1 files changed, 0 insertions, 88 deletions
diff --git a/target/linux/ixp4xx/patches-2.6.23/031-ixp4xx-net-drivers-nslu2.patch b/target/linux/ixp4xx/patches-2.6.23/031-ixp4xx-net-drivers-nslu2.patch
deleted file mode 100644
index cd500a5cb2..0000000000
--- a/target/linux/ixp4xx/patches-2.6.23/031-ixp4xx-net-drivers-nslu2.patch
+++ /dev/null
@@ -1,88 +0,0 @@
-Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/nslu2-setup.c
-===================================================================
---- linux-2.6.23.17.orig/arch/arm/mach-ixp4xx/nslu2-setup.c
-+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/nslu2-setup.c
-@@ -24,6 +24,7 @@
- #include <asm/mach/arch.h>
- #include <asm/mach/flash.h>
- #include <asm/mach/time.h>
-+#include <asm/io.h>
- 
- static struct flash_platform_data nslu2_flash_data = {
- 	.map_name		= "cfi_probe",
-@@ -140,6 +141,23 @@ static struct platform_device nslu2_uart
- 	.resource		= nslu2_uart_resources,
- };
- 
-+/* Built-in 10/100 Ethernet MAC interfaces */
-+static struct eth_plat_info nslu2_plat_eth[] = {
-+	{
-+		.phy		= 1,
-+		.rxq		= 3,
-+		.txreadyq	= 20,
-+	}
-+};
-+
-+static struct platform_device nslu2_eth[] = {
-+	{
-+		.name			= "ixp4xx_eth",
-+		.id			= IXP4XX_ETH_NPEB,
-+		.dev.platform_data	= nslu2_plat_eth,
-+	}
-+};
-+
- static struct platform_device *nslu2_devices[] __initdata = {
- 	&nslu2_i2c_gpio,
- 	&nslu2_flash,
-@@ -147,6 +165,7 @@ static struct platform_device *nslu2_dev
- #ifdef CONFIG_LEDS_IXP4XX
- 	&nslu2_leds,
- #endif
-+	&nslu2_eth[0],
- };
- 
- static void nslu2_power_off(void)
-@@ -175,6 +194,9 @@ static struct sys_timer nslu2_timer = {
- 
- static void __init nslu2_init(void)
- {
-+	uint8_t __iomem *f;
-+	int i;
-+
- 	ixp4xx_sys_init();
- 
- 	nslu2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-@@ -191,6 +213,33 @@ static void __init nslu2_init(void)
- 	(void)platform_device_register(&nslu2_uart);
- 
- 	platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices));
-+
-+
-+	/*
-+	 * Map in a portion of the flash and read the MAC address.
-+	 * Since it is stored in BE in the flash itself, we need to
-+	 * byteswap it if we're in LE mode.
-+	 */
-+	if ((f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x40000))) {
-+#ifdef __ARMEB__
-+		for (i = 0; i < 6; i++) {
-+			nslu2_plat_eth[0].hwaddr[i] = readb(f + 0x3FFB0 + i);
-+		}
-+#else
-+		nslu2_plat_eth[0].hwaddr[0] = readb(f + 0x3FFB0 + 3);
-+		nslu2_plat_eth[0].hwaddr[1] = readb(f + 0x3FFB0 + 2);
-+		nslu2_plat_eth[0].hwaddr[2] = readb(f + 0x3FFB0 + 1);
-+		nslu2_plat_eth[0].hwaddr[3] = readb(f + 0x3FFB0 + 0);
-+		nslu2_plat_eth[0].hwaddr[4] = readb(f + 0x3FFB0 + 7);
-+		nslu2_plat_eth[0].hwaddr[5] = readb(f + 0x3FFB0 + 6);
-+#endif
-+		iounmap(f);
-+	}
-+	printk(KERN_INFO "NSLU2: Using MAC address %.2x:%.2x:%.2x:%.2x:%.2x:%.2x for port 0\n",
-+	       nslu2_plat_eth[0].hwaddr[0], nslu2_plat_eth[0].hwaddr[1],
-+	       nslu2_plat_eth[0].hwaddr[2], nslu2_plat_eth[0].hwaddr[3],
-+	       nslu2_plat_eth[0].hwaddr[4], nslu2_plat_eth[0].hwaddr[5]);
-+
- }
- 
- MACHINE_START(NSLU2, "Linksys NSLU2")