From 30786d2dd0e0063b56ba5e616e868f4e6775eaad Mon Sep 17 00:00:00 2001
From: John Crispin <john@openwrt.org>
Date: Mon, 10 Jun 2013 08:24:50 +0000
Subject: ramips: add support for belkin F7C027 wemo/homeautomatisation plug

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 36897
---
 target/linux/ramips/dts/F7C027.dts | 126 +++++++++++++++++++++++++++++++++++++
 1 file changed, 126 insertions(+)
 create mode 100644 target/linux/ramips/dts/F7C027.dts

(limited to 'target/linux/ramips/dts/F7C027.dts')

diff --git a/target/linux/ramips/dts/F7C027.dts b/target/linux/ramips/dts/F7C027.dts
new file mode 100644
index 0000000000..91d4383812
--- /dev/null
+++ b/target/linux/ramips/dts/F7C027.dts
@@ -0,0 +1,126 @@
+/dts-v1/;
+
+/include/ "rt5350.dtsi"
+
+/ {
+	compatible = "F7C027", "ralink,rt5350-soc";
+	model = "Belkin F7C027";
+
+	palmbus@10000000 {
+		sysc@0 {
+			ralink,pinmux = "spi", "uartlite", "jtag", "sdram";
+			ralink,uartmux = "gpio";
+			ralink,wdtmux = <1>;
+		};
+
+		gpio0: gpio@600 {
+			status = "okay";
+		};
+
+		spi@b00 {
+			status = "okay";
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "mx25l12805d";
+				reg = <0 0>;
+				linux,modalias = "m25p80", "mx25l12805d";
+				spi-max-frequency = <10000000>;
+
+				partition@0 {
+					label = "u-boot";
+					reg = <0x0 0x30000>;
+					read-only;
+				};
+
+				partition@30000 {
+					label = "u-boot-env";
+					reg = <0x30000 0x10000>;
+					read-only;
+				};
+
+				factory: partition@40000 {
+					label = "factory";
+					reg = <0x40000 0x10000>;
+					read-only;
+				};
+
+				partition@50000 {
+					label = "firmware";
+					reg = <0x50000 0x770000>;
+				};
+
+				partition@7c0000 {
+					label = "firmware2";
+					reg = <0x7c0000 0x770000>;
+				};
+
+				partition@f30000 {
+					label = "belkin_settings";
+					reg = <0xf30000 0xa0000>;
+				};
+
+				partition@fd0000 {
+					label = "unknown";
+					reg = <0xfd0000 0x10000>;
+				};
+
+				partition@fe0000 {
+					label = "nvram";
+					reg = <0xfe0000 0x10000>;
+				};
+
+				partition@ff0000 {
+					label = "user_factory";
+					reg = <0xff0000 0x10000>;
+				};
+			};
+		};
+	};
+
+
+	wmac@10180000 {
+		status = "okay";
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		status {
+			label = "belkin:blue:status";
+			gpios = <&gpio0 7 1>;
+		};
+		power {
+			label = "belkin:blue:power";
+			gpios = <&gpio0 9 1>;
+		};
+		orange {
+			label = "belkin:orange:status";
+			gpios = <&gpio0 11 1>;
+		};
+		relay {
+			label = "belkin:device:relay";
+			gpios = <&gpio0 13 0>;
+		};
+	};
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+		top {
+			label = "top";
+			gpios = <&gpio0 10 1>;
+			linux,code = <0x198>;
+		};
+		power {
+			label = "power";
+			gpios = <&gpio0 12 1>;
+			linux,code = <0x100>;
+		};
+		sensor {
+			label = "sensor";
+			gpios = <&gpio0 14 1>;
+			linux,code = <0x101>;
+		};
+	};
+};
-- 
cgit v1.2.3