diff options
Diffstat (limited to 'target/linux/ubicom32/files/arch')
249 files changed, 40660 insertions, 0 deletions
diff --git a/target/linux/ubicom32/files/arch/ubicom32/Kconfig b/target/linux/ubicom32/files/arch/ubicom32/Kconfig new file mode 100644 index 0000000000..acc6116301 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/Kconfig @@ -0,0 +1,403 @@ +# +# For a description of the syntax of this configuration file, +# see Documentation/kbuild/kconfig-language.txt. +# + +mainmenu "uClinux/ubicom32 (w/o MMU) Kernel Configuration" + +config UBICOM32 + bool + select HAVE_OPROFILE + default y + +config RAMKERNEL + bool + default y + +config CPU_BIG_ENDIAN + bool + default y + +config FORCE_MAX_ZONEORDER + int + default "14" + +config HAVE_CLK + bool + default y + +config MMU + bool + default n + +config FPU + bool + default n + +config ZONE_DMA + bool + default y + +config RWSEM_GENERIC_SPINLOCK + bool + default y + +config RWSEM_XCHGADD_ALGORITHM + bool + default n + +config ARCH_HAS_ILOG2_U32 + bool + default n + +config ARCH_HAS_ILOG2_U64 + bool + default n + +config GENERIC_FIND_NEXT_BIT + bool + default y + +config GENERIC_GPIO + bool + default y + +config GPIOLIB + bool + default y + +config GENERIC_HWEIGHT + bool + default y + +config GENERIC_HARDIRQS + bool + default y + +config STACKTRACE_SUPPORT + bool + default y + +config LOCKDEP_SUPPORT + bool + default y + +config GENERIC_CALIBRATE_DELAY + bool + default y + +config GENERIC_TIME + bool + default y + +config TIME_LOW_RES + bool + default y + +config GENERIC_CLOCKEVENTS + bool + default y + +config GENERIC_CLOCKEVENTS_BROADCAST + bool + depends on GENERIC_CLOCKEVENTS + default y if SMP && !LOCAL_TIMERS + +config NO_IOPORT + def_bool y + +config ARCH_SUPPORTS_AOUT + def_bool y + +config IRQ_PER_CPU + bool + default y + +config SCHED_NO_NO_OMIT_FRAME_POINTER + bool + default y + +config UBICOM32_PLIO + bool + default n + +menu "Processor type and features" + +comment "Processor type will be selected by Board" + +config UBICOM32_V3 + bool + help + Ubicom IP5xxx series processor support. + +config UBICOM32_V4 + bool + help + Ubicom IP7xxx series processor support. + +comment "Board" +choice + prompt "Board type" + help + Select your board. + +config NOBOARD + bool "No board selected" + help + Default. Don't select any board specific config. Will not build unless you change! + +# Add your boards here +source "arch/ubicom32/mach-ip5k/Kconfig" +source "arch/ubicom32/mach-ip7k/Kconfig" + +endchoice + +comment "Kernel Options" +config SMP + bool "Symmetric multi-processing support" + select USE_GENERIC_SMP_HELPERS + default n + help + Enables multithreading support. Enabling SMP support increases + the size of system data structures. SMP support can have either + positive or negative impact on performance depending on workloads. + + If you do not know what to do here, say N. +config OLD_40400010_SYSTEM_CALL + bool "Provide old system call interface at 0x40400010" + default y + help + Provides the old system call interface, does not affect the + new system_call interface. + +config NR_CPUS + int "Number of configured CPUs" + range 2 32 + default 2 + depends on SMP + help + Upper bound on the number of CPUs. Space is reserved + at compile time for this many CPUs. + +config LOCAL_TIMERS + bool "Use local timer interrupts" + depends on SMP + default y + help + Enable support for local timers on SMP platforms, rather then the + legacy IPI broadcast method. Local timers allows the system + accounting to be spread across the timer interval, preventing a + "thundering herd" at every timer tick. A physical timer is allocated + per cpu. + +config TIMER_EXTRA_ALLOC + int "Number of additional physical timer events to create" + depends on GENERIC_CLOCKEVENTS + default 0 + help + The Ubicom32 processor has a number of event timers that can be wrapped + in Linux clock event structures (assuming that the timers are not being + used for another purpose). Based on the value of LOCAL_TIMERS, either + 2 timers will be used or a timer will be used for every CPU. This value + allows the programmer to select additional timers over that amount. + +config IRQSTACKS + bool "Create separate stacks for interrupt handling" + default n + help + Selecting this causes interrupts to be created on a separate + stack instead of nesting the interrupts on the kernel stack. + +config IRQSTACKS_USEOCM + bool "Use OCM for interrupt stacks" + default n + depends on IRQSTACKS + help + Selecting this cause the interrupt stacks to be placed in OCM + reducing cache misses at the expense of using the OCM for servicing + interrupts. + +menu "OCM Instruction Heap" + +config OCM_MODULES_RESERVATION + int "OCM Instruction heap reservation. 0-192 kB" + range 0 192 + default "0" + help + The minimum amount of OCM memory to reserve for kernel loadable module + code. If you are not using this memory it cannot be used for anything + else. Leave it as 0 if you have prebuilt modules that are compiled with + OCM support. + +config OCM_MODULES_MAY_CONSUME_REMAINING_CODESPACE + bool "Give all unused ocm code space to the ocm instruction heap." + default n + help + Allow the OCM instruction heap allocation to consume any remaining + unused OCM code space. The result of this is that you will not have + and deterministic results, but you will not have any waste either. + +config OCM_MODULES_FALLBACK_TO_DDR + bool "Loadable Modules requiring OCM may fallback to use DDR." + default n + help + If a module cannot get the OCM code it requires allow DDR to + be used instead. +endmenu + +config HZ + int "Frequency of 'jiffies' (for polling)" + default 1000 + help + 100 is common for embedded systems, but 1000 allows + you to do more drivers without actually having + interrupts working properly. + +comment "RAM configuration" + +config MIN_RAMSIZE + hex "Minimum Size of RAM (in bytes)" + range 0x01000000 0x08000000 + default "0x02000000" + help + Define the minimum acceptable size of the system + RAM. Must be at least 16MB (0x01000000) + +comment "Build options" +config LINKER_RELAXATION + bool "Linker Relaxation" + default y + help + Turns on linker relaxation that will produce smaller + faster code. Increases link time. + +comment "Driver options" +menu "PCI Bus" +config PCI + bool "PCI bus" + default true + help + Enable/Disable PCI bus + source "drivers/pci/Kconfig" + + +config PCI_DEV0_IDSEL + hex "slot 0 address" + depends on PCI + default "0x01000000" + help + Slot 0 address. This address should correspond to the address line + which the IDSEL bit for this slot is connected to. + +config PCI_DEV1_IDSEL + hex "slot 1 address" + depends on PCI + default "0x02000000" + help + Slot 1 address. This address should correspond to the address line + which the IDSEL bit for this slot is connected to. +endmenu +# End PCI + +menu "Input devices" +config UBICOM_INPUT + bool "Ubicom polled GPIO input driver" + select INPUT + select INPUT_POLLDEV + help + Polling input driver, much like the GPIO input driver, except that it doesn't + rely on interrupts. It will report events via the input subsystem. + default n + +config UBICOM_INPUT_I2C + bool "Ubicom polled GPIO input driver over I2C" + select INPUT + select INPUT_POLLDEV + help + Polling input driver, much like the PCA953x driver, it can support a variety of + different I2C I/O expanders. This device polls the I2C I/O expander for events + and reports them via the input subsystem. + default n +endmenu +# Input devices + +source "arch/ubicom32/mach-common/Kconfig.switch" + +menu "Misc devices" +config UBICOM_HID + bool "Ubicom HID driver" + select INPUT + select INPUT_POLLDEV + select LCD_CLASS_DEVICE + help + Driver for HID chip found on some Ubicom reference designs. This chip handles + PWM, button input, and IR remote control. It registers as an input device and + a backlight device. + default n +endmenu +# Misc devices + +config CMDLINE_BOOL + bool "Built-in kernel command line" + default n + help + Allow for specifying boot arguments to the kernel at + build time. On some systems (e.g. embedded ones), it is + necessary or convenient to provide some or all of the + kernel boot arguments with the kernel itself (that is, + to not rely on the boot loader to provide them.) + + To compile command line arguments into the kernel, + set this option to 'Y', then fill in the + the boot arguments in CONFIG_CMDLINE. + + Systems with fully functional boot loaders (i.e. non-embedded) + should leave this option set to 'N'. + +config CMDLINE + string "Built-in kernel command string" + depends on CMDLINE_BOOL + default "" + help + Enter arguments here that should be compiled into the kernel + image and used at boot time. If the boot loader provides a + command line at boot time, it is appended to this string to + form the full kernel command line, when the system boots. + + However, you can use the CONFIG_CMDLINE_OVERRIDE option to + change this behavior. + + In most cases, the command line (whether built-in or provided + by the boot loader) should specify the device for the root + file system. + +config CMDLINE_OVERRIDE + bool "Built-in command line overrides boot loader arguments" + default n + depends on CMDLINE_BOOL + help + Set this option to 'Y' to have the kernel ignore the boot loader + command line, and use ONLY the built-in command line. + + This is used to work around broken boot loaders. This should + be set to 'N' under normal conditions. + +endmenu +# End Processor type and features + +source "arch/ubicom32/Kconfig.debug" + +menu "Executable file formats" +source "fs/Kconfig.binfmt" +endmenu + +source "init/Kconfig" +source "kernel/Kconfig.preempt" +source "kernel/time/Kconfig" +source "mm/Kconfig" +source "net/Kconfig" +source "drivers/Kconfig" +source "fs/Kconfig" +source "security/Kconfig" +source "crypto/Kconfig" +source "lib/Kconfig" diff --git a/target/linux/ubicom32/files/arch/ubicom32/Kconfig.debug b/target/linux/ubicom32/files/arch/ubicom32/Kconfig.debug new file mode 100644 index 0000000000..330c758061 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/Kconfig.debug @@ -0,0 +1,129 @@ +menu "Kernel hacking" + +config TRACE_IRQFLAGS_SUPPORT + def_bool y + +config DEBUG_VERBOSE + bool "Verbose fault messages" + default y + select PRINTK + help + When a program crashes due to an exception, or the kernel detects + an internal error, the kernel can print a not so brief message + explaining what the problem was. This debugging information is + useful to developers and kernel hackers when tracking down problems, + but mostly meaningless to other people. This is always helpful for + debugging but serves no purpose on a production system. + Most people should say N here. + +config PROTECT_KERNEL + default y + bool 'Enable Kernel range register Protection' + help + Adds code to enable/disable range registers to protect static + kernel code/data from userspace. Currently the ranges covered + do no protect kernel loadable modules or dynamically allocated + kernel data. + +config NO_KERNEL_MSG + bool "Suppress Kernel BUG Messages" + help + Do not output any debug BUG messages within the kernel. + +config EARLY_PRINTK + bool "Use the driver that you selected as console also for early printk (to debug kernel bootup)." + default n + help + If you want to use the serdes driver (console=ttyUS0) for + early printk, you must also supply an additional kernel boot + parameter like this: + + serdes=ioportaddr,irq,clockrate,baud + + For an IP7160RGW eval board, you could use this: + + serdes=0x2004000,61,250000000,57600 + + which will let you see early printk output at 57600 baud. + +config STOP_ON_TRAP + bool "Enable stopping at the LDSR for all traps" + default n + help + Cause the LDSR to stop all threads whenever a trap is about to be serviced + +config STOP_ON_BUG + bool "Enable stopping on failed BUG_ON()" + default n + help + Cause all BUG_ON failures to stop all threads + +config DEBUG_IRQMEASURE + bool "Enable IRQ handler measurements" + default n + help + When enabled each IRQ's min/avg/max times will be printed. If the handler + re-enables interrupt, the times will show the full time including to service + nested interrupts. See /proc/irq_measurements. + +config DEBUG_PCIMEASURE + bool "Enable PCI transaction measurements" + default n + help + When enabled the system will measure the min/avg/max timer for each PCI transactions. + See /proc/pci_measurements. + +config ACCESS_OK_CHECKS_ENABLED + bool "Enable user space access checks" + default n + help + Enabling this check causes the kernel to verify that addresses passed + to the kernel by the user space code are within the processes + address space. On a no-mmu system, this is done by examining the + processes memory data structures (adversly affecting performance) but + ensuring that a process does not ask the kernel to violate another + processes address space. Sadly, the kernel uses access_ok() for + address that are in the kernel which results in a large volume of + false positives. + +choice + prompt "Unaligned Access Support" + default UNALIGNED_ACCESS_ENABLED + help + Kernel / Userspace unaligned access handling. + +config UNALIGNED_ACCESS_ENABLED + bool "Kernel and Userspace" + help + +config UNALIGNED_ACCESS_USERSPACE_ONLY + bool "Userspace Only" + help + +config UNALIGNED_ACCESS_DISABLED + bool "Disabled" + help + +endchoice + +config DEBUG_STACKOVERFLOW + bool "Check for stack overflows" + default n + depends on DEBUG_KERNEL + help + This option will cause messages to be printed if free kernel stack space + drops below a certain limit (THREAD_SIZE /8). + +config DEBUG_STACK_USAGE + bool "Stack utilization instrumentation" + default n + depends on DEBUG_KERNEL + help + Enables the display of the minimum amount of free kernel stack which each + task has ever had available in the sysrq-T and sysrq-P debug output. + + This option will slow down process creation somewhat. + +source "lib/Kconfig.debug" + +endmenu diff --git a/target/linux/ubicom32/files/arch/ubicom32/Makefile b/target/linux/ubicom32/files/arch/ubicom32/Makefile new file mode 100644 index 0000000000..c5712d8c88 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/Makefile @@ -0,0 +1,104 @@ +# +# arch/ubicom32/Makefile +# <TODO: Replace with short file description> +# +# (C) Copyright 2009, Ubicom, Inc. +# +# This file is part of the Ubicom32 Linux Kernel Port. +# +# The Ubicom32 Linux Kernel Port is free software: you can redistribute +# it and/or modify it under the terms of the GNU General Public License +# as published by the Free Software Foundation, either version 2 of the +# License, or (at your option) any later version. +# +# The Ubicom32 Linux Kernel Port is distributed in the hope that it +# will be useful, but WITHOUT ANY WARRANTY; without even the implied +# warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See +# the GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with the Ubicom32 Linux Kernel Port. If not, +# see <http://www.gnu.org/licenses/>. +# +# Ubicom32 implementation derived from (with many thanks): +# arch/m68knommu +# arch/blackfin +# arch/parisc +# + +KBUILD_DEFCONFIG := + +# setup the machine name and machine dependent settings +machine-$(CONFIG_UBICOM32_V3) := ip5k +machine-$(CONFIG_UBICOM32_V4) := ip7k +MACHINE := $(machine-y) +export MACHINE + +model-$(CONFIG_RAMKERNEL) := ram +model-$(CONFIG_ROMKERNEL) := rom +MODEL := $(model-y) +export MODEL + +CPUCLASS := $(cpuclass-y) + +export CPUCLASS + +# +# We want the core kernel built using the fastcall ABI but modules need +# to be built using the slower calling convention because they could be +# loaded out of range for fast calls. +# +CFLAGS_KERNEL += -mfastcall +CFLAGS_MODULE += -mno-fastcall + +# +# Some CFLAG additions based on specific CPU type. +# +cflags-$(CONFIG_UBICOM32_V3) := -march=ubicom32v3 -DIP5000 +cflags-$(CONFIG_UBICOM32_V4) := -march=ubicom32v4 -DIP7000 + +ldflags-$(CONFIG_LINKER_RELAXATION) := --relax +LDFLAGS_vmlinux := $(ldflags-y) + +GCCLIBDIR := $(dir $(shell $(CC) $(cflags-y) -print-libgcc-file-name)) +GCC_LIBS := $(GCCLIBDIR)/libgcc.a + +KBUILD_CFLAGS += $(cflags-y) -ffunction-sections +KBUILD_AFLAGS += $(cflags-y) + +KBUILD_CFLAGS += -D__linux__ -Dlinux +KBUILD_CFLAGS += -DUTS_SYSNAME=\"uClinux\" + +# include any machine specific directory +ifneq ($(machine-y),) +core-y += arch/$(ARCH)/mach-$(MACHINE)/ +endif + +head-y := arch/$(ARCH)/kernel/head.o + +core-y += arch/$(ARCH)/kernel/ \ + arch/$(ARCH)/mm/ \ + arch/$(ARCH)/crypto/ \ + arch/$(ARCH)/mach-common/ + +drivers-$(CONFIG_OPROFILE) += arch/ubicom32/oprofile/ + +libs-y += arch/$(ARCH)/lib/ +libs-y += $(GCC_LIBS) + +archclean: + +# make sure developer has selected a valid board +ifeq ($(CONFIG_NOBOARD),y) +# $(error have to select a valid board file $(CONFIG_NOBOARD), please run kernel config again) +_all: config_board_error +endif + +config_board_error: + @echo "*************************************************" + @echo "You have not selected a proper board." + @echo "Please run menuconfig (or config) against your" + @echo "kernel and choose your board under Processor" + @echo "options" + @echo "*************************************************" + @exit 1 diff --git a/target/linux/ubicom32/files/arch/ubicom32/crypto/Makefile b/target/linux/ubicom32/files/arch/ubicom32/crypto/Makefile new file mode 100644 index 0000000000..2d8e5863c5 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/crypto/Makefile @@ -0,0 +1,36 @@ +# +# arch/ubicom32/crypto/Makefile +# <TODO: Replace with short file description> +# +# (C) Copyright 2009, Ubicom, Inc. +# +# This file is part of the Ubicom32 Linux Kernel Port. +# +# The Ubicom32 Linux Kernel Port is free software: you can redistribute +# it and/or modify it under the terms of the GNU General Public License +# as published by the Free Software Foundation, either version 2 of the +# License, or (at your option) any later version. +# +# The Ubicom32 Linux Kernel Port is distributed in the hope that it +# will be useful, but WITHOUT ANY WARRANTY; without even the implied +# warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See +# the GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with the Ubicom32 Linux Kernel Port. If not, +# see <http://www.gnu.org/licenses/>. +# +# Ubicom32 implementation derived from (with many thanks): +# arch/m68knommu +# arch/blackfin +# arch/parisc +# +obj-$(CONFIG_CRYPTO_UBICOM32) += crypto_ubicom32.o +obj-$(CONFIG_CRYPTO_AES_UBICOM32) += aes_ubicom32.o +obj-$(CONFIG_CRYPTO_DES_UBICOM32) += des.o +obj-$(CONFIG_CRYPTO_MD5_UBICOM32) += md5.o +obj-$(CONFIG_CRYPTO_SHA1_UBICOM32) += sha1.o + +des-y := des_ubicom32.o des_check_key.o +md5-y := md5_ubicom32.o md5_ubicom32_asm.o +sha1-y := sha1_ubicom32.o diff --git a/target/linux/ubicom32/files/arch/ubicom32/crypto/aes_ubicom32.c b/target/linux/ubicom32/files/arch/ubicom32/crypto/aes_ubicom32.c new file mode 100644 index 0000000000..f0b9f86bca --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/crypto/aes_ubicom32.c @@ -0,0 +1,458 @@ +/* + * arch/ubicom32/crypto/aes_ubicom32.c + * Ubicom32 implementation of the AES Cipher Algorithm. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#include <crypto/aes.h> +#include <crypto/algapi.h> +#include <linux/err.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/spinlock.h> +#include "crypto_ubicom32.h" +#include <asm/linkage.h> + +struct ubicom32_aes_ctx { + u8 key[AES_MAX_KEY_SIZE]; + u32 ctrl; + int key_len; +}; + +static inline void aes_hw_set_key(const u8 *key, u8 key_len) +{ + /* + * switch case has more overhead than 4 move.4 instructions, so just copy 256 bits + */ + SEC_SET_KEY_256(key); +} + +static inline void aes_hw_set_iv(const u8 *iv) +{ + SEC_SET_IV_4W(iv); +} + +static inline void aes_hw_cipher(u8 *out, const u8 *in) +{ + SEC_SET_INPUT_4W(in); + + asm volatile ( + " ; start AES by writing 0x40(SECURITY_BASE) \n\t" + " move.4 0x40(%0), #0x01 \n\t" + " pipe_flush 0 \n\t" + " \n\t" + " ; wait for the module to calculate the output \n\t" + " btst 0x04(%0), #0 \n\t" + " jmpne.f .-4 \n\t" + : + : "a" (SEC_BASE) + : "cc" + ); + + SEC_GET_OUTPUT_4W(out); +} + +static int __ocm_text aes_set_key(struct crypto_tfm *tfm, const u8 *in_key, + unsigned int key_len) +{ + struct ubicom32_aes_ctx *uctx = crypto_tfm_ctx(tfm); + + uctx->key_len = key_len; + memcpy(uctx->key, in_key, key_len); + + /* + * leave out HASH_ALG (none = 0), CBC (no = 0), DIR (unknown) yet + */ + switch (uctx->key_len) { + case 16: + uctx->ctrl = SEC_KEY_128_BITS | SEC_ALG_AES; + break; + case 24: + uctx->ctrl = SEC_KEY_192_BITS | SEC_ALG_AES; + break; + case 32: + uctx->ctrl = SEC_KEY_256_BITS | SEC_ALG_AES; + break; + } + + return 0; +} + +static inline void aes_cipher(struct crypto_tfm *tfm, u8 *out, const u8 *in, u32 extra_flags) +{ + const struct ubicom32_aes_ctx *uctx = crypto_tfm_ctx(tfm); + + hw_crypto_lock(); + hw_crypto_check(); + hw_crypto_set_ctrl(uctx->ctrl | extra_flags); + + aes_hw_set_key(uctx->key, uctx->key_len); + aes_hw_cipher(out, in); + + hw_crypto_unlock(); +} + +static void aes_encrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in) +{ + aes_cipher(tfm, out, in, SEC_DIR_ENCRYPT); +} + +static void aes_decrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in) +{ + aes_cipher(tfm, out, in, SEC_DIR_DECRYPT); +} + +static struct crypto_alg aes_alg = { + .cra_name = "aes", + .cra_driver_name = "aes-ubicom32", + .cra_priority = CRYPTO_UBICOM32_PRIORITY, + .cra_flags = CRYPTO_ALG_TYPE_CIPHER, + .cra_blocksize = AES_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct ubicom32_aes_ctx), + .cra_alignmask = CRYPTO_UBICOM32_ALIGNMENT - 1, + .cra_module = THIS_MODULE, + .cra_list = LIST_HEAD_INIT(aes_alg.cra_list), + .cra_u = { + .cipher = { + .cia_min_keysize = AES_MIN_KEY_SIZE, + .cia_max_keysize = AES_MAX_KEY_SIZE, + .cia_setkey = aes_set_key, + .cia_encrypt = aes_encrypt, + .cia_decrypt = aes_decrypt, + } + } +}; + +static void __ocm_text ecb_aes_crypt_loop(u8 *out, u8 *in, unsigned int n) +{ + while (likely(n)) { + aes_hw_cipher(out, in); + out += AES_BLOCK_SIZE; + in += AES_BLOCK_SIZE; + n -= AES_BLOCK_SIZE; + } +} + +static int __ocm_text ecb_aes_crypt(struct blkcipher_desc *desc, struct scatterlist *dst, + struct scatterlist *src, unsigned int nbytes, u32 extra_flags) +{ + const struct ubicom32_aes_ctx *uctx = crypto_blkcipher_ctx(desc->tfm); + int ret; + + struct blkcipher_walk walk; + blkcipher_walk_init(&walk, dst, src, nbytes); + ret = blkcipher_walk_virt(desc, &walk); + if (ret) { + return ret; + } + + hw_crypto_lock(); + hw_crypto_check(); + + hw_crypto_set_ctrl(uctx->ctrl | extra_flags); + aes_hw_set_key(uctx->key, uctx->key_len); + + while (likely((nbytes = walk.nbytes))) { + /* only use complete blocks */ + unsigned int n = nbytes & ~(AES_BLOCK_SIZE - 1); + u8 *out = walk.dst.virt.addr; + u8 *in = walk.src.virt.addr; + + /* finish n/16 blocks */ + ecb_aes_crypt_loop(out, in, n); + + nbytes &= AES_BLOCK_SIZE - 1; + ret = blkcipher_walk_done(desc, &walk, nbytes); + } + + hw_crypto_unlock(); + return ret; +} + +static int ecb_aes_encrypt(struct blkcipher_desc *desc, + struct scatterlist *dst, struct scatterlist *src, + unsigned int nbytes) +{ + return ecb_aes_crypt(desc, dst, src, nbytes, SEC_DIR_ENCRYPT); +} + +static int ecb_aes_decrypt(struct blkcipher_desc *desc, + struct scatterlist *dst, struct scatterlist *src, + unsigned int nbytes) +{ + return ecb_aes_crypt(desc, dst, src, nbytes, SEC_DIR_DECRYPT); +} + +static struct crypto_alg ecb_aes_alg = { + .cra_name = "ecb(aes)", + .cra_driver_name = "ecb-aes-ubicom32", + .cra_priority = CRYPTO_UBICOM32_COMPOSITE_PRIORITY, + .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER, + .cra_blocksize = AES_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct ubicom32_aes_ctx), + .cra_alignmask = CRYPTO_UBICOM32_ALIGNMENT - 1, + .cra_type = &crypto_blkcipher_type, + .cra_module = THIS_MODULE, + .cra_list = LIST_HEAD_INIT(ecb_aes_alg.cra_list), + .cra_u = { + .blkcipher = { + .min_keysize = AES_MIN_KEY_SIZE, + .max_keysize = AES_MAX_KEY_SIZE, + .setkey = aes_set_key, + .encrypt = ecb_aes_encrypt, + .decrypt = ecb_aes_decrypt, + } + } +}; + +#if CRYPTO_UBICOM32_LOOP_ASM +void __ocm_text cbc_aes_encrypt_loop(u8 *out, u8 *in, u8 *iv, unsigned int n) +{ + asm volatile ( + "; set init. iv 4w \n\t" + " move.4 0x50(%0), 0x0(%3) \n\t" + " move.4 0x54(%0), 0x4(%3) \n\t" + " move.4 0x58(%0), 0x8(%3) \n\t" + " move.4 0x5c(%0), 0xc(%3) \n\t" + " \n\t" + "; we know n > 0, so we can always \n\t" + "; load the first block \n\t" + "; set input 4w \n\t" + " move.4 0x30(%0), 0x0(%2) \n\t" + " move.4 0x34(%0), 0x4(%2) \n\t" + " move.4 0x38(%0), 0x8(%2) \n\t" + " move.4 0x3c(%0), 0xc(%2) \n\t" + " \n\t" + "; kickoff hw \n\t" + " move.4 0x40(%0), %2 \n\t" + " \n\t" + "; update n & flush \n\t" + " add.4 %4, #-16, %4 \n\t" + " pipe_flush 0 \n\t" + " \n\t" + "; while (n): work on 2nd block \n\t" + " 1: lsl.4 d15, %4, #0x0 \n\t" + " jmpeq.f 5f \n\t" + " \n\t" + "; set input 4w (2nd) \n\t" + " move.4 0x30(%0), 0x10(%2) \n\t" + " move.4 0x34(%0), 0x14(%2) \n\t" + " move.4 0x38(%0), 0x18(%2) \n\t" + " move.4 0x3c(%0), 0x1c(%2) \n\t" + " \n\t" + "; update n/in asap while waiting \n\t" + " add.4 %4, #-16, %4 \n\t" + " move.4 d15, 16(%2)++ \n\t" + " \n\t" + "; wait for the previous output \n\t" + " btst 0x04(%0), #0 \n\t" + " jmpne.f -4 \n\t" + " \n\t" + "; read previous output \n\t" + " move.4 0x0(%1), 0x50(%0) \n\t" + " move.4 0x4(%1), 0x54(%0) \n\t" + " move.4 0x8(%1), 0x58(%0) \n\t" + " move.4 0xc(%1), 0x5c(%0) \n\t" + " \n\t" + "; kick off hw for 2nd input \n\t" + " move.4 0x40(%0), %2 \n\t" + " \n\t" + "; update out asap \n\t" + " move.4 d15, 16(%1)++ \n\t" + " \n\t" + "; go back to loop \n\t" + " jmpt 1b \n\t" + " \n\t" + "; wait for last output \n\t" + " 5: btst 0x04(%0), #0 \n\t" + " jmpne.f -4 \n\t" + " \n\t" + "; read last output \n\t" + " move.4 0x0(%1), 0x50(%0) \n\t" + " move.4 0x4(%1), 0x54(%0) \n\t" + " move.4 0x8(%1), 0x58(%0) \n\t" + " move.4 0xc(%1), 0x5c(%0) \n\t" + " \n\t" + "; copy out iv \n\t" + " move.4 0x0(%3), 0x50(%0) \n\t" + " move.4 0x4(%3), 0x54(%0) \n\t" + " move.4 0x8(%3), 0x58(%0) \n\t" + " move.4 0xc(%3), 0x5c(%0) \n\t" + " \n\t" + : + : "a" (SEC_BASE), "a" (out), "a" (in), "a" (iv), "d" (n) + : "d15", "cc" + ); +} + +#else + +static void __ocm_text cbc_aes_encrypt_loop(u8 *out, u8 *in, u8 *iv, unsigned int n) +{ + aes_hw_set_iv(iv); + while (likely(n)) { + aes_hw_cipher(out, in); + out += AES_BLOCK_SIZE; + in += AES_BLOCK_SIZE; + n -= AES_BLOCK_SIZE; + } + SEC_COPY_4W(iv, out - AES_BLOCK_SIZE); +} + +#endif + +static void __ocm_text cbc_aes_decrypt_loop(u8 *out, u8 *in, u8 *iv, unsigned int n) +{ + while (likely(n)) { + aes_hw_set_iv(iv); + SEC_COPY_4W(iv, in); + aes_hw_cipher(out, in); + out += AES_BLOCK_SIZE; + in += AES_BLOCK_SIZE; + n -= AES_BLOCK_SIZE; + } +} + +static int __ocm_text cbc_aes_crypt(struct blkcipher_desc *desc, + struct scatterlist *dst, struct scatterlist *src, + unsigned int nbytes, u32 extra_flags) +{ + struct ubicom32_aes_ctx *uctx = crypto_blkcipher_ctx(desc->tfm); + int ret; + + struct blkcipher_walk walk; + blkcipher_walk_init(&walk, dst, src, nbytes); + ret = blkcipher_walk_virt(desc, &walk); + if (unlikely(ret)) { + return ret; + } + + hw_crypto_lock(); + hw_crypto_check(); + + hw_crypto_set_ctrl(uctx->ctrl | extra_flags); + aes_hw_set_key(uctx->key, uctx->key_len); + + while (likely((nbytes = walk.nbytes))) { + /* only use complete blocks */ + unsigned int n = nbytes & ~(AES_BLOCK_SIZE - 1); + if (likely(n)) { + u8 *out = walk.dst.virt.addr; + u8 *in = walk.src.virt.addr; + + if (extra_flags & SEC_DIR_ENCRYPT) { + cbc_aes_encrypt_loop(out, in, walk.iv, n); + } else { + cbc_aes_decrypt_loop(out, in, walk.iv, n); + } + } + + nbytes &= AES_BLOCK_SIZE - 1; + ret = blkcipher_walk_done(desc, &walk, nbytes); + } + hw_crypto_unlock(); + + return ret; +} + +static int __ocm_text cbc_aes_encrypt(struct blkcipher_desc *desc, + struct scatterlist *dst, struct scatterlist *src, + unsigned int nbytes) +{ + return cbc_aes_crypt(desc, dst, src, nbytes, SEC_DIR_ENCRYPT | SEC_CBC_SET); +} + +static int __ocm_text cbc_aes_decrypt(struct blkcipher_desc *desc, + struct scatterlist *dst, struct scatterlist *src, + unsigned int nbytes) +{ + return cbc_aes_crypt(desc, dst, src, nbytes, SEC_DIR_DECRYPT | SEC_CBC_SET); +} + +static struct crypto_alg cbc_aes_alg = { + .cra_name = "cbc(aes)", + .cra_driver_name = "cbc-aes-ubicom32", + .cra_priority = CRYPTO_UBICOM32_COMPOSITE_PRIORITY, + .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER, + .cra_blocksize = AES_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct ubicom32_aes_ctx), + .cra_alignmask = CRYPTO_UBICOM32_ALIGNMENT - 1, + .cra_type = &crypto_blkcipher_type, + .cra_module = THIS_MODULE, + .cra_list = LIST_HEAD_INIT(cbc_aes_alg.cra_list), + .cra_u = { + .blkcipher = { + .min_keysize = AES_MIN_KEY_SIZE, + .max_keysize = AES_MAX_KEY_SIZE, + .ivsize = AES_BLOCK_SIZE, + .setkey = aes_set_key, + .encrypt = cbc_aes_encrypt, + .decrypt = cbc_aes_decrypt, + } + } +}; + +static int __init aes_init(void) +{ + int ret; + + hw_crypto_init(); + + ret = crypto_register_alg(&aes_alg); + if (ret) + goto aes_err; + + ret = crypto_register_alg(&ecb_aes_alg); + if (ret) + goto ecb_aes_err; + + ret = crypto_register_alg(&cbc_aes_alg); + if (ret) + goto cbc_aes_err; + +out: + return ret; + +cbc_aes_err: + crypto_unregister_alg(&ecb_aes_alg); +ecb_aes_err: + crypto_unregister_alg(&aes_alg); +aes_err: + goto out; +} + +static void __exit aes_fini(void) +{ + crypto_unregister_alg(&cbc_aes_alg); + crypto_unregister_alg(&ecb_aes_alg); + crypto_unregister_alg(&aes_alg); +} + +module_init(aes_init); +module_exit(aes_fini); + +MODULE_ALIAS("aes"); + +MODULE_DESCRIPTION("Rijndael (AES) Cipher Algorithm"); +MODULE_LICENSE("GPL"); diff --git a/target/linux/ubicom32/files/arch/ubicom32/crypto/crypto_des.h b/target/linux/ubicom32/files/arch/ubicom32/crypto/crypto_des.h new file mode 100644 index 0000000000..3fc0ac3613 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/crypto/crypto_des.h @@ -0,0 +1,34 @@ +/* + * arch/ubicom32/crypto/crypto_des.h + * Function for checking keys for the DES and Triple DES Encryption + * algorithms. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef __CRYPTO_DES_H__ +#define __CRYPTO_DES_H__ + +extern int crypto_des_check_key(const u8*, unsigned int, u32*); + +#endif /* __CRYPTO_DES_H__ */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/crypto/crypto_ubicom32.c b/target/linux/ubicom32/files/arch/ubicom32/crypto/crypto_ubicom32.c new file mode 100644 index 0000000000..237ebbd9f2 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/crypto/crypto_ubicom32.c @@ -0,0 +1,50 @@ +/* + * arch/ubicom32/crypto/crypto_ubicom32.c + * Generic code to support ubicom32 hardware crypto accelerator + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#include "crypto_ubicom32.h" + +spinlock_t crypto_ubicom32_lock; +bool crypto_ubicom32_inited = false; +volatile bool crypto_ubicom32_on = false; +volatile unsigned long crypto_ubicom32_last_use; + +struct timer_list crypto_ubicom32_ps_timer; +void crypto_ubicom32_ps_check(unsigned long data) +{ + unsigned long idle_time = msecs_to_jiffies(HW_CRYPTO_PS_MAX_IDLE_MS); + + BUG_ON(!crypto_ubicom32_on); + + if (((jiffies - crypto_ubicom32_last_use) > idle_time) && spin_trylock_bh(&crypto_ubicom32_lock)) { + hw_crypto_turn_off(); + spin_unlock_bh(&crypto_ubicom32_lock); + return; + } + + /* keep monitoring */ + hw_crypto_ps_start(); +} diff --git a/target/linux/ubicom32/files/arch/ubicom32/crypto/crypto_ubicom32.h b/target/linux/ubicom32/files/arch/ubicom32/crypto/crypto_ubicom32.h new file mode 100644 index 0000000000..e754c19b90 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/crypto/crypto_ubicom32.h @@ -0,0 +1,346 @@ +/* + * arch/ubicom32/crypto/crypto_ubicom32.h + * Support for Ubicom32 cryptographic instructions. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _CRYPTO_ARCH_UBICOM32_CRYPT_H +#define _CRYPTO_ARCH_UBICOM32_CRYPT_H + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/jiffies.h> +#include <linux/timer.h> +#include <linux/spinlock.h> +#include <asm/errno.h> +#include <asm/io.h> +#include <asm/ip5000.h> + +#define CRYPTO_UBICOM32_LOOP_ASM 1 +#define CRYPTO_UBICOM32_ALIGNMENT 4 +#define SEC_ALIGNED(p) (((u32)p & 3) == 0) + +#define SEC_BASE SECURITY_BASE +#define SEC_KEY_OFFSET SECURITY_KEY_VALUE(0) +#define SEC_INPUT_OFFSET SECURITY_KEY_IN(0) +#define SEC_OUTPUT_OFFSET SECURITY_KEY_OUT(0) +#define SEC_HASH_OFFSET SECURITY_KEY_HASH(0) + +#define SEC_KEY_128_BITS SECURITY_CTRL_KEY_SIZE(0) +#define SEC_KEY_192_BITS SECURITY_CTRL_KEY_SIZE(1) +#define SEC_KEY_256_BITS SECURITY_CTRL_KEY_SIZE(2) + +#define SEC_HASH_NONE SECURITY_CTRL_HASH_ALG_NONE +#define SEC_HASH_MD5 SECURITY_CTRL_HASH_ALG_MD5 +#define SEC_HASH_SHA1 SECURITY_CTRL_HASH_ALG_SHA1 + +#define SEC_CBC_SET SECURITY_CTRL_CBC +#define SEC_CBC_NONE 0 + +#define SEC_ALG_AES SECURITY_CTRL_CIPHER_ALG_AES +#define SEC_ALG_NONE SECURITY_CTRL_CIPHER_ALG_NONE +#define SEC_ALG_DES SECURITY_CTRL_CIPHER_ALG_DES +#define SEC_ALG_3DES SECURITY_CTRL_CIPHER_ALG_3DES + +#define SEC_DIR_ENCRYPT SECURITY_CTRL_ENCIPHER +#define SEC_DIR_DECRYPT 0 + +#define CRYPTO_UBICOM32_PRIORITY 300 +#define CRYPTO_UBICOM32_COMPOSITE_PRIORITY 400 + +#define HW_CRYPTO_PS_MAX_IDLE_MS 100 /* idle time (ms) before shuting down sm */ + +extern spinlock_t crypto_ubicom32_lock; +extern bool crypto_ubicom32_inited; +extern volatile bool crypto_ubicom32_on; +extern volatile unsigned long crypto_ubicom32_last_use; +extern struct timer_list crypto_ubicom32_ps_timer; +extern void crypto_ubicom32_ps_check(unsigned long data); + +#define SEC_COPY_2W(t, s) \ + asm volatile ( \ + " move.4 0(%0), 0(%1) \n\t" \ + " move.4 4(%0), 4(%1) \n\t" \ + \ + : \ + : "a" (t), "a" (s) \ + ) + +#define SEC_COPY_4W(t, s) \ + asm volatile ( \ + " move.4 0(%0), 0(%1) \n\t" \ + " move.4 4(%0), 4(%1) \n\t" \ + " move.4 8(%0), 8(%1) \n\t" \ + " move.4 12(%0), 12(%1) \n\t" \ + : \ + : "a" (t), "a" (s) \ + ) + +#define SEC_COPY_5W(t, s) \ + asm volatile ( \ + " move.4 0(%0), 0(%1) \n\t" \ + " move.4 4(%0), 4(%1) \n\t" \ + " move.4 8(%0), 8(%1) \n\t" \ + " move.4 12(%0), 12(%1) \n\t" \ + " move.4 16(%0), 16(%1) \n\t" \ + : \ + : "a" (t), "a" (s) \ + ) + +#define SEC_SET_KEY_2W(x) \ + asm volatile ( \ + " ; write key to Security Keyblock \n\t" \ + " move.4 0x10(%0), 0(%1) \n\t" \ + " move.4 0x14(%0), 4(%1) \n\t" \ + : \ + : "a" (SECURITY_BASE), "a" (x) \ + ) + +#define SEC_SET_KEY_4W(x) \ + asm volatile ( \ + " ; write key to Security Keyblock \n\t" \ + " move.4 0x10(%0), 0(%1) \n\t" \ + " move.4 0x14(%0), 4(%1) \n\t" \ + " move.4 0x18(%0), 8(%1) \n\t" \ + " move.4 0x1c(%0), 12(%1) \n\t" \ + : \ + : "a"(SECURITY_BASE), "a"(x) \ + ) + +#define SEC_SET_KEY_6W(x) \ + asm volatile ( \ + " ; write key to Security Keyblock \n\t" \ + " move.4 0x10(%0), 0(%1) \n\t" \ + " move.4 0x14(%0), 4(%1) \n\t" \ + " move.4 0x18(%0), 8(%1) \n\t" \ + " move.4 0x1c(%0), 12(%1) \n\t" \ + " move.4 0x20(%0), 16(%1) \n\t" \ + " move.4 0x24(%0), 20(%1) \n\t" \ + : \ + : "a" (SECURITY_BASE), "a" (x) \ + ) + +#define SEC_SET_KEY_8W(x) \ + asm volatile ( \ + " ; write key to Security Keyblock \n\t" \ + " move.4 0x10(%0), 0(%1) \n\t" \ + " move.4 0x14(%0), 4(%1) \n\t" \ + " move.4 0x18(%0), 8(%1) \n\t" \ + " move.4 0x1c(%0), 12(%1) \n\t" \ + " move.4 0x20(%0), 16(%1) \n\t" \ + " move.4 0x24(%0), 20(%1) \n\t" \ + " move.4 0x28(%0), 24(%1) \n\t" \ + " move.4 0x2c(%0), 28(%1) \n\t" \ + : \ + : "a" (SECURITY_BASE), "a" (x) \ + ) + +#define SEC_SET_KEY_64(k) SEC_SET_KEY_2W(k) +#define SEC_SET_KEY_128(k) SEC_SET_KEY_4W(k) +#define SEC_SET_KEY_192(k) SEC_SET_KEY_6W(k) +#define SEC_SET_KEY_256(k) SEC_SET_KEY_8W(k) + +#define DES_SET_KEY(x) SEC_SET_KEY_64(x) +#define DES3_SET_KEY(x) SEC_SET_KEY_192(x) + +#define SEC_SET_INPUT_2W(x) \ + asm volatile ( \ + " ; write key to Security Keyblock \n\t" \ + " move.4 0x30(%0), 0(%1) \n\t" \ + " move.4 0x34(%0), 4(%1) \n\t" \ + : \ + : "a" (SECURITY_BASE), "a" (x) \ + ) + +#define SEC_GET_OUTPUT_2W(x) \ + asm volatile ( \ + " ; write key to Security Keyblock \n\t" \ + " move.4 0(%1), 0x50(%0) \n\t" \ + " move.4 4(%1), 0x54(%0) \n\t" \ + : \ + : "a" (SECURITY_BASE), "a" (x) \ + ) + +#define SEC_SET_INPUT_4W(x) \ + asm volatile ( \ + " ; write key to Security Keyblock \n\t" \ + " move.4 0x30(%0), 0(%1) \n\t" \ + " move.4 0x34(%0), 4(%1) \n\t" \ + " move.4 0x38(%0), 8(%1) \n\t" \ + " move.4 0x3c(%0), 12(%1) \n\t" \ + : \ + : "a" (SECURITY_BASE), "a" (x) \ + ) + +#define SEC_GET_OUTPUT_4W(x) \ + asm volatile ( \ + " ; read output from Security Keyblock \n\t" \ + " move.4 0(%1), 0x50(%0) \n\t" \ + " move.4 4(%1), 0x54(%0) \n\t" \ + " move.4 8(%1), 0x58(%0) \n\t" \ + " move.4 12(%1), 0x5c(%0) \n\t" \ + : \ + : "a" (SECURITY_BASE), "a" (x) \ + ) + +#define SEC_SET_IV_4W(x) \ + asm volatile ( \ + " ; write IV to Security Keyblock \n\t" \ + " move.4 0x50(%0), 0(%1) \n\t" \ + " move.4 0x54(%0), 4(%1) \n\t" \ + " move.4 0x58(%0), 8(%1) \n\t" \ + " move.4 0x5c(%0), 12(%1) \n\t" \ + : \ + : "a" (SECURITY_BASE), "a" (x) \ + ) + +#define SEC_PIPE_FLUSH() asm volatile ( " pipe_flush 0 \n\t" ) + +static inline void hw_crypto_set_ctrl(uint32_t c) +{ + asm volatile ( + " move.4 0(%0), %1 \n\t" + : + : "a" (SECURITY_BASE + SECURITY_CTRL), "d" (c) + ); +} + +static inline void hw_crypto_ps_start(void) +{ + crypto_ubicom32_ps_timer.expires = jiffies + msecs_to_jiffies(HW_CRYPTO_PS_MAX_IDLE_MS >> 1); + add_timer(&crypto_ubicom32_ps_timer); +} + +static inline void hw_crypto_turn_on(void) +{ + asm volatile ( + " moveai A4, %0 \n\t" + " bset 0x0(A4), 0x0(A4), %1 \n\t" + " cycles 11 \n\t" + : + : "i" (OCP_BASE >> 7), "i" (GEN_CLK_PLL_SECURITY_BIT_NO) + : "a4", "cc" + ); + crypto_ubicom32_on = true; +} + +static inline void hw_crypto_turn_off(void) +{ + asm volatile ( + " moveai A4, %0 \n\t" + " bclr 0x0(A4), 0x0(A4), %1 \n\t" + : + : "i" (OCP_BASE >> 7), "i" (GEN_CLK_PLL_SECURITY_BIT_NO) + : "a4", "cc" + ); + crypto_ubicom32_on = false; +} + +/* + * hw_crypto_check + * Most probably hw crypto is called in clusters and it makes no sense to turn it off + * and on and waster 13 cycles every time. + */ +static inline void hw_crypto_check(void) +{ + if (likely(crypto_ubicom32_on)) { + return; + } + crypto_ubicom32_last_use = jiffies; + hw_crypto_turn_on(); + hw_crypto_ps_start(); +} + +/* + * hw_crypto_ps_init + * Init power save timer + */ +static inline void hw_crypto_ps_init(void) +{ + init_timer_deferrable(&crypto_ubicom32_ps_timer); + crypto_ubicom32_ps_timer.function = crypto_ubicom32_ps_check; + crypto_ubicom32_ps_timer.data = 0; +} + +/* + * hw_crypto_init() + * Initialize OCP security module lock and disables its clock. + */ +static inline void hw_crypto_init(void) +{ + if (!crypto_ubicom32_inited) { + crypto_ubicom32_inited = true; + spin_lock_init(&crypto_ubicom32_lock); + hw_crypto_ps_init(); + hw_crypto_turn_off(); + } +} + +/* + * hw_crypto_lock() + * Locks the OCP security module and enables its clock. + */ +static inline void hw_crypto_lock(void) +{ + spin_lock_bh(&crypto_ubicom32_lock); +} + +/* + * hw_crypto_unlock() + * Unlocks the OCP security module and disables its clock. + */ +static inline void hw_crypto_unlock(void) +{ + crypto_ubicom32_last_use = jiffies; + spin_unlock_bh(&crypto_ubicom32_lock); +} + +#define CONFIG_CRYPTO_UBICOM32_DEBUG 1 + +#ifdef CONFIG_CRYPTO_UBICOM32_DEBUG +static inline void hex_dump(void *buf, int b_size, const char *msg) +{ + u8 *b = (u8 *)buf; + int i; + if (msg) { + printk("%s:\t", msg); + } + + for (i=0; i < b_size; i++) { + printk("%02x ", b[i]); + if ((i & 3) == 3) { + printk(" "); + } + if ((i & 31) == 31) { + printk("\n"); + } + } + printk("\n"); +} +#define UBICOM32_SEC_DUMP(a, b, c) hex_dump(a, b, c) +#else +#define UBICOM32_SEC_DUMP(a, b, c) +#endif + +#endif /* _CRYPTO_ARCH_UBICOM32_CRYPT_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/crypto/des_check_key.c b/target/linux/ubicom32/files/arch/ubicom32/crypto/des_check_key.c new file mode 100644 index 0000000000..162e52477c --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/crypto/des_check_key.c @@ -0,0 +1,148 @@ +/* + * arch/ubicom32/crypto/des_check_key.c + * Ubicom32 architecture function for checking keys for the DES and + * Tripple DES Encryption algorithms. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * Originally released as descore by Dana L. How <how@isl.stanford.edu>. + * Modified by Raimar Falke <rf13@inf.tu-dresden.de> for the Linux-Kernel. + * Derived from Cryptoapi and Nettle implementations, adapted for in-place + * scatterlist interface. Changed LGPL to GPL per section 3 of the LGPL. + * + * s390 Version: + * Copyright IBM Corp. 2003 + * Author(s): Thomas Spatzier + * Jan Glauber (jan.glauber@de.ibm.com) + * + * Derived from "crypto/des.c" + * Copyright (c) 1992 Dana L. How. + * Copyright (c) Raimar Falke <rf13@inf.tu-dresden.de> + * Copyright (c) Gisle Sflensminde <gisle@ii.uib.no> + * Copyright (C) 2001 Niels Mvller. + * Copyright (c) 2002 James Morris <jmorris@intercode.com.au> + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#include <linux/init.h> +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/crypto.h> +#include "crypto_des.h" + +#define ROR(d,c,o) ((d) = (d) >> (c) | (d) << (o)) + +static const u8 parity[] = { + 8,1,0,8,0,8,8,0,0,8,8,0,8,0,2,8,0,8,8,0,8,0,0,8,8,0,0,8,0,8,8,3, + 0,8,8,0,8,0,0,8,8,0,0,8,0,8,8,0,8,0,0,8,0,8,8,0,0,8,8,0,8,0,0,8, + 0,8,8,0,8,0,0,8,8,0,0,8,0,8,8,0,8,0,0,8,0,8,8,0,0,8,8,0,8,0,0,8, + 8,0,0,8,0,8,8,0,0,8,8,0,8,0,0,8,0,8,8,0,8,0,0,8,8,0,0,8,0,8,8,0, + 0,8,8,0,8,0,0,8,8,0,0,8,0,8,8,0,8,0,0,8,0,8,8,0,0,8,8,0,8,0,0,8, + 8,0,0,8,0,8,8,0,0,8,8,0,8,0,0,8,0,8,8,0,8,0,0,8,8,0,0,8,0,8,8,0, + 8,0,0,8,0,8,8,0,0,8,8,0,8,0,0,8,0,8,8,0,8,0,0,8,8,0,0,8,0,8,8,0, + 4,8,8,0,8,0,0,8,8,0,0,8,0,8,8,0,8,5,0,8,0,8,8,0,0,8,8,0,8,0,6,8, +}; + +/* + * RFC2451: Weak key checks SHOULD be performed. + */ +int +crypto_des_check_key(const u8 *key, unsigned int keylen, u32 *flags) +{ + u32 n, w; + + n = parity[key[0]]; n <<= 4; + n |= parity[key[1]]; n <<= 4; + n |= parity[key[2]]; n <<= 4; + n |= parity[key[3]]; n <<= 4; + n |= parity[key[4]]; n <<= 4; + n |= parity[key[5]]; n <<= 4; + n |= parity[key[6]]; n <<= 4; + n |= parity[key[7]]; + w = 0x88888888L; + + if ((*flags & CRYPTO_TFM_REQ_WEAK_KEY) + && !((n - (w >> 3)) & w)) { /* 1 in 10^10 keys passes this test */ + if (n < 0x41415151) { + if (n < 0x31312121) { + if (n < 0x14141515) { + /* 01 01 01 01 01 01 01 01 */ + if (n == 0x11111111) goto weak; + /* 01 1F 01 1F 01 0E 01 0E */ + if (n == 0x13131212) goto weak; + } else { + /* 01 E0 01 E0 01 F1 01 F1 */ + if (n == 0x14141515) goto weak; + /* 01 FE 01 FE 01 FE 01 FE */ + if (n == 0x16161616) goto weak; + } + } else { + if (n < 0x34342525) { + /* 1F 01 1F 01 0E 01 0E 01 */ + if (n == 0x31312121) goto weak; + /* 1F 1F 1F 1F 0E 0E 0E 0E (?) */ + if (n == 0x33332222) goto weak; + } else { + /* 1F E0 1F E0 0E F1 0E F1 */ + if (n == 0x34342525) goto weak; + /* 1F FE 1F FE 0E FE 0E FE */ + if (n == 0x36362626) goto weak; + } + } + } else { + if (n < 0x61616161) { + if (n < 0x44445555) { + /* E0 01 E0 01 F1 01 F1 01 */ + if (n == 0x41415151) goto weak; + /* E0 1F E0 1F F1 0E F1 0E */ + if (n == 0x43435252) goto weak; + } else { + /* E0 E0 E0 E0 F1 F1 F1 F1 (?) */ + if (n == 0x44445555) goto weak; + /* E0 FE E0 FE F1 FE F1 FE */ + if (n == 0x46465656) goto weak; + } + } else { + if (n < 0x64646565) { + /* FE 01 FE 01 FE 01 FE 01 */ + if (n == 0x61616161) goto weak; + /* FE 1F FE 1F FE 0E FE 0E */ + if (n == 0x63636262) goto weak; + } else { + /* FE E0 FE E0 FE F1 FE F1 */ + if (n == 0x64646565) goto weak; + /* FE FE FE FE FE FE FE FE */ + if (n == 0x66666666) goto weak; + } + } + } + } + return 0; +weak: + *flags |= CRYPTO_TFM_RES_WEAK_KEY; + return -EINVAL; +} + +EXPORT_SYMBOL(crypto_des_check_key); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Key Check function for DES & DES3 Cipher Algorithms"); diff --git a/target/linux/ubicom32/files/arch/ubicom32/crypto/des_ubicom32.c b/target/linux/ubicom32/files/arch/ubicom32/crypto/des_ubicom32.c new file mode 100644 index 0000000000..14e5fb24e6 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/crypto/des_ubicom32.c @@ -0,0 +1,761 @@ +/* + * arch/ubicom32/crypto/des_ubicom32.c + * Ubicom32 implementation of the DES Cipher Algorithm. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#include <crypto/algapi.h> +#include <linux/init.h> +#include <linux/module.h> + +#include "crypto_ubicom32.h" +extern int crypto_des_check_key(const u8 *key, unsigned int keylen, u32 *flags); + +#define DES_BLOCK_SIZE 8 +#define DES_KEY_SIZE 8 + +#define DES3_192_KEY_SIZE (3 * DES_KEY_SIZE) +#define DES3_192_BLOCK_SIZE DES_BLOCK_SIZE + +#define DES3_SUB_KEY(key, i) (((u8 *)key) + (i * DES_KEY_SIZE)) + +enum des_ops { + DES_ENCRYPT, + DES_DECRYPT, + + DES3_EDE_ENCRYPT, + DES3_EDE_DECRYPT, + +#ifdef DES3_EEE + DES3_EEE_ENCRYPT, + DES3_EEE_DECRYPT, +#endif +}; + +struct ubicom32_des_ctx { + u8 key[3 * DES_KEY_SIZE]; + u32 ctrl; + int key_len; +}; + +static inline void des_hw_set_key(const u8 *key, u8 key_len) +{ + /* + * HW 3DES is not tested yet, use DES just as ipOS + */ + DES_SET_KEY(key); +} + +static inline void des_hw_cipher(u8 *out, const u8 *in) +{ + SEC_SET_INPUT_2W(in); + + asm volatile ( + " ; start DES by writing 0x38(SECURITY_BASE) \n\t" + " move.4 0x38(%0), #0x01 \n\t" + " pipe_flush 0 \n\t" + " \n\t" + " ; wait for the module to calculate the output \n\t" + " btst 0x04(%0), #0 \n\t" + " jmpne.f .-4 \n\t" + : + : "a" (SEC_BASE) + : "cc" + ); + + SEC_GET_OUTPUT_2W(out); +} + + +static void inline des3_hw_ede_encrypt(u8 *keys, u8 *out, const u8 *in) +{ + hw_crypto_set_ctrl(SEC_ALG_DES | SEC_DIR_ENCRYPT); + des_hw_set_key(DES3_SUB_KEY(keys, 0), DES_KEY_SIZE); + des_hw_cipher(out, in); + + hw_crypto_set_ctrl(SEC_ALG_DES | SEC_DIR_DECRYPT); + des_hw_set_key(DES3_SUB_KEY(keys, 1), DES_KEY_SIZE); + des_hw_cipher(out, out); + + hw_crypto_set_ctrl(SEC_ALG_DES | SEC_DIR_ENCRYPT); + des_hw_set_key(DES3_SUB_KEY(keys, 2), DES_KEY_SIZE); + des_hw_cipher(out, out); +} + +static void inline des3_hw_ede_decrypt(u8 *keys, u8 *out, const u8 *in) +{ + hw_crypto_set_ctrl(SEC_ALG_DES | SEC_DIR_DECRYPT); + des_hw_set_key(DES3_SUB_KEY(keys, 2), DES_KEY_SIZE); + des_hw_cipher(out, in); + + hw_crypto_set_ctrl(SEC_ALG_DES | SEC_DIR_ENCRYPT); + des_hw_set_key(DES3_SUB_KEY(keys, 1), DES_KEY_SIZE); + des_hw_cipher(out, out); + + hw_crypto_set_ctrl(SEC_ALG_DES | SEC_DIR_DECRYPT); + des_hw_set_key(DES3_SUB_KEY(keys, 0), DES_KEY_SIZE); + des_hw_cipher(out, out); +} + +#ifdef DES3_EEE +static void inline des3_hw_eee_encrypt(u8 *keys, u8 *out, const u8 *in) +{ + hw_crypto_set_ctrl(SEC_ALG_DES | SEC_DIR_ENCRYPT); + des_hw_set_key(DES3_SUB_KEY(keys, 0), 2); + des_hw_cipher(out, in); + + hw_crypto_set_ctrl(SEC_ALG_DES | SEC_DIR_ENCRYPT); + des_hw_set_key(DES3_SUB_KEY(keys, 1), 2); + des_hw_cipher(out, out); + + hw_crypto_set_ctrl(SEC_ALG_DES | SEC_DIR_ENCRYPT); + des_hw_set_key(DES3_SUB_KEY(keys, 2), 2); + des_hw_cipher(out, out); +} + +static void inline des3_hw_eee_decrypt(u8 *keys, u8 *out, const u8 *in) +{ + hw_crypto_set_ctrl(SEC_ALG_DES | SEC_DIR_DECRYPT); + des_hw_set_key(DES3_SUB_KEY(keys, 2), 2); + des_hw_cipher(out, in); + + hw_crypto_set_ctrl(SEC_ALG_DES | SEC_DIR_DECRYPT); + des_hw_set_key(DES3_SUB_KEY(keys, 1), 2); + des_hw_cipher(out, out); + + hw_crypto_set_ctrl(SEC_ALG_DES | SEC_DIR_DECRYPT); + des_hw_set_key(DES3_SUB_KEY(keys, 0), 2); + des_hw_cipher(out, out); +} +#endif + +static int des_setkey(struct crypto_tfm *tfm, const u8 *key, + unsigned int keylen) +{ + struct ubicom32_des_ctx *dctx = crypto_tfm_ctx(tfm); + u32 *flags = &tfm->crt_flags; + int ret; + + /* test if key is valid (not a weak key) */ + ret = crypto_des_check_key(key, keylen, flags); + if (ret == 0) { + memcpy(dctx->key, key, keylen); + dctx->key_len = keylen; + //dctx->ctrl = (keylen == DES_KEY_SIZE) ? SEC_ALG_DES : SEC_ALG_3DES + /* 2DES and 3DES are both implemented with DES hw function */ + dctx->ctrl = SEC_ALG_DES; + } + return ret; +} + +static inline void des_cipher_1b(struct crypto_tfm *tfm, u8 *out, const u8 *in, u32 extra_flags) +{ + const struct ubicom32_des_ctx *uctx = crypto_tfm_ctx(tfm); + + hw_crypto_lock(); + hw_crypto_check(); + hw_crypto_set_ctrl(uctx->ctrl | extra_flags); + + des_hw_set_key(uctx->key, uctx->key_len); + des_hw_cipher(out, in); + + hw_crypto_unlock(); +} + +static void des_encrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in) +{ + des_cipher_1b(tfm, out, in, SEC_DIR_ENCRYPT); +} + +static void des_decrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in) +{ + des_cipher_1b(tfm, out, in, SEC_DIR_DECRYPT); +} + +static struct crypto_alg des_alg = { + .cra_name = "des", + .cra_driver_name = "des-ubicom32", + .cra_priority = CRYPTO_UBICOM32_PRIORITY, + .cra_flags = CRYPTO_ALG_TYPE_CIPHER, + .cra_blocksize = DES_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct ubicom32_des_ctx), + .cra_alignmask = CRYPTO_UBICOM32_ALIGNMENT - 1, + .cra_alignmask = CRYPTO_UBICOM32_ALIGNMENT - 1, + .cra_module = THIS_MODULE, + .cra_list = LIST_HEAD_INIT(des_alg.cra_list), + .cra_u = { + .cipher = { + .cia_min_keysize = DES_KEY_SIZE, + .cia_max_keysize = DES_KEY_SIZE, + .cia_setkey = des_setkey, + .cia_encrypt = des_encrypt, + .cia_decrypt = des_decrypt, + } + } +}; + +static void ecb_des_ciper_loop(u8 *out, u8 *in, unsigned int n) +{ + while (likely(n)) { + des_hw_cipher(out, in); + out += DES_BLOCK_SIZE; + in += DES_BLOCK_SIZE; + n -= DES_BLOCK_SIZE; + } +} + +static void ecb_des3_ede_encrypt_loop(u8 *keys, u8 *out, u8 *in, unsigned int n) +{ + while (likely(n)) { + des3_hw_ede_encrypt(keys, out, in); + + out += DES_BLOCK_SIZE; + in += DES_BLOCK_SIZE; + n -= DES_BLOCK_SIZE; + } +} + +static void ecb_des3_ede_decrypt_loop(u8 *keys, u8 *out, u8 *in, unsigned int n) +{ + while (likely(n)) { + des3_hw_ede_decrypt(keys, out, in); + + out += DES_BLOCK_SIZE; + in += DES_BLOCK_SIZE; + n -= DES_BLOCK_SIZE; + } +} + +#ifdef DES3_EEE +static void ecb_des3_eee_encrypt_loop(u8 *keys, u8 *out, u8 *in, unsigned int n) +{ + while (likely(n)) { + des3_hw_eee_encrypt(keys, out, in); + + out += DES_BLOCK_SIZE; + in += DES_BLOCK_SIZE; + n -= DES_BLOCK_SIZE; + } +} + +static void ecb_des3_eee_decrypt_loop(u8 *keys, u8 *out, u8 *in, unsigned int n) +{ + while (likely(n)) { + des3_hw_eee_decrypt(keys, out, in); + + out += DES_BLOCK_SIZE; + in += DES_BLOCK_SIZE; + n -= DES_BLOCK_SIZE; + } +} +#endif + +static inline void ecb_des_cipher_n(struct ubicom32_des_ctx *uctx, enum des_ops op, u8 *out, u8 *in, unsigned int n) +{ + switch (op) { + case DES_ENCRYPT: + case DES_DECRYPT: + /* set the right algo, direction and key once */ + hw_crypto_set_ctrl(SEC_ALG_DES | (op == DES_ENCRYPT ? SEC_DIR_ENCRYPT : 0)); + des_hw_set_key(uctx->key, uctx->key_len); + ecb_des_ciper_loop(out, in, n); + break; + + case DES3_EDE_ENCRYPT: + ecb_des3_ede_encrypt_loop(uctx->key, out, in, n); + break; + + case DES3_EDE_DECRYPT: + ecb_des3_ede_decrypt_loop(uctx->key, out, in, n); + break; + +#ifdef DES3_EEE + case DES3_EEE_ENCRYPT: + ecb_des3_eee_encrypt_loop(uctx->key, out, in, n); + break; + + case DES3_EEE_DECRYPT: + ecb_des3_eee_decrypt_loop(uctx->key, out, in, n); + break; +#endif + } +} + +static inline void des_xor_2w(u32 *data, u32 *iv) +{ + data[0] ^= iv[0]; + data[1] ^= iv[1]; +} + +static void cbc_des_encrypt_loop(u8 *out, u8 *in, u8 *iv, unsigned int n) +{ + while (likely(n)) { + des_xor_2w((u32 *)in, (u32 *)iv); + des_hw_cipher(out, in); + SEC_COPY_2W(iv, out); + out += DES_BLOCK_SIZE; + in += DES_BLOCK_SIZE; + n -= DES_BLOCK_SIZE; + } +} + +static void cbc_des_decrypt_loop(u8 *out, u8 *in, u8 *iv, unsigned int n) +{ + u8 next_iv[DES_BLOCK_SIZE]; + while (likely(n)) { + SEC_COPY_2W(next_iv, in); + des_hw_cipher(out, in); + des_xor_2w((u32 *)out, (u32 *)iv); + SEC_COPY_2W(iv, next_iv); + + out += DES_BLOCK_SIZE; + in += DES_BLOCK_SIZE; + n -= DES_BLOCK_SIZE; + } +} + +static void cbc_des3_ede_encrypt_loop(u8 *keys, u8 *out, u8 *in, u8 *iv, unsigned int n) +{ + while (likely(n)) { + des_xor_2w((u32 *)in, (u32 *)iv); + des3_hw_ede_encrypt(keys, out, in); + SEC_COPY_2W(iv, out); + + out += DES_BLOCK_SIZE; + in += DES_BLOCK_SIZE; + n -= DES_BLOCK_SIZE; + } +} + +static void cbc_des3_ede_decrypt_loop(u8 *keys, u8 *out, u8 *in, u8 *iv, unsigned int n) +{ + u8 next_iv[DES_BLOCK_SIZE]; + while (likely(n)) { + SEC_COPY_2W(next_iv, in); + des3_hw_ede_decrypt(keys, out, in); + des_xor_2w((u32 *)out, (u32 *)iv); + SEC_COPY_2W(iv, next_iv); + + out += DES_BLOCK_SIZE; + in += DES_BLOCK_SIZE; + n -= DES_BLOCK_SIZE; + } +} + +#ifdef DES3_EEE +static void cbc_des3_eee_encrypt_loop(u8 *keys, u8 *out, u8 *in, u8 *iv, unsigned int n) +{ + while (likely(n)) { + des_xor_2w((u32 *)in, (u32 *)iv); + des3_hw_eee_encrypt(keys, out, in); + SEC_COPY_2W(iv, out); + + out += DES_BLOCK_SIZE; + in += DES_BLOCK_SIZE; + n -= DES_BLOCK_SIZE; + } +} + +static void cbc_des3_eee_decrypt_loop(u8 *keys, u8 *out, u8 *in, u8 *iv, unsigned int n) +{ + u8 next_iv[DES_BLOCK_SIZE]; + while (likely(n)) { + SEC_COPY_2W(next_iv, in); + des3_hw_eee_decrypt(keys, out, in); + des_xor_2w((u32 *)out, (u32 *)iv); + SEC_COPY_2W(iv, next_iv); + + out += DES_BLOCK_SIZE; + in += DES_BLOCK_SIZE; + n -= DES_BLOCK_SIZE; + } +} +#endif + +static inline void cbc_des_cipher_n(struct ubicom32_des_ctx *uctx, enum des_ops op, u8 *out, u8 *in, u8 *iv, unsigned int n) +{ + switch (op) { + case DES_ENCRYPT: + hw_crypto_set_ctrl(SEC_ALG_DES | SEC_DIR_ENCRYPT); + des_hw_set_key(uctx->key, uctx->key_len); + cbc_des_encrypt_loop(out, in, iv, n); + break; + + case DES_DECRYPT: + /* set the right algo, direction and key once */ + hw_crypto_set_ctrl(SEC_ALG_DES | SEC_DIR_DECRYPT); + des_hw_set_key(uctx->key, uctx->key_len); + cbc_des_decrypt_loop(out, in, iv, n); + break; + + case DES3_EDE_ENCRYPT: + cbc_des3_ede_encrypt_loop(uctx->key, out, in, iv, n); + break; + + case DES3_EDE_DECRYPT: + cbc_des3_ede_decrypt_loop(uctx->key, out, in, iv, n); + break; + +#ifdef DES3_EEE + case DES3_EEE_ENCRYPT: + cbc_des3_eee_encrypt_loop(uctx->key, out, in, iv, n); + break; + + case DES3_EEE_DECRYPT: + cbc_des3_eee_decrypt_loop(uctx->key, out, in, iv, n); + break; +#endif + } +} + +static int des_cipher(struct blkcipher_desc *desc, struct scatterlist *dst, + struct scatterlist *src, unsigned int nbytes, u32 extra_flags, enum des_ops op) +{ + struct ubicom32_des_ctx *uctx = crypto_blkcipher_ctx(desc->tfm); + int ret; + + struct blkcipher_walk walk; + blkcipher_walk_init(&walk, dst, src, nbytes); + ret = blkcipher_walk_virt(desc, &walk); + if (ret) { + return ret; + } + + hw_crypto_lock(); + hw_crypto_check(); + + while ((nbytes = walk.nbytes)) { + /* only use complete blocks */ + unsigned int n = nbytes & ~(DES_BLOCK_SIZE - 1); + u8 *out = walk.dst.virt.addr; + u8 *in = walk.src.virt.addr; + + /* finish n/16 blocks */ + if (extra_flags & SEC_CBC_SET) { + cbc_des_cipher_n(uctx, op, out, in, walk.iv, n); + } else { + ecb_des_cipher_n(uctx, op, out, in, n); + } + + nbytes &= DES_BLOCK_SIZE - 1; + ret = blkcipher_walk_done(desc, &walk, nbytes); + } + + hw_crypto_unlock(); + return ret; +} + +static int ecb_des_encrypt(struct blkcipher_desc *desc, + struct scatterlist *dst, struct scatterlist *src, + unsigned int nbytes) +{ + return des_cipher(desc, dst, src, nbytes, SEC_CBC_NONE, DES_ENCRYPT); +} + +static int ecb_des_decrypt(struct blkcipher_desc *desc, + struct scatterlist *dst, struct scatterlist *src, + unsigned int nbytes) +{ + return des_cipher(desc, dst, src, nbytes, SEC_CBC_NONE, DES_DECRYPT); +} + +static struct crypto_alg ecb_des_alg = { + .cra_name = "ecb(des)", + .cra_driver_name = "ecb-des-ubicom32", + .cra_priority = CRYPTO_UBICOM32_COMPOSITE_PRIORITY, + .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER, + .cra_blocksize = DES_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct ubicom32_des_ctx), + .cra_alignmask = CRYPTO_UBICOM32_ALIGNMENT - 1, + .cra_type = &crypto_blkcipher_type, + .cra_module = THIS_MODULE, + .cra_list = LIST_HEAD_INIT(ecb_des_alg.cra_list), + .cra_u = { + .blkcipher = { + .min_keysize = DES_KEY_SIZE, + .max_keysize = DES_KEY_SIZE, + .setkey = des_setkey, + .encrypt = ecb_des_encrypt, + .decrypt = ecb_des_decrypt, + } + } +}; + +static int cbc_des_encrypt(struct blkcipher_desc *desc, + struct scatterlist *dst, struct scatterlist *src, + unsigned int nbytes) +{ + return des_cipher(desc, dst, src, nbytes, SEC_CBC_SET, DES_ENCRYPT); +} + +static int cbc_des_decrypt(struct blkcipher_desc *desc, + struct scatterlist *dst, struct scatterlist *src, + unsigned int nbytes) +{ + return des_cipher(desc, dst, src, nbytes, SEC_CBC_SET, DES_DECRYPT); +} + +static struct crypto_alg cbc_des_alg = { + .cra_name = "cbc(des)", + .cra_driver_name = "cbc-des-ubicom32", + .cra_priority = CRYPTO_UBICOM32_COMPOSITE_PRIORITY, + .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER, + .cra_blocksize = DES_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct ubicom32_des_ctx), + .cra_alignmask = CRYPTO_UBICOM32_ALIGNMENT - 1, + .cra_type = &crypto_blkcipher_type, + .cra_module = THIS_MODULE, + .cra_list = LIST_HEAD_INIT(cbc_des_alg.cra_list), + .cra_u = { + .blkcipher = { + .min_keysize = DES_KEY_SIZE, + .max_keysize = DES_KEY_SIZE, + .ivsize = DES_BLOCK_SIZE, + .setkey = des_setkey, + .encrypt = cbc_des_encrypt, + .decrypt = cbc_des_decrypt, + } + } +}; + +/* + * RFC2451: + * + * For DES-EDE3, there is no known need to reject weak or + * complementation keys. Any weakness is obviated by the use of + * multiple keys. + * + * However, if the first two or last two independent 64-bit keys are + * equal (k1 == k2 or k2 == k3), then the DES3 operation is simply the + * same as DES. Implementers MUST reject keys that exhibit this + * property. + * + */ +static int des3_192_setkey(struct crypto_tfm *tfm, const u8 *key, + unsigned int keylen) +{ + int i, ret; + struct ubicom32_des_ctx *dctx = crypto_tfm_ctx(tfm); + const u8 *temp_key = key; + u32 *flags = &tfm->crt_flags; + + if (!(memcmp(key, &key[DES_KEY_SIZE], DES_KEY_SIZE) && + memcmp(&key[DES_KEY_SIZE], &key[DES_KEY_SIZE * 2], + DES_KEY_SIZE))) { + + *flags |= CRYPTO_TFM_RES_BAD_KEY_SCHED; + return -EINVAL; + } + for (i = 0; i < 3; i++, temp_key += DES_KEY_SIZE) { + ret = crypto_des_check_key(temp_key, DES_KEY_SIZE, flags); + if (ret < 0) + return ret; + } + memcpy(dctx->key, key, keylen); + dctx->ctrl = SEC_ALG_DES; //hw 3DES not working yet + dctx->key_len = keylen; + return 0; +} + +static void des3_192_encrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src) +{ + struct ubicom32_des_ctx *uctx = crypto_tfm_ctx(tfm); + + hw_crypto_lock(); + hw_crypto_check(); + + des3_hw_ede_encrypt(uctx->key, dst, src); + + hw_crypto_unlock(); +} + +static void des3_192_decrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src) +{ + struct ubicom32_des_ctx *uctx = crypto_tfm_ctx(tfm); + + hw_crypto_lock(); + hw_crypto_check(); + + des3_hw_ede_decrypt(uctx->key, dst, src); + + hw_crypto_unlock(); +} + +static struct crypto_alg des3_192_alg = { + .cra_name = "des3_ede", + .cra_driver_name = "des3_ede-ubicom32", + .cra_priority = CRYPTO_UBICOM32_PRIORITY, + .cra_flags = CRYPTO_ALG_TYPE_CIPHER, + .cra_blocksize = DES3_192_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct ubicom32_des_ctx), + .cra_alignmask = CRYPTO_UBICOM32_ALIGNMENT - 1, + .cra_module = THIS_MODULE, + .cra_list = LIST_HEAD_INIT(des3_192_alg.cra_list), + .cra_u = { + .cipher = { + .cia_min_keysize = DES3_192_KEY_SIZE, + .cia_max_keysize = DES3_192_KEY_SIZE, + .cia_setkey = des3_192_setkey, + .cia_encrypt = des3_192_encrypt, + .cia_decrypt = des3_192_decrypt, + } + } +}; + +static int ecb_des3_192_encrypt(struct blkcipher_desc *desc, + struct scatterlist *dst, + struct scatterlist *src, unsigned int nbytes) +{ + return des_cipher(desc, dst, src, nbytes, SEC_CBC_NONE, DES3_EDE_ENCRYPT); +} + +static int ecb_des3_192_decrypt(struct blkcipher_desc *desc, + struct scatterlist *dst, + struct scatterlist *src, unsigned int nbytes) +{ + return des_cipher(desc, dst, src, nbytes, SEC_CBC_NONE, DES3_EDE_DECRYPT); +} + +static struct crypto_alg ecb_des3_192_alg = { + .cra_name = "ecb(des3_ede)", + .cra_driver_name = "ecb-des3_ede-ubicom32", + .cra_priority = CRYPTO_UBICOM32_COMPOSITE_PRIORITY, + .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER, + .cra_blocksize = DES3_192_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct ubicom32_des_ctx), + .cra_alignmask = CRYPTO_UBICOM32_ALIGNMENT - 1, + .cra_type = &crypto_blkcipher_type, + .cra_module = THIS_MODULE, + .cra_list = LIST_HEAD_INIT( + ecb_des3_192_alg.cra_list), + .cra_u = { + .blkcipher = { + .min_keysize = DES3_192_KEY_SIZE, + .max_keysize = DES3_192_KEY_SIZE, + .setkey = des3_192_setkey, + .encrypt = ecb_des3_192_encrypt, + .decrypt = ecb_des3_192_decrypt, + } + } +}; + +static int cbc_des3_192_encrypt(struct blkcipher_desc *desc, + struct scatterlist *dst, + struct scatterlist *src, unsigned int nbytes) +{ + return des_cipher(desc, dst, src, nbytes, SEC_CBC_SET, DES3_EDE_ENCRYPT); +} + +static int cbc_des3_192_decrypt(struct blkcipher_desc *desc, + struct scatterlist *dst, + struct scatterlist *src, unsigned int nbytes) +{ + return des_cipher(desc, dst, src, nbytes, SEC_CBC_SET, DES3_EDE_DECRYPT); +} + +static struct crypto_alg cbc_des3_192_alg = { + .cra_name = "cbc(des3_ede)", + .cra_driver_name = "cbc-des3_ede-ubicom32", + .cra_priority = CRYPTO_UBICOM32_COMPOSITE_PRIORITY, + .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER, + .cra_blocksize = DES3_192_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct ubicom32_des_ctx), + .cra_alignmask = CRYPTO_UBICOM32_ALIGNMENT - 1, + .cra_type = &crypto_blkcipher_type, + .cra_module = THIS_MODULE, + .cra_list = LIST_HEAD_INIT( + cbc_des3_192_alg.cra_list), + .cra_u = { + .blkcipher = { + .min_keysize = DES3_192_KEY_SIZE, + .max_keysize = DES3_192_KEY_SIZE, + .ivsize = DES3_192_BLOCK_SIZE, + .setkey = des3_192_setkey, + .encrypt = cbc_des3_192_encrypt, + .decrypt = cbc_des3_192_decrypt, + } + } +}; + +static int init(void) +{ + int ret = 0; + + hw_crypto_init(); + + ret = crypto_register_alg(&des_alg); + if (ret) + goto des_err; + ret = crypto_register_alg(&ecb_des_alg); + if (ret) + goto ecb_des_err; + ret = crypto_register_alg(&cbc_des_alg); + if (ret) + goto cbc_des_err; + + ret = crypto_register_alg(&des3_192_alg); + if (ret) + goto des3_192_err; + ret = crypto_register_alg(&ecb_des3_192_alg); + if (ret) + goto ecb_des3_192_err; + ret = crypto_register_alg(&cbc_des3_192_alg); + if (ret) + goto cbc_des3_192_err; + +out: + return ret; + +cbc_des3_192_err: + crypto_unregister_alg(&ecb_des3_192_alg); +ecb_des3_192_err: + crypto_unregister_alg(&des3_192_alg); +des3_192_err: + crypto_unregister_alg(&cbc_des_alg); +cbc_des_err: + crypto_unregister_alg(&ecb_des_alg); +ecb_des_err: + crypto_unregister_alg(&des_alg); +des_err: + goto out; +} + +static void __exit fini(void) +{ + crypto_unregister_alg(&cbc_des3_192_alg); + crypto_unregister_alg(&ecb_des3_192_alg); + crypto_unregister_alg(&des3_192_alg); + crypto_unregister_alg(&cbc_des_alg); + crypto_unregister_alg(&ecb_des_alg); + crypto_unregister_alg(&des_alg); +} + +module_init(init); +module_exit(fini); + +MODULE_ALIAS("des"); +MODULE_ALIAS("des3_ede"); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("DES & Triple DES EDE Cipher Algorithms"); diff --git a/target/linux/ubicom32/files/arch/ubicom32/crypto/md5_ubicom32.c b/target/linux/ubicom32/files/arch/ubicom32/crypto/md5_ubicom32.c new file mode 100644 index 0000000000..1f2b978ead --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/crypto/md5_ubicom32.c @@ -0,0 +1,200 @@ +/* + * arch/ubicom32/crypto/md5_ubicom32.c + * Ubicom32 implementation of the MD5 Secure Hash Algorithm + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#include <linux/init.h> +#include <linux/module.h> +#include <linux/crypto.h> + +#include "crypto_ubicom32.h" + +#define MD5_DIGEST_SIZE 16 +#define MD5_BLOCK_SIZE 64 +#define MD5_HASH_WORDS 4 + +extern void _md5_ip5k_init_digest(u32_t *digest); +extern void _md5_ip5k_transform(u32_t *data_input); +extern void _md5_ip5k_get_digest(u32_t *digest); + +struct ubicom32_md5_ctx { + u64 count; /* message length */ + u32 state[MD5_HASH_WORDS]; + u8 buf[2 * MD5_BLOCK_SIZE]; +}; + +static void md5_init(struct crypto_tfm *tfm) +{ + struct ubicom32_md5_ctx *mctx = crypto_tfm_ctx(tfm); + mctx->state[0] = 0x01234567; + mctx->state[1] = 0x89abcdef; + mctx->state[2] = 0xfedcba98; + mctx->state[3] = 0x76543210; + + mctx->count = 0; +} + +static inline void _md5_process(u32 *digest, const u8 *data) +{ + _md5_ip5k_transform((u32 *)data); +} + +static void md5_update(struct crypto_tfm *tfm, const u8 *data, + unsigned int len) +{ + struct ubicom32_md5_ctx *mctx = crypto_tfm_ctx(tfm); + int index, clen; + + /* how much is already in the buffer? */ + index = mctx->count & 0x3f; + + mctx->count += len; + + if (index + len < MD5_BLOCK_SIZE) { + goto store_only; + } + + hw_crypto_lock(); + hw_crypto_check(); + + /* init digest set ctrl register too */ + _md5_ip5k_init_digest(mctx->state); + + if (unlikely(index == 0 && SEC_ALIGNED(data))) { +fast_process: + while (len >= MD5_BLOCK_SIZE) { + _md5_process(mctx->state, data); + data += MD5_BLOCK_SIZE; + len -= MD5_BLOCK_SIZE; + } + goto store; + } + + /* process one stored block */ + if (index) { + clen = MD5_BLOCK_SIZE - index; + memcpy(mctx->buf + index, data, clen); + _md5_process(mctx->state, mctx->buf); + data += clen; + len -= clen; + index = 0; + } + + if (likely(SEC_ALIGNED(data))) { + goto fast_process; + } + + /* process as many blocks as possible */ + while (len >= MD5_BLOCK_SIZE) { + memcpy(mctx->buf, data, MD5_BLOCK_SIZE); + _md5_process(mctx->state, mctx->buf); + data += MD5_BLOCK_SIZE; + len -= MD5_BLOCK_SIZE; + } + +store: + _md5_ip5k_get_digest(mctx->state); + hw_crypto_unlock(); + +store_only: + /* anything left? */ + if (len) + memcpy(mctx->buf + index , data, len); +} + +/* Add padding and return the message digest. */ +static void md5_final(struct crypto_tfm *tfm, u8 *out) +{ + struct ubicom32_md5_ctx *mctx = crypto_tfm_ctx(tfm); + u32 bits[2]; + unsigned int index, end; + + /* must perform manual padding */ + index = mctx->count & 0x3f; + end = (index < 56) ? MD5_BLOCK_SIZE : (2 * MD5_BLOCK_SIZE); + + /* start pad with 1 */ + mctx->buf[index] = 0x80; + + /* pad with zeros */ + index++; + memset(mctx->buf + index, 0x00, end - index - 8); + + /* append message length */ + bits[0] = mctx->count << 3; + bits[1] = mctx->count >> 29; + __cpu_to_le32s(bits); + __cpu_to_le32s(bits + 1); + + memcpy(mctx->buf + end - 8, &bits, sizeof(bits)); + + /* force to use the mctx->buf and ignore the partial buf */ + mctx->count = mctx->count & ~0x3f; + md5_update(tfm, mctx->buf, end); + + /* copy digest to out */ + memcpy(out, mctx->state, MD5_DIGEST_SIZE); + + /* wipe context */ + memset(mctx, 0, sizeof *mctx); +} + +static struct crypto_alg alg = { + .cra_name = "md5", + .cra_driver_name= "md5-ubicom32", + .cra_priority = CRYPTO_UBICOM32_PRIORITY, + .cra_flags = CRYPTO_ALG_TYPE_DIGEST, + .cra_blocksize = MD5_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct ubicom32_md5_ctx), + .cra_module = THIS_MODULE, + .cra_list = LIST_HEAD_INIT(alg.cra_list), + .cra_u = { + .digest = { + .dia_digestsize = MD5_DIGEST_SIZE, + .dia_init = md5_init, + .dia_update = md5_update, + .dia_final = md5_final, + } + } +}; + +static int __init init(void) +{ + hw_crypto_init(); + return crypto_register_alg(&alg); +} + +static void __exit fini(void) +{ + crypto_unregister_alg(&alg); +} + +module_init(init); +module_exit(fini); + +MODULE_ALIAS("md5"); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("MD5 Secure Hash Algorithm"); diff --git a/target/linux/ubicom32/files/arch/ubicom32/crypto/md5_ubicom32_asm.S b/target/linux/ubicom32/files/arch/ubicom32/crypto/md5_ubicom32_asm.S new file mode 100644 index 0000000000..963a3579a6 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/crypto/md5_ubicom32_asm.S @@ -0,0 +1,234 @@ +/* + * arch/ubicom32/crypto/md5_ubicom32_asm.S + * MD5 (Message Digest 5) support for Ubicom32 v3 architecture + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ + +#define __ASM__ +#include <asm/ip5000.h> + +#ifndef RP +#define RP A5 +#endif + +;***************************************************************************************** +; The function prototypes +;***************************************************************************************** +; void md5_ip5k_init(void) +; void md5_ip5k_transform(u32_t *data_input) +; void md5_get_digest(u32_t *digest) + +;***************************************************************************************** +; Inputs +;*****************************************************************************************; +; data_input is the pointer to the block of data over which the digest will be calculated. +; It should be word aligned. +; +; digest is the pointer to the block of data into which the digest (the output) will be written. +; It should be word aligned. +; + +;***************************************************************************************** +; Outputs +;***************************************************************************************** +; None + +;***************************************************************************************** +; An: Address Registers +;***************************************************************************************** +#define an_digest A3 +#define an_data_input A3 +#define an_security_block A4 + +;***************************************************************************************** +; Hash Constants +;***************************************************************************************** +#define HASH_MD5_IN0 0x01234567 +#define HASH_MD5_IN1 0x89abcdef +#define HASH_MD5_IN2 0xfedcba98 +#define HASH_MD5_IN3 0x76543210 + +#define HASH_SECURITY_BLOCK_CONTROL_INIT_NO_ENCYPTION 2 +#define HASH_SECURITY_BLOCK_CONTROL_INIT_MD5 ((1 << 4) | HASH_SECURITY_BLOCK_CONTROL_INIT_NO_ENCYPTION) + +;***************************************************************************************** +; Hash related defines +;***************************************************************************************** +#define hash_control 0x00(an_security_block) +#define hash_control_low 0x02(an_security_block) +#define hash_status 0x04(an_security_block) + +#define hash_input_0 0x30(an_security_block) +#define hash_input_1 0x34(an_security_block) +#define hash_input_2 0x38(an_security_block) +#define hash_input_3 0x3c(an_security_block) +#define hash_input_4 0x40(an_security_block) + +#define hash_output_0 0x70(an_security_block) +#define hash_output_0_low 0x72(an_security_block) +#define hash_output_1 0x74(an_security_block) +#define hash_output_1_low 0x76(an_security_block) +#define hash_output_2 0x78(an_security_block) +#define hash_output_2_low 0x7a(an_security_block) +#define hash_output_3 0x7c(an_security_block) +#define hash_output_3_low 0x7e(an_security_block) + +;***************************************************************************************** +; Assembly macros +;***************************************************************************************** + ; C compiler reserves RP (A5) for return address during subroutine call. + ; Use RP to return to caller +.macro call_return_macro + calli RP, 0(RP) +.endm + +#if 0 +;***************************************************************************************** +; void md5_ip5k_init(void) +; initialize the output registers of the hash module +; + ;.section .text.md5_ip5k_init,"ax",@progbits + .section .text + .global _md5_ip5k_init + .func md5_ip5k_init, _md5_ip5k_init + +_md5_ip5k_init: + moveai an_security_block, #SECURITY_BASE_EFFECTIVE_ADDRESS + + movei hash_control, #%hi(HASH_SECURITY_BLOCK_CONTROL_INIT_MD5) + movei hash_control_low, #%lo(HASH_SECURITY_BLOCK_CONTROL_INIT_MD5) + + movei hash_output_0, #%hi(HASH_MD5_IN0) + movei hash_output_0_low, #%lo(HASH_MD5_IN0) + + movei hash_output_1, #%hi(HASH_MD5_IN1) + movei hash_output_1_low, #%lo(HASH_MD5_IN1) + + movei hash_output_2, #%hi(HASH_MD5_IN2) + movei hash_output_2_low, #%lo(HASH_MD5_IN2) + + movei hash_output_3, #%hi(HASH_MD5_IN3) + movei hash_output_3_low, #%lo(HASH_MD5_IN3) + + call_return_macro + .endfunc +#endif + +;***************************************************************************************** +; void md5_ip5k_init_digest(u32_t *hash_input) +; initialize the output registers of the hash module + + ;.section .text.md5_ip5k_init_digest,"ax",@progbits + .section .text + .global _md5_ip5k_init_digest + .func md5_ip5k_init_digest, _md5_ip5k_init_digest + +_md5_ip5k_init_digest: + movea an_data_input, D0 + + moveai an_security_block, #SECURITY_BASE_EFFECTIVE_ADDRESS + + movei hash_control, #%hi(HASH_SECURITY_BLOCK_CONTROL_INIT_MD5) + movei hash_control_low, #%lo(HASH_SECURITY_BLOCK_CONTROL_INIT_MD5) + + move.4 hash_output_0, (an_data_input)4++ + move.4 hash_output_1, (an_data_input)4++ + move.4 hash_output_2, (an_data_input)4++ + move.4 hash_output_3, (an_data_input)4++ + + call_return_macro + .endfunc + +;***************************************************************************************** +; void md5_ip5k_transform(u32_t *data_input) +; performs intermediate transformation step for the hash calculation +; + ;.sect .text.md5_ip5k_transform,"ax",@progbits + .section .text + .global _md5_ip5k_transform + .func md5_ip5k_transform, _md5_ip5k_transform + +_md5_ip5k_transform: + movea an_data_input, D0 + + moveai an_security_block, #SECURITY_BASE_EFFECTIVE_ADDRESS + + ; Write the first 128bits (16 bytes) + move.4 hash_input_0, (an_data_input)4++ + move.4 hash_input_1, (an_data_input)4++ + move.4 hash_input_2, (an_data_input)4++ + move.4 hash_input_3, (an_data_input)4++ + move.4 hash_input_4, D0 + + move.4 hash_input_0, (an_data_input)4++ + move.4 hash_input_1, (an_data_input)4++ + move.4 hash_input_2, (an_data_input)4++ + move.4 hash_input_3, (an_data_input)4++ + move.4 hash_input_4, D0 + + move.4 hash_input_0, (an_data_input)4++ + move.4 hash_input_1, (an_data_input)4++ + move.4 hash_input_2, (an_data_input)4++ + move.4 hash_input_3, (an_data_input)4++ + move.4 hash_input_4, D0 + + move.4 hash_input_0, (an_data_input)4++ + move.4 hash_input_1, (an_data_input)4++ + move.4 hash_input_2, (an_data_input)4++ + move.4 hash_input_3, (an_data_input)4++ + move.4 hash_input_4, D0 + + pipe_flush 0 + +md5_ip5k_transform_wait: + ; wait for the module to calculate the output hash + btst hash_status, #0 + jmpne.f md5_ip5k_transform_wait + + call_return_macro + .endfunc + +;***************************************************************************************** +; void md5_ip5k_get_digest(u32_t *digest) +; Return the hash of the input data +; + ;.sect .text.md5_get_digest,"ax",@progbits + .section .text + .global _md5_ip5k_get_digest + .func md5_ip5k_get_digest, _md5_ip5k_get_digest + +_md5_ip5k_get_digest: + movea an_digest, D0 + + moveai an_security_block, #SECURITY_BASE_EFFECTIVE_ADDRESS + + ; we have finished + move.4 0(an_digest), hash_output_0 + move.4 4(an_digest), hash_output_1 + move.4 8(an_digest), hash_output_2 + move.4 12(an_digest), hash_output_3 + + call_return_macro + .endfunc diff --git a/target/linux/ubicom32/files/arch/ubicom32/crypto/sha1_ubicom32.c b/target/linux/ubicom32/files/arch/ubicom32/crypto/sha1_ubicom32.c new file mode 100644 index 0000000000..2d0c870ebf --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/crypto/sha1_ubicom32.c @@ -0,0 +1,354 @@ +/* + * arch/ubicom32/crypto/sha1_ubicom32.c + * Ubicom32 implementation of the SHA1 Secure Hash Algorithm. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#include <linux/init.h> +#include <linux/module.h> +#include <linux/crypto.h> +#include <crypto/sha.h> +#include <asm/linkage.h> + +#include "crypto_ubicom32.h" +#define HASH_SECURITY_BLOCK_CONTROL_INIT_NO_ENCYPTION 2 +#define HASH_SECURITY_BLOCK_CONTROL_INIT_SHA1 ((1 << 5) | HASH_SECURITY_BLOCK_CONTROL_INIT_NO_ENCYPTION) + +struct ubicom32_sha1_ctx { + u64 count; /* message length */ + u32 state[5]; + u8 buf[2 * SHA1_BLOCK_SIZE]; +}; + +static inline void sha1_clear_2ws(u8 *buf, int wc) +{ + asm volatile ( + "1: move.4 (%0)4++, #0 \n\t" + " move.4 (%0)4++, #0 \n\t" + " sub.4 %1, #2, %1 \n\t" + " jmple.f 1b \n\t" + : + : "a" (buf), "d" (wc) + : "cc" + ); +} + +/* only wipe out count, state, and 1st half of buf - 9 bytes at most */ +#define sha1_wipe_out(sctx) sha1_clear_2ws((u8 *)sctx, 2 + 5 + 16 - 2) + +static inline void sha1_init_digest(u32 *digest) +{ + hw_crypto_set_ctrl(HASH_SECURITY_BLOCK_CONTROL_INIT_SHA1); + asm volatile ( + " ; move digests to hash_output regs \n\t" + " move.4 0x70(%0), 0x0(%1) \n\t" + " move.4 0x74(%0), 0x4(%1) \n\t" + " move.4 0x78(%0), 0x8(%1) \n\t" + " move.4 0x7c(%0), 0xc(%1) \n\t" + " move.4 0x80(%0), 0x10(%1) \n\t" + : + : "a" (SEC_BASE), "a" (digest) + ); +} + +static inline void sha1_transform_feed(const u8 *in) +{ + asm volatile ( + " ; write the 1st 16 bytes \n\t" + " move.4 0x30(%0), 0x0(%1) \n\t" + " move.4 0x34(%0), 0x4(%1) \n\t" + " move.4 0x38(%0), 0x8(%1) \n\t" + " move.4 0x3c(%0), 0xc(%1) \n\t" + " move.4 0x40(%0), %1 \n\t" + " ; write the 2nd 16 bytes \n\t" + " move.4 0x30(%0), 0x10(%1) \n\t" + " move.4 0x34(%0), 0x14(%1) \n\t" + " move.4 0x38(%0), 0x18(%1) \n\t" + " move.4 0x3c(%0), 0x1c(%1) \n\t" + " move.4 0x40(%0), %1 \n\t" + " ; write the 3rd 16 bytes \n\t" + " move.4 0x30(%0), 0x20(%1) \n\t" + " move.4 0x34(%0), 0x24(%1) \n\t" + " move.4 0x38(%0), 0x28(%1) \n\t" + " move.4 0x3c(%0), 0x2c(%1) \n\t" + " move.4 0x40(%0), %1 \n\t" + " ; write the 4th 16 bytes \n\t" + " move.4 0x30(%0), 0x30(%1) \n\t" + " move.4 0x34(%0), 0x34(%1) \n\t" + " move.4 0x38(%0), 0x38(%1) \n\t" + " move.4 0x3c(%0), 0x3c(%1) \n\t" + " move.4 0x40(%0), %1 \n\t" + " pipe_flush 0 \n\t" + : + : "a"(SEC_BASE), "a"(in) + ); +} + +static inline void sha1_transform_wait(void) +{ + asm volatile ( + " btst 0x04(%0), #0 \n\t" + " jmpne.f -4 \n\t" + : + : "a"(SEC_BASE) + : "cc" + ); +} + +static inline void sha1_output_digest(u32 *digest) +{ + asm volatile ( + " move.4 0x0(%1), 0x70(%0) \n\t" + " move.4 0x4(%1), 0x74(%0) \n\t" + " move.4 0x8(%1), 0x78(%0) \n\t" + " move.4 0xc(%1), 0x7c(%0) \n\t" + " move.4 0x10(%1), 0x80(%0) \n\t" + : + : "a" (SEC_BASE), "a" (digest) + ); +} + +static __ocm_text void sha1_init(struct crypto_tfm *tfm) +{ + struct ubicom32_sha1_ctx *sctx = crypto_tfm_ctx(tfm); + + sctx->state[0] = SHA1_H0; + sctx->state[1] = SHA1_H1; + sctx->state[2] = SHA1_H2; + sctx->state[3] = SHA1_H3; + sctx->state[4] = SHA1_H4; + sctx->count = 0; +} + +static void __ocm_text sha1_update(struct crypto_tfm *tfm, const u8 *data, + unsigned int len) +{ + struct ubicom32_sha1_ctx *sctx = crypto_tfm_ctx(tfm); + int index, clen; + + /* how much is already in the buffer? */ + index = sctx->count & 0x3f; + + sctx->count += len; + + if (index + len < SHA1_BLOCK_SIZE) { + goto store_only; + } + + hw_crypto_lock(); + hw_crypto_check(); + + /* init digest set ctrl register too */ + sha1_init_digest(sctx->state); + + if (unlikely(index == 0 && SEC_ALIGNED(data))) { +fast_process: +#if CRYPTO_UBICOM32_LOOP_ASM + if (likely(len >= SHA1_BLOCK_SIZE)) { + register unsigned int cnt = len >> 6; // loop = len / 64; + sha1_transform_feed(data); + data += SHA1_BLOCK_SIZE; + + /* cnt is pre-decremented in the loop */ + asm volatile ( + "; while (--loop): work on 2nd block \n\t" + "1: add.4 %2, #-1, %2 \n\t" + " jmpeq.f 5f \n\t" + " \n\t" + " ; write the 1st 16 bytes \n\t" + " move.4 0x30(%1), (%0)4++ \n\t" + " move.4 0x34(%1), (%0)4++ \n\t" + " move.4 0x38(%1), (%0)4++ \n\t" + " move.4 0x3c(%1), (%0)4++ \n\t" + " ; can not kick off hw before it \n\t" + " ; is done with the prev block \n\t" + " \n\t" + " btst 0x04(%1), #0 \n\t" + " jmpne.f -4 \n\t" + " \n\t" + " ; tell hw to load 1st 16 bytes \n\t" + " move.4 0x40(%1), %2 \n\t" + " \n\t" + " ; write the 2nd 16 bytes \n\t" + " move.4 0x30(%1), (%0)4++ \n\t" + " move.4 0x34(%1), (%0)4++ \n\t" + " move.4 0x38(%1), (%0)4++ \n\t" + " move.4 0x3c(%1), (%0)4++ \n\t" + " move.4 0x40(%1), %2 \n\t" + " \n\t" + " ; write the 3rd 16 bytes \n\t" + " move.4 0x30(%1), (%0)4++ \n\t" + " move.4 0x34(%1), (%0)4++ \n\t" + " move.4 0x38(%1), (%0)4++ \n\t" + " move.4 0x3c(%1), (%0)4++ \n\t" + " move.4 0x40(%1), %2 \n\t" + " \n\t" + " ; write the 4th 16 bytes \n\t" + " move.4 0x30(%1), (%0)4++ \n\t" + " move.4 0x34(%1), (%0)4++ \n\t" + " move.4 0x38(%1), (%0)4++ \n\t" + " move.4 0x3c(%1), (%0)4++ \n\t" + " move.4 0x40(%1), %2 \n\t" + " \n\t" + "; no need flush, enough insts \n\t" + "; before next hw wait \n\t" + " \n\t" + "; go back to loop \n\t" + " jmpt 1b \n\t" + " \n\t" + "; wait hw for last block \n\t" + "5: btst 0x04(%1), #0 \n\t" + " jmpne.f -4 \n\t" + " \n\t" + : "+a" (data) + : "a"( SEC_BASE), "d" (cnt) + : "cc" + ); + + len = len & (64 - 1); + } +#else + while (likely(len >= SHA1_BLOCK_SIZE)) { + sha1_transform_feed(data); + data += SHA1_BLOCK_SIZE; + len -= SHA1_BLOCK_SIZE; + sha1_transform_wait(); + } +#endif + goto store; + } + + /* process one stored block */ + if (index) { + clen = SHA1_BLOCK_SIZE - index; + memcpy(sctx->buf + index, data, clen); + sha1_transform_feed(sctx->buf); + data += clen; + len -= clen; + index = 0; + sha1_transform_wait(); + } + + if (likely(SEC_ALIGNED(data))) { + goto fast_process; + } + + /* process as many blocks as possible */ + if (likely(len >= SHA1_BLOCK_SIZE)) { + memcpy(sctx->buf, data, SHA1_BLOCK_SIZE); + do { + sha1_transform_feed(sctx->buf); + data += SHA1_BLOCK_SIZE; + len -= SHA1_BLOCK_SIZE; + if (likely(len >= SHA1_BLOCK_SIZE)) { + memcpy(sctx->buf, data, SHA1_BLOCK_SIZE); + sha1_transform_wait(); + continue; + } + /* it is the last block */ + sha1_transform_wait(); + break; + } while (1); + } + +store: + sha1_output_digest(sctx->state); + hw_crypto_unlock(); + +store_only: + /* anything left? */ + if (len) + memcpy(sctx->buf + index , data, len); +} + +/* Add padding and return the message digest. */ +static void __ocm_text sha1_final(struct crypto_tfm *tfm, u8 *out) +{ + struct ubicom32_sha1_ctx *sctx = crypto_tfm_ctx(tfm); + u64 bits; + unsigned int index, end; + + /* must perform manual padding */ + index = sctx->count & 0x3f; + end = (index < 56) ? SHA1_BLOCK_SIZE : (2 * SHA1_BLOCK_SIZE); + + /* start pad with 1 */ + sctx->buf[index] = 0x80; + + /* pad with zeros */ + index++; + memset(sctx->buf + index, 0x00, end - index - 8); + + /* append message length */ + bits = sctx->count << 3 ; + SEC_COPY_2W(sctx->buf + end - 8, &bits); + + /* force to use the sctx->buf and ignore the partial buf */ + sctx->count = sctx->count & ~0x3f; + sha1_update(tfm, sctx->buf, end); + + /* copy digest to out */ + SEC_COPY_5W(out, sctx->state); + + /* wipe context */ + sha1_wipe_out(sctx); +} + +static struct crypto_alg alg = { + .cra_name = "sha1", + .cra_driver_name= "sha1-ubicom32", + .cra_priority = CRYPTO_UBICOM32_PRIORITY, + .cra_flags = CRYPTO_ALG_TYPE_DIGEST, + .cra_blocksize = SHA1_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct ubicom32_sha1_ctx), + .cra_module = THIS_MODULE, + .cra_list = LIST_HEAD_INIT(alg.cra_list), + .cra_u = { + .digest = { + .dia_digestsize = SHA1_DIGEST_SIZE, + .dia_init = sha1_init, + .dia_update = sha1_update, + .dia_final = sha1_final, + } + } +}; + +static int __init init(void) +{ + hw_crypto_init(); + return crypto_register_alg(&alg); +} + +static void __exit fini(void) +{ + crypto_unregister_alg(&alg); +} + +module_init(init); +module_exit(fini); + +MODULE_ALIAS("sha1"); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("SHA1 Secure Hash Algorithm"); diff --git a/target/linux/ubicom32/files/arch/ubicom32/crypto/sha1_ubicom32_asm.S b/target/linux/ubicom32/files/arch/ubicom32/crypto/sha1_ubicom32_asm.S new file mode 100644 index 0000000000..f610b7e9f1 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/crypto/sha1_ubicom32_asm.S @@ -0,0 +1,244 @@ +/* + * arch/ubicom32/crypto/sha1_ubicom32_asm.S + * SHA1 hash support for Ubicom32 architecture V3. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ + +#define __ASM__ +#include <asm/ip5000.h> + +#ifndef RP +#define RP A5 +#endif + +;***************************************************************************************** +; The function prototype +;***************************************************************************************** +; void sha1_ip5k_init(void) +; void sha1_ip5k_transform(u32_t *data_input) +; void sha1_ip5k_output(u32_t *digest) + +;***************************************************************************************** +; Inputs +;***************************************************************************************** +; data_input is the pointer to the block of data over which the digest will be calculated. +; It should be word aligned. +; +; digest is the pointer to the block of data into which the digest (the output) will be written. +; It should be word aligned. +; + +;***************************************************************************************** +; Outputs +;***************************************************************************************** +; None + +;***************************************************************************************** +; Hash Constants +;***************************************************************************************** +#define HASH_SHA1_IN0 0x67452301 +#define HASH_SHA1_IN1 0xefcdab89 +#define HASH_SHA1_IN2 0x98badcfe +#define HASH_SHA1_IN3 0x10325476 +#define HASH_SHA1_IN4 0xc3d2e1f0 + +#define HASH_SECURITY_BLOCK_CONTROL_INIT_NO_ENCYPTION 2 +#define HASH_SECURITY_BLOCK_CONTROL_INIT_SHA1 ((1 << 5) | HASH_SECURITY_BLOCK_CONTROL_INIT_NO_ENCYPTION) + +;***************************************************************************************** +; An: Address Registers +;***************************************************************************************** +#define an_digest a4 +#define an_data_input a4 +#define an_security_block a3 + +;***************************************************************************************** +; Hash related defines +;***************************************************************************************** +#define hash_control 0x00(an_security_block) +#define hash_control_low 0x02(an_security_block) +#define hash_status 0x04(an_security_block) + +#define hash_input_0 0x30(an_security_block) +#define hash_input_1 0x34(an_security_block) +#define hash_input_2 0x38(an_security_block) +#define hash_input_3 0x3c(an_security_block) +#define hash_input_4 0x40(an_security_block) + +#define hash_output_0 0x70(an_security_block) +#define hash_output_0_low 0x72(an_security_block) +#define hash_output_1 0x74(an_security_block) +#define hash_output_1_low 0x76(an_security_block) +#define hash_output_2 0x78(an_security_block) +#define hash_output_2_low 0x7a(an_security_block) +#define hash_output_3 0x7c(an_security_block) +#define hash_output_3_low 0x7e(an_security_block) +#define hash_output_4 0x80(an_security_block) +#define hash_output_4_low 0x82(an_security_block) + +;***************************************************************************************** +; Assembly macros +;***************************************************************************************** + ; C compiler reserves RP (A5) for return address during subroutine call. + ; Use RP to return to caller +.macro call_return_macro + calli RP, 0(RP) +.endm + +;***************************************************************************************** +; void sha1_ip5k_init(void) +; initialize the output registers of the hash module + + ;.section .text.sha1_ip5k_init,"ax",@progbits + .section .ocm_text,"ax",@progbits + .global _sha1_ip5k_init + .func sha1_ip5k_init, _sha1_ip5k_init + +_sha1_ip5k_init: + moveai an_security_block, #SECURITY_BASE_EFFECTIVE_ADDRESS + + movei hash_control, #%hi(HASH_SECURITY_BLOCK_CONTROL_INIT_SHA1) + movei hash_control_low, #%lo(HASH_SECURITY_BLOCK_CONTROL_INIT_SHA1) + + movei hash_output_0, #%hi(HASH_SHA1_IN0) + movei hash_output_0_low, #%lo(HASH_SHA1_IN0) + + movei hash_output_1, #%hi(HASH_SHA1_IN1) + movei hash_output_1_low, #%lo(HASH_SHA1_IN1) + + movei hash_output_2, #%hi(HASH_SHA1_IN2) + movei hash_output_2_low, #%lo(HASH_SHA1_IN2) + + movei hash_output_3, #%hi(HASH_SHA1_IN3) + movei hash_output_3_low, #%lo(HASH_SHA1_IN3) + + movei hash_output_4, #%hi(HASH_SHA1_IN4) + movei hash_output_4_low, #%lo(HASH_SHA1_IN4) + + call_return_macro + .endfunc + +;***************************************************************************************** +; void sha1_ip5k_init_digest(u32_t *hash_input) +; initialize the output registers of the hash module + + ;.section .text.sha1_ip5k_init_digest,"ax",@progbits + .section .ocm_text,"ax",@progbits + .global _sha1_ip5k_init_digest + .func sha1_ip5k_init_digest, _sha1_ip5k_init_digest + +_sha1_ip5k_init_digest: + movea an_data_input, D0 + + moveai an_security_block, #SECURITY_BASE_EFFECTIVE_ADDRESS + + movei hash_control, #%hi(HASH_SECURITY_BLOCK_CONTROL_INIT_SHA1) + movei hash_control_low, #%lo(HASH_SECURITY_BLOCK_CONTROL_INIT_SHA1) + + move.4 hash_output_0, (an_data_input)4++ + move.4 hash_output_1, (an_data_input)4++ + move.4 hash_output_2, (an_data_input)4++ + move.4 hash_output_3, (an_data_input)4++ + move.4 hash_output_4, (an_data_input)4++ + + call_return_macro + .endfunc + +;***************************************************************************************** +; void sha1_ip5k_transform(u32_t *data_input) +; performs intermediate transformation step for the hash calculation + + ;.section .text.sha1_ip5k_transform,"ax",@progbits + .section .ocm_text,"ax",@progbits + .global _sha1_ip5k_transform + .func sha1_ip5k_transform, _sha1_ip5k_transform + +_sha1_ip5k_transform: + movea an_data_input, D0 + + moveai an_security_block, #SECURITY_BASE_EFFECTIVE_ADDRESS + + ; Write the first 128bits (16 bytes) + move.4 hash_input_0, (an_data_input)4++ + move.4 hash_input_1, (an_data_input)4++ + move.4 hash_input_2, (an_data_input)4++ + move.4 hash_input_3, (an_data_input)4++ + move.4 hash_input_4, D0 + + move.4 hash_input_0, (an_data_input)4++ + move.4 hash_input_1, (an_data_input)4++ + move.4 hash_input_2, (an_data_input)4++ + move.4 hash_input_3, (an_data_input)4++ + move.4 hash_input_4, D0 + + move.4 hash_input_0, (an_data_input)4++ + move.4 hash_input_1, (an_data_input)4++ + move.4 hash_input_2, (an_data_input)4++ + move.4 hash_input_3, (an_data_input)4++ + move.4 hash_input_4, D0 + + move.4 hash_input_0, (an_data_input)4++ + move.4 hash_input_1, (an_data_input)4++ + move.4 hash_input_2, (an_data_input)4++ + move.4 hash_input_3, (an_data_input)4++ + move.4 hash_input_4, D0 + + pipe_flush 0 + +sha1_ip5k_transform_wait: + ; wait for the module to calculate the output hash + btst hash_status, #0 + jmpne.f sha1_ip5k_transform_wait + + call_return_macro + .endfunc + +;***************************************************************************************** +; void sha1_ip5k_output(u32_t *digest) +; Return the hash of the input data + + ;.section .text.sha1_ip5k_output,"ax",@progbits + .section .ocm_text,"ax",@progbits + .global _sha1_ip5k_output + .func sha1_ip5k_output, _sha1_ip5k_output + +_sha1_ip5k_output: + movea an_digest, D0 + + moveai an_security_block, #SECURITY_BASE_EFFECTIVE_ADDRESS + + ; we have finished + move.4 0(an_digest), hash_output_0 + move.4 4(an_digest), hash_output_1 + move.4 8(an_digest), hash_output_2 + move.4 12(an_digest), hash_output_3 + move.4 16(an_digest), hash_output_4 + + call_return_macro + .endfunc + +;***************************************************************************************** +;END ;End of program code +;***************************************************************************************** diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/.gitignore b/target/linux/ubicom32/files/arch/ubicom32/include/asm/.gitignore new file mode 100644 index 0000000000..c6b1010dbb --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/.gitignore @@ -0,0 +1 @@ +/ocm_size.h diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/Kbuild b/target/linux/ubicom32/files/arch/ubicom32/include/asm/Kbuild new file mode 100644 index 0000000000..c68e1680da --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/Kbuild @@ -0,0 +1 @@ +include include/asm-generic/Kbuild.asm diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/a.out.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/a.out.h new file mode 100644 index 0000000000..8eb0ade881 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/a.out.h @@ -0,0 +1,47 @@ +/* + * arch/ubicom32/include/asm/a.out.h + * Definitions for Ubicom32 a.out executable format. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_A_OUT_H +#define _ASM_UBICOM32_A_OUT_H + +struct exec +{ + unsigned long a_info; /* Use macros N_MAGIC, etc for access */ + unsigned a_text; /* length of text, in bytes */ + unsigned a_data; /* length of data, in bytes */ + unsigned a_bss; /* length of uninitialized data area for file, in bytes */ + unsigned a_syms; /* length of symbol table data in file, in bytes */ + unsigned a_entry; /* start address */ + unsigned a_trsize; /* length of relocation info for text, in bytes */ + unsigned a_drsize; /* length of relocation info for data, in bytes */ +}; + +#define N_TRSIZE(a) ((a).a_trsize) +#define N_DRSIZE(a) ((a).a_drsize) +#define N_SYMSIZE(a) ((a).a_syms) + +#endif /* _ASM_UBICOM32_A_OUT_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/atomic.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/atomic.h new file mode 100644 index 0000000000..78d9fcd8f2 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/atomic.h @@ -0,0 +1,348 @@ +/* + * arch/ubicom32/include/asm/atomic.h + * Atomic operations definitions for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_ATOMIC_H +#define _ASM_UBICOM32_ATOMIC_H + +#include <asm/system.h> +#include <asm/ubicom32-common.h> +#include <asm/types.h> + +/* + * Most instructions on the Ubicom32 processor are atomic in that they + * execute in one clock cycle. However, Linux has several operations + * (e.g. compare and swap) which will require more than a single instruction + * to perform. To achieve this, the Ubicom32 processor uses a single + * global bit in a scratchpad register as a critical section lock. All + * atomic operations acquire this lock. + * + * NOTE: To AVOID DEADLOCK(s), the atomic lock must only be used for atomic + * operations or by the ldsr to avoid disabling a thread performing an atomic + * operation. + * + * Do not attempt to disable interrupts while holding the atomic operations + * lock or you will DEADLOCK the system. + */ + +#define ATOMIC_INIT(i) { (i) } + +/* + * __atomic_add() + * Add i to v and return the result. + */ +static inline void __atomic_add(int i, atomic_t *v) +{ + atomic_t *vt = v; + + __atomic_lock_acquire(); + vt->counter += i; + __atomic_lock_release(); +} + +/* + * __atomic_sub() + * Subtract i from v and return the result. + */ +static inline void __atomic_sub(int i, atomic_t *v) +{ + atomic_t *vt = v; + + __atomic_lock_acquire(); + vt->counter -= i; + __atomic_lock_release(); +} + +/* + * __atomic_add_return() + * Add i to v and return the result. + * + * The implementation here looks rather odd because we appear to be doing + * the addition twice. In fact that's exactly what we're doing but with + * the ubicom32 instruction set we can do the inner load and add with two + * instructions whereas generating both the atomic result and the "ret" + * result requires three instructions. The second add is generally only as + * costly as a move instruction and in cases where we compare the result + * with a constant the compiler can fold two constant values and do a + * single instruction, thus saving an instruction overall! + * + * At the worst we save one instruction inside the atomic lock. + */ +static inline int __atomic_add_return(int i, atomic_t *v) +{ + int ret; + atomic_t *vt = v; + + __atomic_lock_acquire(); + ret = vt->counter; + vt->counter = ret + i; + __atomic_lock_release(); + + return ret + i; +} + +/* + * __atomic_sub_return() + * Subtract i from v and return the result. + * + * The implementation here looks rather odd because we appear to be doing + * the subtraction twice. In fact that's exactly what we're doing but with + * the ubicom32 instruction set we can do the inner load and sub with two + * instructions whereas generating both the atomic result and the "ret" + * result requires three instructions. The second sub is generally only as + * costly as a move instruction and in cases where we compare the result + * with a constant the compiler can fold two constant values and do a + * single instruction, thus saving an instruction overall! + * + * At the worst we save one instruction inside the atomic lock. + */ +static inline int __atomic_sub_return(int i, atomic_t *v) +{ + int ret; + atomic_t *vt = v; + + __atomic_lock_acquire(); + ret = vt->counter; + vt->counter = ret - i; + __atomic_lock_release(); + + return ret - i; +} + +/* + * PUBLIC API FOR ATOMIC! + */ +#define atomic_add(i,v) (__atomic_add( ((int)i),(v))) +#define atomic_sub(i,v) (__atomic_sub( ((int)i),(v))) +#define atomic_inc(v) (__atomic_add( 1,(v))) +#define atomic_dec(v) (__atomic_sub( 1,(v))) +#define atomic_add_return(i,v) (__atomic_add_return( ((int)i),(v))) +#define atomic_sub_return(i,v) (__atomic_sub_return( ((int)i),(v))) +#define atomic_inc_return(v) (__atomic_add_return( 1,(v))) +#define atomic_dec_return(v) (__atomic_sub_return( 1,(v))) +#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0) +#define atomic_dec_and_test(v) (atomic_dec_return(v) == 0) +#define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0) +#define atomic_sub_and_test(i,v) (atomic_sub_return((i),(v)) == 0) + +/* + * atomic_read() + * Acquire the atomic lock and read the variable. + */ +static inline int atomic_read(const atomic_t *v) +{ + int ret; + const atomic_t *vt = v; + + __atomic_lock_acquire(); + ret = vt->counter; + __atomic_lock_release(); + + return ret; +} + +/* + * atomic_set() + * Acquire the atomic lock and set the variable. + */ +static inline void atomic_set(atomic_t *v, int i) +{ + atomic_t *vt = v; + + __atomic_lock_acquire(); + vt->counter = i; + __atomic_lock_release(); +} + +/* + * atomic_cmpxchg + * Acquire the atomic lock and exchange if current == old. + */ +static inline int atomic_cmpxchg(atomic_t *v, int old, int new) +{ + int prev; + atomic_t *vt = v; + + __atomic_lock_acquire(); + prev = vt->counter; + if (prev == old) { + vt->counter = new; + } + __atomic_lock_release(); + + return prev; +} + +/* + * atomic_xchg() + * Acquire the atomic lock and exchange values. + */ +static inline int atomic_xchg(atomic_t *v, int new) +{ + int prev; + atomic_t *vt = v; + + __atomic_lock_acquire(); + prev = vt->counter; + vt->counter = new; + __atomic_lock_release(); + + return prev; +} + +/* + * atomic_add_unless() + * Acquire the atomic lock and add a unless the value is u. + */ +static inline int atomic_add_unless(atomic_t *v, int a, int u) +{ + int prev; + atomic_t *vt = v; + + __atomic_lock_acquire(); + prev = vt->counter; + if (prev != u) { + vt->counter += a; + __atomic_lock_release(); + return 1; + } + + __atomic_lock_release(); + return 0; +} + +#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) + +#include <asm-generic/atomic.h> + +/* + * The following is not a real function. The compiler should remove the function + * call as long as the user does not pass in a size that __xchg and __cmpxchg + * are not prepared for. If the user does pass in an unknown size, the user + * will get a link time error. + * + * The no return is to prevent a compiler error that can occur when dealing with + * uninitialized variables. Given that the function doesn't exist there is no + * net effect (and if it did it would not return). + */ +extern void __xchg_called_with_bad_pointer(void) __attribute__((noreturn)); + +/* + * __xchg() + * Xchange *ptr for x atomically. + * + * Must be both locally atomic and atomic on SMP. Ubicom32 does not have an + * atomic exchange instruction so we use the global atomic_lock. + */ +static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size) +{ + unsigned long ret; + + __atomic_lock_acquire(); + + switch (size) { + case 1: + ret = *(volatile unsigned char *)ptr; + *(volatile unsigned char *)ptr = x; + break; + + case 2: + ret = *(volatile unsigned short *)ptr; + *(volatile unsigned short *)ptr = x; + break; + + case 4: + ret = *(volatile unsigned int *)ptr; + *(volatile unsigned int *)ptr = x; + break; + + default: + __xchg_called_with_bad_pointer(); + break; + } + __atomic_lock_release(); + return ret; +} + +#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) + +/* + * __cmpxchg() + * Compare and Xchange *ptr for x atomically. + * + * Must be both locally atomic and atomic on SMP. Ubicom32 does not have an + * atomic exchange instruction so we use the global atomic_lock. + */ +static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old, unsigned long next, int size) +{ + unsigned long prev; + + __atomic_lock_acquire(); + switch (size) { + case 1: + prev = *(u8 *)ptr; + if (prev == old) { + *(u8 *)ptr = (u8)next; + } + break; + + case 2: + prev = *(u16 *)ptr; + if (prev == old) { + *(u16 *)ptr = (u16)next; + } + break; + + case 4: + prev = *(u32 *)ptr; + if (prev == old) { + *(u32 *)ptr = (u32)next; + } + break; + + default: + __xchg_called_with_bad_pointer(); + break; + } + __atomic_lock_release(); + return prev; +} + +/* + * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make + * them available. + */ +#define cmpxchg_local(ptr, o, n) \ + ((__typeof__(*(ptr)))__cmpxchg((ptr), (unsigned long)(o), (unsigned long)(n), sizeof(*(ptr)))) + +#define cmpxchg(ptr, o, n) __cmpxchg((ptr), (o), (n), sizeof(*(ptr))) + +#define smp_mb__before_atomic_inc() asm volatile ("" : : : "memory") +#define smp_mb__after_atomic_inc() asm volatile ("" : : : "memory") +#define smp_mb__before_atomic_dec() asm volatile ("" : : : "memory") +#define smp_mb__after_atomic_dec() asm volatile ("" : : : "memory") + +#endif /* _ASM_UBICOM32_ATOMIC_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/audio.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/audio.h new file mode 100644 index 0000000000..974d0cd63d --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/audio.h @@ -0,0 +1,40 @@ +/* + * arch/ubicom32/include/asm/audio.h + * Audio include file + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + */ + +#ifndef _AUDIO_H +#define _AUDIO_H + +#include <asm/devtree.h> +#include <asm/audionode.h> + +/* + * Resource indices used to access IRQs via platform_get_resource + */ +#define AUDIO_MEM_RESOURCE 0 +#define AUDIO_TX_IRQ_RESOURCE 0 +#define AUDIO_RX_IRQ_RESOURCE 1 + +extern struct platform_device * __init audio_device_alloc(const char *driver_name, const char *node_name, const char *inst_name, int priv_size); + +#define audio_device_priv(pdev) (((struct ubi32pcm_platform_data *)(((struct platform_device *)(pdev))->dev.platform_data))->priv_data) +#endif diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/audionode.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/audionode.h new file mode 100644 index 0000000000..f18a0e817d --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/audionode.h @@ -0,0 +1,152 @@ +/* + * audionode.h + * audionode and DMA descriptors + * + * Copyright © 2009 Ubicom Inc. <www.ubicom.com>. All rights reserved. + * + * This file contains confidential information of Ubicom, Inc. and your use of + * this file is subject to the Ubicom Software License Agreement distributed with + * this file. If you are uncertain whether you are an authorized user or to report + * any unauthorized use, please contact Ubicom, Inc. at +1-408-789-2200. + * Unauthorized reproduction or distribution of this file is subject to civil and + * criminal penalties. + * + */ +#ifndef _AUDIONODE_H_ +#define _AUDIONODE_H_ + +#define AUDIO_INT_FLAG_MORE_SAMPLES 0x00000001 +#define AUDIO_INT_FLAG_COMMAND 0x00000002 + +/* + * Commands the Primary OS sends to the audio device + */ +enum audio_command { + AUDIO_CMD_NONE, + AUDIO_CMD_START, + AUDIO_CMD_STOP, + AUDIO_CMD_PAUSE, + AUDIO_CMD_RESUME, + AUDIO_CMD_MUTE, + AUDIO_CMD_UNMUTE, + AUDIO_CMD_SETUP, + AUDIO_CMD_ENABLE, + AUDIO_CMD_DISABLE, +}; + +/* + * Flag bits passed in the registers + */ +#define CMD_START_FLAG_LE (1 << 0) /* Use Little Endian Mode */ + +/* + * Status bits that audio device can set to indicate reason + * for interrupting the Primary OS + */ +#define AUDIO_STATUS_PLAY_DMA0_REQUEST (1 << 0) /* Audio device needs samples in DMA0 for playback */ +#define AUDIO_STATUS_PLAY_DMA1_REQUEST (1 << 1) /* Audio device needs samples in DMA1 for playback */ + +struct audio_dma { + /* + * NOTE: The active flag shall only be SET by the producer and CLEARED + * by the consumer, NEVER the other way around. For playback, the + * Primary OS sets this flag and ipAudio clears it. + * + * The producer shall not modify the ptr or ctr fields when the transfer + * is marked as active, as these are used by the consumer to do the + * transfer. + */ + volatile u32_t active; /* Nonzero if data in ptr/ctr ready to be transferred */ + volatile void *ptr; /* Pointer to data to be transferred */ + volatile u32_t ctr; /* Counter: number of data units to transfer */ +}; + +#define AUDIONODE_CAP_BE (1 << 0) +#define AUDIONODE_CAP_LE (1 << 1) + +#define AUDIONODE_VERSION 7 +struct audio_node { + struct devtree_node dn; + + /* + * Version of this node + */ + u32_t version; + + /* + * Pointer to the registers + */ + struct audio_regs *regs; +}; + +/* + * [OCM] Audio registers + * Registers exposed as part of our MMIO area + */ +#define AUDIO_REGS_VERSION 7 +struct audio_regs { + /* + * Version of this register set + */ + u32_t version; + + /* + * Interrupt status + */ + volatile u32_t int_status; + + /* + * Interrupt request + */ + volatile u32_t int_req; + + /* + * Current IRQ being serviced + */ + u32_t cur_irq; + + /* + * Maximum number of devices supported + */ + u32_t max_devs; + + /* + * [DDR] Device registers for each of the devices + */ + struct audio_dev_regs *adr; +}; + +#define AUDIO_DEV_REGS_VERSION 2 +struct audio_dev_regs { + u32_t version; /* Version of this register set */ + + u8_t name[32]; /* Name of this driver */ + u32_t caps; /* Capabilities of this driver */ + const u32_t *sample_rates; /* Sample Rates supported by this driver */ + u32_t n_sample_rates; /* Number of sample rates supported by this driver */ + u32_t channel_mask; /* A bit set in a particular position means we support this channel configuration */ + volatile u32_t int_flags; /* Reason for interrupting audio device */ + volatile enum audio_command command; /* Command from Primary OS */ + volatile u32_t flags; /* Flag bits for this command */ + volatile u32_t channels; /* Number of channels */ + volatile u32_t sample_rate; /* Sample rate */ + volatile u32_t status; /* Status bits sent from ipAudio to Primary OS */ + void *primary_os_buffer_ptr; /* + * Playback: Pointer to next sample to be removed from + * Primary OS sample buffer + * Capture: Pointer to where next sample will be inserted + * into Primary OS sample buffer + */ + + /* + * These are the transfer requests. They are used in alternating + * order so that when ipAudio is processing one request, the + * Primary OS can fill in the other one. + * + * NOTE: The active bit shall always be SET by the producer and + * CLEARED by the consumer, NEVER the other way around. + */ + struct audio_dma dma_xfer_requests[2]; +}; + +#endif diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/auxvec.