summaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/dts
Commit message (Collapse)AuthorAgeFilesLines
...
* ramips: fix switch names for several boards in device treeJohn Crispin2015-05-233-4/+4
| | | | | | Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 45723
* ramips: add support for Comfast CF-WR800NJohn Crispin2015-05-231-0/+114
| | | | | | | | | This patch adds support for Comfast CF-WR800N, a wall-plug wireless router based on the MT7620N SoC with one Ethernet port and a 802.11n 2.4 GHz radio. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> SVN-Revision: 45722
* ramips: switch WSR-1166 and WSR-600 to single-firmware mtd layoutFelix Fietkau2015-04-192-22/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45507
* ramips: Add support for Microduino MicroWRTJohn Crispin2015-04-091-0/+107
| | | | | | | | | | | | | | | | MicroWRT is an wireless router with 2 USB,1 ethernet port. It has a 16M flash and 64M DDR2 RAM. You can use most interface, such as i2c, SPI, i2s and PCIe. Besides that there are three expansion borad to combine with the core board. The detailed information, please refer to https://www.microduino.cc/wiki/index.php?title=Main_Page This patch adds support for it. Because there is only one port,so disabled VLAN and use eth0 as lan port. and only a power LED control by power pin. Signed-off-by: 盛凯 <shengkai81@gmail.com> SVN-Revision: 45331
* ramips: Add support for ZTE Q7John Crispin2015-04-011-0/+111
| | | | | | | | | | | | | | | ZTE Q7 is a wireless router with SD Card,USB,1 ethernet port and a battery.It used MT7620a SoC. I can,t find any information about this router on ZTE's website. But I found this : http://en.cctairmobi.com/plus/list.php?tid=40 This router is the same as ZTE Q7 and later I found that both routers are made by the same company:-D This patch adds support for it. Because there is only one port,I disabled VLAN and use eth0 as lan port. I could only create a sysupgrade firmware because I don't know how the orignal webpage check the uploaded image:-( Signed-off-by: 郭传鈜 <gch981213@gmail.com> SVN-Revision: 45208
* ralink: add default pinctrl node for mt7621 eval kitJohn Crispin2015-03-261-0/+9
| | | | | | | | fixes #19213 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 45022
* ralink: add FireWRT power buttonJohn Crispin2015-03-261-0/+5
| | | | | | Signed-off-by: Jay Weng <fl.service@t-firefly.com> SVN-Revision: 45019
* ramips: fix WSR-1166 green power LEDFelix Fietkau2015-03-191-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44898
* ralink: fix mt7621 i2c nameJohn Crispin2015-03-171-2/+2
| | | | | | Signed-off-by: zouxf <fl.service@t-firefly.com> SVN-Revision: 44868
* ralink: add wifi 5g dts info for cy-swr1100John Crispin2015-03-131-1/+8
| | | | | | Signed-off-by: michael lee <igvtee@gmail.com> SVN-Revision: 44739
* ralink: resize the flash partition for FireWRTJohn Crispin2015-03-121-2/+2
| | | | | | Signed-off-by: wengbj <fl.service@t-firefly.com> SVN-Revision: 44691
* ralink: add FireWRT IO multiplexingJohn Crispin2015-03-111-0/+8
| | | | | | Signed-off-by: wengbj <fl.service@t-firefly.com> SVN-Revision: 44660
* ramips: fix the mt7628 dts fileJohn Crispin2015-02-192-10/+11
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 44494
* ramips: Buffalo WZR-AGL300NH target supportJohn Crispin2015-02-161-0/+135
| | | | | | | | | | | | | I got work with this patch. Ethernet switch (includes VLAN), WiFi connected via PCIe, LEDs, buttons. In mtd partion map of DTS file, I renamed Linux firmware regions (kernel + root squashfs) to “firmware”because it allows kernel to split kernel and roots and rootfsdata. signed-off-by: ngc@ff.iij4u.or.jp —— —— SVN-Revision: 44470
* ramips: Kingston MLW221 and MLWG2 cleanupJohn Crispin2015-02-092-115/+115
| | | | | | | | | | MLW221 dts use tabs NOT spaces. MLWG2 dts typo and 1 tab not spaces 01_leds and diag.sh cleanup Signed-off-by: L. D. Pinney <ldpinney@gmail.com> SVN-Revision: 44356
* ramips: fix mt76 radio pcie location definition for in Xiaomi MiWiFi MiniJohn Crispin2015-02-091-1/+2
