port is GEN3 capable
- and have varied lanes from x1 to x8.
-
-+config PCI_BCM5301X
-+ bool "BCM5301X PCIe2 host controller"
-+ depends on BCMA && OF && ARM && PCI_DOMAINS
-+ help
-+ Say Y here if you want to support the PCIe host controller found
-+ on Broadcom BCM5301X and BCM470X (Northstar) SoCs.
-+
- endmenu
---- a/drivers/pci/host/Makefile
-+++ b/drivers/pci/host/Makefile
-@@ -11,3 +11,4 @@ obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spe
- obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone-dw.o pci-keystone.o
- obj-$(CONFIG_PCIE_XILINX) += pcie-xilinx.o
- obj-$(CONFIG_PCI_XGENE) += pci-xgene.o
-+obj-$(CONFIG_PCI_BCM5301X) += pci-host-bcm5301x.o
---- /dev/null
-+++ b/drivers/pci/host/pci-host-bcm5301x.c
-@@ -0,0 +1,460 @@
-+/*
-+ * Northstar PCI-Express driver
-+ * Only supports Root-Complex (RC) mode
-+ *
-+ * Notes:
-+ * PCI Domains are being used to identify the PCIe port 1:1.
-+ *
-+ * Only MEM access is supported, PAX does not support IO.
-+ *
-+ * Copyright 2012-2014, Broadcom Corporation
-+ * Copyright 2014, Hauke Mehrtens <hauke@hauke-m.de>
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/delay.h>
-+#include <linux/pci.h>
-+#include <linux/io.h>
-+#include <linux/ioport.h>
-+#include <linux/bcma/bcma.h>
-+#include <linux/bcma/bcma_driver_pcie2.h>
-+
-+#define SOC_PCIE_HDR_OFF 0x400 /* 256 bytes per function */
-+
-+#define PCI_LINK_STATUS_CTRL_2_OFFSET 0xDC
-+#define PCI_TARGET_LINK_SPEED_MASK 0xF
-+#define PCI_TARGET_LINK_SPEED_GEN2 0x2
-+#define PCI_TARGET_LINK_SPEED_GEN1 0x1
-+
-+static int bcma_pcie2_map_irq(const struct pci_dev *pdev, u8 slot, u8 pin)
-+{
-+ struct pci_sys_data *sys = pdev->sysdata;
-+ struct bcma_device *bdev = sys->private_data;
-+
-+ return bcma_core_irq(bdev, 5);
-+}
-+
-+static u32 bcma_pcie2_cfg_base(struct bcma_device *bdev, int busno,
-+ unsigned int devfn, int where)
-+{
-+ int slot = PCI_SLOT(devfn);
-+ int fn = PCI_FUNC(devfn);
-+ u32 addr_reg;
-+
-+ if (busno == 0) {
-+ if (slot >= 1)
-+ return 0;
-+ bcma_write32(bdev, BCMA_CORE_PCIE2_CONFIGINDADDR,
-+ where & 0xffc);
-+ return BCMA_CORE_PCIE2_CONFIGINDDATA;
-+ }
-+ if (fn > 1)
-+ return 0;
-+ addr_reg = (busno & 0xff) << 20 | (slot << 15) | (fn << 12) |
-+ (where & 0xffc) | (1 & 0x3);
-+
-+ bcma_write32(bdev, BCMA_CORE_PCIE2_CFG_ADDR, addr_reg);
-+ return BCMA_CORE_PCIE2_CFG_DATA;
-+}
-+
-+static u32 bcma_pcie2_read_config(struct bcma_device *bdev, int busno,
-+ unsigned int devfn, int where, int size)
-+{
-+ u32 base;
-+ u32 data_reg;
-+ u32 mask;
-+ int shift;
-+
-+ base = bcma_pcie2_cfg_base(bdev, busno, devfn, where);
-+
-+ if (!base)
-+ return ~0UL;
-+
-+ data_reg = bcma_read32(bdev, base);
-+
-+ if (size == 4)
-+ return data_reg;
-+
-+ mask = (1 << (size * 8)) - 1;
-+ shift = (where % 4) * 8;
-+ return (data_reg >> shift) & mask;
-+}
-+
-+static void bcma_pcie2_write_config(struct bcma_device *bdev, int busno,
-+ unsigned int devfn, int where, int size,
-+ u32 val)
-+{
-+ u32 base;
-+ u32 data_reg;
-+
-+ base = bcma_pcie2_cfg_base(bdev, busno, devfn, where);
-+
-+ if (!base)
-+ return;
-+
-+ if (size < 4) {
-+ u32 mask = (1 << (size * 8)) - 1;
-+ int shift = (where % 4) * 8;
-+
-+ data_reg = bcma_read32(bdev, base);
-+ data_reg &= ~(mask << shift);
-+ data_reg |= (val & mask) << shift;
-+ } else {
-+ data_reg = val;
-+ }
-+
-+ bcma_write32(bdev, base, data_reg);
-+}
-+
-+static int bcma_pcie2_read_config_pci(struct pci_bus *bus, unsigned int devfn,
-+ int where, int size, u32 *val)
-+{
-+ struct pci_sys_data *sys = bus->sysdata;
-+ struct bcma_device *bdev = sys->private_data;
-+
-+ *val = bcma_pcie2_read_config(bdev, bus->number, devfn, where, size);
-+
-+ return PCIBIOS_SUCCESSFUL;
-+}
-+
-+static int bcma_pcie2_write_config_pci(struct pci_bus *bus, unsigned int devfn,
-+ int where, int size, u32 val)
-+{
-+ struct pci_sys_data *sys = bus->sysdata;
-+ struct bcma_device *bdev = sys->private_data;
-+
-+ bcma_pcie2_write_config(bdev, bus->number, devfn, where, size, val);
-+
-+ return PCIBIOS_SUCCESSFUL;
-+}
-+
-+/*
-+ * Methods for accessing configuration registers
-+ */
-+static struct pci_ops bcma_pcie2_ops = {
-+ .read = bcma_pcie2_read_config_pci,
-+ .write = bcma_pcie2_write_config_pci,
-+};
-+
-+/* NS: CLASS field is R/O, and set to wrong 0x200 value */
-+static void bcma_pcie2_fixup_class(struct pci_dev *dev)
-+{
-+ dev->class = PCI_CLASS_BRIDGE_PCI << 8;
-+}
-+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0x8011, bcma_pcie2_fixup_class);
-+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0x8012, bcma_pcie2_fixup_class);
-+
-+/*
-+ * Check link status, return 0 if link is up in RC mode,
-+ * otherwise return non-zero
-+ */
-+static int bcma_pcie2_check_link(struct bcma_device *bdev, struct pci_sys_data *sys)
-+{
-+ u32 tmp32;
-+ u16 tmp16;
-+ u16 pos;
-+ u8 nlw;
-+ /*
-+ * Setup callback (bcma_pcie2_setup) is called in pcibios_init_hw before
-+ * creating bus root, so we don't have it here yet. On the other hand
-+ * we really want to use pci_bus_find_capability helper to check NLW.
-+ * Let's fake simple pci_bus just to query for capabilities.
-+ */
-+ struct pci_bus bus = {
-+ .number = 0,
-+ .ops = &bcma_pcie2_ops,
-+ .sysdata = sys,
-+ };
-+
-+ tmp32 = bcma_read32(bdev, BCMA_CORE_PCIE2_LINK_STATUS);
-+ dev_dbg(&bdev->dev, "link status: 0x%08x\n", tmp32);
-+
-+ tmp32 = bcma_read32(bdev, BCMA_CORE_PCIE2_STRAP_STATUS);
-+ dev_dbg(&bdev->dev, "strap status: 0x%08x\n", tmp32);
-+
-+ /* check link status to see if link is active */
-+ pos = pci_bus_find_capability(&bus, 0, PCI_CAP_ID_EXP);
-+ pci_bus_read_config_word(&bus, 0, pos + PCI_EXP_LNKSTA, &tmp16);
-+ nlw = (tmp16 & PCI_EXP_LNKSTA_NLW) >> PCI_EXP_LNKSTA_NLW_SHIFT;
-+
-+ if (nlw == 0) {
-+ /* try GEN 1 link speed */
-+ tmp32 = bcma_pcie2_read_config(bdev, 0, 0,
-+ PCI_LINK_STATUS_CTRL_2_OFFSET, 4);
-+ if ((tmp32 & PCI_TARGET_LINK_SPEED_MASK) ==
-+ PCI_TARGET_LINK_SPEED_GEN2) {
-+ tmp32 &= ~PCI_TARGET_LINK_SPEED_MASK;
-+ tmp32 |= PCI_TARGET_LINK_SPEED_GEN1;
-+ bcma_pcie2_write_config(bdev, 0, 0,
-+ PCI_LINK_STATUS_CTRL_2_OFFSET, 4, tmp32);
-+ tmp32 = bcma_pcie2_read_config(bdev, 0, 0,
-+ PCI_LINK_STATUS_CTRL_2_OFFSET, 4);
-+ msleep(100);
-+
-+ pos = pci_bus_find_capability(&bus, 0, PCI_CAP_ID_EXP);
-+ pci_bus_read_config_word(&bus, 0, pos + PCI_EXP_LNKSTA,
-+ &tmp16);
-+ nlw = (tmp16 & PCI_EXP_LNKSTA_NLW) >>
-+ PCI_EXP_LNKSTA_NLW_SHIFT;
-+ }
-+ }
-+
-+ dev_info(&bdev->dev, "link: %s\n", nlw ? "UP" : "DOWN");
-+ return nlw ? 0 : -ENODEV;
-+}
-+
-+/*
-+ * Initializte the PCIe controller
-+ */
-+static void bcma_pcie2_hw_init(struct bcma_device *bdev)
-+{
-+ u32 tmp32;
-+ u16 tmp16;
-+
-+ /* Change MPS and MRRS to 512 */
-+ tmp16 = bcma_pcie2_read_config(bdev, 0, 0, 0x4d4, 2);
-+ tmp16 &= ~7;
-+ tmp16 |= 2;
-+ bcma_pcie2_write_config(bdev, 0, 0, 0x4d4, 2, tmp16);
-+
-+ tmp32 = bcma_pcie2_read_config(bdev, 0, 0, 0xb4, 4);
-+ tmp32 &= ~((7 << 12) | (7 << 5));
-+ tmp32 |= (2 << 12) | (2 << 5);
-+ bcma_pcie2_write_config(bdev, 0, 0, 0xb4, 4, tmp32);
-+
-+ /*
-+ * Turn-on Root-Complex (RC) mode, from reset default of EP
-+ * The mode is set by straps, can be overwritten via DMU
-+ * register <cru_straps_control> bit 5, "1" means RC
-+ */
-+
-+ /* Send a downstream reset */
-+ bcma_write32(bdev, BCMA_CORE_PCIE2_CLK_CONTROL,
-+ PCIE2_CLKC_RST_OE | PCIE2_CLKC_RST);
-+ usleep_range(250, 400);
-+ bcma_write32(bdev, BCMA_CORE_PCIE2_CLK_CONTROL, PCIE2_CLKC_RST_OE);
-+ msleep(250);
-+
-+ /* TBD: take care of PM, check we're on */
-+}
-+
-+/*
-+ * Setup the address translation
-+ *
-+ * NOTE: All PCI-to-CPU address mapping are 1:1 for simplicity
-+ */
-+static int bcma_pcie2_map_init(struct bcma_device *bdev, u32 addr)
-+{
-+ /* 64MB alignment */
-+ if (!addr || (addr & (SZ_64M - 1)))
-+ return -EINVAL;
-+
-+ bcma_write32(bdev, BCMA_CORE_PCIE2_OMAP0_LOWER, addr);
-+ bcma_write32(bdev, BCMA_CORE_PCIE2_OARR0, addr | 0x01);
-+
-+ bcma_write32(bdev, BCMA_CORE_PCIE2_OMAP1_LOWER, addr + SZ_64M);
-+ bcma_write32(bdev, BCMA_CORE_PCIE2_OARR1, (addr + SZ_64M) | 0x01);
-+
-+ /*
-+ * Inbound address translation setup
-+ * Northstar only maps up to 128 MiB inbound, DRAM could be up to 1 GiB.
-+ *
-+ * For now allow access to entire DRAM, assuming it is less than 128MiB,
-+ * otherwise DMA bouncing mechanism may be required.
-+ * Also consider DMA mask to limit DMA physical address
-+ */
-+ /* 64-bit LE regs, write low word, high is 0 at reset */
-+ bcma_write32(bdev, BCMA_CORE_PCIE2_FUNC0_IMAP1, PHYS_OFFSET | 0x1);
-+ bcma_write32(bdev, BCMA_CORE_PCIE2_IARR1_LOWER,
-+ PHYS_OFFSET | ((SZ_128M >> 20) & 0xff));
-+ return 0;
-+}
-+
-+/*
-+ * Setup PCIE Host bridge
-+ */
-+static int bcma_pcie2_bridge_init(struct bcma_device *bdev, u32 addr, u32 size)
-+{
-+ bcma_pcie2_write_config(bdev, 0, 0, PCI_PRIMARY_BUS, 1, 0);
-+ bcma_pcie2_write_config(bdev, 0, 0, PCI_SECONDARY_BUS, 1, 1);
-+ bcma_pcie2_write_config(bdev, 0, 0, PCI_SUBORDINATE_BUS, 1, 4);
-+
-+ bcma_pcie2_read_config(bdev, 0, 0, PCI_PRIMARY_BUS, 1);
-+ bcma_pcie2_read_config(bdev, 0, 0, PCI_SECONDARY_BUS, 1);
-+ bcma_pcie2_read_config(bdev, 0, 0, PCI_SUBORDINATE_BUS, 1);
-+
-+ /* MEM_BASE, MEM_LIM require 1MB alignment */
-+ if (((addr >> 16) & 0xf) || (((addr + size) >> 16) & 0xf))
-+ return -EINVAL;
-+
-+ bcma_pcie2_write_config(bdev, 0, 0, PCI_MEMORY_BASE, 2, addr >> 16);
-+ bcma_pcie2_write_config(bdev, 0, 0, PCI_MEMORY_LIMIT, 2,
-+ (addr + size) >> 16);
-+
-+ /* These registers are not supported on the NS */
-+ bcma_pcie2_write_config(bdev, 0, 0, PCI_IO_BASE_UPPER16, 2, 0);
-+ bcma_pcie2_write_config(bdev, 0, 0, PCI_IO_LIMIT_UPPER16, 2, 0);
-+
-+ /* Force class to that of a Bridge */
-+ bcma_pcie2_write_config(bdev, 0, 0, PCI_CLASS_DEVICE, 2,
-+ PCI_CLASS_BRIDGE_PCI);
-+
-+ bcma_pcie2_read_config(bdev, 0, 0, PCI_CLASS_DEVICE, 2);
-+ bcma_pcie2_read_config(bdev, 0, 0, PCI_MEMORY_BASE, 2);
-+ bcma_pcie2_read_config(bdev, 0, 0, PCI_MEMORY_LIMIT, 2);
-+ return 0;
-+}
-+
-+static void bcma_pcie2_3rd_init(struct bcma_bus *bus)
-+{
-+ /* PCIE PLL block register (base 0x8000) */
-+ bcma_chipco_b_mii_write(&bus->drv_cc_b, 0x00000088, 0x57fe8000);
-+ /* Check PCIE PLL lock status */
-+ bcma_chipco_b_mii_write(&bus->drv_cc_b, 0x00000088, 0x67c60000);
-+}
-+
-+/* To improve PCIE phy jitter */
-+static void bcma_pcie2_improve_phy_jitter(struct bcma_bus *bus, int phyaddr)
-+{
-+ u32 val;
-+
-+ /* Change blkaddr */
-+ val = (1 << 30) | (1 << 28) | (phyaddr << 23) | (0x1f << 18) |
-+ (2 << 16) | (0x863 << 4);
-+ bcma_chipco_b_mii_write(&bus->drv_cc_b, 0x0000009a, val);
-+
-+ /* Write 0x0190 to 0x13 regaddr */
-+ val = (1 << 30) | (1 << 28) | (phyaddr << 23) | (0x13 << 18) |
-+ (2 << 16) | 0x0190;
-+ bcma_chipco_b_mii_write(&bus->drv_cc_b, 0x0000009a, val);
-+
-+ /* Write 0x0191 to 0x19 regaddr */
-+ val = (1 << 30) | (1 << 28) | (phyaddr << 23) | (0x19 << 18) |
-+ (2 << 16) | 0x0191;
-+ bcma_chipco_b_mii_write(&bus->drv_cc_b, 0x0000009a, val);
-+}
-+
-+static int bcma_pcie2_setup(int nr, struct pci_sys_data *sys)
-+{
-+ struct bcma_device *bdev = sys->private_data;
-+ struct bcma_bus *bus = bdev->bus;
-+ struct resource *res;
-+ struct bcma_device *arm_core;
-+ u32 cru_straps_ctrl;
-+ int ret;
-+ int phyaddr;
-+
-+ if (bdev->core_unit == 2) {
-+ arm_core = bcma_find_core(bus, BCMA_CORE_ARMCA9);
-+ cru_straps_ctrl = bcma_read32(arm_core, 0x2a0);
-+
-+ /* 3rd PCIE is not selected */
-+ if (cru_straps_ctrl & 0x10)
-+ return -ENODEV;
-+
-+ bcma_pcie2_3rd_init(bus);
-+ phyaddr = 0xf;
-+ } else {
-+ phyaddr = bdev->core_unit;
-+ }
-+ bcma_pcie2_improve_phy_jitter(bus, phyaddr);
-+
-+ /* create mem resource */
-+ res = devm_kzalloc(&bdev->dev, sizeof(*res), GFP_KERNEL);
-+ if (!res)
-+ return -EINVAL;
-+
-+ res->start = bdev->addr_s[0];
-+ res->end = bdev->addr_s[0] + SZ_128M -1;
-+ res->name = "PCIe dummy IO space";
-+ res->flags = IORESOURCE_MEM;
-+
-+ pci_add_resource(&sys->resources, res);
-+
-+ /* This PCIe controller does not support IO Mem, so use a dummy one. */
-+ res = devm_kzalloc(&bdev->dev, sizeof(*res), GFP_KERNEL);
-+ if (!res)
-+ return -EINVAL;
-+
-+ res->start = 0;
-+ res->end = 0;
-+ res->name = "PCIe dummy IO space";
-+ res->flags = IORESOURCE_IO;
-+
-+ pci_add_resource(&sys->resources, res);
-+
-+ bcma_pcie2_hw_init(bdev);
-+ ret = bcma_pcie2_map_init(bdev, bdev->addr_s[0]);
-+ if (ret)
-+ return ret;
-+
-+ /*
-+ * Skip inactive ports -
-+ * will need to change this for hot-plugging
-+ */
-+ ret = bcma_pcie2_check_link(bdev, sys);
-+ if (ret)
-+ return ret;
-+
-+ ret = bcma_pcie2_bridge_init(bdev, bdev->addr_s[0], SZ_128M);
-+ if (ret)
-+ return ret;
-+
-+ return 1;
-+}
-+
-+static int bcma_pcie2_probe(struct bcma_device *bdev)
-+{
-+ struct hw_pci hw = {
-+ .nr_controllers = 1,
-+ .domain = bdev->core_unit,
-+ .private_data = (void **)&bdev,
-+ .setup = bcma_pcie2_setup,
-+ .map_irq = bcma_pcie2_map_irq,
-+ .ops = &bcma_pcie2_ops,
-+ };
-+
-+ dev_info(&bdev->dev, "initializing PCIe controller\n");
-+
-+ /* Announce this port to ARM/PCI common code */
-+ pci_common_init_dev(&bdev->dev, &hw);
-+
-+ /* Setup virtual-wire interrupts */
-+ bcma_write32(bdev, BCMA_CORE_PCIE2_SYS_RC_INTX_EN, 0xf);
-+
-+ /* Enable memory and bus master */
-+ bcma_write32(bdev, SOC_PCIE_HDR_OFF + 4, 0x6);
-+
-+ return 0;
-+}
-+
-+static const struct bcma_device_id bcma_pcie2_table[] = {
-+ BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_NS_PCIEG2, BCMA_ANY_REV, BCMA_ANY_CLASS),
-+ BCMA_CORETABLE_END
-+};
-+MODULE_DEVICE_TABLE(bcma, bcma_pcie2_table);
-+
-+static struct bcma_driver bcma_pcie2_driver = {
-+ .name = KBUILD_MODNAME,
-+ .id_table = bcma_pcie2_table,
-+ .probe = bcma_pcie2_probe,
-+};
-+
-+static int __init bcma_pcie2_init(void)
-+{
-+ return bcma_driver_register(&bcma_pcie2_driver);
-+}
-+module_init(bcma_pcie2_init);
-+
-+static void __exit bcma_pcie2_exit(void)
-+{
-+ bcma_driver_unregister(&bcma_pcie2_driver);
-+}
-+module_exit(bcma_pcie2_exit);
-+
-+MODULE_AUTHOR("Hauke Mehrtens");
-+MODULE_DESCRIPTION("BCM5301X PCIe host controller");
-+MODULE_LICENSE("GPLv2");
diff --git a/target/linux/bcm53xx/patches-3.18/180-USB-bcma-remove-chip-id-check.patch b/target/linux/bcm53xx/patches-3.18/180-USB-bcma-remove-chip-id-check.patch
deleted file mode 100644
index e5e3010356..0000000000
--- a/target/linux/bcm53xx/patches-3.18/180-USB-bcma-remove-chip-id-check.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From baf3d128e5bdf9d322539609133a15b493b0c2ef Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Thu, 11 Jun 2015 22:57:35 +0200
-Subject: [PATCH] USB: bcma: remove chip id check
-
-I have never seen any bcma device with an USB host core which was not a
-SoC, the bcma devices have an USB device core with a different core id.
