| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
| |
Fixes
b43-phy0 ERROR: Firmware file "b43-open/ucode30_mimo.fw" not found
for BCM43217 devices.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 41943
|
|
|
|
|
|
|
|
|
|
|
| |
Rework fallback sprom support by providing different sproms for
different chips. Also make it optional to use.
This likely causes sprom fallback support to break on a few boards.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 41942
|
|
|
|
|
|
|
|
|
| |
Now that BB is branched off, we can now switch to 3.14 and start
breaking stuff again.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 41941
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add a working lzma loader and use it for generating initramfs kernels
to allow easily netbooting elf kernels on devices with a 4 MiB CFE
size limit.
Based on ar71xx's lzma-loader.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 41940
|
|
|
|
|
|
|
|
|
| |
This is based and tested on VoCore Alpha, but other stuff like status/eth LEDs are present on the final board revision + VoDock.
All GPIOs are exported, except spi/i2c.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 41939
|
|
|
|
|
|
|
|
| |
This patch adds support for setting SPI_CS1 as Chip Select, Watchdog reset output and GPIO#27.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 41938
|
|
|
|
|
|
| |
Signed-off-by: Sebastian Wendel <s.wendel@sourceindex.de>
SVN-Revision: 41936
|
|
|
|
|
|
|
|
|
| |
configure enables libzfs support on default.
This will break the build, on systems without libzfs.
Signed-off-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>
SVN-Revision: 41935
|
|
|
|
|
|
| |
Signed-off-by: Alexandru Ardelean <aa@ocedo.com>
SVN-Revision: 41934
|
|
|
|
|
|
|
|
|
|
| |
LED Fix up for the Kingston Mobilelite Wireless (MLW-221)
http://wiki.openwrt.org/toh/kingston/mlw221
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
SVN-Revision: 41933
|
|
|
|
|
|
|
|
|
| |
this caused factory resets when reboot was pressed
Signed-off-by: Brent Thomson <brentthomson@gmail.com>
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41932
|
|
|
|
|
|
|
|
|
|
| |
without this the build for NBG6716 fails due to missing packages
https://dev.openwrt.org/ticket/17325
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41930
|
|
|
|
|
|
|
|
|
| |
* set the system time/data
* "ubus call gps info" will tell you lattitude, longitude, elevation, speed and bearing
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41929
|
|
|
|
|
|
| |
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41928
|
|
|
|
|
|
| |
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41922
|
|
|
|
|
|
| |
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41917
|
|
|
|
|
|
| |
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41916
|
|
|
|
|
|
| |
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41915
|
|
|
|
|
|
| |
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41914
|
|
|
|
|
|
|
|
| |
Use kernel 3.14 by default and refresh the patches
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 41913
|
|
|
|
|
|
| |
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 41912
|
|
|
|
|
|
| |
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 41911
|
|
|
|
|
|
| |
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 41910
|
|
|
|
|
|
| |
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 41909
|
|
|
|
|
|
|
|
|
|
| |
This add 5GHz support for N-PHY to b43, thanks Rafał Miłecki.
b43_wflush16 was put into an extra function because it is pretty big in asm.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 41900
|
|
|
|
|
|
|
|
|
|
|
| |
This is a backport of bcma from wireless-tesing/master tag master-2014-07-29-1.
For kernel < 3.10 this only adds the header changes needed by more
recent b43 versions.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 41899
|
|
|
|
|
|
| |
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 41898
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The package supports Generic Routing Encapsulation support by registering following protocol kinds:
-gre
-gretap
-grev6
-grev6tap
Following options are valid for gre and gretap kinds:
-ipaddr
-peeraddr
-df
-mtu
-ttl
-tunlink
-zone
-ikey
-okey
-icsum
-ocsum
-iseqno
-oseqno
The gretap kind supports additionally the network option
Following options are valid for grev6 and grev6tap kinds:
-ip6addr
-peer6addr
-weakif
-mtu
-ttl
-tunlink
-zone
-ikey
-okey
-icsum
-ocsum
-iseqno
-oseqno
The grev6tap kind supports additionally the network option
Typical network config for a GREv4 tunnel :
config interface 'gre'
option peeraddr '172.16.18.240'
option mtu '1400'
option proto 'gre'
option tunlink 'wan'
option zone 'tunnel'
Typical network config for a GREv4 tap tunnel :
config interface 'gretap'
option peeraddr '195.207.5.79'
option mtu '1400'
option proto 'gretap'
option zone 'tunnel'
option tunlink 'wan'
option network 'wlan_ap'
I added myself as maintainer for the moment; feel free to change.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
SVN-Revision: 41897
|
|
|
|
| |
SVN-Revision: 41896
|
|
|
|
|
|
| |
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
SVN-Revision: 41893
|
|
|
|
|
|
| |
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
SVN-Revision: 41892
|
|
|
|
|
|
| |
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41891
|
|
|
|
| |
SVN-Revision: 41887
|
|
|
|
|
|
|
|
|
| |
Make sure they don't break the sed command, and also make device_info
and openwrt_release more robust for parsing by scripts
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41885
|
|
|
|
|
|
|
|
|
|
|
| |
Creates /etc/device_info which will be used to fill in information for
WPS and other protocols that need manufacturer/device information
This helps with creating OpenWrt firmware for OEM or rebranded devices.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41884
|
|
|
|
|
|
|
|
| |
https://dev.openwrt.org/ticket/17296
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41882
|
|
|
|
| |
SVN-Revision: 41875
|
|
|
|
|
|
| |
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41874
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This change introduces support for wildcard patterns in "option path"
of section "wifi-device".
