From c2992ee273b4dac36df2a2b4a9d3a74d315f8f2e Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Sun, 12 Jan 2014 18:55:25 +0000 Subject: brcm47xx: add new led and button support Signed-off-by: Hauke Mehrtens SVN-Revision: 39252 --- target/linux/brcm47xx/config-3.10 | 1 + .../100-bcma-gpio-add-own-IRQ-domain.patch | 222 +++++++++ .../101-bcma-gpio-fix-irq-handling.patch | 20 + .../102-ssb-gpio-add-own-IRQ-domain.patch | 450 +++++++++++++++++ ...120-MIPS-BCM47XX-Prepare-support-for-LEDs.patch | 160 +++++++ ...-BCM47XX-Prepare-support-for-GPIO-buttons.patch | 152 ++++++ ...47XX-Import-buttons-database-from-OpenWrt.patch | 497 +++++++++++++++++++ ...BCM47XX-Import-LEDs-database-from-OpenWrt.patch | 532 +++++++++++++++++++++ ...IPS-BCM47XX-Enable-buttons-support-on-SSB.patch | 36 ++ ...PS-BCM47XX-Convert-WNDR4500-to-new-syntax.patch | 118 +++++ ...BCM47XX-Use-timer-trigger-for-status-LEDs.patch | 49 ++ ...X-add-button-and-led-configuration-for-so.patch | 133 ++++++ ...X-add-detection-and-GPIO-config-for-Sieme.patch | 89 ++++ ...CM47XX-add-Belkin-F7Dxxxx-board-detection.patch | 77 +++ .../brcm47xx/patches-3.10/170-fix-74k-cpu.patch | 4 +- ...se-fixed-PHY-device-if-we-do-not-find-any.patch | 14 +- .../brcm47xx/patches-3.10/400-arch-bcm47xx.patch | 2 +- .../patches-3.10/812-disable_wgt634u_crap.patch | 2 +- .../patches-3.10/820-wgt634u-nvram-fix.patch | 2 +- .../patches-3.10/830-huawei_e970_support.patch | 13 +- .../980-wnr834b_no_cardbus_invariant.patch | 2 +- 21 files changed, 2555 insertions(+), 20 deletions(-) create mode 100644 target/linux/brcm47xx/patches-3.10/100-bcma-gpio-add-own-IRQ-domain.patch create mode 100644 target/linux/brcm47xx/patches-3.10/101-bcma-gpio-fix-irq-handling.patch create mode 100644 target/linux/brcm47xx/patches-3.10/102-ssb-gpio-add-own-IRQ-domain.patch create mode 100644 target/linux/brcm47xx/patches-3.10/120-MIPS-BCM47XX-Prepare-support-for-LEDs.patch create mode 100644 target/linux/brcm47xx/patches-3.10/121-MIPS-BCM47XX-Prepare-support-for-GPIO-buttons.patch create mode 100644 target/linux/brcm47xx/patches-3.10/122-MIPS-BCM47XX-Import-buttons-database-from-OpenWrt.patch create mode 100644 target/linux/brcm47xx/patches-3.10/123-MIPS-BCM47XX-Import-LEDs-database-from-OpenWrt.patch create mode 100644 target/linux/brcm47xx/patches-3.10/124-MIPS-BCM47XX-Enable-buttons-support-on-SSB.patch create mode 100644 target/linux/brcm47xx/patches-3.10/125-MIPS-BCM47XX-Convert-WNDR4500-to-new-syntax.patch create mode 100644 target/linux/brcm47xx/patches-3.10/126-MIPS-BCM47XX-Use-timer-trigger-for-status-LEDs.patch create mode 100644 target/linux/brcm47xx/patches-3.10/127-MIPS-BCM47XX-add-button-and-led-configuration-for-so.patch create mode 100644 target/linux/brcm47xx/patches-3.10/128-MIPS-BCM47XX-add-detection-and-GPIO-config-for-Sieme.patch create mode 100644 target/linux/brcm47xx/patches-3.10/129-MIPS-BCM47XX-add-Belkin-F7Dxxxx-board-detection.patch (limited to 'target/linux') diff --git a/target/linux/brcm47xx/config-3.10 b/target/linux/brcm47xx/config-3.10 index c35f872ede..4272dfaee6 100644 --- a/target/linux/brcm47xx/config-3.10 +++ b/target/linux/brcm47xx/config-3.10 @@ -95,6 +95,7 @@ CONFIG_HZ_PERIODIC=y CONFIG_IMAGE_CMDLINE_HACK=y CONFIG_INITRAMFS_SOURCE="" CONFIG_IRQ_CPU=y +CONFIG_IRQ_DOMAIN=y CONFIG_IRQ_FORCED_THREADING=y CONFIG_IRQ_WORK=y CONFIG_MDIO_BOARDINFO=y diff --git a/target/linux/brcm47xx/patches-3.10/100-bcma-gpio-add-own-IRQ-domain.patch b/target/linux/brcm47xx/patches-3.10/100-bcma-gpio-add-own-IRQ-domain.patch new file mode 100644 index 0000000000..b6b370dcad --- /dev/null +++ b/target/linux/brcm47xx/patches-3.10/100-bcma-gpio-add-own-IRQ-domain.patch @@ -0,0 +1,222 @@ +From 37dc57c2400b2998868a5c103756f36b8dc53a17 Mon Sep 17 00:00:00 2001 +From: Rafa? Mi?ecki +Date: Thu, 12 Dec 2013 13:46:03 +0100 +Subject: [PATCH 088/110] bcma: gpio: add own IRQ domain + +Input GPIO changes can generate interrupts, but we need kind of ACK for +them by changing IRQ polarity. This is required to stop hardware from +keep generating interrupts and generate another one on the next GPIO +state change. +This code allows using GPIOs with standard interrupts and add for +example GPIO buttons support. + +Signed-off-by: Rafa? Mi?ecki +Acked-by: Hauke Mehrtens +Acked-by: John Crispin +Patchwork: http://patchwork.linux-mips.org/patch/6216/ +--- + drivers/bcma/Kconfig | 1 + + drivers/bcma/driver_gpio.c | 135 ++++++++++++++++++++++++++- + include/linux/bcma/bcma_driver_chipcommon.h | 1 + + 3 files changed, 134 insertions(+), 3 deletions(-) + +--- a/drivers/bcma/Kconfig ++++ b/drivers/bcma/Kconfig +@@ -76,6 +76,7 @@ config BCMA_DRIVER_GMAC_CMN + config BCMA_DRIVER_GPIO + bool "BCMA GPIO driver" + depends on BCMA && GPIOLIB ++ select IRQ_DOMAIN if BCMA_HOST_SOC + help + Driver to provide access to the GPIO pins of the bcma bus. + +--- a/drivers/bcma/driver_gpio.c ++++ b/drivers/bcma/driver_gpio.c +@@ -9,6 +9,9 @@ + */ + + #include ++#include ++#include ++#include + #include + #include + +@@ -73,19 +76,133 @@ static void bcma_gpio_free(struct gpio_c + bcma_chipco_gpio_pullup(cc, 1 << gpio, 0); + } + ++#if IS_BUILTIN(CONFIG_BCMA_HOST_SOC) + static int bcma_gpio_to_irq(struct gpio_chip *chip, unsigned gpio) + { + struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip); + + if (cc->core->bus->hosttype == BCMA_HOSTTYPE_SOC) +- return bcma_core_irq(cc->core); ++ return irq_find_mapping(cc->irq_domain, gpio); + else + return -EINVAL; + } + ++static void bcma_gpio_irq_unmask(struct irq_data *d) ++{ ++ struct bcma_drv_cc *cc = irq_data_get_irq_chip_data(d); ++ int gpio = irqd_to_hwirq(d); ++ ++ bcma_chipco_gpio_intmask(cc, BIT(gpio), BIT(gpio)); ++} ++ ++static void bcma_gpio_irq_mask(struct irq_data *d) ++{ ++ struct bcma_drv_cc *cc = irq_data_get_irq_chip_data(d); ++ int gpio = irqd_to_hwirq(d); ++ ++ bcma_chipco_gpio_intmask(cc, BIT(gpio), 0); ++} ++ ++static struct irq_chip bcma_gpio_irq_chip = { ++ .name = "BCMA-GPIO", ++ .irq_mask = bcma_gpio_irq_mask, ++ .irq_unmask = bcma_gpio_irq_unmask, ++}; ++ ++static irqreturn_t bcma_gpio_irq_handler(int irq, void *dev_id) ++{ ++ struct bcma_drv_cc *cc = dev_id; ++ u32 val = bcma_cc_read32(cc, BCMA_CC_GPIOIN); ++ u32 mask = bcma_cc_read32(cc, BCMA_CC_GPIOIRQ); ++ u32 pol = bcma_cc_read32(cc, BCMA_CC_GPIOPOL); ++ u32 irqs = (val ^ pol) & mask; ++ int gpio; ++ ++ if (!irqs) ++ return IRQ_NONE; ++ ++ for_each_set_bit(gpio, (unsigned long *)&irqs, cc->gpio.ngpio) ++ generic_handle_irq(bcma_gpio_to_irq(&cc->gpio, gpio)); ++ bcma_chipco_gpio_polarity(cc, irqs, val & irqs); ++ ++ return IRQ_HANDLED; ++} ++ ++static int bcma_gpio_irq_domain_init(struct bcma_drv_cc *cc) ++{ ++ struct gpio_chip *chip = &cc->gpio; ++ int gpio, hwirq, err; ++ ++ if (cc->core->bus->hosttype != BCMA_HOSTTYPE_SOC) ++ return 0; ++ ++ cc->irq_domain = irq_domain_add_linear(NULL, chip->ngpio, ++ &irq_domain_simple_ops, cc); ++ if (!cc->irq_domain) { ++ err = -ENODEV; ++ goto err_irq_domain; ++ } ++ for (gpio = 0; gpio < chip->ngpio; gpio++) { ++ int irq = irq_create_mapping(cc->irq_domain, gpio); ++ ++ irq_set_chip_data(irq, cc); ++ irq_set_chip_and_handler(irq, &bcma_gpio_irq_chip, ++ handle_simple_irq); ++ } ++ ++ hwirq = bcma_core_irq(cc->core); ++ err = request_irq(hwirq, bcma_gpio_irq_handler, IRQF_SHARED, "gpio", ++ cc); ++ if (err) ++ goto err_req_irq; ++ ++ bcma_cc_set32(cc, BCMA_CC_IRQMASK, BCMA_CC_IRQ_GPIO); ++ ++ return 0; ++ ++err_req_irq: ++ for (gpio = 0; gpio < chip->ngpio; gpio++) { ++ int irq = irq_find_mapping(cc->irq_domain, gpio); ++ ++ irq_dispose_mapping(irq); ++ } ++ irq_domain_remove(cc->irq_domain); ++err_irq_domain: ++ return err; ++} ++ ++static void bcma_gpio_irq_domain_exit(struct bcma_drv_cc *cc) ++{ ++ struct gpio_chip *chip = &cc->gpio; ++ int gpio; ++ ++ if (cc->core->bus->hosttype != BCMA_HOSTTYPE_SOC) ++ return; ++ ++ bcma_cc_mask32(cc, BCMA_CC_IRQMASK, ~BCMA_CC_IRQ_GPIO); ++ free_irq(bcma_core_irq(cc->core), cc); ++ for (gpio = 0; gpio < chip->ngpio; gpio++) { ++ int irq = irq_find_mapping(cc->irq_domain, gpio); ++ ++ irq_dispose_mapping(irq); ++ } ++ irq_domain_remove(cc->irq_domain); ++} ++#else ++static int bcma_gpio_irq_domain_init(struct bcma_drv_cc *cc) ++{ ++ return 0; ++} ++ ++static void bcma_gpio_irq_domain_exit(struct bcma_drv_cc *cc) ++{ ++} ++#endif ++ + int bcma_gpio_init(struct bcma_drv_cc *cc) + { + struct gpio_chip *chip = &cc->gpio; ++ int err; + + chip->label = "bcma_gpio"; + chip->owner = THIS_MODULE; +@@ -95,7 +212,8 @@ int bcma_gpio_init(struct bcma_drv_cc *c + chip->set = bcma_gpio_set_value; + chip->direction_input = bcma_gpio_direction_input; + chip->direction_output = bcma_gpio_direction_output; +- chip->to_irq = bcma_gpio_to_irq; ++ if (IS_BUILTIN(CONFIG_BCMA_HOST_SOC)) ++ chip->to_irq = bcma_gpio_to_irq; + chip->ngpio = 16; + /* There is just one SoC in one device and its GPIO addresses should be + * deterministic to address them more easily. The other buses could get +@@ -105,10 +223,21 @@ int bcma_gpio_init(struct bcma_drv_cc *c + else + chip->base = -1; + +- return gpiochip_add(chip); ++ err = bcma_gpio_irq_domain_init(cc); ++ if (err) ++ return err; ++ ++ err = gpiochip_add(chip); ++ if (err) { ++ bcma_gpio_irq_domain_exit(cc); ++ return err; ++ } ++ ++ return 0; + } + + int bcma_gpio_unregister(struct bcma_drv_cc *cc) + { ++ bcma_gpio_irq_domain_exit(cc); + return gpiochip_remove(&cc->gpio); + } +--- a/include/linux/bcma/bcma_driver_chipcommon.h ++++ b/include/linux/bcma/bcma_driver_chipcommon.h +@@ -640,6 +640,7 @@ struct bcma_drv_cc { + spinlock_t gpio_lock; + #ifdef CONFIG_BCMA_DRIVER_GPIO + struct gpio_chip gpio; ++ struct irq_domain *irq_domain; + #endif + }; + diff --git a/target/linux/brcm47xx/patches-3.10/101-bcma-gpio-fix-irq-handling.patch b/target/linux/brcm47xx/patches-3.10/101-bcma-gpio-fix-irq-handling.patch new file mode 100644 index 0000000000..388eefa1f8 --- /dev/null +++ b/target/linux/brcm47xx/patches-3.10/101-bcma-gpio-fix-irq-handling.patch @@ -0,0 +1,20 @@ +--- a/drivers/bcma/driver_gpio.c ++++ b/drivers/bcma/driver_gpio.c +@@ -91,7 +91,9 @@ static void bcma_gpio_irq_unmask(struct + { + struct bcma_drv_cc *cc = irq_data_get_irq_chip_data(d); + int gpio = irqd_to_hwirq(d); ++ u32 val = bcma_chipco_gpio_in(cc, BIT(gpio)); + ++ bcma_chipco_gpio_polarity(cc, BIT(gpio), val); + bcma_chipco_gpio_intmask(cc, BIT(gpio), BIT(gpio)); + } + +@@ -156,6 +158,7 @@ static int bcma_gpio_irq_domain_init(str + if (err) + goto err_req_irq; + ++ bcma_chipco_gpio_intmask(cc, ~0, 0); + bcma_cc_set32(cc, BCMA_CC_IRQMASK, BCMA_CC_IRQ_GPIO); + + return 0; diff --git a/target/linux/brcm47xx/patches-3.10/102-ssb-gpio-add-own-IRQ-domain.patch b/target/linux/brcm47xx/patches-3.10/102-ssb-gpio-add-own-IRQ-domain.patch new file mode 100644 index 0000000000..9d3fe789ad --- /dev/null +++ b/target/linux/brcm47xx/patches-3.10/102-ssb-gpio-add-own-IRQ-domain.patch @@ -0,0 +1,450 @@ +From 5668cb19fea423cb6681f1efa8b130a26be2562e Mon Sep 17 00:00:00 2001 +From: Rafa? Mi?ecki +Date: Fri, 3 Jan 2014 09:55:29 +0100 +Subject: [PATCH] ssb: gpio: add own IRQ domain + +Signed-off-by: Rafa? Mi?ecki +Acked-by: Hauke Mehrtens +--- + drivers/ssb/Kconfig | 1 + + drivers/ssb/driver_gpio.c | 304 ++++++++++++++++++++++++++++++++++++++++++--- + drivers/ssb/main.c | 12 +- + include/linux/ssb/ssb.h | 1 + + 4 files changed, 297 insertions(+), 21 deletions(-) + +--- a/drivers/ssb/Kconfig ++++ b/drivers/ssb/Kconfig +@@ -169,6 +169,7 @@ config SSB_DRIVER_GIGE + config SSB_DRIVER_GPIO + bool "SSB GPIO driver" + depends on SSB && GPIOLIB ++ select IRQ_DOMAIN if SSB_EMBEDDED + help + Driver to provide access to the GPIO pins on the bus. + +--- a/drivers/ssb/driver_gpio.c ++++ b/drivers/ssb/driver_gpio.c +@@ -9,16 +9,40 @@ + */ + + #include ++#include ++#include ++#include + #include + #include + + #include "ssb_private.h" + ++ ++/************************************************** ++ * Shared ++ **************************************************/ ++ + static struct ssb_bus *ssb_gpio_get_bus(struct gpio_chip *chip) + { + return container_of(chip, struct ssb_bus, gpio); + } + ++#if IS_BUILTIN(CONFIG_SSB_EMBEDDED) ++static int ssb_gpio_to_irq(struct gpio_chip *chip, unsigned gpio) ++{ ++ struct ssb_bus *bus = ssb_gpio_get_bus(chip); ++ ++ if (bus->bustype == SSB_BUSTYPE_SSB) ++ return irq_find_mapping(bus->irq_domain, gpio); ++ else ++ return -EINVAL; ++} ++#endif ++ ++/************************************************** ++ * ChipCommon ++ **************************************************/ ++ + static int ssb_gpio_chipco_get_value(struct gpio_chip *chip, unsigned gpio) + { + struct ssb_bus *bus = ssb_gpio_get_bus(chip); +@@ -74,19 +98,129 @@ static void ssb_gpio_chipco_free(struct + ssb_chipco_gpio_pullup(&bus->chipco, 1 << gpio, 0); + } + +-static int ssb_gpio_chipco_to_irq(struct gpio_chip *chip, unsigned gpio) ++#if IS_BUILTIN(CONFIG_SSB_EMBEDDED) ++static void ssb_gpio_irq_chipco_mask(struct irq_data *d) + { +- struct ssb_bus *bus = ssb_gpio_get_bus(chip); ++ struct ssb_bus *bus = irq_data_get_irq_chip_data(d); ++ int gpio = irqd_to_hwirq(d); + +- if (bus->bustype == SSB_BUSTYPE_SSB) +- return ssb_mips_irq(bus->chipco.dev) + 2; +- else +- return -EINVAL; ++ ssb_chipco_gpio_intmask(&bus->chipco, BIT(gpio), 0); ++} ++ ++static void ssb_gpio_irq_chipco_unmask(struct irq_data *d) ++{ ++ struct ssb_bus *bus = irq_data_get_irq_chip_data(d); ++ int gpio = irqd_to_hwirq(d); ++ u32 val = ssb_chipco_gpio_in(&bus->chipco, BIT(gpio)); ++ ++ ssb_chipco_gpio_polarity(&bus->chipco, BIT(gpio), val); ++ ssb_chipco_gpio_intmask(&bus->chipco, BIT(gpio), BIT(gpio)); ++} ++ ++static struct irq_chip ssb_gpio_irq_chipco_chip = { ++ .name = "SSB-GPIO-CC", ++ .irq_mask = ssb_gpio_irq_chipco_mask, ++ .irq_unmask = ssb_gpio_irq_chipco_unmask, ++}; ++ ++static irqreturn_t ssb_gpio_irq_chipco_handler(int irq, void *dev_id) ++{ ++ struct ssb_bus *bus = dev_id; ++ struct ssb_chipcommon *chipco = &bus->chipco; ++ u32 val = chipco_read32(chipco, SSB_CHIPCO_GPIOIN); ++ u32 mask = chipco_read32(chipco, SSB_CHIPCO_GPIOIRQ); ++ u32 pol = chipco_read32(chipco, SSB_CHIPCO_GPIOPOL); ++ u32 irqs = (val ^ pol) & mask; ++ int gpio; ++ ++ if (!irqs) ++ return IRQ_NONE; ++ ++ for_each_set_bit(gpio, (unsigned long *)&irqs, bus->gpio.ngpio) ++ generic_handle_irq(ssb_gpio_to_irq(&bus->gpio, gpio)); ++ ssb_chipco_gpio_polarity(chipco, irqs, val & irqs); ++ ++ return IRQ_HANDLED; ++} ++ ++static int ssb_gpio_irq_chipco_domain_init(struct ssb_bus *bus) ++{ ++ struct ssb_chipcommon *chipco = &bus->chipco; ++ struct gpio_chip *chip = &bus->gpio; ++ int gpio, hwirq, err; ++ ++ if (bus->bustype != SSB_BUSTYPE_SSB) ++ return 0; ++ ++ bus->irq_domain = irq_domain_add_linear(NULL, chip->ngpio, ++ &irq_domain_simple_ops, chipco); ++ if (!bus->irq_domain) { ++ err = -ENODEV; ++ goto err_irq_domain; ++ } ++ for (gpio = 0; gpio < chip->ngpio; gpio++) { ++ int irq = irq_create_mapping(bus->irq_domain, gpio); ++ ++ irq_set_chip_data(irq, bus); ++ irq_set_chip_and_handler(irq, &ssb_gpio_irq_chipco_chip, ++ handle_simple_irq); ++ } ++ ++ hwirq = ssb_mips_irq(bus->chipco.dev) + 2; ++ err = request_irq(hwirq, ssb_gpio_irq_chipco_handler, IRQF_SHARED, ++ "gpio", bus); ++ if (err) ++ goto err_req_irq; ++ ++ ssb_chipco_gpio_intmask(&bus->chipco, ~0, 0); ++ chipco_set32(chipco, SSB_CHIPCO_IRQMASK, SSB_CHIPCO_IRQ_GPIO); ++ ++ return 0; ++ ++err_req_irq: ++ for (gpio = 0; gpio < chip->ngpio; gpio++) { ++ int irq = irq_find_mapping(bus->irq_domain, gpio); ++ ++ irq_dispose_mapping(irq); ++ } ++ irq_domain_remove(bus->irq_domain); ++err_irq_domain: ++ return err; ++} ++ ++static void ssb_gpio_irq_chipco_domain_exit(struct ssb_bus *bus) ++{ ++ struct ssb_chipcommon *chipco = &bus->chipco; ++ struct gpio_chip *chip = &bus->gpio; ++ int gpio; ++ ++ if (bus->bustype != SSB_BUSTYPE_SSB) ++ return; ++ ++ chipco_mask32(chipco, SSB_CHIPCO_IRQMASK, ~SSB_CHIPCO_IRQ_GPIO); ++ free_irq(ssb_mips_irq(bus->chipco.dev) + 2, chipco); ++ for (gpio = 0; gpio < chip->ngpio; gpio++) { ++ int irq = irq_find_mapping(bus->irq_domain, gpio); ++ ++ irq_dispose_mapping(irq); ++ } ++ irq_domain_remove(bus->irq_domain); ++} ++#else ++static int ssb_gpio_irq_chipco_domain_init(struct ssb_bus *bus) ++{ ++ return 0; ++} ++ ++static void ssb_gpio_irq_chipco_domain_exit(struct ssb_bus *bus) ++{ + } ++#endif + + static int ssb_gpio_chipco_init(struct ssb_bus *bus) + { + struct gpio_chip *chip = &bus->gpio; ++ int err; + + chip->label = "ssb_chipco_gpio"; + chip->owner = THIS_MODULE; +@@ -96,7 +230,8 @@ static int ssb_gpio_chipco_init(struct s + chip->set = ssb_gpio_chipco_set_value; + chip->direction_input = ssb_gpio_chipco_direction_input; + chip->direction_output = ssb_gpio_chipco_direction_output; +- chip->to_irq = ssb_gpio_chipco_to_irq; ++ if (IS_BUILTIN(CONFIG_SSB_EMBEDDED)) ++ chip->to_irq = ssb_gpio_to_irq; + chip->ngpio = 16; + /* There is just one SoC in one device and its GPIO addresses should be + * deterministic to address them more easily. The other buses could get +@@ -106,9 +241,23 @@ static int ssb_gpio_chipco_init(struct s + else + chip->base = -1; + +- return gpiochip_add(chip); ++ err = ssb_gpio_irq_chipco_domain_init(bus); ++ if (err) ++ return err; ++ ++ err = gpiochip_add(chip); ++ if (err) { ++ ssb_gpio_irq_chipco_domain_exit(bus); ++ return err; ++ } ++ ++ return 0; + } + ++/************************************************** ++ * EXTIF ++ **************************************************/ ++ + #ifdef CONFIG_SSB_DRIVER_EXTIF + + static int ssb_gpio_extif_get_value(struct gpio_chip *chip, unsigned gpio) +@@ -145,19 +294,127 @@ static int ssb_gpio_extif_direction_outp + return 0; + } + +-static int ssb_gpio_extif_to_irq(struct gpio_chip *chip, unsigned gpio) ++#if IS_BUILTIN(CONFIG_SSB_EMBEDDED) ++static void ssb_gpio_irq_extif_mask(struct irq_data *d) + { +- struct ssb_bus *bus = ssb_gpio_get_bus(chip); ++ struct ssb_bus *bus = irq_data_get_irq_chip_data(d); ++ int gpio = irqd_to_hwirq(d); + +- if (bus->bustype == SSB_BUSTYPE_SSB) +- return ssb_mips_irq(bus->extif.dev) + 2; +- else +- return -EINVAL; ++ ssb_extif_gpio_intmask(&bus->extif, BIT(gpio), 0); + } + ++static void ssb_gpio_irq_extif_unmask(struct irq_data *d) ++{ ++ struct ssb_bus *bus = irq_data_get_irq_chip_data(d); ++ int gpio = irqd_to_hwirq(d); ++ u32 val = ssb_extif_gpio_in(&bus->extif, BIT(gpio)); ++ ++ ssb_extif_gpio_polarity(&bus->extif, BIT(gpio), val); ++ ssb_extif_gpio_intmask(&bus->extif, BIT(gpio), BIT(gpio)); ++} ++ ++static struct irq_chip ssb_gpio_irq_extif_chip = { ++ .name = "SSB-GPIO-EXTIF", ++ .irq_mask = ssb_gpio_irq_extif_mask, ++ .irq_unmask = ssb_gpio_irq_extif_unmask, ++}; ++ ++static irqreturn_t ssb_gpio_irq_extif_handler(int irq, void *dev_id) ++{ ++ struct ssb_bus *bus = dev_id; ++ struct ssb_extif *extif = &bus->extif; ++ u32 val = ssb_read32(extif->dev, SSB_EXTIF_GPIO_IN); ++ u32 mask = ssb_read32(extif->dev, SSB_EXTIF_GPIO_INTMASK); ++ u32 pol = ssb_read32(extif->dev, SSB_EXTIF_GPIO_INTPOL); ++ u32 irqs = (val ^ pol) & mask; ++ int gpio; ++ ++ if (!irqs) ++ return IRQ_NONE; ++ ++ for_each_set_bit(gpio, (unsigned long *)&irqs, bus->gpio.ngpio) ++ generic_handle_irq(ssb_gpio_to_irq(&bus->gpio, gpio)); ++ ssb_extif_gpio_polarity(extif, irqs, val & irqs); ++ ++ return IRQ_HANDLED; ++} ++ ++static int ssb_gpio_irq_extif_domain_init(struct ssb_bus *bus) ++{ ++ struct ssb_extif *extif = &bus->extif; ++ struct gpio_chip *chip = &bus->gpio; ++ int gpio, hwirq, err; ++ ++ if (bus->bustype != SSB_BUSTYPE_SSB) ++ return 0; ++ ++ bus->irq_domain = irq_domain_add_linear(NULL, chip->ngpio, ++ &irq_domain_simple_ops, extif); ++ if (!bus->irq_domain) { ++ err = -ENODEV; ++ goto err_irq_domain; ++ } ++ for (gpio = 0; gpio < chip->ngpio; gpio++) { ++ int irq = irq_create_mapping(bus->irq_domain, gpio); ++ ++ irq_set_chip_data(irq, bus); ++ irq_set_chip_and_handler(irq, &ssb_gpio_irq_extif_chip, ++ handle_simple_irq); ++ } ++ ++ hwirq = ssb_mips_irq(bus->extif.dev) + 2; ++ err = request_irq(hwirq, ssb_gpio_irq_extif_handler, IRQF_SHARED, ++ "gpio", bus); ++ if (err) ++ goto err_req_irq; ++ ++ ssb_extif_gpio_intmask(&bus->extif, ~0, 0); ++ ++ return 0; ++ ++err_req_irq: ++ for (gpio = 0; gpio < chip->ngpio; gpio++) { ++ int irq = irq_find_mapping(bus->irq_domain, gpio); ++ ++ irq_dispose_mapping(irq); ++ } ++ irq_domain_remove(bus->irq_domain); ++err_irq_domain: ++ return err; ++} ++ ++static void ssb_gpio_irq_extif_domain_exit(struct ssb_bus *bus) ++{ ++ struct ssb_extif *extif = &bus->extif; ++ struct gpio_chip *chip = &bus->gpio; ++ int gpio; ++ ++ if (bus->bustype != SSB_BUSTYPE_SSB) ++ return; ++ ++ free_irq(ssb_mips_irq(bus->extif.dev) + 2, extif); ++ for (gpio = 0; gpio < chip->ngpio; gpio++) { ++ int irq = irq_find_mapping(bus->irq_domain, gpio); ++ ++ irq_dispose_mapping(irq); ++ } ++ irq_domain_remove(bus->irq_domain); ++} ++#else ++static int ssb_gpio_irq_extif_domain_init(struct ssb_bus *bus) ++{ ++ return 0; ++} ++ ++static void ssb_gpio_irq_extif_domain_exit(struct ssb_bus *bus) ++{ ++} ++#endif ++ + static int ssb_gpio_extif_init(struct ssb_bus *bus) + { + struct gpio_chip *chip = &bus->gpio; ++ int err; + + chip->label = "ssb_extif_gpio"; + chip->owner = THIS_MODULE; +@@ -165,7 +422,8 @@ static int ssb_gpio_extif_init(struct ss + chip->set = ssb_gpio_extif_set_value; + chip->direction_input = ssb_gpio_extif_direction_input; + chip->direction_output = ssb_gpio_extif_direction_output; +- chip->to_irq = ssb_gpio_extif_to_irq; ++ if (IS_BUILTIN(CONFIG_SSB_EMBEDDED)) ++ chip->to_irq = ssb_gpio_to_irq; + chip->ngpio = 5; + /* There is just one SoC in one device and its GPIO addresses should be + * deterministic to address them more easily. The other buses could get +@@ -175,7 +433,17 @@ static int ssb_gpio_extif_init(struct ss + else + chip->base = -1; + +- return gpiochip_add(chip); ++ err = ssb_gpio_irq_extif_domain_init(bus); ++ if (err) ++ return err; ++ ++ err = gpiochip_add(chip); ++ if (err) { ++ ssb_gpio_irq_extif_domain_exit(bus); ++ return err; ++ } ++ ++ return 0; + } + + #else +@@ -185,6 +453,10 @@ static int ssb_gpio_extif_init(struct ss + } + #endif + ++/************************************************** ++ * Init ++ **************************************************/ ++ + int ssb_gpio_init(struct ssb_bus *bus) + { + if (ssb_chipco_available(&bus->chipco)) +--- a/drivers/ssb/main.c ++++ b/drivers/ssb/main.c +@@ -590,6 +590,13 @@ static int ssb_attach_queued_buses(void) + ssb_pcicore_init(&bus->pcicore); + if (bus->bustype == SSB_BUSTYPE_SSB) + ssb_watchdog_register(bus); ++ ++ err = ssb_gpio_init(bus); ++ if (err == -ENOTSUPP) ++ ssb_dbg("GPIO driver not activated\n"); ++ else if (err) ++ ssb_dbg("Error registering GPIO driver: %i\n", err); ++ + ssb_bus_may_powerdown(bus); + + err = ssb_devices_register(bus); +@@ -827,11 +834,6 @@ static int ssb_bus_register(struct ssb_b + ssb_chipcommon_init(&bus->chipco); + ssb_extif_init(&bus->extif); + ssb_mipscore_init(&bus->mipscore); +- err = ssb_gpio_init(bus); +- if (err == -ENOTSUPP) +- ssb_dbg("GPIO driver not activated\n"); +- else if (err) +- ssb_dbg("Error registering GPIO driver: %i\n", err); + err = ssb_fetch_invariants(bus, get_invariants); + if (err) { + ssb_bus_may_powerdown(bus); +--- a/include/linux/ssb/ssb.h ++++ b/include/linux/ssb/ssb.h +@@ -486,6 +486,7 @@ struct ssb_bus { + #endif /* EMBEDDED */ + #ifdef CONFIG_SSB_DRIVER_GPIO + struct gpio_chip gpio; ++ struct irq_domain *irq_domain; + #endif /* DRIVER_GPIO */ + + /* Internal-only stuff follows. Do not touch. */ diff --git a/target/linux/brcm47xx/patches-3.10/120-MIPS-BCM47XX-Prepare-support-for-LEDs.patch b/target/linux/brcm47xx/patches-3.10/120-MIPS-BCM47XX-Prepare-support-for-LEDs.patch new file mode 100644 index 0000000000..424d1f0a76 --- /dev/null +++ b/target/linux/brcm47xx/patches-3.10/120-MIPS-BCM47XX-Prepare-support-for-LEDs.patch @@ -0,0 +1,160 @@ +From 98e54a60a7346ef31cb851b670a238ad428b58fe Mon Sep 17 00:00:00 2001 +From: Rafa? Mi?ecki +Date: Thu, 2 Jan 2014 13:27:15 +0100 +Subject: [PATCH 029/110] MIPS: BCM47XX: Prepare support for LEDs + +So far this is mostly just a proof of concept, database consists of a +single device. Creating a nice iterateable array wasn't an option +because devices have different amount of LEDs. And we don't want to +waste memory just because of support for a device with dozens on LEDs. + +Signed-off-by: Rafa? Mi?ecki +Acked-by: Hauke Mehrtens +Acked-by: John Crispin +Patchwork: http://patchwork.linux-mips.org/patch/6299/ +--- + arch/mips/bcm47xx/Kconfig | 2 + + arch/mips/bcm47xx/Makefile | 2 +- + arch/mips/bcm47xx/bcm47xx_private.h | 9 +++++ + arch/mips/bcm47xx/leds.c | 73 +++++++++++++++++++++++++++++++++++ + arch/mips/bcm47xx/setup.c | 6 +++ + 5 files changed, 91 insertions(+), 1 deletion(-) + create mode 100644 arch/mips/bcm47xx/bcm47xx_private.h + create mode 100644 arch/mips/bcm47xx/leds.c + +--- a/arch/mips/bcm47xx/Kconfig ++++ b/arch/mips/bcm47xx/Kconfig +@@ -12,6 +12,7 @@ config BCM47XX_SSB + select SSB_PCICORE_HOSTMODE if PCI + select SSB_DRIVER_GPIO + select GPIOLIB ++ select LEDS_GPIO_REGISTER + default y + help + Add support for old Broadcom BCM47xx boards with Sonics Silicon Backplane support. +@@ -29,6 +30,7 @@ config BCM47XX_BCMA + select BCMA_DRIVER_PCI_HOSTMODE if PCI + select BCMA_DRIVER_GPIO + select GPIOLIB ++ select LEDS_GPIO_REGISTER + default y + help + Add support for new Broadcom BCM47xx boards with Broadcom specific Advanced Microcontroller Bus. +--- a/arch/mips/bcm47xx/Makefile ++++ b/arch/mips/bcm47xx/Makefile +@@ -4,5 +4,5 @@ + # + + obj-y += irq.o nvram.o prom.o serial.o setup.o time.o sprom.o +-obj-y += board.o ++obj-y += board.o leds.o + obj-$(CONFIG_BCM47XX_SSB) += wgt634u.o +--- /dev/null ++++ b/arch/mips/bcm47xx/bcm47xx_private.h +@@ -0,0 +1,9 @@ ++#ifndef LINUX_BCM47XX_PRIVATE_H_ ++#define LINUX_BCM47XX_PRIVATE_H_ ++ ++#include ++ ++/* leds.c */ ++void __init bcm47xx_leds_register(void); ++ ++#endif +--- /dev/null ++++ b/arch/mips/bcm47xx/leds.c +@@ -0,0 +1,73 @@ ++#include "bcm47xx_private.h" ++ ++#include ++#include ++ ++static const struct gpio_led ++bcm47xx_leds_netgear_wndr4500_v1_leds[] __initconst = { ++ { ++ .name = "bcm47xx:green:wps", ++ .gpio = 1, ++ .active_low = 1, ++ .default_state = LEDS_GPIO_DEFSTATE_KEEP, ++ }, ++ { ++ .name = "bcm47xx:green:power", ++ .gpio = 2, ++ .active_low = 1, ++ .default_state = LEDS_GPIO_DEFSTATE_KEEP, ++ }, ++ { ++ .name = "bcm47xx:orange:power", ++ .gpio = 3, ++ .active_low = 1, ++ .default_state = LEDS_GPIO_DEFSTATE_KEEP, ++ }, ++ { ++ .name = "bcm47xx:green:usb1", ++ .gpio = 8, ++ .active_low = 1, ++ .default_state = LEDS_GPIO_DEFSTATE_KEEP, ++ }, ++ { ++ .name = "bcm47xx:green:2ghz", ++ .gpio = 9, ++ .active_low = 1, ++ .default_state = LEDS_GPIO_DEFSTATE_KEEP, ++ }, ++ { ++ .name = "bcm47xx:blue:5ghz", ++ .gpio = 11, ++ .active_low = 1, ++ .default_state = LEDS_GPIO_DEFSTATE_KEEP, ++ }, ++ { ++ .name = "bcm47xx:green:usb2", ++ .gpio = 14, ++ .active_low = 1, ++ .default_state = LEDS_GPIO_DEFSTATE_KEEP, ++ }, ++}; ++ ++static struct gpio_led_platform_data bcm47xx_leds_pdata; ++ ++#define bcm47xx_set_pdata(dev_leds) do { \ ++ bcm47xx_leds_pdata.leds = dev_leds; \ ++ bcm47xx_leds_pdata.num_leds = ARRAY_SIZE(dev_leds); \ ++} while (0) ++ ++void __init bcm47xx_leds_register(void) ++{ ++ enum bcm47xx_board board = bcm47xx_board_get(); ++ ++ switch (board) { ++ case BCM47XX_BOARD_NETGEAR_WNDR4500V1: ++ bcm47xx_set_pdata(bcm47xx_leds_netgear_wndr4500_v1_leds); ++ break; ++ default: ++ pr_debug("No LEDs configuration found for this device\n"); ++ return; ++ } ++ ++ gpio_led_register_device(-1, &bcm47xx_leds_pdata); ++} +--- a/arch/mips/bcm47xx/setup.c ++++ b/arch/mips/bcm47xx/setup.c +@@ -26,6 +26,8 @@ + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + ++#include "bcm47xx_private.h" ++ + #include + #include + #include +@@ -243,6 +245,9 @@ static int __init bcm47xx_register_bus_c + break; + #endif + } ++ ++ bcm47xx_leds_register(); ++ + return 0; + } + device_initcall(bcm47xx_register_bus_complete); diff --git a/target/linux/brcm47xx/patches-3.10/121-MIPS-BCM47XX-Prepare-support-for-GPIO-buttons.patch b/target/linux/brcm47xx/patches-3.10/121-MIPS-BCM47XX-Prepare-support-for-GPIO-buttons.patch new file mode 100644 index 0000000000..627ea70b88 --- /dev/null +++ b/target/linux/brcm47xx/patches-3.10/121-MIPS-BCM47XX-Prepare-support-for-GPIO-buttons.patch @@ -0,0 +1,152 @@ +From e352ec3c581df40f159771b30c262c2bc7fb802e Mon Sep 17 00:00:00 2001 +From: Rafa? Mi?ecki +Date: Thu, 2 Jan 2014 13:31:32 +0100 +Subject: [PATCH 030/110] MIPS: BCM47XX: Prepare support for GPIO buttons + +So far this adds support for one Netgear model only, but it's designed +and ready to add many more device. We could hopefully import database +from OpenWrt. +Support for SSB is currently disabled, because SSB doesn't implement IRQ +domain yet. + +Signed-off-by: Rafa? Mi?ecki +Acked-by: Hauke Mehrtens +Acked-by: John Crispin +Patchwork: http://patchwork.linux-mips.org/patch/6300/ +--- + arch/mips/bcm47xx/Makefile | 2 +- + arch/mips/bcm47xx/bcm47xx_private.h | 3 ++ + arch/mips/bcm47xx/buttons.c | 95 +++++++++++++++++++++++++++++++++++ + arch/mips/bcm47xx/setup.c | 1 + + 4 files changed, 100 insertions(+), 1 deletion(-) + create mode 100644 arch/mips/bcm47xx/buttons.c + +--- a/arch/mips/bcm47xx/Makefile ++++ b/arch/mips/bcm47xx/Makefile +@@ -4,5 +4,5 @@ + # + + obj-y += irq.o nvram.o prom.o serial.o setup.o time.o sprom.o +-obj-y += board.o leds.o ++obj-y += board.o buttons.o leds.o + obj-$(CONFIG_BCM47XX_SSB) += wgt634u.o +--- a/arch/mips/bcm47xx/bcm47xx_private.h ++++ b/arch/mips/bcm47xx/bcm47xx_private.h +@@ -3,6 +3,9 @@ + + #include + ++/* buttons.c */ ++int __init bcm47xx_buttons_register(void); ++ + /* leds.c */ + void __init bcm47xx_leds_register(void); + +--- /dev/null ++++ b/arch/mips/bcm47xx/buttons.c +@@ -0,0 +1,95 @@ ++#include "bcm47xx_private.h" ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++/************************************************** ++ * Database ++ **************************************************/ ++ ++static const struct gpio_keys_button ++bcm47xx_buttons_netgear_wndr4500_v1[] __initconst = { ++ { ++ .code = KEY_WPS_BUTTON, ++ .gpio = 4, ++ .active_low = 1, ++ }, ++ { ++ .code = KEY_RFKILL, ++ .gpio = 5, ++ .active_low = 1, ++ }, ++ { ++ .code = KEY_RESTART, ++ .gpio = 6, ++ .active_low = 1, ++ }, ++}; ++ ++/************************************************** ++ * Init ++ **************************************************/ ++ ++static struct gpio_keys_platform_data bcm47xx_button_pdata; ++ ++static struct platform_device bcm47xx_buttons_gpio_keys = { ++ .name = "gpio-keys", ++ .dev = { ++ .platform_data = &bcm47xx_button_pdata, ++ } ++}; ++ ++/* Copy data from __initconst */ ++static int __init bcm47xx_buttons_copy(const struct gpio_keys_button *buttons, ++ size_t nbuttons) ++{ ++ size_t size = nbuttons * sizeof(*buttons); ++ ++ bcm47xx_button_pdata.buttons = kmalloc(size, GFP_KERNEL); ++ if (!bcm47xx_button_pdata.buttons) ++ return -ENOMEM; ++ memcpy(bcm47xx_button_pdata.buttons, buttons, size); ++ bcm47xx_button_pdata.nbuttons = nbuttons; ++ ++ return 0; ++} ++ ++#define bcm47xx_copy_bdata(dev_buttons) \ ++ bcm47xx_buttons_copy(dev_buttons, ARRAY_SIZE(dev_buttons)); ++ ++int __init bcm47xx_buttons_register(void) ++{ ++ enum bcm47xx_board board = bcm47xx_board_get(); ++ int err; ++ ++#ifdef CONFIG_BCM47XX_SSB ++ if (bcm47xx_bus_type == BCM47XX_BUS_TYPE_SSB) { ++ pr_debug("Buttons on SSB are not supported yet.\n"); ++ return -ENOTSUPP; ++ } ++#endif ++ ++ switch (board) { ++ case BCM47XX_BOARD_NETGEAR_WNDR4500V1: ++ err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wndr4500_v1); ++ break; ++ default: ++ pr_debug("No buttons configuration found for this device\n"); ++ return -ENOTSUPP; ++ } ++ ++ if (err) ++ return -ENOMEM; ++ ++ err = platform_device_register(&bcm47xx_buttons_gpio_keys); ++ if (err) { ++ pr_err("Failed to register platform device: %d\n", err); ++ return err; ++ } ++ ++ return 0; ++} +--- a/arch/mips/bcm47xx/setup.c ++++ b/arch/mips/bcm47xx/setup.c +@@ -246,6 +246,7 @@ static int __init bcm47xx_register_bus_c + #endif + } + ++ bcm47xx_buttons_register(); + bcm47xx_leds_register(); + + return 0; diff --git a/target/linux/brcm47xx/patches-3.10/122-MIPS-BCM47XX-Import-buttons-database-from-OpenWrt.patch b/target/linux/brcm47xx/patches-3.10/122-MIPS-BCM47XX-Import-buttons-database-from-OpenWrt.patch new file mode 100644 index 0000000000..e445a0cc14 --- /dev/null +++ b/target/linux/brcm47xx/patches-3.10/122-MIPS-BCM47XX-Import-buttons-database-from-OpenWrt.patch @@ -0,0 +1,497 @@ +From 12dacbcfa86048cc0810fc6b91b3d7329722e59b Mon Sep 17 00:00:00 2001 +From: Rafa? Mi?ecki +Date: Thu, 2 Jan 2014 13:37:56 +0100 +Subject: [PATCH 031/110] MIPS: BCM47XX: Import buttons database from OpenWrt + +This includes all devices from OpenWrt's "diag" that we support in arch +code (we have entries for in enum bcm47xx_board). + +Signed-off-by: Rafa? Mi?ecki +Acked-by: John Crispin +Patchwork: http://patchwork.linux-mips.org/patch/6301/ +--- + arch/mips/bcm47xx/buttons.c | 456 +++++++++++++++++++++++++++++++++++++++++++ + 1 file changed, 456 insertions(+) + +--- a/arch/mips/bcm47xx/buttons.c ++++ b/arch/mips/bcm47xx/buttons.c +@@ -11,6 +11,299 @@ + * Database + **************************************************/ + ++#define BCM47XX_GPIO_KEY(_gpio, _code) \ ++ { \ ++ .code = _code, \ ++ .gpio = _gpio, \ ++ .active_low = 1, \ ++ } ++ ++/* Asus */ ++ ++static const struct gpio_keys_button ++bcm47xx_buttons_asus_rtn12[] __initconst = { ++ BCM47XX_GPIO_KEY(0, KEY_WPS_BUTTON), ++ BCM47XX_GPIO_KEY(1, KEY_RESTART), ++ BCM47XX_GPIO_KEY(4, BTN_0), /* Router mode */ ++ BCM47XX_GPIO_KEY(5, BTN_1), /* Repeater mode */ ++ BCM47XX_GPIO_KEY(6, BTN_2), /* AP mode */ ++}; ++ ++static const struct gpio_keys_button ++bcm47xx_buttons_asus_rtn16[] __initconst = { ++ BCM47XX_GPIO_KEY(6, KEY_WPS_BUTTON), ++ BCM47XX_GPIO_KEY(8, KEY_RESTART), ++}; ++ ++static const struct gpio_keys_button ++bcm47xx_buttons_asus_rtn66u[] __initconst = { ++ BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON), ++ BCM47XX_GPIO_KEY(9, KEY_RESTART), ++}; ++ ++static const struct gpio_keys_button ++bcm47xx_buttons_asus_wl300g[] __initconst = { ++ BCM47XX_GPIO_KEY(6, KEY_RESTART), ++}; ++ ++static const struct gpio_keys_button ++bcm47xx_buttons_asus_wl320ge[] __initconst = { ++ BCM47XX_GPIO_KEY(6, KEY_RESTART), ++}; ++ ++static const struct gpio_keys_button ++bcm47xx_buttons_asus_wl330ge[] __initconst = { ++ BCM47XX_GPIO_KEY(2, KEY_RESTART), ++}; ++ ++static const struct gpio_keys_button ++bcm47xx_buttons_asus_wl500gd[] __initconst = { ++ BCM47XX_GPIO_KEY(6, KEY_RESTART), ++}; ++ ++static const struct gpio_keys_button ++bcm47xx_buttons_asus_wl500gpv1[] __initconst = { ++ BCM47XX_GPIO_KEY(0, KEY_RESTART), ++ BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON), ++}; ++ ++static const struct gpio_keys_button ++bcm47xx_buttons_asus_wl500gpv2[] __initconst = { ++ BCM47XX_GPIO_KEY(2, KEY_RESTART), ++ BCM47XX_GPIO_KEY(3, KEY_WPS_BUTTON), ++}; ++ ++static const struct gpio_keys_button ++bcm47xx_buttons_asus_wl500w[] __initconst = { ++ BCM47XX_GPIO_KEY(6, KEY_RESTART), ++ BCM47XX_GPIO_KEY(7, KEY_WPS_BUTTON), ++}; ++ ++static const struct gpio_keys_button ++bcm47xx_buttons_asus_wl520gc[] __initconst = { ++ BCM47XX_GPIO_KEY(2, KEY_RESTART), ++ BCM47XX_GPIO_KEY(3, KEY_WPS_BUTTON), ++}; ++ ++static const struct gpio_keys_button ++bcm47xx_buttons_asus_wl520gu[] __initconst = { ++ BCM47XX_GPIO_KEY(2, KEY_RESTART), ++ BCM47XX_GPIO_KEY(3, KEY_WPS_BUTTON), ++}; ++ ++static const struct gpio_keys_button ++bcm47xx_buttons_asus_wl700ge[] __initconst = { ++ BCM47XX_GPIO_KEY(0, KEY_POWER), /* Hard disk power switch */ ++ BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON), /* EZSetup */ ++ BCM47XX_GPIO_KEY(6, KEY_COPY), /* Copy data from USB to internal disk */ ++ BCM47XX_GPIO_KEY(7, KEY_RESTART), /* Hard reset */ ++}; ++ ++static const struct gpio_keys_button ++bcm47xx_buttons_asus_wlhdd[] __initconst = { ++ BCM47XX_GPIO_KEY(6, KEY_RESTART), ++}; ++ ++/* Huawei */ ++ ++static const struct gpio_keys_button ++bcm47xx_buttons_huawei_e970[] __initconst = { ++ BCM47XX_GPIO_KEY(6, KEY_RESTART), ++}; ++ ++/* Belkin */ ++ ++static const struct gpio_keys_button ++bcm47xx_buttons_belkin_f7d4301[] __initconst = { ++ BCM47XX_GPIO_KEY(6, KEY_RESTART), ++ BCM47XX_GPIO_KEY(8, KEY_WPS_BUTTON), ++}; ++ ++/* Buffalo */ ++ ++static const struct gpio_keys_button ++bcm47xx_buttons_buffalo_whr2_a54g54[] __initconst = { ++ BCM47XX_GPIO_KEY(4, KEY_RESTART), ++}; ++ ++static const struct gpio_keys_button ++bcm47xx_buttons_buffalo_whr_g125[] __initconst = { ++ BCM47XX_GPIO_KEY(0, KEY_WPS_BUTTON), ++ BCM47XX_GPIO_KEY(4, KEY_RESTART), ++ BCM47XX_GPIO_KEY(5, BTN_0), /* Router / AP mode swtich */ ++}; ++ ++static const struct gpio_keys_button ++bcm47xx_buttons_buffalo_whr_g54s[] __initconst = { ++ BCM47XX_GPIO_KEY(0, KEY_WPS_BUTTON), ++ BCM47XX_GPIO_KEY(4, KEY_RESTART), ++ BCM47XX_GPIO_KEY(5, BTN_0), /* Router / AP mode swtich */ ++}; ++ ++static const struct gpio_keys_button ++bcm47xx_buttons_buffalo_whr_hp_g54[] __initconst = { ++ BCM47XX_GPIO_KEY(0, KEY_WPS_BUTTON), ++ BCM47XX_GPIO_KEY(4, KEY_RESTART), ++ BCM47XX_GPIO_KEY(5, BTN_0), /* Router / AP mode swtich */ ++}; ++ ++static const struct gpio_keys_button ++bcm47xx_buttons_buffalo_wzr_g300n[] __initconst = { ++ BCM47XX_GPIO_KEY(4, KEY_RESTART), ++}; ++ ++static const struct gpio_keys_button ++bcm47xx_buttons_buffalo_wzr_rs_g54[] __initconst = { ++ BCM47XX_GPIO_KEY(0, KEY_WPS_BUTTON), ++ BCM47XX_GPIO_KEY(4, KEY_RESTART), ++}; ++ ++static const struct gpio_keys_button ++bcm47xx_buttons_buffalo_wzr_rs_g54hp[] __initconst = { ++ BCM47XX_GPIO_KEY(0, KEY_WPS_BUTTON), ++ BCM47XX_GPIO_KEY(4, KEY_RESTART), ++}; ++ ++/* Dell */ ++ ++static const struct gpio_keys_button ++bcm47xx_buttons_dell_tm2300[] __initconst = { ++ BCM47XX_GPIO_KEY(0, KEY_RESTART), ++}; ++ ++/* D-Link */ ++ ++static const struct gpio_keys_button ++bcm47xx_buttons_dlink_dir130[] __initconst = { ++ BCM47XX_GPIO_KEY(3, KEY_RESTART), ++ BCM47XX_GPIO_KEY(7, KEY_UNKNOWN), ++}; ++ ++static const struct gpio_keys_button ++bcm47xx_buttons_dlink_dir330[] __initconst = { ++ BCM47XX_GPIO_KEY(3, KEY_RESTART), ++ BCM47XX_GPIO_KEY(7, KEY_UNKNOWN), ++}; ++ ++/* Linksys */ ++ ++static const struct gpio_keys_button ++bcm47xx_buttons_linksys_e1000v1[] __initconst = { ++ BCM47XX_GPIO_KEY(5, KEY_WPS_BUTTON), ++ BCM47XX_GPIO_KEY(6, KEY_RESTART), ++}; ++ ++static const struct gpio_keys_button ++bcm47xx_buttons_linksys_e1000v21[] __initconst = { ++ BCM47XX_GPIO_KEY(9, KEY_WPS_BUTTON), ++ BCM47XX_GPIO_KEY(10, KEY_RESTART), ++}; ++ ++static const struct gpio_keys_button ++bcm47xx_buttons_linksys_e2000v1[] __initconst = { ++ BCM47XX_GPIO_KEY(5, KEY_WPS_BUTTON), ++ BCM47XX_GPIO_KEY(8, KEY_RESTART), ++}; ++ ++static const struct gpio_keys_button ++bcm47xx_buttons_linksys_e3000v1[] __initconst = { ++ BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON), ++ BCM47XX_GPIO_KEY(6, KEY_RESTART), ++}; ++ ++static const struct gpio_keys_button ++bcm47xx_buttons_linksys_e3200v1[] __initconst = { ++ BCM47XX_GPIO_KEY(5, KEY_RESTART), ++ BCM47XX_GPIO_KEY(8, KEY_WPS_BUTTON), ++}; ++ ++static const struct gpio_keys_button ++bcm47xx_buttons_linksys_e4200v1[] __initconst = { ++ BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON), ++ BCM47XX_GPIO_KEY(6, KEY_RESTART), ++}; ++ ++static const struct gpio_keys_button ++bcm47xx_buttons_linksys_wrt150nv1[] __initconst = { ++ BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON), ++ BCM47XX_GPIO_KEY(6, KEY_RESTART), ++}; ++ ++static const struct gpio_keys_button ++bcm47xx_buttons_linksys_wrt150nv11[] __initconst = { ++ BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON), ++ BCM47XX_GPIO_KEY(6, KEY_RESTART), ++}; ++ ++static const struct gpio_keys_button ++bcm47xx_buttons_linksys_wrt160nv1[] __initconst = { ++ BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON), ++ BCM47XX_GPIO_KEY(6, KEY_RESTART), ++}; ++ ++static const struct gpio_keys_button ++bcm47xx_buttons_linksys_wrt160nv3[] __initconst = { ++ BCM47XX_GPIO_KEY(5, KEY_WPS_BUTTON), ++ BCM47XX_GPIO_KEY(6, KEY_RESTART), ++}; ++ ++static const struct gpio_keys_button ++bcm47xx_buttons_linksys_wrt300nv11[] __initconst = { ++ BCM47XX_GPIO_KEY(4, KEY_UNKNOWN), ++ BCM47XX_GPIO_KEY(6, KEY_RESTART), ++}; ++ ++static const struct gpio_keys_button ++bcm47xx_buttons_linksys_wrt310nv1[] __initconst = { ++ BCM47XX_GPIO_KEY(6, KEY_RESTART), ++ BCM47XX_GPIO_KEY(8, KEY_UNKNOWN), ++}; ++ ++static const struct gpio_keys_button ++bcm47xx_buttons_linksys_wrt610nv1[] __initconst = { ++ BCM47XX_GPIO_KEY(6, KEY_RESTART), ++ BCM47XX_GPIO_KEY(8, KEY_WPS_BUTTON), ++}; ++ ++static const struct gpio_keys_button ++bcm47xx_buttons_linksys_wrt610nv2[] __initconst = { ++ BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON), ++ BCM47XX_GPIO_KEY(6, KEY_RESTART), ++}; ++ ++/* Motorola */ ++ ++static const struct gpio_keys_button ++bcm47xx_buttons_motorola_we800g[] __initconst = { ++ BCM47XX_GPIO_KEY(0, KEY_RESTART), ++}; ++ ++static const struct gpio_keys_button ++bcm47xx_buttons_motorola_wr850gp[] __initconst = { ++ BCM47XX_GPIO_KEY(5, KEY_RESTART), ++}; ++ ++static const struct gpio_keys_button ++bcm47xx_buttons_motorola_wr850gv2v3[] __initconst = { ++ BCM47XX_GPIO_KEY(5, KEY_RESTART), ++}; ++ ++/* Netgear */ ++ ++static const struct gpio_keys_button ++bcm47xx_buttons_netgear_wndr3400v1[] __initconst = { ++ BCM47XX_GPIO_KEY(4, KEY_RESTART), ++ BCM47XX_GPIO_KEY(6, KEY_WPS_BUTTON), ++ BCM47XX_GPIO_KEY(8, KEY_RFKILL), ++}; ++ ++static const struct gpio_keys_button ++bcm47xx_buttons_netgear_wndr3700v3[] __initconst = { ++ BCM47XX_GPIO_KEY(2, KEY_RFKILL), ++ BCM47XX_GPIO_KEY(3, KEY_RESTART), ++ BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON), ++}; ++ + static const struct gpio_keys_button + bcm47xx_buttons_netgear_wndr4500_v1[] __initconst = { + { +@@ -30,6 +323,18 @@ bcm47xx_buttons_netgear_wndr4500_v1[] __ + }, + }; + ++static const struct gpio_keys_button ++bcm47xx_buttons_netgear_wnr834bv2[] __initconst = { ++ BCM47XX_GPIO_KEY(6, KEY_RESTART), ++}; ++ ++/* SimpleTech */ ++ ++static const struct gpio_keys_button ++bcm47xx_buttons_simpletech_simpleshare[] __initconst = { ++ BCM47XX_GPIO_KEY(0, KEY_RESTART), ++}; ++ + /************************************************** + * Init + **************************************************/ +@@ -74,9 +379,160 @@ int __init bcm47xx_buttons_register(void + #endif + + switch (board) { ++ case BCM47XX_BOARD_ASUS_RTN12: ++ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_rtn12); ++ break; ++ case BCM47XX_BOARD_ASUS_RTN16: ++ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_rtn16); ++ break; ++ case BCM47XX_BOARD_ASUS_RTN66U: ++ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_rtn66u); ++ break; ++ case BCM47XX_BOARD_ASUS_WL300G: ++ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wl300g); ++ break; ++ case BCM47XX_BOARD_ASUS_WL320GE: ++ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wl320ge); ++ break; ++ case BCM47XX_BOARD_ASUS_WL330GE: ++ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wl330ge); ++ break; ++ case BCM47XX_BOARD_ASUS_WL500GD: ++ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wl500gd); ++ break; ++ case BCM47XX_BOARD_ASUS_WL500GPV1: ++ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wl500gpv1); ++ break; ++ case BCM47XX_BOARD_ASUS_WL500GPV2: ++ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wl500gpv2); ++ break; ++ case BCM47XX_BOARD_ASUS_WL500W: ++ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wl500w); ++ break; ++ case BCM47XX_BOARD_ASUS_WL520GC: ++ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wl520gc); ++ break; ++ case BCM47XX_BOARD_ASUS_WL520GU: ++ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wl520gu); ++ break; ++ case BCM47XX_BOARD_ASUS_WL700GE: ++ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wl700ge); ++ break; ++ case BCM47XX_BOARD_ASUS_WLHDD: ++ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wlhdd); ++ break; ++ ++ case BCM47XX_BOARD_BELKIN_F7D4301: ++ err = bcm47xx_copy_bdata(bcm47xx_buttons_belkin_f7d4301); ++ break; ++ ++ case BCM47XX_BOARD_BUFFALO_WHR2_A54G54: ++ err = bcm47xx_copy_bdata(bcm47xx_buttons_buffalo_whr2_a54g54); ++ break; ++ case BCM47XX_BOARD_BUFFALO_WHR_G125: ++ err = bcm47xx_copy_bdata(bcm47xx_buttons_buffalo_whr_g125); ++ break; ++ case BCM47XX_BOARD_BUFFALO_WHR_G54S: ++ err = bcm47xx_copy_bdata(bcm47xx_buttons_buffalo_whr_g54s); ++ break; ++ case BCM47XX_BOARD_BUFFALO_WHR_HP_G54: ++ err = bcm47xx_copy_bdata(bcm47xx_buttons_buffalo_whr_hp_g54); ++ break; ++ case BCM47XX_BOARD_BUFFALO_WZR_G300N: ++ err = bcm47xx_copy_bdata(bcm47xx_buttons_buffalo_wzr_g300n); ++ break; ++ case BCM47XX_BOARD_BUFFALO_WZR_RS_G54: ++ err = bcm47xx_copy_bdata(bcm47xx_buttons_buffalo_wzr_rs_g54); ++ break; ++ case BCM47XX_BOARD_BUFFALO_WZR_RS_G54HP: ++ err = bcm47xx_copy_bdata(bcm47xx_buttons_buffalo_wzr_rs_g54hp); ++ break; ++ ++ case BCM47XX_BOARD_DELL_TM2300: ++ err = bcm47xx_copy_bdata(bcm47xx_buttons_dell_tm2300); ++ break; ++ ++ case BCM47XX_BOARD_DLINK_DIR130: ++ err = bcm47xx_copy_bdata(bcm47xx_buttons_dlink_dir130); ++ break; ++ case BCM47XX_BOARD_DLINK_DIR330: ++ err = bcm47xx_copy_bdata(bcm47xx_buttons_dlink_dir330); ++ break; ++ ++ case BCM47XX_BOARD_HUAWEI_E970: ++ err = bcm47xx_copy_bdata(bcm47xx_buttons_huawei_e970); ++ break; ++ ++ case BCM47XX_BOARD_LINKSYS_E1000V1: ++ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_e1000v1); ++ break; ++ case BCM47XX_BOARD_LINKSYS_E1000V21: ++ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_e1000v21); ++ break; ++ case BCM47XX_BOARD_LINKSYS_E2000V1: ++ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_e2000v1); ++ break; ++ case BCM47XX_BOARD_LINKSYS_E3000V1: ++ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_e3000v1); ++ break; ++ case BCM47XX_BOARD_LINKSYS_E3200V1: ++ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_e3200v1); ++ break; ++ case BCM47XX_BOARD_LINKSYS_E4200V1: ++ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_e4200v1); ++ break; ++ case BCM47XX_BOARD_LINKSYS_WRT150NV1: ++ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt150nv1); ++ break; ++ case BCM47XX_BOARD_LINKSYS_WRT150NV11: ++ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt150nv11); ++ break; ++ case BCM47XX_BOARD_LINKSYS_WRT160NV1: ++ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt160nv1); ++ break; ++ case BCM47XX_BOARD_LINKSYS_WRT160NV3: ++ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt160nv3); ++ break; ++ case BCM47XX_BOARD_LINKSYS_WRT300NV11: ++ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt300nv11); ++ break; ++ case BCM47XX_BOARD_LINKSYS_WRT310NV1: ++ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt310nv1); ++ break; ++ case BCM47XX_BOARD_LINKSYS_WRT610NV1: ++ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt610nv1); ++ break; ++ case BCM47XX_BOARD_LINKSYS_WRT610NV2: ++ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt610nv2); ++ break; ++ ++ case BCM47XX_BOARD_MOTOROLA_WE800G: ++ err = bcm47xx_copy_bdata(bcm47xx_buttons_motorola_we800g); ++ break; ++ case BCM47XX_BOARD_MOTOROLA_WR850GP: ++ err = bcm47xx_copy_bdata(bcm47xx_buttons_motorola_wr850gp); ++ break; ++ case BCM47XX_BOARD_MOTOROLA_WR850GV2V3: ++ err = bcm47xx_copy_bdata(bcm47xx_buttons_motorola_wr850gv2v3); ++ break; ++ ++ case BCM47XX_BOARD_NETGEAR_WNDR3400V1: ++ err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wndr3400v1); ++ break; ++ case BCM47XX_BOARD_NETGEAR_WNDR3700V3: ++ err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wndr3700v3); ++ break; + case BCM47XX_BOARD_NETGEAR_WNDR4500V1: + err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wndr4500_v1); + break; ++ case BCM47XX_BOARD_NETGEAR_WNR834BV2: ++ err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wnr834bv2); ++ break; ++ ++ case BCM47XX_BOARD_SIMPLETECH_SIMPLESHARE: ++ err = bcm47xx_copy_bdata(bcm47xx_buttons_simpletech_simpleshare); ++ break; ++ + default: + pr_debug("No buttons configuration found for this device\n"); + return -ENOTSUPP; diff --git a/target/linux/brcm47xx/patches-3.10/123-MIPS-BCM47XX-Import-LEDs-database-from-OpenWrt.patch b/target/linux/brcm47xx/patches-3.10/123-MIPS-BCM47XX-Import-LEDs-database-from-OpenWrt.patch new file mode 100644 index 0000000000..2c7b5b7e4e --- /dev/null +++ b/target/linux/brcm47xx/patches-3.10/123-MIPS-BCM47XX-Import-LEDs-database-from-OpenWrt.patch @@ -0,0 +1,532 @@ +From 6d4b22bc843c9de0f6acdbdcfb9b91b897a39e9c Mon Sep 17 00:00:00 2001 +From: Rafa? Mi?ecki +Date: Thu, 2 Jan 2014 12:32:57 +0100 +Subject: [PATCH 032/110] MIPS: BCM47XX: Import LEDs database from OpenWrt + +Signed-off-by: Rafa? Mi?ecki +Acked-by: John Crispin +Patchwork: http://patchwork.linux-mips.org/patch/6298/ +--- + arch/mips/bcm47xx/leds.c | 494 ++++++++++++++++++++++++++++++++++++++++++++++ + 1 file changed, 494 insertions(+) + +--- a/arch/mips/bcm47xx/leds.c ++++ b/arch/mips/bcm47xx/leds.c +@@ -3,6 +3,334 @@ + #include + #include + ++/************************************************** ++ * Database ++ **************************************************/ ++ ++#define BCM47XX_GPIO_LED(_gpio, _color, _function, _active_low, \ ++ _default_state) \ ++ { \ ++ .name = "bcm47xx:" _color ":" _function, \ ++ .gpio = _gpio, \ ++ .active_low = _active_low, \ ++ .default_state = _default_state, \ ++ } ++ ++/* Asus */ ++ ++static const struct gpio_led ++bcm47xx_leds_asus_rtn12[] __initconst = { ++ BCM47XX_GPIO_LED(2, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON), ++ BCM47XX_GPIO_LED(7, "unk", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF), ++}; ++ ++static const struct gpio_led ++bcm47xx_leds_asus_rtn16[] __initconst = { ++ BCM47XX_GPIO_LED(1, "blue", "power", 1, LEDS_GPIO_DEFSTATE_ON), ++ BCM47XX_GPIO_LED(7, "blue", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF), ++}; ++ ++static const struct gpio_led ++bcm47xx_leds_asus_rtn66u[] __initconst = { ++ BCM47XX_GPIO_LED(12, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON), ++ BCM47XX_GPIO_LED(15, "unk", "usb", 1, LEDS_GPIO_DEFSTATE_OFF), ++}; ++ ++static const struct gpio_led ++bcm47xx_leds_asus_wl300g[] __initconst = { ++ BCM47XX_GPIO_LED(0, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON), ++}; ++ ++static const struct gpio_led ++bcm47xx_leds_asus_wl320ge[] __initconst = { ++ BCM47XX_GPIO_LED(0, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(2, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON), ++ BCM47XX_GPIO_LED(11, "unk", "link", 1, LEDS_GPIO_DEFSTATE_OFF), ++}; ++ ++static const struct gpio_led ++bcm47xx_leds_asus_wl330ge[] __initconst = { ++ BCM47XX_GPIO_LED(0, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON), ++}; ++ ++static const struct gpio_led ++bcm47xx_leds_asus_wl500gd[] __initconst = { ++ BCM47XX_GPIO_LED(0, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON), ++}; ++ ++static const struct gpio_led ++bcm47xx_leds_asus_wl500gpv1[] __initconst = { ++ BCM47XX_GPIO_LED(1, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON), ++}; ++ ++static const struct gpio_led ++bcm47xx_leds_asus_wl500gpv2[] __initconst = { ++ BCM47XX_GPIO_LED(0, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON), ++ BCM47XX_GPIO_LED(1, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF), ++}; ++ ++static const struct gpio_led ++bcm47xx_leds_asus_wl500w[] __initconst = { ++ BCM47XX_GPIO_LED(5, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON), ++}; ++ ++static const struct gpio_led ++bcm47xx_leds_asus_wl520gc[] __initconst = { ++ BCM47XX_GPIO_LED(0, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON), ++ BCM47XX_GPIO_LED(1, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF), ++}; ++ ++static const struct gpio_led ++bcm47xx_leds_asus_wl520gu[] __initconst = { ++ BCM47XX_GPIO_LED(0, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON), ++ BCM47XX_GPIO_LED(1, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF), ++}; ++ ++static const struct gpio_led ++bcm47xx_leds_asus_wl700ge[] __initconst = { ++ BCM47XX_GPIO_LED(1, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON), /* Labeled "READY" (there is no "power" LED). Originally ON, flashing on USB activity. */ ++}; ++ ++static const struct gpio_led ++bcm47xx_leds_asus_wlhdd[] __initconst = { ++ BCM47XX_GPIO_LED(0, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON), ++ BCM47XX_GPIO_LED(2, "unk", "usb", 1, LEDS_GPIO_DEFSTATE_OFF), ++}; ++ ++/* Belkin */ ++ ++static const struct gpio_led ++bcm47xx_leds_belkin_f7d4301[] __initconst = { ++ BCM47XX_GPIO_LED(10, "green", "power", 1, LEDS_GPIO_DEFSTATE_ON), ++ BCM47XX_GPIO_LED(11, "amber", "power", 1, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(12, "unk", "wps", 1, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(13, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(14, "unk", "usb0", 1, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(15, "unk", "usb1", 1, LEDS_GPIO_DEFSTATE_OFF), ++}; ++ ++/* Buffalo */ ++ ++static const struct gpio_led ++bcm47xx_leds_buffalo_whr2_a54g54[] __initconst = { ++ BCM47XX_GPIO_LED(7, "unk", "diag", 1, LEDS_GPIO_DEFSTATE_OFF), ++}; ++ ++static const struct gpio_led ++bcm47xx_leds_buffalo_whr_g125[] __initconst = { ++ BCM47XX_GPIO_LED(1, "unk", "bridge", 1, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(2, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(3, "unk", "internal", 1, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(6, "unk", "wps", 1, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(7, "unk", "diag", 1, LEDS_GPIO_DEFSTATE_OFF), ++}; ++ ++static const struct gpio_led ++bcm47xx_leds_buffalo_whr_g54s[] __initconst = { ++ BCM47XX_GPIO_LED(1, "unk", "bridge", 1, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(2, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(3, "unk", "internal", 1, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(6, "unk", "wps", 1, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(7, "unk", "diag", 1, LEDS_GPIO_DEFSTATE_OFF), ++}; ++ ++static const struct gpio_led ++bcm47xx_leds_buffalo_whr_hp_g54[] __initconst = { ++ BCM47XX_GPIO_LED(1, "unk", "bridge", 1, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(2, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(3, "unk", "internal", 1, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(6, "unk", "wps", 1, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(7, "unk", "diag", 1, LEDS_GPIO_DEFSTATE_OFF), ++}; ++ ++static const struct gpio_led ++bcm47xx_leds_buffalo_wzr_g300n[] __initconst = { ++ BCM47XX_GPIO_LED(1, "unk", "bridge", 1, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(6, "unk", "wps", 1, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(7, "unk", "diag", 1, LEDS_GPIO_DEFSTATE_OFF), ++}; ++ ++static const struct gpio_led ++bcm47xx_leds_buffalo_wzr_rs_g54[] __initconst = { ++ BCM47XX_GPIO_LED(6, "unk", "wps", 1, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(1, "unk", "vpn", 1, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(7, "unk", "diag", 1, LEDS_GPIO_DEFSTATE_OFF), ++}; ++ ++static const struct gpio_led ++bcm47xx_leds_buffalo_wzr_rs_g54hp[] __initconst = { ++ BCM47XX_GPIO_LED(6, "unk", "wps", 1, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(1, "unk", "vpn", 1, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(7, "unk", "diag", 1, LEDS_GPIO_DEFSTATE_OFF), ++}; ++ ++/* Dell */ ++ ++static const struct gpio_led ++bcm47xx_leds_dell_tm2300[] __initconst = { ++ BCM47XX_GPIO_LED(6, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(7, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON), ++}; ++ ++/* D-Link */ ++ ++static const struct gpio_led ++bcm47xx_leds_dlink_dir130[] __initconst = { ++ BCM47XX_GPIO_LED(0, "green", "status", 1, LEDS_GPIO_DEFSTATE_OFF), /* Originally blinking when device is ready, separated from "power" LED */ ++ BCM47XX_GPIO_LED(6, "blue", "unk", 1, LEDS_GPIO_DEFSTATE_OFF), ++}; ++ ++static const struct gpio_led ++bcm47xx_leds_dlink_dir330[] __initconst = { ++ BCM47XX_GPIO_LED(0, "green", "status", 1, LEDS_GPIO_DEFSTATE_OFF), /* Originally blinking when device is ready, separated from "power" LED */ ++ BCM47XX_GPIO_LED(4, "unk", "usb", 1, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(6, "blue", "unk", 1, LEDS_GPIO_DEFSTATE_OFF), ++}; ++ ++/* Huawei */ ++ ++static const struct gpio_led ++bcm47xx_leds_huawei_e970[] __initconst = { ++ BCM47XX_GPIO_LED(0, "unk", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF), ++}; ++ ++/* Linksys */ ++ ++static const struct gpio_led ++bcm47xx_leds_linksys_e1000v1[] __initconst = { ++ BCM47XX_GPIO_LED(0, "blue", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(1, "blue", "power", 0, LEDS_GPIO_DEFSTATE_ON), ++ BCM47XX_GPIO_LED(2, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(4, "blue", "wps", 1, LEDS_GPIO_DEFSTATE_OFF), ++}; ++ ++static const struct gpio_led ++bcm47xx_leds_linksys_e1000v21[] __initconst = { ++ BCM47XX_GPIO_LED(5, "unk", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(6, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON), ++ BCM47XX_GPIO_LED(7, "amber", "wps", 0, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(8, "blue", "wps", 0, LEDS_GPIO_DEFSTATE_OFF), ++}; ++ ++static const struct gpio_led ++bcm47xx_leds_linksys_e2000v1[] __initconst = { ++ BCM47XX_GPIO_LED(1, "blue", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(2, "blue", "power", 0, LEDS_GPIO_DEFSTATE_ON), ++ BCM47XX_GPIO_LED(3, "blue", "wps", 1, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(4, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF), ++}; ++ ++static const struct gpio_led ++bcm47xx_leds_linksys_e3000v1[] __initconst = { ++ BCM47XX_GPIO_LED(0, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(1, "unk", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(3, "blue", "wps", 1, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(5, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON), ++ BCM47XX_GPIO_LED(7, "unk", "usb", 0, LEDS_GPIO_DEFSTATE_OFF), ++}; ++ ++static const struct gpio_led ++bcm47xx_leds_linksys_e3200v1[] __initconst = { ++ BCM47XX_GPIO_LED(3, "green", "power", 1, LEDS_GPIO_DEFSTATE_ON), ++}; ++ ++static