From 65acc8219d271d29b918ae4d6fe4d520203f25ae Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Fri, 29 Jul 2016 14:48:19 +0200 Subject: [PATCH V3] clk: bcm: Add driver for Northstar ILP clock MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This clock is present on cheaper Northstar devices like BCM53573 or BCM47189 using Corex-A7. ILP is a part of PMU (Power Management Unit) and so it should be defined as one of its subnodes (subdevices). For more details see Documentation entry. Unfortunately there isn't a set of registers related to ILP clock only. We use registers 0x66c, 0x674 and 0x6dc and between them there are e.g. "retention*" and "control_ext" regs. This is why this driver maps all 0x1000 B of space. Signed-off-by: Rafał Miłecki --- V2: Rebase on top of clk-next Use ALP as parent clock Improve comments Switch from ioremap_nocache to ioremap Check of_clk_add_provide result for error V3: Drop #include Make ILP DT entry part of PMU Describe ILP as subdevice of PMU in Documentation --- .../devicetree/bindings/clock/brcm,ns-ilp.txt | 40 ++++++ drivers/clk/bcm/Makefile | 1 + drivers/clk/bcm/clk-ns-ilp.c | 146 +++++++++++++++++++++ 3 files changed, 187 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/brcm,ns-ilp.txt create mode 100644 drivers/clk/bcm/clk-ns-ilp.c --- /dev/null +++ b/Documentation/devicetree/bindings/clock/brcm,ns-ilp.txt @@ -0,0 +1,40 @@ +Broadcom Northstar ILP clock +============================ + +This binding uses the common clock binding: + Documentation/devicetree/bindings/clock/clock-bindings.txt + +This binding is used for ILP clock (sometimes referred as "slow clock") +on Broadcom Northstar devices using Corex-A7 CPU. + +This clock is part of PMU (Power Management Unit), a Broadcom's device +handing power-related aspects. Please note PMU contains more subdevices, +ILP is only one of them. + +ILP's rate has to be calculated on runtime and it depends on ALP clock +which has to be referenced. + +Required properties: +- compatible: "brcm,ns-ilp" +- reg: iomem address range of PMU (Power Management Unit) +- reg-names: "pmu", the only needed & supported reg right now +- clocks: has to reference an ALP clock +- #clock-cells: should be <0> + +Example: + +pmu@18012000 { + compatible = "simple-bus"; + ranges = <0x00000000 0x18012000 0x00001000>; + #address-cells = <1>; + #size-cells = <1>; + + ilp: ilp@0 { + compatible = "brcm,ns-ilp"; + reg = <0 0x1000>; + reg-names = "pmu"; + clocks = <&alp>; + #clock-cells = <0>; + clock-output-names = "ilp"; + }; +}; --- a/drivers/clk/bcm/Makefile +++ b/drivers/clk/bcm/Makefile @@ -8,3 +8,4 @@ obj-$(CONFIG_COMMON_CLK_IPROC) += clk-ns obj-$(CONFIG_ARCH_BCM_CYGNUS) += clk-cygnus.o obj-$(CONFIG_ARCH_BCM_NSP) += clk-nsp.o obj-$(CONFIG_ARCH_BCM_5301X) += clk-nsp.o +obj-$(CONFIG_ARCH_BCM_5301X) += clk-ns-ilp.o --- /dev/null +++ b/drivers/clk/bcm/clk-ns-ilp.c @@ -0,0 +1,146 @@ +/* + * Copyright (C) 2016 Rafał Miłecki + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include + +#define PMU_XTAL_FREQ_RATIO 0x66c +#define XTAL_ALP_PER_4ILP 0x00001fff +#define XTAL_CTL_EN 0x80000000 +#define PMU_SLOW_CLK_PERIOD 0x6dc + +struct ns_ilp { + struct clk *clk; + struct clk_hw hw; + void __iomem *pmu; +}; + +static int ns_ilp_enable(struct clk_hw *hw) +{ + struct ns_ilp *ilp = container_of(hw, struct ns_ilp, hw); + + writel(0x10199, ilp->pmu + PMU_SLOW_CLK_PERIOD); + writel(0x10000, ilp->pmu + 0x674); + + return 0; +} + +static unsigned long ns_ilp_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct ns_ilp *ilp = container_of(hw, struct ns_ilp, hw); + void __iomem *pmu = ilp->pmu; + u32 last_val, cur_val; + u32 sum = 0, num = 0, loop_num = 0; + u32 avg; + + /* Enable measurement */ + writel(XTAL_CTL_EN, pmu + PMU_XTAL_FREQ_RATIO); + + /* Read initial value */ + last_val = readl(pmu + PMU_XTAL_FREQ_RATIO) & XTAL_ALP_PER_4ILP; + + /* + * At minimum we should loop for a bit to let hardware do the + * measurement. This isn't very accurate however, so for a better + * precision lets try getting 20 different values for and use average. + */ + while (num < 20) { + cur_val = readl(pmu + PMU_XTAL_FREQ_RATIO) & XTAL_ALP_PER_4ILP; + + if (cur_val != last_val) { + /* Got different value, use it */ + sum += cur_val; + num++; + loop_num = 0; + last_val = cur_val; + } else if (++loop_num > 5000) { + /* Same value over and over, give up */ + sum += cur_val; + num++; + break; + } + } + + /* Disable measurement to save power */ + writel(0x0, pmu + PMU_XTAL_FREQ_RATIO); + + avg = sum / num; + + return parent_rate * 4 / avg; +} + +static const struct clk_ops ns_ilp_clk_ops = { + .enable = ns_ilp_enable, + .recalc_rate = ns_ilp_recalc_rate, +}; + +static void ns_ilp_init(struct device_node *np) +{ + struct ns_ilp *ilp; + struct resource res; + struct clk_init_data init = { 0 }; + const char *parent_name; + int index; + int err; + + ilp = kzalloc(sizeof(*ilp), GFP_KERNEL); + if (!ilp) + return; + + parent_name = of_clk_get_parent_name(np, 0); + if (!parent_name) { + err = -ENOENT; + goto err_free_ilp; + } + + /* TODO: This looks generic, try making it OF helper. */ + index = of_property_match_string(np, "reg-names", "pmu"); + if (index < 0) { + err = index; + goto err_free_ilp; + } + err = of_address_to_resource(np, index, &res); + if (err) + goto err_free_ilp; + ilp->pmu = ioremap(res.start, resource_size(&res)); + if (IS_ERR(ilp->pmu)) { + err = PTR_ERR(ilp->pmu); + goto err_free_ilp; + } + + init.name = np->name; + init.ops = &ns_ilp_clk_ops; + init.parent_names = &parent_name; + init.num_parents = 1; + + ilp->hw.init = &init; + ilp->clk = clk_register(NULL, &ilp->hw); + if (WARN_ON(IS_ERR(ilp->clk))) + goto err_unmap_pmu; + + err = of_clk_add_provider(np, of_clk_src_simple_get, ilp->clk); + if (err) + goto err_clk_unregister; + + return; + +err_clk_unregister: + clk_unregister(ilp->clk); +err_unmap_pmu: + iounmap(ilp->pmu); +err_free_ilp: + kfree(ilp); + pr_err("Failed to init ILP clock: %d\n", err); +} +CLK_OF_DECLARE(ns_ilp_clk, "brcm,ns-ilp", ns_ilp_init);