-Some SoC have IDs with 47XX and 53XX in decimal form which would be
-rejected by this check. Instead of fixing this check just remove it.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/usb/host/bcma-hcd.c | 5 -----
- 1 file changed, 5 deletions(-)
-
---- a/drivers/usb/host/bcma-hcd.c
-+++ b/drivers/usb/host/bcma-hcd.c
-@@ -214,16 +214,11 @@ err_alloc:
- static int bcma_hcd_probe(struct bcma_device *dev)
- {
- int err;
-- u16 chipid_top;
- u32 ohci_addr;
- struct bcma_hcd_device *usb_dev;
- struct bcma_chipinfo *chipinfo;
-
- chipinfo = &dev->bus->chipinfo;
-- /* USBcores are only connected on embedded devices. */
-- chipid_top = (chipinfo->id & 0xFF00);
-- if (chipid_top != 0x4700 && chipid_top != 0x5300)
-- return -ENODEV;
-
- /* TODO: Probably need checks here; is the core connected? */
-
diff --git a/target/linux/bcm53xx/patches-3.18/181-USB-bcma-replace-numbers-with-constants.patch b/target/linux/bcm53xx/patches-3.18/181-USB-bcma-replace-numbers-with-constants.patch
deleted file mode 100644
index 5ae4e0d7aa..0000000000
--- a/target/linux/bcm53xx/patches-3.18/181-USB-bcma-replace-numbers-with-constants.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From f5bc834917a8b1b9487749bdfe8eda52a01967b4 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Thu, 11 Jun 2015 22:57:36 +0200
-Subject: [PATCH] USB: bcma: replace numbers with constants
-
-The constants for these numbers were added long time ago, use them.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/usb/host/bcma-hcd.c | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/drivers/usb/host/bcma-hcd.c
-+++ b/drivers/usb/host/bcma-hcd.c
-@@ -233,7 +233,8 @@ static int bcma_hcd_probe(struct bcma_de
-
- /* In AI chips EHCI is addrspace 0, OHCI is 1 */
- ohci_addr = dev->addr_s[0];
-- if ((chipinfo->id == 0x5357 || chipinfo->id == 0x4749)
-+ if ((chipinfo->id == BCMA_CHIP_ID_BCM5357 ||
-+ chipinfo->id == BCMA_CHIP_ID_BCM4749)
- && chipinfo->rev == 0)
- ohci_addr = 0x18009000;
-
diff --git a/target/linux/bcm53xx/patches-3.18/182-USB-bcma-use-devm_kzalloc.patch b/target/linux/bcm53xx/patches-3.18/182-USB-bcma-use-devm_kzalloc.patch
deleted file mode 100644
index 700d354332..0000000000
--- a/target/linux/bcm53xx/patches-3.18/182-USB-bcma-use-devm_kzalloc.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From 93724affb195149df6f7630901d878f6e273fa02 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Thu, 11 Jun 2015 22:57:37 +0200
-Subject: [PATCH] USB: bcma: use devm_kzalloc
-
-Instead of manually handling the frees use devm. There was also a free
-missing in the unregister call which is not needed with devm.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/usb/host/bcma-hcd.c | 11 ++++-------
- 1 file changed, 4 insertions(+), 7 deletions(-)
-
---- a/drivers/usb/host/bcma-hcd.c
-+++ b/drivers/usb/host/bcma-hcd.c
-@@ -225,7 +225,8 @@ static int bcma_hcd_probe(struct bcma_de
- if (dma_set_mask_and_coherent(dev->dma_dev, DMA_BIT_MASK(32)))
- return -EOPNOTSUPP;
-
-- usb_dev = kzalloc(sizeof(struct bcma_hcd_device), GFP_KERNEL);
-+ usb_dev = devm_kzalloc(&dev->dev, sizeof(struct bcma_hcd_device),
-+ GFP_KERNEL);
- if (!usb_dev)
- return -ENOMEM;
-
-@@ -239,10 +240,8 @@ static int bcma_hcd_probe(struct bcma_de
- ohci_addr = 0x18009000;
-
- usb_dev->ohci_dev = bcma_hcd_create_pdev(dev, true, ohci_addr);
-- if (IS_ERR(usb_dev->ohci_dev)) {
-- err = PTR_ERR(usb_dev->ohci_dev);
-- goto err_free_usb_dev;
-- }
-+ if (IS_ERR(usb_dev->ohci_dev))
-+ return PTR_ERR(usb_dev->ohci_dev);
-
- usb_dev->ehci_dev = bcma_hcd_create_pdev(dev, false, dev->addr);
- if (IS_ERR(usb_dev->ehci_dev)) {
-@@ -255,8 +254,6 @@ static int bcma_hcd_probe(struct bcma_de
-
- err_unregister_ohci_dev:
- platform_device_unregister(usb_dev->ohci_dev);
--err_free_usb_dev:
-- kfree(usb_dev);
- return err;
- }
-
diff --git a/target/linux/bcm53xx/patches-3.18/183-USB-bcma-fix-error-handling-in-bcma_hcd_create_pdev.patch b/target/linux/bcm53xx/patches-3.18/183-USB-bcma-fix-error-handling-in-bcma_hcd_create_pdev.patch
deleted file mode 100644
index 91cd0fa320..0000000000
--- a/target/linux/bcm53xx/patches-3.18/183-USB-bcma-fix-error-handling-in-bcma_hcd_create_pdev.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From 232996d1ba3002e7e80b18075e2838fc86f21412 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Thu, 11 Jun 2015 22:57:38 +0200
-Subject: [PATCH] USB: bcma: fix error handling in bcma_hcd_create_pdev()
-
-This patch makes bcma_hcd_create_pdev() not return NULL, but a prober
-error code in case of an error.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/usb/host/bcma-hcd.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/usb/host/bcma-hcd.c
-+++ b/drivers/usb/host/bcma-hcd.c
-@@ -169,7 +169,7 @@ static struct platform_device *bcma_hcd_
- {
- struct platform_device *hci_dev;
- struct resource hci_res[2];
-- int ret = -ENOMEM;
-+ int ret;
-
- memset(hci_res, 0, sizeof(hci_res));
-
-@@ -183,7 +183,7 @@ static struct platform_device *bcma_hcd_
- hci_dev = platform_device_alloc(ohci ? "ohci-platform" :
- "ehci-platform" , 0);
- if (!hci_dev)
-- return NULL;
-+ return ERR_PTR(-ENOMEM);
-
- hci_dev->dev.parent = &dev->dev;
- hci_dev->dev.dma_mask = &hci_dev->dev.coherent_dma_mask;
diff --git a/target/linux/bcm53xx/patches-3.18/184-USB-bcma-add-bcm53xx-support.patch b/target/linux/bcm53xx/patches-3.18/184-USB-bcma-add-bcm53xx-support.patch
deleted file mode 100644
index 920efdcab4..0000000000
--- a/target/linux/bcm53xx/patches-3.18/184-USB-bcma-add-bcm53xx-support.patch
+++ /dev/null
@@ -1,133 +0,0 @@
-From b65851f41c22b8c69b8fe9ca7782d19ed2155efc Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Thu, 11 Jun 2015 22:57:39 +0200
-Subject: [PATCH] USB: bcma: add bcm53xx support
-
-The Broadcom ARM SoCs with this usb core need a different
-initialization and they have a different core id. This patch adds
-support for these USB 2.0 core.
-
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/usb/host/bcma-hcd.c | 81 +++++++++++++++++++++++++++++++++++++++++++--
- 1 file changed, 78 insertions(+), 3 deletions(-)
-
---- a/drivers/usb/host/bcma-hcd.c
-+++ b/drivers/usb/host/bcma-hcd.c
-@@ -2,7 +2,8 @@
- * Broadcom specific Advanced Microcontroller Bus
- * Broadcom USB-core driver (BCMA bus glue)
- *
-- * Copyright 2011-2012 Hauke Mehrtens <hauke@hauke-m.de>
-+ * Copyright 2011-2015 Hauke Mehrtens <hauke@hauke-m.de>
-+ * Copyright 2015 Felix Fietkau <nbd@openwrt.org>
- *
- * Based on ssb-ohci driver
- * Copyright 2007 Michael Buesch <m@bues.ch>
-@@ -88,7 +89,7 @@ static void bcma_hcd_4716wa(struct bcma_
- }
-
- /* based on arch/mips/brcm-boards/bcm947xx/pcibios.c */
--static void bcma_hcd_init_chip(struct bcma_device *dev)
-+static void bcma_hcd_init_chip_mips(struct bcma_device *dev)
- {
- u32 tmp;
-
-@@ -159,6 +160,70 @@ static void bcma_hcd_init_chip(struct bc
- }
- }
-
-+static void bcma_hcd_init_chip_arm_phy(struct bcma_device *dev)
-+{
-+ struct bcma_device *arm_core;
-+ void __iomem *dmu;
-+
-+ arm_core = bcma_find_core(dev->bus, BCMA_CORE_ARMCA9);
-+ if (!arm_core) {
-+ dev_err(&dev->dev, "can not find ARM Cortex A9 ihost core\n");
-+ return;
-+ }
-+
-+ dmu = ioremap_nocache(arm_core->addr_s[0], 0x1000);
-+ if (!dmu) {
-+ dev_err(&dev->dev, "can not map ARM Cortex A9 ihost core\n");
-+ return;
-+ }
-+
-+ /* Unlock DMU PLL settings */
-+ iowrite32(0x0000ea68, dmu + 0x180);
-+
-+ /* Write USB 2.0 PLL control setting */
-+ iowrite32(0x00dd10c3, dmu + 0x164);
-+
-+ /* Lock DMU PLL settings */
-+ iowrite32(0x00000000, dmu + 0x180);
-+
-+ iounmap(dmu);
-+}
-+
-+static void bcma_hcd_init_chip_arm_hc(struct bcma_device *dev)
-+{
-+ u32 val;
-+
-+ /*
-+ * Delay after PHY initialized to ensure HC is ready to be configured
-+ */
-+ usleep_range(1000, 2000);
-+
-+ /* Set packet buffer OUT threshold */
-+ val = bcma_read32(dev, 0x94);
-+ val &= 0xffff;
-+ val |= 0x80 << 16;
-+ bcma_write32(dev, 0x94, val);
-+
-+ /* Enable break memory transfer */
-+ val = bcma_read32(dev, 0x9c);
-+ val |= 1;
-+ bcma_write32(dev, 0x9c, val);
-+}
-+
-+static void bcma_hcd_init_chip_arm(struct bcma_device *dev)
-+{
-+ bcma_core_enable(dev, 0);
-+
-+ if (dev->bus->chipinfo.id == BCMA_CHIP_ID_BCM4707 ||
-+ dev->bus->chipinfo.id == BCMA_CHIP_ID_BCM53018) {
-+ if (dev->bus->chipinfo.pkg == BCMA_PKG_ID_BCM4707 ||
-+ dev->bus->chipinfo.pkg == BCMA_PKG_ID_BCM4708)
-+ bcma_hcd_init_chip_arm_phy(dev);
-+
-+ bcma_hcd_init_chip_arm_hc(dev);
-+ }
-+}
-+
- static const struct usb_ehci_pdata ehci_pdata = {
- };
-
-@@ -230,7 +295,16 @@ static int bcma_hcd_probe(struct bcma_de
- if (!usb_dev)
- return -ENOMEM;
-
-- bcma_hcd_init_chip(dev);
-+ switch (dev->id.id) {
-+ case BCMA_CORE_NS_USB20:
-+ bcma_hcd_init_chip_arm(dev);
-+ break;
-+ case BCMA_CORE_USB20_HOST:
-+ bcma_hcd_init_chip_mips(dev);
-+ break;
-+ default:
-+ return -ENODEV;
-+ }
-
- /* In AI chips EHCI is addrspace 0, OHCI is 1 */
- ohci_addr = dev->addr_s[0];
-@@ -299,6 +373,7 @@ static int bcma_hcd_resume(struct bcma_d
-
- static const struct bcma_device_id bcma_hcd_table[] = {
- BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_USB20_HOST, BCMA_ANY_REV, BCMA_ANY_CLASS),
-+ BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_NS_USB20, BCMA_ANY_REV, BCMA_ANY_CLASS),
- BCMA_CORETABLE_END
- };
- MODULE_DEVICE_TABLE(bcma, bcma_hcd_table);
diff --git a/target/linux/bcm53xx/patches-3.18/185-USB-bcma-add-support-for-controlling-bus-power-throu.patch b/target/linux/bcm53xx/patches-3.18/185-USB-bcma-add-support-for-controlling-bus-power-throu.patch
deleted file mode 100644
index d9a8a1e621..0000000000
--- a/target/linux/bcm53xx/patches-3.18/185-USB-bcma-add-support-for-controlling-bus-power-throu.patch
+++ /dev/null
@@ -1,82 +0,0 @@
-From f3cf44a313b3687efd55ba091558e20a4d218c31 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Thu, 11 Jun 2015 22:57:40 +0200
-Subject: [PATCH] USB: bcma: add support for controlling bus power through GPIO
-
-On some boards a GPIO is needed to activate USB controller. Make it
-possible to specify such a GPIO in device tree.
-
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/usb/host/bcma-hcd.c | 24 ++++++++++++++++++++++++
- 1 file changed, 24 insertions(+)
-
---- a/drivers/usb/host/bcma-hcd.c
-+++ b/drivers/usb/host/bcma-hcd.c
-@@ -24,6 +24,8 @@
- #include <linux/platform_device.h>
- #include <linux/module.h>
- #include <linux/slab.h>
-+#include <linux/of.h>
-+#include <linux/of_gpio.h>
- #include <linux/usb/ehci_pdriver.h>
- #include <linux/usb/ohci_pdriver.h>
-
-@@ -224,6 +226,23 @@ static void bcma_hcd_init_chip_arm(struc
- }
- }
-
-+static void bcma_hci_platform_power_gpio(struct bcma_device *dev, bool val)
-+{
-+ int gpio;
-+
-+ gpio = of_get_named_gpio(dev->dev.of_node, "vcc-gpio", 0);
-+ if (!gpio_is_valid(gpio))
-+ return;
-+
-+ if (val) {
-+ gpio_request(gpio, "bcma-hcd-gpio");
-+ gpio_set_value(gpio, 1);
-+ } else {
-+ gpio_set_value(gpio, 0);
-+ gpio_free(gpio);
-+ }
-+}
-+
- static const struct usb_ehci_pdata ehci_pdata = {
- };
-
-@@ -295,6 +314,8 @@ static int bcma_hcd_probe(struct bcma_de
- if (!usb_dev)
- return -ENOMEM;
-
-+ bcma_hci_platform_power_gpio(dev, true);
-+
- switch (dev->id.id) {
- case BCMA_CORE_NS_USB20:
- bcma_hcd_init_chip_arm(dev);
-@@ -347,6 +368,7 @@ static void bcma_hcd_remove(struct bcma_
-
- static void bcma_hcd_shutdown(struct bcma_device *dev)
- {
-+ bcma_hci_platform_power_gpio(dev, false);
- bcma_core_disable(dev, 0);
- }
-
-@@ -354,6 +376,7 @@ static void bcma_hcd_shutdown(struct bcm
-
- static int bcma_hcd_suspend(struct bcma_device *dev)
- {
-+ bcma_hci_platform_power_gpio(dev, false);
- bcma_core_disable(dev, 0);
-
- return 0;
-@@ -361,6 +384,7 @@ static int bcma_hcd_suspend(struct bcma_
-
- static int bcma_hcd_resume(struct bcma_device *dev)
- {
-+ bcma_hci_platform_power_gpio(dev, true);
- bcma_core_enable(dev, 0);
-
- return 0;
diff --git a/target/linux/bcm53xx/patches-3.18/300-ARM-BCM5301X-Disable-MMU-and-Dcache-for-decompression.patch b/target/linux/bcm53xx/patches-3.18/300-ARM-BCM5301X-Disable-MMU-and-Dcache-for-decompression.patch
deleted file mode 100644
index 56db9c1577..0000000000
--- a/target/linux/bcm53xx/patches-3.18/300-ARM-BCM5301X-Disable-MMU-and-Dcache-for-decompression.patch
+++ /dev/null
@@ -1,195 +0,0 @@
-From 26023cdfacaf116545b1087b9d1fe50dc6fbda10 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Wed, 24 Sep 2014 22:14:07 +0200
-Subject: [PATCH] ARM: BCM5301X: Disable MMU and Dcache for decompression
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Without this fix kernel was randomly hanging in ~25% of tries during
-early init. Hangs used to happen at random places in the start_kernel.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- arch/arm/boot/compressed/Makefile | 5 +
- arch/arm/boot/compressed/head-bcm_5301x-mpcore.S | 37 +++++++
- arch/arm/boot/compressed/mpcore_cache.S | 118 +++++++++++++++++++++++
- 3 files changed, 160 insertions(+)
- create mode 100644 arch/arm/boot/compressed/head-bcm_5301x-mpcore.S
- create mode 100644 arch/arm/boot/compressed/mpcore_cache.S
-
---- a/arch/arm/boot/compressed/Makefile
-+++ b/arch/arm/boot/compressed/Makefile
-@@ -46,6 +46,11 @@ ifeq ($(CONFIG_ARCH_ACORN),y)
- OBJS += ll_char_wr.o font.o
- endif
-
-+ifeq ($(CONFIG_ARCH_BCM_5301X),y)
-+OBJS += head-bcm_5301x-mpcore.o
-+OBJS += mpcore_cache.o
-+endif
-+
- ifeq ($(CONFIG_ARCH_SA1100),y)
- OBJS += head-sa1100.o
- endif
---- /dev/null
-+++ b/arch/arm/boot/compressed/head-bcm_5301x-mpcore.S
-@@ -0,0 +1,37 @@
-+/*
-+ *
-+ * Platform specific tweaks. This is merged into head.S by the linker.
-+ *
-+ */
-+
-+#include <linux/linkage.h>
-+#include <asm/assembler.h>
-+#include <asm/cp15.h>
-+
-+ .section ".start", "ax"
-+
-+/*
-+ * This code section is spliced into the head code by the linker
-+ */
-+
-+__plat_uncompress_start:
-+
-+ @ Preserve r8/r7 i.e. kernel entry values
-+ mov r12, r8
-+
-+ @ Clear MMU enable and Dcache enable bits
-+ mrc p15, 0, r0, c1, c0, 0 @ Read SCTLR
-+ bic r0, #CR_C|CR_M
-+ mcr p15, 0, r0, c1, c0, 0 @ Write SCTLR
-+ nop
-+
-+ @ Call the cache invalidation routine
-+ bl v7_all_dcache_invalidate
-+ nop
-+ mov r0,#0
-+ ldr r3, =0x19022000 @ L2 cache controller, control reg
-+ str r0, [r3, #0x100] @ Disable L2 cache
-+ nop
-+
-+ @ Restore
-+ mov r8, r12
---- /dev/null
-+++ b/arch/arm/boot/compressed/mpcore_cache.S
-@@ -0,0 +1,118 @@
-+/*****************************************************************************
-+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
-+*
-+* Unless you and Broadcom execute a separate written software license
-+* agreement governing use of this software, this software is licensed to you
-+* under the terms of the GNU General Public License version 2, available at
-+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-+*
-+* Notwithstanding the above, under no circumstances may you combine this
-+* software in any way with any other Broadcom software provided under a
-+* license other than the GPL, without Broadcom's express prior written
-+* consent.
-+*****************************************************************************/
-+
-+#include <linux/linkage.h>
-+#include <linux/init.h>
-+
-+ __INIT
-+
-+/*
-+ * v7_l1_cache_invalidate
-+ *
-+ * Invalidate contents of L1 cache without flushing its contents
-+ * into outer cache and memory. This is needed when the contents
-+ * of the cache are unpredictable after power-up.
-+ *
-+ * corrupts r0-r6
-+ */
-+
-+ENTRY(v7_l1_cache_invalidate)
-+ mov r0, #0
-+ mcr p15, 2, r0, c0, c0, 0 @ set cache level to 1
-+ mrc p15, 1, r0, c0, c0, 0 @ read CLIDR
-+
-+ ldr r1, =0x7fff
-+ and r2, r1, r0, lsr #13 @ get max # of index size
-+
-+ ldr r1, =0x3ff
-+ and r3, r1, r0, lsr #3 @ NumWays - 1
-+ add r2, r2, #1 @ NumSets
-+
-+ and r0, r0, #0x7
-+ add r0, r0, #4 @ SetShift
-+
-+ clz r1, r3 @ WayShift
-+ add r4, r3, #1 @ NumWays
-+1: sub r2, r2, #1 @ NumSets--
-+ mov r3, r4 @ Temp = NumWays
-+2: subs r3, r3, #1 @ Temp--
-+ mov r5, r3, lsl r1
-+ mov r6, r2, lsl r0
-+ orr r5, r5, r6 @ Reg = (Temp<<WayShift)|(NumSets<<SetShift)
-+ mcr p15, 0, r5, c7, c6, 2 @ Invalidate line
-+ bgt 2b
-+ cmp r2, #0
-+ bgt 1b
-+ dsb
-+ mov r0,#0
-+ mcr p15,0,r0,c7,c5,0 /* Invalidate icache */
-+ isb
-+ mov pc, lr
-+ENDPROC(v7_l1_cache_invalidate)
-+
-+/*
-+ * v7_all_dcache_invalidate
-+ *
-+ * Invalidate without flushing the contents of all cache levels
-+ * accesible by the current processor core.
-+ * This is useful when the contents of cache memory are undetermined
-+ * at power-up.
