From ca7f6d28c8f811a1aa851554253304157f44256b Mon Sep 17 00:00:00 2001
From: Jonas Gorski <jogo@openwrt.org>
Date: Mon, 16 Mar 2015 11:52:10 +0000
Subject: brcm63xx: Add DGND3700 v1 / DGND3800B support

This adds support for the Netgear DGND3700 v1 and DGND3800B.

DGND3700 v1 and DGND3800B are exactly the same router, only one difference,
the factory firmware. This patch produces two factory firmwares for each router.

The router includes an onboard NAND flash for extra storage. NAND is currently
not supported in bcm63xx, so no code added for this part. The NOR flash (32MB)
is enough for storing an openwrt firmware.

Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
[jogo: Add back commit message from v1]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44831
---
 target/linux/brcm63xx/dts/dgnd3700v1.dts | 110 +++++++++++++++++++++++++++++++
 1 file changed, 110 insertions(+)
 create mode 100644 target/linux/brcm63xx/dts/dgnd3700v1.dts

(limited to 'target/linux/brcm63xx/dts')

diff --git a/target/linux/brcm63xx/dts/dgnd3700v1.dts b/target/linux/brcm63xx/dts/dgnd3700v1.dts
new file mode 100644
index 0000000000..b349576239
--- /dev/null
+++ b/target/linux/brcm63xx/dts/dgnd3700v1.dts
@@ -0,0 +1,110 @@
+/dts-v1/;
+
+/include/ "bcm6368.dtsi"
+
+/ {
+	model = "Netgear DGND3700v1/DGND3800B";
+	compatible = "netgear,dgnd3700v1", "brcm,bcm6368";
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+		debounce-interval = <60>;
+
+		wlan {
+			label = "wlan";
+			gpios = <&gpio0 10 1>;
+			linux,code = <0xee>;
+		};
+		reset {
+			label = "reset";
+			gpios = <&gpio0 12 1>;
+			linux,code = <0x198>;
+		};
+		wps {
+			label = "wps";
+			gpios = <&gpio1 3 1>;
+			linux,code = <0x211>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		dsl_green {
+			label = "DGND3700v1_3800B:green:dsl";
+			gpios = <&gpio0 2 1>;
+		};
+		inet_red {
+			label = "DGND3700v1_3800B:red:inet";
+			gpios = <&gpio0 4 1>;
+		};
+		inet_green {
+			label = "DGND3700v1_3800B:green:inet";
+			gpios = <&gpio0 5 1>;
+		};
+		wps_green {
+			label = "DGND3700v1_3800B:green:wps";
+			gpios = <&gpio0 11 1>;
+		};
+		usbfront_green {
+			label = "DGND3700v1_3800B:green:usb-front";
+			gpios = <&gpio0 13 1>;
+		};
+		usbback_green {
+			label = "DGND3700v1_3800B:green:usb-back";
+			gpios = <&gpio0 14 1>;
+		};
+		power_red {
+			label = "DGND3700v1_3800B:red:power";
+			gpios = <&gpio0 22 1>;
+		};
+		lan_green {
+			label = "DGND3700v1_3800B:green:lan";
+			gpios = <&gpio0 23 1>;
+		};
+		power_green {
+			label = "DGND3700v1_3800B:green:power";
+			gpios = <&gpio0 24 1>;
+			default-state = "on";
+		};
+		wifi2g_green {
+			label = "DGND3700v1_3800B:green:wifi2g";
+			gpios = <&gpio0 26 1>;
+		};
+		wifi5g_blue {
+			label = "DGND3700v1_3800B:blue:wifi5g";
+			gpios = <&gpio0 27 1>;
+		};
+	};
+};
+
+&pflash {
+	status = "ok";
+
+	linux,part-probe = "bcm63xxpart";
+
+	cfe@0 {
+		label = "CFE";
+		reg = <0x000000 0x020000>;
+		read-only;
+	};
+
+	linux@20000 {
+		label = "linux";
+		reg = <0x020000 0x1e20000>;
+	};
+
+	board_data@1e40000 {
+		label = "board_data";
+		reg = <0x1e40000 0x1a0000>;
+		read-only;
+	};
+
+	nvram@1fe0000 {
+		label = "nvram";
+		reg = <0x1fe0000 0x20000>;
+	};
+};
-- 
cgit v1.2.3