From 387fd3ca26d53ac806a38c4e951aa7e31d2ef0e7 Mon Sep 17 00:00:00 2001
From: Jonas Gorski <jogo@openwrt.org>
Date: Mon, 1 Dec 2014 13:27:26 +0000
Subject: brcm63xx: add kernel 3.18 support

Add 3.18 support based on 3.18-rc6. Only netboot tested.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43461
---
 .../patches-3.18/560-board_963268gu_p300.patch     | 142 +++++++++++++++++++++
 1 file changed, 142 insertions(+)
 create mode 100644 target/linux/brcm63xx/patches-3.18/560-board_963268gu_p300.patch

(limited to 'target/linux/brcm63xx/patches-3.18/560-board_963268gu_p300.patch')

diff --git a/target/linux/brcm63xx/patches-3.18/560-board_963268gu_p300.patch b/target/linux/brcm63xx/patches-3.18/560-board_963268gu_p300.patch
new file mode 100644
index 0000000000..026d19519b
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.18/560-board_963268gu_p300.patch
@@ -0,0 +1,142 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -4149,6 +4149,131 @@ static struct board_info __initdata boar
+  * known 63268/63269 boards
+  */
+ #ifdef CONFIG_BCM63XX_CPU_63268
++static struct board_info __initdata board_963268bu_p300 = {
++	.name				= "963268BU_P300",
++	.expected_cpu_id		= 0x63268,
++
++	.has_uart0			= 1,
++
++	.has_ehci0			= 1,
++	.has_ohci0			= 1,
++	.num_usbh_ports			= 1,
++
++	.has_usbd			= 1,
++
++	.usbd = {
++		.use_fullspeed		= 0,
++		.port_no		= 0,
++	},
++
++	.has_enetsw			= 1,
++
++	.enetsw = {
++		.used_ports = {
++			[0] = {
++				.used	= 1,
++				.phy_id	= 17,
++				.name	= "FE1",
++			},
++
++			[3] = {
++				.used	= 1,
++				.phy_id	= 4,
++				.name	= "GbE2",
++			},
++
++			[4] = {
++				.used	= 1,
++				.phy_id	= 0,
++				.name	= "GbE3",
++			},
++
++			[5] = {
++				.used	= 1,
++				.phy_id	= 1,
++				.name	= "GbE1",
++			},
++
++			[6] = {
++				.used	= 1,
++				.phy_id	= 24,
++				.name	= "GbE4",
++			},
++
++			[7] = {
++				.used	= 1,
++				.phy_id	= 25,
++				.name	= "GbE5",
++			},
++		},
++	},
++
++	.leds = {
++		{
++			.name		= "963268BU_P300:green:power",
++			.gpio		= 20,
++			.active_low	= 1,
++		},
++		{
++			.name		= "963268BU_P300:red:power",
++			.gpio		= 21,
++			.active_low	= 1,
++		},
++		{
++			.name		= "963268BU_P300:green:internet",
++			.gpio		= 8,
++			.active_low	= 1,
++		},
++		{
++			.name		= "963268BU_P300:red:internet",
++			.gpio		= 2,
++			.active_low	= 1,
++		},
++		{
++			.name		= "963268BU_P300:green:adsl",
++			.gpio		= 3,
++			.active_low	= 1,
++		},
++		{
++			.name		= "963268BU_P300:green:wps",
++			.gpio		= 7,
++			.active_low	= 1,
++		},
++		{
++			.name		= "963268BU_P300:green:voip1",
++			.gpio		= 4,
++			.active_low	= 1,
++		},
++		{
++			.name		= "963268BU_P300:green:voip2",
++			.gpio		= 5,
++			.active_low	= 1,
++		},
++		{
++			.name		= "963268BU_P300:green:pots",
++			.gpio		= 6,
++			.active_low	= 1,
++		},
++	},
++
++	.buttons = {
++		{
++			.desc		= "reset",
++			.gpio		= 32,
++			.type		= EV_KEY,
++			.code		= KEY_RESTART,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++		{
++			.desc		= "wps",
++			.gpio		= 33,
++			.type		= EV_KEY,
++			.code		= KEY_WPS_BUTTON,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++	},
++};
++
+ static struct board_info __initdata board_963269bhr = {
+ 	.name				= "963269BHR",
+ 	.expected_cpu_id		= 0x63268,
+@@ -4399,6 +4524,7 @@ static const struct board_info __initcon
+ 	&board_96368mvngr,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_63268
++	&board_963268bu_p300,
+ 	&board_963269bhr,
+ 	&board_vw6339gu,
+ #endif
-- 
cgit v1.2.3