-+ * Corrupted registers: r0-r7, r9-r11
-+ *
-+ * Based on cache-v7.S: v7_flush_dcache_all()
-+ */
-+
-+ENTRY(v7_all_dcache_invalidate)
-+ mrc p15, 1, r0, c0, c0, 1 @ read clidr
-+ ands r3, r0, #0x7000000 @ extract loc from clidr
-+ mov r3, r3, lsr #23 @ left align loc bit field
-+ beq finished @ if loc is 0, then no need to clean
-+ mov r10, #0 @ start clean at cache level 0
-+loop1:
-+ add r2, r10, r10, lsr #1 @ work out 3x current cache level
-+ mov r1, r0, lsr r2 @ extract cache type bits from clidr
-+ and r1, r1, #7 @ mask of bits for current cache only
-+ cmp r1, #2 @ see what cache we have at this level
-+ blt skip @ skip if no cache, or just i-cache
-+ mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr
-+ isb @ isb to sych the new cssr&csidr
-+ mrc p15, 1, r1, c0, c0, 0 @ read the new csidr
-+ and r2, r1, #7 @ extract the length of the cache lines
-+ add r2, r2, #4 @ add 4 (line length offset)
-+ ldr r4, =0x3ff
-+ ands r4, r4, r1, lsr #3 @ find maximum number on the way size
-+ clz r5, r4 @ find bit pos of way size increment
-+ ldr r7, =0x7fff
-+ ands r7, r7, r1, lsr #13 @ extract max number of the index size
-+loop2:
-+ mov r9, r4 @ create working copy of max way size
-+loop3:
-+ orr r11, r10, r9, lsl r5 @ factor way and cache number into r11
-+ orr r11, r11, r7, lsl r2 @ factor index number into r11
-+ mcr p15, 0, r11, c7, c6, 2 @ Invalidate line
-+ subs r9, r9, #1 @ decrement the way
-+ bge loop3
-+ subs r7, r7, #1 @ decrement the index
-+ bge loop2
-+skip:
-+ add r10, r10, #2 @ increment cache number
-+ cmp r3, r10
-+ bgt loop1
-+finished:
-+ mov r10, #0 @ swith back to cache level 0
-+ mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr
-+ dsb
-+ isb
-+ mov pc, lr
-+ENDPROC(v7_all_dcache_invalidate)
diff --git a/target/linux/bcm53xx/patches-3.18/301-ARM-BCM5301X-Add-SPROM.patch b/target/linux/bcm53xx/patches-3.18/301-ARM-BCM5301X-Add-SPROM.patch
deleted file mode 100644
index 3d054a80d6..0000000000
--- a/target/linux/bcm53xx/patches-3.18/301-ARM-BCM5301X-Add-SPROM.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From d404e0b22356078a51719fa911f6e09cb1a72d80 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Sun, 7 Jun 2015 16:18:18 +0200
-Subject: [PATCH] ARM: BCM5301X: Add SPROM
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- arch/arm/boot/dts/bcm5301x.dtsi | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -102,6 +102,10 @@
- };
- };
-
-+ sprom0: sprom@0 {
-+ compatible = "brcm,bcm47xx-sprom";
-+ };
-+
- axi@18000000 {
- compatible = "brcm,bus-axi";
- reg = <0x18000000 0x1000>;
diff --git a/target/linux/bcm53xx/patches-3.18/305-ARM-BCM53XX-set-customized-AUXCTL.patch b/target/linux/bcm53xx/patches-3.18/305-ARM-BCM53XX-set-customized-AUXCTL.patch
deleted file mode 100644
index a2bed2aeb7..0000000000
--- a/target/linux/bcm53xx/patches-3.18/305-ARM-BCM53XX-set-customized-AUXCTL.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 4a658590f83c1e916ab63ed7fe6f0841924247db Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Fri, 3 Oct 2014 18:37:33 +0200
-Subject: [PATCH 2/2] ARM: BCM53XX: set customized AUXCTL
-
-This activated some more features in the l310 cache.
-
-This is based on some vendor code
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/arm/mach-bcm/bcm_5301x.c | 5 ++++-
- 1 file changed, 4 insertions(+), 1 deletion(-)
-
---- a/arch/arm/mach-bcm/bcm_5301x.c
-+++ b/arch/arm/mach-bcm/bcm_5301x.c
-@@ -50,7 +50,12 @@ static const char __initconst *bcm5301x_
- };
-
- DT_MACHINE_START(BCM5301X, "BCM5301X")
-- .l2c_aux_val = 0,
-+ .l2c_aux_val = L310_AUX_CTRL_CACHE_REPLACE_RR |
-+ L310_AUX_CTRL_DATA_PREFETCH |
-+ L310_AUX_CTRL_INSTR_PREFETCH |
-+ L310_AUX_CTRL_EARLY_BRESP |
-+ L2C_AUX_CTRL_SHARED_OVERRIDE |
-+ L310_AUX_CTRL_FULL_LINE_ZERO,
- .l2c_aux_mask = ~0,
- .init_early = bcm5301x_init_early,
- .dt_compat = bcm5301x_dt_compat,
diff --git a/target/linux/bcm53xx/patches-3.18/320-ARM-BCM5301X-Add-Buffalo-WXR-1900DHP-clock-and-USB-p.patch b/target/linux/bcm53xx/patches-3.18/320-ARM-BCM5301X-Add-Buffalo-WXR-1900DHP-clock-and-USB-p.patch
deleted file mode 100644
index 802188db17..0000000000
--- a/target/linux/bcm53xx/patches-3.18/320-ARM-BCM5301X-Add-Buffalo-WXR-1900DHP-clock-and-USB-p.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From 504dba5b073a9009ae1e3f2fc53ea9c3aa10c38a Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@openwrt.org>
-Date: Wed, 13 May 2015 20:56:38 +0200
-Subject: [PATCH] ARM: BCM5301X: Add Buffalo WXR-1900DHP clock and USB power
- control
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 17 +++++++++++++++++
- 1 file changed, 17 insertions(+)
-
---- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-@@ -24,6 +24,23 @@
- reg = <0x00000000 0x08000000>;
- };
-
-+ clocks {
-+ clk_periph: periph {
-+ clock-frequency = <500000000>;
-+ };
-+ };
-+
-+ axi@18000000 {
-+ usb2@21000 {
-+ reg = <0x00021000 0x1000>;
-+
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
-+ };
-+ };
-+
- leds {
- compatible = "gpio-leds";
-
diff --git a/target/linux/bcm53xx/patches-3.18/321-ARM-BCM5301X-Set-vcc-gpio-for-USB-controllers.patch b/target/linux/bcm53xx/patches-3.18/321-ARM-BCM5301X-Set-vcc-gpio-for-USB-controllers.patch
deleted file mode 100644
index 871598f2e0..0000000000
--- a/target/linux/bcm53xx/patches-3.18/321-ARM-BCM5301X-Set-vcc-gpio-for-USB-controllers.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-From f1ee1275f65e87e035260f4d09a0f0ba98c6854d Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Sun, 21 Jun 2015 12:56:32 +0200
-Subject: [PATCH] ARM: BCM5301X: Set vcc-gpio for USB controllers
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 20 ++++++++++++++++++++
- arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 11 +++++++++++
- 2 files changed, 31 insertions(+)
-
---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-@@ -24,6 +24,26 @@
- reg = <0x00000000 0x08000000>;
- };
-
-+ axi@18000000 {
-+ usb2@21000 {
-+ reg = <0x00021000 0x1000>;
-+
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ usb3@23000 {
-+ reg = <0x00023000 0x1000>;
-+
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+
- spi {
- compatible = "spi-gpio";
- num-chipselects = <1>;
---- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-@@ -24,6 +24,17 @@
- reg = <0x00000000 0x08000000>;
- };
-
-+ axi@18000000 {
-+ usb3@23000 {
-+ reg = <0x00023000 0x1000>;
-+
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
-+ };
-+ };
-+
- leds {
- compatible = "gpio-leds";
-
diff --git a/target/linux/bcm53xx/patches-3.18/330-ARM-BCM5310X-Enable-earlyprintk-on-tested-devices.patch b/target/linux/bcm53xx/patches-3.18/330-ARM-BCM5310X-Enable-earlyprintk-on-tested-devices.patch
deleted file mode 100644
index 86025c10eb..0000000000
--- a/target/linux/bcm53xx/patches-3.18/330-ARM-BCM5310X-Enable-earlyprintk-on-tested-devices.patch
+++ /dev/null
@@ -1,159 +0,0 @@
-From eb1075cc48d3c315c7403822c33da9588ab76492 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Wed, 14 Jan 2015 08:33:25 +0100
-Subject: [PATCH] ARM: BCM5310X: Enable earlyprintk on tested devices
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 2 +-
- arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 2 +-
- arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts | 2 +-
- arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 2 +-
- 4 files changed, 4 insertions(+), 4 deletions(-)
-
---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-@@ -17,7 +17,7 @@
- model = "Buffalo WZR-1750DHP (BCM4708)";
-
- chosen {
-- bootargs = "console=ttyS0,115200";
-+ bootargs = "console=ttyS0,115200 earlyprintk";
- };
-
- memory {
---- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-@@ -17,7 +17,7 @@
- model = "Netgear R6250 V1 (BCM4708)";
-
- chosen {
-- bootargs = "console=ttyS0,115200";
-+ bootargs = "console=ttyS0,115200 earlyprintk";
- };
-
- memory {
---- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
-+++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
-@@ -17,7 +17,7 @@
- model = "Asus RT-N18U (BCM47081)";
-
- chosen {
-- bootargs = "console=ttyS0,115200";
-+ bootargs = "console=ttyS0,115200 earlyprintk";
- };
-
- memory {
---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-@@ -17,7 +17,7 @@
- model = "Buffalo WZR-600DHP2 (BCM47081)";
-
- chosen {
-- bootargs = "console=ttyS0,115200";
-+ bootargs = "console=ttyS0,115200 earlyprintk";
- };
-
- memory {
---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-@@ -17,7 +17,7 @@
- model = "Buffalo WZR-900DHP (BCM47081)";
-
- chosen {
-- bootargs = "console=ttyS0,115200";
-+ bootargs = "console=ttyS0,115200 earlyprintk";
- };
-
- memory {
---- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-@@ -17,7 +17,7 @@
- model = "Netgear R8000 (BCM4709)";
-
- chosen {
-- bootargs = "console=ttyS0,115200";
-+ bootargs = "console=ttyS0,115200 earlyprintk";
- };
-
- memory {
---- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
-+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
-@@ -17,7 +17,7 @@
- model = "Asus RT-AC56U (BCM4708)";
-
- chosen {
-- bootargs = "console=ttyS0,115200";
-+ bootargs = "console=ttyS0,115200 earlyprintk";
- };
-
- memory {
---- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
-+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
-@@ -17,7 +17,7 @@
- model = "Asus RT-AC68U (BCM4708)";
-
- chosen {
-- bootargs = "console=ttyS0,115200";
-+ bootargs = "console=ttyS0,115200 earlyprintk";
- };
-
- memory {
---- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-@@ -17,7 +17,7 @@
- model = "Luxul XWC-1000 (BCM4708)";
-
- chosen {
-- bootargs = "console=ttyS0,115200";
-+ bootargs = "console=ttyS0,115200 earlyprintk";
- };
-
- memory {
---- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-@@ -17,7 +17,7 @@
- model = "Buffalo WXR-1900DHP";
-
- chosen {
-- bootargs = "console=ttyS0,115200";
-+ bootargs = "console=ttyS0,115200 earlyprintk";
- };
-
- memory {
---- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
-+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
-@@ -17,7 +17,7 @@
- model = "SmartRG SR400ac";
-
- chosen {
-- bootargs = "console=ttyS0,115200";
-+ bootargs = "console=ttyS0,115200 earlyprintk";
- };
-
- memory {
---- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-@@ -16,7 +16,7 @@
- model = "Asus RT-AC87U";
-
- chosen {
-- bootargs = "console=ttyS0,115200";
-+ bootargs = "console=ttyS0,115200 earlyprintk";
- };
-
- memory {
---- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
-@@ -17,7 +17,7 @@
- model = "Netgear R7000";
-
- chosen {
-- bootargs = "console=ttyS0,115200";
-+ bootargs = "console=ttyS0,115200 earlyprintk";
- };
-
- memory {
diff --git a/target/linux/bcm53xx/patches-3.18/331-ARM-BCM5301X-Specify-RAM-on-devices-by-including-HIG.patch b/target/linux/bcm53xx/patches-3.18/331-ARM-BCM5301X-Specify-RAM-on-devices-by-including-HIG.patch
deleted file mode 100644
index 026ef8d564..0000000000
--- a/target/linux/bcm53xx/patches-3.18/331-ARM-BCM5301X-Specify-RAM-on-devices-by-including-HIG.patch
+++ /dev/null
@@ -1,173 +0,0 @@
-From 36b2fbb3badf0e32b371e1f7579a95d4fe25c0e1 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Wed, 14 Jan 2015 09:13:58 +0100
-Subject: [PATCH] ARM: BCM5301X: Specify RAM on devices by including HIGHMEM
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 3 ++-
- arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 3 ++-
- arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts | 3 ++-
- arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts | 3 ++-
- arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 3 ++-
- 5 files changed, 10 insertions(+), 5 deletions(-)
-
---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-@@ -21,7 +21,8 @@
- };
-
- memory {
-- reg = <0x00000000 0x08000000>;
-+ reg = <0x00000000 0x08000000
-+ 0x88000000 0x18000000>;
- };
-
- axi@18000000 {
---- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-@@ -21,7 +21,8 @@
- };
-
- memory {
-- reg = <0x00000000 0x08000000>;
-+ reg = <0x00000000 0x08000000
-+ 0x88000000 0x08000000>;
- };
-
- axi@18000000 {
---- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
-@@ -21,7 +21,8 @@
- };
-
- memory {
-- reg = <0x00000000 0x08000000>;
-+ reg = <0x00000000 0x08000000
-+ 0x88000000 0x08000000>;
- };
-
- leds {
---- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
-+++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
-@@ -21,7 +21,8 @@
- };
-
- memory {
-- reg = <0x00000000 0x08000000>;
-+ reg = <0x00000000 0x08000000
-+ 0x88000000 0x08000000>;
- };
-
- leds {
---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-@@ -21,7 +21,8 @@
- };
-
- memory {
-- reg = <0x00000000 0x08000000>;
-+ reg = <0x00000000 0x08000000
-+ 0x88000000 0x08000000>;
- };
-
- spi {
---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-@@ -21,7 +21,8 @@
- };
-
- memory {
-- reg = <0x00000000 0x08000000>;
-+ reg = <0x00000000 0x08000000
-+ 0x88000000 0x08000000>;
- };
-
- gpio-keys {
---- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-@@ -21,7 +21,8 @@
- };
-
- memory {
-- reg = <0x00000000 0x08000000>;
-+ reg = <0x00000000 0x08000000
-+ 0x88000000 0x08000000>;
- };
-
- leds {
---- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
-+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
-@@ -21,7 +21,8 @@
- };
-
- memory {
-- reg = <0x00000000 0x08000000>;
-+ reg = <0x00000000 0x08000000
-+ 0x88000000 0x08000000>;
- };
-
- leds {
---- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
-+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
-@@ -21,7 +21,8 @@
- };
-
- memory {
-- reg = <0x00000000 0x08000000>;
-+ reg = <0x00000000 0x08000000
-+ 0x88000000 0x08000000>;
- };
-
- leds {
---- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-@@ -21,7 +21,8 @@
- };
-
- memory {
-- reg = <0x00000000 0x08000000>;
-+ reg = <0x00000000 0x08000000
-+ 0x88000000 0x18000000>;
- };
-
- clocks {
---- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
-+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
-@@ -21,7 +21,8 @@
- };
-
- memory {
-- reg = <0x00000000 0x08000000>;
-+ reg = <0x00000000 0x08000000
-+ 0x88000000 0x08000000>;
- };
-
- leds {
---- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-@@ -20,7 +20,8 @@
- };
-
- memory {
-- reg = <0x00000000 0x08000000>;
-+ reg = <0x00000000 0x08000000
-+ 0x88000000 0x08000000>;
- };
-
- leds {
---- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
-@@ -21,7 +21,8 @@
- };
-
- memory {
-- reg = <0x00000000 0x08000000>;
-+ reg = <0x00000000 0x08000000
-+ 0x88000000 0x08000000>;
- };
-
- leds {
diff --git a/target/linux/bcm53xx/patches-3.18/332-ARM-BCM5301X-Add-power-button-for-Buffalo-WZR-1750DHP.patch b/target/linux/bcm53xx/patches-3.18/332-ARM-BCM5301X-Add-power-button-for-Buffalo-WZR-1750DHP.patch
deleted file mode 100644
index f9ca7eb7c1..0000000000
--- a/target/linux/bcm53xx/patches-3.18/332-ARM-BCM5301X-Add-power-button-for-Buffalo-WZR-1750DHP.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-From: Felix Fietkau <nbd@openwrt.org>
-Subject: [PATCH] ARM: BCM5301X: Add power button for Buffalo WZR-1750DHP
-
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
----
---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-@@ -123,6 +123,12 @@
- #address-cells = <1>;
- #size-cells = <0>;
-
-+ power {
-+ label = "Power";
-+ linux,code = <KEY_POWER>;
-+ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
-+ };
-+
- restart {
- label = "Reset";
- linux,code = <KEY_RESTART>;
diff --git a/target/linux/bcm53xx/patches-3.18/351-ARM-BCM5301X-Enable-ChipCommon-UART-on-untested-devi.patch b/target/linux/bcm53xx/patches-3.18/351-ARM-BCM5301X-Enable-ChipCommon-UART-on-untested-devi.patch
deleted file mode 100644
index 5fe4288576..0000000000
--- a/target/linux/bcm53xx/patches-3.18/351-ARM-BCM5301X-Enable-ChipCommon-UART-on-untested-devi.patch
+++ /dev/null
@@ -1,111 +0,0 @@
-From b49d7bb4825654f81bcee8e219028712811515a5 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Mon, 29 Jun 2015 08:11:36 +0200
-Subject: [PATCH] ARM: BCM5301X: Enable ChipCommon UART on untested devices
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts | 4 ++++
- arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts | 4 ++++
- arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts | 4 ++++
- arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts | 4 ++++
- arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts | 4 ++++
- arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts | 5 +++++
- arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 5 +++++
- arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 5 +++++
- 8 files changed, 35 insertions(+)
-
---- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
-+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
-@@ -96,3 +96,7 @@
- };
- };
- };
-+
-+&uart0 {
-+ status = "okay";
-+};
---- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
-+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
-@@ -83,3 +83,7 @@
- };
- };
- };
-+
-+&uart0 {
-+ status = "okay";
-+};
---- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
-@@ -83,3 +83,7 @@
- };
- };
- };
-+
-+&uart0 {
-+ status = "okay";
-+};
---- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
-+++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
-@@ -77,3 +77,7 @@
- };
- };
- };
-+
-+&uart0 {
-+ status = "okay";
-+};
---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-@@ -37,3 +37,7 @@
- };
- };
- };
-+
-+&uart0 {
-+ status = "okay";
-+};
---- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-@@ -64,3 +64,8 @@
- };
- };
- };
-+
-+&uart0 {
-+ status = "okay";
-+ clock-frequency = <125000000>;
-+};
---- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-@@ -144,3 +144,8 @@
- };
- };
- };
-+
-+&uart0 {
-+ status = "okay";
-+ clock-frequency = <125000000>;
-+};
---- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-@@ -77,3 +77,8 @@
- };
- };
- };
-+
-+&uart0 {
-+ status = "okay";
-+ clock-frequency = <125000000>;
-+};
---- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
-@@ -104,4 +104,5 @@
-
- &uart0 {
- status = "okay";
-+ clock-frequency = <125000000>;
- };
diff --git a/target/linux/bcm53xx/patches-3.18/352-ARM-BCM5301X-Add-back-Luxul-XWC-1000-NAND-flash-layo.patch b/target/linux/bcm53xx/patches-3.18/352-ARM-BCM5301X-Add-back-Luxul-XWC-1000-NAND-flash-layo.patch
deleted file mode 100644
index c3eae417c9..0000000000
--- a/target/linux/bcm53xx/patches-3.18/352-ARM-BCM5301X-Add-back-Luxul-XWC-1000-NAND-flash-layo.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From b97e582cd05f6ba80bdb63d9f677a3395edc7ff1 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Sun, 7 Jun 2015 15:37:43 +0200
-Subject: [PATCH] ARM: BCM5301X: Add back Luxul XWC-1000 NAND flash layout
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-In OpenWrt we still use old NAND driver instead of "brcm,nandcs", so
-we need to add this DT entry back.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts | 12 ++++++++++++
- 1 file changed, 12 insertions(+)
-
---- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-@@ -24,6 +24,18 @@
- reg = <0x00000000 0x08000000>;
- };
-
-+ axi@18000000 {
-+ nand@28000 {
-+ reg = <0x00028000 0x1000>;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ partition@0 {
-+ label = "ubi";
-+ reg = <0x00000000 0x08000000>;
-+ };
-+ };
-+ };
-+
- nand: nand@18028000 {
- nandcs@0 {
- partition@0 {
diff --git a/target/linux/bcm53xx/patches-3.18/400-mtd-bcm47xxpart-scan-whole-flash-on-ARCH_BCM_5301X.patch b/target/linux/bcm53xx/patches-3.18/400-mtd-bcm47xxpart-scan-whole-flash-on-ARCH_BCM_5301X.patch
deleted file mode 100644
index ccdb28b54d..0000000000
--- a/target/linux/bcm53xx/patches-3.18/400-mtd-bcm47xxpart-scan-whole-flash-on-ARCH_BCM_5301X.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From d658c21d6697293a928434fd6ac19264b5a8948d Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Fri, 30 Jan 2015 08:25:54 +0100
-Subject: [PATCH] mtd: bcm47xxpart: scan whole flash on ARCH_BCM_5301X
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- drivers/mtd/bcm47xxpart.c | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/drivers/mtd/bcm47xxpart.c
-+++ b/drivers/mtd/bcm47xxpart.c
-@@ -120,9 +120,15 @@ static int bcm47xxpart_parse(struct mtd_
- /* Parse block by block looking for magics */
- for (offset = 0; offset <= master->size - blocksize;
- offset += blocksize) {
-+#ifndef CONFIG_ARCH_BCM_5301X
-+ /*
-+ * ARM routers may have partitions in higher memory. E.g.
-+ * Netgear R8000 has board_data at 0x2600000.
-+ */
- /* Nothing more in higher memory */
- if (offset >= 0x2000000)
- break;
-+#endif
-
- if (curr_part >= BCM47XXPART_MAX_PARTS) {
- pr_warn("Reached maximum number of partitions, scanning stopped!\n");
diff --git a/target/linux/bcm53xx/patches-3.18/404-mtd-bcm53xxspiflash-new-driver-for-SPI-flahes-on-Bro.patch b/target/linux/bcm53xx/patches-3.18/404-mtd-bcm53xxspiflash-new-driver-for-SPI-flahes-on-Bro.patch
deleted file mode 100644
index 41ef3b300e..0000000000
--- a/target/linux/bcm53xx/patches-3.18/404-mtd-bcm53xxspiflash-new-driver-for-SPI-flahes-on-Bro.patch
+++ /dev/null
@@ -1,19 +0,0 @@
---- a/drivers/mtd/spi-nor/Kconfig
-+++ b/drivers/mtd/spi-nor/Kconfig
-@@ -28,4 +28,10 @@ config SPI_FSL_QUADSPI
- This enables support for the Quad SPI controller in master mode.
- We only connect the NOR to this controller now.
-
-+config MTD_SPI_BCM53XXSPIFLASH
-+ tristate "SPI-NOR flashes connected to the Broadcom ARM SoC"
-+ depends on MTD_SPI_NOR
-+ help
-+ SPI driver for flashes used on Broadcom ARM SoCs.
