diff options
Diffstat (limited to 'target/linux/s3c24xx/patches-2.6.30/100-udc-poll-vbus.patch')
| -rw-r--r-- | target/linux/s3c24xx/patches-2.6.30/100-udc-poll-vbus.patch | 230 |
1 files changed, 230 insertions, 0 deletions
diff --git a/target/linux/s3c24xx/patches-2.6.30/100-udc-poll-vbus.patch b/target/linux/s3c24xx/patches-2.6.30/100-udc-poll-vbus.patch new file mode 100644 index 0000000000..5fe1c2ec8c --- /dev/null +++ b/target/linux/s3c24xx/patches-2.6.30/100-udc-poll-vbus.patch @@ -0,0 +1,230 @@ +Index: linux-2.6.30-rc6/drivers/usb/gadget/s3c2410_udc.c +=================================================================== +--- linux-2.6.30-rc6.orig/drivers/usb/gadget/s3c2410_udc.c 2009-05-16 06:12:57.000000000 +0200 ++++ linux-2.6.30-rc6/drivers/usb/gadget/s3c2410_udc.c 2009-05-18 19:08:35.000000000 +0200 +@@ -74,6 +74,7 @@ + static u64 rsrc_start; + static u64 rsrc_len; + static struct dentry *s3c2410_udc_debugfs_root; ++static struct timer_list vbus_poll_timer; + + static inline u32 udc_read(u32 reg) + { +@@ -134,6 +135,8 @@ + return 0; + } + #endif ++ ++#ifdef CONFIG_USB_GADGET_DEBUG_FS + static int s3c2410_udc_debugfs_seq_show(struct seq_file *m, void *p) + { + u32 addr_reg,pwr_reg,ep_int_reg,usb_int_reg; +@@ -197,6 +200,7 @@ + .release = single_release, + .owner = THIS_MODULE, + }; ++#endif + + /* io macros */ + +@@ -843,6 +847,7 @@ + u32 ep_csr1; + u32 idx; + ++handle_ep_again: + if (likely (!list_empty(&ep->queue))) + req = list_entry(ep->queue.next, + struct s3c2410_request, queue); +@@ -882,6 +887,8 @@ + + if ((ep_csr1 & S3C2410_UDC_OCSR1_PKTRDY) && req) { + s3c2410_udc_read_fifo(ep,req); ++ if (s3c2410_udc_fifo_count_out()) ++ goto handle_ep_again; + } + } + } +@@ -1520,6 +1527,20 @@ + return IRQ_HANDLED; + } + ++static void s3c2410_udc_vbus_poll(unsigned long _data) ++{ ++ struct s3c2410_udc *data = (struct s3c2410_udc *)_data; ++ int v; ++ ++ dprintk(DEBUG_NORMAL, "%s()\n", __func__); ++ if (udc_info && udc_info->get_vbus_status) { ++ v = udc_info->get_vbus_status(); ++ if ((v > -1) && (v != data->vbus)) ++ s3c2410_udc_vbus_session(&data->gadget, v); ++ mod_timer(&vbus_poll_timer, jiffies + msecs_to_jiffies(900)); ++ } ++} ++ + static int s3c2410_vbus_draw(struct usb_gadget *_gadget, unsigned ma) + { + dprintk(DEBUG_NORMAL, "%s()\n", __func__); +@@ -1677,6 +1698,11 @@ + goto register_error; + } + ++ if (udc_info && udc_info->get_vbus_status && !udc_info->vbus_pin) { ++ mod_timer(&vbus_poll_timer, jiffies + msecs_to_jiffies(50)); ++ return 0; /* just return, vbus change will enable udc */ ++ } ++ + /* Enable udc */ + s3c2410_udc_enable(udc); + +@@ -1707,6 +1733,7 @@ + if (driver->disconnect) + driver->disconnect(&udc->gadget); + ++ driver->unbind(&udc->gadget); + device_del(&udc->gadget.dev); + udc->driver = NULL; + +@@ -1893,10 +1920,16 @@ + } + + dev_dbg(dev, "got irq %i\n", irq); ++ } else if (udc_info && udc_info->get_vbus_status) { ++ udc->vbus = 0; ++ init_timer(&vbus_poll_timer); ++ vbus_poll_timer.function = s3c2410_udc_vbus_poll; ++ vbus_poll_timer.data = (unsigned long) udc; + } else { + udc->vbus = 1; + } + ++#ifdef CONFIG_USB_GADGET_DEBUG_FS + if (s3c2410_udc_debugfs_root) { + udc->regs_info = debugfs_create_file("registers", S_IRUGO, + s3c2410_udc_debugfs_root, +@@ -1904,6 +1937,7 @@ + if (!udc->regs_info) + dev_warn(dev, "debugfs file creation failed\n"); + } ++#endif + + dev_dbg(dev, "probe ok\n"); + +@@ -1939,6 +1973,8 @@ + if (udc_info && udc_info->vbus_pin > 0) { + irq = gpio_to_irq(udc_info->vbus_pin); + free_irq(irq, udc); ++ } else if (udc_info && udc_info->get_vbus_status) { ++ del_timer_sync(&vbus_poll_timer); + } + + free_irq(IRQ_USBD, udc); +@@ -2013,12 +2049,14 @@ + + dprintk(DEBUG_NORMAL, "%s: version %s\n", gadget_name, DRIVER_VERSION); + ++#ifdef CONFIG_USB_GADGET_DEBUG_FS + s3c2410_udc_debugfs_root = debugfs_create_dir(gadget_name, NULL); + if (IS_ERR(s3c2410_udc_debugfs_root)) { + printk(KERN_ERR "%s: debugfs dir creation failed %ld\n", + gadget_name, PTR_ERR(s3c2410_udc_debugfs_root)); + s3c2410_udc_debugfs_root = NULL; + } ++#endif + + retval = platform_driver_register(&udc_driver_2410); + if (retval) +Index: linux-2.6.30-rc6/drivers/usb/host/ohci-s3c2410.c +=================================================================== +--- linux-2.6.30-rc6.orig/drivers/usb/host/ohci-s3c2410.c 2009-05-16 06:12:57.000000000 +0200 ++++ linux-2.6.30-rc6/drivers/usb/host/ohci-s3c2410.c 2009-05-18 19:08:35.000000000 +0200 +@@ -21,6 +21,8 @@ + + #include <linux/platform_device.h> + #include <linux/clk.h> ++#include <mach/hardware.h> ++#include <mach/regs-gpio.h> + #include <plat/usb-control.h> + + #define valid_port(idx) ((idx) == 1 || (idx) == 2) +@@ -306,6 +308,42 @@ + local_irq_restore(flags); + } + ++/* switching of USB pads */ ++static ssize_t show_usb_mode(struct device *dev, struct device_attribute *attr, ++ char *buf) ++{ ++ if (__raw_readl(S3C24XX_MISCCR) & S3C2410_MISCCR_USBHOST) ++ return sprintf(buf, "host\n"); ++ ++ return sprintf(buf, "device\n"); ++} ++ ++static ssize_t set_usb_mode(struct device *dev, struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ if (!strncmp(buf, "host", 4)) { ++ printk(KERN_WARNING "s3c2410: changing usb to host\n"); ++ s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST, ++ S3C2410_MISCCR_USBHOST); ++ /* FIXME: ++ * - call machine-specific disable-pullup function i ++ * - enable +Vbus (if hardware supports it) ++ */ ++ s3c2410_gpio_setpin(S3C2410_GPB9, 0); ++ } else if (!strncmp(buf, "device", 6)) { ++ printk(KERN_WARNING "s3c2410: changing usb to device\n"); ++ s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST, 0); ++ s3c2410_gpio_setpin(S3C2410_GPB9, 1); ++ } else { ++ printk(KERN_WARNING "s3c2410: unknown mode\n"); ++ return -EINVAL; ++ } ++ ++ return count; ++} ++ ++static DEVICE_ATTR(usb_mode, S_IRUGO | S_IWUSR, show_usb_mode, set_usb_mode); ++ + /* may be called without controller electrically present */ + /* may be called with controller, bus, and devices active */ + +@@ -486,15 +524,23 @@ + return 0; + } + ++static int ohci_hcd_s3c2410_drv_resume(struct platform_device *pdev) ++{ ++ struct usb_hcd *hcd = platform_get_drvdata(pdev); ++ ++ ohci_finish_controller_resume(hcd); ++ return 0; ++} ++ + static struct platform_driver ohci_hcd_s3c2410_driver = { + .probe = ohci_hcd_s3c2410_drv_probe, + .remove = ohci_hcd_s3c2410_drv_remove, + .shutdown = usb_hcd_platform_shutdown, + /*.suspend = ohci_hcd_s3c2410_drv_suspend, */ +- /*.resume = ohci_hcd_s3c2410_drv_resume, */ ++ .resume = ohci_hcd_s3c2410_drv_resume, + .driver = { + .owner = THIS_MODULE, +- .name = "s3c2410-ohci", ++ .name = "s3c-ohci", + }, + }; + +Index: linux-2.6.30-rc6/arch/arm/plat-s3c24xx/include/plat/udc.h +=================================================================== +--- linux-2.6.30-rc6.orig/arch/arm/plat-s3c24xx/include/plat/udc.h 2009-05-16 06:12:57.000000000 +0200 ++++ linux-2.6.30-rc6/arch/arm/plat-s3c24xx/include/plat/udc.h 2009-05-18 19:08:35.000000000 +0200 +@@ -27,6 +27,7 @@ + struct s3c2410_udc_mach_info { + void (*udc_command)(enum s3c2410_udc_cmd_e); + void (*vbus_draw)(unsigned int ma); ++ int (*get_vbus_status)(void); + unsigned int vbus_pin; + unsigned char vbus_pin_inverted; + }; |