diff options
Diffstat (limited to 'target/linux/brcm63xx/patches-3.9')
21 files changed, 953 insertions, 7 deletions
diff --git a/target/linux/brcm63xx/patches-3.9/100-MIPS-bmips-fix-compilation-for-BMIPS5000.patch b/target/linux/brcm63xx/patches-3.9/100-MIPS-bmips-fix-compilation-for-BMIPS5000.patch new file mode 100644 index 0000000000..6f4763420b --- /dev/null +++ b/target/linux/brcm63xx/patches-3.9/100-MIPS-bmips-fix-compilation-for-BMIPS5000.patch @@ -0,0 +1,67 @@ +From d55975b74389b2cf1a38732062ff89303940f6e1 Mon Sep 17 00:00:00 2001 +From: Jonas Gorski <jogo@openwrt.org> +Date: Sat, 29 Jun 2013 11:46:56 +0200 +Subject: [PATCH 01/10] MIPS: bmips: fix compilation for BMIPS5000 + +Replace the macro names in strings with actual macro invocation. + +Fixes the following build error: + + CC arch/mips/kernel/smp-bmips.o +{standard input}: Assembler messages: +{standard input}:951: Error: Unrecognized opcode `_ssnop' +{standard input}:952: Error: Unrecognized opcode `_ssnop' +(...) +make[6]: *** [arch/mips/kernel/smp-bmips.o] Error 1 + +Signed-off-by: Jonas Gorski <jogo@openwrt.org> +--- + arch/mips/include/asm/bmips.h | 28 ++++++++++++++-------------- + 1 file changed, 14 insertions(+), 14 deletions(-) + +--- a/arch/mips/include/asm/bmips.h ++++ b/arch/mips/include/asm/bmips.h +@@ -70,15 +70,15 @@ static inline unsigned long bmips_read_z + ".set noreorder\n" + "cache %1, 0(%2)\n" + "sync\n" +- "_ssnop\n" +- "_ssnop\n" +- "_ssnop\n" +- "_ssnop\n" +- "_ssnop\n" +- "_ssnop\n" +- "_ssnop\n" ++ __stringify(___ssnop) "\n" ++ __stringify(___ssnop) "\n" ++ __stringify(___ssnop) "\n" ++ __stringify(___ssnop) "\n" ++ __stringify(___ssnop) "\n" ++ __stringify(___ssnop) "\n" ++ __stringify(___ssnop) "\n" + "mfc0 %0, $28, 3\n" +- "_ssnop\n" ++ __stringify(___ssnop) "\n" + ".set pop\n" + : "=&r" (ret) + : "i" (Index_Load_Tag_S), "r" (ZSCM_REG_BASE + offset) +@@ -92,13 +92,13 @@ static inline void bmips_write_zscm_reg( + ".set push\n" + ".set noreorder\n" + "mtc0 %0, $28, 3\n" +- "_ssnop\n" +- "_ssnop\n" +- "_ssnop\n" ++ __stringify(___ssnop) "\n" ++ __stringify(___ssnop) "\n" ++ __stringify(___ssnop) "\n" + "cache %1, 0(%2)\n" +- "_ssnop\n" +- "_ssnop\n" +- "_ssnop\n" ++ __stringify(___ssnop) "\n" ++ __stringify(___ssnop) "\n" ++ __stringify(___ssnop) "\n" + : /* no outputs */ + : "r" (data), + "i" (Index_Store_Tag_S), "r" (ZSCM_REG_BASE + offset) diff --git a/target/linux/brcm63xx/patches-3.9/101-MIPS-allow-asm-cpu.h-to-be-included-from-assembly.patch b/target/linux/brcm63xx/patches-3.9/101-MIPS-allow-asm-cpu.h-to-be-included-from-assembly.patch new file mode 100644 index 0000000000..27c3b9eea5 --- /dev/null +++ b/target/linux/brcm63xx/patches-3.9/101-MIPS-allow-asm-cpu.h-to-be-included-from-assembly.patch @@ -0,0 +1,31 @@ +From 520f4bf75026cc60ba47946331966fb670b39cb0 Mon Sep 17 00:00:00 2001 +From: Jonas Gorski <jogo@openwrt.org> +Date: Thu, 27 Jun 2013 21:32:41 +0200 +Subject: [PATCH 02/10] MIPS: allow asm/cpu.h to be included from assembly + +Add guards around the enum to allow including cpu.h from assembly. + +Signed-off-by: Jonas Gorski <jogo@openwrt.org> +--- + arch/mips/include/asm/cpu.h | 3 +++ + 1 file changed, 3 insertions(+) + +--- a/arch/mips/include/asm/cpu.h ++++ b/arch/mips/include/asm/cpu.h +@@ -225,6 +225,8 @@ + + #define FPIR_IMP_NONE 0x0000 + ++#if !defined(__ASSEMBLY__) ++ + enum cpu_type_enum { + CPU_UNKNOWN, + +@@ -277,6 +279,7 @@ enum cpu_type_enum { + CPU_LAST + }; + ++#endif /* !__ASSEMBLY */ + + /* + * ISA Level encodings diff --git a/target/linux/brcm63xx/patches-3.9/102-MIPS-bmips-add-macros-for-testing-the-current-bmips-.patch b/target/linux/brcm63xx/patches-3.9/102-MIPS-bmips-add-macros-for-testing-the-current-bmips-.patch new file mode 100644 index 0000000000..af38b35689 --- /dev/null +++ b/target/linux/brcm63xx/patches-3.9/102-MIPS-bmips-add-macros-for-testing-the-current-bmips-.patch @@ -0,0 +1,36 @@ +From 971b8b3d5101b3bb868e63f3eb96fe69b7110c61 Mon Sep 17 00:00:00 2001 +From: Jonas Gorski <jogo@openwrt.org> +Date: Thu, 27 Jun 2013 12:40:15 +0200 +Subject: [PATCH 03/10] MIPS: bmips: add macros for testing the current bmips + CPU + +Makes it easy to make code conditionally compiled for supported CPUs +without directly relying on #ifdefs. + +Signed-off-by: Jonas Gorski <jogo@openwrt.org> +--- + arch/mips/include/asm/bmips.h | 11 +++++++++++ + 1 file changed, 11 insertions(+) + +--- a/arch/mips/include/asm/bmips.h ++++ b/arch/mips/include/asm/bmips.h +@@ -45,8 +45,19 @@ + #if !defined(__ASSEMBLY__) + + #include <linux/cpumask.h> ++#include <asm/cpu-features.h> + #include <asm/r4kcache.h> + ++#define cpu_is_bmips32() (current_cpu_type() == CPU_BMIPS32) ++#define cpu_is_bmips3300() (IS_ENABLED(CONFIG_CPU_BMIPS3300) && \ ++ current_cpu_type() == CPU_BMIPS3300) ++#define