From 3a313a3e11adc1d44a8c7108ffb158f1ab1304d5 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sat, 24 Jan 2015 19:42:06 +0000 Subject: ar8216: add swconfig attribute to display ARL table on AR8327/AR8337 Add global read-only swconfig attribute "arl_table" to display the address resolution table. So far the chip-specific part is implemented for AR8327/AR8337 only as I don't have the datasheets for the other AR8XXX chips. Successfully tested on TL-WDR4300 (AR8327rev2) and TL-WDR4900 (AR8327rev4). Signed-off-by: Heiner Kallweit SVN-Revision: 44104 --- target/linux/generic/files/drivers/net/phy/ar8327.h | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'target/linux/generic/files/drivers/net/phy/ar8327.h') diff --git a/target/linux/generic/files/drivers/net/phy/ar8327.h b/target/linux/generic/files/drivers/net/phy/ar8327.h index f0ef013cb6..29eeb6271d 100644 --- a/target/linux/generic/files/drivers/net/phy/ar8327.h +++ b/target/linux/generic/files/drivers/net/phy/ar8327.h @@ -114,8 +114,29 @@ #define AR8327_PORT_VLAN1_OUT_MODE_UNTOUCH 3 #define AR8327_REG_ATU_DATA0 0x600 +#define AR8327_ATU_ADDR0 BITS(0, 8) +#define AR8327_ATU_ADDR0_S 0 +#define AR8327_ATU_ADDR1 BITS(8, 8) +#define AR8327_ATU_ADDR1_S 8 +#define AR8327_ATU_ADDR2 BITS(16, 8) +#define AR8327_ATU_ADDR2_S 16 +#define AR8327_ATU_ADDR3 BITS(24, 8) +#define AR8327_ATU_ADDR3_S 24 #define AR8327_REG_ATU_DATA1 0x604 +#define AR8327_ATU_ADDR4 BITS(0, 8) +#define AR8327_ATU_ADDR4_S 0 +#define AR8327_ATU_ADDR5 BITS(8, 8) +#define AR8327_ATU_ADDR5_S 8 +#define AR8327_ATU_PORTS BITS(16, 7) +#define AR8327_ATU_PORT0 BIT(16) +#define AR8327_ATU_PORT1 BIT(17) +#define AR8327_ATU_PORT2 BIT(18) +#define AR8327_ATU_PORT3 BIT(19) +#define AR8327_ATU_PORT4 BIT(20) +#define AR8327_ATU_PORT5 BIT(21) +#define AR8327_ATU_PORT6 BIT(22) #define AR8327_REG_ATU_DATA2 0x608 +#define AR8327_ATU_STATUS BITS(0, 4) #define AR8327_REG_ATU_FUNC 0x60c #define AR8327_ATU_FUNC_OP BITS(0, 4) -- cgit v1.2.3