From 991e641a7651ae45bcd607a081c606b5b9f54053 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Tue, 4 Aug 2015 23:09:28 +0000 Subject: ar71xx: remove linux 3.18 support Signed-off-by: Felix Fietkau SVN-Revision: 46553 --- .../patches-3.18/609-MIPS-ath79-ap136-fixes.patch | 312 --------------------- 1 file changed, 312 deletions(-) delete mode 100644 target/linux/ar71xx/patches-3.18/609-MIPS-ath79-ap136-fixes.patch (limited to 'target/linux/ar71xx/patches-3.18/609-MIPS-ath79-ap136-fixes.patch') diff --git a/target/linux/ar71xx/patches-3.18/609-MIPS-ath79-ap136-fixes.patch b/target/linux/ar71xx/patches-3.18/609-MIPS-ath79-ap136-fixes.patch deleted file mode 100644 index bf64fc6bf5..0000000000 --- a/target/linux/ar71xx/patches-3.18/609-MIPS-ath79-ap136-fixes.patch +++ /dev/null @@ -1,312 +0,0 @@ ---- a/arch/mips/ath79/mach-ap136.c -+++ b/arch/mips/ath79/mach-ap136.c -@@ -18,23 +18,29 @@ - * - */ - --#include --#include -+#include -+#include - --#include "machtypes.h" -+#include -+ -+#include "common.h" -+#include "pci.h" -+#include "dev-ap9x-pci.h" - #include "dev-gpio-buttons.h" -+#include "dev-eth.h" - #include "dev-leds-gpio.h" --#include "dev-spi.h" -+#include "dev-m25p80.h" -+#include "dev-nfc.h" - #include "dev-usb.h" - #include "dev-wmac.h" --#include "pci.h" -+#include "machtypes.h" - --#define AP136_GPIO_LED_STATUS_RED 14 --#define AP136_GPIO_LED_STATUS_GREEN 19 - #define AP136_GPIO_LED_USB 4 --#define AP136_GPIO_LED_WLAN_2G 13 - #define AP136_GPIO_LED_WLAN_5G 12 -+#define AP136_GPIO_LED_WLAN_2G 13 -+#define AP136_GPIO_LED_STATUS_RED 14 - #define AP136_GPIO_LED_WPS_RED 15 -+#define AP136_GPIO_LED_STATUS_GREEN 19 - #define AP136_GPIO_LED_WPS_GREEN 20 - - #define AP136_GPIO_BTN_WPS 16 -@@ -43,37 +49,39 @@ - #define AP136_KEYS_POLL_INTERVAL 20 /* msecs */ - #define AP136_KEYS_DEBOUNCE_INTERVAL (3 * AP136_KEYS_POLL_INTERVAL) - --#define AP136_WMAC_CALDATA_OFFSET 0x1000 --#define AP136_PCIE_CALDATA_OFFSET 0x5000 -+#define AP136_MAC0_OFFSET 0 -+#define AP136_MAC1_OFFSET 6 -+#define AP136_WMAC_CALDATA_OFFSET 0x1000 -+#define AP136_PCIE_CALDATA_OFFSET 0x5000 - - static struct gpio_led ap136_leds_gpio[] __initdata = { - { -- .name = "qca:green:status", -+ .name = "ap136:green:status", - .gpio = AP136_GPIO_LED_STATUS_GREEN, - .active_low = 1, - }, - { -- .name = "qca:red:status", -+ .name = "ap136:red:status", - .gpio = AP136_GPIO_LED_STATUS_RED, - .active_low = 1, - }, - { -- .name = "qca:green:wps", -+ .name = "ap136:green:wps", - .gpio = AP136_GPIO_LED_WPS_GREEN, - .active_low = 1, - }, - { -- .name = "qca:red:wps", -+ .name = "ap136:red:wps", - .gpio = AP136_GPIO_LED_WPS_RED, - .active_low = 1, - }, - { -- .name = "qca:red:wlan-2g", -+ .name = "ap136:red:wlan-2g", - .gpio = AP136_GPIO_LED_WLAN_2G, - .active_low = 1, - }, - { -- .name = "qca:red:usb", -+ .name = "ap136:red:usb", - .gpio = AP136_GPIO_LED_USB, - .active_low = 1, - } -@@ -98,59 +106,151 @@ static struct gpio_keys_button ap136_gpi - }, - }; - --static struct spi_board_info ap136_spi_info[] = { -- { -- .bus_num = 0, -- .chip_select = 0, -- .max_speed_hz = 25000000, -- .modalias = "mx25l6405d", -- } -+static struct ar8327_pad_cfg ap136_ar8327_pad0_cfg; -+static struct ar8327_pad_cfg ap136_ar8327_pad6_cfg; -+ -+static struct ar8327_platform_data ap136_ar8327_data = { -+ .pad0_cfg = &ap136_ar8327_pad0_cfg, -+ .pad6_cfg = &ap136_ar8327_pad6_cfg, -+ .port0_cfg = { -+ .force_link = 1, -+ .speed = AR8327_PORT_SPEED_1000, -+ .duplex = 1, -+ .txpause = 1, -+ .rxpause = 1, -+ }, -+ .port6_cfg = { -+ .force_link = 1, -+ .speed = AR8327_PORT_SPEED_1000, -+ .duplex = 1, -+ .txpause = 1, -+ .rxpause = 1, -+ }, - }; - --static struct ath79_spi_platform_data ap136_spi_data = { -- .bus_num = 0, -- .num_chipselect = 1, -+static struct mdio_board_info ap136_mdio0_info[] = { -+ { -+ .bus_id = "ag71xx-mdio.0", -+ .phy_addr = 0, -+ .platform_data = &ap136_ar8327_data, -+ }, - }; - --#ifdef CONFIG_PCI --static struct ath9k_platform_data ap136_ath9k_data; -+static void __init ap136_common_setup(void) -+{ -+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); -+ -+ ath79_register_m25p80(NULL); -+ -+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ap136_leds_gpio), -+ ap136_leds_gpio); -+ ath79_register_gpio_keys_polled(-1, AP136_KEYS_POLL_INTERVAL, -+ ARRAY_SIZE(ap136_gpio_keys), -+ ap136_gpio_keys); -+ -+ ath79_register_usb(); -+ ath79_register_nfc(); -+ -+ ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET, NULL); -+ -+ ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN); - --static int ap136_pci_plat_dev_init(struct pci_dev *dev) -+ ath79_register_mdio(0, 0x0); -+ ath79_init_mac(ath79_eth0_data.mac_addr, art + AP136_MAC0_OFFSET, 0); -+ -+ mdiobus_register_board_info(ap136_mdio0_info, -+ ARRAY_SIZE(ap136_mdio0_info)); -+ -+ /* GMAC0 is connected to the RMGII interface */ -+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; -+ ath79_eth0_data.phy_mask = BIT(0); -+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; -+ -+ ath79_register_eth(0); -+ -+ /* GMAC1 is connected tot eh SGMII interface */ -+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; -+ ath79_eth1_data.speed = SPEED_1000; -+ ath79_eth1_data.duplex = DUPLEX_FULL; -+ -+ ath79_register_eth(1); -+} -+ -+static void __init ap136_010_setup(void) - { -- if (dev->bus->number == 1 && (PCI_SLOT(dev->devfn)) == 0) -- dev->dev.platform_data = &ap136_ath9k_data; -+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - -- return 0; -+ /* GMAC0 of the AR8327 switch is connected to GMAC0 via RGMII */ -+ ap136_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_RGMII; -+ ap136_ar8327_pad0_cfg.txclk_delay_en = true; -+ ap136_ar8327_pad0_cfg.rxclk_delay_en = true; -+ ap136_ar8327_pad0_cfg.txclk_delay_sel = AR8327_CLK_DELAY_SEL1; -+ ap136_ar8327_pad0_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2; -+ -+ /* GMAC6 of the AR8327 switch is connected to GMAC1 via SGMII */ -+ ap136_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_SGMII; -+ ap136_ar8327_pad6_cfg.rxclk_delay_en = true; -+ ap136_ar8327_pad6_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL0; -+ -+ ath79_eth0_pll_data.pll_1000 = 0xa6000000; -+ ath79_eth1_pll_data.pll_1000 = 0x03000101; -+ -+ ap136_common_setup(); -+ ap91_pci_init(art + AP136_PCIE_CALDATA_OFFSET, NULL); - } - --static void __init ap136_pci_init(u8 *eeprom) -+MIPS_MACHINE(ATH79_MACH_AP136_010, "AP136-010", -+ "Atheros AP136-010 reference board", -+ ap136_010_setup); -+ -+static void __init ap136_020_common_setup(void) - { -- memcpy(ap136_ath9k_data.eeprom_data, eeprom, -- sizeof(ap136_ath9k_data.eeprom_data)); -+ /* GMAC0 of the AR8327 switch is connected to GMAC1 via SGMII */ -+ ap136_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_SGMII; -+ ap136_ar8327_pad0_cfg.sgmii_delay_en = true; -+ -+ /* GMAC6 of the