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/auxvec.h new file mode 100644 index 0000000000..b2275c8578 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/auxvec.h @@ -0,0 +1,32 @@ +/* + * arch/ubicom32/include/asm/auxvec.h + * Symbolic values for the entries in the auxiliary table + * put on the initial stack. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_AUXVEC_H +#define _ASM_UBICOM32_AUXVEC_H + +#endif /* _ASM_UBICOM32_AUXVEC_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/bitops.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/bitops.h new file mode 100644 index 0000000000..c63837b2ed --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/bitops.h @@ -0,0 +1,172 @@ +/* + * arch/ubicom32/include/asm/bitops.h + * Bit manipulation definitions for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_BITOPS_H +#define _ASM_UBICOM32_BITOPS_H + +/* + * Copyright 1992, Linus Torvalds. + */ + +#include <linux/compiler.h> +#include <asm/byteorder.h> /* swab32 */ + +#ifdef __KERNEL__ + +#ifndef _LINUX_BITOPS_H +#error only <linux/bitops.h> can be included directly +#endif + +#include <asm-generic/bitops/ffs.h> +#include <asm-generic/bitops/__ffs.h> + +#include <asm-generic/bitops/sched.h> +#include <asm-generic/bitops/ffz.h> + +#include <asm/ubicom32-common.h> + +static inline void set_bit(int bit, volatile unsigned long *p) +{ + unsigned long mask = 1UL << (bit & 31); + + p += bit >> 5; + + __atomic_lock_acquire(); + *p |= mask; + __atomic_lock_release(); +} + +static inline void clear_bit(int bit, volatile unsigned long *p) +{ + unsigned long mask = 1UL << (bit & 31); + + p += bit >> 5; + + __atomic_lock_acquire(); + *p &= ~mask; + __atomic_lock_release(); +} + +/* + * clear_bit() doesn't provide any barrier for the compiler. + */ +#define smp_mb__before_clear_bit() barrier() +#define smp_mb__after_clear_bit() barrier() + +static inline void change_bit(int bit, volatile unsigned long *p) +{ + unsigned long mask = 1UL << (bit & 31); + + p += bit >> 5; + + __atomic_lock_acquire(); + *p ^= mask; + __atomic_lock_release(); +} + +static inline int test_and_set_bit(int bit, volatile unsigned long *p) +{ + unsigned int res; + unsigned long mask = 1UL << (bit & 31); + + p += bit >> 5; + + __atomic_lock_acquire(); + res = *p; + *p = res | mask; + __atomic_lock_release(); + + return res & mask; +} + +static inline int test_and_clear_bit(int bit, volatile unsigned long *p) +{ + unsigned int res; + unsigned long mask = 1UL << (bit & 31); + + p += bit >> 5; + + __atomic_lock_acquire(); + res = *p; + *p = res & ~mask; + __atomic_lock_release(); + + return res & mask; +} + +static inline int test_and_change_bit(int bit, volatile unsigned long *p) +{ + unsigned int res; + unsigned long mask = 1UL << (bit & 31); + + p += bit >> 5; + + __atomic_lock_acquire(); + res = *p; + *p = res ^ mask; + __atomic_lock_release(); + + return res & mask; +} + +#include <asm-generic/bitops/non-atomic.h> + +/* + * This routine doesn't need to be atomic. + */ +static inline int __constant_test_bit(int nr, const volatile unsigned long *addr) +{ + return ((1UL << (nr & 31)) & (((const volatile unsigned int *) addr)[nr >> 5])) != 0; +} + +static inline int __test_bit(int nr, const volatile unsigned long *addr) +{ + int * a = (int *) addr; + int mask; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + return ((mask & *a) != 0); +} + +#define test_bit(nr,addr) (__builtin_constant_p(nr) ? __constant_test_bit((nr),(addr)) : __test_bit((nr),(addr))) + +#include <asm-generic/bitops/find.h> +#include <asm-generic/bitops/hweight.h> +#include <asm-generic/bitops/lock.h> + +#include <asm-generic/bitops/ext2-non-atomic.h> +#include <asm-generic/bitops/ext2-atomic.h> +#include <asm-generic/bitops/minix.h> + +#endif /* __KERNEL__ */ + +#include <asm-generic/bitops/fls.h> +#include <asm-generic/bitops/__fls.h> +#include <asm-generic/bitops/fls64.h> + +#endif /* _ASM_UBICOM32_BITOPS_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/board.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/board.h new file mode 100644 index 0000000000..9df4c0f048 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/board.h @@ -0,0 +1,34 @@ +/* + * arch/ubicom32/include/asm/board.h + * Board init and revision definitions for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_BOARD_H +#define _ASM_UBICOM32_BOARD_H + +extern const char *board_get_revision(void); +extern void __init board_init(void); + +#endif /* _ASM_UBICOM32_BOARD_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/bootargs.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/bootargs.h new file mode 100644 index 0000000000..95ec393c60 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/bootargs.h @@ -0,0 +1,34 @@ +/* + * arch/ubicom32/include/asm/bootargs.h + * Kernel command line via the devtree API. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_BOOTARGS_H +#define _ASM_UBICOM32_BOOTARGS_H + +extern const char *bootargs_get_cmdline(void); +extern void __init bootargs_init(void); + +#endif /* _ASM_UBICOM32_BOOTARGS_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/bootinfo.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/bootinfo.h new file mode 100644 index 0000000000..79653911e4 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/bootinfo.h @@ -0,0 +1,34 @@ +/* + * arch/ubicom32/include/asm/bootinfo.h + * Definitions of firmware boot parameters passed to the kernel. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ + +#ifndef _ASM_UBICOM32_BOOTINFO_H +#define _ASM_UBICOM32_BOOTINFO_H + +/* Nothing for ubicom32 */ + +#endif /* _ASM_UBICOM32_BOOTINFO_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/bug.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/bug.h new file mode 100644 index 0000000000..b6a000daca --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/bug.h @@ -0,0 +1,95 @@ +/* + * arch/ubicom32/include/asm/bug.h + * Generic bug.h for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_BUG_H +#define _ASM_UBICOM32_BUG_H + +#include <linux/kernel.h> +#include <asm/thread.h> + +#if defined(CONFIG_BUG) && defined(CONFIG_STOP_ON_BUG) + +/* + * BUG() + * Ubicom specific version of the BUG() macro. + * + * This implementation performs a THREAD_STALL stopping all threads before + * calling panic. This enables a developer to see the "real" state of the + * machine (since panic alters the system state). We do the printf first + * because while it is slow, it does not alter system state (like + * interrupts). + * + * TODO: Implement the trap sequence used by other architectures. + */ +#define BUG() do { \ + printk("BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __func__); \ + THREAD_STALL; \ + panic("BUG!"); \ +} while (0) + + +/* + * __WARN() + * WARN() using printk() for now. + * + * TODO: Implement the trap sequence used by other architectures. + */ +#define __WARN() \ + do { \ + printk("WARN: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __func__); \ + } while(0) + +/* + * WARN_ON() + * Ubicom specific version of the WARN_ON macro. + * + * This implementation performs a printk for the WARN_ON() instead + * of faulting into the kernel and using report_bug(). + * + * TODO: Implement the trap sequence used by other architectures. + */ +#define WARN_ON(x) ({ \ + int __ret_warn_on = !!(x); \ + if (__builtin_constant_p(__ret_warn_on)) { \ + if (__ret_warn_on) \ + __WARN(); \ + } else { \ + if (unlikely(__ret_warn_on)) \ + __WARN(); \ + } \ + unlikely(__ret_warn_on); \ +}) + + +#define HAVE_ARCH_BUG +#define HAVE_ARCH_WARN_ON + +#endif + +#include <asm-generic/bug.h> + +#endif /* _ASM_UBICOM32_BUG_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/bugs.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/bugs.h new file mode 100644 index 0000000000..66adfe7b01 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/bugs.h @@ -0,0 +1,44 @@ +/* + * arch/ubicom32/include/asm/bugs.h + * Definition of check_bugs() for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * Copyright (C) 1994 Linus Torvalds + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ + +/* + * This is included by init/main.c to check for architecture-dependent bugs. + * + * Needs: + * void check_bugs(void); + */ + +#ifndef _ASM_UBICOM32_BUGS_H +#define _ASM_UBICOM32_BUGS_H + +static void check_bugs(void) +{ +} + +#endif /* _ASM_UBICOM32_BUGS_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/byteorder.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/byteorder.h new file mode 100644 index 0000000000..e4cd7c92f1 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/byteorder.h @@ -0,0 +1,33 @@ +/* + * arch/ubicom32/include/asm/byteorder.h + * Byte order swapping utility routines. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_BYTEORDER_H +#define _ASM_UBICOM32_BYTEORDER_H + +#include <linux/byteorder/big_endian.h> + +#endif /* _ASM_UBICOM32_BYTEORDER_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/cache.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/cache.h new file mode 100644 index 0000000000..5fcd36db7d --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/cache.h @@ -0,0 +1,40 @@ +/* + * arch/ubicom32/include/asm/cache.h + * Cache line definitions for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_CACHE_H +#define _ASM_UBICOM32_CACHE_H + +/* + * bytes per L1 cache line + */ +#define L1_CACHE_SHIFT 5 +#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) + +#define __cacheline_aligned +#define ____cacheline_aligned + +#endif /* _ASM_UBICOM32_CACHE_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/cachectl.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/cachectl.h new file mode 100644 index 0000000000..12a9159e51 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/cachectl.h @@ -0,0 +1,39 @@ +/* + * arch/ubicom32/include/asm/cachectl.h + * Ubicom32 cache control definitions. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_CACHECTL_H +#define _ASM_UBICOM32_CACHECTL_H + +#include <asm/ip5000.h> + +/* + * mem_cache_control() + * Special cache control operation + */ +extern void mem_cache_control(unsigned long cc, unsigned long begin_addr, unsigned long end_addr, unsigned long op); + +#endif /* _ASM_UBICOM32_CACHECTL_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/cacheflush.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/cacheflush.h new file mode 100644 index 0000000000..10a8141e5c --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/cacheflush.h @@ -0,0 +1,111 @@ +/* + * arch/ubicom32/include/asm/cacheflush.h + * Cache flushing definitions for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_CACHEFLUSH_H +#define _ASM_UBICOM32_CACHEFLUSH_H + +/* + * (C) Copyright 2000-2004, Greg Ungerer <gerg@snapgear.com> + */ +#include <linux/mm.h> +#include <asm/cachectl.h> +#include <asm/ip5000.h> + +#define flush_cache_all() __flush_cache_all() +#define flush_cache_mm(mm) do { } while (0) +#define flush_cache_dup_mm(mm) do { } while (0) +#define flush_cache_range(vma, start, end) __flush_cache_all() +#define flush_cache_page(vma, vmaddr) do { } while (0) +#define flush_dcache_page(page) do { } while (0) +#define flush_dcache_mmap_lock(mapping) do { } while (0) +#define flush_dcache_mmap_unlock(mapping) do { } while (0) + +#define flush_dcache_range(start, end) \ +do { \ + /* Flush the data cache and invalidate the I cache. */ \ + mem_cache_control(DCCR_BASE, start, end, CCR_CTRL_FLUSH_ADDR); \ + mem_cache_control(ICCR_BASE, start, end, CCR_CTRL_INV_ADDR); \ +} while (0) + +#define flush_icache_range(start, end) \ +do { \ + /* Flush the data cache and invalidate the I cache. */ \ + mem_cache_control(DCCR_BASE, start, end, CCR_CTRL_FLUSH_ADDR); \ + mem_cache_control(ICCR_BASE, start, end, CCR_CTRL_INV_ADDR); \ +} while (0) + +#define flush_icache_page(vma,pg) do { } while (0) +#define flush_icache_user_range(vma,pg,adr,len) do { } while (0) +#define flush_cache_vmap(start, end) do { } while (0) +#define flush_cache_vunmap(start, end) do { } while (0) + +#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ + memcpy(dst, src, len) +#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ + memcpy(dst, src, len) + +/* + * Cache handling for IP5000 + */ +extern inline void mem_cache_invalidate_all(unsigned long cc) +{ + if (cc == DCCR_BASE) + UBICOM32_LOCK(DCCR_LOCK_BIT); + else + UBICOM32_LOCK(ICCR_LOCK_BIT); + + asm volatile ( + " bset "D(CCR_CTRL)"(%0), "D(CCR_CTRL)"(%0), #"D(CCR_CTRL_RESET)" \n\t" + " nop \n\t" + " bclr "D(CCR_CTRL)"(%0), "D(CCR_CTRL)"(%0), #"D(CCR_CTRL_RESET)" \n\t" + " pipe_flush 0 \n\t" + : + : "a"(cc) + : "cc" + ); + + if (cc == DCCR_BASE) + UBICOM32_UNLOCK(DCCR_LOCK_BIT); + else + UBICOM32_UNLOCK(ICCR_LOCK_BIT); + +} + +static inline void __flush_cache_all(void) +{ + /* + * Flush Icache + */ + mem_cache_invalidate_all(ICCR_BASE); + + /* + * Flush Dcache + */ + mem_cache_invalidate_all(DCCR_BASE); +} + +#endif /* _ASM_UBICOM32_CACHEFLUSH_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/checksum.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/checksum.h new file mode 100644 index 0000000000..25f8ca61cb --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/checksum.h @@ -0,0 +1,149 @@ +/* + * arch/ubicom32/include/asm/checksum.h + * Checksum utilities for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_CHECKSUM_H +#define _ASM_UBICOM32_CHECKSUM_H + +#include <linux/in6.h> + +/* + * computes the checksum of a memory block at buff, length len, + * and adds in "sum" (32-bit) + * + * returns a 32-bit number suitable for feeding into itself + * or csum_tcpudp_magic + * + * this function must be called with even lengths, except + * for the last fragment, which may be odd + * + * it's best to have buff aligned on a 32-bit boundary + */ +__wsum csum_partial(const void *buff, int len, __wsum sum); + +/* + * the same as csum_partial, but copies from src while it + * checksums + * + * here even more important to align src and dst on a 32-bit (or even + * better 64-bit) boundary + */ + +__wsum csum_partial_copy_nocheck(const void *src, void *dst, + int len, __wsum sum); + + +/* + * the same as csum_partial_copy, but copies from user space. + * + * here even more important to align src and dst on a 32-bit (or even + * better 64-bit) boundary + */ + +extern __wsum csum_partial_copy_from_user(const void __user *src, + void *dst, int len, __wsum sum, int *csum_err); + +__sum16 ip_fast_csum(const void *iph, unsigned int ihl); + +/* + * Fold a partial checksum + */ + +static inline __sum16 csum_fold(__wsum sum) +{ + asm volatile ( + " lsr.4 d15, %0, #16 \n\t" + " bfextu %0, %0, #16 \n\t" + " add.4 %0, d15, %0 \n\t" + " lsr.4 d15, %0, #16 \n\t" + " bfextu %0, %0, #16 \n\t" + " add.4 %0, d15, %0 \n\t" + : "=&d" (sum) + : "0"(sum) + : "d15" + ); + return (__force __sum16)~sum; +} + + +/* + * computes the checksum of the TCP/UDP pseudo-header + * returns a 16-bit checksum, already complemented + */ + +static inline __wsum +csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len, + unsigned short proto, __wsum sum) +{ + asm volatile ( + " add.4 %0, %2, %0 \n\t" + " addc %0, %3, %0 \n\t" + " addc %0, %4, %0 \n\t" + " addc %0, %5, %0 \n\t" + " addc %0, #0, %0 \n\t" + : "=&d" (sum) + : "0"(sum), "r" (saddr), "r" (daddr), "r" (len), "r"(proto) + ); + return sum; +} + +static inline __sum16 +csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len, + unsigned short proto, __wsum sum) +{ + return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum)); +} + +/* + * this routine is used for miscellaneous IP-like checksums, mainly + * in icmp.c + */ +extern __sum16 ip_compute_csum(const void *buff, int len); + +#define _HAVE_ARCH_IPV6_CSUM + +static __inline__ __sum16 +csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr, + __u32 len, unsigned short proto, __wsum sum) +{ + asm volatile ( + " add.4 %0, 0(%2), %0 \n\t" + " addc %0, 4(%2), %0 \n\t" + " addc %0, 8(%2), %0 \n\t" + " addc %0, 12(%2), %0 \n\t" + " addc %0, 0(%3), %0 \n\t" + " addc %0, 4(%3), %0 \n\t" + " addc %0, 8(%3), %0 \n\t" + " addc %0, 12(%3), %0 \n\t" + " addc %0, %4, %0 \n\t" + " addc %0, #0, %0 \n\t" + : "=&d" (sum) + : "0" (sum), "a" (saddr), "a" (daddr), "d" (len + proto) + ); + return csum_fold(sum); +} + +#endif /* _ASM_UBICOM32_CHECKSUM_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/cpu.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/cpu.h new file mode 100644 index 0000000000..c713b62538 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/cpu.h @@ -0,0 +1,45 @@ +/* + * arch/ubicom32/include/asm/cpu.h + * CPU definitions for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * Copyright (C) 2004-2005 ARM Ltd. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_CPU_H +#define _ASM_UBICOM32_CPU_H + +#include <linux/percpu.h> + +struct cpuinfo_ubicom32 { + unsigned long tid; /* Hardware thread number */ + +#ifdef CONFIG_SMP + volatile unsigned long ipi_pending; /* Bit map of operations to execute */ + unsigned long ipi_count; /* Number of IPI(s) taken on this cpu */ +#endif +}; + +DECLARE_PER_CPU(struct cpuinfo_ubicom32, cpu_data); + +#endif /* _ASM_UBICOM32_CPU_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/cputime.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/cputime.h new file mode 100644 index 0000000000..c794443427 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/cputime.h @@ -0,0 +1,33 @@ +/* + * arch/ubicom32/include/asm/cputime.h + * Generic cputime.h for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_CPUTIME_H +#define _ASM_UBICOM32_CPUTIME_H + +#include <asm-generic/cputime.h> + +#endif /* _ASM_UBICOM32_CPUTIME_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/current.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/current.h new file mode 100644 index 0000000000..2d549bbf78 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/current.h @@ -0,0 +1,44 @@ +/* + * arch/ubicom32/include/asm/current.h + * Definition of get_current() for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * (C) Copyright 2000, Lineo, David McCullough <davidm@uclinux.org> + * (C) Copyright 2002, Greg Ungerer (gerg@snapgear.com) + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_CURRENT_H +#define _ASM_UBICOM32_CURRENT_H + +#include <linux/thread_info.h> + +struct task_struct; + +static inline struct task_struct *get_current(void) +{ + return(current_thread_info()->task); +} + +#define current get_current() + +#endif /* _ASM_UBICOM32_CURRENT_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/delay.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/delay.h new file mode 100644 index 0000000000..0e5025c463 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/delay.h @@ -0,0 +1,75 @@ +/* + * arch/ubicom32/include/asm/delay.h + * Definition of delay routines for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_DELAY_H +#define _ASM_UBICOM32_DELAY_H + +#include <asm/param.h> +#include <asm/ip5000.h> + +static inline void __delay(unsigned long loops) +{ + if (loops == 0) { + return; + } + + asm volatile ( + "1: add.4 %0, #-1, %0 \n\t" + " jmpne.t 1b \n\t" + : "+d" (loops) + ); +} + +/* + * Ubicom32 processor uses fixed 12MHz external OSC. + * So we use that as reference to count 12 cycles/us + */ + +extern unsigned long loops_per_jiffy; + +static inline void _udelay(unsigned long usecs) +{ +#if defined(CONFIG_UBICOM32_V4) || defined(CONFIG_UBICOM32_V3) + asm volatile ( + " add.4 d15, 0(%0), %1 \n\t" + " sub.4 #0, 0(%0), d15 \n\t" + " jmpmi.w.f .-4 \n\t" + : + : "a"(TIMER_BASE + TIMER_MPTVAL), "d"(usecs * (12000000/1000000)) + : "d15" + ); +#else + BUG(); +#endif +} + +/* + * Moved the udelay() function into library code, no longer inlined. + */ +extern void udelay(unsigned long usecs); + +#endif /* _ASM_UBICOM32_DELAY_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/device.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/device.h new file mode 100644 index 0000000000..53de082b0d --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/device.h @@ -0,0 +1,35 @@ +/* + * arch/ubicom32/include/asm/device.h + * Generic device.h for Ubicom32 architecture. + * + * Used for arch specific extensions to struct device + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_DEVICE_H +#define _ASM_UBICOM32_DEVICE_H + +#include <asm-generic/device.h> + +#endif /* _ASM_UBICOM32_DEVICE_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/devtree.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/devtree.h new file mode 100644 index 0000000000..3380c2bea8 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/devtree.h @@ -0,0 +1,52 @@ +/* + * arch/ubicom32/include/asm/devtree.h + * Device Tree Header File (Shared between ultra and the Host OS) + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ + +#ifndef _ASM_UBICOM32_DEVTREE_H +#define _ASM_UBICOM32_DEVTREE_H + +#define DEVTREE_MAX_NAME 32 +#define DEVTREE_IRQ_NONE 0xff +#define DEVTREE_IRQ_DONTCARE 0xff +#define DEVTREE_NODE_MAGIC 0x10203040 + +struct devtree_node { + struct devtree_node *next; + unsigned char sendirq; + unsigned char recvirq; + char name[DEVTREE_MAX_NAME]; + unsigned int magic; +}; + +extern struct devtree_node *devtree; +extern struct devtree_node *devtree_find_by_irq(uint8_t sendirq, uint8_t recvirq); +extern struct devtree_node *devtree_find_node(const char *str); +extern struct devtree_node *devtree_find_next(struct devtree_node **cur); +extern int devtree_irq(struct devtree_node *dn, unsigned char *sendirq, unsigned char *recvirq); +extern void devtree_print(void); + +#endif /* _ASM_UBICOM32_DEVTREE_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/div64.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/div64.h new file mode 100644 index 0000000000..97702617bb --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/div64.h @@ -0,0 +1,33 @@ +/* + * arch/ubicom32/include/asm/div64.h + * Generic div64.h for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_DIV64_H +#define _ASM_UBICOM32_DIV64_H + +#include <asm-generic/div64.h> + +#endif /* _ASM_UBICOM32_DIV64_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/dma-mapping.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/dma-mapping.h new file mode 100644 index 0000000000..87639a4292 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/dma-mapping.h @@ -0,0 +1,328 @@ +/* + * arch/ubicom32/include/asm/dma-mapping.h + * Generic dma-mapping.h for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_DMA_MAPPING_H +#define _ASM_UBICOM32_DMA_MAPPING_H + +#include <linux/scatterlist.h> +#ifdef CONFIG_PCI + +/* we implement the API below in terms of the existing PCI one, + * so include it */ +#include <linux/pci.h> +/* need struct page definitions */ +#include <linux/mm.h> + +static inline int +dma_supported(struct device *dev, u64 mask) +{ + BUG_ON(dev->bus != &pci_bus_type); + + return pci_dma_supported(to_pci_dev(dev), mask); +} + +static inline int +dma_set_mask(struct device *dev, u64 dma_mask) +{ + BUG_ON(dev->bus != &pci_bus_type); + + return pci_set_dma_mask(to_pci_dev(dev), dma_mask); +} + +static inline void * +dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, + gfp_t flag) +{ + BUG_ON(dev->bus != &pci_bus_type); + + return pci_alloc_consistent(to_pci_dev(dev), size, dma_handle); +} + +static inline void +dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, + dma_addr_t dma_handle) +{ + BUG_ON(dev->bus != &pci_bus_type); + + pci_free_consistent(to_pci_dev(dev), size, cpu_addr, dma_handle); +} + +static inline dma_addr_t +dma_map_single(struct device *dev, void *cpu_addr, size_t size, + enum dma_data_direction direction) +{ + BUG_ON(dev->bus != &pci_bus_type); + + return pci_map_single(to_pci_dev(dev), cpu_addr, size, (int)direction); +} + +static inline void +dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, + enum dma_data_direction direction) +{ + BUG_ON(dev->bus != &pci_bus_type); + + pci_unmap_single(to_pci_dev(dev), dma_addr, size, (int)direction); +} + +static inline dma_addr_t +dma_map_page(struct device *dev, struct page *page, + unsigned long offset, size_t size, + enum dma_data_direction direction) +{ + BUG_ON(dev->bus != &pci_bus_type); + + return pci_map_page(to_pci_dev(dev), page, offset, size, (int)direction); +} + +static inline void +dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size, + enum dma_data_direction direction) +{ + BUG_ON(dev->bus != &pci_bus_type); + + pci_unmap_page(to_pci_dev(dev), dma_address, size, (int)direction); +} + +static inline int +dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, + enum dma_data_direction direction) +{ + BUG_ON(dev->bus != &pci_bus_type); + + return pci_map_sg(to_pci_dev(dev), sg, nents, (int)direction); +} + +static inline void +dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries, + enum dma_data_direction direction) +{ + BUG_ON(dev->bus != &pci_bus_type); + + pci_unmap_sg(to_pci_dev(dev), sg, nhwentries, (int)direction); +} + +static inline void +dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size, + enum dma_data_direction direction) +{ + BUG_ON(dev->bus != &pci_bus_type); + + pci_dma_sync_single_for_cpu(to_pci_dev(dev), dma_handle, + size, (int)direction); +} + +static inline void +dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, size_t size, + enum dma_data_direction direction) +{ + BUG_ON(dev->bus != &pci_bus_type); + + pci_dma_sync_single_for_device(to_pci_dev(dev), dma_handle, + size, (int)direction); +} + +static inline void +dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems, + enum dma_data_direction direction) +{ + BUG_ON(dev->bus != &pci_bus_type); + + pci_dma_sync_sg_for_cpu(to_pci_dev(dev), sg, nelems, (int)direction); +} + +static inline void +dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems, + enum dma_data_direction direction) +{ + BUG_ON(dev->bus != &pci_bus_type); + + pci_dma_sync_sg_for_device(to_pci_dev(dev), sg, nelems, (int)direction); +} + +static inline int +dma_mapping_error(struct device *dev, dma_addr_t dma_addr) +{ + return pci_dma_mapping_error(to_pci_dev(dev), dma_addr); +} + + +#else + +static inline int +dma_supported(struct device *dev, u64 mask) +{ + return 0; +} + +static inline int +dma_set_mask(struct device *dev, u64 dma_mask) +{ + BUG(); + return 0; +} + +static inline void * +dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, + gfp_t flag) +{ + BUG(); + return NULL; +} + +static inline void +dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, + dma_addr_t dma_handle) +{ + BUG(); +} + +static inline dma_addr_t +dma_map_single(struct device *dev, void *cpu_addr, size_t size, + enum dma_data_direction direction) +{ + BUG(); + return 0; +} + +static inline void +dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, + enum dma_data_direction direction) +{ + BUG(); +} + +static inline dma_addr_t +dma_map_page(struct device *dev, struct page *page, + unsigned long offset, size_t size, + enum dma_data_direction direction) +{ + BUG(); + return 0; +} + +static inline void +dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size, + enum dma_data_direction direction) +{ + BUG(); +} + +static inline int +dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, + enum dma_data_direction direction) +{ + BUG(); + return 0; +} + +static inline void +dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries, + enum dma_data_direction direction) +{ + BUG(); +} + +static inline void +dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size, + enum dma_data_direction direction) +{ + BUG(); +} + +static inline void +dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, size_t size, + enum dma_data_direction direction) +{ + BUG(); +} + +static inline void +dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems, + enum dma_data_direction direction) +{ + BUG(); +} + +static inline void +dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems, + enum dma_data_direction direction) +{ + BUG(); +} + +static inline int +dma_mapping_error(struct device *dev, dma_addr_t dma_addr) +{ + return 0; +} + +#endif + +/* Now for the API extensions over the pci_ one */ + +#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f) +#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h) +#define dma_is_consistent(d, h) (1) + +static inline int +dma_get_cache_alignment(void) +{ + /* no easy way to get cache size on all processors, so return + * the maximum possible, to be safe */ + return (1 << INTERNODE_CACHE_SHIFT); +} + +static inline void +dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle, + unsigned long offset, size_t size, + enum dma_data_direction direction) +{ + /* just sync everything, that's all the pci API can do */ + dma_sync_single_for_cpu(dev, dma_handle, offset+size, direction); +} + +static inline void +dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle, + unsigned long offset, size_t size, + enum dma_data_direction direction) +{ + /* just sync everything, that's all the pci API can do */ + dma_sync_single_for_device(dev, dma_handle, offset+size, direction); +} + +static inline void +dma_cache_sync(struct device *dev, void *vaddr, size_t size, + enum dma_data_direction direction) +{ + /* could define this in terms of the dma_cache ... operations, + * but if you get this on a platform, you should convert the platform + * to using the generic device DMA API */ + BUG(); +} + +#endif /* _ASM_UBICOM32_DMA_MAPPING_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/dma.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/dma.h new file mode 100644 index 0000000000..c3a10acf97 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/dma.h @@ -0,0 +1,34 @@ +/* + * arch/ubicom32/include/asm/dma.h + * DMA definitions for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_DMA_H +#define _ASM_UBICOM32_DMA_H + +/* Nothing so far */ +#define MAX_DMA_ADDRESS 0x00 /* This is quite suspicious */ + +#endif /* _ASM_UBICOM32_DMA_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/elf.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/elf.h new file mode 100644 index 0000000000..3abc202ac6 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/elf.h @@ -0,0 +1,173 @@ +/* + * arch/ubicom32/include/asm/elf.h + * Definitions for elf executable format for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_ELF_H +#define _ASM_UBICOM32_ELF_H + +/* + * ELF register definitions.. + */ + +#include <asm/ptrace.h> +#include <asm/user.h> + +/* + * Processor specific flags for the ELF header e_flags field. + */ +#define EF_UBICOM32_V3 0x00000001 /* -fmarch=ubicom32v3 */ +#define EF_UBICOM32_V4 0x00000002 /* -fmarch=ubicom32v4 */ +#define EF_UBICOM32_PIC 0x80000000 /* -fpic */ +#define EF_UBICOM32_FDPIC 0x40000000 /* -mfdpic */ + +/* + * Ubicom32 ELF relocation types + */ +#define R_UBICOM32_NONE 0 +#define R_UBICOM32_16 1 +#define R_UBICOM32_32 2 +#define R_UBICOM32_LO16 3 +#define R_UBICOM32_HI16 4 +#define R_UBICOM32_21_PCREL 5 +#define R_UBICOM32_24_PCREL 6 +#define R_UBICOM32_HI24 7 +#define R_UBICOM32_LO7_S 8 +#define R_UBICOM32_LO7_2_S 9 +#define R_UBICOM32_LO7_4_S 10 +#define R_UBICOM32_LO7_D 11 +#define R_UBICOM32_LO7_2_D 12 +#define R_UBICOM32_LO7_4_D 13 +#define R_UBICOM32_32_HARVARD 14 +#define R_UBICOM32_LO7_CALLI 15 +#define R_UBICOM32_LO16_CALLI 16 +#define R_UBICOM32_GOT_HI24 17 +#define R_UBICOM32_GOT_LO7_S 18 +#define R_UBICOM32_GOT_LO7_2_S 19 +#define R_UBICOM32_GOT_LO7_4_S 20 +#define R_UBICOM32_GOT_LO7_D 21 +#define R_UBICOM32_GOT_LO7_2_D 22 +#define R_UBICOM32_GOT_LO7_4_D 23 +#define R_UBICOM32_FUNCDESC_GOT_HI24 24 +#define R_UBICOM32_FUNCDESC_GOT_LO7_S 25 +#define R_UBICOM32_FUNCDESC_GOT_LO7_2_S 26 +#define R_UBICOM32_FUNCDESC_GOT_LO7_4_S 27 +#define R_UBICOM32_FUNCDESC_GOT_LO7_D 28 +#define R_UBICOM32_FUNCDESC_GOT_LO7_2_D 29 +#define R_UBICOM32_FUNCDESC_GOT_LO7_4_D 30 +#define R_UBICOM32_GOT_LO7_CALLI 31 +#define R_UBICOM32_FUNCDESC_GOT_LO7_CALLI 32 +#define R_UBICOM32_FUNCDESC_VALUE 33 +#define R_UBICOM32_FUNCDESC 34 +#define R_UBICOM32_GOTOFFSET_LO 35 +#define R_UBICOM32_GOTOFFSET_HI 36 +#define R_UBICOM32_FUNCDESC_GOTOFFSET_LO 37 +#define R_UBICOM32_FUNCDESC_GOTOFFSET_HI 38 +#define R_UBICOM32_GNU_VTINHERIT 200 +#define R_UBICOM32_GNU_VTENTRY 201 + +typedef unsigned long elf_greg_t; + +#define ELF_NGREG (sizeof(struct pt_regs) / sizeof(elf_greg_t)) +typedef elf_greg_t elf_gregset_t[ELF_NGREG]; + +typedef struct user_ubicom32fp_struct elf_fpregset_t; + +/* + * This is used to ensure we don't load something for the wrong architecture. + */ +#define elf_check_arch(x) ((x)->e_machine == EM_UBICOM32) + +#define elf_check_fdpic(x) ((x)->e_flags & EF_UBICOM32_FDPIC) + +#define elf_check_const_displacement(x) ((x)->e_flags & EF_UBICOM32_PIC) + +/* + * These are used to set parameters in the core dumps. + */ +#define ELF_CLASS ELFCLASS32 +#define ELF_DATA ELFDATA2MSB +#define ELF_ARCH EM_UBICOM32 + +/* For SVR4/m68k the function pointer to be registered with `atexit' is + passed in %a1. Although my copy of the ABI has no such statement, it + is actually used on ASV. */ +#define ELF_PLAT_INIT(_r, load_addr) _r->a1 = 0 + +#define ELF_FDPIC_PLAT_INIT(_regs, _exec_map_addr, _interp_map_addr, \ + _dynamic_addr) \ + do { \ + _regs->dn[1] = _exec_map_addr; \ + _regs->dn[2] = _interp_map_addr; \ + _regs->dn[3] = _dynamic_addr; \ + _regs->an[1] = 0; /* dl_fini will be set by ldso */ \ + } while (0) + +#define USE_ELF_CORE_DUMP +#define ELF_EXEC_PAGESIZE 4096 + +#ifdef __KERNEL__ +#ifdef CONFIG_UBICOM32_V4 +#define ELF_FDPIC_CORE_EFLAGS (EF_UBICOM32_FDPIC | EF_UBICOM32_V4) +#elif defined CONFIG_UBICOM32_V3 +#define ELF_FDPIC_CORE_EFLAGS (EF_UBICOM32_FDPIC | EF_UBICOM32_V3) +#else +#error Unknown/Unsupported ubicom32 architecture. +#endif +#endif + +/* This is the location that an ET_DYN program is loaded if exec'ed. Typical + use of this is to invoke "./ld.so someprog" to test out a new version of + the loader. We need to make sure that it is out of the way of the program + that it will "exec", and that there is sufficient room for the brk. */ + +#define ELF_ET_DYN_BASE 0xD0000000UL + +/* + * For Ubicom32, the elf_gregset_t and struct pt_regs are the same size + * data structure so a copy is performed instead of providing the + * ELF_CORE_COPY_REGS macro. + */ + +/* + * ELF_CORE_COPY_TASK_REGS is needed to dump register state from multi threaded user projects. + */ +extern int dump_task_regs(struct task_struct *, elf_gregset_t *); +#define ELF_CORE_COPY_TASK_REGS(tsk, elf_regs) dump_task_regs(tsk, elf_regs) + +/* This yields a mask that user programs can use to figure out what + instruction set this cpu supports. */ + +#define ELF_HWCAP (0) + +/* This yields a string that ld.so will use to load implementation + specific libraries for optimization. This is more specific in + intent than poking at uname or /proc/cpuinfo. */ + +#define ELF_PLATFORM (NULL) + +#define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX) + +#endif /* _ASM_UBICOM32_ELF_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/emergency-restart.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/emergency-restart.h new file mode 100644 index 0000000000..ea39e58ce8 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/emergency-restart.h @@ -0,0 +1,33 @@ +/* + * arch/ubicom32/include/asm/emergency-restart.h + * Generic emergency-restart.h for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_EMERGENCY_RESTART_H +#define _ASM_UBICOM32_EMERGENCY_RESTART_H + +#include <asm-generic/emergency-restart.h> + +#endif /* _ASM_UBICOM32_EMERGENCY_RESTART_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/entry.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/entry.h new file mode 100644 index 0000000000..5ef46e62de --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/entry.h @@ -0,0 +1,34 @@ +/* + * arch/ubicom32/include/asm/entry.h + * Entry register/stack definitions for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_ENTRY_H +#define _ASM_UBICOM32_ENTRY_H + +#include <asm/setup.h> +#include <asm/page.h> + +#endif /* _ASM_UBICOM32_ENTRY_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/errno.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/errno.h new file mode 100644 index 0000000000..bf995b16af --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/errno.h @@ -0,0 +1,33 @@ +/* + * arch/ubicom32/include/asm/errno.h + * Generic errno.h for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_ERRNO_H +#define _ASM_UBICOM32_ERRNO_H + +#include <asm-generic/errno.h> + +#endif /* _ASM_UBICOM32_ERRNO_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/fb.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/fb.h new file mode 100644 index 0000000000..9e9cc6bc75 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/fb.h @@ -0,0 +1,39 @@ +/* + * arch/ubicom32/include/asm/fb.h + * Definition of fb_is_primary_device() for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_FB_H +#define _ASM_UBICOM32_FB_H +#include <linux/fb.h> + +#define fb_pgprotect(...) do {} while (0) + +static inline int fb_is_primary_device(struct fb_info *info) +{ + return 0; +} + +#endif /* _ASM_UBICOM32_FB_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/fcntl.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/fcntl.h new file mode 100644 index 0000000000..810638c577 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/fcntl.h @@ -0,0 +1,38 @@ +/* + * arch/ubicom32/include/asm/fcntl.h + * File control bit definitions for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_FCNTL_H +#define _ASM_UBICOM32_FCNTL_H + +#define O_DIRECTORY 040000 /* must be a directory */ +#define O_NOFOLLOW 0100000 /* don't follow links */ +#define O_DIRECT 0200000 /* direct disk access hint - currently ignored */ +#define O_LARGEFILE 0400000 + +#include <asm-generic/fcntl.h> + +#endif /* _ASM_UBICOM32_FCNTL_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/flat.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/flat.h new file mode 100644 index 0000000000..84edd478b1 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/flat.h @@ -0,0 +1,73 @@ +/* + * arch/ubicom32/include/asm/flat.h + * Definitions to support flat-format executables. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ + +#ifndef _ASM_UBICOM32_FLAT_H +#define _ASM_UBICOM32_FLAT_H + +#define ARCH_FLAT_ALIGN 0x80 +#define ARCH_FLAT_ALIGN_TEXT 1 + +#define R_UBICOM32_32 2 +#define R_UBICOM32_HI24 7 +#define R_UBICOM32_LO7_S 8 +#define R_UBICOM32_LO7_2_S 9 +#define R_UBICOM32_LO7_4_S 10 +#define R_UBICOM32_LO7_D 11 +#define R_UBICOM32_LO7_2_D 12 +#define R_UBICOM32_LO7_4_D 13 +#define R_UBICOM32_LO7_CALLI 15 +#define R_UBICOM32_LO16_CALLI 16 + +extern void ubicom32_flat_put_addr_at_rp(unsigned long *rp, u32_t val, u32_t rval, unsigned long *p); +extern unsigned long ubicom32_flat_get_addr_from_rp(unsigned long *rp, u32_t relval, u32_t flags, unsigned long *p); + +#define flat_stack_align(sp) /* nothing needed */ +#define flat_argvp_envp_on_stack() 1 +#define flat_old_ram_flag(flags) (flags) +#define flat_reloc_valid(reloc, size) ((reloc) <= (size)) +#define flat_get_addr_from_rp(rp, relval, flags, p) (ubicom32_flat_get_addr_from_rp(rp, relval,flags, p)) +#define flat_put_addr_at_rp(rp, val, relval) do {ubicom32_flat_put_addr_at_rp(rp, val, relval, &persistent);} while(0) +#define flat_get_relocate_addr(rel) ((persistent) ? (persistent & 0x07ffffff) : (rel & 0x07ffffff)) + +static inline int flat_set_persistent(unsigned int relval, unsigned long *p) +{ + if (*p) { + return 0; + } else { + if ((relval >> 27) != R_UBICOM32_32) { + /* + * Something other than UBICOM32_32. The next entry has the relocation. + */ + *p = relval; + return 1; + } + } + return 0; +} + +#endif /* _ASM_UBICOM32_FLAT_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/fpu.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/fpu.h new file mode 100644 index 0000000000..496b7ddc3d --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/fpu.h @@ -0,0 +1,37 @@ +/* + * arch/ubicom32/include/asm/fpu.h + * Floating point state definitions for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_FPU_H +#define _ASM_UBICOM32_FPU_H + +/* + * MAX floating point unit state size (FSAVE/FRESTORE) + */ +/* No FP unit present then... */ +#define FPSTATESIZE (2) /* dummy size */ + +#endif /* _ASM_UBICOM32_FPU_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/ftrace.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/ftrace.h new file mode 100644 index 0000000000..40a8c178f1 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/ftrace.h @@ -0,0 +1 @@ +/* empty */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/futex.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/futex.h new file mode 100644 index 0000000000..8c84b31f3b --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/futex.h @@ -0,0 +1,33 @@ +/* + * arch/ubicom32/include/asm/futex.h + * Generic futex.h for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_FUTEX_H +#define _ASM_UBICOM32_FUTEX_H + +#include <asm-generic/futex.h> + +#endif /* _ASM_UBICOM32_FUTEX_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/gpio.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/gpio.h new file mode 100644 index 0000000000..1f834f35bf --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/gpio.h @@ -0,0 +1,453 @@ +/* + * arch/ubicom32/include/asm/gpio.h + * Definitions for GPIO operations on Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_GPIO_H +#define _ASM_UBICOM32_GPIO_H + +#include <linux/compiler.h> +#include <asm/irq.h> + +#include <asm/ip5000.h> + +#define ARCH_NR_GPIOS 512 +#define MAX_UBICOM_ONCHIP_GPIO (9 * 32) + +/* + * Macros for manipulating GPIO numbers + */ +#define gpio_bit(gn) (1 << (gn & 0x1f)) +#define gpio_bank(gn) (gn >> 5) + +#define gpio_pin_index(gn) (gn & 0x1f) +#define gpio_port_index(gn) (gn >> 5) + +#define GPIO_RA_0 ((32 * 0) + 0) +#define GPIO_RA_1 ((32 * 0) + 1) +#define GPIO_RA_2 ((32 * 0) + 2) +#define GPIO_RA_3 ((32 * 0) + 3) +#define GPIO_RA_4 ((32 * 0) + 4) +#define GPIO_RA_5 ((32 * 0) + 5) +#define GPIO_RA_6 ((32 * 0) + 6) +#define GPIO_RA_7 ((32 * 0) + 7) + +#define GPIO_RB_0 ((32 * 1) + 0) +#define GPIO_RB_1 ((32 * 1) + 1) +#define GPIO_RB_2 ((32 * 1) + 2) +#define GPIO_RB_3 ((32 * 1) + 3) +#define GPIO_RB_4 ((32 * 1) + 4) +#define GPIO_RB_5 ((32 * 1) + 5) +#define GPIO_RB_6 ((32 * 1) + 6) +#define GPIO_RB_7 ((32 * 1) + 7) +#define GPIO_RB_8 ((32 * 1) + 8) +#define GPIO_RB_9 ((32 * 1) + 9) +#define GPIO_RB_10 ((32 * 1) + 10) +#define GPIO_RB_11 ((32 * 1) + 11) +#define GPIO_RB_12 ((32 * 1) + 12) +#define GPIO_RB_13 ((32 * 1) + 13) +#define GPIO_RB_14 ((32 * 1) + 14) +#define GPIO_RB_15 ((32 * 1) + 15) +#define GPIO_RB_16 ((32 * 1) + 16) +#define GPIO_RB_17 ((32 * 1) + 17) +#define GPIO_RB_18 ((32 * 1) + 18) +#define GPIO_RB_19 ((32 * 1) + 19) + +#define GPIO_RC_0 ((32 * 2) + 0) +#define GPIO_RC_1 ((32 * 2) + 1) +#define GPIO_RC_2 ((32 * 2) + 2) +#define GPIO_RC_3 ((32 * 2) + 3) +#define GPIO_RC_4 ((32 * 2) + 4) +#define GPIO_RC_5 ((32 * 2) + 5) +#define GPIO_RC_6 ((32 * 2) + 6) +#define GPIO_RC_7 ((32 * 2) + 7) +#define GPIO_RC_8 ((32 * 2) + 8) +#define GPIO_RC_9 ((32 * 2) + 9) +#define GPIO_RC_10 ((32 * 2) + 10) +#define GPIO_RC_11 ((32 * 2) + 11) +#define GPIO_RC_12 ((32 * 2) + 12) +#define GPIO_RC_13 ((32 * 2) + 13) +#define GPIO_RC_14 ((32 * 2) + 14) +#define GPIO_RC_15 ((32 * 2) + 15) +#define GPIO_RC_16 ((32 * 2) + 16) +#define GPIO_RC_17 ((32 * 2) + 17) +#define GPIO_RC_18 ((32 * 2) + 18) +#define GPIO_RC_19 ((32 * 2) + 19) +#define GPIO_RC_20 ((32 * 2) + 20) +#define GPIO_RC_21 ((32 * 2) + 21) +#define GPIO_RC_22 ((32 * 2) + 22) +#define GPIO_RC_23 ((32 * 2) + 23) +#define GPIO_RC_24 ((32 * 2) + 24) +#define GPIO_RC_25 ((32 * 2) + 25) +#define GPIO_RC_26 ((32 * 2) + 26) +#define GPIO_RC_27 ((32 * 2) + 27) +#define GPIO_RC_28 ((32 * 2) + 28) +#define GPIO_RC_29 ((32 * 2) + 29) +#define GPIO_RC_30 ((32 * 2) + 30) +#define GPIO_RC_31 ((32 * 2) + 31) + +#define GPIO_RD_0 ((32 * 3) + 0) +#define GPIO_RD_1 ((32 * 3) + 1) +#define GPIO_RD_2 ((32 * 3) + 2) +#define GPIO_RD_3 ((32 * 3) + 3) +#define GPIO_RD_4 ((32 * 3) + 4) +#define GPIO_RD_5 ((32 * 3) + 5) +#define GPIO_RD_6 ((32 * 3) + 6) +#define GPIO_RD_7 ((32 * 3) + 7) +#define GPIO_RD_8 ((32 * 3) + 8) +#define GPIO_RD_9 ((32 * 3) + 9) +#define GPIO_RD_10 ((32 * 3) + 10) +#define GPIO_RD_11 ((32 * 3) + 11) + +#define GPIO_RE_0 ((32 * 4) + 0) +#define GPIO_RE_1 ((32 * 4) + 1) +#define GPIO_RE_2 ((32 * 4) + 2) +#define GPIO_RE_3 ((32 * 4) + 3) +#define GPIO_RE_4 ((32 * 4) + 4) +#define GPIO_RE_5 ((32 * 4) + 5) +#define GPIO_RE_6 ((32 * 4) + 6) +#define GPIO_RE_7 ((32 * 4) + 7) + +#define GPIO_RF_0 ((32 * 5) + 0) +#define GPIO_RF_1 ((32 * 5) + 1) +#define GPIO_RF_2 ((32 * 5) + 2) +#define GPIO_RF_3 ((32 * 5) + 3) +#define GPIO_RF_4 ((32 * 5) + 4) +#define GPIO_RF_5 ((32 * 5) + 5) +#define GPIO_RF_6 ((32 * 5) + 6) +#define GPIO_RF_7 ((32 * 5) + 7) +#define GPIO_RF_8 ((32 * 5) + 8) +#define GPIO_RF_9 ((32 * 5) + 9) +#define GPIO_RF_10 ((32 * 5) + 10) +#define GPIO_RF_11 ((32 * 5) + 11) +#define GPIO_RF_12 ((32 * 5) + 12) +#define GPIO_RF_13 ((32 * 5) + 13) +#define GPIO_RF_14 ((32 * 5) + 14) +#define GPIO_RF_15 ((32 * 5) + 15) + +#define GPIO_RG_0 ((32 * 6) + 0) +#define GPIO_RG_1 ((32 * 6) + 1) +#define GPIO_RG_2 ((32 * 6) + 2) +#define GPIO_RG_3 ((32 * 6) + 3) +#define GPIO_RG_4 ((32 * 6) + 4) +#define GPIO_RG_5 ((32 * 6) + 5) +#define GPIO_RG_6 ((32 * 6) + 6) +#define GPIO_RG_7 ((32 * 6) + 7) +#define GPIO_RG_8 ((32 * 6) + 8) +#define GPIO_RG_9 ((32 * 6) + 9) +#define GPIO_RG_10 ((32 * 6) + 10) +#define GPIO_RG_11 ((32 * 6) + 11) +#define GPIO_RG_12 ((32 * 6) + 12) +#define GPIO_RG_13 ((32 * 6) + 13) +#define GPIO_RG_14 ((32 * 6) + 14) +#define GPIO_RG_15 ((32 * 6) + 15) +#define GPIO_RG_16 ((32 * 6) + 16) +#define GPIO_RG_17 ((32 * 6) + 17) +#define GPIO_RG_18 ((32 * 6) + 18) +#define GPIO_RG_19 ((32 * 6) + 19) +#define GPIO_RG_20 ((32 * 6) + 20) +#define GPIO_RG_21 ((32 * 6) + 21) +#define GPIO_RG_22 ((32 * 6) + 22) +#define GPIO_RG_23 ((32 * 6) + 23) +#define GPIO_RG_24 ((32 * 6) + 24) +#define GPIO_RG_25 ((32 * 6) + 25) +#define GPIO_RG_26 ((32 * 6) + 26) +#define GPIO_RG_27 ((32 * 6) + 27) +#define GPIO_RG_28 ((32 * 6) + 28) +#define GPIO_RG_29 ((32 * 6) + 29) +#define GPIO_RG_30 ((32 * 6) + 30) +#define GPIO_RG_31 ((32 * 6) + 31) + +#define GPIO_RH_0 ((32 * 7) + 0) +#define GPIO_RH_1 ((32 * 7) + 1) +#define GPIO_RH_2 ((32 * 7) + 2) +#define GPIO_RH_3 ((32 * 7) + 3) +#define GPIO_RH_4 ((32 * 7) + 4) +#define GPIO_RH_5 ((32 * 7) + 5) +#define GPIO_RH_6 ((32 * 7) + 6) +#define GPIO_RH_7 ((32 * 7) + 7) +#define GPIO_RH_8 ((32 * 7) + 8) +#define GPIO_RH_9 ((32 * 7) + 9) + +#define GPIO_RI_0 ((32 * 8) + 0) +#define GPIO_RI_1 ((32 * 8) + 1) +#define GPIO_RI_2 ((32 * 8) + 2) +#define GPIO_RI_3 ((32 * 8) + 3) +#define GPIO_RI_4 ((32 * 8) + 4) +#define GPIO_RI_5 ((32 * 8) + 5) +#define GPIO_RI_6 ((32 * 8) + 6) +#define GPIO_RI_7 ((32 * 8) + 7) +#define GPIO_RI_8 ((32 * 8) + 8) +#define GPIO_RI_9 ((32 * 8) + 9) +#define GPIO_RI_10 ((32 * 8) + 10) +#define GPIO_RI_11 ((32 * 8) + 11) +#define GPIO_RI_12 ((32 * 8) + 12) +#define GPIO_RI_13 ((32 * 8) + 13) +#define GPIO_RI_14 ((32 * 8) + 14) +#define GPIO_RI_15 ((32 * 8) + 15) + +/* + * The following section defines extra GPIO available to some boards. + * These GPIO are generally external to the processor (i.e. SPI/I2C + * expander chips). + * + * Note that these defines show all possible GPIO available, however, + * depending on the actual board configuration, some GPIO are not + * available for use. + */ +#ifdef CONFIG_IP7500MEDIA +/* + * U15 + */ +#define IP7500MEDIA_U15_BASE (32 * 10) +#define IP7500MEDIA_IO0 (IP7500MEDIA_U15_BASE + 0) +#define IP7500MEDIA_IO1 (IP7500MEDIA_U15_BASE + 1) +#define IP7500MEDIA_IO2 (IP7500MEDIA_U15_BASE + 2) +#define IP7500MEDIA_IO3 (IP7500MEDIA_U15_BASE + 3) +#define IP7500MEDIA_IO4 (IP7500MEDIA_U15_BASE + 4) +#define IP7500MEDIA_IO5 (IP7500MEDIA_U15_BASE + 5) +#define IP7500MEDIA_IO6 (IP7500MEDIA_U15_BASE + 6) +#define IP7500MEDIA_IO7 (IP7500MEDIA_U15_BASE + 7) + +/* + * U16 + */ +#define IP7500MEDIA_U16_BASE (32 * 11) +#define IP7500MEDIA_IO8 (IP7500MEDIA_U16_BASE + 0) +#define IP7500MEDIA_IO9 (IP7500MEDIA_U16_BASE + 1) +#define IP7500MEDIA_IO10 (IP7500MEDIA_U16_BASE + 2) +#define IP7500MEDIA_IO11 (IP7500MEDIA_U16_BASE + 3) +#define IP7500MEDIA_IO12 (IP7500MEDIA_U16_BASE + 4) +#define IP7500MEDIA_IO13 (IP7500MEDIA_U16_BASE + 5) +#define IP7500MEDIA_IO14 (IP7500MEDIA_U16_BASE + 6) +#define IP7500MEDIA_IO15 (IP7500MEDIA_U16_BASE + 7) + +/* + * U17 + */ +#define IP7500MEDIA_U17_BASE (32 * 12) +#define IP7500MEDIA_IO16 (IP7500MEDIA_U17_BASE + 0) +#define IP7500MEDIA_IO17 (IP7500MEDIA_U17_BASE + 1) +#define IP7500MEDIA_IO18 (IP7500MEDIA_U17_BASE + 2) +#define IP7500MEDIA_IO19 (IP7500MEDIA_U17_BASE + 3) +#define IP7500MEDIA_IO20 (IP7500MEDIA_U17_BASE + 4) +#define IP7500MEDIA_IO21 (IP7500MEDIA_U17_BASE + 5) +#define IP7500MEDIA_IO22 (IP7500MEDIA_U17_BASE + 6) +#define IP7500MEDIA_IO23 (IP7500MEDIA_U17_BASE + 7) + +/* + * U18 + */ +#define IP7500MEDIA_U18_BASE (32 * 13) +#define IP7500MEDIA_IO24 (IP7500MEDIA_U18_BASE + 0) +#define IP7500MEDIA_IO25 (IP7500MEDIA_U18_BASE + 1) +#define IP7500MEDIA_IO26 (IP7500MEDIA_U18_BASE + 2) +#define IP7500MEDIA_IO27 (IP7500MEDIA_U18_BASE + 3) +#define IP7500MEDIA_IO28 (IP7500MEDIA_U18_BASE + 4) +#define IP7500MEDIA_IO29 (IP7500MEDIA_U18_BASE + 5) +#define IP7500MEDIA_IO30 (IP7500MEDIA_U18_BASE + 6) +#define IP7500MEDIA_IO31 (IP7500MEDIA_U18_BASE + 7) +#endif + +#ifdef CONFIG_IP7145DPF +/* + * U48 + */ +#define IP7145DPF_U48_BASE (32 * 10) +#define IP7145DPF_IO0 (IP7145DPF_U48_BASE + 0) +#define IP7145DPF_IO1 (IP7145DPF_U48_BASE + 1) +#define IP7145DPF_IO2 (IP7145DPF_U48_BASE + 2) +#define IP7145DPF_IO3 (IP7145DPF_U48_BASE + 3) +#define IP7145DPF_IO4 (IP7145DPF_U48_BASE + 4) +#define IP7145DPF_IO5 (IP7145DPF_U48_BASE + 5) +#define IP7145DPF_IO6 (IP7145DPF_U48_BASE + 6) +#define IP7145DPF_IO7 (IP7145DPF_U48_BASE + 7) + +/* + * U72 + */ +#define IP7145DPF_U72_BASE (32 * 11) +#define IP7145DPF_IOB0 (IP7145DPF_U72_BASE + 0) +#define IP7145DPF_IOB1 (IP7145DPF_U72_BASE + 1) +#define IP7145DPF_IOB2 (IP7145DPF_U72_BASE + 2) +#define IP7145DPF_IOB3 (IP7145DPF_U72_BASE + 3) +#define IP7145DPF_IOB4 (IP7145DPF_U72_BASE + 4) +#define IP7145DPF_IOB5 (IP7145DPF_U72_BASE + 5) +#define IP7145DPF_IOB6 (IP7145DPF_U72_BASE + 6) +#define IP7145DPF_IOB7 (IP7145DPF_U72_BASE + 7) +#endif + +#include <asm-generic/gpio.h> + +/* + * The following macros bypass gpiolib to generate direct references + * to the port registers. These assume, minimally, that either + * gpio_direction_input() or gpio_direction_output() have already been + * called to setup the pin direction and to enable the pin function to + * be gpio. These macros generate the hardware port address based on + * the assumption that all ports are 32 bits wide (even though we know + * they are not). This is so we can efficiently turn pin numbers into + * port addresses without a lookup. + * + * These operations must be done in one instruction to prevent clobbering + * other thread's accesses to the same port. + */ +#define UBICOM32_GPIO_ENABLE(pin) \ + do { \ + asm volatile ("or.4 (%[port]), (%[port]), %[mask]\n\t" \ + : \ + : [port] "a" (&UBICOM32_IO_PORT(IO_BASE + (gpio_bank(pin) << 12))->gpio_mask), \ + [mask] "d" (gpio_bit(pin)) \ + : "cc", "memory" \ + ); \ + } while (0); + +#define UBICOM32_GPIO_DISABLE(pin) \ + do { \ + asm volatile ("and.4 (%[port]), (%[port]), %[mask]\n\t" \ + : \ + : [port] "a" (&UBICOM32_IO_PORT(IO_BASE + (gpio_bank(pin) << 12))->gpio_mask), \ + [mask] "d" (~gpio_bit(pin)) \ + : "cc", "memory" \ + ); \ + } while (0); + +#define UBICOM32_GPIO_SET_PIN_INPUT(pin) \ + do { \ + asm volatile ("and.4 (%[port]), (%[port]), %[mask]\n\t" \ + : \ + : [port] "a" (&UBICOM32_IO_PORT(IO_BASE + (gpio_bank(pin) << 12))->gpio_ctl), \ + [mask] "d" (~gpio_bit(pin)) \ + : "cc", "memory" \ + ); \ + } while (0); + +#define UBICOM32_GPIO_SET_PIN_OUTPUT(pin) \ + do { \ + asm volatile ("or.4 (%[port]), (%[port]), %[mask]\n\t" \ + : \ + : [port] "a" (&UBICOM32_IO_PORT(IO_BASE + (gpio_bank(pin) << 12))->gpio_ctl), \ + [mask] "d" (gpio_bit(pin)) \ + : "cc", "memory" \ + ); \ + } while (0); + +#define UBICOM32_GPIO_SET_PIN_TOGGLE(pin) \ + do { \ + asm volatile ("xor.4 (%[port]), (%[port]), %[mask]\n\t" \ + : \ + : [port] "a" (&UBICOM32_IO_PORT(IO_BASE + (gpio_bank(pin) << 12))->gpio_out), \ + [mask] "d" (gpio_bit(pin)) \ + : "cc", "memory" \ + ); \ + } while (0); + +#define UBICOM32_GPIO_SET_PIN_HIGH(pin) \ + do { \ + asm volatile ("or.4 (%[port]), (%[port]), %[mask]\n\t" \ + : \ + : [port] "a" (&UBICOM32_IO_PORT(IO_BASE + (gpio_bank(pin) << 12))->gpio_out), \ + [mask] "d" (gpio_bit(pin)) \ + : "cc", "memory" \ + ); \ + } while (0); + +#define UBICOM32_GPIO_SET_PIN_LOW(pin) \ + do { \ + asm volatile ("and.4 (%[port]), (%[port]), %[mask]\n\t" \ + : \ + : [port] "a" (&UBICOM32_IO_PORT(IO_BASE + (gpio_bank(pin) << 12))->gpio_out), \ + [mask] "d" (~gpio_bit(pin)) \ + : "cc", "memory" \ + ); \ + } while (0); + +#define UBICOM32_GPIO_SET_PIN(pin, val) \ + if ( val ) { \ + UBICOM32_GPIO_SET_PIN_HIGH(pin); \ + } else { \ + UBICOM32_GPIO_SET_PIN_LOW(pin); \ + } + +#define UBICOM32_GPIO_GET_PIN(pin) \ + (0 != (UBICOM32_IO_PORT(IO_BASE + (gpio_bank(pin) << 12))->gpio_in \ + & gpio_bit(pin))) + + +static inline int gpio_get_value(unsigned gpio) +{ + if (gpio <= MAX_UBICOM_ONCHIP_GPIO) + return UBICOM32_GPIO_GET_PIN(gpio); + else + return __gpio_get_value(gpio); +} + +static inline void gpio_set_value(unsigned gpio, int value) +{ + if (gpio <= MAX_UBICOM_ONCHIP_GPIO) + { + UBICOM32_GPIO_SET_PIN(gpio, value); + } + else + { + __gpio_set_value(gpio, value); + } +} + +static inline int gpio_cansleep(unsigned gpio) +{ + return __gpio_cansleep(gpio); +} + +static inline int gpio_to_irq(unsigned gpio) +{ +#if defined(IP5000) || defined(IP5000_REV2) + if ((gpio >= GPIO_RA_4) && (gpio <= GPIO_RA_6)) + return 25; + else + return -ENXIO; + +#elif defined(IP7000) || defined(IP7000_REV2) + if ((gpio >= GPIO_RA_4) && (gpio <= GPIO_RA_6)) + return 44 + (gpio - GPIO_RA_4); + else + return -ENXIO; + +#else + return -ENXIO; + +#endif +} + +static inline int irq_to_gpio(unsigned gpio) +{ + return -ENXIO; +} + +extern struct ubicom32_io_port *ubi_gpio_get_port(unsigned gpio); + +extern int __init ubi_gpio_init(void); + +#endif /* _ASM_UBICOM32_GPIO_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/hardirq.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/hardirq.h new file mode 100644 index 0000000000..e230481a13 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/hardirq.h @@ -0,0 +1,55 @@ +/* + * arch/ubicom32/include/asm/hardirq.h + * Definition of ack_bad_irq() for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * Copyright (C) 1997, 98, 99, 2000, 01, 05 Ralf Baechle (ralf@linux-mips.org) + * Copyright (C) 1999, 2000 Silicon Graphics, Inc. + * Copyright (C) 2001 MIPS Technologies, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_HARDIRQ_H +#define _ASM_UBICOM32_HARDIRQ_H + +#include <linux/threads.h> +#include <linux/irq.h> + +/* + * The hardirq mask has to be large enough to have space + * for potentially all IRQ sources in the system nesting + * on a single CPU. For Ubicom32, we have 64 IRQ sources. + */ +#define HARDIRQ_BITS 6 +#if (1 << HARDIRQ_BITS) < NR_IRQS +# error HARDIRQ_BITS is too low! +#endif + +typedef struct { + unsigned int __softirq_pending; +} ____cacheline_aligned irq_cpustat_t; + +#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */ + +extern void ack_bad_irq(unsigned int irq); + +#endif /* _ASM_UBICOM32_HARDIRQ_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/hw_irq.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/hw_irq.h new file mode 100644 index 0000000000..9dece31086 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/hw_irq.h @@ -0,0 +1,31 @@ +/* + * arch/ubicom32/include/asm/hw_irq.h + * Ubicom32 architecture APIC support. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_HW_IRQ_H +#define _ASM_UBICOM32_HW_IRQ_H + +#endif /* _ASM_UBICOM32_HW_IRQ_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/io.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/io.h new file mode 100644 index 0000000000..ad526a3385 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/io.h @@ -0,0 +1,313 @@ +/* + * arch/ubicom32/include/asm/io.h + * I/O memory accessor functions for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_IO_H +#define _ASM_UBICOM32_IO_H + +#ifdef __KERNEL__ +#include <linux/string.h> +#include <linux/compiler.h> + +static inline unsigned short _swapw(volatile unsigned short v) +{ + return ((v << 8) | (v >> 8)); +} + +static inline unsigned int _swapl(volatile unsigned long v) +{ + return ((v << 24) | ((v & 0xff00) << 8) | ((v & 0xff0000) >> 8) | (v >> 24)); +} + +#ifndef CONFIG_PCI +#define readb(addr) \ + ({ unsigned char __v = (*(volatile unsigned char *) (addr)); __v; }) +#define readw(addr) \ + ({ unsigned short __v = (*(volatile unsigned short *) (addr)); __v; }) +#define readl(addr) \ + ({ unsigned int __v = (*(volatile unsigned int *) (addr)); __v; }) + +#define writeb(b,addr) (void)((*(volatile unsigned char *) (addr)) = (b)) +#define writew(b,addr) (void)((*(volatile unsigned short *) (addr)) = (b)) +#define writel(b,addr) (void)((*(volatile unsigned int *) (addr)) = (b)) +#else /*CONFIG_PCI */ + +#define PCI_CPU_REG_BASE (0x00000000UL) /* taking lower 2GB space */ +#define PCI_DEV_REG_BASE (0x80000000UL) + +#if PCI_CPU_REG_BASE > PCI_DEV_REG_BASE +#define IS_PCI_ADDRESS(x) (((unsigned int)(x)&(PCI_CPU_REG_BASE)) == 0) +#else +#define IS_PCI_ADDRESS(x) ((unsigned int)(x)&(PCI_DEV_REG_BASE)) +#endif + +extern unsigned int ubi32_pci_read_u32(const volatile void __iomem *addr); +extern unsigned short ubi32_pci_read_u16(const volatile void __iomem *addr); +extern unsigned char ubi32_pci_read_u8(const volatile void __iomem *addr); +extern void ubi32_pci_write_u32(unsigned int val, const volatile void __iomem *addr); +extern void ubi32_pci_write_u16(unsigned short val, const volatile void __iomem *addr); +extern void ubi32_pci_write_u8(unsigned char val, const volatile void __iomem *addr); + +static inline unsigned char readb(const volatile void __iomem *addr) +{ + if (IS_PCI_ADDRESS(addr)) + return ubi32_pci_read_u8(addr); + else + return (unsigned char)(*(volatile unsigned char *)addr); +} +static inline unsigned short readw(const volatile void __iomem *addr) +{ + if (IS_PCI_ADDRESS(addr)) + return ubi32_pci_read_u16(addr); + else + return (unsigned short)(*(volatile unsigned short *)addr); +} + +static inline unsigned int readl(const volatile void __iomem *addr) +{ + if (IS_PCI_ADDRESS(addr)) + return ubi32_pci_read_u32(addr); + else + return (unsigned int)(*(volatile unsigned int *)addr); +} + +static inline void writel(unsigned int val, volatile void __iomem *addr) +{ + if (IS_PCI_ADDRESS(addr)) + ubi32_pci_write_u32(val, addr); + else + *(volatile unsigned int *)addr = val; +} + +static inline void writew(unsigned short val, volatile void __iomem *addr) +{ + if (IS_PCI_ADDRESS(addr)) + ubi32_pci_write_u16(val, addr); + else + *(volatile unsigned short *)addr = val; +} + +static inline void writeb(unsigned char val, volatile void __iomem *addr) +{ + if (IS_PCI_ADDRESS(addr)) + ubi32_pci_write_u8(val, addr); + else + *(volatile unsigned char *)addr = val; +} +#endif + +#define readb_relaxed(addr) readb(addr) +#define readw_relaxed(addr) readw(addr) +#define readl_relaxed(addr) readl(addr) + + +#define __raw_readb readb +#define __raw_readw readw +#define __raw_readl readl +#define __raw_writeb writeb +#define __raw_writew writew +#define __raw_writel writel + +static inline void io_outsb(unsigned int addr, const void *buf, int len) +{ + volatile unsigned char *ap = (volatile unsigned char *) addr; + unsigned char *bp = (unsigned char *) buf; + while (len--) + *ap = *bp++; +} + +static inline void io_outsw(unsigned int addr, const void *buf, int len) +{ + volatile unsigned short *ap = (volatile unsigned short *) addr; + unsigned short *bp = (unsigned short *) buf; + while (len--) + *ap = _swapw(*bp++); +} + +static inline void io_outsl(unsigned int addr, const void *buf, int len) +{ + volatile unsigned int *ap = (volatile unsigned int *) addr; + unsigned int *bp = (unsigned int *) buf; + while (len--) + *ap = _swapl(*bp++); +} + +static inline void io_insb(unsigned int addr, void *buf, int len) +{ + volatile unsigned char *ap = (volatile unsigned char *) addr; + unsigned char *bp = (unsigned char *) buf; + while (len--) + *bp++ = *ap; +} + +static inline void io_insw(unsigned int addr, void *buf, int len) +{ + volatile unsigned short *ap = (volatile unsigned short *) addr; + unsigned short *bp = (unsigned short *) buf; + while (len--) + *bp++ = _swapw(*ap); +} + +static inline void io_insl(unsigned int addr, void *buf, int len) +{ + volatile unsigned int *ap = (volatile unsigned int *) addr; + unsigned int *bp = (unsigned int *) buf; + while (len--) + *bp++ = _swapl(*ap); +} + +#define mmiowb() + +/* + * make the short names macros so specific devices + * can override them as required + */ +#ifndef CONFIG_PCI +#define memset_io(a,b,c) memset((void *)(a),(b),(c)) +#define memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c)) +#define memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c)) +#else +extern void memcpy_fromio(void *to, const volatile void __iomem *from, unsigned len); +extern void memcpy_toio(volatile void __iomem *to, const void *from, unsigned len); +extern void memset_io(volatile void __iomem *addr, int val, size_t count); +#endif + +#define inb(addr) readb(addr) +#define inw(addr) readw(addr) +#define inl(addr) readl(addr) +#define outb(x,addr) ((void) writeb(x,addr)) +#define outw(x,addr) ((void) writew(x,addr)) +#define outl(x,addr) ((void) writel(x,addr)) + +#define inb_p(addr) inb(addr) +#define inw_p(addr) inw(addr) +#define inl_p(addr) inl(addr) +#define outb_p(x,addr) outb(x,addr) +#define outw_p(x,addr) outw(x,addr) +#define outl_p(x,addr) outl(x,addr) + +#define outsb(a,b,l) io_outsb(a,b,l) +#define outsw(a,b,l) io_outsw(a,b,l) +#define outsl(a,b,l) io_outsl(a,b,l) + +#define insb(a,b,l) io_insb(a,b,l) +#define insw(a,b,l) io_insw(a,b,l) +#define insl(a,b,l) io_insl(a,b,l) + +#ifndef CONFIG_PCI +#define ioread8_rep(a,d,c) insb(a,d,c) +#define ioread16_rep(a,d,c) insw(a,d,c) +#define ioread32_rep(a,d,c) insl(a,d,c) +#define iowrite8_rep(a,s,c) outsb(a,s,c) +#define iowrite16_rep(a,s,c) outsw(a,s,c) +#define iowrite32_rep(a,s,c) outsl(a,s,c) +#else +extern void ioread8_rep(void __iomem *port, void *buf, unsigned long count); +extern void ioread16_rep(void __iomem *port, void *buf, unsigned long count); +extern void ioread32_rep(void __iomem *port, void *buf, unsigned long count); +extern void iowrite8_rep(void __iomem *port, const void *buf, unsigned long count); +extern void iowrite16_rep(void __iomem *port, const void *buf, unsigned long count); +extern void iowrite32_rep(void __iomem *port, const void *buf, unsigned long count); +#endif + + +#ifndef CONFIG_PCI +#define ioread8(X) readb(X) +#define ioread16(X) readw(X) +#define ioread32(X) readl(X) +#define iowrite8(val,X) writeb(val,X) +#define iowrite16(val,X) writew(val,X) +#define iowrite32(val,X) writel(val,X) +#else /*CONFIG_PCI */ +extern unsigned char ioread8(void __iomem *addr); +extern unsigned short ioread16(void __iomem *addr); +extern unsigned int ioread32(void __iomem *addr); +extern void iowrite8(unsigned char val, void __iomem *addr); +extern void iowrite16(unsigned short val, void __iomem *addr); +extern void iowrite32(unsigned int val, void __iomem *addr); +#endif /* CONFIG_PCI */ + +#define IO_SPACE_LIMIT 0xffff + +/* Values for nocacheflag and cmode */ +#define IOMAP_FULL_CACHING 0 +#define IOMAP_NOCACHE_SER 1 +#define IOMAP_NOCACHE_NONSER 2 +#define IOMAP_WRITETHROUGH 3 + +extern void *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag); +extern void __iounmap(void *addr, unsigned long size); + +static inline void *ioremap(unsigned long physaddr, unsigned long size) +{ + return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); +} +static inline void *ioremap_nocache(unsigned long physaddr, unsigned long size) +{ + return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); +} +static inline void *ioremap_writethrough(unsigned long physaddr, unsigned long size) +{ + return __ioremap(physaddr, size, IOMAP_WRITETHROUGH); +} +static inline void *ioremap_fullcache(unsigned long physaddr, unsigned long size) +{ + return __ioremap(physaddr, size, IOMAP_FULL_CACHING); +} + +extern void iounmap(void *addr); + +#define ioport_map(port, nr) ((void __iomem*)(port)) +#define ioport_unmap(addr) + + +/* Pages to physical address... */ +#define page_to_phys(page) ((page - mem_map) << PAGE_SHIFT) +#define page_to_bus(page) ((page - mem_map) << PAGE_SHIFT) + +/* + * Macros used for converting between virtual and physical mappings. + */ +#define phys_to_virt(vaddr) ((void *) (vaddr)) +#define virt_to_phys(vaddr) ((unsigned long) (vaddr)) + +#define virt_to_bus virt_to_phys +#define bus_to_virt phys_to_virt + +/* + * Convert a physical pointer to a virtual kernel pointer for /dev/mem + * access + */ +#define xlate_dev_mem_ptr(p) __va(p) + +/* + * Convert a virtual cached pointer to an uncached pointer + */ +#define xlate_dev_kmem_ptr(p) p + +#endif /* __KERNEL__ */ + +#endif /* _ASM_UBICOM32_IO_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/ioctl.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/ioctl.h new file mode 100644 index 0000000000..10d8dd75fc --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/ioctl.h @@ -0,0 +1,33 @@ +/* + * arch/ubicom32/include/asm/ioctl.h + * Generic ioctl.h for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_IOCTL_H +#define _ASM_UBICOM32_IOCTL_H + +#include <asm-generic/ioctl.h> + +#endif /* _ASM_UBICOM32_IOCTL_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/ioctls.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/ioctls.h new file mode 100644 index 0000000000..c8e2c7901f --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/ioctls.h @@ -0,0 +1,111 @@ +/* + * arch/ubicom32/include/asm/ioctls.h + * Definitions of ioctls for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_IOCTLS_H +#define _ASM_UBICOM32_IOCTLS_H + +#include <asm/ioctl.h> + +/* 0x54 is just a magic number to make these relatively unique ('T') */ + +#define TCGETS 0x5401 +#define TCSETS 0x5402 +#define TCSETSW 0x5403 +#define TCSETSF 0x5404 +#define TCGETA 0x5405 +#define TCSETA 0x5406 +#define TCSETAW 0x5407 +#define TCSETAF 0x5408 +#define TCSBRK 0x5409 +#define TCXONC 0x540A +#define TCFLSH 0x540B +#define TIOCEXCL 0x540C +#define TIOCNXCL 0x540D +#define TIOCSCTTY 0x540E +#define TIOCGPGRP 0x540F +#define TIOCSPGRP 0x5410 +#define TIOCOUTQ 0x5411 +#define TIOCSTI 0x5412 +#define TIOCGWINSZ 0x5413 +#define TIOCSWINSZ 0x5414 +#define TIOCMGET 0x5415 +#define TIOCMBIS 0x5416 +#define TIOCMBIC 0x5417 +#define TIOCMSET 0x5418 +#define TIOCGSOFTCAR 0x5419 +#define TIOCSSOFTCAR 0x541A +#define FIONREAD 0x541B +#define TIOCINQ FIONREAD +#define TIOCLINUX 0x541C +#define TIOCCONS 0x541D +#define TIOCGSERIAL 0x541E +#define TIOCSSERIAL 0x541F +#define TIOCPKT 0x5420 +#define FIONBIO 0x5421 +#define TIOCNOTTY 0x5422 +#define TIOCSETD 0x5423 +#define TIOCGETD 0x5424 +#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */ +#define TIOCSBRK 0x5427 /* BSD compatibility */ +#define TIOCCBRK 0x5428 /* BSD compatibility */ +#define TIOCGSID 0x5429 /* Return the session ID of FD */ +#define TCGETS2 _IOR('T',0x2A, struct termios2) +#define TCSETS2 _IOW('T',0x2B, struct termios2) +#define TCSETSW2 _IOW('T',0x2C, struct termios2) +#define TCSETSF2 _IOW('T',0x2D, struct termios2) +#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ +#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ + +#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */ +#define FIOCLEX 0x5451 +#define FIOASYNC 0x5452 +#define TIOCSERCONFIG 0x5453 +#define TIOCSERGWILD 0x5454 +#define TIOCSERSWILD 0x5455 +#define TIOCGLCKTRMIOS 0x5456 +#define TIOCSLCKTRMIOS 0x5457 +#define TIOCSERGSTRUCT 0x5458 /* For debugging only */ +#define TIOCSERGETLSR 0x5459 /* Get line status register */ +#define TIOCSERGETMULTI 0x545A /* Get multiport config */ +#define TIOCSERSETMULTI 0x545B /* Set multiport config */ + +#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */ +#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ +#define FIOQSIZE 0x545E + +/* Used for packet mode */ +#define TIOCPKT_DATA 0 +#define TIOCPKT_FLUSHREAD 1 +#define TIOCPKT_FLUSHWRITE 2 +#define TIOCPKT_STOP 4 +#define TIOCPKT_START 8 +#define TIOCPKT_NOSTOP 16 +#define TIOCPKT_DOSTOP 32 + +#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ + +#endif /* _ASM_UBICOM32_IOCTLS_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/ip5000-asm.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/ip5000-asm.h new file mode 100644 index 0000000000..62929e49f5 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/ip5000-asm.h @@ -0,0 +1,156 @@ +/* + * arch/ubicom32/include/asm/ip5000-asm.h + * Instruction macros for the IP5000. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ + +#ifndef _ASM_UBICOM32_IP5000_ASM_H +#define _ASM_UBICOM32_IP5000_ASM_H + +#if !defined(__LINKER__) + +#if defined(__ASSEMBLY__) +.macro cycles quant +.if (\quant) == 1 + nop +.else +.if (((\quant) + 3) / 8) > 0 +.rept (((\quant) + 3) / 8) + jmpt.f .+4 +.endr +.endif +.if ((((\quant) + 3) % 8) / 4) > 0 + jmpt.t .+4 +.endif +.endif +.endm +#else +/* + * Same macro as above just in C inline asm + */ +asm (" \n\ +.macro cycles quant \n\ +.if (\\quant) == 1 \n\ + nop \n\ +.else \n\ +.if (((\\quant) + 3) / 8) > 0 \n\ +.rept (((\\quant) + 3) / 8) \n\ + jmpt.f .+4 \n\ +.endr \n\ +.endif \n\ +.if ((((\\quant) + 3) % 8) / 4) > 0 \n\ + jmpt.t .+4 \n\ +.endif \n\ +.endif \n\ +.endm \n\ +"); +#endif + + +#if defined(__ASSEMBLY__) +.macro pipe_flush cyc + cycles 11 - (\cyc) +.endm +#else +/* + * Same macro as above just in C inline asm + */ +asm (" \n\ +.macro pipe_flush cyc \n\ + cycles 11 - (\\cyc) \n\ +.endm \n\ +"); + +#endif + +#if defined(__ASSEMBLY__) +.macro setcsr_flush cyc + cycles 5 - (\cyc) +.endm +#else +/* + * Same macro as above just in C inline asm + */ +asm (" \n\ +.macro setcsr_flush cyc \n\ + cycles 5 - (\\cyc) \n\ +.endm \n\ +"); +#endif + +/* + * Macros for prefetch (using miss-aligned memory write) + */ +#if defined(__ASSEMBLY__) + +.macro pre_fetch_macro thread_num, Ascratch, Aaddress length + bclr MT_TRAP_EN, MT_TRAP_EN, #(\thread_num) + bset \Ascratch, \Aaddress, #0 ; force a miss-aligned address + jmpt.t .+4 ; delay for both address setup and trap disable + move.4 (\Ascratch), #0 + .if (\length > 32) + move.4 32(\Ascratch), #0 + .endif + .if (\length > 64) + move.4 64(\Ascratch), #0 + .endif + .if (\length > 96) + move.4 96(\Ascratch), #0 + .endif + .if (\length > 128) + invalid_instruction ; maximum pre-fetch size is 4 cache lines + .endif + bset MT_TRAP_EN, MT_TRAP_EN, #(\thread_num) +.endm + +#else +/* + * Same macro as above just in C inline asm + */ +asm (" \n\ +.macro pre_fetch_macro thread_num, Ascratch, Aaddress length \n\ + bclr MT_TRAP_EN, MT_TRAP_EN, #(\thread_num) \n\ + bset \\Ascratch, \\Aaddress, #0 ; force a miss-aligned address \n\ + jmpt.t .+4 ; delay for both address setup and trap disable \n\ + move.4 (\\Ascratch), #0 \n\ + .if (\\length > 32) \n\ + move.4 32(\\Ascratch), #0 \n\ + .endif \n\ + .if (\\length > 64) \n\ + move.4 64(\\Ascratch), #0 \n\ + .endif \n\ + .if (\\length > 96) \n\ + move.4 96(\\Ascratch), #0 \n\ + .endif \n\ + .if (\\length > 128) \n\ + invalid_instruction ; maximum pre-fetch size is 4 cache lines \n\ + .endif \n\ + bset MT_TRAP_EN, MT_TRAP_EN, #(\\thread_num) \n\ +.endm \n\ +"); +#endif + +#endif /* !defined(__LINKER__) */ +#endif /* defined _ASM_UBICOM32_IP5000_ASM_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/ip5000.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/ip5000.h new file mode 100644 index 0000000000..b616ebe5f0 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/ip5000.h @@ -0,0 +1,845 @@ +/* + * arch/ubicom32/include/asm/ip5000.h + * Specific details for the Ubicom IP5000 processor. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ + +#ifndef _ASM_UBICOM32_IP5000_H +#define _ASM_UBICOM32_IP5000_H + +#include <asm/memory_map.h> + +/* + * Inline assembly define + */ +#define S(arg) #arg +#define D(arg) S(arg) + +/* + * Assembler include file + */ +#include <asm/ip5000-asm.h> + +/* + * Timing + */ +#define JMPT_PENALTY 3 +#define JMPF_PENALTY 7 +#define RET_PENALTY 7 + +/* + * Threads + */ +#if defined(IP5000) || defined(IP5000_REV2) +#define THREAD_COUNT 10 +#elif defined(IP7000) || defined(IP7000_REV2) +#define THREAD_COUNT 12 +#else +#error "Unknown IP5K silicon" +#endif + +/* + * Arch + */ +#if defined(IP5000) || defined(IP5000_REV2) +#define UBICOM32_ARCH_VERSION 3 +#elif defined(IP7000) || defined(IP7000_REV2) +#define UBICOM32_ARCH_VERSION 4 +#else +#error "Unknown IP5K silicon" +#endif + + +/* + * Registers + */ +#define ROSR_INT (1 << 0) + +/* Interrupts */ +#define INT_CHIP(reg, bit) (((reg) << 5) | (bit)) +#define INT_REG(interrupt) (((interrupt) >> 5) * 4) +#define INT_SET(interrupt) 0x0114 + INT_REG(interrupt) +#define INT_CLR(interrupt) 0x0124 + INT_REG(interrupt) +#define INT_STAT(interrupt) 0x0104 + INT_REG(interrupt) +#define INT_MASK(interrupt) 0x00C0 + INT_REG(interrupt) +#define INT_BIT(interrupt) ((interrupt) & 0x1F) +#define INT_BIT_MASK(interrupt) (1 << INT_BIT(interrupt)) + +/* + * The LOCK_INT and THREAD_INT are used to wake up corresponding thread. They are sharing + * the same set of SW interrupt resource. + * + * LOCK_INT(n): One SW INT per NRT thread that can participate lock operation. + * The threads that can participate lock are application threads and DSR thread. + * (Lock locks - numbers are hard-coded in lock.h) + * THREAD_INT(n): One SW INT per HRT thread for wake up trigger. + */ +#define LOCK_INT(thread) INT_CHIP(0, (thread)) +#define THREAD_INT(thread) INT_CHIP(0, (thread)) + +/* + * The SYSTEM_INT and DSR_INT are sharing the same set of SW interrupt resource. + * + * SYSTEM_INT(n): One SW INT per NRT threads (application threads) as system queue interrupt, + * and for DSR as self-trigger interrupt. + * (The application threads include at least thread 0) + * DSR_INT(n): One SW INT per HRT thread to request DSR service. + */ +#define SYSTEM_INT(thread) INT_CHIP(0, THREAD_COUNT + (thread)) +#define DSR_INT(thread) INT_CHIP(0, THREAD_COUNT + (thread)) + +/* GLOBAL_CTRL */ +#define GLOBAL_CTRL_TRAP_RST_EN (1 << 9) +#define GLOBAL_CTRL_AERROR_RST_EN (1 << 8) +#define GLOBAL_CTRL_MT_MIN_DELAY(x) ((x) << 3) +#define GLOBAL_CTRL_HRT_BANK_SELECT (1 << 2) +#define GLOBAL_CTRL_INT_EN (1 << 0) + +/* + * HRT Tables + */ +#define HRT_TABLE0_BASE 0x0800 +#define HRT_TABLE1_BASE 0x0900 +#define HRT_TABLE_SIZE 64 + +/* + * Break Point Trap Register + */ +#define ASYNCERROR_INT INT_CHIP(0, 31) +#define BREAKPOINT_INT INT_CHIP(1, 31) + +/* + * Port interrupts + * The non-existing FIFO INTs are mapped to INT2 for the ports. + */ +#define IO_PORT_PTR_TO_NUM(port) (((port) & 0x0000ffff) >> 12) +#define RX_FIFO_INT(port) \ + ((IO_PORT_PTR_TO_NUM(port) == 0) ? INT_CHIP(0, 25) : \ + ((IO_PORT_PTR_TO_NUM(port) == 1) ? INT_CHIP(0, 26) : \ + ((IO_PORT_PTR_TO_NUM(port) == 2) ? INT_CHIP(0, 29) : \ + ((IO_PORT_PTR_TO_NUM(port) == 3) ? INT_CHIP(1, 24) : \ + ((IO_PORT_PTR_TO_NUM(port) == 4) ? INT_CHIP(1, 27) : \ + ((IO_PORT_PTR_TO_NUM(port) == 5) ? INT_CHIP(1, 16) : \ + ((IO_PORT_PTR_TO_NUM(port) == 6) ? INT_CHIP(1, 19) : \ + ((IO_PORT_PTR_TO_NUM(port) == 7) ? INT_CHIP(1, 20) : \ + ((IO_PORT_PTR_TO_NUM(port) == 8) ? INT_CHIP(1, 21) : \ + INT_CHIP(1, 15)))))))))) +#define TX_FIFO_INT(port) \ + ((IO_PORT_PTR_TO_NUM(port) == 0) ? INT_CHIP(0, 24) : \ + ((IO_PORT_PTR_TO_NUM(port) == 1) ? INT_CHIP(0, 27) : \ + ((IO_PORT_PTR_TO_NUM(port) == 2) ? INT_CHIP(0, 29) : \ + ((IO_PORT_PTR_TO_NUM(port) == 3) ? INT_CHIP(1, 25) : \ + ((IO_PORT_PTR_TO_NUM(port) == 4) ? INT_CHIP(1, 28) : \ + ((IO_PORT_PTR_TO_NUM(port) == 5) ? INT_CHIP(1, 17) : \ + ((IO_PORT_PTR_TO_NUM(port) == 6) ? INT_CHIP(1, 19) : \ + ((IO_PORT_PTR_TO_NUM(port) == 7) ? INT_CHIP(1, 20) : \ + ((IO_PORT_PTR_TO_NUM(port) == 8) ? INT_CHIP(1, 22) : \ + INT_CHIP(1, 15)))))))))) +#define PORT_OTHER_INT(port) \ + ((IO_PORT_PTR_TO_NUM(port) == 0) ? INT_CHIP(0, 25) : \ + ((IO_PORT_PTR_TO_NUM(port) == 1) ? INT_CHIP(0, 28) : \ + ((IO_PORT_PTR_TO_NUM(port) == 2) ? INT_CHIP(0, 29) : \ + ((IO_PORT_PTR_TO_NUM(port) == 3) ? INT_CHIP(1, 26) : \ + ((IO_PORT_PTR_TO_NUM(port) == 4) ? INT_CHIP(1, 29) : \ + ((IO_PORT_PTR_TO_NUM(port) == 5) ? INT_CHIP(1, 18) : \ + ((IO_PORT_PTR_TO_NUM(port) == 6) ? INT_CHIP(1, 19) : \ + ((IO_PORT_PTR_TO_NUM(port) == 7) ? INT_CHIP(1, 20) : \ + ((IO_PORT_PTR_TO_NUM(port) == 8) ? INT_CHIP(1, 23) : \ + INT_CHIP(1, 15)))))))))) + +/* + * On Chip Peripherals Base. + */ +#define OCP_BASE 0x01000000 +#define OCP_GENERAL 0x000 +#define OCP_TIMERS 0x100 +#define OCP_TRNG 0x200 /* True Random Number Generator Control Reigsters */ +#define OCP_DEBUG 0x300 +#define OCP_SECURITY 0x400 +#define OCP_ICCR 0x500 /* I-Cache Control Registers */ +#define OCP_DCCR 0x600 /* D-Cache Control Registers */ +#define OCP_OCMC 0x700 /* On Chip Memory Control Registers */ +#define OCP_STATISTICS 0x800 /* Statistics Counters */ +#define OCP_MTEST 0x900 /* Memory Test Registers */ +#define OCP_MCFG 0xa00 /* Memory Configuration Registers -- IP7000 only */ +#define OCP_DEBUG_INST 0x000 /* Up to 16M */ + +/* + * General Configuration Registers (PLL) + */ +#define GENERAL_CFG_BASE (OCP_BASE + OCP_GENERAL) +#define GEN_CLK_CORE_CFG 0x00 +#define GEN_CLK_IO_CFG 0x04 +#define GEN_CLK_DDR_CFG 0x08 +#define GEN_CLK_DDRDS_CFG 0x0c +#define GEN_CLK_SLIP_CLR 0x10 +#define GEN_CLK_SLIP_START 0x14 +#define GEN_CLK_SERDES_SEL 0x18 /* IP7000 only */ +#define GEN_CLK_DDR_CFG2 0x1c /* IP7000 only */ +#define GEN_DDR_CAL_CTRL 0x30 /* IP5000 only */ +#define GEN_DDR_CAL_STAT 0x34 /* IP5000 only */ +#define GEN_USB_DFT_CTRL 0x38 /* IP5000 only */ +#define GEN_USB_DFT_STAT 0x3c /* IP5000 only */ +#define GEN_USB_PHY_CFG 0x40 /* IP7000 only */ +#define GEN_USB_PHY_TEST 0x44 /* IP7000 only */ +#define GEN_USB_PHY_STAT 0x48 /* IP7000 only */ +#define GEN_SW_RESET 0x80 +#define GEN_RESET_REASON 0x84 +#define GEN_BOND_CFG 0x88 +#define GEN_IO_PU_CFG 0x8c +#define GEN_MEM_RM_CFG 0x90 +#define GEN_IO_CONFIG 0x94 + +#define GEN_CLK_PLL_SECURITY_BIT_NO 31 +#define GEN_CLK_PLL_SECURITY (1 << GEN_CLK_PLL_SECURITY_BIT_NO) +#define GEN_CLK_PLL_ENSAT (1 << 30) +#define GEN_CLK_PLL_FASTEN (1 << 29) +#define GEN_CLK_PLL_NR(v) (((v) - 1) << 23) +#define GEN_CLK_PLL_NF(v) (((v) - 1) << 11) +#define GEN_CLK_PLL_OD(v) (((v) - 1) << 8) +#define GEN_CLK_PLL_RESET (1 << 7) +#define GEN_CLK_PLL_BYPASS (1 << 6) +#define GEN_CLK_PLL_POWERDOWN (1 << 5) +#define GEN_CLK_PLL_SELECT (1 << 4) + +#define GEN_GET_CLK_PLL_NR(v) ((((v) >> 23) & 0x003f) + 1) +#define GEN_GET_CLK_PLL_NF(v) ((((v) >> 11) & 0x0fff) + 1) +#define GEN_GET_CLK_PLL_OD(v) ((((v) >> 8) & 0x7) + 1) + + +#define RESET_FLAG_DST_MEM_ERROR (1 << 18) +#define RESET_FLAG_SRC1_MEM_ERROR (1 << 17) +#define RESET_FLAG_WRITE_ADDR (1 << 16) +#define RESET_FLAG_DST_SYNC_ERROR (1 << 15) +#define RESET_FLAG_SRC1_SYNC_ERROR (1 << 14) +#define RESET_FLAG_DST_ALGN_ERROR (1 << 13) +#define RESET_FLAG_SRC1_ALGN_ERROR (1 << 12) +#define RESET_FLAG_DST_ADDR_ERROR (1 << 11) +#define RESET_FLAG_SRC1_ADDR_ERROR (1 << 10) +#define RESET_FLAG_ILLEGAL_INST (1 << 9) +#define RESET_FLAG_INST_SYNC_ERROR (1 << 8) +#define RESET_FLAG_INST_ADDR_ERROR (1 << 7) +#define RESET_FLAG_DATA_PORT_ERROR (1 << 6) +#define RESET_FLAG_INST_PORT_ERROR (1 << 5) +#define RESET_FLAG_SW_RESET (1 << 4) +#define RESET_FLAG_DEBUG (1 << 3) +#define RESET_FLAG_WATCHDOG (1 << 2) +#define RESET_FLAG_POWER_ON (1 << 1) +#define RESET_FLAG_EXTERNAL (1 << 0) + +/* + * Timer block + */ +#define TIMER_BASE (OCP_BASE + OCP_TIMERS) +#define TIMER_MPTVAL 0x00 +#define TIMER_RTCOM 0x04 +#define TIMER_TKEY 0x08 +#define TIMER_WDCOM 0x0c +#define TIMER_WDCFG 0x10 +#define TIMER_SYSVAL 0x14 +#define TIMER_SYSCOM(tmr) (0x18 + (tmr) * 4) +#define TIMER_TRN_CFG 0x100 +#define TIMER_TRN 0x104 + +#define TIMER_COUNT 10 +#define TIMER_INT(tmr) INT_CHIP(1, (tmr)) +#define TIMER_TKEYVAL 0xa1b2c3d4 +#define TIMER_WATCHDOG_DISABLE 0x4d3c2b1a +#define TIMER_TRN_CFG_ENABLE_OSC 0x00000007 + +#ifndef __ASSEMBLY__ +/* + * ubicom32_io_timer + */ +struct ubicom32_io_timer { + volatile u32_t mptval; + volatile u32_t rtcom; + volatile u32_t tkey; + volatile u32_t wdcom; + volatile u32_t wdcfg; + volatile u32_t sysval; + volatile u32_t syscom[TIMER_COUNT]; + volatile u32_t reserved[64 - 6 - TIMER_COUNT]; // skip all the way to OCP-TRNG section + volatile u32_t rsgcfg; + volatile u32_t trn; +}; + +#define UBICOM32_IO_TIMER ((struct ubicom32_io_timer *)TIMER_BASE) +#endif + +#define UBICOM32_VECTOR_TO_TIMER_INDEX(vector) (vector - TIMER_INT(0)) + +/* + * OCP-Debug Module (Mailbox) + */ +#define ISD_MAILBOX_BASE (OCP_BASE + OCP_DEBUG) +#define ISD_MAILBOX_IN 0x00 +#define ISD_MAILBOX_OUT 0x04 +#define ISD_MAILBOX_STATUS 0x08 + +#define ISD_MAILBOX_INT INT_CHIP(1, 30) + +#define ISD_MAILBOX_STATUS_IN_FULL (1 << 31) +#define ISD_MAILBOX_STATUS_IN_EMPTY (1 << 30) +#define ISD_MAILBOX_STATUS_OUT_FULL (1 << 29) +#define ISD_MAILBOX_STATUS_OUT_EMPTY (1 << 28) + +/* + * OCP-Security + */ +#define SECURITY_BASE (OCP_BASE + OCP_SECURITY) +#define SECURITY_BASE_EFFECTIVE_ADDRESS (SECURITY_BASE >> 7) // To load the base address in a single instruction +#define SECURITY_CTRL 0x00 +#define SECURITY_CTRL_BYTE_OFFSET(x) ((x) << 16) +#define SECURITY_CTRL_KEY_SIZE(x) ((x) << 8) +#define SECURITY_CTRL_HASH_ALG_NONE (0 << 4) +#define SECURITY_CTRL_HASH_ALG_MD5 (1 << 4) +#define SECURITY_CTRL_HASH_ALG_SHA1 (2 << 4) +#define SECURITY_CTRL_CBC (1 << 3) +#define SECURITY_CTRL_CIPHER_ALG_AES (0 << 1) +#define SECURITY_CTRL_CIPHER_ALG_NONE (1 << 1) +#define SECURITY_CTRL_CIPHER_ALG_DES (2 << 1) +#define SECURITY_CTRL_CIPHER_ALG_3DES (3 << 1) +#define SECURITY_CTRL_ENCIPHER (1 << 0) +#define SECURITY_CTRL_DECIPHER (0 << 0) +#define SECURITY_STAT 0x04 +#define SECURITY_STAT_BUSY (1 << 0) +#define SECURITY_KEY_VALUE(x) (0x10 + (x) * 4) +#define SECURITY_KEY_IN(x) (0x30 + (x) * 4) +#define SECURITY_KEY_OUT(x) (0x50 + (x) * 4) +#define SECURITY_KEY_HASH(x) (0x70 + (x) * 4) + +/* + * OCP-ICCR + */ +#define ICCR_BASE (OCP_BASE + OCP_ICCR) +#define ICACHE_TOTAL_SIZE 16384 /* in bytes */ + +/* + * OCP-DCCR + */ +#define DCCR_BASE (OCP_BASE + OCP_DCCR) +#if defined(IP5000) || defined(IP5000_REV2) +#define DCACHE_TOTAL_SIZE 8192 /* in bytes */ +#elif defined(IP7000) || defined(IP7000_REV2) +#define DCACHE_TOTAL_SIZE 16384 /* in bytes */ +#endif + +#if defined(IP5000) || defined(IP5000_REV2) || defined(IP7000) || defined(IP7000_REV2) +#define DCACHE_WRITE_QUEUE_LENGTH 6 +#else +#error "Unknown IP5K silicon" +#endif + +#define CACHE_LINE_SIZE 32 /* in bytes */ + +#define CCR_ADDR 0x00 +#define CCR_RDD 0x04 +#define CCR_WRD 0x08 +#define CCR_STAT 0x0c +#define CCR_CTRL 0x10 + +#define CCR_STAT_MCBE 0 +#define CCR_STAT_WIDEL 1 /* D-cache only */ + +#define CCR_CTRL_DONE 0 +#define CCR_CTRL_RESET 2 +#define CCR_CTRL_VALID 3 +#define CCR_CTRL_RD_DATA (1 << 4) +#define CCR_CTRL_RD_TAG (2 << 4) +#define CCR_CTRL_WR_DATA (3 << 4) +#define CCR_CTRL_WR_TAG (4 << 4) +#define CCR_CTRL_INV_INDEX (5 << 4) +#define CCR_CTRL_INV_ADDR (6 << 4) +#define CCR_CTRL_FLUSH_INDEX (7 << 4) /* D-cache only */ +#define CCR_CTRL_FLUSH_INV_INDEX (8 << 4) /* D-cache only */ +#define CCR_CTRL_FLUSH_ADDR (9 << 4) /* D-cache only */ +#define CCR_CTRL_FLUSH_INV_ADDR (10 << 4) /* D-cache only */ + +/* + * OCP-OCMC + */ +#define OCMC_BASE (OCP_BASE + OCP_OCMC) +#define OCMC_BANK_MASK 0x00 +#define OCMC_BIST_CNTL 0x04 /* IP5000 only */ +#define OCMC_BIST_STAT 0x08 /* IP5000 only */ + +#define OCMC_BANK_PROG(n) ((1<<(n))-1) + +#define OCMC_BIST_WRCK (1 << 7) +#define OCMC_BIST_RESET (1 << 5) +#define OCMC_BIST_SMART (1 << 4) +#define OCMC_BIST_RUN (1 << 3) +#define OCMC_BIST_REPAIR (1 << 2) + +#define OCMC_BIST_READY (1 << 3) +#define OCMC_BIST_FAIL (1 << 2) + +/* + * OCP-STATISTICS + */ +#define STATISTICS_BASE (OCP_BASE + OCP_STATISTICS) +#define STAT_COUNTER_CTRL(n) ((n)*8) +#define STAT_COUNTER(n) ((n)*8 + 4) + +#define STAT_EVENT_MP_INST 0 +#define STAT_EVENT_OCM_ACCESS 4 +#define STAT_EVENT_OCM_REQ 5 +#define STAT_EVENT_IC_REQ_INVAL 13 +#define STAT_EVENT_IC_MISS_INVAL 14 +#define STAT_EVENT_IC_REQ_INVAL_NACK 15 +#define STAT_EVENT_IC_REQ_VAL 16 +#define STAT_EVENT_IC_MISS_VAL 17 +#define STAT_EVENT_IC_REQ_VAL_NACK 18 +#define STAT_EVENT_IC_MISS_Q 19 +#define STAT_EVENT_DC_RD_REQ 20 +#define STAT_EVENT_DC_RD_MISS 21 +#define STAT_EVENT_DC_WR_REQ 22 +#define STAT_EVENT_DC_WR_MISS 23 +#define STAT_EVENT_DC_MISS_Q 24 +#define STAT_EVENT_DC_WB_FULL 25 +#define STAT_EVENT_DC_REQ_NACK 26 +#define STAT_EVENT_DC_CORE_REQ 27 +#define STAT_EVENT_DC_MISS 28 +#define STAT_EVENT_DC_EVICT 29 +#define STAT_EVENT_TRUE 30 +#define STAT_EVENT_FALSE 31 + +/* + * OCP_MTEST + */ +#define MTEST_BASE (OCP_BASE + OCP_MTEST) +#define MTEST_ADDR 0x00 +#define MTEST_WR 0x04 +#define MTEST_RD 0x08 +#define MTEST_CTRL 0x0c + +/* + * OCP_MCFG (IP7000 only) + */ +#define MCFG_BASE (OCP_BASE + OCP_MCFG) +#define MCFG_CTRL 0x00 +#define MCFG_WCFG 0x04 +#define MCFG_RCFG 0x08 + +/* + * Port registers + */ +#define IO_BASE 0x02000000 +#define RA (IO_BASE + 0x00000000) +#define RB (IO_BASE + 0x00001000) +#define RC (IO_BASE + 0x00002000) +#define RD (IO_BASE + 0x00003000) +#define RE (IO_BASE + 0x00004000) +#define RF (IO_BASE + 0x00005000) +#define RG (IO_BASE + 0x00006000) +#define RH (IO_BASE + 0x00007000) +#define RI (IO_BASE + 0x00008000) +#define RJ (IO_BASE + 0x00009000) +#define RLATCH (IO_BASE + 0x00ff0000) // For latched output only +#define IO_PORT_BR_OFFSET 0x00000800 + +/* + * General I/O Register Map (per port) + */ +#define IO_FUNC 0x00 +#define IO_GPIO_CTL 0x04 +#define IO_GPIO_OUT 0x08 +#define IO_GPIO_IN 0x0C +#define IO_INT_STATUS 0x10 +#define IO_INT_MASK 0x14 +#define IO_INT_SET 0x18 +#define IO_INT_CLR 0x1C +#define IO_TX_FIFO 0x20 +#define IO_TX_FIFO_HI 0x24 +#define IO_RX_FIFO 0x28 +#define IO_RX_FIFO_HI 0x2c +#define IO_CTL0 0x30 +#define IO_CTL1 0x34 +#define IO_CTL2 0x38 +#define IO_STATUS0 0x3c +#define IO_STATUS1 0x40 +#define IO_STATUS2 0x44 +#define IO_FIFO_WATER 0x48 +#define IO_FIFO_LEVEL 0x4c +#define IO_GPIO_MASK 0x50 + +#define IO_FUNC_FUNCTION_RESET(func) ((1 << ((func) - 1)) << 4) /* Function 0 doesn't need reset */ +#define IO_FUNC_RX_FIFO (1 << 3) +#define IO_FUNC_SELECT(func) ((func) << 0) + +/* + * External interrupt pins. + */ +#define EXT_INT_IO_BIT(pin) ((pin) + 5) // Interrupt pin number -> I/O INT bit +#define EXT_INT_RISING_EDGE(pin) (0x2 << (2*(pin) + 7)) +#define EXT_INT_FALLING_EDGE(pin) (0x1 << (2*(pin) + 7)) + +/* + * Flash + */ +#define IO_XFL_BASE RA + +#define IO_XFL_INT_START (1 << 16) +#define IO_XFL_INT_ERR (1 << 8) +#define IO_XFL_INT_DONE (1 << 0) + +#define IO_XFL_CTL0_MASK (0xffe07fff) +#define IO_XFL_CTL0_RD_CMD(cmd) (((cmd) & 0xff) << 24) +#define IO_XFL_CTL0_RD_DUMMY(n) (((n) & 0x7) << 21) +#define IO_XFL_CTL0_CLK_WIDTH(core_cycles) ((((core_cycles) + 1) & 0x7e) << 8) /* must be even number */ +#define IO_XFL_CTL0_CE_WAIT(spi_cycles) (((spi_cycles) & 0x3f) << 2) +#define IO_XFL_CTL0_MCB_LOCK (1 << 1) +#define IO_XFL_CTL0_ENABLE (1 << 0) +#define IO_XFL_CTL0_FAST_VALUE(div, wait) (IO_XFL_CTL0_RD_CMD(0xb) | IO_XFL_CTL0_RD_DUMMY(1) | IO_XFL_CTL0_CLK_WIDTH(div) | IO_XFL_CTL0_CE_WAIT(wait) | IO_XFL_CTL0_ENABLE) +#define IO_XFL_CTL0_VALUE(div, wait) (IO_XFL_CTL0_RD_CMD(3) | IO_XFL_CTL0_CLK_WIDTH(div) | IO_XFL_CTL0_CE_WAIT(wait) | IO_XFL_CTL0_ENABLE) + +#define IO_XFL_CTL1_MASK (0xc0003fff) +#define IO_XFL_CTL1_FC_INST(inst) (((inst) & 0x3) << 30) +#define IO_XFL_CTL1_FC_DATA(n) (((n) & 0x3ff) << 4) +#define IO_XFL_CTL1_FC_DUMMY(n) (((n) & 0x7) << 1) +#define IO_XFL_CTL1_FC_ADDR (1 << 0) + +#define IO_XFL_CTL2_FC_CMD(cmd) (((cmd) & 0xff) << 24) +#define IO_XFL_CTL2_FC_ADDR(addr) ((addr) & 0x00ffffff) /* Only up to 24 bits */ + +#define IO_XFL_STATUS0_MCB_ACTIVE (1 << 0) +#define IO_XFL_STATUS0_IOPCS_ACTIVE (1 << 1) + +/* + * SDRAM + */ +#define IO_SDRAM_DATA_BASE RG +#define IO_SDRAM_CNTL_BASE RH + +#define IO_SDRAM_CTRL0_EN_REF (1 << 0) + +/* + * Port function code (common fucntion codes for all I/O ports) + */ +#define IO_PORTX_FUNC_GPIO 0x00 +#define IO_PORTX_FUNC_XFL 0x01 +#define IO_PORTX_FUNC_PCI 0x01 +#define IO_PORTX_FUNC_SERDES 0x01 +#define IO_PORTX_FUNC_GMII 0x01 +#define IO_PORTX_FUNC_DDR 0x01 +#define IO_PORTX_FUNC_PCIX 0x01 +#define IO_PORTX_FUNC_USB2_0 0x01 +#define IO_PORTX_FUNC_GPIO_INT_CLK 0x02 +#define IO_PORTX_FUNC_PLIO 0x02 +#define IO_PORTX_FUNC_GPIO_INT 0x03 +#define IO_PORTX_FUNC_MII 0x03 + +/* + * Port 0 + */ +#define IO_PORT0_FUNC_GPIO IO_PORTX_FUNC_GPIO +#define IO_PORT0_FUNC_XFL_INT_CLK IO_PORTX_FUNC_XFL // Default mode after reset +#define IO_PORT0_FUNC_GPIO_INT_CLK IO_PORTX_FUNC_GPIO_INT_CLK +#define IO_PORT0_FUNC_GPIO_INT IO_PORTX_FUNC_GPIO_INT + +/* + * Port 1 + */ +#define IO_PORT1_FUNC_GPIO IO_PORTX_FUNC_GPIO +#define IO_PORT1_FUNC_PCI IO_PORTX_FUNC_PCI // PCI control +#define IO_PORT1_FUNC_MII IO_PORTX_FUNC_MII // port 4 MII extension + +/* + * Port 2 + */ +#define IO_PORT2_FUNC_GPIO IO_PORTX_FUNC_GPIO +#define IO_PORT2_FUNC_PCI IO_PORTX_FUNC_PCI // PCI data I/O +#define IO_PORT2_FUNC_PLIO IO_PORTX_FUNC_PLIO // Extended LM + +/* + * Port 3 + */ +#define IO_PORT3_FUNC_GPIO IO_PORTX_FUNC_GPIO +#define IO_PORT3_FUNC_SERDES IO_PORTX_FUNC_SERDES +#define IO_PORT3_FUNC_PLIO IO_PORTX_FUNC_PLIO + +/* + * Port 4 + */ +#define IO_PORT4_FUNC_GPIO IO_PORTX_FUNC_GPIO +#define IO_PORT4_FUNC_SERDES IO_PORTX_FUNC_SERDES +#define IO_PORT4_FUNC_PLIO IO_PORTX_FUNC_PLIO // Extended LM +#define IO_PORT4_FUNC_MII IO_PORTX_FUNC_MII + +/* + * Port 5 + */ +#define IO_PORT5_FUNC_GPIO IO_PORTX_FUNC_GPIO +#define IO_PORT5_FUNC_GMII IO_PORTX_FUNC_GMII + +/* + * Port 6 + */ +#define IO_PORT6_FUNC_GPIO IO_PORTX_FUNC_GPIO +#define IO_PORT6_FUNC_DDR IO_PORTX_FUNC_DDR + +/* + * Port 7 + */ +#define IO_PORT7_FUNC_GPIO IO_PORTX_FUNC_GPIO +#define IO_PORT7_FUNC_DDR IO_PORTX_FUNC_DDR + +/* + * Port 8 + */ +#define IO_PORT8_FUNC_GPIO IO_PORTX_FUNC_GPIO +#define IO_PORT8_FUNC_PCIX IO_PORTX_FUNC_PCIX +#define IO_PORT8_FUNC_PLIO IO_PORTX_FUNC_PLIO // Extended LM +#define IO_PORT8_FUNC_MII IO_PORTX_FUNC_MII // port 4 MII extension + +/* + * Port 9 + */ +#define IO_PORT9_FUNC_USB2_0 IO_PORTX_FUNC_USB2_0 + +/* + * FIFO + */ +#define IO_PORTX_INT_FIFO_TX_RESET (1 << 31) +#define IO_PORTX_INT_FIFO_RX_RESET (1 << 30) +#define IO_PORTX_INT_FIFO_TX_UF (1 << 15) +#define IO_PORTX_INT_FIFO_TX_WM (1 << 14) +#define IO_PORTX_INT_FIFO_RX_OF (1 << 13) +#define IO_PORTX_INT_FIFO_RX_WM (1 << 12) + +#define IO_PORTX_FUNC_FIFO_TX_WM(n) ((n) << 16) +#define IO_PORTX_FUNC_FIFO_RX_WM(n) ((n) << 0) + +/* + * MII + */ +#define IO_PORTX_INT_MII_TX_ERR_SEND (1 << 18) +#define IO_PORTX_INT_MII_TX_HALT (1 << 17) +#define IO_PORTX_INT_MII_TX_START (1 << 16) +#define IO_PORTX_INT_MII_THRESHOLD (1 << 8) +#define IO_PORTX_INT_MII_RX_EOP (1 << 7) +#define IO_PORTX_INT_MII_RX_SFD (1 << 6) +#define IO_PORTX_INT_MII_RX_ERR (1 << 5) +#define IO_PORTX_INT_MII_TX_EOP (1 << 4) +#define IO_PORTX_INT_MII_COL (1 << 3) +#define IO_PORTX_INT_MII_CRS (1 << 2) +#define IO_PORTX_INT_MII_ODD_NIB_ERR (1 << 1) +#define IO_PORTX_INT_MII_FALSE_CARRIER (1 << 0) + +/* + * SerDes + */ +#define IO_PORTX_INT_SERDES_TXBUF_VALID (1 << 16) +#define IO_PORTX_INT_SERDES_RXERR (1 << 7) +#define IO_PORTX_INT_SERDES_RXEOP (1 << 6) +#define IO_PORTX_INT_SERDES_SYND (1 << 5) +#define IO_PORTX_INT_SERDES_TXBE (1 << 4) +#define IO_PORTX_INT_SERDES_TXEOP (1 << 3) +#define IO_PORTX_INT_SERDES_SXLP (1 << 2) +#define IO_PORTX_INT_SERDES_RXBF (1 << 1) +#define IO_PORTX_INT_SERDES_RXCRS (1 << 0) + +#ifndef __ASSEMBLY__ +struct ubicom32_io_port { + volatile u32_t function; + volatile u32_t gpio_ctl; + volatile u32_t gpio_out; + volatile u32_t gpio_in; + volatile u32_t int_status; + volatile u32_t int_mask; + volatile u32_t int_set; + volatile u32_t int_clr; + volatile u32_t tx_fifo; + volatile u32_t tx_fifo_hi; + volatile u32_t rx_fifo; + volatile u32_t rx_fifo_hi; + volatile u32_t ctl0; + volatile u32_t ctl1; + volatile u32_t ctl2; + volatile u32_t status0; + volatile u32_t status1; + volatile u32_t status2; + volatile u32_t fifo_watermark; + volatile u32_t fifo_level; + volatile u32_t gpio_mask; +}; + +#define UBICOM32_IO_PORT(port) ((struct ubicom32_io_port *)((port))) +#endif + +#ifndef __ASSEMBLY__ +/* + * ubicom32_set_interrupt() + */ +extern inline void ubicom32_set_interrupt(u8_t interrupt) +{ + u32_t ibit = INT_BIT_MASK(interrupt); + + if (INT_REG(interrupt) == INT_REG(INT_CHIP(0, 0))) { + asm volatile ( + "move.4 "D(INT_SET(INT_CHIP(0, 0)))", %0\n\t" + : + : "r" (ibit) + ); + + return; + } + + asm volatile ( + "move.4 "D(INT_SET(INT_CHIP(1, 0)))", %0\n\t" + : + : "r" (ibit) + ); +} + +/* + * ubicom32_clear_interrupt() + */ +extern inline void ubicom32_clear_interrupt(u8_t interrupt) +{ + u32_t ibit = INT_BIT_MASK(interrupt); + + if (INT_REG(interrupt) == INT_REG(INT_CHIP(0, 0))) { + asm volatile ( + "move.4 "D(INT_CLR(INT_CHIP(0, 0)))", %0\n\t" + : + : "r" (ibit) + ); + + return; + } + + asm volatile ( + "move.4 "D(INT_CLR(INT_CHIP(1, 0)))", %0\n\t" + : + : "r" (ibit) + ); +} + +/* + * ubicom32_enable_interrupt() + */ +extern inline void ubicom32_enable_interrupt(u8_t interrupt) +{ + u32_t ibit = INT_BIT_MASK(interrupt); + + if (INT_REG(interrupt) == INT_REG(INT_CHIP(0, 0))) { + asm volatile ( + "or.4 "D(INT_MASK(INT_CHIP(0, 0)))", "D(INT_MASK(INT_CHIP(0, 0)))", %0\n\t" + : + : "d" (ibit) + ); + + return; + } + + asm volatile ( + "or.4 "D(INT_MASK(INT_CHIP(1, 0)))", "D(INT_MASK(INT_CHIP(1, 0)))", %0\n\t" + : + : "d" (ibit) + ); +} + +/* + * ubicom32_disable_interrupt() + */ +extern inline void ubicom32_disable_interrupt(u8_t interrupt) +{ + u32_t ibit = ~INT_BIT_MASK(interrupt); + + if (INT_REG(interrupt) == INT_REG(INT_CHIP(0, 0))) { + asm volatile ( + "and.4 "D(INT_MASK(INT_CHIP(0, 0)))", "D(INT_MASK(INT_CHIP(0, 0)))", %0\n\t" + : + : "d" (ibit) + ); + + return; + } + + asm volatile ( + "and.4 "D(INT_MASK(INT_CHIP(1, 0)))", "D(INT_MASK(INT_CHIP(1, 0)))", %0\n\t" + : + : "d" (ibit) + ); +} + +/* + * ubicom32_enable_global_interrupts() + */ +extern inline void ubicom32_enable_global_interrupts(void) +{ + asm volatile( + "bset GLOBAL_CTRL, GLOBAL_CTRL, #%bit("D(GLOBAL_CTRL_INT_EN)")" + ); +} + +/* + * ubicom32_disable_global_interrupts() + */ +extern inline void ubicom32_disable_global_interrupts(void) +{ + asm volatile( + "bclr GLOBAL_CTRL, GLOBAL_CTRL, #%bit("D(GLOBAL_CTRL_INT_EN)")" + ); +} + +/* + * ubicom32_get_reset_reason() + */ +extern inline u32_t ubicom32_get_reset_reason(void) +{ + return *(u32_t *)(GENERAL_CFG_BASE + GEN_RESET_REASON); +} + +/* + * ubicom32_read_reg() + */ +extern inline u32_t ubicom32_read_reg(volatile void *reg) +{ + u32_t v; + asm volatile ( + "move.4 %[dest], %[src] \n\t" + : [dest] "=r" (v) + : [src] "m" (*(u32_t *)reg) + ); + return v; +} + +/* + * ubicom32_write_reg() + */ +extern inline void ubicom32_write_reg(volatile void *reg, u32_t v) +{ + asm volatile ( + "move.4 %[dest], %[src] \n\t" + : + : [src] "r" (v), [dest] "m" (*(u32_t *)reg) + ); +} + +#endif /* __ASSEMBLY__ */ +#endif /* _ASM_UBICOM32_IP5000_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/ipcbuf.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/ipcbuf.h new file mode 100644 index 0000000000..76acafb20b --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/ipcbuf.h @@ -0,0 +1,55 @@ +/* + * arch/ubicom32/include/asm/ipcbuf.h + * Definition of ipc64_perm struct for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_IPCBUF_H +#define _ASM_UBICOM32_IPCBUF_H + +/* + * The user_ipc_perm structure for m68k architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 32-bit mode_t and seq + * - 2 miscellaneous 32-bit values + */ +struct ipc64_perm +{ + __kernel_key_t key; + __kernel_uid32_t uid; + __kernel_gid32_t gid; + __kernel_uid32_t cuid; + __kernel_gid32_t cgid; + __kernel_mode_t mode; + unsigned short __pad1; + unsigned short seq; + unsigned short __pad2; + unsigned long __unused1; + unsigned long __unused2; +}; + +#endif /* _ASM_UBICOM32_IPCBUF_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/irq.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/irq.h new file mode 100644 index 0000000000..b5525894e3 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/irq.h @@ -0,0 +1,45 @@ +/* + * arch/ubicom32/include/asm/irq.h + * IRQ definitions for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_IRQ_H +#define _ASM_UBICOM32_IRQ_H + +#include <asm/irqflags.h> + +/* + * We setup the IRQS to cover the full range of interrupt registers in + * processor. + */ +#define NR_IRQS 64 + +#define irq_canonicalize(irq) (irq) + +extern int irq_soft_alloc(unsigned int *soft); +extern void ack_bad_irq(unsigned int irq); +extern void do_IRQ(int irq, struct pt_regs *fp); + +#endif /* _ASM_UBICOM32_IRQ_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/irq_regs.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/irq_regs.h new file mode 100644 index 0000000000..afc33e40ee --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/irq_regs.h @@ -0,0 +1,33 @@ +/* + * arch/ubicom32/include/asm/irq_regs.h + * Generic irq_regs.h for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_IRQ_REGS_H +#define _ASM_UBICOM32_IRQ_REGS_H + +#include <asm-generic/irq_regs.h> + +#endif /* _ASM_UBICOM32_IRQ_REGS_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/irqflags.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/irqflags.h new file mode 100644 index 0000000000..f40906e5a7 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/irqflags.h @@ -0,0 +1,96 @@ +/* + * arch/ubicom32/include/asm/irqflags.h + * Raw implementation of local IRQ functions. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_IRQFLAGS_H +#define _ASM_UBICOM32_IRQFLAGS_H + +#include <linux/thread_info.h> +#include <asm/ubicom32-common.h> +#if defined(CONFIG_SMP) +#include <asm/smp.h> +#endif +#include <asm/ldsr.h> + +#if defined(CONFIG_PREEMPT) +#error Not supported by Ubicom32 irq handling, yet! +#endif + +/* + * raw_local_irq_enable() + * Enable interrupts for this thread. + */ +static inline void raw_local_irq_enable(void) +{ + ldsr_local_irq_enable(); +} + +/* + * raw_local_irq_disable() + * Disable interrupts for this thread. + */ +static inline void raw_local_irq_disable(void) +{ + ldsr_local_irq_disable(); +} + +/* + * raw_local_save_flags() + * Get the current IRQ state. + */ +#define raw_local_save_flags(flags) \ +do { \ + (flags) = ldsr_local_irq_is_disabled(); \ +} while (0) + +/* + * raw_local_irq_save() + * Save the current interrupt state and disable interrupts. + */ +#define raw_local_irq_save(flags) \ +do { \ + (flags) = ldsr_local_irq_save(); \ +} while (0) + +/* + * raw_local_irq_restore() + * Restore the IRQ state back to flags. + */ +static inline void raw_local_irq_restore(unsigned long flags) +{ + ldsr_local_irq_restore(flags); +} + +/* + * raw_irqs_disabled_flags() + * Return true if the flags indicate that IRQ(s) are disabled. + */ +static inline int raw_irqs_disabled_flags(unsigned long flags) +{ + return (flags); +} + +#endif /* _ASM_UBICOM32_IRQFLAGS_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/kdebug.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/kdebug.h new file mode 100644 index 0000000000..514bd27654 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/kdebug.h @@ -0,0 +1,33 @@ +/* + * arch/ubicom32/include/asm/kdebug.h + * Generic kdebug.h for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_KDEBUG_H +#define _ASM_UBICOM32_KDEBUG_H + +#include <asm-generic/kdebug.h> + +#endif /* _ASM_UBICOM32_KDEBUG_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/kmap_types.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/kmap_types.h new file mode 100644 index 0000000000..5f4ffeacbb --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/kmap_types.h @@ -0,0 +1,48 @@ +/* + * arch/ubicom32/include/asm/kmap_types.h + * Definition of km_type's for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_KMAP_TYPES_H +#define _ASM_UBICOM32_KMAP_TYPES_H + +enum km_type { + KM_BOUNCE_READ, + KM_SKB_SUNRPC_DATA, + KM_SKB_DATA_SOFTIRQ, + KM_USER0, + KM_USER1, + KM_BIO_SRC_IRQ, + KM_BIO_DST_IRQ, + KM_PTE0, + KM_PTE1, + KM_IRQ0, + KM_IRQ1, + KM_SOFTIRQ0, + KM_SOFTIRQ1, + KM_TYPE_NR +}; + +#endif /* _ASM_UBICOM32_KMAP_TYPES_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/ldsr.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/ldsr.h new file mode 100644 index 0000000000..b829c8790b --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/ldsr.h @@ -0,0 +1,186 @@ +/* + * arch/ubicom32/include/asm/ldsr.h + * Ubicom32 LDSR interface definitions. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_LDSR_H +#define _ASM_UBICOM32_LDSR_H + +#include <asm/ubicom32-common.h> +#include <asm/types.h> +#include <asm/thread.h> + +extern unsigned int ldsr_soft_irq_mask; + +/* + * ldsr_local_irq_is_disabled() + * Test if interrupts are disabled for this thread? + */ +static inline int ldsr_local_irq_is_disabled(void) +{ + int ret; + thread_t self = thread_get_self(); + unsigned int mask = (1 << self); + + asm volatile ( + " and.4 %0, scratchpad1, %1 \n\t" + : "=r" (ret) + : "d" (mask) + : "cc" + ); + + /* + * We return a simple 1 == disabled, 0 == enabled + * losing which tid this is for, because Linux + * can restore interrupts on a different thread. + */ + return ret >> self; +} + +/* + * ldsr_local_irq_save() + * Get the current interrupt state and disable interrupts. + */ +static inline unsigned int ldsr_local_irq_save(void) +{ + int ret; + thread_t self = thread_get_self(); + unsigned int mask = (1 << self); + + /* + * Ensure the compiler can not optimize out the code + * (volatile) and that it does not "cache" values around + * the interrupt state change (memory). This ensures + * that interrupt changes are treated as a critical + * section. + */ + asm volatile ( + " and.4 %0, scratchpad1, %1 \n\t" + " or.4 scratchpad1, scratchpad1, %1 \n\t" + : "=&r" (ret) + : "d" (mask) + : "cc", "memory" + ); + + /* + * We return a simple 1 == disabled, 0 == enabled + * losing which tid this is for, because Linux + * can restore interrupts on a different thread. + */ + return ret >> self; +} + +/* + * ldsr_local_irq_restore() + * Restore this cpu's interrupt enable/disable state. + * + * Note: flags is either 0 or 1. + */ +static inline void ldsr_local_irq_restore(unsigned int flags) +{ + unsigned int temp; + thread_t self = thread_get_self(); + unsigned int mask = (1 << self); + flags = (flags << self); + + /* + * Ensure the compiler can not optimize out the code + * (volatile) and that it does not "cache" values around + * the interrupt state change (memory). This ensures + * that interrupt changes are treated as a critical + * section. + * + * Atomic change to our bit in scratchpad1 without + * causing any temporary glitch in the value and + * without effecting other values. Also this uses + * no branches so no penalties. + */ + asm volatile ( + " xor.4 %0, scratchpad1, %1 \n\t" + " and.4 %0, %2, %0 \n\t" + " xor.4 scratchpad1, scratchpad1, %0 \n\t" + " move.4 int_set0, %3 \n\t" + : "=&d"(temp) + : "d"(flags), "r"(mask), "r"(ldsr_soft_irq_mask) + : "cc", "memory" + ); +} + +/* + * ldsr_local_irq_disable_interrupt() + * Disable ints for this thread. + */ +static inline void ldsr_local_irq_disable(void) +{ + unsigned int mask = (1 << thread_get_self()); + + /* + * Ensure the compiler can not optimize out the code + * (volatile) and that it does not "cache" values around + * the interrupt state change (memory). This ensures + * that interrupt changes are treated as a critical + * section. + */ + asm volatile ( + " or.4 scratchpad1, scratchpad1, %0 \n\t" + : + : "d" (mask) + : "cc", "memory" + ); +} + +/* + * ldsr_local_irq_enable_interrupt + * Enable ints for this thread. + */ +static inline void ldsr_local_irq_enable(void) +{ + unsigned int mask = (1 << thread_get_self()); + + /* + * Ensure the compiler can not optimize out the code + * (volatile) and that it does not "cache" values around + * the interrupt state change (memory). This ensures + * that interrupt changes are treated as a critical + * section. + */ + asm volatile ( + " and.4 scratchpad1, scratchpad1, %0 \n\t" + " move.4 int_set0, %1 \n\t" + : + : "d" (~mask), "r" (ldsr_soft_irq_mask) + : "cc", "memory" + ); +} + +extern void ldsr_init(void); +extern void ldsr_set_trap_irq(unsigned int irq); +extern void ldsr_mask_vector(unsigned int vector); +extern void ldsr_unmask_vector(unsigned int vector); +extern void ldsr_enable_vector(unsigned int vector); +extern void ldsr_disable_vector(unsigned int vector); +extern thread_t ldsr_get_threadid(void); + +#endif /* _ASM_UBICOM32_LDSR_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/linkage.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/linkage.h new file mode 100644 index 0000000000..63d56a2c48 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/linkage.h @@ -0,0 +1,34 @@ +/* + * arch/ubicom32/include/asm/linkage.h + * Definition of Ubicom32 architecture specific linkage types. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_LINKAGE_H +#define _ASM_UBICOM32_LINKAGE_H + +#define __ocm_text __section(.ocm_text) +#define __ocm_data __section(.ocm_data) + +#endif /* _ASM_UBICOM32_LINKAGE_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/local.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/local.h new file mode 100644 index 0000000000..9c79317309 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/local.h @@ -0,0 +1,33 @@ +/* + * arch/ubicom32/include/asm/local.h + * Generic local.h for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_LOCAL_H +#define _ASM_UBICOM32_LOCAL_H + +#include <asm-generic/local.h> + +#endif /* _ASM_UBICOM32_LOCAL_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/machdep.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/machdep.h new file mode 100644 index 0000000000..c358154795 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/machdep.h @@ -0,0 +1,43 @@ +/* + * arch/ubicom32/include/asm/machdep.h + * Machine dependent utility routines. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_MACHDEP_H +#define _ASM_UBICOM32_MACHDEP_H + +#include <linux/interrupt.h> + +/* Hardware clock functions */ +extern unsigned long hw_timer_offset(void); + +/* machine dependent power off functions */ +extern void (*mach_reset)(void); +extern void (*mach_halt)(void); +extern void (*mach_power_off)(void); + +extern void config_BSP(char *command, int len); + +#endif /* _ASM_UBICOM32_MACHDEP_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/mc146818rtc.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/mc146818rtc.h new file mode 100644 index 0000000000..89b3c568b3 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/mc146818rtc.h @@ -0,0 +1,36 @@ +/* + * arch/ubicom32/include/asm/mc146818rtc.h + * Generic mc146818rtc.h for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +/* + * Machine dependent access functions for RTC registers. + */ +#ifndef _ASM_UBICOM32_MC146818RTC_H +#define _ASM_UBICOM32_MC146818RTC_H + +/* empty include file to satisfy the include in genrtc.c/ide-geometry.c */ + +#endif /* _ASM_UBICOM32_MC146818RTC_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/memory_map.