const struct gpio_led ++bcm47xx_leds_linksys_e4200v1[] __initconst = { ++ BCM47XX_GPIO_LED(5, "white", "power", 1, LEDS_GPIO_DEFSTATE_ON), ++}; ++ ++static const struct gpio_led ++bcm47xx_leds_linksys_wrt150nv1[] __initconst = { ++ BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON), ++ BCM47XX_GPIO_LED(3, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(5, "green", "wps", 1, LEDS_GPIO_DEFSTATE_OFF), ++}; ++ ++static const struct gpio_led ++bcm47xx_leds_linksys_wrt150nv11[] __initconst = { ++ BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON), ++ BCM47XX_GPIO_LED(3, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(5, "green", "wps", 1, LEDS_GPIO_DEFSTATE_OFF), ++}; ++ ++static const struct gpio_led ++bcm47xx_leds_linksys_wrt160nv1[] __initconst = { ++ BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON), ++ BCM47XX_GPIO_LED(3, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(5, "blue", "wps", 1, LEDS_GPIO_DEFSTATE_OFF), ++}; ++ ++static const struct gpio_led ++bcm47xx_leds_linksys_wrt160nv3[] __initconst = { ++ BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON), ++ BCM47XX_GPIO_LED(2, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(4, "blue", "wps", 1, LEDS_GPIO_DEFSTATE_OFF), ++}; ++ ++static const struct gpio_led ++bcm47xx_leds_linksys_wrt300nv11[] __initconst = { ++ BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON), ++ BCM47XX_GPIO_LED(3, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(5, "green", "wps", 1, LEDS_GPIO_DEFSTATE_OFF), ++}; ++ ++static const struct gpio_led ++bcm47xx_leds_linksys_wrt310nv1[] __initconst = { ++ BCM47XX_GPIO_LED(1, "blue", "power", 0, LEDS_GPIO_DEFSTATE_ON), ++ BCM47XX_GPIO_LED(3, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(9, "blue", "wps", 1, LEDS_GPIO_DEFSTATE_OFF), ++}; ++ ++static const struct gpio_led ++bcm47xx_leds_linksys_wrt610nv1[] __initconst = { ++ BCM47XX_GPIO_LED(0, "unk", "usb", 1, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(3, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(9, "blue", "wps", 1, LEDS_GPIO_DEFSTATE_OFF), ++}; ++ ++static const struct gpio_led ++bcm47xx_leds_linksys_wrt610nv2[] __initconst = { ++ BCM47XX_GPIO_LED(0, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(1, "unk", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(3, "blue", "wps", 1, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(5, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON), ++ BCM47XX_GPIO_LED(7, "unk", "usb", 0, LEDS_GPIO_DEFSTATE_OFF), ++}; ++ ++/* Motorola */ ++ ++static const struct gpio_led ++bcm47xx_leds_motorola_we800g[] __initconst = { ++ BCM47XX_GPIO_LED(1, "amber", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(2, "unk", "unk", 1, LEDS_GPIO_DEFSTATE_OFF), /* There are only 3 LEDs: Power, Wireless and Device (ethernet) */ ++ BCM47XX_GPIO_LED(4, "green", "power", 0, LEDS_GPIO_DEFSTATE_ON), ++}; ++ ++static const struct gpio_led ++bcm47xx_leds_motorola_wr850gp[] __initconst = { ++ BCM47XX_GPIO_LED(0, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON), ++ BCM47XX_GPIO_LED(6, "unk", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(7, "unk", "diag", 1, LEDS_GPIO_DEFSTATE_OFF), ++}; ++ ++static const struct gpio_led ++bcm47xx_leds_motorola_wr850gv2v3[] __initconst = { ++ BCM47XX_GPIO_LED(0, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON), ++ BCM47XX_GPIO_LED(7, "unk", "diag", 1, LEDS_GPIO_DEFSTATE_OFF), ++}; ++ ++/* Netgear */ ++ ++static const struct gpio_led ++bcm47xx_leds_netgear_wndr3400v1[] __initconst = { ++ BCM47XX_GPIO_LED(2, "green", "usb", 1, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(3, "green", "power", 0, LEDS_GPIO_DEFSTATE_ON), ++ BCM47XX_GPIO_LED(7, "amber", "power", 0, LEDS_GPIO_DEFSTATE_OFF), ++}; ++ + static const struct gpio_led + bcm47xx_leds_netgear_wndr4500_v1_leds[] __initconst = { + { +@@ -49,6 +377,24 @@ bcm47xx_leds_netgear_wndr4500_v1_leds[] + }, + }; + ++static const struct gpio_led ++bcm47xx_leds_netgear_wnr834bv2[] __initconst = { ++ BCM47XX_GPIO_LED(2, "green", "power", 0, LEDS_GPIO_DEFSTATE_ON), ++ BCM47XX_GPIO_LED(3, "amber", "power", 0, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(7, "unk", "connected", 0, LEDS_GPIO_DEFSTATE_OFF), ++}; ++ ++/* SimpleTech */ ++ ++static const struct gpio_led ++bcm47xx_leds_simpletech_simpleshare[] __initconst = { ++ BCM47XX_GPIO_LED(1, "unk", "status", 1, LEDS_GPIO_DEFSTATE_OFF), /* "Ready" LED */ ++}; ++ ++/************************************************** ++ * Init ++ **************************************************/ ++ + static struct gpio_led_platform_data bcm47xx_leds_pdata; + + #define bcm47xx_set_pdata(dev_leds) do { \ +@@ -61,9 +407,157 @@ void __init bcm47xx_leds_register(void) + enum bcm47xx_board board = bcm47xx_board_get(); + + switch (board) { ++ case BCM47XX_BOARD_ASUS_RTN12: ++ bcm47xx_set_pdata(bcm47xx_leds_asus_rtn12); ++ break; ++ case BCM47XX_BOARD_ASUS_RTN16: ++ bcm47xx_set_pdata(bcm47xx_leds_asus_rtn16); ++ break; ++ case BCM47XX_BOARD_ASUS_RTN66U: ++ bcm47xx_set_pdata(bcm47xx_leds_asus_rtn66u); ++ break; ++ case BCM47XX_BOARD_ASUS_WL300G: ++ bcm47xx_set_pdata(bcm47xx_leds_asus_wl300g); ++ break; ++ case BCM47XX_BOARD_ASUS_WL320GE: ++ bcm47xx_set_pdata(bcm47xx_leds_asus_wl320ge); ++ break; ++ case BCM47XX_BOARD_ASUS_WL330GE: ++ bcm47xx_set_pdata(bcm47xx_leds_asus_wl330ge); ++ break; ++ case BCM47XX_BOARD_ASUS_WL500GD: ++ bcm47xx_set_pdata(bcm47xx_leds_asus_wl500gd); ++ break; ++ case BCM47XX_BOARD_ASUS_WL500GPV1: ++ bcm47xx_set_pdata(bcm47xx_leds_asus_wl500gpv1); ++ break; ++ case BCM47XX_BOARD_ASUS_WL500GPV2: ++ bcm47xx_set_pdata(bcm47xx_leds_asus_wl500gpv2); ++ break; ++ case BCM47XX_BOARD_ASUS_WL500W: ++ bcm47xx_set_pdata(bcm47xx_leds_asus_wl500w); ++ break; ++ case BCM47XX_BOARD_ASUS_WL520GC: ++ bcm47xx_set_pdata(bcm47xx_leds_asus_wl520gc); ++ break; ++ case BCM47XX_BOARD_ASUS_WL520GU: ++ bcm47xx_set_pdata(bcm47xx_leds_asus_wl520gu); ++ break; ++ case BCM47XX_BOARD_ASUS_WL700GE: ++ bcm47xx_set_pdata(bcm47xx_leds_asus_wl700ge); ++ break; ++ case BCM47XX_BOARD_ASUS_WLHDD: ++ bcm47xx_set_pdata(bcm47xx_leds_asus_wlhdd); ++ break; ++ ++ case BCM47XX_BOARD_BELKIN_F7D4301: ++ bcm47xx_set_pdata(bcm47xx_leds_belkin_f7d4301); ++ break; ++ ++ case BCM47XX_BOARD_BUFFALO_WHR2_A54G54: ++ bcm47xx_set_pdata(bcm47xx_leds_buffalo_whr2_a54g54); ++ break; ++ case BCM47XX_BOARD_BUFFALO_WHR_G125: ++ bcm47xx_set_pdata(bcm47xx_leds_buffalo_whr_g125); ++ break; ++ case BCM47XX_BOARD_BUFFALO_WHR_G54S: ++ bcm47xx_set_pdata(bcm47xx_leds_buffalo_whr_g54s); ++ break; ++ case BCM47XX_BOARD_BUFFALO_WHR_HP_G54: ++ bcm47xx_set_pdata(bcm47xx_leds_buffalo_whr_hp_g54); ++ break; ++ case BCM47XX_BOARD_BUFFALO_WZR_G300N: ++ bcm47xx_set_pdata(bcm47xx_leds_buffalo_wzr_g300n); ++ break; ++ case BCM47XX_BOARD_BUFFALO_WZR_RS_G54: ++ bcm47xx_set_pdata(bcm47xx_leds_buffalo_wzr_rs_g54); ++ break; ++ case BCM47XX_BOARD_BUFFALO_WZR_RS_G54HP: ++ bcm47xx_set_pdata(bcm47xx_leds_buffalo_wzr_rs_g54hp); ++ break; ++ ++ case BCM47XX_BOARD_DELL_TM2300: ++ bcm47xx_set_pdata(bcm47xx_leds_dell_tm2300); ++ break; ++ ++ case BCM47XX_BOARD_DLINK_DIR130: ++ bcm47xx_set_pdata(bcm47xx_leds_dlink_dir130); ++ break; ++ case BCM47XX_BOARD_DLINK_DIR330: ++ bcm47xx_set_pdata(bcm47xx_leds_dlink_dir330); ++ break; ++ ++ case BCM47XX_BOARD_HUAWEI_E970: ++ bcm47xx_set_pdata(bcm47xx_leds_huawei_e970); ++ break; ++ ++ case BCM47XX_BOARD_LINKSYS_E1000V1: ++ bcm47xx_set_pdata(bcm47xx_leds_linksys_e1000v1); ++ break; ++ case BCM47XX_BOARD_LINKSYS_E1000V21: ++ bcm47xx_set_pdata(bcm47xx_leds_linksys_e1000v21); ++ break; ++ case BCM47XX_BOARD_LINKSYS_E2000V1: ++ bcm47xx_set_pdata(bcm47xx_leds_linksys_e2000v1); ++ break; ++ case BCM47XX_BOARD_LINKSYS_E3000V1: ++ bcm47xx_set_pdata(bcm47xx_leds_linksys_e3000v1); ++ break; ++ case BCM47XX_BOARD_LINKSYS_E3200V1: ++ bcm47xx_set_pdata(bcm47xx_leds_linksys_e3200v1); ++ break; ++ case BCM47XX_BOARD_LINKSYS_E4200V1: ++ bcm47xx_set_pdata(bcm47xx_leds_linksys_e4200v1); ++ break; ++ case BCM47XX_BOARD_LINKSYS_WRT150NV1: ++ bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt150nv1); ++ break; ++ case BCM47XX_BOARD_LINKSYS_WRT150NV11: ++ bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt150nv11); ++ break; ++ case BCM47XX_BOARD_LINKSYS_WRT160NV1: ++ bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt160nv1); ++ break; ++ case BCM47XX_BOARD_LINKSYS_WRT160NV3: ++ bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt160nv3); ++ break; ++ case BCM47XX_BOARD_LINKSYS_WRT300NV11: ++ bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt300nv11); ++ break; ++ case BCM47XX_BOARD_LINKSYS_WRT310NV1: ++ bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt310nv1); ++ break; ++ case BCM47XX_BOARD_LINKSYS_WRT610NV1: ++ bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt610nv1); ++ break; ++ case BCM47XX_BOARD_LINKSYS_WRT610NV2: ++ bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt610nv2); ++ break; ++ ++ case BCM47XX_BOARD_MOTOROLA_WE800G: ++ bcm47xx_set_pdata(bcm47xx_leds_motorola_we800g); ++ break; ++ case BCM47XX_BOARD_MOTOROLA_WR850GP: ++ bcm47xx_set_pdata(bcm47xx_leds_motorola_wr850gp); ++ break; ++ case BCM47XX_BOARD_MOTOROLA_WR850GV2V3: ++ bcm47xx_set_pdata(bcm47xx_leds_motorola_wr850gv2v3); ++ break; ++ ++ case BCM47XX_BOARD_NETGEAR_WNDR3400V1: ++ bcm47xx_set_pdata(bcm47xx_leds_netgear_wndr3400v1); ++ break; + case BCM47XX_BOARD_NETGEAR_WNDR4500V1: + bcm47xx_set_pdata(bcm47xx_leds_netgear_wndr4500_v1_leds); + break; ++ case BCM47XX_BOARD_NETGEAR_WNR834BV2: ++ bcm47xx_set_pdata(bcm47xx_leds_netgear_wnr834bv2); ++ break; ++ ++ case BCM47XX_BOARD_SIMPLETECH_SIMPLESHARE: ++ bcm47xx_set_pdata(bcm47xx_leds_simpletech_simpleshare); ++ break; ++ + default: + pr_debug("No LEDs configuration found for this device\n"); + return; diff --git a/target/linux/brcm47xx/patches-3.10/124-MIPS-BCM47XX-Enable-buttons-support-on-SSB.patch b/target/linux/brcm47xx/patches-3.10/124-MIPS-BCM47XX-Enable-buttons-support-on-SSB.patch new file mode 100644 index 0000000000..7d599553c4 --- /dev/null +++ b/target/linux/brcm47xx/patches-3.10/124-MIPS-BCM47XX-Enable-buttons-support-on-SSB.patch @@ -0,0 +1,36 @@ +From 6dac092b12755ccbc00412871cd9535b687d16d7 Mon Sep 17 00:00:00 2001 +From: Rafa? Mi?ecki +Date: Fri, 3 Jan 2014 09:55:30 +0100 +Subject: [PATCH] MIPS: BCM47XX: Enable buttons support on SSB + +This is supported since implementing IRQ domain in ssb. + +Signed-off-by: Rafa? Mi?ecki +--- + arch/mips/bcm47xx/buttons.c | 8 -------- + 1 file changed, 8 deletions(-) + +--- a/arch/mips/bcm47xx/buttons.c ++++ b/arch/mips/bcm47xx/buttons.c +@@ -3,7 +3,6 @@ + #include + #include + #include +-#include + #include + #include + +@@ -371,13 +370,6 @@ int __init bcm47xx_buttons_register(void + enum bcm47xx_board board = bcm47xx_board_get(); + int err; + +-#ifdef CONFIG_BCM47XX_SSB +- if (bcm47xx_bus_type == BCM47XX_BUS_TYPE_SSB) { +- pr_debug("Buttons on SSB are not supported yet.