From 8c1f5141ceee722cdd282f909390b73455968cfd Mon Sep 17 00:00:00 2001 From: John Crispin Date: Tue, 24 Nov 2015 18:29:26 +0000 Subject: ralink: add support for netis WF-2881 netis WF-2881 is an MT7621AT based router with MT7602EN, MT7612EN. It has 128MB DDR3, 128MB SLC NAND FLASH, 5-port Gbps switch and 1x USB 3.0. The following patch adds support for this device. this device only works on top of UBI. Tested and working: * ethernet * both WiFi radios * USB 3.0 * buttons (reset button) * ethernet switch and USB diag LEDs * UART * GPIOs * sysupgrade Tested and not working * failsafe Signed-off-by: YounJae Rho SVN-Revision: 47619 --- target/linux/ramips/image/Makefile | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) (limited to 'target/linux/ramips/image/Makefile') diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index 5a2b98cac6..9521f2cfd0 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -954,7 +954,7 @@ endif # ifeq ($(SUBTARGET),mt7621) - TARGET_DEVICES += mt7621 wsr-600 wsr-1166 dir-860l-b1 firewrt pbr-m1 re6500 sap-g3200u3 zbt-wg2626 + TARGET_DEVICES += mt7621 wsr-600 wsr-1166 dir-860l-b1 firewrt pbr-m1 re6500 sap-g3200u3 zbt-wg2626 wf-2881 endif define Device/mt7621 @@ -1009,6 +1009,15 @@ define Device/zbt-wg2626 IMAGE_SIZE := $(ralink_default_fw_size_16M) endef +define Device/wf-2881 + DTS := WF-2881 + BLOCKSIZE := 128KiB + PAGESIZE := 2048 + KERNEL_SIZE := 2097152 + FILESYSTEMS := squashfs + IMAGE/sysupgrade.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | check-size $$$$(IMAGE_SIZE) +endef + # # MT7628 Profiles # -- cgit v1.2.3