-+
- endif # MTD_SPI_NOR
---- a/drivers/mtd/spi-nor/Makefile
-+++ b/drivers/mtd/spi-nor/Makefile
-@@ -1,2 +1,3 @@
- obj-$(CONFIG_MTD_SPI_NOR) += spi-nor.o
- obj-$(CONFIG_SPI_FSL_QUADSPI) += fsl-quadspi.o
-+obj-$(CONFIG_MTD_SPI_BCM53XXSPIFLASH) += bcm53xxspiflash.o
diff --git a/target/linux/bcm53xx/patches-3.18/420-mtd-bcm5301x_nand.patch b/target/linux/bcm53xx/patches-3.18/420-mtd-bcm5301x_nand.patch
deleted file mode 100644
index 199f1e5500..0000000000
--- a/target/linux/bcm53xx/patches-3.18/420-mtd-bcm5301x_nand.patch
+++ /dev/null
@@ -1,1608 +0,0 @@
---- a/drivers/mtd/nand/Kconfig
-+++ b/drivers/mtd/nand/Kconfig
-@@ -516,4 +516,10 @@ config MTD_NAND_XWAY
- Enables support for NAND Flash chips on Lantiq XWAY SoCs. NAND is attached
- to the External Bus Unit (EBU).
-
-+config MTD_NAND_BCM
-+ tristate "Support for NAND on some Broadcom SoC"
-+ help
-+ This driver is currently used for the NAND flash controller on the
-+ Broadcom BCM5301X (NorthStar) SoCs.
-+
- endif # MTD_NAND
---- a/drivers/mtd/nand/Makefile
-+++ b/drivers/mtd/nand/Makefile
-@@ -50,5 +50,6 @@ obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740
- obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi-nand/
- obj-$(CONFIG_MTD_NAND_XWAY) += xway_nand.o
- obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH) += bcm47xxnflash/
-+obj-$(CONFIG_MTD_NAND_BCM) += bcm_nand.o
-
- nand-objs := nand_base.o nand_bbt.o nand_timings.o
---- /dev/null
-+++ b/drivers/mtd/nand/bcm_nand.c
-@@ -0,0 +1,1583 @@
-+/*
-+ * Nortstar NAND controller driver
-+ *
-+ * (c) Broadcom, Inc. 2012 All Rights Reserved.
-+ * Copyright 2014 Hauke Mehrtens <hauke@hauke-m.de>
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ *
-+ * This module interfaces the NAND controller and hardware ECC capabilities
-+ * tp the generic NAND chip support in the NAND library.
-+ *
-+ * Notes:
-+ * This driver depends on generic NAND driver, but works at the
-+ * page level for operations.
-+ *
-+ * When a page is written, the ECC calculated also protects the OOB
-+ * bytes not taken by ECC, and so the OOB must be combined with any
-+ * OOB data that preceded the page-write operation in order for the
-+ * ECC to be calculated correctly.
-+ * Also, when the page is erased, but OOB data is not, HW ECC will
-+ * indicate an error, because it checks OOB too, which calls for some
-+ * help from the software in this driver.
-+ *
-+ * TBD:
-+ * Block locking/unlocking support, OTP support
-+ */
-+
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/io.h>
-+#include <linux/ioport.h>
-+#include <linux/interrupt.h>
-+#include <linux/delay.h>
-+#include <linux/err.h>
-+#include <linux/slab.h>
-+#include <linux/bcma/bcma.h>
-+#include <linux/of_irq.h>
-+
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/nand.h>
-+#include <linux/mtd/partitions.h>
-+
-+#define NANDC_MAX_CHIPS 2 /* Only 2 CSn supported in NorthStar */
-+
-+/*
-+ * Driver private control structure
-+ */
-+struct bcmnand_ctrl {
-+ struct mtd_info mtd;
-+ struct nand_chip nand;
-+ struct bcma_device *core;
-+
-+ struct completion op_completion;
-+
-+ struct nand_ecclayout ecclayout;
-+ int cmd_ret; /* saved error code */
-+ unsigned char oob_index;
-+ unsigned char id_byte_index;
-+ unsigned char chip_num;
-+ unsigned char last_cmd;
-+ unsigned char ecc_level;
-+ unsigned char sector_size_shift;
-+ unsigned char sec_per_page_shift;
-+};
-+
-+
-+/*
-+ * IRQ numbers - offset from first irq in nandc_irq resource
-+ */
-+#define NANDC_IRQ_RD_MISS 0
-+#define NANDC_IRQ_ERASE_COMPLETE 1
-+#define NANDC_IRQ_COPYBACK_COMPLETE 2
-+#define NANDC_IRQ_PROGRAM_COMPLETE 3
-+#define NANDC_IRQ_CONTROLLER_RDY 4
-+#define NANDC_IRQ_RDBSY_RDY 5
-+#define NANDC_IRQ_ECC_UNCORRECTABLE 6
-+#define NANDC_IRQ_ECC_CORRECTABLE 7
-+#define NANDC_IRQ_NUM 8
-+
-+struct bcmnand_reg_field {
-+ unsigned int reg;
-+ unsigned int pos;
-+ unsigned int width;
-+};
-+
-+/*
-+ * REGISTERS
-+ *
-+ * Individual bit-fields aof registers are specificed here
-+ * for clarity, and the rest of the code will access each field
-+ * as if it was its own register.
-+ *
-+ * Following registers are off <reg_base>:
-+ */
-+#define REG_BIT_FIELD(r, p, w) ((struct bcmnand_reg_field){(r), (p), (w)})
-+
-+#define NANDC_8KB_PAGE_SUPPORT REG_BIT_FIELD(0x0, 31, 1)
-+#define NANDC_REV_MAJOR REG_BIT_FIELD(0x0, 8, 8)
-+#define NANDC_REV_MINOR REG_BIT_FIELD(0x0, 0, 8)
-+
-+#define NANDC_CMD_START_OPCODE REG_BIT_FIELD(0x4, 24, 5)
-+
-+#define NANDC_CMD_CS_SEL REG_BIT_FIELD(0x8, 16, 3)
-+#define NANDC_CMD_EXT_ADDR REG_BIT_FIELD(0x8, 0, 16)
-+
-+#define NANDC_CMD_ADDRESS REG_BIT_FIELD(0xc, 0, 32)
-+#define NANDC_CMD_END_ADDRESS REG_BIT_FIELD(0x10, 0, 32)
-+
-+#define NANDC_INT_STATUS REG_BIT_FIELD(0x14, 0, 32)
-+#define NANDC_INT_STAT_CTLR_RDY REG_BIT_FIELD(0x14, 31, 1)
-+#define NANDC_INT_STAT_FLASH_RDY REG_BIT_FIELD(0x14, 30, 1)
-+#define NANDC_INT_STAT_CACHE_VALID REG_BIT_FIELD(0x14, 29, 1)
-+#define NANDC_INT_STAT_SPARE_VALID REG_BIT_FIELD(0x14, 28, 1)
-+#define NANDC_INT_STAT_ERASED REG_BIT_FIELD(0x14, 27, 1)
-+#define NANDC_INT_STAT_PLANE_RDY REG_BIT_FIELD(0x14, 26, 1)
-+#define NANDC_INT_STAT_FLASH_STATUS REG_BIT_FIELD(0x14, 0, 8)
-+
-+#define NANDC_CS_LOCK REG_BIT_FIELD(0x18, 31, 1)
-+#define NANDC_CS_AUTO_CONFIG REG_BIT_FIELD(0x18, 30, 1)
-+#define NANDC_CS_NAND_WP REG_BIT_FIELD(0x18, 29, 1)
-+#define NANDC_CS_BLK0_WP REG_BIT_FIELD(0x18, 28, 1)
-+#define NANDC_CS_SW_USING_CS(n) REG_BIT_FIELD(0x18, 8+(n), 1)
-+#define NANDC_CS_MAP_SEL_CS(n) REG_BIT_FIELD(0x18, 0+(n), 1)
-+
-+#define NANDC_XOR_ADDR_BLK0_ONLY REG_BIT_FIELD(0x1c, 31, 1)
-+#define NANDC_XOR_ADDR_CS(n) REG_BIT_FIELD(0x1c, 0+(n), 1)
-+
-+#define NANDC_LL_OP_RET_IDLE REG_BIT_FIELD(0x20, 31, 1)
-+#define NANDC_LL_OP_CLE REG_BIT_FIELD(0x20, 19, 1)
-+#define NANDC_LL_OP_ALE REG_BIT_FIELD(0x20, 18, 1)
-+#define NANDC_LL_OP_WE REG_BIT_FIELD(0x20, 17, 1)
-+#define NANDC_LL_OP_RE REG_BIT_FIELD(0x20, 16, 1)
-+#define NANDC_LL_OP_DATA REG_BIT_FIELD(0x20, 0, 16)
-+
-+#define NANDC_MPLANE_ADDR_EXT REG_BIT_FIELD(0x24, 0, 16)
-+#define NANDC_MPLANE_ADDR REG_BIT_FIELD(0x28, 0, 32)
-+
-+#define NANDC_ACC_CTRL_CS(n) REG_BIT_FIELD(0x50+((n)<<4), 0, 32)
-+#define NANDC_ACC_CTRL_RD_ECC(n) REG_BIT_FIELD(0x50+((n)<<4), 31, 1)
-+#define NANDC_ACC_CTRL_WR_ECC(n) REG_BIT_FIELD(0x50+((n)<<4), 30, 1)
-+#define NANDC_ACC_CTRL_CE_CARE(n) REG_BIT_FIELD(0x50+((n)<<4), 29, 1)
-+#define NANDC_ACC_CTRL_PGM_RDIN(n) REG_BIT_FIELD(0x50+((n)<<4), 28, 1)
-+#define NANDC_ACC_CTRL_ERA_ECC_ERR(n) REG_BIT_FIELD(0x50+((n)<<4), 27, 1)
-+#define NANDC_ACC_CTRL_PGM_PARTIAL(n) REG_BIT_FIELD(0x50+((n)<<4), 26, 1)
-+#define NANDC_ACC_CTRL_WR_PREEMPT(n) REG_BIT_FIELD(0x50+((n)<<4), 25, 1)
-+#define NANDC_ACC_CTRL_PG_HIT(n) REG_BIT_FIELD(0x50+((n)<<4), 24, 1)
-+#define NANDC_ACC_CTRL_PREFETCH(n) REG_BIT_FIELD(0x50+((n)<<4), 23, 1)
-+#define NANDC_ACC_CTRL_CACHE_MODE(n) REG_BIT_FIELD(0x50+((n)<<4), 22, 1)
-+#define NANDC_ACC_CTRL_CACHE_LASTPG(n) REG_BIT_FIELD(0x50+((n)<<4), 21, 1)
-+#define NANDC_ACC_CTRL_ECC_LEVEL(n) REG_BIT_FIELD(0x50+((n)<<4), 16, 5)
-+#define NANDC_ACC_CTRL_SECTOR_1K(n) REG_BIT_FIELD(0x50+((n)<<4), 7, 1)
-+#define NANDC_ACC_CTRL_SPARE_SIZE(n) REG_BIT_FIELD(0x50+((n)<<4), 0, 7)
-+
-+#define NANDC_CONFIG_CS(n) REG_BIT_FIELD(0x54+((n)<<4), 0, 32)
-+#define NANDC_CONFIG_LOCK(n) REG_BIT_FIELD(0x54+((n)<<4), 31, 1)
-+#define NANDC_CONFIG_BLK_SIZE(n) REG_BIT_FIELD(0x54+((n)<<4), 28, 3)
-+#define NANDC_CONFIG_CHIP_SIZE(n) REG_BIT_FIELD(0x54+((n)<<4), 24, 4)
-+#define NANDC_CONFIG_CHIP_WIDTH(n) REG_BIT_FIELD(0x54+((n)<<4), 23, 1)
-+#define NANDC_CONFIG_PAGE_SIZE(n) REG_BIT_FIELD(0x54+((n)<<4), 20, 2)
-+#define NANDC_CONFIG_FUL_ADDR_BYTES(n) REG_BIT_FIELD(0x54+((n)<<4), 16, 3)
-+#define NANDC_CONFIG_COL_ADDR_BYTES(n) REG_BIT_FIELD(0x54+((n)<<4), 12, 3)
-+#define NANDC_CONFIG_BLK_ADDR_BYTES(n) REG_BIT_FIELD(0x54+((n)<<4), 8, 3)
-+
-+#define NANDC_TIMING_1_CS(n) REG_BIT_FIELD(0x58+((n)<<4), 0, 32)
-+#define NANDC_TIMING_2_CS(n) REG_BIT_FIELD(0x5c+((n)<<4), 0, 32)
-+ /* Individual bits for Timing registers - TBD */
-+
-+#define NANDC_CORR_STAT_THRESH_CS(n) REG_BIT_FIELD(0xc0, 6*(n), 6)
-+
-+#define NANDC_BLK_WP_END_ADDR REG_BIT_FIELD(0xc8, 0, 32)
-+
-+#define NANDC_MPLANE_ERASE_CYC2_OPCODE REG_BIT_FIELD(0xcc, 24, 8)
-+#define NANDC_MPLANE_READ_STAT_OPCODE REG_BIT_FIELD(0xcc, 16, 8)
-+#define NANDC_MPLANE_PROG_ODD_OPCODE REG_BIT_FIELD(0xcc, 8, 8)
-+#define NANDC_MPLANE_PROG_TRL_OPCODE REG_BIT_FIELD(0xcc, 0, 8)
-+
-+#define NANDC_MPLANE_PGCACHE_TRL_OPCODE REG_BIT_FIELD(0xd0, 24, 8)
-+#define NANDC_MPLANE_READ_STAT2_OPCODE REG_BIT_FIELD(0xd0, 16, 8)
-+#define NANDC_MPLANE_READ_EVEN_OPCODE REG_BIT_FIELD(0xd0, 8, 8)
-+#define NANDC_MPLANE_READ_ODD__OPCODE REG_BIT_FIELD(0xd0, 0, 8)
-+
-+#define NANDC_MPLANE_CTRL_ERASE_CYC2_EN REG_BIT_FIELD(0xd4, 31, 1)
-+#define NANDC_MPLANE_CTRL_RD_ADDR_SIZE REG_BIT_FIELD(0xd4, 30, 1)
-+#define NANDC_MPLANE_CTRL_RD_CYC_ADDR REG_BIT_FIELD(0xd4, 29, 1)
-+#define NANDC_MPLANE_CTRL_RD_COL_ADDR REG_BIT_FIELD(0xd4, 28, 1)
-+
-+#define NANDC_UNCORR_ERR_COUNT REG_BIT_FIELD(0xfc, 0, 32)
-+
-+#define NANDC_CORR_ERR_COUNT REG_BIT_FIELD(0x100, 0, 32)
-+
-+#define NANDC_READ_CORR_BIT_COUNT REG_BIT_FIELD(0x104, 0, 32)
-+
-+#define NANDC_BLOCK_LOCK_STATUS REG_BIT_FIELD(0x108, 0, 8)
-+
-+#define NANDC_ECC_CORR_ADDR_CS REG_BIT_FIELD(0x10c, 16, 3)
-+#define NANDC_ECC_CORR_ADDR_EXT REG_BIT_FIELD(0x10c, 0, 16)
-+
-+#define NANDC_ECC_CORR_ADDR REG_BIT_FIELD(0x110, 0, 32)
-+
-+#define NANDC_ECC_UNC_ADDR_CS REG_BIT_FIELD(0x114, 16, 3)
-+#define NANDC_ECC_UNC_ADDR_EXT REG_BIT_FIELD(0x114, 0, 16)
-+
-+#define NANDC_ECC_UNC_ADDR REG_BIT_FIELD(0x118, 0, 32)
-+
-+#define NANDC_READ_ADDR_CS REG_BIT_FIELD(0x11c, 16, 3)
-+#define NANDC_READ_ADDR_EXT REG_BIT_FIELD(0x11c, 0, 16)
-+#define NANDC_READ_ADDR REG_BIT_FIELD(0x120, 0, 32)
-+
-+#define NANDC_PROG_ADDR_CS REG_BIT_FIELD(0x124, 16, 3)
-+#define NANDC_PROG_ADDR_EXT REG_BIT_FIELD(0x124, 0, 16)
-+#define NANDC_PROG_ADDR REG_BIT_FIELD(0x128, 0, 32)
-+
-+#define NANDC_CPYBK_ADDR_CS REG_BIT_FIELD(0x12c, 16, 3)
-+#define NANDC_CPYBK_ADDR_EXT REG_BIT_FIELD(0x12c, 0, 16)
-+#define NANDC_CPYBK_ADDR REG_BIT_FIELD(0x130, 0, 32)
-+
-+#define NANDC_ERASE_ADDR_CS REG_BIT_FIELD(0x134, 16, 3)
-+#define NANDC_ERASE_ADDR_EXT REG_BIT_FIELD(0x134, 0, 16)
-+#define NANDC_ERASE_ADDR REG_BIT_FIELD(0x138, 0, 32)
-+
-+#define NANDC_INV_READ_ADDR_CS REG_BIT_FIELD(0x13c, 16, 3)
-+#define NANDC_INV_READ_ADDR_EXT REG_BIT_FIELD(0x13c, 0, 16)
-+#define NANDC_INV_READ_ADDR REG_BIT_FIELD(0x140, 0, 32)
-+
-+#define NANDC_INIT_STAT REG_BIT_FIELD(0x144, 0, 32)
-+#define NANDC_INIT_ONFI_DONE REG_BIT_FIELD(0x144, 31, 1)
-+#define NANDC_INIT_DEVID_DONE REG_BIT_FIELD(0x144, 30, 1)
-+#define NANDC_INIT_SUCCESS REG_BIT_FIELD(0x144, 29, 1)
-+#define NANDC_INIT_FAIL REG_BIT_FIELD(0x144, 28, 1)
-+#define NANDC_INIT_BLANK REG_BIT_FIELD(0x144, 27, 1)
-+#define NANDC_INIT_TIMEOUT REG_BIT_FIELD(0x144, 26, 1)
-+#define NANDC_INIT_UNC_ERROR REG_BIT_FIELD(0x144, 25, 1)
-+#define NANDC_INIT_CORR_ERROR REG_BIT_FIELD(0x144, 24, 1)
-+#define NANDC_INIT_PARAM_RDY REG_BIT_FIELD(0x144, 23, 1)
-+#define NANDC_INIT_AUTH_FAIL REG_BIT_FIELD(0x144, 22, 1)
-+
-+#define NANDC_ONFI_STAT REG_BIT_FIELD(0x148, 0, 32)
-+#define NANDC_ONFI_DEBUG REG_BIT_FIELD(0x148, 28, 4)
-+#define NANDC_ONFI_PRESENT REG_BIT_FIELD(0x148, 27, 1)
-+#define NANDC_ONFI_BADID_PG2 REG_BIT_FIELD(0x148, 5, 1)
-+#define NANDC_ONFI_BADID_PG1 REG_BIT_FIELD(0x148, 4, 1)
-+#define NANDC_ONFI_BADID_PG0 REG_BIT_FIELD(0x148, 3, 1)
-+#define NANDC_ONFI_BADCRC_PG2 REG_BIT_FIELD(0x148, 2, 1)
-+#define NANDC_ONFI_BADCRC_PG1 REG_BIT_FIELD(0x148, 1, 1)
-+#define NANDC_ONFI_BADCRC_PG0 REG_BIT_FIELD(0x148, 0, 1)
-+
-+#define NANDC_ONFI_DEBUG_DATA REG_BIT_FIELD(0x14c, 0, 32)
-+
-+#define NANDC_SEMAPHORE REG_BIT_FIELD(0x150, 0, 8)
-+
-+#define NANDC_DEVID_BYTE(b) REG_BIT_FIELD(0x194+((b)&0x4), \
-+ 24-(((b)&3)<<3), 8)
-+
-+#define NANDC_LL_RDDATA REG_BIT_FIELD(0x19c, 0, 16)
-+
-+#define NANDC_INT_N_REG(n) REG_BIT_FIELD(0xf00|((n)<<2), 0, 1)
-+#define NANDC_INT_DIREC_READ_MISS REG_BIT_FIELD(0xf00, 0, 1)
-+#define NANDC_INT_ERASE_DONE REG_BIT_FIELD(0xf04, 0, 1)
-+#define NANDC_INT_CPYBK_DONE REG_BIT_FIELD(0xf08, 0, 1)
-+#define NANDC_INT_PROGRAM_DONE REG_BIT_FIELD(0xf0c, 0, 1)
-+#define NANDC_INT_CONTROLLER_RDY REG_BIT_FIELD(0xf10, 0, 1)
-+#define NANDC_INT_RDBSY_RDY REG_BIT_FIELD(0xf14, 0, 1)
-+#define NANDC_INT_ECC_UNCORRECTABLE REG_BIT_FIELD(0xf18, 0, 1)
-+#define NANDC_INT_ECC_CORRECTABLE REG_BIT_FIELD(0xf1c, 0, 1)
-+
-+/*
-+ * Following registers are treated as contigous IO memory, offset is from
-+ * <reg_base>, and the data is in big-endian byte order
-+ */
-+#define NANDC_SPARE_AREA_READ_OFF 0x200
-+#define NANDC_SPARE_AREA_WRITE_OFF 0x280
-+#define NANDC_CACHE_OFF 0x400
-+#define NANDC_CACHE_SIZE (128*4)
-+
-+struct bcmnand_areg_field {
-+ unsigned int reg;
-+ unsigned int pos;
-+ unsigned int width;
-+};
-+
-+/*
-+ * Following are IDM (a.k.a. Slave Wrapper) registers are off <idm_base>:
-+ */
-+#define IDMREG_BIT_FIELD(r, p, w) ((struct bcmnand_areg_field){(r), (p), (w)})
-+
-+#define NANDC_IDM_AXI_BIG_ENDIAN IDMREG_BIT_FIELD(0x408, 28, 1)
-+#define NANDC_IDM_APB_LITTLE_ENDIAN IDMREG_BIT_FIELD(0x408, 24, 1)
-+#define NANDC_IDM_TM IDMREG_BIT_FIELD(0x408, 16, 5)
-+#define NANDC_IDM_IRQ_CORRECABLE_EN IDMREG_BIT_FIELD(0x408, 9, 1)
-+#define NANDC_IDM_IRQ_UNCORRECABLE_EN IDMREG_BIT_FIELD(0x408, 8, 1)
-+#define NANDC_IDM_IRQ_RDYBSY_RDY_EN IDMREG_BIT_FIELD(0x408, 7, 1)
-+#define NANDC_IDM_IRQ_CONTROLLER_RDY_EN IDMREG_BIT_FIELD(0x408, 6, 1)
-+#define NANDC_IDM_IRQ_PRPOGRAM_COMP_EN IDMREG_BIT_FIELD(0x408, 5, 1)
-+#define NANDC_IDM_IRQ_COPYBK_COMP_EN IDMREG_BIT_FIELD(0x408, 4, 1)
-+#define NANDC_IDM_IRQ_ERASE_COMP_EN IDMREG_BIT_FIELD(0x408, 3, 1)
-+#define NANDC_IDM_IRQ_READ_MISS_EN IDMREG_BIT_FIELD(0x408, 2, 1)
-+#define NANDC_IDM_IRQ_N_EN(n) IDMREG_BIT_FIELD(0x408, 2+(n), 1)
-+
-+#define NANDC_IDM_CLOCK_EN IDMREG_BIT_FIELD(0x408, 0, 1)
-+
-+#define NANDC_IDM_IO_ECC_CORR IDMREG_BIT_FIELD(0x500, 3, 1)
-+#define NANDC_IDM_IO_ECC_UNCORR IDMREG_BIT_FIELD(0x500, 2, 1)
-+#define NANDC_IDM_IO_RDYBSY IDMREG_BIT_FIELD(0x500, 1, 1)
-+#define NANDC_IDM_IO_CTRL_RDY IDMREG_BIT_FIELD(0x500, 0, 1)
-+
-+#define NANDC_IDM_RESET IDMREG_BIT_FIELD(0x800, 0, 1)
-+ /* Remaining IDM registers do not seem to be useful, skipped */
-+
-+/*
-+ * NAND Controller has its own command opcodes
-+ * different from opcodes sent to the actual flash chip
-+ */
-+#define NANDC_CMD_OPCODE_NULL 0
-+#define NANDC_CMD_OPCODE_PAGE_READ 1
-+#define NANDC_CMD_OPCODE_SPARE_READ 2
-+#define NANDC_CMD_OPCODE_STATUS_READ 3
-+#define NANDC_CMD_OPCODE_PAGE_PROG 4
-+#define NANDC_CMD_OPCODE_SPARE_PROG 5
-+#define NANDC_CMD_OPCODE_DEVID_READ 7
-+#define NANDC_CMD_OPCODE_BLOCK_ERASE 8
-+#define NANDC_CMD_OPCODE_FLASH_RESET 9
-+
-+/*
-+ * NAND Controller hardware ECC data size
-+ *
-+ * The following table contains the number of bytes needed for
-+ * each of the ECC levels, per "sector", which is either 512 or 1024 bytes.
