aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h1
-rw-r--r--target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig6
-rw-r--r--target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile1
-rw-r--r--target/linux/ramips/files/arch/mips/ralink/rt305x/mach-f5d8235-v2.c141
-rw-r--r--target/linux/ramips/image/Makefile13
-rw-r--r--target/linux/ramips/rt305x/config-2.6.321
-rw-r--r--target/linux/ramips/rt305x/config-2.6.341
7 files changed, 164 insertions, 0 deletions
diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
index 286323fe12..d0aaa6b9c4 100644
--- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
+++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
@@ -21,6 +21,7 @@ enum ramips_mach_type {
RAMIPS_MACH_DIR_300_REVB, /* D-Link DIR-300 rev B */
/* RT3052 based machines */
+ RAMIPS_MACH_F5D8235_V2, /* Belkin F5D8235 v2 */
RAMIPS_MACH_PWH2004, /* Prolink 2004H / Abocom 5205 */
RAMIPS_MACH_WCR150GN, /* Sparklan WCR-150GN */
RAMIPS_MACH_V22RW_2X2, /* Ralink AP-RT3052-V22RW-2X2 */
diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig
index f50328b109..d4087aef48 100644
--- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig
+++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig
@@ -2,6 +2,12 @@ if RALINK_RT305X
menu "Ralink RT350x machine selection"
+config RT305X_MACH_F5D8235_V2
+ bool "Belkin F5D8235 v2 support"
+ default y
+ select RALINK_DEV_GPIO_BUTTONS
+ select RALINK_DEV_GPIO_LEDS
+
config RT305X_MACH_WHR_G300N
bool "Buffalo WHR-G300N support"
default y
diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile
index 75f65700bc..a18a03500f 100644
--- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile
+++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile
@@ -11,6 +11,7 @@ obj-y := irq.o setup.o devices.o rt305x.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+obj-$(CONFIG_RT305X_MACH_F5D8235_V2) += mach-f5d8235-v2.o
obj-$(CONFIG_RT305X_MACH_DIR_300_REVB) += mach-dir-300-revb.o
obj-$(CONFIG_RT305X_MACH_V22RW_2X2) += mach-v22rw-2x2.o
obj-$(CONFIG_RT305X_MACH_WCR150GN) += mach-wcr150gn.o
diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-f5d8235-v2.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-f5d8235-v2.c
new file mode 100644
index 0000000000..6a400424c6
--- /dev/null
+++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-f5d8235-v2.c
@@ -0,0 +1,141 @@
+/*
+ * Belkin F5D8235 v2 board support
+ *
+ * Copyright (C) 2010 Roman Yeryomin <roman@advem.lv>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+#include <linux/rtl8366rb.h>
+
+#include <asm/mach-ralink/machine.h>
+#include <asm/mach-ralink/dev-gpio-buttons.h>
+#include <asm/mach-ralink/dev-gpio-leds.h>
+#include <asm/mach-ralink/rt305x.h>
+#include <asm/mach-ralink/rt305x_regs.h>
+
+#include "devices.h"
+
+#define F5D8235_V2_GPIO_LED_INTERNET_BLUE 5
+#define F5D8235_V2_GPIO_LED_INTERNET_AMBER 6
+#define F5D8235_V2_GPIO_LED_MODEM_BLUE 11
+#define F5D8235_V2_GPIO_LED_MODEM_AMBER 8
+#define F5D8235_V2_GPIO_LED_ROUTER 9
+#define F5D8235_V2_GPIO_LED_STORAGE_BLUE 23
+#define F5D8235_V2_GPIO_LED_STORAGE_AMBER 22
+#define F5D8235_V2_GPIO_LED_SECURITY_BLUE 13
+#define F5D8235_V2_GPIO_LED_SECURITY_AMBER 12
+
+static struct gpio_led f5d8235v2_leds_gpio[] __initdata = {
+ {
+ .name = "f5d8235v2:blue:internet",
+ .gpio = F5D8235_V2_GPIO_LED_INTERNET_BLUE,
+ .active_low = 1,
+ }, {
+ .name = "f5d8235v2:amber:internet",
+ .gpio = F5D8235_V2_GPIO_LED_INTERNET_AMBER,
+ .active_low = 1,
+ }, {
+ .name = "f5d8235v2:blue:modem",
+ .gpio = F5D8235_V2_GPIO_LED_MODEM_BLUE,
+ .active_low = 1,
+ }, {
+ .name = "f5d8235v2:amber:modem",
+ .gpio = F5D8235_V2_GPIO_LED_MODEM_AMBER,
+ .active_low = 1,
+ }, {
+ .name = "f5d8235v2:blue:router",
+ .gpio = F5D8235_V2_GPIO_LED_ROUTER,
+ .active_low = 1,
+ }, {
+ .name = "f5d8235v2:blue:storage",
+ .gpio = F5D8235_V2_GPIO_LED_STORAGE_BLUE,
+ .active_low = 1,
+ }, {
+ .name = "f5d8235v2:amber:storage",
