summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* br2684ctl: resolve a boot time race condition with nas0 bringup by using ↵Felix Fietkau2016-01-183-13/+7
| | | | | | | | explicit notification when init is done Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48321
* br2684ctl: add support for notifying nas* bringup via a scriptFelix Fietkau2016-01-181-0/+54
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48320
* lantiq: fix VDSL device detection with Linux 4.4Felix Fietkau2016-01-181-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48319
* ramips: delete the broken sound driverFelix Fietkau2016-01-182-8488/+0
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48318
* ramips: mark kmod-sound-mtk as broken, it does not compile properlyFelix Fietkau2016-01-181-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48317
* ramips: fix kernel config handling for mt7620/mt7628 sound moduleFelix Fietkau2016-01-181-4/+35
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48316
* firewall: add CONFIG_IPV6 to PKG_CONFIG_DEPENDS to fix a rebuild errorFelix Fietkau2016-01-181-0/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48315
* iptables: fix rebuild errors on configuration changesFelix Fietkau2016-01-181-0/+14
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48314
* build: use sstrip by default for muslFelix Fietkau2016-01-181-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48313
* openssl: remove the separate configuration menu, use the implicit one (via ↵Felix Fietkau2016-01-181-7/+6
| | | | | | | | | | MENU:=1) Fixes warning on selecting OPENSSL_ENGINE_CRYPTO if openssl is not selected Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48312
* brcm2708: fix RPi model B plus supportFelix Fietkau2016-01-181-0/+1
| | | | | | | | Not sure if B+ is used or not (mine has B Plus) so leave both Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 48311
* kernel: fix MIPS linux-4.4 build on non-GNU systemsFelix Fietkau2016-01-181-0/+18
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48310
* wpa_supplicant: improve generating phase2 config line for WPA-EAPFelix Fietkau2016-01-181-2/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | WPA-EAP supports several phase2 (=inner) authentication methods when using EAP-TTLS, EAP-PEAP or EAP-FAST (the latter is added as a first step towards the UCI model supporting EAP-FAST by this commit) The value of the auth config variable was previously expected to be directly parseable as the content of the 'phase2' option of wpa_supplicant. This exposed wpa_supplicant's internals, leaving it to view-level to set the value properly. Unfortunately, this is currently not the case, as LuCI currently allows values like 'PAP', 'CHAP', 'MSCHAPV2'. Users thus probably diverged and set auth to values like 'auth=MSCHAPV2' as a work-around. This behaviour isn't explicitely documented anywhere and is not quite intuitive... The phase2-string is now generated according to $eap_type and $auth, following the scheme also found in hostap's test-cases: http://w1.fi/cgit/hostap/tree/tests/hwsim/test_ap_eap.py The old behaviour is also still supported for the sake of not breaking existing, working configurations. Examples: eap_type auth 'ttls' 'EAP-MSCHAPV2' -> phase2="autheap=MSCHAPV2" 'ttls' 'MSCHAPV2' -> phase2="auth=MSCHAPV2" 'peap' 'EAP-GTC' -> phase2="auth=GTC" Deprecated syntax supported for compatibility: 'ttls' 'autheap=MSCHAPV2' -> phase2="autheap=MSCHAPV2" I will suggest a patch to LuCI adding EAP-MSCHAPV2, EAP-GTC, ... to the list of Authentication methods available. Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 48309
* lantiq: ltq-deu: Remove the "DEU test manager"Felix Fietkau2016-01-183-13561/+0
| | | | | | | | | | | Remove the "DEU test manager" code which has not been used for more than two years (as the kernel module is not installed anymore since r38731). This fixes compilation on kernel 4.3, which removes aead_request_set_assoc (and newer kernels). Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 48308
* lantiq: Add support for linux 4.4Felix Fietkau2016-01-1835-0/+18096