\n"); +- return -ENOTSUPP; +- } +-#endif +- + switch (board) { + case BCM47XX_BOARD_ASUS_RTN12: + err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_rtn12); diff --git a/target/linux/brcm47xx/patches-3.10/125-MIPS-BCM47XX-Convert-WNDR4500-to-new-syntax.patch b/target/linux/brcm47xx/patches-3.10/125-MIPS-BCM47XX-Convert-WNDR4500-to-new-syntax.patch new file mode 100644 index 0000000000..00f962aa85 --- /dev/null +++ b/target/linux/brcm47xx/patches-3.10/125-MIPS-BCM47XX-Convert-WNDR4500-to-new-syntax.patch @@ -0,0 +1,118 @@ +From 2d842783d4aaa25803e92f663869ea64a4eddd00 Mon Sep 17 00:00:00 2001 +From: Rafa? Mi?ecki +Date: Fri, 3 Jan 2014 09:37:42 +0100 +Subject: [PATCH] MIPS: BCM47XX: Convert WNDR4500 to new syntax + +Signed-off-by: Rafa? Mi?ecki +--- + arch/mips/bcm47xx/buttons.c | 22 ++++-------------- + arch/mips/bcm47xx/leds.c | 53 ++++++++----------------------------------- + 2 files changed, 14 insertions(+), 61 deletions(-) + +--- a/arch/mips/bcm47xx/buttons.c ++++ b/arch/mips/bcm47xx/buttons.c +@@ -304,22 +304,10 @@ bcm47xx_buttons_netgear_wndr3700v3[] __i + }; + + static const struct gpio_keys_button +-bcm47xx_buttons_netgear_wndr4500_v1[] __initconst = { +- { +- .code = KEY_WPS_BUTTON, +- .gpio = 4, +- .active_low = 1, +- }, +- { +- .code = KEY_RFKILL, +- .gpio = 5, +- .active_low = 1, +- }, +- { +- .code = KEY_RESTART, +- .gpio = 6, +- .active_low = 1, +- }, ++bcm47xx_buttons_netgear_wndr4500v1[] __initconst = { ++ BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON), ++ BCM47XX_GPIO_KEY(5, KEY_RFKILL), ++ BCM47XX_GPIO_KEY(6, KEY_RESTART), + }; + + static const struct gpio_keys_button +@@ -515,7 +503,7 @@ int __init bcm47xx_buttons_register(void + err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wndr3700v3); + break; + case BCM47XX_BOARD_NETGEAR_WNDR4500V1: +- err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wndr4500_v1); ++ err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wndr4500v1); + break; + case BCM47XX_BOARD_NETGEAR_WNR834BV2: + err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wnr834bv2); +--- a/arch/mips/bcm47xx/leds.c ++++ b/arch/mips/bcm47xx/leds.c +@@ -332,49 +332,14 @@ bcm47xx_leds_netgear_wndr3400v1[] __init + }; + + static const struct gpio_led +-bcm47xx_leds_netgear_wndr4500_v1_leds[] __initconst = { +- { +- .name = "bcm47xx:green:wps", +- .gpio = 1, +- .active_low = 1, +- .default_state = LEDS_GPIO_DEFSTATE_KEEP, +- }, +- { +- .name = "bcm47xx:green:power", +- .gpio = 2, +- .active_low = 1, +- .default_state = LEDS_GPIO_DEFSTATE_KEEP, +- }, +- { +- .name = "bcm47xx:orange:power", +- .gpio = 3, +- .active_low = 1, +- .default_state = LEDS_GPIO_DEFSTATE_KEEP, +- }, +- { +- .name = "bcm47xx:green:usb1", +- .gpio = 8, +- .active_low = 1, +- .default_state = LEDS_GPIO_DEFSTATE_KEEP, +- }, +- { +- .name = "bcm47xx:green:2ghz", +- .gpio = 9, +- .active_low = 1, +- .default_state = LEDS_GPIO_DEFSTATE_KEEP, +- }, +- { +- .name = "bcm47xx:blue:5ghz", +- .gpio = 11, +- .active_low = 1, +- .default_state = LEDS_GPIO_DEFSTATE_KEEP, +- }, +- { +- .name = "bcm47xx:green:usb2", +- .gpio = 14, +- .active_low = 1, +- .default_state = LEDS_GPIO_DEFSTATE_KEEP, +- }, ++bcm47xx_leds_netgear_wndr4500v1[] __initconst = { ++ BCM47XX_GPIO_LED(1, "green", "wps", 1, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(2, "green", "power", 1, LEDS_GPIO_DEFSTATE_ON), ++ BCM47XX_GPIO_LED(3, "amber", "power", 1, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(8, "green", "usb1", 1, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(9, "green", "2ghz", 1, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(11, "blue", "5ghz", 1, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(14, "green", "usb2", 1, LEDS_GPIO_DEFSTATE_OFF), + }; + + static const struct gpio_led +@@ -548,7 +513,7 @@ void __init bcm47xx_leds_register(void) + bcm47xx_set_pdata(bcm47xx_leds_netgear_wndr3400v1); + break; + case BCM47XX_BOARD_NETGEAR_WNDR4500V1: +- bcm47xx_set_pdata(bcm47xx_leds_netgear_wndr4500_v1_leds); ++ bcm47xx_set_pdata(bcm47xx_leds_netgear_wndr4500v1); + break; + case BCM47XX_BOARD_NETGEAR_WNR834BV2: + bcm47xx_set_pdata(bcm47xx_leds_netgear_wnr834bv2); diff --git a/target/linux/brcm47xx/patches-3.10/126-MIPS-BCM47XX-Use-timer-trigger-for-status-LEDs.patch b/target/linux/brcm47xx/patches-3.10/126-MIPS-BCM47XX-Use-timer-trigger-for-status-LEDs.patch new file mode 100644 index 0000000000..e14bea94d1 --- /dev/null +++ b/target/linux/brcm47xx/patches-3.10/126-MIPS-BCM47XX-Use-timer-trigger-for-status-LEDs.patch @@ -0,0 +1,49 @@ +From 5c985c2a17ae0bdbc95fd8246631e00a35746396 Mon Sep 17 00:00:00 2001 +From: Rafa? Mi?ecki +Date: Fri, 3 Jan 2014 09:04:39 +0100 +Subject: [PATCH] MIPS: BCM47XX: Use "timer" trigger for status LEDs + +Some devices have power LED as well as status LED. The second one is +used to show the firmware is up and running. Set "timer" trigger for +such LEDs. + +Signed-off-by: Rafa? Mi?ecki +--- + arch/mips/bcm47xx/leds.c | 14 ++++++++++++-- + 1 file changed, 12 insertions(+), 2 deletions(-) + +--- a/arch/mips/bcm47xx/leds.c ++++ b/arch/mips/bcm47xx/leds.c +@@ -16,6 +16,16 @@ + .default_state = _default_state, \ + } + ++#define BCM47XX_GPIO_LED_TRIGGER(_gpio, _color, _function, _active_low, \ ++ _default_trigger) \ ++ { \ ++ .name = "bcm47xx:" _color ":" _function, \ ++ .gpio = _gpio, \ ++ .active_low = _active_low, \ ++ .default_state = LEDS_GPIO_DEFSTATE_OFF, \ ++ .default_trigger = _default_trigger, \ ++ } ++ + /* Asus */ + + static const struct gpio_led +@@ -176,13 +186,13 @@ bcm47xx_leds_dell_tm2300[] __initconst = + + static const struct gpio_led + bcm47xx_leds_dlink_dir130[] __initconst = { +- BCM47XX_GPIO_LED(0, "green", "status", 1, LEDS_GPIO_DEFSTATE_OFF), /* Originally blinking when device is ready, separated from "power" LED */ ++ BCM47XX_GPIO_LED_TRIGGER(0, "green", "status", 1, "timer"), /* Originally blinking when device is ready, separated from "power" LED */ + BCM47XX_GPIO_LED(6, "blue", "unk", 1, LEDS_GPIO_DEFSTATE_OFF), + }; + + static const struct gpio_led + bcm47xx_leds_dlink_dir330[] __initconst = { +- BCM47XX_GPIO_LED(0, "green", "status", 1, LEDS_GPIO_DEFSTATE_OFF), /* Originally blinking when device is ready, separated from "power" LED */ ++ BCM47XX_GPIO_LED_TRIGGER(0, "green", "status", 1, "timer"), /* Originally blinking when device is ready, separated from "power" LED */ + BCM47XX_GPIO_LED(4, "unk", "usb", 1, LEDS_GPIO_DEFSTATE_OFF), + BCM47XX_GPIO_LED(6, "blue", "unk", 1, LEDS_GPIO_DEFSTATE_OFF), + }; diff --git a/target/linux/brcm47xx/patches-3.10/127-MIPS-BCM47XX-add-button-and-led-configuration-for-so.patch b/target/linux/brcm47xx/patches-3.10/127-MIPS-BCM47XX-add-button-and-led-configuration-for-so.patch new file mode 100644 index 0000000000..845d071192 --- /dev/null +++ b/target/linux/brcm47xx/patches-3.10/127-MIPS-BCM47XX-add-button-and-led-configuration-for-so.patch @@ -0,0 +1,133 @@ +From 9894af92816e729162812f2554c9d97578138834 Mon Sep 17 00:00:00 2001 +From: Hauke Mehrtens +Date: Fri, 10 Jan 2014 23:55:28 +0100 +Subject: [PATCH 1/2] MIPS: BCM47XX: add button and led configuration for some + Linksys devices + +This adds led and button GPIO configuration for Linksys wrt54g3gv2, +wrt54gsv1 and wrtsl54gs. This is based on OpenWrt broadcom-diag code. + +Signed-off-by: Hauke Mehrtens +--- + arch/mips/bcm47xx/buttons.c | 27 +++++++++++++++++++++++++++ + arch/mips/bcm47xx/leds.c | 33 +++++++++++++++++++++++++++++++++ + 2 files changed, 60 insertions(+) + +--- a/arch/mips/bcm47xx/buttons.c ++++ b/arch/mips/bcm47xx/buttons.c +@@ -259,6 +259,18 @@ bcm47xx_buttons_linksys_wrt310nv1[] __in + }; + + static const struct gpio_keys_button ++bcm47xx_buttons_linksys_wrt54g3gv2[] __initconst = { ++ BCM47XX_GPIO_KEY(5, KEY_WIMAX), ++ BCM47XX_GPIO_KEY(6, KEY_RESTART), ++}; ++ ++static const struct gpio_keys_button ++bcm47xx_buttons_linksys_wrt54gsv1[] __initconst = { ++ BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON), ++ BCM47XX_GPIO_KEY(6, KEY_RESTART), ++}; ++ ++static const struct gpio_keys_button + bcm47xx_buttons_linksys_wrt610nv1[] __initconst = { + BCM47XX_GPIO_KEY(6, KEY_RESTART), + BCM47XX_GPIO_KEY(8, KEY_WPS_BUTTON), +@@ -270,6 +282,12 @@ bcm47xx_buttons_linksys_wrt610nv2[] __in + BCM47XX_GPIO_KEY(6, KEY_RESTART), + }; + ++static const struct gpio_keys_button ++bcm47xx_buttons_linksys_wrtsl54gs[] __initconst = { ++ BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON), ++ BCM47XX_GPIO_KEY(6, KEY_RESTART), ++}; ++ + /* Motorola */ + + static const struct gpio_keys_button +@@ -479,12 +497,21 @@ int __init bcm47xx_buttons_register(void + case BCM47XX_BOARD_LINKSYS_WRT310NV1: + err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt310nv1); + break; ++ case BCM47XX_BOARD_LINKSYS_WRT54GSV1: ++ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt54gsv1); ++ break; ++ case BCM47XX_BOARD_LINKSYS_WRT54G3GV2: ++ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt54g3gv2); ++ break; + case BCM47XX_BOARD_LINKSYS_WRT610NV1: + err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt610nv1); + break; + case BCM47XX_BOARD_LINKSYS_WRT610NV2: + err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt610nv2); + break; ++ case BCM47XX_BOARD_LINKSYS_WRTSL54GS: ++ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrtsl54gs); ++ break; + + case BCM47XX_BOARD_MOTOROLA_WE800G: + err = bcm47xx_copy_bdata(bcm47xx_buttons_motorola_we800g); +--- a/arch/mips/bcm47xx/leds.c ++++ b/arch/mips/bcm47xx/leds.c +@@ -292,6 +292,21 @@ bcm47xx_leds_linksys_wrt310nv1[] __initc + }; + + static const struct gpio_led ++bcm47xx_leds_linksys_wrt54gsv1[] __initconst = { ++ BCM47XX_GPIO_LED(0, "unk", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON), ++ BCM47XX_GPIO_LED(5, "white", "wps", 1, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(7, "orange", "wps", 1, LEDS_GPIO_DEFSTATE_OFF), ++}; ++ ++static const struct gpio_led ++bcm47xx_leds_linksys_wrt54g3gv2[] __initconst = { ++ BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON), ++ BCM47XX_GPIO_LED(2, "green", "3g", 0, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(3, "blue", "3g", 0, LEDS_GPIO_DEFSTATE_OFF), ++}; ++ ++static const struct gpio_led + bcm47xx_leds_linksys_wrt610nv1[] __initconst = { + BCM47XX_GPIO_LED(0, "unk", "usb", 1, LEDS_GPIO_DEFSTATE_OFF), + BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_OFF), +@@ -308,6 +323,15 @@ bcm47xx_leds_linksys_wrt610nv2[] __initc + BCM47XX_GPIO_LED(7, "unk", "usb", 0, LEDS_GPIO_DEFSTATE_OFF), + }; + ++static const struct gpio_led ++bcm47xx_leds_linksys_wrtsl54gs[] __initconst = { ++ BCM47XX_GPIO_LED(0, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON), ++ BCM47XX_GPIO_LED(2, "white", "wps", 1, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(3, "orange", "wps", 1, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(7, "unk", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF), ++}; ++ + /* Motorola */ + + static const struct gpio_led +@@ -502,12 +526,21 @@ void __init bcm47xx_leds_register(void) + case BCM47XX_BOARD_LINKSYS_WRT310NV1: + bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt310nv1); + break; ++ case BCM47XX_BOARD_LINKSYS_WRT54GSV1: ++ bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt54gsv1); ++ break; ++ case BCM47XX_BOARD_LINKSYS_WRT54G3GV2: ++ bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt54g3gv2); ++ break; + case BCM47XX_BOARD_LINKSYS_WRT610NV1: + bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt610nv1); + break; + case BCM47XX_BOARD_LINKSYS_WRT610NV2: + bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt610nv2); + break; ++ case BCM47XX_BOARD_LINKSYS_WRTSL54GS: ++ bcm47xx_set_pdata(bcm47xx_leds_linksys_wrtsl54gs); ++ break; + + case BCM47XX_BOARD_MOTOROLA_WE800G: + bcm47xx_set_pdata(bcm47xx_leds_motorola_we800g); diff --git a/target/linux/brcm47xx/patches-3.10/128-MIPS-BCM47XX-add-detection-and-GPIO-config-for-Sieme.patch b/target/linux/brcm47xx/patches-3.10/128-MIPS-BCM47XX-add-detection-and-GPIO-config-for-Sieme.patch new file mode 100644 index 0000000000..2c2cfdad77 --- /dev/null +++ b/target/linux/brcm47xx/patches-3.10/128-MIPS-BCM47XX-add-detection-and-GPIO-config-for-Sieme.patch @@ -0,0 +1,89 @@ +From c546fa49901252cbc1e4046d7188858b2f9e130f Mon Sep 17 00:00:00 2001 +From: Hauke Mehrtens +Date: Fri, 10 Jan 2014 23:55:43 +0100 +Subject: [PATCH 2/2] MIPS: BCM47XX: add detection and GPIO