cpu_is_bmips4350() (IS_ENABLED(CONFIG_CPU_BMIPS4350) && \ ++ current_cpu_type() == CPU_BMIPS4350) ++#define cpu_is_bmips4380() (IS_ENABLED(CONFIG_CPU_BMIPS4380) && \ ++ current_cpu_type() == CPU_BMIPS4380) ++#define cpu_is_bmips5000() (IS_ENABLED(CONFIG_CPU_BMIPS5000) && \ ++ current_cpu_type() == CPU_BMIPS5000) ++ + extern struct plat_smp_ops bmips_smp_ops; + extern char bmips_reset_nmi_vec; + extern char bmips_reset_nmi_vec_end; diff --git a/target/linux/brcm63xx/patches-3.9/103-MIPS-bmips-change-compile-time-checks-to-runtime-che.patch b/target/linux/brcm63xx/patches-3.9/103-MIPS-bmips-change-compile-time-checks-to-runtime-che.patch new file mode 100644 index 0000000000..d55189529e --- /dev/null +++ b/target/linux/brcm63xx/patches-3.9/103-MIPS-bmips-change-compile-time-checks-to-runtime-che.patch @@ -0,0 +1,482 @@ +From 12594762fcbec024cb424c9b77efb28402651667 Mon Sep 17 00:00:00 2001 +From: Jonas Gorski <jogo@openwrt.org> +Date: Thu, 27 Jun 2013 21:33:56 +0200 +Subject: [PATCH 04/10] MIPS: bmips: change compile time checks to runtime + checks + +Allow building for all bmips cpus at the same time by changing ifdefs +to checks for the cpu type, or adding appropriate checks to the +assembly. + +Signed-off-by: Jonas Gorski <jogo@openwrt.org> +--- + arch/mips/kernel/bmips_vec.S | 55 +++++++--- + arch/mips/kernel/smp-bmips.c | 241 ++++++++++++++++++++++-------------------- + 2 files changed, 172 insertions(+), 124 deletions(-) + +--- a/arch/mips/kernel/bmips_vec.S ++++ b/arch/mips/kernel/bmips_vec.S +@@ -13,6 +13,7 @@ + #include <asm/asm.h> + #include <asm/asmmacro.h> + #include <asm/cacheops.h> ++#include <asm/cpu.h> + #include <asm/regdef.h> + #include <asm/mipsregs.h> + #include <asm/stackframe.h> +@@ -89,12 +90,18 @@ NESTED(bmips_reset_nmi_vec, PT_SIZE, sp) + beqz k0, bmips_smp_entry + + #if defined(CONFIG_CPU_BMIPS5000) ++ mfc0 k0, CP0_PRID ++ li k1, PRID_IMP_BMIPS5000 ++ andi k0, 0xff00 ++ bne k0, k1, 1f ++ + /* if we're not on core 0, this must be the SMP boot signal */ + li k1, (3 << 25) + mfc0 k0, $22 + and k0, k1 + bnez k0, bmips_smp_entry +-#endif ++1: ++#endif /* CONFIG_CPU_BMIPS5000 */ + #endif /* CONFIG_SMP */ + + /* nope, it's just a regular NMI */ +@@ -137,7 +144,12 @@ bmips_smp_entry: + xori k0, 0x04 + mtc0 k0, CP0_CONFIG + ++ mfc0 k0, CP0_PRID ++ andi k0, 0xff00 + #if defined(CONFIG_CPU_BMIPS4350) || defined(CONFIG_CPU_BMIPS4380) ++ li k1, PRID_IMP_BMIPS43XX ++ bne k0, k1, 2f ++ + /* initialize CPU1's local I-cache */ + li k0, 0x80000000 + li k1, 0x80010000 +@@ -148,14 +160,21 @@ bmips_smp_entry: + 1: cache Index_Store_Tag_I, 0(k0) + addiu k0, 16 + bne k0, k1, 1b +-#elif defined(CONFIG_CPU_BMIPS5000) ++ ++ b 3f ++2: ++#endif /* CONFIG_CPU_BMIPS4350 || CONFIG_CPU_BMIPS4380 */ ++#if defined(CONFIG_CPU_BMIPS5000) + /* set exception vector base */ ++ li k1, PRID_IMP_BMIPS5000 ++ bne k0, k1, 3f ++ + la k0, ebase + lw k0, 0(k0) + mtc0 k0, $15, 1 + BARRIER +-#endif +- ++#endif /* CONFIG_CPU_BMIPS5000 */ ++3: + /* jump back to kseg0 in case we need to remap the kseg1 area */ + la k0, 1f + jr k0 +@@ -221,8 +240,18 @@ END(bmips_smp_int_vec) + LEAF(bmips_enable_xks01) + + #if defined(CONFIG_XKS01) +- ++ mfc0 t0, CP0_PRID ++ andi t2, t0, 0xff00 + #if defined(CONFIG_CPU_BMIPS4380) ++ li t1, PRID_IMP_BMIPS43XX ++ bne t2, t1, 1f ++ ++ andi t0, 0xff ++ addiu t1, t0, -PRID_REV_BMIPS4380_HI ++ bgtz t1, 2f ++ addiu t0, -PRID_REV_BMIPS4380_LO ++ bltz t0, 2f ++ + mfc0 t0, $22, 3 + li t1, 0x1ff0 + li t2, (1 << 12) | (1 << 9) +@@ -231,7 +260,13 @@ LEAF(bmips_enable_xks01) + or t0, t2 + mtc0 t0, $22, 3 + BARRIER +-#elif defined(CONFIG_CPU_BMIPS5000) ++ b 2f ++1: ++#endif /* CONFIG_CPU_BMIPS4380 */ ++#if defined(CONFIG_CPU_BMIPS5000) ++ li t1, PRID_IMP_BMIPS5000 ++ bne t2, t1, 2f ++ + mfc0 t0, $22, 5 + li t1, 0x01ff + li t2, (1 << 8) | (1 << 5) +@@ -240,12 +275,8 @@ LEAF(bmips_enable_xks01) + or t0, t2 + mtc0 t0, $22, 5 + BARRIER +-#else +- +-#error Missing XKS01 setup +- +-#endif +- ++#endif /* CONFIG_CPU_BMIPS5000 */ ++2: + #endif /* defined(CONFIG_XKS01) */ + + jr ra +--- a/arch/mips/kernel/smp-bmips.c ++++ b/arch/mips/kernel/smp-bmips.c +@@ -49,8 +49,11 @@ cpumask_t bmips_booted_mask; + unsigned long bmips_smp_boot_sp; + unsigned long bmips_smp_boot_gp; + ++static void bmips43xx_send_ipi_single(int cpu, unsigned int action); ++static void bmips5000_send_ipi_single(int cpu, unsigned int action); + static void bmips_send_ipi_single(int cpu, unsigned int action); +-static irqreturn_t bmips_ipi_interrupt(int irq, void *dev_id); ++static irqreturn_t bmips43xx_ipi_interrupt(int irq, void *dev_id); ++static irqreturn_t bmips5000_ipi_interrupt(int irq, void *dev_id); + + /* SW interrupts 0,1 are used for interprocessor signaling */ + #define IPI0_IRQ (MIPS_CPU_IRQ_BASE + 0) +@@ -65,48 +68,49 @@ static void __init bmips_smp_setup(void) + { + int i, cpu = 1, boot_cpu = 0; + +-#if defined(CONFIG_CPU_BMIPS4350) || defined(CONFIG_CPU_BMIPS4380) +- /* arbitration priority */ +- clear_c0_brcm_cmt_ctrl(0x30); +- +- /* NBK and weak order flags */ +- set_c0_brcm_config_0(0x30000); +- +- /* Find out if we are running on TP0 or TP1 */ +- boot_cpu = !!