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following patches were dropped because they are already applied upstream: - 0038-MIPS-lantiq-fpi-on-ar9.patch - 0039-MIPS-lantiq-initialize-usb-on-boot.patch - 0042-USB-DWC2-big-endian-support.patch - 0043-gpio-stp-xway-fix-phy-mask.patch All other patches were simply refreshed, except the following: - 0001-MIPS-lantiq-add-pcie-driver.patch Changes to arch/mips/lantiq/xway/sysctrl.c (these changes disabled some PMU gates for the vrx200 / VR9 SoCs) were removed since the upstream kernel disables unused PMU gates automatically (since 95135bfa7ead1becc2879230f72583dde2b71a0c "MIPS: Lantiq: Deactivate most of the devices by default"). - 0025-NET-MIPS-lantiq-adds-xrx200-net.patch Since OpenWrt commit 55ba20afcc2fe785146316e5be2c2473cb329885 drivers should use of_get_mac_address(). of_get_mac_address_mtd is not available for drivers anymore since it's called automatically within of_get_mac_address(). - 0028-NET-lantiq-various-etop-fixes.patch Same changes as in 0025-NET-MIPS-lantiq-adds-xrx200-net.patch While refreshing the kernel configuration SPI support had to be moved to config-4.4 because otherwise M25P80 was disabled. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 48307
* busybox: fix broken IPv6 address displaying in ifconfigFelix Fietkau2016-01-181-0/+23
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48306
* brcm63xx: add support for Huawei HG622Jonas Gorski2016-01-1811-0/+240
| | | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 48305
* ipq806x: fix sysupgrade for AP148Jonas Gorski2016-01-181-2/+2
| | | | | | | | | AP148 uses lowercase name as boardname, so we need to use this in platform.sh as well. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 48304
* brcm63xx: fix platform gpio lookups for gpios < 32Jonas Gorski2016-01-184-38/+20
| | | | | | | | | | | | | Overwriting static strings is never a good idea, especially expecting identical strings to be stored in different memory locations. This caused the lookups to always return the second chip's name. Fix this by just initializing the lookup with the right values, so we don't need to modify the strings at all. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 48303
* b53: update header register difinitionsJonas Gorski2016-01-181-1/+2
| | | | | | | | | BCM531x5 has two pontential cpu ports, and header mode can be enabled independently on both. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 48302
* package/libs/libiconv: function namesJo-Philipp Wich2016-01-181-0/+4
| | | | | | | | | | | | | | | | | | | | | | Currently libiconv-stub and libiconv-full use different names for functions iconv, iconv_open, and iconv_close. This may lead to failures when building modules, e.g. with apr-util when NLS is not activated. The two modules libiconv-stub and libiconv-full should be interchangeable, so we need the same function names. cf. http://git.savannah.gnu.org/cgit/libiconv.git/tree/include/iconv.h.in After applying this patch execute make distclean Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> SVN-Revision: 48301
* imx6: drop 4.1 supportLuka Perkov2016-01-1813-2862/+0
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 48300
* imx6: drop 4.3 supportLuka Perkov2016-01-1818-2978/+0
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 48299
* imx6: move to 4.4 kernelLuka Perkov2016-01-181-1/+1
| | | | | | Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com> SVN-Revision: 48298
* mpc85xx: update to linux 4.4, remove unnecessary patchesFelix Fietkau2016-01-1712-186/+53
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48297
* iproute2: remove odd conffiles generationFelix Fietkau2016-01-171-4/+0
| | | | | | | | | This was generating a conffiles list that included the binary and CONTROL/ files. Signed-off-by: Rob Mosher <nyt-openwrt@countercultured.net> SVN-Revision: 48296
* lantiq: Remove incorrect PCIe compatible stringsFelix Fietkau2016-01-172-5/+0
| | | | | | | | | Re-defining the compatible property is not required since the correct value is inherited from vr9.dtsi. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 48295
* lantiq: Remove the old SPI driver patchFelix Fietkau2016-01-171-1048/+0
| | | | | | Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 48294
* lantiq: Switch to the new SPI driverFelix Fietkau2016-01-1710-35/+94