-+ * The actual layout is as follows:
-+ * The entire spare area is equally divided into as many sections as there
-+ * are sectors per page, and the ECC data is located at the end of each
-+ * of these sections.
-+ * For example, given a 2K per page and 64 bytes spare device, configured for
-+ * sector size 1k and ECC level of 4, the spare area will be divided into 2
-+ * sections 32 bytes each, and the last 14 bytes of 32 in each section will
-+ * be filled with ECC data.
-+ * Note: the name of the algorythm and the number of error bits it can correct
-+ * is of no consequence to this driver, therefore omitted.
-+ */
-+struct bcmnand_ecc_size_s {
-+ unsigned char sector_size_shift;
-+ unsigned char ecc_level;
-+ unsigned char ecc_bytes_per_sec;
-+ unsigned char reserved;
-+};
-+
-+static const struct bcmnand_ecc_size_s bcmnand_ecc_sizes[] = {
-+ { 9, 0, 0 },
-+ { 10, 0, 0 },
-+ { 9, 1, 2 },
-+ { 10, 1, 4 },
-+ { 9, 2, 4 },
-+ { 10, 2, 7 },
-+ { 9, 3, 6 },
-+ { 10, 3, 11 },
-+ { 9, 4, 7 },
-+ { 10, 4, 14 },
-+ { 9, 5, 9 },
-+ { 10, 5, 18 },
-+ { 9, 6, 11 },
-+ { 10, 6, 21 },
-+ { 9, 7, 13 },
-+ { 10, 7, 25 },
-+ { 9, 8, 14 },
-+ { 10, 8, 28 },
-+
-+ { 9, 9, 16 },
-+ { 9, 10, 18 },
-+ { 9, 11, 20 },
-+ { 9, 12, 21 },
-+
-+ { 10, 9, 32 },
-+ { 10, 10, 35 },
-+ { 10, 11, 39 },
-+ { 10, 12, 42 },
-+};
-+
-+/*
-+ * Populate the various fields that depend on how
-+ * the hardware ECC data is located in the spare area
-+ *
-+ * For this controiller, it is easier to fill-in these
-+ * structures at run time.
-+ *
-+ * The bad-block marker is assumed to occupy one byte
-+ * at chip->badblockpos, which must be in the first
-+ * sector of the spare area, namely it is either
-+ * at offset 0 or 5.
-+ * Some chips use both for manufacturer's bad block
-+ * markers, but we ingore that issue here, and assume only
-+ * one byte is used as bad-block marker always.
-+ */
-+static int bcmnand_hw_ecc_layout(struct bcmnand_ctrl *ctrl)
-+{
-+ struct nand_ecclayout *layout;
-+ struct device *dev = &ctrl->core->dev;
-+ unsigned int i, j, k;
-+ unsigned int ecc_per_sec, oob_per_sec;
-+ unsigned int bbm_pos = ctrl->nand.badblockpos;
-+
-+ /* Caclculate spare area per sector size */
-+ oob_per_sec = ctrl->mtd.oobsize >> ctrl->sec_per_page_shift;
-+
-+ /* Try to calculate the amount of ECC bytes per sector with a formula */
-+ if (ctrl->sector_size_shift == 9)
-+ ecc_per_sec = ((ctrl->ecc_level * 14) + 7) >> 3;
-+ else if (ctrl->sector_size_shift == 10)
-+ ecc_per_sec = ((ctrl->ecc_level * 14) + 3) >> 2;
-+ else
-+ ecc_per_sec = oob_per_sec + 1; /* cause an error if not in table */
-+
-+ /* Now find out the answer according to the table */
-+ for (i = 0; i < ARRAY_SIZE(bcmnand_ecc_sizes); i++) {
-+ if (bcmnand_ecc_sizes[i].ecc_level == ctrl->ecc_level &&
-+ bcmnand_ecc_sizes[i].sector_size_shift ==
-+ ctrl->sector_size_shift) {
-+ break;
-+ }
-+ }
-+
-+ /* Table match overrides formula */
-+ if (bcmnand_ecc_sizes[i].ecc_level == ctrl->ecc_level &&
-+ bcmnand_ecc_sizes[i].sector_size_shift == ctrl->sector_size_shift)
-+ ecc_per_sec = bcmnand_ecc_sizes[i].ecc_bytes_per_sec;
-+
-+ /* Return an error if calculated ECC leaves no room for OOB */
-+ if ((ctrl->sec_per_page_shift != 0 && ecc_per_sec >= oob_per_sec) ||
-+ (ctrl->sec_per_page_shift == 0 && ecc_per_sec >= (oob_per_sec - 1))) {
-+ dev_err(dev, "ECC level %d too high, leaves no room for OOB data\n",
-+ ctrl->ecc_level);
-+ return -EINVAL;
-+ }
-+
-+ /* Fill in the needed fields */
-+ ctrl->nand.ecc.size = ctrl->mtd.writesize >> ctrl->sec_per_page_shift;
-+ ctrl->nand.ecc.bytes = ecc_per_sec;
-+ ctrl->nand.ecc.steps = 1 << ctrl->sec_per_page_shift;
-+ ctrl->nand.ecc.total = ecc_per_sec << ctrl->sec_per_page_shift;
-+ ctrl->nand.ecc.strength = ctrl->ecc_level;
-+
-+ /* Build an ecc layout data structure */
-+ layout = &ctrl->ecclayout;
-+ memset(layout, 0, sizeof(*layout));
-+
-+ /* Total number of bytes used by HW ECC */
-+ layout->eccbytes = ecc_per_sec << ctrl->sec_per_page_shift;
-+
-+ /* Location for each of the HW ECC bytes */
-+ for (i = j = 0, k = 1;
-+ i < ARRAY_SIZE(layout->eccpos) && i < layout->eccbytes;
-+ i++, j++) {
-+ /* switch sector # */
-+ if (j == ecc_per_sec) {
-+ j = 0;
-+ k++;
-+ }
-+ /* save position of each HW-generated ECC byte */
-+ layout->eccpos[i] = (oob_per_sec * k) - ecc_per_sec + j;
-+
-+ /* Check that HW ECC does not overlap bad-block marker */
-+ if (bbm_pos == layout->eccpos[i]) {
-+ dev_err(dev, "ECC level %d too high, HW ECC collides with bad-block marker position\n",
-+ ctrl->ecc_level);
-+ return -EINVAL;
-+ }
-+ }
-+
-+ /* Location of all user-available OOB byte-ranges */
-+ for (i = 0; i < ARRAY_SIZE(layout->oobfree); i++) {
-+ struct nand_oobfree *oobfree = &layout->oobfree[i];
-+
-+ if (i >= (1 << ctrl->sec_per_page_shift))
-+ break;
-+ oobfree->offset = oob_per_sec * i;
-+ oobfree->length = oob_per_sec - ecc_per_sec;
-+
-+ /* Bad-block marker must be in the first sector spare area */
-+ if (WARN_ON(bbm_pos >= (oobfree->offset + oobfree->length)))
-+ return -EINVAL;
-+
-+ if (i != 0)
-+ continue;
-+
-+ /* Remove bad-block marker from available byte range */
-+ if (bbm_pos == oobfree->offset) {
-+ oobfree->offset += 1;
-+ oobfree->length -= 1;
-+ } else if (bbm_pos == (oobfree->offset + oobfree->length - 1)) {
-+ oobfree->length -= 1;
-+ } else {
-+ layout->oobfree[i + 1].offset = bbm_pos + 1;
-+ layout->oobfree[i + 1].length =
-+ oobfree->length - bbm_pos - 1;
-+ oobfree->length = bbm_pos;
-+ i++;
-+ }
-+ }
-+
-+ layout->oobavail = ((oob_per_sec - ecc_per_sec)
-+ << ctrl->sec_per_page_shift) - 1;
-+
-+ ctrl->mtd.oobavail = layout->oobavail;
-+ ctrl->nand.ecc.layout = layout;
-+
-+ /* Output layout for debugging */
-+ dev_dbg(dev, "Spare area=%d eccbytes %d, ecc bytes located at:\n",
-+ ctrl->mtd.oobsize, layout->eccbytes);
-+ for (i = j = 0;
-+ i < ARRAY_SIZE(layout->eccpos) && i < layout->eccbytes; i++)
-+ pr_debug(" %d", layout->eccpos[i]);
-+ pr_debug("\n");
-+
-+ dev_dbg(dev, "Available %d bytes at (off,len):\n", layout->oobavail);
-+ for (i = 0; i < ARRAY_SIZE(layout->oobfree); i++)
-+ pr_debug("(%d,%d) ", layout->oobfree[i].offset,
-+ layout->oobfree[i].length);
-+ pr_debug("\n");
-+
-+ return 0;
-+}
-+
-+/*
-+ * Register bit-field manipulation routines
-+ */
-+
-+static inline unsigned int bcmnand_reg_read(struct bcmnand_ctrl *ctrl,
-+ struct bcmnand_reg_field rbf)
-+{
-+ u32 val;
-+
-+ val = bcma_read32(ctrl->core, rbf.reg);
-+ val >>= rbf.pos;
-+ val &= (1 << rbf.width) - 1;
-+
-+ return val;
-+}
-+
-+static inline void bcmnand_reg_write(struct bcmnand_ctrl *ctrl,
-+ struct bcmnand_reg_field rbf,
-+ unsigned newval)
-+{
-+ u32 val, msk;
-+
-+ msk = (1 << rbf.width) - 1;
-+ msk <<= rbf.pos;
-+ newval <<= rbf.pos;
-+ newval &= msk;
-+
-+ val = bcma_read32(ctrl->core, rbf.reg);
-+ val &= ~msk;
-+ val |= newval;
-+ bcma_write32(ctrl->core, rbf.reg, val);
-+}
-+
-+static inline unsigned int bcmnand_reg_aread(struct bcmnand_ctrl *ctrl,
-+ struct bcmnand_areg_field rbf)
-+{
-+ u32 val;
-+
-+ val = bcma_aread32(ctrl->core, rbf.reg);
-+ val >>= rbf.pos;
-+ val &= (1 << rbf.width) - 1;
-+
-+ return val;
-+}
-+
-+static inline void bcmnand_reg_awrite(struct bcmnand_ctrl *ctrl,
-+ struct bcmnand_areg_field rbf,
-+ unsigned int newval)
-+{
-+ u32 val, msk;
-+
-+ msk = (1 << rbf.width) - 1;
-+ msk <<= rbf.pos;
-+ newval <<= rbf.pos;
-+ newval &= msk;
-+
-+ val = bcma_aread32(ctrl->core, rbf.reg);
-+ val &= ~msk;
-+ val |= newval;
-+ bcma_awrite32(ctrl->core, rbf.reg, val);
-+}
-+
-+/*
-+ * NAND Interface - dev_ready
-+ *
-+ * Return 1 iff device is ready, 0 otherwise
-+ */
-+static int bcmnand_dev_ready(struct mtd_info *mtd)
-+{
-+ struct nand_chip *chip = mtd->priv;
-+ struct bcmnand_ctrl *ctrl = chip->priv;
-+
-+ return bcmnand_reg_aread(ctrl, NANDC_IDM_IO_CTRL_RDY);
-+}
-+
-+/*
-+ * Interrupt service routines
-+ */
-+static irqreturn_t bcmnand_isr(int irq, void *dev_id)
-+{
-+ struct bcmnand_ctrl *ctrl = dev_id;
-+ int irq_off;
-+
-+ irq_off = irq - ctrl->core->irq;
-+ WARN_ON(irq_off < 0 || irq_off >= NANDC_IRQ_NUM);
-+
-+ if (!bcmnand_reg_read(ctrl, NANDC_INT_N_REG(irq_off)))
-+ return IRQ_NONE;
-+
-+ /* Acknowledge interrupt */
-+ bcmnand_reg_write(ctrl, NANDC_INT_N_REG(irq_off), 1);
-+
-+ /* Wake up task */
-+ complete(&ctrl->op_completion);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static int bcmnand_wait_interrupt(struct bcmnand_ctrl *ctrl,
-+ unsigned int irq_off,
-+ unsigned int timeout_usec)
-+{
-+ long timeout_jiffies;
-+ int ret = 0;
-+
-+ reinit_completion(&ctrl->op_completion);
-+
-+ /* Acknowledge interrupt */
-+ bcmnand_reg_write(ctrl, NANDC_INT_N_REG(irq_off), 1);
-+
-+ /* Enable IRQ to wait on */
-+ bcmnand_reg_awrite(ctrl, NANDC_IDM_IRQ_N_EN(irq_off), 1);
-+
-+ timeout_jiffies = 1 + usecs_to_jiffies(timeout_usec);
-+
-+ if (irq_off != NANDC_IRQ_CONTROLLER_RDY ||
-+ 0 == bcmnand_reg_aread(ctrl, NANDC_IDM_IO_CTRL_RDY)) {
-+
-+ timeout_jiffies = wait_for_completion_timeout(
-+ &ctrl->op_completion, timeout_jiffies);
-+
-+ if (timeout_jiffies < 0)
-+ ret = timeout_jiffies;
-+ if (timeout_jiffies == 0)
-+ ret = -ETIME;
-+ }
-+
-+ /* Disable IRQ, we're done waiting */
-+ bcmnand_reg_awrite(ctrl, NANDC_IDM_IRQ_N_EN(irq_off), 0);
-+
-+ if (bcmnand_reg_aread(ctrl, NANDC_IDM_IO_CTRL_RDY))
-+ ret = 0;
-+
-+ return ret;
-+}
-+
-+/*
-+ * wait for command completion
-+ */
-+static int bcmnand_wait_cmd(struct bcmnand_ctrl *ctrl, unsigned int timeout_usec)
-+{
-+ unsigned int retries;
-+
-+ if (bcmnand_reg_read(ctrl, NANDC_INT_STAT_CTLR_RDY))
-+ return 0;
-+
-+ /* If the timeout is long, wait for interrupt */
-+ if (timeout_usec >= jiffies_to_usecs(1) >> 4)
-+ return bcmnand_wait_interrupt(
-+ ctrl, NANDC_IRQ_CONTROLLER_RDY, timeout_usec);
-+
-+ /* Wait for completion of the prior command */
-+ retries = (timeout_usec >> 3) + 1;
-+
-+ while (retries-- &&
-+ 0 == bcmnand_reg_read(ctrl, NANDC_INT_STAT_CTLR_RDY)) {
-+ cpu_relax();
-+ udelay(6);
-+ }
-+
-+ if (retries == 0)
-+ return -ETIME;
-+
-+ return 0;
-+}
-+
-+
-+/*
-+ * NAND Interface - waitfunc
-+ */
-+static int bcmnand_waitfunc(struct mtd_info *mtd, struct nand_chip *chip)
-+{
-+ struct bcmnand_ctrl *ctrl = chip->priv;
-+ unsigned int to;
-+ int ret;
-+
-+ /* figure out timeout based on what command is on */
-+ switch (ctrl->last_cmd) {
-+ default:
-+ case NAND_CMD_ERASE1:
-+ case NAND_CMD_ERASE2:
-+ to = 1 << 16;
-+ break;
-+ case NAND_CMD_STATUS:
-+ case NAND_CMD_RESET:
-+ to = 256;
-+ break;
-+ case NAND_CMD_READID:
-+ to = 1024;
-+ break;
-+ case NAND_CMD_READ1:
-+ case NAND_CMD_READ0:
-+ to = 2048;
-+ break;
-+ case NAND_CMD_PAGEPROG:
-+ to = 4096;
-+ break;
-+ case NAND_CMD_READOOB:
-+ to = 512;
-+ break;
-+ }
-+
-+ /* deliver deferred error code if any */
-+ ret = ctrl->cmd_ret;
-+ if (ret < 0)
-+ ctrl->cmd_ret = 0;
-+ else
-+ ret = bcmnand_wait_cmd(ctrl, to);
-+
-+ /* Timeout */
-+ if (ret < 0)
-+ return NAND_STATUS_FAIL;
-+
-+ ret = bcmnand_reg_read(ctrl, NANDC_INT_STAT_FLASH_STATUS);
-+
-+ return ret;
-+}
-+
-+/*
-+ * NAND Interface - read_oob
-+ */
-+static int bcmnand_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
-+ int page)
-+{
-+ struct bcmnand_ctrl *ctrl = chip->priv;
-+ unsigned int n = ctrl->chip_num;
-+ void __iomem *ctrl_spare;
-+ unsigned int spare_per_sec, sector;
-+ u64 nand_addr;
-+
-+ ctrl_spare = ctrl->core->io_addr + NANDC_SPARE_AREA_READ_OFF;
-+
-+ /* Set the page address for the following commands */
-+ nand_addr = ((u64)page << chip->page_shift);
-+ bcmnand_reg_write(ctrl, NANDC_CMD_EXT_ADDR, nand_addr >> 32);
-+
-+ spare_per_sec = mtd->oobsize >> ctrl->sec_per_page_shift;
-+
-+ /* Disable ECC validation for spare area reads */
-+ bcmnand_reg_write(ctrl, NANDC_ACC_CTRL_RD_ECC(n), 0);
-+
-+ /* Loop all sectors in page */
-+ for (sector = 0; sector < (1<<ctrl->sec_per_page_shift); sector++) {
-+ unsigned int col;
-+
-+ col = (sector << ctrl->sector_size_shift);
-+
-+ /* Issue command to read partial page */
-+ bcmnand_reg_write(ctrl, NANDC_CMD_ADDRESS, nand_addr + col);
-+
-+ bcmnand_reg_write(ctrl, NANDC_CMD_START_OPCODE,
-+ NANDC_CMD_OPCODE_SPARE_READ);
-+
-+ /* Wait for the command to complete */
-+ if (bcmnand_wait_cmd(ctrl, (sector == 0) ? 10000 : 100))
-+ return -EIO;
-+
-+ if (!bcmnand_reg_read(ctrl, NANDC_INT_STAT_SPARE_VALID))
-+ return -EIO;
-+
-+ /* Set controller to Little Endian mode for copying */
-+ bcmnand_reg_awrite(ctrl, NANDC_IDM_APB_LITTLE_ENDIAN, 1);
-+
-+ memcpy(chip->oob_poi + sector * spare_per_sec,
-+ ctrl_spare, spare_per_sec);
-+
-+ /* Return to Big Endian mode for commands etc */
-+ bcmnand_reg_awrite(ctrl, NANDC_IDM_APB_LITTLE_ENDIAN, 0);
-+ }
-+
-+ return 0;
-+}
-+
-+/*
-+ * NAND Interface - write_oob
-+ */
-+static int bcmnand_write_oob(struct mtd_info *mtd, struct nand_chip *chip,
-+ int page)
-+{
-+ struct bcmnand_ctrl *ctrl = chip->priv;
-+ unsigned int n = ctrl->chip_num;
-+ void __iomem *ctrl_spare;
-+ unsigned int spare_per_sec, sector, num_sec;
-+ u64 nand_addr;
-+ int to, status = 0;
-+
-+ ctrl_spare = ctrl->core->io_addr + NANDC_SPARE_AREA_WRITE_OFF;
-+
-+ /* Disable ECC generation for spare area writes */
-+ bcmnand_reg_write(ctrl, NANDC_ACC_CTRL_WR_ECC(n), 0);
-+
-+ spare_per_sec = mtd->oobsize >> ctrl->sec_per_page_shift;
-+
-+ /* Set the page address for the following commands */
-+ nand_addr = ((u64)page << chip->page_shift);
-+ bcmnand_reg_write(ctrl, NANDC_CMD_EXT_ADDR, nand_addr >> 32);
-+
-+ /* Must allow partial programming to change spare area only */
-+ bcmnand_reg_write(ctrl, NANDC_ACC_CTRL_PGM_PARTIAL(n), 1);
-+
-+ num_sec = 1 << ctrl->sec_per_page_shift;
-+ /* Loop all sectors in page */
-+ for (sector = 0; sector < num_sec; sector++) {
-+ unsigned int col;
-+
-+ /* Spare area accessed by the data sector offset */
-+ col = (sector << ctrl->sector_size_shift);
-+
-+ bcmnand_reg_write(ctrl, NANDC_CMD_ADDRESS, nand_addr + col);
-+
-+ /* Set controller to Little Endian mode for copying */