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/memory_map.h new file mode 100644 index 0000000000..a1c3219b39 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/memory_map.h @@ -0,0 +1,66 @@ +/* + * arch/ubicom32/include/asm/memory_map.h + * Machine memory maps/ + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_MEMORY_MAP_H +#define _ASM_UBICOM32_MEMORY_MAP_H + +/* + * Memory Size + */ +#define OCM_SECTOR_SIZE 0x00008000 /* 32K */ + +#if defined(CONFIG_UBICOM32_V3) +#define OCMSIZE 0x00030000 /* 192K on-chip RAM for both program and data */ +#elif defined(CONFIG_UBICOM32_V4) +#define OCMSIZE 0x0003C000 /* 240K on-chip RAM for both program and data */ +#else +#error "Unknown IP5K silicon" +#endif + +#define OCMSTART 0x3ffc0000 /* alias from 0x03000000 for easy + * jump to/from SDRAM */ +#define OCMEND (OCMSTART + OCMSIZE) + +#define SDRAMSTART 0x40000000 + +#define KERNELSTART (SDRAMSTART + 0x00400000) + +#define FLASHSTART 0x60000000 + +/* + * CODELOADER / OS_SYSCALL OCM Reservations + * Don't change these unless you know what you are doing. + */ +#define CODELOADER_SIZE 0x30 +#define CODELOADER_BEGIN OCMSTART /* Must be OCM start for gdb to work. */ +#define CODELOADER_END (CODELOADER_BEGIN + CODELOADER_SIZE) + +#define OS_SYSCALL_BEGIN CODELOADER_END /* system_call at this address */ +#define OS_SYSCALL_SIZE (512 - CODELOADER_SIZE) +#define OS_SYSCALL_END (OS_SYSCALL_BEGIN + OS_SYSCALL_SIZE) + +#endif /* _ASM_UBICOM32_MEMORY_MAP_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/mman.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/mman.h new file mode 100644 index 0000000000..a2a3efe056 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/mman.h @@ -0,0 +1,44 @@ +/* + * arch/ubicom32/include/asm/mman.h + * Memory mapping definitions for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_MMAN_H +#define _ASM_UBICOM32_MMAN_H + +#include <asm-generic/mman.h> + +#define MAP_GROWSDOWN 0x0100 /* stack-like segment */ +#define MAP_DENYWRITE 0x0800 /* ETXTBSY */ +#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */ +#define MAP_LOCKED 0x2000 /* pages are locked */ +#define MAP_NORESERVE 0x4000 /* don't check for reservations */ +#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */ +#define MAP_NONBLOCK 0x10000 /* do not block on IO */ + +#define MCL_CURRENT 1 /* lock all current mappings */ +#define MCL_FUTURE 2 /* lock all future mappings */ + +#endif /* _ASM_UBICOM32_MMAN_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/mmu.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/mmu.h new file mode 100644 index 0000000000..71b604b529 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/mmu.h @@ -0,0 +1,41 @@ +/* + * arch/ubicom32/include/asm/mmu.h + * Definition of mm_context_t struct for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * Copyright (C) 2002, David McCullough <davidm@snapgear.com> + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_MMU_H +#define _ASM_UBICOM32_MMU_H + +typedef struct { + struct vm_list_struct *vmlist; + unsigned long end_brk; +#ifdef CONFIG_BINFMT_ELF_FDPIC + unsigned long exec_fdpic_loadmap; + unsigned long interp_fdpic_loadmap; +#endif +} mm_context_t; + +#endif /* _ASM_UBICOM32_MMU_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/mmu_context.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/mmu_context.h new file mode 100644 index 0000000000..0123a6c91e --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/mmu_context.h @@ -0,0 +1,60 @@ +/* + * arch/ubicom32/include/asm/mmu_context.h + * MMU context definitions for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * Copyright (C) 2004, Microtronix Datacom Ltd., All rights reserved. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ + +#ifndef _ASM_UBICOM32_MMU_CONTEXT_H +#define _ASM_UBICOM32_MMU_CONTEXT_H + +#include <asm/setup.h> +#include <asm/page.h> +#include <asm/pgalloc.h> + +static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) +{ +} + +extern inline int +init_new_context(struct task_struct *tsk, struct mm_struct *mm) +{ + // mm->context = virt_to_phys(mm->pgd); + return(0); +} + +#define destroy_context(mm) do { } while(0) + +static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk) +{ +} + +#define deactivate_mm(tsk,mm) do { } while (0) + +extern inline void activate_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm) +{ +} + +#endif /* _ASM_UBICOM32_MMU_CONTEXT_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/module.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/module.h new file mode 100644 index 0000000000..1c891c674f --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/module.h @@ -0,0 +1,48 @@ +/* + * arch/ubicom32/include/asm/module.h + * Ubicom32 architecture specific module definitions. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_MODULE_H +#define _ASM_UBICOM32_MODULE_H + +struct mod_arch_specific { + void *ocm_inst; + int ocm_inst_size; +}; + +#define Elf_Shdr Elf32_Shdr +#define Elf_Sym Elf32_Sym +#define Elf_Ehdr Elf32_Ehdr + +#define ARCH_PROC_MODULES_EXTRA(m,mod) \ + seq_printf(m, " OCM(%d bytes @ 0x%p)", \ + (mod)->arch.ocm_inst_size, (mod)->arch.ocm_inst) + +#define ARCH_OOPS_MODULE_EXTRA(mod) \ + printk(KERN_INFO "%p %u OCM(%p %u)\n", \ + (mod)->module_core, (mod)->core_size, \ + (mod)->arch.ocm_inst, (mod)->arch.ocm_inst_size) +#endif /* _ASM_UBICOM32_MODULE_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/msgbuf.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/msgbuf.h new file mode 100644 index 0000000000..8d575e0f9d --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/msgbuf.h @@ -0,0 +1,58 @@ +/* + * arch/ubicom32/include/asm/msgbuf.h + * Definition of msqid64_ds struct for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_MSGBUF_H +#define _ASM_UBICOM32_MSGBUF_H + +/* + * The msqid64_ds structure for ubicom32 architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct msqid64_ds { + struct ipc64_perm msg_perm; + __kernel_time_t msg_stime; /* last msgsnd time */ + unsigned long __unused1; + __kernel_time_t msg_rtime; /* last msgrcv time */ + unsigned long __unused2; + __kernel_time_t msg_ctime; /* last change time */ + unsigned long __unused3; + unsigned long msg_cbytes; /* current number of bytes on queue */ + unsigned long msg_qnum; /* number of messages in queue */ + unsigned long msg_qbytes; /* max number of bytes on queue */ + __kernel_pid_t msg_lspid; /* pid of last msgsnd */ + __kernel_pid_t msg_lrpid; /* last receive pid */ + unsigned long __unused4; + unsigned long __unused5; +}; + +#endif /* _ASM_UBICOM32_MSGBUF_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/mutex.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/mutex.h new file mode 100644 index 0000000000..5ab4de0dac --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/mutex.h @@ -0,0 +1,41 @@ +/* + * arch/ubicom32/include/asm/mutex.h + * Generic mutex.h for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +/* + * Pull in the generic implementation for the mutex fastpath. + * + * TODO: implement optimized primitives instead, or leave the generic + * implementation in place, or pick the atomic_xchg() based generic + * implementation. (see asm-generic/mutex-xchg.h for details) + */ + +#ifndef _ASM_UBICOM32_MUTEX_H +#define _ASM_UBICOM32_MUTEX_H + +#include <asm-generic/mutex-dec.h> + +#endif /* _ASM_UBICOM32_MUTEX_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/namei.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/namei.h new file mode 100644 index 0000000000..8010c148f2 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/namei.h @@ -0,0 +1,38 @@ +/* + * arch/ubicom32/include/asm/namei.h + * Definition of __emul_prefix() for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_NAMEI_H +#define _ASM_UBICOM32_NAMEI_H + +/* This dummy routine maybe changed to something useful + * for /usr/gnemul/ emulation stuff. + * Look at asm-sparc/namei.h for details. + */ + +#define __emul_prefix() NULL + +#endif /* _ASM_UBICOM32_NAMEI_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/ocm-alloc.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/ocm-alloc.h new file mode 100644 index 0000000000..ee29d84107 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/ocm-alloc.h @@ -0,0 +1,36 @@ +/* + * arch/ubicom32/include/asm/ocm-alloc.h + * Ubicom32 architecture specific ocm definitions. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_OCM_ALLOC_H +#define _ASM_UBICOM32_OCM_ALLOC_H + + +extern void *ocm_inst_alloc(size_t size, pid_t pid); +extern int ocm_free(const void *ptr); +extern int ocm_inst_free(const void *ptr); + +#endif /* _ASM_UBICOM32_OCM_ALLOC_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/ocm_size.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/ocm_size.h new file mode 100644 index 0000000000..55778fe196 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/ocm_size.h @@ -0,0 +1,3 @@ +#define APP_OCM_CODE_SIZE (0x3ffc2e00-0x3ffc0000) +#define APP_OCM_DATA_SIZE (0x3ffd3500-0x3ffc8000) + diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/ocm_text.lds.inc b/target/linux/ubicom32/files/arch/ubicom32/include/asm/ocm_text.lds.inc new file mode 100644 index 0000000000..5456cab558 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/ocm_text.lds.inc @@ -0,0 +1,175 @@ +/* + * arch/ubicom32/include/asm/ocm_text.lds.inc + * <TODO: Replace with short file description> + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +*(.text.do_csum) +*(.text.tcp_packet) +*(.text.ipt_do_table) +*(.text.nf_conntrack_in) +*(.text.ip_forward) +*(.text.dev_queue_xmit) +*(.text.netif_receive_skb) +*(.text.ip_route_input) +*(.text.ip_finish_output) +*(.text.nf_iterate) +*(.text.__hash_conntrack) +*(.text.memset) +*(.text.memcpy) +*(.text.ip_rcv) +*(.text.__nf_conntrack_find) +*(.text.dev_hard_start_xmit) +*(.text.vlan_dev_hard_start_xmit) +*(.text.vlan_dev_hard_header) +*(.text.__nf_ct_refresh_acct) +*(.text.tcp_error) +*(.text.pfifo_fast_enqueue) +*(.text.ipv4_confirm) +*(.text.ip_output) +*(.text.neigh_connected_output) +*(.text.nf_hook_slow) +*(.text.nf_nat_packet) +*(.text.local_bh_enable) +*(.text.pfifo_fast_dequeue) +*(.text.ubi32_eth_receive) +*(.text.nf_nat_fn) +*(.text.skb_checksum) +*(.text.memmove) +*(.text.ubi32_eth_tx_done) +*(.text.eth_header) +*(.text.skb_release_data) +*(.text.nf_conntrack_find_get) +*(.text.process_backlog) +*(.text.vlan_skb_recv) +*(.text.ip_rcv_finish) +*(.text.__qdisc_run) +*(.text.skb_push) +*(.text.eth_type_trans) +*(.text.__alloc_skb) +*(.text.netif_rx) +*(.text.nf_ip_checksum) +*(.text.__skb_checksum_complete_head) +*(.text.ipv4_conntrack_defrag) +*(.text.tcp_pkt_to_tuple) +*(.text.kfree) +*(.text.tcp_manip_pkt) +*(.text.skb_put) +*(.text.nf_ct_get_tuple) +*(.text.__kmalloc) +*(.text.ubi32_eth_start_xmit) +*(.text.free_block) +*(.text.ipt_hook) +*(.text.kmem_cache_free) +*(.text.skb_pull_rcsum) +*(.text.cache_alloc_refill) +*(.text.skb_release_head_state) +*(.text.manip_pkt) +*(.text.ip_sabotage_in) +*(.text.ip_forward_finish) +*(.text.kmem_cache_alloc) +*(.text.local_bh_disable) +*(.text.ipv4_pkt_to_tuple) +*(.text.inet_proto_csum_replace4) +*(.text.__nf_ct_l4proto_find) +*(.text.csum_partial) +*(.text.neigh_resolve_output) +*(.text.__kfree_skb) +*(.text.kfree_skb) +*(.text.__find_vlan_dev) +*(.text.ldsr_ctxsw_thread) +*(.text.__do_IRQ) +*(.text.skb_pull) +*(.text.ipv4_invert_tuple) +*(.text.nf_ct_invert_tuplepr) +*(.text.skb_make_writable) +*(.text.ipv4_get_l4proto) +*(.text.handle_IRQ_event) +*(.text.net_rx_action) +*(.text.__do_softirq) +*(.text.nf_nat_in) +*(.text.note_interrupt) +*(.text.ipv4_conntrack_in) +*(.text.dst_release) +*(.text.tasklet_action) +*(.text.nf_nat_out) +*(.text.nf_ct_invert_tuple) +*(.text.do_IRQ) +*(.text.__tasklet_schedule) +*(.text.__skb_checksum_complete) +*(.text.ubi32_eth_interrupt) +*(.text.dev_kfree_skb_any) +*(.text.ret_from_interrupt_to_kernel) +*(.text.preemptive_context_save) +*(.text.irq_ack_vector) +*(.text.update_wall_time) +*(.text.ldsr_thread) +*(.text.irq_exit) +*(.text.ubi32_eth_do_tasklet) +*(.text.__napi_schedule) +*(.text.idle_cpu) +*(.text.run_timer_softirq) +*(.text.ldsr_mask_vector) +*(.text.irq_enter) +*(.text.ldsr_get_lsb) +*(.text.ldsr_unmask_vector) +*(.text.ip_fast_csum) +*(.text.hrtimer_run_queues) +*(.text.tcp_invert_tuple) +*(.text.T___705) +*(.text.run_posix_cpu_timers) +*(.text.free_hot_cold_page) +*(.text.lock_timer_base) +*(.text.calc_delta_mine) +*(.text.slab_destroy) +*(.text.rcu_pending) +*(.text.scheduler_tick) +*(.text.hrtimer_run_pending) +*(.text.do_softirq) +*(.text.del_timer) +*(.text.irq_end_vector) +*(.text.pci_read_u32) +*(.text.udivmodsi4) +*(.text.memcmp) +*(.text.memset) +*(.text.__slab_alloc) +*(.text.br_handle_frame) +*(.text.br_fdb_update) +*(.text.__br_fdb_get) +*(.text.br_forward) +*(.text.br_handle_frame_finish) +*(.text.pci_write_u32) +*(.text.kmem_freepages) +*(.text.br_dev_queue_push_xmit) +*(.text.ioread32) +*(.text.next_zones_zonelist) +*(.text.ubi32_pci_read_u32) +*(.text.zone_watermark_ok) +*(.text.__rmqueue_smallest) +*(.text.ubi32_eth_napi_poll) +*(.text.ubi32_pci_write_u32) +*(.text.ubi32_pci_read_u32) +*(.text._local_bh_enable) +*(.text._local_bh_disable) +*(.text.get_slab) diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/page.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/page.h new file mode 100644 index 0000000000..89c6ce61c7 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/page.h @@ -0,0 +1,106 @@ +/* + * arch/ubicom32/include/asm/page.h + * Memory page related operations and definitions. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_PAGE_H +#define _ASM_UBICOM32_PAGE_H + +/* PAGE_SHIFT determines the page size */ + +#define PAGE_SHIFT 12 +#define PAGE_SIZE (1 << PAGE_SHIFT) +#define PAGE_MASK (~(PAGE_SIZE-1)) + +#include <asm/setup.h> + +#ifndef __ASSEMBLY__ + +#define get_user_page(vaddr) __get_free_page(GFP_KERNEL) +#define free_user_page(page, addr) free_page(addr) + +#define clear_page(page) memset((page), 0, PAGE_SIZE) +#define copy_page(to,from) memcpy((to), (from), PAGE_SIZE) + +#define clear_user_page(page, vaddr, pg) clear_page(page) +#define copy_user_page(to, from, vaddr, pg) copy_page(to, from) + +#define __alloc_zeroed_user_highpage(movableflags, vma, vaddr) \ + alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO | movableflags, vma, vaddr) +#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE + +/* + * These are used to make use of C type-checking.. + */ +typedef struct { unsigned long pte; } pte_t; +typedef struct { unsigned long pmd[16]; } pmd_t; +typedef struct { unsigned long pgd; } pgd_t; +typedef struct { unsigned long pgprot; } pgprot_t; +typedef struct page *pgtable_t; + +#define pte_val(x) ((x).pte) +#define pmd_val(x) ((&x)->pmd[0]) +#define pgd_val(x) ((x).pgd) +#define pgprot_val(x) ((x).pgprot) + +#define __pte(x) ((pte_t) { (x) } ) +#define __pmd(x) ((pmd_t) { (x) } ) +#define __pgd(x) ((pgd_t) { (x) } ) +#define __pgprot(x) ((pgprot_t) { (x) } ) + +extern unsigned long memory_start; +extern unsigned long memory_end; + +#endif /* !__ASSEMBLY__ */ + +#include <asm/page_offset.h> + +#define PAGE_OFFSET (PAGE_OFFSET_RAW) + +#ifndef __ASSEMBLY__ + +#define __pa(vaddr) virt_to_phys((void *)(vaddr)) +#define __va(paddr) phys_to_virt((unsigned long)(paddr)) + +#define virt_to_pfn(kaddr) (__pa(kaddr) >> PAGE_SHIFT) +#define pfn_to_virt(pfn) __va((pfn) << PAGE_SHIFT) + +#define virt_to_page(addr) (mem_map + (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT)) +#define page_to_virt(page) ((((page) - mem_map) << PAGE_SHIFT) + PAGE_OFFSET) + +#define pfn_to_page(pfn) virt_to_page(pfn_to_virt(pfn)) +#define page_to_pfn(page) virt_to_pfn(page_to_virt(page)) +#define pfn_valid(pfn) ((pfn) < max_mapnr) + +#define virt_addr_valid(kaddr) (((void *)(kaddr) >= (void *)PAGE_OFFSET) && \ + ((void *)(kaddr) < (void *)memory_end)) + +#endif /* __ASSEMBLY__ */ + +#ifdef __KERNEL__ +#include <asm-generic/page.h> +#endif + +#endif /* _ASM_UBICOM32_PAGE_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/page_offset.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/page_offset.h new file mode 100644 index 0000000000..8536568a99 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/page_offset.h @@ -0,0 +1,35 @@ +/* + * arch/ubicom32/include/asm/page_offset.h + * Definition of PAGE_OFFSET_RAW for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ + +#ifndef _ASM_UBICOM32_PAGE_OFFSET_H +#define _ASM_UBICOM32_PAGE_OFFSET_H + +/* This handles the memory map.. */ +#define PAGE_OFFSET_RAW 0x3ffc0000 + +#endif /* _ASM_UBICOM32_PAGE_OFFSET_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/param.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/param.h new file mode 100644 index 0000000000..00e5a79034 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/param.h @@ -0,0 +1,49 @@ +/* + * arch/ubicom32/include/asm/param.h + * Definition of miscellaneous constants, including HZ. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_PARAM_H +#define _ASM_UBICOM32_PARAM_H + +#ifdef __KERNEL__ +#define HZ CONFIG_HZ +#define USER_HZ HZ +#define CLOCKS_PER_SEC (USER_HZ) +#endif + +#ifndef HZ +#define HZ 100 +#endif + +#define EXEC_PAGESIZE 4096 + +#ifndef NOGROUP +#define NOGROUP (-1) +#endif + +#define MAXHOSTNAMELEN 64 /* max length of hostname */ + +#endif /* _ASM_UBICOM32_PARAM_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/pci.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/pci.h new file mode 100644 index 0000000000..0dce8bdc60 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/pci.h @@ -0,0 +1,210 @@ +/* + * arch/ubicom32/include/asm/pci.h + * Definitions of PCI operations for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_PCI_H +#define _ASM_UBICOM32_PCI_H + +#include <asm/io.h> + +/* The PCI address space does equal the physical memory + * address space. The networking and block device layers use + * this boolean for bounce buffer decisions. + */ +#define PCI_DMA_BUS_IS_PHYS (1) + + + +/* + * Perform a master read/write to the PCI bus. + * These functions return a PCI_RESP_xxx code. + */ +extern u8 pci_read_u32(u8 pci_cmd, u32 address, u32 *data); +extern u8 pci_write_u32(u8 pci_cmd, u32 address, u32 data); +extern u8 pci_read_u16(u8 pci_cmd, u32 address, u16 *data); +extern u8 pci_write_u16(u8 pci_cmd, u32 address, u16 data); +extern u8 pci_read_u8(u8 pci_cmd, u32 address, u8 *data); +extern u8 pci_write_u8(u8 pci_cmd, u32 address, u8 data); + + +#define PCIBIOS_MIN_IO 0x100 +#define PCIBIOS_MIN_MEM 0x10000000 + +#define pcibios_assign_all_busses() 0 +#define pcibios_scan_all_fns(a, b) 0 +extern void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, + struct resource *res); + +extern void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, + struct pci_bus_region *region); + +struct pci_sys_data; +struct pci_bus; + +struct hw_pci { + struct list_head buses; + int nr_controllers; + int (*setup)(int nr, struct pci_sys_data *); + struct pci_bus *(*scan)(int nr, struct pci_sys_data *); + void (*preinit)(void); + void (*postinit)(void); + u8 (*swizzle)(struct pci_dev *dev, u8 *pin); + int (*map_irq)(struct pci_dev *dev, u8 slot, u8 pin); +}; + +/* + * Per-controller structure + */ +struct pci_sys_data { + struct list_head node; + int busnr; /* primary bus number */ + u64 mem_offset; /* bus->cpu memory mapping offset */ + unsigned long io_offset; /* bus->cpu IO mapping offset */ + struct pci_bus *bus; /* PCI bus */ + struct resource *resource[3]; /* Primary PCI bus resources */ + /* Bridge swizzling */ + u8 (*swizzle)(struct pci_dev *, u8 *); + /* IRQ mapping */ + int (*map_irq)(struct pci_dev *, u8, u8); + struct hw_pci *hw; +}; + +static inline struct resource * +pcibios_select_root(struct pci_dev *pdev, struct resource *res) +{ + struct resource *root = NULL; + + if (res->flags & IORESOURCE_IO) + root = &ioport_resource; + if (res->flags & IORESOURCE_MEM) + root = &iomem_resource; + + return root; +} + +static inline void pcibios_set_master(struct pci_dev *dev) +{ + /* No special bus mastering setup handling */ +} +#define HAVE_ARCH_PCI_SET_DMA_MAX_SEGMENT_SIZE 1 +#define HAVE_ARCH_PCI_SET_DMA_SEGMENT_BOUNDARY 1 + +#ifdef CONFIG_PCI +static inline void * pci_alloc_consistent(struct pci_dev *hwdev, size_t size, + dma_addr_t *dma_handle) +{ + void *vaddr = kmalloc(size, GFP_KERNEL); + if(vaddr != NULL) { + *dma_handle = virt_to_phys(vaddr); + } + return vaddr; +} + +static inline int pci_dma_supported(struct pci_dev *hwdev, dma_addr_t mask) +{ + return 1; +} + +static inline void pci_free_consistent(struct pci_dev *hwdev, size_t size, + void *cpu_addr, dma_addr_t dma_handle) +{ + kfree(cpu_addr); + return; +} + +static inline dma_addr_t pci_map_single(struct pci_dev *hwdev, void *ptr, + size_t size, int direction) +{ + return virt_to_phys(ptr); +} + +static inline void pci_unmap_single(struct pci_dev *hwdev, dma_addr_t dma_addr, + size_t size, int direction) +{ + return; +} + +static inline dma_addr_t +pci_map_page(struct pci_dev *hwdev, struct page *page, + unsigned long offset, size_t size, int direction) +{ + return pci_map_single(hwdev, page_address(page) + offset, size, (int)direction); +} + +static inline void +pci_unmap_page(struct pci_dev *hwdev, dma_addr_t dma_address, + size_t size, int direction) +{ + pci_unmap_single(hwdev, dma_address, size, direction); +} + +static inline int +pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sg, + int nents, int direction) +{ + return nents; +} + +static inline void +pci_unmap_sg(struct pci_dev *hwdev, struct scatterlist *sg, + int nents, int direction) +{ +} + +static inline void +pci_dma_sync_sg_for_cpu(struct pci_dev *hwdev, struct scatterlist *sg, + int nelems, int direction) +{ +} + +static inline void +pci_dma_sync_sg_for_device(struct pci_dev *hwdev, struct scatterlist *sg, + int nelems, int direction) +{ +} + +static inline void +pci_dma_sync_single_for_cpu(struct pci_dev *hwdev, dma_addr_t dma_handle, + size_t size, int direction) +{ +} + +static inline void +pci_dma_sync_single_for_device(struct pci_dev *hwdev, dma_addr_t dma_handle, + size_t size, int direction) +{ +} + +static inline int +pci_dma_mapping_error(struct pci_dev *hwdev, dma_addr_t dma_addr) +{ + return dma_addr == 0; +} +extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max); +extern void pci_iounmap(struct pci_dev *dev, void __iomem *); +#endif + +#endif /* _ASM_UBICOM32_PCI_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/pcm_tio.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/pcm_tio.h new file mode 100644 index 0000000000..13b5fc1e88 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/pcm_tio.h @@ -0,0 +1,84 @@ +/* + * arch/ubicom32/include/asm/pcm_tio.h + * Ubicom32 architecture PCM TIO definitions. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + */ +#ifndef _ASM_UBICOM32_PCM_TIO_H +#define _ASM_UBICOM32_PCM_TIO_H + +#include <asm/devtree.h> + +#define PCM_TIO_REGS_VERSION 2 +struct pcm_tio_regs { + /* + * set this value to 1 to reload the parameters and restart the HRT + */ + u32_t reload; + + /* + * Pointers to the input and output buffers + */ + void *input_buf; + void *output_buf; + + /* + * Buffer size (see pcm_hrt.S for constraints) + */ + u32_t buffer_size; + + /* + * Current cycle. This variable increases every time half the buffer + * is consumed. + */ + u32_t cycle; + + /* + * Fields below this line are not accessed by the HRT. They are purely + * informational for the user of this TIO. + */ + + /* + * Version of this structure + */ + u32_t version; + + /* + * Number of channels supported + */ + u32_t channels; + + /* + * Maximum buffer size + */ + u32_t max_buffer_size; +}; + +/* + * Our device node + */ +#define PCM_TIO_NODE_VERSION 1 +struct pcm_tio_node { + struct devtree_node dn; + u32_t version; + struct pcm_tio_regs *regs; +}; + +#endif + diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/percpu.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/percpu.h new file mode 100644 index 0000000000..4d51e60559 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/percpu.h @@ -0,0 +1,33 @@ +/* + * arch/ubicom32/include/asm/percpu.h + * Generic percpu.h for the Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_PERCPU_H +#define _ASM_UBICOM32_PERCPU_H + +#include <asm-generic/percpu.h> + +#endif /* _ASM_UBICOM32_PERCPU_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/pgalloc.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/pgalloc.h new file mode 100644 index 0000000000..397d19e419 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/pgalloc.h @@ -0,0 +1,36 @@ +/* + * arch/ubicom32/include/asm/pgalloc.h + * Page table allocation definitions. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_PGALLOC_H +#define _ASM_UBICOM32_PGALLOC_H + +#include <linux/mm.h> +#include <asm/setup.h> + +#define check_pgt_cache() do { } while (0) + +#endif /* _ASM_UBICOM32_PGALLOC_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/pgtable.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/pgtable.h new file mode 100644 index 0000000000..70ad115ccf --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/pgtable.h @@ -0,0 +1,124 @@ +/* + * arch/ubicom32/include/asm/pgtable.h + * Ubicom32 pseudo page table definitions and operations. + * + * (C) Copyright 2009, Ubicom, Inc. + * Copyright (C) 2004 Microtronix Datacom Ltd + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + * and various works, Alpha, ix86, M68K, Sparc, ...et al + */ +#ifndef _ASM_UBICOM32_PGTABLE_H +#define _ASM_UBICOM32_PGTABLE_H + +#include <asm-generic/4level-fixup.h> + +//vic - this bit copied from m68knommu version +#include <asm/setup.h> +#include <asm/io.h> +#include <linux/sched.h> + +typedef pte_t *pte_addr_t; + +#define pgd_present(pgd) (1) /* pages are always present on NO_MM */ +#define pgd_none(pgd) (0) +#define pgd_bad(pgd) (0) +#define pgd_clear(pgdp) +#define kern_addr_valid(addr) (1) +#define pmd_offset(a, b) ((void *)0) + +#define PAGE_NONE __pgprot(0) /* these mean nothing to NO_MM */ +#define PAGE_SHARED __pgprot(0) /* these mean nothing to NO_MM */ +#define PAGE_COPY __pgprot(0) /* these mean nothing to NO_MM */ +#define PAGE_READONLY __pgprot(0) /* these mean nothing to NO_MM */ +#define PAGE_KERNEL __pgprot(0) /* these mean nothing to NO_MM */ +//vic - this bit copied from m68knommu version + +extern void paging_init(void); +#define swapper_pg_dir ((pgd_t *) 0) + +#define __swp_type(x) (0) +#define __swp_offset(x) (0) +#define __swp_entry(typ,off) ((swp_entry_t) { ((typ) | ((off) << 7)) }) +#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) +#define __swp_entry_to_pte(x) ((pte_t) { (x).val }) + +/* + * pgprot_noncached() is only for infiniband pci support, and a real + * implementation for RAM would be more complicated. + */ +#define pgprot_noncached(prot) (prot) + +static inline int pte_file(pte_t pte) { return 0; } + +/* + * ZERO_PAGE is a global shared page that is always zero: used + * for zero-mapped memory areas etc.. + */ +#define ZERO_PAGE(vaddr) (virt_to_page(0)) + +extern unsigned int kobjsize(const void *objp); +extern int is_in_rom(unsigned long); + +/* + * No page table caches to initialise + */ +#define pgtable_cache_init() do { } while (0) + +#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \ + remap_pfn_range(vma, vaddr, pfn, size, prot) + +extern inline void flush_cache_mm(struct mm_struct *mm) +{ +} + +extern inline void flush_cache_range(struct mm_struct *mm, + unsigned long start, + unsigned long end) +{ +} + +/* Push the page at kernel virtual address and clear the icache */ +extern inline void flush_page_to_ram (unsigned long address) +{ +} + +/* Push n pages at kernel virtual address and clear the icache */ +extern inline void flush_pages_to_ram (unsigned long address, int n) +{ +} + +/* + * All 32bit addresses are effectively valid for vmalloc... + * Sort of meaningless for non-VM targets. + */ +#define VMALLOC_START 0 +#define VMALLOC_END 0xffffffff + +#define arch_enter_lazy_mmu_mode() do {} while (0) +#define arch_leave_lazy_mmu_mode() do {} while (0) +#define arch_flush_lazy_mmu_mode() do {} while (0) +#define arch_enter_lazy_cpu_mode() do {} while (0) +#define arch_leave_lazy_cpu_mode() do {} while (0) +#define arch_flush_lazy_cpu_mode() do {} while (0) + +#endif /* _ASM_UBICOM32_PGTABLE_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/plio.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/plio.h new file mode 100644 index 0000000000..ade78f246b --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/plio.h @@ -0,0 +1,313 @@ +/* + * plio.h + * PLIO defines. + * + * Copyright © 2009 Ubicom Inc. <www.ubicom.com>. All Rights Reserved. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can + * redistribute it and/or modify it under the terms of the GNU General + * Public License as published by the Free Software Foundation, either + * version 2 of the License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * This file contains confidential information of Ubicom, Inc. and your use of + * this file is subject to the Ubicom Software License Agreement distributed with + * this file. If you are uncertain whether you are an authorized user or to report + * any unauthorized use, please contact Ubicom, Inc. at +1-408-789-2200. + * Unauthorized reproduction or distribution of this file is subject to civil and + * criminal penalties. + */ + +#ifndef __PLIO__H__ +#define __PLIO__H__ + +#include <asm/ip5000.h> +#include <asm/thread.h> + +#define PLIO_PORT RD +#define PLIO_EXT_PORT RI + +#define TRANSMIT_FIFO_WATERMARK 8 + +/* + * PLIO non-blocking register definitions + */ +#define PLIO_FN 2 + +typedef struct { + unsigned : 10; + unsigned rxfifo_thread_enable: 1; /* allowed rxfifo thread enable */ + unsigned : 1; + unsigned rxfifo_thread: 4; /* allowed rxfifo thread access */ + unsigned : 4; + unsigned br_thread: 4; /* allowed blocking region thread access */ + unsigned fn_reset: 4; /* function reset bit vector */ + unsigned rxfifo_sel: 1; /* select between RXFIFO 0 and 1 */ + unsigned fn_sel: 3; /* select port function */ +} plio_io_function_t; + +typedef struct { + unsigned : 24; + unsigned pin:8; +} plio_gpio_t; + +typedef struct { + unsigned : 16; + unsigned txfifo_uf: 1; /* TXFIFO underflow */ + unsigned txfifo_wm: 1; /* TXFIFO watermark */ + unsigned rxfifo_of: 1; /* RXFIFO overflow */ + unsigned rxfifo_wm: 1; /* RXFIFO watermark */ + unsigned : 5; + unsigned lreg_int_addr_rd: 1; /* read from specified LREG address */ + unsigned lreg_int_addr_wr: 1; /* write to specified LREG address */ + unsigned extctl_int: 4; /* synchronized external interrupts */ + unsigned pfsm_int: 1; /* state machine */ +} plio_intstat_t; + +typedef struct { + unsigned txfifo_reset: 1; /* TXFIFO reset for int_set only */ + unsigned rxfifo_reset: 1; /* RXFIFO reset for int_set only */ + unsigned : 11; + unsigned idif_txfifo_flush: 1; /* flush TXFIFO and idif_txfifo */ + unsigned idif_rxfifo_flush: 1; /* flush RXFIFO and idif_rxfifo */ + unsigned pfsm_start: 1; /* input to fsm */ + unsigned txfifo_uf: 1; /* TXFIFO underflow */ + unsigned txfifo_wm: 1; /* TXFIFO watermark */ + unsigned rxfifo_of: 1; /* RXFIFO overflow */ + unsigned rxfifo_wm: 1; /* RXFIFO watermark */ + unsigned : 5; + unsigned lreg_int_addr_rd: 1; /* read from specified LREG address */ + unsigned lreg_int_addr_wr: 1; /* write to specified LREG address */ + unsigned extctl_int: 4; /* synchronized external interrupts */ + unsigned pfsm_int: 1; /* state machine */ +} plio_intset_t; + +typedef enum { + PLIO_PORT_MODE_D, + PLIO_PORT_MODE_DE, + PLIO_PORT_MODE_DI, + PLIO_PORT_MODE_DEI, + PLIO_PORT_MODE_DC, +} plio_port_mode_t; + +typedef enum { + PLIO_CLK_CORE, /* CORE CLK */ + PLIO_CLK_IO, /* IO CLK */ + PLIO_CLK_EXT, /* EXT CLK */ +} plio_clk_src_t; +typedef struct { + unsigned : 4; + unsigned edif_iaena_sel: 1; /* Input Address Enable Select */ + unsigned edif_iaclk_sel: 1; /* Input Address Clock Select */ + unsigned edif_iald_inv: 1; /* Input Address Strobe Invert */ + unsigned edif_idclk_sel: 1; /* Input Data Clock Select */ + unsigned edif_idld_inv: 1; /* Input Data Strobe Invert */ + unsigned edif_ds: 3; /* specify IDR and ODR data shift */ + unsigned edif_cmp_mode: 1; /* configure IDR comparator output */ + unsigned edif_idena_sel: 1; /* Input Data Enable Select */ + unsigned ecif_extclk_ena: 1; /* plio_extctl output select */ + unsigned idif_tx_fifo_cmd_sel: 1; /* select pfsm_cmd data word position */ + unsigned ptif_porti_cfg: 2; /* select port I pin configuration */ + unsigned ptif_portd_cfg: 3; /* select port D pin configuration */ + plio_port_mode_t ptif_port_mode: 3; /* select other plio ports */ + unsigned icif_clk_plio_ext_inv: 1; /* invert external plio clock when set */ + unsigned icif_rst_plio: 1; /* reset plio function and io fifos */ + plio_clk_src_t icif_clk_src_sel: 2; /* select plio clock source */ + unsigned pfsm_prog: 1; /* enable pfsm programming */ + unsigned pfsm_cmd: 3; /* software input to pfsm */ +} plio_fctl0_t; + +typedef struct { + unsigned : 2; + unsigned idif_byteswap_tx: 3; /* swap TXFIFO byte order */ + unsigned idif_byteswap_rx: 3; /* swap RXFIFO byte order */ + unsigned : 1; + unsigned lreg_ena: 1; /* enable local register map */ + unsigned lreg_addr_fifo_cmp_ena: 1; /* enable a specific LREG address from/to TX/RX fifos */ + unsigned lreg_addr_fifo_cmp: 5; /* LREG address routed from/to TX/RX fifos */ + unsigned : 1; + unsigned dcod_iald_idld_sel: 2; /* select address/data strobes */ + unsigned dcod_rw_src_sel: 1; /* select LREG strobe source */ + unsigned dcod_rd_sel: 5; /* select read strobe source */ + unsigned dcod_wr_sel: 5; /* select write strobe source */ + unsigned dcod_rd_lvl: 1; /* select active level of read strobe */ + unsigned dcod_wr_lvl: 1; /* select active level of read strobe */ +} plio_fctl1_t; + +typedef struct { + unsigned icif_eclk_div: 16; /* external plio clock divider */ + unsigned icif_iclk_div: 16; /* internal plio clock divider */ +} plio_fctl2_t; + +typedef struct { + unsigned : 27; + unsigned pfsm_state: 5; /* current pfsm state */ +} plio_stat_0_t; + +typedef struct { + unsigned : 3; + unsigned lreg_r_int_addr: 5; + unsigned : 11; + unsigned lreg_w_int_addr: 5; + unsigned lreg_w_int_data: 8; +} plio_stat_1_t; + +typedef struct { + unsigned : 32; +} plio_stat_2_t; + +typedef struct { + unsigned tx: 16; + unsigned rx: 16; +} plio_io_fifo_wm_t, plio_io_fifo_lvl_t; + + +/* plio blocking region register definitions + */ +typedef struct { + unsigned ns1: 5; + unsigned ic1: 7; + unsigned ec1: 4; + unsigned ns0: 5; + unsigned ic0: 7; + unsigned ec0: 4; +} plio_sram_t; + +typedef struct { + unsigned : 2; + unsigned s9: 3; + unsigned s8: 3; + unsigned s7: 3; + unsigned s6: 3; + unsigned s5: 3; + unsigned s4: 3; + unsigned s3: 3; + unsigned s2: 3; + unsigned s1: 3; + unsigned s0: 3; +} plio_grpsel_t; + +typedef struct { + unsigned s7: 4; + unsigned s6: 4; + unsigned s5: 4; + unsigned s4: 4; + unsigned s3: 4; + unsigned s2: 4; + unsigned s1: 4; + unsigned s0: 4; +} plio_cs_lut_t; + +typedef struct { + unsigned lut3: 8; + unsigned lut2: 8; + unsigned lut1: 8; + unsigned lut0: 8; +} plio_extctl_t; + +typedef struct { + plio_grpsel_t grpsel[4]; + u16_t cv[16]; + plio_cs_lut_t cs_lut[4]; + plio_extctl_t extctl_o_lut[8]; +} plio_pfsm_t; + +typedef struct { + u32_t odr_oe_sel; + u32_t odr_oe; + u32_t cmp; + u32_t ncmp; + u32_t cmp_mask; +} plio_edif_t; + +typedef enum { + PLIO_ECIF_CLK_OUT = 9, + PLIO_ECIF_IALD = 9, + PLIO_ECIF_CLK_IN = 8, + PLIO_ECIF_IDLD = 8, + PLIO_ECIF_INT = 2, +} plio_ecif_output_t; + +typedef struct { + u32_t bypass_sync; + u32_t ift; + u32_t output_type; + u32_t output_ena; + u32_t output_lvl; +} plio_ecif_t; + +typedef struct { + u32_t idr_addr_pos_mask; + u32_t reserved; + u32_t lreg_bar; +} plio_dcod_t; + +typedef struct { + u32_t addr_rd_ena; + u32_t addr_wr_ena; + u32_t addr_rd_int_ena; + u32_t addr_wr_int_ena; +} plio_lcfg_t; + + +/* + * PLIO configuration + */ +typedef struct { + plio_fctl0_t fctl0; + plio_fctl1_t fctl1; + plio_fctl2_t fctl2; +} plio_fctl_t; + +typedef struct { + plio_pfsm_t pfsm; + plio_edif_t edif; + plio_ecif_t ecif; + plio_dcod_t dcod; + plio_lcfg_t lcfg; +} plio_config_t; + +typedef struct { + plio_io_function_t function; + plio_gpio_t gpio_ctl; + plio_gpio_t gpio_out; + plio_gpio_t gpio_in; + plio_intstat_t intstat; + plio_intstat_t intmask; + plio_intset_t intset; + plio_intstat_t intclr; + unsigned tx_lo; + unsigned tx_hi; + unsigned rx_lo; + unsigned rx_hi; + plio_fctl0_t fctl0; + plio_fctl1_t fctl1; + plio_fctl2_t fctl2; + plio_stat_0_t stat0; + plio_stat_1_t stat1; + plio_stat_2_t stat2; + plio_io_fifo_wm_t fifo_wm; + plio_io_fifo_lvl_t fifo_lvl; +} plio_nbr_t; + +typedef struct { + u32_t pfsm_sram[256]; + plio_config_t config; +} plio_br_t; + +#define PLIO_NBR ((plio_nbr_t *)(PLIO_PORT)) +#define PLIO_BR ((plio_br_t *)((PLIO_PORT + IO_PORT_BR_OFFSET))) +#define PEXT_NBR ((plio_nbr_t *)(PLIO_EXT_PORT)) + +extern void plio_init(const plio_fctl_t *plio_fctl, const plio_config_t *plio_config, const plio_sram_t plio_sram_cfg[], int sram_cfg_size); + +#endif // __PLIO__H__ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/poll.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/poll.h new file mode 100644 index 0000000000..8e92b76376 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/poll.h @@ -0,0 +1,36 @@ +/* + * arch/ubicom32/include/asm/poll.h + * Ubicom32 specific poll() related flags definitions. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_POLL_H +#define _ASM_UBICOM32_POLL_H + +#define POLLWRNORM POLLOUT +#define POLLWRBAND 0x0100 + +#include <asm-generic/poll.h> + +#endif /* _ASM_UBICOM32_POLL_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/posix_types.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/posix_types.h new file mode 100644 index 0000000000..40b69f8518 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/posix_types.h @@ -0,0 +1,93 @@ +/* + * arch/ubicom32/include/asm/posix_types.h + * Ubicom32 architecture posix types. + * + * (C) Copyright 2009, Ubicom, Inc. + * Copyright (C) 2004 Microtronix Datacom Ltd + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef __ARCH_UBICOM32_POSIX_TYPES_H +#define __ARCH_UBICOM32_POSIX_TYPES_H + +/* + * This file is generally used by user-level software, so you need to + * be a little careful about namespace pollution etc. Also, we cannot + * assume GCC is being used. + */ + +typedef unsigned long __kernel_ino_t; +typedef unsigned short __kernel_mode_t; +typedef unsigned short __kernel_nlink_t; +typedef long __kernel_off_t; +typedef int __kernel_pid_t; +typedef unsigned short __kernel_ipc_pid_t; +typedef unsigned short __kernel_uid_t; +typedef unsigned short __kernel_gid_t; +typedef unsigned int __kernel_size_t; +typedef int __kernel_ssize_t; +typedef int __kernel_ptrdiff_t; +typedef long __kernel_time_t; +typedef long __kernel_suseconds_t; +typedef long __kernel_clock_t; +typedef int __kernel_timer_t; +typedef int __kernel_clockid_t; +typedef int __kernel_daddr_t; +typedef char * __kernel_caddr_t; +typedef unsigned short __kernel_uid16_t; +typedef unsigned short __kernel_gid16_t; +typedef unsigned int __kernel_uid32_t; +typedef unsigned int __kernel_gid32_t; + +typedef unsigned short __kernel_old_uid_t; +typedef unsigned short __kernel_old_gid_t; +typedef unsigned short __kernel_old_dev_t; + +#ifdef __GNUC__ +typedef long long __kernel_loff_t; +#endif + +typedef struct { +#if defined(__KERNEL__) || defined(__USE_ALL) + int val[2]; +#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */ + int __val[2]; +#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */ +} __kernel_fsid_t; + +#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) + +#undef __FD_SET +#define __FD_SET(d, set) ((set)->fds_bits[__FDELT(d)] |= __FDMASK(d)) + +#undef __FD_CLR +#define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d)) + +#undef __FD_ISSET +#define __FD_ISSET(d, set) ((set)->fds_bits[__FDELT(d)] & __FDMASK(d)) + +#undef __FD_ZERO +#define __FD_ZERO(fdsetp) (memset (fdsetp, 0, sizeof(*(fd_set *)fdsetp))) + +#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */ + +#endif diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/processor.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/processor.h new file mode 100644 index 0000000000..92e49e81ac --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/processor.h @@ -0,0 +1,163 @@ +/* + * arch/ubicom32/include/asm/processor.h + * Thread related definitions for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * Copyright (C) 1995 Hamish Macdonald + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ + +#ifndef _ASM_UBICOM32_PROCESSOR_H +#define _ASM_UBICOM32_PROCESSOR_H + +/* + * Default implementation of macro that returns current + * instruction pointer ("program counter"). + */ +#define current_text_addr() ({ __label__ _l; _l: &&_l;}) + +#include <linux/compiler.h> +#include <linux/threads.h> +#include <asm/types.h> +#include <asm/segment.h> +#include <asm/fpu.h> +#include <asm/ptrace.h> +#include <asm/current.h> +#include <asm/thread_info.h> + +#if defined(CONFIG_UBICOM32_V3) + #define CPU "IP5K" +#endif +#if defined(CONFIG_UBICOM32_V4) + #define CPU "IP7K" +#endif +#ifndef CPU + #define CPU "UNKNOWN" +#endif + +/* + * User space process size: 1st byte beyond user address space. + */ +extern unsigned long memory_end; +#define TASK_SIZE (memory_end) + +/* + * This decides where the kernel will search for a free chunk of vm + * space during mmap's. We won't be using it + */ +#define TASK_UNMAPPED_BASE 0 + +/* + * This is the structure where we are going to save callee-saved registers. + * A5 is the return address, A7 is the stack pointer, A6 is the frame + * pointer. This is the frame that is created because of switch_to. This + * is not the frame due to interrupt preemption or because of syscall entry. + */ + +struct thread_struct { + unsigned long d10; /* D10 */ + unsigned long d11; /* D11 */ + unsigned long d12; /* D12 */ + unsigned long d13; /* D13 */ + unsigned long a1; /* A1 */ + unsigned long a2; /* A2 */ + unsigned long a5; /* A5 return address. */ + unsigned long a6; /* A6 */ + unsigned long sp; /* A7 kernel stack pointer. */ +}; + +#define INIT_THREAD { \ + 0, 0, 0, 0, 0, 0, 0, 0, \ + sizeof(init_stack) + (unsigned long) init_stack - 8, \ +} + +/* + * Do necessary setup to start up a newly executed thread. + * + * pass the data segment into user programs if it exists, + * it can't hurt anything as far as I can tell + */ +/* + * Do necessary setup to start up a newly executed thread. + */ +#define start_thread(regs, new_pc, new_sp) \ + do { \ + regs->pc = new_pc & ~3; \ + regs->an[5] = new_pc & ~3; \ + regs->an[7] = new_sp; \ + regs->nesting_level = -1; \ + regs->frame_type = UBICOM32_FRAME_TYPE_NEW_THREAD; \ + regs->thread_type = NORMAL_THREAD; \ + } while(0) + +/* Forward declaration, a strange C thing */ +struct task_struct; + +/* Free all resources held by a thread. */ +static inline void release_thread(struct task_struct *dead_task) +{ +} + +/* Prepare to copy thread state - unlazy all lazy status */ +#define prepare_to_copy(tsk) do { } while (0) + +extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags); + +/* + * Free current thread data structures etc.. + */ +static inline void exit_thread(void) +{ +} + +unsigned long thread_saved_pc(struct task_struct *tsk); +unsigned long get_wchan(struct task_struct *p); + +#define KSTK_EIP(tsk) (tsk->thread.a5) +#define KSTK_ESP(tsk) (tsk->thread.sp) + +#define cpu_relax() barrier() + +extern void processor_init(void); +extern unsigned int processor_timers(void); +extern unsigned int processor_threads(void); +extern unsigned int processor_frequency(void); +extern int processor_interrupts(unsigned int *int0, unsigned int *int1); +extern void processor_ocm(unsigned long *socm, unsigned long *eocm); +extern void processor_dram(unsigned long *sdram, unsigned long *edram); + +#define THREAD_SIZE_LONGS (THREAD_SIZE/sizeof(unsigned long)) +#define KSTK_TOP(info) \ +({ \ + unsigned long *__ptr = (unsigned long *)(info); \ + (unsigned long)(&__ptr[THREAD_SIZE_LONGS]); \ +}) + +#define task_pt_regs(task) \ +({ \ + struct pt_regs *__regs__; \ + __regs__ = (struct pt_regs *)(KSTK_TOP(task_stack_page(task))-8); \ + __regs__ - 1; \ +}) + +#endif /* _ASM_UBICOM32_PROCESSOR_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/profilesample.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/profilesample.h new file mode 100644 index 0000000000..6e42269e3b --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/profilesample.h @@ -0,0 +1,44 @@ +/* + * arch/ubicom32/mach-common/profile.h + * Private data for the profile module + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + */ + + +#ifndef _PROFILESAMPLE_H_ +#define _PROFILESAMPLE_H_ + +/* + * a sample taken by the ipProfile package for sending to the profilertool + */ +struct profile_sample { + unsigned int pc; /* PC value */ + unsigned int a5; /* a5 contents for parent of leaf function */ + unsigned int parent; /* return address from stack, to find the caller */ + unsigned int latency; /* CPU clocks since the last message dispatch in this thread (thread 0 ony for now) */ + unsigned short active; /* which threads are active - for accurate counting */ + unsigned short d_blocked; /* which threads are blocked due to D cache misses */ + unsigned short i_blocked; /* which threads are blocked due to I cache misses */ + unsigned char cond_codes; /* for branch prediction */ + unsigned char thread; /* I-blocked, D-blocked, 4-bit thread number */ +}; + +#endif diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/ptrace.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/ptrace.h new file mode 100644 index 0000000000..aeae2c78ce --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/ptrace.h @@ -0,0 +1,177 @@ +/* + * arch/ubicom32/include/asm/ptrace.h + * Ubicom32 architecture ptrace support. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_PTRACE_H +#define _ASM_UBICOM32_PTRACE_H + +#ifndef __ASSEMBLY__ + +/* + * We use hard coded constants because this is shared with user + * space and the values are NOT allowed to change. Only fields + * that are intended to be exposed get values. + */ +#define PT_D0 0 +#define PT_D1 4 +#define PT_D2 8 +#define PT_D3 12 +#define PT_D4 16 +#define PT_D5 20 +#define PT_D6 24 +#define PT_D7 28 +#define PT_D8 32 +#define PT_D9 36 +#define PT_D10 40 +#define PT_D11 44 +#define PT_D12 48 +#define PT_D13 52 +#define PT_D14 56 +#define PT_D15 60 +#define PT_A0 64 +#define PT_A1 68 +#define PT_A2 72 +#define PT_A3 76 +#define PT_A4 80 +#define PT_A5 84 +#define PT_A6 88 +#define PT_A7 92 +#define PT_SP 92 +#define PT_ACC0HI 96 +#define PT_ACC0LO 100 +#define PT_MAC_RC16 104 +#define PT_ACC1HI 108 +#define PT_ACC1LO 112 +#define PT_SOURCE3 116 +#define PT_INST_CNT 120 +#define PT_CSR 124 +#define PT_DUMMY_UNUSED 128 +#define PT_INT_MASK0 132 +#define PT_INT_MASK1 136 +#define PT_TRAP_CAUSE 140 +#define PT_PC 144 +#define PT_ORIGINAL_D0 148 +#define PT_FRAME_TYPE 152 + +/* + * The following 'registers' are not registers at all but are used + * locate the relocated sections. + */ +#define PT_TEXT_ADDR 200 +#define PT_TEXT_END_ADDR 204 +#define PT_DATA_ADDR 208 +#define PT_EXEC_FDPIC_LOADMAP 212 +#define PT_INTERP_FDPIC_LOADMAP 216 + +/* + * This struct defines the way the registers are stored on the + * stack during a system call. + */ +enum thread_type { + NORMAL_THREAD, + KERNEL_THREAD, +}; + +#define UBICOM32_FRAME_TYPE_SYSCALL -1 /* System call frame */ +#define UBICOM32_FRAME_TYPE_INVALID 0 /* Invalid frame, no longer in use */ +#define UBICOM32_FRAME_TYPE_INTERRUPT 1 /* Interrupt frame */ +#define UBICOM32_FRAME_TYPE_TRAP 2 /* Trap frame */ +#define UBICOM32_FRAME_TYPE_SIGTRAMP 3 /* Signal trampoline frame. */ +#define UBICOM32_FRAME_TYPE_NEW_THREAD 4 /* New Thread. */ + +struct pt_regs { + /* + * Data Registers + */ + unsigned long dn[16]; + + /* + * Address Registers + */ + unsigned long an[8]; + + /* + * Per thread misc registers. + */ + unsigned long acc0[2]; + unsigned long mac_rc16; + unsigned long acc1[2]; + unsigned long source3; + unsigned long inst_cnt; + unsigned long csr; + unsigned long dummy_unused; + unsigned long int_mask0; + unsigned long int_mask1; + unsigned long trap_cause; + unsigned long pc; + unsigned long original_dn_0; + + /* + * Frame type. Syscall frames are -1. For other types look above. + */ + unsigned long frame_type; + + /* + * These fields are not exposed to ptrace. + */ + unsigned long previous_pc; + long nesting_level; /* When the kernel in in user space this + * will be -1. */ + unsigned long thread_type; /* This indicates if this is a kernel + * thread. */ +}; + +/* + * This is the extended stack used by signal handlers and the context + * switcher: it's pushed after the normal "struct pt_regs". + */ +struct switch_stack { + unsigned long dummy; +}; + +#ifdef __KERNEL__ + +/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */ +#define PTRACE_GETREGS 12 +#define PTRACE_SETREGS 13 + +#ifndef PS_S +#define PS_S (0x2000) +#define PS_M (0x1000) +#endif + +extern int __user_mode(unsigned long sp); + +#define user_mode(regs) (__user_mode((regs->an[7]))) +#define user_stack(regs) ((regs)->an[7]) +#define instruction_pointer(regs) ((regs)->pc) +#define profile_pc(regs) instruction_pointer(regs) +extern void show_regs(struct pt_regs *); +#endif /* __KERNEL__ */ + +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_UBICOM32_PTRACE_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/range-protect-asm.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/range-protect-asm.h new file mode 100644 index 0000000000..87459e4e9d --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/range-protect-asm.h @@ -0,0 +1,91 @@ +/* + * arch/ubicom32/include/asm/range-protect-asm.h + * Assembly macros for enabling memory protection. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ + +#ifndef _ASM_UBICOM32_RANGE_PROTECT_ASM_H +#define _ASM_UBICOM32_RANGE_PROTECT_ASM_H + +#if defined(__ASSEMBLY__) + +#include <asm/thread-asm.h> + +/* + * You should only use the enable/disable ranges when you have the atomic lock, + * if you do not there will be problems. + */ + +/* + * enable_kernel_ranges + * Enable the kernel ranges (disabling protection) for thread, + * where thread == (1 << thread number) + */ +.macro enable_kernel_ranges thread +#ifdef CONFIG_PROTECT_KERNEL + or.4 I_RANGE0_EN, I_RANGE0_EN, \thread /* Enable Range Register */ + or.4 D_RANGE0_EN, D_RANGE0_EN, \thread + or.4 D_RANGE1_EN, D_RANGE1_EN, \thread +#endif +.endm + +/* + * enable_kernel_ranges_for_current + * Enable the kernel ranges (disabling protection) for this thread + */ +.macro enable_kernel_ranges_for_current scratch_reg +#ifdef CONFIG_PROTECT_KERNEL + thread_get_self_mask \scratch_reg + enable_kernel_ranges \scratch_reg +#endif +.endm + +/* + * disable_kernel_ranges + * Disables the kernel ranges (enabling protection) for thread + * where thread == (1 << thread number) + */ +.macro disable_kernel_ranges thread +#ifdef CONFIG_PROTECT_KERNEL + not.4 \thread, \thread + and.4 I_RANGE0_EN, I_RANGE0_EN, \thread /* Disable Range Register */ + and.4 D_RANGE0_EN, D_RANGE0_EN, \thread + and.4 D_RANGE1_EN, D_RANGE1_EN, \thread +#endif +.endm + +/* + * disable_kernel_ranges_for_current + * Disable kernel ranges (enabling protection) for this thread + */ +.macro disable_kernel_ranges_for_current scratch_reg +#ifdef CONFIG_PROTECT_KERNEL + thread_get_self_mask \scratch_reg + disable_kernel_ranges \scratch_reg +#endif +.endm +#endif + +#endif /* _ASM_UBICOM32_RANGE_PROTECT_ASM_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/range-protect.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/range-protect.h new file mode 100644 index 0000000000..b4bd2f043c --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/range-protect.h @@ -0,0 +1,62 @@ +/* + * arch/ubicom32/include/asm/range-protect.h + * Assembly macros declared in C for enabling memory protection. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ + +#ifndef _ASM_UBICOM32_RANGE_PROTECT_H +#define _ASM_UBICOM32_RANGE_PROTECT_H + +#if !defined(__ASSEMBLY__) +#include <asm/thread.h> +/* + * The following macros should be the identical to the ones in + * range-protect-asm.h + * + * You should only use the enable/disable ranges when you have the atomic lock, + * if you do not there will be problems. + */ + +/* + * enable_kernel_ranges + * Enable the kernel ranges (disabling protection) for thread, + * where thread == (1 << thread number) + */ +asm ( + ".macro enable_kernel_ranges thread \n\t" +#ifdef CONFIG_PROTECT_KERNEL + " or.4 I_RANGE0_EN, I_RANGE0_EN, \\thread \n\t" /* Enable Range Register */ + " or.4 D_RANGE0_EN, D_RANGE0_EN, \\thread \n\t" + " or.4 D_RANGE1_EN, D_RANGE1_EN, \\thread \n\t" +#endif + ".endm \n\t" +); + +#else /* __ASSEMBLY__ */ + +#include <asm/range-protect-asm.h> + +#endif +#endif /* _ASM_UBICOM32_RANGE_PROTECT_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/resource.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/resource.h new file mode 100644 index 0000000000..0a59a4f257 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/resource.h @@ -0,0 +1,33 @@ +/* + * arch/ubicom32/include/asm/resource.h + * Generic definitions for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_RESOURCE_H +#define _ASM_UBICOM32_RESOURCE_H + +#include <asm-generic/resource.h> + +#endif /* _ASM_UBICOM32_RESOURCE_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/ring_tio.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/ring_tio.h new file mode 100644 index 0000000000..c02a445208 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/ring_tio.h @@ -0,0 +1,42 @@ +/* + * arch/ubicom32/include/asm/ring_tio.h + * Ubicom32 architecture Ring TIO definitions. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + */ +#ifndef _ASM_UBICOM32_RING_TIO_H +#define _ASM_UBICOM32_RING_TIO_H + +#include <asm/devtree.h> + +#define RING_TIO_NODE_VERSION 2 + +/* + * Devtree node for ring + */ +struct ring_tio_node { + struct devtree_node dn; + + u32_t version; + void *regs; +}; + +extern void ring_tio_init(const char *node_name); + +#endif /* _ASM_UBICOM32_RING_TIO_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/scatterlist.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/scatterlist.h new file mode 100644 index 0000000000..4fb4df1717 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/scatterlist.h @@ -0,0 +1,49 @@ +/* + * arch/ubicom32/include/asm/scatterlist.h + * Definitions of struct scatterlist for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_SCATTERLIST_H +#define _ASM_UBICOM32_SCATTERLIST_H + +#include <linux/mm.h> +#include <asm/types.h> + +struct scatterlist { +#ifdef CONFIG_DEBUG_SG + unsigned long sg_magic; +#endif + unsigned long page_link; + unsigned int offset; + dma_addr_t dma_address; + unsigned int length; +}; + +#define sg_dma_address(sg) ((sg)->dma_address) +#define sg_dma_len(sg) ((sg)->length) + +#define ISA_DMA_THRESHOLD (0xffffffff) + +#endif /* _ASM_UBICOM32_SCATTERLIST_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/sd_tio.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/sd_tio.h new file mode 100644 index 0000000000..ecb2b8272d --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/sd_tio.h @@ -0,0 +1,36 @@ +/* + * arch/ubicom32/include/asm/sd_tio.h + * SD TIO definitions + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + */ +#ifndef _ASM_UBICOM32_SD_TIO_H +#define _ASM_UBICOM32_SD_TIO_H + +#include <asm/devtree.h> + +/* + * Devtree node for SD + */ +struct sd_tio_node { + struct devtree_node dn; + void *regs; +}; + +#endif /* _ASM_UBICOM32_SD_TIO_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/sections.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/sections.h new file mode 100644 index 0000000000..eb7d24bc21 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/sections.h @@ -0,0 +1,33 @@ +/* + * arch/ubicom32/include/asm/sections.h + * Generic sections.h definitions for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_SECTIONS_H +#define _ASM_UBICOM32_SECTIONS_H + +#include <asm-generic/sections.h> + +#endif /* _ASM_UBICOM32_SECTIONS_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/segment.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/segment.h new file mode 100644 index 0000000000..3f10490767 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/segment.h @@ -0,0 +1,78 @@ +/* + * arch/ubicom32/include/asm/segment.h + * Memory segment definitions for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_SEGMENT_H +#define _ASM_UBICOM32_SEGMENT_H + +/* define constants */ +/* Address spaces (FC0-FC2) */ +#define USER_DATA (1) +#ifndef __USER_DS +#define __USER_DS (USER_DATA) +#endif +#define USER_PROGRAM (2) +#define SUPER_DATA (5) +#ifndef __KERNEL_DS +#define __KERNEL_DS (SUPER_DATA) +#endif +#define SUPER_PROGRAM (6) +#define CPU_SPACE (7) + +#ifndef __ASSEMBLY__ + +typedef struct { + unsigned long seg; +} mm_segment_t; + +#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) +#define USER_DS MAKE_MM_SEG(__USER_DS) +#define KERNEL_DS MAKE_MM_SEG(__KERNEL_DS) + +/* + * Get/set the SFC/DFC registers for MOVES instructions + */ + +static inline mm_segment_t get_fs(void) +{ + return USER_DS; +} + +static inline mm_segment_t get_ds(void) +{ + /* return the supervisor data space code */ + return KERNEL_DS; +} + +static inline void set_fs(mm_segment_t val) +{ +} + +#define segment_eq(a,b) ((a).seg == (b).seg) + +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_UBICOM32_SEGMENT_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/semaphore-helper.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/semaphore-helper.h new file mode 100644 index 0000000000..ad0aaf0a28 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/semaphore-helper.h @@ -0,0 +1,109 @@ +/* + * arch/ubicom32/include/asm/semaphore-helper.h + * Semaphore related definitions for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_SEMAPHORE_HELPER_H +#define _ASM_UBICOM32_SEMAPHORE_HELPER_H + +/* + * SMP- and interrupt-safe semaphores helper functions. + * + * (C) Copyright 1996 Linus Torvalds + * + * m68k version by Andreas Schwab + */ + + +/* + * These two _must_ execute atomically wrt each other. + */ +static inline void wake_one_more(struct semaphore * sem) +{ + atomic_inc(&sem->waking); +} + +static inline int waking_non_zero(struct semaphore *sem) +{ + int ret; + unsigned long flags; + + spin_lock_irqsave(&semaphore_wake_lock, flags); + ret = 0; + if (atomic_read(&sem->waking) > 0) { + atomic_dec(&sem->waking); + ret = 1; + } + spin_unlock_irqrestore(&semaphore_wake_lock, flags); + return ret; +} + +/* + * waking_non_zero_interruptible: + * 1 got the lock + * 0 go to sleep + * -EINTR interrupted + */ +static inline int waking_non_zero_interruptible(struct semaphore *sem, + struct task_struct *tsk) +{ + int ret; + unsigned long flags; + + spin_lock_irqsave(&semaphore_wake_lock, flags); + ret = 0; + if (atomic_read(&sem->waking) > 0) { + atomic_dec(&sem->waking); + ret = 1; + } else if (signal_pending(tsk)) { + atomic_inc(&sem->count); + ret = -EINTR; + } + spin_unlock_irqrestore(&semaphore_wake_lock, flags); + return ret; +} + +/* + * waking_non_zero_trylock: + * 1 failed to lock + * 0 got the lock + */ +static inline int waking_non_zero_trylock(struct semaphore *sem) +{ + int ret; + unsigned long flags; + + spin_lock_irqsave(&semaphore_wake_lock, flags); + ret = 1; + if (atomic_read(&sem->waking) > 0) { + atomic_dec(&sem->waking); + ret = 0; + } else + atomic_inc(&sem->count); + spin_unlock_irqrestore(&semaphore_wake_lock, flags); + return ret; +} + +#endif /* _ASM_UBICOM32_SEMAPHORE_HELPER_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/semaphore.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/semaphore.h new file mode 100644 index 0000000000..d20ead3103 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/semaphore.h @@ -0,0 +1,140 @@ +/* + * arch/ubicom32/include/asm/semaphore.h + * Interrupt-safe semaphores for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * (C) Copyright 1996 Linus Torvalds + * m68k version by Andreas Schwab + * Copyright (C) 2004 Microtronix Datacom Ltd + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_SEMAPHORE_H +#define _ASM_UBICOM32_SEMAPHORE_H + +#define RW_LOCK_BIAS 0x01000000 + +#ifndef __ASSEMBLY__ + +#include <linux/linkage.h> +#include <linux/wait.h> +#include <linux/spinlock.h> +#include <linux/rwsem.h> + +#include <asm/system.h> +#include <asm/atomic.h> + +struct semaphore { + atomic_t count; + atomic_t waking; + wait_queue_head_t wait; +}; + +#define __SEMAPHORE_INITIALIZER(name, n) \ +{ \ + .count = ATOMIC_INIT(n), \ + .waking = ATOMIC_INIT(0), \ + .wait = __WAIT_QUEUE_HEAD_INITIALIZER((name).wait) \ +} + +#define __DECLARE_SEMAPHORE_GENERIC(name,count) \ + struct semaphore name = __SEMAPHORE_INITIALIZER(name,count) + +#define DECLARE_MUTEX(name) __DECLARE_SEMAPHORE_GENERIC(name,1) +#define DECLARE_MUTEX_LOCKED(name) __DECLARE_SEMAPHORE_GENERIC(name,0) + +static inline void sema_init (struct semaphore *sem, int val) +{ + *sem = (struct semaphore)__SEMAPHORE_INITIALIZER(*sem, val); +} + +static inline void init_MUTEX (struct semaphore *sem) +{ + sema_init(sem, 1); +} + +static inline void init_MUTEX_LOCKED (struct semaphore *sem) +{ + sema_init(sem, 0); +} + +asmlinkage void __down_failed(void /* special register calling convention */); +asmlinkage int __down_failed_interruptible(void /* params in registers */); +asmlinkage int __down_failed_trylock(void /* params in registers */); +asmlinkage void __up_wakeup(void /* special register calling convention */); + +asmlinkage void __down(struct semaphore * sem); +asmlinkage int __down_interruptible(struct semaphore * sem); +asmlinkage int __down_trylock(struct semaphore * sem); +asmlinkage void __up(struct semaphore * sem); + +extern spinlock_t semaphore_wake_lock; + +/* + * This is ugly, but we want the default case to fall through. + * "down_failed" is a special asm handler that calls the C + * routine that actually waits. + */ +static inline void down(struct semaphore * sem) +{ + might_sleep(); + + if (atomic_dec_return(&sem->count) < 0) + __down(sem); +} + +static inline int down_interruptible(struct semaphore * sem) +{ + int ret = 0; + + + might_sleep(); + + if(atomic_dec_return(&sem->count) < 0) + ret = __down_interruptible(sem); + return ret; +} + +static inline int down_trylock(struct semaphore * sem) +{ + int ret = 0; + + if (atomic_dec_return (&sem->count) < 0) + ret = __down_trylock(sem); + return ret; +} + +/* + * Note! This is subtle. We jump to wake people up only if + * the semaphore was negative (== somebody was waiting on it). + * The default case (no contention) will result in NO + * jumps for both down() and up(). + */ +static inline void up(struct semaphore * sem) +{ + if (atomic_inc_return(&sem->count) <= 0) + __up(sem); +} + +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_UBICOM32_SEMAPHORE_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/sembuf.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/sembuf.h new file mode 100644 index 0000000000..996a7a011e --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/sembuf.h @@ -0,0 +1,52 @@ +/* + * arch/ubicom32/include/asm/sembuf.h + * The semid64_ds structure for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_SEMBUF_H +#define _ASM_UBICOM32_SEMBUF_H + +/* + * The semid64_ds structure for ubicom32 architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct semid64_ds { + struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ + __kernel_time_t sem_otime; /* last semop time */ + unsigned long __unused1; + __kernel_time_t sem_ctime; /* last change time */ + unsigned long __unused2; + unsigned long sem_nsems; /* no. of semaphores in array */ + unsigned long __unused3; + unsigned long __unused4; +}; + +#endif /* _ASM_UBICOM32_SEMBUF_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/setup.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/setup.h new file mode 100644 index 0000000000..ad8dc57608 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/setup.h @@ -0,0 +1,35 @@ +/* + * arch/ubicom32/include/asm/setup.h + * Kernel command line length definition. + * + * (C) Copyright 2009, Ubicom, Inc. + * Copyright (C) 2004, Microtronix Datacom Ltd., All rights reserved. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ + +#ifndef _ASM_UBICOM32_SETUP_H +#define _ASM_UBICOM32_SETUP_H + +#define COMMAND_LINE_SIZE 512 + +#endif /* _ASM_UBICOM32_SETUP_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/shmbuf.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/shmbuf.h new file mode 100644 index 0000000000..7cc4339666 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/shmbuf.h @@ -0,0 +1,69 @@ +/* + * arch/ubicom32/include/asm/shmbuf.h + * The shmid64_ds structure for the Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_SHMBUF_H +#define _ASM_UBICOM32_SHMBUF_H + +/* + * The shmid64_ds structure for m68k architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct shmid64_ds { + struct ipc64_perm shm_perm; /* operation perms */ + size_t shm_segsz; /* size of segment (bytes) */ + __kernel_time_t shm_atime; /* last attach time */ + unsigned long __unused1; + __kernel_time_t shm_dtime; /* last detach time */ + unsigned long __unused2; + __kernel_time_t shm_ctime; /* last change time */ + unsigned long __unused3; + __kernel_pid_t shm_cpid; /* pid of creator */ + __kernel_pid_t shm_lpid; /* pid of last operator */ + unsigned long shm_nattch; /* no. of current attaches */ + unsigned long __unused4; + unsigned long __unused5; +}; + +struct shminfo64 { + unsigned long shmmax; + unsigned long shmmin; + unsigned long shmmni; + unsigned long shmseg; + unsigned long shmall; + unsigned long __unused1; + unsigned long __unused2; + unsigned long __unused3; + unsigned long __unused4; +}; + +#endif /* _ASM_UBICOM32_SHMBUF_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/shmparam.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/shmparam.h new file mode 100644 index 0000000000..851d062708 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/shmparam.h @@ -0,0 +1,35 @@ +/* + * arch/ubicom32/include/asm/shmparam.h + * Shared memory definitions for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * Copyright (C) 2004 Microtronix Datacom Ltd + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + * Alpha, ix86, M68K, Sparc, ...et al + */ +#ifndef _ASM_UBICOM32_SHMPARAM_H +#define _ASM_UBICOM32_SHMPARAM_H + +#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */ + +#endif /* _ASM_UBICOM32_SHMPARAM_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/sigcontext.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/sigcontext.h new file mode 100644 index 0000000000..8bbeb82a70 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/sigcontext.h @@ -0,0 +1,37 @@ +/* + * arch/ubicom32/include/asm/sigcontext.h + * Definition of sigcontext struct for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_SIGCONTEXT_H +#define _ASM_UBICOM32_SIGCONTEXT_H + +#include <asm/ptrace.h> + +struct sigcontext { + struct pt_regs sc_regs; +}; + +#endif /* _ASM_UBICOM32_SIGCONTEXT_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/siginfo.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/siginfo.h new file mode 100644 index 0000000000..be0a4653c3 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/siginfo.h @@ -0,0 +1,33 @@ +/* + * arch/ubicom32/include/asm/siginfo.h + * Generic siginfo.h definitions for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_SIGINFO_H +#define _ASM_UBICOM32_SIGINFO_H + +#include <asm-generic/siginfo.h> + +#endif /* _ASM_UBICOM32_SIGINFO_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/signal.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/signal.h new file mode 100644 index 0000000000..a334e19ea3 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/signal.h @@ -0,0 +1,180 @@ +/* + * arch/ubicom32/include/asm/signal.h + * Signal related definitions for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_SIGNAL_H +#define _ASM_UBICOM32_SIGNAL_H + +#include <linux/types.h> + +/* Avoid too many header ordering problems. */ +struct siginfo; + +#ifdef __KERNEL__ +/* Most things should be clean enough to redefine this at will, if care + is taken to make libc match. */ + +#define _NSIG 64 +#define _NSIG_BPW 32 +#define _NSIG_WORDS (_NSIG / _NSIG_BPW) + +typedef unsigned long old_sigset_t; /* at least 32 bits */ + +typedef struct { + unsigned long sig[_NSIG_WORDS]; +} sigset_t; + +#endif /* __KERNEL__ */ + +#define SIGHUP 1 +#define SIGINT 2 +#define SIGQUIT 3 +#define SIGILL 4 +#define SIGTRAP 5 +#define SIGABRT 6 +#define SIGIOT 6 +#define SIGBUS 7 +#define SIGFPE 8 +#define SIGKILL 9 +#define SIGUSR1 10 +#define SIGSEGV 11 +#define SIGUSR2 12 +#define SIGPIPE 13 +#define SIGALRM 14 +#define SIGTERM 15 +#define SIGSTKFLT 16 +#define SIGCHLD 17 +#define SIGCONT 18 +#define SIGSTOP 19 +#define SIGTSTP 20 +#define SIGTTIN 21 +#define SIGTTOU 22 +#define SIGURG 23 +#define SIGXCPU 24 +#define SIGXFSZ 25 +#define SIGVTALRM 26 +#define SIGPROF 27 +#define SIGWINCH 28 +#define SIGIO 29 +#define SIGPOLL SIGIO +/* +#define SIGLOST 29 +*/ +#define SIGPWR 30 +#define SIGSYS 31 +#define SIGUNUSED 31 + +/* These should not be considered constants from userland. */ +#define SIGRTMIN 32 +#define SIGRTMAX _NSIG + +/* + * SA_FLAGS values: + * + * SA_ONSTACK indicates that a registered stack_t will be used. + * SA_RESTART flag to get restarting signals (which were the default long ago) + * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. + * SA_RESETHAND clears the handler when the signal is delivered. + * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. + * SA_NODEFER prevents the current signal from being masked in the handler. + * + * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single + * Unix names RESETHAND and NODEFER respectively. + */ +#define SA_NOCLDSTOP 0x00000001 +#define SA_NOCLDWAIT 0x00000002 +#define SA_SIGINFO 0x00000004 +#define SA_ONSTACK 0x08000000 +#define SA_RESTART 0x10000000 +#define SA_NODEFER 0x40000000 +#define SA_RESETHAND 0x80000000 + +#define SA_NOMASK SA_NODEFER +#define SA_ONESHOT SA_RESETHAND + +/* + * sigaltstack controls + */ +#define SS_ONSTACK 1 +#define SS_DISABLE 2 + +#define MINSIGSTKSZ 2048 +#define SIGSTKSZ 8192 + +#include <asm-generic/signal.h> + +#ifdef __KERNEL__ +struct old_sigaction { + __sighandler_t sa_handler; + old_sigset_t sa_mask; + unsigned long sa_flags; + void (*sa_restorer)(void); +}; + +struct sigaction { + __sighandler_t sa_handler; + unsigned long sa_flags; + void (*sa_restorer)(void); + sigset_t sa_mask; /* mask last for extensibility */ +}; + +struct k_sigaction { + struct sigaction sa; +}; +#else +/* Here we must cater to libcs that poke about in kernel headers. */ + +struct sigaction { + union { + __sighandler_t _sa_handler; + void (*_sa_sigaction)(int, struct siginfo *, void *); + } _u; + sigset_t sa_mask; + unsigned long sa_flags; + void (*sa_restorer)(void); +}; + +#define sa_handler _u._sa_handler +#define sa_sigaction _u._sa_sigaction + +#endif /* __KERNEL__ */ + +typedef struct sigaltstack { + void *ss_sp; + int ss_flags; + size_t ss_size; +} stack_t; + +#ifdef __KERNEL__ + +#include <asm/sigcontext.h> +#undef __HAVE_ARCH_SIG_BITOPS + +#define ptrace_signal_deliver(regs, cookie) do { } while (0) + +#endif /* __KERNEL__ */ + +#endif /* _ASM_UBICOM32_SIGNAL_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/smp.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/smp.h new file mode 100644 index 0000000000..651a53695e --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/smp.h @@ -0,0 +1,87 @@ +/* + * arch/ubicom32/include/asm/smp.h + * SMP definitions for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_SMP_H +#define _ASM_UBICOM32_SMP_H + +#ifndef CONFIG_SMP +#error you should not include smp.h if smp is off +#endif + +#ifndef ASSEMBLY +#include <linux/bitops.h> +#include <linux/threads.h> +#include <linux/cpumask.h> +#include <asm/ip5000.h> + +typedef unsigned long address_t; +extern unsigned int smp_ipi_irq; + +/* + * This magic constant controls our willingness to transfer + * a process across CPUs. + * + * Such a transfer incurs cache and tlb + * misses. The current value is inherited from i386. Still needs + * to be tuned for parisc. + */ +#define PROC_CHANGE_PENALTY 15 /* Schedule penalty */ +#define NO_PROC_ID 0xFF /* No processor magic marker */ +#define ANY_PROC_ID 0xFF /* Any processor magic marker */ + +#ifdef CONFIG_SMP +#define raw_smp_processor_id() (current_thread_info()->cpu) +#endif /* CONFIG_SMP */ + +static inline int __cpu_disable (void) +{ + return 0; +} + +static inline void __cpu_die (unsigned int cpu) +{ + while(1) { + }; +} + +extern int __cpu_up(unsigned int cpu); +extern void smp_send_timer_all(void); +extern void smp_timer_broadcast(const struct cpumask *mask); +extern void smp_set_affinity(unsigned int irq, const struct cpumask *dest); +extern void arch_send_call_function_single_ipi(int cpu); +#define arch_send_call_function_ipi_mask arch_send_call_function_ipi_mask +extern void arch_send_call_function_ipi_mask(const struct cpumask *mask); + +/* + * TODO: Once these are fully tested, we should turn them into + * inline macros for performance. + */ +extern unsigned long smp_get_affinity(unsigned int irq, int *all); +extern void smp_reset_ipi(unsigned long mask); + +#endif /* !ASSEMBLY */ +#endif /* _ASM_UBICOM32_SMP_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/socket.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/socket.h new file mode 100644 index 0000000000..2d95c24f78 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/socket.h @@ -0,0 +1,87 @@ +/* + * arch/ubicom32/include/asm/socket.h + * Socket options definitions for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_SOCKET_H +#define _ASM_UBICOM32_SOCKET_H + +#include <asm/sockios.h> + +/* For setsockopt(2) */ +#define SOL_SOCKET 1 + +#define SO_DEBUG 1 +#define SO_REUSEADDR 2 +#define SO_TYPE 3 +#define SO_ERROR 4 +#define SO_DONTROUTE 5 +#define SO_BROADCAST 6 +#define SO_SNDBUF 7 +#define SO_RCVBUF 8 +#define SO_SNDBUFFORCE 32 +#define SO_RCVBUFFORCE 33 +#define SO_KEEPALIVE 9 +#define SO_OOBINLINE 10 +#define SO_NO_CHECK 11 +#define SO_PRIORITY 12 +#define SO_LINGER 13 +#define SO_BSDCOMPAT 14 +/* To add :#define SO_REUSEPORT 15 */ +#define SO_PASSCRED 16 +#define SO_PEERCRED 17 +#define SO_RCVLOWAT 18 +#define SO_SNDLOWAT 19 +#define SO_RCVTIMEO 20 +#define SO_SNDTIMEO 21 + +/* Security levels - as per NRL IPv6 - don't actually do anything */ +#define SO_SECURITY_AUTHENTICATION 22 +#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 +#define SO_SECURITY_ENCRYPTION_NETWORK 24 + +#define SO_BINDTODEVICE 25 + +/* Socket filtering */ +#define SO_ATTACH_FILTER 26 +#define SO_DETACH_FILTER 27 + +#define SO_PEERNAME 28 +#define SO_TIMESTAMP 29 +#define SCM_TIMESTAMP SO_TIMESTAMP + +#define SO_ACCEPTCONN 30 + +#define SO_PEERSEC 31 +#define SO_PASSSEC 34 +#define SO_TIMESTAMPNS 35 +#define SCM_TIMESTAMPNS SO_TIMESTAMPNS + +#define SO_MARK 36 + +#define SO_TIMESTAMPING 37 +#define SCM_TIMESTAMPING SO_TIMESTAMPING + +#endif /* _ASM_UBICOM32_SOCKET_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/sockios.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/sockios.h new file mode 100644 index 0000000000..5a7708d96d --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/sockios.h @@ -0,0 +1,40 @@ +/* + * arch/ubicom32/include/asm/sockios.h + * Socket-level ioctl definitions for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_SOCKIOS_H +#define _ASM_UBICOM32_SOCKIOS_H + +/* Socket-level I/O control calls. */ +#define FIOSETOWN 0x8901 +#define SIOCSPGRP 0x8902 +#define FIOGETOWN 0x8903 +#define SIOCGPGRP 0x8904 +#define SIOCATMARK 0x8905 +#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */ +#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */ + +#endif /* _ASM_UBICOM32_SOCKIOS_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/spinlock.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/spinlock.h new file mode 100644 index 0000000000..40080584c0 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/spinlock.h @@ -0,0 +1,296 @@ +/* + * arch/ubicom32/include/asm/spinlock.h + * Spinlock related definitions for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_SPINLOCK_H +#define _ASM_UBICOM32_SPINLOCK_H + +#include <asm/system.h> +#include <asm/processor.h> +#include <asm/spinlock_types.h> + +/* + * __raw_spin_lock() + * Lock the lock. + */ +static inline void __raw_spin_lock(raw_spinlock_t *x) +{ + asm volatile ( + "1: bset %0, %0, #0 \n\t" + " jmpne.f 1b \n\t" + : "+U4" (x->lock) + : + : "memory", "cc" + ); +} + +/* + * __raw_spin_unlock() + * Unlock the lock. + */ +static inline void __raw_spin_unlock(raw_spinlock_t *x) +{ + asm volatile ( + " bclr %0, %0, #0 \n\t" + : "+U4" (x->lock) + : + : "memory", "cc" + ); +} + +/* + * __raw_spin_is_locked() + * Test if the lock is locked. + */ +static inline int __raw_spin_is_locked(raw_spinlock_t *x) +{ + return x->lock; +} + +/* + * __raw_spin_unlock_wait() + * Wait for the lock to be unlocked. + * + * Note: the caller has not guarantee that the lock will not + * be acquired before they get to it. + */ +static inline void __raw_spin_unlock_wait(raw_spinlock_t *x) +{ + do { + cpu_relax(); + } while (__raw_spin_is_locked(x)); +} + +/* + * __raw_spin_trylock() + * Try the lock, return 0 on failure, 1 on success. + */ +static inline int __raw_spin_trylock(raw_spinlock_t *x) +{ + int ret = 0; + + asm volatile ( + " bset %1, %1, #0 \n\t" + " jmpne.f 1f \n\t" + " move.4 %0, #1 \n\t" + "1: \n\t" + : "+r" (ret), "+U4" (x->lock) + : + : "memory", "cc" + ); + + return ret; +} + +/* + * __raw_spin_lock_flags() + * Spin waiting for the lock (enabling IRQ(s)) + */ +static inline void __raw_spin_lock_flags(raw_spinlock_t *x, unsigned long flags) +{ + mb(); + while (!__raw_spin_trylock(x)) { + /* + * If the flags from the IRQ are set, interrupts are disabled and we + * need to re-enable them. + */ + if (!flags) { + cpu_relax(); + } else { + raw_local_irq_enable(); + cpu_relax(); + raw_local_irq_disable(); + } + } + mb(); +} + +/* + * Read-write spinlocks, allowing multiple readers but only one writer. + * Linux rwlocks are unfair to writers; they can be starved for an indefinite + * time by readers. With care, they can also be taken in interrupt context. + * + * In Ubicom32 architecture implementation, we have a spinlock and a counter. + * Readers use the lock to serialise their access to the counter (which + * records how many readers currently hold the lock). + * Writers hold the spinlock, preventing any readers or other writers from + * grabbing the rwlock. + */ + +/* + * __raw_read_lock() + * Increment the counter in the rwlock. + * + * Note that we have to ensure interrupts are disabled in case we're + * interrupted by some other code that wants to grab the same read lock + */ +static inline void __raw_read_lock(raw_rwlock_t *rw) +{ + unsigned long flags; + raw_local_irq_save(flags); + __raw_spin_lock_flags(&rw->lock, flags); + rw->counter++; + __raw_spin_unlock(&rw->lock); + raw_local_irq_restore(flags); +} + +/* + * __raw_read_unlock() + * Decrement the counter. + * + * Note that we have to ensure interrupts are disabled in case we're + * interrupted by some other code that wants to grab the same read lock + */ +static inline void __raw_read_unlock(raw_rwlock_t *rw) +{ + unsigned long flags; + raw_local_irq_save(flags); + __raw_spin_lock_flags(&rw->lock, flags); + rw->counter--; + __raw_spin_unlock(&rw->lock); + raw_local_irq_restore(flags); +} + +/* + * __raw_read_trylock() + * Increment the counter if we can. + * + * Note that we have to ensure interrupts are disabled in case we're + * interrupted by some other code that wants to grab the same read lock + */ +static inline int __raw_read_trylock(raw_rwlock_t *rw) +{ + unsigned long flags; + retry: + raw_local_irq_save(flags); + if (__raw_spin_trylock(&rw->lock)) { + rw->counter++; + __raw_spin_unlock(&rw->lock); + raw_local_irq_restore(flags); + return 1; + } + + raw_local_irq_restore(flags); + + /* + * If write-locked, we fail to acquire the lock + */ + if (rw->counter < 0) { + return 0; + } + + /* + * Wait until we have a realistic chance at the lock + */ + while (__raw_spin_is_locked(&rw->lock) && rw->counter >= 0) { + cpu_relax(); + } + + goto retry; +} + +/* + * __raw_write_lock() + * + * Note that we have to ensure interrupts are disabled in case we're + * interrupted by some other code that wants to read_trylock() this lock + */ +static inline void __raw_write_lock(raw_rwlock_t *rw) +{ + unsigned long flags; +retry: + raw_local_irq_save(flags); + __raw_spin_lock_flags(&rw->lock, flags); + + if (rw->counter != 0) { + __raw_spin_unlock(&rw->lock); + raw_local_irq_restore(flags); + + while (rw->counter != 0) + cpu_relax(); + + goto retry; + } + + rw->counter = -1; /* mark as write-locked */ + mb(); + raw_local_irq_restore(flags); +} + +static inline void __raw_write_unlock(raw_rwlock_t *rw) +{ + rw->counter = 0; + __raw_spin_unlock(&rw->lock); +} + +/* Note that we have to ensure interrupts are disabled in case we're + * interrupted by some other code that wants to read_trylock() this lock */ +static inline int __raw_write_trylock(raw_rwlock_t *rw) +{ + unsigned long flags; + int result = 0; + + raw_local_irq_save(flags); + if (__raw_spin_trylock(&rw->lock)) { + if (rw->counter == 0) { + rw->counter = -1; + result = 1; + } else { + /* Read-locked. Oh well. */ + __raw_spin_unlock(&rw->lock); + } + } + raw_local_irq_restore(flags); + + return result; +} + +/* + * read_can_lock - would read_trylock() succeed? + * @lock: the rwlock in question. + */ +static inline int __raw_read_can_lock(raw_rwlock_t *rw) +{ + return rw->counter >= 0; +} + +/* + * write_can_lock - would write_trylock() succeed? + * @lock: the rwlock in question. + */ +static inline int __raw_write_can_lock(raw_rwlock_t *rw) +{ + return !rw->counter; +} + +#define __raw_read_lock_flags(lock, flags) __raw_read_lock(lock) +#define __raw_write_lock_flags(lock, flags) __raw_write_lock(lock) + +#define _raw_spin_relax(lock) cpu_relax() +#define _raw_read_relax(lock) cpu_relax() +#define _raw_write_relax(lock) cpu_relax() + +#endif /* _ASM_UBICOM32_SPINLOCK_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/spinlock_types.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/spinlock_types.h new file mode 100644 index 0000000000..3745bca63f --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/spinlock_types.h @@ -0,0 +1,43 @@ +/* + * arch/ubicom32/include/asm/spinlock_types.h + * Spinlock related structure definitions for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_SPINLOCK_TYPES_H +#define _ASM_UBICOM32_SPINLOCK_TYPES_H + +typedef struct { + volatile unsigned int lock; +} raw_spinlock_t; + +typedef struct { + raw_spinlock_t lock; + volatile int counter; +} raw_rwlock_t; + +#define __RAW_SPIN_LOCK_UNLOCKED { 0 } +#define __RAW_RW_LOCK_UNLOCKED { __RAW_SPIN_LOCK_UNLOCKED, 0 } + +#endif /* _ASM_UBICOM32_SPINLOCK_TYPES_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/stacktrace.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/stacktrace.h new file mode 100644 index 0000000000..f278ac7b5c --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/stacktrace.h @@ -0,0 +1,72 @@ +/* + * arch/ubicom32/include/asm/stacktrace.h + * Stacktrace functions for the Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_STACKTRACE_H +#define _ASM_UBICOM32_STACKTRACE_H + +#define between(a, b, c) (( \ + ((unsigned long) a) >= ((unsigned long) b)) && \ + (((unsigned long)a) <= ((unsigned long)c))) + +/* + * These symbols are filled in by the linker. + */ +extern unsigned long _stext; +extern unsigned long _etext; + +/* OCM text goes from __ocm_text_run_begin to __data_begin */ +extern unsigned long __ocm_text_run_begin; +extern unsigned long __data_begin; + +/* Account for OCM case - see stacktrace.c maybe combine(also trap.c) */ +/* + * ubicom32_is_kernel() + * + * Check to see if the given address belongs to the kernel. + * NOMMU does not permit any other means. + */ +static inline int ubicom32_is_kernel(unsigned long addr) +{ + int is_kernel = between(addr, &_stext, &_etext) || \ + between(addr, &__ocm_text_run_begin, &__data_begin); + +#ifdef CONFIG_MODULES + if (!is_kernel) + is_kernel = is_module_address(addr); +#endif + return is_kernel; +} + +extern unsigned long stacktrace_iterate( + unsigned long **trace, + unsigned long stext, unsigned long etext, + unsigned long ocm_stext, unsigned long ocm_etext, + unsigned long sstack, unsigned long estack); +#ifdef CONFIG_STACKTRACE +void stacktrace_save_entries(struct task_struct *tsk, struct stack_trace *trace, unsigned long sp); +#endif +#endif /* _ASM_UBICOM32_STACKTRACE_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/stat.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/stat.h new file mode 100644 index 0000000000..e333c60e61 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/stat.h @@ -0,0 +1,104 @@ +/* + * arch/ubicom32/include/asm/stat.h + * File status definitions for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_STAT_H +#define _ASM_UBICOM32_STAT_H + +struct __old_kernel_stat { + unsigned short st_dev; + unsigned short st_ino; + unsigned short st_mode; + unsigned short st_nlink; + unsigned short st_uid; + unsigned short st_gid; + unsigned short st_rdev; + unsigned long st_size; + unsigned long st_atime; + unsigned long st_mtime; + unsigned long st_ctime; +}; + +struct stat { + unsigned short st_dev; + unsigned short __pad1; + unsigned long st_ino; + unsigned short st_mode; + unsigned short st_nlink; + unsigned short st_uid; + unsigned short st_gid; + unsigned short st_rdev; + unsigned short __pad2; + unsigned long st_size; + unsigned long st_blksize; + unsigned long st_blocks; + unsigned long st_atime; + unsigned long __unused1; + unsigned long st_mtime; + unsigned long __unused2; + unsigned long st_ctime; + unsigned long __unused3; + unsigned long __unused4; + unsigned long __unused5; +}; + +/* This matches struct stat64 in glibc2.1, hence the absolutely + * insane amounts of padding around dev_t's. + */ +struct stat64 { + unsigned long long st_dev; + unsigned char __pad1[2]; + +#define STAT64_HAS_BROKEN_ST_INO 1 + unsigned long __st_ino; + + unsigned int st_mode; + unsigned int st_nlink; + + unsigned long st_uid; + unsigned long st_gid; + + unsigned long long st_rdev; + unsigned char __pad3[2]; + + long long st_size; + unsigned long st_blksize; + + unsigned long long st_blocks; /* Number 512-byte blocks allocated. */ + + unsigned long st_atime; + unsigned long st_atime_nsec; + + unsigned long st_mtime; + unsigned long st_mtime_nsec; + + unsigned long st_ctime; + unsigned long st_ctime_nsec; + + unsigned long long st_ino; +}; + +#endif /* _ASM_UBICOM32_STAT_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/statfs.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/statfs.h new file mode 100644 index 0000000000..15890d436d --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/statfs.h @@ -0,0 +1,33 @@ +/* + * arch/ubicom32/include/asm/statfs.h + * Generic statfs.h definitions + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_STATFS_H +#define _ASM_UBICOM32_STATFS_H + +#include <asm-generic/statfs.h> + +#endif /* _ASM_UBICOM32_STATFS_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/string.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/string.h new file mode 100644 index 0000000000..7f24bf593b --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/string.h @@ -0,0 +1,40 @@ +/* + * arch/ubicom32/include/asm/string.h + * String operation definitions for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_STRING_H +#define _ASM_UBICOM32_STRING_H + +#define __HAVE_ARCH_MEMSET +extern void *memset(void *b, int c, size_t len); + +#define __HAVE_ARCH_MEMCPY +extern void *memcpy(void *to, const void *from, size_t len); + +#define __HAVE_ARCH_MEMMOVE +extern void * memmove(void *to, const void *from, size_t len); + +#endif /* _ASM_UBICOM32_STRING_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/swab.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/swab.h new file mode 100644 index 0000000000..180a50311a --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/swab.h @@ -0,0 +1,45 @@ +/* + * arch/ubicom32/include/asm/byteorder.h + * Byte order swapping utility routines. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_BYTEORDER_H +#define _ASM_UBICOM32_BYTEORDER_H + +#include <linux/types.h> + +#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__) +# define __BYTEORDER_HAS_U64__ +# define __SWAB_64_THRU_32__ +#endif + +#if defined(IP7000) || defined(IP7000_REV2) + +#define __arch__swab16 __builtin_ubicom32_swapb_2 +#define __arch__swab32 __builtin_ubicom32_swapb_4 + +#endif /* IP7000 */ + +#endif /* _ASM_UBICOM32_BYTEORDER_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/switch-dev.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/switch-dev.h new file mode 100644 index 0000000000..ed67e94aad --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/switch-dev.h @@ -0,0 +1,51 @@ +/* + * arch/ubicom32/include/asm/switch-dev.h + * generic Ethernet switch platform data definitions for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_SWITCH_DEV_H +#define _ASM_UBICOM32_SWITCH_DEV_H + +#define SWITCH_DEV_FLAG_HW_RESET 0x01 +#define SWITCH_DEV_FLAG_SW_RESET 0x02 + +struct switch_core_platform_data { + /* + * See flags above + */ + u32_t flags; + + /* + * GPIO to use for nReset + */ + int pin_reset; + + /* + * Name of this switch + */ + const char *name; +}; + +#endif /* _ASM_UBICOM32_SWITCH_DEV_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/system.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/system.h new file mode 100644 index 0000000000..c3ec6083e9 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/system.h @@ -0,0 +1,101 @@ +/* + * arch/ubicom32/include/asm/system.h + * Low level switching definitions. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_SYSTEM_H +#define _ASM_UBICOM32_SYSTEM_H + +#include <linux/irqflags.h> +#include <linux/linkage.h> +#include <asm/segment.h> +#include <asm/entry.h> +#include <asm/ldsr.h> +#include <asm/irq.h> +#include <asm/percpu.h> +#include <asm/ubicom32-common.h> +#include <asm/processor.h> + +/* + * switch_to(n) should switch tasks to task ptr, first checking that + * ptr isn't the current task, in which case it does nothing. + */ +asmlinkage void resume(void); +extern void *__switch_to(struct task_struct *prev, + struct thread_struct *prev_switch, + struct thread_struct *next_switch); + +/* + * We will need a per linux thread sw_ksp for the switch_to macro to + * track the kernel stack pointer for the current thread on that linux thread. + */ +#define switch_to(prev,next,last) \ +({ \ + void *_last; \ + _last = (void *) \ + __switch_to(prev, &prev->thread, &next->thread); \ + (last) = _last; \ +}) + +/* + * Force strict CPU ordering. + * Not really required on ubicom32... + */ +#define nop() asm volatile ("nop"::) +#define mb() asm volatile ("" : : :"memory") +#define rmb() asm volatile ("" : : :"memory") +#define wmb() asm volatile ("" : : :"memory") +#define set_mb(var, value) ({ (var) = (value); wmb(); }) + +#ifdef CONFIG_SMP +#define smp_mb() mb() +#define smp_rmb() rmb() +#define smp_wmb() wmb() +#define smp_read_barrier_depends() read_barrier_depends() +#else +#define smp_mb() mb() +#define smp_rmb() rmb() +#define smp_wmb() wmb() +#define smp_read_barrier_depends() do { } while(0) +#endif + +#define read_barrier_depends() ((void)0) + +/* + * The following defines change how the scheduler calls the switch_to() + * macro. + * + * 1) The first causes the runqueue to be unlocked on entry to + * switch_to(). Since our ctx code does not play with the runqueue + * we do not need it unlocked. + * + * 2) The later turns interrupts on during a ctxsw to reduce the latency of + * interrupts during ctx. At this point in the port, we believe that this + * latency is not a problem since we have very little code to perform a ctxsw. + */ +// #define __ARCH_WANT_UNLOCKED_CTXSW +// #define __ARCH_WANT_INTERRUPTS_ON_CTXSW + +#endif /* _ASM_UBICOM32_SYSTEM_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/termbits.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/termbits.h new file mode 100644 index 0000000000..a7b3381f86 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/termbits.h @@ -0,0 +1,227 @@ +/* + * arch/ubicom32/include/asm/termbits.h + * Terminal/serial port definitions for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_TERMBITS_H +#define _ASM_UBICOM32_TERMBITS_H + +#include <linux/posix_types.h> + +typedef unsigned char cc_t; +typedef unsigned int speed_t; +typedef unsigned int tcflag_t; + +#define NCCS 19 +struct termios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ +}; + +struct termios2 { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + +struct ktermios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + +/* c_cc characters */ +#define VINTR 0 +#define VQUIT 1 +#define VERASE 2 +#define VKILL 3 +#define VEOF 4 +#define VTIME 5 +#define VMIN 6 +#define VSWTC 7 +#define VSTART 8 +#define VSTOP 9 +#define VSUSP 10 +#define VEOL 11 +#define VREPRINT 12 +#define VDISCARD 13 +#define VWERASE 14 +#define VLNEXT 15 +#define VEOL2 16 + + +/* c_iflag bits */ +#define IGNBRK 0000001 +#define BRKINT 0000002 +#define IGNPAR 0000004 +#define PARMRK 0000010 +#define INPCK 0000020 +#define ISTRIP 0000040 +#define INLCR 0000100 +#define IGNCR 0000200 +#define ICRNL 0000400 +#define IUCLC 0001000 +#define IXON 0002000 +#define IXANY 0004000 +#define IXOFF 0010000 +#define IMAXBEL 0020000 +#define IUTF8 0040000 + +/* c_oflag bits */ +#define OPOST 0000001 +#define OLCUC 0000002 +#define ONLCR 0000004 +#define OCRNL 0000010 +#define ONOCR 0000020 +#define ONLRET 0000040 +#define OFILL 0000100 +#define OFDEL 0000200 +#define NLDLY 0000400 +#define NL0 0000000 +#define NL1 0000400 +#define CRDLY 0003000 +#define CR0 0000000 +#define CR1 0001000 +#define CR2 0002000 +#define CR3 0003000 +#define TABDLY 0014000 +#define TAB0 0000000 +#define TAB1 0004000 +#define TAB2 0010000 +#define TAB3 0014000 +#define XTABS 0014000 +#define BSDLY 0020000 +#define BS0 0000000 +#define BS1 0020000 +#define VTDLY 0040000 +#define VT0 0000000 +#define VT1 0040000 +#define FFDLY 0100000 +#define FF0 0000000 +#define FF1 0100000 + +/* c_cflag bit meaning */ +#define CBAUD 0010017 +#define B0 0000000 /* hang up */ +#define B50 0000001 +#define B75 0000002 +#define B110 0000003 +#define B134 0000004 +#define B150 0000005 +#define B200 0000006 +#define B300 0000007 +#define B600 0000010 +#define B1200 0000011 +#define B1800 0000012 +#define B2400 0000013 +#define B4800 0000014 +#define B9600 0000015 +#define B19200 0000016 +#define B38400 0000017 +#define EXTA B19200 +#define EXTB B38400 +#define CSIZE 0000060 +#define CS5 0000000 +#define CS6 0000020 +#define CS7 0000040 +#define CS8 0000060 +#define CSTOPB 0000100 +#define CREAD 0000200 +#define PARENB 0000400 +#define PARODD 0001000 +#define HUPCL 0002000 +#define CLOCAL 0004000 +#define CBAUDEX 0010000 +#define BOTHER 0010000 +#define B57600 0010001 +#define B115200 0010002 +#define B230400 0010003 +#define B460800 0010004 +#define B500000 0010005 +#define B576000 0010006 +#define B921600 0010007 +#define B1000000 0010010 +#define B1152000 0010011 +#define B1500000 0010012 +#define B2000000 0010013 +#define B2500000 0010014 +#define B3000000 0010015 +#define B3500000 0010016 +#define B4000000 0010017 +#define CIBAUD 002003600000 /* input baud rate */ +#define CMSPAR 010000000000 /* mark or space (stick) parity */ +#define CRTSCTS 020000000000 /* flow control */ + +#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ + +/* c_lflag bits */ +#define ISIG 0000001 +#define ICANON 0000002 +#define XCASE 0000004 +#define ECHO 0000010 +#define ECHOE 0000020 +#define ECHOK 0000040 +#define ECHONL 0000100 +#define NOFLSH 0000200 +#define TOSTOP 0000400 +#define ECHOCTL 0001000 +#define ECHOPRT 0002000 +#define ECHOKE 0004000 +#define FLUSHO 0010000 +#define PENDIN 0040000 +#define IEXTEN 0100000 + + +/* tcflow() and TCXONC use these */ +#define TCOOFF 0 +#define TCOON 1 +#define TCIOFF 2 +#define TCION 3 + +/* tcflush() and TCFLSH use these */ +#define TCIFLUSH 0 +#define TCOFLUSH 1 +#define TCIOFLUSH 2 + +/* tcsetattr uses these */ +#define TCSANOW 0 +#define TCSADRAIN 1 +#define TCSAFLUSH 2 + +#endif /* _ASM_UBICOM32_TERMBITS_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/termios.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/termios.h new file mode 100644 index 0000000000..5c16fe7e9b --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/termios.h @@ -0,0 +1,119 @@ +/* + * arch/ubicom32/include/asm/termios.h + * Ubicom32 termio definitions. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_TERMIOS_H +#define _ASM_UBICOM32_TERMIOS_H + +#include <asm/termbits.h> +#include <asm/ioctls.h> + +struct winsize { + unsigned short ws_row; + unsigned short ws_col; + unsigned short ws_xpixel; + unsigned short ws_ypixel; +}; + +#define NCC 8 +struct termio { + unsigned short c_iflag; /* input mode flags */ + unsigned short c_oflag; /* output mode flags */ + unsigned short c_cflag; /* control mode flags */ + unsigned short c_lflag; /* local mode flags */ + unsigned char c_line; /* line discipline */ + unsigned char c_cc[NCC]; /* control characters */ +}; + +#ifdef __KERNEL__ +/* intr=^C quit=^| erase=del kill=^U + eof=^D vtime=\0 vmin=\1 sxtc=\0 + start=^Q stop=^S susp=^Z eol=\0 + reprint=^R discard=^U werase=^W lnext=^V + eol2=\0 +*/ +#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" +#endif + +/* modem lines */ +#define TIOCM_LE 0x001 +#define TIOCM_DTR 0x002 +#define TIOCM_RTS 0x004 +#define TIOCM_ST 0x008 +#define TIOCM_SR 0x010 +#define TIOCM_CTS 0x020 +#define TIOCM_CAR 0x040 +#define TIOCM_RNG 0x080 +#define TIOCM_DSR 0x100 +#define TIOCM_CD TIOCM_CAR +#define TIOCM_RI TIOCM_RNG +#define TIOCM_OUT1 0x2000 +#define TIOCM_OUT2 0x4000 +#define TIOCM_LOOP 0x8000 + +/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ + +#ifdef __KERNEL__ + +/* + * Translate a "termio" structure into a "termios". Ugh. + */ +#define user_termio_to_kernel_termios(termios, termio) \ +({ \ + unsigned short tmp; \ + get_user(tmp, &(termio)->c_iflag); \ + (termios)->c_iflag = (0xffff0000 & ((termios)->c_iflag)) | tmp; \ + get_user(tmp, &(termio)->c_oflag); \ + (termios)->c_oflag = (0xffff0000 & ((termios)->c_oflag)) | tmp; \ + get_user(tmp, &(termio)->c_cflag); \ + (termios)->c_cflag = (0xffff0000 & ((termios)->c_cflag)) | tmp; \ + get_user(tmp, &(termio)->c_lflag); \ + (termios)->c_lflag = (0xffff0000 & ((termios)->c_lflag)) | tmp; \ + get_user((termios)->c_line, &(termio)->c_line); \ + copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \ +}) + +/* + * Translate a "termios" structure into a "termio". Ugh. + */ +#define kernel_termios_to_user_termio(termio, termios) \ +({ \ + put_user((termios)->c_iflag, &(termio)->c_iflag); \ + put_user((termios)->c_oflag, &(termio)->c_oflag); \ + put_user((termios)->c_cflag, &(termio)->c_cflag); \ + put_user((termios)->c_lflag, &(termio)->c_lflag); \ + put_user((termios)->c_line, &(termio)->c_line); \ + copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \ +}) + +#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2)) +#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2)) +#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios)) +#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios)) + +#endif /* __KERNEL__ */ + +#endif /* _ASM_UBICOM32_TERMIOS_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/thread-asm.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/thread-asm.h new file mode 100644 index 0000000000..f9566037e5 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/thread-asm.h @@ -0,0 +1,51 @@ +/* + * arch/ubicom32/include/asm/thread-asm.h + * Ubicom32 architecture specific thread definitions. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_THREAD_ASM_H +#define _ASM_UBICOM32_THREAD_ASM_H + +/* + * thread_get_self + * Read and shift the current thread into reg + * + * Note that we don't need to mask the result as bits 6 through 31 of the + * ROSR are zeroes. + */ +.macro thread_get_self reg + lsr.4 \reg, ROSR, #2 +.endm + +/* + * thread_get_self_mask + * Read and shift the current thread mask into reg + */ +.macro thread_get_self_mask reg + lsr.4 \reg, ROSR, #2 + lsl.4 \reg, #1, \reg /* Thread bit */ +.endm + +#endif /* _ASM_UBICOM32_THREAD_ASM_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/thread.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/thread.h new file mode 100644 index 0000000000..69c925ea47 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/thread.h @@ -0,0 +1,320 @@ +/* + * arch/ubicom32/include/asm/thread.h + * Ubicom32 architecture specific thread definitions. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_THREAD_H +#define _ASM_UBICOM32_THREAD_H + +#if !defined(__ASSEMBLY__) + +#include <asm/ptrace.h> +#include <asm/ubicom32-common.h> + +typedef int thread_t; +typedef unsigned char thread_type_t; +typedef void (*thread_exec_fn_t)(void *arg); + +#define THREAD_NULL 0x40 +#define THREAD_TYPE_HRT (1 << 0) +#define THREAD_TYPE_SPECIAL 0 +#define THREAD_TYPE_NORMAL 0 +#define THREAD_TYPE_BACKGROUND (1 << 1) + +/* + * This is the upper bound on the maximum hardware threads that one will find + * on a Ubicom processor. It is used to size per hardware thread data structures. + */ +#define THREAD_ARCHITECTURAL_MAX 16 + +/* + * TODO: Rename this at some point to be thread_ + */ +extern unsigned int sw_ksp[THREAD_ARCHITECTURAL_MAX]; + + +/* + * thread_get_self() + */ +static inline thread_t thread_get_self(void) +{ + thread_t result; + + /* + * Note that ROSR has zeroes in bits 6 through 31 and so we don't need + * to do any additional bit masking here. + */ + asm ( + "lsr.4 %0, ROSR, #2 \n\t" + : "=d" (result) + : + : "cc" + ); + + return result; +} + +/* + * thread_suspend() + */ +static inline void thread_suspend(void) +{ + asm volatile ( + "suspend\n\t" + : + : + ); +} + +/* + * thread_resume() + */ +static inline void thread_resume(thread_t thread) +{ + asm volatile ( + "move.4 MT_ACTIVE_SET, %0 \n\t" + "pipe_flush 0 \n\t" + "pipe_flush 0 \n\t" + : + : "d" (1 << thread) + ); +} + + + +/* + * thread_enable_mask() + * Enable all threads in the mask. + * + * All writes to MT_EN must be protected by the MT_EN_LOCK bit + */ +static inline void thread_enable_mask(unsigned int mask) +{ + /* + * must flush the pipeline twice. + * first pipe_flush is to ensure write to MT_EN is completed + * second one is to ensure any new instructions from + * the targeted thread (the one being disabled), that + * are issued while the write to MT_EN is being executed, + * are completed. + */ + UBICOM32_LOCK(MT_EN_LOCK_BIT); + asm volatile ( + "or.4 MT_EN, MT_EN, %0 \n\t" + "pipe_flush 0 \n\t" + "pipe_flush 0 \n\t" + : + : "d" (mask) + : "cc" + ); + UBICOM32_UNLOCK(MT_EN_LOCK_BIT); +} + +/* + * thread_enable() + */ +static inline void thread_enable(thread_t thread) +{ + thread_enable_mask(1 << thread); +} + +/* + * thread_disable_mask() + * Disable all threads in the mask. + * + * All writes to MT_EN must be protected by the MT_EN_LOCK bit + */ +static inline void thread_disable_mask(unsigned int mask) +{ + /* + * must flush the pipeline twice. + * first pipe_flush is to ensure write to MT_EN is completed + * second one is to ensure any new instructions from + * the targeted thread (the one being disabled), that + * are issued while the write to MT_EN is being executed, + * are completed. + */ + UBICOM32_LOCK(MT_EN_LOCK_BIT); + asm volatile ( + "and.4 MT_EN, MT_EN, %0 \n\t" + "pipe_flush 0 \n\t" + "pipe_flush 0 \n\t" + : + : "d" (~mask) + : "cc" + ); + UBICOM32_UNLOCK(MT_EN_LOCK_BIT); +} + +/* + * thread_disable() + */ +static inline void thread_disable(thread_t thread) +{ + thread_disable_mask(1 << thread); +} + +/* + * thread_disable_others() + * Disable all other threads + */ +static inline void thread_disable_others(void) +{ + thread_t self = thread_get_self(); + thread_disable_mask(~(1 << self)); +} + +/* + * thread_is_trapped() + * Is the specified tid trapped? + */ +static inline int thread_is_trapped(thread_t tid) +{ + int thread_mask = (1 << tid); + int trap_thread; + + asm ( + "move.4 %0, MT_TRAP \n\t" + : "=d" (trap_thread) + : + ); + return (trap_thread & thread_mask); +} + +/* + * thread_is_enabled() + * Is the specified tid enabled? + */ +static inline int thread_is_enabled(thread_t tid) +{ + int thread_mask = (1 << tid); + int enabled_threads; + + asm ( + "move.4 %0, MT_EN \n\t" + : "=d" (enabled_threads) + : + ); + return (enabled_threads & thread_mask); +} + +/* + * thread_get_instruction_count() + */ +static inline unsigned int thread_get_instruction_count(void) +{ + unsigned int result; + asm ( + "move.4 %0, INST_CNT \n\t" + : "=r" (result) + ); + return result; +} + +/* + * thread_get_pc() + * pc could point to a speculative and cancelled instruction unless thread is disabled + */ +static inline void *thread_get_pc(thread_t thread) +{ + void *result; + asm ( + "move.4 csr, %1 \n\t" + "setcsr_flush 0 \n\t" + "move.4 %0, pc \n\t" + "move.4 csr, #0 \n\t" + "setcsr_flush 0 \n\t" + : "=r" (result) + : "r" ((thread << 9) | (1 << 8)) + ); + return result; +} + +/* + * thread_get_trap_cause() + * This should be called only when the thread is not running + */ +static inline unsigned int thread_get_trap_cause(thread_t thread) +{ + unsigned int result; + asm ( + "move.4 csr, %1 \n\t" + "setcsr_flush 0 \n\t" + "move.4 %0, trap_cause \n\t" + "move.4 csr, #0 \n\t" + "setcsr_flush 0 \n\t" + : "=r" (result) + : "r" ((thread << 9) | (1 << 8)) + ); + return result; +} + +/* + * THREAD_STALL macro. + */ +#define THREAD_STALL \ + asm volatile ( \ + "move.4 mt_dbg_active_clr, #-1 \n\t" \ + "pipe_flush 0 \n\t" \ + : \ + : \ + ) + +extern unsigned int thread_get_mainline(void); +extern void thread_set_mainline(thread_t tid); +extern thread_t thread_alloc(void); +extern thread_t thread_start(thread_t thread, thread_exec_fn_t exec, void *arg, unsigned int *sp_high, thread_type_t type); + +/* + * asm macros + */ +asm ( +/* + * thread_get_self + * Read and shift the current thread into reg + * + * Note that we don't need to mask the result as bits 6 through 31 of the + * ROSR are zeroes. + */ +".macro thread_get_self reg \n\t" +" lsr.4 \\reg, ROSR, #2 \n\t" +".endm \n\t" + +/* + * thread_get_self_mask + * Read and shift the current thread mask into reg + */ +".macro thread_get_self_mask reg \n\t" +" lsr.4 \\reg, ROSR, #2 \n\t" +" lsl.4 \\reg, #1, \\reg \n\t" /* Thread bit */ +".endm \n\t" +); + +#else /* __ASSEMBLY__ */ + +#include <asm/thread-asm.h> + +#endif /* __ASSEMBLY__ */ +#endif /* _ASM_UBICOM32_THREAD_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/thread_info.