| | | | | | | | | | | | | | | | Compared to the "old" driver: - Each device must assign a pinctrl setting to the SPI node to allow the new SPI driver to configure the SPI pins. While here we are also using separate input and output settings so we are independent of whether the bootloader configures the pins correctly. - We use the new "compatible" strings to make the driver choose the correct number of chip-selects for each SoC. - The new driver starts counting the chip-selects at 1 (instead of 0, like the old one did). Thus we have to adjust the devices accordingly. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 48293
* lantiq: Add a rewritten version of the SPI driverFelix Fietkau2016-01-171-0/+1133
| | | | | | | | | | | | | The new driver provides a few improvements over the old one: - Separate compatible strings per SoC type (this allows removing some hardcoded of_device_is_compatible() checks) - It does not rely upon spi-bitbang anymore - chip-selects are numbered as in the datasheet (= starting at 1 instead of 0) Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 48292
* lantiq: Disable CONFIG_SPI_GPIOFelix Fietkau2016-01-172-2/+0
| | | | | | | | | All devices are now using the HW SPI driver, so this is not necessary anymore. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 48291
* lantiq: Enable the hardware SPI driver on the DGN3500/DGN3500BFelix Fietkau2016-01-171-53/+38
| | | | | | Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 48290
* lantiq: Enable SPI for the EASY80920 board againFelix Fietkau2016-01-171-46/+41
| | | | | | | | Also switch to the SPI definition provided by vr9.dtsi Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 48289
* lantiq: Switch FRITZ3370 from spi-gpio to the hardware SPI driverFelix Fietkau2016-01-171-40/+31
| | | | | | Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 48288
* lantiq: Re-use the SPI node from vr9.dtsi in TDW89X0.dtsiFelix Fietkau2016-01-171-40/+36
| | | | | | | | This removes the duplicate SPI register definition. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 48287
* lantiq: Add the SPI node to ar9.dtsi and vr9.dtsiFelix Fietkau2016-01-172-0/+20
| | | | | | | | | | This allows devices to use SPI without having to re-define (and thus duplicating) the whole SPI node. By default SPI is disabled (as before) because only few devices need it. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 48286
* lantiq: Configure the PCIe reset GPIO using OFFelix Fietkau2016-01-172-3/+111
| | | | | | | | | | | | | | | | | | | | | | | After the latest pinctrl backports there are only 50 (instead of 56 as before) GPIOs/pins exported (thus the first GPIO on VRX200 SoCs is now 462, before it was 456). This means that any hardcoded GPIOs have to be adjusted. This broke the PCIe driver (which seems to be the only driver which uses hardcoded GPIO numbers), it only reports: ifx_pcie_wait_phy_link_up timeout ifx_pcie_wait_phy_link_up timeout ifx_pcie_wait_phy_link_up timeout ifx_pcie_wait_phy_link_up timeout ifx_pcie_wait_phy_link_up timeout pcie_rc_initialize link up failed!!!!! To prevent more of these issues in the future we remove the hardcoded PCIe reset GPIO definition and simply pass it via device-tree (like the PCI driver does). Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 48285
* lantiq: Use the new pinctrl compatible stringsFelix Fietkau2016-01-174-4/+4
| | | | | | | | | | | | | | | | These were introduced in upstream commit be14811c03cf "pinctrl/lantiq: introduce new dedicated devicetree bindings" and finally allow us to use the individual pins within our dts (for example spi_clk, etc.). Please note that this changes the number of GPIOs which are available for some SoCs. VRX200 SoCs for example only have 50 pins, but previously 56 pins were exposed. This means that all places which are using hardcoded GPIO numbers (which are not passed via device-tree) need to be adjusted (because the first GPIO number is now 462, instead of 456). Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 48284
* lantiq: Backport upstream pinctrl-xway patches from 4.5Felix Fietkau2016-01-175-28/+1436
| | | | | | | | | | | | | | | | Upstream commit be14811c03cf2 "pinctrl/lantiq: introduce new dedicated devicetree bindings" allows us to use each pin in the pinmux. This is useful for example in the "spi" group which contains some pins which are inputs, and some which are outputs. These can only be used once the new compatible strings for the pinctrl node are used. Additionally 0150-lantiq-pinctrl-xway.patch and the "GPIO PORT3 fix" (which was part of 0012-pinctrl-lantiq-fix-up-pinmux.patch) were replaced with their upstream variants which are also in 4.5. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 48283