AR8327 switch is connected to GMAC0 via RGMII */ -+ ap136_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_RGMII; -+ ap136_ar8327_pad6_cfg.txclk_delay_en = true; -+ ap136_ar8327_pad6_cfg.rxclk_delay_en = true; -+ ap136_ar8327_pad6_cfg.txclk_delay_sel = AR8327_CLK_DELAY_SEL1; -+ ap136_ar8327_pad6_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2; - -- ath79_pci_set_plat_dev_init(ap136_pci_plat_dev_init); -- ath79_register_pci(); -+ ath79_eth0_pll_data.pll_1000 = 0x56000000; -+ ath79_eth1_pll_data.pll_1000 = 0x03000101; -+ -+ ap136_common_setup(); - } --#else --static inline void ap136_pci_init(u8 *eeprom) {} --#endif /* CONFIG_PCI */ - --static void __init ap136_setup(void) -+static void __init ap136_020_setup(void) - { - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - -- ath79_register_leds_gpio(-1, ARRAY_SIZE(ap136_leds_gpio), -- ap136_leds_gpio); -- ath79_register_gpio_keys_polled(-1, AP136_KEYS_POLL_INTERVAL, -- ARRAY_SIZE(ap136_gpio_keys), -- ap136_gpio_keys); -- ath79_register_spi(&ap136_spi_data, ap136_spi_info, -- ARRAY_SIZE(ap136_spi_info)); -- ath79_register_usb(); -- ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET); -- ap136_pci_init(art + AP136_PCIE_CALDATA_OFFSET); -+ ap136_020_common_setup(); -+ ap91_pci_init(art + AP136_PCIE_CALDATA_OFFSET, NULL); - } - --MIPS_MACHINE(ATH79_MACH_AP136_010, "AP136-010", -- "Atheros AP136-010 reference board", -- ap136_setup); -+MIPS_MACHINE(ATH79_MACH_AP136_020, "AP136-020", -+ "Atheros AP136-020 reference board", -+ ap136_020_setup); -+ -+/* -+ * AP135-020 is similar to AP136-020, any future AP135 specific init -+ * code can be added here. -+ */ -+static void __init ap135_020_setup(void) -+{ -+ ap136_leds_gpio[0].name = "ap135:green:status"; -+ ap136_leds_gpio[1].name = "ap135:red:status"; -+ ap136_leds_gpio[2].name = "ap135:green:wps"; -+ ap136_leds_gpio[3].name = "ap135:red:wps"; -+ ap136_leds_gpio[4].name = "ap135:red:wlan-2g"; -+ ap136_leds_gpio[5].name = "ap135:red:usb"; -+ -+ ap136_020_common_setup(); -+ ath79_register_pci(); -+} -+ -+MIPS_MACHINE(ATH79_MACH_AP135_020, "AP135-020", -+ "Atheros AP135-020 reference board", -+ ap135_020_setup); ---- a/arch/mips/ath79/machtypes.h -+++ b/arch/mips/ath79/machtypes.h -@@ -18,7 +18,9 @@ enum ath79_mach_type { - ATH79_MACH_GENERIC = 0, - ATH79_MACH_AP121, /* Atheros AP121 reference board */ - ATH79_MACH_AP121_MINI, /* Atheros AP121-MINI reference board */ -+ ATH79_MACH_AP135_020, /* Atheros AP135-020 reference board */ - ATH79_MACH_AP136_010, /* Atheros AP136-010 reference board */ -+ ATH79_MACH_AP136_020, /* Atheros AP136-020 reference board */ - ATH79_MACH_AP81, /* Atheros AP81 reference board */ - ATH79_MACH_DB120, /* Atheros DB120 reference board */ - ATH79_MACH_PB44, /* Atheros PB44 reference board */ ---- a/arch/mips/ath79/Kconfig -+++ b/arch/mips/ath79/Kconfig -@@ -16,16 +16,17 @@ config ATH79_MACH_AP121 - Atheros AP121 reference board. - - config ATH79_MACH_AP136 -- bool "Atheros AP136 reference board" -+ bool "Atheros AP136/AP135 reference board" - select SOC_QCA955X - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_NFC - select ATH79_DEV_SPI - select ATH79_DEV_USB - select ATH79_DEV_WMAC - help - Say 'Y' here if you want your kernel to support the -- Atheros AP136 reference board. -+ Atheros AP136 or AP135 reference boards. - - config ATH79_MACH_AP81 - bool "Atheros AP81 reference board" -- cgit v1.2.3