(read_c0_brcm_cmt_local() & (1 << 31)); +- +- /* +- * MIPS interrupts 0,1 (SW INT 0,1) cross over to the other thread +- * MIPS interrupt 2 (HW INT 0) is the CPU0 L1 controller output +- * MIPS interrupt 3 (HW INT 1) is the CPU1 L1 controller output +- * +- * If booting from TP1, leave the existing CMT interrupt routing +- * such that TP0 responds to SW1 and TP1 responds to SW0. +- */ +- if (boot_cpu == 0) +- change_c0_brcm_cmt_intr(0xf8018000, ++ if (cpu_is_bmips4350() || cpu_is_bmips4380()) { ++ /* arbitration priority */ ++ clear_c0_brcm_cmt_ctrl(0x30); ++ ++ /* NBK and weak order flags */ ++ set_c0_brcm_config_0(0x30000); ++ ++ /* Find out if we are running on TP0 or TP1 */ ++ boot_cpu = !!(read_c0_brcm_cmt_local() & (1 << 31)); ++ ++ /* ++ * MIPS interrupts 0,1 (SW INT 0,1) cross over to the other ++ * thread ++ * MIPS interrupt 2 (HW INT 0) is the CPU0 L1 controller output ++ * MIPS interrupt 3 (HW INT 1) is the CPU1 L1 controller output ++ * ++ * If booting from TP1, leave the existing CMT interrupt routing ++ * such that TP0 responds to SW1 and TP1 responds to SW0. ++ */ ++ if (boot_cpu == 0) ++ change_c0_brcm_cmt_intr(0xf8018000, + (0x02 << 27) | (0x03 << 15)); +- else +- change_c0_brcm_cmt_intr(0xf8018000, (0x1d << 27)); +- +- /* single core, 2 threads (2 pipelines) */ +- max_cpus = 2; +-#elif defined(CONFIG_CPU_BMIPS5000) +- /* enable raceless SW interrupts */ +- set_c0_brcm_config(0x03 << 22); +- +- /* route HW interrupt 0 to CPU0, HW interrupt 1 to CPU1 */ +- change_c0_brcm_mode(0x1f << 27, 0x02 << 27); ++ else ++ change_c0_brcm_cmt_intr(0xf8018000, (0x1d << 27)); + +- /* N cores, 2 threads per core */ +- max_cpus = (((read_c0_brcm_config() >> 6) & 0x03) + 1) << 1; +- +- /* clear any pending SW interrupts */ +- for (i = 0; i < max_cpus; i++) { +- write_c0_brcm_action(ACTION_CLR_IPI(i, 0)); +- write_c0_brcm_action(ACTION_CLR_IPI(i, 1)); ++ /* single core, 2 threads (2 pipelines) */ ++ max_cpus = 2; ++ } else if (cpu_is_bmips5000()) { ++ /* enable raceless SW interrupts */ ++ set_c0_brcm_config(0x03 << 22); ++ ++ /* route HW interrupt 0 to CPU0, HW interrupt 1 to CPU1 */ ++ change_c0_brcm_mode(0x1f << 27, 0x02 << 27); ++ ++ /* N cores, 2 threads per core */ ++ max_cpus = (((read_c0_brcm_config() >> 6) & 0x03) + 1) << 1; ++ ++ /* clear any pending SW interrupts */ ++ for (i = 0; i < max_cpus; i++) { ++ write_c0_brcm_action(ACTION_CLR_IPI(i, 0)); ++ write_c0_brcm_action(ACTION_CLR_IPI(i, 1)); ++ } + } +-#endif + + if (!bmips_smp_enabled) + max_cpus = 1; +@@ -134,6 +138,15 @@ static void __init bmips_smp_setup(void) + */ + static void bmips_prepare_cpus(unsigned int max_cpus) + { ++ irqreturn_t (*bmips_ipi_interrupt)(int irq, void *dev_id); ++ ++ if (cpu_is_bmips4350() || cpu_is_bmips4380()) ++ bmips_ipi_interrupt = bmips43xx_ipi_interrupt; ++ else if (cpu_is_bmips5000()) ++ bmips_ipi_interrupt = bmips5000_ipi_interrupt; ++ else ++ return; ++ + if (request_irq(IPI0_IRQ, bmips_ipi_interrupt, IRQF_PERCPU, + "smp_ipi0", NULL)) + panic("Can't request IPI0 interrupt\n"); +@@ -168,26 +181,26 @@ static void bmips_boot_secondary(int cpu + + pr_info("SMP: Booting CPU%d...\n", cpu); + +- if (cpumask_test_cpu(cpu, &bmips_booted_mask)) ++ if (cpumask_test_cpu(cpu, &bmips_booted_mask)) { + bmips_send_ipi_single(cpu, 0); +- else { +-#if defined(CONFIG_CPU_BMIPS4350) || defined(CONFIG_CPU_BMIPS4380) +- /* Reset slave TP1 if booting from TP0 */ +- if (cpu_logical_map(cpu) == 0) +- set_c0_brcm_cmt_ctrl(0x01); +-#elif defined(CONFIG_CPU_BMIPS5000) +- if (cpu & 0x01) +- write_c0_brcm_action(ACTION_BOOT_THREAD(cpu)); +- else { +- /* +- * core N thread 0 was already booted; just +- * pulse the NMI line +- */ +- bmips_write_zscm_reg(0x210, 0xc0000000); +- udelay(10); +- bmips_write_zscm_reg(0x210, 0x00); ++ } else { ++ if (cpu_is_bmips4350() || cpu_is_bmips4380()) { ++ /* Reset slave TP1 if booting from TP0 */ ++ if (cpu_logical_map(cpu) == 0) ++ set_c0_brcm_cmt_ctrl(0x01); ++ } else if (cpu_is_bmips5000()) { ++ if (cpu & 0x01) ++ write_c0_brcm_action(ACTION_BOOT_THREAD(cpu)); ++ else { ++ /* ++ * core N thread 0 was already booted; just ++ * pulse the NMI line ++ */ ++ bmips_write_zscm_reg(0x210, 0xc0000000); ++ udelay(10); ++ bmips_write_zscm_reg(0x210, 0x00); ++ } + } +-#endif + cpumask_set_cpu(cpu, &bmips_booted_mask); + } + } +@@ -199,20 +212,21 @@ static void bmips_init_secondary(void) + { + /* move NMI vector to kseg0, in case XKS01 is enabled */ + +-#if defined(CONFIG_CPU_BMIPS4350) || defined(CONFIG_CPU_BMIPS4380) +- void __iomem *cbr = BMIPS_GET_CBR(); +- unsigned long old_vec; +- +- old_vec = __raw_readl(cbr + BMIPS_RELO_VECTOR_CONTROL_1); +- __raw_writel(old_vec & ~0x20000000, cbr + BMIPS_RELO_VECTOR_CONTROL_1); +- +- clear_c0_cause(smp_processor_id() ? C_SW1 : C_SW0); +-#elif defined(CONFIG_CPU_BMIPS5000) +- write_c0_brcm_bootvec(read_c0_brcm_bootvec() & +- (smp_processor_id() & 0x01 ? ~0x20000000 : ~0x2000)); ++ if (cpu_is_bmips4350() || cpu_is_bmips4380()) { ++ void __iomem *cbr = BMIPS_GET_CBR(); ++ unsigned long old_vec; ++ ++ old_vec = __raw_readl(cbr + BMIPS_RELO_VECTOR_CONTROL_1); ++ __raw_writel(old_vec & ~0x20000000, ++ cbr + BMIPS_RELO_VECTOR_CONTROL_1); ++ ++ clear_c0_cause(smp_processor_id() ? C_SW1 : C_SW0); ++ } else if (cpu_is_bmips5000()) { ++ write_c0_brcm_bootvec(read_c0_brcm_bootvec() & ++ (smp_processor_id() & 0x01 ? ~0x20000000 : ~0x2000)); + +- write_c0_brcm_action(ACTION_CLR_IPI(smp_processor_id(), 0)); +-#endif ++ write_c0_brcm_action(ACTION_CLR_IPI(smp_processor_id(), 0)); ++ } + } + + /* +@@ -237,8 +251,6 @@ static void bmips_cpus_done(void) + { + } + +-#if defined(CONFIG_CPU_BMIPS5000) +- + /* + * BMIPS5000 raceless IPIs + * +@@ -247,12 +259,12 @@ static void bmips_cpus_done(void) + * IPI1 is used for SMP_CALL_FUNCTION + */ + +-static void bmips_send_ipi_single(int cpu, unsigned int action) ++static void bmips5000_send_ipi_single(int cpu, unsigned int action) + { + write_c0_brcm_action(ACTION_SET_IPI(cpu, action == SMP_CALL_FUNCTION)); + } + +-static irqreturn_t bmips_ipi_interrupt(int irq, void *dev_id) ++static irqreturn_t bmips5000_ipi_interrupt(int irq, void *dev_id) + { + int action = irq - IPI0_IRQ; + +@@ -266,8 +278,6 @@ static irqreturn_t bmips_ipi_interrupt(i + return IRQ_HANDLED; + } + +-#else +- + /* + * BMIPS43xx racey IPIs + * +@@ -281,7 +291,7 @@ static irqreturn_t bmips_ipi_interrupt(i + static DEFINE_SPINLOCK(ipi_lock); + static DEFINE_PER_CPU(int, ipi_action_mask); + +-static void bmips_send_ipi_single(int cpu, unsigned int action) ++static void bmips43xx_send_ipi_single(int cpu, unsigned int action) + { + unsigned long flags; + +@@ -292,7 +302,7 @@ static void bmips_send_ipi_single(int cp + spin_unlock_irqrestore(&ipi_lock, flags); + } + +-static irqreturn_t bmips_ipi_interrupt(int irq, void *dev_id) ++static irqreturn_t bmips43xx_ipi_interrupt(int irq, void *dev_id) + { + unsigned long flags; + int action, cpu = irq - IPI0_IRQ; +@@ -311,7 +321,13 @@ static irqreturn_t bmips_ipi_interrupt(i + return IRQ_HANDLED; + } + +-#endif /* BMIPS type */ ++static void bmips_send_ipi_single(int cpu, unsigned int action) ++{ ++ if (cpu_is_bmips4350() || cpu_is_bmips4380()) ++ bmips43xx_send_ipi_single(cpu, action); ++ else if (cpu_is_bmips5000()) ++ bmips5000_send_ipi_single(cpu, action); ++} + + static void bmips_send_ipi_mask(const struct cpumask *mask, + unsigned int action) +@@ -421,43 +437,44 @@ void __cpuinit bmips_ebase_setup(void) + + BUG_ON(ebase != CKSEG0); + +-#if defined(CONFIG_CPU_BMIPS4350) +- /* +- * BMIPS4350 cannot relocate the normal vectors, but it +- * can relocate the BEV=1 vectors. So CPU1 starts up at +- * the relocated BEV=1, IV=0 general exception vector @ +- * 0xa000_0380. +- * +- * set_uncached_handler() is used here because: +- * - CPU1 will run this from uncached space +- * - None of the cacheflush functions are set up yet +- */ +- set_uncached_handler(BMIPS_WARM_RESTART_VEC - CKSEG0, +- &bmips_smp_int_vec, 0x80); +- __sync(); +- return; +-#elif defined(CONFIG_CPU_BMIPS4380) +- /* +- * 0x8000_0000: reset/NMI (initially in kseg1) +- * 0x8000_0400: normal vectors +- */ +- new_ebase = 0x80000400; +- cbr = BMIPS_GET_CBR(); +- __raw_writel(0x80080800, cbr + BMIPS_RELO_VECTOR_CONTROL_0); +- __raw_writel(0xa0080800, cbr + BMIPS_RELO_VECTOR_CONTROL_1); +-#elif defined(CONFIG_CPU_BMIPS5000) +- /* +- * 0x8000_0000: reset/NMI (initially in kseg1) +- * 0x8000_1000: normal vectors +- */ +- new_ebase = 0x80001000; +- write_c0_brcm_bootvec(0xa0088008); +- write_c0_ebase(new_ebase); +- if (max_cpus > 2) +- bmips_write_zscm_reg(0xa0, 0xa008a008); +-#else +- return; +-#endif ++ if (cpu_is_bmips4350()) { ++ /* ++ * BMIPS4350 cannot relocate the normal vectors, but it ++ * can relocate the BEV=1 vectors. So CPU1 starts up at ++ * the relocated BEV=1, IV=0 general exception vector @ ++ * 0xa000_0380. ++ * ++ * set_uncached_handler() is used here because: ++ * - CPU1 will run this from uncached space ++ * - None of the cacheflush functions are set up yet ++ */ ++ set_uncached_handler(BMIPS_WARM_RESTART_VEC - CKSEG0, ++ &bmips_smp_int_vec, 0x80); ++ __sync(); ++ return; ++ } else if (cpu_is_bmips4380()) { ++ /* ++ * 0x8000_0000: reset/NMI (initially in kseg1) ++ * 0x8000_0400: normal vectors ++ */ ++ new_ebase = 0x80000400; ++ cbr = BMIPS_GET_CBR(); ++ __raw_writel(0x80080800, cbr + BMIPS_RELO_VECTOR_CONTROL_0); ++ __raw_writel(0xa0080800, cbr + BMIPS_RELO_VECTOR_CONTROL_1); ++ } else if (cpu_is_bmips5000()) { ++ /* ++ * 0x8000_0000: reset/NMI (initially in kseg1) ++ * 0x8000_1000: normal vectors ++ */ ++ new_ebase = 0x80001000; ++ write_c0_brcm_bootvec(0xa0088008); ++ write_c0_ebase(new_ebase); ++ if (max_cpus > 2) ++ bmips_write_zscm_reg(0xa0, 0xa008a008); ++ } else { ++ return; ++ } ++ + board_nmi_handler_setup = &bmips_nmi_handler_setup; + ebase = new_ebase; + } diff --git a/target/linux/brcm63xx/patches-3.9/104-MIPS-bmips-merge-CPU-options-into-one-option.patch b/target/linux/brcm63xx/patches-3.9/104-MIPS-bmips-merge-CPU-options-into-one-option.patch new file mode 100644 index 0000000000..386c63c1ae --- /dev/null +++ b/target/linux/brcm63xx/patches-3.9/104-MIPS-bmips-merge-CPU-options-into-one-option.patch @@ -0,0 +1,126 @@ +From 1ecac776e6c652e3059d4f4d9dd8369e89ebef81 Mon Sep 17 00:00:00 2001 +From: Jonas Gorski <jogo@openwrt.org> +Date: Thu, 27 Jun 2013 23:57:20 +0200 +Subject: [PATCH 05/10] MIPS: bmips: merge CPU options into one option + +Instead of treating each flavour as an exclusive CPU to select, make +BMIPS the only option and let SYS_HAS_CPU_BMIPS* decide for which +flavours to include support. + +Run tested on BMIPS3300 and BMIPS4350, only build tested for BMIPS4380 +and BMISP5000. + +Signed-off-by: Jonas Gorski <jogo@openwrt.org> +--- + arch/mips/Kconfig | 77 +++++++++++++++++++++++++---------------------------- + 1 file changed, 36 insertions(+), 41 deletions(-) + +--- a/arch/mips/Kconfig ++++ b/arch/mips/Kconfig +@@ -130,6 +130,7 @@ config BCM63XX + select DMA_NONCOHERENT + select IRQ_CPU + select SYS_HAS_CPU_MIPS32_R1 ++ select SYS_HAS_CPU_BMIPS + select SYS_HAS_CPU_BMIPS4350 if !BCM63XX_CPU_6338 && !BCM63XX_CPU_6345 && !BCM63XX_CPU_6348 + select NR_CPUS_DEFAULT_2 + select SYS_SUPPORTS_32BIT_KERNEL +@@ -1454,41 +1455,21 @@ config CPU_CAVIUM_OCTEON + can have up to 16 Mips64v2 cores and 8 integrated gigabit ethernets. + Full details can be found at http://www.caviumnetworks.com. + +-config CPU_BMIPS3300 +- bool "BMIPS3300" +- depends on SYS_HAS_CPU_BMIPS3300 +- select CPU_BMIPS +- help +- Broadcom BMIPS3300 processors. +- +-config CPU_BMIPS4350 +- bool "BMIPS4350" +- depends on SYS_HAS_CPU_BMIPS4350 +- select CPU_BMIPS +- select SYS_SUPPORTS_SMP +- select SYS_SUPPORTS_HOTPLUG_CPU +- help +- Broadcom BMIPS4350 ("VIPER") processors. +- +-config CPU_BMIPS4380 +- bool "BMIPS4380" +- depends on SYS_HAS_CPU_BMIPS4380 +- select CPU_BMIPS +- select SYS_SUPPORTS_SMP +- select SYS_SUPPORTS_HOTPLUG_CPU +- help +- Broadcom BMIPS4380 processors. +- +-config CPU_BMIPS5000 +- bool "BMIPS5000" +- depends on SYS_HAS_CPU_BMIPS5000 +- select CPU_BMIPS +- select CPU_SUPPORTS_HIGHMEM +- select MIPS_CPU_SCACHE +- select SYS_SUPPORTS_SMP +- select SYS_SUPPORTS_HOTPLUG_CPU ++config CPU_BMIPS ++ bool "Broadcom BMIPS" ++ depends on SYS_HAS_CPU_BMIPS ++ select CPU_MIPS32 ++ select CPU_BMIPS3300 if SYS_HAS_CPU_BMIPS3300 ++ select CPU_BMIPS4350 if SYS_HAS_CPU_BMIPS4350 ++ select CPU_BMIPS4350 if SYS_HAS_CPU_BMIPS4380 ++ select CPU_BMIPS5000 if SYS_HAS_CPU_BMIPS5000 ++ select CPU_SUPPORTS_32BIT_KERNEL ++ select DMA_NONCOHERENT ++ select IRQ_CPU ++ select SWAP_IO_SPACE ++ select WEAK_ORDERING + help +- Broadcom BMIPS5000 processors. ++ Support for BMIPS3300/4350/4380 and BMIPS5000 processors. + + config CPU_XLR + bool "Netlogic XLR SoC" +@@ -1569,14 +1550,25 @@ config CPU_LOONGSON1 + select CPU_SUPPORTS_32BIT_KERNEL + select CPU_SUPPORTS_HIGHMEM + +-config CPU_BMIPS ++config CPU_BMIPS3300 + bool +- select CPU_MIPS32 +- select CPU_SUPPORTS_32BIT_KERNEL +- select DMA_NONCOHERENT +- select IRQ_CPU +- select SWAP_IO_SPACE +- select WEAK_ORDERING ++ ++config CPU_BMIPS4350 ++ bool ++ select SYS_SUPPORTS_SMP ++ select SYS_SUPPORTS_HOTPLUG_CPU ++ ++config CPU_BMIPS4380 ++ bool ++ select SYS_SUPPORTS_SMP ++ select SYS_SUPPORTS_HOTPLUG_CPU ++ ++config CPU_BMIPS5000 ++ bool ++ select CPU_SUPPORTS_HIGHMEM ++ select MIPS_CPU_SCACHE ++ select SYS_SUPPORTS_SMP ++ select SYS_SUPPORTS_HOTPLUG_CPU + + config SYS_HAS_CPU_LOONGSON2E + bool +@@ -1650,6 +1642,9 @@ config SYS_HAS_CPU_SB1 + config SYS_HAS_CPU_CAVIUM_OCTEON + bool + ++config SYS_HAS_CPU_BMIPS ++ bool ++ + config SYS_HAS_CPU_BMIPS3300 + bool + diff --git a/target/linux/brcm63xx/patches-3.9/105-MIPS-BCM63XX-let-the-individual-SoCs-select-the-appr.patch b/target/linux/brcm63xx/patches-3.9/105-MIPS-BCM63XX-let-the-individual-SoCs-select-the-appr.patch new file mode 100644 index 0000000000..cb09abcc2d --- /dev/null +++ b/target/linux/brcm63xx/patches-3.9/105-MIPS-BCM63XX-let-the-individual-SoCs-select-the-appr.patch @@ -0,0 +1,72 @@ +From 9d1e9d7abd2f2d067169fb0c62e34cf080bbd7a1 Mon Sep 17 00:00:00 2001 +From: Jonas Gorski <jogo@openwrt.org> +Date: Sun, 23 Jun 2013 12:25:49 +0200 +Subject: [PATCH 06/10] MIPS: BCM63XX: let the individual SoCs select the + appropriate CPUs + +Let each supported chip select the appropirate SYS_HAS_CPU_BMIPS* +option for its embedded processor, so support will be conditionally +included. + +Signed-off-by: Jonas Gorski <jogo@openwrt.org> + +fix bmips selection +--- + arch/mips/Kconfig | 1 - + arch/mips/bcm63xx/Kconfig | 8 ++++++++ + 2 files changed, 8 insertions(+), 1 deletion(-) + +--- a/arch/mips/Kconfig ++++ b/arch/mips/Kconfig +@@ -131,7 +131,6 @@ config BCM63XX + select IRQ_CPU + select SYS_HAS_CPU_MIPS32_R1 + select SYS_HAS_CPU_BMIPS +- select SYS_HAS_CPU_BMIPS4350 if !BCM63XX_CPU_6338 && !BCM63XX_CPU_6345 && !BCM63XX_CPU_6348 + select NR_CPUS_DEFAULT_2 + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_BIG_ENDIAN +--- a/arch/mips/bcm63xx/Kconfig ++++ b/arch/mips/bcm63xx/Kconfig +@@ -3,33 +3,41 @@ menu "CPU support" + + config BCM63XX_CPU_3368 + bool "support 3368 CPU" ++ select SYS_HAS_CPU_BMIPS4350 + select HW_HAS_PCI + + config BCM63XX_CPU_6328 + bool "support 6328 CPU" ++ select SYS_HAS_CPU_BMIPS4350 + select HW_HAS_PCI + + config BCM63XX_CPU_6338 + bool "support 6338 CPU" ++ select SYS_HAS_CPU_BMIPS3300 + select HW_HAS_PCI + + config BCM63XX_CPU_6345 + bool "support 6345 CPU" ++ select SYS_HAS_CPU_BMIPS3300 + + config BCM63XX_CPU_6348 + bool "support 6348 CPU" ++ select SYS_HAS_CPU_BMIPS3300 + select HW_HAS_PCI + + config BCM63XX_CPU_6358 + bool "support 6358 CPU" ++ select SYS_HAS_CPU_BMIPS4350 + select HW_HAS_PCI + + config BCM63XX_CPU_6362 + bool "support 6362 CPU" ++ select SYS_HAS_CPU_BMIPS4350 + select HW_HAS_PCI + + config BCM63XX_CPU_6368 + bool "support 6368 CPU" ++ select SYS_HAS_CPU_BMIPS4350 + select HW_HAS_PCI + endmenu + diff --git a/target/linux/brcm63xx/patches-3.9/106-MIPS-bmips-add-a-helper-function-for-registering-smp.patch b/target/linux/brcm63xx/patches-3.9/106-MIPS-bmips-add-a-helper-function-for-registering-smp.patch new file mode 100644 index 0000000000..ad357b6ab2 --- /dev/null +++ b/target/linux/brcm63xx/patches-3.9/106-MIPS-bmips-add-a-helper-function-for-registering-smp.patch @@ -0,0 +1,42 @@ +From aa15ac91faccc3bf01a29670b1f9ae1945cea056 Mon Sep 17 00:00:00 2001 +From: Jonas Gorski <jogo@openwrt.org> +Date: Sun, 23 Jun 2013 14:04:51 +0200 +Subject: [PATCH 07/10] MIPS: bmips: add a helper function for registering smp + ops + +Add a helper similar to the generic register_XXX_smp_ops() for bmips. + +Signed-off-by: Jonas Gorski <jogo@openwrt.org> +--- + arch/mips/include/asm/bmips.h | 13 +++++++++++++ + 1 file changed, 13 insertions(+) + +--- a/arch/mips/include/asm/bmips.h ++++ b/arch/mips/include/asm/bmips.h +@@ -47,6 +47,7 @@ + #include <linux/cpumask.h> + #include <asm/cpu-features.h> + #include <asm/r4kcache.h> ++#include <asm/smp-ops.h> + + #define cpu_is_bmips32() (current_cpu_type() == CPU_BMIPS32) + #define cpu_is_bmips3300() (IS_ENABLED(CONFIG_CPU_BMIPS3300) && \ +@@ -59,6 +60,18 @@ + current_cpu_type() == CPU_BMIPS5000) + + extern struct plat_smp_ops bmips_smp_ops; ++ ++static inline int register_bmips_smp_ops(void) ++{ ++#ifdef CONFIG_CPU_BMIPS ++ register_smp_ops(&bmips_smp_ops); ++ ++ return 0; ++#else ++ return -ENODEV; ++#endif ++} ++ + extern char bmips_reset_nmi_vec; + extern char bmips_reset_nmi_vec_end; + extern char bmips_smp_movevec; diff --git a/target/linux/brcm63xx/patches-3.9/107-MIPS-BCM63XX-always-register-bmips-smp-ops.patch b/target/linux/brcm63xx/patches-3.9/107-MIPS-BCM63XX-always-register-bmips-smp-ops.patch new file mode 100644 index 0000000000..1ea52c478c --- /dev/null +++ b/target/linux/brcm63xx/patches-3.9/107-MIPS-BCM63XX-always-register-bmips-smp-ops.patch @@ -0,0 +1,26 @@ +From c489eace9492d1b8bedb314bdef169e719161bff Mon Sep 17 00:00:00 2001 +From: Jonas Gorski <jogo@openwrt.org> +Date: Fri, 28 Jun 2013 00:08:16 +0200 +Subject: [PATCH 08/10] MIPS: BCM63XX: always register bmips smp ops + +Signed-off-by: Jonas Gorski <jogo@openwrt.org> +--- + arch/mips/bcm63xx/prom.c | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +--- a/arch/mips/bcm63xx/prom.c ++++ b/arch/mips/bcm63xx/prom.c +@@ -59,10 +59,10 @@ void __init prom_init(void) + /* do low level board init */ + board_prom_init(); + +- if (IS_ENABLED(CONFIG_CPU_BMIPS4350) && IS_ENABLED(CONFIG_SMP)) { +- /* set up SMP */ +- register_smp_ops(&bmips_smp_ops); ++ /* set up SMP */ ++ register_bmips_smp_ops(); + ++ if (IS_ENABLED(CONFIG_CPU_BMIPS4350) && IS_ENABLED(CONFIG_SMP)) { + /* + * BCM6328 might not have its second CPU enabled, while BCM6358 + * needs special handling for its shared TLB, so disable SMP diff --git a/target/linux/brcm63xx/patches-3.9/108-MIPS-BCM63XX-change-the-guard-to-a-BMIPS4350-check.patch b/target/linux/brcm63xx/patches-3.9/108-MIPS-BCM63XX-change-the-guard-to-a-BMIPS4350-check.patch new file mode 100644 index 0000000000..75729858eb --- /dev/null +++ b/target/linux/brcm63xx/patches-3.9/108-MIPS-BCM63XX-change-the-guard-to-a-BMIPS4350-check.patch @@ -0,0 +1,21 @@ +From 3a862fd3cc4f477ad2232370abfceca1ec2145ae Mon Sep 17 00:00:00 2001 +From: Jonas Gorski <jogo@openwrt.org> +Date: Fri, 28 Jun 2013 00:10:07 +0200 +Subject: [PATCH 09/10] MIPS: BCM63XX: change the guard to a BMIPS4350 check + +Signed-off-by: Jonas Gorski <jogo@openwrt.org> +--- + arch/mips/bcm63xx/prom.