config for Siemens + SE505v2 + +This adds board detection for the Siemens SE505v2 and the led gpio +configuration. This board does not have any buttons. +This is based on OpenWrt broadcom-diag and Manuel Munz's nvram dump. + +Signed-off-by: Hauke Mehrtens +--- + arch/mips/bcm47xx/board.c | 17 +++++++++++++++++ + arch/mips/bcm47xx/leds.c | 12 ++++++++++++ + arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h | 2 ++ + 3 files changed, 31 insertions(+) + +--- a/arch/mips/bcm47xx/board.c ++++ b/arch/mips/bcm47xx/board.c +@@ -179,6 +179,13 @@ struct bcm47xx_board_type_list3 bcm47xx_ + { {0}, NULL}, + }; + ++/* boardtype, boardrev */ ++static const ++struct bcm47xx_board_type_list2 bcm47xx_board_list_board_type_rev[] __initconst = { ++ {{BCM47XX_BOARD_SIEMENS_SE505V2, "Siemens SE505 V2"}, "0x0101", "0x10"}, ++ { {0}, NULL}, ++}; ++ + static const + struct bcm47xx_board_type bcm47xx_board_unknown[] __initconst = { + {BCM47XX_BOARD_UNKNOWN, "Unknown Board"}, +@@ -272,6 +279,16 @@ static __init const struct bcm47xx_board + return &e3->board; + } + } ++ ++ if (bcm47xx_nvram_getenv("boardtype", buf1, sizeof(buf1)) >= 0 && ++ bcm47xx_nvram_getenv("boardrev", buf2, sizeof(buf2)) >= 0 && ++ bcm47xx_nvram_getenv("boardnum", buf3, sizeof(buf3)) == -ENOENT) { ++ for (e2 = bcm47xx_board_list_board_type_rev; e2->value1; e2++) { ++ if (!strcmp(buf1, e2->value1) && ++ !strcmp(buf2, e2->value2)) ++ return &e2->board; ++ } ++ } + return bcm47xx_board_unknown; + } + +--- a/arch/mips/bcm47xx/leds.c ++++ b/arch/mips/bcm47xx/leds.c +@@ -383,6 +383,14 @@ bcm47xx_leds_netgear_wnr834bv2[] __initc + BCM47XX_GPIO_LED(7, "unk", "connected", 0, LEDS_GPIO_DEFSTATE_OFF), + }; + ++/* Siemens */ ++static const struct gpio_led ++bcm47xx_leds_siemens_se505v2[] __initconst = { ++ BCM47XX_GPIO_LED(0, "unk", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(3, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF), ++ BCM47XX_GPIO_LED(5, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON), ++}; ++ + /* SimpleTech */ + + static const struct gpio_led +@@ -562,6 +570,10 @@ void __init bcm47xx_leds_register(void) + bcm47xx_set_pdata(bcm47xx_leds_netgear_wnr834bv2); + break; + ++ case BCM47XX_BOARD_SIEMENS_SE505V2: ++ bcm47xx_set_pdata(bcm47xx_leds_siemens_se505v2); ++ break; ++ + case BCM47XX_BOARD_SIMPLETECH_SIMPLESHARE: + bcm47xx_set_pdata(bcm47xx_leds_simpletech_simpleshare); + break; +--- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h ++++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h +@@ -94,6 +94,8 @@ enum bcm47xx_board { + + BCM47XX_BOARD_PHICOMM_M1, + ++ BCM47XX_BOARD_SIEMENS_SE505V2, ++ + BCM47XX_BOARD_SIMPLETECH_SIMPLESHARE, + + BCM47XX_BOARD_ZTE_H218N, diff --git a/target/linux/brcm47xx/patches-3.10/129-MIPS-BCM47XX-add-Belkin-F7Dxxxx-board-detection.patch b/target/linux/brcm47xx/patches-3.10/129-MIPS-BCM47XX-add-Belkin-F7Dxxxx-board-detection.patch new file mode 100644 index 0000000000..ff6c388fb1 --- /dev/null +++ b/target/linux/brcm47xx/patches-3.10/129-MIPS-BCM47XX-add-Belkin-F7Dxxxx-board-detection.patch @@ -0,0 +1,77 @@ +From 44927df87162ae9beb6e7b934b0e75818b88e350 Mon Sep 17 00:00:00 2001 +From: Hauke Mehrtens +Date: Thu, 2 Jan 2014 19:10:05 +0100 +Subject: [PATCH] MIPS: BCM47XX: add Belkin F7Dxxxx board detection + +From: Cody P Schafer + +Add a few Belkin F7Dxxxx entries, with F7D4401 sourced from online +documentation and the "F7D7302" being observed. F7D3301, F7D3302, and +F7D4302 are reasonable guesses which are unlikely to cause +mis-detection. + +Signed-off-by: Cody P Schafer +Signed-off-by: Hauke Mehrtens +--- + arch/mips/bcm47xx/board.c | 4 ++++ + arch/mips/bcm47xx/buttons.c | 4 ++++ + arch/mips/bcm47xx/leds.c | 4 ++++ + arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h | 4 ++++ + 4 files changed, 16 insertions(+) + +--- a/arch/mips/bcm47xx/board.c ++++ b/arch/mips/bcm47xx/board.c +@@ -71,7 +71,11 @@ struct bcm47xx_board_type_list1 bcm47xx_ + {{BCM47XX_BOARD_ASUS_WL500W, "Asus WL500W"}, "WL500gW-"}, + {{BCM47XX_BOARD_ASUS_WL520GC, "Asus WL520GC"}, "WL520GC-"}, + {{BCM47XX_BOARD_ASUS_WL520GU, "Asus WL520GU"}, "WL520GU-"}, ++ {{BCM47XX_BOARD_BELKIN_F7D3301, "Belkin F7D3301"}, "F7D3301"}, ++ {{BCM47XX_BOARD_BELKIN_F7D3302, "Belkin F7D3302"}, "F7D3302"}, + {{BCM47XX_BOARD_BELKIN_F7D4301, "Belkin F7D4301"}, "F7D4301"}, ++ {{BCM47XX_BOARD_BELKIN_F7D4302, "Belkin F7D4302"}, "F7D4302"}, ++ {{BCM47XX_BOARD_BELKIN_F7D4401, "Belkin F7D4401"}, "F7D4401"}, + { {0}, NULL}, + }; + +--- a/arch/mips/bcm47xx/buttons.c ++++ b/arch/mips/bcm47xx/buttons.c +@@ -420,7 +420,11 @@ int __init bcm47xx_buttons_register(void + err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wlhdd); + break; + ++ case BCM47XX_BOARD_BELKIN_F7D3301: ++ case BCM47XX_BOARD_BELKIN_F7D3302: + case BCM47XX_BOARD_BELKIN_F7D4301: ++ case BCM47XX_BOARD_BELKIN_F7D4302: ++ case BCM47XX_BOARD_BELKIN_F7D4401: + err = bcm47xx_copy_bdata(bcm47xx_buttons_belkin_f7d4301); + break; + +--- a/arch/mips/bcm47xx/leds.c ++++ b/arch/mips/bcm47xx/leds.c +@@ -457,7 +457,11 @@ void __init bcm47xx_leds_register(void) + bcm47xx_set_pdata(bcm47xx_leds_asus_wlhdd); + break; + ++ case BCM47XX_BOARD_BELKIN_F7D3301: ++ case BCM47XX_BOARD_BELKIN_F7D3302: + case BCM47XX_BOARD_BELKIN_F7D4301: ++ case BCM47XX_BOARD_BELKIN_F7D4302: ++ case BCM47XX_BOARD_BELKIN_F7D4401: + bcm47xx_set_pdata(bcm47xx_leds_belkin_f7d4301); + break; + +--- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h ++++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h +@@ -27,7 +27,11 @@ enum bcm47xx_board { + BCM47XX_BOARD_ASUS_WL700GE, + BCM47XX_BOARD_ASUS_WLHDD, + ++ BCM47XX_BOARD_BELKIN_F7D3301, ++ BCM47XX_BOARD_BELKIN_F7D3302, + BCM47XX_BOARD_BELKIN_F7D4301, ++ BCM47XX_BOARD_BELKIN_F7D4302, ++ BCM47XX_BOARD_BELKIN_F7D4401, + + BCM47XX_BOARD_BUFFALO_WBR2_G54, + BCM47XX_BOARD_BUFFALO_WHR2_A54G54, diff --git a/target/linux/brcm47xx/patches-3.10/170-fix-74k-cpu.patch b/target/linux/brcm47xx/patches-3.10/170-fix-74k-cpu.patch index 6247933a86..3e1543b7f5 100644 --- a/target/linux/brcm47xx/patches-3.10/170-fix-74k-cpu.patch +++ b/target/linux/brcm47xx/patches-3.10/170-fix-74k-cpu.patch @@ -14,7 +14,7 @@ Acked-by: Rafa? Mi?ecki --- a/arch/mips/bcm47xx/setup.c +++ b/arch/mips/bcm47xx/setup.c -@@ -35,6 +35,7 @@ +@@ -37,6 +37,7 @@ #include #include #include @@ -22,7 +22,7 @@ Acked-by: Rafa? Mi?ecki #include #include #include -@@ -229,6 +230,31 @@ void __init plat_mem_setup(void) +@@ -231,6 +232,31 @@ void __init plat_mem_setup(void) mips_set_machine_name(bcm47xx_board_get_name()); } diff --git a/target/linux/brcm47xx/patches-3.10/208-b44-use-fixed-PHY-device-if-we-do-not-find-any.patch b/target/linux/brcm47xx/patches-3.10/208-b44-use-fixed-PHY-device-if-we-do-not-find-any.patch index e30c454398..89744666e0 100644 --- a/target/linux/brcm47xx/patches-3.10/208-b44-use-fixed-PHY-device-if-we-do-not-find-any.patch +++ b/target/linux/brcm47xx/patches-3.10/208-b44-use-fixed-PHY-device-if-we-do-not-find-any.patch @@ -20,7 +20,7 @@ Signed-off-by: David S. Miller --- a/arch/mips/bcm47xx/setup.c +++ b/arch/mips/bcm47xx/setup.c -@@ -28,6 +28,9 @@ +@@ -30,6 +30,9 @@ #include #include @@ -30,7 +30,7 @@ Signed-off-by: David S. Miller #include #include #include -@@ -255,6 +258,12 @@ static int __init bcm47xx_cpu_fixes(void +@@ -257,6 +260,12 @@ static int __init bcm47xx_cpu_fixes(void } arch_initcall(bcm47xx_cpu_fixes); @@ -43,14 +43,14 @@ Signed-off-by: David S. Miller static int __init bcm47xx_register_bus_complete(void) { switch (bcm47xx_bus_type) { -@@ -269,6 +278,7 @@ static int __init bcm47xx_register_bus_c - break; - #endif - } +@@ -274,6 +283,7 @@ static int __init bcm47xx_register_bus_c + + bcm47xx_buttons_register(); + bcm47xx_leds_register(); + fixed_phy_add(PHY_POLL, 0, &bcm47xx_fixed_phy_status); + return 0; } - device_initcall(bcm47xx_register_bus_complete); --- a/drivers/net/ethernet/broadcom/b44.c +++ b/drivers/net/ethernet/broadcom/b44.c @@ -2233,6 +2233,7 @@ static int b44_register_phy_one(struct b diff --git a/target/linux/brcm47xx/patches-3.10/400-arch-bcm47xx.patch b/target/linux/brcm47xx/patches-3.10/400-arch-bcm47xx.patch index ed3e81600a..7ea3f87c64 100644 --- a/target/linux/brcm47xx/patches-3.10/400-arch-bcm47xx.patch +++ b/target/linux/brcm47xx/patches-3.10/400-arch-bcm47xx.patch @@ -36,7 +36,7 @@ @@ -5,4 +5,5 @@ obj-y += irq.o nvram.o prom.o serial.o setup.o time.o sprom.o - obj-y += board.o + obj-y += board.o buttons.o leds.o +obj-y += gpio.o obj-$(CONFIG_BCM47XX_SSB) += wgt634u.o --- /dev/null diff --git a/target/linux/brcm47xx/patches-3.10/812-disable_wgt634u_crap.patch b/target/linux/brcm47xx/patches-3.10/812-disable_wgt634u_crap.patch index f2950c93bf..e29fa62774 100644 --- a/target/linux/brcm47xx/patches-3.10/812-disable_wgt634u_crap.patch +++ b/target/linux/brcm47xx/patches-3.10/812-disable_wgt634u_crap.patch @@ -2,7 +2,7 @@ +++ b/arch/mips/bcm47xx/Makefile @@ -6,4 +6,3 @@ obj-y += irq.o nvram.o prom.o serial.o setup.o time.o sprom.o - obj-y += board.o + obj-y += board.o buttons.o leds.o obj-y += gpio.o -obj-$(CONFIG_BCM47XX_SSB) += wgt634u.o --- a/arch/mips/bcm47xx/wgt634u.c diff --git a/target/linux/brcm47xx/patches-3.10/820-wgt634u-nvram-fix.patch b/target/linux/brcm47xx/patches-3.10/820-wgt634u-nvram-fix.patch index 96b6ed84c1..7c90835e43 100644 --- a/target/linux/brcm47xx/patches-3.10/820-wgt634u-nvram-fix.patch +++ b/target/linux/brcm47xx/patches-3.10/820-wgt634u-nvram-fix.patch @@ -7,7 +7,7 @@ out the configuration than the in kernel cfe config reader. +++ b/arch/mips/bcm47xx/Makefile @@ -6,3 +6,4 @@ obj-y += irq.o nvram.o prom.o serial.o setup.o time.o sprom.o - obj-y += board.o + obj-y += board.o buttons.o leds.o obj-y += gpio.o +obj-y += cfe_env.o --- /dev/null diff --git a/target/linux/brcm47xx/patches-3.10/830-huawei_e970_support.patch b/target/linux/brcm47xx/patches-3.10/830-huawei_e970_support.patch index 6534af97e6..92a565f65e 100644 --- a/target/linux/brcm47xx/patches-3.10/830-huawei_e970_support.patch +++ b/target/linux/brcm47xx/patches-3.10/830-huawei_e970_support.patch @@ -1,6 +1,6 @@ --- a/arch/mips/bcm47xx/setup.c +++ b/arch/mips/bcm47xx/setup.c -@@ -34,6 +34,7 @@ +@@ -36,6 +36,7 @@ #include #include #include @@ -8,7 +8,7 @@ #include #include #include -@@ -264,6 +265,33 @@ static struct fixed_phy_status bcm47xx_f +@@ -266,6 +267,33 @@ static struct fixed_phy_status bcm47xx_f .duplex = DUPLEX_FULL, }; @@ -42,15 +42,14 @@ static int __init bcm47xx_register_bus_complete(void) { switch (bcm47xx_bus_type) { -@@ -279,6 +307,8 @@ static int __init bcm47xx_register_bus_c - #endif - } +@@ -284,6 +312,7 @@ static int __init bcm47xx_register_bus_c + bcm47xx_buttons_register(); + bcm47xx_leds_register(); fixed_phy_add(PHY_POLL, 0, &bcm47xx_fixed_phy_status); + bcm47xx_register_gpio_watchdog(); -+ + return 0; } - device_initcall(bcm47xx_register_bus_complete); --- a/arch/mips/configs/bcm47xx_defconfig +++ b/arch/mips/configs/bcm47xx_defconfig @@ -379,6 +379,7 @@ CONFIG_THERMAL=y diff --git a/target/linux/brcm47xx/patches-3.10/980-wnr834b_no_cardbus_invariant.patch b/target/linux/brcm47xx/patches-3.10/980-wnr834b_no_cardbus_invariant.patch index 84be5121d5..650f02f2a1 100644 --- a/target/linux/brcm47xx/patches-3.10/980-wnr834b_no_cardbus_invariant.patch +++ b/target/linux/brcm47xx/patches-3.10/980-wnr834b_no_cardbus_invariant.patch @@ -1,6 +1,6 @@ --- a/arch/mips/bcm47xx/setup.c +++ b/arch/mips/bcm47xx/setup.c -@@ -125,6 +125,10 @@ static int bcm47xx_get_invariants(struct +@@ -127,6 +127,10 @@ static int bcm47xx_get_invariants(struct if (bcm47xx_nvram_getenv("cardbus", buf, sizeof(buf)) >= 0) iv->has_cardbus_slot = !!simple_strtoul(buf, NULL, 10); -- cgit v1.2.3