-+ bcmnand_reg_awrite(ctrl, NANDC_IDM_APB_LITTLE_ENDIAN, 1);
-+
-+ memcpy(ctrl_spare, chip->oob_poi + sector * spare_per_sec,
-+ spare_per_sec);
-+
-+ /* Return to Big Endian mode for commands etc */
-+ bcmnand_reg_awrite(ctrl, NANDC_IDM_APB_LITTLE_ENDIAN, 0);
-+
-+ /* Push spare bytes into internal buffer, last goes to flash */
-+ bcmnand_reg_write(ctrl, NANDC_CMD_START_OPCODE,
-+ NANDC_CMD_OPCODE_SPARE_PROG);
-+
-+ if (sector == (num_sec - 1))
-+ to = 1 << 16;
-+ else
-+ to = 1 << 10;
-+
-+ if (bcmnand_wait_cmd(ctrl, to))
-+ return -EIO;
-+ }
-+
-+ /* Restore partial programming inhibition */
-+ bcmnand_reg_write(ctrl, NANDC_ACC_CTRL_PGM_PARTIAL(n), 0);
-+
-+ status = bcmnand_waitfunc(mtd, chip);
-+ return status & NAND_STATUS_FAIL ? -EIO : 0;
-+}
-+
-+/*
-+ * verify that a buffer is all erased
-+ */
-+static bool bcmnand_buf_erased(const void *buf, unsigned int len)
-+{
-+ unsigned int i;
-+ const u32 *p = buf;
-+
-+ for (i = 0; i < (len >> 2); i++) {
-+ if (p[i] != 0xffffffff)
-+ return false;
-+ }
-+ return true;
-+}
-+
-+/*
-+ * read a page, with or without ECC checking
-+ */
-+static int bcmnand_read_page_do(struct mtd_info *mtd, struct nand_chip *chip,
-+ uint8_t *buf, int page, bool ecc)
-+{
-+ struct bcmnand_ctrl *ctrl = chip->priv;
-+ unsigned int n = ctrl->chip_num;
-+ void __iomem *ctrl_cache;
-+ void __iomem *ctrl_spare;
-+ unsigned int data_bytes;
-+ unsigned int spare_per_sec;
-+ unsigned int sector, to = 1 << 16;
-+ u32 err_soft_reg, err_hard_reg;
-+ unsigned int hard_err_count = 0;
-+ int ret;
-+ u64 nand_addr;
-+
-+ ctrl_cache = ctrl->core->io_addr + NANDC_CACHE_OFF;
-+ ctrl_spare = ctrl->core->io_addr + NANDC_SPARE_AREA_READ_OFF;
-+
-+ /* Reset ECC error stats */
-+ err_hard_reg = bcmnand_reg_read(ctrl, NANDC_UNCORR_ERR_COUNT);
-+ err_soft_reg = bcmnand_reg_read(ctrl, NANDC_READ_CORR_BIT_COUNT);
-+
-+ spare_per_sec = mtd->oobsize >> ctrl->sec_per_page_shift;
-+
-+ /* Set the page address for the following commands */
-+ nand_addr = ((u64)page << chip->page_shift);
-+ bcmnand_reg_write(ctrl, NANDC_CMD_EXT_ADDR, nand_addr >> 32);
-+
-+ /* Enable ECC validation for ecc page reads */
-+ bcmnand_reg_write(ctrl, NANDC_ACC_CTRL_RD_ECC(n), ecc);
-+
-+ /* Loop all sectors in page */
-+ for (sector = 0; sector < (1 << ctrl->sec_per_page_shift); sector++) {
-+ data_bytes = 0;
-+
-+ /* Copy partial sectors sized by cache reg */
-+ while (data_bytes < (1<<ctrl->sector_size_shift)) {
-+ unsigned int col;
-+
-+ col = data_bytes + (sector << ctrl->sector_size_shift);
-+
-+ bcmnand_reg_write(ctrl, NANDC_CMD_ADDRESS,
-+ nand_addr + col);
-+
-+ /* Issue command to read partial page */
-+ bcmnand_reg_write(ctrl, NANDC_CMD_START_OPCODE,
-+ NANDC_CMD_OPCODE_PAGE_READ);
-+
-+ /* Wait for the command to complete */
-+ ret = bcmnand_wait_cmd(ctrl, to);
-+ if (ret < 0)
-+ return ret;
-+
-+ /* Set controller to Little Endian mode for copying */
-+ bcmnand_reg_awrite(ctrl, NANDC_IDM_APB_LITTLE_ENDIAN, 1);
-+
-+ if (data_bytes == 0) {
-+ memcpy(chip->oob_poi + sector * spare_per_sec,
-+ ctrl_spare, spare_per_sec);
-+ }
-+
-+ memcpy(buf + col, ctrl_cache, NANDC_CACHE_SIZE);
-+ data_bytes += NANDC_CACHE_SIZE;
-+
-+ /* Return to Big Endian mode for commands etc */
-+ bcmnand_reg_awrite(ctrl, NANDC_IDM_APB_LITTLE_ENDIAN, 0);
-+
-+ /* Next iterations should go fast */
-+ to = 1 << 10;
-+
-+ /* capture hard errors for each partial */
-+ if (err_hard_reg != bcmnand_reg_read(ctrl, NANDC_UNCORR_ERR_COUNT)) {
-+ int era = bcmnand_reg_read(ctrl, NANDC_INT_STAT_ERASED);
-+
-+ if (!era &&
-+ !bcmnand_buf_erased(buf + col, NANDC_CACHE_SIZE))
-+ hard_err_count++;
-+
-+ err_hard_reg = bcmnand_reg_read(ctrl,
-+ NANDC_UNCORR_ERR_COUNT);
-+ }
-+ }
-+ }
-+
-+ if (!ecc)
-+ return 0;
-+
-+ /* Report hard ECC errors */
-+ if (hard_err_count)
-+ mtd->ecc_stats.failed++;
-+
-+ /* Get ECC soft error stats */
-+ mtd->ecc_stats.corrected += err_soft_reg -
-+ bcmnand_reg_read(ctrl, NANDC_READ_CORR_BIT_COUNT);
-+
-+ return 0;
-+}
-+
-+/*
-+ * NAND Interface - read_page_ecc
-+ */
-+static int bcmnand_read_page_ecc(struct mtd_info *mtd, struct nand_chip *chip,
-+ uint8_t *buf, int oob_required, int page)
-+{
-+ return bcmnand_read_page_do(mtd, chip, buf, page, true);
-+}
-+
-+/*
-+ * NAND Interface - read_page_raw
-+ */
-+static int bcmnand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
-+ uint8_t *buf, int oob_required, int page)
-+{
-+ return bcmnand_read_page_do(mtd, chip, buf, page, true);
-+}
-+
-+/*
-+ * do page write, with or without ECC generation enabled
-+ */
-+static int bcmnand_write_page_do(struct mtd_info *mtd, struct nand_chip *chip,
-+ const uint8_t *buf, bool ecc)
-+{
-+ struct bcmnand_ctrl *ctrl = chip->priv;
-+ unsigned int n = ctrl->chip_num;
-+ void __iomem *ctrl_cache;
-+ void __iomem *ctrl_spare;
-+ unsigned int spare_per_sec, sector, num_sec;
-+ unsigned int data_bytes, spare_bytes;
-+ int i, to;
-+ uint8_t *tmp_poi;
-+ u32 nand_addr;
-+
-+ ctrl_cache = ctrl->core->io_addr + NANDC_CACHE_OFF;
-+ ctrl_spare = ctrl->core->io_addr + NANDC_SPARE_AREA_WRITE_OFF;
-+
-+ /* Get start-of-page address */
-+ nand_addr = bcmnand_reg_read(ctrl, NANDC_CMD_ADDRESS);
-+
-+ tmp_poi = kmalloc(mtd->oobsize, GFP_KERNEL);
-+ if (!tmp_poi)
-+ return -ENOMEM;
-+
-+ /* Retreive pre-existing OOB values */
-+ memcpy(tmp_poi, chip->oob_poi, mtd->oobsize);
-+ ctrl->cmd_ret = bcmnand_read_oob(mtd, chip,
-+ nand_addr >> chip->page_shift);
-+ if (ctrl->cmd_ret < 0) {
-+ kfree(tmp_poi);
-+ return ctrl->cmd_ret;
-+ }
-+
-+ /* Apply new OOB data bytes just like they would end up on the chip */
-+ for (i = 0; i < mtd->oobsize; i++)
-+ chip->oob_poi[i] &= tmp_poi[i];
-+ kfree(tmp_poi);
-+
-+ spare_per_sec = mtd->oobsize >> ctrl->sec_per_page_shift;
-+
-+ /* Enable ECC generation for ecc page write, if requested */
-+ bcmnand_reg_write(ctrl, NANDC_ACC_CTRL_WR_ECC(n), ecc);
-+
-+ spare_bytes = 0;
-+ num_sec = 1 << ctrl->sec_per_page_shift;
-+
-+ /* Loop all sectors in page */
-+ for (sector = 0; sector < num_sec; sector++) {
-+ data_bytes = 0;
-+
-+ /* Copy partial sectors sized by cache reg */
-+ while (data_bytes < (1<<ctrl->sector_size_shift)) {
-+ unsigned int col;
-+
-+ col = data_bytes +
-+ (sector << ctrl->sector_size_shift);
-+
-+ /* Set address of 512-byte sub-page */
-+ bcmnand_reg_write(ctrl, NANDC_CMD_ADDRESS,
-+ nand_addr + col);
-+
-+ /* Set controller to Little Endian mode for copying */
-+ bcmnand_reg_awrite(ctrl, NANDC_IDM_APB_LITTLE_ENDIAN,
-+ 1);
-+
-+ /* Set spare area is written at each sector start */
-+ if (data_bytes == 0) {
-+ memcpy(ctrl_spare,
-+ chip->oob_poi + spare_bytes,
-+ spare_per_sec);
-+ spare_bytes += spare_per_sec;
-+ }
-+
-+ /* Copy sub-page data */
-+ memcpy(ctrl_cache, buf + col, NANDC_CACHE_SIZE);
-+ data_bytes += NANDC_CACHE_SIZE;
-+
-+ /* Return to Big Endian mode for commands etc */
-+ bcmnand_reg_awrite(ctrl, NANDC_IDM_APB_LITTLE_ENDIAN, 0);
-+
-+ /* Push data into internal cache */
-+ bcmnand_reg_write(ctrl, NANDC_CMD_START_OPCODE,
-+ NANDC_CMD_OPCODE_PAGE_PROG);
-+
-+ /* Wait for the command to complete */
-+ if (sector == (num_sec - 1))
-+ to = 1 << 16;
-+ else
-+ to = 1 << 10;
-+ ctrl->cmd_ret = bcmnand_wait_cmd(ctrl, to);
-+ if (ctrl->cmd_ret < 0)
-+ return ctrl->cmd_ret;
-+ }
-+ }
-+ return 0;
-+}
-+
-+/*
-+ * NAND Interface = write_page_ecc
-+ */
-+static int bcmnand_write_page_ecc(struct mtd_info *mtd, struct nand_chip *chip,
-+ const uint8_t *buf, int oob_required)
-+{
-+ return bcmnand_write_page_do(mtd, chip, buf, true);
-+}
-+
-+/*
-+ * NAND Interface = write_page_raw
-+ */
-+static int bcmnand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
-+ const uint8_t *buf, int oob_required)
-+{
-+ return bcmnand_write_page_do(mtd, chip, buf, false);
-+}
-+
-+/*
-+ * MTD Interface - read_byte
-+ *
-+ * This function emulates simple controllers behavior
-+ * for just a few relevant commands
-+ */
-+static uint8_t bcmnand_read_byte(struct mtd_info *mtd)
-+{
-+ struct nand_chip *nand = mtd->priv;
-+ struct bcmnand_ctrl *ctrl = nand->priv;
-+ struct device *dev = &ctrl->core->dev;
-+ uint8_t b = ~0;
-+
-+ switch (ctrl->last_cmd) {
-+ case NAND_CMD_READID:
-+ if (ctrl->id_byte_index < 8) {
-+ b = bcmnand_reg_read(ctrl, NANDC_DEVID_BYTE(
-+ ctrl->id_byte_index));
-+ ctrl->id_byte_index++;
-+ }
-+ break;
-+ case NAND_CMD_READOOB:
-+ if (ctrl->oob_index < mtd->oobsize)
-+ b = nand->oob_poi[ctrl->oob_index++];
-+ break;
-+ case NAND_CMD_STATUS:
-+ b = bcmnand_reg_read(ctrl, NANDC_INT_STAT_FLASH_STATUS);
-+ break;
-+ default:
-+ dev_err(dev, "got unkown command: 0x%x in read_byte\n",
-+ ctrl->last_cmd);
-+ }
-+ return b;
-+}
-+
-+/*
-+ * MTD Interface - read_word
-+ *
-+ * Can not be tested without x16 chip, but the SoC does not support x16 i/f.
-+ */
-+static u16 bcmnand_read_word(struct mtd_info *mtd)
-+{
-+ u16 w = ~0;
-+
-+ w = bcmnand_read_byte(mtd);
-+ barrier();
-+ w |= bcmnand_read_byte(mtd) << 8;
-+
-+ return w;
-+}
-+
-+/*
-+ * MTD Interface - select a chip from an array
-+ */
-+static void bcmnand_select_chip(struct mtd_info *mtd, int chip)
-+{
-+ struct nand_chip *nand = mtd->priv;
-+ struct bcmnand_ctrl *ctrl = nand->priv;
-+
-+ ctrl->chip_num = chip;
-+ bcmnand_reg_write(ctrl, NANDC_CMD_CS_SEL, chip);
-+}
-+
-+/*
-+ * NAND Interface - emulate low-level NAND commands
-+ *
-+ * Only a few low-level commands are really needed by generic NAND,
-+ * and they do not call for CMD_LL operations the controller can support.
-+ */
-+static void bcmnand_cmdfunc(struct mtd_info *mtd, unsigned int command,
-+ int column, int page_addr)
-+{
-+ struct nand_chip *nand = mtd->priv;
-+ struct bcmnand_ctrl *ctrl = nand->priv;
-+ struct device *dev = &ctrl->core->dev;
-+ u64 nand_addr;
-+ unsigned int to = 1;
-+
-+ ctrl->last_cmd = command;
-+
-+ /* Set address for some commands */
-+ switch (command) {
-+ case NAND_CMD_ERASE1:
-+ column = 0;
-+ /*FALLTHROUGH*/
-+ case NAND_CMD_SEQIN:
-+ case NAND_CMD_READ0:
-+ case NAND_CMD_READ1:
-+ WARN_ON(column >= mtd->writesize);
-+ nand_addr = (u64) column |
-+ ((u64)page_addr << nand->page_shift);
-+ bcmnand_reg_write(ctrl, NANDC_CMD_EXT_ADDR, nand_addr >> 32);
-+ bcmnand_reg_write(ctrl, NANDC_CMD_ADDRESS, nand_addr);
-+ break;
-+ case NAND_CMD_ERASE2:
-+ case NAND_CMD_RESET:
-+ case NAND_CMD_READID:
-+ case NAND_CMD_READOOB:
-+ case NAND_CMD_PAGEPROG:
-+ default:
-+ /* Do nothing, address not used */
-+ break;
-+ }
-+
-+ /* Issue appropriate command to controller */
-+ switch (command) {
-+ case NAND_CMD_SEQIN:
-+ /* Only need to load command address, done */
-+ return;
-+
-+ case NAND_CMD_RESET:
-+ bcmnand_reg_write(ctrl, NANDC_CMD_START_OPCODE,
-+ NANDC_CMD_OPCODE_FLASH_RESET);
-+ to = 1 << 8;
-+ break;
-+
-+ case NAND_CMD_READID:
-+ bcmnand_reg_write(ctrl, NANDC_CMD_START_OPCODE,
-+ NANDC_CMD_OPCODE_DEVID_READ);
-+ ctrl->id_byte_index = 0;
-+ to = 1 << 8;
-+ break;
-+
-+ case NAND_CMD_READ0:
-+ case NAND_CMD_READ1:
-+ bcmnand_reg_write(ctrl, NANDC_CMD_START_OPCODE,
-+ NANDC_CMD_OPCODE_PAGE_READ);
-+ to = 1 << 15;
-+ break;
-+ case NAND_CMD_STATUS:
-+ bcmnand_reg_write(ctrl, NANDC_CMD_START_OPCODE,
-+ NANDC_CMD_OPCODE_STATUS_READ);
-+ to = 1 << 8;
-+ break;
-+ case NAND_CMD_ERASE1:
-+ return;
-+
-+ case NAND_CMD_ERASE2:
-+ bcmnand_reg_write(ctrl, NANDC_CMD_START_OPCODE,
-+ NANDC_CMD_OPCODE_BLOCK_ERASE);
-+ to = 1 << 18;
-+ break;
-+
-+ case NAND_CMD_PAGEPROG:
-+ /* Cmd already set from write_page */
-+ return;
-+
-+ case NAND_CMD_READOOB:
-+ /* Emulate simple interface */
-+ bcmnand_read_oob(mtd, nand, page_addr);
-+ ctrl->oob_index = 0;
-+ return;
-+
-+ default:
-+ dev_err(dev, "got unkown command: 0x%x in cmdfunc\n",
-+ ctrl->last_cmd);
-+ }
-+
-+ /* Wait for command to complete */
-+ ctrl->cmd_ret = bcmnand_wait_cmd(ctrl, to);
-+
-+}
-+
-+static int bcmnand_scan(struct mtd_info *mtd)
-+{
-+ struct nand_chip *nand = mtd->priv;
-+ struct bcmnand_ctrl *ctrl = nand->priv;
-+ struct device *dev = &ctrl->core->dev;
-+ bool sector_1k = false;
-+ unsigned int chip_num = 0;
-+ int ecc_level = 0;
-+ int ret;
-+
-+ ret = nand_scan_ident(mtd, NANDC_MAX_CHIPS, NULL);
-+ if (ret)
-+ return ret;
-+
-+ /* Get configuration from first chip */
-+ sector_1k = bcmnand_reg_read(ctrl, NANDC_ACC_CTRL_SECTOR_1K(0));
-+ ecc_level = bcmnand_reg_read(ctrl, NANDC_ACC_CTRL_ECC_LEVEL(0));
-+ mtd->writesize_shift = nand->page_shift;
-+
-+ ctrl->ecc_level = ecc_level;
-+ ctrl->sector_size_shift = sector_1k ? 10 : 9;
-+
-+ /* Configure spare area, tweak as needed */
-+ do {
-+ ctrl->sec_per_page_shift =
-+ mtd->writesize_shift - ctrl->sector_size_shift;
-+
-+ /* will return -EINVAL if OOB space exhausted */
-+ ret = bcmnand_hw_ecc_layout(ctrl);
-+
-+ /* First try to bump sector size to 1k, then decrease level */
-+ if (ret && nand->page_shift > 9 && ctrl->sector_size_shift < 10)
-+ ctrl->sector_size_shift = 10;
-+ else if (ret)
-+ ctrl->ecc_level--;
-+
-+ } while (ret && ctrl->ecc_level > 0);
-+
-+ if (WARN_ON(ctrl->ecc_level == 0))
-+ return -ENOENT;
-+
-+ if ((ctrl->sector_size_shift > 9) != (sector_1k == 1)) {
-+ dev_info(dev, "sector size adjusted to 1k\n");
-+ sector_1k = 1;
-+ }
-+
-+ if (ecc_level != ctrl->ecc_level) {
-+ dev_info(dev, "ECC level adjusted from %u to %u\n",
-+ ecc_level, ctrl->ecc_level);
-+ ecc_level = ctrl->ecc_level;
-+ }
-+
-+ /* handle the hardware chip config registers */
-+ for (chip_num = 0; chip_num < nand->numchips; chip_num++) {
-+ bcmnand_reg_write(ctrl, NANDC_ACC_CTRL_SECTOR_1K(chip_num),
-+ sector_1k);
-+ bcmnand_reg_write(ctrl, NANDC_ACC_CTRL_ECC_LEVEL(chip_num),
-+ ecc_level);
-+
-+ /* Large pages: no partial page programming */
-+ if (mtd->writesize > 512) {
-+ bcmnand_reg_write(ctrl,
-+ NANDC_ACC_CTRL_PGM_RDIN(chip_num), 0);
-+ bcmnand_reg_write(ctrl,
-+ NANDC_ACC_CTRL_PGM_PARTIAL(chip_num), 0);
-+ }
-+
-+ /* Do not raise ECC error when reading erased pages */
-+ /* This bit has only partial effect, driver needs to help */
-+ bcmnand_reg_write(ctrl, NANDC_ACC_CTRL_ERA_ECC_ERR(chip_num),