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/arch/mips/bcm63xx/prom.c ++++ b/arch/mips/bcm63xx/prom.c +@@ -62,7 +62,7 @@ void __init prom_init(void) + /* set up SMP */ + register_bmips_smp_ops(); + +- if (IS_ENABLED(CONFIG_CPU_BMIPS4350) && IS_ENABLED(CONFIG_SMP)) { ++ if (cpu_is_bmips4350()) { + /* + * BCM6328 might not have its second CPU enabled, while BCM6358 + * needs special handling for its shared TLB, so disable SMP diff --git a/target/linux/brcm63xx/patches-3.9/109-MIPS-BCM63XX-disable-SMP-also-on-BCM3368.patch b/target/linux/brcm63xx/patches-3.9/109-MIPS-BCM63XX-disable-SMP-also-on-BCM3368.patch new file mode 100644 index 0000000000..dbb2ae4e34 --- /dev/null +++ b/target/linux/brcm63xx/patches-3.9/109-MIPS-BCM63XX-disable-SMP-also-on-BCM3368.patch @@ -0,0 +1,36 @@ +From 32d4b03c0aedb96022e86a67a560f6eaf488200a Mon Sep 17 00:00:00 2001 +From: Jonas Gorski <jogo@openwrt.org> +Date: Fri, 28 Jun 2013 00:25:13 +0200 +Subject: [PATCH 10/10] MIPS: BCM63XX: disable SMP also on BCM3368 + +BCM3368 has the same shared TLB as BCM6358. + +Signed-off-by: Jonas Gorski <jogo@openwrt.org> +--- + arch/mips/bcm63xx/prom.c | 8 ++++---- + 1 file changed, 4 insertions(+), 4 deletions(-) + +--- a/arch/mips/bcm63xx/prom.c ++++ b/arch/mips/bcm63xx/prom.c +@@ -64,9 +64,9 @@ void __init prom_init(void) + + if (cpu_is_bmips4350()) { + /* +- * BCM6328 might not have its second CPU enabled, while BCM6358 +- * needs special handling for its shared TLB, so disable SMP +- * for now. ++ * BCM6328 might not have its second CPU enabled, while BCM3368 ++ * and BCM6358 need special handling for their shared TLB, so ++ * disable SMP for now. + */ + if (BCMCPU_IS_6328()) { + reg = bcm_readl(BCM_6328_OTP_BASE + +@@ -74,7 +74,7 @@ void __init prom_init(void) + + if (reg & OTP_6328_REG3_TP1_DISABLED) + bmips_smp_enabled = 0; +- } else if (BCMCPU_IS_6358()) { ++ } else if (BCMCPU_IS_3368() || BCMCPU_IS_6358()) { + bmips_smp_enabled = 0; + } + diff --git a/target/linux/brcm63xx/patches-3.9/100-MIPS-BCM63XX-add-USB-host-clock-enable-delay.patch b/target/linux/brcm63xx/patches-3.9/110-MIPS-BCM63XX-add-USB-host-clock-enable-delay.patch index 63d385be4e..63d385be4e 100644 --- a/target/linux/brcm63xx/patches-3.9/100-MIPS-BCM63XX-add-USB-host-clock-enable-delay.patch +++ b/target/linux/brcm63xx/patches-3.9/110-MIPS-BCM63XX-add-USB-host-clock-enable-delay.patch diff --git a/target/linux/brcm63xx/patches-3.9/101-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch b/target/linux/brcm63xx/patches-3.9/111-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch index eaf75030f0..eaf75030f0 100644 --- a/target/linux/brcm63xx/patches-3.9/101-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch +++ b/target/linux/brcm63xx/patches-3.9/111-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch diff --git a/target/linux/brcm63xx/patches-3.9/102-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch b/target/linux/brcm63xx/patches-3.9/112-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch index 4d00f0e763..4d00f0e763 100644 --- a/target/linux/brcm63xx/patches-3.9/102-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch +++ b/target/linux/brcm63xx/patches-3.9/112-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch diff --git a/target/linux/brcm63xx/patches-3.9/103-MIPS-BCM63XX-add-OHCI-EHCI-configuration-bits-to-com.patch b/target/linux/brcm63xx/patches-3.9/113-MIPS-BCM63XX-add-OHCI-EHCI-configuration-bits-to-com.patch index 40bbe083a7..40bbe083a7 100644 --- a/target/linux/brcm63xx/patches-3.9/103-MIPS-BCM63XX-add-OHCI-EHCI-configuration-bits-to-com.patch +++ b/target/linux/brcm63xx/patches-3.9/113-MIPS-BCM63XX-add-OHCI-EHCI-configuration-bits-to-com.patch diff --git a/target/linux/brcm63xx/patches-3.9/104-MIPS-BCM63XX-introduce-BCM63XX_OHCI-configuration-sy.patch b/target/linux/brcm63xx/patches-3.9/114-MIPS-BCM63XX-introduce-BCM63XX_OHCI-configuration-sy.patch index 81810c073a..03fa41c410 100644 --- a/target/linux/brcm63xx/patches-3.9/104-MIPS-BCM63XX-introduce-BCM63XX_OHCI-configuration-sy.patch +++ b/target/linux/brcm63xx/patches-3.9/114-MIPS-BCM63XX-introduce-BCM63XX_OHCI-configuration-sy.patch @@ -16,8 +16,8 @@ Signed-off-by: Florian Fainelli <florian@openwrt.org> --- a/arch/mips/bcm63xx/Kconfig +++ b/arch/mips/bcm63xx/Kconfig -@@ -5,9 +5,16 @@ config BCM63XX_CPU_3368 - bool "support 3368 CPU" +@@ -6,10 +6,17 @@ config BCM63XX_CPU_3368 + select SYS_HAS_CPU_BMIPS4350 select HW_HAS_PCI +config BCM63XX_OHCI @@ -28,29 +28,33 @@ Signed-off-by: Florian Fainelli <florian@openwrt.org> + config BCM63XX_CPU_6328 bool "support 6328 CPU" + select SYS_HAS_CPU_BMIPS4350 select HW_HAS_PCI + select BCM63XX_OHCI config BCM63XX_CPU_6338 bool "support 6338 CPU" -@@ -19,18 +26,22 @@ config BCM63XX_CPU_6345 - config BCM63XX_CPU_6348 +@@ -24,21 +31,25 @@ config BCM63XX_CPU_6348 bool "support 6348 CPU" + select SYS_HAS_CPU_BMIPS3300 select HW_HAS_PCI + select BCM63XX_OHCI config BCM63XX_CPU_6358 bool "support 6358 CPU" + select SYS_HAS_CPU_BMIPS4350 select HW_HAS_PCI + select BCM63XX_OHCI config BCM63XX_CPU_6362 bool "support 6362 CPU" + select SYS_HAS_CPU_BMIPS4350 select HW_HAS_PCI + select BCM63XX_OHCI config BCM63XX_CPU_6368 bool "support 6368 CPU" + select SYS_HAS_CPU_BMIPS4350 select HW_HAS_PCI + select BCM63XX_OHCI endmenu diff --git a/target/linux/brcm63xx/patches-3.9/105-MIPS-BCM63XX-add-support-for-the-on-chip-OHCI-contro.patch b/target/linux/brcm63xx/patches-3.9/115-MIPS-BCM63XX-add-support-for-the-on-chip-OHCI-contro.patch index 732fe94cfd..732fe94cfd 100644 --- a/target/linux/brcm63xx/patches-3.9/105-MIPS-BCM63XX-add-support-for-the-on-chip-OHCI-contro.patch +++ b/target/linux/brcm63xx/patches-3.9/115-MIPS-BCM63XX-add-support-for-the-on-chip-OHCI-contro.patch diff --git a/target/linux/brcm63xx/patches-3.9/106-MIPS-BCM63XX-register-OHCI-controller-if-board-enabl.patch b/target/linux/brcm63xx/patches-3.9/116-MIPS-BCM63XX-register-OHCI-controller-if-board-enabl.patch index 621e1f909d..621e1f909d 100644 --- a/target/linux/brcm63xx/patches-3.9/106-MIPS-BCM63XX-register-OHCI-controller-if-board-enabl.patch +++ b/target/linux/brcm63xx/patches-3.9/116-MIPS-BCM63XX-register-OHCI-controller-if-board-enabl.patch diff --git a/target/linux/brcm63xx/patches-3.9/107-MIPS-BCM63XX-introduce-BCM63XX_EHCI-configuration-sy.patch b/target/linux/brcm63xx/patches-3.9/117-MIPS-BCM63XX-introduce-BCM63XX_EHCI-configuration-sy.patch index a76252ed5c..97b8d6518a 100644 --- a/target/linux/brcm63xx/patches-3.9/107-MIPS-BCM63XX-introduce-BCM63XX_EHCI-configuration-sy.patch +++ b/target/linux/brcm63xx/patches-3.9/117-MIPS-BCM63XX-introduce-BCM63XX_EHCI-configuration-sy.patch @@ -19,7 +19,7 @@ Signed-off-by: Florian Fainelli <florian@openwrt.org> --- a/arch/mips/bcm63xx/Kconfig +++ b/arch/mips/bcm63xx/Kconfig -@@ -11,10 +11,17 @@ config BCM63XX_OHCI +@@ -12,11 +12,18 @@ config BCM63XX_OHCI select USB_OHCI_BIG_ENDIAN_DESC if USB_OHCI_HCD select USB_OHCI_BIG_ENDIAN_MMIO if USB_OHCI_HCD @@ -31,26 +31,29 @@ Signed-off-by: Florian Fainelli <florian@openwrt.org> + config BCM63XX_CPU_6328 bool "support 6328 CPU" + select SYS_HAS_CPU_BMIPS4350 select HW_HAS_PCI select BCM63XX_OHCI + select BCM63XX_EHCI config BCM63XX_CPU_6338 bool "support 6338 CPU" -@@ -32,16 +39,19 @@ config BCM63XX_CPU_6358 - bool "support 6358 CPU" +@@ -38,18 +45,21 @@ config BCM63XX_CPU_6358 + select SYS_HAS_CPU_BMIPS4350 select HW_HAS_PCI select BCM63XX_OHCI + select BCM63XX_EHCI config BCM63XX_CPU_6362 bool "support 6362 CPU" + select SYS_HAS_CPU_BMIPS4350 select HW_HAS_PCI select BCM63XX_OHCI + select BCM63XX_EHCI config BCM63XX_CPU_6368 bool "support 6368 CPU" + select SYS_HAS_CPU_BMIPS4350 select HW_HAS_PCI select BCM63XX_OHCI + select BCM63XX_EHCI diff --git a/target/linux/brcm63xx/patches-3.9/108-MIPS-BCM63XX-add-support-for-the-on-chip-EHCI-contro.patch b/target/linux/brcm63xx/patches-3.9/118-MIPS-BCM63XX-add-support-for-the-on-chip-EHCI-contro.patch index ef4ba17a4d..ef4ba17a4d 100644 --- a/target/linux/brcm63xx/patches-3.9/108-MIPS-BCM63XX-add-support-for-the-on-chip-EHCI-contro.patch +++ b/target/linux/brcm63xx/patches-3.9/118-MIPS-BCM63XX-add-support-for-the-on-chip-EHCI-contro.patch diff --git a/target/linux/brcm63xx/patches-3.9/109-MIPS-BCM63XX-register-EHCI-controller-if-board-enabl.patch b/target/linux/brcm63xx/patches-3.9/119-MIPS-BCM63XX-register-EHCI-controller-if-board-enabl.patch index 3d1e7f58cc..3d1e7f58cc 100644 --- a/target/linux/brcm63xx/patches-3.9/109-MIPS-BCM63XX-register-EHCI-controller-if-board-enabl.patch +++ b/target/linux/brcm63xx/patches-3.9/119-MIPS-BCM63XX-register-EHCI-controller-if-board-enabl.patch diff --git a/target/linux/brcm63xx/patches-3.9/110-MIPS-BCM63XX-EHCI-controller-does-not-support-overcu.patch b/target/linux/brcm63xx/patches-3.9/120-MIPS-BCM63XX-EHCI-controller-does-not-support-overcu.patch index 6d91129932..6d91129932 100644 --- a/target/linux/brcm63xx/patches-3.9/110-MIPS-BCM63XX-EHCI-controller-does-not-support-overcu.patch +++ b/target/linux/brcm63xx/patches-3.9/120-MIPS-BCM63XX-EHCI-controller-does-not-support-overcu.patch |