From b7fc892eb56b52d25bc00578af9d1ee058dcf6b3 Mon Sep 17 00:00:00 2001 From: blogic Date: Mon, 2 May 2016 18:50:18 +0000 Subject: lantiq: move partitions into partion table node Starting with kernel 4.4, the use of partitions as direct subnodes of the mtd device is discouraged and only supported for backward compatiblity reasons. Signed-off-by: Mathias Kresin SVN-Revision: 49280 --- target/linux/lantiq/dts/BTHOMEHUBV5A.dts | 48 ++++++++++++++++++-------------- 1 file changed, 27 insertions(+), 21 deletions(-) (limited to 'target/linux/lantiq/dts/BTHOMEHUBV5A.dts') diff --git a/target/linux/lantiq/dts/BTHOMEHUBV5A.dts b/target/linux/lantiq/dts/BTHOMEHUBV5A.dts index 9283f62365..e62a18d9dc 100644 --- a/target/linux/lantiq/dts/BTHOMEHUBV5A.dts +++ b/target/linux/lantiq/dts/BTHOMEHUBV5A.dts @@ -32,27 +32,33 @@ #address-cells = <1>; #size-cells = <1>; - partition@0 { - label = "u-boot"; - reg = <0x0 0x40000>; - read-only; - }; - partition@40000 { - label = "uboot-env"; - reg = <0x40000 0x40000>; - }; - caldata: partition@80000 { - label = "caldata"; - reg = <0x80000 0x20000>; - read-only; - }; - partition@a0000 { - label = "kernel"; - reg = <0xa0000 0x200000>; - }; - partition@2a0000 { - label = "ubi"; - reg = <0x2a0000 0x7d60000>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x40000>; + read-only; + }; + partition@40000 { + label = "uboot-env"; + reg = <0x40000 0x40000>; + }; + caldata: partition@80000 { + label = "caldata"; + reg = <0x80000 0x20000>; + read-only; + }; + partition@a0000 { + label = "kernel"; + reg = <0xa0000 0x200000>; + }; + partition@2a0000 { + label = "ubi"; + reg = <0x2a0000 0x7d60000>; + }; }; }; }; -- cgit v1.2.3