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/thread_info.h new file mode 100644 index 0000000000..55c69dadd7 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/thread_info.h @@ -0,0 +1,134 @@ +/* + * arch/ubicom32/include/asm/thread_info.h + * Ubicom32 architecture low-level thread information. + * + * (C) Copyright 2009, Ubicom, Inc. + * Adapted from the i386 and PPC versions by Greg Ungerer (gerg@snapgear.com) + * Copyright (C) 2002 David Howells (dhowells@redhat.com) + * - Incorporating suggestions made by Linus Torvalds and Dave Miller + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ + +#ifndef _ASM_UBICOM32_THREAD_INFO_H +#define _ASM_UBICOM32_THREAD_INFO_H + +#include <asm/page.h> + +/* + * Size of kernel stack for each process. This must be a power of 2... + */ +#ifdef CONFIG_4KSTACKS +#define THREAD_SIZE_ORDER (0) +#else +#define THREAD_SIZE_ORDER (1) +#endif + +/* + * for asm files, THREAD_SIZE is now generated by asm-offsets.c + */ +#define THREAD_SIZE (PAGE_SIZE<<THREAD_SIZE_ORDER) + +#ifdef __KERNEL__ + +#ifndef __ASSEMBLY__ + +/* + * low level task data. + */ +struct thread_info { + struct task_struct *task; /* main task structure */ + struct exec_domain *exec_domain; /* execution domain */ + unsigned long flags; /* low level flags */ + int cpu; /* cpu we're on */ + int preempt_count; /* 0 => preemptable, <0 => BUG */ + int interrupt_nesting; /* Interrupt nesting level. */ + struct restart_block restart_block; +}; + +/* + * macros/functions for gaining access to the thread information structure + */ +#define INIT_THREAD_INFO(tsk) \ +{ \ + .task = &tsk, \ + .exec_domain = &default_exec_domain, \ + .flags = 0, \ + .cpu = 0, \ + .interrupt_nesting = 0, \ + .restart_block = { \ + .fn = do_no_restart_syscall, \ + }, \ +} + +#define init_thread_info (init_thread_union.thread_info) +#define init_stack (init_thread_union.stack) + + +/* how to get the thread information struct from C */ +static inline struct thread_info *current_thread_info(void) +{ + struct thread_info *ti; + + asm ( + "and.4 %0, sp, %1\n\t" + : "=&r" (ti) + : "d" (~(THREAD_SIZE-1)) + : "cc" + ); + + return ti; +} + +#define STACK_WARN (THREAD_SIZE / 8) + +#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR 1 + +/* thread information allocation */ +#define alloc_thread_info(tsk) ((struct thread_info *) \ + __get_free_pages(GFP_KERNEL, THREAD_SIZE_ORDER)) +#define free_thread_info(ti) free_pages((unsigned long) (ti), THREAD_SIZE_ORDER) +#endif /* __ASSEMBLY__ */ + +#define PREEMPT_ACTIVE 0x4000000 + +/* + * thread information flag bit numbers + */ +#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ +#define TIF_SIGPENDING 1 /* signal pending */ +#define TIF_NEED_RESCHED 2 /* rescheduling necessary */ +#define TIF_POLLING_NRFLAG 3 /* true if poll_idle() is polling + TIF_NEED_RESCHED */ +#define TIF_MEMDIE 4 + +/* as above, but as bit values */ +#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE) +#define _TIF_SIGPENDING (1<<TIF_SIGPENDING) +#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED) +#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG) + +#define _TIF_WORK_MASK 0x0000FFFE /* work to do on interrupt/exception return */ + +#endif /* __KERNEL__ */ + +#endif /* _ASM_UBICOM32_THREAD_INFO_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/timex.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/timex.h new file mode 100644 index 0000000000..93ee3db05c --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/timex.h @@ -0,0 +1,56 @@ +/* + * arch/ubicom32/include/asm/timex.h + * Ubicom32 architecture timex specifications. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_TIMEX_H +#define _ASM_UBICOM32_TIMEX_H + +#define CLOCK_TICK_RATE 266000000 + +// #define ARCH_HAS_READ_CURRENT_TIMER + +typedef unsigned long cycles_t; + +static inline cycles_t get_cycles(void) +{ + return 0; +} + +extern int timer_alloc(void); +extern void timer_set(int timervector, unsigned int cycles); +extern int timer_reset(int timervector, unsigned int cycles); +extern void timer_tick_init(void); +extern void timer_device_init(void); + +#if defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST) +extern void local_timer_interrupt(void); +#endif + +#if defined(CONFIG_LOCAL_TIMERS) || defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST) +extern int local_timer_setup(unsigned int cpu); +#endif + +#endif /* _ASM_UBICOM32_TIMEX_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/tlb.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/tlb.h new file mode 100644 index 0000000000..cd45996d57 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/tlb.h @@ -0,0 +1,47 @@ +/* + * arch/ubicom32/include/asm/tlb.h + * Ubicom32 architecture TLB operations. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_TLB_H +#define _ASM_UBICOM32_TLB_H + +/* + * ubicom32 doesn't need any special per-pte or + * per-vma handling.. + */ +#define tlb_start_vma(tlb, vma) do { } while (0) +#define tlb_end_vma(tlb, vma) do { } while (0) +#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0) + +/* + * .. because we flush the whole mm when it + * fills up. + */ +#define tlb_flush(tlb) + +#include <asm-generic/tlb.h> + +#endif /* _ASM_UBICOM32_TLB_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/tlbflush.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/tlbflush.h new file mode 100644 index 0000000000..0317aca8d0 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/tlbflush.h @@ -0,0 +1,79 @@ +/* + * arch/ubicom32/include/asm/tlbflush.h + * TLB operations for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * Copyright (C) 2000 Lineo, David McCullough <davidm@uclinux.org> + * Copyright (C) 2000-2002, Greg Ungerer <gerg@snapgear.com> + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_TLB_FLUSH_H +#define _ASM_UBICOM32_TLB_FLUSH_H + +#include <asm/setup.h> + +/* + * flush all user-space atc entries. + */ +static inline void __flush_tlb(void) +{ + BUG(); +} + +static inline void __flush_tlb_one(unsigned long addr) +{ + BUG(); +} + +#define flush_tlb() __flush_tlb() + +/* + * flush all atc entries (both kernel and user-space entries). + */ +static inline void flush_tlb_all(void) +{ + BUG(); +} + +static inline void flush_tlb_mm(struct mm_struct *mm) +{ + BUG(); +} + +static inline void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr) +{ + BUG(); +} + +static inline void flush_tlb_range(struct mm_struct *mm, + unsigned long start, unsigned long end) +{ + BUG(); +} + +static inline void flush_tlb_kernel_page(unsigned long addr) +{ + BUG(); +} + +#endif /* _ASM_UBICOM32_TLB_FLUSH_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/topology.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/topology.h new file mode 100644 index 0000000000..b4de1437dc --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/topology.h @@ -0,0 +1,33 @@ +/* + * arch/ubicom32/include/asm/topology.h + * Generic topology.h definitions for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_TOPOLOGY_H +#define _ASM_UBICOM32_TOPOLOGY_H + +#include <asm-generic/topology.h> + +#endif /* _ASM_UBICOM32_TOPOLOGY_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/traps.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/traps.h new file mode 100644 index 0000000000..9edcca9b5b --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/traps.h @@ -0,0 +1,55 @@ +/* + * arch/ubicom32/include/asm/traps.h + * Trap related definitions for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ + +#ifndef _ASM_UBICOM32_TRAPS_H +#define _ASM_UBICOM32_TRAPS_H + +/* + * Trap causes passed from ultra to Host OS + */ +#define TRAP_CAUSE_TOTAL 13 +#define TRAP_CAUSE_DST_RANGE_ERR 12 +#define TRAP_CAUSE_SRC1_RANGE_ERR 11 +#define TRAP_CAUSE_I_RANGE_ERR 10 +#define TRAP_CAUSE_DCAPT 9 +#define TRAP_CAUSE_DST_SERROR 8 +#define TRAP_CAUSE_SRC1_SERROR 7 +#define TRAP_CAUSE_DST_MISALIGNED 6 +#define TRAP_CAUSE_SRC1_MISALIGNED 5 +#define TRAP_CAUSE_DST_DECODE_ERR 4 +#define TRAP_CAUSE_SRC1_DECODE_ERR 3 +#define TRAP_CAUSE_ILLEGAL_INST 2 +#define TRAP_CAUSE_I_SERROR 1 +#define TRAP_CAUSE_I_DECODE_ERR 0 + +extern void trap_handler(int irq, struct pt_regs *regs); +extern void trap_init_interrupt(void); +extern void unaligned_emulate(unsigned int thread); +extern int unaligned_only(unsigned int cause); + +#endif /* _ASM_UBICOM32_TRAPS_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/types.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/types.h new file mode 100644 index 0000000000..5b960dda3b --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/types.h @@ -0,0 +1,75 @@ +/* + * arch/ubicom32/include/asm/types.h + * Date type definitions for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_TYPES_H +#define _ASM_UBICOM32_TYPES_H + +/* + * This file is never included by application software unless + * explicitly requested (e.g., via linux/types.h) in which case the + * application is Linux specific so (user-) name space pollution is + * not a major issue. However, for interoperability, libraries still + * need to be careful to avoid a name clashes. + */ + +#include <asm-generic/int-ll64.h> + +#ifndef __ASSEMBLY__ + +typedef unsigned short umode_t; + +#endif /* __ASSEMBLY__ */ + +/* + * These aren't exported outside the kernel to avoid name space clashes + */ +#ifdef __KERNEL__ + +#define BITS_PER_LONG 32 + +#ifndef __ASSEMBLY__ + +/* DMA addresses are always 32-bits wide */ + +typedef u32 dma_addr_t; +typedef u32 dma64_addr_t; + +/* + * XXX These are "Ubicom style" typedefs. They should be removed in all files used by linux. + */ +typedef u32 u32_t; +typedef s32 s32_t; +typedef u16 u16_t; +typedef s16 s16_t; +typedef u8 u8_t; +typedef s8 s8_t; + +#endif /* __ASSEMBLY__ */ + +#endif /* __KERNEL__ */ + +#endif /* _ASM_UBICOM32_TYPES_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/uaccess.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/uaccess.h new file mode 100644 index 0000000000..eef739d129 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/uaccess.h @@ -0,0 +1,347 @@ +/* + * arch/ubicom32/include/asm/uaccess.h + * User space memory access functions for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + * arch/alpha + */ +#ifndef _ASM_UBICOM32_UACCESS_H +#define _ASM_UBICOM32_UACCESS_H + +/* + * User space memory access functions + */ +#include <linux/sched.h> +#include <linux/mm.h> +#include <linux/string.h> + +#include <asm/segment.h> + +#define VERIFY_READ 0 +#define VERIFY_WRITE 1 + +/* + * The exception table consists of pairs of addresses: the first is the + * address of an instruction that is allowed to fault, and the second is + * the address at which the program should continue. No registers are + * modified, so it is entirely up to the continuation code to figure out + * what to do. + * + * All the routines below use bits of fixup code that are out of line + * with the main instruction path. This means when everything is well, + * we don't even have to jump over them. Further, they do not intrude + * on our cache or tlb entries. + */ +struct exception_table_entry +{ + unsigned long insn, fixup; +}; + +/* + * Ubicom32 does not currently support the exception table handling. + */ +extern unsigned long search_exception_table(unsigned long); + + +#if defined(CONFIG_ACCESS_OK_CHECKS_ENABLED) +extern int __access_ok(unsigned long addr, unsigned long size); +#else +static inline int __access_ok(unsigned long addr, unsigned long size) +{ + return 1; +} +#endif +#define access_ok(type, addr, size) \ + likely(__access_ok((unsigned long)(addr), (size))) + +/* + * The following functions do not exist. They keep callers + * of put_user and get_user from passing unsupported argument + * types. They result in a link time error. + */ +extern int __put_user_bad(void); +extern int __get_user_bad(void); + +/* + * __put_user_no_check() + * Put the requested data into the user space verifying the address + * + * Careful to not + * (a) re-use the arguments for side effects (sizeof/typeof is ok) + * (b) require any knowledge of processes at this stage + */ +#define __put_user_no_check(x, ptr, size) \ +({ \ + int __pu_err = 0; \ + __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ + switch (size) { \ + case 1: \ + case 2: \ + case 4: \ + case 8: \ + *__pu_addr = (__typeof__(*(ptr)))x; \ + break; \ + default: \ + __pu_err = __put_user_bad(); \ + break; \ + } \ + __pu_err; \ +}) + +/* + * __put_user_check() + * Put the requested data into the user space verifying the address + * + * Careful to not + * (a) re-use the arguments for side effects (sizeof/typeof is ok) + * (b) require any knowledge of processes at this stage + * + * If requested, access_ok() will verify that ptr is a valid user + * pointer. + */ +#define __put_user_check(x, ptr, size) \ +({ \ + int __pu_err = -EFAULT; \ + __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ + if (access_ok(VERIFY_WRITE, __pu_addr, size)) { \ + __pu_err = 0; \ + switch (size) { \ + case 1: \ + case 2: \ + case 4: \ + case 8: \ + *__pu_addr = (__typeof__(*(ptr)))x; \ + break; \ + default: \ + __pu_err = __put_user_bad(); \ + break; \ + } \ + } \ + __pu_err; \ +}) + +/* + * __get_user_no_check() + * Read the value at ptr into x. + * + * If requested, access_ok() will verify that ptr is a valid user + * pointer. If the caller passes a modifying argument for ptr (e.g. x++) + * this macro will not work. + */ +#define __get_user_no_check(x, ptr, size) \ +({ \ + int __gu_err = 0; \ + __typeof__((x)) __gu_val = 0; \ + const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \ + switch (size) { \ + case 1: \ + case 2: \ + case 4: \ + case 8: \ + __gu_val = (__typeof__((x)))*(__gu_addr); \ + break; \ + default: \ + __gu_err = __get_user_bad(); \ + (x) = 0; \ + break; \ + } \ + (x) = __gu_val; \ + __gu_err; \ +}) + +/* + * __get_user_check() + * Read the value at ptr into x. + * + * If requested, access_ok() will verify that ptr is a valid user + * pointer. + */ +#define __get_user_check(x, ptr, size) \ +({ \ + int __gu_err = -EFAULT; \ + __typeof__(x) __gu_val = 0; \ + const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \ + if (access_ok(VERIFY_READ, __gu_addr, size)) { \ + __gu_err = 0; \ + switch (size) { \ + case 1: \ + case 2: \ + case 4: \ + case 8: \ + __gu_val = (__typeof__((x)))*(__gu_addr); \ + break; \ + default: \ + __gu_err = __get_user_bad(); \ + (x) = 0; \ + break; \ + } \ + } \ + (x) = __gu_val; \ + __gu_err; \ +}) + +/* + * The "xxx" versions are allowed to perform some amount of address + * space checking. See access_ok(). + */ +#define put_user(x,ptr) \ + __put_user_check((__typeof__(*(ptr)))(x),(ptr), sizeof(*(ptr))) +#define get_user(x,ptr) \ + __get_user_check((x), (ptr), sizeof(*(ptr))) + +/* + * The "__xxx" versions do not do address space checking, useful when + * doing multiple accesses to the same area (the programmer has to do the + * checks by hand with "access_ok()") + */ +#define __put_user(x,ptr) \ + __put_user_no_check((__typeof__(*(ptr)))(x),(ptr), sizeof(*(ptr))) +#define __get_user(x,ptr) \ + __get_user_no_check((x), (ptr), sizeof(*(ptr))) + +/* + * __copy_tofrom_user_no_check() + * Copy the data either to or from user space. + * + * Return the number of bytes NOT copied. + */ +static inline unsigned long +__copy_tofrom_user_no_check(void *to, const void *from, unsigned long n) +{ + memcpy(to, from, n); + return 0; +} + +/* + * copy_to_user() + * Copy the kernel data to user space. + * + * Return the number of bytes that were copied. + */ +static inline unsigned long +copy_to_user(void __user *to, const void *from, unsigned long n) +{ + if (!access_ok(VERIFY_WRITE, to, n)) { + return n; + } + return __copy_tofrom_user_no_check((__force void *)to, from, n); +} + +/* + * copy_from_user() + * Copy the user data to kernel space. + * + * Return the number of bytes that were copied. On error, we zero + * out the destination. + */ +static inline unsigned long +copy_from_user(void *to, const void __user *from, unsigned long n) +{ + if (!access_ok(VERIFY_READ, from, n)) { + return n; + } + return __copy_tofrom_user_no_check(to, (__force void *)from, n); +} + +#define __copy_to_user(to, from, n) \ + __copy_tofrom_user_no_check((__force void *)to, from, n) +#define __copy_from_user(to, from, n) \ + __copy_tofrom_user_no_check(to, (__force void *)from, n) +#define __copy_to_user_inatomic(to, from, n) \ + __copy_tofrom_user_no_check((__force void *)to, from, n) +#define __copy_from_user_inatomic(to, from, n) \ + __copy_tofrom_user_no_check(to, (__force void *)from, n) + +#define copy_to_user_ret(to, from, n, retval) \ + ({ if (copy_to_user(to, from, n)) return retval; }) + +#define copy_from_user_ret(to, from, n, retval) \ + ({ if (copy_from_user(to, from, n)) return retval; }) + +/* + * strncpy_from_user() + * Copy a null terminated string from userspace. + * + * dst - Destination in kernel space. The buffer must be at least count. + * src - Address of string in user space. + * count - Maximum number of bytes to copy (including the trailing NULL). + * + * Returns the length of the string (not including the trailing NULL. If + * count is smaller than the length of the string, we copy count bytes + * and return count. + * + */ +static inline long strncpy_from_user(char *dst, const __user char *src, long count) +{ + char *tmp; + if (!access_ok(VERIFY_READ, src, 1)) { + return -EFAULT; + } + + strncpy(dst, src, count); + for (tmp = dst; *tmp && count > 0; tmp++, count--) { + ; + } + return(tmp - dst); +} + +/* + * strnlen_user() + * Return the size of a string (including the ending 0) + * + * Return -EFAULT on exception, a value greater than <n> if too long + */ +static inline long strnlen_user(const __user char *src, long n) +{ + if (!access_ok(VERIFY_READ, src, 1)) { + return -EFAULT; + } + return(strlen(src) + 1); +} + +#define strlen_user(str) strnlen_user(str, 32767) + +/* + * __clear_user() + * Zero Userspace + */ +static inline unsigned long __clear_user(__user void *to, unsigned long n) +{ + memset(to, 0, n); + return 0; +} + +/* + * clear_user() + * Zero user space (check for valid addresses) + */ +static inline unsigned long clear_user(__user void *to, unsigned long n) +{ + if (!access_ok(VERIFY_WRITE, to, n)) { + return -EFAULT; + } + return __clear_user(to, n); +} + +#endif /* _ASM_UBICOM32_UACCESS_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/uart_tio.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/uart_tio.h new file mode 100644 index 0000000000..19ef82efa6 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/uart_tio.h @@ -0,0 +1,126 @@ +/* + * arch/ubicom32/include/asm/uart_tio.h + * Ubicom32 architecture UART TIO definitions. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + */ +#ifndef _ASM_UBICOM32_UART_TIO_H +#define _ASM_UBICOM32_UART_TIO_H + +#include <asm/devtree.h> + +#define UARTTIO_RX_FIFO_SIZE 16 +#define UARTTIO_TX_FIFO_SIZE 16 + +/* + * Interrupt flags + */ +#define UARTTIO_UART_INT_RX 0x00000001 // set when a character has been recevied (TODO: add watermark) +#define UARTTIO_UART_INT_RXOVF 0x00000002 // set when the receive buffer has overflowed +#define UARTTIO_UART_INT_RXFRAME 0x00000004 // set when there has been a framing error + +#define UARTTIO_UART_INT_TX 0x00000100 // set every time a character is transmitted +#define UARTTIO_UART_INT_TXBE 0x00000200 // set when the transmit buffer is empty (TODO: add watermark) + +#define UARTTIO_UART_FLAG_ENABLED 0x80000000 +#define UARTTIO_UART_FLAG_SET_RATE 0x00000001 // set to update baud rate +#define UARTTIO_UART_FLAG_RESET 0x00000002 // set to reset the port +struct uarttio_uart { + volatile u32_t flags; + + volatile u32_t baud_rate; + volatile u32_t current_baud_rate; + u32_t bit_time; + + /* + * Modem status register + */ + volatile u32_t status; + + /* + * Interrupt registers + */ + volatile u32_t int_mask; + volatile u32_t int_flags; + + /* + * Ports and pins + */ + u32_t rx_port; + u32_t tx_port; + + u8_t rx_pin; + u8_t tx_pin; + + /* + * Configuration Data + */ + u8_t rx_bits; + u8_t rx_stop_bits; + u8_t tx_bits; + u8_t tx_stop_bits; + + /* + * RX state machine data + */ + u32_t rx_timer; + u32_t rx_bit_pos; + u32_t rx_byte; + u32_t rx_fifo_head; + u32_t rx_fifo_tail; + u32_t rx_fifo_size; + + /* + * TX state machine data + */ + u32_t tx_timer; + u32_t tx_bit_pos; + u32_t tx_byte; + u32_t tx_fifo_head; + u32_t tx_fifo_tail; + u32_t tx_fifo_size; + + /* + * FIFOs + */ + u8_t rx_fifo[UARTTIO_RX_FIFO_SIZE]; + u8_t tx_fifo[UARTTIO_TX_FIFO_SIZE]; +}; + +#define UARTTIO_VP_VERSION 1 +struct uarttio_regs { + u32_t version; + + u32_t thread; + + u32_t max_uarts; + + struct uarttio_uart uarts[0]; +}; + +#define UARTTIO_NODE_VERSION 1 +struct uarttio_node { + struct devtree_node dn; + + u32_t version; + struct uarttio_regs *regs; + u32_t regs_sz; +}; + +#endif /* _ASM_UBICOM32_UART_TIO_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/ubi32-cs4384.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/ubi32-cs4384.h new file mode 100644 index 0000000000..18e7634ff7 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/ubi32-cs4384.h @@ -0,0 +1,52 @@ +/* + * arch/ubicom32/include/asm/ubi32-cs4384.h + * Ubicom32 architecture CS4384 driver platform data definitions. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + */ +#ifndef _ASM_UBICOM32_UBI32_CS4384_H +#define _ASM_UBICOM32_UBI32_CS4384_H + +enum ubi32_cs4384_mclk_source { + UBI32_CS4384_MCLK_PWM_0, + UBI32_CS4384_MCLK_PWM_1, + UBI32_CS4384_MCLK_PWM_2, + UBI32_CS4384_MCLK_CLKDIV_1, + UBI32_CS4384_MCLK_OTHER, +}; + +struct ubi32_cs4384_mclk_entry { + /* + * Rate, in Hz, of this entry + */ + int rate; + + /* + * The divider to program to get the rate + */ + int div; +}; + +struct ubi32_cs4384_platform_data { + enum ubi32_cs4384_mclk_source mclk_src; + + int n_mclk; + struct ubi32_cs4384_mclk_entry *mclk_entries; +}; +#endif /* _ASM_UBICOM32_UBI32_CS4384_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/ubi32-pcm.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/ubi32-pcm.h new file mode 100644 index 0000000000..ab14b36816 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/ubi32-pcm.h @@ -0,0 +1,54 @@ +/* + * arch/ubicom32/include/asm/ubi32-pcm.h + * Ubicom32 architecture PCM driver platform data definitions. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + */ +#ifndef _ASM_UBICOM32_UBI32_PCM_H +#define _ASM_UBICOM32_UBI32_PCM_H + +/* + * This function is called when the sample rate has changed + */ +typedef int (*ubi32_pcm_set_rate_fn_t)(void *appdata, int rate); + +struct ubi32pcm_platform_data { + /* + * Name of the audio node/inst + */ + const char *node_name; + const char *inst_name; + int inst_num; + + /* + * Application specific data provided when calling functions + */ + void *appdata; + + /* + * Functions called when various things happen + */ + ubi32_pcm_set_rate_fn_t set_rate; + + /* + * Pointer to optional upper layer data (i.e. DAC config, etc) + */ + void *priv_data; +}; +#endif /* _ASM_UBICOM32_UBI32_PCM_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/ubicom32-common-asm.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/ubicom32-common-asm.h new file mode 100644 index 0000000000..82696bbbfc --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/ubicom32-common-asm.h @@ -0,0 +1,49 @@ +/* + * arch/ubicom32/include/asm/ubicom32-common-asm.h + * Ubicom32 atomic lock operations. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ + +#ifndef _ASM_UBICOM32_UBICOM32_COMMON_ASM_H +#define _ASM_UBICOM32_UBICOM32_COMMON_ASM_H + +/* + * atomic_lock_acquire macro + * Equivalent to __atomic_lock_acquire() + */ +.macro atomic_lock_acquire + bset scratchpad1, scratchpad1, #ATOMIC_LOCK_BIT + jmpne.f .-4 +.endm + +/* + * atomic_lock_release macro + * Equivalent to __atomic_lock_release() + */ +.macro atomic_lock_release + bclr scratchpad1, scratchpad1, #ATOMIC_LOCK_BIT +.endm + +#endif /* _ASM_UBICOM32_UBICOM32_COMMON_ASM_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/ubicom32-common.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/ubicom32-common.h new file mode 100644 index 0000000000..1f05a8cd39 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/ubicom32-common.h @@ -0,0 +1,128 @@ +/* + * arch/ubicom32/include/asm/ubicom32-common.h + * Ubicom32 atomic lock operations. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ + +#ifndef _ASM_UBICOM32_UBICOM32_COMMON_H +#define _ASM_UBICOM32_UBICOM32_COMMON_H + +#define S(arg) #arg +#define D(arg) S(arg) +/* + * scratchpad1 is owned by the LDSR. + * + * The upper bits provide 16 global spinlocks. Acquiring one of these + * global spinlocks synchornizes across multiple threads and prevents + * the LDSR from delivering any interrupts while the lock is held. + * Use these locks only when absolutely required. + * + * The lower 16 bits of scratchpad1 are used as per thread interrupt + * enable/disable bits. These bits will prevent a thread from receiving + * any interrupts. + * + * Bit Usage: + * - MT_EN_LOCK_BIT - Protects writes to MT_EN, so code can read current value + * then write a new value atomically (profiler for example) + * - ATOMIC_LOCK_BIT - Used to provide general purpose atomic handling. + * - LDSR_LOCK_BIT - Used by the LDSR exclusively to provide protection. + * - DCCR_LOCK_BIT - Used to limit access to the DCCR cache control peripheral + * - ICCR_LOCK_BIT - Used to limit access to the ICCR cache control peripheral + * - LSB 16 bits - Used by the LDSR to represent thread enable/disable bits. + */ +#define MT_EN_LOCK_BIT 31 +#define ATOMIC_LOCK_BIT 30 +#define LDSR_LOCK_BIT 29 +#define PCI_LOCK_BIT 28 +#define ICCR_LOCK_BIT 27 +#define DCCR_LOCK_BIT 26 + +#if !defined(__ASSEMBLY__) + +#define UBICOM32_TRYLOCK(bit) \ + asm volatile ( \ + " move.4 %0, #0 \n\t" \ + " bset scratchpad1, scratchpad1, #"D(bit)" \n\t" \ + " jmpne.f 1f \n\t" \ + " move.4 %0, #1 \n\t" \ + "1: \n\t" \ + : "=r" (ret) \ + : \ + : "cc", "memory" \ + ) \ + +#define UBICOM32_UNLOCK(bit) \ + asm volatile ( \ + " bclr scratchpad1, scratchpad1, #"D(bit)" \n\t" \ + : \ + : \ + : "cc", "memory" \ + ) \ + +#define UBICOM32_LOCK(bit) \ + asm volatile ( \ + "1: bset scratchpad1, scratchpad1, #"D(bit)" \n\t" \ + " jmpne.f 1b \n\t" \ + : \ + : \ + : "cc", "memory" \ + ) \ + +/* + * __atomic_lock_trylock() + * Attempt to acquire the lock, return TRUE if acquired. + */ +static inline int __atomic_lock_trylock(void) +{ + int ret; + UBICOM32_TRYLOCK(ATOMIC_LOCK_BIT); + return ret; +} + +/* + * __atomic_lock_release() + * Release the global atomic lock. + * + * Note: no one is suspended waiting since this lock is a spinning lock. + */ +static inline void __atomic_lock_release(void) +{ + UBICOM32_UNLOCK(ATOMIC_LOCK_BIT); +} + +/* + * __atomic_lock_acquire() + * Acquire the global atomic lock, spin if not available. + */ +static inline void __atomic_lock_acquire(void) +{ + UBICOM32_LOCK(ATOMIC_LOCK_BIT); +} +#else /* __ASSEMBLY__ */ + +#include <asm/ubicom32-common-asm.h> + +#endif /* __ASSEMBLY__ */ +#endif /* _ASM_UBICOM32_UBICOM32_COMMON_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/ubicom32-spi-gpio.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/ubicom32-spi-gpio.h new file mode 100644 index 0000000000..b5379e3eff --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/ubicom32-spi-gpio.h @@ -0,0 +1,62 @@ +/* + * arch/ubicom32/include/asm/ubicom32-spi-gpio.h + * Platform driver data definitions for GPIO based SPI driver. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_UBICOM32_SPI_GPIO_H +#define _ASM_UBICOM32_UBICOM32_SPI_GPIO_H + +struct ubicom32_spi_gpio_platform_data { + /* + * GPIO to use for MOSI, MISO, CLK + */ + int pin_mosi; + int pin_miso; + int pin_clk; + + /* + * Default state of CLK line + */ + int clk_default; + + /* + * Number of chip selects on this bus + */ + int num_chipselect; + + /* + * The bus number of this chip + */ + int bus_num; +}; + +struct ubicom32_spi_gpio_controller_data { + /* + * GPIO to use for chip select + */ + int pin_cs; +}; + +#endif /* _ASM_UBICOM32_UBICOM32_SPI_GPIO_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/ubicom32-tio.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/ubicom32-tio.h new file mode 100644 index 0000000000..4d87e5c0ee --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/ubicom32-tio.h @@ -0,0 +1,42 @@ +/* + * arch/ubicom32/include/asm/ubicom32-tio.h + * Threaded I/O interface definitions. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_UBICOM32_TIO_H +#define _ASM_UBICOM32_UBICOM32_TIO_H + +extern u8_t usb_tio_read_u16(u32_t address, u16_t *data); +extern u8_t usb_tio_read_u8(u32_t address, u8_t *data); + +extern u8_t usb_tio_write_u16(u32_t address, u16_t data); +extern u8_t usb_tio_write_u8(u32_t address, u8_t data); + +extern u8_t usb_tio_read_fifo(u32_t address, u32_t buffer, u32_t bytes); +extern u8_t usb_tio_write_fifo(u32_t address, u32_t buffer, u32_t bytes); +extern u8_t usb_tio_write_fifo_sync(u32_t address, u32_t buffer, u32_t bytes); +extern void usb_tio_read_int_status(u8_t *int_usb, u16_t *int_tx, u16_t *int_rx); + +#endif /* _ASM_UBICOM32_UBICOM32_TIO_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/ubicom32bl.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/ubicom32bl.h new file mode 100644 index 0000000000..498c754964 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/ubicom32bl.h @@ -0,0 +1,84 @@ +/* + * arch/ubicom32/include/asm/ubicom32bl.h + * Ubicom32 architecture backlight driver platform data definitions. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_UBICOM32_BL_H +#define _ASM_UBICOM32_UBICOM32_BL_H + +/* + * Different backlight control mechanisms + */ +enum ubicom32bl_pwm_types { + /* + * PWM controlled backlight + */ + UBICOM32BL_TYPE_PWM, + + /* + * HRT based PWM backlight + */ + UBICOM32BL_TYPE_PWM_HRT, + + /* + * No dimming, just on or off + */ + UBICOM32BL_TYPE_BINARY, +}; + +struct ubicom32bl_platform_data { + /* + * Default intensity of the backlight 0-255 + */ + u8_t default_intensity; + + /* + * TRUE if the backlight sense is active low. (inverted) + * FALSE if the backlight sense is active high. + */ + bool invert; + + /* + * Type of the backlight + */ + enum ubicom32bl_pwm_types type; + + /* + * GPIO of the backlight if UBICOM32BL_TYPE_PWM_HRT, UBICOM32BL_TYPE_BINARY + */ + unsigned gpio; + + /* + * PWM channel and parameters of the backlight if UBICOM32BL_TYPE_PWM + * pre_scaler: sets the rate at which the PWM timer is clocked. (clk_core / 2^pre_scaler) + * period: sets the period of the timer in timer cycles + * The duty cycle will be directly proportional to the brightness setting. + */ + u32_t pwm_channel; + u8_t pwm_prescale; + u16_t pwm_period; +}; + +#endif /* _ASM_UBICOM32_UBICOM32_BL_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/ubicom32fb.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/ubicom32fb.h new file mode 100644 index 0000000000..ae994e261e --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/ubicom32fb.h @@ -0,0 +1,56 @@ +/* + * arch/ubicom32/include/asm/ubicom32fb.h + * Ubicom32 architecture video frame buffer definitions. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + */ +#ifndef _ASM_UBICOM32_UBICOM32FB_H +#define _ASM_UBICOM32_UBICOM32FB_H + +#include <linux/ioctl.h> + +/* + * Set next frame + */ +#define UBICOM32FB_IOCTL_SET_NEXT_FRAME _IOW('r', 1, void *) +#define UBICOM32FB_IOCTL_SET_NEXT_FRAME_SYNC _IOW('r', 2, void *) + +/* + * Set Mode + */ +#define UBICOM32FB_IOCTL_SET_MODE _IOW('r', 3, void *) +struct ubicom32fb_mode { + unsigned long width; + unsigned long height; + unsigned long flags; + void *next_frame; +}; +#define UBICOM32FB_IOCTL_SET_MODE_FLAG_YUV_SCAN_ORDER (1 << 8) + +#define UBICOM32FB_IOCTL_SET_MODE_FLAG_YUV_BLOCK_ORDER (1 << 7) +#define UBICOM32FB_IOCTL_SET_MODE_FLAG_YUV (1 << 6) +#define UBICOM32FB_IOCTL_SET_MODE_FLAG_VSUB (1 << 5) +#define UBICOM32FB_IOCTL_SET_MODE_FLAG_VRANGE_16_255 (1 << 4) + +#define UBICOM32FB_IOCTL_SET_MODE_FLAG_VRANGE_0_255 (1 << 3) +#define UBICOM32FB_IOCTL_SET_MODE_FLAG_HSUB_2_1 (1 << 2) +#define UBICOM32FB_IOCTL_SET_MODE_FLAG_HSUB_1_1 (1 << 1) +#define UBICOM32FB_IOCTL_SET_MODE_FLAG_SCALE_ENABLE (1 << 0) + +#endif /* _ASM_UBICOM32_UBICOM32FB_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/ubicom32hid.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/ubicom32hid.h new file mode 100644 index 0000000000..d324313f10 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/ubicom32hid.h @@ -0,0 +1,133 @@ +/* + * arch/ubicom32/include/asm/ubicom32hid.h + * Ubicom32 architecture HID driver platform data definitions. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_UBICOM32_HID_H +#define _ASM_UBICOM32_UBICOM32_HID_H + +enum ubicom32hid_bl_types { + /* + * On or off, using command SET_BL_EN, PB4 + */ + UBICOM32HID_BL_TYPE_BINARY, + + /* + * Dimmable, using command SET_PWM, PB3 + */ + UBICOM32HID_BL_TYPE_PWM, +}; + +/* + * IR code mapping to event code. + * If there are no button mappings and no ir mappings + * then no input driver will be registered. + */ +struct ubicom32hid_ir { + /* + * Input event code (KEY_*, SW_*, etc) + */ + int code; + + /* + * Input event type (EV_KEY, EV_SW, etc) + */ + int type; + + /* + * The IR code of this button. + */ + uint32_t ir_code; +}; + +/* + * Button mapping to event code. + * If there are no button mappings and no ir mappings + * then no input driver will be registered. + */ +struct ubicom32hid_button { + /* + * Input event code (KEY_*, SW_*, etc) + */ + int code; + + /* + * Input event type (EV_KEY, EV_SW, etc) + */ + int type; + + /* + * Bit number of this button. + */ + uint8_t bit; +}; + +struct ubicom32hid_platform_data { + /* + * Default intensity of the backlight 0-255 + */ + u8_t default_intensity; + + /* + * GPIO number of the reset line and its polarity. + */ + unsigned gpio_reset; + int gpio_reset_polarity; + + /* + * TRUE if the backlight sense is active low. (inverted) + * FALSE if the backlight sense is active high. + */ + bool invert; + + /* + * Type of the backlight we are controlling + */ + enum ubicom32hid_bl_types type; + + /* + * Optional polling rate for input, in ms, defaults to 100ms + */ + int poll_interval; + + /* + * Optional name to register as input device + */ + const char *input_name; + + /* + * Button mapping array + */ + const struct ubicom32hid_button *buttons; + int nbuttons; + + /* + * IR mapping array + */ + const struct ubicom32hid_ir *ircodes; + int nircodes; +}; + +#endif /* _ASM_UBICOM32_UBICOM32_HID_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/ubicom32input.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/ubicom32input.h new file mode 100644 index 0000000000..dea5c79286 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/ubicom32input.h @@ -0,0 +1,76 @@ +/* + * arch/ubicom32/include/asm/ubicom32input.h + * Ubicom32 Input driver, based on gpio-keys + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + * + * TODO: add groups for inputs which can be sampled together + */ + +#ifndef _ASM_UBICOM32_UBICOM32_INPUT_H +#define _ASM_UBICOM32_UBICOM32_INPUT_H + +struct ubicom32input_button { + /* + * Input event code (KEY_*, SW_*, etc) + */ + int code; + + /* + * Input event type (EV_KEY, EV_SW, etc) + */ + int type; + + /* + * GPIO to poll + */ + int gpio; + + /* + * 1 for active low, 0 for active high + */ + int active_low; + + /* + * Description, used for reserving GPIOs + */ + const char *desc; +}; + +struct ubicom32input_platform_data { + struct ubicom32input_button *buttons; + int nbuttons; + + /* + * Optional poll interval, in ms, defaults to 50ms + */ + int poll_interval; + + /* + * Option Name of this driver + */ + const char *name; +}; + +#endif /* _ASM_UBICOM32_UBICOM32_INPUT_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/ubicom32input_i2c.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/ubicom32input_i2c.h new file mode 100644 index 0000000000..eb16723750 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/ubicom32input_i2c.h @@ -0,0 +1,71 @@ +/* + * arch/ubicom32/include/asm/ubicom32input_i2c.h + * Ubicom32 architecture Input driver over I2C platform data definitions. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + * + * TODO: add groups for inputs which can be sampled together + */ + +#ifndef _ASM_UBICOM32_UBICOM32_INPUT_I2C_H +#define _ASM_UBICOM32_UBICOM32_INPUT_I2C_H + +struct ubicom32input_i2c_button { + /* + * Input event code (KEY_*, SW_*, etc) + */ + int code; + + /* + * Input event type (EV_KEY, EV_SW, etc) + */ + int type; + + /* + * Bit number of this button. (0 - ngpio) + */ + int bit; + + /* + * 1 for active low, 0 for active high + */ + int active_low; +}; + +struct ubicom32input_i2c_platform_data { + struct ubicom32input_i2c_button *buttons; + int nbuttons; + + /* + * Optional poll interval, in ms, defaults to 100ms + */ + int poll_interval; + + /* + * Option Name of this driver + */ + const char *name; +}; + +#endif /* _ASM_UBICOM32_UBICOM32_INPUT_I2C_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/ubicom32lcd.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/ubicom32lcd.h new file mode 100644 index 0000000000..eea5340fd4 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/ubicom32lcd.h @@ -0,0 +1,38 @@ +/* + * arch/ubicom32/include/asm/ubicom32lcd.h + * Ubicom32 architecture LCD driver platform data definitions. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + */ +#ifndef _ASM_UBICOM32_UBICOM32_LCD_H +#define _ASM_UBICOM32_UBICOM32_LCD_H + +#include <asm/ip5000.h> + +struct ubicom32lcd_platform_data { + int pin_cs; + int pin_rs; + int pin_rd; + int pin_wr; + int pin_reset; + int data_shift; + struct ubicom32_io_port *port_data; +}; + +#endif /* _ASM_UBICOM32_UBICOM32_LCD_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/ubicom32lcdpower.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/ubicom32lcdpower.h new file mode 100644 index 0000000000..03b8a7eaaa --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/ubicom32lcdpower.h @@ -0,0 +1,39 @@ +/* + * arch/ubicom32/include/asm/ubicom32lcdpower.h + * Ubicom32 architecture LCD driver platform data definitions. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_UBICOM32_LCDPOWER_H +#define _ASM_UBICOM32_UBICOM32_LCDPOWER_H + +struct ubicom32lcdpower_platform_data { + /* + * GPIO and polarity for VGH signal. A FALSE polarity is active low, TRUE is active high. + */ + int vgh_gpio; + bool vgh_polarity; +}; + +#endif /* _ASM_UBICOM32_UBICOM32_LCDPOWER_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/ubicom32ring.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/ubicom32ring.h new file mode 100644 index 0000000000..dd9c8f76c5 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/ubicom32ring.h @@ -0,0 +1,103 @@ +/* + * arch/ubicom32/include/asm/ubicom32ring.h + * Userspace I/O platform driver for Ubicom32 ring buffers + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + */ + +#ifndef _ASM_UBICOM32_UBICOM32RING_H +#define _ASM_UBICOM32_UBICOM32RING_H + +#define UIO_UBICOM32RING_REG_VERSION 2 + +struct uio_ubicom32ring_desc { + volatile unsigned int head; + volatile unsigned int tail; + unsigned int entries; + volatile unsigned int ring[0]; +}; + +struct uio_ubicom32ring_regs { + unsigned int version; + + /* + * Magic type used to identify the ring set. Each driver will + * have a different magic value. + */ + unsigned int magic; + + /* + * Registers defined by the driver + */ + unsigned int regs_size; + void *regs; + + /* + * The locations of the rings + * + * DO NOT ADD ANYTHING BELOW THIS LINE + */ + unsigned int num_rings; + struct uio_ubicom32ring_desc *rings[0]; +}; + +/* + * ringtio_ring_flush + */ +static inline void ringtio_ring_flush(struct uio_ubicom32ring_desc *rd) +{ + rd->head = rd->tail = 0; +} + +/* + * ringtio_ring_get + */ +static inline int ringtio_ring_get(struct uio_ubicom32ring_desc *rd, void **val) +{ + if (rd->head == rd->tail) { + return 0; + } + + *val = (void *)rd->ring[rd->head++]; + if (rd->head == rd->entries) { + rd->head = 0; + } + return 1; +} + +/* + * ringtio_ring_put + */ +static inline int ringtio_ring_put(struct uio_ubicom32ring_desc *rd, void *val) +{ + unsigned int newtail = rd->tail + 1; + if (newtail == rd->entries) { + newtail = 0; + } + + if (newtail == rd->head) { + return 0; + } + + rd->ring[rd->tail] = (unsigned int)val; + rd->tail = newtail; + return 1; +} + +#endif /* _ASM_UBICOM32_UBICOM32RING_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/ubicom32sd.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/ubicom32sd.h new file mode 100644 index 0000000000..b5cebfa2ed --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/ubicom32sd.h @@ -0,0 +1,45 @@ +/* + * arch/ubicom32/include/asm/ubicom32sd.h + * Ubicom32SD public include file + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + */ +#ifndef _ASM_UBICOM32_UBICOM32_SD_H +#define _ASM_UBICOM32_UBICOM32_SD_H + +struct ubicom32sd_card { + /* + * GPIOs of PWR, WP and CD lines. + * Polarity is 1 for active high and 0 for active low + */ + int pin_pwr; + bool pwr_polarity; + int pin_wp; + bool wp_polarity; + int pin_cd; + bool cd_polarity; +}; + +struct ubicom32sd_platform_data { + int ncards; + + struct ubicom32sd_card *cards; +}; + +#endif /* _ASM_UBICOM32_UBICOM32_SD_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/ubicom32suart.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/ubicom32suart.h new file mode 100644 index 0000000000..824d0de2e4 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/ubicom32suart.h @@ -0,0 +1,36 @@ +/* + * arch/ubicom32/include/asm/ubicom32suart.h + * <TODO: Replace with short file description> + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_UBICOM32_SUART_H +#define _ASM_UBICOM32_UBICOM32_SUART_H + +/* + * Platform resource id for serdes uart clock parameter + */ +#define UBICOM32_SUART_IORESOURCE_CLOCK (1) + +#endif /* _ASM_UBICOM32_UBICOM32_SUART_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/ucontext.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/ucontext.h new file mode 100644 index 0000000000..71c1129023 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/ucontext.h @@ -0,0 +1,39 @@ +/* + * arch/ubicom32/include/asm/ucontext.h + * Definition of ucontext structure for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_UCONTEXT_H +#define _ASM_UBICOM32_UCONTEXT_H + +struct ucontext { + unsigned long uc_flags; + struct ucontext *uc_link; + stack_t uc_stack; + struct sigcontext uc_mcontext; + sigset_t uc_sigmask; /* mask last for extensibility */ +}; + +#endif /* _ASM_UBICOM32_UCONTEXT_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/unaligned.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/unaligned.h new file mode 100644 index 0000000000..41b2646604 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/unaligned.h @@ -0,0 +1,44 @@ +/* + * arch/ubicom32/include/asm/unaligned.h + * Ubicom32 architecture unaligned memory access definitions. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + * + * TODO: This is a copy of arm unaligned handling that probably needs + * to be optimized for UBICOM32, but it works for now. + */ + +#ifndef _ASM_UBICOM32_UNALIGNED_H +#define _ASM_UBICOM32_UNALIGNED_H + +#include <asm/types.h> + +#include <linux/unaligned/le_byteshift.h> +#include <linux/unaligned/be_byteshift.h> +#include <linux/unaligned/generic.h> + +#define get_unaligned __get_unaligned_be +#define put_unaligned __put_unaligned_be + +#endif /* _ASM_UBICOM32_UNALIGNED_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/unistd.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/unistd.h new file mode 100644 index 0000000000..2c7ba56006 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/unistd.h @@ -0,0 +1,400 @@ +/* + * arch/ubicom32/include/asm/unistd.h + * Ubicom32 architecture syscall definitions. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_UNISTD_H +#define _ASM_UBICOM32_UNISTD_H + +/* + * This file contains the system call numbers. + */ + +#define __NR_restart_syscall 0 +#define __NR_exit 1 +#define __NR_fork 2 +#define __NR_read 3 +#define __NR_write 4 +#define __NR_open 5 +#define __NR_close 6 +#define __NR_waitpid 7 +#define __NR_creat 8 +#define __NR_link 9 +#define __NR_unlink 10 +#define __NR_execve 11 +#define __NR_chdir 12 +#define __NR_time 13 +#define __NR_mknod 14 +#define __NR_chmod 15 +#define __NR_chown 16 +#define __NR_break 17 +#define __NR_oldstat 18 +#define __NR_lseek 19 +#define __NR_getpid 20 +#define __NR_mount 21 +#define __NR_umount 22 +#define __NR_setuid 23 +#define __NR_getuid 24 +#define __NR_stime 25 +#define __NR_ptrace 26 +#define __NR_alarm 27 +#define __NR_oldfstat 28 +#define __NR_pause 29 +#define __NR_utime 30 +#define __NR_stty 31 +#define __NR_gtty 32 +#define __NR_access 33 +#define __NR_nice 34 +#define __NR_ftime 35 +#define __NR_sync 36 +#define __NR_kill 37 +#define __NR_rename 38 +#define __NR_mkdir 39 +#define __NR_rmdir 40 +#define __NR_dup 41 +#define __NR_pipe 42 +#define __NR_times 43 +#define __NR_prof 44 +#define __NR_brk 45 +#define __NR_setgid 46 +#define __NR_getgid 47 +#define __NR_signal 48 +#define __NR_geteuid 49 +#define __NR_getegid 50 +#define __NR_acct 51 +#define __NR_umount2 52 +#define __NR_lock 53 +#define __NR_ioctl 54 +#define __NR_fcntl 55 +#define __NR_mpx 56 +#define __NR_setpgid 57 +#define __NR_ulimit 58 +#define __NR_oldolduname 59 +#define __NR_umask 60 +#define __NR_chroot 61 +#define __NR_ustat 62 +#define __NR_dup2 63 +#define __NR_getppid 64 +#define __NR_getpgrp 65 +#define __NR_setsid 66 +#define __NR_sigaction 67 +#define __NR_sgetmask 68 +#define __NR_ssetmask 69 +#define __NR_setreuid 70 +#define __NR_setregid 71 +#define __NR_sigsuspend 72 +#define __NR_sigpending 73 +#define __NR_sethostname 74 +#define __NR_setrlimit 75 +#define __NR_getrlimit 76 +#define __NR_getrusage 77 +#define __NR_gettimeofday 78 +#define __NR_settimeofday 79 +#define __NR_getgroups 80 +#define __NR_setgroups 81 +#define __NR_select 82 +#define __NR_symlink 83 +#define __NR_oldlstat 84 +#define __NR_readlink 85 +#define __NR_uselib 86 +#define __NR_swapon 87 +#define __NR_reboot 88 +#define __NR_readdir 89 +#define __NR_mmap 90 +#define __NR_munmap 91 +#define __NR_truncate 92 +#define __NR_ftruncate 93 +#define __NR_fchmod 94 +#define __NR_fchown 95 +#define __NR_getpriority 96 +#define __NR_setpriority 97 +#define __NR_profil 98 +#define __NR_statfs 99 +#define __NR_fstatfs 100 +#define __NR_ioperm 101 +#define __NR_socketcall 102 +#define __NR_syslog 103 +#define __NR_setitimer 104 +#define __NR_getitimer 105 +#define __NR_stat 106 +#define __NR_lstat 107 +#define __NR_fstat 108 +#define __NR_olduname 109 +#define __NR_iopl /* 110 */ not supported +#define __NR_vhangup 111 +#define __NR_idle /* 112 */ Obsolete +#define __NR_vm86 /* 113 */ not supported +#define __NR_wait4 114 +#define __NR_swapoff 115 +#define __NR_sysinfo 116 +#define __NR_ipc 117 +#define __NR_fsync 118 +#define __NR_sigreturn 119 +#define __NR_clone 120 +#define __NR_setdomainname 121 +#define __NR_uname 122 +#define __NR_cacheflush 123 +#define __NR_adjtimex 124 +#define __NR_mprotect 125 +#define __NR_sigprocmask 126 +#define __NR_create_module 127 +#define __NR_init_module 128 +#define __NR_delete_module 129 +#define __NR_get_kernel_syms 130 +#define __NR_quotactl 131 +#define __NR_getpgid 132 +#define __NR_fchdir 133 +#define __NR_bdflush 134 +#define __NR_sysfs 135 +#define __NR_personality 136 +#define __NR_afs_syscall 137 /* Syscall for Andrew File System */ +#define __NR_setfsuid 138 +#define __NR_setfsgid 139 +#define __NR__llseek 140 +#define __NR_getdents 141 +#define __NR__newselect 142 +#define __NR_flock 143 +#define __NR_msync 144 +#define __NR_readv 145 +#define __NR_writev 146 +#define __NR_getsid 147 +#define __NR_fdatasync 148 +#define __NR__sysctl 149 +#define __NR_mlock 150 +#define __NR_munlock 151 +#define __NR_mlockall 152 +#define __NR_munlockall 153 +#define __NR_sched_setparam 154 +#define __NR_sched_getparam 155 +#define __NR_sched_setscheduler 156 +#define __NR_sched_getscheduler 157 +#define __NR_sched_yield 158 +#define __NR_sched_get_priority_max 159 +#define __NR_sched_get_priority_min 160 +#define __NR_sched_rr_get_interval 161 +#define __NR_nanosleep 162 +#define __NR_mremap 163 +#define __NR_setresuid 164 +#define __NR_getresuid 165 +#define __NR_getpagesize 166 +#define __NR_query_module 167 +#define __NR_poll 168 +#define __NR_nfsservctl 169 +#define __NR_setresgid 170 +#define __NR_getresgid 171 +#define __NR_prctl 172 +#define __NR_rt_sigreturn 173 +#define __NR_rt_sigaction 174 +#define __NR_rt_sigprocmask 175 +#define __NR_rt_sigpending 176 +#define __NR_rt_sigtimedwait 177 +#define __NR_rt_sigqueueinfo 178 +#define __NR_rt_sigsuspend 179 +#define __NR_pread64 180 +#define __NR_pwrite64 181 +#define __NR_lchown 182 +#define __NR_getcwd 183 +#define __NR_capget 184 +#define __NR_capset 185 +#define __NR_sigaltstack 186 +#define __NR_sendfile 187 +#define __NR_getpmsg 188 /* some people actually want streams */ +#define __NR_putpmsg 189 /* some people actually want streams */ +#define __NR_vfork 190 +#define __NR_ugetrlimit 191 +#define __NR_mmap2 192 +#define __NR_truncate64 193 +#define __NR_ftruncate64 194 +#define __NR_stat64 195 +#define __NR_lstat64 196 +#define __NR_fstat64 197 +#define __NR_chown32 198 +#define __NR_getuid32 199 +#define __NR_getgid32 200 +#define __NR_geteuid32 201 +#define __NR_getegid32 202 +#define __NR_setreuid32 203 +#define __NR_setregid32 204 +#define __NR_getgroups32 205 +#define __NR_setgroups32 206 +#define __NR_fchown32 207 +#define __NR_setresuid32 208 +#define __NR_getresuid32 209 +#define __NR_setresgid32 210 +#define __NR_getresgid32 211 +#define __NR_lchown32 212 +#define __NR_setuid32 213 +#define __NR_setgid32 214 +#define __NR_setfsuid32 215 +#define __NR_setfsgid32 216 +#define __NR_pivot_root 217 +#define __NR_getdents64 220 +#define __NR_gettid 221 +#define __NR_tkill 222 +#define __NR_setxattr 223 +#define __NR_lsetxattr 224 +#define __NR_fsetxattr 225 +#define __NR_getxattr 226 +#define __NR_lgetxattr 227 +#define __NR_fgetxattr 228 +#define __NR_listxattr 229 +#define __NR_llistxattr 230 +#define __NR_flistxattr 231 +#define __NR_removexattr 232 +#define __NR_lremovexattr 233 +#define __NR_fremovexattr 234 +#define __NR_futex 235 +#define __NR_sendfile64 236 +#define __NR_mincore 237 +#define __NR_madvise 238 +#define __NR_fcntl64 239 +#define __NR_readahead 240 +#define __NR_io_setup 241 +#define __NR_io_destroy 242 +#define __NR_io_getevents 243 +#define __NR_io_submit 244 +#define __NR_io_cancel 245 +#define __NR_fadvise64 246 +#define __NR_exit_group 247 +#define __NR_lookup_dcookie 248 +#define __NR_epoll_create 249 +#define __NR_epoll_ctl 250 +#define __NR_epoll_wait 251 +#define __NR_remap_file_pages 252 +#define __NR_set_tid_address 253 +#define __NR_timer_create 254 +#define __NR_timer_settime 255 +#define __NR_timer_gettime 256 +#define __NR_timer_getoverrun 257 +#define __NR_timer_delete 258 +#define __NR_clock_settime 259 +#define __NR_clock_gettime 260 +#define __NR_clock_getres 261 +#define __NR_clock_nanosleep 262 +#define __NR_statfs64 263 +#define __NR_fstatfs64 264 +#define __NR_tgkill 265 +#define __NR_utimes 266 +#define __NR_fadvise64_64 267 +#define __NR_mbind 268 +#define __NR_get_mempolicy 269 +#define __NR_set_mempolicy 270 +#define __NR_mq_open 271 +#define __NR_mq_unlink 272 +#define __NR_mq_timedsend 273 +#define __NR_mq_timedreceive 274 +#define __NR_mq_notify 275 +#define __NR_mq_getsetattr 276 +#define __NR_waitid 277 +#define __NR_vserver 278 +#define __NR_add_key 279 +#define __NR_request_key 280 +#define __NR_keyctl 281 +#define __NR_ioprio_set 282 +#define __NR_ioprio_get 283 +#define __NR_inotify_init 284 +#define __NR_inotify_add_watch 285 +#define __NR_inotify_rm_watch 286 +#define __NR_migrate_pages 287 +#define __NR_openat 288 +#define __NR_mkdirat 289 +#define __NR_mknodat 290 +#define __NR_fchownat 291 +#define __NR_futimesat 292 +#define __NR_fstatat64 293 +#define __NR_unlinkat 294 +#define __NR_renameat 295 +#define __NR_linkat 296 +#define __NR_symlinkat 297 +#define __NR_readlinkat 298 +#define __NR_fchmodat 299 +#define __NR_faccessat 300 +#define __NR_pselect6 301 +#define __NR_ppoll 302 +#define __NR_unshare 303 +#define __NR_set_robust_list 304 +#define __NR_get_robust_list 305 +#define __NR_splice 306 +#define __NR_sync_file_range 307 +#define __NR_tee 308 +#define __NR_vmsplice 309 +#define __NR_move_pages 310 +#define __NR_sched_setaffinity 311 +#define __NR_sched_getaffinity 312 +#define __NR_kexec_load 313 +#define __NR_getcpu 314 +#define __NR_epoll_pwait 315 +#define __NR_utimensat 316 +#define __NR_signalfd 317 +#define __NR_timerfd_create 318 +#define __NR_eventfd 319 +#define __NR_fallocate 320 +#define __NR_timerfd_settime 321 +#define __NR_timerfd_gettime 322 +#define __NR_signalfd4 323 +#define __NR_eventfd2 324 +#define __NR_epoll_create1 325 +#define __NR_dup3 326 +#define __NR_pipe2 327 +#define __NR_inotify_init1 328 + +#ifdef __KERNEL__ + +#define NR_syscalls 329 + +#define __ARCH_WANT_IPC_PARSE_VERSION +#define __ARCH_WANT_OLD_READDIR +#define __ARCH_WANT_OLD_STAT +#define __ARCH_WANT_STAT64 +#define __ARCH_WANT_SYS_ALARM +#define __ARCH_WANT_SYS_GETHOSTNAME +#define __ARCH_WANT_SYS_PAUSE +#define __ARCH_WANT_SYS_SGETMASK +#define __ARCH_WANT_SYS_SIGNAL +#define __ARCH_WANT_SYS_TIME +#define __ARCH_WANT_SYS_UTIME +#define __ARCH_WANT_SYS_WAITPID +#define __ARCH_WANT_SYS_SOCKETCALL +#define __ARCH_WANT_SYS_FADVISE64 +#define __ARCH_WANT_SYS_GETPGRP +#define __ARCH_WANT_SYS_LLSEEK +#define __ARCH_WANT_SYS_NICE +#define __ARCH_WANT_SYS_OLD_GETRLIMIT +#define __ARCH_WANT_SYS_OLDUMOUNT +#define __ARCH_WANT_SYS_SIGPENDING +#define __ARCH_WANT_SYS_SIGPROCMASK +#define __ARCH_WANT_SYS_RT_SIGACTION + +/* + * "Conditional" syscalls + * + * What we want is __attribute__((weak,alias("sys_ni_syscall"))), + * but it doesn't work on all toolchains, so we just do it by hand + */ +//#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall") +#define cond_syscall(x) long x(void) __attribute__((weak,alias("sys_ni_syscall"))) +#endif /* __KERNEL__ */ + +#endif /* _ASM_UBICOM32_UNISTD_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/user.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/user.h new file mode 100644 index 0000000000..2e79786ca9 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/user.h @@ -0,0 +1,82 @@ +/* + * arch/ubicom32/include/asm/user.h + * Ubicom32 architecture core file definitions. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_USER_H +#define _ASM_UBICOM32_USER_H + +#include <asm/ptrace.h> +#include <asm/page.h> +/* + * Adapted from <asm-powerpc/user.h> + * + * Core file format: The core file is written in such a way that gdb + * can understand it and provide useful information to the user (under + * linux we use the `trad-core' bfd, NOT the osf-core). The file contents + * are as follows: + * + * upage: 1 page consisting of a user struct that tells gdb + * what is present in the file. Directly after this is a + * copy of the task_struct, which is currently not used by gdb, + * but it may come in handy at some point. All of the registers + * are stored as part of the upage. The upage should always be + * only one page long. + * data: The data segment follows next. We use current->end_text to + * current->brk to pick up all of the user variables, plus any memory + * that may have been sbrk'ed. No attempt is made to determine if a + * page is demand-zero or if a page is totally unused, we just cover + * the entire range. All of the addresses are rounded in such a way + * that an integral number of pages is written. + * stack: We need the stack information in order to get a meaningful + * backtrace. We need to write the data from usp to + * current->start_stack, so we round each of these in order to be able + * to write an integer number of pages. + */ + +struct user_ubicom32fp_struct { +}; + +struct user { + struct pt_regs regs; /* entire machine state */ + size_t u_tsize; /* text size (pages) */ + size_t u_dsize; /* data size (pages) */ + size_t u_ssize; /* stack size (pages) */ + unsigned long start_code; /* text starting address */ + unsigned long start_data; /* data starting address */ + unsigned long start_stack; /* stack starting address */ + long int signal; /* signal causing core dump */ + unsigned long u_ar0; /* help gdb find registers */ + unsigned long magic; /* identifies a core file */ + char u_comm[32]; /* user command name */ +}; + +#define NBPG PAGE_SIZE +#define UPAGES 1 +#define HOST_TEXT_START_ADDR (u.start_code) +#define HOST_DATA_START_ADDR (u.start_data) +#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG) + +#endif /* _ASM_UBICOM32_USER_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/vdc_tio.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/vdc_tio.h new file mode 100644 index 0000000000..cc45fc552c --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/vdc_tio.h @@ -0,0 +1,129 @@ +/* + * arch/ubicom32/include/asm/vdc_tio.h + * Ubicom32 architecture VDC TIO definitions. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_VDC_TIO_H +#define _ASM_UBICOM32_VDC_TIO_H + +#include <asm/devtree.h> + +#define VDCTIO_VP_VERSION 5 + +#define VDCTIO_SCALE_FLAG_VSUB (1 << 9) +#define VDCTIO_SCALE_FLAG_YUV_SCAN_ORDER (1 << 8) +#define VDCTIO_SCALE_FLAG_YUV_BLOCK_ORDER (1 << 7) +#define VDCTIO_SCALE_FLAG_YUV (1 << 6) +#define VDCTIO_SCALE_FLAG_VRANGE_16_255 (1 << 5) +#define VDCTIO_SCALE_FLAG_VRANGE_0_255 (1 << 4) +#define VDCTIO_SCALE_FLAG_HSUB_2_1 (1 << 3) +#define VDCTIO_SCALE_FLAG_HSUB_1_1 (1 << 2) +#define VDCTIO_SCALE_FLAG_SET_FRAME_BUFFER (1 << 1) +#define VDCTIO_SCALE_FLAG_ENABLE (1 << 0) + +#define VDCTIO_NEXT_FRAME_FLAG_YUV_BIT 0 +#define VDCTIO_NEXT_FRAME_FLAG_YUV (1 << (VDCTIO_NEXT_FRAME_FLAG_YUV_BIT)) + +#define VDCTIO_CAPS_SUPPORTS_SCALING (1 << 0) + +#define VDCTIO_COMMAND_START (1 << 3) +#define VDCTIO_COMMAND_SET_COEFF (1 << 2) +#define VDCTIO_COMMAND_SET_LUT (1 << 1) +#define VDCTIO_COMMAND_SET_SCALE_MODE (1 << 0) + +/* + * Command / Data registers to access the VDC + */ +struct vdc_tio_vp_regs { + /* + * Version of this TIO register map + */ + u32_t version; + + volatile u32_t command; + + /* + * Next frame pointer, when the command VDCTIO_COMMAND_SET_FRAME_BUFFER is set, + * the vdc will take the pointer here and display it. + */ + void *next_frame; + u32_t next_frame_flags; + + /* + * These map directly into the PIXP registers 0x20-0x80. + * DO NOT change the order of these three variables. + */ + u32_t red_lut[6]; + u32_t blue_lut[6]; + u32_t green_lut[13]; + + /* + * These map directly into the PIXP registers 0x04, 0x08 + */ + u32_t coeff0; + u32_t coeff1; + + /* + * There are used to set the scaling parameters + */ + u32_t x_in; + u32_t x_out; + u32_t y_in; + u32_t y_out; + u32_t scale_flags; + + /* + * Current frame number, monotonically increasing number + */ + u32_t frame_number; + + /* + * These variables tell the guest OS what the underlying hardware looks like + */ + u32_t caps; + u32_t xres; + u32_t yres; + u32_t fb_align; + u8_t bpp; + u8_t rbits; + u8_t gbits; + u8_t bbits; + u8_t rshift; + u8_t gshift; + u8_t bshift; +}; + +/* + * Devtree node for VDC + */ +struct vdc_tio_node { + struct devtree_node dn; + + struct vdc_tio_vp_regs *regs; +}; + +extern void vdc_tio_init(void); + +#endif /* _ASM_UBICOM32_VDC_TIO_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/vga.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/vga.h new file mode 100644 index 0000000000..793435f8b1 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/vga.h @@ -0,0 +1,71 @@ +/* + * arch/ubicom32/include/asm/vga.h + * Ubicom32 low level VGA/frame buffer definitions. + * + * (C) Copyright 2009, Ubicom, Inc. + * (c) 1998 Martin Mares <mj@ucw.cz> + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ + +#ifndef _ASM_UBICOM32_VGA_H +#define _ASM_UBICOM32_VGA_H + +#include <asm/byteorder.h> + +/* + * On the PC, we can just recalculate addresses and then + * access the videoram directly without any black magic. + */ + +#define VGA_MAP_MEM(x, s) (0xb0000000L + (unsigned long)(x)) + +#define vga_readb(x) (*(x)) +#define vga_writeb(x, y) (*(y) = (x)) + +#define VT_BUF_HAVE_RW +/* + * These are only needed for supporting VGA or MDA text mode, which use little + * endian byte ordering. + * In other cases, we can optimize by using native byte ordering and + * <linux/vt_buffer.h> has already done the right job for us. + */ + +#undef scr_writew +#undef scr_readw + +static inline void scr_writew(u16 val, volatile u16 *addr) +{ + *addr = cpu_to_le16(val); +} + +static inline u16 scr_readw(volatile const u16 *addr) +{ + return le16_to_cpu(*addr); +} + +#define scr_memcpyw(d, s, c) memcpy(d, s, c) +#define scr_memmovew(d, s, c) memmove(d, s, c) +#define VT_BUF_HAVE_MEMCPYW +#define VT_BUF_HAVE_MEMMOVEW + +#endif /* _ASM_UBICOM32_VGA_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/xor.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/xor.h new file mode 100644 index 0000000000..31edcceb62 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/xor.h @@ -0,0 +1,33 @@ +/* + * arch/ubicom32/include/asm/xor.h + * Generic xor.h definitions for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _ASM_UBICOM32_XOR_H +#define _ASM_UBICOM32_XOR_H + +#include <asm-generic/xor.h> + +#endif /* _ASM_UBICOM32_XOR_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/kernel/Makefile b/target/linux/ubicom32/files/arch/ubicom32/kernel/Makefile new file mode 100644 index 0000000000..6294fa2eaa --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/kernel/Makefile @@ -0,0 +1,64 @@ +# +# arch/ubicom32/kernel/Makefile +# Main Makefile for the Ubicom32 arch directory. +# +# (C) Copyright 2009, Ubicom, Inc. +# +# This file is part of the Ubicom32 Linux Kernel Port. +# +# The Ubicom32 Linux Kernel Port is free software: you can redistribute +# it and/or modify it under the terms of the GNU General Public License +# as published by the Free Software Foundation, either version 2 of the +# License, or (at your option) any later version. +# +# The Ubicom32 Linux Kernel Port is distributed in the hope that it +# will be useful, but WITHOUT ANY WARRANTY; without even the implied +# warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See +# the GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with the Ubicom32 Linux Kernel Port. If not, +# see <http://www.gnu.org/licenses/>. +# +# Ubicom32 implementation derived from (with many thanks): +# arch/m68knommu +# arch/blackfin +# arch/parisc +# + +extra-y := head.o vmlinux.lds + +obj-y += \ + devtree.o \ + dma.o \ + flat.o \ + init_task.o \ + irq.o \ + ldsr.o \ + os_node.o \ + process.o \ + processor.o \ + ptrace.o \ + setup.o \ + signal.o \ + stacktrace.o \ + sys_ubicom32.o \ + syscalltable.o \ + thread.o \ + time.o \ + traps.o \ + ubicom32_context_switch.o \ + ubicom32_ksyms.o \ + ubicom32_syscall.o \ + unaligned_trap.o + +obj-$(CONFIG_MODULES) += module.o +obj-$(CONFIG_COMEMPCI) += comempci.o +obj-$(CONFIG_SMP) += smp.o topology.o +obj-$(CONFIG_ACCESS_OK_CHECKS_ENABLED) += uaccess.o +obj-$(CONFIG_GENERIC_CLOCKEVENTS) += timer_device.o +obj-$(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST) += timer_broadcast.o + +ifndef CONFIG_GENERIC_CLOCKEVENTS +obj-y += timer_tick.o +endif diff --git a/target/linux/ubicom32/files/arch/ubicom32/kernel/asm-offsets.c b/target/linux/ubicom32/files/arch/ubicom32/kernel/asm-offsets.c new file mode 100644 index 0000000000..639a536a18 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/kernel/asm-offsets.c @@ -0,0 +1,161 @@ +/* + * arch/ubicom32/kernel/asm-offsets.c + * Ubicom32 architecture definitions needed by assembly language modules. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +/* + * This program is used to generate definitions needed by + * assembly language modules. + * + * We use the technique used in the OSF Mach kernel code: + * generate asm statements containing #defines, + * compile this file to assembler, and then extract the + * #defines from the assembly-language output. + */ + +#include <linux/module.h> +#include <linux/stddef.h> +#include <linux/sched.h> +#include <linux/kernel_stat.h> +#include <linux/ptrace.h> +#include <linux/hardirq.h> +#include <asm/bootinfo.h> +#include <asm/irq.h> +#include <asm/thread_info.h> + +#define DEFINE(sym, val) \ + asm volatile("\n->" #sym " %0 " #val : : "i" (val)) + +#define BLANK() asm volatile("\n->" : : ) + +int main(void) +{ + /* offsets into the task struct */ + DEFINE(TASK_STATE, offsetof(struct task_struct, state)); + DEFINE(TASK_FLAGS, offsetof(struct task_struct, flags)); + DEFINE(TASK_PTRACE, offsetof(struct task_struct, ptrace)); + DEFINE(TASK_BLOCKED, offsetof(struct task_struct, blocked)); + DEFINE(TASK_THREAD, offsetof(struct task_struct, thread)); + DEFINE(TASK_THREAD_INFO, offsetof(struct task_struct, stack)); + DEFINE(TASK_MM, offsetof(struct task_struct, mm)); + DEFINE(TASK_ACTIVE_MM, offsetof(struct task_struct, active_mm)); + + /* offsets into the kernel_stat struct */ +// DEFINE(STAT_IRQ, offsetof(struct kernel_stat, irqs)); + + /* offsets into the irq_cpustat_t struct */ + DEFINE(CPUSTAT_SOFTIRQ_PENDING, offsetof(irq_cpustat_t, __softirq_pending)); + + /* offsets into the thread struct */ + DEFINE(THREAD_D10, offsetof(struct thread_struct, d10)); + DEFINE(THREAD_D11, offsetof(struct thread_struct, d11)); + DEFINE(THREAD_D12, offsetof(struct thread_struct, d12)); + DEFINE(THREAD_D13, offsetof(struct thread_struct, d13)); + DEFINE(THREAD_A1, offsetof(struct thread_struct, a1)); + DEFINE(THREAD_A2, offsetof(struct thread_struct, a2)); + DEFINE(THREAD_A5, offsetof(struct thread_struct, a5)); + DEFINE(THREAD_A6, offsetof(struct thread_struct, a6)); + DEFINE(THREAD_SP, offsetof(struct thread_struct, sp)); + + /* offsets into the pt_regs */ + DEFINE(PT_D0, offsetof(struct pt_regs, dn[0])); + DEFINE(PT_D1, offsetof(struct pt_regs, dn[1])); + DEFINE(PT_D2, offsetof(struct pt_regs, dn[2])); + DEFINE(PT_D3, offsetof(struct pt_regs, dn[3])); + DEFINE(PT_D4, offsetof(struct pt_regs, dn[4])); + DEFINE(PT_D5, offsetof(struct pt_regs, dn[5])); + DEFINE(PT_D6, offsetof(struct pt_regs, dn[6])); + DEFINE(PT_D7, offsetof(struct pt_regs, dn[7])); + DEFINE(PT_D8, offsetof(struct pt_regs, dn[8])); + DEFINE(PT_D9, offsetof(struct pt_regs, dn[9])); + DEFINE(PT_D10, offsetof(struct pt_regs, dn[10])); + DEFINE(PT_D11, offsetof(struct pt_regs, dn[11])); + DEFINE(PT_D12, offsetof(struct pt_regs, dn[12])); + DEFINE(PT_D13, offsetof(struct pt_regs, dn[13])); + DEFINE(PT_D14, offsetof(struct pt_regs, dn[14])); + DEFINE(PT_D15, offsetof(struct pt_regs, dn[15])); + DEFINE(PT_A0, offsetof(struct pt_regs, an[0])); + DEFINE(PT_A1, offsetof(struct pt_regs, an[1])); + DEFINE(PT_A2, offsetof(struct pt_regs, an[2])); + DEFINE(PT_A3, offsetof(struct pt_regs, an[3])); + DEFINE(PT_A4, offsetof(struct pt_regs, an[4])); + DEFINE(PT_A5, offsetof(struct pt_regs, an[5])); + DEFINE(PT_A6, offsetof(struct pt_regs, an[6])); + DEFINE(PT_A7, offsetof(struct pt_regs, an[7])); + DEFINE(PT_SP, offsetof(struct pt_regs, an[7])); + + DEFINE(PT_ACC0HI, offsetof(struct pt_regs, acc0[0])); + DEFINE(PT_ACC0LO, offsetof(struct pt_regs, acc0[1])); + DEFINE(PT_MAC_RC16, offsetof(struct pt_regs, mac_rc16)); + + DEFINE(PT_ACC1HI, offsetof(struct pt_regs, acc1[0])); + DEFINE(PT_ACC1LO, offsetof(struct pt_regs, acc1[1])); + + DEFINE(PT_SOURCE3, offsetof(struct pt_regs, source3)); + DEFINE(PT_INST_CNT, offsetof(struct pt_regs, inst_cnt)); + DEFINE(PT_CSR, offsetof(struct pt_regs, csr)); + DEFINE(PT_DUMMY_UNUSED, offsetof(struct pt_regs, dummy_unused)); + + DEFINE(PT_INT_MASK0, offsetof(struct pt_regs, int_mask0)); + DEFINE(PT_INT_MASK1, offsetof(struct pt_regs, int_mask1)); + + DEFINE(PT_PC, offsetof(struct pt_regs, pc)); + + DEFINE(PT_TRAP_CAUSE, offsetof(struct pt_regs, trap_cause)); + + DEFINE(PT_SIZE, sizeof(struct pt_regs)); + + DEFINE(PT_FRAME_TYPE, offsetof(struct pt_regs, frame_type)); + + DEFINE(PT_ORIGINAL_D0, offsetof(struct pt_regs, original_dn_0)); + DEFINE(PT_PREVIOUS_PC, offsetof(struct pt_regs, previous_pc)); + + /* offsets into the kernel_stat struct */ +// DEFINE(STAT_IRQ, offsetof(struct kernel_stat, irqs)); + + /* signal defines */ + DEFINE(SIGSEGV, SIGSEGV); + //DEFINE(SEGV_MAPERR, SEGV_MAPERR); + DEFINE(SIGTRAP, SIGTRAP); + //DEFINE(TRAP_TRACE, TRAP_TRACE); + + DEFINE(PT_PTRACED, PT_PTRACED); + DEFINE(PT_DTRACE, PT_DTRACE); + + DEFINE(ASM_THREAD_SIZE, THREAD_SIZE); + + /* Offsets in thread_info structure */ + DEFINE(TI_TASK, offsetof(struct thread_info, task)); + DEFINE(TI_EXECDOMAIN, offsetof(struct thread_info, exec_domain)); + DEFINE(TI_FLAGS, offsetof(struct thread_info, flags)); + DEFINE(TI_PREEMPTCOUNT, offsetof(struct thread_info, preempt_count)); + DEFINE(TI_CPU, offsetof(struct thread_info, cpu)); + DEFINE(TI_INTR_NESTING, offsetof(struct thread_info, interrupt_nesting)); + DEFINE(ASM_TIF_NEED_RESCHED, TIF_NEED_RESCHED); + DEFINE(ASM_TIF_SYSCALL_TRACE, TIF_SYSCALL_TRACE); + DEFINE(ASM_TIF_SIGPENDING, TIF_SIGPENDING); + + return 0; +} diff --git a/target/linux/ubicom32/files/arch/ubicom32/kernel/devtree.c b/target/linux/ubicom32/files/arch/ubicom32/kernel/devtree.c new file mode 100644 index 0000000000..1f824d2f15 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/kernel/devtree.c @@ -0,0 +1,173 @@ +/* + * arch/ubicom32/kernel/devtree.c + * Ubicom32 architecture device tree implementation. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/errno.h> +#include <asm/devtree.h> + +/* + * The device tree. + */ +struct devtree_node *devtree; + +/* + * devtree_print() + * Print the device tree. + */ +void devtree_print(void) +{ + struct devtree_node *p = devtree; + printk(KERN_INFO "Device Tree:\n"); + while (p) { + if (p->magic != DEVTREE_NODE_MAGIC) { + printk(KERN_EMERG + "device tree has improper node: %p\n", p); + return; + } + printk(KERN_INFO "\t%p: sendirq=%03d, recvirq=%03d, " + " name=%s\n", p, p->sendirq, p->recvirq, p->name); + p = p->next; + } +} +EXPORT_SYMBOL(devtree_print); + +/* + * devtree_irq() + * Return the IRQ(s) associated with devtree node. + */ +int devtree_irq(struct devtree_node *dn, + unsigned char *sendirq, + unsigned char *recvirq) +{ + if (dn->magic != DEVTREE_NODE_MAGIC) { + printk(KERN_EMERG "improper node: %p\n", dn); + if (sendirq) { + *sendirq = DEVTREE_IRQ_NONE; + } + if (recvirq) { + *recvirq = DEVTREE_IRQ_NONE; + } + return -EFAULT; + } + + /* + * Copy the devtree irq(s) to the output parameters. + */ + if (sendirq) { + *sendirq = dn->sendirq; + } + if (recvirq) { + *recvirq = dn->recvirq; + } + return 0; +} +EXPORT_SYMBOL(devtree_irq); + +/* + * devtree_find_next() + * Provide an iterator for walking the device tree. + */ +struct devtree_node *devtree_find_next(struct devtree_node **cur) +{ + struct devtree_node *p = *cur; + if (!p) { + *cur = devtree; + return devtree; + } + p = p->next; + *cur = p; + return p; +} + +/* + * devtree_find_by_irq() + * Return the node associated with a given irq. + */ +struct devtree_node *devtree_find_by_irq(uint8_t sendirq, uint8_t recvirq) +{ + struct devtree_node *p = devtree; + + if (sendirq == recvirq) { + printk(KERN_EMERG "identical request makes no sense sendirq = " + "%d, recvirq= %d\n", sendirq, recvirq); + return NULL; + } + + while (p) { + if (p->magic != DEVTREE_NODE_MAGIC) { + printk(KERN_EMERG + "device tree has improper node: %p\n", p); + return NULL; + } + + /* + * See if we can find a match on the IRQ(s) specified. + */ + if ((sendirq == p->sendirq) && (recvirq == p->recvirq)) { + return p; + } + + if ((sendirq == DEVTREE_IRQ_DONTCARE) && + (p->recvirq == recvirq)) { + return p; + } + + if ((recvirq == DEVTREE_IRQ_DONTCARE) && + (p->sendirq == sendirq)) { + return p; + } + + p = p->next; + } + return NULL; +} +EXPORT_SYMBOL(devtree_find_by_irq); + +/* + * devtree_find_node() + * Find a node in the device tree by name. + */ +struct devtree_node *devtree_find_node(const char *str) +{ + struct devtree_node *p = devtree; + while (p) { + if (p->magic != DEVTREE_NODE_MAGIC) { + printk(KERN_EMERG + "device tree has improper node: %p\n", p); + return NULL; + } + if (strcmp(p->name, str) == 0) { + return p; + } + p = p->next; + } + return NULL; +} +EXPORT_SYMBOL(devtree_find_node); diff --git a/target/linux/ubicom32/files/arch/ubicom32/kernel/dma.c b/target/linux/ubicom32/files/arch/ubicom32/kernel/dma.c new file mode 100644 index 0000000000..f61810532a --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/kernel/dma.c @@ -0,0 +1,60 @@ +/* + * arch/ubicom32/kernel/dma.c + * Ubicom32 architecture dynamic DMA mapping support. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + * + * We never have any address translations to worry about, so this + * is just alloc/free. + */ + +#include <linux/types.h> +#include <linux/mm.h> +#include <linux/string.h> +#include <linux/device.h> +#include <linux/io.h> + +void *dma_alloc_coherent(struct device *dev, size_t size, + dma_addr_t *dma_handle, int gfp) +{ + void *ret; + /* ignore region specifiers */ + gfp &= ~(__GFP_DMA | __GFP_HIGHMEM); + + if (dev == NULL || (*dev->dma_mask < 0xffffffff)) + gfp |= GFP_DMA; + ret = (void *)__get_free_pages(gfp, get_order(size)); + + if (ret != NULL) { + memset(ret, 0, size); + *dma_handle = virt_to_phys(ret); + } + return ret; +} + +void dma_free_coherent(struct device *dev, size_t size, + void *vaddr, dma_addr_t dma_handle) +{ + free_pages((unsigned long)vaddr, get_order(size)); +} diff --git a/target/linux/ubicom32/files/arch/ubicom32/kernel/flat.c b/target/linux/ubicom32/files/arch/ubicom32/kernel/flat.c new file mode 100644 index 0000000000..e8eb4595f1 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/kernel/flat.c @@ -0,0 +1,206 @@ +/* + * arch/ubicom32/kernel/flat.c + * Ubicom32 architecture flat executable format support. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#include <linux/module.h> +#include <linux/types.h> +#include <linux/flat.h> + +unsigned long ubicom32_flat_get_addr_from_rp(unsigned long *rp, + u32_t relval, + u32_t flags, + unsigned long *persistent) +{ + u32_t relval_reloc_type = relval >> 27; + u32_t insn = *rp; + + if (*persistent) { + /* + * relval holds the relocation that has to be adjusted. + */ + if (relval == 0) { + *persistent = 0; + } + + return relval; + } + + if (relval_reloc_type == R_UBICOM32_32) { + /* + * insn holds the relocation + */ + return insn; + } + + /* + * We don't know this one. + */ + return 0; +} + +void ubicom32_flat_put_addr_at_rp(unsigned long *rp, + u32_t val, + u32_t relval, + unsigned long *persistent) +{ + u32_t reloc_type = (relval >> 27) & 0x1f; + u32_t insn = *rp; + + /* + * If persistent is set then it contains the relocation type. + */ + if (*persistent) { + /* + * If persistent is set then it contains the relocation type. + */ + reloc_type = (*persistent >> 27) & 0x1f; + } + + switch (reloc_type) { + case R_UBICOM32_32: + /* + * Store the 32 bits as is. + */ + *rp = val; + break; + case R_UBICOM32_HI24: + { + /* + * 24 bit relocation that is part of the MOVEAI + * instruction. The 24 bits come from bits 7 - 30 of the + * relocation. The 24 bits eventually get split into 2 + * fields in the instruction encoding. + * + * - Bits 7 - 27 of the relocation are encoded into bits + * 0 - 20 of the instruction. + * + * - Bits 28 - 30 of the relocation are encoded into bit + * 24 - 26 of the instruction. + */ + u32_t mask = 0x1fffff | (0x7 << 24); + u32_t valid24bits = (val >> 7) & 0xffffff; + u32_t bot_21 = valid24bits & 0x1fffff; + u32_t upper_3_bits = ((valid24bits & 0xe00000) << 3); + insn &= ~mask; + + insn |= bot_21; + insn |= upper_3_bits; + *rp = insn; + } + break; + case R_UBICOM32_LO7_S: + case R_UBICOM32_LO7_2_S: + case R_UBICOM32_LO7_4_S: + { + /* + * Bits 0 - 6 of the relocation are encoded into the + * 7bit unsigned immediate fields of the SOURCE-1 field + * of the instruction. The immediate value is left + * shifted by (0, 1, 2) based on the operand size. + */ + u32_t mask = 0x1f | (0x3 << 8); + u32_t bottom, top; + val &= 0x7f; + if (reloc_type == R_UBICOM32_LO7_2_S) { + val >>= 1; + } else if (reloc_type == R_UBICOM32_LO7_4_S) { + val >>= 2; + } + + bottom = val & 0x1f; + top = val >> 5; + insn &= ~mask; + insn |= bottom; + insn |= (top << 8); + BUG_ON(*rp != insn); + *rp = insn; + break; + } + case R_UBICOM32_LO7_D: + case R_UBICOM32_LO7_2_D: + case R_UBICOM32_LO7_4_D: + { + /* + * Bits 0 - 6 of the relocation are encoded into the + * 7bit unsigned immediate fields of the DESTINATION + * field of the instruction. The immediate value is + * left shifted by (0, 1, 2) based on the operand size. + */ + u32_t mask = (0x1f | (0x3 << 8)) << 16; + u32_t bottom, top; + val &= 0x7f; + if (reloc_type == R_UBICOM32_LO7_2_D) { + val >>= 1; + } else if (reloc_type == R_UBICOM32_LO7_4_D) { + val >>= 2; + } + bottom = (val & 0x1f) << 16; + top = (val >> 5) << 16; + insn &= ~mask; + insn |= bottom; + insn |= (top << 8); + BUG_ON(*rp != insn); + *rp = insn; + break; + } + case R_UBICOM32_LO7_CALLI: + case R_UBICOM32_LO16_CALLI: + { + /* + * Extract the offset for a CALLI instruction. The + * offsets can be either 7 bits or 18 bits. Since all + * instructions in ubicom32 architecture are at work + * aligned addresses the truncated offset is right + * shifted by 2 before being encoded in the instruction. + */ + if (reloc_type == R_UBICOM32_LO7_CALLI) { + val &= 0x7f; + } else { + val &= 0x3ffff; + } + + val >>= 2; + + insn &= ~0x071f071f; + insn |= (val & 0x1f) << 0; + val >>= 5; + insn |= (val & 0x07) << 8; + val >>= 3; + insn |= (val & 0x1f) << 16; + val >>= 5; + insn |= (val & 0x07) << 24; + if (reloc_type == R_UBICOM32_LO7_CALLI) { + BUG_ON(*rp != insn); + } + *rp = insn; + } + break; + } + + if (*persistent) { + *persistent = 0; + } +} diff --git a/target/linux/ubicom32/files/arch/ubicom32/kernel/head.S b/target/linux/ubicom32/files/arch/ubicom32/kernel/head.S new file mode 100644 index 0000000000..0c60504af5 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/kernel/head.S @@ -0,0 +1,273 @@ +/* + * arch/ubicom32/kernel/head.S + * <TODO: Replace with short file description> + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#include <linux/sys.h> +#include <linux/linkage.h> +#include <asm/asm-offsets.h> +#include <asm/page_offset.h> +#define __ASM__ +#include <asm/ip5000.h> + + +#define SRC_AN A3 +#define DST_AN A4 + +#define PARAM_DN D0 +#define TMP_DN D15 +#define TMP2_DN D14 + +/* + * The following code is placed at the start of the Linux section of memory. + * This is the primary entry point for Linux. + * + * However, we also want the syscall entry/exit code to be at a fixed address. + * So we take the primary entry point and reserve 16 bytes. That address is + * where the system_call entry point exists. This 16 bytes basically allows + * us to jump around the system_call entry point code to the actual startup + * code. + * + * Linux Memory Map (see vlinux.lds.S): + * 0x40400000 - Primary Entry Point for Linux (jump around code below). + * 0x40400010 - Old syscall Entry Point. + */ + + .sect .skip_syscall, "ax", @progbits + .global __skip_syscall_section +__skip_syscall_section: + moveai A3, #%hi(_start) + lea.1 A3, %lo(_start)(A3) + ret A3 +/* + * __os_node_offset contains the offset from KERNELBASE to the os_node, it is + * not intended to be used by anything except the boot code. + */ +__os_node_offset: +.long (_os_node - KERNELSTART) + +.text +.global _start + +/* + * start() + * This is the start of the Linux kernel. + */ +_start: + move.4 SCRATCHPAD1, #0 + + +/* + * Setup the range registers... the loader has setup a few, but we will go ahead + * and correct them for our own limits. Note that once set these are never + * changed again. The ranges are as follows + * + * D_RANGE0 - io block (set up by loaded) + * + * I_RANGE0 and D_RANGE1 - kernel/ultra loader address space bottom of ocm-> top + * of ram typically 0x3ffc0000 - 0x440000000 + * I_RANGE1 - kernel / userspace transition area (aka syscalls, context switches) + * typically 0x3FFC0030 - ~0x3FFC0200 + * I_RANGE2 / D_RANGE2 - slab area + * typically 0x40A00000 - ~0x44000000 + * I_RANGE3 + * old system call interface if enabled. + * + * D_RANGE3, D_RANGE4 - unused. + */ + moveai SRC_AN, #%hi(PAGE_OFFSET_RAW) + lea.4 SRC_AN, %lo(PAGE_OFFSET_RAW)(SRC_AN) + move.4 D_RANGE1_LO, SRC_AN + move.4 I_RANGE0_LO, SRC_AN + +; don't try to calculate I_RANGE_HI, see below +; moveai SRC_AN, #%hi(___init_end-4) +; lea.4 SRC_AN, %lo(___init_end-4)(SRC_AN) +; move.4 I_RANGE0_HI, SRC_AN + + moveai SRC_AN, #%hi(SDRAMSTART + CONFIG_MIN_RAMSIZE-4) + lea.4 SRC_AN, %lo(SDRAMSTART + CONFIG_MIN_RAMSIZE-4)(SRC_AN) + move.4 D_RANGE1_HI, SRC_AN + +; for now allow the whole ram to be executable as well so we don't run into problems +; once we load user more code. + move.4 I_RANGE0_HI, SRC_AN + +#ifdef CONFIG_PROTECT_KERNEL +; when kernel protection is enabled, we only open up syscall and non kernel text +; for userspace apps, for now only irange registers registers 1 and 2 are used for userspace. + + ;; syscall range + moveai SRC_AN, #%hi(__syscall_text_run_begin) + lea.4 SRC_AN, %lo(__syscall_text_run_begin)(SRC_AN) + move.4 I_RANGE1_LO, SRC_AN + moveai SRC_AN, #%hi(__syscall_text_run_end) + lea.4 SRC_AN, %lo(__syscall_text_run_end)(SRC_AN) + move.4 I_RANGE1_HI, SRC_AN + + ;; slab instructions + moveai SRC_AN, #%hi(_edata) + lea.4 SRC_AN, %lo(_edata)(SRC_AN) + move.4 I_RANGE2_LO, SRC_AN + ;; End of DDR is already in range0 hi so just copy it. + move.4 I_RANGE2_HI, I_RANGE0_HI + +#ifdef CONFIG_OLD_40400010_SYSTEM_CALL + ;; create a small hole for old syscall location + moveai SRC_AN, #%hi(0x40400000) + lea.4 I_RANGE3_LO, 0x10(SRC_AN) + lea.4 I_RANGE3_HI, 0x14(SRC_AN) +#endif + ;; slab data (same as slab instructions but starting a little earlier). + moveai SRC_AN, #%hi(_data_protection_end) + lea.4 SRC_AN, %lo(_data_protection_end)(SRC_AN) + move.4 D_RANGE2_LO, SRC_AN + move.4 D_RANGE2_HI, I_RANGE0_HI + +;; enable ranges + ;; skip I_RANGE0_EN + move.4 I_RANGE1_EN, #-1 + move.4 I_RANGE2_EN, #-1 +#ifdef CONFIG_OLD_40400010_SYSTEM_CALL + move.4 I_RANGE3_EN, #-1 +#else + move.4 I_RANGE3_EN, #0 +#endif + ;; skip D_RANGE0_EN or D_RANGE1_EN + move.4 D_RANGE2_EN, #-1 + move.4 D_RANGE3_EN, #0 + move.4 D_RANGE4_EN, #0 +#endif + +; +; If __ocm_free_begin is smaller than __ocm_free_end the +; setup OCM text and data ram banks properly +; + moveai DST_AN, #%hi(__ocm_free_begin) + lea.4 TMP_DN, %lo(__ocm_free_begin)(DST_AN) + moveai DST_AN, #%hi(__ocm_free_end) + lea.4 TMP2_DN, %lo(__ocm_free_end)(DST_AN) + sub.4 #0, TMP2_DN, TMP_DN + jmple.f 2f + moveai DST_AN, #%hi(__data_begin) + lea.4 TMP_DN, %lo(__data_begin)(DST_AN) + moveai DST_AN, #%hi(OCMSTART) + lea.4 TMP2_DN, %lo(OCMSTART)(DST_AN) + sub.4 TMP_DN, TMP_DN, TMP2_DN + lsr.4 TMP_DN, TMP_DN, #15 + lsl.4 TMP_DN, #1, TMP_DN + moveai DST_AN, #%hi(OCMC_BASE) + add.4 OCMC_BANK_MASK(DST_AN), #-1, TMP_DN + pipe_flush 0 +2: +; +; Load .ocm_text +; + moveai DST_AN, #%hi(__ocm_text_run_end) + lea.4 TMP_DN, %lo(__ocm_text_run_end)(DST_AN) + moveai DST_AN, #%hi(__ocm_text_run_begin) + lea.4 DST_AN, %lo(__ocm_text_run_begin)(DST_AN) + moveai SRC_AN, #%hi(__ocm_text_load_begin) + lea.4 SRC_AN, %lo(__ocm_text_load_begin)(SRC_AN) + jmpt.t 2f + +1: move.4 (DST_AN)4++, (SRC_AN)4++ + +2: sub.4 #0, DST_AN, TMP_DN + jmpne.t 1b +; +; Load .syscall_text +; + moveai DST_AN, #%hi(__syscall_text_run_end) + lea.4 TMP_DN, %lo(__syscall_text_run_end)(DST_AN) + moveai DST_AN, #%hi(__syscall_text_run_begin) + lea.4 DST_AN, %lo(__syscall_text_run_begin)(DST_AN) + moveai SRC_AN, #%hi(__syscall_text_load_begin) + lea.4 SRC_AN, %lo(__syscall_text_load_begin)(SRC_AN) + jmpt.t 2f + +1: move.4 (DST_AN)4++, (SRC_AN)4++ + +2: sub.4 #0, DST_AN, TMP_DN + jmpne.t 1b + +; +; Load .ocm_data +; + moveai DST_AN, #%hi(__ocm_data_run_end) + lea.4 TMP_DN, %lo(__ocm_data_run_end)(DST_AN) + moveai DST_AN, #%hi(__ocm_data_run_begin) + lea.4 DST_AN, %lo(__ocm_data_run_begin)(DST_AN) + moveai SRC_AN, #%hi(__ocm_data_load_begin) + lea.4 SRC_AN, %lo(__ocm_data_load_begin)(SRC_AN) + jmpt.t 2f + +1: move.4 (DST_AN)4++, (SRC_AN)4++ + +2: sub.4 #0, DST_AN, TMP_DN + jmpne.t 1b + +; Clear .bss +; + moveai SRC_AN, #%hi(_ebss) + lea.4 TMP_DN, %lo(_ebss)(SRC_AN) + moveai DST_AN, #%hi(_sbss) + lea.4 DST_AN, %lo(_sbss)(DST_AN) + jmpt.t 2f + +1: move.4 (DST_AN)4++, #0 + +2: sub.4 #0, DST_AN, TMP_DN + jmpne.t 1b + +; save our parameter to devtree (after clearing .bss) + moveai DST_AN, #%hi(devtree) + lea.4 DST_AN, %lo(devtree)(DST_AN) + move.4 (DST_AN), PARAM_DN + + moveai sp, #%hi(init_thread_union) + lea.4 sp, %lo(init_thread_union)(sp) + movei TMP_DN, #ASM_THREAD_SIZE + add.4 sp, sp, TMP_DN + move.4 -4(sp)++, #0 ; nesting level = 0 + move.4 -4(sp)++, #1 ; KERNEL_THREAD + +;; ip3k-elf-gdb backend now sets scratchpad3 to 1 when either continue +;; or single step commands are issued. scratchpad3 is set to 0 when the +;; debugger detaches from the board. + move.4 TMP_DN, scratchpad3 + lsl.4 TMP_DN, TMP_DN, #0x0 + jmpeq.f _jump_to_start_kernel +_ok_to_set_break_points_in_linux: +;; THREAD_STALL + move.4 mt_dbg_active_clr,#-1 +;; stalling the threads isn't instantaneous.. need to flush the pipe. + pipe_flush 0 + pipe_flush 0 + +_jump_to_start_kernel: + moveai SRC_AN, #%hi(start_kernel) + lea.4 SRC_AN, %lo(start_kernel)(SRC_AN) + ret SRC_AN diff --git a/target/linux/ubicom32/files/arch/ubicom32/kernel/init_task.c b/target/linux/ubicom32/files/arch/ubicom32/kernel/init_task.c new file mode 100644 index 0000000000..ff0634424d --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/kernel/init_task.c @@ -0,0 +1,62 @@ +/* + * arch/ubicom32/kernel/init_task.c + * Ubicom32 architecture task initialization implementation. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/init.h> +#include <linux/init_task.h> +#include <linux/fs.h> +#include <linux/mqueue.h> +#include <linux/uaccess.h> +#include <asm/pgtable.h> + +///static struct fs_struct init_fs = INIT_FS; +static struct signal_struct init_signals = INIT_SIGNALS(init_signals); +static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand); +struct mm_struct init_mm = INIT_MM(init_mm); +EXPORT_SYMBOL(init_mm); + +/* + * Initial task structure. + * + * All other task structs will be allocated on slabs in fork.c + */ +struct task_struct init_task = INIT_TASK(init_task); + +EXPORT_SYMBOL(init_task); + +/* + * Initial thread structure. + * + * We need to make sure that this is 8192-byte aligned due to the + * way process stacks are handled. This is done by having a special + * "init_task" linker map entry.. + */ +union thread_union init_thread_union + __attribute__((__section__(".data.init_task"))) = + { INIT_THREAD_INFO(init_task) }; diff --git a/target/linux/ubicom32/files/arch/ubicom32/kernel/irq.c b/target/linux/ubicom32/files/arch/ubicom32/kernel/irq.c new file mode 100644 index 0000000000..c041f23e25 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/kernel/irq.c @@ -0,0 +1,597 @@ +/* + * arch/ubicom32/kernel/irq.c + * Ubicom32 architecture IRQ support. + * + * (C) Copyright 2009, Ubicom, Inc. + * (C) Copyright 2007, Greg Ungerer <gerg@snapgear.com> + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ + +#include <linux/types.h> +#include <linux/irq.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/kernel_stat.h> +#include <linux/module.h> +#include <linux/seq_file.h> +#include <linux/proc_fs.h> +#include <asm/system.h> +#include <asm/traps.h> +#include <asm/ldsr.h> +#include <asm/ip5000.h> +#include <asm/machdep.h> +#include <asm/asm-offsets.h> +#include <asm/thread.h> +#include <asm/devtree.h> + +unsigned int irq_soft_avail; +static struct irqaction ubicom32_reserve_action[NR_IRQS]; + +#if !defined(CONFIG_DEBUG_IRQMEASURE) +#define IRQ_DECLARE_MEASUREMENT +#define IRQ_MEASUREMENT_START() +#define IRQ_MEASUREMENT_END(irq) +#else +#define IRQ_DECLARE_MEASUREMENT \ + int __diff; \ + unsigned int __tstart; + +#define IRQ_MEASUREMENT_START() \ + __tstart = UBICOM32_IO_TIMER->sysval; + +#define IRQ_MEASUREMENT_END(irq) \ + __diff = (int)UBICOM32_IO_TIMER->sysval - (int)__tstart; \ + irq_measurement_update((irq), __diff); + +/* + * We keep track of the time spent in both irq_enter() + * and irq_exit(). + */ +#define IRQ_WEIGHT 32 + +struct irq_measurement { + volatile unsigned int min; + volatile unsigned int avg; + volatile unsigned int max; +}; + +static DEFINE_SPINLOCK(irq_measurement_lock); + +/* + * Add 1 in for softirq (irq_exit()); + */ +static struct irq_measurement irq_measurements[NR_IRQS + 1]; + +/* + * irq_measurement_update() + * Update an entry in the measurement array for this irq. + */ +static void irq_measurement_update(int irq, int sample) +{ + struct irq_measurement *im = &irq_measurements[irq]; + spin_lock(&irq_measurement_lock); + if ((im->min == 0) || (im->min > sample)) { + im->min = sample; + } + if (im->max < sample) { + im->max = sample; + } + im->avg = ((im->avg * (IRQ_WEIGHT - 1)) + sample) / IRQ_WEIGHT; + spin_unlock(&irq_measurement_lock); +} +#endif + +/* + * irq_kernel_stack_check() + * See if the kernel stack is within STACK_WARN of the end. + */ +static void irq_kernel_stack_check(int irq, struct pt_regs *regs) +{ +#ifdef CONFIG_DEBUG_STACKOVERFLOW + unsigned long sp; + + /* + * Make sure that we are not close to the top of the stack and thus + * can not really service this interrupt. + */ + asm volatile ( + "and.4 %0, SP, %1 \n\t" + : "=d" (sp) + : "d" (THREAD_SIZE - 1) + : "cc" + ); + + if (sp < (sizeof(struct thread_info) + STACK_WARN)) { + printk(KERN_WARNING + "cpu[%d]: possible overflow detected sp remain: %p, " + "irq: %d, regs: %p\n", + thread_get_self(), (void *)sp, irq, regs); + dump_stack(); + } + + if (sp < (sizeof(struct thread_info) + 16)) { + THREAD_STALL; + } +#endif +} + +/* + * irq_get_lsb() + * Get the LSB set in value + */ +static int irq_get_lsb(unsigned int value) +{ + static unsigned char irq_bits[8] = { + 3, 0, 1, 0, 2, 0, 1, 0 + }; + u32_t nextbit = 0; + + value = (value >> nextbit) | (value << ((sizeof(value) * 8) - nextbit)); + + /* + * It's unlikely that we find that we execute the body of this while + * loop. 50% of the time we won't take this at all and then of the + * cases where we do about 50% of those we only execute once. + */ + if (!(value & 0xffff)) { + nextbit += 0x10; + value >>= 16; + } + + if (!(value & 0xff)) { + nextbit += 0x08; + value >>= 8; + } + + if (!(value & 0xf)) { + nextbit += 0x04; + value >>= 4; + } + + nextbit += irq_bits[value & 0x7]; + if (nextbit > 63) { + panic("nextbit out of range: %d\n", nextbit); + } + return nextbit; +} + +/* + * ubicom32_reserve_handler() + * Bogus handler associated with pre-reserved IRQ(s). + */ +static irqreturn_t ubicom32_reserve_handler(int irq, void *dev_id) +{ + BUG(); + return IRQ_HANDLED; +} + +/* + * __irq_disable_vector() + * Disable the interrupt by clearing the appropriate bit in the + * LDSR Mask Register. + */ +static void __irq_disable_vector(unsigned int irq) +{ + ldsr_disable_vector(irq); +} + +/* + * __irq_ack_vector() + * Acknowledge the specific interrupt by clearing the associate bit in + * hardware + */ +static void __irq_ack_vector(unsigned int irq) +{ + if (irq < 32) { + asm volatile ("move.4 INT_CLR0, %0" : : "d" (1 << irq)); + } else { + asm volatile ("move.4 INT_CLR1, %0" : : "d" (1 << (irq - 32))); + } +} + +/* + * __irq_enable_vector() + * Clean and then enable the interrupt by setting the appropriate bit in + * the LDSR Mask Register. + */ +static void __irq_enable_vector(unsigned int irq) +{ + /* + * Acknowledge, really clear the vector. + */ + __irq_ack_vector(irq); + ldsr_enable_vector(irq); +} + +/* + * __irq_mask_vector() + */ +static void __irq_mask_vector(unsigned int irq) +{ + ldsr_mask_vector(irq); +} + +/* + * __irq_unmask_vector() + */ +static void __irq_unmask_vector(unsigned int irq) +{ + ldsr_unmask_vector(irq); +} + +/* + * __irq_end_vector() + * Called once an interrupt is completed (reset the LDSR mask). + */ +static void __irq_end_vector(unsigned int irq) +{ + ldsr_unmask_vector(irq); +} + +#if defined(CONFIG_SMP) +/* + * __irq_set_affinity() + * Set the cpu affinity for this interrupt. + * affinity container allocated at boot + */ +static void __irq_set_affinity(unsigned int irq, const struct cpumask *dest) +{ + smp_set_affinity(irq, dest); + cpumask_copy(irq_desc[irq].affinity, dest); +} +#endif + +/* + * On-Chip Generic Interrupt function handling. + */ +static struct irq_chip ubicom32_irq_chip = { + .name = "Ubicom32", + .startup = NULL, + .shutdown = NULL, + .enable = __irq_enable_vector, + .disable = __irq_disable_vector, + .ack = __irq_ack_vector, + .mask = __irq_mask_vector, + .unmask = __irq_unmask_vector, + .end = __irq_end_vector, +#if defined(CONFIG_SMP) + .set_affinity = __irq_set_affinity, +#endif +}; + +/* + * do_IRQ() + * Primary interface for handling IRQ() requests. + */ +asmlinkage void do_IRQ(int irq, struct pt_regs *regs) +{ + struct pt_regs *oldregs; + struct thread_info *ti = current_thread_info(); + + IRQ_DECLARE_MEASUREMENT; + + /* + * Mark that we are inside of an interrupt and + * that interrupts are disabled. + */ + oldregs = set_irq_regs(regs); + ti->interrupt_nesting++; + trace_hardirqs_off(); + irq_kernel_stack_check(irq, regs); + + /* + * Start the interrupt sequence + */ + irq_enter(); + + /* + * Execute the IRQ handler and any pending SoftIRQ requests. + */ + BUG_ON(!irqs_disabled()); + IRQ_MEASUREMENT_START(); + __do_IRQ(irq); + IRQ_MEASUREMENT_END(irq); + BUG_ON(!irqs_disabled()); + + /* + * TODO: Since IRQ's are disabled when calling irq_exit() + * modify Kconfig to set __ARCH_IRQ_EXIT_IRQS_DISABLED flag. + * This will slightly improve performance by enabling + * softirq handling to avoid disabling/disabled interrupts. + */ + IRQ_MEASUREMENT_START(); + irq_exit(); + IRQ_MEASUREMENT_END(NR_IRQS); + BUG_ON(!irqs_disabled()); + + /* + * Outside of an interrupt (or nested exit). + */ + set_irq_regs(oldregs); + trace_hardirqs_on(); + ti->interrupt_nesting--; +} + +/* + * irq_soft_alloc() + * Allocate a soft IRQ. + */ +int irq_soft_alloc(unsigned int *soft) +{ + if (irq_soft_avail == 0) { + printk(KERN_NOTICE "no soft irqs to allocate\n"); + return -EFAULT; + } + + *soft = irq_get_lsb(irq_soft_avail); + irq_soft_avail &= ~(1 << *soft); + return 0; +} + +/* + * ack_bad_irq() + * Called to handle an bad irq request. + */ +void ack_bad_irq(unsigned int irq) +{ + printk(KERN_ERR "IRQ: unexpected irq=%d\n", irq); + __irq_end_vector(irq); +} + +/* + * show_interrupts() + * Return a string that displays the state of each of the interrupts. + */ +int show_interrupts(struct seq_file *p, void *v) +{ + struct irqaction *ap; + int irq = *((loff_t *) v); + int j; + + if (irq >= NR_IRQS) { + return 0; + } + + if (irq == 0) { + seq_puts(p, " "); + for_each_online_cpu(j) { + seq_printf(p, "CPU%d ", j); + } + seq_putc(p, '\n'); + } + + ap = irq_desc[irq].action; + if (ap) { + seq_printf(p, "%3d: ", irq); + for_each_online_cpu(j) { + seq_printf(p, "%10u ", kstat_irqs_cpu(irq, j)); + } + seq_printf(p, "%14s ", irq_desc[irq].chip->name); + seq_printf(p, "%s", ap->name); + for (ap = ap->next; ap; ap = ap->next) { + seq_printf(p, ", %s", ap->name); + } + seq_putc(p, '\n'); + } + return 0; +} + +#if defined(CONFIG_DEBUG_IRQMEASURE) +static unsigned int irq_cycles_to_micro(unsigned int cycles, unsigned int frequency) +{ + unsigned int micro = (cycles / (frequency / 1000000)); + return micro; +} + +/* + * irq_measurement_show() + * Print out the min, avg, max values for each IRQ + * + * By request, the max value is reset after each dump. + */ +static int irq_measurement_show(struct seq_file *p, void *v) +{ + struct irqaction *ap; + unsigned int freq = processor_frequency(); + int irq = *((loff_t *) v); + + + if (irq == 0) { + seq_puts(p, "\tmin\tavg\tmax\t(micro-seconds)\n"); + } + + if (irq > NR_IRQS) { + return 0; + } + + if (irq == NR_IRQS) { + unsigned int min, avg, max; + spin_lock(&irq_measurement_lock); + min = irq_cycles_to_micro(irq_measurements[irq].min, freq); + avg = irq_cycles_to_micro(irq_measurements[irq].avg, freq); + max = irq_cycles_to_micro(irq_measurements[irq].max, freq); + irq_measurements[irq].max = 0; + spin_unlock(&irq_measurement_lock); + seq_printf(p, " \t%u\t%u\t%u\tsoftirq\n", min, avg, max); + return 0; + } + + ap = irq_desc[irq].action; + if (ap) { + unsigned int min, avg, max; + spin_lock(&irq_measurement_lock); + min = irq_cycles_to_micro(irq_measurements[irq].min, freq); + avg = irq_cycles_to_micro(irq_measurements[irq].avg, freq); + max = irq_cycles_to_micro(irq_measurements[irq].max, freq); + irq_measurements[irq].max = 0; + spin_unlock(&irq_measurement_lock); + seq_printf(p, "%2u:\t%u\t%u\t%u\t%s\n", irq, min, avg, max, ap->name); + } + return 0; +} + +static void *irq_measurement_start(struct seq_file *f, loff_t *pos) +{ + return (*pos <= NR_IRQS) ? pos : NULL; +} + +static void *irq_measurement_next(struct seq_file *f, void *v, loff_t *pos) +{ + (*pos)++; + if (*pos > NR_IRQS) + return NULL; + return pos; +} + +static void irq_measurement_stop(struct seq_file *f, void *v) +{ + /* Nothing to do */ +} + +static const struct seq_operations irq_measurement_seq_ops = { + .start = irq_measurement_start, + .next = irq_measurement_next, + .stop = irq_measurement_stop, + .show = irq_measurement_show, +}; + +static int irq_measurement_open(struct inode *inode, struct file *filp) +{ + return seq_open(filp, &irq_measurement_seq_ops); +} + +static const struct file_operations irq_measurement_fops = { + .open = irq_measurement_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release, +}; + +static int __init irq_measurement_init(void) +{ + proc_create("irq_measurements", 0, NULL, &irq_measurement_fops); + return 0; +} +module_init(irq_measurement_init); +#endif + +/* + * init_IRQ(void) + * Initialize the on-chip IRQ subsystem. + */ +void __init init_IRQ(void) +{ + int irq; + struct devtree_node *p = NULL; + struct devtree_node *iter = NULL; + unsigned int mask = 0; + unsigned int reserved = 0; + + /* + * Pull out the list of software interrupts that are avialable to + * Linux and provide an allocation function for them. The first + * 24 interrupts of INT0 are software interrupts. + */ + irq_soft_avail = 0; + if (processor_interrupts(&irq_soft_avail, NULL) < 0) { + printk(KERN_WARNING "No Soft IRQ(s) available\n"); + } + irq_soft_avail &= ((1 << 24) - 1); + + /* + * Initialize all of the on-chip interrupt handling + * to use a common set of interrupt functions. + */ + for (irq = 0; irq < NR_IRQS; irq++) { + irq_desc[irq].status = IRQ_DISABLED; + irq_desc[irq].action = NULL; + irq_desc[irq].depth = 1; + set_irq_chip(irq, &ubicom32_irq_chip); + } + + /* + * The sendirq of a devnode is not registered within Linux but instead + * is used by the software I/O thread. These interrupts are reserved. + * The recvirq is used by Linux and registered by a device driver, these + * are not reserved. + * + * recvirq(s) that are in the software interrupt range are not supposed + * to be marked as reserved. We track this while we scan the device + * nodes. + */ + p = devtree_find_next(&iter); + while (p) { + unsigned char sendirq, recvirq; + devtree_irq(p, &sendirq, &recvirq); + + /* + * If the sendirq is valid, mark that irq as taken by the + * devtree node. + */ + if (sendirq < NR_IRQS) { + ubicom32_reserve_action[sendirq].handler = + ubicom32_reserve_handler; + ubicom32_reserve_action[sendirq].name = p->name; + irq_desc[sendirq].action = + &ubicom32_reserve_action[sendirq]; + mask |= (1 << sendirq); + } + + /* + * Track the relevant recieve IRQ(s) + */ + if (recvirq < 24) { + mask |= (1 << recvirq); + } + + /* + * Move to the next node. + */ + p = devtree_find_next(&iter); + } + + /* + * Remove these bits from the irq_soft_avail list and then use the + * result as the list of pre-reserved IRQ(s). + */ + reserved = ~irq_soft_avail & ~mask; + for (irq = 0; irq < 24; irq++) { + if ((reserved & (1 << irq))) { + ubicom32_reserve_action[irq].handler = + ubicom32_reserve_handler; + ubicom32_reserve_action[irq].name = "reserved"; + irq_desc[irq].action = &ubicom32_reserve_action[irq]; + } + } + + /* + * Initialize the LDSR which is the Ubicom32 programmable + * interrupt controller. + */ + ldsr_init(); + + /* + * The Ubicom trap code needs a 2nd init after IRQ(s) are setup. + */ + trap_init_interrupt(); +} diff --git a/target/linux/ubicom32/files/arch/ubicom32/kernel/ldsr.c b/target/linux/ubicom32/files/arch/ubicom32/kernel/ldsr.c new file mode 100644 index 0000000000..a608d74cfe --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/kernel/ldsr.c @@ -0,0 +1,1185 @@ +/* + * arch/ubicom32/kernel/ldsr.c + * Ubicom32 architecture Linux Device Services Driver Interface + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + * + * NOTES: + * + * The LDSR is a programmable interrupt controller that is written in software. + * It emulates the behavior of an pic by fielding the interrupts, choosing a + * victim thread to take the interrupt and forcing that thread to take a context + * switch to the appropriate interrupt handler. + * + * Because traps are treated as just a special class of interrupts, the LDSR + * also handles the processing of traps. + * + * Because we compile Linux both UP and SMP, we need the LDSR to use + * architectural locking that is not "compiled out" when compiling UP. For now, + * we use the single atomic bit lock. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/profile.h> +#include <linux/clocksource.h> +#include <linux/types.h> +#include <linux/module.h> +#include <linux/cpumask.h> +#include <linux/bug.h> +#include <linux/delay.h> +#include <asm/ip5000.h> +#include <asm/atomic.h> +#include <asm/machdep.h> +#include <asm/asm-offsets.h> +#include <asm/traps.h> +#include <asm/thread.h> +#include <asm/range-protect.h> + +/* + * One can not print from the LDSR so the best we can do is + * check a condition and stall all of the threads. + */ + +// #define DEBUG_LDSR 1 +#if defined(DEBUG_LDSR) +#define DEBUG_ASSERT(cond) \ + if (!(cond)) { \ + THREAD_STALL; \ + } +#else +#define DEBUG_ASSERT(cond) +#endif + +/* + * Make global so that we can use it in the RFI code in assembly. + */ +unsigned int ldsr_soft_irq_mask; +EXPORT_SYMBOL(ldsr_soft_irq_mask); + +static unsigned int ldsr_suspend_mask; +static unsigned int ldsr_soft_irq; +static unsigned int ldsr_stack_space[1024]; + +static struct ldsr_register_bank { + volatile unsigned int enabled0; + volatile unsigned int enabled1; + volatile unsigned int mask0; + volatile unsigned int mask1; + unsigned int total; + unsigned int retry; + unsigned int backout; +} ldsr_interrupt; + +/* + * Which thread/cpu are we? + */ +static int ldsr_tid = -1; + +#if defined(CONFIG_IRQSTACKS) +/* + * per-CPU IRQ stacks (thread information and stack) + * + * NOTE: Do not use DEFINE_PER_CPU() as it makes it harder + * to find the location of ctx from assembly language. + */ +union irq_ctx { + struct thread_info tinfo; + u32 stack[THREAD_SIZE/sizeof(u32)]; +}; +static union irq_ctx *percpu_irq_ctxs[NR_CPUS]; + +/* + * Storage for the interrupt stack. + */ +#if !defined(CONFIG_IRQSTACKS_USEOCM) +static char percpu_irq_stacks[(NR_CPUS * THREAD_SIZE) + (THREAD_SIZE - 1)]; +#else +/* + * For OCM, the linker will ensure that space is allocated for the stack + * see (vmlinux.lds.S) + */ +static char percpu_irq_stacks[]; +#endif + +#endif + +/* + * Save trap IRQ because we need to un-suspend if it gets set. + */ +static unsigned int ldsr_trap_irq_mask; +static unsigned int ldsr_trap_irq; + +/* + * ret_from_interrupt_to_kernel + * Just restore the context and do nothing else. + */ +asmlinkage void ret_from_interrupt_to_kernel(void)__attribute__((naked)); + +/* + * ret_from_interrupt_to_user + * Call scheduler if needed. Just restore the context. + */ +asmlinkage void ret_from_interrupt_to_user(void)__attribute__((naked)); + +#ifdef DEBUG_LDSR +u32_t old_sp, old_pc, old_a0, old_a5, old_a3; +struct pt_regs copy_regs, *copy_save_area; +#endif + +int __user_mode(unsigned long sp) +{ + + u32_t saved_stack_base = sp & ~(ASM_THREAD_SIZE - 1); +#if defined(CONFIG_IRQSTACKS_USEOCM) + if ((union irq_ctx *)saved_stack_base == percpu_irq_ctxs[smp_processor_id()]) { + /* + * On the interrupt stack. + */ + return 0; + } +#endif + + if (!(u32_t)current) { + return 0; + } + return saved_stack_base != ((u32_t)current->stack); +} + +/* + * ldsr_lock_release() + * Release the LDSR lock. + */ +static void ldsr_lock_release(void) +{ + UBICOM32_UNLOCK(LDSR_LOCK_BIT); +} + +/* + * ldsr_lock_acquire() + * Acquire the LDSR lock, spin if not available. + */ +static void ldsr_lock_acquire(void) +{ + UBICOM32_LOCK(LDSR_LOCK_BIT); +} + +/* + * ldsr_thread_irq_disable() + * Disable interrupts for the specified thread. + */ +static void ldsr_thread_irq_disable(unsigned int tid) +{ + unsigned int mask = (1 << tid); + + asm volatile ( + " or.4 scratchpad1, scratchpad1, %0 \n\t" + : + : "d"(mask) + : "cc" + ); +} + +/* + * ldsr_thread_get_interrupts() + * Get the interrupt state for all threads. + */ +static unsigned long ldsr_thread_get_interrupts(void) +{ + unsigned long ret = 0; + asm volatile ( + " move.4 %0, scratchpad1 \n\t" + : "=r" (ret) + : + ); + return ret; +} + +/* + * ldsr_emulate_and_run() + * Emulate the instruction and then set the thread to run. + */ +static void ldsr_emulate_and_run(unsigned int tid) +{ + unsigned int thread_mask = (1 << tid); + u32_t write_csr = (tid << 15) | (1 << 14); + + /* + * Emulate the unaligned access. + */ + unaligned_emulate(tid); + + /* + * Get the thread back in a running state. + */ + asm volatile ( + " setcsr %0 \n\t" + " setcsr_flush 0 \n\t" + " move.4 trap_cause, #0 \n\t" /* Clear the trap cause + * register */ + " setcsr #0 \n\t" + " setcsr_flush 0 \n\t" + " move.4 mt_dbg_active_set, %1 \n\t" /* Activate thread even if + * in dbg/fault state */ + " move.4 mt_active_set, %1 \n\t" /* Restart target + * thread. */ + : + : "r" (write_csr), "d" (thread_mask) + : "cc" + ); + thread_enable_mask(thread_mask); +} + +/* + * ldsr_preemptive_context_save() + * save thread context from another hardware thread. The other thread must + * be stalled. + */ +static inline void ldsr_preemptive_context_save(u32_t thread, + struct pt_regs *regs) +{ + /* + * Save the current state of the specified thread + */ + asm volatile ( + " move.4 a3, %0 \n\t" + + /* set src1 from the target thread */ + " move.4 csr, %1 \n\t" + " setcsr_flush 0 \n\t" + " setcsr_flush 0 \n\t" + + /* copy state from the other thread */ + " move.4 "D(PT_D0)"(a3), d0 \n\t" + " move.4 "D(PT_D1)"(a3), d1 \n\t" + " move.4 "D(PT_D2)"(a3), d2 \n\t" + " move.4 "D(PT_D3)"(a3), d3 \n\t" + " move.4 "D(PT_D4)"(a3), d4 \n\t" + " move.4 "D(PT_D5)"(a3), d5 \n\t" + " move.4 "D(PT_D6)"(a3), d6 \n\t" + " move.4 "D(PT_D7)"(a3), d7 \n\t" + " move.4 "D(PT_D8)"(a3), d8 \n\t" + " move.4 "D(PT_D9)"(a3), d9 \n\t" + " move.4 "D(PT_D10)"(a3), d10 \n\t" + " move.4 "D(PT_D11)"(a3), d11 \n\t" + " move.4 "D(PT_D12)"(a3), d12 \n\t" + " move.4 "D(PT_D13)"(a3), d13 \n\t" + " move.4 "D(PT_D14)"(a3), d14 \n\t" + " move.4 "D(PT_D15)"(a3), d15 \n\t" + " move.4 "D(PT_A0)"(a3), a0 \n\t" + " move.4 "D(PT_A1)"(a3), a1 \n\t" + " move.4 "D(PT_A2)"(a3), a2 \n\t" + " move.4 "D(PT_A3)"(a3), a3 \n\t" + " move.4 "D(PT_A4)"(a3), a4 \n\t" + " move.4 "D(PT_A5)"(a3), a5 \n\t" + " move.4 "D(PT_A6)"(a3), a6 \n\t" + " move.4 "D(PT_SP)"(a3), a7 \n\t" + " move.4 "D(PT_ACC0HI)"(a3), acc0_hi \n\t" + " move.4 "D(PT_ACC0LO)"(a3), acc0_lo \n\t" + " move.4 "D(PT_MAC_RC16)"(a3), mac_rc16 \n\t" + " move.4 "D(PT_ACC1HI)"(a3), acc1_hi \n\t" + " move.4 "D(PT_ACC1LO)"(a3), acc1_lo \n\t" + " move.4 "D(PT_SOURCE3)"(a3), source3 \n\t" + " move.4 "D(PT_INST_CNT)"(a3), inst_cnt \n\t" + " move.4 "D(PT_CSR)"(a3), csr \n\t" + " move.4 "D(PT_DUMMY_UNUSED)"(a3), #0 \n\t" + " move.4 "D(PT_INT_MASK0)"(a3), int_mask0 \n\t" + " move.4 "D(PT_INT_MASK1)"(a3), int_mask1 \n\t" + " move.4 "D(PT_TRAP_CAUSE)"(a3), trap_cause \n\t" + " move.4 "D(PT_PC)"(a3), pc \n\t" + " move.4 "D(PT_PREVIOUS_PC)"(a3), previous_pc \n\t" + /* disable csr thread select */ + " movei csr, #0 \n\t" + " setcsr_flush 0 \n\t" + : + : "r" (regs->dn), "d" ((thread << 9) | (1 << 8)) + : "a3" + ); +} + +/* + * ldsr_rotate_threads() + * Simple round robin algorithm for choosing the next cpu + */ +static int ldsr_rotate_threads(unsigned long cpus) +{ + static unsigned char ldsr_bits[8] = { + 3, 0, 1, 0, 2, 0, 1, 0 + }; + + static int nextbit; + int thisbit; + + /* + * Move the interrupts down so that we consider interrupts from where + * we left off, then take the interrupts we would lose and move them + * to the top half of the interrupts value. + */ + cpus = (cpus >> nextbit) | (cpus << ((sizeof(cpus) * 8) - nextbit)); + + /* + * 50% of the time we won't take this at all and then of the cases where + * we do about 50% of those we only execute once. + */ + if (!