* lantiq: ltq-deu: Make the DEU driver compatible with linux 4.2 and newerFelix Fietkau2016-01-176-6/+6
| | | | | | | | | | | Upstream linux 4.2 commit 84be456f883c4685680fba8e5154b5f72e92957e "remove <asm/scatterlist.h>" requires us to include linux/scatterlist.h instead. This also works with older kernels (at least 4.1, thanks to Hauke Mehrtens for testing). Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 48282
* base-files: Fix sysupgrade overlay savingJo-Philipp Wich2016-01-171-0/+1
| | | | | | | | | | A previous change to sysupgrade moved the overlay files into upper/ The -c switch generates a list of files to backup, but the sed calls did not take this into consideration. Signed-off-by: Rob Mosher <nyt-openwrt@countercultured.net> SVN-Revision: 48281
* netifd: fix PKG_VERSION (#21630)Jo-Philipp Wich2016-01-171-1/+1
| | | | | | Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 48280
* ar71xx/lzma-loader: fix O32 ABI conformanceGabor Juhos2016-01-171-0/+3
| | | | | | | | | | | | | | | | | | | | | | According to the calling convention of the o32 ABI the caller function must reserve stack space for $a0-$a3 registers in case the callee needs to save its arguments. The assembly code of the loader does not reserve stack space for these registers thus when the 'loader_main' function needs to save its arguments, those will be stored in the 'workspace' area instead of the stack. Because the workspace area is also used by other part of the code, the saved register values gets overwritten and this often leads to failed kernel boots. Fix the code to reserve stack space for the registers to avoid this error. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 48279
* uclient: update to the latest version, adds many fixes/featuresFelix Fietkau2016-01-171-2/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48278
* kernel: add missing kernel config symbol for crypto-rng (fixes #21596)Felix Fietkau2016-01-171-0/+1
| | | | | | Signed-off-by: Lucian Cristian <luci@createc.ro> SVN-Revision: 48277
* ar71xx: Use full 128MB flash on Netgear WNDR4300 and WNDR3700v4Felix Fietkau2016-01-171-1/+1
| | | | | | | | | | Change MTD on WNDR4300 and WNDR3700v4 to fully utilize the 128MB flash. Credit to @Tuochenlyu on GitHub. Signed-off-by: Chris Marchesi <chrism@vancluevertech.com> SVN-Revision: 48276
* mpc85xx: Add PTP node for TL-WD4900 in device treeFelix Fietkau2016-01-171-0/+13
| | | | | | | | | | | | PTP requires at least one timer to be 1PPS so describe it. For testing, load kernel module gianfar_ptp and use ptp4l from linuxptp. Copied from FSL P1010RDB reference design. Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com> SVN-Revision: 48275
* network: add virtual tunnel interface (VTI) supportFelix Fietkau2016-01-172-0/+216
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for configuring VTI interfaces within /etc/config/network. VTI interfaces are used to create IPsec tunnel interfaces. These interfaces may be used for routing and other purposes. Example config: config interface 'vti1' option proto 'vti' option mtu '1500' option tunlink 'wan' option peeraddr '192.168.5.16' option zone 'VPN' option ikey 2 option okey 2 config interface 'vti1_static' option proto 'static' option ifname '@vti1' option ipaddr '192.168.7.2/24' The options ikey and okey correspond to the fwmark value of a ipsec policy. The may be null if you do not want fwmarks. Also peeraddr may be 0.0.0 if you want all ESP packets go through the interface. Example strongswan config: conn vti left=%any leftcert=peer2.test.der leftid=@peer2.test right=192.168.5.16 rightid=@peer3.test leftsubnet=0.0.0.0/0 rightsubnet=0.0.0.0/0 mark=2 auto=route Signed-off-by: André Valentin <avalentin@marcant.net> SVN-Revision: 48274
* netifd: update to the latest version, adds VTI support and a policy routing fixFelix Fietkau2016-01-171-2/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48273
* kernel: add usb-net-sr9700 packageFelix Fietkau2016-01-171-0/+15
| | | | | | | | | Add support for CoreChip-sz SR9700 based USB 1.1 10/100 ethernet devices Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> SVN-Revision: 48272
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 19:50:14 +0000