-+ 0);
-+
-+ bcmnand_reg_write(ctrl, NANDC_ACC_CTRL_PG_HIT(chip_num), 0);
-+ bcmnand_reg_write(ctrl, NANDC_ACC_CTRL_PREFETCH(chip_num), 0);
-+ bcmnand_reg_write(ctrl, NANDC_ACC_CTRL_CACHE_MODE(chip_num), 0);
-+ bcmnand_reg_write(ctrl, NANDC_ACC_CTRL_CACHE_LASTPG(chip_num),
-+ 0);
-+
-+ /* TBD: consolidate or at least verify the s/w and h/w geometries agree */
-+ }
-+
-+ /* Allow writing on device */
-+ if (!(nand->options & NAND_ROM))
-+ bcmnand_reg_write(ctrl, NANDC_CS_NAND_WP, 0);
-+
-+ dev_dbg(dev, "layout.oobavail=%d\n", nand->ecc.layout->oobavail);
-+
-+ ret = nand_scan_tail(mtd);
-+
-+ if (nand->badblockbits == 0)
-+ nand->badblockbits = 8;
-+ if (WARN_ON((1 << nand->page_shift) != mtd->writesize))
-+ return -EIO;
-+
-+ /* Spit out some key chip parameters as detected by nand_base */
-+ dev_dbg(dev, "erasesize=%d writesize=%d oobsize=%d page_shift=%d badblockpos=%d badblockbits=%d\n",
-+ mtd->erasesize, mtd->writesize, mtd->oobsize,
-+ nand->page_shift, nand->badblockpos, nand->badblockbits);
-+
-+ return ret;
-+}
-+
-+/*
-+ * main intiailization function
-+ */
-+static int bcmnand_ctrl_init(struct bcmnand_ctrl *ctrl)
-+{
-+ unsigned int chip;
-+ struct nand_chip *nand;
-+ struct mtd_info *mtd;
-+ struct device *dev = &ctrl->core->dev;
-+ int ret;
-+
-+ /* Software variables init */
-+ nand = &ctrl->nand;
-+ mtd = &ctrl->mtd;
-+
-+ init_completion(&ctrl->op_completion);
-+
-+ mtd->priv = nand;
-+ mtd->owner = THIS_MODULE;
-+ mtd->name = KBUILD_MODNAME;
-+
-+ nand->priv = ctrl;
-+
-+ nand->chip_delay = 5; /* not used */
-+ nand->IO_ADDR_R = nand->IO_ADDR_W = (void *)~0L;
-+
-+ if (bcmnand_reg_read(ctrl, NANDC_CONFIG_CHIP_WIDTH(0)))
-+ nand->options |= NAND_BUSWIDTH_16;
-+ nand->options |= NAND_SKIP_BBTSCAN; /* Dont need BBTs */
-+
-+ nand->options |= NAND_NO_SUBPAGE_WRITE; /* Subpages unsupported */
-+
-+ nand->dev_ready = bcmnand_dev_ready;
-+ nand->read_byte = bcmnand_read_byte;
-+ nand->read_word = bcmnand_read_word;
-+ nand->select_chip = bcmnand_select_chip;
-+ nand->cmdfunc = bcmnand_cmdfunc;
-+ nand->waitfunc = bcmnand_waitfunc;
-+
-+ nand->ecc.mode = NAND_ECC_HW;
-+ nand->ecc.read_page_raw = bcmnand_read_page_raw;
-+ nand->ecc.write_page_raw = bcmnand_write_page_raw;
-+ nand->ecc.read_page = bcmnand_read_page_ecc;
-+ nand->ecc.write_page = bcmnand_write_page_ecc;
-+ nand->ecc.read_oob = bcmnand_read_oob;
-+ nand->ecc.write_oob = bcmnand_write_oob;
-+
-+ /* Set AUTO_CNFIG bit - try to auto-detect chips */
-+ bcmnand_reg_write(ctrl, NANDC_CS_AUTO_CONFIG, 1);
-+
-+ usleep_range(1000, 1500);
-+
-+ /* Print out current chip config */
-+ for (chip = 0; chip < NANDC_MAX_CHIPS; chip++) {
-+ dev_dbg(dev, "chip[%d]: size=%#x block=%#x page=%#x ecc_level=%#x\n",
-+ chip,
-+ bcmnand_reg_read(ctrl, NANDC_CONFIG_CHIP_SIZE(chip)),
-+ bcmnand_reg_read(ctrl, NANDC_CONFIG_BLK_SIZE(chip)),
-+ bcmnand_reg_read(ctrl, NANDC_CONFIG_PAGE_SIZE(chip)),
-+ bcmnand_reg_read(ctrl, NANDC_ACC_CTRL_ECC_LEVEL(chip)));
-+ }
-+
-+ dev_dbg(dev, "Nand controller is reads=%d\n",
-+ bcmnand_reg_aread(ctrl, NANDC_IDM_IO_CTRL_RDY));
-+
-+ ret = bcmnand_scan(mtd);
-+ if (ret) {
-+ dev_err(dev, "scanning the nand flash chip failed with %i\n",
-+ ret);
-+ return ret;
-+ }
-+
-+ return 0;
-+}
-+
-+static int bcmnand_idm_init(struct bcmnand_ctrl *ctrl)
-+{
-+ int irq_off;
-+ unsigned int retries = 0x1000;
-+ struct device *dev = &ctrl->core->dev;
-+
-+ if (bcmnand_reg_aread(ctrl, NANDC_IDM_RESET))
-+ dev_info(dev, "stuck in reset\n");
-+
-+ bcmnand_reg_awrite(ctrl, NANDC_IDM_RESET, 1);
-+ if (!bcmnand_reg_aread(ctrl, NANDC_IDM_RESET)) {
-+ dev_err(dev, "reset of failed\n");
-+ return -EIO;
-+ }
-+
-+ while (bcmnand_reg_aread(ctrl, NANDC_IDM_RESET)) {
-+ bcmnand_reg_awrite(ctrl, NANDC_IDM_RESET, 0);
-+ cpu_relax();
-+ usleep_range(100, 150);
-+ if (!(retries--)) {
-+ dev_err(dev, "did not came back from reset\n");
-+ return -ETIMEDOUT;
-+ }
-+ }
-+
-+ bcmnand_reg_awrite(ctrl, NANDC_IDM_CLOCK_EN, 1);
-+ bcmnand_reg_awrite(ctrl, NANDC_IDM_APB_LITTLE_ENDIAN, 0);
-+ udelay(10);
-+
-+ dev_info(dev, "NAND Controller rev %d.%02d\n",
-+ bcmnand_reg_read(ctrl, NANDC_REV_MAJOR),
-+ bcmnand_reg_read(ctrl, NANDC_REV_MINOR));
-+
-+ usleep_range(250, 350);
-+
-+ /* Disable all IRQs */
-+ for (irq_off = 0; irq_off < NANDC_IRQ_NUM; irq_off++)
-+ bcmnand_reg_awrite(ctrl, NANDC_IDM_IRQ_N_EN(irq_off), 0);
-+
-+ return 0;
-+}
-+
-+static const char * const part_probes[] = { "ofpart", "bcm47xxpart", NULL };
-+
-+/*
-+ * Top-level init function
-+ */
-+static int bcmnand_probe(struct bcma_device *core)
-+{
-+ struct mtd_part_parser_data parser_data;
-+ struct device *dev = &core->dev;
-+ struct bcmnand_ctrl *ctrl;
-+ int res, i, irq;
-+
-+ ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL);
-+ if (!ctrl)
-+ return -ENOMEM;
-+
-+ bcma_set_drvdata(core, ctrl);
-+
-+ ctrl->mtd.dev.parent = &core->dev;
-+ ctrl->core = core;
-+
-+ /* Acquire all interrupt lines */
-+ for (i = 0; i < NANDC_IRQ_NUM; i++) {
-+ irq = bcma_core_irq(core, i);
-+ if (!irq) {
-+ dev_err(dev, "IRQ idx %i not available\n", i);
-+ return -ENOENT;
-+ }
-+ res = devm_request_irq(dev, irq, bcmnand_isr, 0,
-+ KBUILD_MODNAME, ctrl);
-+ if (res < 0) {
-+ dev_err(dev, "problem requesting irq: %i (idx: %i)\n",
-+ irq, i);
-+ return res;
-+ }
-+ }
-+
-+ res = bcmnand_idm_init(ctrl);
-+ if (res)
-+ return res;
-+
-+ res = bcmnand_ctrl_init(ctrl);
-+ if (res)
-+ return res;
-+
-+ parser_data.of_node = dev->of_node;
-+ res = mtd_device_parse_register(&ctrl->mtd, part_probes, &parser_data, NULL, 0);
-+ if (res) {
-+ dev_err(dev, "Failed to register MTD device: %d\n", res);
-+ return res;
-+ }
-+ return 0;
-+}
-+
-+static void bcmnand_remove(struct bcma_device *core)
-+{
-+ struct bcmnand_ctrl *ctrl = bcma_get_drvdata(core);
-+
-+ mtd_device_unregister(&ctrl->mtd);
-+}
-+
-+static const struct bcma_device_id bcmnand_bcma_tbl[] = {
-+ BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_NS_NAND, BCMA_ANY_REV, BCMA_ANY_CLASS),
-+ BCMA_CORETABLE_END
-+};
-+MODULE_DEVICE_TABLE(bcma, bgmac_bcma_tbl);
-+
-+static struct bcma_driver bcmnand_bcma_driver = {
-+ .name = KBUILD_MODNAME,
-+ .id_table = bcmnand_bcma_tbl,
-+ .probe = bcmnand_probe,
-+ .remove = bcmnand_remove,
-+};
-+
-+static int __init bcmnand_init(void)
-+{
-+ return bcma_driver_register(&bcmnand_bcma_driver);
-+}
-+
-+static void __exit bcmnand_exit(void)
-+{
-+ bcma_driver_unregister(&bcmnand_bcma_driver);
-+}
-+
-+module_init(bcmnand_init)
-+module_exit(bcmnand_exit)
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Hauke Mehrtens");
-+MODULE_DESCRIPTION("Northstar on-chip NAND Flash Controller driver");
diff --git a/target/linux/bcm53xx/patches-3.18/500-UBI-Detect-EOF-mark-and-erase-all-remaining-blocks.patch b/target/linux/bcm53xx/patches-3.18/500-UBI-Detect-EOF-mark-and-erase-all-remaining-blocks.patch
deleted file mode 100644
index 08d4790e2f..0000000000
--- a/target/linux/bcm53xx/patches-3.18/500-UBI-Detect-EOF-mark-and-erase-all-remaining-blocks.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From 2a2af518266a29323cf30c3f9ba9ef2ceb1dd84b Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Thu, 16 Oct 2014 20:52:16 +0200
-Subject: [PATCH] UBI: Detect EOF mark and erase all remaining blocks
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- drivers/mtd/ubi/attach.c | 5 +++++
- drivers/mtd/ubi/io.c | 4 ++++
- drivers/mtd/ubi/ubi.h | 1 +
- 3 files changed, 10 insertions(+)
-
---- a/drivers/mtd/ubi/attach.c
-+++ b/drivers/mtd/ubi/attach.c
-@@ -95,6 +95,9 @@ static int self_check_ai(struct ubi_devi
- static struct ubi_ec_hdr *ech;
- static struct ubi_vid_hdr *vidh;
-
-+/* Set on finding block with 0xdeadc0de, indicates erasing all blocks behind */
-+bool erase_all_next;
-+
- /**
- * add_to_list - add physical eraseblock to a list.
- * @ai: attaching information
-@@ -1418,6 +1421,8 @@ int ubi_attach(struct ubi_device *ubi, i
- if (!ai)
- return -ENOMEM;
-
-+ erase_all_next = false;
-+
- #ifdef CONFIG_MTD_UBI_FASTMAP
- /* On small flash devices we disable fastmap in any case. */
- if ((int)mtd_div_by_eb(ubi->mtd->size, ubi->mtd) <= UBI_FM_MAX_START) {
---- a/drivers/mtd/ubi/io.c
-+++ b/drivers/mtd/ubi/io.c
-@@ -753,6 +753,10 @@ int ubi_io_read_ec_hdr(struct ubi_device
- }
-
- magic = be32_to_cpu(ec_hdr->magic);
-+ if (magic == 0xdeadc0de)
-+ erase_all_next = true;
-+ if (erase_all_next)
-+ return read_err ? UBI_IO_FF_BITFLIPS : UBI_IO_FF;
- if (magic != UBI_EC_HDR_MAGIC) {
- if (mtd_is_eccerr(read_err))
- return UBI_IO_BAD_HDR_EBADMSG;
---- a/drivers/mtd/ubi/ubi.h
-+++ b/drivers/mtd/ubi/ubi.h
-@@ -743,6 +743,7 @@ extern struct mutex ubi_devices_mutex;
- extern struct blocking_notifier_head ubi_notifiers;
-
- /* attach.c */
-+extern bool erase_all_next;
- int ubi_add_to_av(struct ubi_device *ubi, struct ubi_attach_info *ai, int pnum,
- int ec, const struct ubi_vid_hdr *vid_hdr, int bitflips);
- struct ubi_ainf_volume *ubi_find_av(const struct ubi_attach_info *ai,
diff --git a/target/linux/bcm53xx/patches-3.18/700-bgmac-add-support-for-the-3rd-bus-core-device.patch b/target/linux/bcm53xx/patches-3.18/700-bgmac-add-support-for-the-3rd-bus-core-device.patch
deleted file mode 100644
index 6be75bb806..0000000000
--- a/target/linux/bcm53xx/patches-3.18/700-bgmac-add-support-for-the-3rd-bus-core-device.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-From f5d5afc0b1402aae0f6a2350e43241603dbaff1e Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Wed, 13 May 2015 10:46:47 +0200
-Subject: [PATCH] bgmac: add support for the 3rd bus core (device)
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-So far we were supporting up to 2 cores but recent devices (e.g. Netgear
-R8000) may use 3rd as well. Lower ones (1st, 2nd) are usually used for
-some offloading then.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- drivers/net/ethernet/broadcom/bgmac.c | 28 +++++++++++++++++++++++-----
- 1 file changed, 23 insertions(+), 5 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bgmac.c
-+++ b/drivers/net/ethernet/broadcom/bgmac.c
-@@ -1561,11 +1561,20 @@ static int bgmac_probe(struct bcma_devic
- struct net_device *net_dev;
- struct bgmac *bgmac;
- struct ssb_sprom *sprom = &core->bus->sprom;
-- u8 *mac = core->core_unit ? sprom->et1mac : sprom->et0mac;
-+ u8 *mac;
- int err;
-
-- /* We don't support 2nd, 3rd, ... units, SPROM has to be adjusted */
-- if (core->core_unit > 1) {
-+ switch (core->core_unit) {
-+ case 0:
-+ mac = sprom->et0mac;
-+ break;
-+ case 1:
-+ mac = sprom->et1mac;
-+ break;
-+ case 2:
-+ mac = sprom->et2mac;
-+ break;
-+ default:
- pr_err("Unsupported core_unit %d\n", core->core_unit);
- return -ENOTSUPP;
- }
-@@ -1600,8 +1609,17 @@ static int bgmac_probe(struct bcma_devic
- }
- bgmac->cmn = core->bus->drv_gmac_cmn.core;
-
-- bgmac->phyaddr = core->core_unit ? sprom->et1phyaddr :
-- sprom->et0phyaddr;
-+ switch (core->core_unit) {
-+ case 0:
-+ bgmac->phyaddr = sprom->et0phyaddr;
-+ break;
-+ case 1:
-+ bgmac->phyaddr = sprom->et1phyaddr;
-+ break;
-+ case 2:
-+ bgmac->phyaddr = sprom->et2phyaddr;
-+ break;
-+ }
- bgmac->phyaddr &= BGMAC_PHY_MASK;
- if (bgmac->phyaddr == BGMAC_PHY_MASK) {
- bgmac_err(bgmac, "No PHY found\n");
diff --git a/target/linux/bcm53xx/patches-3.18/710-b53-add-hacky-CPU-port-fixes-for-devices-not-using-p.patch b/target/linux/bcm53xx/patches-3.18/710-b53-add-hacky-CPU-port-fixes-for-devices-not-using-p.patch
deleted file mode 100644
index 6015c4aaca..0000000000
--- a/target/linux/bcm53xx/patches-3.18/710-b53-add-hacky-CPU-port-fixes-for-devices-not-using-p.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From 4abdde3ad6bc0b3b157c4bf6ec0bf139d11d07e8 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Wed, 13 May 2015 14:13:28 +0200
-Subject: [PATCH] b53: add hacky CPU port fixes for devices not using port 5
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- drivers/net/phy/b53/b53_common.c | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/drivers/net/phy/b53/b53_common.c
-+++ b/drivers/net/phy/b53/b53_common.c
-@@ -25,6 +25,7 @@
- #include <linux/module.h>
- #include <linux/switch.h>
- #include <linux/platform_data/b53.h>
-+#include <linux/of.h>
-
- #include "b53_regs.h"
- #include "b53_priv.h"
-@@ -1313,6 +1314,11 @@ static int b53_switch_init(struct b53_de
- sw_dev->cpu_port = 5;
- }
-
-+ if (of_machine_is_compatible("asus,rt-ac87u"))
-+ sw_dev->cpu_port = 7;
-+ else if (of_machine_is_compatible("netgear,r8000"))
-+ sw_dev->cpu_port = 8;
-+
- /* cpu port is always last */
- sw_dev->ports = sw_dev->cpu_port + 1;
- dev->enabled_ports |= BIT(sw_dev->cpu_port);
diff --git a/target/linux/bcm53xx/patches-3.18/800-bcma-use-two-different-initcalls-if-built-in.patch b/target/linux/bcm53xx/patches-3.18/800-bcma-use-two-different-initcalls-if-built-in.patch
deleted file mode 100644
index 9f2cd396ae..0000000000
--- a/target/linux/bcm53xx/patches-3.18/800-bcma-use-two-different-initcalls-if-built-in.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-From 666bdfc027cde41a171862dc698987a378c8b66a Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Mon, 9 Feb 2015 18:00:42 +0100
-Subject: [PATCH RFC] bcma: use two different initcalls if built-in
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This is needed as we can't initialize bus during fs_initcall.
-Initialization requires SPROM which depends on NVRAM which depends on
-mtd. Since mtd, spi, nand, spi-nor use standard module_init, we have to
-do the same in bcma.
-Without this we'll try to initialize SPROM without having a ready SPROM
-proviver registered using bcma_arch_register_fallback_sprom.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
-While this patch seems to work and I can compile bcma as built-in and
-module, I'm not too proud of it. I don't really like these #if(n)def
-tricks and I'm afraid bcma_modinit may be called even if
-bcma_modinit_early failed.
-
-Do you see any better idea of solving this?