| | | | | | | | | This patch sets the correct location of the mt76 radio in the pcie bridge (pcie-bridge instead of pcie0). Additionaly, it disables the 2.4 GHz band. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> SVN-Revision: 44355
* ramips: Add mt76 node for Lenovo Y1 and Y1S.John Crispin2015-02-091-0/+9
| | | | | | | | | Both Y1 and Y1S have MT7612E wireless chip so I submitted this patch. Tested on Lenovo Y1. Signed-off-by: 郭传鈜 <gch981213@gmail.com> SVN-Revision: 44354
* ralink: add 3.18 supportJohn Crispin2015-02-0911-5/+46
| | | | | | | | keep default as 3.14, mt7621 gic need to be ported to 3.18 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 44349
* ralink: add FireWRT button detailJohn Crispin2015-02-021-0/+12
| | | | | | Signed-off-by: wengbj <fl.service@t-firefly.com> SVN-Revision: 44242
* ralink: add FireWRT led detailJohn Crispin2015-02-021-0/+9
| | | | | | Signed-off-by: wengbj <fl.service@t-firefly.com> SVN-Revision: 44241
* ralink: add ethernet macaddr to dts for FireWRTJohn Crispin2015-02-021-0/+5
| | | | | | Signed-off-by: wengbj <fl.service@t-firefly.com> SVN-Revision: 44240
* ramips: add support for Xiaomi MiWiFi Mini devicesJohn Crispin2015-02-021-0/+148
| | | | | | | | | This patch adds support for Xiaomi MiWiFi Mini, a 802.11a/b/g/n/ac dual radio wireless router based on the MediaTek MT7620a SoC. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> SVN-Revision: 44238
* ramips: add support for Tenda 3G150BJohn Crispin2015-01-221-0/+114
| | | | | | | | | | | | | | | Add suport for Tenda 3G150B: - cpu: Ralink RT5350F - flash: 4MB - ram: 32MB - 1x USB 2.0 - 1x RJ45 - one reset button - battery powered (BP-4L, 3.7V 1450mAh) Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 44073
* ramips: improve and fix Memory 2 Move supportJohn Crispin2015-01-221-17/+11
| | | | | | | | | | | | | | | | | This patch is a follow up for my previous patch: "ramips: add support for Intenso Memory 2 Move USB 3.0". It fixes a couple of errors in the DTS (one of which broke the gpio-buttons). The kmod-leds-gpio dependency has been dropped as it is already part of the ramips target. Furthermore the ramdisk/uImage image is generated by default for the rt3050 subtarget. This image is needed to flash OpenWrt for the first time onto the device via TFTP. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> SVN-Revision: 44072
* ralink: add support for firewrtJohn Crispin2015-01-201-0/+81
| | | | | | | | this is a mt7621 based board Signed-off-by: wengbj <linux.c@foxmail.com> SVN-Revision: 44055
* ralink: add ethernet fe and esw reset control bitFelix Fietkau2015-01-189-0/+44
| | | | | | Signed-off-by: michael lee <igvtee@gmail.com> SVN-Revision: 44042
* ramips: add preliminary support for DIR-860L B1Felix Fietkau2015-01-171-0/+107
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44016
* ramips: register mt76 device tree info for WSR-1166DHPFelix Fietkau2015-01-171-0/+22
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44010
* ramips: register mt7621 pcie through device treeFelix Fietkau2015-01-171-0/+49
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44009
* ramips: add support for Intenso Memory 2 Move USB 3.0John Crispin2015-01-171-0/+113
| | | | | | | | | | | | | | | | | | | This adds support for a rt5350-based "portable nas" solution from Intenso. The board comes with 32M RAM and 8M Flash, the built-in HDD is connected/accessible via a usb3.0<->sata bridge VLI VL701. The device has 1 Ethernet port (100M/10M), 1 micro b usb 3.0 socket (for charging the battery, or accessing the hdd directly). Wireless connectivity is provided by the rt5350 SoC [i.e.: 802.11n 1x1 2.4 GHz with a pcb antenna.] Serial, leds, wifi, ethernet and usb are tested and as far as I can tell: they are working fine (tm). Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> SVN-Revision: 44001
* ralink: add support for Kingston MLWG2John Crispin2015-01-171-0/+118