Objective is to allow paths like "*/usb[0-9]/*/*" in order to claim
any usb device using the same backend type, regardless of its bus
address or phy name.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 41873
|
|
|
|
|
|
|
|
|
|
| |
This patch brings full dynamic vlan support to netifd that existed in hostapd.sh in Attitude Adjustment.
Signed-off-by: Joseph CG Walker <Joe@ChubbyPenguin.net>
[jow@openwrt.org: changed commit message, rebased on top of current hostapd.sh]
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 41872
|
|
|
|
|
|
| |
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41871
|
|
|
|
|
|
| |
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 41870
|
|
|
|
| |
SVN-Revision: 41867
|
|
|
|
|
|
|
|
| |
track uncommitted changes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41865
|
|
|
|
|
|
| |
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41863
|
|
|
|
| |
SVN-Revision: 41862
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Use an empty nvram_header to tell wl that there is no nvram buf.
wl else might try to allocate huge amount of memory because the
bcm63xx's nvram does not match the expected structure and contains
random values.
Fixes the following warning on load of wl:
[ 9.152000] WARNING: at mm/slab_common.c:377 kmalloc_slab+0x4c/0xc0()
[ 9.160000] Modules linked in: wl(P+) wl_glue ipv6 gpio_keys_polled input_polldev button_hotplug input_core
[ 9.168000] CPU: 0 PID: 366 Comm: kmodloader Tainted: P 3.10.49 #1
[ 9.176000] Stack : 00000000 00000000 00000000 00000000 8034b77a 00000042 81ac9af0 c02e0000
[ 9.176000] 8028bf70 802df31b 0000016e 8034af28 81ac9af0 c02e0000 c02e0000 81b39810
[ 9.176000] 0000002d 8002c9d4 00000003 8002a3c8 802937a0 c02e0000 8028e528 81ab398c
[ 9.176000] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 9.176000] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 81ab3918
[ 9.176000] ...
[ 9.212000] Call Trace:
[ 9.216000] [<800224b8>] show_stack+0x48/0x70
[ 9.220000] [<8002a538>] warn_slowpath_common+0x78/0xa8
[ 9.224000] [<8002a5f0>] warn_slowpath_null+0x18/0x24
[ 9.228000] [<8008145c>] kmalloc_slab+0x4c/0xc0
[ 9.236000] [<80097258>] __kmalloc+0x20/0x10c
[ 9.240000] [<80e23b90>] osl_malloc+0x24/0x6c [wl]
[ 9.244000] [<80e15288>] nvram_init+0x54/0x164 [wl]
[ 9.252000] [<80e08668>] si_pci_fixcfg+0x60c/0x9e8 [wl]
[ 9.256000]
[ 9.260000] ---[ end trace b5c4dbb046cf3c83 ]---
Reported-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 41861
|
|
|
|
|
|
|
|
| |
ath9k failed to come up due to a bad mac addr
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41860
|
|
|
|
|
|
|
|
| |
This appears to be a typo.
Signed-off-by: Russell Senior <russell@personaltelco.net>
SVN-Revision: 41859
|
|
|
|
|
|
|
|
|
|
| |
Fix a typo: gpio 21 is already used for the WPS led. Gpio 20 is the
right one (tested) for the mode switch. Confirmed that
/sys/kernel/debug/gpio state followed the position of the switch.
Signed-off-by: Russell Senior <russell@personaltelco.net>
SVN-Revision: 41858
|