(cpus & 0xffff)) { + nextbit += 16; + cpus >>= 16; + } + + if (!(cpus & 0xff)) { + nextbit += 8; + cpus >>= 8; + } + + if (!(cpus & 0xf)) { + nextbit += 4; + cpus >>= 4; + } + + nextbit += ldsr_bits[cpus & 0x7]; + thisbit = (nextbit & ((sizeof(cpus) * 8) - 1)); + nextbit = (thisbit + 1) & ((sizeof(cpus) * 8) - 1); + DEBUG_ASSERT(thisbit < THREAD_ARCHITECTURAL_MAX); + return thisbit; +} + +/* + * ldsr_rotate_interrupts() + * Get rotating next set bit value. + */ +static int ldsr_rotate_interrupts(unsigned long long interrupts) +{ + static unsigned char ldsr_bits[8] = { + 3, 0, 1, 0, 2, 0, 1, 0 + }; + + static int nextbit; + int thisbit; + + /* + * Move the interrupts down so that we consider interrupts from where + * we left off, then take the interrupts we would lose and move them + * to the top half of the interrupts value. + */ + interrupts = (interrupts >> nextbit) | + (interrupts << ((sizeof(interrupts) * 8) - nextbit)); + + /* + * 50% of the time we won't take this at all and then of the cases where + * we do about 50% of those we only execute once. + */ + if (!(interrupts & 0xffffffff)) { + nextbit += 32; + interrupts >>= 32; + } + + if (!(interrupts & 0xffff)) { + nextbit += 16; + interrupts >>= 16; + } + + if (!(interrupts & 0xff)) { + nextbit += 8; + interrupts >>= 8; + } + + if (!(interrupts & 0xf)) { + nextbit += 4; + interrupts >>= 4; + } + + nextbit += ldsr_bits[interrupts & 0x7]; + thisbit = (nextbit & ((sizeof(interrupts) * 8) - 1)); + nextbit = (thisbit + 1) & ((sizeof(interrupts) * 8) - 1); + + DEBUG_ASSERT(thisbit < (sizeof(interrupts) * 8)); + return thisbit; +} + +/* + * ldsr_backout_or_irq() + * + * One way or the other this interrupt is not being + * processed, make sure that it is reset. We are + * not going to call irq_end_vector() so unmask the + * interrupt. + */ +static void ldsr_backout_of_irq(int vector, unsigned long tid_mask) +{ +#if defined(CONFIG_SMP) + if (unlikely(vector == smp_ipi_irq)) { + smp_reset_ipi(tid_mask); + } +#endif + ldsr_unmask_vector(vector); + ldsr_interrupt.backout++; +} + +#if defined(CONFIG_IRQSTACKS) +/* + * ldsr_choose_savearea_and_returnvec() + * Test our current state (user, kernel, interrupt) and set things up. + * + * This version of the function uses 3 stacks and nests interrupts + * on the interrupt stack. + */ +static struct pt_regs *ldsr_choose_savearea_and_returnvec(thread_t tid, u32_t linux_sp, u32_t *pvec) +{ + struct pt_regs *save_area; + u32_t masked_linux_sp = linux_sp & ~(THREAD_SIZE - 1); + struct thread_info * ti= (struct thread_info *)sw_ksp[tid]; + +#if defined(CONFIG_SMP) + union irq_ctx *icp = percpu_irq_ctxs[tid]; +#else + union irq_ctx *icp = percpu_irq_ctxs[0]; +#endif + + if (masked_linux_sp == (u32_t)icp) { + /* + * Fault/Interrupt occurred while on the interrupt stack. + */ + save_area = (struct pt_regs *)((char *)linux_sp - sizeof(struct pt_regs) - 8); + *pvec = (u32_t)(&ret_from_interrupt_to_kernel); + } else { + /* + * Fault/Interrupt occurred while on user/kernel stack. This is a new + * first use of the interrupt stack. + */ + save_area = (struct pt_regs *) ((char *)icp + sizeof(icp->stack) - sizeof(struct pt_regs) - 8); + if (masked_linux_sp == (u32_t)ti) { + *pvec = (u32_t)(&ret_from_interrupt_to_kernel); + } else { + *pvec = (u32_t)(&ret_from_interrupt_to_user); + } + + /* + * Because the softirq code will execute on the "interrupt" stack, we + * need to maintain the knowledge of what "task" was executing on the + * cpu. This is done by copying the thread_info->task from the cpu + * we are about to context switch into the interrupt contexts thread_info + * structure. + */ + icp->tinfo.task = ti->task; + icp->tinfo.preempt_count = + (icp->tinfo.preempt_count & ~SOFTIRQ_MASK) | + (ti->preempt_count & SOFTIRQ_MASK); + icp->tinfo.interrupt_nesting = 0; + } + save_area->nesting_level = icp->tinfo.interrupt_nesting; + return save_area; +} + +#else +/* + * ldsr_choose_savearea_and_returnvec() + * Test our current state (user, kernel, interrupt) and set things up. + * + * The version of the function uses just the user & kernel stack and + * nests interrupts on the existing kernel stack. + */ +static struct pt_regs *ldsr_choose_savearea_and_returnvec(thread_t tid, u32_t linux_sp, u32_t *pvec) +{ + struct pt_regs *save_area; + u32_t masked_linux_sp = linux_sp & ~(THREAD_SIZE - 1); + struct thread_info *ti = (struct thread_info *)sw_ksp[tid]; + + if (masked_linux_sp == (u32_t)ti) { + /* + * Fault/Interrupt occurred while on the kernel stack. + */ + save_area = (struct pt_regs *)((char *)linux_sp - sizeof(struct pt_regs) - 8); + *pvec = (u32_t) (&ret_from_interrupt_to_kernel); + } else { + /* + * Fault/Interrupt occurred while on user stack. + */ + ti->interrupt_nesting = 0; + save_area = (struct pt_regs *)((u32_t)ti + THREAD_SIZE - sizeof(struct pt_regs) - 8); + *pvec = (u32_t) (&ret_from_interrupt_to_user); + } + save_area->nesting_level = ti->interrupt_nesting; + return save_area; +} +#endif + +/* + * ldsr_ctxsw_thread() + * Context switch a mainline thread to execute do_IRQ() for the specified + * vector. + */ +static void ldsr_ctxsw_thread(int vector, thread_t tid) +{ + u32_t linux_sp; + u32_t return_vector; + struct pt_regs *save_area, *regs; + u32_t thread_mask = (1 << tid); + u32_t read_csr = ((tid << 9) | (1 << 8)); + u32_t write_csr = (tid << 15) | (1 << 14); + u32_t interrupt_vector = (u32_t)(&do_IRQ); + + unsigned int frame_type = UBICOM32_FRAME_TYPE_INTERRUPT; + + + DEBUG_ASSERT(!thread_is_enabled(tid)); + + /* + * Acquire the necessary global and per thread locks for tid. + * As a side effect, we ensure that the thread has not trapped + * and return true if it has. + */ + if (unlikely(thread_is_trapped(tid))) { + /* + * Read the trap cause, the sp and clear the MT_TRAP bits. + */ + unsigned int cause; + asm volatile ( + " setcsr %3 \n\t" + " setcsr_flush 0 \n\t" + " setcsr_flush 0 \n\t" + " move.4 %0, TRAP_CAUSE \n\t" + " move.4 %1, SP \n\t" + " setcsr #0 \n\t" + " setcsr_flush 0 \n\t" + " move.4 MT_BREAK_CLR, %2\n\t" + " move.4 MT_TRAP_CLR, %2 \n\t" + : "=&r" (cause), "=&r" (linux_sp) + : "r" (thread_mask), "m" (read_csr) + ); + + ldsr_backout_of_irq(vector, (1 << tid)); + +#if !defined(CONFIG_UNALIGNED_ACCESS_DISABLED) + /* + * See if the unaligned trap handler can deal with this. + * If so, emulate the instruction and then just restart + * the thread. + */ + if (unaligned_only(cause)) { +#if defined(CONFIG_UNALIGNED_ACCESS_USERSPACE_ONLY) + /* + * Check if this is a kernel stack if so we will not + * handle the trap + */ + u32_t masked_linux_sp = linux_sp & ~(THREAD_SIZE - 1); + if ((masked_linux_sp != (u32_t)sw_ksp[tid]) && + unaligned_only(cause)) { + ldsr_emulate_and_run(tid); + return; + } +#else + ldsr_emulate_and_run(tid); + return; +#endif + + } +#endif + + interrupt_vector = (u32_t)(&trap_handler); + frame_type = UBICOM32_FRAME_TYPE_TRAP; + } else { + /* + * Read the target thread's SP + */ + asm volatile ( + " setcsr %1 \n\t" + " setcsr_flush 0 \n\t" + " setcsr_flush 0 \n\t" + " move.4 %0, SP \n\t" + " setcsr #0 \n\t" + " setcsr_flush 0 \n\t" + : "=m" (linux_sp) + : "m" (read_csr) + ); + } + + /* + * We are delivering an interrupt, count it. + */ + ldsr_interrupt.total++; + + /* + * At this point, we will definitely force this thread to + * a new context, show its interrupts as disabled. + */ + ldsr_thread_irq_disable(tid); + + /* + * Test our current state (user, kernel, interrupt). Save the + * appropriate data and setup for the return. + */ + save_area = ldsr_choose_savearea_and_returnvec(tid, linux_sp, &return_vector); + + /* + * The pt_regs (save_area) contains the type of thread that we are dealing + * with (KERNEL/NORMAL) and is copied into each pt_regs area. We get this + * from the current tasks kernel pt_regs area that always exists at the + * top of the kernel stack. + */ + regs = (struct pt_regs *)((u32_t)sw_ksp[tid] + THREAD_SIZE - sizeof(struct pt_regs) - 8); + save_area->thread_type = regs->thread_type; + + /* + * Preserve the context of the Linux thread. + */ + ldsr_preemptive_context_save(tid, save_area); + + /* + * Load the fram_type into the save_area. + */ + save_area->frame_type = frame_type; + +#ifdef CONFIG_STOP_ON_TRAP + /* + * Before we get backtrace and showing stacks working well, it sometimes + * helps to enter the debugger when a trap occurs before we change the + * thread to handle the fault. This optional code causes all threads to + * stop on every trap frame. One assumes that GDB connected via the + * mailbox interface will be used to recover from this state. + */ + if (frame_type == UBICOM32_FRAME_TYPE_TRAP) { + THREAD_STALL; + } +#endif + +#ifdef DEBUG_LDSR + copy_regs = *save_area; + copy_save_area = save_area; + + old_a0 = save_area->an[0]; + old_a3 = save_area->an[3]; + old_sp = save_area->an[7]; + old_a5 = save_area->an[5]; + old_pc = save_area->pc; +#endif + + /* + * Now we have to switch the kernel thread to run do_IRQ function. + * Set pc to do_IRQ + * Set d0 to vector + * Set d1 to save_area. + * Set a5 to the proper return vector. + */ + asm volatile ( + " setcsr %0 \n\t" + " setcsr_flush 0 \n\t" + " move.4 d0, %5 \n\t" /* d0 = 0 vector # */ + " move.4 d1, %1 \n\t" /* d1 = save_area */ + " move.4 sp, %1 \n\t" /* sp = save_area */ + " move.4 a5, %2 \n\t" /* a5 = return_vector */ + " move.4 pc, %3 \n\t" /* pc = do_IRQ routine. */ + " move.4 trap_cause, #0 \n\t" /* Clear the trap cause + * register */ + " setcsr #0 \n\t" + " setcsr_flush 0 \n\t" + " enable_kernel_ranges %4 \n\t" + " move.4 mt_dbg_active_set, %4 \n\t" /* Activate thread even if + * in dbg/fault state */ + " move.4 mt_active_set, %4 \n\t" /* Restart target + * thread. */ + : + : "r" (write_csr), "r" (save_area), + "r" (return_vector), "r" (interrupt_vector), + "d" (thread_mask), "r" (vector) + : "cc" + ); + thread_enable_mask(thread_mask); +} + +/* + * ldsr_deliver_interrupt() + * Deliver the interrupt to one of the threads or all of the threads. + */ +static void ldsr_deliver_interrupt(int vector, + unsigned long deliver_to, + int all) +{ + unsigned long disabled_threads; + unsigned long possible_threads; + unsigned long trapped_threads; + unsigned long global_locks; + + /* + * Disable all of the threads that we might want to send + * this interrupt to. + */ +retry: + DEBUG_ASSERT(deliver_to); + thread_disable_mask(deliver_to); + + /* + * If any threads are in the trap state, we have to service the + * trap for those threads first. + */ + asm volatile ( + "move.4 %0, MT_TRAP \n\t" + : "=r" (trapped_threads) + : + ); + + trapped_threads &= deliver_to; + if (unlikely(trapped_threads)) { + /* + * all traps will be handled, so clear the trap bit before restarting any threads + */ + ubicom32_clear_interrupt(ldsr_trap_irq); + + /* + * Let the remaining untrapped threads, continue. + */ + deliver_to &= ~trapped_threads; + if (deliver_to) { + thread_enable_mask(deliver_to); + } + + /* + * For the trapped threads force them to handle + * a trap. + */ + while (trapped_threads) { + unsigned long which = ffz(~trapped_threads); + trapped_threads &= ~(1 << which); + ldsr_ctxsw_thread(vector, which); + } + return; + } + + /* + * Can we deliver an interrupt to any of the threads? + */ + disabled_threads = ldsr_thread_get_interrupts(); + possible_threads = deliver_to & ~disabled_threads; + if (unlikely(!possible_threads)) { +#if defined(CONFIG_SMP) + /* + * In the SMP case, we can not wait because 1 cpu might be + * sending an IPI to another cpu which is currently blocked. + * The only way to ensure IPI delivery is to backout and + * keep trying. For SMP, we don't sleep until the interrupts + * are delivered. + */ + thread_enable_mask(deliver_to); + ldsr_backout_of_irq(vector, deliver_to); + return; +#else + /* + * In the UP case, we have nothing to do so we should wait. + * + * Since the INT_MASK0 and INT_MASK1 are "re-loaded" before we + * suspend in the outer loop, we do not need to save them here. + * + * We test that we were awakened for our specific interrupts + * because the ldsr mask/unmask operations will force the ldsr + * awake even if the interrupt on the mainline thread is not + * completed. + */ + unsigned int scratch = 0; + thread_enable_mask(deliver_to); + asm volatile ( + " move.4 INT_MASK0, %1 \n\t" + " move.4 INT_MASK1, #0 \n\t" + + "1: suspend \n\t" + " move.4 %0, INT_STAT0 \n\t" + " and.4 %0, %0, %1 \n\t" + " jmpeq.f 1b \n\t" + + " move.4 INT_CLR0, %2 \n\t" + : "+r" (scratch) + : "d" (ldsr_suspend_mask), "r" (ldsr_soft_irq_mask) + : "cc" + ); + + /* + * This delay is sized to coincide with the time it takes a + * thread to complete the exit (see return_from_interrupt). + */ + ldsr_interrupt.retry++; + __delay(10); + goto retry; +#endif + } + + /* + * If any of the global locks are held, we can not deliver any + * interrupts, we spin delay(10) and then try again. If our + * spinning becomes a bottle neck, we will need to suspend but for + * now lets just spin. + */ + asm volatile ( + "move.4 %0, scratchpad1 \n\t" + : "=r" (global_locks) + : + ); + if (unlikely(global_locks & 0xffff0000)) { + thread_enable_mask(deliver_to); + + /* + * This delay is sized to coincide with the average time it + * takes a thread to release a global lock. + */ + ldsr_interrupt.retry++; + __delay(10); + goto retry; + } + + /* + * Deliver to one cpu. + */ + if (!all) { + /* + * Find our victim and then enable everyone else. + */ + unsigned long victim = ldsr_rotate_threads(possible_threads); + DEBUG_ASSERT((deliver_to & (1 << victim))); + DEBUG_ASSERT((possible_threads & (1 << victim))); + + deliver_to &= ~(1 << victim); + if (deliver_to) { + thread_enable_mask(deliver_to); + } + ldsr_ctxsw_thread(vector, victim); + return; + } + + /* + * If we can't deliver to some threads, wake them + * back up and reset things to deliver to them. + */ + deliver_to &= ~possible_threads; + if (unlikely(deliver_to)) { + thread_enable_mask(deliver_to); + ldsr_backout_of_irq(vector, deliver_to); + } + + /* + * Deliver to all possible threads(s). + */ + while (possible_threads) { + unsigned long victim = ffz(~possible_threads); + possible_threads &= ~(1 << victim); + ldsr_ctxsw_thread(vector, victim); + } +} + +/* + * ldsr_thread() + * This thread acts as the interrupt controller for Linux. + */ +static void ldsr_thread(void *arg) +{ + int stat0; + int stat1; + int interrupt0; + int interrupt1; + long long interrupts; + unsigned long cpus; + +#if !defined(CONFIG_SMP) + /* + * In a non-smp configuration, we can not use the cpu(s) arrays because + * there is not a 1-1 correspondence between cpus(s) and our threads. + * Thus we must get a local idea of the mainline threads and use the + * one and only 1 set as the victim. We do this once before the ldsr + * loop. + * + * In the SMP case, we will use the cpu(s) map to determine which cpu(s) + * are valid to send interrupts to. + */ + int victim = 0; + unsigned int mainline = thread_get_mainline(); + if (mainline == 0) { + panic("no mainline Linux threads to interrupt"); + return; + } + victim = ffz(~mainline); + cpus = (1 << victim); +#endif + + while (1) { + /* + * If one changes this code not to reload the INT_MASK(s), you + * need to know that code in the lock waiting above does not + * reset the MASK registers back; so that code will need to be + * changed. + */ + ldsr_lock_acquire(); + asm volatile ( + " move.4 INT_MASK0, %0 \n\t" + " move.4 INT_MASK1, %1 \n\t" + : + : "U4" (ldsr_interrupt.mask0), "U4" (ldsr_interrupt.mask1) + ); + ldsr_lock_release(); + thread_suspend(); + + /* + * Read the interrupt status registers + */ + asm volatile ( + "move.4 %0, INT_STAT0 \n\t" + "move.4 %1, INT_STAT1 \n\t" + : "=r" (stat0), "=r" (stat1) + : + ); + + /* + * We only care about interrupts that we have been told to care + * about. The interrupt must be enabled, unmasked, and have + * occurred in the hardware. + */ + ldsr_lock_acquire(); + interrupt0 = ldsr_interrupt.enabled0 & + ldsr_interrupt.mask0 & stat0; + interrupt1 = ldsr_interrupt.enabled1 & + ldsr_interrupt.mask1 & stat1; + ldsr_lock_release(); + + /* + * For each interrupt in the "snapshot" we will mask the + * interrupt handle the interrupt (typically calling do_IRQ()). + * + * The interrupt is unmasked by desc->chip->end() function in + * the per chip generic interrupt handling code + * (arch/ubicom32/kernel/irq.c).8 + */ + interrupts = ((unsigned long long)interrupt1 << 32) | + interrupt0; + while (interrupts) { + int all = 0; + int vector = ldsr_rotate_interrupts(interrupts); + interrupts &= ~((unsigned long long)1 << vector); + + /* + * Now mask off this vector so that the LDSR ignores + * it until it is acknowledged. + */ + ldsr_mask_vector(vector); +#if !defined(CONFIG_SMP) + ldsr_deliver_interrupt(vector, cpus, all); +#else + cpus = smp_get_affinity(vector, &all); + if (!cpus) { + /* + * No CPU to deliver to so just leave + * the interrupt unmasked and increase + * the backout count. We will eventually + * return and deliver it again. + */ + ldsr_unmask_vector(vector); + ldsr_interrupt.backout++; + continue; + } + ldsr_deliver_interrupt(vector, cpus, all); +#endif + } + } + + /* NOTREACHED */ +} + +/* + * ldsr_mask_vector() + * Temporarily mask the interrupt vector, turn off the bit in the mask + * register. + */ +void ldsr_mask_vector(unsigned int vector) +{ + unsigned int mask; + if (vector < 32) { + mask = ~(1 << vector); + ldsr_lock_acquire(); + ldsr_interrupt.mask0 &= mask; + ldsr_lock_release(); + thread_resume(ldsr_tid); + return; + } + + mask = ~(1 << (vector - 32)); + ldsr_lock_acquire(); + ldsr_interrupt.mask1 &= mask; + ldsr_lock_release(); + thread_resume(ldsr_tid); +} + +/* + * ldsr_unmask_vector() + * Unmask the interrupt vector so that it can be used, turn on the bit in + * the mask register. + * + * Because it is legal for the interrupt path to disable an interrupt, + * the unmasking code must ensure that disabled interrupts are not + * unmasked. + */ +void ldsr_unmask_vector(unsigned int vector) +{ + unsigned int mask; + if (vector < 32) { + mask = (1 << vector); + ldsr_lock_acquire(); + ldsr_interrupt.mask0 |= (mask & ldsr_interrupt.enabled0); + ldsr_lock_release(); + thread_resume(ldsr_tid); + return; + } + + mask = (1 << (vector - 32)); + ldsr_lock_acquire(); + ldsr_interrupt.mask1 |= (mask & ldsr_interrupt.enabled1); + ldsr_lock_release(); + thread_resume(ldsr_tid); +} + +/* + * ldsr_enable_vector() + * The LDSR implements an interrupt controller and has a local (to the + * LDSR) copy of its interrupt mask. + */ +void ldsr_enable_vector(unsigned int vector) +{ + unsigned int mask; + if (vector < 32) { + mask = (1 << vector); + ldsr_lock_acquire(); + ldsr_interrupt.enabled0 |= mask; + ldsr_interrupt.mask0 |= mask; + ldsr_lock_release(); + thread_resume(ldsr_tid); + return; + } + + mask = (1 << (vector - 32)); + ldsr_lock_acquire(); + ldsr_interrupt.enabled1 |= mask; + ldsr_interrupt.mask1 |= mask; + ldsr_lock_release(); + thread_resume(ldsr_tid); +} + +/* + * ldsr_disable_vector() + * The LDSR implements an interrupt controller and has a local (to the + * LDSR) copy of its interrupt mask. + */ +void ldsr_disable_vector(unsigned int vector) +{ + unsigned int mask; + + if (vector < 32) { + mask = ~(1 << vector); + ldsr_lock_acquire(); + ldsr_interrupt.enabled0 &= mask; + ldsr_interrupt.mask0 &= mask; + ldsr_lock_release(); + thread_resume(ldsr_tid); + return; + } + + mask = ~(1 << (vector - 32)); + ldsr_lock_acquire(); + ldsr_interrupt.enabled1 &= mask; + ldsr_interrupt.mask1 &= mask; + ldsr_lock_release(); + thread_resume(ldsr_tid); +} + +/* + * ldsr_get_threadid() + * Return the threadid of the LDSR thread. + */ +thread_t ldsr_get_threadid(void) +{ + return ldsr_tid; +} + +/* + * ldsr_set_trap_irq() + * Save away the trap Soft IRQ + * + * See the per thread lock suspend code above for an explination. + */ +void ldsr_set_trap_irq(unsigned int irq) +{ + ldsr_trap_irq = irq; + ldsr_trap_irq_mask = (1 << irq); + ldsr_suspend_mask |= ldsr_trap_irq_mask; +} + +/* + * ldsr_init() + * Initialize the LDSR (Interrupt Controller) + */ +void ldsr_init(void) +{ +#if defined(CONFIG_IRQSTACKS) + int i; + union irq_ctx *icp; +#endif + + void *stack_high = (void *)ldsr_stack_space; + stack_high += sizeof(ldsr_stack_space); + stack_high -= 8; + + + /* + * Obtain a soft IRQ to use + */ + if (irq_soft_alloc(&ldsr_soft_irq) < 0) { + panic("no software IRQ is available\n"); + return; + } + ldsr_soft_irq_mask |= (1 << ldsr_soft_irq); + ldsr_suspend_mask |= ldsr_soft_irq_mask; + + /* + * Now allocate and start the LDSR thread. + */ + ldsr_tid = thread_alloc(); + if (ldsr_tid < 0) { + panic("no thread available to run LDSR"); + return; + } + +#if defined(CONFIG_IRQSTACKS) + /* + * Initialize the per-cpu irq thread_info structure that + * is at the top of each per-cpu irq stack. + */ + icp = (union irq_ctx *) + (((unsigned long)percpu_irq_stacks + (THREAD_SIZE - 1)) & ~(THREAD_SIZE - 1)); + for (i = 0; i < NR_CPUS; i++) { + struct thread_info *ti = &(icp->tinfo); + ti->task = NULL; + ti->exec_domain = NULL; + ti->cpu = i; + ti->preempt_count = 0; + ti->interrupt_nesting = 0; + percpu_irq_ctxs[i] = icp++; + } +#endif + thread_start(ldsr_tid, ldsr_thread, NULL, + stack_high, THREAD_TYPE_NORMAL); +} diff --git a/target/linux/ubicom32/files/arch/ubicom32/kernel/module.c b/target/linux/ubicom32/files/arch/ubicom32/kernel/module.c new file mode 100644 index 0000000000..3d29dc2b83 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/kernel/module.c @@ -0,0 +1,463 @@ +/* + * arch/ubicom32/kernel/module.c + * Ubicom32 architecture loadable module support. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#include <linux/moduleloader.h> +#include <linux/bug.h> +#include <linux/elf.h> +#include <linux/vmalloc.h> +#include <linux/fs.h> +#include <linux/string.h> +#include <linux/kernel.h> +#include <asm/ocm-alloc.h> + +#if 0 +#define DEBUGP printk +#else +#define DEBUGP(fmt...) +#endif + +static void _module_free_ocm(struct module *mod) +{ + printk(KERN_INFO "module arch cleanup %s: OCM instruction memory free " + " of %d @%p\n", mod->name, mod->arch.ocm_inst_size, + mod->arch.ocm_inst); + + if (mod->arch.ocm_inst) { + ocm_inst_free(mod->arch.ocm_inst); + mod->arch.ocm_inst = 0; + mod->arch.ocm_inst_size = 0; + } +} + +void *module_alloc(unsigned long size) +{ + if (size == 0) + return NULL; + return vmalloc(size); +} + + +/* Free memory returned from module_alloc */ +void module_free(struct module *mod, void *module_region) +{ + vfree(module_region); + /* FIXME: If module_region == mod->init_region, trim exception + table entries. */ + + /* + * This is expected to be final module free, use this to prune the + * ocm + */ + if (module_region && module_region == mod->module_core) + _module_free_ocm(mod); + +} + +/* + * module_frob_arch_sections() + * Called from kernel/module.c allowing arch specific handling of + * sections/headers. + */ +int module_frob_arch_sections(Elf_Ehdr *hdr, + Elf_Shdr *sechdrs, + char *secstrings, + struct module *mod) +{ + Elf_Shdr *s, *sechdrs_end; + void *ocm_inst = NULL; + int ocm_inst_size = 0; + + /* + * Ubicom32 v3 and v4 are almost binary compatible but not completely. + * To be safe check that the module was compiled with the correct -march + * which is flags. + */ +#ifdef CONFIG_UBICOM32_V4 + if ((hdr->e_flags & 0xFFFF) != EF_UBICOM32_V4) { + printk(KERN_WARNING "Module %s was not compiled for " + "ubicom32v4, elf_flags:%x,\n", + mod->name, hdr->e_flags); + return -ENOEXEC; + } +#elif defined CONFIG_UBICOM32_V3 + if ((hdr->e_flags & 0xFFFF) != EF_UBICOM32_V3) { + printk(KERN_WARNING "Module %s was not compiled for " + "ubicom32v3, elf_flags:%x\n", + mod->name, hdr->e_flags); + return -ENOEXEC; + } +#else +#error Unknown/Unsupported ubicom32 architecture. +#endif + + /* + * XXX: sechdrs are vmalloced in kernel/module.c + * and would be vfreed just after module is loaded, + * so we hack to keep the only information we needed + * in mod->arch to correctly free L1 I/D sram later. + * NOTE: this breaks the semantic of mod->arch structure. + */ + sechdrs_end = sechdrs + hdr->e_shnum; + for (s = sechdrs; s < sechdrs_end; ++s) { + if (strncmp(".ocm_text", secstrings + s->sh_name, 9) == 0) + ocm_inst_size += s->sh_size; + } + + if (!ocm_inst_size) + return 0; + + ocm_inst = ocm_inst_alloc(ocm_inst_size, 0 /* internal */); + if (ocm_inst == NULL) { +#ifdef CONFIG_OCM_MODULES_FALLBACK_TO_DDR + printk(KERN_WARNING + "module %s: OCM instruction memory allocation of %d" + "failed, fallback to DDR\n", mod->name, ocm_inst_size); + return 0; +#else + printk(KERN_ERR + "module %s: OCM instruction memory allocation of %d" + "failed.\n", mod->name, ocm_inst_size); + return -ENOMEM; +#endif + } + + mod->arch.ocm_inst = ocm_inst; + mod->arch.ocm_inst_size = ocm_inst_size; + + printk(KERN_INFO + "module %s: OCM instruction memory allocation of %d @%p\n", + mod->name, mod->arch.ocm_inst_size, mod->arch.ocm_inst); + + for (s = sechdrs; s < sechdrs_end; ++s) { + if (strncmp(".ocm_text", secstrings + s->sh_name, 9) == 0) { + memcpy(ocm_inst, (void *)s->sh_addr, s->sh_size); + s->sh_flags &= ~SHF_ALLOC; + s->sh_addr = (unsigned long)ocm_inst; + ocm_inst += s->sh_size; + } + } + + return 0; +} + +int apply_relocate(Elf32_Shdr *sechdrs, + const char *strtab, + unsigned int symindex, + unsigned int relsec, + struct module *me) +{ + DEBUGP("Invalid Applying relocate section %u to %u\n", relsec, + sechdrs[relsec].sh_info); + return -EINVAL; +} + +int apply_relocate_add(Elf32_Shdr *sechdrs, + const char *strtab, + unsigned int symindex, + unsigned int relsec, + struct module *me) +{ + unsigned int i; + Elf32_Rela *rel = (void *)sechdrs[relsec].sh_addr; + Elf32_Sym *sym; + uint32_t *location; + uint32_t insn; + + DEBUGP("Applying relocate_add section %u to %u\n", relsec, + sechdrs[relsec].sh_info); + for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) { + uint32_t v; + const int elf32_rtype = ELF32_R_TYPE(rel[i].r_info); + + /* This is where to make the change */ + location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr + + rel[i].r_offset; + /* This is the symbol it is referring to. Note that all + undefined symbols have been resolved. */ + sym = (Elf32_Sym *)sechdrs[symindex].sh_addr + + ELF32_R_SYM(rel[i].r_info); + + v = rel[i].r_addend + sym->st_value; + + + switch (elf32_rtype) { + case R_UBICOM32_32: + { + /* + * Store the 32 bit relocation as is. + */ + *location = v; + break; + } + case R_UBICOM32_HI24: + { + /* + * 24 bit relocation that is part of the MOVEAI + * instruction. The 24 bits come from bits 7 - 30 of the + * relocation. Theses bits eventually get split into 2 + * fields in the instruction encoding. + * + * - Bits 7 - 27 of the relocation are encoded into bits + * 0 - 20 of the instruction. + * + * - Bits 28 - 30 of the relocation are encoded into + * bit 24 - 26 of the instruction. + */ + uint32_t valid24 = (v >> 7) & 0xffffff; + insn = *location; + + insn &= ~(0x1fffff | (0x7 << 24)); + insn |= (valid24 & 0x1fffff); + insn |= ((valid24 & 0xe00000) << 3); + *location = insn; + } + break; + case R_UBICOM32_LO7_S: + case R_UBICOM32_LO7_2_S: + case R_UBICOM32_LO7_4_S: + { + /* + * Bits 0 - 6 of the relocation are encoded into the + * 7bit unsigned immediate fields of the SOURCE-1 field + * of the instruction. The immediate value is left + * shifted by (0, 1, 2) based on the operand size. + */ + uint32_t valid7 = v & 0x7f; + insn = *location; + + if (elf32_rtype == R_UBICOM32_LO7_2_S) { + valid7 >>= 1; + } else if (elf32_rtype == R_UBICOM32_LO7_4_S) { + valid7 >>= 2; + } + + insn &= ~(0x1f | (0x3 << 8)); + insn |= (valid7 & 0x1f); + insn |= ((valid7 & 0x60) << 3); + *location = insn; + } + break; + case R_UBICOM32_LO7_D: + case R_UBICOM32_LO7_2_D: + case R_UBICOM32_LO7_4_D: + { + /* + * Bits 0 - 6 of the relocation are encoded into the + * 7bit unsigned immediate fields of the DESTINATION + * field of the instruction. The immediate value is + * left shifted by (0, 1, 2) based on the operand size. + */ + uint32_t valid7 = v & 0x7f; + insn = *location; + + if (elf32_rtype == R_UBICOM32_LO7_2_D) { + valid7 >>= 1; + } else if (elf32_rtype == R_UBICOM32_LO7_4_D) { + valid7 >>= 2; + } + + insn &= ~((0x1f | (0x3 << 8)) << 16); + insn |= ((valid7 & 0x1f) << 16); + insn |= ((valid7 & 0x60) << 19); + *location = insn; + } + break; + case R_UBICOM32_LO7_CALLI: + case R_UBICOM32_LO16_CALLI: + { + /* + * Extract the offset for a CALLI instruction. The + * offsets can be either 7 bits or 18 bits. Since all + * instructions in ubicom32 architecture are at work + * aligned addresses the truncated offset is right + * shifted by 2 before being encoded in the instruction. + */ + uint32_t val; + if (elf32_rtype == R_UBICOM32_LO7_CALLI) { + val = v & 0x7f; + } else { + val = v & 0x3ffff; + } + + val >>= 2; + + insn = *location; + + insn &= ~0x071f071f; + insn |= (val & 0x1f) << 0; + val >>= 5; + insn |= (val & 0x07) << 8; + val >>= 3; + insn |= (val & 0x1f) << 16; + val >>= 5; + insn |= (val & 0x07) << 24; + *location = insn; + } + break; + case R_UBICOM32_24_PCREL: + { + /* + * Extract 26 bit signed PC relative offset for CALL + * instructions. Since instruction addresses are word + * aligned the offset is right shited by 2 before + * encoding into instruction. + */ + int32_t val = v - (int32_t)location; + + /* + * Check that the top 7 bits are all equal to the sign + * bit (26), i.e all 0's or all 1's. If they are not then + * the absolute difference is greater than 25 bits. + */ + if (((uint32_t)val & 0xFE000000) != 0xFE000000 && + ((uint32_t)val & 0xFE000000) != 0x0) { + /* + * The relocation is beyond our addressable + * range with a 26 bit call. + */ + printk(KERN_ERR "module %s: PC Relative " + "relocation out of range: " + "%u (%x->%x, %x)\n", + me->name, elf32_rtype, + v, (uint32_t) location, val); + return -ENOEXEC; + } + + val = (val & 0x3ffffff) >> 2; + insn = *location; + insn = insn & 0xf8e00000; + + insn |= (val >> 21) << 24; + insn |= (val & 0x1fffff); + *location = insn; + } + break; + case R_UBICOM32_LO16: + case R_UBICOM32_HI16: + { + /* + * 16 bit immediate value that is encoded into bit 0 - + * 15 of the instruction. + */ + uint32_t val; + + if (elf32_rtype == R_UBICOM32_LO16) { + val = v & 0xffff; + } else { + val = (v >> 16) & 0xffff; + } + + insn = *location; + insn &= 0xffff0000; + + insn |= val; + *location = insn; + } + break; + case R_UBICOM32_21_PCREL: + { + /* + * Extract 23 bit signed PC relative offset for JMP<cc> + * instructions. Since instruction addresses are word + * aligned the offset is right shited by 2 before + * encoding into instruction. + */ + int32_t val = v - (int32_t)location; + + val = (val & 0x7fffff) >> 2; + insn = *location; + insn = insn & 0xffe00000; + + insn |= (val >> 21) << 24; + insn |= val; + *location = insn; + } + break; + default: + BUG(); + printk(KERN_ERR "module %s: Unknown relocation: %u\n", + me->name, elf32_rtype); + return -ENOEXEC; + } + } + return 0; +} + +int module_finalize(const Elf_Ehdr *hdr, + const Elf_Shdr *sechdrs, + struct module *mod) +{ + unsigned int i, strindex = 0, symindex = 0; + char *secstrings; + int err; + + err = module_bug_finalize(hdr, sechdrs, mod); + if (err) + return err; + + if (!mod->arch.ocm_inst) { + /* + * No OCM code, so nothing more to do. + */ + return 0; + } + + secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset; + + for (i = 1; i < hdr->e_shnum; i++) { + /* Internal symbols and strings. */ + if (sechdrs[i].sh_type == SHT_SYMTAB) { + symindex = i; + strindex = sechdrs[i].sh_link; + } + } + + for (i = 1; i < hdr->e_shnum; i++) { + const char *strtab = (char *)sechdrs[strindex].sh_addr; + unsigned int info = sechdrs[i].sh_info; + + /* Not a valid relocation section? */ + if (info >= hdr->e_shnum) + continue; + + if ((sechdrs[i].sh_type == SHT_RELA) && + (strncmp(".rela.ocm_text", + secstrings + sechdrs[i].sh_name, 5 + 9) == 0)) { + err = apply_relocate_add((Elf_Shdr *) sechdrs, strtab, + symindex, i, mod); + if (err) + return err; + } + } + + return 0; +} + +void module_arch_cleanup(struct module *mod) +{ + module_bug_cleanup(mod); +} diff --git a/target/linux/ubicom32/files/arch/ubicom32/kernel/os_node.c b/target/linux/ubicom32/files/arch/ubicom32/kernel/os_node.c new file mode 100644 index 0000000000..9e014d5cb0 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/kernel/os_node.c @@ -0,0 +1,88 @@ +/* + * arch/ubicom32/kernel/os_node.c + * <TODO: Replace with short file description> + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + */ +#include "linux/types.h" +#include "linux/linkage.h" +#include "linux/uts.h" +#include "linux/utsrelease.h" +#include "linux/version.h" +#include <asm/ocm_size.h> +#include <asm/devtree.h> +#include <asm/ip5000.h> + +extern asmlinkage void *_start; + +/* + * This file provides static information to the boot code allowing it to decide + * if the os is compatible. Thus hopefully enabling the boot code to prevent + * accidentally booting a kernel that has no hope of running. + */ +struct os_node { + struct devtree_node node; + unsigned long version; /* Always 1 */ + unsigned long entry_point; + const char os_name[32]; /* For diagnostic purposes only */ + const char os_version_str[32]; + unsigned long os_version_num; + unsigned long expected_ocm_code_start;/* OS Code */ + unsigned long expected_ocm_data_end; /* OS Data */ + unsigned long expected_ram_start; + unsigned long expected_ram_end; + unsigned long arch_version; + unsigned long expected_os_syscall_begin; + unsigned long expected_os_syscall_end; +}; + + +extern void __os_syscall_begin; +extern void __os_syscall_end; +/* + * The os_node is only referenced by head.S and should never be modified at + * run-time. + */ +asmlinkage const struct os_node _os_node = { + .node = { + .next = NULL, + .name = { "OS" }, + .magic = 0x10203040, + }, + .version = 0x10002, + .entry_point = (unsigned long)&_start, +#if APP_OCM_CODE_SIZE || APP_OCM_DATA_SIZE + .expected_ocm_code_start = OCMSTART + APP_OCM_CODE_SIZE, + .expected_ocm_data_end = OCMEND - APP_OCM_DATA_SIZE, +#else + .expected_ocm_code_start = OCMEND, + .expected_ocm_data_end = OCMEND, +#endif + .os_name = { UTS_SYSNAME }, + .os_version_str = { UTS_RELEASE }, + .os_version_num = LINUX_VERSION_CODE, + .expected_ram_start = KERNELSTART, + .expected_ram_end = SDRAMSTART + CONFIG_MIN_RAMSIZE, + .arch_version = UBICOM32_ARCH_VERSION, + .expected_os_syscall_begin = (unsigned long)&__os_syscall_begin, + .expected_os_syscall_end = (unsigned long)&__os_syscall_end, + + +}; diff --git a/target/linux/ubicom32/files/arch/ubicom32/kernel/process.c b/target/linux/ubicom32/files/arch/ubicom32/kernel/process.c new file mode 100644 index 0000000000..23872fed0f --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/kernel/process.c @@ -0,0 +1,634 @@ +/* + * arch/ubicom32/kernel/process.c + * Ubicom32 architecture-dependent process handling. + * + * (C) Copyright 2009, Ubicom, Inc. + * Copyright (C) 1995 Hamish Macdonald + * + * 68060 fixes by Jesper Skov + * + * uClinux changes + * Copyright (C) 2000-2002, David McCullough <davidm@snapgear.com> + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ + +/* + * This file handles the architecture-dependent parts of process handling.. + */ + +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/smp.h> +#include <linux/smp_lock.h> +#include <linux/stddef.h> +#include <linux/unistd.h> +#include <linux/ptrace.h> +#include <linux/slab.h> +#include <linux/user.h> +#include <linux/a.out.h> +#include <linux/interrupt.h> +#include <linux/reboot.h> +#include <linux/fs.h> +#include <linux/pm.h> + +#include <linux/uaccess.h> +#include <asm/system.h> +#include <asm/traps.h> +#include <asm/machdep.h> +#include <asm/setup.h> +#include <asm/pgtable.h> +#include <asm/ip5000.h> +#include <asm/range-protect.h> + +#define DUMP_RANGE_REGISTER(REG, IDX) asm volatile ( \ + " move.4 %0, "REG"_RANGE"IDX"_EN \n\t" \ + " move.4 %1, "REG"_RANGE"IDX"_LO \n\t" \ + " move.4 %2, "REG"_RANGE"IDX"_HI \n\t" \ + : "=d"(en), "=d"(lo), "=d"(hi) \ + ); \ + printk(KERN_NOTICE REG"Range"IDX": en:%08x, range: %08x-%08x\n", \ + (unsigned int)en, \ + (unsigned int)lo, \ + (unsigned int)hi) + +asmlinkage void ret_from_fork(void); + +void (*pm_power_off)(void) = machine_power_off; +EXPORT_SYMBOL(pm_power_off); + +/* machine-dependent / hardware-specific power functions */ +void (*mach_reset)(void); +void (*mach_halt)(void); +void (*mach_power_off)(void); + +/* + * cpu_idle() + * The idle thread. + * + * Our idle loop suspends and is woken up by a timer interrupt. + */ +void cpu_idle(void) +{ + while (1) { + local_irq_disable(); + while (!need_resched()) { + local_irq_enable(); + thread_suspend(); + local_irq_disable(); + } + local_irq_enable(); + preempt_enable_no_resched(); + schedule(); + preempt_disable(); + } +} + +/* + * dump_fpu() + * + * Fill in the fpu structure for a core dump. (just a stub as we don't have + * an fpu) + */ +int dump_fpu(struct pt_regs *regs, elf_fpregset_t * fpregs) +{ + return 1; +} + +/* + * machine_restart() + * Resets the system. + */ +void machine_restart(char *__unused) +{ + /* + * Disable all threads except myself. We can do this + * directly without needing to call smp_send_stop + * because we have a unique architecture where + * one thread can disable one or more other threads. + */ + thread_disable_others(); + + /* + * Call the hardware-specific machine reset function. + */ + if (mach_reset) { + mach_reset(); + } + + printk(KERN_EMERG "System Restarting\n"); + + /* + * Set watchdog to trigger (after 1ms delay) (12 Mhz is the fixed OSC) + */ + UBICOM32_IO_TIMER->tkey = TIMER_TKEYVAL; + UBICOM32_IO_TIMER->wdcom = UBICOM32_IO_TIMER->mptval + + (12000000 / 1000); + UBICOM32_IO_TIMER->wdcfg = 0; + UBICOM32_IO_TIMER->tkey = 0; + + /* + * Wait for watchdog + */ + asm volatile ( + " move.4 MT_EN, #0 \n\t" + " pipe_flush 0 \n\t" + ); + + local_irq_disable(); + for (;;) { + thread_suspend(); + } +} + +/* + * machine_halt() + * Halt the machine. + * + * Similar to machine_power_off, but don't shut off power. Add code + * here to freeze the system for e.g. post-mortem debug purpose when + * possible. This halt has nothing to do with the idle halt. + */ +void machine_halt(void) +{ + /* + * Disable all threads except myself. We can do this + * directly without needing to call smp_send_stop + * because we have a unique architecture where + * one thread can disable one or more other threads. + */ + thread_disable_others(); + + /* + * Call the hardware-specific machine halt function. + */ + if (mach_halt) { + mach_halt(); + } + + printk(KERN_EMERG "System Halted, OK to turn off power\n"); + local_irq_disable(); + for (;;) { + thread_suspend(); + } +} + +/* + * machine_power_off() + * Turn the power off, if a power off handler is defined, otherwise, spin + * endlessly. + */ +void machine_power_off(void) +{ + /* + * Disable all threads except myself. We can do this + * directly without needing to call smp_send_stop + * because we have a unique architecture where + * one thread can disable one or more other threads. + */ + thread_disable_others(); + + /* + * Call the hardware-specific machine power off function. + */ + if (mach_power_off) { + mach_power_off(); + } + + printk(KERN_EMERG "System Halted, OK to turn off power\n"); + local_irq_disable(); + for (;;) { + thread_suspend(); + } +} + +/* + * address_is_valid() + * check if an address is valid -- (for read access) + */ +static bool address_is_valid(const void *address) +{ + int addr = (int)address; + unsigned long socm, eocm, sdram, edram; + + if (addr & 3) + return false; + + processor_ocm(&socm, &eocm); + processor_dram(&sdram, &edram); + if (addr >= socm && addr < eocm) + return true; + + if (addr >= sdram && addr < edram) + return true; + + return false; +} + +/* + * vma_path_name_is_valid() + * check if path_name of a vma is a valid string + */ +static bool vma_path_name_is_valid(const char *str) +{ +#define MAX_NAME_LEN 256 + int i = 0; + if (!address_is_valid(str)) + return false; + + for (; i < MAX_NAME_LEN; i++, str++) { + if (*str == '\0') + return true; + } + + return false; +} + +/* + * show_vmas() + * show vma info of a process + */ +void show_vmas(struct task_struct *task) +{ +#ifdef CONFIG_DEBUG_VERBOSE +#define UBICOM32_MAX_VMA_COUNT 1024 + + struct vm_area_struct *vma; + struct file *file; + char *name = ""; + int flags, loop = 0; + + printk(KERN_NOTICE "Start of vma list\n"); + + if (!address_is_valid(task) || !address_is_valid(task->mm)) + goto error; + + vma = task->mm->mmap; + while (vma) { + if (!address_is_valid(vma)) + goto error; + + flags = vma->vm_flags; + file = vma->vm_file; + + if (file) { + /* seems better to use dentry op here, but sanity check is easier this way */ + if (!address_is_valid(file) || !address_is_valid(file->f_path.dentry) || !vma_path_name_is_valid(file->f_path.dentry->d_name.name)) + goto error; + + name = (char *)file->f_path.dentry->d_name.name; + } + + /* Similar to /proc/pid/maps format */ + printk(KERN_NOTICE "%08lx-%08lx %c%c%c%c %08lx %s\n", + vma->vm_start, + vma->vm_end, + flags & VM_READ ? 'r' : '-', + flags & VM_WRITE ? 'w' : '-', + flags & VM_EXEC ? 'x' : '-', + flags & VM_MAYSHARE ? flags & VM_SHARED ? 'S' : 's' : 'p', + vma->vm_pgoff << PAGE_SHIFT, + name); + + vma = vma->vm_next; + + if (loop++ > UBICOM32_MAX_VMA_COUNT) + goto error; + } + + printk(KERN_NOTICE "End of vma list\n"); + return; + +error: + printk(KERN_NOTICE "\nCorrupted vma list, abort!\n"); +#endif +} + +/* + * show_regs() + * Print out all of the registers. + */ +void show_regs(struct pt_regs *regs) +{ + unsigned int i; + unsigned int en, lo, hi; + + printk(KERN_NOTICE "regs: %p, tid: %d\n", + (void *)regs, + thread_get_self()); + + printk(KERN_NOTICE "pc: %08x, previous_pc: %08x\n\n", + (unsigned int)regs->pc, + (unsigned int)regs->previous_pc); + + printk(KERN_NOTICE "Data registers\n"); + for (i = 0; i < 16; i++) { + printk("D%02d: %08x, ", i, (unsigned int)regs->dn[i]); + if ((i % 4) == 3) { + printk("\n"); + } + } + printk("\n"); + + printk(KERN_NOTICE "Address registers\n"); + for (i = 0; i < 8; i++) { + printk("A%02d: %08x, ", i, (unsigned int)regs->an[i]); + if ((i % 4) == 3) { + printk("\n"); + } + } + printk("\n"); + + printk(KERN_NOTICE "acc0: %08x-%08x, acc1: %08x-%08x\n", + (unsigned int)regs->acc0[1], + (unsigned int)regs->acc0[0], + (unsigned int)regs->acc1[1], + (unsigned int)regs->acc1[0]); + + printk(KERN_NOTICE "mac_rc16: %08x, source3: %08x\n", + (unsigned int)regs->mac_rc16, + (unsigned int)regs->source3); + + printk(KERN_NOTICE "inst_cnt: %08x, csr: %08x\n", + (unsigned int)regs->inst_cnt, + (unsigned int)regs->csr); + + printk(KERN_NOTICE "int_mask0: %08x, int_mask1: %08x\n", + (unsigned int)regs->int_mask0, + (unsigned int)regs->int_mask1); + + /* + * Dump range registers + */ + DUMP_RANGE_REGISTER("I", "0"); + DUMP_RANGE_REGISTER("I", "1"); + DUMP_RANGE_REGISTER("I", "2"); + DUMP_RANGE_REGISTER("I", "3"); + DUMP_RANGE_REGISTER("D", "0"); + DUMP_RANGE_REGISTER("D", "1"); + DUMP_RANGE_REGISTER("D", "2"); + DUMP_RANGE_REGISTER("D", "3"); + DUMP_RANGE_REGISTER("D", "4"); + + printk(KERN_NOTICE "frame_type: %d, nesting_level: %d, thread_type %d\n\n", + (int)regs->frame_type, + (int)regs->nesting_level, + (int)regs->thread_type); +} + +/* + * kernel_thread_helper() + * On execution d0 will be 0, d1 will be the argument to be passed to the + * kernel function. d2 contains the kernel function that needs to get + * called. d3 will contain address to do_exit which need to get moved + * into a5. On return from fork the child thread d0 will be 0. We call + * this dummy function which in turn loads the argument + */ +asmlinkage void kernel_thread_helper(void); + +/* + * kernel_thread() + * Create a kernel thread + */ +int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags) +{ + struct pt_regs regs; + + memset(®s, 0, sizeof(regs)); + + regs.dn[1] = (unsigned long)arg; + regs.dn[2] = (unsigned long)fn; + regs.dn[3] = (unsigned long)do_exit; + regs.an[5] = (unsigned long)kernel_thread_helper; + regs.pc = (unsigned long)kernel_thread_helper; + regs.nesting_level = 0; + regs.thread_type = KERNEL_THREAD; + + return do_fork(flags | CLONE_VM | CLONE_UNTRACED, + 0, ®s, 0, NULL, NULL); +} +EXPORT_SYMBOL(kernel_thread); + +/* + * flush_thread() + * XXX todo + */ +void flush_thread(void) +{ + /* XXX todo */ +} + +/* + * sys_fork() + * Not implemented on no-mmu. + */ +asmlinkage int sys_fork(struct pt_regs *regs) +{ + /* fork almost works, enough to trick you into looking elsewhere :-( */ + return -EINVAL; +} + +/* + * sys_vfork() + * By the time we get here, the non-volatile registers have also been saved + * on the stack. We do some ugly pointer stuff here.. (see also copy_thread + * which does context copy). + */ +asmlinkage int sys_vfork(struct pt_regs *regs) +{ + unsigned long old_sp = regs->an[7]; + unsigned long old_a5 = regs->an[5]; + unsigned long old_return_address; + long do_fork_return; + + /* + * Read the old retrun address from the stack. + */ + if (copy_from_user(&old_return_address, + (void *)old_sp, sizeof(unsigned long))) { + force_sig(SIGSEGV, current); + return 0; + } + + /* + * Pop the vfork call frame by setting a5 and pc to the old_return + * address and incrementing the stack pointer by 4. + */ + regs->an[5] = old_return_address; + regs->pc = old_return_address; + regs->an[7] += 4; + + do_fork_return = do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, + regs->an[7], regs, 0, NULL, NULL); + + /* + * Now we have to test if the return code is an error. If it is an error + * then restore the frame and we will execute error processing in user + * space. Other wise the child and the parent will return to the correct + * places. + */ + if ((unsigned long)(do_fork_return) >= (unsigned long)(-125)) { + /* + * Error case. We need to restore the frame. + */ + regs->an[5] = old_a5; + regs->pc = old_a5; + regs->an[7] = old_sp; + } + + return do_fork_return; +} + +/* + * sys_clone() + * creates a child thread. + */ +asmlinkage int sys_clone(unsigned long clone_flags, + unsigned long newsp, + struct pt_regs *regs) +{ + if (!newsp) + newsp = regs->an[7]; + return do_fork(clone_flags, newsp, regs, 0, + NULL, NULL); +} + +/* + * copy_thread() + * low level thread copy, only used by do_fork in kernel/fork.c + */ +int copy_thread(unsigned long clone_flags, + unsigned long usp, unsigned long topstk, + struct task_struct *p, struct pt_regs *regs) + +{ + struct pt_regs *childregs; + + childregs = (struct pt_regs *) + (task_stack_page(p) + THREAD_SIZE - 8) - 1; + + *childregs = *regs; + + /* + * Set return value for child to be 0. + */ + childregs->dn[0] = 0; + + if (usp) + childregs->an[7] = usp; + else + childregs->an[7] = (unsigned long)task_stack_page(p) + + THREAD_SIZE - 8; + + /* + * Set up the switch_to frame to return to "ret_from_fork" + */ + p->thread.a5 = (unsigned long)ret_from_fork; + p->thread.sp = (unsigned long)childregs; + + return 0; +} + +/* + * sys_execve() + * executes a new program. + */ +asmlinkage int sys_execve(char *name, char **argv, + char **envp, struct pt_regs *regs) +{ + int error; + char *filename; + + lock_kernel(); + filename = getname(name); + error = PTR_ERR(filename); + if (IS_ERR(filename)) + goto out; + error = do_execve(filename, argv, envp, regs); + putname(filename); + asm (" .global sys_execve_complete\n" + " sys_execve_complete:"); +out: + unlock_kernel(); + return error; +} + +/* + * Return saved PC of a blocked thread. + */ +unsigned long thread_saved_pc(struct task_struct *tsk) +{ + return tsk->thread.a5; +} + + +unsigned long get_wchan(struct task_struct *p) +{ + unsigned long pc; + + /* + * If we don't have a process, or it is not the current + * one or not RUNNING, it makes no sense to ask for a + * wchan. + */ + if (!p || p == current || p->state == TASK_RUNNING) + return 0; + + /* + * TODO: If the process is in the middle of schedule, we + * are supposed to do something different but for now we + * will return the same thing in both situations. + */ + pc = thread_saved_pc(p); + if (in_sched_functions(pc)) + return pc; + return pc; +} + + +/* + * Infrequently used interface to dump task registers to core files. + */ +int dump_task_regs(struct task_struct *task, elf_gregset_t *elfregs) +{ + struct pt_regs *regs = task_pt_regs(task); + *(struct pt_regs *)elfregs = *regs; + + return 1; +} + +/* + * __switch_to is the function that implements the contex save and + * switch within the kernel. Since this is a function call very few + * registers have to be saved to pull this off. d0 holds prev and we + * want to preserve it. prev_switch is a pointer to task->thread + * structure. This is where we will save the register state. next_switch + * is pointer to the next task's thread structure that holds the + * registers. + */ +asmlinkage void *__switch_to(struct task_struct *prev, + struct thread_struct *prev_switch, + struct thread_struct *next_switch) + __attribute__((naked)); diff --git a/target/linux/ubicom32/files/arch/ubicom32/kernel/processor.c b/target/linux/ubicom32/files/arch/ubicom32/kernel/processor.c new file mode 100644 index 0000000000..55d1bdf623 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/kernel/processor.c @@ -0,0 +1,348 @@ +/* + * arch/ubicom32/kernel/processor.c + * Ubicom32 architecture processor info implementation. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/profile.h> +#include <linux/clocksource.h> +#include <linux/types.h> +#include <linux/seq_file.h> +#include <linux/delay.h> +#include <linux/cpu.h> +#include <asm/devtree.h> +#include <asm/processor.h> +#include <asm/cpu.h> +#include <asm/ocm_size.h> + +struct procnode { + struct devtree_node dn; + unsigned int threads; + unsigned int timers; + unsigned int frequency; + unsigned int ddr_frequency; + unsigned int interrupt0; + unsigned int interrupt1; + void *socm; + void *eocm; + void *sdram; + void *edram; + unsigned int arch_version; + void *os_syscall_begin; + void *os_syscall_end; +}; + +struct procnode *pn; + +/* + * show_processorinfo() + * Print the actual processor information. + */ +static void show_processorinfo(struct seq_file *m) +{ + char *cpu, *mmu, *fpu; + unsigned int clockfreq; + unsigned int chipid; + + cpu = CPU; + mmu = "none"; + fpu = "none"; + + asm volatile ( + "move.4 %0, CHIP_ID \n\t" + : "=r" (chipid) + ); + + /* + * General Processor Information. + */ + seq_printf(m, "Vendor:\t\t%s\n", "Ubicom"); + seq_printf(m, "CPU:\t\t%s\n", cpu); + seq_printf(m, "MMU:\t\t%s\n", mmu); + seq_printf(m, "FPU:\t\t%s\n", fpu); + seq_printf(m, "Arch:\t\t%hx\n", chipid >> 16); + seq_printf(m, "Rev:\t\t%hx\n", (chipid & 0xffff)); + + /* + * Now compute the clock frequency in Mhz. + */ + clockfreq = processor_frequency(); + seq_printf(m, "Clock Freq:\t%u.0 MHz\n", + clockfreq / 1000000); + seq_printf(m, "DDR Freq:\t%u.0 MHz\n", + pn ? pn->ddr_frequency / 1000000 : 0); + seq_printf(m, "BogoMips:\t%lu.%02lu\n", + (loops_per_jiffy * HZ) / 500000, + ((loops_per_jiffy * HZ) / 5000) % 100); + seq_printf(m, "Calibration:\t%lu loops\n", (loops_per_jiffy * HZ)); +} + +/* + * show_cpuinfo() + * Get CPU information for use by the procfs. + */ +static int show_cpuinfo(struct seq_file *m, void *v) +{ + unsigned long n = (unsigned long)v - 1; + +#if defined(CONFIG_SMP) + struct cpuinfo_ubicom32 *p = &per_cpu(cpu_data, n); +#endif + + /* + * Print the general processor information on the first + * call. + */ + if (n == 0) { + show_processorinfo(m); + } + +#if defined(CONFIG_SMP) + /* + * For each hwthread, print if this hwthread is running Linux + * or is an I/O thread. + */ + if (cpu_isset(n, cpu_online_map)) { + seq_printf(m, "cpu[%02lu]:\tthread id - %lu\n", n, p->tid); + } else { + seq_printf(m, "cpu[%02lu]:\toff-line\n", n); + } +#endif + return 0; + +} + +static void *c_start(struct seq_file *m, loff_t *pos) +{ + unsigned long i = *pos; + + return i < NR_CPUS ? (void *)(i + 1) : NULL; +} + +static void *c_next(struct seq_file *m, void *v, loff_t *pos) +{ + ++*pos; + return c_start(m, pos); +} + +static void c_stop(struct seq_file *m, void *v) +{ +} + +const struct seq_operations cpuinfo_op = { + .start = c_start, + .next = c_next, + .stop = c_stop, + .show = show_cpuinfo, +}; + +/* + * processor_timers() + * Returns the timers available to Linux. + */ +unsigned int processor_timers(void) +{ + if (!pn) { + return 0; + } + return pn->timers; +} + +/* + * processor_threads() + * Returns the threads available to Linux. + */ +unsigned int processor_threads(void) +{ + if (!pn) { + return 0; + } + return pn->threads; +} + +/* + * processor_frequency() + * Returns the frequency of the system clock. + */ +unsigned int processor_frequency(void) +{ + if (!pn) { + return 0; + } + return pn->frequency; +} +EXPORT_SYMBOL(processor_frequency); + +/* + * processor_interrupts() + * Return the interrupts that are setup at boot time. + */ +int processor_interrupts(unsigned int *int0, unsigned int *int1) +{ + if (!pn) { + return -EFAULT; + } + + if (int0) { + *int0 = pn->interrupt0; + } + + if (int1) { + *int1 = pn->interrupt1; + } + return 0; +} + +/* + * processor_ocm() + * Returns the start and end of OCM available to Linux. + */ +void processor_ocm(unsigned long *socm, unsigned long *eocm) +{ + *socm = (unsigned long)pn->socm; + *eocm = (unsigned long)pn->eocm; +} + +/* + * processor_dram() + * Returns the start and end of dram available to Linux. + */ +void processor_dram(unsigned long *sdram, unsigned long *edram) +{ + *sdram = (unsigned long)pn->sdram; + *edram = (unsigned long)pn->edram; +} + +/* + * processor_validate_failed() + * Returns the dram available to Linux. + */ +static noinline void processor_validate_failed(void) +{ + while (1) + THREAD_STALL; +} + +/* + * processor_validate() + * Validates the procnode against limitations of this link/built. + */ +static void processor_validate(void) +{ + void *dram_start = (void *)(KERNELSTART); + void *dram_end = (void *)(SDRAMSTART + CONFIG_MIN_RAMSIZE); +#if APP_OCM_CODE_SIZE || APP_OCM_DATA_SIZE + void *ocm_code_start = (void *)(OCMSTART + APP_OCM_CODE_SIZE); + void *ocm_data_end = (void *)(OCMEND - APP_OCM_DATA_SIZE); +#endif + extern void __os_syscall_begin; + extern void __os_syscall_end; + int proc_node_valid = 1; + + if (!pn) { + printk(KERN_ERR "ERROR: processor node not found\n"); + goto error; + } + + + if (dram_start < pn->sdram || dram_end > pn->edram) { + printk(KERN_ERR "ERROR: processor dram mismatch %p-%p " + "available but we are expecting %p-%p\n", + pn->sdram, pn->edram, dram_start, dram_end); + proc_node_valid = 0; + } else { + printk(KERN_ERR "processor dram %p-%p, expecting %p-%p\n", + pn->sdram, pn->edram, dram_start, dram_end); + } + if (&__os_syscall_begin < pn->os_syscall_begin || + &__os_syscall_end > pn->os_syscall_end) { + printk(KERN_ERR "ERROR: processor syscall area mismatch " + "%p-%p available but we are expecting %p-%p\n", + pn->os_syscall_begin, pn->os_syscall_end, + &__os_syscall_begin, &__os_syscall_end); + proc_node_valid = 0; + } else { + printk(KERN_ERR "processor dram %p-%p, expecting %p-%p\n", + pn->sdram, pn->edram, dram_start, dram_end); + } +#if APP_OCM_CODE_SIZE || APP_OCM_DATA_SIZE + if (ocm_code_start < pn->socm || ocm_data_end > pn->eocm) { + printk(KERN_ERR "ERROR: processor ocm mismatch %p-%p " + "available but we are expecting %p-%p\n", + pn->socm, pn->eocm, ocm_code_start, ocm_data_end); + proc_node_valid = 0; + } else { + printk(KERN_INFO "processor ocm %p-%p, expecting %p-%p\n", + pn->socm, pn->eocm, ocm_code_start, ocm_data_end); + + } +#endif + + if (UBICOM32_ARCH_VERSION != pn->arch_version) { + printk(KERN_ERR "ERROR: processor arch mismatch, kernel" + "compiled for %d found %d\n", + UBICOM32_ARCH_VERSION, pn->arch_version); + proc_node_valid = 0; + } + + if (proc_node_valid) + return; +error: + processor_validate_failed(); +} + +void __init processor_init(void) +{ + /* + * If we do not have a trap node in the device tree, we leave the fault + * handling to the underlying hardware. + */ + pn = (struct procnode *)devtree_find_node("processor"); + + processor_validate(); + + /* + * If necessary correct the initial range registers to cover the + * complete physical space + */ + if (pn->edram > (void *)(SDRAMSTART + CONFIG_MIN_RAMSIZE)) { + printk(KERN_INFO "updating range registers for expanded dram\n"); + asm volatile ( + " move.4 D_RANGE1_HI, %0 \t\n" + " move.4 I_RANGE0_HI, %0 \t\n" +#ifdef CONFIG_PROTECT_KERNEL + " move.4 D_RANGE2_HI, %0 \t\n" + " move.4 I_RANGE2_HI, %0 \t\n" +#endif + : : "a"((unsigned long)pn->edram - 4) + ); + } + +} diff --git a/target/linux/ubicom32/files/arch/ubicom32/kernel/ptrace.c b/target/linux/ubicom32/files/arch/ubicom32/kernel/ptrace.c new file mode 100644 index 0000000000..18bb39e9d9 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/kernel/ptrace.c @@ -0,0 +1,275 @@ +/* + * arch/ubicom32/kernel/ptrace.c + * Ubicom32 architecture ptrace implementation. + * + * (C) Copyright 2009, Ubicom, Inc. + * (C) 1994 by Hamish Macdonald + * Taken from linux/kernel/ptrace.c and modified for M680x0. + * linux/kernel/ptrace.c is by Ross Biro 1/23/92, edited by Linus Torvalds + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/mm.h> +#include <linux/smp.h> +#include <linux/errno.h> +#include <linux/ptrace.h> +#include <linux/user.h> +#include <linux/signal.h> +#include <linux/uaccess.h> + +#include <asm/page.h> +#include <asm/pgtable.h> +#include <asm/system.h> +#include <asm/cacheflush.h> +#include <asm/processor.h> + +/* + * ptrace_getregs() + * + * Get all user integer registers. + */ +static inline int ptrace_getregs(struct task_struct *task, void __user *uregs) +{ + struct pt_regs *regs = task_pt_regs(task); + return copy_to_user(uregs, regs, sizeof(struct pt_regs)) ? -EFAULT : 0; +} + +/* + * ptrace_get_reg() + * + * Get contents of register REGNO in task TASK. + */ +static unsigned long ptrace_get_reg(struct task_struct *task, int regno) +{ + if (regno < sizeof(struct pt_regs)) { + struct pt_regs *pt_regs = task_pt_regs(task); + return *(unsigned long *)((long) pt_regs + regno); + } + + return -EIO; +} + +/* + * ptrace_put_reg() + * Write contents of register REGNO in task TASK. + */ +static int ptrace_put_reg(struct task_struct *task, int regno, + unsigned long data) +{ + if (regno <= sizeof(struct pt_regs) && regno != PT_FRAME_TYPE) { + struct pt_regs *pt_regs = task_pt_regs(task); + *(unsigned long *)((long) pt_regs + regno) = data; + return 0; + } + return -EIO; +} + +/* + * ptrace_disable_single_step() + * Disable Single Step + */ +static int ptrace_disable_single_step(struct task_struct *task) +{ + /* + * Single Step not yet implemented, so must always be disabled + */ + return 0; +} + +/* + * ptrace_disable() + * Make sure the single step bit is not set. + * Called by kernel/ptrace.c when detaching.. + */ +void ptrace_disable(struct task_struct *child) +{ + ptrace_disable_single_step(child); +} + +/* + * arch_ptrace() + * architecture specific ptrace routine. + */ +long arch_ptrace(struct task_struct *child, long request, long addr, long data) +{ + int ret; + switch (request) { + /* when I and D space are separate, these will need to be fixed. */ + case PTRACE_PEEKTEXT: /* read word at location addr. */ + case PTRACE_PEEKDATA: + ret = generic_ptrace_peekdata(child, addr, data); + break; + + /* read the word at location addr in the USER area. */ + case PTRACE_PEEKUSR: { + unsigned long tmp; + + ret = -EIO; + if (((unsigned long) addr > PT_INTERP_FDPIC_LOADMAP) + || (addr & 3)) + break; + + tmp = 0; /* Default return condition */ + + ret = -EIO; + if (addr < sizeof(struct pt_regs)) { + tmp = ptrace_get_reg(child, addr); + } else if (addr == PT_TEXT_ADDR) { + tmp = child->mm->start_code; + } else if (addr == PT_TEXT_END_ADDR) { + tmp = child->mm->end_code; + } else if (addr == PT_DATA_ADDR) { + tmp = child->mm->start_data; + } else if (addr == PT_EXEC_FDPIC_LOADMAP) { +#ifdef CONFIG_BINFMT_ELF_FDPIC + tmp = child->mm->context.exec_fdpic_loadmap; +#endif + } else if (addr == PT_INTERP_FDPIC_LOADMAP) { +#ifdef CONFIG_BINFMT_ELF_FDPIC + tmp = child->mm->context.interp_fdpic_loadmap; +#endif + } else { + break; + } + + ret = put_user(tmp, (unsigned long *)data); + break; + } + + case PTRACE_POKETEXT: /* write the word at location addr. */ + case PTRACE_POKEDATA: + ret = generic_ptrace_pokedata(child, addr, data); + + /* + * If we just changed some code so we need to + * correct the caches + */ + if (request == PTRACE_POKETEXT && ret == 0) { + flush_icache_range(addr, addr + 4); + } + break; + + case PTRACE_POKEUSR: /* write the word at location addr + * in the USER area */ + ret = -EIO; + + if (((unsigned long) addr > PT_DATA_ADDR) || (addr & 3)) + break; + + if (addr < sizeof(struct pt_regs)) { + ret = ptrace_put_reg(child, addr, data); + } + break; + + case PTRACE_SYSCALL: /* continue and stop at next (return from) + * syscall */ + case PTRACE_CONT: { /* restart after signal. */ + + ret = -EIO; + if (!valid_signal(data)) + break; + if (request == PTRACE_SYSCALL) + set_tsk_thread_flag(child, TIF_SYSCALL_TRACE); + else + clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); + child->exit_code = data; + /* make sure the single step bit is not set. */ + ptrace_disable_single_step(child); + wake_up_process(child); + ret = 0; + break; + } + + /* + * make the child exit. Best I can do is send it a sigkill. + * perhaps it should be put in the status that it wants to exit. + */ + case PTRACE_KILL: { + ret = 0; + if (child->exit_state == EXIT_ZOMBIE) /* already dead */ + break; + child->exit_code = SIGKILL; + /* make sure the single step bit is not set. */ + ptrace_disable_single_step(child); + wake_up_process(child); + break; + } + + case PTRACE_DETACH: /* detach a process that was attached. */ + ret = ptrace_detach(child, data); + break; + + case PTRACE_GETREGS: /* Get all gp regs from the child. */ + ptrace_getregs(child, (unsigned long *)data); + ret = 0; + break; + + case PTRACE_SETREGS: { /* Set all gp regs in the child. */ + int i; + unsigned long tmp; + int count = sizeof(struct pt_regs) / sizeof(unsigned long); + for (i = 0; i < count; i++) { + if (get_user(tmp, (unsigned long *) data)) { + ret = -EFAULT; + break; + } + ptrace_put_reg(child, sizeof(unsigned long) * i, tmp); + data += sizeof(long); + } + ret = 0; + break; + } + + default: + return ptrace_request(child, request, addr, data); + break; + } + return ret; +} +/* + * syscall_trace + * + * called by syscall enter/exit when the TIF_SYSCALL_TRACE bit is set. + */ +asmlinkage void syscall_trace(void) +{ + struct task_struct *cur = current; + if (!test_thread_flag(TIF_SYSCALL_TRACE)) + return; + if (!(cur->ptrace & PT_PTRACED)) + return; + ptrace_notify(SIGTRAP | ((cur->ptrace & PT_TRACESYSGOOD) + ? 0x80 : 0)); + /* + * this isn't the same as continuing with a signal, but it will do + * for normal use. strace only continues with a signal if the + * stopping signal is not SIGTRAP. -brl + */ + if (cur->exit_code) { + send_sig(cur->exit_code, current, 1); + current->exit_code = 0; + } +} diff --git a/target/linux/ubicom32/files/arch/ubicom32/kernel/semaphore.c b/target/linux/ubicom32/files/arch/ubicom32/kernel/semaphore.c new file mode 100644 index 0000000000..d996ac2b30 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/kernel/semaphore.c @@ -0,0 +1,159 @@ +/* + * arch/ubicom32/kernel/semaphore.c + * Ubicom32 architecture semaphore implementation. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +/* + * Generic semaphore code. Buyer beware. Do your own + * specific changes in <asm/semaphore-helper.h> + */ + +#include <linux/sched.h> +#include <linux/err.h> +#include <linux/init.h> +#include <asm/semaphore-helper.h> + +#ifndef CONFIG_RMW_INSNS +spinlock_t semaphore_wake_lock; +#endif + +/* + * Semaphores are implemented using a two-way counter: + * The "count" variable is decremented for each process + * that tries to sleep, while the "waking" variable is + * incremented when the "up()" code goes to wake up waiting + * processes. + * + * Notably, the inline "up()" and "down()" functions can + * efficiently test if they need to do any extra work (up + * needs to do something only if count was negative before + * the increment operation. + * + * waking_non_zero() (from asm/semaphore.h) must execute + * atomically. + * + * When __up() is called, the count was negative before + * incrementing it, and we need to wake up somebody. + * + * This routine adds one to the count of processes that need to + * wake up and exit. ALL waiting processes actually wake up but + * only the one that gets to the "waking" field first will gate + * through and acquire the semaphore. The others will go back + * to sleep. + * + * Note that these functions are only called when there is + * contention on the lock, and as such all this is the + * "non-critical" part of the whole semaphore business. The + * critical part is the inline stuff in <asm/semaphore.h> + * where we want to avoid any extra jumps and calls. + */ +void __up(struct semaphore *sem) +{ + wake_one_more(sem); + wake_up(&sem->wait); +} + +/* + * Perform the "down" function. Return zero for semaphore acquired, + * return negative for signalled out of the function. + * + * If called from __down, the return is ignored and the wait loop is + * not interruptible. This means that a task waiting on a semaphore + * using "down()" cannot be killed until someone does an "up()" on + * the semaphore. + * + * If called from __down_interruptible, the return value gets checked + * upon return. If the return value is negative then the task continues + * with the negative value in the return register (it can be tested by + * the caller). + * + * Either form may be used in conjunction with "up()". + * + */ + + +#define DOWN_HEAD(task_state) \ + \ + \ + current->state = (task_state); \ + add_wait_queue(&sem->wait, &wait); \ + \ + /* \ + * Ok, we're set up. sem->count is known to be less than zero \ + * so we must wait. \ + * \ + * We can let go the lock for purposes of waiting. \ + * We re-acquire it after awaking so as to protect \ + * all semaphore operations. \ + * \ + * If "up()" is called before we call waking_non_zero() then \ + * we will catch it right away. If it is called later then \ + * we will have to go through a wakeup cycle to catch it. \ + * \ + * Multiple waiters contend for the semaphore lock to see \ + * who gets to gate through and who has to wait some more. \ + */ \ + for (;;) { + +#define DOWN_TAIL(task_state) \ + current->state = (task_state); \ + } \ + current->state = TASK_RUNNING; \ + remove_wait_queue(&sem->wait, &wait); + +void __sched __down(struct semaphore *sem) +{ + DECLARE_WAITQUEUE(wait, current); + + DOWN_HEAD(TASK_UNINTERRUPTIBLE) + if (waking_non_zero(sem)) + break; + schedule(); + DOWN_TAIL(TASK_UNINTERRUPTIBLE) +} + +int __sched __down_interruptible(struct semaphore *sem) +{ + DECLARE_WAITQUEUE(wait, current); + int ret = 0; + + DOWN_HEAD(TASK_INTERRUPTIBLE) + + ret = waking_non_zero_interruptible(sem, current); + if (ret) { + if (ret == 1) + /* ret != 0 only if we get interrupted -arca */ + ret = 0; + break; + } + schedule(); + DOWN_TAIL(TASK_INTERRUPTIBLE) + return ret; +} + +int __down_trylock(struct semaphore *sem) +{ + return waking_non_zero_trylock(sem); +} diff --git a/target/linux/ubicom32/files/arch/ubicom32/kernel/setup.c b/target/linux/ubicom32/files/arch/ubicom32/kernel/setup.c new file mode 100644 index 0000000000..7357f4ee35 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/kernel/setup.c @@ -0,0 +1,194 @@ +/* + * arch/ubicom32/kernel/setup.c + * Ubicom32 architecture-dependent parts of system setup. + * + * (C) Copyright 2009, Ubicom, Inc. + * Copyright (C) 1999-2007 Greg Ungerer (gerg@snapgear.com) + * Copyright (C) 1998,1999 D. Jeff Dionne <jeff@uClinux.org> + * Copyleft ()) 2000 James D. Schettine {james@telos-systems.com} + * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com> + * Copyright (C) 1995 Hamish Macdonald + * Copyright (C) 2000 Lineo Inc. (www.lineo.com) + * Copyright (C) 2001 Lineo, Inc. <www.lineo.com> + * 68VZ328 Fixes/support Evan Stawnyczy <e@lineo.ca> + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ + +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/fb.h> +#include <linux/module.h> +#include <linux/console.h> +#include <linux/errno.h> +#include <linux/string.h> +#include <linux/bootmem.h> +#include <linux/seq_file.h> +#include <linux/init.h> + +#include <asm/devtree.h> +#include <asm/setup.h> +#include <asm/irq.h> +#include <asm/machdep.h> +#include <asm/pgtable.h> +#include <asm/pgalloc.h> +#include <asm/ubicom32-common.h> +#include <asm/processor.h> +#include <asm/bootargs.h> +#include <asm/thread.h> + +unsigned long memory_start; +EXPORT_SYMBOL(memory_start); + +unsigned long memory_end; +EXPORT_SYMBOL(memory_end); + +static char __initdata command_line[COMMAND_LINE_SIZE]; +#ifdef CONFIG_CMDLINE_BOOL +static char __initdata builtin_cmdline[COMMAND_LINE_SIZE] = CONFIG_CMDLINE; +#endif + +extern int _stext, _etext, _sdata, _edata, _sbss, _ebss, _end; + +/* + * setup_arch() + * Setup the architecture dependent portions of the system. + */ +void __init setup_arch(char **cmdline_p) +{ + int bootmap_size; + unsigned long ram_start; + + processor_init(); + bootargs_init(); + + /* + * Use the link for memory_start from the link and the processor + * node for memory_end. + */ + memory_start = PAGE_ALIGN(((unsigned long)&_end)); + processor_dram(&ram_start, &memory_end); + + init_mm.start_code = (unsigned long) &_stext; + init_mm.end_code = (unsigned long) &_etext; + init_mm.end_data = (unsigned long) &_edata; + init_mm.brk = (unsigned long) 0; + + /* + * bootexec copies the original default command line to end of memory. + * u-boot can modify it there (i.e. to enable network boot) and the + * kernel picks up the modified version. + * + * mainexec creates a `new default' command_line which is in the + * bootargs devnode. It is updated on every firmware update but + * not used at the moment. + */ + strlcpy(boot_command_line, (char *)(memory_end - COMMAND_LINE_SIZE), COMMAND_LINE_SIZE); + +#ifdef CONFIG_CMDLINE_BOOL +#ifdef CONFIG_CMDLINE_OVERRIDE + strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE); +#else + if (builtin_cmdline[0]) { + /* append boot loader cmdline to builtin */ + strlcat(builtin_cmdline, " ", COMMAND_LINE_SIZE); + strlcat(builtin_cmdline, boot_command_line, COMMAND_LINE_SIZE); + strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE); + } +#endif +#endif + + strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE); + *cmdline_p = command_line; + + parse_early_param(); + + printk(KERN_INFO "%s Processor, Ubicom, Inc. <www.ubicom.com>\n", CPU); + +#if defined(DEBUG) + printk(KERN_DEBUG "KERNEL -> TEXT=0x%06x-0x%06x DATA=0x%06x-0x%06x " + "BSS=0x%06x-0x%06x\n", (int) &_stext, (int) &_etext, + (int) &_sdata, (int) &_edata, + (int) &_sbss, (int) &_ebss); + printk(KERN_DEBUG "MEMORY -> ROMFS=0x%06x-0x%06x MEM=0x%06x-0x%06x\n ", + (int) &_ebss, (int) memory_start, + (int) memory_start, (int) memory_end); +#endif + +#ifdef DEBUG + if (strlen(*cmdline_p)) + printk(KERN_DEBUG "Command line: '%s'\n", *cmdline_p); +#endif + +#if defined(CONFIG_FRAMEBUFFER_CONSOLE) && defined(CONFIG_DUMMY_CONSOLE) + conswitchp = &dummy_con; +#endif + + /* + * If we have a device tree, see if we have the nodes we need. + */ + if (devtree) { + devtree_print(); + } + + /* + * From the arm initialization comment: + * + * This doesn't seem to be used by the Linux memory manager any + * more, but is used by ll_rw_block. If we can get rid of it, we + * also get rid of some of the stuff above as well. + * + * Note: max_low_pfn and max_pfn reflect the number of _pages_ in + * the system, not the maximum PFN. + */ + max_pfn = max_low_pfn = (memory_end - PAGE_OFFSET) >> PAGE_SHIFT; + + /* + * Give all the memory to the bootmap allocator, tell it to put the + * boot mem_map at the start of memory. + */ + bootmap_size = init_bootmem_node( + NODE_DATA(0), + memory_start >> PAGE_SHIFT, /* map goes here */ + PAGE_OFFSET >> PAGE_SHIFT, /* 0 on coldfire */ + memory_end >> PAGE_SHIFT); + /* + * Free the usable memory, we have to make sure we do not free + * the bootmem bitmap so we then reserve it after freeing it :-) + */ + free_bootmem(memory_start, memory_end - memory_start); + reserve_bootmem(memory_start, bootmap_size, BOOTMEM_DEFAULT); + + /* + * Get kmalloc into gear. + */ + paging_init(); + + /* + * Fix up the thread_info structure, indicate this is a mainline Linux + * thread and setup the sw_ksp(). + */ + sw_ksp[thread_get_self()] = (unsigned int) current_thread_info(); + thread_set_mainline(thread_get_self()); +} diff --git a/target/linux/ubicom32/files/arch/ubicom32/kernel/signal.c b/target/linux/ubicom32/files/arch/ubicom32/kernel/signal.c new file mode 100644 index 0000000000..f6ccbe3a75 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/kernel/signal.c @@ -0,0 +1,458 @@ +/* + * arch/ubicom32/kernel/signal.c + * Ubicom32 architecture signal handling implementation. + * + * (C) Copyright 2009, Ubicom, Inc. + * Copyright (C) 1991, 1992 Linus Torvalds + * Linux/m68k support by Hamish Macdonald + * 68060 fixes by Jesper Skov + * 1997-12-01 Modified for POSIX.1b signals by Andreas Schwab + * mathemu support by Roman Zippel + * ++roman (07/09/96): implemented signal stacks + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + * + * mathemu support by Roman Zippel + * (Note: fpstate in the signal context is completely ignored for the emulator + * and the internal floating point format is put on stack) + * + * ++roman (07/09/96): implemented signal stacks (specially for tosemu on + * Atari :-) Current limitation: Only one sigstack can be active at one time. + * If a second signal with SA_ONSTACK set arrives while working on a sigstack, + * SA_ONSTACK is ignored. This behaviour avoids lots of trouble with nested + * signal handlers! + */ + +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/mm.h> +#include <linux/kernel.h> +#include <linux/signal.h> +#include <linux/syscalls.h> +#include <linux/errno.h> +#include <linux/wait.h> +#include <linux/ptrace.h> +#include <linux/unistd.h> +#include <linux/stddef.h> +#include <linux/highuid.h> +#include <linux/tty.h> +#include <linux/personality.h> +#include <linux/binfmts.h> + +#include <asm/setup.h> +#include <asm/uaccess.h> +#include <asm/pgtable.h> +#include <asm/traps.h> +#include <asm/ucontext.h> + +#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) + +/* + * asm signal return handlers. + */ +void ret_from_user_signal(void); +void ret_from_user_rt_signal(void); +asmlinkage int do_signal(sigset_t *oldset, struct pt_regs *regs); + +/* + * Common signal suspend implementation + */ +static int signal_suspend(sigset_t *saveset, struct pt_regs *regs) +{ + regs->dn[0] = -EINTR; + while (1) { + current->state = TASK_INTERRUPTIBLE; + schedule(); + if (!do_signal(saveset, regs)) { + continue; + } + /* + * If the current frame type is a signal trampoline we are + * actually going to call the signal handler so we return the + * desired d0 as the return value. + */ + if (regs->frame_type == UBICOM32_FRAME_TYPE_SIGTRAMP) { + return regs->dn[0]; + } + return -EINTR; + } + /* + * Should never get here + */ + BUG(); + return 0; +} + +/* + * Atomically swap in the new signal mask, and wait for a signal. + */ +asmlinkage int do_sigsuspend(struct pt_regs *regs) +{ + old_sigset_t mask = regs->dn[0]; + sigset_t saveset; + + mask &= _BLOCKABLE; + spin_lock_irq(¤t->sighand->siglock); + saveset = current->blocked; + siginitset(¤t->blocked, mask); + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); + + /* + * Call common handler + */ + return signal_suspend(&saveset, regs); +} + +asmlinkage int +do_rt_sigsuspend(struct pt_regs *regs) +{ + sigset_t *unewset = (sigset_t *)regs->dn[0]; + size_t sigsetsize = (size_t)regs->dn[1]; + sigset_t saveset, newset; + + /* XXX: Don't preclude handling different sized sigset_t's. */ + if (sigsetsize != sizeof(sigset_t)) + return -EINVAL; + + if (copy_from_user(&newset, unewset, sizeof(newset))) + return -EFAULT; + sigdelsetmask(&newset, ~_BLOCKABLE); + + spin_lock_irq(¤t->sighand->siglock); + saveset = current->blocked; + current->blocked = newset; + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); + + /* + * Call common handler + */ + return signal_suspend(&saveset, regs); +} + +asmlinkage int +sys_sigaction(int sig, const struct old_sigaction *act, + struct old_sigaction *oact) +{ + struct k_sigaction new_ka, old_ka; + int ret; + + if (act) { + old_sigset_t mask; + if (!access_ok(VERIFY_READ, act, sizeof(*act)) || + __get_user(new_ka.sa.sa_handler, &act->sa_handler) || + __get_user(new_ka.sa.sa_restorer, &act->sa_restorer)) + return -EFAULT; + __get_user(new_ka.sa.sa_flags, &act->sa_flags); + __get_user(mask, &act->sa_mask); + siginitset(&new_ka.sa.sa_mask, mask); + } + + ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL); + + if (!ret && oact) { + if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) || + __put_user(old_ka.sa.sa_handler, &oact->sa_handler) || + __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer)) + return -EFAULT; + __put_user(old_ka.sa.sa_flags, &oact->sa_flags); + __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask); + } + + return ret; +} + +asmlinkage int +do_sys_sigaltstack(struct pt_regs *regs) +{ + const stack_t *uss = (stack_t *) regs->dn[0]; + stack_t *uoss = (stack_t *)regs->dn[1]; + return do_sigaltstack(uss, uoss, regs->an[7]); +} + +/* + * fdpic_func_descriptor describes sa_handler when the application is FDPIC + */ +struct fdpic_func_descriptor { + unsigned long text; + unsigned long GOT; +}; + +/* + * rt_sigframe is stored on the user stack immediately before (above) + * the signal handlers stack. + */ +struct rt_sigframe +{ + unsigned long syscall_number; /* This holds __NR_rt_sigreturn. */ + unsigned long restore_all_regs; /* This field gets set to 1 if the frame + * type is TRAP or INTERRUPT. */ + siginfo_t *info; + struct ucontext uc; + int sig; + void *pretcode; +}; + +/* + * Do a signal return; undo the signal stack. + */ +asmlinkage int do_sigreturn(unsigned long __unused) +{ + BUG(); + return 0; +} + +asmlinkage int do_rt_sigreturn(struct pt_regs *regs) +{ + unsigned long usp = regs->an[7]; + struct rt_sigframe *frame = (struct rt_sigframe *)(usp); + sigset_t set; + + if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) + goto badframe; + if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set))) + goto badframe; + + sigdelsetmask(&set, ~_BLOCKABLE); + spin_lock_irq(¤t->sighand->siglock); + current->blocked = set; + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); + + if (copy_from_user(regs, &frame->uc.uc_mcontext, sizeof(struct pt_regs))) + goto badframe; + return regs->dn[0]; + +badframe: + force_sig(SIGSEGV, current); + return 0; +} + +static inline void * +get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size) +{ + unsigned long usp; + + /* Default to using normal stack. */ + usp = regs->an[7]; + + /* This is the X/Open sanctioned signal stack switching. */ + if (ka->sa.sa_flags & SA_ONSTACK) { + if (!sas_ss_flags(usp)) + usp = current->sas_ss_sp + current->sas_ss_size; + } + return (void *)((usp - frame_size) & ~0x3); +} + +/* + * signal_trampoline: Defined in ubicom32_syscall.S + */ +asmlinkage void signal_trampoline(void)__attribute__((naked)); + +static void setup_rt_frame (int sig, struct k_sigaction *ka, siginfo_t *info, + sigset_t *set, struct pt_regs *regs) +{ + struct rt_sigframe *frame; + int err = 0; + + frame = (struct rt_sigframe *) get_sigframe(ka, regs, sizeof(*frame)); + + /* + * The 'err |=' have been may criticized as bad code style, but I + * strongly suspect that we want this code to be fast. So for + * now it stays as is. + */ + err |= __put_user( ( (current_thread_info()->exec_domain) + && (current_thread_info()->exec_domain->signal_invmap) + && (sig < 32) ) + ? current_thread_info()->exec_domain->signal_invmap[sig] + : sig, &frame->sig); + err |= __put_user(info, &frame->info); + + /* Create the ucontext. */ + err |= __put_user(0, &frame->uc.uc_flags); + err |= __put_user(0, &frame->uc.uc_link); + err |= __put_user((void *)current->sas_ss_sp, + &frame->uc.uc_stack.ss_sp); + err |= __put_user(sas_ss_flags(regs->an[7]), + &frame->uc.uc_stack.ss_flags); + err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size); + err |= __put_user(__NR_rt_sigreturn, &frame->syscall_number); + if ((regs->frame_type == UBICOM32_FRAME_TYPE_TRAP) || + (regs->frame_type == UBICOM32_FRAME_TYPE_INTERRUPT)) { + err |= __put_user(1, &frame->restore_all_regs); + } else { + err |= __put_user(0, &frame->restore_all_regs); + } + err |= copy_to_user (&frame->uc.uc_mcontext.sc_regs, regs, sizeof(struct pt_regs)); + err |= copy_to_user (&frame->uc.uc_sigmask, set, sizeof(*set)); + + if (err) + goto give_sigsegv; + + /* + * Set up registers for signal handler NOTE: Do not modify dn[14], it + * contains the userspace tls pointer, so it important that it carries + * over to the signal handler. + */ + regs->an[7] = (unsigned long)frame; + regs->pc = (unsigned long) signal_trampoline; + regs->an[5] = (unsigned long) signal_trampoline; + regs->dn[0] = sig; + regs->dn[1] = (unsigned long) frame->info; + regs->dn[2] = (unsigned int) &frame->uc; + + /* + * If this is FDPIC then the signal handler is actually a function + * descriptor. + */ + if (current->personality & FDPIC_FUNCPTRS) { + struct fdpic_func_descriptor __user *funcptr = + (struct fdpic_func_descriptor *) ka->sa.sa_handler; + err |= __get_user(regs->dn[3], &funcptr->text); + err |= __get_user(regs->an[0], &funcptr->GOT); + if (err) + goto give_sigsegv; + + /* + * The funcdesc must be in a3 as this is required for the lazy + * resolver in ld.so, if the application is not FDPIC a3 is not + * used. + */ + regs->an[3] = (unsigned long) funcptr; + + } else { + regs->dn[3] = (unsigned long)ka->sa.sa_handler; + regs->an[0] = 0; + } + + regs->frame_type = UBICOM32_FRAME_TYPE_SIGTRAMP; + + return; + +give_sigsegv: + /* user space exception */ + force_sigsegv(sig, current); +} + +static inline void +handle_restart(struct pt_regs *regs, struct k_sigaction *ka, int has_handler) +{ + switch (regs->dn[0]) { + case -ERESTARTNOHAND: + if (!has_handler) + goto do_restart; + regs->dn[0] = -EINTR; + break; + + case -ERESTARTSYS: + if (has_handler && !(ka->sa.sa_flags & SA_RESTART)) { + regs->dn[0] = -EINTR; + break; + } + /* fallthrough */ + case -ERESTARTNOINTR: + do_restart: + regs->dn[0] = regs->original_dn_0; + regs->pc -= 8; + regs->an[5] -= 8; + break; + } +} + +/* + * OK, we're invoking a handler + */ +static void +handle_signal(int sig, struct k_sigaction *ka, siginfo_t *info, + sigset_t *oldset, struct pt_regs *regs) +{ + /* are we from a system call? */ + if (regs->frame_type == -1) + /* If so, check system call restarting.. */ + handle_restart(regs, ka, 1); + + /* set up the stack frame */ + setup_rt_frame(sig, ka, info, oldset, regs); + + if (ka->sa.sa_flags & SA_ONESHOT) + ka->sa.sa_handler = SIG_DFL; + + spin_lock_irq(¤t->sighand->siglock); + sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); + if (!(ka->sa.sa_flags & SA_NODEFER)) + sigaddset(¤t->blocked,sig); + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); +} + +/* + * Note that 'init' is a special process: it doesn't get signals it doesn't + * want to handle. Thus you cannot kill init even with a SIGKILL even by + * mistake. + */ +asmlinkage int do_signal(sigset_t *oldset, struct pt_regs *regs) +{ + struct k_sigaction ka; + siginfo_t info; + int signr; + + /* + * We want the common case to go fast, which + * is why we may in certain cases get here from + * kernel mode. Just return without doing anything + * if so. + */ + if (!user_mode(regs)) + return 1; + + if (!oldset) + oldset = ¤t->blocked; + + signr = get_signal_to_deliver(&info, &ka, regs, NULL); + if (signr > 0) { + /* Whee! Actually deliver the signal. */ + handle_signal(signr, &ka, &info, oldset, regs); + return 1; + } + + /* Did we come from a system call? */ + if (regs->frame_type == -1) { + /* Restart the system call - no handlers present */ + handle_restart(regs, NULL, 0); + } + + return 0; +} + +/* + * sys_sigreturn() + * Return handler for signal clean-up. + * + * NOTE: Ubicom32 does not use this syscall. Instead we rely + * on do_rt_sigreturn(). + */ +asmlinkage long sys_sigreturn(void) +{ + return -ENOSYS; +} diff --git a/target/linux/ubicom32/files/arch/ubicom32/kernel/smp.c b/target/linux/ubicom32/files/arch/ubicom32/kernel/smp.c new file mode 100644 index 0000000000..4aa27eb444 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/kernel/smp.c @@ -0,0 +1,806 @@ +/* + * arch/ubicom32/kernel/smp.c + * SMP implementation for Ubicom32 processors. + * + * (C) Copyright 2009, Ubicom, Inc. + * Copyright (C) 1999 Walt Drummond <drummond@valinux.com> + * Copyright (C) 1999 David Mosberger-Tang <davidm@hpl.hp.com> + * Copyright (C) 2001,2004 Grant Grundler <grundler@parisc-linux.org> + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ + +#include <linux/types.h> +#include <linux/spinlock.h> +#include <linux/slab.h> + +#include <linux/kernel.h> +#include <linux/bootmem.h> +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/smp.h> +#include <linux/kernel_stat.h> +#include <linux/mm.h> +#include <linux/err.h> +#include <linux/delay.h> +#include <linux/bitops.h> +#include <linux/cpu.h> +#include <linux/profile.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/ptrace.h> +#include <linux/unistd.h> +#include <linux/irq.h> + +#include <asm/system.h> +#include <asm/atomic.h> +#include <asm/current.h> +#include <asm/tlbflush.h> +#include <asm/timex.h> +#include <asm/cpu.h> +#include <asm/irq.h> +#include <asm/processor.h> +#include <asm/thread.h> +#include <asm/sections.h> +#include <asm/ip5000.h> + +/* + * Mask the debug printout for IPI because they are too verbose + * for regular debugging. + */ + +// #define DEBUG_SMP 1 +#if !defined(DEBUG_SMP) +#define smp_debug(lvl, ...) +#else +static unsigned int smp_debug_lvl = 50; +#define smp_debug(lvl, printargs...) \ + if (lvl >= smp_debug_lvl) { \ + printk(printargs); \ + } +#endif + +#if !defined(DEBUG_SMP) +#define DEBUG_ASSERT(cond) +#else +#define DEBUG_ASSERT(cond) \ + if (!(cond)) { \ + THREAD_STALL; \ + } +#endif + +/* + * List of IPI Commands (more than one can be set at a time). + */ +enum ipi_message_type { + IPI_NOP, + IPI_RESCHEDULE, + IPI_CALL_FUNC, + IPI_CALL_FUNC_SINGLE, + IPI_CPU_STOP, + IPI_CPU_TIMER, +}; + +/* + * We maintain a hardware thread oriented view of online threads + * and those involved or needing IPI. + */ +static volatile unsigned long smp_online_threads = 0; +static volatile unsigned long smp_needs_ipi = 0; +static volatile unsigned long smp_inside_ipi = 0; +static unsigned long smp_irq_affinity[NR_IRQS]; + +/* + * What do we need to track on a per cpu/thread basis? + */ +DEFINE_PER_CPU(struct cpuinfo_ubicom32, cpu_data); + +/* + * Each thread cpuinfo IPI information is guarded by a lock + * that is kept local to this file. + */ +DEFINE_PER_CPU(spinlock_t, ipi_lock) = SPIN_LOCK_UNLOCKED; + +/* + * The IPI(s) are based on a software IRQ through the LDSR. + */ +unsigned int smp_ipi_irq; + +/* + * Define a spinlock so that only one cpu is able to modify the + * smp_needs_ipi and to set/clear the IRQ at a time. + */ +DEFINE_SPINLOCK(smp_ipi_lock); + +/* + * smp_halt_processor() + * Halt this hardware thread. + */ +static void smp_halt_processor(void) +{ + int cpuid = thread_get_self(); + cpu_clear(smp_processor_id(), cpu_online_map); + local_irq_disable(); + printk(KERN_EMERG "cpu[%d] has halted. It is not OK to turn off power \ + until all cpu's are off.\n", cpuid); + for (;;) { + thread_suspend(); + } +} + +/* + * ipi_interrupt() + * Handle an Interprocessor Interrupt. + */ +static irqreturn_t ipi_interrupt(int irq, void *dev_id) +{ + int cpuid = smp_processor_id(); + struct cpuinfo_ubicom32 *p = &per_cpu(cpu_data, cpuid); + unsigned long ops; + + /* + * Count this now; we may make a call that never returns. + */ + p->ipi_count++; + + /* + * We are about to process all ops. If another cpu has stated + * that we need an IPI, we will have already processed it. By + * clearing our smp_needs_ipi, and processing all ops, + * we reduce the number of IPI interrupts. However, this introduces + * the possibility that smp_needs_ipi will be clear and the soft irq + * will have gone off; so we need to make the get_affinity() path + * tolerant of spurious interrupts. + */ + spin_lock(&smp_ipi_lock); + smp_needs_ipi &= ~(1 << p->tid); + spin_unlock(&smp_ipi_lock); + + for (;;) { + /* + * Read the set of IPI commands we should handle. + */ + spinlock_t *lock = &per_cpu(ipi_lock, cpuid); + spin_lock(lock); + ops = p->ipi_pending; + p->ipi_pending = 0; + spin_unlock(lock); + + /* + * If we have no IPI commands to execute, break out. + */ + if (!ops) { + break; + } + + /* + * Execute the set of commands in the ops word, one command + * at a time in no particular order. Strip of each command + * as we execute it. + */ + while (ops) { + unsigned long which = ffz(~ops); + ops &= ~(1 << which); + + BUG_ON(!irqs_disabled()); + switch (which) { + case IPI_NOP: + smp_debug(100, KERN_INFO "cpu[%d]: " + "IPI_NOP\n", cpuid); + break; + + case IPI_RESCHEDULE: + /* + * Reschedule callback. Everything to be + * done is done by the interrupt return path. + */ + smp_debug(200, KERN_INFO "cpu[%d]: " + "IPI_RESCHEDULE\n", cpuid); + break; + + case IPI_CALL_FUNC: + smp_debug(100, KERN_INFO "cpu[%d]: " + "IPI_CALL_FUNC\n", cpuid); + generic_smp_call_function_interrupt(); + break; + + case IPI_CALL_FUNC_SINGLE: + smp_debug(100, KERN_INFO "cpu[%d]: " + "IPI_CALL_FUNC_SINGLE\n", cpuid); + generic_smp_call_function_single_interrupt(); + break; + + case IPI_CPU_STOP: + smp_debug(100, KERN_INFO "cpu[%d]: " + "IPI_CPU_STOP\n", cpuid); + smp_halt_processor(); + break; + +#if !defined(CONFIG_LOCAL_TIMERS) + case IPI_CPU_TIMER: + smp_debug(100, KERN_INFO "cpu[%d]: " + "IPI_CPU_TIMER\n", cpuid); +#if defined(CONFIG_GENERIC_CLOCKEVENTS) + local_timer_interrupt(); +#else + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); +#endif +#endif + break; + + default: + printk(KERN_CRIT "cpu[%d]: " + "Unknown IPI: %lu\n", cpuid, which); + + return IRQ_NONE; + } + + /* + * Let in any pending interrupts + */ + BUG_ON(!irqs_disabled()); + local_irq_enable(); + local_irq_disable(); + } + } + return IRQ_HANDLED; +} + +/* + * ipi_send() + * Send an Interprocessor Interrupt. + */ +static void ipi_send(int cpu, enum ipi_message_type op) +{ + struct cpuinfo_ubicom32 *p = &per_cpu(cpu_data, cpu); + spinlock_t *lock = &per_cpu(ipi_lock, cpu); + unsigned long flags; + + /* + * We protect the setting of the ipi_pending field and ensure + * that the ipi delivery mechanism and interrupt are atomically + * handled. + */ + spin_lock_irqsave(lock, flags); + p->ipi_pending |= 1 << op; + spin_unlock_irqrestore(lock, flags); + + spin_lock_irqsave(&smp_ipi_lock, flags); + smp_needs_ipi |= (1 << p->tid); + ubicom32_set_interrupt(smp_ipi_irq); + spin_unlock_irqrestore(&smp_ipi_lock, flags); + smp_debug(100, KERN_INFO "cpu[%d]: send: %d\n", cpu, op); +} + +/* + * ipi_send_mask + * Send an IPI to each cpu in mask. + */ +static inline void ipi_send_mask(unsigned int op, const struct cpumask mask) +{ + int cpu; + for_each_cpu_mask(cpu, mask) { + ipi_send(cpu, op); + } +} + +/* + * ipi_send_allbutself() + * Send an IPI to all threads but ourselves. + */ +static inline void ipi_send_allbutself(unsigned int op) +{ + int self = smp_processor_id(); + struct cpumask result; + cpumask_copy(&result, &cpu_online_map); + cpu_clear(self, result); + ipi_send_mask(op, result); +} + +/* + * smp_enable_vector() + */ +static void smp_enable_vector(unsigned int irq) +{ + ubicom32_clear_interrupt(smp_ipi_irq); + ldsr_enable_vector(irq); +} + +/* + * smp_disable_vector() + * Disable the interrupt by clearing the appropriate bit in the + * LDSR Mask Register. + */ +static void smp_disable_vector(unsigned int irq) +{ + ldsr_disable_vector(irq); +} + +/* + * smp_mask_vector() + */ +static void smp_mask_vector(unsigned int irq) +{ + ldsr_mask_vector(irq); +} + +/* + * smp_unmask_vector() + */ +static void smp_unmask_vector(unsigned int irq) +{ + ldsr_unmask_vector(irq); +} + +/* + * smp_end_vector() + * Called once an interrupt is completed (reset the LDSR mask). + */ +static void smp_end_vector(unsigned int irq) +{ + struct cpuinfo_ubicom32 *p = &per_cpu(cpu_data, smp_processor_id()); + spin_lock(&smp_ipi_lock); + smp_inside_ipi &= ~(1 << p->tid); + if (smp_inside_ipi) { + spin_unlock(&smp_ipi_lock); + return; + } + spin_unlock(&smp_ipi_lock); + ldsr_unmask_vector(irq); + smp_debug(100, KERN_INFO "cpu[%d]: unamesk vector\n", smp_processor_id()); +} + +/* + * Special hanlder functions for SMP. + */ +static struct irq_chip ubicom32_smp_chip = { + .name = "UbicoIPI", + .startup = NULL, + .shutdown = NULL, + .enable = smp_enable_vector, + .disable = smp_disable_vector, + .ack = NULL, + .mask = smp_mask_vector, + .unmask = smp_unmask_vector, + .end = smp_end_vector, +}; + +/* + * smp_reset_ipi() + * None of these cpu(s) got their IPI, turn it back on. + * + * Note: This is called by the LDSR which is not a full + * Linux cpu. Thus you must use the raw form of locks + * because lock debugging will not work on the partial + * cpu nature of the LDSR. + */ +void smp_reset_ipi(unsigned long mask) +{ + __raw_spin_lock(&smp_ipi_lock.raw_lock); + smp_needs_ipi |= mask; + smp_inside_ipi &= ~mask; + ubicom32_set_interrupt(smp_ipi_irq); + __raw_spin_unlock(&smp_ipi_lock.raw_lock); + smp_debug(100, KERN_INFO "smp: reset IPIs for: 0x%x\n", mask); +} + +/* + * smp_get_affinity() + * Choose the thread affinity for this interrupt. + * + * Note: This is called by the LDSR which is not a full + * Linux cpu. Thus you must use the raw form of locks + * because lock debugging will not work on the partial + * cpu nature of the LDSR. + */ +unsigned long smp_get_affinity(unsigned int irq, int *all) +{ + unsigned long mask = 0; + + /* + * Most IRQ(s) are delivered in a round robin fashion. + */ + if (irq != smp_ipi_irq) { + unsigned long result = smp_irq_affinity[irq] & smp_online_threads; + DEBUG_ASSERT(result); + *all = 0; + return result; + } + + /* + * This is an IPI request. Return all cpu(s) scheduled for an IPI. + * We also track those cpu(s) that are going to be "receiving" IPI this + * round. When all CPU(s) have called smp_end_vector(), + * we will unmask the IPI interrupt. + */ + __raw_spin_lock(&smp_ipi_lock.raw_lock); + ubicom32_clear_interrupt(smp_ipi_irq); + if (smp_needs_ipi) { + mask = smp_needs_ipi; + smp_inside_ipi |= smp_needs_ipi; + smp_needs_ipi = 0; + } + __raw_spin_unlock(&smp_ipi_lock.raw_lock); + *all = 1; + return mask; +} + +/* + * smp_set_affinity() + * Set the affinity for this irq but store the value in tid(s). + */ +void smp_set_affinity(unsigned int irq, const struct cpumask *dest) +{ + int cpuid; + unsigned long *paffinity = &smp_irq_affinity[irq]; + + /* + * If none specified, all cpus are allowed. + */ + if (cpus_empty(*dest)) { + *paffinity = 0xffffffff; + return; + } + + /* + * Make sure to clear the old value before setting up the + * list. + */ + *paffinity = 0; + for_each_cpu_mask(cpuid, *dest) { + struct cpuinfo_ubicom32 *p = &per_cpu(cpu_data, cpuid); + *paffinity |= (1 << p->tid); + } +} + +/* + * smp_send_stop() + * Send a stop request to all CPU but this one. + */ +void smp_send_stop(void) +{ + ipi_send_allbutself(IPI_CPU_STOP); +} + +/* + * smp_send_timer_all() + * Send all cpu(s) but this one, a request to update times. + */ +void smp_send_timer_all(void) +{ + ipi_send_allbutself(IPI_CPU_TIMER); +} + +/* + * smp_timer_broadcast() + * Use an IPI to broadcast a timer message + */ +void smp_timer_broadcast(const struct cpumask *mask) +{ + ipi_send_mask(IPI_CPU_TIMER, *mask); +} + +/* + * smp_send_reschedule() + * Send a reschedule request to the specified cpu. + */ +void smp_send_reschedule(int cpu) +{ + ipi_send(cpu, IPI_RESCHEDULE); +} + +/* + * arch_send_call_function_ipi() + * Cause each cpu in the mask to call the generic function handler. + */ +void arch_send_call_function_ipi_mask(const struct cpumask *mask) +{ + int cpu; + for_each_cpu_mask(cpu, *mask) { + ipi_send(cpu, IPI_CALL_FUNC); + } +} + +/* + * arch_send_call_function_single_ipi() + * Cause the specified cpu to call the generic function handler. + */ +void arch_send_call_function_single_ipi(int cpu) +{ + ipi_send(cpu, IPI_CALL_FUNC_SINGLE); +} + +/* + * setup_profiling_timer() + * Dummy function created to keep Oprofile happy in the SMP case. + */ +int setup_profiling_timer(unsigned int multiplier) +{ + return 0; +} + +/* + * smp_mainline_start() + * Start a slave thread executing a mainline Linux context. + */ +static void __init smp_mainline_start(void *arg) +{ + int cpuid = smp_processor_id(); + struct cpuinfo_ubicom32 *p = &per_cpu(cpu_data, cpuid); + + BUG_ON(p->tid != thread_get_self()); + + /* + * Well, support 2.4 linux scheme as well. + */ + if (cpu_test_and_set(cpuid, cpu_online_map)) { + printk(KERN_CRIT "cpu[%d]: already initialized!\n", cpuid); + smp_halt_processor(); + return; + } + + /* + * Initialise the idle task for this CPU + */ + atomic_inc(&init_mm.mm_count); + current->active_mm = &init_mm; + if (current->mm) { + printk(KERN_CRIT "cpu[%d]: idle task already has memory " + "management\n", cpuid); + smp_halt_processor(); + return; + } + + /* + * TODO: X86 does this prior to calling notify, try to understand why? + */ + preempt_disable(); + +#if defined(CONFIG_GENERIC_CLOCKEVENTS) + /* + * Setup a local timer event so that this cpu will get timer interrupts + */ + if (local_timer_setup(cpuid) == -1) { + printk(KERN_CRIT "cpu[%d]: timer alloc failed\n", cpuid); + smp_halt_processor(); + return; + } +#endif + + /* + * Notify those interested that we are up and alive. This must + * be done before interrupts are enabled. It must also be completed + * before the bootstrap cpu returns from __cpu_up() (see comment + * above cpu_set() of the cpu_online_map). + */ + notify_cpu_starting(cpuid); + + /* + * Indicate that this thread is now online and present. Setting + * cpu_online_map has the side effect of allowing the bootstrap + * cpu to continue along; so anything that MUST be done prior to the + * bootstrap cpu returning from __cpu_up() needs to go above here. + */ + cpu_set(cpuid, cpu_online_map); + cpu_set(cpuid, cpu_present_map); + + /* + * Maintain a thread mapping in addition to the cpu mapping. + */ + smp_online_threads |= (1 << p->tid); + + /* + * Enable interrupts for this thread. + */ + local_irq_enable(); + + /* + * Enter the idle loop and wait for a timer to schedule some work. + */ + printk(KERN_INFO "cpu[%d]: entering cpu_idle()\n", cpuid); + cpu_idle(); + + /* Not Reached */ +} + +/* + * smp_cpus_done() + * Called once the kernel_init() has brought up all cpu(s). + */ +void smp_cpus_done(unsigned int cpu_max) +{ + /* Do Nothing */ +} + +/* + * __cpu_up() + * Called to startup a sepcific cpu. + */ +int __cpuinit __cpu_up(unsigned int cpu) +{ + struct task_struct *idle; + unsigned int *stack; + long timeout; + struct cpuinfo_ubicom32 *p = &per_cpu(cpu_data, cpu); + + /* + * Create an idle task for this CPU. + */ + idle = fork_idle(cpu); + if (IS_ERR(idle)) { + panic("cpu[%d]: fork failed\n", cpu); + return -ENOSYS; + } + task_thread_info(idle)->cpu = cpu; + + /* + * Setup the sw_ksp[] to point to this new task. + */ + sw_ksp[p->tid] = (unsigned int)idle->stack; + stack = (unsigned int *)(sw_ksp[p->tid] + PAGE_SIZE - 8); + + /* + * Cause the specified thread to execute our smp_mainline_start + * function as a TYPE_NORMAL thread. + */ + printk(KERN_INFO "cpu[%d]: launching mainline Linux thread\n", cpu); + if (thread_start(p->tid, smp_mainline_start, (void *)NULL, stack, + THREAD_TYPE_NORMAL) == -1) { + printk(KERN_WARNING "cpu[%d]: failed thread_start\n", cpu); + return -ENOSYS; + } + + /* + * Wait for the thread to start up. The thread will set + * the online bit when it is running. Our caller execpts the + * cpu to be online if we return 0. + */ + for (timeout = 0; timeout < 10000; timeout++) { + if (cpu_online(cpu)) { + break; + } + + udelay(100); + barrier(); + continue; + } + + if (!cpu_online(cpu)) { + printk(KERN_CRIT "cpu[%d]: failed to live after %ld us\n", + cpu, timeout * 100); + return -ENOSYS; + } + + printk(KERN_INFO "cpu[%d]: came alive after %ld us\n", + cpu, timeout * 100); + return 0; +} + +/* + * Data used by setup_irq for the IPI. + */ +static struct irqaction ipi_irq = { + .name = "ipi", + .flags = IRQF_DISABLED | IRQF_PERCPU, + .handler = ipi_interrupt, +}; + +/* + * smp_prepare_cpus() + * Mark threads that are available to Linux as possible cpus(s). + */ +void __init smp_prepare_cpus(unsigned int max_cpus) +{ + int i; + + /* + * We will need a software IRQ to send IPI(s). We will use + * a single software IRQ for all IPI(s). + */ + if (irq_soft_alloc(&smp_ipi_irq) < 0) { + panic("no software IRQ is available\n"); + return; + } + + /* + * For the IPI interrupt, we want to use our own chip definition. + * This allows us to define what happens in SMP IPI without affecting + * the performance of the other interrupts. + * + * Next, Register the IPI interrupt function against the soft IRQ. + */ + set_irq_chip(smp_ipi_irq, &ubicom32_smp_chip); + setup_irq(smp_ipi_irq, &ipi_irq); + + /* + * We use the device tree node to determine how many + * free cpus we will have (up to NR_CPUS) and we indicate + * that those cpus are present. + * + * We need to do this very early in the SMP case + * because the Linux init code uses the cpu_present_map. + */ + for_each_possible_cpu(i) { + thread_t tid; + struct cpuinfo_ubicom32 *p = &per_cpu(cpu_data, i); + + /* + * Skip the bootstrap cpu + */ + if (i == 0) { + continue; + } + + /* + * If we have a free thread left in the mask, + * indicate that the cpu is present. + */ + tid = thread_alloc(); + if (tid == (thread_t)-1) { + break; + } + + /* + * Save the hardware thread id for this cpu. + */ + p->tid = tid; + cpu_set(i, cpu_present_map); + printk(KERN_INFO "cpu[%d]: added to cpu_present_map - tid: %d\n", i, tid); + } +} + +/* + * smp_prepare_boot_cpu() + * Copy the per_cpu data into the appropriate spot for the bootstrap cpu. + * + * The code in boot_cpu_init() has already set the boot cpu's + * state in the possible, present, and online maps. + */ +void __devinit smp_prepare_boot_cpu(void) +{ + struct cpuinfo_ubicom32 *p = &per_cpu(cpu_data, 0); + + smp_online_threads |= (1 << p->tid); + printk(KERN_INFO "cpu[%d]: bootstrap CPU online - tid: %ld\n", + current_thread_info()->cpu, p->tid); +} + +/* + * smp_setup_processor_id() + * Set the current_thread_info() structure cpu value. + * + * We set the value to the true hardware thread value that we are running on. + * NOTE: this function overrides the weak alias function in main.c + */ +void __init smp_setup_processor_id(void) +{ + struct cpuinfo_ubicom32 *p = &per_cpu(cpu_data, 0); + int i; + for_each_cpu_mask(i, CPU_MASK_ALL) + set_cpu_possible(i, true); + + current_thread_info()->cpu = 0; + p->tid = thread_get_self(); +} diff --git a/target/linux/ubicom32/files/arch/ubicom32/kernel/stacktrace.c b/target/linux/ubicom32/files/arch/ubicom32/kernel/stacktrace.c new file mode 100644 index 0000000000..2a10e3f4f1 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/kernel/stacktrace.c @@ -0,0 +1,244 @@ +/* + * arch/ubicom32/kernel/stacktrace.c + * Ubicom32 architecture stack back trace implementation. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#include <linux/sched.h> +#include <linux/stacktrace.h> +#include <linux/module.h> +#include <asm/stacktrace.h> +#include <asm/thread.h> +#include <asm/ip5000.h> + +/* + * These symbols are filled in by the linker. + */ +extern unsigned long _stext; +extern unsigned long _etext; + +extern unsigned long __ocm_text_run_begin; +extern unsigned long __data_begin; + +/* + * stacktrace_iterate() + * Walk the stack looking for call and calli instructions on an aligned + * boundary. + * + * Trace must point to the top of the current stack frame. + */ +unsigned long stacktrace_iterate(unsigned long **trace, + unsigned long stext, + unsigned long etext, + unsigned long ocm_stext, + unsigned long ocm_etext, + unsigned long sstack, + unsigned long estack) +{ + unsigned int thread_trap_en, instruction; + unsigned long address; + unsigned int limit = 0; + unsigned long result = 0; + unsigned long *sp = *trace; + + /* + * Exclude the current thread from being monitored for traps. + */ + asm volatile( + " thread_get_self_mask d15 \n\t" + /* save current trap status */ + " and.4 %0, MT_TRAP_EN, d15 \n\t" + " not.4 d15, d15 \n\t" + /* disable trap */ + " and.4 MT_TRAP_EN, MT_TRAP_EN, d15 \n\t" + " pipe_flush 0 \n\t" + : "=r" (thread_trap_en) + : + : "d15", "cc" + ); + + while (limit++ < 256) { + /* + * See if we have a valid stack. + */ + if (!between((unsigned long)sp, sstack, estack)) { +#ifdef TRAP_DEBUG_STACK_TRACE + printk(KERN_EMERG "stack address is out of range - " + "sp: %x, sstack: %x, estack: %x\n", + (unsigned int)sp, (unsigned int)sstack, + (unsigned int)estack); +#endif + result = 0; + *trace = 0; + break; + } + + /* + * Get the value off the stack and back up 4 bytes to what + * should be the address of a call or calli. + */ + address = (*sp++) - 4; + + /* + * If the address is not within the text segment, skip this + * value. + */ + if (!between(address, stext, etext) && + !between(address, ocm_stext, ocm_etext)) { +#ifdef TRAP_DEBUG_STACK_TRACE + printk(KERN_EMERG "not a text address - " + "address: %08x, stext: %08x, etext: %08x\n" + "ocm_stext: %08x, ocm_etext: %08x\n", + (unsigned int)address, + (unsigned int)stext, + (unsigned int)etext, + (unsigned int)ocm_stext, + (unsigned int)ocm_etext); +#endif + continue; + + } + + /* + * If the address is not on an aligned boundary it can not be a + * return address. + */ + if (address & 0x3) { + continue; + } + + /* + * Read the probable instruction. + */ + instruction = *(unsigned int *)address; + + /* + * Is this a call instruction? + */ + if ((instruction & 0xF8000000) == (u32_t)(0x1B << 27)) { +#ifdef TRAP_DEBUG_STACK_TRACE + printk(KERN_EMERG "call inst. result: %x, " + "test: %x\n", (unsigned int)address, + (unsigned int)instruction); +#endif + *trace = sp; + result = address; + break; + } + + /* + * Is this a calli instruction? + */ + if ((instruction & 0xF8000000) == (u32_t)(0x1E << 27)) { +#ifdef TRAP_DEBUG_STACK_TRACE + printk(KERN_EMERG "calli inst. result: %x, " + "test: %x\n", (unsigned int)address, + (unsigned int)instruction); +#endif + *trace = sp; + result = address; + break; + } + } + + /* + * Restore the current thread to be monitored for traps. + */ + if (thread_trap_en) { + asm volatile( + " thread_get_self_mask d15 \n\t" + " or.4 MT_TRAP_EN, MT_TRAP_EN, d15 \n\t" + : + : + : "d15", "cc" + ); + } + return result; +} + +#ifdef CONFIG_STACKTRACE +/* + * stacktrace_save_entries() + * Save stack back trace information into the provided trace structure. + */ +void stacktrace_save_entries(struct task_struct *tsk, + struct stack_trace *trace, + unsigned long sp) +{ + unsigned long code_start = (unsigned long)&_stext; + unsigned long code_end = (unsigned long)&_etext; + unsigned long ocm_code_start = (unsigned long)&__ocm_text_run_begin; + unsigned long ocm_code_end = (unsigned long)&__data_begin; + unsigned long stack_end = (unsigned long)(tsk->stack + THREAD_SIZE - 8); + unsigned long stack = (unsigned long)sp; + unsigned int idx = 0; + unsigned long *handle; + int skip = trace->skip; + + handle = (unsigned long *)stack; + while (idx < trace->max_entries) { + if (skip) { + skip--; + continue; + } + trace->entries[idx] = stacktrace_iterate(&handle, + code_start, code_end, + ocm_code_start, ocm_code_end, + (unsigned long)stack, stack_end); + if (trace->entries[idx] == 0) { + break; + } + idx++; + } +} + +/* + * save_stack_trace() + * Save the specified amount of the kernel stack trace information + * for the current task. + */ +void save_stack_trace(struct stack_trace *trace) +{ + unsigned long sp = 0; + asm volatile ( + " move.4 %0, SP \n\t" + : "=r" (sp) + ); + stacktrace_save_entries(current, trace, sp); +} +EXPORT_SYMBOL_GPL(save_stack_trace); + +/* + * save_stack_trace_tsk() + * Save the specified amount of the kernel stack trace information + * for the specified task. + * + * Note: We assume the specified task is not currently running. + */ +void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace) +{ + stacktrace_save_entries(tsk, trace, tsk->thread.sp); +} +EXPORT_SYMBOL_GPL(save_stack_trace_tsk); +#endif /* CONFIG_STACKTRACE */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/kernel/sys_ubicom32.c b/target/linux/ubicom32/files/arch/ubicom32/kernel/sys_ubicom32.c new file mode 100644 index 0000000000..b06f3f3965 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/kernel/sys_ubicom32.c @@ -0,0 +1,237 @@ +/* + * arch/ubicom32/kernel/sys_ubicom32.c + * Ubicom32 architecture system call support implementation. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + * + * This file contains various random system calls that + * have a non-standard calling sequence on the Linux/ubicom32 + * platform. + */ + +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/mm.h> +#include <linux/smp.h> +#include <linux/sem.h> +#include <linux/msg.h> +#include <linux/shm.h> +#include <linux/stat.h> +#include <linux/syscalls.h> +#include <linux/mman.h> +#include <linux/file.h> +#include <linux/utsname.h> +#include <linux/ipc.h> +#include <linux/fs.h> +#include <linux/uaccess.h> +#include <linux/unistd.h> + +#include <asm/setup.h> +#include <asm/traps.h> +#include <asm/cacheflush.h> + +/* common code for old and new mmaps */ +static inline long do_mmap2( + unsigned long addr, unsigned long len, + unsigned long prot, unsigned long flags, + unsigned long fd, unsigned long pgoff) +{ + int error = -EBADF; + struct file *file = NULL; + + flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); + if (!(flags & MAP_ANONYMOUS)) { + file = fget(fd); + if (!file) + goto out; + } + + down_write(¤t->mm->mmap_sem); + error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); + up_write(¤t->mm->mmap_sem); + + if (file) + fput(file); +out: + return error; +} + +asmlinkage long sys_mmap2(unsigned long addr, unsigned long len, + unsigned long prot, unsigned long flags, + unsigned long fd, unsigned long pgoff) +{ + return do_mmap2(addr, len, prot, flags, fd, pgoff); +} + +/* + * Perform the select(nd, in, out, ex, tv) and mmap() system + * calls. Linux/m68k cloned Linux/i386, which didn't use to be able to + * handle more than 4 system call parameters, so these system calls + * used a memory block for parameter passing.. + */ + +struct mmap_arg_struct { + unsigned long addr; + unsigned long len; + unsigned long prot; + unsigned long flags; + unsigned long fd; + unsigned long offset; +}; + +asmlinkage int old_mmap(struct mmap_arg_struct *arg) +{ + struct mmap_arg_struct a; + int error = -EFAULT; + + if (copy_from_user(&a, arg, sizeof(a))) + goto out; + + error = -EINVAL; + if (a.offset & ~PAGE_MASK) + goto out; + + a.flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); + + error = do_mmap2(a.addr, a.len, a.prot, a.flags, a.fd, + a.offset >> PAGE_SHIFT); +out: + return error; +} + +struct sel_arg_struct { + unsigned long n; + fd_set *inp, *outp, *exp; + struct timeval *tvp; +}; + +asmlinkage int old_select(struct sel_arg_struct *arg) +{ + struct sel_arg_struct a; + + if (copy_from_user(&a, arg, sizeof(a))) + return -EFAULT; + /* sys_select() does the appropriate kernel locking */ + return sys_select(a.n, a.inp, a.outp, a.exp, a.tvp); +} + +/* + * sys_ipc() is the de-multiplexer for the SysV IPC calls.. + * + * This is really horribly ugly. + */ +asmlinkage int sys_ipc(uint call, int first, int second, + int third, void *ptr, long fifth) +{ + int version, ret; + + version = call >> 16; /* hack for backward compatibility */ + call &= 0xffff; + + if (call <= SEMCTL) + switch (call) { + case SEMOP: + return sys_semop(first, (struct sembuf *)ptr, second); + case SEMGET: + return sys_semget(first, second, third); + case SEMCTL: { + union semun fourth; + if (!ptr) + return -EINVAL; + if (get_user(fourth.__pad, (void **) ptr)) + return -EFAULT; + return sys_semctl(first, second, third, fourth); + } + default: + return -EINVAL; + } + if (call <= MSGCTL) + switch (call) { + case MSGSND: + return sys_msgsnd(first, (struct msgbuf *) ptr, + second, third); + case MSGRCV: + switch (version) { + case 0: { + struct ipc_kludge tmp; + if (!ptr) + return -EINVAL; + if (copy_from_user(&tmp, + (struct ipc_kludge *)ptr, + sizeof(tmp))) + return -EFAULT; + return sys_msgrcv(first, tmp.msgp, second, + tmp.msgtyp, third); + } + default: + return sys_msgrcv(first, + (struct msgbuf *) ptr, + second, fifth, third); + } + case MSGGET: + return sys_msgget((key_t) first, second); + case MSGCTL: + return sys_msgctl(first, second, + (struct msqid_ds *) ptr); + default: + return -EINVAL; + } + if (call <= SHMCTL) + switch (call) { + case SHMAT: + switch (version) { + default: { + ulong raddr; + ret = do_shmat(first, ptr, second, &raddr); + if (ret) + return ret; + return put_user(raddr, (ulong __user *) third); + } + } + case SHMDT: + return sys_shmdt(ptr); + case SHMGET: + return sys_shmget(first, second, third); + case SHMCTL: + return sys_shmctl(first, second, ptr); + default: + return -ENOSYS; + } + + return -EINVAL; +} + +/* sys_cacheflush -- flush (part of) the processor cache. */ +asmlinkage int +sys_cacheflush(unsigned long addr, int scope, int cache, unsigned long len) +{ + flush_cache_all(); + return 0; +} + +asmlinkage int sys_getpagesize(void) +{ + return PAGE_SIZE; +} diff --git a/target/linux/ubicom32/files/arch/ubicom32/kernel/syscalltable.S b/target/linux/ubicom32/files/arch/ubicom32/kernel/syscalltable.S new file mode 100644 index 0000000000..8921fb83da --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/kernel/syscalltable.S @@ -0,0 +1,376 @@ +/* + * arch/ubicom32/kernel/syscalltable.S + * <TODO: Replace with short file description> + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +/* + * + * Copyright (C) 2002, Greg Ungerer (gerg@snapgear.com) + * Copyright (C) 1998 D. Jeff Dionne <jeff@lineo.ca>, Kenneth Albanowski <kjahds@kjahds.com>, + * Copyright (C) 2000 Lineo Inc. (www.lineo.com) + * Copyright (C) 1991, 1992 Linus Torvalds + */ + +#include <linux/sys.h> +#include <linux/linkage.h> +#include <asm/unistd.h> + +.text +ALIGN + .global sys_call_table +sys_call_table: + .long sys_ni_syscall /* 0 - old "setup()" system call*/ + .long sys_exit + .long sys_fork + .long sys_read + .long sys_write + .long sys_open /* 5 */ + .long sys_close + .long sys_waitpid + .long sys_creat + .long sys_link + .long sys_unlink /* 10 */ + .long execve_intercept + .long sys_chdir + .long sys_time + .long sys_mknod + .long sys_chmod /* 15 */ + .long sys_chown16 + .long sys_ni_syscall /* old break syscall holder */ + .long sys_stat + .long sys_lseek + .long sys_getpid /* 20 */ + .long sys_mount + .long sys_oldumount + .long sys_setuid16 + .long sys_getuid16 + .long sys_stime /* 25 */ + .long sys_ptrace + .long sys_alarm + .long sys_fstat + .long sys_pause + .long sys_utime /* 30 */ + .long sys_ni_syscall /* old stty syscall holder */ + .long sys_ni_syscall /* old gtty syscall holder */ + .long sys_access + .long sys_nice + .long sys_ni_syscall /* 35 */ /* old ftime syscall holder */ + .long sys_sync + .long sys_kill + .long sys_rename + .long sys_mkdir + .long sys_rmdir /* 40 */ + .long sys_dup + .long sys_pipe + .long sys_times + .long sys_ni_syscall /* old prof syscall holder */ + .long sys_brk /* 45 */ + .long sys_setgid16 + .long sys_getgid16 + .long sys_signal + .long sys_geteuid16 + .long sys_getegid16 /* 50 */ + .long sys_acct + .long sys_umount /* recycled never used phys() */ + .long sys_ni_syscall /* old lock syscall holder */ + .long sys_ioctl + .long sys_fcntl /* 55 */ + .long sys_ni_syscall /* old mpx syscall holder */ + .long sys_setpgid + .long sys_ni_syscall /* old ulimit syscall holder */ + .long sys_ni_syscall + .long sys_umask /* 60 */ + .long sys_chroot + .long sys_ustat + .long sys_dup2 + .long sys_getppid + .long sys_getpgrp /* 65 */ + .long sys_setsid + .long sys_sigaction + .long sys_sgetmask + .long sys_ssetmask + .long sys_setreuid16 /* 70 */ + .long sys_setregid16 + .long sys_sigsuspend + .long sys_sigpending + .long sys_sethostname + .long sys_setrlimit /* 75 */ + .long sys_old_getrlimit + .long sys_getrusage + .long sys_gettimeofday + .long sys_settimeofday + .long sys_getgroups16 /* 80 */ + .long sys_setgroups16 + .long old_select + .long sys_symlink + .long sys_lstat + .long sys_readlink /* 85 */ + .long sys_uselib + .long sys_ni_syscall /* _sys_swapon */ + .long sys_reboot + .long sys_old_readdir + .long old_mmap /* 90 */ + .long sys_munmap + .long sys_truncate + .long sys_ftruncate + .long sys_fchmod + .long sys_fchown16 /* 95 */ + .long sys_getpriority + .long sys_setpriority + .long sys_ni_syscall /* old profil syscall holder */ + .long sys_statfs + .long sys_fstatfs /* 100 */ + .long sys_ni_syscall /* ioperm for i386 */ + .long sys_socketcall + .long sys_syslog + .long sys_setitimer + .long sys_getitimer /* 105 */ + .long sys_newstat + .long sys_newlstat + .long sys_newfstat + .long sys_ni_syscall + .long sys_ni_syscall /* iopl for i386 */ /* 110 */ + .long sys_vhangup + .long sys_ni_syscall /* obsolete idle() syscall */ + .long sys_ni_syscall /* vm86old for i386 */ + .long sys_wait4 + .long sys_ni_syscall /* 115 */ /* _sys_swapoff */ + .long sys_sysinfo + .long sys_ipc + .long sys_fsync + .long sys_sigreturn + .long clone_intercept /* 120 */ + .long sys_setdomainname + .long sys_newuname + .long sys_cacheflush /* modify_ldt for i386 */ + .long sys_adjtimex + .long sys_ni_syscall /* 125 */ /* _sys_mprotect */ + .long sys_sigprocmask + .long sys_ni_syscall /* old "creat_module" */ + .long sys_init_module + .long sys_delete_module + .long sys_ni_syscall /* 130: old "get_kernel_syms" */ + .long sys_quotactl + .long sys_getpgid + .long sys_fchdir + .long sys_bdflush + .long sys_sysfs /* 135 */ + .long sys_personality + .long sys_ni_syscall /* for afs_syscall */ + .long sys_setfsuid16 + .long sys_setfsgid16 + .long sys_llseek /* 140 */ + .long sys_getdents + .long sys_select + .long sys_flock + .long sys_ni_syscall /* _sys_msync */ + .long sys_readv /* 145 */ + .long sys_writev + .long sys_getsid + .long sys_fdatasync + .long sys_sysctl + .long sys_ni_syscall /* 150 */ /* _sys_mlock */ + .long sys_ni_syscall /* _sys_munlock */ + .long sys_ni_syscall /* _sys_mlockall */ + .long sys_ni_syscall /* _sys_munlockall */ + .long sys_sched_setparam + .long sys_sched_getparam /* 155 */ + .long sys_sched_setscheduler + .long sys_sched_getscheduler + .long sys_sched_yield + .long sys_sched_get_priority_max + .long sys_sched_get_priority_min /* 160 */ + .long sys_sched_rr_get_interval + .long sys_nanosleep + .long sys_ni_syscall /* _sys_mremap */ + .long sys_setresuid16 + .long sys_getresuid16 /* 165 */ + .long sys_getpagesize /* _sys_getpagesize */ + .long sys_ni_syscall /* old "query_module" */ + .long sys_poll + .long sys_ni_syscall /* _sys_nfsservctl */ + .long sys_setresgid16 /* 170 */ + .long sys_getresgid16 + .long sys_prctl + .long sys_rt_sigreturn + .long sys_rt_sigaction + .long sys_rt_sigprocmask /* 175 */ + .long sys_rt_sigpending + .long sys_rt_sigtimedwait + .long sys_rt_sigqueueinfo + .long sys_rt_sigsuspend + .long sys_pread64 /* 180 */ + .long sys_pwrite64 + .long sys_lchown16 + .long sys_getcwd + .long sys_capget + .long sys_capset /* 185 */ + .long sys_sigaltstack + .long sys_sendfile + .long sys_ni_syscall /* streams1 */ + .long sys_ni_syscall /* streams2 */ + .long vfork_intercept /* 190 */ + .long sys_getrlimit + .long sys_mmap2 + .long sys_truncate64 + .long sys_ftruncate64 + .long sys_stat64 /* 195 */ + .long sys_lstat64 + .long sys_fstat64 + .long sys_chown + .long sys_getuid + .long sys_getgid /* 200 */ + .long sys_geteuid + .long sys_getegid + .long sys_setreuid + .long sys_setregid + .long sys_getgroups /* 205 */ + .long sys_setgroups + .long sys_fchown + .long sys_setresuid + .long sys_getresuid + .long sys_setresgid /* 210 */ + .long sys_getresgid + .long sys_lchown + .long sys_setuid + .long sys_setgid + .long sys_setfsuid /* 215 */ + .long sys_setfsgid + .long sys_pivot_root + .long sys_ni_syscall + .long sys_ni_syscall + .long sys_getdents64 /* 220 */ + .long sys_gettid + .long sys_tkill + .long sys_setxattr + .long sys_lsetxattr + .long sys_fsetxattr /* 225 */ + .long sys_getxattr + .long sys_lgetxattr + .long sys_fgetxattr + .long sys_listxattr + .long sys_llistxattr /* 230 */ + .long sys_flistxattr + .long sys_removexattr + .long sys_lremovexattr + .long sys_fremovexattr + .long sys_futex /* 235 */ + .long sys_sendfile64 + .long sys_ni_syscall /* _sys_mincore */ + .long sys_ni_syscall /* _sys_madvise */ + .long sys_fcntl64 + .long sys_readahead /* 240 */ + .long sys_io_setup + .long sys_io_destroy + .long sys_io_getevents + .long sys_io_submit + .long sys_io_cancel /* 245 */ + .long sys_fadvise64 + .long sys_exit_group + .long sys_lookup_dcookie + .long sys_epoll_create + .long sys_epoll_ctl /* 250 */ + .long sys_epoll_wait + .long sys_ni_syscall /* _sys_remap_file_pages */ + .long sys_set_tid_address + .long sys_timer_create + .long sys_timer_settime /* 255 */ + .long sys_timer_gettime + .long sys_timer_getoverrun + .long sys_timer_delete + .long sys_clock_settime + .long sys_clock_gettime /* 260 */ + .long sys_clock_getres + .long sys_clock_nanosleep + .long sys_statfs64 + .long sys_fstatfs64 + .long sys_tgkill /* 265 */ + .long sys_utimes + .long sys_fadvise64_64 + .long sys_mbind + .long sys_get_mempolicy + .long sys_set_mempolicy /* 270 */ + .long sys_mq_open + .long sys_mq_unlink + .long sys_mq_timedsend + .long sys_mq_timedreceive + .long sys_mq_notify /* 275 */ + .long sys_mq_getsetattr + .long sys_waitid + .long sys_ni_syscall /* for _sys_vserver */ + .long sys_add_key + .long sys_request_key /* 280 */ + .long sys_keyctl + .long sys_ioprio_set + .long sys_ioprio_get + .long sys_inotify_init + .long sys_inotify_add_watch /* 285 */ + .long sys_inotify_rm_watch + .long sys_migrate_pages + .long sys_openat + .long sys_mkdirat + .long sys_mknodat /* 290 */ + .long sys_fchownat + .long sys_futimesat + .long sys_fstatat64 + .long sys_unlinkat + .long sys_renameat /* 295 */ + .long sys_linkat + .long sys_symlinkat + .long sys_readlinkat + .long sys_fchmodat + .long sys_faccessat /* 300 */ + .long sys_ni_syscall /* Reserved for pselect6 */ + .long sys_ni_syscall /* Reserved for ppoll */ + .long sys_unshare + .long sys_set_robust_list + .long sys_get_robust_list /* 305 */ + .long sys_splice + .long sys_sync_file_range + .long sys_tee + .long sys_vmsplice + .long sys_move_pages /* 310 */ + .long sys_sched_setaffinity + .long sys_sched_getaffinity + .long sys_kexec_load + .long sys_getcpu + .long sys_epoll_pwait /* 315 */ + .long sys_utimensat + .long sys_signalfd + .long sys_timerfd_create + .long sys_eventfd + .long sys_fallocate /* 320 */ + .long sys_timerfd_settime + .long sys_timerfd_gettime + .long sys_ni_syscall /* sys_signalfd4 */ + .long sys_ni_syscall /* sys_eventfd2 */ + .long sys_ni_syscall /* sys_epoll_create1 */ + /* 325 */ + .long sys_ni_syscall /* sys_dup3 */ + .long sys_ni_syscall /* sys_pipe2 */ + .long sys_ni_syscall /* sys_inotify_init1 */ + .rept NR_syscalls-(.-sys_call_table)/4 + .long sys_ni_syscall + .endr diff --git a/target/linux/ubicom32/files/arch/ubicom32/kernel/thread.c b/target/linux/ubicom32/files/arch/ubicom32/kernel/thread.c new file mode 100644 index 0000000000..aaa5fbea4e --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/kernel/thread.c @@ -0,0 +1,228 @@ +/* + * arch/ubicom32/kernel/thread.c + * Ubicom32 architecture hardware thread support. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/profile.h> +#include <linux/clocksource.h> +#include <linux/types.h> +#include <asm/ip5000.h> +#include <asm/machdep.h> +#include <asm/asm-offsets.h> +#include <asm/thread.h> + +/* + * TODO: At some point change the name here to be thread_ksp + */ +unsigned int sw_ksp[THREAD_ARCHITECTURAL_MAX]; + +static unsigned int thread_mask = -1; +static unsigned int thread_mainline_mask; + +/* + * thread_entry() + * Returning from the called function will disable the thread. + * + * This could be a naked call to allow for hwthreads that do not have stacks. + * However, with -O0, the code still writes to thex stack, and this was + * corrupting memory just after the callers stack. + */ +static void thread_entry(void *arg, thread_exec_fn_t exec) +{ + /* + * Call thread function + */ + exec(arg); + + /* + * Complete => Disable self + */ + thread_disable(thread_get_self()); +} + +/* + * thread_start() + * Start the specified function on the specified hardware thread. + */ +thread_t thread_start(thread_t thread, + thread_exec_fn_t exec, + void *arg, + unsigned int *sp_high, + thread_type_t type) +{ + /* + * Sanity check + */ + unsigned int enabled, mask, csr; + asm volatile ( + "move.4 %0, MT_EN\n\t" + : "=m" (enabled) + ); + + mask = 1 << thread; + if (enabled & mask) { + printk(KERN_WARNING "request to enable a previously enabled thread\n"); + return (thread_t)-1; + } + + /* + * Update thread state + */ + csr = (thread << 15) | (1 << 14); + asm volatile ( + "setcsr %0 \n\t" + "setcsr_flush 0 \n\t" + + "move.4 A0, #0 \n\t" + "move.4 A1, #0 \n\t" + "move.4 A2, #0 \n\t" + "move.4 A3, #0 \n\t" + "move.4 A4, #0 \n\t" + "move.4 A5, #0 \n\t" + "move.4 A6, #0 \n\t" + "move.4 SP, %4 \n\t" /* A7 is SP */ + + "move.4 D0, %3 \n\t" + "move.4 D1, %2 \n\t" + "move.4 D2, #0 \n\t" + "move.4 D3, #0 \n\t" + "move.4 D4, #0 \n\t" + "move.4 D5, #0 \n\t" + "move.4 D6, #0 \n\t" + "move.4 D7, #0 \n\t" + "move.4 D8, #0 \n\t" + "move.4 D9, #0 \n\t" + "move.4 D10, #0 \n\t" + "move.4 D11, #0 \n\t" + "move.4 D12, #0 \n\t" + "move.4 D13, #0 \n\t" + "move.4 D14, #0 \n\t" + "move.4 D15, #0 \n\t" + + "move.4 INT_MASK0, #0 \n\t" + "move.4 INT_MASK1, #0 \n\t" + "move.4 PC, %1 \n\t" + "setcsr #0 \n\t" + "setcsr_flush 0 \n\t" + : + : "r" (csr), "r" (thread_entry), "r" (exec), + "r" (arg), "r" (sp_high) + ); + + /* + * Apply HRT state + */ + if (type & THREAD_TYPE_HRT) { + asm volatile ( + "or.4 MT_HRT, MT_HRT, %0\n\t" + : + : "d" (mask) + : "cc" + ); + } else { + asm volatile ( + "and.4 MT_HRT, MT_HRT, %0\n\t" + : + : "d" (~mask) + : "cc" + ); + } + + /* + * Set priority + */ + asm volatile ( + "or.4 MT_HPRI, MT_HPRI, %0\n\t" + : + : "d" (mask) + : "cc" + ); + + /* + * Enable thread + */ + asm volatile ( + "move.4 MT_ACTIVE_SET, %0 \n\t" + : + : "d" (mask) + ); + thread_enable_mask(mask); + return thread; +} + +/* + * thread_get_mainline() + * Return a mask of those threads that are Linux mainline threads. + */ +unsigned int thread_get_mainline(void) +{ + return thread_mainline_mask; +} + +/* + * thread_set_mainline() + * Indicate that the specified thread is a Linux mainline thread. + */ +void thread_set_mainline(thread_t tid) +{ + thread_mainline_mask |= (1 << tid); +} + +/* + * thread_alloc() + * Allocate an unused hardware thread. + */ +thread_t thread_alloc(void) +{ + thread_t tid; + + /* + * If this is the first time we are here get the list of unused + * threads from the processor device tree node. + */ + if (thread_mask == -1) { + thread_mask = processor_threads(); + } + + if (!thread_mask) { + return (thread_t)-1; + } + + tid = ffs(thread_mask); + if (tid != 0) { + tid--; + thread_mask &= ~(1 << tid); + return tid; + } + + return (thread_t)-1; +} diff --git a/target/linux/ubicom32/files/arch/ubicom32/kernel/time.c b/target/linux/ubicom32/files/arch/ubicom32/kernel/time.c new file mode 100644 index 0000000000..4a99284bd0 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/kernel/time.c @@ -0,0 +1,212 @@ +/* + * arch/ubicom32/kernel/time.c + * Initialize the timer list and start the appropriate timers. + * + * (C) Copyright 2009, Ubicom, Inc. + * Copyright (C) 1991, 1992, 1995 Linus Torvalds + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ + +#include <linux/profile.h> +#include <linux/smp.h> +#include <asm/ip5000.h> +#include <asm/machdep.h> + +/* + * A bitmap of the timers on the processor indicates + * that the timer is free or in-use. + */ +static unsigned int timers; + +/* + * timer_set() + * Init the specified compare register to go off <n> cycles from now. + */ +void timer_set(int timervector, unsigned int cycles) +{ + int idx = UBICOM32_VECTOR_TO_TIMER_INDEX(timervector); + UBICOM32_IO_TIMER->syscom[idx] = + UBICOM32_IO_TIMER->sysval + cycles; + ldsr_enable_vector(timervector); +} + +/* + * timer_reset() + * Set/reset the timer to go off again. + * + * Because sysval is a continuous timer, this function is able + * to ensure that we do not have clock sku by using the previous + * value in syscom to set the next value for syscom. + * + * Returns the number of ticks that transpired since the last event. + */ +int timer_reset(int timervector, unsigned int cycles) +{ + /* + * Reset the timer in the LDSR thread to go off appropriately. + * + * Use the previous value of the timer to calculate the new stop + * time. This allows us to account for it taking an + * indeterminate amount of time to get here. + */ + const int timer_index = UBICOM32_VECTOR_TO_TIMER_INDEX(timervector); + unsigned int prev = UBICOM32_IO_TIMER->syscom[timer_index]; + unsigned int next = prev + cycles; + int scratchpad3; + int diff; + int ticks = 1; + + /* + * If the difference is negative, we have missed at least one + * timer tick. + * + * TODO: Decide if we want to "ignore" time (as done below) or + * if we want to process time (unevenly) by calling timer_tick() + * lost_ticks times. + */ + while (1) { + /* + * Set our future time first. + */ + UBICOM32_IO_TIMER->syscom[timer_index] = next; + + /* + * Then check if we are really set time in the futrue. + */ + diff = (int)next - (int)UBICOM32_IO_TIMER->sysval; + if (diff >= 0) { + break; + } + + /* + * Oops, we are too slow. Playing catch up. + * + * If the debugger is connected the there is a good + * chance that we lost time because we were in a + * break-point, so in this case we do not print out + * diagnostics. + */ + asm volatile ("move.4 %0, scratchpad3" + : "=r" (scratchpad3)); + if ((scratchpad3 & 0x1) == 0) { + /* + * No debugger attached, print to the console + */ + printk(KERN_EMERG "diff: %d, timer has lost %u " + "ticks [rounded up]\n", + -diff, + (unsigned int)((-diff + cycles - 1) / cycles)); + } + + do { + next += cycles; + diff = (int)next - (int)UBICOM32_IO_TIMER->sysval; + ticks++; + } while (diff < 0); + } + return ticks; +} + +/* + * sched_clock() + * Returns current time in nano-second units. + * + * Notes: + * 1) This is an override for the weak alias in + * kernel/sched_clock.c. + * 2) Do not use xtime_lock as this function is + * sometimes called with xtime_lock held. + * 3) We use a retry algorithm to ensure that + * we get a consistent value. + * 4) sched_clock must be overwritten if IRQ tracing + * is enabled because the default implementation uses + * the xtime_lock sequence while holding xtime_lock. + */ +unsigned long long sched_clock(void) +{ + unsigned long long my_jiffies; + unsigned long jiffies_top; + unsigned long jiffies_bottom; + + do { + jiffies_top = jiffies_64 >> 32; + jiffies_bottom = jiffies_64 & 0xffffffff; + } while (unlikely(jiffies_top != (unsigned long)(jiffies_64 >> 32))); + + my_jiffies = ((unsigned long long)jiffies_top << 32) | (jiffies_bottom); + return (my_jiffies - INITIAL_JIFFIES) * (NSEC_PER_SEC / HZ); +} + +/* + * timer_free() + * Free a hardware timer. + */ +void timer_free(int interrupt) +{ + unsigned int bit = interrupt - TIMER_INT(0); + + /* + * The timer had not been allocated. + */ + BUG_ON(timers & (1 << bit)); + timers |= (1 << bit); +} + +/* + * timer_alloc() + * Allocate a hardware timer. + */ +int timer_alloc(void) +{ + unsigned int bit = find_first_bit((unsigned long *)&timers, 32); + if (!bit) { + printk(KERN_WARNING "no more free timers\n"); + return -1; + } + + timers &= ~(1 << bit); + return bit + TIMER_INT(0); +} + +/* + * time_init() + * Time init function. + */ +void time_init(void) +{ + /* + * Find the processor node and determine what timers are + * available for us. + */ + timers = processor_timers(); + if (timers == 0) { + printk(KERN_WARNING "no timers are available for Linux\n"); + return; + } + +#ifdef CONFIG_GENERIC_CLOCKEVENTS + timer_device_init(); +#else + timer_tick_init(); +#endif +} diff --git a/target/linux/ubicom32/files/arch/ubicom32/kernel/timer_broadcast.c b/target/linux/ubicom32/files/arch/ubicom32/kernel/timer_broadcast.c new file mode 100644 index 0000000000..8f0cdc4d55 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/kernel/timer_broadcast.c @@ -0,0 +1,102 @@ +/* + * arch/ubicom32/kernel/timer_broadcast.c + * Implements a dummy clock event for each cpu. + * + * Copyright (C) 2008 Paul Mundt + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + * arch/arm + * arch/sh + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/smp.h> +#include <linux/jiffies.h> +#include <linux/percpu.h> +#include <linux/clockchips.h> +#include <linux/irq.h> + +static DEFINE_PER_CPU(struct clock_event_device, local_clockevent); + +/* + * The broadcast trick only works when the timer will be used in a periodic mode. + * If the user has configured either NO_HZ or HIGH_RES_TIMERS they must have + * a per cpu timer. + */ +#if defined(CONFIG_NO_HZ) || defined(CONFIG_HIGH_RES_TIMERS) +#error "Tickless and High Resolution Timers require per-CPU local timers: CONFIG_LOCAL_TIMERS" +#endif + +/* + * local_timer_interrupt() + * Used on SMP for local timer interrupt sent via an IPI. + */ +void local_timer_interrupt(void) +{ + struct clock_event_device *dev = &__get_cpu_var(local_clockevent); + + dev->event_handler(dev); +} + +/* + * dummy_timer_set_next_event() + * Cause the timer to go off "cycles" from now. + */ +static int dummy_timer_set_next_event(unsigned long cycles, struct clock_event_device *dev) +{ + return 0; +} + +/* + * dummy_timer_set_mode() + * Do Nothing. + */ +static void dummy_timer_set_mode(enum clock_event_mode mode, + struct clock_event_device *clk) +{ +} + +/* + * local_timer_setup() + * Adds a clock event for the specified cpu. + */ +int __cpuinit local_timer_setup(unsigned int cpu) +{ + struct clock_event_device *dev = &per_cpu(local_clockevent, cpu); + + dev->name = "timer-dummy"; + dev->features = CLOCK_EVT_FEAT_DUMMY; + dev->rating = 200; + dev->mult = 1; + dev->set_mode = dummy_timer_set_mode; + dev->set_next_event = dummy_timer_set_next_event; + dev->broadcast = smp_timer_broadcast; + dev->cpumask = cpumask_of_cpu(cpu); + dev->irq = -1; + printk(KERN_NOTICE "timer[%d]: %s - created\n", dev->irq, dev->name); + + clockevents_register_device(dev); + return 0; +} diff --git a/target/linux/ubicom32/files/arch/ubicom32/kernel/timer_device.c b/target/linux/ubicom32/files/arch/ubicom32/kernel/timer_device.c new file mode 100644 index 0000000000..d2d094d37a --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/kernel/timer_device.c @@ -0,0 +1,301 @@ +/* + * arch/ubicom32/kernel/timer_device.c + * Implements a Ubicom32 clock device and event devices. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#include <linux/types.h> +#include <linux/clockchips.h> +#include <linux/clocksource.h> +#include <linux/spinlock.h> +#include <asm/ip5000.h> +#include <asm/machdep.h> + +#if defined(CONFIG_SMP) +#include <asm/smp.h> +#endif + +#if defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST) +#define MAX_TIMERS (2 + CONFIG_TIMER_EXTRA_ALLOC) +#else +#define MAX_TIMERS (NR_CPUS + CONFIG_TIMER_EXTRA_ALLOC) +#endif + +#if (MAX_TIMERS > 10) +#error "Ubicom32 only has 10 timers" +#endif + +static unsigned int frequency; +static struct clock_event_device timer_device_devs[MAX_TIMERS]; +static struct irqaction timer_device_irqs[MAX_TIMERS]; +static int timer_device_next_timer = 0; + +DEFINE_SPINLOCK(timer_device_lock); + +/* + * timer_device_set_next_event() + * Cause the timer to go off "cycles" from now. + */ +static int timer_device_set_next_event(unsigned long cycles, struct clock_event_device *dev) +{ + timer_set(dev->irq, cycles); + return 0; +} + +/* + * timer_device_set_mode() + * Handle the mode switch for a clock event device. + */ +static void timer_device_set_mode(enum clock_event_mode mode, struct clock_event_device *dev) +{ + switch (mode) { + case CLOCK_EVT_MODE_SHUTDOWN: + /* + * Make sure the vector is disabled + * until the next event is set. + */ + printk(KERN_NOTICE "timer[%d]: shutdown\n", dev->irq); + ldsr_disable_vector(dev->irq); + break; + + case CLOCK_EVT_MODE_ONESHOT: + /* + * Make sure the vector is disabled + * until the next event is set. + */ + printk(KERN_NOTICE "timer[%d]: oneshot\n", dev->irq); + ldsr_disable_vector(dev->irq); + break; + + case CLOCK_EVT_MODE_PERIODIC: + /* + * The periodic request is 1 per jiffies + */ + printk(KERN_NOTICE "timer[%d]: periodic: %d cycles\n", + dev->irq, frequency / CONFIG_HZ); + timer_set(dev->irq, frequency / CONFIG_HZ); + break; + + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_RESUME: + printk(KERN_WARNING "timer[%d]: unimplemented mode: %d\n", + dev->irq, mode); + break; + }; +} + +/* + * timer_device_event() + * Call the device's event handler. + * + * The pointer is initialized by the generic Linux code + * to the function to be called. + */ +static irqreturn_t timer_device_event(int irq, void *dev_id) +{ + struct clock_event_device *dev = (struct clock_event_device *)dev_id; + + if (dev->mode == CLOCK_EVT_MODE_PERIODIC) { + /* + * The periodic request is 1 per jiffies + */ + timer_reset(dev->irq, frequency / CONFIG_HZ); + } else { + /* + * The timer will go off again at the rollover + * point. We must disable the IRQ to prevent + * getting a spurious interrupt. + */ + ldsr_disable_vector(dev->irq); + } + + if (!dev->event_handler) { + printk(KERN_CRIT "no registered event handler\n"); + return IRQ_HANDLED; + } + + dev->event_handler(dev); + return IRQ_HANDLED; +} + +/* + * timer_device_clockbase_read() + * Provide a primary clocksource around the sysval timer. + */ +static cycle_t timer_device_clockbase_read(void) +{ + return (cycle_t)UBICOM32_IO_TIMER->sysval; +} + +/* + * Primary Clock Source Description + * + * We use 24 for the shift factor because we want + * to ensure there are less than 2^24 clocks + * in a jiffie of 10 ms. + */ +static struct clocksource timer_device_clockbase = { + .name = "sysval", + .rating = 400, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, + .mask = CLOCKSOURCE_MASK(32), + .shift = 24, + .mult = 0, + .read = timer_device_clockbase_read, +}; + +/* + * timer_device_alloc_event() + * Allocate a timer device event. + */ +static int timer_device_alloc_event(const char *name, int cpuid, const cpumask_t *mask) +{ + struct clock_event_device *dev; + struct irqaction *action; + + /* + * Are we out of configured timers? + */ + spin_lock(&timer_device_lock); + if (timer_device_next_timer >= MAX_TIMERS) { + spin_unlock(&timer_device_lock); + printk(KERN_WARNING "out of timer event entries\n"); + return -1; + } + dev = &timer_device_devs[timer_device_next_timer]; + action = &timer_device_irqs[timer_device_next_timer]; + timer_device_next_timer++; + spin_unlock(&timer_device_lock); + + /* + * Now allocate a timer to ourselves. + */ + dev->irq = timer_alloc(); + if (dev->irq == -1) { + spin_lock(&timer_device_lock); + timer_device_next_timer--; + spin_unlock(&timer_device_lock); + printk(KERN_WARNING "out of hardware timers\n"); + return -1; + } + + /* + * Init the IRQ action structure. Make sure + * this in place before you register the clock + * event device. + */ + action->name = name; + action->flags = IRQF_DISABLED | IRQF_TIMER; + action->handler = timer_device_event; + cpumask_copy(&action->mask, mask); + action->dev_id = dev; + setup_irq(dev->irq, action); + irq_set_affinity(dev->irq, mask); + ldsr_disable_vector(dev->irq); + + /* + * init clock dev structure. + * + * The min_delta_ns is chosen to ensure that setting next + * event will never be requested with too small of value. + */ + dev->name = name; + dev->rating = timer_device_clockbase.rating; + dev->shift = timer_device_clockbase.shift; + dev->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT; + dev->set_mode = timer_device_set_mode; + dev->set_next_event = timer_device_set_next_event; + dev->mult = div_sc(frequency, NSEC_PER_SEC, dev->shift); + dev->max_delta_ns = clockevent_delta2ns(0xffffffff, dev); + dev->min_delta_ns = clockevent_delta2ns(100, dev); + dev->cpumask = mask; + printk(KERN_NOTICE "timer[%d]: %s - created\n", dev->irq, dev->name); + + /* + * Now register the device. + */ + clockevents_register_device(dev); + return dev->irq; +} + +#if defined(CONFIG_LOCAL_TIMERS) +/* + * local_timer_setup() + * Allocation function for creating a per cpu local timer. + */ +int __cpuinit local_timer_setup(unsigned int cpu) +{ + return timer_device_alloc_event("timer-cpu", cpu, cpumask_of(cpu)); +} +#endif + +/* + * timer_device_init() + * Create and init a generic clock driver for Ubicom32. + */ +void timer_device_init(void) +{ + int i; + + /* + * Get the frequency from the processor device tree node or use + * the default if not available. We will store this as the frequency + * of the timer to avoid future calculations. + */ + frequency = processor_frequency(); + if (frequency == 0) { + frequency = CLOCK_TICK_RATE; + } + + /* + * Setup the primary clock source around sysval. Linux does not + * supply a Mhz multiplier so convert down to khz. + */ + timer_device_clockbase.mult = + clocksource_khz2mult(frequency / 1000, + timer_device_clockbase.shift); + if (clocksource_register(&timer_device_clockbase)) { + printk(KERN_ERR "timer: clocksource failed to register\n"); + return; + } + + /* + * Always allocate a primary timer. + */ + timer_device_alloc_event("timer-primary", -1, CPU_MASK_ALL_PTR); + +#if defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST) + /* + * If BROADCAST is selected we need to add a broadcast timer. + */ + timer_device_alloc_event("timer-broadcast", -1, CPU_MASK_ALL_PTR); +#endif + + /* + * Allocate extra timers that are requested. + */ + for (i = 0; i < CONFIG_TIMER_EXTRA_ALLOC; i++) { + timer_device_alloc_event("timer-extra", -1, CPU_MASK_ALL_PTR); + } +} diff --git a/target/linux/ubicom32/files/arch/ubicom32/kernel/timer_tick.c b/target/linux/ubicom32/files/arch/ubicom32/kernel/timer_tick.c new file mode 100644 index 0000000000..7a2ad49498 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/kernel/timer_tick.c @@ -0,0 +1,109 @@ +/* + * arch/ubicom32/kernel/timer_tick.c + * Impelemets a perodic timer. + * + * (C) Copyright 2009, Ubicom, Inc. + * Copyright (C) 1991, 1992, 1995 Linus Torvalds + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ + +#include <linux/profile.h> + +#include <asm/ip5000.h> +#include <asm/machdep.h> +#if defined(CONFIG_SMP) +#include <asm/smp.h> +#endif + +static unsigned int timervector; +static unsigned int frequency; + +/* + * timer_tick() + * Kernel system timer support. Needs to keep up the real-time clock, + * as well as call the "do_timer()" routine every clocktick. + */ +static irqreturn_t timer_tick(int irq, void *dummy) +{ + int ticks; + + BUG_ON(!irqs_disabled()); + ticks = timer_reset(timervector, frequency); + + write_seqlock(&xtime_lock); + do_timer(ticks); + write_sequnlock(&xtime_lock); + + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); + +#if defined(CONFIG_SMP) + smp_send_timer_all(); +#endif + return(IRQ_HANDLED); +} + +/* + * Data used by setup_irq for the timer. + */ +static struct irqaction timer_irq = { + .name = "timer", + .flags = IRQF_DISABLED | IRQF_TIMER, + .handler = timer_tick, +}; + +/* + * timer_tick_init() + * Implements a periodic timer + * + * This implementation directly calls the timer_tick() and move + * the Linux kernel forward. This is used when the user has not + * selected GENERIC_CLOCKEVENTS. + */ +void timer_tick_init(void) +{ + /* + * Now allocate a timer to ourselves. + */ + timervector = timer_alloc(); + if (timervector == -1) { + printk(KERN_WARNING "where did the timer go?\n"); + return; + } + + setup_irq(timervector, &timer_irq); + + /* + * Get the frequency from the processor device tree node or use + * the default if not available. We will store this as the frequency + * of the timer to avoid future calculations. + */ + frequency = processor_frequency(); + if (frequency == 0) { + frequency = CLOCK_TICK_RATE; + } + frequency /= CONFIG_HZ; + + printk(KERN_NOTICE "timer will interrupt every: %d cycles\n", frequency); + timer_set(timervector, frequency); +} diff --git a/target/linux/ubicom32/files/arch/ubicom32/kernel/topology.c b/target/linux/ubicom32/files/arch/ubicom32/kernel/topology.c new file mode 100644 index 0000000000..0676a16587 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/kernel/topology.c @@ -0,0 +1,47 @@ +/* + * arch/ubicom32/kernel/topology.c + * Ubicom32 architecture sysfs topology information. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ + +#include <linux/init.h> +#include <linux/smp.h> +#include <linux/cpu.h> +#include <linux/cache.h> + +static struct cpu cpu_devices[NR_CPUS] __read_mostly; + +static int __init topology_init(void) +{ + int num; + + for_each_present_cpu(num) { + cpu_devices[num].hotpluggable = 0; + register_cpu(&cpu_devices[num], num); + } + return 0; +} + +subsys_initcall(topology_init); diff --git a/target/linux/ubicom32/files/arch/ubicom32/kernel/traps.c b/target/linux/ubicom32/files/arch/ubicom32/kernel/traps.c new file mode 100644 index 0000000000..8cb22e25ea --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/kernel/traps.c @@ -0,0 +1,514 @@ +/* + * arch/ubicom32/kernel/traps.c + * Ubicom32 architecture trap handling support. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ + +/* + * Sets up all exception vectors + */ +#include <linux/sched.h> +#include <linux/signal.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/a.out.h> +#include <linux/user.h> +#include <linux/string.h> +#include <linux/linkage.h> +#include <linux/init.h> +#include <linux/ptrace.h> +#include <linux/kallsyms.h> +#include <linux/compiler.h> +#include <linux/stacktrace.h> +#include <linux/personality.h> + +#include <asm/uaccess.h> +#include <asm/stacktrace.h> +#include <asm/devtree.h> +#include <asm/setup.h> +#include <asm/fpu.h> +#include <asm/system.h> +#include <asm/traps.h> +#include <asm/pgtable.h> +#include <asm/processor.h> +#include <asm/machdep.h> +#include <asm/siginfo.h> +#include <asm/ip5000.h> +#include <asm/thread.h> + +#define TRAP_MAX_STACK_DEPTH 20 + +/* + * These symbols are filled in by the linker. + */ +extern unsigned long _stext; +extern unsigned long _etext; + +extern unsigned long __ocm_text_run_begin; +extern unsigned long __data_begin; + +extern void show_vmas(struct task_struct *task); + +const char *trap_cause_strings[] = { + /*0*/ "inst address decode error", + /*1*/ "inst sync error", + /*2*/ "inst illegal", + /*3*/ "src1 address decode error", + /*4*/ "dst address decode error", + /*5*/ "src1 alignment error", + /*6*/ "dst alignment error", + /*7*/ "src1 sync error", + /*8*/ "dst sync error", + /*9*/ "DCAPT error", + /*10*/ "inst range error", + /*11*/ "src1 range error", + /*12*/ "dst range error", +}; + +/* + * The device tree trap node definition. + */ +struct trapnode { + struct devtree_node dn; + unsigned int intthread; +}; + +static struct trapnode *tn;; + +/* + * trap_interrupt_handler() + * Software Interrupt to ensure that a trap is serviced. + */ +static irqreturn_t trap_interrupt_handler(int irq, void *dummy) +{ + /* Do Nothing */ + return IRQ_HANDLED; +} + +/* + * Data used by setup_irq for the timer. + */ +static struct irqaction trap_irq = { + .name = "trap", + .flags = IRQF_DISABLED, + .handler = trap_interrupt_handler, +}; + +/* + * trap_cause_to_str() + * Convert a trap_cause into a series of printk + */ +static void trap_cause_to_str(long status) +{ + int bit; + + if ((status & ((1 << TRAP_CAUSE_TOTAL) - 1)) == 0) { + printk(KERN_NOTICE "decode: UNKNOWN CAUSES\n"); + return; + } + + for (bit = 0; bit < TRAP_CAUSE_TOTAL; bit++) { + if (status & (1 << bit)) { + printk(KERN_NOTICE "\tdecode: %08x %s\n", + 1 << bit, trap_cause_strings[bit]); + } + } +} + +/* + * trap_print_information() + * Print the cause of the trap and additional info. + */ +static void trap_print_information(const char *str, struct pt_regs *regs) +{ + printk(KERN_WARNING "\n"); + + if (current) { + printk(KERN_WARNING "Process %s (pid: %d)\n", + current->comm, current->pid); + } + + if (current && current->mm) { + printk(KERN_NOTICE "text = 0x%p-0x%p data = 0x%p-0x%p\n" + KERN_NOTICE "bss = 0x%p-0x%p user-stack = 0x%p\n" + KERN_NOTICE "\n", + (void *)current->mm->start_code, + (void *)current->mm->end_code, + (void *)current->mm->start_data, + (void *)current->mm->end_data, + (void *)current->mm->end_data, + (void *)current->mm->brk, + (void *)current->mm->start_stack); + } + + printk(KERN_WARNING "%s: Causes: 0x%08x\n", str, + (unsigned int)regs->trap_cause); + trap_cause_to_str(regs->trap_cause); + show_regs(regs); + show_stack(NULL, (unsigned long *)regs->an[7]); + printk(KERN_NOTICE "--- End Trap --- \n"); +} + +/* + * dump_stack() + * Dump the stack of the current task. + */ +void dump_stack(void) +{ + show_stack(NULL, NULL); +} +EXPORT_SYMBOL(dump_stack); + +/* + * show_stack() + * Print out information from the current stack. + */ +void show_stack(struct task_struct *task, unsigned long *sp) +{ + /* + * Allocate just enough entries on the stack. + */ + unsigned int calls[TRAP_MAX_STACK_DEPTH]; + unsigned long code_start; + unsigned long code_end; + unsigned long ocm_code_start = (unsigned long)&__ocm_text_run_begin; + unsigned long ocm_code_end = (unsigned long)&__data_begin; + unsigned long stack_end = (unsigned long)(current->stack + THREAD_SIZE - 8); + unsigned long stack = (unsigned long)sp; + int kernel_stack = 1; + + processor_dram(&code_start, &code_end); + + /* + * Which task are we talking about. + */ + if (!task) { + task = current; + } + + /* + * Find the stack for the task if one was not specified. Otherwise + * use the specified stack. + */ + if (!stack) { + if (task != current) { + stack = task->thread.sp; + stack_end = (unsigned long)task->stack + THREAD_SIZE - 8; + } else { + asm volatile ( + "move.4 %0, SP \n\t" + : "=r" (stack) + ); + } + } + + printk(KERN_NOTICE "Starting backtrace: PID %d '%s'\n", + task->pid, task->comm); + + /* + * We do 2 passes the first pass is Kernel stack is the second + * User stack. + */ + while (kernel_stack) { + unsigned long *handle; + unsigned int i, idx = 0; + struct pt_regs *pt = task_pt_regs(task); + + /* + * If the task is in user mode, reset the start + * and end values for text. + */ + if (__user_mode(stack)) { + if (!(task->personality & FDPIC_FUNCPTRS)) { + printk(KERN_NOTICE " User Stack:\n"); + code_start = task->mm->start_code; + code_end = task->mm->end_code; + } else { + printk(KERN_NOTICE " User Stack (fdpic):\n"); + show_vmas(task); + } + stack_end = task->mm->start_stack; + ocm_code_end = ocm_code_start = 0; + kernel_stack = 0; + } else { + printk(KERN_NOTICE " Kernel Stack:\n"); + } + + /* + * Collect the stack back trace information. + */ + printk(" code[0x%lx-0x%lx]", code_start, code_end); + if (ocm_code_start) { + printk(" ocm_code[0x%lx-0x%lx]", + ocm_code_start, ocm_code_end); + } + printk("\n stack[0x%lx-0x%lx]\n", stack, stack_end); + + handle = (unsigned long*)stack; + while (idx < TRAP_MAX_STACK_DEPTH) { + calls[idx] = stacktrace_iterate(&handle, + code_start, code_end, + ocm_code_start, ocm_code_end, + (unsigned long)stack, stack_end); + if (calls[idx] == 0) { + break; + } + idx++; + } + + /* + * Now print out the data. + */ + printk(KERN_NOTICE " CALL && CALLI on stack:"); + for (i = 0; i < idx; i++) { + printk("%s0x%x, ", (i & 0x3) == 0 ? "\n " : "", + calls[i]); + } + printk(idx == TRAP_MAX_STACK_DEPTH ? "...\n" : "\n"); + + /* + * If we are doing user stack we are done + */ + if (!kernel_stack) { + break; + } + + /* + * Does this kernel stack have a mm (i.e. is it user) + */ + if (!task->mm) { + printk("No mm for userspace stack.\n"); + break; + } + /* + * Get the user-mode stack (if any) + */ + stack = pt->an[7]; + printk(KERN_NOTICE "Userspace stack at 0x%lx frame type %d\n", + stack, (int)pt->frame_type); + if (!__user_mode(stack)) { + break; + } + } +} + +/* + * die_if_kernel() + * Determine if we are in kernel mode and if so print stuff out and die. + */ +void die_if_kernel(char *str, struct pt_regs *regs, long trap_cause) +{ + unsigned int s3value; + + if (user_mode(regs)) { + return; + } + + console_verbose(); + trap_print_information(str, regs); + + /* + * If the debugger is attached via the hardware mailbox protocol, + * go into an infinite loop and the debugger will figure things out. + */ + asm volatile ( + "move.4 %0, scratchpad3" + : "=r" (s3value) + ); + if (s3value) { + asm volatile("1: jmpt.t 1b"); + } + + /* + * Set the debug taint value. + */ + add_taint(TAINT_DIE); + do_exit(SIGSEGV); +} + +/* + * trap_handler() + * Handle traps. + * + * Traps are treated as interrupts and registered with the LDSR. When + * the LDSR takes the interrupt, it will determine if a trap has occurred + * and service the trap prior to servicing the interrupt. + * + * This function is directly called by the LDSR. + */ +void trap_handler(int irq, struct pt_regs *regs) +{ + int sig = SIGSEGV; + siginfo_t info; + unsigned int trap_cause = regs->trap_cause; + + BUG_ON(!irqs_disabled()); + + /* + * test if in kernel and die. + */ + die_if_kernel("Kernel Trap", regs, trap_cause); + + /* + * User process problem, setup a signal for this process + */ + if ((trap_cause & (1 << TRAP_CAUSE_DST_RANGE_ERR)) || + (trap_cause & (1 << TRAP_CAUSE_SRC1_RANGE_ERR)) || + (trap_cause & (1 << TRAP_CAUSE_I_RANGE_ERR))) { + sig = SIGSEGV; + info.si_code = SEGV_MAPERR; + } else if ((trap_cause & (1 << TRAP_CAUSE_DST_MISALIGNED)) || + (trap_cause & (1 << TRAP_CAUSE_SRC1_MISALIGNED))) { + sig = SIGBUS; + info.si_code = BUS_ADRALN; + } else if ((trap_cause & (1 << TRAP_CAUSE_DST_DECODE_ERR)) || + (trap_cause & (1 << TRAP_CAUSE_SRC1_DECODE_ERR))) { + sig = SIGILL; + info.si_code = ILL_ILLOPN; + } else if ((trap_cause & (1 << TRAP_CAUSE_ILLEGAL_INST))) { + /* + * Check for software break point and if found signal trap + * not illegal instruction. + */ + unsigned long instruction; + if (between(regs->pc, KERNELSTART, memory_end) && + (regs->pc & 3) == 0 && + get_user(instruction, (unsigned long *)regs->pc) == 0) { + + /* + * This used to be 0xaabbccdd but it turns out + * that is now valid in ubicom32v4 isa so we + * have switched to 0xfabbccdd + */ + if ((instruction == 0xfabbccdd) || + (instruction == 0xaabbccdd)) { + sig = SIGTRAP; + info.si_code = TRAP_BRKPT; + goto send_signal; + } + } + sig = SIGILL; + info.si_code = ILL_ILLOPC; + } else if ((trap_cause & (1 << TRAP_CAUSE_I_DECODE_ERR))) { + sig = SIGILL; + info.si_code = ILL_ILLOPC; + } else if ((trap_cause & (1 << TRAP_CAUSE_DCAPT))) { + sig = SIGTRAP; + info.si_code = TRAP_TRACE; + } + + /* + * Print a trap information block to the console, do not + * print this above the case because we don't want it + * printed for software break points. + */ + trap_print_information("User Trap", regs); + +send_signal: + + force_sig_info(sig, &info, current); + + /* + * Interrupts are disabled, re-enable them now. + */ + if (!irqs_disabled()) { + printk(KERN_EMERG "interrupts enabled on exit, irq=%d, regs=%p", + irq, regs); + BUG(); + } +} + +/* + * trap_init_interrupt() + * We need a 2nd trap handling init that will occur after init_IRQ(). + */ +void __init trap_init_interrupt(void) +{ + int err; + unsigned char tirq; + struct devtree_node *dn = (struct devtree_node *)tn; + + /* + * Now setup the Software IRQ so that if a trap occurs the LDSR + * is started. The irq is there just to "force" the LDSR to run. + */ + if (!tn) { + printk(KERN_WARNING "trap_init_interrupt skipped.\n"); + return; + } + + err = devtree_irq(dn, NULL, &tirq); + if (err) { + printk(KERN_WARNING "error obtaining trap irq value: %d\n", + err); + return; + } + + if (tirq == DEVTREE_IRQ_NONE) { + printk(KERN_WARNING "trap irq not available: %d\n", tirq); + return; + } + + err = setup_irq(tirq, &trap_irq); + if (err) { + printk(KERN_WARNING "trap irq setup failed: %d\n", err); + return; + } + + /* + * Let ultra know which thread is handling the traps and + * what the interrupt to use is. + */ + tn->intthread = ldsr_get_threadid(); + + /* + * Tell the LDSR about our IRQ so that it will unsuspend + * if one occurs while waiting for the per thread lock. + */ + ldsr_set_trap_irq(tirq); +} + +/* + * trap_init() + * init trap handling + * + * Trap handling is done through the ldsr. Every time an interrupt + * occurs, the LDSR looks for threads that are listed in the TRAP + * register and forces a call to the trap handler. + */ +void __init trap_init(void) +{ + /* + * If we do not have a trap node in the device tree, we leave the fault + * handling to the underlying hardware. + */ + tn = (struct trapnode *)devtree_find_node("traps"); + if (!tn) { + printk(KERN_WARNING "traps are not handled by linux\n"); + return; + } +} diff --git a/target/linux/ubicom32/files/arch/ubicom32/kernel/uaccess.c b/target/linux/ubicom32/files/arch/ubicom32/kernel/uaccess.c new file mode 100644 index 0000000000..2fe5f5f87c --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/kernel/uaccess.c @@ -0,0 +1,109 @@ +/* + * arch/ubicom32/include/asm/uaccess.c + * User space memory access functions for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ + +#include <linux/sched.h> +#include <linux/mm.h> +#include <linux/string.h> +#include <linux/module.h> + +#include <asm/segment.h> +#include <asm/uaccess.h> + +extern int _stext, _etext, _sdata, _edata, _sbss, _ebss, _end; + +/* + * __access_ok() + * Check that the address is in the current processes. + * + * NOTE: The kernel uses "pretend" user addresses that wind + * up calling access_ok() so this approach has only marginal + * value because you wind up with lots of false positives. + */ +int __access_ok(unsigned long addr, unsigned long size) +{ + // struct vm_area_struct *vma; + + /* + * Don't do anything if we are not a running system yet. + */ + if (system_state != SYSTEM_RUNNING) { + return 1; + } + + /* + * It appears that Linux will call this function even when we are not + * in the context of a user space application that has a VM address + * space. So we must check that current and mm are valid before + * performing the check. + */ + if ((!current) || (!current->mm)) { + return 1; + } + + /* + * We perform some basic checks on the address to ensure that it + * is at least within the range of DRAM. + */ + if ((addr < (int)&_etext) || (addr > memory_end)) { + printk(KERN_WARNING "pid=%d[%s]: range [%lx - %lx] not in memory area: [%lx - %lx]\n", + current->pid, current->comm, + addr, addr + size, + memory_start, memory_end); + return 0; + } + + /* + * For nommu Linux we can check this by looking at the allowed + * memory map for the process. + * + * TODO: Since the kernel passes addresses in it's own space as though + * they were user address, we can not validate the addresses this way. + */ +#if 0 + if (!down_read_trylock(¤t->mm->mmap_sem)) { + return 1; + } + vma = find_vma(current->mm, addr); + if (!vma) { + up_read(¤t->mm->mmap_sem); + printk(KERN_WARNING "pid=%d[%s]: possible invalid acesss on range: [%lx - %lx]\n", + current->pid, current->comm, addr, addr + size); + return 1; + } + if ((addr + size) > vma->vm_end) { + up_read(¤t->mm->mmap_sem); + printk(KERN_WARNING "pid=%d[%s]: possible invalid length on range: [%lx - %lx]\n", + current->pid, current->comm, addr, addr + size); + return 1; + } + up_read(¤t->mm->mmap_sem); +#endif + return 1; +} + +EXPORT_SYMBOL(__access_ok); diff --git a/target/linux/ubicom32/files/arch/ubicom32/kernel/ubicom32_context_switch.S b/target/linux/ubicom32/files/arch/ubicom32/kernel/ubicom32_context_switch.S new file mode 100644 index 0000000000..08db4c057a --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/kernel/ubicom32_context_switch.S @@ -0,0 +1,359 @@ +/* + * arch/ubicom32/kernel/ubicom32_context_switch.S + * Implements context switch and return functions. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#include <linux/sys.h> +#include <linux/linkage.h> +#include <asm/asm-offsets.h> +#include <asm/ubicom32-common.h> +#include <asm/ip5000.h> +#include <asm/range-protect.h> + +/* + * begin_restore_context() + * Restore most of the context from sp (struct pt_reg *) + * + * This *can* be called without the global atomic lock. (because sp is + * not restored!) Only d15 and a3 are allowed to be used after this + * before calling complete_restore_context + */ +.macro begin_restore_context + move.4 d0, PT_D0(sp) + move.4 d1, PT_D1(sp) + move.4 d2, PT_D2(sp) + move.4 d3, PT_D3(sp) + move.4 d4, PT_D4(sp) + move.4 d5, PT_D5(sp) + move.4 d6, PT_D6(sp) + move.4 d7, PT_D7(sp) + move.4 d8, PT_D8(sp) + move.4 d9, PT_D9(sp) + move.4 d10, PT_D10(sp) + move.4 d11, PT_D11(sp) + move.4 d12, PT_D12(sp) + move.4 d13, PT_D13(sp) + move.4 d14, PT_D14(sp) +;; move.4 d15, PT_D15(sp) + move.4 a0, PT_A0(sp) + move.4 a1, PT_A1(sp) + move.4 a2, PT_A2(sp) +;; move.4 a3, PT_A3(sp) + move.4 a4, PT_A4(sp) + move.4 a5, PT_A5(sp) + move.4 a6, PT_A6(sp) + move.4 acc0_hi, PT_ACC0HI(sp) + move.4 acc0_lo, PT_ACC0LO(sp) + move.4 mac_rc16, PT_MAC_RC16(sp) + move.4 acc1_hi, PT_ACC1HI(sp) + move.4 acc1_lo, PT_ACC1LO(sp) + move.4 source3, PT_SOURCE3(sp) + move.4 int_mask0, PT_INT_MASK0(sp) + move.4 int_mask1, PT_INT_MASK1(sp) +.endm + +/* + * complete_restore_context() + * Completely restore the context from sp (struct pt_reg *) + * + * Note: Recovered PC and CSR are saved on the stack and are to be + * popped off before returning. + */ +.macro complete_restore_context + move.4 a3, sp + move.4 d15, PT_D15(sp) + move.4 sp, PT_SP(a3) ; Recover Stack pointer from save area + move.4 -4(sp)++, PT_PC(a3) ; Recover saved PC and save to stack + move.4 -4(sp)++, PT_CSR(a3) ; Recover saved csr and save to stack + move.4 a3, PT_A3(a3) +.endm + +/* + * old restore_context macro + */ +.macro restore_context + begin_restore_context + complete_restore_context +.endm + +/* + * ldsr_thread_enable_interrupts() + * An assembly version of the enable interrupts function. + * + * The stack is fair game but all registers MUST be preserved. + * + */ +.macro ldsr_thread_enable_interrupts + move.4 -4(sp)++, d3 ; Push d3 + move.4 -4(sp)++, a3 ; Push a3 + + /* + * Read the ROSR and obtain ~(1 << tid) + */ + lsr.4 d3, rosr, #0x2 ; Move the thread portion of ROSR into d3 + lsl.4 d3, #1, d3 ; perform a (1 << tid) + not.4 d3, d3 ; Negate the value of d3 == ~(1 << threadid) + + /* + * Get the value of the ldsr_soft_irq_mask + */ + moveai a3, #%hi(ldsr_soft_irq_mask) + move.4 a3, %lo(ldsr_soft_irq_mask)(a3) + + /* + * Now re-enable interrupts for this thread and then + * wakeup the LDSR. + */ + and.4 scratchpad1, scratchpad1, d3 + move.4 int_set0, a3 + + /* + * Restore the registers. + */ + move.4 a3, (sp)4++ + move.4 d3, (sp)4++ +.endm + +/* + * ret_from_interrupt_to_kernel() + * RFI function that is where do_IRQ() returns to if the thread was + * in kernel space. + */ + .section .text.ret_from_interrupt_to_kernel, "ax", @progbits + .global ret_from_interrupt_to_kernel +ret_from_interrupt_to_kernel: + begin_restore_context ; Restore the thread context + atomic_lock_acquire ; Enter critical section + complete_restore_context ; Restore the thread context + atomic_lock_release ; Leave critical section + ldsr_thread_enable_interrupts ; enable the threads interrupts + move.4 csr, (sp)4++ ; Restore csr from the stack + ret (sp)4++ + +/* + * ret_from_interrupt_to_user() + * RFI function that is where do_IRQ() returns to if the thread was + * in user space. + * + * TODO: Do we really need the critical section handling in this code? + * + */ + .section .text.ret_from_interrupt_to_user, "ax", @progbits + .global ret_from_interrupt_to_user +ret_from_interrupt_to_user: + ldsr_thread_enable_interrupts ; enable the threads interrupts + /* + * Set a1 to the thread info pointer, no need to save it as we are + * restoring userspace and will never return + */ + movei d0, #(~(ASM_THREAD_SIZE-1)) + and.4 a1, sp, d0 + + /* + * Test if the scheduler needs to be called. + */ + btst TI_FLAGS(a1), #ASM_TIF_NEED_RESCHED + jmpeq.t 2f + call a5, schedule ; Call the scheduler. I will come back here. + + /* + * See if we have pending signals and call do_signal + * if needed. + */ +2: + btst TI_FLAGS(a1), #ASM_TIF_SIGPENDING ; Any signals needed? + jmpeq.t 1f + + /* + * Now call do_signal() + */ + move.4 d0, #0 ; oldset pointer is NULL + move.4 d1, sp ; d1 is the regs pointer + call a5, do_signal ; Call do_signal() + + /* + * Back from do_signal(), re-enter critical section. + */ +1: + begin_restore_context ; Restore the thread context + atomic_lock_acquire ; Enter critical section + call a3, __complete_and_return_to_userspace ; jump to unprotected section + +/* + * restore_all_registers() + * + * restore_all_registers will be the alternate exit route for + * preempted processes that have called a signal handler + * and are returning back to user space. + */ + .section .text.restore_all_registers, "ax", @progbits + .global restore_all_registers +restore_all_registers: + begin_restore_context ; Restore the thread context + atomic_lock_acquire ; Enter critical section + call a3, __complete_and_return_to_userspace + +/* + * __complete_and_return_to_userspace + * + * restores the second half of the context and returns + * You must have the atomic lock when you call this function + */ + .section .kernel_unprotected, "ax", @progbits +__complete_and_return_to_userspace: + disable_kernel_ranges_for_current d15 ; disable kernel ranges + complete_restore_context ; restore previous context + atomic_lock_release ; Leave critical section + move.4 csr, (sp)4++ ; Restore csr from the stack + ret (sp)4++ + +/* + * ret_from_fork() + * Called on the child's return from fork system call. + */ + .section .text.ret_from_fork, "ax", @progbits + .global ret_from_fork +ret_from_fork: + ;;; d0 contains the arg for schedule_tail + ;;; the others we don't care about as they are in PT_REGS (sp) + call a5, schedule_tail + + atomic_lock_acquire ; Enter critical section + + move.4 a3, sp + move.4 d0, PT_D0(a3) ; Restore D0 + move.4 d1, PT_D1(a3) ; Restore D1 + move.4 d2, PT_D2(a3) ; Restore D2 + move.4 d3, PT_D3(a3) ; Restore D3 + move.4 d10, PT_D10(a3) ; Restore D10 + move.4 d11, PT_D11(a3) ; Restore D11 + move.4 d12, PT_D12(a3) ; Restore D12 + move.4 d13, PT_D13(a3) ; Restore D13 + move.4 a1, PT_A1(a3) ; Restore A1 + move.4 a2, PT_A2(a3) ; Restore A2 + move.4 a5, PT_A5(a3) ; Restore A5 + move.4 a6, PT_A6(a3) ; Restore A6 + ;; I think atomic_lock_acquire could be moved here.. + move.4 sp, PT_SP(a3) ; Restore sp + move.4 a4, PT_PC(a3) ; Restore pc in register a4 + move.4 PT_FRAME_TYPE(a3), #0 ; Clear frame_type to indicate it is invalid. + +#ifdef CONFIG_PROTECT_KERNEL + call a3, __ret_from_fork_bottom_half + .section .kernel_unprotected, "ax", @progbits +__ret_from_fork_bottom_half: + disable_kernel_ranges_for_current d15 +#endif + atomic_lock_release ; Leave critical section + calli a4, 0(a4) ; Return. + +/* + * __switch_to() + * + * Call with: + * void *__switch_to(struct task_struct *prev, struct thread_struct *prev_switch, + * struct thread_struct *next_switch) + */ + .section .text.__switch_to, "ax", @progbits + .global __switch_to +__switch_to: + + /* + * Set up register a3 to point to save area. + */ + movea a3, d1 ; a3 now holds prev_switch + move.4 (a3)4++, d10 + move.4 (a3)4++, d11 + move.4 (a3)4++, d12 + move.4 (a3)4++, d13 + move.4 (a3)4++, a1 + move.4 (a3)4++, a2 + move.4 (a3)4++, a5 + move.4 (a3)4++, a6 + move.4 (a3)4++, a7 + + /* + * Set up register a3 to point to restore area. + */ + movea a3, d2 ; a3 now holds next_switch + move.4 d10 , (a3)4++ + move.4 d11 , (a3)4++ + move.4 d12 , (a3)4++ + move.4 d13 , (a3)4++ + move.4 a1 , (a3)4++ + move.4 a2 , (a3)4++ + move.4 a5 , (a3)4++ + move.4 a6 , (a3)4++ + move.4 a7 , (a3)4++ + + /* + * Load the sw_ksp with the proper thread_info pointer. + */ + movei d15, #(~(ASM_THREAD_SIZE-1)) + and.4 a3, sp, d15 ; a3 now has the thread info pointer + moveai a4, #%hi(sw_ksp) + lea.1 a4, %lo(sw_ksp)(a4) ; a4 now has the base address of sw_ksp array + lsr.4 d15, ROSR, #2 ; Thread number - bit's 6 through 31 are zeroes anyway. + move.4 (a4, d15), a3 ; Load the thread info pointer into the hw_ksp array.. + + /* + * We are done with context switch. Time to return.. + */ + calli a5, 0(a5) + .size __switch_to, . - __switch_to + +/* + * ubicom32_emulate_insn() + * Emulates the instruction. + * + * Call with: + * unsigned int ubicom32_emulate_insn(int source1, int source2, int source3, int *save_acc, int *save_csr); + */ + .section .text.ubicom32_emulate_insn, "ax", @progbits + .global ubicom32_emulate_insn + .global trap_emulate +ubicom32_emulate_insn: + movea a3, d3 ; a3 holds save_acc pointer + movea a4, d4 ; a4 hods save_csr pointer + move.4 source3, d2 + move.4 acc0_lo, (a3) + move.4 acc0_hi, 4(a3) + move.4 acc1_lo, 8(a3) + move.4 acc1_hi, 12(a3) + move.4 mac_rc16, 16(a3) + move.4 CSR, (a4) + setcsr_flush 0 + +trap_emulate: + move.4 d0, d1 + setcsr_flush 0 + move.4 (a4), CSR ; Save csr + move.4 (a3), acc0_lo + move.4 4(a3), acc0_hi + move.4 8(a3), acc1_lo + move.4 12(a3), acc1_hi + move.4 16(a3), mac_rc16 + ret a5 + .size ubicom32_emulate_insn, . - ubicom32_emulate_insn diff --git a/target/linux/ubicom32/files/arch/ubicom32/kernel/ubicom32_ksyms.c b/target/linux/ubicom32/files/arch/ubicom32/kernel/ubicom32_ksyms.c new file mode 100644 index 0000000000..ea7eb1575a --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/kernel/ubicom32_ksyms.c @@ -0,0 +1,98 @@ +/* + * arch/ubicom32/kernel/ubicom32_ksyms.c + * Ubicom32 architecture compiler support and misc symbols. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#include <linux/module.h> +#include <linux/linkage.h> +#include <linux/sched.h> +#include <linux/string.h> +#include <linux/mm.h> +#include <linux/user.h> +#include <linux/elfcore.h> +#include <linux/in6.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/semaphore.h> + +#include <asm/setup.h> +#include <asm/machdep.h> +#include <asm/pgalloc.h> +#include <asm/irq.h> +#include <asm/checksum.h> +#include <asm/current.h> + +/* platform dependent support */ + +EXPORT_SYMBOL(__ioremap); +EXPORT_SYMBOL(iounmap); + +EXPORT_SYMBOL(ip_fast_csum); + + +/* Networking helper routines. */ +EXPORT_SYMBOL(csum_partial_copy_nocheck); + +/* The following are special because they're not called + explicitly (the C compiler generates them). Fortunately, + their interface isn't gonna change any time soon now, so + it's OK to leave it out of version control. */ +EXPORT_SYMBOL(memcpy); +EXPORT_SYMBOL(memset); +EXPORT_SYMBOL(memmove); + +#if (__GNUC__ == 4 && __GNUC_MINOR__ >= 4) || __GNUC__ > 4 +/* + * libgcc functions - functions that are used internally by the + * compiler... (prototypes are not correct though, but that + * doesn't really matter since they're not versioned). + */ +extern void __ashldi3(void); +extern void __ashrdi3(void); +extern void __divsi3(void); +extern void __divdi3(void); +extern void __lshrdi3(void); +extern void __modsi3(void); +extern void __muldi3(void); +extern void __udivsi3(void); +extern void __umodsi3(void); + +/* gcc lib functions */ +EXPORT_SYMBOL(__ashldi3); +EXPORT_SYMBOL(__ashrdi3); +EXPORT_SYMBOL(__divsi3); +EXPORT_SYMBOL(__divdi3); +EXPORT_SYMBOL(__lshrdi3); +EXPORT_SYMBOL(__modsi3); +EXPORT_SYMBOL(__muldi3); +EXPORT_SYMBOL(__udivsi3); +EXPORT_SYMBOL(__umodsi3); +#else +extern void __libgcc_udivmodsi(void); +extern void __libgcc_divmodsi(void); + +EXPORT_SYMBOL(__libgcc_udivmodsi); +EXPORT_SYMBOL(__libgcc_divmodsi); +#endif diff --git a/target/linux/ubicom32/files/arch/ubicom32/kernel/ubicom32_syscall.S b/target/linux/ubicom32/files/arch/ubicom32/kernel/ubicom32_syscall.S new file mode 100644 index 0000000000..870f66c8f4 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/kernel/ubicom32_syscall.S @@ -0,0 +1,694 @@ +/* + * arch/ubicom32/kernel/ubicom32_syscall.S + * <TODO: Replace with short file description> + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#include <linux/sys.h> +#include <linux/linkage.h> +#include <linux/unistd.h> + +#include <asm/ubicom32-common.h> +#include <asm/thread_info.h> +#include <asm/asm-offsets.h> +#include <asm/range-protect.h> + +/* + * __old_system_call() + */ + .section .old_syscall_entry.text, "ax", @progbits +#ifdef CONFIG_OLD_40400010_SYSTEM_CALL +__old_system_call: + call a3, system_call + .size __old_system_call, . - __old_system_call ; +#else + /* + * something that will crash the userspace application, but + * should not take down the kernel, if protection is enabled + * this will never even get executed. + */ + .long 0xFABBCCDE ; illegal instruction + bkpt #-1 ; we will never get here +#endif + +/* + * system_call() + */ + .section .syscall_entry.text, "ax", @progbits + .global system_call +system_call: + /* + * Regular ABI rules for function calls apply for syscall. d8 holds + * the syscall number. We will use that to index into the syscall table. + * d0 - d5 hold the parameters. + * + * First we get the current thread_info and swap to the kernel stack. + * This is done by reading the current thread and looking up the ksp + * from the sw_ksp array and storing it in a3. + * + * Then we reserve space for the syscall context a struct pt_regs and + * save it using a4 initially and later as sp. + * Once sp is set to the kernel sp we can leave the critical section. + * + * For the user case the kernel stack will have the following layout. + * + * a3 ksp[0] +-----------------------+ + * | Thread info area | + * | struct thread_info | + * +-----------------------+ + * : : + * | Kernel Stack Area | + * | | + * a4 / sp >>> +-----------------------+ + * | Context save area | + * | struct pt_reg | + * ksp[THREAD_SIZE-8] +-----------------------+ + * | 8 Byte Buffer Zone | + * ksp[THREAD_SIZE] +-----------------------+ + + * + * For kernel syscalls the layout is as follows. + * + * a3 ksp[0] +-----------------------+ + * | Thread info area | + * | struct thread_info | + * +-----------------------+ + * : : + * | Kernel Stack Area | + * | | + * a4 / sp >>> +-----------------------+ + * | Context save area | + * | struct pt_reg | + * sp at syscall entry +-----------------------+ + * | Callers Kernel Stack | + * : : + * + * Once the context is saved we optionally call syscall_trace and setup + * the exit routine and jump to the syscall. + */ + + /* + * load the base address for sw_ksp into a3 + * Note.. we cannot access it just yet as protection is still on. + */ + moveai a3, #%hi(sw_ksp) + lea.1 a3, %lo(sw_ksp)(a3) + + /* + * Enter critical section . + * + * The 'critical' aspects here are the switching the to the ksp and + * changing the protection registers, these both use per thread + * information so we need to protect from a context switch. For now this + * is done using the global atomic lock. + */ + atomic_lock_acquire + + thread_get_self d15 ; Load current thread number +#ifdef CONFIG_PROTECT_KERNEL + lsl.4 d9, #1, d15 ; Convert to thread bit + enable_kernel_ranges d9 +#endif + /* + * in order to reduce the size of code in the syscall section we get + * out of it right now + */ + call a4, __system_call_bottom_half + .size system_call, . - system_call + + .section .text.__system_call_bottom_half, "ax", @progbits +__system_call_bottom_half: + + /* + * We need to Determine if this is a kernel syscall or user syscall. + * Start by loading the pointer for the thread_info structure for the + * current process in to a3. + */ + move.4 a3, (a3, d15) ; a3 = sw_ksp[d15] + + /* + * Now if this is a kernel thread the same value can be a acheived by + * masking off the lower bits on the current stack pointer. + */ + movei d9, #(~(ASM_THREAD_SIZE-1)) ; load mask + and.4 d9, sp, d9 ; apply mask + + /* + * d9 now has the masked version of the sp. If this is identical to + * what is in a3 then don't switch to ksp as we are already in the + * kernel. + */ + sub.4 #0, a3, d9 + + /* + * if d9 and a3 are not equal. We are usespace and have to shift to + * ksp. + */ + jmpne.t 1f + + /* + * Kernel Syscall. + * + * The kernel has called this routine. We have to pdec space for pt_regs + * from sp. + */ + pdec a4, PT_SIZE(sp) ; a4 = ksp - PT_SIZE + jmpt.t 2f + + /* + * Userspace Syscall. + * + * Add THREAD_SIZE and subtract PT_SIZE to create the proper ksp + */ +1: movei d15, #(ASM_THREAD_SIZE - 8 - PT_SIZE) + lea.1 a4, (a3, d15) ; a4 = ksp + d15 + + /* + * Replace user stack pointer with kernel stack pointer (a4) + * Load -1 into frame_type in save area to indicate this is system call + * frame. + */ +2: move.4 PT_A7(a4), a7 ; Save old sp/A7 on kernel stack + move.4 PT_FRAME_TYPE(a4), #-1 ; Set the frame type. + move.4 sp, a4 ; Change to ksp. + /* + * We are now officially back in the kernel! + */ + + /* + * Now that we are on the ksp we can leave the critical section + */ + atomic_lock_release + + /* + * We need to save a0 because we need to be able to restore it in + * the event that we need to handle a signal. It's not generally + * a callee-saved register but is the GOT pointer. + */ + move.4 PT_A0(sp), a0 ; Save A0 on kernel stack + + /* + * We still need to save d10-d13, a1, a2, a5, a6 in the kernel frame + * for this process, we also save the system call params in the case of + * syscall restart. (note a7 was saved above) + */ + move.4 PT_A1(sp), a1 ; Save A1 on kernel stack + move.4 PT_A2(sp), a2 ; Save A2 on kernel stack + move.4 PT_A5(sp), a5 ; Save A5 on kernel stack + move.4 PT_A6(sp), a6 ; Save A6 on kernel stack + move.4 PT_PC(sp), a5 ; Save A5 at the PC location + move.4 PT_D10(sp), d10 ; Save D10 on kernel stack + move.4 PT_D11(sp), d11 ; Save D11 on kernel stack + move.4 PT_D12(sp), d12 ; Save D12 on kernel stack + move.4 PT_D13(sp), d13 ; Save D13 on kernel stack + + /* + * Now save the syscall parameters + */ + move.4 PT_D0(sp), d0 ; Save d0 on kernel stack + move.4 PT_ORIGINAL_D0(sp), d0 ; Save d0 on kernel stack + move.4 PT_D1(sp), d1 ; Save d1 on kernel stack + move.4 PT_D2(sp), d2 ; Save d2 on kernel stack + move.4 PT_D3(sp), d3 ; Save d3 on kernel stack + move.4 PT_D4(sp), d4 ; Save d4 on kernel stack + move.4 PT_D5(sp), d5 ; Save d5 on kernel stack + move.4 PT_D8(sp), d8 ; Save d8 on kernel stack + + /* + * Test if syscalls are being traced and if they are jump to syscall + * trace (it will comeback here) + */ + btst TI_FLAGS(a3), #ASM_TIF_SYSCALL_TRACE + jmpne.f .Lsystem_call__trace +.Lsystem_call__trace_complete: + /* + * Check for a valid call number [ 0 <= syscall_number < NR_syscalls ] + */ + cmpi d8, #0 + jmplt.f 3f + cmpi d8, #NR_syscalls + jmplt.t 4f + + /* + * They have passed an invalid number. Call sys_ni_syscall staring by + * load a4 with the base address of sys_ni_syscall + */ +3: moveai a4, #%hi(sys_ni_syscall) + lea.1 a4, %lo(sys_ni_syscall)(a4) + jmpt.t 5f ; Jump to regular processing + + /* + * Validated syscall, load the syscall table base address into a3 and + * read the syscall ptr out. + */ +4: moveai a3, #%hi(sys_call_table) + lea.1 a3, %lo(sys_call_table)(a3) ; a3 = sys_call_table + move.4 a4, (a3, d8) ; a4 = sys_call_table[d8] + + /* + * Before calling the syscall, setup a5 so that syscall_exit is called + * on return from syscall + */ +5: moveai a5, #%hi(syscall_exit) ; Setup return address + lea.1 a5, %lo(syscall_exit)(a5) ; from system call + + /* + * If the syscall is __NR_rt_rigreturn then we have to test d1 to + * figure out if we have to change change the return routine to restore + * all registers. + */ + cmpi d8, #__NR_rt_sigreturn + jmpeq.f 6f + + /* + * Launch system call (it will return through a5 - syscall_exit) + */ + calli a3, 0(a4) + + /* + * System call is rt_sigreturn. Test d1. If it is 1 we have to + * change the return address to restore_all_registers + */ +6: cmpi d1, #1 + jmpne.t 7f + + moveai a5, #%hi(restore_all_registers) ; Setup return address + lea.1 a5, %lo(restore_all_registers)(a5) ; to restore_all_registers. + + /* + * Launch system call (it will return through a5) + */ +7: calli a3, 0(a4) ; Launch system call + +.Lsystem_call__trace: + /* + * Syscalls are being traced. + * Call syscall_trace, (return here) + */ + call a5, syscall_trace + + /* + * Restore syscall state (it would have been discarded during the + * syscall trace) + */ + move.4 d0, PT_D0(sp) ; Restore d0 from kernel stack + move.4 d1, PT_D1(sp) ; Restore d1 from kernel stack + move.4 d2, PT_D2(sp) ; Restore d2 from kernel stack + move.4 d3, PT_D3(sp) ; Restore d3 from kernel stack + move.4 d4, PT_D4(sp) ; Restore d4 from kernel stack + move.4 d5, PT_D5(sp) ; Restore d5 from kernel stack + /* add this back if we ever have a syscall with 7 args */ + move.4 d8, PT_D8(sp) ; Restore d8 from kernel stack + + /* + * return to syscall + */ + jmpt.t .Lsystem_call__trace_complete + .size __system_call_bottom_half, . - __system_call_bottom_half + +/* + * syscall_exit() + */ + .section .text.syscall_exit + .global syscall_exit +syscall_exit: + /* + * d0 contains the return value. We should move that into the kernel + * stack d0 location. We will be transitioning from kernel to user + * mode. Test the flags and see if we have to call schedule. If we are + * going to truly exit then all that has to be done is that from the + * kernel stack we have to restore d0, a0, a1, a2, a5, a6 and sp (a7)bb + * and then return via a5. + */ + + /* + * Save d0 to pt_regs + */ + move.4 PT_D0(sp), d0 ; Save d0 into the kernel stack + + /* + * load the thread_info structure by masking off the THREAD_SIZE + * bits. + * + * Note: we used to push a1, but now we don't as we are going + * to eventually restore it to the userspace a1. + */ + movei d9, #(~(ASM_THREAD_SIZE-1)) + and.4 a1, sp, d9 + + /* + * Are any interesting bits set on TI flags, if there are jump + * aside to post_processing. + */ + move.4 d9, #(_TIF_SYSCALL_TRACE | _TIF_NEED_RESCHED | _TIF_SIGPENDING) + and.4 #0, TI_FLAGS(a1), d9 + jmpne.f .Lsyscall_exit__post_processing ; jump to handler +.Lsyscall_exit__post_processing_complete: + + move.4 d0, PT_D0(sp) ; Restore D0 from kernel stack + move.4 d1, PT_D1(sp) ; Restore d1 from kernel stack + move.4 d2, PT_D2(sp) ; Restore d2 from kernel stack + move.4 d3, PT_D3(sp) ; Restore d3 from kernel stack + move.4 d4, PT_D4(sp) ; Restore d4 from kernel stack + move.4 d5, PT_D5(sp) ; Restore d5 from kernel stack + move.4 d8, PT_D8(sp) ; Restore d8 from kernel stack + move.4 d10, PT_D10(sp) ; Restore d10 from kernel stack + move.4 d11, PT_D11(sp) ; Restore d11 from kernel stack + move.4 d12, PT_D12(sp) ; Restore d12 from kernel stack + move.4 d13, PT_D13(sp) ; Restore d13 from kernel stack + move.4 a1, PT_A1(sp) ; Restore A1 from kernel stack + move.4 a2, PT_A2(sp) ; Restore A2 from kernel stack + move.4 a5, PT_A5(sp) ; Restore A5 from kernel stack + move.4 a6, PT_A6(sp) ; Restore A6 from kernel stack + move.4 a0, PT_A0(sp) ; Restore A6 from kernel stack + + /* + * this is only for debug, and could be removed for production builds + */ + move.4 PT_FRAME_TYPE(sp), #0 ; invalidate frame_type + +#ifdef CONFIG_PROTECT_KERNEL + + call a4, __syscall_exit_bottom_half + + .section .kernel_unprotected, "ax", @progbits +__syscall_exit_bottom_half: + /* + * Enter critical section + */ + atomic_lock_acquire + disable_kernel_ranges_for_current d15 +#endif + /* + * Lastly restore userspace stack ptr + * + * Note: that when protection is on we need to hold the lock around the + * stack swap as well because otherwise the protection could get + * inadvertently disabled again at the end of a context switch. + */ + move.4 a7, PT_A7(sp) ; Restore A7 from kernel stack + + /* + * We are now officially back in userspace! + */ + +#ifdef CONFIG_PROTECT_KERNEL + /* + * Leave critical section and return to user space. + */ + atomic_lock_release +#endif + calli a5, 0(a5) ; Back to userspace code. + + bkpt #-1 ; we will never get here + + /* + * Post syscall processing. (unlikely part of syscall_exit) + * + * Are we tracing syscalls. If TIF_SYSCALL_TRACE is set, call + * syscall_trace routine and return here. + */ + .section .text.syscall_exit, "ax", @progbits +.Lsyscall_exit__post_processing: + btst TI_FLAGS(a1), #ASM_TIF_SYSCALL_TRACE + jmpeq.t 1f + call a5, syscall_trace + + /* + * Do we need to resched ie call schedule. If TIF_NEED_RESCHED is set, + * call the scheduler, it will come back here. + */ +1: btst TI_FLAGS(a1), #ASM_TIF_NEED_RESCHED + jmpeq.t 2f + call a5, schedule + + /* + * Do we need to post a signal, if TIF_SIGPENDING is set call the + * do_signal. + */ +2: btst TI_FLAGS(a1), #ASM_TIF_SIGPENDING + jmpeq.t .Lsyscall_exit__post_processing_complete + + /* + * setup the do signal call + */ + move.4 d0, #0 ; oldset pointer is NULL + lea.1 d1, (sp) ; d1 is the regs pointer. + call a5, do_signal + + jmpt.t .Lsyscall_exit__post_processing_complete + +/* .size syscall_exit, . - syscall_exit */ + +/* + * kernel_execve() + * kernel_execv is called when we the kernel is starting a + * userspace application. + */ + .section .kernel_unprotected, "ax", @progbits + .global kernel_execve +kernel_execve: + move.4 -4(sp)++, a5 ; Save return address + /* + * Call execve + */ + movei d8, #__NR_execve ; call execve + call a5, system_call + move.4 a5, (sp)4++ + + /* + * protection was enabled again at syscall exit, but we want + * to return to kernel so we enable it again. + */ +#ifdef CONFIG_PROTECT_KERNEL + /* + * We are entering the kernel so we need to disable the protection. + * Enter critical section, disable ranges and leave critical section. + */ + call a3, __enable_kernel_ranges ; and jump back to kernel +#else + ret a5 ; jump back to the kernel +#endif + + .size kernel_execve, . - kernel_execve + +/* + * signal_trampoline() + * + * Deals with transitioning from to userspace signal handlers and returning + * to userspace, only called from the kernel. + * + */ + .section .kernel_unprotected, "ax", @progbits + .global signal_trampoline +signal_trampoline: + /* + * signal_trampoline is called when we are jumping from the kernel to + * the userspace signal handler. + * + * The following registers are relevant. (set setup_rt_frame) + * sp is the user space stack not the kernel stack + * d0 = signal number + * d1 = siginfo_t * + * d2 = ucontext * + * d3 = the user space signal handler + * a0 is set to the GOT if userspace application is FDPIC, otherwise 0 + * a3 is set to the FD for the signal if userspace application is FDPIC + */ +#ifdef CONFIG_PROTECT_KERNEL + /* + * We are leaving the kernel so we need to enable the protection. + * Enter critical section, disable ranges and leave critical section. + */ + atomic_lock_acquire ; Enter critical section + disable_kernel_ranges_for_current d15 ; disable kernel ranges + atomic_lock_release ; Leave critical section +#endif + /* + * The signal handler pointer is in register d3 so tranfer it to a4 and + * call it + */ + movea a4, d3 ; signal handler + calli a5, 0(a4) + + /* + * Return to userspace through rt_syscall which is stored on top of the + * stack d1 contains ret_via_interrupt status. + */ + move.4 d8, (sp) ; d8 (syscall #) = rt_syscall + move.4 d1, 4(sp) ; d1 = ret_via_interrupt + call a5, system_call ; as we are 'in' the kernel + ; we can call kernel_syscall + + bkpt #-1 ; will never get here. + .size signal_trampoline, . - signal_trampoline + +/* + * kernel_thread_helper() + * + * Entry point for kernel threads (only referenced by kernel_thread()). + * + * On execution d0 will be 0, d1 will be the argument to be passed to the + * kernel function. + * d2 contains the kernel function that needs to get called. + * d3 will contain address to do_exit which needs to get moved into a5. + * + * On return from fork the child thread d0 will be 0. We call this dummy + * function which in turn loads the argument + */ + .section .kernel_unprotected, "ax", @progbits + .global kernel_thread_helper +kernel_thread_helper: + /* + * Create a kernel thread. This is called from ret_from_vfork (a + * userspace return routine) so we need to put it in an unprotected + * section and re-enable protection before calling the vector in d2. + */ + +#ifdef CONFIG_PROTECT_KERNEL + /* + * We are entering the kernel so we need to disable the protection. + * Enter critical section, disable ranges and leave critical section. + */ + call a5, __enable_kernel_ranges +#endif + /* + * Move argument for kernel function into d0, and set a5 return address + * (a5) to do_exit and return through a2 + */ + move.4 d0, d1 ; d0 = arg + move.4 a5, d3 ; a5 = do_exit + ret d2 ; call function ptr in d2 + .size kernel_thread_helper, . - kernel_thread_helper + +#ifdef CONFIG_PROTECT_KERNEL + .section .kernel_unprotected, "ax", @progbits +__enable_kernel_ranges: + atomic_lock_acquire ; Enter critical section + enable_kernel_ranges_for_current d15 + atomic_lock_release ; Leave critical section + calli a5, 0(a5) + .size __enable_kernel_ranges, . - __enable_kernel_ranges + +#endif + +/* + * The following system call intercept functions where we setup the + * input to the real system call. In all cases these are just taking + * the current sp which is pointing to pt_regs and pushing it into the + * last arg of the system call. + * + * i.e. the public definition of sys_execv is + * sys_execve( char *name, + * char **argv, + * char **envp ) + * but process.c defines it as + * sys_execve( char *name, + * char **argv, + * char **envp, + * struct pt_regs *regs ) + * + * so execve_intercept needs to populate the 4th arg with pt_regs*, + * which is the stack pointer as we know we must be coming out of + * system_call + * + * The intercept vectors are referenced by syscalltable.S + */ + +/* + * execve_intercept() + */ + .section .text.execve_intercept, "ax", @progbits + .global execve_intercept +execve_intercept: + move.4 d3, sp ; Save pt_regs address + call a3, sys_execve + + .size execve_intercept, . - execve_intercept + +/* + * vfork_intercept() + */ + .section .text.vfork_intercept, "ax", @progbits + .global vfork_intercept +vfork_intercept: + move.4 d0, sp ; Save pt_regs address + call a3, sys_vfork + + .size vfork_intercept, . - vfork_intercept + +/* + * clone_intercept() + */ + .section .text.clone_intercept, "ax", @progbits + .global clone_intercept +clone_intercept: + move.4 d2, sp ; Save pt_regs address + call a3, sys_clone + + .size clone_intercept, . - clone_intercept + +/* + * sys_sigsuspend() + */ + .section .text.sigclone_intercept, "ax", @progbits + .global sys_sigsuspend +sys_sigsuspend: + move.4 d0, sp ; Pass pointer to pt_regs in d0 + call a3, do_sigsuspend + + .size sys_sigsuspend, . - sys_sigsuspend + +/* + * sys_rt_sigsuspend() + */ + .section .text.sys_rt_sigsuspend, "ax", @progbits + .global sys_rt_sigsuspend +sys_rt_sigsuspend: + move.4 d0, sp ; Pass pointer to pt_regs in d0 + call a3, do_rt_sigsuspend + + .size sys_rt_sigsuspend, . - sys_rt_sigsuspend + +/* + * sys_rt_sigreturn() + */ + .section .text.sys_rt_sigreturn, "ax", @progbits + .global sys_rt_sigreturn +sys_rt_sigreturn: + move.4 d0, sp ; Pass pointer to pt_regs in d0 + call a3, do_rt_sigreturn + + .size sys_rt_sigreturn, . - sys_rt_sigreturn + +/* + * sys_sigaltstack() + */ + .section .text.sys_sigaltstack, "ax", @progbits + .global sys_sigaltstack +sys_sigaltstack: + move.4 d0, sp ; Pass pointer to pt_regs in d0 + call a3, do_sys_sigaltstack + + .size sys_sigaltstack, . - sys_sigaltstack diff --git a/target/linux/ubicom32/files/arch/ubicom32/kernel/unaligned_trap.c b/target/linux/ubicom32/files/arch/ubicom32/kernel/unaligned_trap.c new file mode 100644 index 0000000000..d856d061dc --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/kernel/unaligned_trap.c @@ -0,0 +1,698 @@ +/* + * arch/ubicom32/kernel/unaligned_trap.c + * Handle unaligned traps in both user or kernel space. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ + +#include <linux/types.h> +#include <linux/kernel.h> +#include <asm/cacheflush.h> +#include <asm/traps.h> + +#define FALSE 0 +#define TRUE 1 + +/* no possible trap */ +#define UNUSED 0 +/* possible source operand trap */ +#define SRC 1 +#define SRC_2 2 +/* possible destination operand trap */ +#define DEST 3 +#define DEST_2 4 +/* can be either source or destination or both */ +#define TWO_OP 5 +#define TWO_OP_2 6 + +/* TODO: What is the real value here, put something in to make it compile for + * now */ +#define MOVE_2 0x0d +#define LSL_2 0x11 +#define LSR_2 0x13 +#define MOVEI 0x19 +#define CMPI 0x18 + +static int op_format[32] = +{ + TWO_OP, /* 0x00 */ + UNUSED, + SRC, + UNUSED, + TWO_OP, /* 0x04 */ + TWO_OP, + SRC, + UNUSED, + TWO_OP_2, /* 0x08 */ + TWO_OP, + TWO_OP_2, + TWO_OP, + TWO_OP_2, /* 0x0C */ + TWO_OP, + TWO_OP_2, + TWO_OP, + TWO_OP, /* 0x10 */ + TWO_OP_2, + TWO_OP, + TWO_OP, + UNUSED, /* 0x14 */ + UNUSED, + UNUSED, + UNUSED, + SRC_2, /* 0x18 */ + DEST_2, + UNUSED, + UNUSED, + UNUSED, /* 0x1C */ + UNUSED, + UNUSED, /* unaligned CALLI will not be fixed. */ + UNUSED +}; + +static int op_0_format[32] = +{ + UNUSED, /* 0x00 */ + UNUSED, + UNUSED, + UNUSED, + UNUSED, /* 0x04 - ret don't fix - bad ret is always wrong */ + UNUSED, + UNUSED, + UNUSED, + UNUSED, /* 0x08 */ + UNUSED, + TWO_OP, + TWO_OP_2, + TWO_OP, /* 0x0c */ + TWO_OP_2, + TWO_OP, + UNUSED, /* .1 can't trap */ + UNUSED, /* 0x10 */ + UNUSED, + SRC, + UNUSED, + UNUSED, /* 0x14 */ + TWO_OP_2, + UNUSED, + UNUSED, + UNUSED, /* 0x18 */ + UNUSED, + UNUSED, + UNUSED, + DEST, /* 0x1c */ + DEST, + DEST, + DEST, /* all lea have 32-bit destination */ +}; + +static int op_2_format[32] = +{ + UNUSED, /* 0x00 */ + UNUSED, + UNUSED, + UNUSED, + UNUSED, /* 0x04 */ + UNUSED, + SRC, + UNUSED, + UNUSED, /* 0x08 crcgen is .1 */ + UNUSED, + UNUSED, + UNUSED, + UNUSED, /* 0x0c */ + UNUSED, + UNUSED, + UNUSED, + SRC, /* 0x10 */ + SRC_2, + SRC, + SRC_2, + SRC, /* 0x14 */ + SRC_2, + SRC, + UNUSED, + UNUSED, /* 0x18 */ + UNUSED, + SRC, + UNUSED, + SRC, /* 0x1c */ + UNUSED, + SRC_2, + UNUSED, +}; + +static int op_6_format[32] = +{ + SRC_2, /* 0x00 */ + SRC_2, + SRC_2, + SRC_2, + SRC_2, /* 0x04 */ + SRC_2, + UNUSED, + SRC_2, + SRC, /* 0x08 MULS.4 */ + SRC_2, + SRC, + UNUSED, + UNUSED, /* 0x0c */ + UNUSED, + UNUSED, + UNUSED, + SRC, /* 0x10 */ + SRC_2, + SRC, + SRC_2, + UNUSED, /* 0x14 */ + UNUSED, + UNUSED, + UNUSED, + UNUSED, /* 0x18 */ + UNUSED, + UNUSED, + UNUSED, + UNUSED, /* 0x1c */ + UNUSED, + UNUSED, + UNUSED, +}; + +/* + * unaligned_get_address() + * get an address using save_an and save_dn registers, and updates save_an + * with side effects + */ +unsigned char *unaligned_get_address(int thread, int specifier, int four_byte, + unsigned int save_an[], + unsigned int save_dn[], int *write_back_an) +{ + unsigned char *address; + + int areg = (specifier >> 5) & 7; + if ((specifier >> 8) == 2) { + int offset = specifier & 0xf; + offset = ((offset << 28) >> 28); + if (likely(four_byte)) { + offset <<= 2; + } else { + offset <<= 1; + } + if (specifier & 0x10) { + address = (unsigned char *)(save_an[areg] + offset); + } else { + address = (unsigned char *)save_an[areg]; + } + save_an[areg] = save_an[areg] + offset; + + /* + * Let caller know An registers have been modified. + */ + *write_back_an = 1; + } else if ((specifier >> 8) == 3) { + int dreg = specifier & 0xf; + if (likely(four_byte)) { + address = (unsigned char *)(save_an[areg] + + (save_dn[dreg] << 2)); + } else { + address = (unsigned char *)(save_an[areg] + + (save_dn[dreg] << 1)); + } + } else { + int offset = ((specifier >> 3) & 0x60) | (specifier & 0x1f); + if (likely(four_byte)) { + address = (unsigned char *)(save_an[areg] + + (offset << 2)); + } else { + address = (unsigned char *)(save_an[areg] + + (offset << 1)); + } + } + + return address; +} + +static int save_dn[16]; +static int save_an[8]; +static int save_acc[5]; + +/* + * unaligned_emulate() + * emulate the instruction at thread's pc that has taken an unaligned data + * trap. + * + * source or destination or both might be unaligned + * the instruction must have a memory source or destination or both + * the emulated instruction is copied and executed in this thread + * + * TODO: Protection is handled outside of this function + * TODO: handling simultaneous unaligned and memory protection traps + * + * Get thread state + * the PC and instruction (and local copy, emulate_inst), and An + * and Dn registers + * All implicit soruce state (source3, CSR, accumulators) + + * if the instruction has a memory source + * Use the instruction, An and Dn registers to form src_address + * get unaligned source data from src_address (usually sign + * extended) + * (2 bytes, with or without sign extension, or 4 bytes) + * modify emulate_inst to use d0 as source + * else + * get the soure operand from one of thread's registers + * if instruction has a memory destination + * Use the instruction, An and Dn registers to form dest_address + * modify emulate_inst to use d0 as destination + * if there was a memory source + * put the source data in thread's d0 + * get the source-2 Dn operand and source 3 operand from thread + * execute modified inst + * (save it, flush caches, set up local values for implicit + * sources, execute, save explicit and implicit results) + * if inst has destination address + * copy result to dest_address, possibly unaligned, 1, 2, or 4 + * bytes + * restore thread's implicit results (modified address registers, CSR, + * accumulators) add 4 to thread's pc + */ +void unaligned_emulate(unsigned int thread) +{ + unsigned int pc; + unsigned int inst; + unsigned int op; + unsigned int subop; + int format; + unsigned int emulate_inst; + int four_byte; + int src_operand, dest_operand; + int save_csr; + int source3; + unsigned int source1; + unsigned int source_data; + unsigned char *dest_address = NULL; + int source2 = 0; + unsigned int result; + unsigned int write_back_an = 0; + unsigned int chip_id_copy; + + extern unsigned int trap_emulate; + extern unsigned int ubicom32_emulate_insn(int source1, int source2, + int source3, int *save_acc, + int *save_csr); + + /* + * get the chip_id + */ + asm volatile ( + " move.4 %0, chip_id \n\t" /* get chip_id. */ + : "=r"(chip_id_copy) + : + ); + + /* + * get the pc + */ + asm volatile ( + " move.4 CSR, %1 \n\t" /* set source thread in + * CSR */ + " setcsr_flush 0 \n\t" + " move.4 %0, pc \n\t" + " move.4 CSR, #0 \n\t" /* restore CSR */ + " setcsr_flush 0 \n\t" + : "=a"(pc) + : "d" ((1 << 8) | (thread << 9)) + : "cc" + ); + + inst = *((unsigned int *)pc); + op = inst >> 27; + if (unlikely(op == 2 || op == 6)) { + subop = (inst >> 21) & 0x1f; + } else { + subop = (inst >> 11) & 0x1f; + } + format = op_format[op]; + emulate_inst = inst; + + if (op == 0) { + format = op_0_format[subop]; + } else if (op == 2) { + format = op_2_format[subop]; + } else if (op == 6) { + format = op_6_format[subop]; + } + + if (unlikely(format == UNUSED)) { + /* + * We are not going to emulate this. Bump PC by 4 and move on. + */ + asm volatile ( + " move.4 CSR, %0 \n\t" + " setcsr_flush 0 \n\t" + " move.4 pc, %1 \n\t" + " setcsr #0 \n\t" + " setcsr_flush 0 \n\t" + : + : "d"((1 << 14) | (thread << 15)), "d"(pc + 4) + : "cc" + ); + return; + } + + four_byte = (format == TWO_OP || format == DEST || format == SRC); + + /* + * source or destination memory operand needs emulation + */ + src_operand = (format == SRC || + format == SRC_2 || + format == TWO_OP || + format == TWO_OP_2) && + ((inst >> 8) & 7) > 1; + + dest_operand = (format == DEST || + format == DEST_2 || + format == TWO_OP || + format == TWO_OP_2) && + ((inst >> 24) & 7) > 1; + + /* + * get thread's implicit sources (not covered by source context select). + * data and address registers and CSR (for flag bits) and src3 and + * accumulators + */ + asm volatile ( + " move.4 CSR, %2 \n\t" /* set source thread in + * CSR */ + " setcsr_flush 0 \n\t" + " move.4 (%3), d0 \n\t" /* get dn registers */ + " move.4 4(%3), d1 \n\t" + " move.4 8(%3), d2 \n\t" + " move.4 12(%3), d3 \n\t" + " move.4 16(%3), d4 \n\t" + " move.4 20(%3), d5 \n\t" + " move.4 24(%3), d6 \n\t" + " move.4 28(%3), d7 \n\t" + " move.4 32(%3), d8 \n\t" + " move.4 36(%3), d9 \n\t" + " move.4 40(%3), d10 \n\t" + " move.4 44(%3), d11 \n\t" + " move.4 48(%3), d12 \n\t" + " move.4 52(%3), d13 \n\t" + " move.4 56(%3), d14 \n\t" + " move.4 60(%3), d15 \n\t" + " move.4 (%4), a0 \n\t" /* get an registers */ + " move.4 4(%4), a1 \n\t" + " move.4 8(%4), a2 \n\t" + " move.4 12(%4), a3 \n\t" + " move.4 16(%4), a4 \n\t" + " move.4 20(%4), a5 \n\t" + " move.4 24(%4), a6 \n\t" + " move.4 28(%4), a7 \n\t" + " move.4 %0, CSR \n\t" /* get csr and source3 + * implicit operands */ + " move.4 %1, source3 \n\t" + " move.4 (%5), acc0_lo \n\t" /* get accumulators */ + " move.4 4(%5), acc0_hi \n\t" + " move.4 8(%5), acc1_lo \n\t" + " move.4 12(%5), acc1_hi \n\t" + " move.4 16(%5), mac_rc16 \n\t" + " move.4 CSR, #0 \n\t" /* restore CSR */ + " setcsr_flush 0 \n\t" + : "=m"(save_csr), "=m"(source3) + : "d"((1 << 8) | (thread << 9)), + "a"(save_dn), "a"(save_an), "a"(save_acc) + : "cc" + ); + + /* + * turn off thread select bits if they were on + */ + BUG_ON((save_csr & 0x04100) != 0); + if (unlikely(save_csr & 0x04100)) { + /* + * Things are in funny state as thread select bits are on in + * csr. PANIC. + */ + panic("In unaligned trap handler. Trap thread CSR has thread " + "select bits on.\n"); + } + + save_csr = save_csr & 0x1000ff; + + /* + * get the source1 operand + */ + source1 = 0; + if (src_operand) { + unsigned char *src_address; + + /* + * source1 comes from memory + */ + BUG_ON(!(format == TWO_OP || format == TWO_OP_2 || + format == SRC || format == SRC_2)); + src_address = unaligned_get_address(thread, inst & 0x7ff, + four_byte, save_an, + save_dn, &write_back_an); + + /* + * get data (possibly unaligned) + */ + if (likely(four_byte)) { + source_data = (*src_address << 24) | + (*(src_address + 1) << 16) | + (*(src_address + 2) << 8) | + *(src_address + 3); + source1 = source_data; + } else { + source1 = *src_address << 8 | + *(src_address + 1); + + /* + * Source is not extended if the instrution is MOVE.2 or + * if the cpu CHIP_ID >= 0x30000 and the instruction is + * either LSL.2 or LSR.2. All other cases have to be + * sign extended. + */ + if ((!(op == 2 && subop == MOVE_2)) && + (!((chip_id_copy >= 0x30000) && + (subop == LSL_2 || subop == LSR_2)))) { + /* + * Have to sign extend the .2 entry. + */ + source1 = ((unsigned int) + ((signed int) + ((signed short) source1))); + } + } + } else if (likely(op != MOVEI)) { + /* + * source1 comes from a register, using move.4 d0, src1 + * unaligned_emulate_get_source is pointer to code to insert remulated instruction + */ + extern unsigned int unaligned_emulate_get_src; + *((int *)&unaligned_emulate_get_src) &= ~(0x7ff); + *((int *)&unaligned_emulate_get_src) |= (inst & 0x7ff); + flush_dcache_range((unsigned long)(&unaligned_emulate_get_src), + (unsigned long)(&unaligned_emulate_get_src) + 4); + + asm volatile ( + /* source1 uses thread's registers */ + " move.4 CSR, %1 \n\t" + " setcsr_flush 0 \n\t" + "unaligned_emulate_get_src: \n\t" + " move.4 %0, #0 \n\t" + " setcsr #0 \n\t" + " setcsr_flush 0 \n\t" + : "=d" (source1) + : "d" ((1 << 8) | (thread << 9)) + : "cc" + ); + } + + /* + * get the destination address + */ + if (dest_operand) { + BUG_ON(!(format == TWO_OP || format == TWO_OP_2 || + format == DEST || format == DEST_2)); + dest_address = unaligned_get_address(thread, + ((inst >> 16) & 0x7ff), + four_byte, save_an, + save_dn, &write_back_an); + } + + if (write_back_an) { + /* + * restore any modified An registers + */ + asm volatile ( + " move.4 CSR, %0 \n\t" + " setcsr_flush 0 \n\t" + " move.4 a0, (%1) \n\t" + " move.4 a1, 4(%1) \n\t" + " move.4 a2, 8(%1) \n\t" + " move.4 a3, 12(%1) \n\t" + " move.4 a4, 16(%1) \n\t" + " move.4 a5, 20(%1) \n\t" + " move.4 a6, 24(%1) \n\t" + " move.4 a7, 28(%1) \n\t" + " setcsr #0 \n\t" + " setcsr_flush 0 \n\t" + : + : "d" ((1 << 14) | (thread << 15)), "a" (save_an) + : "cc" + ); + } + + /* + * get source 2 register if needed, and modify inst to use d1 for + * source-2 source-2 will come from this thread, not the trapping thread + */ + source2 = 0; + if ((op >= 8 && op <= 0x17) || + ((op == 2 || op == 6) && (inst & 0x4000000))) { + int src_dn = (inst >> 11) & 0xf; + source2 = save_dn[src_dn]; + /* + * force the emulated instruction to use d1 for source2 operand + */ + emulate_inst = (emulate_inst & 0xffff07ff) | 0x800; + } + + if (likely(op != MOVEI)) { + /* + * change emulated instruction source1 to d0 + */ + emulate_inst &= ~0x7ff; + emulate_inst |= 1 << 8; + } + + if (unlikely(op == 6 || op == 2)) { + /* + * Set destination to d0 + */ + emulate_inst &= ~(0xf << 16); + } else if (likely(op != CMPI)) { + /* + * Set general destination field to d0. + */ + emulate_inst &= ~(0x7ff << 16); + emulate_inst |= 1 << 24; + } + + /* + * execute emulated instruction d0, to d0, no memory access + * source2 if needed will be in d1 + * source3, CSR, and accumulators are set up before execution + */ + *((unsigned int *)&trap_emulate) = emulate_inst; + flush_dcache_range((unsigned long)(&trap_emulate), + (unsigned long)(&trap_emulate) + 4); + + result = ubicom32_emulate_insn(source1, source2, source3, + save_acc, &save_csr); + + /* + * set the result value + */ + if (dest_operand) { + /* + * copy result to memory + */ + if (four_byte) { + *dest_address++ = + (unsigned char)((result >> 24) & 0xff); + *dest_address++ = + (unsigned char)((result >> 16) & 0xff); + } + *dest_address++ = (unsigned char)((result >> 8) & 0xff); + *dest_address = (unsigned char)(result & 0xff); + } else if (likely(op != CMPI)) { + /* + * copy result to a register, using move.4 dest, result + */ + extern unsigned int unaligned_trap_set_result; + *((unsigned int *)&unaligned_trap_set_result) &= ~0x7ff0000; + + if (op == 2 || op == 6) { + *((unsigned int *)&unaligned_trap_set_result) |= + ((inst & 0x000f0000) | 0x01000000); + } else { + *((unsigned int *)&unaligned_trap_set_result) |= + (inst & 0x7ff0000); + } + flush_dcache_range((unsigned long)&unaligned_trap_set_result, + ((unsigned long)(&unaligned_trap_set_result) + 4)); + + asm volatile ( + /* result uses thread's registers */ + " move.4 CSR, %1 \n\t" + " setcsr_flush 0 \n\t" + "unaligned_trap_set_result: \n\t" + " move.4 #0, %0 \n\t" + " setcsr #0 \n\t" + " setcsr_flush 0 \n\t" + : + : "d"(result), "d" ((1 << 14) | (thread << 15)) + : "cc" + ); + } + + /* + * bump PC in thread and restore implicit register changes + */ + asm volatile ( + " move.4 CSR, %0 \n\t" + " setcsr_flush 0 \n\t" + " move.4 pc, %1 \n\t" + " move.4 acc0_lo, (%3) \n\t" + " move.4 acc0_hi, 4(%3) \n\t" + " move.4 acc1_lo, 8(%3) \n\t" + " move.4 acc1_hi, 12(%3) \n\t" + " move.4 mac_rc16, 16(%3) \n\t" + " move.4 CSR, %2 \n\t" + " setcsr #0 \n\t" + " setcsr_flush 0 \n\t" + : + : "d"((1 << 14) | (thread << 15)), + "d"(pc + 4), "d"(save_csr), "a"(save_acc) + : "cc" + ); +} + +/* + * unaligned_only() + * Return true if either of the unaligned causes are set (and no others). + */ +int unaligned_only(unsigned int cause) +{ + unsigned int unaligned_cause_mask = + (1 << TRAP_CAUSE_DST_MISALIGNED) | + (1 << TRAP_CAUSE_SRC1_MISALIGNED); + + BUG_ON(cause == 0); + return (cause & unaligned_cause_mask) == cause; +} diff --git a/target/linux/ubicom32/files/arch/ubicom32/kernel/vmlinux.lds.S b/target/linux/ubicom32/files/arch/ubicom32/kernel/vmlinux.lds.S new file mode 100644 index 0000000000..cd646772cf --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/kernel/vmlinux.lds.S @@ -0,0 +1,370 @@ +/* + * arch/ubicom32/kernel/vmlinux.lds.S + * vmlinux primary linker script + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#include <asm-generic/vmlinux.lds.h> +#include <asm/ocm_size.h> +#include <asm/memory_map.h> +#include <asm/thread_info.h> +#include <linux/threads.h> + +/* + * Sanity checks to prevent errors later on that are much harder to understand + */ +#if !defined APP_OCM_CODE_SIZE +#error APP_OCM_CODE_SIZE has not been defined in ocm_size.h +#endif + +#if !defined APP_OCM_DATA_SIZE +#error APP_OCM_DATA_SIZE has not been defined in ocm_size.h +#endif + +/* + * The `free' ocm area that ultra does not use. + */ +#if APP_OCM_CODE_SIZE || APP_OCM_DATA_SIZE +#define OCM_FREE_START (OCMSTART + APP_OCM_CODE_SIZE) +#define OCM_FREE_LENGTH (OCMSIZE - APP_OCM_CODE_SIZE - APP_OCM_DATA_SIZE) +#else +#define OCM_FREE_START OCMEND +#define OCM_FREE_LENGTH 0 +#endif + +/* + * If you want to limit OCM use for text/data or completely disable it + * you can change these values. + */ +#define OCM_TEXT_LENGTH OCM_FREE_LENGTH +#define OCM_DATA_LENGTH OCM_FREE_LENGTH + +#define RAM_START KERNELSTART +#define RAM_LENGTH ((SDRAMSTART + CONFIG_MIN_RAMSIZE) - RAM_START) +#define TEXT ram +#define DATA ram +#define INIT ram +#define BSS ram + +#ifndef DATA_ADDR +#define DATA_ADDR +#endif + +#include <asm-generic/vmlinux.lds.h> + +OUTPUT_ARCH(ubicom32) +ENTRY(_start) + +MEMORY { + ram : ORIGIN = RAM_START, LENGTH = RAM_LENGTH + syscall : ORIGIN = OS_SYSCALL_BEGIN, LENGTH = (OS_SYSCALL_END - OS_SYSCALL_BEGIN) + ocm : ORIGIN = OCM_FREE_START, LENGTH = OCM_FREE_LENGTH +} + +jiffies = jiffies_64 + 4; + +/* + * Fixed locations required by gdb coredumps. + * + * Note that the names are what gdb is expecting so renaming will break + * the toolchain. + */ +__ocm_begin = OCMSTART; +__ocm_limit = __ocm_begin + OCMSIZE; +__sdram_begin = SDRAMSTART; +__sdram_limit = __sdram_begin + CONFIG_MIN_RAMSIZE; +__filemedia_begin_addr = FLASHSTART; +__filemedia_end_addr = __filemedia_begin_addr + 0x00800000; + +/* + * For internal diagnostics + */ +__os_syscall_begin = OS_SYSCALL_BEGIN; +__os_syscall_end = OS_SYSCALL_END; + +SECTIONS { + + .fixed_text : { + _begin = .; + *(.skip_syscall) + *(.old_syscall_entry.text) + __fixed_text_end = .; + } > TEXT + . = _begin + SIZEOF(.fixed_text) ; + + /* + * System call text in lower ocm (fixed location, can never change) + */ + __syscall_text_load_begin = .; + __syscall_text_run_begin = OS_SYSCALL_BEGIN; + + .syscall_text __syscall_text_run_begin : AT(__syscall_text_load_begin) { + *(.syscall_entry.text) /* Must be at OS_SYSCALL_BEGIN 0x3ffc0040 */ + *(.kernel_unprotected) + . = ALIGN(4); + __syscall_text_run_end = .; + } > syscall /* .syscall_text */ + . = __syscall_text_load_begin + __syscall_text_run_end - __syscall_text_run_begin ; + __ocm_text_load_begin = .; + __ocm_text_run_begin = OCM_FREE_START ; + .ocm_text __ocm_text_run_begin : AT(__ocm_text_load_begin) { +#if OCM_TEXT_LENGTH + *(.ocm_text) + *(.sched.text) + *(.spinlock.text) +#include <asm/ocm_text.lds.inc> + . = ALIGN(4); +#endif + __ocm_text_run_end = .; + __data_begin = ALIGN(OCM_SECTOR_SIZE); + } > ocm /* .ocm_text */ + + .ocm_module_text __ocm_text_run_end (NOLOAD) : AT(__ocm_text_run_end) { + __ocm_inst_heap_begin = .; + /* Reserve the min requested */ + . += (CONFIG_OCM_MODULES_RESERVATION) * 1024; +#ifdef CONFIG_OCM_MODULES_MAY_CONSUME_REMAINING_CODESPACE + /* Round up to OCM sector size (we cannot use it for data) */ + . = ALIGN(OCM_SECTOR_SIZE); +#endif + __ocm_inst_heap_end = .; + /* update __data_begin */ + __data_begin = ALIGN(OCM_SECTOR_SIZE); + } > ocm /* .ocm_module_text */ + + . = __ocm_text_load_begin + __ocm_text_run_end - __ocm_text_run_begin ; + __ocm_text_load_end = .; + + __ocm_data_load_begin = .; + __ocm_data_run_begin = __data_begin ; +#if OCM_DATA_LENGTH + .ocm_data __ocm_data_run_begin : AT(__ocm_data_load_begin) { +#if defined(CONFIG_IRQSTACKS_USEOCM) + percpu_irq_stacks = .; + . += NR_CPUS * THREAD_SIZE; +#endif + *(.ocm_data) + . = ALIGN(4) ; + __ocm_data_run_end = .; + } > ocm + . = __ocm_data_load_begin + __ocm_data_run_end - __ocm_data_run_begin ; +#else + __ocm_data_run_end = __ocm_data_run_begin; +#endif + __ocm_data_load_end = .; + + __ocm_free_begin = __ocm_data_run_end; + __ocm_free_end = OCM_FREE_START + OCM_FREE_LENGTH; + + .text __ocm_data_load_end : AT(__ocm_data_load_end) { + . = ALIGN(4); + _stext = .; + _text = .; + TEXT_TEXT + SCHED_TEXT + LOCK_TEXT + *(.text.lock) + *(.text.__libgcc_udivmodsi) + *(.text.__libgcc_divmodsi) + *(.text.__libgcc_muldi3) + *(.text.__libgcc_udivmoddi) + *(.text.__libgcc_divmoddi) + *(.text.*) +#if OCM_TEXT_LENGTH == 0 + *(.ocm_text) + *(.sched.text) + *(.spinlock.text) +#endif + . = ALIGN(16); /* Exception table */ + __start___ex_table = .; + *(__ex_table) + __stop___ex_table = .; + + *(.rodata) *(.rodata.