--- a/arch/mips/ath79/Kconfig +++ b/arch/mips/ath79/Kconfig @@ -76,6 +76,19 @@ config ATH79_MACH_ANTMINER_S3 select ATH79_DEV_USB select ATH79_DEV_WMAC +config ATH79_MACH_ARDUINO_YUN + bool "Arduino Yun" + select SOC_AR933X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + help + Say 'Y' here if you want your kernel to support the + Arduino Yun. + config ATH79_MACH_AP113 bool "Atheros AP113 board support" select SOC_AR724X --- a/arch/mips/ath79/machtypes.h +++ b/arch/mips/ath79/machtypes.h @@ -23,6 +23,7 @@ enum ath79_mach_type { ATH79_MACH_ALL0315N, /* Allnet ALL0315N */ ATH79_MACH_ANTMINER_S1, /* Antminer S1 */ ATH79_MACH_ANTMINER_S3, /* Antminer S3 */ + ATH79_MACH_ARDUINO_YUN, /* Yun */ ATH79_MACH_AP113, /* Atheros AP113 reference board */ ATH79_MACH_AP121, /* Atheros AP121 reference board */ ATH79_MACH_AP121_MINI, /* Atheros AP121-MINI reference board */ --- a/arch/mips/ath79/Makefile +++ b/arch/mips/ath79/Makefile @@ -44,6 +44,7 @@ obj-$(CONFIG_ATH79_MACH_ALL0258N) += mac obj-$(CONFIG_ATH79_MACH_ALL0315N) += mach-all0315n.o obj-$(CONFIG_ATH79_MACH_ANTMINER_S1)+= mach-antminer-s1.o obj-$(CONFIG_ATH79_MACH_ANTMINER_S3)+= mach-antminer-s3.o +obj-$(CONFIG_ATH79_MACH_ARDUINO_YUN) += mach-arduino-yun.o obj-$(CONFIG_ATH79_MACH_AP113) += mach-ap113.o obj-$(CONFIG_ATH79_MACH_AP121) += mach-ap121.o obj-$(CONFIG_ATH79_MACH_AP132) += mach-ap132.o