+ .gpio = F5D8235_V2_GPIO_LED_STORAGE_AMBER,
+ .active_low = 1,
+ }, {
+ .name = "f5d8235v2:blue:security",
+ .gpio = F5D8235_V2_GPIO_LED_SECURITY_BLUE,
+ .active_low = 1,
+ }, {
+ .name = "f5d8235v2:amber:security",
+ .gpio = F5D8235_V2_GPIO_LED_SECURITY_AMBER,
+ .active_low = 1,
+ }
+};
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition f5d8235v2_partitions[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = 0x050000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "kernel and rootfs",
+ .offset = 0x050000,
+ .size = 0x790000,
+ }, {
+ .name = "rootfs",
+ .offset = 0x1D0000,
+ .size = 0x610000,
+ }, {
+ .name = "nvram",
+ .offset = 0x7E0000,
+ .size = 0x010000,
+ }, {
+ .name = "factory",
+ .offset = 0x7F0000,
+ .size = 0x010000,
+ }
+};
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static struct physmap_flash_data f5d8235v2_flash_data = {
+#ifdef CONFIG_MTD_PARTITIONS
+ .nr_parts = ARRAY_SIZE(f5d8235v2_partitions),
+ .parts = f5d8235v2_partitions,
+#endif
+};
+
+
+static struct rtl8366rb_platform_data f5d8235v2_switch_data = {
+ .gpio_sda = RT305X_GPIO_I2C_SD,
+ .gpio_sck = RT305X_GPIO_I2C_SCLK,
+};
+
+static struct platform_device f5d8235v2_switch = {
+ .name = RTL8366RB_DRIVER_NAME,
+ .id = -1,
+ .dev = {
+ .platform_data = &f5d8235v2_switch_data,
+ }
+};
+
+static void __init f5d8235v2_init(void)
+{
+ rt305x_gpio_init((RT305X_GPIO_MODE_GPIO <<
+ RT305X_GPIO_MODE_UART0_SHIFT) |
+ RT305X_GPIO_MODE_I2C |
+ RT305X_GPIO_MODE_SPI |
+ RT305X_GPIO_MODE_MDIO);
+ rt305x_register_flash(0, &f5d8235v2_flash_data);
+ ramips_register_gpio_leds(-1, ARRAY_SIZE(f5d8235v2_leds_gpio),
+ f5d8235v2_leds_gpio);
+ rt305x_register_ethernet();
+ platform_device_register(&f5d8235v2_switch);
+ rt305x_register_wifi();
+}
+
+MIPS_MACHINE(RAMIPS_MACH_F5D8235_V2, "F5D8235_V2", "Belkin F5D8235 v2",
+ f5d8235v2_init);
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index acd328317c..79809de9fd 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -113,6 +113,18 @@ define Image/Build/Profile/WCR150GN
endef
+mtdlayout_f5d8235=mtdparts=physmap-flash.0:320k(u-boot)ro,1536k(kernel),6208k(rootfs),64k(nvram),64k(factory),7744k@0x50000(firmware)
+mtd_f5d8235_kernel_part_size=1572864
+mtd_f5d8235_rootfs_part_size=6356992
+define Image/Build/Template/F5D8235V2
+ $(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_f5d8235,$(mtd_f5d8235_kernel_part_size),$(mtd_f5d8235_rootfs_part_size))
+endef
+
+define Image/Build/Profile/F5D8235V2
+ $(call Image/Build/Template/F5D8235V2,$(1),f5d8235v2,F5D8235_V2)
+endef
+
+
ifeq ($(CONFIG_RALINK_RT305X),y)
define Image/Build/Profile/Default
$(call Image/Build/Profile/DIR300B1,$(1))
@@ -121,6 +133,7 @@ define Image/Build/Profile/Default
$(call Image/Build/Profile/PWH2004,$(1))
$(call Image/Build/Profile/WHRG300N,$(1))
$(call Image/Build/Profile/WCR150GN,$(1))
+ $(call Image/Build/Profile/F5D8235V2,$(1))
endef
endif
diff --git a/target/linux/ramips/rt305x/config-2.6.32 b/target/linux/ramips/rt305x/config-2.6.32
index 1d29c914f7..05388b296d 100644
--- a/target/linux/ramips/rt305x/config-2.6.32
+++ b/target/linux/ramips/rt305x/config-2.6.32
@@ -117,6 +117,7 @@ CONFIG_RALINK_DEV_GPIO_LEDS=y
# CONFIG_RALINK_RT288X is not set
CONFIG_RALINK_RT305X=y
CONFIG_RT305X_MACH_DIR_300_REVB=y
+CONFIG_RT305X_MACH_F5D8235_V2=y
CONFIG_RT305X_MACH_FONERA20N=y
CONFIG_RT305X_MACH_V22RW_2X2=y
CONFIG_RT305X_MACH_PWH2004=y
diff --git a/target/linux/ramips/rt305x/config-2.6.34 b/target/linux/ramips/rt305x/config-2.6.34
index 91b7e56426..b677856b6b 100644
--- a/target/linux/ramips/rt305x/config-2.6.34
+++ b/target/linux/ramips/rt305x/config-2.6.34
@@ -127,6 +127,7 @@ CONFIG_RALINK_DEV_GPIO_LEDS=y
# CONFIG_RALINK_RT288X is not set
CONFIG_RALINK_RT305X=y
CONFIG_RT305X_MACH_DIR_300_REVB=y
+CONFIG_RT305X_MACH_F5D8235_V2=y
CONFIG_RT305X_MACH_FONERA20N=y
CONFIG_RT305X_MACH_V22RW_2X2=y
CONFIG_RT305X_MACH_PWH2004=y