*) + *(__vermagic) /* Kernel version magic */ + *(__markers_strings) + *(.rodata1) + *(.rodata.str1.1) + *(__tracepoints_strings) + + /* PCI quirks */ + __start_pci_fixups_early = . ; + *(.pci_fixup_early) + __end_pci_fixups_early = . ; + __start_pci_fixups_header = . ; + *(.pci_fixup_header) + __end_pci_fixups_header = . ; + __start_pci_fixups_final = . ; + *(.pci_fixup_final) + __end_pci_fixups_final = . ; + __start_pci_fixups_enable = . ; + *(.pci_fixup_enable) + __end_pci_fixups_enable = . ; + __start_pci_fixups_resume = . ; + *(.pci_fixup_resume) + __end_pci_fixups_resume = . ; + __start_pci_fixups_resume_early = . ; + *(.pci_fixup_resume_early) + __end_pci_fixups_resume_early = . ; + __start_pci_fixups_suspend = . ; + *(.pci_fixup_suspend) + __end_pci_fixups_suspend = . ; + + __start_builtin_fw = . ; + *(.builtin_fw) + __end_builtin_fw = . ; + + + /* Kernel symbol table: Normal symbols */ + . = ALIGN(4); + __start___ksymtab = .; + *(__ksymtab) + __stop___ksymtab = .; + + /* Kernel symbol table: GPL-only symbols */ + __start___ksymtab_gpl = .; + *(__ksymtab_gpl) + __stop___ksymtab_gpl = .; + + /* Kernel symbol table: Normal unused symbols */ + __start___ksymtab_unused = .; + *(__ksymtab_unused) + __stop___ksymtab_unused = .; + + /* Kernel symbol table: GPL-only unused symbols */ + __start___ksymtab_unused_gpl = .; + *(__ksymtab_unused_gpl) + __stop___ksymtab_unused_gpl = .; + + /* Kernel symbol table: GPL-future symbols */ + __start___ksymtab_gpl_future = .; + *(__ksymtab_gpl_future) + __stop___ksymtab_gpl_future = .; + + /* Kernel symbol table: Normal symbols */ + __start___kcrctab = .; + *(__kcrctab) + __stop___kcrctab = .; + + /* Kernel symbol table: GPL-only symbols */ + __start___kcrctab_gpl = .; + *(__kcrctab_gpl) + __stop___kcrctab_gpl = .; + + /* Kernel symbol table: GPL-future symbols */ + __start___kcrctab_gpl_future = .; + *(__kcrctab_gpl_future) + __stop___kcrctab_gpl_future = .; + + /* Kernel symbol table: strings */ + *(__ksymtab_strings) + + /* Built-in module parameters */ + . = ALIGN(4) ; + __start___param = .; + *(__param) + __stop___param = .; + + . = ALIGN(4) ; + _etext = . ; + } > TEXT + + .data DATA_ADDR : { + . = ALIGN(4); + _sdata = . ; + DATA_DATA +#if OCM_DATA_LENGTH == 0 + *(.ocm_data) +#endif + . = ALIGN(8192) ; + _data_protection_end = .; + *(.data.init_task) + . = ALIGN(4); + _edata = . ; + } > DATA + + .init : { + . = ALIGN(4096); + __init_begin = .; + _sinittext = .; + INIT_TEXT + _einittext = .; + *(.init.rodata) + INIT_DATA + . = ALIGN(16); + __setup_start = .; + *(.init.setup) + __setup_end = .; + __initcall_start = .; + INITCALLS + __initcall_end = .; + __con_initcall_start = .; + *(.con_initcall.init) + __con_initcall_end = .; + ___security_initcall_start = .; + *(.security_initcall.init) + ___security_initcall_end = .; +#ifdef CONFIG_BLK_DEV_INITRD + . = ALIGN(4); + __initramfs_start = .; + *(.init.ramfs) + __initramfs_end = .; +#endif + . = ALIGN(4096); + __per_cpu_start = .; + *(.data.percpu) + *(.data.percpu.shared_aligned) + __per_cpu_end = .; + + . = ALIGN(4096); + __init_end = .; + } > INIT + + .eh_frame : + { + PROVIDE (___eh_frame_begin = .); + *(.eh_frame) + LONG (0); + PROVIDE (___eh_frame_end = .); + } > INIT + + /DISCARD/ : { + EXIT_TEXT + EXIT_DATA + *(.exitcall.exit) + } + + .bss : { + . = ALIGN(4); + _sbss = . ; + *(.bss) + *(COMMON) + . = ALIGN(4) ; + _ebss = . ; + _end = . ; + } > BSS + + NOTES > BSS + +} diff --git a/target/linux/ubicom32/files/arch/ubicom32/lib/Makefile b/target/linux/ubicom32/files/arch/ubicom32/lib/Makefile new file mode 100644 index 0000000000..e7f41ccf3d --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/lib/Makefile @@ -0,0 +1,32 @@ +# +# arch/ubicom32/lib/Makefile +# <TODO: Replace with short file description> +# +# (C) Copyright 2009, Ubicom, Inc. +# +# This file is part of the Ubicom32 Linux Kernel Port. +# +# The Ubicom32 Linux Kernel Port is free software: you can redistribute +# it and/or modify it under the terms of the GNU General Public License +# as published by the Free Software Foundation, either version 2 of the +# License, or (at your option) any later version. +# +# The Ubicom32 Linux Kernel Port is distributed in the hope that it +# will be useful, but WITHOUT ANY WARRANTY; without even the implied +# warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See +# the GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with the Ubicom32 Linux Kernel Port. If not, +# see <http://www.gnu.org/licenses/>. +# +# Ubicom32 implementation derived from (with many thanks): +# arch/m68knommu +# arch/blackfin +# arch/parisc +# +# +# Makefile for m68knommu specific library files.. +# + +lib-y := checksum.o delay.o mem_ubicom32.o diff --git a/target/linux/ubicom32/files/arch/ubicom32/lib/checksum.c b/target/linux/ubicom32/files/arch/ubicom32/lib/checksum.c new file mode 100644 index 0000000000..c93920f7cb --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/lib/checksum.c @@ -0,0 +1,250 @@ +/* + * arch/ubicom32/lib/checksum.c + * Optimized checksum utilities for IP. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +/* + * INET An implementation of the TCP/IP protocol suite for the LINUX + * operating system. INET is implemented using the BSD Socket + * interface as the means of communication with the user level. + * + * IP/TCP/UDP checksumming routines + * + * Authors: Jorge Cwik, <jorge@laser.satlink.net> + * Arnt Gulbrandsen, <agulbra@nvg.unit.no> + * Tom May, <ftom@netcom.com> + * Andreas Schwab, <schwab@issan.informatik.uni-dortmund.de> + * Lots of code moved from tcp.c and ip.c; see those files + * for more names. + * + * 03/02/96 Jes Sorensen, Andreas Schwab, Roman Hodek: + * Fixed some nasty bugs, causing some horrible crashes. + * A: At some points, the sum (%0) was used as + * length-counter instead of the length counter + * (%1). Thanks to Roman Hodek for pointing this out. + * B: GCC seems to mess up if one uses too many + * data-registers to hold input values and one tries to + * specify d0 and d1 as scratch registers. Letting gcc choose these + * registers itself solves the problem. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +/* Revised by Kenneth Albanowski for m68knommu. Basic problem: unaligned access kills, so most + of the assembly has to go. */ + +#include <linux/module.h> +#include <net/checksum.h> + +static unsigned long do_csum(const unsigned char * buff, int len) +{ + int count; + unsigned long result = 0; + + /* + * The following optimized assembly code cannot handle data length less than 7 bytes! + */ + if (likely(len >= 7)) { + len -= (4 - (int)buff) & 3; + count = len >> 2; + asm ( + " sub.4 d15, #0, %2 \n\t" // set up for jump table + " and.4 d15, #(32-1), d15 \n\t" // d15 = (-m) & (32 - 1) + + " bfextu d14, %0, #2 \n\t" // test 2 LSB of buff + " jmpne.w.f 100f \n\t" + " add.4 %1, #0, %1 \n\t" // clear C + " moveai a3, #%%hi(1f) \n\t" // table jump + " lea.1 a3, %%lo(1f)(a3) \n\t" + " lea.4 a3, (a3,d15) \n\t" + " calli a3, 0(a3) \n\t" + + "100: sub.4 %0, %0, d14 \n\t" + " sub.4 d14, #4, d14 \n\t" + " lsl.4 d14, d14, #3 \n\t" + " add.4 %1, #0, %1 \n\t" // clear C + " moveai a3, #%%hi(1f) \n\t" // table jump + " lea.1 a3, %%lo(1f)(a3) \n\t" + " lea.4 a3, (a3,d15) \n\t" + " bfextu %1, (%0)4++, d14 \n\t" // read first partial word + " calli a3, 0(a3) \n\t" +#if 1 + "200: lsl.4 %3, %3, #3 \n\t" + " bfrvrs d15, (%0), #0 \n\t" // read last word (partial) + " bfextu d15, d15, %3 \n\t" + " bfrvrs d15, d15, #0 \n\t" + " add.4 %1, d15, %1 \n\t" + " addc %1, #0, %1 \n\t" // sample C again + " jmpt.w.t 2f \n\t" +#else + "200: move.1 d15, 0(%0) \n\t" + " lsl.4 d15, d15, #8 \n\t" + " add.4 %1, d15, %1 \n\t" + " addc %1, #0, %1 \n\t" // sample C again + " add.4 %3, #-1, %3 \n\t" + " jmpeq.w.t 2f \n\t" + + " move.1 d15, 1(%0) \n\t" + " add.4 %1, d15, %1 \n\t" + " addc %1, #0, %1 \n\t" // sample C again + " add.4 %3, #-1, %3 \n\t" + " jmpeq.w.t 2f \n\t" + + " move.1 d15, 2(%0) \n\t" + " lsl.4 d15, d15, #8 \n\t" + " add.4 %1, d15, %1 \n\t" + " addc %1, #0, %1 \n\t" // sample C again + " jmpt.w.t 2f \n\t" +#endif +#if defined(IP7000) || defined(IP7000_REV2) + "300: swapb.2 %1, %1 \n\t" +#else + "300: shmrg.2 %1, %1, %1 \n\t" + " lsr.4 %1, %1, #8 \n\t" + " bfextu %1, %1, #16 \n\t" +#endif + " jmpt.w.t 3f \n\t" + + "1: add.4 %1, (%0)4++, %1 \n\t" // first add without C + " .rept 31 \n\t" + " addc %1, (%0)4++, %1 \n\t" + " .endr \n\t" + " addc %1, #0, %1 \n\t" // sample C again + " add.4 %2, #-32, %2 \n\t" + " jmpgt.w.t 1b \n\t" + + " and.4 %3, #3, %3 \n\t" // check n + " jmpne.w.f 200b \n\t" + + "2: .rept 2 \n\t" + " lsr.4 d15, %1, #16 \n\t" + " bfextu %1, %1, #16 \n\t" + " add.4 %1, d15, %1 \n\t" + " .endr \n\t" + " btst d14, #3 \n\t" // start from odd address (<< 3)? + " jmpne.w.f 300b \n\t" + "3: \n\t" + + : "+a"(buff), "+d"(result), "+d"(count), "+d"(len) + : + : "d15", "d14", "a3", "cc" + ); + + return result; + } + + /* + * handle a few bytes and fold result into 16-bit + */ + while (len-- > 0) { + result += (*buff++ << 8); + if (len) { + result += *buff++; + len--; + } + } + asm ( + " .rept 2 \n\t" + " lsr.4 d15, %0, #16 \n\t" + " bfextu %0, %0, #16 \n\t" + " add.4 %0, d15, %0 \n\t" + " .endr \n\t" + : "+d" (result) + : + : "d15", "cc" + ); + + return result; +} + +/* + * This is a version of ip_compute_csum() optimized for IP headers, + * which always checksum on 4 octet boundaries. + */ +__sum16 ip_fast_csum(const void *iph, unsigned int ihl) +{ + return (__force __sum16)~do_csum(iph,ihl*4); +} + +/* + * computes the checksum of a memory block at buff, length len, + * and adds in "sum" (32-bit) + * + * returns a 32-bit number suitable for feeding into itself + * or csum_tcpudp_magic + * + * this function must be called with even lengths, except + * for the last fragment, which may be odd + * + * it's best to have buff aligned on a 32-bit boundary + */ +__wsum csum_partial(const void *buff, int len, __wsum sum) +{ + unsigned int result = do_csum(buff, len); + + /* add in old sum, and carry.. */ + result += (__force u32)sum; + if ((__force u32)sum > result) + result += 1; + return (__force __wsum)result; +} + +EXPORT_SYMBOL(csum_partial); + +/* + * this routine is used for miscellaneous IP-like checksums, mainly + * in icmp.c + */ +__sum16 ip_compute_csum(const void *buff, int len) +{ + return (__force __sum16)~do_csum(buff,len); +} + +/* + * copy from fs while checksumming, otherwise like csum_partial + */ + +__wsum +csum_partial_copy_from_user(const void __user *src, void *dst, + int len, __wsum sum, int *csum_err) +{ + if (csum_err) *csum_err = 0; + memcpy(dst, (__force const void *)src, len); + return csum_partial(dst, len, sum); +} + +/* + * copy from ds while checksumming, otherwise like csum_partial + */ + +__wsum +csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum) +{ + memcpy(dst, src, len); + return csum_partial(dst, len, sum); +} diff --git a/target/linux/ubicom32/files/arch/ubicom32/lib/delay.c b/target/linux/ubicom32/files/arch/ubicom32/lib/delay.c new file mode 100644 index 0000000000..d19f97f09e --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/lib/delay.c @@ -0,0 +1,49 @@ +/* + * arch/ubicom32/lib/delay.c + * Ubicom32 implementation of udelay() + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ + +#include <linux/module.h> +#include <asm/param.h> +#include <asm/delay.h> +#include <asm/ip5000.h> + +/* + * read_current_timer() + * Return the current value of sysval. + */ +int __devinit read_current_timer(unsigned long *timer_val) +{ + *timer_val = (long)(UBICOM32_IO_TIMER->sysval); + return 0; +} + + +void udelay(unsigned long usecs) +{ + _udelay(usecs); +} +EXPORT_SYMBOL(udelay); diff --git a/target/linux/ubicom32/files/arch/ubicom32/lib/mem_ubicom32.c b/target/linux/ubicom32/files/arch/ubicom32/lib/mem_ubicom32.c new file mode 100644 index 0000000000..d9c302ec64 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/lib/mem_ubicom32.c @@ -0,0 +1,343 @@ +/* + * arch/ubicom32/lib/mem_ubicom32.c + * String functions. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/compiler.h> + +#define LIKELY likely +#define UNLIKELY unlikely + +typedef u32_t addr_t; + +/* + * memcpy() + */ +void *memcpy(void *dest, const void *src, size_t n) +{ + void *dest_ret = dest; + + if (LIKELY((((addr_t)dest ^ (addr_t)src) & 3) == 0) && LIKELY(n > 6)) { + size_t m; + n -= (4 - (addr_t)dest) & 0x03; + m = n >> 2; + asm volatile ( + " sub.4 d15, #0, %2 \n\t" // set up for jump table + " and.4 d15, #(32-1), d15 \n\t" // d15 = (-m) & (32 - 1) + " moveai a3, #%%hi(1f) \n\t" + " lea.1 a3, %%lo(1f)(a3) \n\t" + " lea.4 a3, (a3,d15) \n\t" + + " bfextu d15, %0, #2 \n\t" // d15 = (dest & 3) + " jmpne.w.f 100f \n\t" + " calli a3, 0(a3) \n\t" // 4-byte alignment + + "100: cmpi d15, #2 \n\t" + " jmpne.s.f 101f \n\t" + " move.2 (%0)2++, (%1)2++ \n\t" + " calli a3, 0(a3) \n\t" // 2-byte alignment + + "101: move.1 (%0)1++, (%1)1++ \n\t" + " jmpgt.s.f 102f \n\t" // 3-byte alignment + " move.2 (%0)2++, (%1)2++ \n\t" // 1-byte alignment + "102: calli a3, 0(a3) \n\t" + + "200: cmpi %3, #2 \n\t" + " jmplt.s.f 201f \n\t" + " move.2 (%0)2++, (%1)2++ \n\t" + " jmpeq.s.t 2f \n\t" + "201: move.1 (%0)1++, (%1)1++ \n\t" + " jmpt.w.t 2f \n\t" + + "1: .rept 25 \n\t" + " movea (%0)4++, (%1)4++ \n\t" + " .endr \n\t" + " .rept 7 \n\t" + " move.4 (%0)4++, (%1)4++ \n\t" + " .endr \n\t" + " add.4 %2, #-32, %2 \n\t" + " jmpgt.w.f 1b \n\t" + + " and.4 %3, #3, %3 \n\t" // check n + " jmpne.w.f 200b \n\t" + "2: \n\t" + : "+a" (dest), "+a" (src), "+d" (m), "+d" (n) + : + : "d15", "a3", "memory", "cc" + ); + + return dest_ret; + } + + if (LIKELY((((addr_t)dest ^ (addr_t)src) & 1) == 0) && LIKELY(n > 2)) { + size_t m; + n -= (addr_t)dest & 0x01; + m = n >> 1; + asm volatile ( + " sub.4 d15, #0, %2 \n\t" // set up for jump table + " and.4 d15, #(32-1), d15 \n\t" // d15 = (-m) & (32 - 1) + " moveai a3, #%%hi(1f) \n\t" + " lea.1 a3, %%lo(1f)(a3) \n\t" + " lea.4 a3, (a3,d15) \n\t" + + " btst %0, #0 \n\t" // check bit 0 + " jmpne.w.f 100f \n\t" + " calli a3, 0(a3) \n\t" // 4-byte alignment + + "100: move.1 (%0)1++, (%1)1++ \n\t" + " calli a3, 0(a3) \n\t" + + "200: move.1 (%0)1++, (%1)1++ \n\t" + " jmpt.w.t 2f \n\t" + + "1: .rept 32 \n\t" + " move.2 (%0)2++, (%1)2++ \n\t" + " .endr \n\t" + " add.4 %2, #-32, %2 \n\t" + " jmpgt.w.f 1b \n\t" + + " and.4 %3, #1, %3 \n\t" // check n + " jmpne.w.f 200b \n\t" + "2: \n\t" + + : "+a" (dest), "+a" (src), "+d" (m), "+d" (n) + : + : "d15", "a3", "memory", "cc" + ); + + return dest_ret; + } + + asm volatile ( + " sub.4 d15, #0, %2 \n\t" + " jmpeq.w.f 2f \n\t" + " and.4 d15, #(16-1), d15 \n\t" // d15 = (-n) & (16 - 1) + " moveai a3, #%%hi(1f) \n\t" + " lea.1 a3, %%lo(1f)(a3) \n\t" + " lea.4 a3, (a3,d15) \n\t" + " calli a3, 0(a3) \n\t" + + "1: .rept 16 \n\t" + " move.1 (%0)1++, (%1)1++ \n\t" + " .endr \n\t" + " add.4 %2, #-16, %2 \n\t" + " jmpgt.w.f 1b \n\t" + "2: \n\t" + + : "+a" (dest), "+a" (src), "+d" (n) + : + : "d15", "a3", "memory", "cc" + ); + + return dest_ret; +} + +/* + * memset() + */ +void *memset(void *s, int c, size_t n) +{ + void *s_ret = s; + + if (LIKELY(n > 6)) { + size_t m; + n -= (4 - (addr_t)s) & 0x03; + m = n >> 2; + asm volatile ( + " sub.4 d15, #0, %2 \n\t" // set up for jump table + " and.4 d15, #(32-1), d15 \n\t" // d15 = (-m) & (32 - 1) + " shmrg.1 %1, %1, %1 \n\t" + " shmrg.2 %1, %1, %1 \n\t" // %1 = (c<<24)|(c<<16)|(c<<8)|c + " moveai a3, #%%hi(1f) \n\t" + " lea.1 a3, %%lo(1f)(a3) \n\t" + " lea.4 a3, (a3,d15) \n\t" + + " bfextu d15, %0, #2 \n\t" // d15 = (s & 3) + " jmpne.w.f 100f \n\t" + " calli a3, 0(a3) \n\t" // 4-byte alignment + + "100: cmpi d15, #2 \n\t" + " jmpne.s.f 101f \n\t" + " move.2 (%0)2++, %1 \n\t" + " calli a3, 0(a3) \n\t" // 2-byte alignment + + "101: move.1 (%0)1++, %1 \n\t" + " jmpgt.s.f 102f \n\t" // 3-byte alignment + " move.2 (%0)2++, %1 \n\t" // 1-byte alignment + "102: calli a3, 0(a3) \n\t" + + "200: cmpi %3, #2 \n\t" + " jmplt.s.f 201f \n\t" + " move.2 (%0)2++, %1 \n\t" + " jmpeq.s.t 2f \n\t" + "201: move.1 (%0)1++, %1 \n\t" + " jmpt.w.t 2f \n\t" + + "1: .rept 25 \n\t" + " movea (%0)4++, %1 \n\t" + " .endr \n\t" + " .rept 7 \n\t" + " move.4 (%0)4++, %1 \n\t" + " .endr \n\t" + " add.4 %2, #-32, %2 \n\t" + " jmpgt.w.f 1b \n\t" + + " and.4 %3, #3, %3 \n\t" // test bit 1 of n + " jmpne.w.f 200b \n\t" + "2: \n\t" + + : "+a" (s), "+d" (c), "+d" (m), "+d" (n) + : + : "d15", "a3", "memory", "cc" + ); + + return s_ret; + } + + asm volatile ( + " sub.4 d15, #0, %2 \n\t" + " jmpeq.w.f 2f \n\t" + " and.4 d15, #(8-1), d15 \n\t" // d15 = (-%2) & (16 - 1) + " moveai a3, #%%hi(1f) \n\t" + " lea.1 a3, %%lo(1f)(a3) \n\t" + " lea.4 a3, (a3,d15) \n\t" + " calli a3, 0(a3) \n\t" + + "1: .rept 8 \n\t" + " move.1 (%0)1++, %1 \n\t" + " .endr \n\t" + "2: \n\t" + + : "+a" (s), "+d" (c), "+d" (n) + : + : "d15", "a3", "memory", "cc" + ); + + return s_ret; +} + +void *memmove(void *dest, const void *src, size_t n) +{ + char *tmp; + const char *s; + + if (n == 0) + return dest; + + tmp = dest; + s = src; + + /* + * Will perform 16-bit move if possible + */ + if (likely((((u32)dest | (u32)src | n) & 1) == 0)) { + if (dest <= src) { + asm volatile ( + " sub.4 d15, #0, %2 \n\t" // set up for jump table + " and.4 d15, #(32-2), d15 \n\t" // d15 = (- count) & (32 - 2) + " moveai a3, #%%hi(1f) \n\t" + " lea.1 a3, %%lo(1f)(a3) \n\t" + " lea.2 a3, (a3,d15) \n\t" + " calli a3, 0(a3) \n\t" + + "1: .rept 16 \n\t" + " move.2 (%0)2++, (%1)2++ \n\t" + " .endr \n\t" + " add.4 %2, #-32, %2 \n\t" + " jmpgt.w.f 1b \n\t" + + : "+a" (tmp), "+a" (s), "+d" (n) + : + : "d15", "a3", "memory", "cc" + ); + } else { + tmp += n; + s += n; + asm volatile ( + " sub.4 d15, #0, %2 \n\t" // set up for jump table + " and.4 d15, #(32-2), d15 \n\t" // d15 = (- count) & (32 - 2) + " moveai a3, #%%hi(1f) \n\t" + " lea.1 a3, %%lo(1f)(a3) \n\t" + " lea.2 a3, (a3,d15) \n\t" + " calli a3, 0(a3) \n\t" + + "1: .rept 16 \n\t" + " move.2 -2(%0)++, -2(%1)++ \n\t" + " .endr \n\t" + " add.4 %2, #-32, %2 \n\t" + " jmpgt.w.f 1b \n\t" + + : "+a" (tmp), "+a" (s), "+d" (n) + : + : "d15", "a3", "memory", "cc" + ); + } + return dest; + } + + if (dest <= src) { + asm volatile ( + " sub.4 d15, #0, %2 \n\t" // set up for jump table + " and.4 d15, #(16-1), d15 \n\t" // d15 = (- count) & (16 - 1) + " moveai a3, #%%hi(1f) \n\t" + " lea.1 a3, %%lo(1f)(a3) \n\t" + " lea.4 a3, (a3,d15) \n\t" + " calli a3, 0(a3) \n\t" + + "1: .rept 16 \n\t" + " move.1 (%0)1++, (%1)1++ \n\t" + " .endr \n\t" + " add.4 %2, #-16, %2 \n\t" + " jmpgt.w.f 1b \n\t" + : "+a" (tmp), "+a" (s), "+d" (n) + : + : "d15", "a3", "memory", "cc" + ); + } else { + tmp += n; + s += n; + asm volatile ( + " sub.4 d15, #0, %2 \n\t" // set up for jump table + " and.4 d15, #(16-1), d15 \n\t" // d15 = (- count) & (16 - 1) + " moveai a3, #%%hi(1f) \n\t" + " lea.1 a3, %%lo(1f)(a3) \n\t" + " lea.4 a3, (a3,d15) \n\t" + " calli a3, 0(a3) \n\t" + + "1: .rept 16 \n\t" + " move.1 -1(%0)++, -1(%1)++ \n\t" + " .endr \n\t" + " add.4 %2, #-16, %2 \n\t" + " jmpgt.w.f 1b \n\t" + : "+a" (tmp), "+a" (s), "+d" (n) + : + : "d15", "a3", "memory", "cc" + ); + } + return dest; +} diff --git a/target/linux/ubicom32/files/arch/ubicom32/mach-common/Kconfig.switch b/target/linux/ubicom32/files/arch/ubicom32/mach-common/Kconfig.switch new file mode 100644 index 0000000000..0303e1600b --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/mach-common/Kconfig.switch @@ -0,0 +1,12 @@ +menuconfig UBICOM_SWITCH + tristate "Switch devices" + help + This option provides Ethernet switch management options via proc fs + +if UBICOM_SWITCH +config UBICOM_SWITCH_BCM539X + tristate "Broadcom BCM539X series (SPI)" + depends on SPI_MASTER + help + Supports Broadcom BCM539X Gigabit Ethernet Switches over SPI +endif diff --git a/target/linux/ubicom32/files/arch/ubicom32/mach-common/Makefile b/target/linux/ubicom32/files/arch/ubicom32/mach-common/Makefile new file mode 100644 index 0000000000..8c645aff6a --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/mach-common/Makefile @@ -0,0 +1,41 @@ +# +# arch/ubicom32/mach-common/Makefile +# Makefile for Ubicom32 generic drivers/code. +# +# (C) Copyright 2009, Ubicom, Inc. +# +# This file is part of the Ubicom32 Linux Kernel Port. +# +# The Ubicom32 Linux Kernel Port is free software: you can redistribute +# it and/or modify it under the terms of the GNU General Public License +# as published by the Free Software Foundation, either version 2 of the +# License, or (at your option) any later version. +# +# The Ubicom32 Linux Kernel Port is distributed in the hope that it +# will be useful, but WITHOUT ANY WARRANTY; without even the implied +# warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See +# the GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with the Ubicom32 Linux Kernel Port. If not, +# see <http://www.gnu.org/licenses/>. +# +# Ubicom32 implementation derived from (with many thanks): +# arch/m68knommu +# arch/blackfin +# arch/parisc +# + +obj-y += cachectl.o common.o usb_tio.o usb.o ubi32-gpio.o board.o bootargs.o profile.o +obj-$(CONFIG_PCI) += pci.o io.o + +obj-$(CONFIG_FB_UBICOM32) += vdc_tio.o +obj-$(CONFIG_UBICOM_HID) += ubicom32hid.o +obj-$(CONFIG_UBICOM_INPUT) += ubicom32input.o +obj-$(CONFIG_UBICOM_INPUT_I2C) += ubicom32input_i2c.o +obj-$(CONFIG_UBICOM_SWITCH) += switch-core.o +obj-$(CONFIG_UBICOM_SWITCH_BCM539X) += switch-bcm539x.o +obj-$(CONFIG_UIO_UBICOM32RING) += ring_tio.o +obj-$(CONFIG_SND_UBI32) += audio.o +obj-$(CONFIG_UBICOM32_PLIO) += plio.o + diff --git a/target/linux/ubicom32/files/arch/ubicom32/mach-common/audio.c b/target/linux/ubicom32/files/arch/ubicom32/mach-common/audio.c new file mode 100644 index 0000000000..37db89093d --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/mach-common/audio.c @@ -0,0 +1,134 @@ +/* + * arch/ubicom32/mach-common/audio.c + * Generic initialization for Ubicom32 Audio + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + */ + +#include <linux/platform_device.h> +#include <linux/types.h> + +#include <asm/devtree.h> +#include <asm/audio.h> +#include <asm/ubi32-pcm.h> + +/* + * The number of audio devices currently allocated, used for .id + */ +static int __initdata audio_device_count; + +/* + * The maximum number of resources (cards) that the audio will have. + * Currently 3, a register space, and up to 2 interrupts. + */ +#define AUDIO_MAX_RESOURCES 3 + +/* + * audio_device_alloc + * Checks the device tree and allocates a platform_device if found + */ +struct platform_device * __init audio_device_alloc(const char *driver_name, + const char *node_name, const char *inst_name, int priv_bytes) +{ + struct platform_device *pdev; + struct resource *res; + struct audio_node *audio_node; + struct ubi32pcm_platform_data *pdata; + struct audio_dev_regs *adr; + int idx; + + /* + * Check the device tree for the audio node + */ + audio_node = (struct audio_node *)devtree_find_node(node_name); + if (!audio_node) { + printk(KERN_WARNING "audio device '%s' not found\n", node_name); + return NULL; + } + + if (audio_node->version != AUDIONODE_VERSION) { + printk(KERN_WARNING "audio node not compatible\n"); + return NULL; + } + + /* + * Find the instance in this node + */ + adr = audio_node->regs->adr; + for (idx = 0; idx < audio_node->regs->max_devs; idx++) { + if ((adr->version == AUDIO_DEV_REGS_VERSION) && + (strcmp(adr->name, inst_name) == 0)) { + break; + } + adr++; + } + if (idx == audio_node->regs->max_devs) { + printk(KERN_WARNING "audio inst '%s' not found in device '%s'\n", inst_name, node_name); + return NULL; + } + + /* + * Dynamically create the platform_device structure and resources + */ + pdev = kzalloc(sizeof(struct platform_device) + + sizeof(struct ubi32pcm_platform_data) + + priv_bytes , GFP_KERNEL); + if (!pdev) { + printk(KERN_WARNING "audio could not alloc pdev\n"); + return NULL; + } + + res = kzalloc(sizeof(struct resource) * AUDIO_MAX_RESOURCES, + GFP_KERNEL); + if (!res) { + kfree(pdev); + printk(KERN_WARNING "audio could not alloc res\n"); + return NULL; + } + + pdev->name = driver_name; + pdev->id = audio_device_count++; + pdev->resource = res; + + /* + * Fill in the resources and platform data from devtree information + */ + res[0].start = (u32_t)(audio_node->regs); + res[0].end = (u32_t)(audio_node->regs); + res[0].flags = IORESOURCE_MEM; + res[1 + AUDIO_TX_IRQ_RESOURCE].start = audio_node->dn.sendirq; + res[1 + AUDIO_TX_IRQ_RESOURCE].flags = IORESOURCE_IRQ; + res[1 + AUDIO_RX_IRQ_RESOURCE].start = audio_node->dn.recvirq; + res[1 + AUDIO_RX_IRQ_RESOURCE].flags = IORESOURCE_IRQ; + pdev->num_resources = 3; + + printk(KERN_INFO "Audio.%d '%s':'%s' found irq=%d/%d.%d regs=%p pdev=%p/%p\n", + pdev->id, node_name, inst_name, audio_node->dn.sendirq, + audio_node->dn.recvirq, idx, audio_node->regs, pdev, res); + pdata = (struct ubi32pcm_platform_data *)(pdev + 1); + pdev->dev.platform_data = pdata; + pdata->node_name = node_name; + pdata->inst_name = inst_name; + pdata->inst_num = idx; + if (priv_bytes) { + pdata->priv_data = pdata + 1; + } + + return pdev; +} diff --git a/target/linux/ubicom32/files/arch/ubicom32/mach-common/board.c b/target/linux/ubicom32/files/arch/ubicom32/mach-common/board.c new file mode 100644 index 0000000000..9634e3413f --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/mach-common/board.c @@ -0,0 +1,63 @@ +/* + * arch/ubicom32/mach-common/board.c + * Board init and support code. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#include <linux/module.h> +#include <linux/types.h> +#include <linux/cpu.h> +#include <asm/devtree.h> + +struct boardnode { + struct devtree_node dn; + const char *revision; +}; + +static const struct boardnode *bn; + +/* + * board_get_revision() + * Returns revision string of the board. + */ +const char *board_get_revision(void) +{ + if (!bn) { + return "NULL"; + } + + return bn->revision; +} + +/* + * board_init + */ +void __init board_init(void) +{ + bn = (struct boardnode *)devtree_find_node("board"); + if (!bn) { + printk(KERN_WARNING "board node not found\n"); + return; + } +} diff --git a/target/linux/ubicom32/files/arch/ubicom32/mach-common/bootargs.c b/target/linux/ubicom32/files/arch/ubicom32/mach-common/bootargs.c new file mode 100644 index 0000000000..2967150987 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/mach-common/bootargs.c @@ -0,0 +1,63 @@ +/* + * arch/ubicom32/mach-common/bootargs.c + * Board init and support code. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#include <linux/module.h> +#include <linux/types.h> +#include <linux/cpu.h> +#include <asm/devtree.h> + +struct bootargsnode { + struct devtree_node dn; + const char cmdline[512]; +}; + +static const struct bootargsnode *ban; + +/* + * bootargs_get_cmdline() + * Returns kernel boot arguments set by the bootloader. + */ +const char *bootargs_get_cmdline(void) +{ + if (!ban) { + return ""; + } + + return ban->cmdline; +} + +/* + * bootargs_init + */ +void __init bootargs_init(void) +{ + ban = (struct bootargsnode *)devtree_find_node("bootargs"); + if (!ban) { + printk(KERN_WARNING "bootargs node not found\n"); + return; + } +} diff --git a/target/linux/ubicom32/files/arch/ubicom32/mach-common/cachectl.c b/target/linux/ubicom32/files/arch/ubicom32/mach-common/cachectl.c new file mode 100644 index 0000000000..afb9dc4d4a --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/mach-common/cachectl.c @@ -0,0 +1,136 @@ +/* + * arch/ubicom32/mach-common/cachectl.c + * Architecture cache control support + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ + +#include <linux/types.h> +#include <linux/module.h> +#include <asm/cachectl.h> + +/* + * The write queue flush procedure in mem_cache_control needs to make + * DCACHE_WRITE_QUEUE_LENGTH writes to DDR (not OCM). Here we reserve some + * memory for this operation. + * Allocate array of cache lines of least DCACHE_WRITE_QUEUE_LENGTH + 1 words in + * length rounded up to the nearest cache line. + */ +#define CACHE_WRITE_QUEUE_FLUSH_AREA_SIZE \ + ALIGN(sizeof(int) * (DCACHE_WRITE_QUEUE_LENGTH + 1), CACHE_LINE_SIZE) + +static char cache_write_queue_flush_area[CACHE_WRITE_QUEUE_FLUSH_AREA_SIZE] + __attribute__((aligned(CACHE_LINE_SIZE))); + +/* + * ONE_CCR_ADDR_OP is a helper macro that executes a single CCR operation. + */ +#define ONE_CCR_ADDR_OP(cc, op_addr, op) \ + do { \ + asm volatile ( \ + " btst "D(CCR_CTRL)"(%0), #"D(CCR_CTRL_VALID)" \n\t" \ + " jmpne.f .-4 \n\t" \ + " move.4 "D(CCR_ADDR)"(%0), %1 \n\t" \ + " move.1 "D(CCR_CTRL+3)"(%0), %2 \n\t" \ + " bset "D(CCR_CTRL)"(%0), "D(CCR_CTRL)"(%0), #"D(CCR_CTRL_VALID)" \n\t" \ + " cycles 2 \n\t" \ + " btst "D(CCR_CTRL)"(%0), #"D(CCR_CTRL_DONE)" \n\t" \ + " jmpeq.f .-4 \n\t" \ + : \ + : "a"(cc), "r"(op_addr), "r"(op & 0xff) \ + : "cc" \ + ); \ + } while (0) + +/* + * mem_cache_control() + * Special cache control operation + */ +void mem_cache_control(unsigned long cc, unsigned long begin_addr, + unsigned long end_addr, unsigned long op) +{ + unsigned long op_addr; + int dccr = cc == DCCR_BASE; + if (dccr && op == CCR_CTRL_FLUSH_ADDR) { + /* + * We ensure all previous writes have left the data cache write + * queue by sending DCACHE_WRITE_QUEUE_LENGTH writes (to + * different words) down the queue. If this is not done it's + * possible that the data we are trying to flush hasn't even + * entered the data cache. + * The +1 ensure that the final 'flush' is actually a flush. + */ + int *flush_area = (int *)cache_write_queue_flush_area; + asm volatile( + " .rept "D(DCACHE_WRITE_QUEUE_LENGTH + 1)" \n\t" + " move.4 (%0)4++, d0 \n\t" + " .endr \n\t" + : "+a"(flush_area) + ); + } + + if (dccr) + UBICOM32_LOCK(DCCR_LOCK_BIT); + else + UBICOM32_LOCK(ICCR_LOCK_BIT); + + /* + * Calculate the cache lines we need to operate on that include + * begin_addr though end_addr. + */ + begin_addr = begin_addr & ~(CACHE_LINE_SIZE - 1); + end_addr = (end_addr + CACHE_LINE_SIZE - 1) & ~(CACHE_LINE_SIZE - 1); + op_addr = begin_addr; + + do { + ONE_CCR_ADDR_OP(cc, op_addr, op); + op_addr += CACHE_LINE_SIZE; + } while (likely(op_addr < end_addr)); + + if (dccr && op == CCR_CTRL_FLUSH_ADDR) { + /* + * It turns out that when flushing the data cache the last flush + * isn't actually complete at this point. This is because there + * is another write buffer on the DDR side of the cache that is + * arbitrated with the I-Cache. + * + * The only foolproof method that ensures that the last data + * cache flush *actually* completed is to do another flush on a + * dirty cache line. This flush will block until the DDR write + * buffer is empty. + * + * Rather than creating a another dirty cache line, we use the + * flush_area above as we know that it is dirty from previous + * writes. + */ + ONE_CCR_ADDR_OP(cc, cache_write_queue_flush_area, op); + } + + if (dccr) + UBICOM32_UNLOCK(DCCR_LOCK_BIT); + else + UBICOM32_UNLOCK(ICCR_LOCK_BIT); + +} +EXPORT_SYMBOL(mem_cache_control); diff --git a/target/linux/ubicom32/files/arch/ubicom32/mach-common/common.c b/target/linux/ubicom32/files/arch/ubicom32/mach-common/common.c new file mode 100644 index 0000000000..2f183bd10a --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/mach-common/common.c @@ -0,0 +1,64 @@ +/* + * arch/ubicom32/mach-common/common.c + * Common platform support. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#include <linux/version.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/string.h> +#include <linux/clk.h> +#include <linux/mutex.h> +#include <linux/platform_device.h> + + +/* Minimum CLK support */ + +struct clk *clk_get(struct device *dev, const char *id) +{ + return ERR_PTR(-ENOENT); +} +EXPORT_SYMBOL(clk_get); + +void clk_put(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_put); + +int clk_enable(struct clk *clk) +{ + return 0; +} +EXPORT_SYMBOL(clk_enable); + + +void clk_disable(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_disable); diff --git a/target/linux/ubicom32/files/arch/ubicom32/mach-common/io.c b/target/linux/ubicom32/files/arch/ubicom32/mach-common/io.c new file mode 100644 index 0000000000..3c55ba771e --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/mach-common/io.c @@ -0,0 +1,250 @@ +/* + * arch/ubicom32/mach-common/io.c + * PCI I/O memory read/write support functions. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/io.h> + +#ifdef CONFIG_PCI +unsigned char ioread8(void __iomem *addr) +{ + if (IS_PCI_ADDRESS(addr)) + return ubi32_pci_read_u8(addr); + else + return (unsigned char)(*(volatile unsigned char *)addr); +} +EXPORT_SYMBOL(ioread8); + +unsigned short ioread16(void __iomem *addr) +{ + if (IS_PCI_ADDRESS(addr)) + return ubi32_pci_read_u16(addr); + else + return (unsigned short)(*(volatile unsigned short *)addr); +} +EXPORT_SYMBOL(ioread16); + +unsigned int ioread32(void __iomem *addr) +{ + if (IS_PCI_ADDRESS(addr)) + return ubi32_pci_read_u32(addr); + else + return (unsigned int)(*(volatile unsigned int *)addr); +} +EXPORT_SYMBOL(ioread32); + +void iowrite32(unsigned int val, void __iomem *addr) +{ + if (IS_PCI_ADDRESS(addr)) + ubi32_pci_write_u32(val, addr); + else + *(volatile unsigned int *)addr = val; +} +EXPORT_SYMBOL(iowrite32); + +void iowrite16(unsigned short val, void __iomem *addr) +{ + if (IS_PCI_ADDRESS(addr)) + ubi32_pci_write_u16(val, addr); + else + *(volatile unsigned short *)addr = val; +} +EXPORT_SYMBOL(iowrite16); + +void iowrite8(unsigned char val, void __iomem *addr) +{ + if (IS_PCI_ADDRESS(addr)) + ubi32_pci_write_u8(val, addr); + else + *(volatile unsigned char *)addr = val; +} +EXPORT_SYMBOL(iowrite8); + +void memcpy_fromio(void *to, const volatile void __iomem *from, unsigned len) +{ + if (IS_PCI_ADDRESS(from)) { + if ((((u32_t)from & 0x3) == 0) && (((u32_t)to & 0x3) == 0)) { + while ((int)len >= 4) { + *(u32_t *)to = ubi32_pci_read_u32(from); + to += 4; + from += 4; + len -= 4; + } + } else if ((((u32_t)from & 0x1) == 0) && + (((u32_t)to & 0x1) == 0)) { + while ((int)len >= 2) { + *(u16_t *)to = ubi32_pci_read_u16(from); + to += 2; + from += 2; + len -= 2; + } + } + + while (len) { + *(u8_t *)to = ubi32_pci_read_u8(from); + to++; + from++; + len--; + } + } else + memcpy(to, (void *)from, len); +} +EXPORT_SYMBOL(memcpy_fromio); + +void memcpy_toio(volatile void __iomem *to, const void *from, unsigned len) +{ + if (IS_PCI_ADDRESS(to)) { + if ((((u32_t)from & 0x3) == 0) && (((u32_t)to & 0x3) == 0)) { + while ((int)len >= 4) { + ubi32_pci_write_u32(*(u32_t *)from, to); + to += 4; + from += 4; + len -= 4; + } + } else if ((((u32_t)from & 0x1) == 0) && + (((u32_t)to & 0x1) == 0)) { + while ((int)len >= 2) { + ubi32_pci_write_u16(*(u16_t *)from, to); + to += 2; + from += 2; + len -= 2; + } + } + + while (len) { + ubi32_pci_write_u8(*(u8_t *)from, to); + from++; + to++; + len--; + } + } else + memcpy((void *)to, from, len); + +} +EXPORT_SYMBOL(memcpy_toio); + +void memset_io(volatile void __iomem *addr, int val, size_t len) +{ + if (IS_PCI_ADDRESS(addr)) { + while (len) { + ubi32_pci_write_u8((unsigned char)val, addr); + addr++; + len--; + } + } else + memset((void *)addr, val, len); + +} +EXPORT_SYMBOL(memset_io); + +void ioread8_rep(void __iomem *port, void *buf, unsigned long count) +{ + if (IS_PCI_ADDRESS(port)) { + while (count) { + *(u8_t *)buf = ioread8(port); + buf++; + count--; + } + } else { + insb((unsigned int)port, buf, count); + } + +} +EXPORT_SYMBOL(ioread8_rep); + +void ioread16_rep(void __iomem *port, void *buf, unsigned long count) +{ + if (IS_PCI_ADDRESS(port)) { + while (count) { + *(u16_t *)buf = ioread16(port); + buf += 2; + count--; + } + } else { + insw((unsigned int)port, buf, count); + } +} +EXPORT_SYMBOL(ioread16_rep); + +void ioread32_rep(void __iomem *port, void *buf, unsigned long count) +{ + if (IS_PCI_ADDRESS(port)) { + while (count) { + *(u32_t *)buf = ioread32(port); + buf += 4; + count--; + } + } else { + insl((unsigned int)port, buf, count); + } +} +EXPORT_SYMBOL(ioread32_rep); + +void iowrite8_rep(void __iomem *port, const void *buf, unsigned long count) +{ + if (IS_PCI_ADDRESS(port)) { + while (count) { + iowrite8(*(u8_t *)buf, port); + buf++; + count--; + } + } else { + outsb((unsigned int)port, buf, count); + } + +} +EXPORT_SYMBOL(iowrite8_rep); + +void iowrite16_rep(void __iomem *port, const void *buf, unsigned long count) +{ + if (IS_PCI_ADDRESS(port)) { + while (count) { + iowrite16(*(u16_t *)buf, port); + buf += 2; + count--; + } + } else { + outsw((unsigned int)port, buf, count); + } +} +EXPORT_SYMBOL(iowrite16_rep); + +void iowrite32_rep(void __iomem *port, const void *buf, unsigned long count) +{ + if (IS_PCI_ADDRESS(port)) { + while (count) { + iowrite32(*(u32_t *)buf, port); + buf += 4; + count--; + } + } else { + outsl((unsigned int)port, buf, count); + } +} +EXPORT_SYMBOL(iowrite32_rep); + +#endif /* CONFIG_PCI */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/mach-common/pci.c b/target/linux/ubicom32/files/arch/ubicom32/mach-common/pci.c new file mode 100644 index 0000000000..a3a07121d9 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/mach-common/pci.c @@ -0,0 +1,1157 @@ +/* + * arch/ubicom32/mach-common/pci.c + * PCI interface management. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/seq_file.h> +#include <linux/proc_fs.h> + +#include <asm/devtree.h> +#include <asm/ip5000.h> +#include <asm/ubicom32-common.h> + +static int debug_pci = 1 ; + +/* #define PCI_USE_INTERNAL_LOCK 1 */ + +#ifdef PCI_USE_INTERNAL_LOCK +#define PCI_LOCK(lock, irqflag) pci_lock_acquire(irqflag) +#define PCI_UNLOCK(lock, irqflag) pci_lock_release(irqflag) +#elif defined(CONFIG_SMP) +static DEFINE_SPINLOCK(pci_master_lock); +#define PCI_LOCK(lock, irqflag) spin_lock_irqsave(lock, irqflag) +#define PCI_UNLOCK(lock, irqflag) spin_unlock_irqrestore(lock, irqflag) +#else +#define PCI_LOCK(lock, irqflag) local_irq_save(irqflag) +#define PCI_UNLOCK(lock, irqflag) local_irq_restore(irqflag) +#endif + +#define PCI_DEV0_IDSEL CONFIG_PCI_DEV0_IDSEL +#define PCI_DEV1_IDSEL CONFIG_PCI_DEV1_IDSEL + +/* + * PCI commands + */ +#define PCI_CMD_INT_ACK 0x00 /* not supported */ +#define PCI_CMD_SPECIAL 0x01 /* not supported */ +#define PCI_CMD_IO_READ 0x02 +#define PCI_CMD_IO_WRITE 0x03 +#define PCI_CMD_MEM_READ 0x06 +#define PCI_CMD_MEM_WRITE 0x07 +#define PCI_CMD_CFG_READ 0x0a +#define PCI_CMD_CFG_WRITE 0x0b +#define PCI_CMD_MEM_READ_MULT 0x0c /* not supported */ +#define PCI_CMD_DUAL_ADDR 0x0d /* not supported */ +#define PCI_CMD_MEM_READ_LINE 0x0e /* not supported */ +#define PCI_CMD_MEM_WRITE_INVAL 0x0f /* not supported */ +/* + * Status codes, returned by pci_read_u32() and pci_write_u32() + */ +#define PCI_RESP_IN_PROGRESS 0xff /* request still in queue */ +#define PCI_RESP_OK 0 +/* + * The following codes indicate that the request has completed + */ +#define PCI_RESP_NO_DEVSEL 1 /* timeout before target asserted + * DEVSEL! */ +#define PCI_RESP_LOST_DEVSEL 2 /* had DEVSEL, but went away before + * transfer completed! */ +#define PCI_RESP_BAD_TRDY 3 /* target asserted TRDY without + * DEVSEL! */ +#define PCI_RESP_NO_TRDY 4 /* timeout before target asserted + * TRDY! */ +#define PCI_RESP_BAD_STOP 5 /* target asserted STOP and TRDY + * without DEVSEL! */ +#define PCI_RESP_TARGET_ABORT 6 +#define PCI_RESP_TARGET_RETRY 7 +#define PCI_RESP_TARGET_DISCONNECT 8 +#define PCI_RESP_MISMATCH 9 /* data read back doesn't match data + * written - debug only, the core PCI + * routines never return this */ +#define PCI_RESP_DET_SERR 10 +#define PCI_RESP_DET_PERR 11 +#define PCI_RESP_MALFORMED_REQ 12 /* Could be due to misaligned + * requests or invalid address */ +#define PCI_RESP_NO_RESOURCE 13 /* Could be memory or other resourse + * like queue space */ +#define PCI_RESP_ERROR 14 /* All emcompassing error */ + +/* registers in PCI config space */ +#define PCI_DEVICE_VENDOR_ID_REG 0x00 +#define PCI_STATUS_COMMAND_REG 0x04 +#define PCI_CLASS_REVISION_REG 0x08 +#define PCI_BHLC_REG 0x0c /* BIST, Header type, Latency + * timer, Cache line size */ +#define PCI_BASE_ADDR_REG 0x10 +#define PCI_BASE_REG_COUNT 6 +#define CARDBUS_CIS_PTR_REG 0x28 +#define PCI_SUB_SYSTEM_ID_REG 0x2c +#define PCI_EXP_ROM_ADDR_REG 0x30 +#define PCI_CAP_PTR_REG 0x34 +#define PCI_LGPL_REG 0x3C /* max Latency, min Gnt, interrupt + * Pin, interrupt Line */ + +struct pci_master_request { + volatile u32_t pci_address; /* must be 4-byte aligned */ + volatile u32_t data; /* must be 4-byte aligned */ + volatile u8_t cmd; + volatile u8_t byte_valid; + volatile u8_t status; +}; + +struct pci_devnode { + struct devtree_node dn; + u32_t pci_idsel_0; + u32_t pci_idsel_1; + u32_t pci_cpu_address; + struct pci_master_request volatile *volatile req; +}; + +static struct pci_master_request req; /* globally used for faster master write + * (discarding result when possible) */ +static struct pci_devnode *pci_node; + +#if !defined(CONFIG_DEBUG_PCIMEASURE) +#define PCI_DECLARE_MEASUREMENT +#define PCI_MEASUREMENT_START() +#define PCI_MEASUREMENT_END(idx) +#else +#define PCI_DECLARE_MEASUREMENT \ + int __diff; \ + unsigned int __tstart; + +#define PCI_MEASUREMENT_START() \ + __tstart = UBICOM32_IO_TIMER->sysval; + +#define PCI_MEASUREMENT_END(idx) \ + __diff = (int)UBICOM32_IO_TIMER->sysval - (int)__tstart; \ + pci_measurement_update((idx), __diff); + +#define PCI_WEIGHT 32 + +struct pci_measurement { + volatile unsigned int min; + volatile unsigned int avg; + volatile unsigned int max; +}; + +enum pci_measurement_list { + PCI_MEASUREMENT_READ32, + PCI_MEASUREMENT_WRITE32, + PCI_MEASUREMENT_READ16, + PCI_MEASUREMENT_WRITE16, + PCI_MEASUREMENT_READ8, + PCI_MEASUREMENT_WRITE8, + PCI_MEASUREMENT_LAST, +}; + +static const char *pci_measurement_name_list[PCI_MEASUREMENT_LAST] = { + "READ32", + "WRITE32", + "READ16", + "WRITE16", + "READ8", + "WRITE8" +}; +static struct pci_measurement pci_measurements[PCI_MEASUREMENT_LAST]; + +/* + * pci_measurement_update() + * Update an entry in the measurement array for this idx. + */ +static void pci_measurement_update(int idx, int sample) +{ + struct pci_measurement *pm = &pci_measurements[idx]; + if ((pm->min == 0) || (pm->min > sample)) { + pm->min = sample; + } + if (pm->max < sample) { + pm->max = sample; + } + pm->avg = ((pm->avg * (PCI_WEIGHT - 1)) + sample) / PCI_WEIGHT; +} +#endif + +#if defined(PCI_USE_INTERNAL_LOCK) +/* + * pci_lock_release() + * Release the PCI lock. + */ +static void pci_lock_release(unsigned long irqflag) +{ + UBICOM32_UNLOCK(PCI_LOCK_BIT); +} + +/* + * pci_lock_acquire() + * Acquire the PCI lock, spin if not available. + */ +static void pci_lock_acquire(unsigned long irqflag) +{ + UBICOM32_LOCK(PCI_LOCK_BIT); +} +#endif + +/* + * pci_set_hrt_interrupt() + */ +static inline void pci_set_hrt_interrupt(struct pci_devnode *pci_node) +{ + ubicom32_set_interrupt(pci_node->dn.sendirq); +} + +/* + * pci_read_u32() + * Synchronously read 32 bits from PCI space. + */ +u8 pci_read_u32(u8 pci_cmd, u32 address, u32 *data) +{ + u8 status; + unsigned long irqflag; + + + /* + * Fill in the request. + */ + volatile struct pci_master_request lreq; + PCI_DECLARE_MEASUREMENT; + + lreq.pci_address = address; + lreq.cmd = pci_cmd; + lreq.byte_valid = 0xf; /* enable all bytes */ + + /* + * Wait for any previous request to complete and then make this request. + */ + PCI_MEASUREMENT_START(); + PCI_LOCK(&pci_master_lock, irqflag); + while (unlikely(pci_node->req == &req)) + ; + pci_node->req = &lreq; + pci_set_hrt_interrupt(pci_node); + PCI_UNLOCK(&pci_master_lock, irqflag); + + /* + * Wait for the result to show up. + */ + while (unlikely(pci_node->req == &lreq)) + ; + status = lreq.status; + if (likely(status == PCI_RESP_OK)) + *data = le32_to_cpu(lreq.data); + else + *data = 0; + PCI_MEASUREMENT_END(PCI_MEASUREMENT_READ32); + return status; +} + +/* + * pci_write_u32() + * Asyncrhnously or synchronously write 32 bits to PCI master space. + */ +u8 pci_write_u32(u8 pci_cmd, u32 address, u32 data) +{ + unsigned long irqflag; + PCI_DECLARE_MEASUREMENT; + + /* + * Wait for any previous write or pending read to complete. + * + * We use a global data block because once we write the request + * we do not wait for it to complete before exiting. + */ + PCI_MEASUREMENT_START(); + PCI_LOCK(&pci_master_lock, irqflag); + while (unlikely(pci_node->req == &req)) + ; + req.pci_address = address; + req.data = cpu_to_le32(data); + req.cmd = pci_cmd; + req.byte_valid = 0xf; /* enable all bytes */ + pci_node->req = &req; + pci_set_hrt_interrupt(pci_node); + PCI_UNLOCK(&pci_master_lock, irqflag); + PCI_MEASUREMENT_END(PCI_MEASUREMENT_WRITE32); + return PCI_RESP_OK; +} + +/* + * pci_read_u16() + * Synchronously read 16 bits from PCI space. + */ +u8 pci_read_u16(u8 pci_cmd, u32 address, u16 *data) +{ + u8 status; + unsigned long irqflag; + + /* + * Fill in the request. + */ + volatile struct pci_master_request lreq; + PCI_DECLARE_MEASUREMENT; + + lreq.pci_address = address & ~2; + lreq.cmd = pci_cmd; + lreq.byte_valid = (address & 2) ? 0xc : 0x3; + + /* + * Wait for any previous request to complete and then make this request. + */ + PCI_MEASUREMENT_START(); + PCI_LOCK(&pci_master_lock, irqflag); + while (unlikely(pci_node->req == &req)) + ; + pci_node->req = &lreq; + pci_set_hrt_interrupt(pci_node); + PCI_UNLOCK(&pci_master_lock, irqflag); + + /* + * Wait for the result to show up. + */ + while (unlikely(pci_node->req == &lreq)) + ; + status = lreq.status; + if (likely(status == PCI_RESP_OK)) { + lreq.data = le32_to_cpu(lreq.data); + *data = (u16)((address & 2) ? (lreq.data >> 16) : lreq.data); + } else + *data = 0; + PCI_MEASUREMENT_END(PCI_MEASUREMENT_READ16); + return status; +} + +/* + * pci_write_u16() + * Asyncrhnously or synchronously write 16 bits to PCI master space. + */ +u8 pci_write_u16(u8 pci_cmd, u32 address, u16 data) +{ + unsigned long irqflag; + PCI_DECLARE_MEASUREMENT; + + /* + * Wait for any previous write or pending read to complete. + * + * We use a global data block because once we write the request + * we do not wait for it to complete before exiting. + */ + PCI_MEASUREMENT_START(); + PCI_LOCK(&pci_master_lock, irqflag); + while (unlikely(pci_node->req == &req)) + ; + req.pci_address = address & ~2; + req.data = (u32)data; + req.data = cpu_to_le32((address & 2) ? (req.data << 16) : req.data); + req.cmd = pci_cmd; + req.byte_valid = (address & 2) ? 0xc : 0x3; + pci_node->req = &req; + pci_set_hrt_interrupt(pci_node); + PCI_UNLOCK(&pci_master_lock, irqflag); + PCI_MEASUREMENT_END(PCI_MEASUREMENT_WRITE16); + return PCI_RESP_OK; +} + +/* + * pci_read_u8() + * Synchronously read 8 bits from PCI space. + */ +u8 pci_read_u8(u8 pci_cmd, u32 address, u8 *data) +{ + u8 status; + unsigned long irqflag; + + /* + * Fill in the request. + */ + volatile struct pci_master_request lreq; + PCI_DECLARE_MEASUREMENT; + + lreq.pci_address = address & ~3; + lreq.cmd = pci_cmd; + lreq.byte_valid = 1 << (address & 0x3); + + /* + * Wait for any previous request to complete and then make this request. + */ + PCI_MEASUREMENT_START(); + PCI_LOCK(&pci_master_lock, irqflag); + while (unlikely(pci_node->req == &req)) + ; + pci_node->req = &lreq; + pci_set_hrt_interrupt(pci_node); + PCI_UNLOCK(&pci_master_lock, irqflag); + + /* + * Wait for the result to show up. + */ + while (unlikely(pci_node->req == &lreq)) + ; + status = lreq.status; + if (likely(status == PCI_RESP_OK)) { + *data = (u8)(lreq.data >> (24 - ((address & 0x3) << 3))); + } else + *data = 0; + PCI_MEASUREMENT_END(PCI_MEASUREMENT_READ8); + return status; +} + +/* + * pci_write_u8() + * Asyncrhnously or synchronously write 8 bits to PCI master space. + */ +u8 pci_write_u8(u8 pci_cmd, u32 address, u8 data) +{ + unsigned long irqflag; + PCI_DECLARE_MEASUREMENT; + + /* + * Wait for any previous write or pending read to complete. + * + * We use a global data block because once we write the request + * we do not wait for it to complete before exiting. + */ + PCI_MEASUREMENT_START(); + PCI_LOCK(&pci_master_lock, irqflag); + while (unlikely(pci_node->req == &req)) + ; + req.pci_address = address & ~3; + req.data = ((u32)data << (24 - ((address & 0x3) << 3))); + req.cmd = pci_cmd; + req.byte_valid = 1 << (address & 0x3); + pci_node->req = &req; + pci_set_hrt_interrupt(pci_node); + PCI_UNLOCK(&pci_master_lock, irqflag); + PCI_MEASUREMENT_END(PCI_MEASUREMENT_WRITE8); + return PCI_RESP_OK; +} + +unsigned int ubi32_pci_read_u32(const volatile void __iomem *addr) +{ + unsigned int data; + pci_read_u32(PCI_CMD_MEM_READ, (u32)addr, &data); + return data; +} +EXPORT_SYMBOL(ubi32_pci_read_u32); + +unsigned short ubi32_pci_read_u16(const volatile void __iomem *addr) +{ + unsigned short data; + pci_read_u16(PCI_CMD_MEM_READ, (u32)addr, &data); + return data; +} +EXPORT_SYMBOL(ubi32_pci_read_u16); + +unsigned char ubi32_pci_read_u8(const volatile void __iomem *addr) +{ + unsigned char data; + pci_read_u8(PCI_CMD_MEM_READ, (u32)addr, &data); + return data; +} +EXPORT_SYMBOL(ubi32_pci_read_u8); + +void ubi32_pci_write_u32(unsigned int val, const volatile void __iomem *addr) +{ + pci_write_u32(PCI_CMD_MEM_WRITE, (u32)addr, val); +} +EXPORT_SYMBOL(ubi32_pci_write_u32); + +void ubi32_pci_write_u16(unsigned short val, const volatile void __iomem *addr) +{ + pci_write_u16(PCI_CMD_MEM_WRITE, (u32)addr, val); +} +EXPORT_SYMBOL(ubi32_pci_write_u16); + +void ubi32_pci_write_u8(unsigned char val, const void volatile __iomem *addr) +{ + pci_write_u8(PCI_CMD_MEM_WRITE, (u32)addr, val); +} +EXPORT_SYMBOL(ubi32_pci_write_u8); + +#if defined(CONFIG_DEBUG_PCIMEASURE) +static unsigned int pci_cycles_to_nano(unsigned int cycles, unsigned int frequency) +{ + unsigned int nano = ((cycles * 1000) / (frequency / 1000000)); + return nano; +} + +/* + * pci_measurement_show() + * Print out the min, avg, max values for each PCI transaction type. + * + * By request, the max value is reset after each dump. + */ +static int pci_measurement_show(struct seq_file *p, void *v) +{ + unsigned int min, avg, max; + unsigned int freq = processor_frequency(); + int trans = *((loff_t *) v); + + if (trans == 0) { + seq_puts(p, "min\tavg\tmax\t(nano-seconds)\n"); + } + + if (trans >= PCI_MEASUREMENT_LAST) { + return 0; + } + + min = pci_cycles_to_nano(pci_measurements[trans].min, freq); + avg = pci_cycles_to_nano(pci_measurements[trans].avg, freq); + max = pci_cycles_to_nano(pci_measurements[trans].max, freq); + pci_measurements[trans].max = 0; + seq_printf(p, "%u\t%u\t%u\t%s\n", min, avg, max, pci_measurement_name_list[trans]); + return 0; +} + +static void *pci_measurement_start(struct seq_file *f, loff_t *pos) +{ + return (*pos < PCI_MEASUREMENT_LAST) ? pos : NULL; +} + +static void *pci_measurement_next(struct seq_file *f, void *v, loff_t *pos) +{ + (*pos)++; + if (*pos >= PCI_MEASUREMENT_LAST) + return NULL; + return pos; +} + +static void pci_measurement_stop(struct seq_file *f, void *v) +{ + /* Nothing to do */ +} + +static const struct seq_operations pci_measurement_seq_ops = { + .start = pci_measurement_start, + .next = pci_measurement_next, + .stop = pci_measurement_stop, + .show = pci_measurement_show, +}; + +static int pci_measurement_open(struct inode *inode, struct file *filp) +{ + return seq_open(filp, &pci_measurement_seq_ops); +} + +static const struct file_operations pci_measurement_fops = { + .open = pci_measurement_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release, +}; + +static int __init pci_measurement_init(void) +{ + proc_create("pci_measurements", 0, NULL, &pci_measurement_fops); + return 0; +} +module_init(pci_measurement_init); +#endif + +static int ubi32_pci_read_config(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 *value) +{ + u8 cmd; + u32 addr; + u8 data8; + u16 data16; + + u8 slot = PCI_SLOT(devfn); + u8 fn = PCI_FUNC(devfn); + + if (slot > 1) { + return PCIBIOS_DEVICE_NOT_FOUND; + } else if (slot == 0) { + addr = PCI_DEV0_IDSEL + where; + } else { + addr = PCI_DEV1_IDSEL + where; + } + + addr += (fn << 8); + + cmd = PCI_CMD_CFG_READ; + if (size == 1) { + pci_read_u8(cmd, addr, &data8); + *value = (u32)data8; + } else if (size == 2) { + pci_read_u16(cmd, addr, &data16); + *value = (u32)data16; + } else { + pci_read_u32(cmd, addr, value); + } + + return PCIBIOS_SUCCESSFUL; +} + +static int ubi32_pci_write_config(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 value) +{ + u8 cmd; + u32 addr; + u8 slot = PCI_SLOT(devfn); + u8 fn = PCI_FUNC(devfn); + + if (slot > 1) { + return PCIBIOS_DEVICE_NOT_FOUND; + } else if (slot == 0) { + addr = PCI_DEV0_IDSEL + where; + } else { + addr = PCI_DEV1_IDSEL + where; + } + + addr += (fn << 8); + + cmd = PCI_CMD_CFG_WRITE; + if (size == 1) { + pci_write_u8(cmd, addr, (u8)value); + } else if (size == 2) { + pci_write_u16(cmd, addr, (u16)value); + } else { + pci_write_u32(cmd, addr, value); + } + + return PCIBIOS_SUCCESSFUL; +} + +int pci_set_dma_max_seg_size(struct pci_dev *dev, unsigned int size) +{ + return -EIO; +} +EXPORT_SYMBOL(pci_set_dma_max_seg_size); + +int pci_set_dma_seg_boundary(struct pci_dev *dev, unsigned long mask) +{ + return -EIO; +} +EXPORT_SYMBOL(pci_set_dma_seg_boundary); + +void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen) +{ + resource_size_t start = pci_resource_start(dev, bar); + resource_size_t len = pci_resource_len(dev, bar); + unsigned long flags = pci_resource_flags(dev, bar); + + if (!len || !start) { + return NULL; + } + + if (maxlen && len > maxlen) { + len = maxlen; + } + + if (flags & IORESOURCE_IO) { + return ioport_map(start, len); + } + + if (flags & IORESOURCE_MEM) { + if (flags & IORESOURCE_CACHEABLE) { + return ioremap(start, len); + } + return ioremap_nocache(start, len); + } + return NULL; +} +EXPORT_SYMBOL(pci_iomap); + +void pci_iounmap(struct pci_dev *dev, void __iomem *addr) +{ + if ((unsigned long)addr >= VMALLOC_START && + (unsigned long)addr < VMALLOC_END) { + iounmap(addr); + } +} +EXPORT_SYMBOL(pci_iounmap); + +/* + * From arch/arm/kernel/bios32.c + * + * PCI bios-type initialisation for PCI machines + * + * Bits taken from various places. + */ +static void __init pcibios_init_hw(struct hw_pci *hw) +{ + struct pci_sys_data *sys = NULL; + int ret; + int nr, busnr; + + for (nr = busnr = 0; nr < hw->nr_controllers; nr++) { + sys = kzalloc(sizeof(struct pci_sys_data), GFP_KERNEL); + if (!sys) + panic("PCI: unable to allocate sys data!"); + + sys->hw = hw; + sys->busnr = busnr; + sys->map_irq = hw->map_irq; + sys->resource[0] = &ioport_resource; + sys->resource[1] = &iomem_resource; + + ret = hw->setup(nr, sys); + + if (ret > 0) { + sys->bus = hw->scan(nr, sys); + + if (!sys->bus) + panic("PCI: unable to scan bus!"); + + busnr = sys->bus->subordinate + 1; + + list_add(&sys->node, &hw->buses); + } else { + kfree(sys); + if (ret < 0) + break; + } + } +} + +/* + * Swizzle the device pin each time we cross a bridge. + * This might update pin and returns the slot number. + */ +static u8 __devinit pcibios_swizzle(struct pci_dev *dev, u8 *pin) +{ + struct pci_sys_data *sys = dev->sysdata; + int slot = 0, oldpin = *pin; + + if (sys->swizzle) + slot = sys->swizzle(dev, pin); + + if (debug_pci) + printk("PCI: %s swizzling pin %d => pin %d slot %d\n", + pci_name(dev), oldpin, *pin, slot); + return slot; +} + +/* + * Map a slot/pin to an IRQ. + */ +static int pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + struct pci_sys_data *sys = dev->sysdata; + int irq = -1; + + if (sys->map_irq) + irq = sys->map_irq(dev, slot, pin); + + if (debug_pci) + printk("PCI: %s mapping slot %d pin %d => irq %d\n", + pci_name(dev), slot, pin, irq); + + return irq; +} + +void __init pci_common_init(struct hw_pci *hw) +{ + struct pci_sys_data *sys; + + INIT_LIST_HEAD(&hw->buses); + + if (hw->preinit) + hw->preinit(); + pcibios_init_hw(hw); + if (hw->postinit) + hw->postinit(); + + pci_fixup_irqs(pcibios_swizzle, pcibios_map_irq); + list_for_each_entry(sys, &hw->buses, node) { + struct pci_bus *bus = sys->bus; + /* + * Size the bridge windows. + */ + pci_bus_size_bridges(bus); + /* + * Assign resources. + */ + pci_bus_assign_resources(bus); + + /* + * Tell drivers about devices found. + */ + pci_bus_add_devices(bus); + } +} + +char * __init pcibios_setup(char *str) +{ + if (!strcmp(str, "debug")) { + debug_pci = 1; + return NULL; + } + return str; +} + +/* + * From arch/i386/kernel/pci-i386.c: + * + * We need to avoid collisions with `mirrored' VGA ports + * and other strange ISA hardware, so we always want the + * addresses to be allocated in the 0x000-0x0ff region + * modulo 0x400. + * + * Why? Because some silly external IO cards only decode + * the low 10 bits of the IO address. The 0x00-0xff region + * is reserved for motherboard devices that decode all 16 + * bits, so it's ok to allocate at, say, 0x2800-0x28ff, + * but we want to try to avoid allocating at 0x2900-0x2bff + * which might be mirrored at 0x0100-0x03ff.. + */ +void pcibios_align_resource(void *data, struct resource *res, + resource_size_t size, resource_size_t align) +{ + resource_size_t start = res->start; + + if (res->flags & IORESOURCE_IO && start & 0x300) + start = (start + 0x3ff) & ~0x3ff; + + res->start = (start + align - 1) & ~(align - 1); +} + + +void __devinit pcibios_update_irq(struct pci_dev *dev, int irq) +{ + if (debug_pci) + printk("PCI: Assigning IRQ %02d to %s\n", irq, pci_name(dev)); + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); +} + +/* + * If the bus contains any of these devices, then we must not turn on + * parity checking of any kind. Currently this is CyberPro 20x0 only. + */ +static inline int pdev_bad_for_parity(struct pci_dev *dev) +{ + return (dev->vendor == PCI_VENDOR_ID_INTERG && + (dev->device == PCI_DEVICE_ID_INTERG_2000 || + dev->device == PCI_DEVICE_ID_INTERG_2010)) || + (dev->vendor == PCI_VENDOR_ID_ITE && + dev->device == PCI_DEVICE_ID_ITE_8152); + +} + +/* + * Adjust the device resources from bus-centric to Linux-centric. + */ +static void __devinit +pdev_fixup_device_resources(struct pci_sys_data *root, struct pci_dev *dev) +{ + resource_size_t offset; + int i; + + for (i = 0; i < PCI_NUM_RESOURCES; i++) { + if (dev->resource[i].start == 0) + continue; + if (dev->resource[i].flags & IORESOURCE_MEM) + offset = root->mem_offset; + else + offset = root->io_offset; + + dev->resource[i].start += offset; + dev->resource[i].end += offset; + } +} + +static void __devinit +pbus_assign_bus_resources(struct pci_bus *bus, struct pci_sys_data *root) +{ + struct pci_dev *dev = bus->self; + int i; + + if (!dev) { + /* + * Assign root bus resources. + */ + for (i = 0; i < 3; i++) + bus->resource[i] = root->resource[i]; + } +} + +/* + * pcibios_fixup_bus - Called after each bus is probed, + * but before its children are examined. + */ +void pcibios_fixup_bus(struct pci_bus *bus) +{ + struct pci_sys_data *root = bus->sysdata; + struct pci_dev *dev; + u16 features = PCI_COMMAND_SERR | PCI_COMMAND_PARITY | + PCI_COMMAND_FAST_BACK; + + pbus_assign_bus_resources(bus, root); + + /* + * Walk the devices on this bus, working out what we can + * and can't support. + */ + list_for_each_entry(dev, &bus->devices, bus_list) { + u16 status; + + pdev_fixup_device_resources(root, dev); + + pci_read_config_word(dev, PCI_STATUS, &status); + + /* + * If any device on this bus does not support fast back + * to back transfers, then the bus as a whole is not able + * to support them. Having fast back to back transfers + * on saves us one PCI cycle per transaction. + */ + if (!(status & PCI_STATUS_FAST_BACK)) + features &= ~PCI_COMMAND_FAST_BACK; + + if (pdev_bad_for_parity(dev)) + features &= ~(PCI_COMMAND_SERR | PCI_COMMAND_PARITY); + + switch (dev->class >> 8) { + case PCI_CLASS_BRIDGE_PCI: + pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &status); + status |= PCI_BRIDGE_CTL_PARITY | + PCI_BRIDGE_CTL_MASTER_ABORT; + status &= ~(PCI_BRIDGE_CTL_BUS_RESET | + PCI_BRIDGE_CTL_FAST_BACK); + pci_write_config_word(dev, PCI_BRIDGE_CONTROL, status); + break; + + case PCI_CLASS_BRIDGE_CARDBUS: + pci_read_config_word(dev, PCI_CB_BRIDGE_CONTROL, + &status); + status |= PCI_CB_BRIDGE_CTL_PARITY | + PCI_CB_BRIDGE_CTL_MASTER_ABORT; + pci_write_config_word(dev, PCI_CB_BRIDGE_CONTROL, + status); + break; + } + } + + /* + * Now walk the devices again, this time setting them up. + */ + list_for_each_entry(dev, &bus->devices, bus_list) { + u16 cmd; + + pci_read_config_word(dev, PCI_COMMAND, &cmd); + cmd |= features; + pci_write_config_word(dev, PCI_COMMAND, cmd); + + pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, + L1_CACHE_BYTES >> 2); + } + + /* + * Propagate the flags to the PCI bridge. + */ + if (bus->self && bus->self->hdr_type == PCI_HEADER_TYPE_BRIDGE) { + if (features & PCI_COMMAND_FAST_BACK) + bus->bridge_ctl |= PCI_BRIDGE_CTL_FAST_BACK; + if (features & PCI_COMMAND_PARITY) + bus->bridge_ctl |= PCI_BRIDGE_CTL_PARITY; + } + + /* + * Report what we did for this bus + */ + printk(KERN_INFO "PCI: bus%d: Fast back to back transfers %sabled\n", + bus->number, (features & PCI_COMMAND_FAST_BACK) ? "en" : "dis"); +} +/* + * Convert from Linux-centric to bus-centric addresses for bridge devices. + */ +void +pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, + struct resource *res) +{ + struct pci_sys_data *root = dev->sysdata; + unsigned long offset = 0; + + if (res->flags & IORESOURCE_IO) + offset = root->io_offset; + if (res->flags & IORESOURCE_MEM) + offset = root->mem_offset; + + region->start = res->start - offset; + region->end = res->end - offset; +} + +void __devinit +pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, + struct pci_bus_region *region) +{ + struct pci_sys_data *root = dev->sysdata; + unsigned long offset = 0; + + if (res->flags & IORESOURCE_IO) + offset = root->io_offset; + if (res->flags & IORESOURCE_MEM) + offset = root->mem_offset; + + res->start = region->start + offset; + res->end = region->end + offset; +} + +#ifdef CONFIG_HOTPLUG +EXPORT_SYMBOL(pcibios_fixup_bus); +EXPORT_SYMBOL(pcibios_resource_to_bus); +EXPORT_SYMBOL(pcibios_bus_to_resource); +#endif + +/** + * pcibios_enable_device - Enable I/O and memory. + * @dev: PCI device to be enabled + */ +int pcibios_enable_device(struct pci_dev *dev, int mask) +{ + u16 cmd, old_cmd; + int idx; + struct resource *r; + + pci_read_config_word(dev, PCI_COMMAND, &cmd); + old_cmd = cmd; + for (idx = 0; idx < 6; idx++) { + /* Only set up the requested stuff */ + if (!(mask & (1 << idx))) + continue; + + r = dev->resource + idx; + if (!r->start && r->end) { + printk(KERN_ERR "PCI: Device %s not available because" + " of resource collisions\n", pci_name(dev)); + return -EINVAL; + } + if (r->flags & IORESOURCE_IO) + cmd |= PCI_COMMAND_IO; + if (r->flags & IORESOURCE_MEM) + cmd |= PCI_COMMAND_MEMORY; + } + + /* + * Bridges (eg, cardbus bridges) need to be fully enabled + */ + if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE) + cmd |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY; + + if (cmd != old_cmd) { + printk("PCI: enabling device %s (%04x -> %04x)\n", + pci_name(dev), old_cmd, cmd); + pci_write_config_word(dev, PCI_COMMAND, cmd); + } + return 0; +} + + +struct pci_ops ubi32_pci_ops = { + .read = ubi32_pci_read_config, + .write = ubi32_pci_write_config, +}; + +static struct pci_bus *ubi32_pci_scan_bus(int nr, struct pci_sys_data *sys) +{ + return pci_scan_bus(sys->busnr, &ubi32_pci_ops, sys); +} + +#define UBI32_PCI_MEM_BASE PCI_DEV_REG_BASE +#define UBI32_PCI_MEM_LEN 0x80000000 + +#define UBI32_PCI_IO_BASE 0x0 +#define UBI32_PCI_IO_END 0x0 + +static struct resource ubi32_pci_mem = { + .name = "PCI memory space", + .start = UBI32_PCI_MEM_BASE, + .end = UBI32_PCI_MEM_BASE + UBI32_PCI_MEM_LEN - 1, + .flags = IORESOURCE_MEM, +}; + +static struct resource ubi32_pci_io = { + .name = "PCI IO space", + .start = UBI32_PCI_IO_BASE, + .end = UBI32_PCI_IO_END, + .flags = IORESOURCE_IO, +}; + +static int __init ubi32_pci_setup(int nr, struct pci_sys_data *sys) +{ + if (nr > 0) + return 0; + + request_resource(&iomem_resource, &ubi32_pci_mem); + request_resource(&ioport_resource, &ubi32_pci_io); + + sys->resource[0] = &ubi32_pci_io; + sys->resource[1] = &ubi32_pci_mem; + sys->resource[2] = NULL; + + return 1; +} + +static void __init ubi32_pci_preinit(void) +{ +} + +static int __init ubi32_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + return pci_node->dn.recvirq; +} + +struct hw_pci ubi32_pci __initdata = { + .nr_controllers = 1, + .preinit = ubi32_pci_preinit, + .setup = ubi32_pci_setup, + .scan = ubi32_pci_scan_bus, + .map_irq = ubi32_pci_map_irq, +}; + +static int __init ubi32_pci_init(void) +{ + pci_node = (struct pci_devnode *)devtree_find_node("pci"); + if (pci_node == NULL) { + printk(KERN_WARNING "PCI init failed\n"); + return -ENOSYS; + } + pci_common_init(&ubi32_pci); + return 0; +} + +subsys_initcall(ubi32_pci_init); + +/* + * workaround for dual PCI card interrupt + */ +#define PCI_COMMON_INT_BIT (1 << 19) +void ubi32_pci_int_wr(void) +{ + volatile unsigned int pci_int_line; + pci_int_line = UBICOM32_IO_PORT(RB)->gpio_in; + if (!(pci_int_line & PCI_COMMON_INT_BIT)) + { + ubicom32_set_interrupt(pci_node->dn.recvirq); + } +} +EXPORT_SYMBOL(ubi32_pci_int_wr); diff --git a/target/linux/ubicom32/files/arch/ubicom32/mach-common/plio.c b/target/linux/ubicom32/files/arch/ubicom32/mach-common/plio.c new file mode 100644 index 0000000000..ac26a1e8d4 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/mach-common/plio.c @@ -0,0 +1,92 @@ +/* + * plio.c + * PLIO state machine support functions + * + * Copyright © 2009 Ubicom Inc. <www.ubicom.com>. All rights reserved. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can + * redistribute it and/or modify it under the terms of the GNU General + * Public License as published by the Free Software Foundation, either + * version 2 of the License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + */ + +#include <linux/types.h> +#include <linux/string.h> +#include <linux/delay.h> +#include <asm/plio.h> + +/* + * plio_reset + * Select and reset PLIO function + */ +static void plio_reset(const plio_fctl_t *plio_fctl) { + plio_io_function_t plio_function = { + .fn_sel = PLIO_FN, + .fn_reset = 1, + }; + + /* + * enable extension port + */ + PEXT_NBR->function = plio_function; + + /* + * program clock dividers + */ + PLIO_NBR->fctl2 = plio_fctl->fctl2; + + /* + * select plio function and assert function reset + */ + plio_function.br_thread = thread_get_self(); + plio_function.fn_reset = 1; + PLIO_NBR->function = plio_function; + + /* + * program plio controls + */ + PLIO_NBR->fctl0 = plio_fctl->fctl0; + PLIO_NBR->fctl1 = plio_fctl->fctl1; + + /* + * deassert function reset + */ + plio_function.fn_reset = 0; + PLIO_NBR->function = plio_function; +} + +/* + * plio_init + * configure and initialize PLIO. + */ +void plio_init(const plio_fctl_t *plio_fctl, const plio_config_t *plio_config, const plio_sram_t plio_sram_cfg[], int sram_cfg_size){ + /* + * first reset to start plio clock + */ + plio_reset(plio_fctl); + + udelay(1); + + /* + * configure pfsm + */ + PLIO_NBR->fctl0.pfsm_prog = 1; + memcpy(PLIO_BR->pfsm_sram, plio_sram_cfg, sram_cfg_size); + PLIO_NBR->fctl0.pfsm_prog = 0; + + /* + * program rest of plio + */ + memcpy(&PLIO_BR->config, plio_config, sizeof(plio_config_t)); +} diff --git a/target/linux/ubicom32/files/arch/ubicom32/mach-common/profile.c b/target/linux/ubicom32/files/arch/ubicom32/mach-common/profile.c new file mode 100644 index 0000000000..c95de6b17d --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/mach-common/profile.c @@ -0,0 +1,549 @@ +/* + * arch/ubicom32/mach-common/profile.c + * Implementation for Ubicom32 Profiler + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + */ + +#include <linux/platform_device.h> +#include "profile.h" +#include <linux/seq_file.h> +#include <linux/proc_fs.h> +#include <linux/mm.h> +#include <linux/mmzone.h> +#include <linux/fs.h> +#include <linux/page-flags.h> +#include <asm/uaccess.h> +#include <asm/devtree.h> +#include <asm/profilesample.h> +#include <asm/memory_map.h> +#include <asm/page.h> +#include <asm/ip5000.h> + +/* + * spacs for all memory blocks so we can hold locks for short time when walking tables + */ +#define PROFILE_NUM_MAPS 5000 +static struct profile_map profile_pm[PROFILE_NUM_MAPS]; + +static struct profilenode *node = NULL; +static int profile_first_packet = 1; + +static int profile_open(struct inode *inode, struct file *filp) +{ + if (!node) { + return -ENOENT; + } + node->busy = 1; + if (!node->enabled) { + node->enabled = 1; + node->busy = 0; + profile_first_packet = 1; + return 0; + } + node->busy = 0; + return -EBUSY; +} + +static int profile_sequence_num; + +/* + * make a packet full of sample data + */ +static int profile_make_data_packet(char *buf, int count) +{ + int samples; /* number of samples requested */ + int i; + struct profile_header ph; + char *ptr; + + if (count < sizeof(struct profile_header) + sizeof(struct profile_sample)) { + return -EINVAL; + } + + /* + * fill in the packet header + */ + memset(&ph, 0, sizeof(struct profile_header)); + ph.magic = PROF_MAGIC + PROFILE_VERSION; + ph.header_size = sizeof(struct profile_header); + ph.clocks = node->clocks; + for (i = 0; i < PROFILE_MAX_THREADS; ++i) { + ph.instruction_count[i] = node->inst_count[i]; + } + ph.profile_instructions = 0; + ph.enabled = node->enabled_threads; + ph.hrt = node->hrt; + ph.high = 0; + ph.profiler_thread = node->profiler_thread; + ph.clock_freq = node->clock_freq; + ph.seq_num = profile_sequence_num++; + ph.cpu_id = node->cpu_id; + ph.perf_counters[0] = node->stats[0]; + ph.perf_counters[1] = node->stats[1]; + ph.perf_counters[2] = node->stats[2]; + ph.perf_counters[3] = node->stats[3]; + ph.ddr_freq = node->ddr_freq; + + ptr = buf + sizeof(struct profile_header); + + samples = (count - sizeof(struct profile_header)) / sizeof(struct profile_sample); + for (i = 0; i < samples && node->count; ++i) { + if (copy_to_user(ptr, &node->samples[node->tail], sizeof(struct profile_sample)) != 0) { + return -EFAULT; + } + node->count--; + node->tail++; + if (node->tail >= node->max_samples) { + node->tail = 0; + } + ptr += sizeof(struct profile_sample); + } + ph.sample_count = i; + if (copy_to_user(buf, &ph, sizeof(struct profile_header)) != 0) { + return -EFAULT; + } + if (ph.sample_count == 0) + return 0; + else + return sizeof(struct profile_header) + ph.sample_count * sizeof(struct profile_sample); +} + +static void profile_get_memory_stats(unsigned int *total_free, unsigned int *max_free) +{ + struct list_head *p; + struct zone *zone; + unsigned int size; + + *total_free = 0; + *max_free = 0; + + /* + * get all the free regions. In each zone, the array of free_area lists contains the first page of each frame of size 1 << order + */ + for_each_zone(zone) { + unsigned long order, flags, i; + + if (!populated_zone(zone)) + continue; + + if (!is_normal(zone)) + continue; + + spin_lock_irqsave(&zone->lock, flags); + for_each_migratetype_order(order, i) { + size = ((1 << order) << PAGE_SHIFT) >> 10; + list_for_each(p, &(zone->free_area[order].free_list[i])) { + if (size > *max_free) { + *max_free = size; + } + *total_free += size; + } + } + spin_unlock_irqrestore(&zone->lock, flags); + } +} + +struct profile_counter_pkt profile_builtin_stats[] = +{ + { + "Free memory(KB)", 0 + }, + { + "Max free Block(KB)", 0 + } +}; + +/* + * make a packet full of performance counters + */ +static char prof_pkt[PROFILE_MAX_PACKET_SIZE]; +static int profile_make_stats_packet(char *buf, int count) +{ + char *ptr = prof_pkt; + struct profile_header_counters hdr; + int stat_count = 0; + int i; + unsigned int total_free, max_free; + int builtin_count = sizeof(profile_builtin_stats) / sizeof(struct profile_counter_pkt); + + if (count > PROFILE_MAX_PACKET_SIZE) { + count = PROFILE_MAX_PACKET_SIZE; + } + stat_count = (count - sizeof(struct profile_header_counters)) / sizeof (struct profile_counter_pkt); + stat_count -= builtin_count; + + if (stat_count <= 0) { + return 0; + } + + if (stat_count > node->num_counters) { + stat_count = node->num_counters; + } + + hdr.magic = PROF_MAGIC_COUNTERS; + hdr.ultra_sample_time = node->clocks; + hdr.ultra_count = stat_count; + hdr.linux_sample_time = UBICOM32_IO_TIMER->sysval; + hdr.linux_count = builtin_count; + memcpy(ptr, (void *)&hdr, sizeof(struct profile_header_counters)); + ptr += sizeof(struct profile_header_counters); + + + for (i = 0; i < stat_count; ++i) { + memcpy(ptr, (void *)(&(node->counters[i])), sizeof(struct profile_counter)); + ptr += sizeof(struct profile_counter); + } + + /* + * built in statistics + */ + profile_get_memory_stats(&total_free, &max_free); + profile_builtin_stats[0].value = total_free; + profile_builtin_stats[1].value = max_free; + memcpy(ptr, (void *)profile_builtin_stats, sizeof(profile_builtin_stats)); + ptr += sizeof(profile_builtin_stats); + + if (copy_to_user(buf, prof_pkt, ptr - prof_pkt) != 0) { + return -EFAULT; + } + return ptr - prof_pkt; +} + +/* + * return a udp packet ready to send to the profiler tool + * when there are no packets left to make, return 0 + */ +static int profile_read(struct file *filp, char *buf, size_t count, loff_t *f_pos) +{ + int result = 0; + if (!node) { + return -ENOENT; + } + node->busy = 1; + if (!node->enabled) { + node->busy = 0; + return -EPERM; + } + if (!node->samples) { + node->busy = 0; + return -ENOMEM; + } + + if (profile_first_packet) { + result = profile_make_stats_packet(buf, count); + profile_first_packet = 0; + } + if (result == 0) { + result = profile_make_data_packet(buf, count); + if (result == 0) { + profile_first_packet = 1; + } + } + node->busy = 0; + return result; + +} + +static int profile_release(struct inode *inode, struct file *filp) +{ + if (!node) { + return -ENOENT; + } + node->busy = 1; + if (node->enabled) { + node->enabled = 0; + node->count = 0; + node->tail = node->head; + node->busy = 0; + return 0; + } + node->busy = 0; + profile_first_packet = 1; + return -EBADF; +} + +static const struct file_operations profile_fops = { + .open = profile_open, + .read = profile_read, + .release = profile_release, +}; + +static int page_aligned(void *x) +{ + return !((unsigned int)x & ((1 << PAGE_SHIFT) - 1)); +} + +static int profile_maps_open(struct inode *inode, struct file *filp) +{ + struct rb_node *rb; + int num = 0; + int slab_start; + struct vm_area_struct *vma; + int type = PROFILE_MAP_TYPE_UNKNOWN; + int flags, i; + struct list_head *p; + struct zone *zone; + + /* + * get the slab data (first so dups will show up as vmas) + */ + slab_start = num; + num += kmem_cache_block_info("size-512", (struct kmem_cache_size_info *)&profile_pm[num], PROFILE_NUM_MAPS - num); + num += kmem_cache_block_info("size-1024", (struct kmem_cache_size_info *)&profile_pm[num], PROFILE_NUM_MAPS - num); + num += kmem_cache_block_info("size-2048", (struct kmem_cache_size_info *)&profile_pm[num], PROFILE_NUM_MAPS - num); + num += kmem_cache_block_info("size-4096", (struct kmem_cache_size_info *)&profile_pm[num], PROFILE_NUM_MAPS - num); + num += kmem_cache_block_info("size-8192", (struct kmem_cache_size_info *)&profile_pm[num], PROFILE_NUM_MAPS - num); + + for (i = slab_start; i < num; ++i) { + profile_pm[i].type_size |= PROFILE_MAP_TYPE_SMALL << PROFILE_MAP_TYPE_SHIFT; + } + + slab_start = num; + num += kmem_cache_block_info("dentry", (struct kmem_cache_size_info *)&profile_pm[num], PROFILE_NUM_MAPS - num); + num += kmem_cache_block_info("inode_cache", (struct kmem_cache_size_info *)&profile_pm[num], PROFILE_NUM_MAPS - num); + num += kmem_cache_block_info("sysfs_dir_cache", (struct kmem_cache_size_info *)&profile_pm[num], PROFILE_NUM_MAPS - num); + num += kmem_cache_block_info("proc_inode_cache", (struct kmem_cache_size_info *)&profile_pm[num], PROFILE_NUM_MAPS - num); + + for (i = slab_start; i < num; ++i) { + profile_pm[i].type_size |= PROFILE_MAP_TYPE_FS << PROFILE_MAP_TYPE_SHIFT; + } + + /* + * get all the vma regions (allocated by mmap, most likely + */ +#if 0 + down_read(&nommu_vma_sem); + for (rb = rb_first(&nommu_vma_tree); rb && num < PROFILE_NUM_MAPS; rb = rb_next(rb)) { + vma = rb_entry(rb, struct vm_area_struct, vm_rb); + profile_pm[num].start = (vma->vm_start - SDRAMSTART) >> PAGE_SHIFT; + profile_pm[num].type_size = (vma->vm_end - vma->vm_start + (1 << PAGE_SHIFT) - 1) >> PAGE_SHIFT; + flags = vma->vm_flags & 0xf; + if (flags == (VM_READ | VM_EXEC)) { + type = PROFILE_MAP_TYPE_TEXT; + } else if (flags == (VM_READ | VM_WRITE | VM_EXEC)) { + type = PROFILE_MAP_TYPE_STACK; + } else if (flags == (VM_READ | VM_WRITE)) { + type = PROFILE_MAP_TYPE_APP_DATA; + } + profile_pm[num].type_size |= type << PROFILE_MAP_TYPE_SHIFT; + num++; + } + up_read(&nommu_vma_sem); + if (rb) { + return -ENOMEM; + } +#endif + + /* + * get all the free regions. In each zone, the array of free_area lists contains the first page of each frame of size 1 << order + */ + for_each_zone(zone) { + unsigned long order, flags, i; + struct page *page; + + if (!populated_zone(zone)) + continue; + + if (!is_normal(zone)) + continue; + + spin_lock_irqsave(&zone->lock, flags); + for_each_migratetype_order(order, i) { + list_for_each(p, &(zone->free_area[order].free_list[i])) { + page = list_entry(p, struct page, lru); + profile_pm[num].start = ((page_to_phys(page) - SDRAMSTART) >> PAGE_SHIFT) - 0x40; + profile_pm[num].type_size = (PROFILE_MAP_TYPE_FREE << PROFILE_MAP_TYPE_SHIFT) | order; + num++; + if (num >= PROFILE_NUM_MAPS) { + spin_unlock_irqrestore(&zone->lock, flags); + return -ENOMEM; + } + } + } + spin_unlock_irqrestore(&zone->lock, flags); + } + + /* + * get the filesystem inodes + */ + list_for_each(p, &(super_blocks)) { + struct super_block *sb; + struct list_head *q; + if (num >= PROFILE_NUM_MAPS) + break; + sb = list_entry(p, struct super_block, s_list); + if (page_aligned(sb)) { + profile_pm[num].start = ((unsigned int)sb - SDRAMSTART) >> PAGE_SHIFT; + profile_pm[num].type_size = (PROFILE_MAP_TYPE_FS << PROFILE_MAP_TYPE_SHIFT); + num++; + } + list_for_each(q, &(sb->s_inodes)) { + struct inode *in; + if (num >= PROFILE_NUM_MAPS) + break; + in = list_entry(q, struct inode, i_sb_list); + if (page_aligned(in)) { + profile_pm[num].start = ((unsigned int)in - SDRAMSTART) >> PAGE_SHIFT; + profile_pm[num].type_size = (PROFILE_MAP_TYPE_FS << PROFILE_MAP_TYPE_SHIFT); + num++; + } + } + } + + /* + * get the buffer cache pages + */ + for (i = 0; i < num_physpages && num < PROFILE_NUM_MAPS; ++i) { + if ((mem_map + i)->flags & (1 << PG_lru)) { + int start = i; + while ((mem_map + i)->flags & (1 << PG_lru) && i < num_physpages) + i++; + profile_pm[num].start = start; + profile_pm[num].type_size = (i - start) | (PROFILE_MAP_TYPE_CACHE << PROFILE_MAP_TYPE_SHIFT); + num++; + } + } + + filp->private_data = (void *)num; + return 0; +} + +/* + * return one packet of map data, or 0 if all maps have been returned already + */ +static int profile_maps_read(struct file *filp, char *buf, size_t count, loff_t *f_pos) +{ + struct profile_header_maps header; + char *p = buf + sizeof(header); + int total = (int)filp->private_data; + + header.count = (count - sizeof(header)) / sizeof(struct profile_map); + if (header.count > PROFILE_MAX_MAPS) { + header.count = PROFILE_MAX_MAPS;; + } + if (header.count > total - *f_pos) { + header.count = total - *f_pos; + } + + if (header.count == 0) { + return 0; + } + + header.magic = PROF_MAGIC_MAPS; + header.page_shift = PAGE_SHIFT; + + if (copy_to_user(buf, &header, sizeof(header)) != 0) { + return -EFAULT; + } + if (copy_to_user(p, (void *)&profile_pm[*f_pos], sizeof(struct profile_map) * header.count) != 0) { + return -EFAULT; + } + *f_pos += header.count; + + return sizeof(header) + sizeof(struct profile_map) * header.count; +} + +static int profile_maps_release(struct inode *inode, struct file *filp) +{ + return 0; +} + +static const struct file_operations profile_maps_fops = { + .open = profile_maps_open, + .read = profile_maps_read, + .release = profile_maps_release, +}; + +static int profile_rate_show(struct seq_file *m, void *v) +{ + if (node) { + seq_printf(m, "%d samples per second. %d virtual counters.\n", node->rate, node->num_counters); + } else { + seq_printf(m, "Profiler is not initialized.\n"); + } + return 0; +} + +static int profile_rate_open(struct inode *inode, struct file *filp) +{ + return single_open(filp, profile_rate_show, NULL); +} + +static int profile_rate_write(struct file *filp, const char *buf, size_t len, loff_t *off) +{ + *off = 0; + return 0; +} + +static const struct file_operations profile_rate_fops = { + .open = profile_rate_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .write = profile_rate_write, +}; + +int ubi32_profile_init_module(void) +{ + struct proc_dir_entry *pdir; + + /* + * find the device + */ + node = (struct profilenode *)devtree_find_node("profiler"); + if (!node) { + printk(KERN_INFO "Profiler does not exist.\n"); + return -ENODEV; + } + + /* + * allocate the sample buffer + */ + node->max_samples = PROFILE_MAX_SAMPLES; + node->samples = kmalloc(node->max_samples * sizeof(struct profile_sample), GFP_KERNEL); + if (!node->samples) { + printk(KERN_INFO "Profiler sample buffer kmalloc failed.\n"); + return -ENOMEM; + } + + /* + * connect to the file system + */ + pdir = proc_mkdir("profile", NULL); + if (!pdir) { + return -ENOMEM; + } + if (!proc_create("data", 0, pdir, &profile_fops)) { + return -ENOMEM; + } + if (!proc_create("rate", 0, pdir, &profile_rate_fops)) { + return -ENOMEM; + } + if (!proc_create("maps", 0, pdir, &profile_maps_fops)) { + return -ENOMEM; + } + return 0; +} + + +module_init(ubi32_profile_init_module); + +MODULE_AUTHOR("David Fotland"); +MODULE_LICENSE("GPL"); diff --git a/target/linux/ubicom32/files/arch/ubicom32/mach-common/profile.h b/target/linux/ubicom32/files/arch/ubicom32/mach-common/profile.h new file mode 100644 index 0000000000..e6ff7d9fe0 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/mach-common/profile.h @@ -0,0 +1,82 @@ +/* + * arch/ubicom32/mach-common/profile.h + * Private data for the profile module + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ + +#include <linux/types.h> +#include <asm/devtree.h> +#include "profpkt.h" + +#ifndef _PROFILE_H_ +#define _PROFILE_H_ + +#define PROFILE_MAX_THREADS 16 +#define PROFILE_MAX_SAMPLES 1024 + +struct profile_sample; +struct oprofile_sample; + +/* + * values chosen so all counter values fit in a single UDP packet + */ +#define PROFILE_NODE_MAX_COUNTERS 32 + +struct profile_counter { + char name[PROFILE_COUNTER_NAME_LENGTH]; + unsigned int value; +}; + +struct profilenode { + struct devtree_node dn; + volatile u32_t enabled; /* Is the profiler enabled to take samples? */ + volatile u32_t busy; /* set when the samples are being read by the driver */ + volatile u32_t rate; /* What is the sampling rate? */ + volatile u32_t enabled_threads; /* which threads were enabled at the last sample time */ + volatile u32_t hrt; /* HRT threads */ + volatile u32_t profiler_thread; /* thread running the profile sampler */ + volatile u32_t clocks; /* system clock timer at last sample */ + volatile u32_t clock_freq; /* clock frequency in Hz */ + volatile u32_t ddr_freq; /* memory frequency */ + volatile u32_t cpu_id; /* chip_id register */ + volatile u32_t inst_count[PROFILE_MAX_THREADS]; /* sampled instruction counts at most recent sample */ + volatile u32_t stats[4]; /* contents of the cache statistics counters */ + volatile u16_t head; /* sample taker puts samples here */ + volatile u16_t tail; /* packet filler takes samples here */ + volatile u16_t count; /* number of valid samples */ + volatile u16_t max_samples; /* how many samples can be in the samples array */ + struct profile_sample *samples; /* samples array allocated by the linux driver */ + volatile u32_t num_counters; /* how many registered performance counters */ + volatile struct profile_counter counters[PROFILE_NODE_MAX_COUNTERS]; + + /* unimplemented interface for future oprofile work */ + volatile u16_t oprofile_head; /* sample taker puts samples here */ + volatile u16_t oprofile_tail; /* packet filler takes samples here */ + volatile u16_t oprofile_count; /* how many oprofile sampels are are in use */ + volatile u16_t oprofile_max_samples; /* samples array size for oprofile samples */ + struct oprofile_sample *oprofile_samples; /* oprofile sample buffer */ +}; + +#endif diff --git a/target/linux/ubicom32/files/arch/ubicom32/mach-common/profpkt.h b/target/linux/ubicom32/files/arch/ubicom32/mach-common/profpkt.h new file mode 100644 index 0000000000..37d9219a6d --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/mach-common/profpkt.h @@ -0,0 +1,158 @@ + +/* + * arch/ubicom32/mach-common/profpkt.c + * Ubicom32 Profiler packet formats for communication between the linux proc driver and the profiler display tool + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + */ + +#define PROFILE_PORT 51080 +#define PROFILE_POSIX_NAME_LENGTH 32 + +/* + * profile UDP packet format for communicating between ip3k and host + * + * every packet starts with a header, followed by samples. + * samples are only taken for non-hrt threads that are + * active + */ +#define PROF_MAGIC 0x3ea0 +#define PROF_MAGIC_COUNTERS 0x9ea0 +#define PROF_MAGIC_MAPS 0xaea0 + +/* + * Versions (31 max): + * 1 to 4 were before 6.0 release, development versions + * 5 was forward compatible version, shipped with 6.0 and 6.1 + * 6 adds heap packets, and clock_freq to header, shipped with 6.2 + * 7 adds a sequence numbers to check for dropped packets, shipped with 6.3.5 + * 8 adds mqueue timing information, shipped with 6.3.5 + * 9 adds sdram heap size information, shipped with 6.4 + * 10 adds heapmem heap callers and long latency stack traces. shipped with 6.4 + * 11 adds support for Mars (IP5K). shipped with 6.10 + * 12 adds more support for Mars. Shipped with 7.0 + * 13 adds per sample latency measurement. Shipped with 7.2 + * 14 changes the heap format and adds a string packet. Shipped with 7.4 + * 15 adds dsr stats and posix. shipped with 7.6 + * 16 corrects maximum packet count for Ares. ships with 7.9 + * 17 adds a5 register value to sample + */ + +#define PROFILE_VERSION 17 +#define PROFILE_MAX_PACKET_SIZE 1440 + +#define PROFILE_MAX_THREADS 16 + +/* + * each packet starts with a profile_header, then sample_count samples + * samples are gprof samples of pc, the return address, condition codes, and + * active threads + */ +struct profile_header { + u16_t magic; /* magic number and version */ + u8_t header_size; /* number of bytes in profile header */ + u8_t sample_count; /* number of samples in the packet */ + u32_t clocks; /* clock counter value */ + u32_t instruction_count[PROFILE_MAX_THREADS]; + /* instructions executed per thread */ + u32_t profile_instructions; /* instructions executed by profiler mainline */ + u16_t enabled; /* which threads are enabled */ + u16_t hrt; /* which threads are hrt */ + u16_t high; /* which threads are high priority */ + u16_t profiler_thread; /* which thread runs the profiler */ + u32_t heap_free; /* current free on-cihp heap space in bytes */ + u32_t heap_low_water; /* on-chip heap low water mark */ + u32_t netpage_free; /* number of free on-chip net pages */ + u32_t netpage_low_water; /* low water mark on free on-chip netpages */ + u32_t min_sp[PROFILE_MAX_THREADS]; + /* stack pointer values per thread */ + u32_t clock_freq; /* clock frequency (Hz) of system being analyzed */ + u32_t seq_num; /* to detect dropped profiler packets */ + u32_t timing_sequence; /* sample number since boot */ + u32_t timing_interval; /* second per sample timing interval */ + u32_t timing_worst_time; /* duration of longest finction called, in core clocks */ + u32_t timing_function; /* address of longest function */ + u32_t timing_average; /* average time of all functions in last interval */ + u32_t timing_count; /* number of functions called in last interval */ + u32_t extheap_free; /* current free extmem heap space in bytes */ + u32_t extheap_low_water; /* extmem heap low water mark */ + u32_t cpu_id; /* CHIP_ID register contents */ + u32_t perf_counters[4]; /* contents of the CPU performance counters */ + u8_t perf_config[4]; /* what is being counted */ + u32_t ddr_freq; /* DDR clock frequency */ + u32_t extnetpage_free; /* number of free off chip net pages */ + u32_t extnetpage_low_water; /* low water mark on off-chip free netpages */ + u32_t dsr_max_latency; /* max time to process a dsr interrupt, in clocks, since last packet */ + u32_t dsr_ave_latency; /* average dsr latency over last DSR_STATS_RECENT_COUNT interrupts */ + u32_t dsr_count; /* number of dsr interrupts since last packet */ +}; + +struct profile_header_counters { + u16_t magic; + u16_t ultra_count; /* how many ultra counters follow this */ + u32_t ultra_sample_time; /* in chip clocks */ + u32_t linux_count; /* how many linux counters follow this */ + u32_t linux_sample_time; +}; + +/* + * values chosen so all counter values fit in a single 1400 byte UDP packet + */ +#define PROFILE_COUNTER_NAME_LENGTH 20 +#define PROFILE_MAX_COUNTERS ((PROFILE_MAX_PACKET_SIZE - sizeof(struct profile_header_counters)) / (PROFILE_COUNTER_NAME_LENGTH + 4)) + +struct profile_counter_pkt { + char name[PROFILE_COUNTER_NAME_LENGTH]; + unsigned int value; +}; + +/* + * send memory maps from linux to profiler tool + */ + +struct profile_header_maps { + u16_t magic; + u16_t count; + u32_t page_shift; +}; + +#define PROFILE_MAP_NUM_TYPES 32 + +/* types 0-15: size field is order. True size is 2^order */ +#define PROFILE_MAP_TYPE_UNKNOWN 0 +#define PROFILE_MAP_TYPE_FREE 1 +#define PROFILE_MAP_TYPE_SMALL 2 +#define PROFILE_MAP_TYPE_FS 3 +/* types 16-31: size field is pages. True size is (1 << PAGE_SHIFT) * size */ +#define PROFILE_MAP_SIZE_TYPE 16 +#define PROFILE_MAP_TYPE_TEXT 16 +#define PROFILE_MAP_TYPE_STACK 17 +#define PROFILE_MAP_TYPE_APP_DATA 18 +#define PROFILE_MAP_TYPE_CACHE 19 +#define PROFILE_MAP_RESERVED 24 + +#define PROFILE_MAP_TYPE_SHIFT 11 +#define PROFILE_MAP_SIZE_MASK 0x7ff + +struct profile_map { + u16_t start; /* start page number of segment, relative to start of DRAM */ + u16_t type_size; /* type (4 bits) of the segment and size in pages (12 bits) */ +}; + +#define PROFILE_MAX_MAPS (PROFILE_MAX_PACKET_SIZE - sizeof(struct profile_header_maps)) / sizeof(struct profile_map) diff --git a/target/linux/ubicom32/files/arch/ubicom32/mach-common/ring_tio.c b/target/linux/ubicom32/files/arch/ubicom32/mach-common/ring_tio.c new file mode 100644 index 0000000000..9d0f8cd2a6 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/mach-common/ring_tio.c @@ -0,0 +1,123 @@ +/* + * arch/ubicom32/mach-common/ring_tio.c + * Generic initialization for UIO Ubicom32 Ring + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + */ + +#include <linux/platform_device.h> +#include <linux/types.h> + +#include <asm/devtree.h> +#include <asm/ring_tio.h> + +static const char *ring_tio_driver_name = "uio_ubicom32ring"; + +/* + * The number of ring_tio's currently allocated, used for .id + */ +static int __initdata ring_tio_count; + +/* + * The maximum number of resources that the ring_tio will have. + * Currently 3, a register space, and up to 2 interrupts. + */ +#define RING_TIO_MAX_RESOURCES 3 + +/* + * ring_tio_init + * Checks the device tree and instantiates the driver if found + */ +void __init ring_tio_init(const char *node_name) +{ + struct platform_device *pdev; + struct resource *res; + int resource_idx = 0; + struct ring_tio_node *ring_node; + + /* + * Check the device tree for the ring_tio + */ + ring_node = (struct ring_tio_node *)devtree_find_node(node_name); + if (!ring_node) { + printk(KERN_WARNING "Ring TIO '%s' not found\n", node_name); + return; + } + + if (ring_node->version != RING_TIO_NODE_VERSION) { + printk(KERN_WARNING "ring_tio not compatible\n"); + return; + } + + /* + * Dynamically create the platform_device structure and resources + */ + pdev = kzalloc(sizeof(struct platform_device), GFP_KERNEL); + if (!pdev) { + printk(KERN_WARNING "ring_tio could not alloc pdev\n"); + return; + } + + res = kzalloc(sizeof(struct resource) * RING_TIO_MAX_RESOURCES, + GFP_KERNEL); + if (!res) { + kfree(pdev); + printk(KERN_WARNING "ring_tio could not alloc res\n"); + return; + } + + pdev->name = ring_tio_driver_name; + pdev->id = ring_tio_count++; + pdev->resource = res; + + /* + * Fill in the resources and platform data from devtree information + */ + res[resource_idx].start = (u32_t)(ring_node->regs); + res[resource_idx].end = (u32_t)(ring_node->regs); + res[resource_idx].flags = IORESOURCE_MEM; + resource_idx++; + + if (ring_node->dn.sendirq != 0xFF) { + res[resource_idx].start = ring_node->dn.sendirq; + res[resource_idx].flags = IORESOURCE_IRQ; + resource_idx++; + } + + if (ring_node->dn.recvirq != 0xFF) { + res[resource_idx].start = ring_node->dn.recvirq; + res[resource_idx].flags = IORESOURCE_IRQ; + resource_idx++; + } + pdev->num_resources = resource_idx; + + printk(KERN_INFO "RingTIO.%d '%s' found irq=%d/%d regs=%p pdev=%p/%p\n", + ring_tio_count - 1, node_name, ring_node->dn.sendirq, + ring_node->dn.recvirq, ring_node->regs, pdev, res); + + /* + * Try to get the device registered + */ + pdev->dev.platform_data = (void *)node_name; + if (platform_device_register(pdev) < 0) { + printk(KERN_WARNING "Ring failed to register\n"); + kfree(pdev); + kfree(res); + } +} diff --git a/target/linux/ubicom32/files/arch/ubicom32/mach-common/switch-bcm539x-reg.h b/target/linux/ubicom32/files/arch/ubicom32/mach-common/switch-bcm539x-reg.h new file mode 100644 index 0000000000..ca64eb1465 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/mach-common/switch-bcm539x-reg.h @@ -0,0 +1,221 @@ +/* + * arch/ubicom32/mach-common/switch-bcm539x-reg.h + * Broadcom switch definitions for Ubicom32 architecture. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ + +/* + * Broadcom 53xx RoboSwitch device driver. + * + * Copyright 2007, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * $Id$ + */ + +#ifndef _SWITCH_BCM539X_REG_H_ +#define _SWITCH_BCM539X_REG_H_ + +#define BCM539X_CMD_READ 0x60 +#define BCM539X_CMD_WRITE 0x61 + +#define BCM539X_GLOBAL_SPI_DATA0 0xf0 + +#define BCM539X_GLOBAL_SPI_STATUS 0xfe +#define BCM539X_GLOBAL_SPI_ST_SPIF (1<<7) +#define BCM539X_GLOBAL_SPI_ST_RACK (1<<5) + +#define BCM539X_GLOBAL_PAGE 0xff + +#define PAGE_PORT_TC 0x00 // Port Traffic Control Register + +#define PAGE_QOS_CTL 0x30 // QoS Global Control Register +#define PAGE_QOS_TAG 0x34 // Default IEEE 802.1Q TAG Register + +#define PAGE_MII_CTL_PORT0 0x10 // Internal PHY MII Register +#define PAGE_MII_CTL_PORT1 0x11 +#define PAGE_MII_CTL_PORT2 0x12 +#define PAGE_MII_CTL_PORT3 0x13 +#define PAGE_MII_CTL_PORT4 0x14 + +#define PAGE_STATUS 0x01 // Status Register Page +#define PAGE_RATE_CONTROL 0x41 // Broadcast Storm Suppression Register + +#define REG_GRATE_CONTROL 0x00 + +#define REG_LED_POWER 0x12 + +// Ingress Rate Control +#define REG_IRATE_CONTROLP0 0x10 +#define REG_IRATE_CONTROLP1 0x14 +#define REG_IRATE_CONTROLP2 0x18 +#define REG_IRATE_CONTROLP3 0x1C +#define REG_IRATE_CONTROLP4 0x20 +#define REG_IRATE_CONTROLP7 0x2C +#define REG_IRATE_CONTROLPI 0x30 + +// Egress Rate Control +#define REG_ERATE_CONTROLP0 0x80 +#define REG_ERATE_CONTROLP1 0x82 +#define REG_ERATE_CONTROLP2 0x84 +#define REG_ERATE_CONTROLP3 0x86 +#define REG_ERATE_CONTROLP4 0x88 +#define REG_ERATE_CONTROLP5 0x8A +#define REG_ERATE_CONTROLP6 0x8C +#define REG_ERATE_CONTROLP7 0x8E +#define REG_ERATE_CONTROLPI 0x90 + +#define REG_LINK_STATUS 0x00 + +#define REG_TC_PORT0 0x00 +#define REG_TC_PORT1 0x01 +#define REG_TC_PORT2 0x02 +#define REG_TC_PORT3 0x03 +#define REG_TC_PORT4 0x04 +#define REG_TC_PORT5 0x05 + +#define REG_SPEED_CTL 0x00 +#define REG_SPEED_ADV100 0x08 +#define REG_SPEED_ADV1000 0x12 + +#define REG_QOS_EN 0x00 +#define REG_QOS_TAG_PORT1 0x12 // Default IEEE 802.1Q TAG, PORT 1 +#define REG_QOS_TAG_PORT2 0x14 // Default IEEE 802.1Q TAG, PORT 2 +#define REG_QOS_TAG_PORT3 0x16 // Default IEEE 802.1Q TAG, PORT 3 +#define REG_QOS_TAG_PORT4 0x18 // Default IEEE 802.1Q TAG, PORT 4 +#define REG_QOS_PID_PORT1 0x52 // Ingress Port Priority ID MAP, PORT 1 +#define REG_QOS_PID_PORT2 0x54 // Ingress Port Priority ID MAP, PORT 2 +#define REG_QOS_PID_PORT3 0x56 // Ingress Port Priority ID MAP, PORT 3 +#define REG_QOS_PID_PORT4 0x58 // Ingress Port Priority ID MAP, PORT 4 +#define REG_QOS_TXQ_CTL 0x80 // Tx Queue Control Register +#define REG_QOS_TXQ_WHTQ0 0x81 // Tx Queue Weight Register Queue 0 +#define REG_QOS_TXQ_WHTQ1 0x82 // Tx Queue Weight Register Queue 1 +#define REG_QOS_TXQ_WHTQ2 0x83 // Tx Queue Weight Register Queue 2 +#define REG_QOS_TXQ_WHTQ3 0x84 // Tx Queue Weight Register Queue 3 + +#define REG_CTRL_PPSEL 0x24 /* 5397: Protected port select register */ + +#define RATE_CONTROL_ENABLED (1 << 22) +#define RATE_CONTROL_BSIZE ((1 << 10) | (1 << 9) | (1 << 8)) + +#define RATE_CONTROL_HIGH ((1 << 7) | (1 << 6) | (1 << 5) | (1 << 4)) +#define RATE_CONTROL_HIGH_N ~((1 << 3) | (1 << 2) | (1 << 1) | (1 << 0)) + +#define RATE_CONTROL_MEDIUM ((1 << 6) | (1 << 5) | (1 << 4) | (1 << 3) | (1 << 2) | (1 << 1) | (1 << 0)) +#define RATE_CONTROL_MEDIUM_N ~((1 << 7)) + +#define RATE_CONTROL_NORMAL ((1 << 5) | (1 << 2) | (1 << 0)) +#define RATE_CONTROL_NORMAL_N ~((1 << 7) | (1 << 6) | (1 << 4) | (1 << 3) | (1 << 1)) + +#define RATE_CONTROL_LOW ((1 << 4) | (1 << 3) | (1 << 0)) +#define RATE_CONTROL_LOW_N ~((1 << 7) | (1 << 6) | (1 << 5) | (1 << 2) | (1 << 1)) + +// --- Gemtek, Configure the switch to support Ethernet Port QoS + +/* MII access registers */ +#define PSEUDO_PHYAD 0x1E /* MII Pseudo PHY address */ +#define REG_MII_PAGE 0x10 /* MII Page register */ +#define REG_MII_ADDR 0x11 /* MII Address register */ +#define REG_MII_DATA0 0x18 /* MII Data register 0 */ +#define REG_MII_DATA1 0x19 /* MII Data register 1 */ +#define REG_MII_DATA2 0x1a /* MII Data register 2 */ +#define REG_MII_DATA3 0x1b /* MII Data register 3 */ + +/* Page numbers */ +#define PAGE_CTRL 0x00 /* Control page */ +#define PAGE_MMR 0x02 /* 5397 Management/Mirroring page */ +#define PAGE_VTBL 0x05 /* ARL/VLAN Table access page */ +#define PAGE_VLAN 0x34 /* VLAN page */ + +/* Control page registers */ +#define REG_CTRL_PORT0 0x00 /* Port 0 traffic control register */ +#define REG_CTRL_PORT1 0x01 /* Port 1 traffic control register */ +#define REG_CTRL_PORT2 0x02 /* Port 2 traffic control register */ +#define REG_CTRL_PORT3 0x03 /* Port 3 traffic control register */ +#define REG_CTRL_PORT4 0x04 /* Port 4 traffic control register */ +#define REG_CTRL_PORT5 0x05 /* Port 5 traffic control register */ +#define REG_CTRL_PORT6 0x06 /* Port 6 traffic control register */ +#define REG_CTRL_PORT7 0x07 /* Port 7 traffic control register */ +#define REG_CTRL_MODE 0x0B /* Switch Mode register */ +#define REG_CTRL_MIIPO 0x0E /* 5325: MII Port Override register */ +#define REG_CTRL_SRST 0x79 /* Software reset control register */ + +#define REG_DEVICE_ID 0x30 /* 539x Device id: */ +#define DEVID5395 0x95 /* 5395 */ +#define DEVID5397 0x97 /* 5397 */ +#define DEVID5398 0x98 /* 5398 */ +#define REG_REVISION_ID 0x40 /* 539x Revision id: */ + +/* VLAN page registers */ +#define REG_VLAN_CTRL0 0x00 /* VLAN Control 0 register */ +#define REG_VLAN_CTRL1 0x01 /* VLAN Control 1 register */ +#define REG_VLAN_CTRL2 0x02 /* VLAN Control 2 register */ +#define REG_VLAN_CTRL3 0x03 /* VLAN Control 3 register */ +#define REG_VLAN_CTRL4 0x04 /* VLAN Control 4 register */ +#define REG_VLAN_CTRL5 0x05 /* VLAN Control 5 register */ +#define REG_VLAN_ACCESS 0x06 /* VLAN Table Access register */ +#define REG_VLAN_WRITE 0x08 /* VLAN Write register */ +#define REG_VLAN_READ 0x0C /* VLAN Read register */ +#define REG_VLAN_PTAG0 0x10 /* VLAN Default Port Tag register - port 0 */ +#define REG_VLAN_PTAG1 0x12 /* VLAN Default Port Tag register - port 1 */ +#define REG_VLAN_PTAG2 0x14 /* VLAN Default Port Tag register - port 2 */ +#define REG_VLAN_PTAG3 0x16 /* VLAN Default Port Tag register - port 3 */ +#define REG_VLAN_PTAG4 0x18 /* VLAN Default Port Tag register - port 4 */ +#define REG_VLAN_PTAG5 0x1a /* VLAN Default Port Tag register - port 5 */ +#define REG_VLAN_PTAG6 0x1c /* VLAN Default Port Tag register - port 6 */ +#define REG_VLAN_PTAG7 0x1e /* VLAN Default Port Tag register - port 7 */ +#define REG_VLAN_PTAG8 0x20 /* 539x: VLAN Default Port Tag register - IMP port */ +#define REG_VLAN_PMAP 0x20 /* 5325: VLAN Priority Re-map register */ + +/* ARL/VLAN Table Access page registers */ +#define REG_VTBL_CTRL 0x00 /* ARL Read/Write Control */ +#define REG_VTBL_MINDX 0x02 /* MAC Address Index */ +#define REG_VTBL_VINDX 0x08 /* VID Table Index */ +#define REG_VTBL_ARL_E0 0x10 /* ARL Entry 0 */ +#define REG_VTBL_ARL_E1 0x18 /* ARL Entry 1 */ +#define REG_VTBL_DAT_E0 0x18 /* ARL Table Data Entry 0 */ +#define REG_VTBL_SCTRL 0x20 /* ARL Search Control */ +#define REG_VTBL_SADDR 0x22 /* ARL Search Address */ +#define REG_VTBL_SRES 0x24 /* ARL Search Result */ +#define REG_VTBL_SREXT 0x2c /* ARL Search Result */ +#define REG_VTBL_VID_E0 0x30 /* VID Entry 0 */ +#define REG_VTBL_VID_E1 0x32 /* VID Entry 1 */ +#define REG_VTBL_PREG 0xFF /* Page Register */ +#define REG_VTBL_ACCESS 0x60 /* VLAN table access register */ +#define REG_VTBL_INDX 0x61 /* VLAN table address index register */ +#define REG_VTBL_ENTRY 0x63 /* VLAN table entry register */ +#define REG_VTBL_ACCESS_5395 0x80 /* VLAN table access register */ +#define REG_VTBL_INDX_5395 0x81 /* VLAN table address index register */ +#define REG_VTBL_ENTRY_5395 0x83 /* VLAN table entry register */ + +/* SPI registers */ +#define REG_SPI_PAGE 0xff /* SPI Page register */ + +#endif diff --git a/target/linux/ubicom32/files/arch/ubicom32/mach-common/switch-bcm539x.c b/target/linux/ubicom32/files/arch/ubicom32/mach-common/switch-bcm539x.c new file mode 100644 index 0000000000..d9eca381a5 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/mach-common/switch-bcm539x.c @@ -0,0 +1,1195 @@ +/* + * arch/ubicom32/mach-common/switch-bcm539x.c + * BCM539X switch driver, SPI mode + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ + +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <linux/gpio.h> +#include <linux/delay.h> +#include <linux/mii.h> + +#include <asm/switch-dev.h> +#include <asm/ubicom32-spi-gpio.h> +#include "switch-core.h" +#include "switch-bcm539x-reg.h" + +#define DRIVER_NAME "bcm539x-spi" +#define DRIVER_VERSION "1.0" + +#undef BCM539X_DEBUG +#define BCM539X_SPI_RETRIES 100 + +struct bcm539x_data { + struct switch_device *switch_dev; + + /* + * Our private data + */ + struct spi_device *spi; + struct switch_core_platform_data *pdata; + + /* + * Last page we accessed + */ + u8_t last_page; + + /* + * 539x Device ID + */ + u8_t device_id; +}; + +/* + * bcm539x_wait_status + * Waits for the specified bit in the status register to be set/cleared. + */ +static int bcm539x_wait_status(struct bcm539x_data *bd, u8_t mask, int set) +{ + u8_t txbuf[2]; + u8_t rxbuf; + int i; + int ret; + + txbuf[0] = BCM539X_CMD_READ; + txbuf[1] = BCM539X_GLOBAL_SPI_STATUS; + for (i = 0; i < BCM539X_SPI_RETRIES; i++) { + ret = spi_write_then_read(bd->spi, txbuf, 2, &rxbuf, 1); + rxbuf &= mask; + if ((set && rxbuf) || (!set && !rxbuf)) { + return 0; + } + udelay(1); + } + + return -EIO; +} + +/* + * bcm539x_set_page + * Sets the register page for access (only if necessary) + */ +static int bcm539x_set_page(struct bcm539x_data *bd, u8_t page) +{ + u8_t txbuf[3]; + + if (page == bd->last_page) { + return 0; + } + + bd->last_page = page; + + txbuf[0] = BCM539X_CMD_WRITE; + txbuf[1] = BCM539X_GLOBAL_PAGE; + txbuf[2] = page; + + return spi_write(bd->spi, txbuf, 3); +} + +/* + * bcm539x_write_bytes + * Writes a number of bytes to a given page and register + */ +static int bcm539x_write_bytes(struct bcm539x_data *bd, u8_t page, + u8_t reg, void *buf, u8_t len) +{ + int ret; + u8_t *txbuf; + + txbuf = kmalloc(2 + len, GFP_KERNEL); + if (!txbuf) { + return -ENOMEM; + } + + /* + * Make sure the chip has finished processing our previous request + */ + ret = bcm539x_wait_status(bd, BCM539X_GLOBAL_SPI_ST_SPIF, 0); + if (ret) { + goto done; + } + + /* + * Set the page + */ + ret = bcm539x_set_page(bd, page); + if (ret) { + goto done; + } + + /* + * Read the data + */ + txbuf[0] = BCM539X_CMD_WRITE; + txbuf[1] = reg; + memcpy(&txbuf[2], buf, len); + +#ifdef BCM539X_DEBUG + { + int i; + printk("write page %02x reg %02x len=%d buf=", page, reg, len); + for (i = 0; i < len + 2; i++) { + printk("%02x ", txbuf[i]); + } + printk("\n"); + } +#endif + + ret = spi_write(bd->spi, txbuf, 2 + len); + +done: + kfree(txbuf); + return ret; +} + +/* + * bcm539x_write_32 + * Writes 32 bits of data to the given page and register + */ +static inline int bcm539x_write_32(struct bcm539x_data *bd, u8_t page, + u8_t reg, u32_t data) +{ + data = cpu_to_le32(data); + return bcm539x_write_bytes(bd, page, reg, &data, 4); +} + +/* + * bcm539x_write_16 + * Writes 16 bits of data to the given page and register + */ +static inline int bcm539x_write_16(struct bcm539x_data *bd, u8_t page, + u8_t reg, u16_t data) +{ + data = cpu_to_le16(data); + return bcm539x_write_bytes(bd, page, reg, &data, 2); +} + +/* + * bcm539x_write_8 + * Writes 8 bits of data to the given page and register + */ +static inline int bcm539x_write_8(struct bcm539x_data *bd, u8_t page, + u8_t reg, u8_t data) +{ + return bcm539x_write_bytes(bd, page, reg, &data, 1); +} + +/* + * bcm539x_read_bytes + * Reads a number of bytes from a given page and register + */ +static int bcm539x_read_bytes(struct bcm539x_data *bd, u8_t page, + u8_t reg, void *buf, u8_t len) +{ + u8_t txbuf[2]; + int ret; + + /* + * (1) Make sure the chip has finished processing our previous request + */ + ret = bcm539x_wait_status(bd, BCM539X_GLOBAL_SPI_ST_SPIF, 0); + if (ret) { + return ret; + } + + /* + * (2) Set the page + */ + ret = bcm539x_set_page(bd, page); + if (ret) { + return ret; + } + + /* + * (3) Kick off the register read + */ + txbuf[0] = BCM539X_CMD_READ; + txbuf[1] = reg; + ret = spi_write_then_read(bd->spi, txbuf, 2, txbuf, 1); + if (ret) { + return ret; + } + + /* + * (4) Wait for RACK + */ + ret = bcm539x_wait_status(bd, BCM539X_GLOBAL_SPI_ST_RACK, 1); + if (ret) { + return ret; + } + + /* + * (5) Read the data + */ + txbuf[0] = BCM539X_CMD_READ; + txbuf[1] = BCM539X_GLOBAL_SPI_DATA0; + + ret = spi_write_then_read(bd->spi, txbuf, 2, buf, len); + +#ifdef BCM539X_DEBUG + { + int i; + printk("read page %02x reg %02x len=%d rxbuf=", + page, reg, len); + for (i = 0; i < len; i++) { + printk("%02x ", ((u8_t *)buf)[i]); + } + printk("\n"); + } +#endif + + return ret; +} + +/* + * bcm539x_read_32 + * Reads an 32 bit number from a given page and register + */ +static int bcm539x_read_32(struct bcm539x_data *bd, u8_t page, + u8_t reg, u32_t *buf) +{ + int ret = bcm539x_read_bytes(bd, page, reg, buf, 4); + *buf = le32_to_cpu(*buf); + return ret; +} + +/* + * bcm539x_read_16 + * Reads an 16 bit number from a given page and register + */ +static int bcm539x_read_16(struct bcm539x_data *bd, u8_t page, + u8_t reg, u16_t *buf) +{ + int ret = bcm539x_read_bytes(bd, page, reg, buf, 2); + *buf = le16_to_cpu(*buf); + return ret; +} + +/* + * bcm539x_read_8 + * Reads an 8 bit number from a given page and register + */ +static int bcm539x_read_8(struct bcm539x_data *bd, u8_t page, + u8_t reg, u8_t *buf) +{ + return bcm539x_read_bytes(bd, page, reg, buf, 1); +} + +/* + * bcm539x_set_mode + */ +static int bcm539x_set_mode(struct bcm539x_data *bd, int state) +{ + u8_t buf; + int ret; + + ret = bcm539x_read_8(bd, PAGE_PORT_TC, REG_CTRL_MODE, &buf); + if (ret) { + return ret; + } + + buf &= ~(1 << 1); + buf |= state ? (1 << 1) : 0; + + ret = bcm539x_write_8(bd, PAGE_PORT_TC, REG_CTRL_MODE, buf); + return ret; +} + +/* + * bcm539x_handle_reset + */ +static int bcm539x_handle_reset(struct switch_device *dev, char *buf, int inst) +{ + struct bcm539x_data *bd = + (struct bcm539x_data *)switch_get_drvdata(dev); + int ret; + + ret = bcm539x_write_8(bd, PAGE_PORT_TC, REG_CTRL_SRST, + (1 << 7) | (1 << 4)); + if (ret) { + return ret; + } + + udelay(20); + + ret = bcm539x_write_8(bd, PAGE_PORT_TC, REG_CTRL_SRST, 0); + return ret; +} + +/* + * bcm539x_handle_vlan_ports_read + */ +static int bcm539x_handle_vlan_ports_read(struct switch_device *dev, + char *buf, int inst) +{ + struct bcm539x_data *bd = + (struct bcm539x_data *)switch_get_drvdata(dev); + int j; + int len = 0; + u8_t rxbuf8; + u32_t rxbuf32; + int ret; + + ret = bcm539x_write_16(bd, PAGE_VTBL, REG_VTBL_INDX_5395, inst); + if (ret) { + return ret; + } + + ret = bcm539x_write_8(bd, PAGE_VTBL, REG_VTBL_ACCESS_5395, + (1 << 7) | 1); + if (ret) { + return ret; + } + + /* + * Wait for completion + */ + for (j = 0; j < BCM539X_SPI_RETRIES; j++) { + ret = bcm539x_read_8(bd, PAGE_VTBL, REG_VTBL_ACCESS_5395, + &rxbuf8); + if (ret) { + return ret; + } + if (!