----
- drivers/bcma/main.c | 16 ++++++++++++++--
- 1 file changed, 14 insertions(+), 2 deletions(-)
-
---- a/drivers/bcma/main.c
-+++ b/drivers/bcma/main.c
-@@ -637,13 +637,25 @@ static int bcma_device_uevent(struct dev
- core->id.rev, core->id.class);
- }
-
-+/* Bus has to be registered early, before any bcma driver */
-+static int __init bcma_modinit_early(void)
-+{
-+ return bus_register(&bcma_bus_type);
-+}
-+#ifndef MODULE
-+fs_initcall(bcma_modinit_early);
-+#endif
-+
-+/* Initialization has to be done later with SPI/mtd/NAND/SPROM available */
- static int __init bcma_modinit(void)
- {
- int err;
-
-- err = bus_register(&bcma_bus_type);
-+#ifdef MODULE
-+ err = bcma_modinit_early();
- if (err)
- return err;
-+#endif
-
- err = bcma_host_soc_register_driver();
- if (err) {
-@@ -660,7 +672,7 @@ static int __init bcma_modinit(void)
-
- return err;
- }
--fs_initcall(bcma_modinit);
-+module_init(bcma_modinit);
-
- static void __exit bcma_modexit(void)
- {
diff --git a/target/linux/bcm53xx/patches-3.18/810-USB-bcma-make-helper-creating-platform-dev-more-gene.patch b/target/linux/bcm53xx/patches-3.18/810-USB-bcma-make-helper-creating-platform-dev-more-gene.patch
deleted file mode 100644
index d331ae6573..0000000000
--- a/target/linux/bcm53xx/patches-3.18/810-USB-bcma-make-helper-creating-platform-dev-more-gene.patch
+++ /dev/null
@@ -1,73 +0,0 @@
-From 5b4fed9fc917cc2bfc5297eeab03aeba5d340618 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Tue, 16 Jun 2015 12:33:46 +0200
-Subject: [PATCH] USB: bcma: make helper creating platform dev more generic
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Having "bool ohci" argument bounded us to two cases only and didn't
-allow re-using this code for XHCI.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- drivers/usb/host/bcma-hcd.c | 24 +++++++++++++-----------
- 1 file changed, 13 insertions(+), 11 deletions(-)
-
---- a/drivers/usb/host/bcma-hcd.c
-+++ b/drivers/usb/host/bcma-hcd.c
-@@ -249,7 +249,10 @@ static const struct usb_ehci_pdata ehci_
- static const struct usb_ohci_pdata ohci_pdata = {
- };
-
--static struct platform_device *bcma_hcd_create_pdev(struct bcma_device *dev, bool ohci, u32 addr)
-+static struct platform_device *bcma_hcd_create_pdev(struct bcma_device *dev,
-+ const char *name, u32 addr,
-+ const void *data,
-+ size_t size)
- {
- struct platform_device *hci_dev;
- struct resource hci_res[2];
-@@ -264,8 +267,7 @@ static struct platform_device *bcma_hcd_
- hci_res[1].start = dev->irq;
- hci_res[1].flags = IORESOURCE_IRQ;
-
-- hci_dev = platform_device_alloc(ohci ? "ohci-platform" :
-- "ehci-platform" , 0);
-+ hci_dev = platform_device_alloc(name, 0);
- if (!hci_dev)
- return ERR_PTR(-ENOMEM);
-
-@@ -276,12 +278,8 @@ static struct platform_device *bcma_hcd_
- ARRAY_SIZE(hci_res));
- if (ret)
- goto err_alloc;
-- if (ohci)
-- ret = platform_device_add_data(hci_dev, &ohci_pdata,
-- sizeof(ohci_pdata));
-- else
-- ret = platform_device_add_data(hci_dev, &ehci_pdata,
-- sizeof(ehci_pdata));
-+ if (data)
-+ ret = platform_device_add_data(hci_dev, data, size);
- if (ret)
- goto err_alloc;
- ret = platform_device_add(hci_dev);
-@@ -334,11 +332,15 @@ static int bcma_hcd_probe(struct bcma_de
- && chipinfo->rev == 0)
- ohci_addr = 0x18009000;
-
-- usb_dev->ohci_dev = bcma_hcd_create_pdev(dev, true, ohci_addr);
-+ usb_dev->ohci_dev = bcma_hcd_create_pdev(dev, "ohci-platform",
-+ ohci_addr, &ohci_pdata,
-+ sizeof(ohci_pdata));
- if (IS_ERR(usb_dev->ohci_dev))
- return PTR_ERR(usb_dev->ohci_dev);
-
-- usb_dev->ehci_dev = bcma_hcd_create_pdev(dev, false, dev->addr);
-+ usb_dev->ehci_dev = bcma_hcd_create_pdev(dev, "ehci-platform",
-+ dev->addr, &ehci_pdata,
-+ sizeof(ehci_pdata));
- if (IS_ERR(usb_dev->ehci_dev)) {
- err = PTR_ERR(usb_dev->ehci_dev);
- goto err_unregister_ohci_dev;
diff --git a/target/linux/bcm53xx/patches-3.18/811-USB-bcma-use-separated-function-for-USB-2.0-initiali.patch b/target/linux/bcm53xx/patches-3.18/811-USB-bcma-use-separated-function-for-USB-2.0-initiali.patch
deleted file mode 100644
index 758b0ac1eb..0000000000
--- a/target/linux/bcm53xx/patches-3.18/811-USB-bcma-use-separated-function-for-USB-2.0-initiali.patch
+++ /dev/null
@@ -1,102 +0,0 @@
-From 4aed231f49954114d5ae23e97789e9aa540a0b70 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Tue, 16 Jun 2015 12:52:07 +0200
-Subject: [PATCH] USB: bcma: use separated function for USB 2.0 initialization
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This will allow adding USB 3.0 (XHCI) support cleanly.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- drivers/usb/host/bcma-hcd.c | 51 +++++++++++++++++++++++++++++++--------------
- 1 file changed, 35 insertions(+), 16 deletions(-)
-
---- a/drivers/usb/host/bcma-hcd.c
-+++ b/drivers/usb/host/bcma-hcd.c
-@@ -34,6 +34,7 @@ MODULE_DESCRIPTION("Common USB driver fo
- MODULE_LICENSE("GPL");
-
- struct bcma_hcd_device {
-+ struct bcma_device *core;
- struct platform_device *ehci_dev;
- struct platform_device *ohci_dev;
- };
-@@ -293,27 +294,16 @@ err_alloc:
- return ERR_PTR(ret);
- }
-
--static int bcma_hcd_probe(struct bcma_device *dev)
-+static int bcma_hcd_usb20_init(struct bcma_hcd_device *usb_dev)
- {
-- int err;
-+ struct bcma_device *dev = usb_dev->core;
-+ struct bcma_chipinfo *chipinfo = &dev->bus->chipinfo;
- u32 ohci_addr;
-- struct bcma_hcd_device *usb_dev;
-- struct bcma_chipinfo *chipinfo;
--
-- chipinfo = &dev->bus->chipinfo;
--
-- /* TODO: Probably need checks here; is the core connected? */
-+ int err;
-
- if (dma_set_mask_and_coherent(dev->dma_dev, DMA_BIT_MASK(32)))
- return -EOPNOTSUPP;
-
-- usb_dev = devm_kzalloc(&dev->dev, sizeof(struct bcma_hcd_device),
-- GFP_KERNEL);
-- if (!usb_dev)
-- return -ENOMEM;
--
-- bcma_hci_platform_power_gpio(dev, true);
--
- switch (dev->id.id) {
- case BCMA_CORE_NS_USB20:
- bcma_hcd_init_chip_arm(dev);
-@@ -346,7 +336,6 @@ static int bcma_hcd_probe(struct bcma_de
- goto err_unregister_ohci_dev;
- }
-
-- bcma_set_drvdata(dev, usb_dev);
- return 0;
-
- err_unregister_ohci_dev:
-@@ -354,6 +343,36 @@ err_unregister_ohci_dev:
- return err;
- }
-
-+static int bcma_hcd_probe(struct bcma_device *dev)
-+{
-+ int err;
-+ struct bcma_hcd_device *usb_dev;
-+
-+ /* TODO: Probably need checks here; is the core connected? */
-+
-+ usb_dev = devm_kzalloc(&dev->dev, sizeof(struct bcma_hcd_device),
-+ GFP_KERNEL);
-+ if (!usb_dev)
-+ return -ENOMEM;
-+ usb_dev->core = dev;
-+
-+ bcma_hci_platform_power_gpio(dev, true);
-+
-+ switch (dev->id.id) {
-+ case BCMA_CORE_USB20_HOST:
-+ case BCMA_CORE_NS_USB20:
-+ err = bcma_hcd_usb20_init(usb_dev);
-+ if (err)
-+ return err;
-+ break;
-+ default:
-+ return -ENODEV;
-+ }
-+
-+ bcma_set_drvdata(dev, usb_dev);
-+ return 0;
-+}
-+
- static void bcma_hcd_remove(struct bcma_device *dev)
- {
- struct bcma_hcd_device *usb_dev = bcma_get_drvdata(dev);
diff --git a/target/linux/bcm53xx/patches-3.18/812-USB-bcma-add-USB-3.0-support.patch b/target/linux/bcm53xx/patches-3.18/812-USB-bcma-add-USB-3.0-support.patch
deleted file mode 100644
index 30313e8a28..0000000000
--- a/target/linux/bcm53xx/patches-3.18/812-USB-bcma-add-USB-3.0-support.patch
+++ /dev/null
@@ -1,274 +0,0 @@
-From 12c6932caa6b1fce44d0f0c68ec77d4c00ac0be7 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Tue, 16 Jun 2015 17:14:26 +0200
-Subject: [PATCH] USB: bcma: add USB 3.0 support
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- drivers/usb/host/bcma-hcd.c | 219 ++++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 219 insertions(+)
-
---- a/drivers/usb/host/bcma-hcd.c
-+++ b/drivers/usb/host/bcma-hcd.c
-@@ -37,6 +37,7 @@ struct bcma_hcd_device {
- struct bcma_device *core;
- struct platform_device *ehci_dev;
- struct platform_device *ohci_dev;
-+ struct platform_device *xhci_dev;
- };
-
- /* Wait for bitmask in a register to get set or cleared.
-@@ -343,6 +344,215 @@ err_unregister_ohci_dev:
- return err;
- }
-
-+static bool bcma_wait_reg(struct bcma_bus *bus, void __iomem *addr, u32 mask,
-+ u32 value, int timeout)
-+{
-+ unsigned long deadline = jiffies + timeout;
-+ u32 val;
-+
-+ do {
-+ val = readl(addr);
-+ if ((val & mask) == value)
-+ return true;
-+ cpu_relax();
-+ udelay(10);
-+ } while (!time_after_eq(jiffies, deadline));
-+
-+ pr_err("Timeout waiting for register %p\n", addr);
-+
-+ return false;
-+}
-+
-+static void bcma_hcd_usb30_phy_init(struct bcma_hcd_device *bcma_hcd)
-+{
-+ struct bcma_device *core = bcma_hcd->core;
-+ struct bcma_bus *bus = core->bus;
-+ struct bcma_chipinfo *chipinfo = &bus->chipinfo;
-+ struct bcma_drv_cc_b *ccb = &bus->drv_cc_b;
-+ struct bcma_device *arm_core;
-+ void __iomem *dmu = NULL;
-+ u32 cru_straps_ctrl;
-+
-+ if (chipinfo->id != BCMA_CHIP_ID_BCM4707 &&
-+ chipinfo->id != BCMA_CHIP_ID_BCM53018)
-+ return;
-+
-+ arm_core = bcma_find_core(bus, BCMA_CORE_ARMCA9);
-+ if (!arm_core)
-+ return;
-+
-+ dmu = ioremap_nocache(arm_core->addr_s[0], 0x1000);
-+ if (!dmu)
-+ goto out;
-+
-+ /* Check strapping of PCIE/USB3 SEL */
-+ cru_straps_ctrl = ioread32(dmu + 0x2a0);
-+ if ((cru_straps_ctrl & 0x10) == 0)
-+ goto out;
-+
-+ /* Perform USB3 system soft reset */
-+ bcma_awrite32(core, BCMA_RESET_CTL, BCMA_RESET_CTL_RESET);
-+
-+ /* Enable MDIO. Setting MDCDIV as 26 */
-+ iowrite32(0x0000009a, ccb->mii + 0x000);
-+ udelay(2);
-+
-+ switch (chipinfo->id) {
-+ case BCMA_CHIP_ID_BCM4707:
-+ if (chipinfo->rev == 4) {
-+ /* For NS-B0, USB3 PLL Block */
-+ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
-+ iowrite32(0x587e8000, ccb->mii + 0x004);
-+
-+ /* Clear ana_pllSeqStart */
-+ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
-+ iowrite32(0x58061000, ccb->mii + 0x004);
-+
-+ /* CMOS Divider ratio to 25 */
-+ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
-+ iowrite32(0x582a6400, ccb->mii + 0x004);
-+
-+ /* Asserting PLL Reset */
-+ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
-+ iowrite32(0x582ec000, ccb->mii + 0x004);
-+
-+ /* Deaaserting PLL Reset */
-+ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
-+ iowrite32(0x582e8000, ccb->mii + 0x004);
-+
-+ /* Deasserting USB3 system reset */
-+ bcma_awrite32(core, BCMA_RESET_CTL, 0);
-+
-+ /* Set ana_pllSeqStart */
-+ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
-+ iowrite32(0x58069000, ccb->mii + 0x004);
-+
-+ /* RXPMD block */
-+ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
-+ iowrite32(0x587e8020, ccb->mii + 0x004);
-+
-+ /* CDR int loop locking BW to 1 */
-+ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
-+ iowrite32(0x58120049, ccb->mii + 0x004);
-+
-+ /* CDR int loop acquisition BW to 1 */
-+ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
-+ iowrite32(0x580e0049, ccb->mii + 0x004);
-+
-+ /* CDR prop loop BW to 1 */
-+ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
-+ iowrite32(0x580a005c, ccb->mii + 0x004);
-+
-+ /* Waiting MII Mgt interface idle */
-+ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
-+ } else {
-+ /* PLL30 block */
-+ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
-+ iowrite32(0x587e8000, ccb->mii + 0x004);
-+
-+ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
-+ iowrite32(0x582a6400, ccb->mii + 0x004);
-+
-+ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
-+ iowrite32(0x587e80e0, ccb->mii + 0x004);
-+
-+ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
-+ iowrite32(0x580a009c, ccb->mii + 0x004);
-+
-+ /* Enable SSC */
-+ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
-+ iowrite32(0x587e8040, ccb->mii + 0x004);
-+
-+ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
-+ iowrite32(0x580a21d3, ccb->mii + 0x004);
-+
-+ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
-+ iowrite32(0x58061003, ccb->mii + 0x004);
-+
-+ /* Waiting MII Mgt interface idle */
-+ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
-+
-+ /* Deasserting USB3 system reset */
-+ bcma_awrite32(core, BCMA_RESET_CTL, 0);
-+ }
-+ break;
-+ case BCMA_CHIP_ID_BCM53018:
-+ /* USB3 PLL Block */
-+ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
-+ iowrite32(0x587e8000, ccb->mii + 0x004);
-+
-+ /* Assert Ana_Pllseq start */
-+ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
-+ iowrite32(0x58061000, ccb->mii + 0x004);
-+
-+ /* Assert CML Divider ratio to 26 */
-+ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
-+ iowrite32(0x582a6400, ccb->mii + 0x004);
-+
-+ /* Asserting PLL Reset */
-+ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
-+ iowrite32(0x582ec000, ccb->mii + 0x004);
-+
-+ /* Deaaserting PLL Reset */
-+ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
-+ iowrite32(0x582e8000, ccb->mii + 0x004);
-+
-+ /* Waiting MII Mgt interface idle */
-+ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
-+
-+ /* Deasserting USB3 system reset */
-+ bcma_awrite32(core, BCMA_RESET_CTL, 0);
-+
-+ /* PLL frequency monitor enable */
-+ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
-+ iowrite32(0x58069000, ccb->mii + 0x004);
-+
-+ /* PIPE Block */
-+ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
-+ iowrite32(0x587e8060, ccb->mii + 0x004);
-+
-+ /* CMPMAX & CMPMINTH setting */
-+ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
-+ iowrite32(0x580af30d, ccb->mii + 0x004);
-+
-+ /* DEGLITCH MIN & MAX setting */
-+ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
-+ iowrite32(0x580e6302, ccb->mii + 0x004);
-+
-+ /* TXPMD block */
-+ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
-+ iowrite32(0x587e8040, ccb->mii + 0x004);
-+
-+ /* Enabling SSC */
-+ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
-+ iowrite32(0x58061003, ccb->mii + 0x004);
-+
-+ /* Waiting MII Mgt interface idle */
-+ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
-+
-+ break;
-+ }
-+out:
-+ if (dmu)
-+ iounmap(dmu);
-+}
-+
-+static int bcma_hcd_usb30_init(struct bcma_hcd_device *bcma_hcd)
-+{
-+ struct bcma_device *core = bcma_hcd->core;
-+
-+ bcma_core_enable(core, 0);
-+
-+ bcma_hcd_usb30_phy_init(bcma_hcd);
-+
-+ bcma_hcd->xhci_dev = bcma_hcd_create_pdev(core, "xhci-hcd", core->addr,
-+ NULL, 0);
-+ if (IS_ERR(bcma_hcd->ohci_dev))
-+ return PTR_ERR(bcma_hcd->ohci_dev);
-+
-+ return 0;
-+}
-+
- static int bcma_hcd_probe(struct bcma_device *dev)
- {
- int err;
-@@ -365,6 +575,11 @@ static int bcma_hcd_probe(struct bcma_de
- if (err)
- return err;
- break;
-+ case BCMA_CORE_NS_USB30:
-+ err = bcma_hcd_usb30_init(usb_dev);
-+ if (err)
-+ return err;
-+ break;
- default:
- return -ENODEV;
- }
-@@ -378,11 +593,14 @@ static void bcma_hcd_remove(struct bcma_
- struct bcma_hcd_device *usb_dev = bcma_get_drvdata(dev);
- struct platform_device *ohci_dev = usb_dev->ohci_dev;
- struct platform_device *ehci_dev = usb_dev->ehci_dev;
-+ struct platform_device *xhci_dev = usb_dev->xhci_dev;
-
- if (ohci_dev)
- platform_device_unregister(ohci_dev);
- if (ehci_dev)
- platform_device_unregister(ehci_dev);
-+ if (xhci_dev)
-+ platform_device_unregister(xhci_dev);
-
- bcma_core_disable(dev, 0);
- }
-@@ -419,6 +637,7 @@ static int bcma_hcd_resume(struct bcma_d
- static const struct bcma_device_id bcma_hcd_table[] = {
- BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_USB20_HOST, BCMA_ANY_REV, BCMA_ANY_CLASS),
- BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_NS_USB20, BCMA_ANY_REV, BCMA_ANY_CLASS),
-+ BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_NS_USB30, BCMA_ANY_REV, BCMA_ANY_CLASS),
- BCMA_CORETABLE_END
- };
- MODULE_DEVICE_TABLE(bcma, bcma_hcd_table);
diff --git a/target/linux/bcm53xx/patches-3.18/813-USB-bcma-fix-setting-VCC-GPIO-value.patch b/target/linux/bcm53xx/patches-3.18/813-USB-bcma-fix-setting-VCC-GPIO-value.patch
deleted file mode 100644
index 9ba3bdeece..0000000000
--- a/target/linux/bcm53xx/patches-3.18/813-USB-bcma-fix-setting-VCC-GPIO-value.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From bdc3b01d94b22f8b5f9621a1c37336e78f4f1bce Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Sun, 21 Jun 2015 12:09:57 +0200
-Subject: [PATCH] USB: bcma: fix setting VCC GPIO value
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It wasn't working (on most of devices?) without setting GPIO direction
-and wasn't respecting ACTIVE_LOW flag.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- drivers/usb/host/bcma-hcd.c | 13 +++++++++----
- 1 file changed, 9 insertions(+), 4 deletions(-)
-
---- a/drivers/usb/host/bcma-hcd.c
-+++ b/drivers/usb/host/bcma-hcd.c
-@@ -230,17 +230,22 @@ static void bcma_hcd_init_chip_arm(struc
-
- static void bcma_hci_platform_power_gpio(struct bcma_device *dev, bool val)
- {
-+ enum of_gpio_flags of_flags;
- int gpio;
-
-- gpio = of_get_named_gpio(dev->dev.of_node, "vcc-gpio", 0);
-+ gpio = of_get_named_gpio_flags(dev->dev.of_node, "vcc-gpio", 0, &of_flags);
- if (!gpio_is_valid(gpio))
- return;
-
- if (val) {
-- gpio_request(gpio, "bcma-hcd-gpio");
-- gpio_set_value(gpio, 1);
-+ unsigned long flags = 0;
-+ bool active_low = !!(of_flags & OF_GPIO_ACTIVE_LOW);
-+
-+ flags |= active_low ? GPIOF_ACTIVE_LOW : 0;
-+ flags |= active_low ? GPIOF_INIT_LOW : GPIOF_INIT_HIGH;
-+ gpio_request_one(gpio, flags, "bcma-hcd-gpio");
- } else {
-- gpio_set_value(gpio, 0);
-+ gpiod_set_value(gpio_to_desc(gpio), 0);
- gpio_free(gpio);
- }
- }
diff --git a/target/linux/bcm53xx/patches-3.18/820-xhci-add-Broadcom-specific-fake-doorbell.patch b/target/linux/bcm53xx/patches-3.18/820-xhci-add-Broadcom-specific-fake-doorbell.patch
deleted file mode 100644
index d459520d3f..0000000000
--- a/target/linux/bcm53xx/patches-3.18/820-xhci-add-Broadcom-specific-fake-doorbell.patch
+++ /dev/null
@@ -1,94 +0,0 @@
-From 9cc14ca0aae53c16d10ffea49848ac61a5015562 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Sun, 21 Jun 2015 11:10:49 +0200
-Subject: [PATCH] xhci: add Broadcom specific fake doorbell
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This fixes problem with controller seeing devices only in some small
-percentage of cold boots.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- drivers/usb/host/xhci.c | 62 +++++++++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 62 insertions(+)
-
---- a/drivers/usb/host/xhci.c
-+++ b/drivers/usb/host/xhci.c
-@@ -122,6 +122,64 @@ int xhci_halt(struct xhci_hcd *xhci)
- return ret;
- }
-
-+#ifdef CONFIG_ARCH_BCM_5301X
-+int xhci_fake_doorbell(struct xhci_hcd *xhci, int slot_id)
-+{
-+ unsigned int temp1, ret;
-+
-+ /* alloc a virt device for slot */
-+ if (!xhci_alloc_virt_device(xhci, slot_id, 0, GFP_NOIO)) {
-+ xhci_warn(xhci, "Could not allocate xHCI USB device data structures\n");
-+ return 1;
-+ }
-+
-+ /* ring fake doorbell for slot_id ep 0 */
-+ xhci_ring_ep_doorbell(xhci, slot_id, 0, 0);
-+ mdelay(1);
-+
-+ /* read the status register to check if HSE is set or not? */
-+ temp1 = readl(&xhci->op_regs->status);
-+ xhci_dbg(xhci, "op reg status = %x\n",temp1);
-+
-+ /* clear HSE if set */
-+ if(temp1 & STS_FATAL) {
-+ xhci_dbg(xhci, "HSE problem detected\n");
-+ temp1 &= ~(0x1fff);
-+ temp1 |= STS_FATAL;
-+ xhci_dbg(xhci, "temp1=%x\n",temp1);
-+ writel(temp1, &xhci->op_regs->status);
-+ mdelay(1);
-+ temp1 = readl(&xhci->op_regs->status);
-+ xhci_dbg(xhci, "After clear op reg status=%x\n", temp1);
-+ }
-+
-+ /* Free virt device */
-+ xhci_free_virt_device(xhci, slot_id);
-+
-+ /* Run the controller if needed */
-+ temp1 = readl(&xhci->op_regs->command);
-+ if (temp1 & CMD_RUN)
-+ return 0;
-+ temp1 |= (CMD_RUN);
-+
-+ writel(temp1, &xhci->op_regs->command);
-+ /*
-+ * Wait for the HCHalted Status bit to be 0 to indicate the host is running.
-+ */
-+ ret = xhci_handshake(xhci, &xhci->op_regs->status,
-+ STS_HALT, 0, XHCI_MAX_HALT_USEC);
-+
-+ if (ret == -ETIMEDOUT) {
-+ xhci_err(xhci, "Host took too long to start, "
-+ "waited %u microseconds.\n",
-+ XHCI_MAX_HALT_USEC);
-+ return 1;
-+ }
-+
-+ return 0;
-+}
-+#endif /* CONFIG_ARCH_BCM_5301X */
-+
- /*
- * Set the run bit and wait for the host to be running.
- */
-@@ -146,6 +204,10 @@ static int xhci_start(struct xhci_hcd *x
- xhci_err(xhci, "Host took too long to start, "
- "waited %u microseconds.\n",
- XHCI_MAX_HALT_USEC);
-+#ifdef CONFIG_ARCH_BCM_5301X
-+ xhci_fake_doorbell(xhci, 1);
-+#endif /* CONFIG_ARCH_BCM_5301X */
-+
- if (!ret)
- xhci->xhc_state &= ~XHCI_STATE_HALTED;
- return ret;
diff --git a/target/linux/bcm53xx/patches-3.18/901-mtd-bcm47xxpart-workaround-for-Asus-RT-AC87U-asus-pa.patch b/target/linux/bcm53xx/patches-3.18/901-mtd-bcm47xxpart-workaround-for-Asus-RT-AC87U-asus-pa.patch
deleted file mode 100644
index c1dfa92013..0000000000
--- a/target/linux/bcm53xx/patches-3.18/901-mtd-bcm47xxpart-workaround-for-Asus-RT-AC87U-asus-pa.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From 21500872c1dba33848ddcf6bea97d58772675d36 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Sun, 17 May 2015 14:00:52 +0200
-Subject: [PATCH] mtd: bcm47xxpart: workaround for Asus RT-AC87U "asus"
- partition
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- drivers/mtd/bcm47xxpart.c | 12 ++++++++++++
- 1 file changed, 12 insertions(+)
-
---- a/drivers/mtd/bcm47xxpart.c
-+++ b/drivers/mtd/bcm47xxpart.c
-@@ -14,6 +14,7 @@
- #include <linux/slab.h>
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
-+#include <linux/of.h>
-
- #include <uapi/linux/magic.h>
-
-@@ -135,6 +136,17 @@ static int bcm47xxpart_parse(struct mtd_
- break;
- }
-
-+ /*
-+ * Ugly workaround for Asus RT-AC87U and its "asus" partition.
-+ * It uses JFFS2 which we don't (want to) detect. We should
-+ * probably use DT to define partitions but we need a working
-+ * TRX firmware splitter first.
-+ */
-+ if (of_machine_is_compatible("asus,rt-ac87u") && offset == 0x7ec0000) {
-+ bcm47xxpart_add_part(&parts[curr_part++], "asus", offset, MTD_WRITEABLE);
-+ continue;
-+ }
-+
- /* Read beginning of the block */
- if (mtd_read(master, offset, BCM47XXPART_BYTES_TO_READ,
- &bytes_read, (uint8_t *)buf) < 0) {