From 58eccdac4fb6b384dde8723876e69dafb8bf2368 Mon Sep 17 00:00:00 2001
From: John Crispin <john@openwrt.org>
Date: Thu, 3 Apr 2014 14:26:24 +0000
Subject: lantiq: fix vr9 ubi handling

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40364
---
 target/linux/lantiq/dts/FRITZ3370.dts | 31 +++++++++++++++----------------
 1 file changed, 15 insertions(+), 16 deletions(-)

(limited to 'target/linux/lantiq/dts')

diff --git a/target/linux/lantiq/dts/FRITZ3370.dts b/target/linux/lantiq/dts/FRITZ3370.dts
index 0017ddedf1..c0202bab0f 100644
--- a/target/linux/lantiq/dts/FRITZ3370.dts
+++ b/target/linux/lantiq/dts/FRITZ3370.dts
@@ -6,7 +6,7 @@
 	model = "FRITZ3370 - Fritz!Box WLAN 3370";
 
 	chosen {
-		bootargs = "console=ttyLTQ0,115200";
+		bootargs = "console=ttyLTQ0,115200 ubi.mtd=1,512 root=/dev/mtdblock9";
 	};
 
 	memory@0 {
@@ -23,8 +23,13 @@
 				#size-cells = <1>;
 
 				partition@0 {
-					label = "firmware";
-					reg = <0x00000 0x3400000>;
+					label = "kernel";
+					reg = <0x0 0x400000>;
+				};
+
+				partition@400000 {
+					label = "rootfs_ubi";
+					reg = <0x400000 0x3000000>;
 				};
 
 				partition@3400000 {
@@ -55,23 +60,16 @@
 					lantiq,groups = "spi", "spi_cs4";
 					lantiq,function = "gpio";
 				};
-				nand_out {
-					lantiq,groups = "nand cle", "nand ale",	"nand rd", "ebu a23", "ebu a24";
-					lantiq,function = "ebu";
-					lantiq,direction = <1>;
-					lantiq,pull = <0>;
-				};
-				nand_in {
-					lantiq,groups = "nand rdy";
-					lantiq,function = "ebu";
-					lantiq,direction = <0>;
-					lantiq,open-drain = <1>;
-					lantiq,pull = <2>;
-				};
 				mdio {
 					lantiq,groups = "mdio";
 					lantiq,function = "mdio";
 				};
+				nand {
+					lantiq,groups = "nand cle", "nand ale",
+							"nand rd", "nand cs1", "nand rdy";
+					lantiq,function = "ebu";
+					lantiq,pull = <1>;
+				};
 				phy-rst {
 					lantiq,pins = "io37", "io44";
 					lantiq,pull = <0>;
@@ -104,6 +102,7 @@
 				#size-cells = <0>;
 				reg = <0>;
 				mac-address = [ 00 11 22 33 44 55 ];
+				lantiq,switch;
 
 				ethernet@0 {
 					compatible = "lantiq,xrx200-pdi-port";
-- 
cgit v1.2.3