| | | | | | | | | | | | | | This patch adds support for the Kingston Mobilelite Wireless G2 (MLWG2) http://wiki.openwrt.org/toh/kingston/mlwg2 https://github.com/gmacario/kingston-mlwg2-hack/wiki/Testing-OpenWrt-on-MLWG2 Tested-by: Gianpaolo Macario <gmacario@gmail.com> Signed-off-by: L. D. Pinney <ldpinney@gmail.com> SVN-Revision: 43990
* ramips: add i2c pingroup to the pinmux for rt-n14uJohn Crispin2015-01-171-1/+1
| | | | | | | | i2c pins are wired to wps a reset button Signed-off-by: Pavel Löbl <lobl.pavel@gmail.com> SVN-Revision: 43985
* ramips: add preliminary Archer C20i supportFelix Fietkau2015-01-091-0/+111
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43898
* ramips: Fix HooToo HT-TM02 support.John Crispin2015-01-081-16/+16
| | | | | | | | | | | | | - Fix LED definitions. - Add mode-switch slider definition (at GPIO 14). - Remove unneeded VLAN now that the ethernet driver is fixed and TCP packets get passed correctly now. (This router only has one port.) - Fix LAN port MAC address, which is defined in the factory partition as WLAN MAC address + 1. - Fix board name, as the company name is HooToo and not HOOTOO. - Remove unnecessary packages from the profile. (The end-user is supposed to use mechanisms such as the ImageBuilder in order to add his own set of packages to his own images... while the precompiled images should just contain the core set of packages needed to run the base functions of a wireless router.) Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net> SVN-Revision: 43883
* ramips: update BR-6475ND dtsJohn Crispin2015-01-081-1/+3
| | | | | | | | Update firmware location for 2.4GHz radio on the Edimax BR-6475nD. Signed-off-by: Christopher Lais <chris+openwrt@zenthought.org> SVN-Revision: 43881
* ramips: fix WSR-600DHP flash layoutFelix Fietkau2015-01-031-1/+6
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43819
* ramips: fix WSR-1166DHP flash layoutFelix Fietkau2015-01-031-3/+13
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43818
* ramips: fix WSR-{600,1166} namesFelix Fietkau2015-01-032-2/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43817
* ramips: on mt7621 only enable xhci for the eval board (still needs patch ↵Felix Fietkau2015-01-032-0/+6
| | | | | | | | cleanup to take effect) Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43815
* ramips: rework and fix m25p80 chunked-io supportFelix Fietkau2015-01-022-2/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43808
* ralink: remove partitoon map from mt7621.dtsiJohn Crispin2014-12-151-31/+0
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43720
* ralink: drop old pinmux nodes from dts filesJohn Crispin2014-12-144-27/+0
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43701
* ramips:Add support for Aigale Ai-BR100John Crispin2014-12-131-0/+106
| | | | | | | | | Aigale Ai-BR100 is a router with mt7620a soc. There are only 2 lights on the board (WAN and WLAN) so I used the wlan light as the status led. Signed-off-by: 郭传鈜 <gch981213@gmail.com> SVN-Revision: 43681
* ralink: make uartf functional on AWM002John Crispin2014-12-121-1/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43664
* ramips: generate factory images for Nexx devicesJohn Crispin2014-12-073-42/+89
| | | | | | Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> SVN-Revision: 43541
* ralink: mt7621 is a 1004KcJohn Crispin2014-12-031-1/+5
| | | | | | Signed-off-by: L. D. Pinney <ldpinney@gmail.com> SVN-Revision: 43514
* ralink: fix pcie resetJohn Crispin2014-11-171-2/+11
| | | | | | | | | some old mt7620a uboots dont reset the pcie core properly. work around this issue in the kernel driver. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43292
* ramips: disable 2.4 ghz on 802.11ac wifi on WHR-1166DFelix Fietkau2014-11-161-0/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43283
* ramips: use mediatek,mtd-eeprom instead of ralink for mt76Felix Fietkau2014-11-161-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43282
* ralink: few updates tot he sdhci probe codeJohn Crispin2014-11-155-2/+20
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43275
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-17 12:33:34 +0000