(rxbuf8 & (1 << 7))) { + break; + } + } + + if (j == BCM539X_SPI_RETRIES) { + return -EIO; + } + + /* + * Read the table entry + */ + ret = bcm539x_read_32(bd, PAGE_VTBL, REG_VTBL_ENTRY_5395, &rxbuf32); + if (ret) { + return ret; + } + + for (j = 0; j < 9; j++) { + if (rxbuf32 & (1 << j)) { + u16_t rxbuf16; + len += sprintf(buf + len, "%d", j); + if (rxbuf32 & (1 << (j + 9))) { + buf[len++] = 'u'; + } else { + buf[len++] = 't'; + } + ret = bcm539x_read_16(bd, PAGE_VLAN, + REG_VLAN_PTAG0 + (j << 1), + &rxbuf16); + if (ret) { + return ret; + } + if (rxbuf16 == inst) { + buf[len++] = '*'; + } + buf[len++] = '\t'; + } + } + + len += sprintf(buf + len, "\n"); + buf[len] = '\0'; + + return len; +} + +/* + * bcm539x_handle_vlan_ports_write + */ +static int bcm539x_handle_vlan_ports_write(struct switch_device *dev, + char *buf, int inst) +{ + struct bcm539x_data *bd = + (struct bcm539x_data *)switch_get_drvdata(dev); + int j; + u32_t untag; + u32_t ports; + u32_t def; + + u8_t rxbuf8; + u16_t rxbuf16; + int ret; + + switch_parse_vlan_ports(dev, buf, &untag, &ports, &def); + +#ifdef BCM539X_DEBUG + printk(KERN_DEBUG "'%s' inst=%d untag=%08x ports=%08x def=%08x\n", + buf, inst, untag, ports, def); +#endif + + if (!ports) { + return 0; + } + + /* + * Change default vlan tag + */ + for (j = 0; j < 9; j++) { + if ((untag | def) & (1 << j)) { + ret = bcm539x_write_16(bd, PAGE_VLAN, + REG_VLAN_PTAG0 + (j << 1), + inst); + if (ret) { + return ret; + } + continue; + } + + if (!(dev->port_mask[0] & (1 << j))) { + continue; + } + + /* + * Remove any ports which are not listed anymore as members of + * this vlan + */ + ret = bcm539x_read_16(bd, PAGE_VLAN, + REG_VLAN_PTAG0 + (j << 1), &rxbuf16); + if (ret) { + return ret; + } + if (rxbuf16 == inst) { + ret = bcm539x_write_16(bd, PAGE_VLAN, + REG_VLAN_PTAG0 + (j << 1), 0); + if (ret) { + return ret; + } + } + } + + /* + * Write the VLAN table + */ + ret = bcm539x_write_16(bd, PAGE_VTBL, REG_VTBL_INDX_5395, inst); + if (ret) { + return ret; + } + + ret = bcm539x_write_32(bd, PAGE_VTBL, REG_VTBL_ENTRY_5395, + (untag << 9) | ports); + if (ret) { + return ret; + } + + ret = bcm539x_write_8(bd, PAGE_VTBL, REG_VTBL_ACCESS_5395, + (1 << 7) | 0); + if (ret) { + return ret; + } + + /* + * Wait for completion + */ + for (j = 0; j < BCM539X_SPI_RETRIES; j++) { + ret = bcm539x_read_bytes(bd, PAGE_VTBL, REG_VTBL_ACCESS_5395, + &rxbuf8, 1); + if (ret) { + return ret; + } + if (!(rxbuf8 & (1 << 7))) { + break; + } + } + + return (j < BCM539X_SPI_RETRIES) ? 0 : -EIO; +} + +/* + * Handlers for <this_driver>/vlan/<vlan_id> + */ +static const struct switch_handler bcm539x_switch_handlers_vlan_dir[] = { + { + .name = "ports", + .read = bcm539x_handle_vlan_ports_read, + .write = bcm539x_handle_vlan_ports_write, + }, + { + }, +}; + +/* + * bcm539x_handle_vlan_delete_write + */ +static int bcm539x_handle_vlan_delete_write(struct switch_device *dev, + char *buf, int inst) +{ + struct bcm539x_data *bd = + (struct bcm539x_data *)switch_get_drvdata(dev); + int vid; + u8_t rxbuf8; + u32_t txbuf; + int j; + int ret; + + vid = simple_strtoul(buf, NULL, 0); + if (!vid) { + return -EINVAL; + } + + /* + * Disable this VLAN + * + * Go through the port-based vlan registers and clear the appropriate + * ones out + */ + for (j = 0; j < 9; j++) { + u16_t rxbuf16; + ret = bcm539x_read_16(bd, PAGE_VLAN, REG_VLAN_PTAG0 + (j << 1), + &rxbuf16); + if (ret) { + return ret; + } + if (rxbuf16 == vid) { + txbuf = 0; + ret = bcm539x_write_16(bd, PAGE_VLAN, + REG_VLAN_PTAG0 + (j << 1), + txbuf); + if (ret) { + return ret; + } + } + } + + /* + * Write the VLAN table + */ + txbuf = vid; + ret = bcm539x_write_16(bd, PAGE_VTBL, REG_VTBL_INDX_5395, txbuf); + if (ret) { + return ret; + } + + txbuf = 0; + ret = bcm539x_write_32(bd, PAGE_VTBL, REG_VTBL_ENTRY_5395, txbuf); + if (ret) { + return ret; + } + + txbuf = (1 << 7) | (0); + ret = bcm539x_write_8(bd, PAGE_VTBL, REG_VTBL_ACCESS_5395, txbuf); + if (ret) { + return ret; + } + + /* + * Wait for completion + */ + for (j = 0; j < BCM539X_SPI_RETRIES; j++) { + ret = bcm539x_read_bytes(bd, PAGE_VTBL, REG_VTBL_ACCESS_5395, + &rxbuf8, 1); + if (ret) { + return ret; + } + if (!(rxbuf8 & (1 << 7))) { + break; + } + } + + if (j == BCM539X_SPI_RETRIES) { + return -EIO; + } + + return switch_remove_vlan_dir(dev, vid); +} + +/* + * bcm539x_handle_vlan_create_write + */ +static int bcm539x_handle_vlan_create_write(struct switch_device *dev, + char *buf, int inst) +{ + int vid; + + vid = simple_strtoul(buf, NULL, 0); + if (!vid) { + return -EINVAL; + } + + return switch_create_vlan_dir(dev, vid, + bcm539x_switch_handlers_vlan_dir); +} + +/* + * bcm539x_handle_enable_read + */ +static int bcm539x_handle_enable_read(struct switch_device *dev, + char *buf, int inst) +{ + struct bcm539x_data *bd = + (struct bcm539x_data *)switch_get_drvdata(dev); + u8_t rxbuf; + int ret; + + ret = bcm539x_read_8(bd, PAGE_PORT_TC, REG_CTRL_MODE, &rxbuf); + if (ret) { + return ret; + } + rxbuf = (rxbuf & (1 << 1)) ? 1 : 0; + + return sprintf(buf, "%d\n", rxbuf); +} + +/* + * bcm539x_handle_enable_write + */ +static int bcm539x_handle_enable_write(struct switch_device *dev, + char *buf, int inst) +{ + struct bcm539x_data *bd = + (struct bcm539x_data *)switch_get_drvdata(dev); + + return bcm539x_set_mode(bd, buf[0] == '1'); +} + +/* + * bcm539x_handle_enable_vlan_read + */ +static int bcm539x_handle_enable_vlan_read(struct switch_device *dev, + char *buf, int inst) +{ + struct bcm539x_data *bd = + (struct bcm539x_data *)switch_get_drvdata(dev); + u8_t rxbuf; + int ret; + + ret = bcm539x_read_8(bd, PAGE_VLAN, REG_VLAN_CTRL0, &rxbuf); + if (ret) { + return ret; + } + rxbuf = (rxbuf & (1 << 7)) ? 1 : 0; + + return sprintf(buf, "%d\n", rxbuf); +} + +/* + * bcm539x_handle_enable_vlan_write + */ +static int bcm539x_handle_enable_vlan_write(struct switch_device *dev, + char *buf, int inst) +{ + struct bcm539x_data *bd = + (struct bcm539x_data *)switch_get_drvdata(dev); + int ret; + + /* + * disable 802.1Q VLANs + */ + if (buf[0] != '1') { + ret = bcm539x_write_8(bd, PAGE_VLAN, REG_VLAN_CTRL0, 0); + return ret; + } + + /* + * enable 802.1Q VLANs + * + * Enable 802.1Q | IVL learning + */ + ret = bcm539x_write_8(bd, PAGE_VLAN, REG_VLAN_CTRL0, + (1 << 7) | (3 << 5)); + if (ret) { + return ret; + } + + /* + * RSV multicast fwd | RSV multicast chk + */ + ret = bcm539x_write_8(bd, PAGE_VLAN, REG_VLAN_CTRL1, + (1 << 2) | (1 << 3)); + if (ret) { + return ret; + } +#if 0 + /* + * Drop invalid VID + */ + ret = bcm539x_write_16(bd, PAGE_VLAN, REG_VLAN_CTRL3, 0x00FF); + if (ret) { + return ret; + } +#endif + return 0; +} + +/* + * bcm539x_handle_port_enable_read + */ +static int bcm539x_handle_port_enable_read(struct switch_device *dev, + char *buf, int inst) +{ + return sprintf(buf, "%d\n", 1); +} + +/* + * bcm539x_handle_port_enable_write + */ +static int bcm539x_handle_port_enable_write(struct switch_device *dev, + char *buf, int inst) +{ + /* + * validate port + */ + if (!(dev->port_mask[0] & (1 << inst))) { + return -EIO; + } + + if (buf[0] != '1') { + printk(KERN_WARNING "switch port[%d] disabling is not supported\n", inst); + } + return 0; +} + +/* + * bcm539x_handle_port_state_read + */ +static int bcm539x_handle_port_state_read(struct switch_device *dev, + char *buf, int inst) +{ + struct bcm539x_data *bd = + (struct bcm539x_data *)switch_get_drvdata(dev); + int ret; + u16_t link; + + /* + * validate port + */ + if (!(dev->port_mask[0] & (1 << inst))) { + return -EIO; + } + + /* + * check PHY link state - CPU port (port 8) is always up + */ + ret = bcm539x_read_16(bd, PAGE_STATUS, REG_LINK_STATUS, &link); + if (ret) { + return ret; + } + link |= (1 << 8); + + return sprintf(buf, "%d\n", (link & (1 << inst)) ? 1 : 0); +} + +/* + * bcm539x_handle_port_media_read + */ +static int bcm539x_handle_port_media_read(struct switch_device *dev, + char *buf, int inst) +{ + struct bcm539x_data *bd = + (struct bcm539x_data *)switch_get_drvdata(dev); + int ret; + u16_t link, duplex; + u32_t speed; + + /* + * validate port + */ + if (!(dev->port_mask[0] & (1 << inst))) { + return -EIO; + } + + /* + * check PHY link state first - CPU port (port 8) is always up + */ + ret = bcm539x_read_16(bd, PAGE_STATUS, REG_LINK_STATUS, &link); + if (ret) { + return ret; + } + link |= (1 << 8); + + if (!(link & (1 << inst))) { + return sprintf(buf, "UNKNOWN\n"); + } + + /* + * get link speeda dn duplex - CPU port (port 8) is 1000/full + */ + ret = bcm539x_read_32(bd, PAGE_STATUS, 4, &speed); + if (ret) { + return ret; + } + speed |= (2 << 16); + speed = (speed >> (2 * inst)) & 3; + + ret = bcm539x_read_16(bd, PAGE_STATUS, 8, &duplex); + if (ret) { + return ret; + } + duplex |= (1 << 8); + duplex = (duplex >> inst) & 1; + + return sprintf(buf, "%d%cD\n", + (speed == 0) ? 10 : ((speed == 1) ? 100 : 1000), + duplex ? 'F' : 'H'); +} + +/* + * bcm539x_handle_port_meida_write + */ +static int bcm539x_handle_port_meida_write(struct switch_device *dev, + char *buf, int inst) +{ + struct bcm539x_data *bd = + (struct bcm539x_data *)switch_get_drvdata(dev); + int ret; + u16_t ctrl_word, local_cap, local_giga_cap; + + /* + * validate port (not for CPU port) + */ + if (!(dev->port_mask[0] & (1 << inst) & ~(1 << 8))) { + return -EIO; + } + + /* + * Get the maximum capability from status + * SPI reg[0x00] = PHY[0x0] --- MII control + * SPI reg[0x08] = PHY[0x4] --- MII local capability + * SPI reg[0x12] = PHY[0x9] --- GMII control + */ + ret = bcm539x_read_16(bd, REG_MII_PAGE + inst, (MII_ADVERTISE << 1), &local_cap); + if (ret) { + return ret; + } + ret = bcm539x_read_16(bd, REG_MII_PAGE + inst, (MII_CTRL1000 << 1), &local_giga_cap); + if (ret) { + return ret; + } + + /* Configure to the requested speed */ + if (strncmp(buf, "1000FD", 6) == 0) { + /* speed */ + local_cap &= ~(ADVERTISE_10HALF | ADVERTISE_10FULL); + local_cap &= ~(ADVERTISE_100HALF | ADVERTISE_100FULL); + local_giga_cap |= (ADVERTISE_1000HALF | ADVERTISE_1000FULL); + /* duplex */ + } else if (strncmp(buf, "100FD", 5) == 0) { + /* speed */ + local_cap &= ~(ADVERTISE_10HALF | ADVERTISE_10FULL); + local_cap |= (ADVERTISE_100HALF | ADVERTISE_100FULL); + local_giga_cap &= ~(ADVERTISE_1000HALF | ADVERTISE_1000FULL); + /* duplex */ + local_cap &= ~(ADVERTISE_100HALF); + } else if (strncmp(buf, "100HD", 5) == 0) { + /* speed */ + local_cap &= ~(ADVERTISE_10HALF | ADVERTISE_10FULL); + local_cap |= (ADVERTISE_100HALF | ADVERTISE_100FULL); + local_giga_cap &= ~(ADVERTISE_1000HALF | ADVERTISE_1000FULL); + /* duplex */ + local_cap &= ~(ADVERTISE_100FULL); + } else if (strncmp(buf, "10FD", 4) == 0) { + /* speed */ + local_cap |= (ADVERTISE_10HALF | ADVERTISE_10FULL); + local_cap &= ~(ADVERTISE_100HALF | ADVERTISE_100FULL); + local_giga_cap &= ~(ADVERTISE_1000HALF | ADVERTISE_1000FULL); + /* duplex */ + local_cap &= ~(ADVERTISE_10HALF); + } else if (strncmp(buf, "10HD", 4) == 0) { + /* speed */ + local_cap |= (ADVERTISE_10HALF | ADVERTISE_10FULL); + local_cap &= ~(ADVERTISE_100HALF | ADVERTISE_100FULL); + local_giga_cap &= ~(ADVERTISE_1000HALF | ADVERTISE_1000FULL); + /* duplex */ + local_cap &= ~(ADVERTISE_10FULL); + } else if (strncmp(buf, "AUTO", 4) == 0) { + /* speed */ + local_cap |= (ADVERTISE_10HALF | ADVERTISE_10FULL); + local_cap |= (ADVERTISE_100HALF | ADVERTISE_100FULL); + local_giga_cap |= (ADVERTISE_1000HALF | ADVERTISE_1000FULL); + } else { + return -EINVAL; + } + + /* Active PHY with the requested speed for auto-negotiation */ + ret = bcm539x_write_16(bd, REG_MII_PAGE + inst, (MII_ADVERTISE << 1), local_cap); + if (ret) { + return ret; + } + ret = bcm539x_write_16(bd, REG_MII_PAGE + inst, (MII_CTRL1000 << 1), local_giga_cap); + if (ret) { + return ret; + } + + ret = bcm539x_read_16(bd, REG_MII_PAGE + inst, (MII_BMCR << 1), &ctrl_word); + if (ret) { + return ret; + } + ctrl_word |= (BMCR_ANENABLE | BMCR_ANRESTART); + ret = bcm539x_write_16(bd, REG_MII_PAGE + inst, (MII_BMCR << 1), ctrl_word); + if (ret) { + return ret; + } + + return 0; +} + +/* + * proc_fs entries for this switch + */ +static const struct switch_handler bcm539x_switch_handlers[] = { + { + .name = "enable", + .read = bcm539x_handle_enable_read, + .write = bcm539x_handle_enable_write, + }, + { + .name = "enable_vlan", + .read = bcm539x_handle_enable_vlan_read, + .write = bcm539x_handle_enable_vlan_write, + }, + { + .name = "reset", + .write = bcm539x_handle_reset, + }, + { + }, +}; + +/* + * Handlers for <this_driver>/vlan + */ +static const struct switch_handler bcm539x_switch_handlers_vlan[] = { + { + .name = "delete", + .write = bcm539x_handle_vlan_delete_write, + }, + { + .name = "create", + .write = bcm539x_handle_vlan_create_write, + }, + { + }, +}; + +/* + * Handlers for <this_driver>/port/<port number> + */ +static const struct switch_handler bcm539x_switch_handlers_port[] = { + { + .name = "enable", + .read = bcm539x_handle_port_enable_read, + .write = bcm539x_handle_port_enable_write, + }, + { + .name = "state", + .read = bcm539x_handle_port_state_read, + }, + { + .name = "media", + .read = bcm539x_handle_port_media_read, + .write = bcm539x_handle_port_meida_write, + }, + { + }, +}; + +/* + * bcm539x_probe + */ +static int __devinit bcm539x_probe(struct spi_device *spi) +{ + struct bcm539x_data *bd; + struct switch_core_platform_data *pdata; + struct switch_device *switch_dev = NULL; + int i, ret; + u8_t txbuf[2]; + + pdata = spi->dev.platform_data; + if (!pdata) { + return -EINVAL; + } + + ret = spi_setup(spi); + if (ret < 0) { + return ret; + } + + /* + * Reset the chip if requested + */ + if (pdata->flags & SWITCH_DEV_FLAG_HW_RESET) { + ret = gpio_request(pdata->pin_reset, "switch-bcm539x-reset"); + if (ret) { + printk(KERN_WARNING "Could not request reset\n"); + return -EINVAL; + } + + gpio_direction_output(pdata->pin_reset, 0); + udelay(10); + gpio_set_value(pdata->pin_reset, 1); + udelay(20); + } + + /* + * Allocate our private data structure + */ + bd = kzalloc(sizeof(struct bcm539x_data), GFP_KERNEL); + if (!bd) { + return -ENOMEM; + } + + dev_set_drvdata(&spi->dev, bd); + bd->pdata = pdata; + bd->spi = spi; + bd->last_page = 0xFF; + + /* + * First perform SW reset if needed + */ + if (pdata->flags & SWITCH_DEV_FLAG_SW_RESET) { + txbuf[0] = (1 << 7) | (1 << 4); + ret = bcm539x_write_bytes(bd, PAGE_PORT_TC, + REG_CTRL_SRST, txbuf, 1); + if (ret) { + goto fail; + } + + udelay(20); + + txbuf[0] = 0; + ret = bcm539x_write_bytes(bd, PAGE_PORT_TC, + REG_CTRL_SRST, txbuf, 1); + if (ret) { + goto fail; + } + } + + /* + * See if we can see the chip + */ + for (i = 0; i < 10; i++) { + ret = bcm539x_read_bytes(bd, PAGE_MMR, REG_DEVICE_ID, + &bd->device_id, 1); + if (!ret) { + break; + } + } + if (ret) { + goto fail; + } + + /* + * We only support 5395, 5397, 5398 + */ + if ((bd->device_id != 0x95) && (bd->device_id != 0x97) && + (bd->device_id != 0x98)) { + ret = -ENODEV; + goto fail; + } + + /* + * Override CPU port config: fixed link @1000 with flow control + */ + ret = bcm539x_read_8(bd, PAGE_PORT_TC, REG_CTRL_MIIPO, txbuf); + bcm539x_write_8(bd, PAGE_PORT_TC, REG_CTRL_MIIPO, 0xbb); // Override IMP port config + printk("Broadcom SW CPU port setting: 0x%x -> 0xbb\n", txbuf[0]); + + /* + * Setup the switch driver structure + */ + switch_dev = switch_alloc(); + if (!switch_dev) { + ret = -ENOMEM; + goto fail; + } + switch_dev->name = pdata->name; + + switch_dev->ports = (bd->device_id == 0x98) ? 9 : 6; + switch_dev->port_mask[0] = (bd->device_id == 0x98) ? 0x1FF : 0x11F; + switch_dev->driver_handlers = bcm539x_switch_handlers; + switch_dev->reg_handlers = NULL; + switch_dev->vlan_handlers = bcm539x_switch_handlers_vlan; + switch_dev->port_handlers = bcm539x_switch_handlers_port; + + bd->switch_dev = switch_dev; + switch_set_drvdata(switch_dev, (void *)bd); + + ret = switch_register(bd->switch_dev); + if (ret < 0) { + goto fail; + } + + printk(KERN_INFO "bcm53%02x switch chip initialized\n", bd->device_id); + + return ret; + +fail: + if (switch_dev) { + switch_release(switch_dev); + } + dev_set_drvdata(&spi->dev, NULL); + kfree(bd); + return ret; +} + +static int __attribute__((unused)) bcm539x_remove(struct spi_device *spi) +{ + struct bcm539x_data *bd; + + bd = dev_get_drvdata(&spi->dev); + + if (bd->pdata->flags & SWITCH_DEV_FLAG_HW_RESET) { + gpio_free(bd->pdata->pin_reset); + } + + if (bd->switch_dev) { + switch_unregister(bd->switch_dev); + switch_release(bd->switch_dev); + } + + dev_set_drvdata(&spi->dev, NULL); + + kfree(bd); + + return 0; +} + +static struct spi_driver bcm539x_driver = { + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + }, + .probe = bcm539x_probe, + .remove = __devexit_p(bcm539x_remove), +}; + +static int __init bcm539x_init(void) +{ + return spi_register_driver(&bcm539x_driver); +} + +module_init(bcm539x_init); + +static void __exit bcm539x_exit(void) +{ + spi_unregister_driver(&bcm539x_driver); +} +module_exit(bcm539x_exit); + +MODULE_AUTHOR("Pat Tjin"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("bcm539x SPI switch chip driver"); diff --git a/target/linux/ubicom32/files/arch/ubicom32/mach-common/switch-core.c b/target/linux/ubicom32/files/arch/ubicom32/mach-common/switch-core.c new file mode 100644 index 0000000000..855aa068d2 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/mach-common/switch-core.c @@ -0,0 +1,737 @@ +/* + * arch/ubicom32/mach-common/switch-core.c + * Ubicom32 architecture switch and /proc/switch/... implementation. + * + * (C) Copyright 2009, Ubicom, Inc. + * Copyright (C) 2005 Felix Fietkau <openwrt@nbd.name> + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + * + * Basic doc of driver's /proc interface: + * /proc/switch/<interface>/ + * registers: read-only + * counters: read-only + * reset: write causes hardware reset + * enable: "0", "1" + * enable_vlan: "0", "1" + * port/<port-number>/ + * enabled: "0", "1" + * link state: read-only + * media: "AUTO", "1000FD", "100FD", "100HD", "10FD", "10HD" + * vlan/<port-number>/ + * ports: same syntax as for nvram's vlan*ports (eg. "1 2 3 4 5*") + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/uaccess.h> +#include <linux/ctype.h> +#include <linux/proc_fs.h> +#include <linux/list.h> +#include <linux/rwsem.h> +#include <linux/device.h> + +#include "switch-core.h" + +/* + * Pointer to the root of our filesystem + */ +static struct proc_dir_entry *switch_root; + +/* + * Lock used to manage access to the switch list + */ +DECLARE_RWSEM(switch_list_lock); +EXPORT_SYMBOL_GPL(switch_list_lock); + +/* + * List of switches we are managing + */ +LIST_HEAD(switch_list); +EXPORT_SYMBOL_GPL(switch_list); + +/* + * List of handlers we have + */ +LIST_HEAD(switch_handler_list); +EXPORT_SYMBOL_GPL(switch_handler_list); + +/* + * Keep track of all the handlers we added + */ +struct switch_handler_entry { + struct list_head node; + struct proc_dir_entry *parent; + struct switch_device *dev; + const struct switch_handler *handler; + int inst; +}; + +/* + * Keep track of all VLAN dirs we created + */ +struct switch_vlan_entry { + struct list_head node; + struct proc_dir_entry *pde; + int vlan_id; + const struct switch_handler *handlers; +}; + +/* + * switch_parse_vlan_ports + * Parse the vlan properties written to <driver>/vlan/<vlan_id>/ports + */ +void switch_parse_vlan_ports(struct switch_device *switch_dev, + char *buf, u32_t *untag, + u32_t *ports, u32_t *def) +{ + u32_t tag = 0; + *untag = 0; + *ports = 0; + *def = 0; + + + /* + * Skip any leading spaces + */ + while (isspace(*buf)) { + buf++; + } + + /* + * Parse out the string + */ + while (*buf) { + u32_t port = simple_strtoul(buf, &buf, 10); + u32_t mask = (1 << port); + + /* + * Parse out any flags + */ + while (*buf && !isspace(*buf)) { + switch (*buf++) { + case 't': + tag |= mask; + break; + case '*': + *def |= mask; + break; + } + } + *ports |= mask; + + /* + * Skip any spaces + */ + while (isspace(*buf)) { + buf++; + } + } + + *untag = ~tag & *ports; +} + +/* + * switch_proc_read + * Handle reads from the procfs, dispatches the driver specific handler + */ +static ssize_t switch_proc_read(struct file *file, char *buf, size_t count, + loff_t *ppos) +{ + struct proc_dir_entry *pde = PDE(file->f_dentry->d_inode); + char *page; + int len = 0; + + page = kmalloc(SWITCH_MAX_BUFSZ, GFP_KERNEL); + if (!page) { + return -ENOBUFS; + } + + if (pde->data != NULL) { + struct switch_handler_entry *she = + (struct switch_handler_entry *)pde->data; + if (she->handler->read) { + len += she->handler->read(she->dev, page + len, + she->inst); + } + } + len += 1; + + if (*ppos < len) { + len = min_t(int, len - *ppos, count); + if (copy_to_user(buf, (page + *ppos), len)) { + kfree(page); + return -EFAULT; + } + *ppos += len; + } else { + len = 0; + } + + kfree(page); + + return len; +} + +/* + * switch_proc_write + * Handle writes from the procfs, dispatches the driver specific handler + */ +static ssize_t switch_proc_write(struct file *file, const char *buf, + size_t count, loff_t *data) +{ + struct proc_dir_entry *pde = PDE(file->f_dentry->d_inode); + char *page; + int ret = -EINVAL; + + page = kmalloc(count + 1, GFP_KERNEL); + if (page == NULL) + return -ENOBUFS; + + if (copy_from_user(page, buf, count)) { + kfree(page); + return -EINVAL; + } + page[count] = 0; + + if (pde->data != NULL) { + struct switch_handler_entry *she = + (struct switch_handler_entry *)pde->data; + if (she->handler->write) { + ret = she->handler->write(she->dev, page, she->inst); + if (ret >= 0) { + ret = count; + } + } + } + + kfree(page); + return ret; +} + +/* + * File operations for the proc_fs, we must cast here since proc_fs' definitions + * differ from file_operations definitions. + */ +static struct file_operations switch_proc_fops = { + .read = (ssize_t (*) (struct file *, char __user *, + size_t, loff_t *))switch_proc_read, + .write = (ssize_t (*) (struct file *, const char __user *, + size_t, loff_t *))switch_proc_write, +}; + +/* + * switch_add_handler + */ +static int switch_add_handler(struct switch_device *switch_dev, + struct proc_dir_entry *parent, + const struct switch_handler *handler, + int inst) +{ + struct switch_handler_entry *she; + struct proc_dir_entry *pde; + int mode; + + she = (struct switch_handler_entry *) + kzalloc(sizeof(struct switch_handler_entry), GFP_KERNEL); + if (!she) { + return -ENOMEM; + } + + INIT_LIST_HEAD(&she->node); + she->parent = parent; + she->dev = switch_dev; + she->inst = inst; + she->handler = handler; + list_add(&she->node, &switch_dev->handlers); + + mode = 0; + if (handler->read != NULL) { + mode |= S_IRUSR; + } + if (handler->write != NULL) { + mode |= S_IWUSR; + } + + pde = create_proc_entry(handler->name, mode, parent); + if (!pde) { + kfree(she); + printk("Failed to create node '%s' in parent %p\n", + handler->name, parent); + return -ENOMEM; + } + pde->data = (void *)she; + pde->proc_fops = &switch_proc_fops; + + return 0; +} + +/* + * switch_add_handlers + */ +static int switch_add_handlers(struct switch_device *switch_dev, + struct proc_dir_entry *parent, + const struct switch_handler *handlers, + int inst) +{ + while (handlers->name) { + int ret = switch_add_handler(switch_dev, + parent, handlers, inst); + if (ret) { + return ret; + } + handlers++; + } + + return 0; +} + +/* + * switch_remove_vlan_dirs + * Removes all vlan directories + * + * Assumes all vlan directories are empty, should be called after + * switch_remove_handlers + */ +static void switch_remove_vlan_dirs(struct switch_device *switch_dev) +{ + struct list_head *pos; + struct list_head *tmp; + struct switch_vlan_entry *sve; + + list_for_each_safe(pos, tmp, &switch_dev->vlan_dirs) { + sve = list_entry(pos, struct switch_vlan_entry, node); + list_del(pos); + remove_proc_entry(sve->pde->name, switch_dev->vlan_dir); + kfree(sve); + } +} + +/* + * switch_remove_handlers + * Removes all handlers registered to the given switch_device + */ +static void switch_remove_handlers(struct switch_device *switch_dev) +{ + struct list_head *pos; + struct list_head *tmp; + struct switch_handler_entry *she; + + list_for_each_safe(pos, tmp, &switch_dev->handlers) { + she = list_entry(pos, struct switch_handler_entry, node); + list_del(pos); + remove_proc_entry(she->handler->name, she->parent); + kfree(she); + } +} + +/* + * switch_unregister_proc_nodes + * Unregisters all proc nodes related to switch_dev + */ +void switch_unregister_proc_nodes(struct switch_device *switch_dev) +{ + switch_remove_handlers(switch_dev); + + if (switch_dev->port_dirs) { + int i; + + for (i = 0; i < switch_dev->ports; i++) { + if (switch_dev->port_dirs[i]) { + remove_proc_entry( + switch_dev->port_dirs[i]->name, + switch_dev->port_dir); + } + } + } + + if (switch_dev->port_dir) { + remove_proc_entry("port", switch_dev->driver_dir); + switch_dev->port_dir = NULL; + } + + if (switch_dev->reg_dir) { + remove_proc_entry("reg", switch_dev->reg_dir); + switch_dev->reg_dir = NULL; + } + + if (switch_dev->vlan_dir) { + switch_remove_vlan_dirs(switch_dev); + remove_proc_entry("vlan", switch_dev->driver_dir); + switch_dev->vlan_dir = NULL; + } + + if (switch_dev->driver_dir) { + remove_proc_entry(switch_dev->name, switch_root); + switch_dev->driver_dir = NULL; + } +} + +/* + * switch_remove_vlan_dir + * Removes vlan dir in switch/<switch_driver>/vlan/<vlan_id> + */ +int switch_remove_vlan_dir(struct switch_device *switch_dev, int vlan_id) +{ + struct list_head *pos; + struct switch_vlan_entry *sve = NULL; + + list_for_each(pos, &switch_dev->vlan_dirs) { + struct switch_vlan_entry *tmp = + list_entry(pos, struct switch_vlan_entry, node); + if (tmp->vlan_id == vlan_id) { + sve = tmp; + break; + } + } + + if (!sve) { + return -ENOENT; + } + + /* + * Remove it from the list + */ + list_del(pos); + + /* + * Remove the handlers + */ + while (sve->handlers->name) { + remove_proc_entry(sve->handlers->name, sve->pde); + sve->handlers++; + } + + /* + * Remove the proc entry for the <vlan_id> dir + */ + remove_proc_entry(sve->pde->name, switch_dev->vlan_dir); + + kfree(sve); + + return 0; +} + +/* + * switch_create_vlan_dir + * Creates vlan dir in switch/<switch_driver>/vlan/<vlan_id> + */ +int switch_create_vlan_dir(struct switch_device *switch_dev, + int vlan_id, const struct switch_handler *handlers) +{ + char s[14]; + struct proc_dir_entry *pde = NULL; + struct switch_vlan_entry *sve = NULL; + int ret; + struct list_head *pos; + + /* + * Check to see if it exists already + */ + list_for_each(pos, &switch_dev->vlan_dirs) { + sve = list_entry(pos, struct switch_vlan_entry, node); + if (sve->vlan_id == vlan_id) { + return -EEXIST; + } + } + sve = NULL; + + /* + * Create the vlan directory if we didn't have it before + */ + if (!switch_dev->vlan_dir) { + switch_dev->vlan_dir = proc_mkdir("vlan", + switch_dev->driver_dir); + if (!switch_dev->vlan_dir) { + goto fail; + } + if (switch_dev->vlan_handlers) { + ret = switch_add_handlers(switch_dev, + switch_dev->vlan_dir, + switch_dev->vlan_handlers, 0); + if (ret) { + goto fail; + } + } + } + + /* + * Create the vlan_id directory + */ + snprintf(s, 14, "%d", vlan_id); + pde = proc_mkdir(s, switch_dev->vlan_dir); + if (!pde) { + goto fail; + } + + /* + * Create the handlers for this vlan + */ + if (handlers) { + ret = switch_add_handlers(switch_dev, pde, handlers, vlan_id); + if (ret) { + goto fail; + } + } + + /* + * Keep track of all the switch vlan entries created + */ + sve = (struct switch_vlan_entry *) + kzalloc(sizeof(struct switch_vlan_entry), GFP_KERNEL); + if (!sve) { + goto fail; + } + INIT_LIST_HEAD(&sve->node); + sve->handlers = handlers; + sve->vlan_id = vlan_id; + sve->pde = pde; + list_add(&sve->node, &switch_dev->vlan_dirs); + + return 0; + +fail: + if (sve) { + kfree(sve); + } + + if (pde) { + /* + * Remove any proc entries we might have created + */ + while (handlers->name) { + remove_proc_entry(handlers->name, pde); + handlers++; + } + + remove_proc_entry(s, switch_dev->driver_dir); + } + + return -ENOMEM; +} + +/* + * switch_register_proc_nodes + */ +int switch_register_proc_nodes(struct switch_device *switch_dev) +{ + int i; + int n; + + switch_dev->port_dirs = kzalloc(switch_dev->ports * + sizeof(struct proc_dir_entry *), + GFP_KERNEL); + if (!switch_dev->port_dirs) { + return -ENOMEM; + } + + /* + * Create a new proc entry for this switch + */ + switch_dev->driver_dir = proc_mkdir(switch_dev->name, switch_root); + if (!switch_dev->driver_dir) { + goto fail; + } + if (switch_dev->driver_handlers) { + switch_add_handlers(switch_dev, + switch_dev->driver_dir, + switch_dev->driver_handlers, + 0); + } + + /* + * Create the ports + */ + switch_dev->port_dir = proc_mkdir("port", switch_dev->driver_dir); + if (!switch_dev->port_dir) { + goto fail; + } + for (n = 0, i = 0; i < (SWITCH_PORT_MASK_SIZE * 32); i++) { + if (switch_dev->port_mask[i / 32] & (1 << i % 32)) { + char s[14]; + + snprintf(s, 14, "%d", i); + switch_dev->port_dirs[n] = + proc_mkdir(s, switch_dev->port_dir); + if (!switch_dev->port_dirs[n]) { + goto fail; + } + if (switch_dev->port_handlers) { + switch_add_handlers(switch_dev, + switch_dev->port_dirs[n], + switch_dev->port_handlers, + i); + } + n++; + } + } + + /* + * Create the register directory for switch register access. + */ + if (switch_dev->reg_handlers) { + switch_dev->reg_dir = proc_mkdir("reg", switch_dev->driver_dir); + if (!switch_dev->reg_dir) { + goto fail; + } + + switch_add_handlers(switch_dev, + switch_dev->reg_dir, + switch_dev->reg_handlers, + 0); + } + + /* + * Create the vlan directory + */ + if (switch_dev->vlan_handlers) { + switch_dev->vlan_dir = proc_mkdir("vlan", + switch_dev->driver_dir); + if (!switch_dev->vlan_dir) { + goto fail; + } + if (switch_dev->vlan_handlers) { + switch_add_handlers(switch_dev, + switch_dev->vlan_dir, + switch_dev->vlan_handlers, + 0); + } + } + + return 0; + +fail: + switch_unregister_proc_nodes(switch_dev); + return -ENOMEM; +} + +/* + * switch_release + */ +void switch_release(struct switch_device *switch_dev) +{ + kfree(switch_dev); +} + +/* + * switch_alloc + */ +struct switch_device *switch_alloc(void) +{ + struct switch_device *switch_dev = + kzalloc(sizeof(struct switch_device), + GFP_KERNEL); + INIT_LIST_HEAD(&switch_dev->node); + INIT_LIST_HEAD(&switch_dev->vlan_dirs); + INIT_LIST_HEAD(&switch_dev->handlers); + return switch_dev; +} + +/* + * switch_register + */ +int switch_register(struct switch_device *switch_dev) +{ + int ret; + int i; + + /* + * Make sure that the number of ports and the port mask make sense + */ + for (ret = 0, i = 0; i < (SWITCH_PORT_MASK_SIZE * 32); i++) { + if (switch_dev->port_mask[i / 32] & (1 << i % 32)) { + ret++; + } + } + if (ret > switch_dev->ports) { + return -EINVAL; + } + + /* + * Create the /proc entries + */ + ret = switch_register_proc_nodes(switch_dev); + if (ret) { + return ret; + } + + /* + * Add it to the list of switches + */ + down_write(&switch_list_lock); + list_add_tail(&switch_dev->node, &switch_list); + up_write(&switch_list_lock); + + printk(KERN_INFO "Registered switch device: %s\n", switch_dev->name); + + return 0; +} +EXPORT_SYMBOL_GPL(switch_register); + +/* + * switch_unregister + * Unregisters a previously registered switch_device object + */ +void switch_unregister(struct switch_device *switch_dev) +{ + /* + * remove the proc entries + */ + switch_unregister_proc_nodes(switch_dev); + + /* + * Remove it from the list of switches + */ + down_write(&switch_list_lock); + list_del(&switch_dev->node); + up_write(&switch_list_lock); + + printk(KERN_INFO "Unregistered switch device: %s\n", switch_dev->name); +} +EXPORT_SYMBOL_GPL(switch_unregister); + +/* + * switch_init + */ +static int __init switch_init(void) +{ + switch_root = proc_mkdir("switch", NULL); + if (!switch_root) { + printk(KERN_WARNING "Failed to make root switch node\n"); + return -ENODEV; + } + return 0; +} +module_init(switch_init); + +/* + * switch_exit + */ +static void __exit switch_exit(void) +{ + remove_proc_entry("switch", NULL); +} +module_exit(switch_exit); + +MODULE_AUTHOR("Patrick Tjin"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Ethernet Switch Class Interface"); diff --git a/target/linux/ubicom32/files/arch/ubicom32/mach-common/switch-core.h b/target/linux/ubicom32/files/arch/ubicom32/mach-common/switch-core.h new file mode 100644 index 0000000000..1e18b1cba8 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/mach-common/switch-core.h @@ -0,0 +1,92 @@ +/* + * arch/ubicom32/mach-common/switch-core.h + * Private data for the switch module + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#ifndef _SWITCH_CORE_H_ +#define _SWITCH_CORE_H_ + +struct switch_handler_entry; +struct switch_vlan_entry; + +#define SWITCH_PORT_MASK_SIZE 2 + +struct switch_device { + struct list_head node; + + const char *name; + void *drvdata; + + u8_t ports; + + struct proc_dir_entry *driver_dir; + const struct switch_handler *driver_handlers; + + struct proc_dir_entry *port_dir; + struct proc_dir_entry **port_dirs; + const struct switch_handler *port_handlers; + + struct proc_dir_entry *reg_dir; + const struct switch_handler *reg_handlers; + + struct proc_dir_entry *vlan_dir; + const struct switch_handler *vlan_handlers; + struct list_head vlan_dirs; + + struct list_head handlers; + + u32_t port_mask[SWITCH_PORT_MASK_SIZE]; +}; + +typedef int (*switch_handler_fn)(struct switch_device *, char *buf, int nr); +struct switch_handler { + const char *name; + + switch_handler_fn read; + switch_handler_fn write; +}; + +#define SWITCH_MAX_BUFSZ 4096 + +static inline void switch_set_drvdata(struct switch_device *switch_dev, void *drvdata) +{ + switch_dev->drvdata = drvdata; +} + +static inline void *switch_get_drvdata(struct switch_device *switch_dev) +{ + return switch_dev->drvdata; +} + +extern int switch_create_vlan_dir(struct switch_device *switch_dev, int vlan_id, const struct switch_handler *handlers); +extern int switch_remove_vlan_dir(struct switch_device *switch_dev, int vlan_id); +extern void switch_parse_vlan_ports(struct switch_device *switch_dev, char *buf, u32_t *untag, u32_t *ports, u32_t *def); + +extern void switch_release(struct switch_device *switch_dev); +extern struct switch_device *switch_alloc(void); +extern int switch_register(struct switch_device *switch_dev); +extern void switch_unregister(struct switch_device *switch_dev); + +#endif diff --git a/target/linux/ubicom32/files/arch/ubicom32/mach-common/ubi32-gpio.c b/target/linux/ubicom32/files/arch/ubicom32/mach-common/ubi32-gpio.c new file mode 100644 index 0000000000..5fa22f52b4 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/mach-common/ubi32-gpio.c @@ -0,0 +1,411 @@ +/* + * arch/ubicom32/mach-common/ubi32-gpio.c + * Ubicom gpio driver + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/io.h> +#include <linux/gpio.h> +#include <linux/irq.h> +#include <linux/version.h> + +#if defined(CONFIG_PROC_FS) +#include <linux/proc_fs.h> +#endif + +#include <linux/io.h> +#include <asm/ip5000.h> +#include <linux/gpio.h> + +#define UBI_GPIO_CHECK_RANGE 0 /* !0 enables range checking */ + + +/* + * Each I/O port can be configured to operate in one of several + * functional modes. One of these modes is GPIO, which causes the + * entire port to function as a GPIO port. Since the various port + * registers serve the system with other important functions, such as + * ethernet, serial, USB, etc., it isn't advantageous to set any of + * the ports to be entirely dedicated for GPIO use. The processor + * alternatively allows individual bits of a port to be assigned to be + * used as GPIO independently from the overall port function. This + * bit-by-bit assignment is selected by setting the corresponding bit + * in the port's gpio_mask register. When set, the selected bit is + * then enabled as a GPIO. If the corresponding bit is set in the + * gpio_ctl register of the port, the bit is configured as a GPIO + * output. Otherwise, it is an input. + * + * NOTE: This driver uses the bit-by-bit GPIO function assignment + * exclusively and *never* sets the port function registers to the + * GPIO function. + * + * GPIO is not the main function of any of the I/O ports. The port + * bit widths are variable from one port to the next, determined by + * the more common I/O functions of the ports. For simplicity, this + * driver assumes all the ports are 32 bits wide regardless of the + * real bit width of the port. GPIO bits are numbered from zero to + * MAX_UBICOM_GPIOS. Within a port, the least significant bit is + * numbered bit zero, the most significant is bit 31. Since the ports + * are considered logically contiguous, GPIO #32 is the zeroth bit in + * port #1, and so on. Due to the hardware definition, there are + * large gaps in the GPIO numbers representing real pins. + * + * NOTE: It is up to the programmer to refer to the processor data + * sheet to determine which bits in which ports can be accessed and + * used for GPIO. + * + */ + + +/* There are 9 ports, A through I. Not all 32 bits in each + * port can be a GPIO, but we pretend they are. Its up to the + * programmer to refer to the processor data sheet. + */ +#define MAX_UBICOM_GPIOS (9 * 32) /* ARCH_NR_GPIOS */ +#define NUM_GPIO_PORTS (gpio_bank(MAX_UBICOM_GPIOS)) + + +/* GPIO reservation bit map array */ +static int reserved_gpio_map[NUM_GPIO_PORTS]; + + +/* Array of hardware io_port addresses */ +static struct ubicom32_io_port *gpio_bank_addr[NUM_GPIO_PORTS] = +{ + UBICOM32_IO_PORT(RA), + UBICOM32_IO_PORT(RB), + UBICOM32_IO_PORT(RC), + UBICOM32_IO_PORT(RD), + UBICOM32_IO_PORT(RE), + UBICOM32_IO_PORT(RF), + UBICOM32_IO_PORT(RG), + UBICOM32_IO_PORT(RH), + UBICOM32_IO_PORT(RI) +}; + + +struct ubi_gpio_chip { + /* + * Right now, nothing else lives here. + */ + struct gpio_chip gpio_chip; +}; + + +#if UBI_GPIO_CHECK_RANGE +inline int check_gpio(unsigned gpio) +{ + if (gpio >= MAX_UBICOM_GPIOS) + return -EINVAL; + return 0; +} +#else +#define check_gpio(n) (0) +#endif + +/* + * ubi_gpio_get_port + * Get the IO port associated with a certain gpio + */ +struct ubicom32_io_port *ubi_gpio_get_port(unsigned gpio) +{ + if (gpio_bank(gpio) > NUM_GPIO_PORTS) { + return NULL; + } + return gpio_bank_addr[gpio_bank(gpio)]; +} + +/* + * ubi_gpio_error() + */ +static void ubi_gpio_error(unsigned gpio) +{ + printk(KERN_ERR "ubicom-gpio: GPIO %d wasn't requested!\n", gpio); +} + +/* + * ubi_port_setup() + */ +static void ubi_port_setup(unsigned gpio, unsigned short usage) +{ + if (!check_gpio(gpio)) { + if (usage) { + UBICOM32_GPIO_ENABLE(gpio); + } else { + UBICOM32_GPIO_DISABLE(gpio); + } + } +} + +/* + * ubi_gpio_request() + */ +static int ubi_gpio_request(struct gpio_chip *chip, unsigned gpio) +{ + unsigned long flags; + + if (check_gpio(gpio) < 0) + return -EINVAL; + + local_irq_save(flags); + + if (unlikely(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) { + printk(KERN_ERR "ubi-gpio: GPIO %d is already reserved!\n", + gpio); + local_irq_restore(flags); + return -EBUSY; + } + + reserved_gpio_map[gpio_bank(gpio)] |= gpio_bit(gpio); + + ubi_port_setup(gpio, 1); + + local_irq_restore(flags); + + return 0; +} + +/* + * ubi_gpio_free() + */ +static void ubi_gpio_free(struct gpio_chip *chip, unsigned gpio) +{ + unsigned long flags; + + if (check_gpio(gpio) < 0) + return; + + local_irq_save(flags); + + if (unlikely(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)))) { + ubi_gpio_error(gpio); + local_irq_restore(flags); + return; + } + + /* Assert the pin is no longer claimed */ + reserved_gpio_map[gpio_bank(gpio)] &= ~gpio_bit(gpio); + + /* Revert port bit to use specified by port->function */ + ubi_port_setup(gpio, 0); + + local_irq_restore(flags); +} + +/* + * ubi_gpio_direction_input() + */ +static int ubi_gpio_direction_input(struct gpio_chip *chip, unsigned gpio) +{ + unsigned long flags; + + if (!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) { + ubi_gpio_error(gpio); + return -EINVAL; + } + + local_irq_save(flags); + + /* Configure pin as gpio */ + ubi_port_setup(gpio, 1); + + /* Assert pin is an input */ + UBICOM32_GPIO_SET_PIN_INPUT(gpio); + + local_irq_restore(flags); + + return 0; +} + + +/* + * ubi_gpio_direction_output() + */ +static int ubi_gpio_direction_output(struct gpio_chip *chip, + unsigned gpio, int value) +{ + unsigned long flags; + + if (!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) { + ubi_gpio_error(gpio); + return -EINVAL; + } + + local_irq_save(flags); + + /* Configure pin as gpio and set initial value in gpio_out register + * so that when we enable it as an output, it will have the correct + * initial value. + */ + ubi_port_setup(gpio, 1); + if (value) { + UBICOM32_GPIO_SET_PIN_HIGH(gpio); + } else { + UBICOM32_GPIO_SET_PIN_LOW(gpio); + } + + /* Enable the pin as an output */ + UBICOM32_GPIO_SET_PIN_OUTPUT(gpio); + + local_irq_restore(flags); + + return 0; +} + + +/* + * ubi_gpio_get_value() + */ +static int ubi_gpio_get_value(struct gpio_chip *chip, unsigned gpio) +{ + return 0 != (gpio_bank_addr[gpio_bank(gpio)]->gpio_in & gpio_bit(gpio)); +} + + +/* + * ubi_gpio_set_value() + */ +static void ubi_gpio_set_value(struct gpio_chip *chip, unsigned gpio, + int arg) +{ + unsigned long flags; + local_irq_save(flags); + + if (arg) { + UBICOM32_GPIO_SET_PIN_HIGH(gpio); + } else { + UBICOM32_GPIO_SET_PIN_LOW(gpio); + } + + local_irq_restore(flags); +} + + +/* + * ubi_gpio_to_irq() + */ +static int ubi_gpio_to_irq(struct gpio_chip *chip, unsigned gpio) +{ + return gpio_to_irq(gpio); +} + + +/* + * ubi_gpio_init() + */ +int __init ubi_gpio_init(void) +{ + int k; + int status; + struct ubi_gpio_chip *chip; + struct gpio_chip *gc; + + printk(KERN_INFO "Ubicom GPIO Controller\n"); + + chip = kzalloc(sizeof(struct ubi_gpio_chip), GFP_KERNEL); + if (chip == NULL) + return -ENOMEM; + + gc = &chip->gpio_chip; + gc->request = ubi_gpio_request; + gc->free = ubi_gpio_free; + gc->to_irq = ubi_gpio_to_irq; + gc->direction_input = ubi_gpio_direction_input; + gc->direction_output = ubi_gpio_direction_output; + gc->get = ubi_gpio_get_value; + gc->set = ubi_gpio_set_value; + gc->can_sleep = 0; + gc->base = 0; + gc->ngpio = MAX_UBICOM_GPIOS; /* ARCH_NR_GPIOS - 1 */ + gc->label = "ubi_gpio"; + + status = gpiochip_add(gc); + if (status != 0) { + kfree(chip); + return status; + } + + /* Assert all pins are free */ + for (k = 0; k < NUM_GPIO_PORTS; k++) { + reserved_gpio_map[k] = 0; + } + + return 0; +} + +#if defined(CONFIG_PROC_FS) +/* + * ubi_get_gpio_dir() + */ +static int ubi_get_gpio_dir(unsigned gpio) +{ + if (gpio_bank_addr[gpio_bank(gpio)]->gpio_ctl & gpio_bit(gpio)) + return 1; + else + return 0; +} + +/* + * gpio_proc_read() + */ +static int ubi_gpio_proc_read(char *buf, char **start, off_t offset, + int len, int *unused_i, void *unused_v) +{ + int c, outlen = 0; + + for (c = 0; c < MAX_UBICOM_GPIOS; c++) { + if (!check_gpio(c) && + (reserved_gpio_map[gpio_bank(c)] & gpio_bit(c))) { + len = sprintf(buf, "GPIO_%d:\t\tGPIO %s\n", c, + ubi_get_gpio_dir(c) ? "OUTPUT" : "INPUT"); + } else { + continue; + } + + buf += len; + outlen += len; + } + return outlen; +} + +/* + * ubi_gpio_register_proc() + */ +static __init int ubi_gpio_register_proc(void) +{ + struct proc_dir_entry *proc_gpio; + + proc_gpio = create_proc_entry("gpio", S_IRUGO, NULL); + if (proc_gpio) + proc_gpio->read_proc = ubi_gpio_proc_read; + + return proc_gpio != NULL; +} +device_initcall(ubi_gpio_register_proc); +#endif diff --git a/target/linux/ubicom32/files/arch/ubicom32/mach-common/ubicom32hid.c b/target/linux/ubicom32/files/arch/ubicom32/mach-common/ubicom32hid.c new file mode 100644 index 0000000000..3318eff88b --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/mach-common/ubicom32hid.c @@ -0,0 +1,557 @@ +/* + * arch/ubicom32/mach-common/ubicom32hid.c + * I2C driver for HID coprocessor found on some DPF implementations. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/gpio.h> +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/i2c.h> +#include <linux/backlight.h> +#include <linux/fb.h> +#include <linux/input.h> +#include <linux/input-polldev.h> + +#include <asm/ubicom32hid.h> + +#define DRIVER_NAME "ubicom32hid" + +#ifdef DEBUG +static int ubicom32hid_debug; +#endif + +static const struct i2c_device_id ubicom32hid_id[] = { + { DRIVER_NAME, }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ubicom32hid_id); + +/* + * Define this to make IR checking strict, in general, it's not needed + */ +#undef UBICOM32HID_STRICT_IR_CHECK + +#define UBICOM32HID_CMD_SET_PWM 0x01 +#define UBICOM32HID_CMD_SET_BL_EN 0x02 +#define UBICOM32HID_BL_EN_LOW 0x00 +#define UBICOM32HID_BL_EN_HIZ 0x01 +#define UBICOM32HID_BL_EN_HI 0x02 +#define UBICOM32HID_CMD_FLUSH 0x99 +#define UBICOM32HID_CMD_RESET 0x99 +#define UBICOM32HID_CMD_GET_IR_SWITCH 0xC0 +#define UBICOM32HID_CMD_GET_REVISION 0xfd +#define UBICOM32HID_CMD_GET_DEVICE_ID 0xfe +#define UBICOM32HID_CMD_GET_VERSION 0xff +#define UBICOM32HID_DEVICE_ID 0x49 + +#define UBICOM32HID_MAX_BRIGHTNESS_PWM 255 + +/* + * Data structure returned by the HID device + */ +struct ubicom32hid_input_data { + uint32_t ircmd; + uint8_t sw_state; + uint8_t sw_changed; +}; + +/* + * Our private data + */ +struct ubicom32hid_data { + /* + * Pointer to the platform data structure, we need the settings. + */ + const struct ubicom32hid_platform_data *pdata; + + /* + * Backlight device + */ + struct backlight_device *bldev; + + /* + * I2C client, for sending messages to the HID device + */ + struct i2c_client *client; + + /* + * Current intensity, used for get_intensity. + */ + int cur_intensity; + + /* + * Input subsystem + * We won't register an input subsystem if there are no mappings. + */ + struct input_polled_dev *poll_dev; +}; + + +/* + * ubicom32hid_set_intensity + */ +static int ubicom32hid_set_intensity(struct backlight_device *bd) +{ + struct ubicom32hid_data *ud = + (struct ubicom32hid_data *)bl_get_data(bd); + int intensity = bd->props.brightness; + int reg; + u8_t val; + int ret; + + /* + * If we're blanked the the intensity doesn't matter. + */ + if ((bd->props.power != FB_BLANK_UNBLANK) || + (bd->props.fb_blank != FB_BLANK_UNBLANK)) { + intensity = 0; + } + + /* + * Set the brightness based on the type of backlight + */ + if (ud->pdata->type == UBICOM32HID_BL_TYPE_BINARY) { + reg = UBICOM32HID_CMD_SET_BL_EN; + if (intensity) { + val = ud->pdata->invert + ? UBICOM32HID_BL_EN_LOW : UBICOM32HID_BL_EN_HI; + } else { + val = ud->pdata->invert + ? UBICOM32HID_BL_EN_HI : UBICOM32HID_BL_EN_LOW; + } + } else { + reg = UBICOM32HID_CMD_SET_PWM; + val = ud->pdata->invert + ? (UBICOM32HID_MAX_BRIGHTNESS_PWM - intensity) : + intensity; + } + + /* + * Send the command + */ + ret = i2c_smbus_write_byte_data(ud->client, reg, val); + if (ret < 0) { + dev_warn(&ud->client->dev, "Unable to write backlight err=%d\n", + ret); + return ret; + } + + ud->cur_intensity = intensity; + + return 0; +} + +/* + * ubicom32hid_get_intensity + * Return the current intensity of the backlight. + */ +static int ubicom32hid_get_intensity(struct backlight_device *bd) +{ + struct ubicom32hid_data *ud = + (struct ubicom32hid_data *)bl_get_data(bd); + + return ud->cur_intensity; +} + +/* + * ubicom32hid_verify_data + * Verify the data to see if there is any action to be taken + * + * Returns 0 if no action is to be taken, non-zero otherwise + */ +static int ubicom32hid_verify_data(struct ubicom32hid_data *ud, + struct ubicom32hid_input_data *data) +{ + uint8_t *ircmd = (uint8_t *)&(data->ircmd); + + /* + * ircmd == DEADBEEF means ir queue is empty. Since this is a + * meaningful code, that means the rest of the message is most likely + * correct, so only process the data if the switch state has changed. + */ + if (data->ircmd == 0xDEADBEEF) { + return data->sw_changed != 0; + } + + /* + * We have an ircmd which is not empty: + * Data[1] should be the complement of Data[0] + */ + if (ircmd[0] != (u8_t)~ircmd[1]) { + return 0; + } + +#ifdef UBICOM32HID_STRICT_IR_CHECK + /* + * It seems that some remote controls don't follow the NEC protocol + * properly, so only do this check if the remote does indeed follow the + * spec. Data[3] should be the complement of Data[2] + */ + if (ircmd[2] == (u8_t)~ircmd[3]) { + return 1; + } + + /* + * For non-compliant remotes, check the system code according to what + * they send. + */ + if ((ircmd[2] != UBICOM32HID_IR_SYSTEM_CODE_CHECK) || + (ircmd[3] != UBICOM32HID_IR_SYSTEM_CODE)) { + return 0; + } +#endif + + /* + * Data checks out, process + */ + return 1; +} + +/* + * ubicom32hid_poll_input + * Poll the input from the HID device. + */ +static void ubicom32hid_poll_input(struct input_polled_dev *dev) +{ + struct ubicom32hid_data *ud = (struct ubicom32hid_data *)dev->private; + const struct ubicom32hid_platform_data *pdata = ud->pdata; + struct ubicom32hid_input_data data; + struct input_dev *id = dev->input; + int i; + int sync_needed = 0; + uint8_t cmd; + int ret; + + /* + * Flush the queue + */ + cmd = UBICOM32HID_CMD_FLUSH; + ret = i2c_master_send(ud->client, &cmd, 1); + if (ret < 0) { + return; + } + + ret = i2c_smbus_read_i2c_block_data( + ud->client, UBICOM32HID_CMD_GET_IR_SWITCH, 6, (void *)&data); + if (ret < 0) { + return; + } + + /* + * Verify the data to see if there is any action to be taken + */ + if (!ubicom32hid_verify_data(ud, &data)) { + return; + } + +#ifdef DEBUG + if (ubicom32hid_debug) { + printk("Polled ircmd=%8x swstate=%2x swchanged=%2x\n", + data.ircmd, data.sw_state, data.sw_changed); + } +#endif + + /* + * Process changed switches + */ + if (data.sw_changed) { + const struct ubicom32hid_button *ub = pdata->buttons; + for (i = 0; i < pdata->nbuttons; i++, ub++) { + uint8_t mask = (1 << ub->bit); + if (!(data.sw_changed & mask)) { + continue; + } + + sync_needed = 1; + input_event(id, ub->type, ub->code, + (data.sw_state & mask) ? 1 : 0); + } + } + if (sync_needed) { + input_sync(id); + } + + /* + * Process ir codes + */ + if (data.ircmd != 0xDEADBEEF) { + const struct ubicom32hid_ir *ui = pdata->ircodes; + for (i = 0; i < pdata->nircodes; i++, ui++) { + if (ui->ir_code == data.ircmd) { + /* + * Simulate a up/down event + */ + input_event(id, ui->type, ui->code, 1); + input_sync(id); + input_event(id, ui->type, ui->code, 0); + input_sync(id); + } + } + } +} + + +/* + * Backlight ops + */ +static struct backlight_ops ubicom32hid_blops = { + .get_brightness = ubicom32hid_get_intensity, + .update_status = ubicom32hid_set_intensity, +}; + +/* + * ubicom32hid_probe + */ +static int ubicom32hid_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct ubicom32hid_platform_data *pdata; + struct ubicom32hid_data *ud; + int ret; + int i; + u8 version[2]; + char buf[1]; + + pdata = client->dev.platform_data; + if (pdata == NULL) { + return -ENODEV; + } + + /* + * See if we even have a device available before allocating memory. + * + * Hard reset the device + */ + ret = gpio_request(pdata->gpio_reset, "ubicom32hid-reset"); + if (ret < 0) { + return ret; + } + gpio_direction_output(pdata->gpio_reset, pdata->gpio_reset_polarity); + udelay(100); + gpio_set_value(pdata->gpio_reset, !pdata->gpio_reset_polarity); + udelay(100); + + /* + * soft reset the device. It sometimes takes a while to do this. + */ + for (i = 0; i < 50; i++) { + buf[0] = UBICOM32HID_CMD_RESET; + ret = i2c_master_send(client, buf, 1); + if (ret > 0) { + break; + } + udelay(10000); + } + if (i == 50) { + dev_warn(&client->dev, "Unable to reset device\n"); + goto fail; + } + + ret = i2c_smbus_read_byte_data(client, UBICOM32HID_CMD_GET_DEVICE_ID); + if (ret != UBICOM32HID_DEVICE_ID) { + dev_warn(&client->dev, "Incorrect device id %02x\n", buf[0]); + ret = -ENODEV; + goto fail; + } + + ret = i2c_smbus_read_byte_data(client, UBICOM32HID_CMD_GET_VERSION); + if (ret < 0) { + dev_warn(&client->dev, "Unable to get version\n"); + goto fail; + } + version[0] = ret; + + ret = i2c_smbus_read_byte_data(client, UBICOM32HID_CMD_GET_REVISION); + if (ret < 0) { + dev_warn(&client->dev, "Unable to get revision\n"); + goto fail; + } + version[1] = ret; + + /* + * Allocate our private data + */ + ud = kzalloc(sizeof(struct ubicom32hid_data), GFP_KERNEL); + if (!ud) { + ret = -ENOMEM; + goto fail; + } + ud->pdata = pdata; + ud->client = client; + + /* + * Register our backlight device + */ + ud->bldev = backlight_device_register(DRIVER_NAME, &client->dev, + ud, &ubicom32hid_blops); + if (IS_ERR(ud->bldev)) { + ret = PTR_ERR(ud->bldev); + goto fail2; + } + platform_set_drvdata(client, ud); + + /* + * Start up the backlight with the requested intensity + */ + ud->bldev->props.power = FB_BLANK_UNBLANK; + ud->bldev->props.max_brightness = + (pdata->type == UBICOM32HID_BL_TYPE_PWM) ? + UBICOM32HID_MAX_BRIGHTNESS_PWM : 1; + if (pdata->default_intensity < ud->bldev->props.max_brightness) { + ud->bldev->props.brightness = pdata->default_intensity; + } else { + dev_warn(&client->dev, "Default brightness out of range, " + "setting to max\n"); + ud->bldev->props.brightness = ud->bldev->props.max_brightness; + } + + ubicom32hid_set_intensity(ud->bldev); + + /* + * Check to see if we have any inputs + */ + if (!pdata->nbuttons && !pdata->nircodes) { + goto done; + } + + /* + * We have buttons or codes, we must register an input device + */ + ud->poll_dev = input_allocate_polled_device(); + if (!ud->poll_dev) { + ret = -ENOMEM; + goto fail3; + } + + /* + * Setup the polling to default to 100ms + */ + ud->poll_dev->poll = ubicom32hid_poll_input; + ud->poll_dev->poll_interval = + pdata->poll_interval ? pdata->poll_interval : 100; + ud->poll_dev->private = ud; + + ud->poll_dev->input->name = + pdata->input_name ? pdata->input_name : "Ubicom32HID"; + ud->poll_dev->input->phys = "ubicom32hid/input0"; + ud->poll_dev->input->dev.parent = &client->dev; + ud->poll_dev->input->id.bustype = BUS_I2C; + + /* + * Set the capabilities by running through the buttons and ir codes + */ + for (i = 0; i < pdata->nbuttons; i++) { + const struct ubicom32hid_button *ub = &pdata->buttons[i]; + + input_set_capability(ud->poll_dev->input, + ub->type ? ub->type : EV_KEY, ub->code); + } + + for (i = 0; i < pdata->nircodes; i++) { + const struct ubicom32hid_ir *ui = &pdata->ircodes[i]; + + input_set_capability(ud->poll_dev->input, + ui->type ? ui->type : EV_KEY, ui->code); + } + + ret = input_register_polled_device(ud->poll_dev); + if (ret) { + goto fail3; + } + +done: + printk(KERN_INFO DRIVER_NAME ": enabled, version=%02x.%02x\n", + version[0], version[1]); + + return 0; + +fail3: + gpio_free(ud->pdata->gpio_reset); + backlight_device_unregister(ud->bldev); +fail2: + kfree(ud); +fail: + gpio_free(pdata->gpio_reset); + return ret; +} + +/* + * ubicom32hid_remove + */ +static int ubicom32hid_remove(struct i2c_client *client) +{ + struct ubicom32hid_data *ud = + (struct ubicom32hid_data *)platform_get_drvdata(client); + + gpio_free(ud->pdata->gpio_reset); + + backlight_device_unregister(ud->bldev); + + if (ud->poll_dev) { + input_unregister_polled_device(ud->poll_dev); + input_free_polled_device(ud->poll_dev); + } + + platform_set_drvdata(client, NULL); + + kfree(ud); + + return 0; +} + +static struct i2c_driver ubicom32hid_driver = { + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + }, + .probe = ubicom32hid_probe, + .remove = __exit_p(ubicom32hid_remove), + .id_table = ubicom32hid_id, +}; + +/* + * ubicom32hid_init + */ +static int __init ubicom32hid_init(void) +{ + return i2c_add_driver(&ubicom32hid_driver); +} +module_init(ubicom32hid_init); + +/* + * ubicom32hid_exit + */ +static void __exit ubicom32hid_exit(void) +{ + i2c_del_driver(&ubicom32hid_driver); +} +module_exit(ubicom32hid_exit); + +MODULE_AUTHOR("Pat Tjin <@ubicom.com>") +MODULE_DESCRIPTION("Ubicom HID driver"); +MODULE_LICENSE("GPL"); diff --git a/target/linux/ubicom32/files/arch/ubicom32/mach-common/ubicom32input.c b/target/linux/ubicom32/files/arch/ubicom32/mach-common/ubicom32input.c new file mode 100644 index 0000000000..e2e0c24d62 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/mach-common/ubicom32input.c @@ -0,0 +1,265 @@ +/* + * arch/ubicom32/mach-common/ubicom32input.c + * Ubicom32 Input driver + * + * based on gpio-keys + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + * + * + * TODO: add groups for inputs which can be sampled together (i.e. I2C) + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/input.h> +#include <linux/input-polldev.h> +#include <linux/delay.h> +#include <linux/gpio.h> + +#include <asm/ubicom32input.h> + +struct ubicom32input_data { + struct ubicom32input_platform_data *pdata; + + struct input_polled_dev *poll_dev; + + /* + * collection of previous states for buttons + */ + u8 prev_state[0]; +}; + +/* + * ubicom32input_poll + */ +static void ubicom32input_poll(struct input_polled_dev *dev) +{ + struct ubicom32input_data *ud = + (struct ubicom32input_data *)dev->private; + struct ubicom32input_platform_data *pdata = ud->pdata; + struct input_dev *id = dev->input; + int i; + int sync_needed = 0; + + for (i = 0; i < pdata->nbuttons; i++) { + const struct ubicom32input_button *ub = &pdata->buttons[i]; + int state = 0; + + int val = gpio_get_value(ub->gpio); + + /* + * Check to see if the state changed from the last time we + * looked + */ + if (val == ud->prev_state[i]) { + continue; + } + + /* + * The state has changed, determine if we are "up" or "down" + */ + ud->prev_state[i] = val; + + if ((!val && ub->active_low) || (val && !ub->active_low)) { + state = 1; + } + + input_event(id, ub->type, ub->code, state); + sync_needed = 1; + } + + if (sync_needed) { + input_sync(id); + } +} + +/* + * ubicom32input_probe + */ +static int __devinit ubicom32input_probe(struct platform_device *pdev) +{ + int i; + struct ubicom32input_data *ud; + struct input_polled_dev *poll_dev; + struct input_dev *input_dev; + struct ubicom32input_platform_data *pdata; + int ret; + + pdata = pdev->dev.platform_data; + if (!pdata) { + return -EINVAL; + } + + ud = kzalloc(sizeof(struct ubicom32input_data) + + pdata->nbuttons, GFP_KERNEL); + if (!ud) { + return -ENOMEM; + } + ud->pdata = pdata; + + poll_dev = input_allocate_polled_device(); + if (!poll_dev) { + ret = -ENOMEM; + goto fail; + } + + platform_set_drvdata(pdev, ud); + + ud->poll_dev = poll_dev; + poll_dev->private = ud; + poll_dev->poll = ubicom32input_poll; + + /* + * Set the poll interval requested, default to 50 msec + */ + if (pdata->poll_interval) { + poll_dev->poll_interval = pdata->poll_interval; + } else { + poll_dev->poll_interval = 50; + } + + /* + * Setup the input device + */ + input_dev = poll_dev->input; + input_dev->name = pdata->name ? pdata->name : "Ubicom32 Input"; + input_dev->phys = "ubicom32input/input0"; + input_dev->dev.parent = &pdev->dev; + input_dev->id.bustype = BUS_HOST; + + /* + * Reserve the GPIOs + */ + for (i = 0; i < pdata->nbuttons; i++) { + const struct ubicom32input_button *ub = &pdata->buttons[i]; + + ret = gpio_request(ub->gpio, + ub->desc ? ub->desc : "ubicom32input"); + if (ret < 0) { + pr_err("ubicom32input: failed to request " + "GPIO %d ret=%d\n", ub->gpio, ret); + goto fail2; + } + + ret = gpio_direction_input(ub->gpio); + if (ret < 0) { + pr_err("ubicom32input: failed to set " + "GPIO %d to input ret=%d\n", ub->gpio, ret); + goto fail2; + } + + /* + * Set the previous state to the non-active stae + */ + ud->prev_state[i] = ub->active_low; + + input_set_capability(input_dev, + ub->type ? ub->type : EV_KEY, ub->code); + } + + /* + * Register + */ + ret = input_register_polled_device(ud->poll_dev); + if (ret) { + goto fail2; + } + + return 0; + +fail2: + /* + * release the GPIOs we have already requested. + */ + while (--i >= 0) { + gpio_free(pdata->buttons[i].gpio); + } + +fail: + printk(KERN_ERR "Ubicom32Input: Failed to register driver %d", ret); + platform_set_drvdata(pdev, NULL); + input_free_polled_device(poll_dev); + kfree(ud); + return ret; +} + +/* + * ubicom32input_remove + */ +static int __devexit ubicom32input_remove(struct platform_device *dev) +{ + struct ubicom32input_data *ud = + (struct ubicom32input_data *)platform_get_drvdata(dev); + int i; + + /* + * Free the GPIOs + */ + for (i = 0; i < ud->pdata->nbuttons; i++) { + gpio_free(ud->pdata->buttons[i].gpio); + } + + platform_set_drvdata(dev, NULL); + input_unregister_polled_device(ud->poll_dev); + input_free_polled_device(ud->poll_dev); + + kfree(ud); + + return 0; +} + +static struct platform_driver ubicom32input_driver = { + .driver = { + .name = "ubicom32input", + .owner = THIS_MODULE, + }, + .probe = ubicom32input_probe, + .remove = __devexit_p(ubicom32input_remove), +}; + +/* + * ubicom32input_init + */ +static int __devinit ubicom32input_init(void) +{ + return platform_driver_register(&ubicom32input_driver); +} + +/* + * ubicom32input_exit + */ +static void __exit ubicom32input_exit(void) +{ + platform_driver_unregister(&ubicom32input_driver); +} + +module_init(ubicom32input_init); +module_exit(ubicom32input_exit); + +MODULE_AUTHOR("Pat Tjin <pattjin@ubicom.com>"); +MODULE_DESCRIPTION("Ubicom32 Input Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:ubicom32-input"); diff --git a/target/linux/ubicom32/files/arch/ubicom32/mach-common/ubicom32input_i2c.c b/target/linux/ubicom32/files/arch/ubicom32/mach-common/ubicom32input_i2c.c new file mode 100644 index 0000000000..b81f1919ca --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/mach-common/ubicom32input_i2c.c @@ -0,0 +1,325 @@ +/* + * arch/ubicom32/mach-common/ubicom32input_i2c.c + * Ubicom32 Input driver for I2C + * Supports PCA953x and family + * + * We hog the I2C device, turning it all to input. + * + * Based on gpio-keys, pca953x + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/input.h> +#include <linux/input-polldev.h> +#include <linux/i2c.h> + +#include <asm/ubicom32input_i2c.h> + +#define UBICOM32INPUT_I2C_REG_INPUT 0 +#define UBICOM32INPUT_I2C_REG_OUTPUT 1 +#define UBICOM32INPUT_I2C_REG_INVERT 2 +#define UBICOM32INPUT_I2C_REG_DIRECTION 3 + +static const struct i2c_device_id ubicom32input_i2c_id[] = { + { "ubicom32in_pca9534", 8, }, + { "ubicom32in_pca9535", 16, }, + { "ubicom32in_pca9536", 4, }, + { "ubicom32in_pca9537", 4, }, + { "ubicom32in_pca9538", 8, }, + { "ubicom32in_pca9539", 16, }, + { "ubicom32in_pca9554", 8, }, + { "ubicom32in_pca9555", 16, }, + { "ubicom32in_pca9557", 8, }, + { "ubicom32in_max7310", 8, }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ubicom32input_i2c_id); + +struct ubicom32input_i2c_data { + struct ubicom32input_i2c_platform_data *pdata; + + struct i2c_client *client; + + struct input_polled_dev *poll_dev; + + /* + * collection of previous states for buttons + */ + uint16_t prev_state; + + uint8_t ngpios; +}; + +/* + * ubicom32input_i2c_write_reg + * writes a register to the I2C device. + */ +static int ubicom32input_i2c_write_reg(struct ubicom32input_i2c_data *ud, + int reg, uint16_t val) +{ + int ret; + + if (ud->ngpios <= 8) { + ret = i2c_smbus_write_byte_data(ud->client, reg, val); + } else { + ret = i2c_smbus_write_word_data(ud->client, reg << 1, val); + } + + if (ret < 0) { + return ret; + } + + return 0; +} + +/* + * ubicom32input_i2c_read_reg + * reads a register from the I2C device. + */ +static int ubicom32input_i2c_read_reg(struct ubicom32input_i2c_data *ud, + int reg, uint16_t *val) +{ + int ret; + + if (ud->ngpios <= 8) { + ret = i2c_smbus_read_byte_data(ud->client, reg); + } else { + ret = i2c_smbus_read_word_data(ud->client, reg); + } + + if (ret < 0) { + return ret; + } + + *val = (uint16_t)ret; + + return 0; +} + +/* + * ubicom32input_i2c_poll + */ +static void ubicom32input_i2c_poll(struct input_polled_dev *dev) +{ + struct ubicom32input_i2c_data *ud = + (struct ubicom32input_i2c_data *)dev->private; + struct ubicom32input_i2c_platform_data *pdata = ud->pdata; + struct input_dev *id = dev->input; + int i; + int sync_needed = 0; + uint16_t val; + uint16_t change_mask; + + /* + * Try to get the input status, if we fail, bail out, maybe we can do it + * next time. + */ + if (ubicom32input_i2c_read_reg(ud, UBICOM32INPUT_I2C_REG_INPUT, &val)) { + return; + } + + /* + * see if anything changed by using XOR + */ + change_mask = ud->prev_state ^ val; + ud->prev_state = val; + + for (i = 0; i < pdata->nbuttons; i++) { + const struct ubicom32input_i2c_button *ub = &pdata->buttons[i]; + uint16_t mask = 1 << ub->bit; + int state = val & mask; + + /* + * Check to see if the state changed from the last time we + * looked + */ + if (!(change_mask & mask)) { + continue; + } + input_event(id, ub->type, ub->code, state); + sync_needed = 1; + } + + if (sync_needed) { + input_sync(id); + } +} + +/* + * ubicom32input_i2c_probe + */ +static int __devinit ubicom32input_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + int i; + struct ubicom32input_i2c_data *ud; + struct input_polled_dev *poll_dev; + struct input_dev *input_dev; + struct ubicom32input_i2c_platform_data *pdata; + int ret; + uint16_t invert_mask = 0; + + pdata = client->dev.platform_data; + if (!pdata) { + return -EINVAL; + } + + ud = kzalloc(sizeof(struct ubicom32input_i2c_data), GFP_KERNEL); + if (!ud) { + return -ENOMEM; + } + ud->pdata = pdata; + ud->client = client; + ud->ngpios = id->driver_data; + + poll_dev = input_allocate_polled_device(); + if (!poll_dev) { + ret = -ENOMEM; + goto fail; + } + + ud->poll_dev = poll_dev; + poll_dev->private = ud; + poll_dev->poll = ubicom32input_i2c_poll; + + /* + * Set the poll interval requested, default to 100 msec + */ + if (pdata->poll_interval) { + poll_dev->poll_interval = pdata->poll_interval; + } else { + poll_dev->poll_interval = 100; + } + + /* + * Setup the input device + */ + input_dev = poll_dev->input; + input_dev->name = pdata->name ? pdata->name : "Ubicom32 Input I2C"; + input_dev->phys = "ubicom32input_i2c/input0"; + input_dev->dev.parent = &client->dev; + input_dev->id.bustype = BUS_I2C; + + /* + * Set the capabilities + */ + for (i = 0; i < pdata->nbuttons; i++) { + const struct ubicom32input_i2c_button *ub = &pdata->buttons[i]; + + if (ub->active_low) { + invert_mask |= (1 << ub->bit); + } + + input_set_capability(input_dev, + ub->type ? ub->type : EV_KEY, ub->code); + } + + /* + * Setup the device (all inputs) + */ + ret = ubicom32input_i2c_write_reg(ud, UBICOM32INPUT_I2C_REG_DIRECTION, + 0xFFFF); + if (ret < 0) { + goto fail; + } + + ret = ubicom32input_i2c_write_reg(ud, UBICOM32INPUT_I2C_REG_INVERT, + invert_mask); + if (ret < 0) { + goto fail; + } + + /* + * Register + */ + ret = input_register_polled_device(ud->poll_dev); + if (ret) { + goto fail; + } + + i2c_set_clientdata(client, ud); + + return 0; + +fail: + printk(KERN_ERR "ubicom32input_i2c: Failed to register driver %d\n", + ret); + input_free_polled_device(poll_dev); + kfree(ud); + return ret; +} + +/* + * ubicom32input_i2c_remove + */ +static int __devexit ubicom32input_i2c_remove(struct i2c_client *client) +{ + struct ubicom32input_i2c_data *ud = + (struct ubicom32input_i2c_data *)i2c_get_clientdata(client); + + i2c_set_clientdata(client, NULL); + input_unregister_polled_device(ud->poll_dev); + input_free_polled_device(ud->poll_dev); + + kfree(ud); + + return 0; +} + +static struct i2c_driver ubicom32input_i2c_driver = { + .driver = { + .name = "ubicom32input_i2c", + .owner = THIS_MODULE, + }, + .remove = __devexit_p(ubicom32input_i2c_remove), + .id_table = ubicom32input_i2c_id, + .probe = ubicom32input_i2c_probe, +}; + +/* + * ubicom32input_i2c_init + */ +static int __devinit ubicom32input_i2c_init(void) +{ + return i2c_add_driver(&ubicom32input_i2c_driver); +} + +/* + * ubicom32input_i2c_exit + */ +static void __exit ubicom32input_i2c_exit(void) +{ + i2c_del_driver(&ubicom32input_i2c_driver); +} + +module_init(ubicom32input_i2c_init); +module_exit(ubicom32input_i2c_exit); + +MODULE_AUTHOR("Pat Tjin <pattjin@ubicom.com>"); +MODULE_DESCRIPTION("Ubicom32 Input Driver I2C"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:ubicom32-input"); diff --git a/target/linux/ubicom32/files/arch/ubicom32/mach-common/usb.c b/target/linux/ubicom32/files/arch/ubicom32/mach-common/usb.c new file mode 100644 index 0000000000..e13f640544 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/mach-common/usb.c @@ -0,0 +1,132 @@ +/* + * arch/ubicom32/mach-common/ip5k_usb.c + * Ubicom32 architecture usb support. + * + * (C) Copyright 2009, Ubicom, Inc. + * Copyright (C) 2007 MontaVista Software, Inc. <source@mvista.com> + * Author: Kevin Hilman + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can + * redistribute it and/or modify it under the terms of the GNU General + * Public License as published by the Free Software Foundation, either + * version 2 of the License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ + +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> +#include <linux/usb/musb.h> +#include <asm/devtree.h> +#include <asm/ip5000.h> +#include "usb_tio.h" + +struct usbtionode *unode = NULL; + +static struct resource usb_resources[] = { + [0] = { + .start = RJ + 0x800, + .end = RJ + 0x1000, + .flags = IORESOURCE_MEM, + }, + [1] = { /* general IRQ */ + .start = 1, /* this is a dummy value, the real irq number is passed from kernel_setup_param */ + .flags = IORESOURCE_IRQ, + }, +}; + + +static struct musb_hdrc_eps_bits musb_eps[] = { + { "ep1_tx", 4, }, + { "ep1_rx", 4, }, + { "ep2_tx", 10, }, + { "ep2_rx", 10, }, + { "ep3_tx", 9, }, + { "ep3_rx", 9, }, + { "ep4_tx", 9, }, + { "ep4_rx", 9, }, + { "ep5_tx", 6, }, + { "ep5_rx", 6, }, +}; + +static struct musb_hdrc_config musb_config = { + .multipoint = true, + .dyn_fifo = false, + .soft_con = true, + .dma = false, + + .num_eps = 6, + .dma_channels = 0, + .ram_bits = 0, + .eps_bits = musb_eps, +}; + +static struct musb_hdrc_platform_data usb_data = { +#ifdef CONFIG_USB_MUSB_OTG + .mode = MUSB_OTG, +#else +#ifdef CONFIG_USB_MUSB_HDRC_HCD + .mode = MUSB_HOST, +#else +#ifdef CONFIG_USB_GADGET_MUSB_HDRC + .mode = MUSB_PERIPHERAL, +#endif +#endif +#endif + .clock = NULL, + .set_clock = NULL, + .config = &musb_config, +}; + +static struct platform_device musb_device = { + .name = "musb_hdrc", + .id = 0, + .dev = { + .platform_data = &usb_data, + .dma_mask = NULL, + .coherent_dma_mask = 0, + }, + .resource = usb_resources, + .num_resources = ARRAY_SIZE(usb_resources), +}; + +struct usbtio_node *usb_node = NULL; +void ubi32_usb_init(void) +{ + /* + * See if the usbtio is in the device tree. + */ + usb_node = (struct usbtio_node *)devtree_find_node("usbtio"); + if (!usb_node) { + printk(KERN_WARNING "usb init failed\n"); + return; + } + + usb_resources[1].start = usb_node->dn.recvirq; + if (platform_device_register(&musb_device) < 0) { + printk(KERN_ERR "Unable to register HS-USB (MUSB) device\n"); + return; + } +} + +void ubi32_usb_int_clr(void) +{ + UBICOM32_IO_PORT(RJ)->int_clr = (1 << 3); +} diff --git a/target/linux/ubicom32/files/arch/ubicom32/mach-common/usb_tio.c b/target/linux/ubicom32/files/arch/ubicom32/mach-common/usb_tio.c new file mode 100644 index 0000000000..95ace6db71 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/mach-common/usb_tio.c @@ -0,0 +1,356 @@ +/* + * arch/ubicom32/mach-common/usb_tio.c + * Linux side Ubicom USB TIO driver + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/slab.h> +#include <asm/devtree.h> +#include "usb_tio.h" + +#ifdef CONFIG_SMP +static DEFINE_SPINLOCK(tio_lock); +#define USB_TIO_LOCK(lock, flag) spin_lock_irqsave(lock, flag) +#define USB_TIO_UNLOCK(lock, flag) spin_unlock_irqrestore(lock, flag) +#define USB_TIO_LOCK_ISLOCKED(lock) spin_try_lock(lock) +#else +#define USB_TIO_LOCK(lock, flag) local_irq_save(flag) +#define USB_TIO_UNLOCK(lock, flag) local_irq_restore(flag) +#endif + +spinlock_t usb_tio_lock; + +/* + * usb_tio_set_hrt_interrupt() + */ +static inline void usb_tio_set_hrt_interrupt(void) +{ + ubicom32_set_interrupt(usb_node->dn.sendirq); +} + +static inline void usb_tio_wait_hrt(void) +{ + while (unlikely(usb_node->pdesc)); +} + +#if defined(USB_TIO_DEBUG) +static void usb_tio_request_verify_magic(volatile struct usb_tio_request *req) +{ + BUG_ON(req->magic != USB_TIO_REQUEST_MAGIC2); +} + +static void usb_tio_request_clear_magic(volatile struct usb_tio_request *req) +{ + req->magic = 0; +} +#endif + +static void usb_tio_request_set_magic(volatile struct usb_tio_request *req) +{ + req->magic = USB_TIO_REQUEST_MAGIC1; +} + +/* + * usb_tio_commit_request() + */ +static inline void usb_tio_commit_request(volatile struct usb_tio_request *request) +{ + wmb(); + usb_node->pdesc = request; + + /* + * next thing to do is alway checking if (usb_node->pdesc == NULL) + * to see if the request is done, so add a mb() here + */ + mb(); + usb_tio_set_hrt_interrupt(); +} + +/* + * usb_tio_read_u16() + * Synchronously read 16 bits. + */ +u8_t usb_tio_read_u16(u32_t address, u16_t *data) +{ + volatile struct usb_tio_request *tio_req = &usb_node->request; + unsigned long flag; + + /* + * Wait for any previous request to complete and then make this request. + */ + USB_TIO_LOCK(&tio_lock, flag); + usb_tio_wait_hrt(); + + /* + * Fill in the request. + */ + tio_req->address = address; + tio_req->cmd = USB_TIO_READ16_SYNC; + USB_TIO_REQUEST_SET_MAGIC(tio_req); + usb_tio_commit_request(tio_req); + + /* + * Wait for the result to show up. + */ + usb_tio_wait_hrt(); + USB_TIO_REQUEST_VERIFY_MAGIC(tio_req); + *data = (u16_t)tio_req->data; + USB_TIO_REQUEST_CLEAR_MAGIC(tio_req); + USB_TIO_UNLOCK(&tio_lock, flag); + return USB_TIO_OK; +} + +/* + * usb_tio_read_u8() + * Synchronously read 16 bits. + */ +u8_t usb_tio_read_u8(u32_t address, u8_t *data) +{ + volatile struct usb_tio_request *tio_req = &usb_node->request; + unsigned long flag; + + /* + * Wait for any previous request to complete and then make this request. + */ + USB_TIO_LOCK(&tio_lock, flag); + usb_tio_wait_hrt(); + + /* + * Fill in the request. + */ + tio_req->address = address; + tio_req->cmd = USB_TIO_READ8_SYNC; + USB_TIO_REQUEST_SET_MAGIC(tio_req); + + /* + * commit the request + */ + usb_tio_commit_request(tio_req); + + /* + * Wait for the result to show up. + */ + usb_tio_wait_hrt(); + USB_TIO_REQUEST_VERIFY_MAGIC(tio_req); + *data = (u8_t)tio_req->data; + USB_TIO_REQUEST_CLEAR_MAGIC(tio_req); + USB_TIO_UNLOCK(&tio_lock, flag); + return USB_TIO_OK; +} + +/* + * usb_tio_write_u16() + * Asynchronously write 16 bits. + */ +u8_t usb_tio_write_u16(u32_t address, u16_t data) +{ + volatile struct usb_tio_request *tio_req = &usb_node->request; + unsigned long flag; + + /* + * Wait for any previous write or pending read to complete. + */ + USB_TIO_LOCK(&tio_lock, flag); + usb_tio_wait_hrt(); + + tio_req->address = address; + tio_req->data = data; + tio_req->cmd = USB_TIO_WRITE16_ASYNC; + USB_TIO_REQUEST_SET_MAGIC(tio_req); + + /* + * commit the request + */ + usb_tio_commit_request(tio_req); + USB_TIO_UNLOCK(&tio_lock, flag); + return USB_TIO_OK; +} + +/* + * usb_tio_write_u8() + * Asynchronously write 8 bits. + */ +u8_t usb_tio_write_u8(u32_t address, u8_t data) +{ + volatile struct usb_tio_request *tio_req = &usb_node->request; + unsigned long flag; + + /* + * Wait for any previous write or pending read to complete. + */ + USB_TIO_LOCK(&tio_lock, flag); + usb_tio_wait_hrt(); + + tio_req->address = address; + tio_req->data = data; + tio_req->cmd = USB_TIO_WRITE8_ASYNC; + USB_TIO_REQUEST_SET_MAGIC(tio_req); + + /* + * commit the request + */ + usb_tio_commit_request(tio_req); + USB_TIO_UNLOCK(&tio_lock, flag); + return USB_TIO_OK; +} + +/* + * usb_tio_read_fifo() + * Synchronously read FIFO. + */ +u8_t usb_tio_read_fifo(u32_t address, u32_t buffer, u32_t bytes) +{ + volatile struct usb_tio_request *tio_req = &usb_node->request; + unsigned long flag; + + /* + * Wait for any previous request to complete and then make this request. + */ + USB_TIO_LOCK(&tio_lock, flag); + usb_tio_wait_hrt(); + + /* + * Fill in the request. + */ + tio_req->address = address; + tio_req->cmd = USB_TIO_READ_FIFO_SYNC; + tio_req->buffer = buffer; + tio_req->transfer_length = bytes; + USB_TIO_REQUEST_SET_MAGIC(tio_req); + + /* + * commit the request + */ + usb_tio_commit_request(tio_req); + + /* + * Wait for the result to show up. + */ + usb_tio_wait_hrt(); + USB_TIO_REQUEST_VERIFY_MAGIC(tio_req); + USB_TIO_REQUEST_CLEAR_MAGIC(tio_req); + USB_TIO_UNLOCK(&tio_lock, flag); + return USB_TIO_OK; +} + +/* + * usb_tio_write_fifo() + * Synchronously write 32 bits. + */ +u8_t usb_tio_write_fifo(u32_t address, u32_t buffer, u32_t bytes) +{ + volatile struct usb_tio_request *tio_req = &usb_node->request; + unsigned long flag; + + USB_TIO_LOCK(&tio_lock, flag); + usb_tio_wait_hrt(); + + tio_req->address = address; + tio_req->buffer = buffer; + tio_req->cmd = USB_TIO_WRITE_FIFO_SYNC; + tio_req->transfer_length = bytes; + USB_TIO_REQUEST_SET_MAGIC(tio_req); + /* + * commit the request + */ + usb_tio_commit_request(tio_req); + + /* + * Wait for the result to show up. + */ + usb_tio_wait_hrt(); + USB_TIO_REQUEST_VERIFY_MAGIC(tio_req); + USB_TIO_REQUEST_CLEAR_MAGIC(tio_req); + USB_TIO_UNLOCK(&tio_lock, flag); + return USB_TIO_OK; +} + +/* + * usb_tio_write_fifo_async() + * Asynchronously write 32 bits. + */ +u8_t usb_tio_write_fifo_async(u32_t address, u32_t buffer, u32_t bytes) +{ + volatile struct usb_tio_request *tio_req = &usb_node->request; + unsigned long flag; + + USB_TIO_LOCK(&tio_lock, flag); + usb_tio_wait_hrt(); + + tio_req->address = address; + + /* + * Is it necessary to make a local copy of the buffer? Any chance the URB is aborted before TIO finished the FIFO write? + */ + tio_req->buffer = buffer; + tio_req->cmd = USB_TIO_WRITE_FIFO_SYNC; + tio_req->transfer_length = bytes; + USB_TIO_REQUEST_SET_MAGIC(tio_req); + /* + * commit the request + */ + usb_tio_commit_request(tio_req); + USB_TIO_UNLOCK(&tio_lock, flag); + return USB_TIO_OK; +} + +/* + * usb_tio_read_int_status() + * read and clear the interrupt status registers + */ +void usb_tio_read_int_status(u8_t *int_usb, u16_t *int_tx, u16_t *int_rx) +{ + + /* + * clear the interrupt must be syncronized with the TIO thread to prevent the racing condiiton + * that TIO thread try to set it at same time + */ + asm volatile ( + "1: bset (%0), (%0), #0 \n\t" \ + " jmpne.f 1b \n\t" \ + : + : "a" (&usb_node->usb_vp_control) + : "memory", "cc" + ); + + *int_usb = usb_node->usb_vp_hw_int_usb; + *int_tx = cpu_to_le16(usb_node->usb_vp_hw_int_tx); + *int_rx = cpu_to_le16(usb_node->usb_vp_hw_int_rx); + + //printk(KERN_INFO "int read %x, %x, %x\n", *int_usb, *int_tx, *int_rx); + + /* + * The interrupt status register is read-clean, so clear it now + */ + usb_node->usb_vp_hw_int_usb = 0; + usb_node->usb_vp_hw_int_tx = 0; + usb_node->usb_vp_hw_int_rx = 0; + + /* + * release the lock bit + */ + usb_node->usb_vp_control &= 0xfffe; +} diff --git a/target/linux/ubicom32/files/arch/ubicom32/mach-common/usb_tio.h b/target/linux/ubicom32/files/arch/ubicom32/mach-common/usb_tio.h new file mode 100644 index 0000000000..a88ea18d59 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/mach-common/usb_tio.h @@ -0,0 +1,111 @@ +/* + * arch/ubicom32/mach-common/usb_tio.h + * Definitions for usb_tio.c + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ + +#include <linux/version.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <asm/devtree.h> +#include <asm/ip5000.h> + +#ifndef _USB_TIO_H +#define _USB_TIO_H + +#undef USB_TIO_DEBUG + +#define USB_TIO_REQUEST_MAGIC1 0x2307 +#define USB_TIO_REQUEST_MAGIC2 0x0789 +#if defined(USB_TIO_DEBUG) +#define USB_TIO_REQUEST_VERIFY_MAGIC(req) usb_tio_request_verify_magic(req) +#define USB_TIO_REQUEST_SET_MAGIC(req) usb_tio_request_set_magic(req) +#define USB_TIO_REQUEST_CLEAR_MAGIC(req) usb_tio_request_clear_magic(req) +#else +#define USB_TIO_REQUEST_VERIFY_MAGIC(req) +#define USB_TIO_REQUEST_SET_MAGIC(req) usb_tio_request_set_magic(req) +#define USB_TIO_REQUEST_CLEAR_MAGIC(req) +#endif + +enum USB_TIO_status { + USB_TIO_OK, + USB_TIO_ERROR, + USB_TIO_ERROR_COMMIT, +}; + +enum USB_TIO_cmds { + USB_TIO_READ16_SYNC, + USB_TIO_READ8_SYNC, + USB_TIO_READ_FIFO_SYNC, + + USB_TIO_WRITE16_ASYNC, + USB_TIO_WRITE8_ASYNC, + USB_TIO_WRITE_FIFO_ASYNC, + + USB_TIO_WRITE16_SYNC, + USB_TIO_WRITE8_SYNC, + USB_TIO_WRITE_FIFO_SYNC, + +}; + +enum USB_TIO_state { + USB_TIO_NORMAL, + USB_TIO_DMA_SETUP, +}; + +struct usb_tio_request { + volatile u32_t address; + union { + volatile u32_t data; + volatile u32_t buffer; + }; + volatile u16_t cmd; + const volatile u16_t status; + volatile u32_t transfer_length; + volatile u32_t thread_mask; + volatile u16_t magic; +}; + +struct usbtio_node { + struct devtree_node dn; + volatile struct usb_tio_request * volatile pdesc; + struct usb_tio_request request; + volatile u32_t usb_vp_config; + volatile u32_t usb_vp_control; + const volatile u32_t usb_vp_status; + volatile u16_t usb_vp_hw_int_tx; + volatile u16_t usb_vp_hw_int_rx; + volatile u8_t usb_vp_hw_int_usb; + volatile u8_t usb_vp_hw_int_mask_usb; + volatile u16_t usb_vp_hw_int_mask_tx; + volatile u16_t usb_vp_hw_int_mask_rx; + +}; + +extern struct usbtio_node *usb_node; +extern void ubi32_usb_init(void); +#endif diff --git a/target/linux/ubicom32/files/arch/ubicom32/mach-common/vdc_tio.c b/target/linux/ubicom32/files/arch/ubicom32/mach-common/vdc_tio.c new file mode 100644 index 0000000000..cde0cb20f1 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/mach-common/vdc_tio.c @@ -0,0 +1,111 @@ +/* + * arch/ubicom32/mach-common/vdc_tio.c + * Generic initialization for VDC + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ + +#include <linux/platform_device.h> +#include <linux/types.h> + +#include <asm/devtree.h> +#include <asm/vdc_tio.h> + +/* + * Resources that this driver uses + */ +static struct resource vdc_tio_resources[] = { + /* + * Send IRQ + */ + [0] = { + /* + * The init routine will query the devtree and fill this in + */ + .flags = IORESOURCE_IRQ, + }, + + /* + * Receive IRQ (optional) + */ + [1] = { + /* + * The init routine will query the devtree and fill this in + */ + .flags = IORESOURCE_IRQ, + }, + + /* + * Memory Mapped Registers + */ + [2] = { + /* + * The init routine will query the devtree and fill this in + */ + .flags = IORESOURCE_MEM, + }, +}; + +/* + * The platform_device structure which is passed to the driver + */ +static struct platform_device vdc_tio_platform_device = { + .name = "ubicom32fb", + .id = -1, + .resource = vdc_tio_resources, + .num_resources = ARRAY_SIZE(vdc_tio_resources), +}; + +/* + * vdc_tio_init + * Checks the device tree and instantiates the driver if found + */ +void __init vdc_tio_init(void) +{ + /* + * Check the device tree for the vdc_tio + */ + struct vdc_tio_node *vdc_node = + (struct vdc_tio_node *)devtree_find_node("vdctio"); + if (!vdc_node) { + printk(KERN_WARNING "No vdc_tio found\n"); + return; + } + + /* + * Fill in the resources and platform data from devtree information + */ + vdc_tio_resources[0].start = vdc_node->dn.sendirq; + vdc_tio_resources[1].start = vdc_node->dn.recvirq; + vdc_tio_resources[2].start = (u32_t)vdc_node->regs; + vdc_tio_resources[2].end = (u32_t)vdc_node->regs + + sizeof(struct vdc_tio_vp_regs); + + /* + * Try to get the device registered + */ + if (platform_device_register(&vdc_tio_platform_device) < 0) { + printk(KERN_WARNING "VDC failed to register\n"); + } +} diff --git a/target/linux/ubicom32/files/arch/ubicom32/mach-ip5k/Kconfig b/target/linux/ubicom32/files/arch/ubicom32/mach-ip5k/Kconfig new file mode 100644 index 0000000000..b53d239657 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/mach-ip5k/Kconfig @@ -0,0 +1,28 @@ + +config IP5170DPF + bool "IP5170DPF" + select UBICOM32_V3 + select I2C + select I2C_GPIO + select FB + select FB_UBICOM32 + select BACKLIGHT_LCD_SUPPORT + select BACKLIGHT_CLASS_DEVICE + select UBICOM_HID + select NEW_LEDS + select LEDS_CLASS + select LEDS_GPIO + help + IP5170 Digital Picture Frame board, 8005-1113, IP5K-BEV-0011-13 v1.3 + +config IP5160DEV + bool "IP5160Dev_Ver1Dot1" + select UBICOM32_V3 + help + Ubicom StreamEngine 5000 Development Board, IP5K-BDV-0004-11 v1.1 + +config IP5160EVAL + bool "IP5160RGWEval_Ver2Rev2" + select UBICOM32_V3 + help + Ubicom StreamEngine 5000 RGW Evaluation Board, IP5K-RGW-0004-11 v2.2 diff --git a/target/linux/ubicom32/files/arch/ubicom32/mach-ip5k/Makefile b/target/linux/ubicom32/files/arch/ubicom32/mach-ip5k/Makefile new file mode 100644 index 0000000000..d02f339bd9 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/mach-ip5k/Makefile @@ -0,0 +1,31 @@ +# +# arch/ubicom32/mach-ip5k/Makefile +# Makefile for boards which have an ip5k on them. +# +# (C) Copyright 2009, Ubicom, Inc. +# +# This file is part of the Ubicom32 Linux Kernel Port. +# +# The Ubicom32 Linux Kernel Port is free software: you can redistribute +# it and/or modify it under the terms of the GNU General Public License +# as published by the Free Software Foundation, either version 2 of the +# License, or (at your option) any later version. +# +# The Ubicom32 Linux Kernel Port is distributed in the hope that it +# will be useful, but WITHOUT ANY WARRANTY; without even the implied +# warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See +# the GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with the Ubicom32 Linux Kernel Port. If not, +# see <http://www.gnu.org/licenses/>. +# +# Ubicom32 implementation derived from (with many thanks): +# arch/m68knommu +# arch/blackfin +# arch/parisc +# + +obj-$(CONFIG_IP5170DPF) += board-ip5170dpf.o +obj-$(CONFIG_IP5160DEV) += board-ip5160dev.o +obj-$(CONFIG_IP5160EVAL) += board-ip5160rgw.o diff --git a/target/linux/ubicom32/files/arch/ubicom32/mach-ip5k/board-ip5160dev.c b/target/linux/ubicom32/files/arch/ubicom32/mach-ip5k/board-ip5160dev.c new file mode 100644 index 0000000000..4fb130d518 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/mach-ip5k/board-ip5160dev.c @@ -0,0 +1,109 @@ +/* + * arch/ubicom32/mach-ip5k/board-ip5160dev.c + * Platform initialization for ip5160dev board. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> + +#include <asm/board.h> +#include <asm/machdep.h> +#ifdef CONFIG_SERIAL_UBI32_SERDES +#include <asm/ubicom32suart.h> +#endif + +/* + * Factory Default Button on the board at PXn + * TODO: This is just a placeholder and it needs to include proper header files + */ +struct ubicom32fdb_platform_data { + int fdb_gpio; + bool fdb_polarity; +}; + +static struct ubicom32fdb_platform_data ip5160dev_fdb_data = { + .fdb_gpio = 0, + .fdb_polarity = true, +}; + +static struct platform_device ip5160dev_fdb_device = { + .name = "ubicom32fdb", + .id = -1, + .dev = { + .platform_data = &ip5160dev_fdb_data, + }, +}; + +#ifdef CONFIG_SERIAL_UBI32_SERDES +static struct resource ip5160dev_ubicom32_suart_resources[] = { + { + .start = RD, + .end = RD, + .flags = IORESOURCE_MEM, + }, + { + .start = PORT_OTHER_INT(RD), + .end = PORT_OTHER_INT(RD), + .flags = IORESOURCE_IRQ, + }, + { + .start = 240000000, + .end = 240000000, + .flags = UBICOM32_SUART_IORESOURCE_CLOCK, + }, +}; + +static struct platform_device ip5160dev_ubicom32_suart_device = { + .name = "ubicom32suart", + .id = -1, + .num_resources = ARRAY_SIZE(ip5160dev_ubicom32_suart_resources), + .resource = ip5160dev_ubicom32_suart_resources, +}; +#endif + +/* + * List of all devices in our system + */ +static struct platform_device *ip5160dev_devices[] __initdata = { +#ifdef CONFIG_SERIAL_UBI32_SERDES + &ip5160dev_ubicom32_suart_device, +#endif + &ip5160dev_fdb_device, +}; + +/* + * ip5160dev_init + * Called to add the devices which we have on this board + */ +static int __init ip5160dev_init(void) +{ + ubi_gpio_init(); + printk(KERN_INFO "%s: registering device resources\n", __FUNCTION__); + platform_add_devices(ip5160dev_devices, ARRAY_SIZE(ip5160dev_devices)); + return 0; +} + +arch_initcall(ip5160dev_init); diff --git a/target/linux/ubicom32/files/arch/ubicom32/mach-ip5k/board-ip5160rgw.c b/target/linux/ubicom32/files/arch/ubicom32/mach-ip5k/board-ip5160rgw.c new file mode 100644 index 0000000000..fb928f79db --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/mach-ip5k/board-ip5160rgw.c @@ -0,0 +1,75 @@ +/* + * arch/ubicom32/mach-ip5k/board-ip5160rgw.c + * Platform initialization for ip5160rgw board. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <asm/board.h> +#include <asm/machdep.h> + +/* + * Factory Default Button on the board at PXn + * TODO: This is just a placeholder and it needs to include proper header files + */ +struct ubicom32fdb_platform_data { + int fdb_gpio; + bool fdb_polarity; +}; + +static struct ubicom32fdb_platform_data ip5160rgw_fdb_data = { + .fdb_gpio = 0, + .fdb_polarity = true, +}; + +static struct platform_device ip5160rgw_fdb_device = { + .name = "ubicom32fdb", + .id = -1, + .dev = { + .platform_data = &ip5160rgw_fdb_data, + }, +}; + +/* + * List of all devices in our system + */ +static struct platform_device *ip5160rgw_devices[] __initdata = { + &ip5160rgw_fdb_device, +}; + +/* + * ip5160rgw_init + * Called to add the devices which we have on this board + */ +static int __init ip5160rgw_init(void) +{ + ubi_gpio_init(); + printk(KERN_INFO "%s: registering device resources\n", __FUNCTION__); + platform_add_devices(ip5160rgw_devices, ARRAY_SIZE(ip5160rgw_devices)); + return 0; +} + +arch_initcall(ip5160rgw_init); diff --git a/target/linux/ubicom32/files/arch/ubicom32/mach-ip5k/board-ip5170dpf.c b/target/linux/ubicom32/files/arch/ubicom32/mach-ip5k/board-ip5170dpf.c new file mode 100644 index 0000000000..ef04dcaa87 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/mach-ip5k/board-ip5170dpf.c @@ -0,0 +1,279 @@ +/* + * arch/ubicom32/mach-ip5k/board-ip5170dpf.c + * Platform initialization for ip5160dpf board. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/leds.h> + +#include <linux/i2c.h> +#include <linux/i2c-gpio.h> + +#include <linux/input.h> +#include <asm/board.h> +#include <asm/machdep.h> +#include <asm/ubicom32hid.h> +#include <asm/vdc_tio.h> + +/* + * LEDs + * + * WLAN PD9 (Note this is shared with MISO, but we don't use it) + * WPS PD8 + * + * TODO: check triggers, are they generic? + */ +static struct gpio_led ip5170dpf_gpio_leds[] = { + { + .name = "d31:green:WLAN1", + .default_trigger = "WLAN1", + .gpio = GPIO_RD_9, + .active_low = 1, + }, + { + .name = "d30:green:WPS", + .default_trigger = "WPS", + .gpio = GPIO_RD_8, + .active_low = 1, + }, +}; + +static struct gpio_led_platform_data ip5170dpf_gpio_led_platform_data = { + .num_leds = 2, + .leds = ip5170dpf_gpio_leds, +}; + +static struct platform_device ip5170dpf_gpio_leds_device = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &ip5170dpf_gpio_led_platform_data, + }, +}; + +/* + * Backlight on the board PD0, hardware PWM + */ +static const struct ubicom32hid_button ip5170dpf_ubicom32hid_buttons[] = { + { + .type = EV_KEY, + .code = KEY_UP, + .bit = 0, + }, + { + .type = EV_KEY, + .code = KEY_LEFT, + .bit = 1, + }, + { + .type = EV_KEY, + .code = KEY_RIGHT, + .bit = 2, + }, + { + .type = EV_KEY, + .code = KEY_DOWN, + .bit = 3, + }, + { + .type = EV_KEY, + .code = KEY_ENTER, + .bit = 4, + }, + { + .type = EV_KEY, + .code = KEY_MENU, + .bit = 5, + }, + { + .type = EV_KEY, + .code = KEY_ESC, + .bit = 7, + }, +}; + +static const struct ubicom32hid_ir ip5170dpf_ubicom32hid_ircodes[] = { + { + .type = EV_KEY, + .code = KEY_UP, + .ir_code = 0xF807916E + }, + { + .type = EV_KEY, + .code = KEY_DOWN, + .ir_code = 0xF20D916E + }, + { + .type = EV_KEY, + .code = KEY_LEFT, + .ir_code = 0xF609916E + }, + { + .type = EV_KEY, + .code = KEY_RIGHT, + .ir_code = 0xF40B916E + }, + { + .type = EV_KEY, + .code = KEY_ENTER, + .ir_code = 0xF50A916E + }, + { /* rotate */ + .type = EV_KEY, + .code = KEY_FN_F1, + .ir_code = 0xF906916E + }, + { + .type = EV_KEY, + .code = KEY_MENU, + .ir_code = 0xF708916E + }, + { /* font size */ + .type = EV_KEY, + .code = KEY_FN_F2, + .ir_code = 0xF30C916E + }, + { + .type = EV_KEY, + .code = KEY_ESC, + .ir_code = 0xF10E916E + }, + { + .type = EV_KEY, + .code = KEY_VOLUMEUP, + .ir_code = 0xF00F916E + }, + { + .type = EV_KEY, + .code = KEY_VOLUMEDOWN, + .ir_code = 0xED12916E + }, + { + .type = EV_KEY, + .code = KEY_MUTE, + .ir_code = 0xEA15916E + }, + { + .type = EV_KEY, + .code = KEY_INFO, + .ir_code = 0xEF10916E + }, + { /* Like */ + .type = EV_KEY, + .code = KEY_FN_F3, + .ir_code = 0xEE11916E + }, + { /* Dislike */ + .type = EV_KEY, + .code = KEY_FN_F4, + .ir_code = 0xEB14916E + }, + { + .type = EV_KEY, + .code = KEY_POWER, + .ir_code = 0xFD02916E + }, +}; + +static struct ubicom32hid_platform_data ip5170dpf_ubicom32hid_platform_data = { + .gpio_reset = GPIO_RA_4, + .gpio_reset_polarity = 0, + .type = UBICOM32HID_BL_TYPE_BINARY, + .invert = 0, + .default_intensity = 1, + .buttons = ip5170dpf_ubicom32hid_buttons, + .nbuttons = ARRAY_SIZE(ip5170dpf_ubicom32hid_buttons), + .ircodes = ip5170dpf_ubicom32hid_ircodes, + .nircodes = ARRAY_SIZE(ip5170dpf_ubicom32hid_ircodes), +}; + +/* + * Devices on the I2C bus + */ +static struct i2c_board_info __initdata ip5170dpf_i2c_board_info[] = { + /* + * U24, ubicom32hid + */ + { + .type = "ubicom32hid", + .addr = 0x08, + .platform_data = &ip5170dpf_ubicom32hid_platform_data, + }, + + /* + * U14, CS4350 DAC, address 0x4B + */ +}; + +/* + * I2C bus on the board, SDA PF13, SCL PF14 + */ +static struct i2c_gpio_platform_data ip5170dpf_i2c_data = { + .sda_pin = GPIO_RF_13, + .scl_pin = GPIO_RF_14, + .sda_is_open_drain = 0, + .scl_is_open_drain = 0, + .scl_is_output_only = 1, + .udelay = 5, +}; + +static struct platform_device ip5170dpf_i2c_device = { + .name = "i2c-gpio", + .id = 0, + .dev = { + .platform_data = &ip5170dpf_i2c_data, + }, +}; + +/* + * List of all devices in our system + */ +static struct platform_device *ip5170dpf_devices[] __initdata = { + &ip5170dpf_i2c_device, + &ip5170dpf_gpio_leds_device, +}; + +/* + * ip5170dpf_init + * Called to add the devices which we have on this board + */ +static int __init ip5170dpf_init(void) +{ + ubi_gpio_init(); + + vdc_tio_init(); + + printk(KERN_INFO "%s: registering device resources\n", __FUNCTION__); + platform_add_devices(ip5170dpf_devices, ARRAY_SIZE(ip5170dpf_devices)); + + printk(KERN_INFO "%s: registering i2c resources\n", __FUNCTION__); + i2c_register_board_info(0, ip5170dpf_i2c_board_info, ARRAY_SIZE(ip5170dpf_i2c_board_info)); + + return 0; +} + +arch_initcall(ip5170dpf_init); diff --git a/target/linux/ubicom32/files/arch/ubicom32/mach-ip7k/Kconfig b/target/linux/ubicom32/files/arch/ubicom32/mach-ip7k/Kconfig new file mode 100644 index 0000000000..8a7f2f1cf0 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/mach-ip7k/Kconfig @@ -0,0 +1,205 @@ +config IP7145DPF + bool "IP7145DPF" + select UBICOM32_V4 + select UBICOM_INPUT + select UBICOM_INPUT_I2C + select RTC_CLASS + select RTC_DRV_S35390A + select I2C + select I2C_GPIO + select GPIO_PCA953X + select FB + select FB_UBICOM32 + select LCD_CLASS_DEVICE + select LCD_UBICOM32POWER + select BACKLIGHT_LCD_SUPPORT + select BACKLIGHT_CLASS_DEVICE + select BACKLIGHT_UBICOM32 + select SND_UBI32 + select MMC_UBICOM32 + select MMC + select MMC_BLOCK + help + IP7145 Digital Picture Frame reference design, supports: + 8007-0410 v1.0 + +config IP7160RGW + bool "IP7160RGW" + select UBICOM32_V4 + select UBICOM_INPUT + select NEW_LEDS + select LEDS_CLASS + select LEDS_GPIO + select SPI + select SPI_UBICOM32_GPIO + select VLAN_8021Q + select UBICOM_SWITCH + select UBICOM_SWITCH_BCM539X + help + Ubicom IP7160 RGW Eval, supports: + 8007-0110 v1.0 + 8007-0111 v1.1 + 8007-0112 v1.2 + +config IP7160RGWLCD + bool "IP7160RGWLCD" + select UBICOM32_V4 + select UBICOM_INPUT + select NEW_LEDS + select LEDS_CLASS + select LEDS_GPIO + select SPI + select SPI_UBICOM32_GPIO + select VLAN_8021Q + select UBICOM_SWITCH + select UBICOM_SWITCH_BCM539X + select INPUT_TOUCHSCREEN + select TOUCHSCREEN_TSC2007 + select FB + select FB_UBICOM32_VIRTUAL + select I2C + select I2C_GPIO + help + Ubicom IP7160 RGW Eval, supports: + 8007-0112 v1.2 + 8007-1410 v1.0 + + With Ubicom LCD Adapter + 8007-0920 v2.0 + 8007-0921 v2.1 + + +config IP7160BRINGUP + bool "IP7160BRINGUP" + select UBICOM32_V4 + select NEW_LEDS + select LEDS_CLASS + select LEDS_GPIO + help + Ubicom IP7160 Bringup, supports: + 8007-0010 v1.0 + +config IP7160DPF + bool "IP7160DPF" + select UBICOM32_V4 + select I2C + select I2C_GPIO + select FB + select FB_UBICOM32 + select BACKLIGHT_LCD_SUPPORT + select BACKLIGHT_CLASS_DEVICE + select SND_UBI32 + select SND_UBI32_AUDIO_CS4350 + select UBICOM_HID + help + IP7160 Digital Picture Frame board, supports: + 8007-0211 Rev 1.1 + +config IP7500MODULE + bool "IP7500MODULE" + select UBICOM32_V4 + help + Ubicom IP7500 CPU Module board, supports: + 8007-0510 v1.0 + 8007-0510A v1.0 + + Please see ip7500module.c for more details. + +config IP7500AV + bool "IP7500AV" + select UBICOM32_V4 + select I2C + select I2C_GPIO + select SND_UBI32 + select SND_UBI32_AUDIO_CS4384 + select FB + select FB_UBICOM32 + help + Ubicom IP7500 Audio Video board, supports: + 8007-0810 v1.0 + + With Ubicom IP7500 CPU Module board: + 8007-0510 v1.0 -or- + 8007-0510A v1.0 + + Please see ip7500av.c for more details. + +config IP7500MEDIA + bool "IP7500MEDIA" + select UBICOM32_V4 + select UBICOM_INPUT_I2C + select RTC_CLASS + select RTC_DRV_S35390A + select I2C + select I2C_GPIO + select GPIO_PCA953X + select FB + select FB_UBICOM32 + select FB_UBICOM32_VIRTUAL + select FB_UBICOM32_VIRTUAL_NOAUTO + select LCD_CLASS_DEVICE + select LCD_UBICOM32POWER + select BACKLIGHT_LCD_SUPPORT + select BACKLIGHT_CLASS_DEVICE + select BACKLIGHT_UBICOM32 + select INPUT_TOUCHSCREEN + select TOUCHSCREEN_TSC2007 + select SOUND + select SND + select SND_UBI32 + select SND_UBI32_AUDIO_CS4350 + select MMC_UBICOM32 + select MMC + select MMC_BLOCK + help + IP7500 Media Board w/ IP7500 CPU Module board, supports: + 8007-0610 v1.0 w/ 8007-0510 v1.0 + 8007-0610 v1.0 w/ 8007-0510 v1.0 NOPHY + 8007-0610 v1.0 w/ 8007-0511 v1.1 NOPHY + + Also supports optional LCD Adapter board: + 8006-0920 v2.0 + 8006-0921 v2.1 + + Please see ip7500media.c for more details. + +config IP7500WSPKR + bool "IP7500WSPKR" + select UBICOM32_V4 + select I2C + select I2C_GPIO + select SOUND + select SND + select SND_UBI32 + select SND_UBI32_AUDIO_CS4350 + help + IP7500 Wireless Speaker Board, supports: + 8007-1210 v1.0 + + Please see ip7500wspkr.c for more details. + +config IP7500IAP + bool "IP7500IAP" + select UBICOM32_V4 + select I2C + select I2C_GPIO + select FB + select FB_UBICOM32_VIRTUAL + select SOUND + select SND + select SND_UBI32 + select SND_UBI32_AUDIO_CS4350 + select RTC_CLASS + select RTC_DRV_S35390A + select INPUT_TOUCHSCREEN + select TOUCHSCREEN_TSC2007 + select BACKLIGHT_LCD_SUPPORT + select BACKLIGHT_CLASS_DEVICE + select BACKLIGHT_UBICOM32 + help + IP7500 Internet Audio Player, supports: + 8007-1110 v1.0 + + Please see ip7500iap.c for more details. + + + Please see ip7500media.c for more details. diff --git a/target/linux/ubicom32/files/arch/ubicom32/mach-ip7k/Makefile b/target/linux/ubicom32/files/arch/ubicom32/mach-ip7k/Makefile new file mode 100644 index 0000000000..f9df397eea --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/mach-ip7k/Makefile @@ -0,0 +1,38 @@ +# +# arch/ubicom32/mach-ip7k/Makefile +# Makefile for ip7k based boards. +# +# (C) Copyright 2009, Ubicom, Inc. +# +# This file is part of the Ubicom32 Linux Kernel Port. +# +# The Ubicom32 Linux Kernel Port is free software: you can redistribute +# it and/or modify it under the terms of the GNU General Public License +# as published by the Free Software Foundation, either version 2 of the +# License, or (at your option) any later version. +# +# The Ubicom32 Linux Kernel Port is distributed in the hope that it +# will be useful, but WITHOUT ANY WARRANTY; without even the implied +# warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See +# the GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with the Ubicom32 Linux Kernel Port. If not, +# see <http://www.gnu.org/licenses/>. +# +# Ubicom32 implementation derived from (with many thanks): +# arch/m68knommu +# arch/blackfin +# arch/parisc +# + +obj-$(CONFIG_IP7145DPF) += board-ip7145dpf.o +obj-$(CONFIG_IP7160RGW) += board-ip7160rgw.o +obj-$(CONFIG_IP7160RGWLCD) += board-ip7160rgw.o +obj-$(CONFIG_IP7160BRINGUP) += board-ip7160bringup.o +obj-$(CONFIG_IP7160DPF) += board-ip7160dpf.o +obj-$(CONFIG_IP7500MODULE) += board-ip7500module.o +obj-$(CONFIG_IP7500MEDIA) += board-ip7500media.o +obj-$(CONFIG_IP7500AV) += board-ip7500av.o +obj-$(CONFIG_IP7500WSPKR) += board-ip7500wspkr.o +obj-$(CONFIG_IP7500IAP) += board-ip7500iap.o diff --git a/target/linux/ubicom32/files/arch/ubicom32/mach-ip7k/board-ip7145dpf.c b/target/linux/ubicom32/files/arch/ubicom32/mach-ip7k/board-ip7145dpf.c new file mode 100644 index 0000000000..d3348d30f7 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/mach-ip7k/board-ip7145dpf.c @@ -0,0 +1,715 @@ +/* + * arch/ubicom32/mach-ip7k/board-ip7145dpf.c + * Board file for IP7145DPF, rev 1.0, P/N 8007-0410 + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> + +#include <linux/input.h> + +#include <linux/i2c.h> +#include <linux/i2c-gpio.h> +#include <linux/i2c/pca953x.h> + +#include <asm/board.h> +#include <asm/machdep.h> +#include <asm/ubicom32input.h> +#include <asm/ubicom32input_i2c.h> +#include <asm/ubicom32bl.h> +#include <asm/ubicom32lcdpower.h> +#include <asm/vdc_tio.h> + +#include <asm/ubicom32sd.h> +#include <asm/sd_tio.h> +#include <asm/devtree.h> +#include <asm/audio.h> + +#include <asm/ring_tio.h> + +/****************************************************************************** + * SD/IO Port F (Slot 1) platform data + */ +static struct resource ip7145dpf_portf_sd_resources[] = { + /* + * Send IRQ + */ + [0] = { + /* + * The init routine will query the devtree and fill this in + */ + .flags = IORESOURCE_IRQ, + }, + + /* + * Receive IRQ + */ + [1] = { + /* + * The init routine will query the devtree and fill this in + */ + .flags = IORESOURCE_IRQ, + }, + + /* + * Memory Mapped Registers + */ + [2] = { + /* + * The init routine will query the devtree and fill this in + */ + .flags = IORESOURCE_MEM, + }, +}; + +static struct ubicom32sd_card ip7145dpf_portf_sd_cards[] = { + [0] = { + .pin_wp = IP7145DPF_IOB0, + .wp_polarity = 1, + .pin_pwr = IP7145DPF_IOB4, + .pin_cd = GPIO_RA_4, + }, + [1] = { + .pin_wp = IP7145DPF_IOB1, + .wp_polarity = 1, + .pin_pwr = IP7145DPF_IOB5, + .pin_cd = GPIO_RA_6, + }, +}; + +static struct ubicom32sd_platform_data ip7145dpf_portf_sd_platform_data = { + .ncards = 2, + .cards = ip7145dpf_portf_sd_cards, +}; + +static struct platform_device ip7145dpf_portf_sd_device = { + .name = "ubicom32sd", + .id = 0, + .resource = ip7145dpf_portf_sd_resources, + .num_resources = ARRAY_SIZE(ip7145dpf_portf_sd_resources), + .dev = { + .platform_data = &ip7145dpf_portf_sd_platform_data, + }, + +}; + +/* + * ip7145dpf_portf_sd_init + */ +static void ip7145dpf_portf_sd_init(void) +{ + /* + * Check the device tree for the sd_tio + */ + struct sd_tio_node *sd_node = (struct sd_tio_node *)devtree_find_node("portf_sd"); + if (!sd_node) { + printk(KERN_INFO "PortF SDTIO not found\n"); + return; + } + + /* + * Fill in the resources and platform data from devtree information + */ + ip7145dpf_portf_sd_resources[0].start = sd_node->dn.sendirq; + ip7145dpf_portf_sd_resources[1].start = sd_node->dn.recvirq; + ip7145dpf_portf_sd_resources[2].start = (u32_t)&(sd_node->regs); + ip7145dpf_portf_sd_resources[2].end = (u32_t)&(sd_node->regs) + sizeof(sd_node->regs); + + platform_device_register(&ip7145dpf_portf_sd_device); +} + +/****************************************************************************** + * SD/IO Port B (Slot 2) platform data + */ +static struct resource ip7145dpf_portb_sd_resources[] = { + /* + * Send IRQ + */ + [0] = { + /* + * The init routine will query the devtree and fill this in + */ + .flags = IORESOURCE_IRQ, + }, + + /* + * Receive IRQ + */ + [1] = { + /* + * The init routine will query the devtree and fill this in + */ + .flags = IORESOURCE_IRQ, + }, + + /* + * Memory Mapped Registers + */ + [2] = { + /* + * The init routine will query the devtree and fill this in + */ + .flags = IORESOURCE_MEM, + }, +}; + +static struct ubicom32sd_card ip7145dpf_portb_sd_cards[] = { + [0] = { + .pin_wp = IP7145DPF_IOB2, + .wp_polarity = 1, + .pin_pwr = IP7145DPF_IOB6, + .pin_cd = IP7145DPF_IOB3, + }, +}; + +static struct ubicom32sd_platform_data ip7145dpf_portb_sd_platform_data = { + .ncards = 1, + .cards = ip7145dpf_portb_sd_cards, +}; + +static struct platform_device ip7145dpf_portb_sd_device = { + .name = "ubicom32sd", + .id = 1, + .resource = ip7145dpf_portb_sd_resources, + .num_resources = ARRAY_SIZE(ip7145dpf_portb_sd_resources), + .dev = { + .platform_data = &ip7145dpf_portb_sd_platform_data, + }, + +}; + +/* + * ip7145dpf_portb_sd_init + */ +static void ip7145dpf_portb_sd_init(void) +{ + /* + * Check the device tree for the sd_tio + */ + struct sd_tio_node *sd_node = (struct sd_tio_node *)devtree_find_node("portb_sd"); + if (!sd_node) { + printk(KERN_INFO "PortB SDTIO not found\n"); + return; + } + + /* + * Fill in the resources and platform data from devtree information + */ + ip7145dpf_portb_sd_resources[0].start = sd_node->dn.sendirq; + ip7145dpf_portb_sd_resources[1].start = sd_node->dn.recvirq; + ip7145dpf_portb_sd_resources[2].start = (u32_t)&(sd_node->regs); + ip7145dpf_portb_sd_resources[2].end = (u32_t)&(sd_node->regs) + sizeof(sd_node->regs); + + platform_device_register(&ip7145dpf_portb_sd_device); +} + + +#ifdef IP7145DPF_USE_MMC_SPI +/****************************************************************************** + * SPI over GPIO (MMC_SPI) + */ +#include <linux/spi/spi.h> +#include <linux/spi/mmc_spi.h> +#include <linux/mmc/host.h> +#include <asm/ubicom32-spi-gpio.h> + +#define MMC_CS GPIO_RF_5 // PF5 D3 +#define MMC_CD GPIO_RA_4 // PA4 CD +#define MMC_WP IP7145DPF_IOB0 // IOB0 WP +#define MMC_PWR IP7145DPF_IOB4 // IOB4 PWR + +/* + * SPI bus over GPIO (for SD card) + */ +static struct ubicom32_spi_gpio_platform_data ip7145dpf_spi_gpio_data = { + .pin_mosi = GPIO_RF_0, // PF0 CMD + .pin_miso = GPIO_RF_2, // PF2 D0 + .pin_clk = GPIO_RF_1, // PF1 CLK + .bus_num = 0, // We'll call this SPI bus 0 + .num_chipselect = 1, // only one device on this SPI bus +}; + +static struct platform_device ip7145dpf_spi_gpio_device = { + .name = "ubicom32-spi-gpio", + .id = 0, + .dev = { + .platform_data = &ip7145dpf_spi_gpio_data, + }, +}; + +/* + * ip7145dpf_mmc_spi_setpower_slot_a + * Set the power state for slot A + */ +static void ip7145dpf_mmc_spi_setpower_slot_a(struct device *dev, unsigned int vdd) +{ + struct mmc_spi_platform_data *pd = dev->platform_data; + + /* + * Power is inverted, we could tell the IOB to do it, but it's cleaner this way. + */ + if ((1 << vdd) & pd->ocr_mask) { + gpio_set_value(MMC_PWR, 0); + return; + } + gpio_set_value(MMC_PWR, 1); +} + +/* + * ip7145dpf_mmc_spi_get_cd_slot_a + * Get the CD bit for slot A + */ +static int ip7145dpf_mmc_spi_get_cd_slot_a(struct device *dev) +{ + /* + * Note that the sense of the GPIO is inverted + */ + return !gpio_get_value(MMC_CD); +} + +/* + * ip7145dpf_mmc_spi_get_ro_slot_a + * Get the WP bit for slot A + */ +static int ip7145dpf_mmc_spi_get_ro_slot_a(struct device *dev) +{ + /* + * Note that the sense of the GPIO is inverted, we could tell the IOB to do it, but + * it's clearer this way. + */ + return !gpio_get_value(MMC_WP); +} + +/* + * ip7145dpf_mmc_spi_exit_slot_a + * Free the appropriate GPIOs for slot A SD slot. + */ +static void ip7145dpf_mmc_spi_exit_slot_a(struct device *dev, void *appdata) +{ + gpio_free(MMC_CD); + gpio_free(MMC_CS); + gpio_free(MMC_WP); + gpio_free(MMC_PWR); + platform_device_unregister(&ip7145dpf_spi_gpio_device); +} + +/* + * ip7145dpf_mmc_spi_init_slot_a + * Allocate the appropriate GPIOs for slot A SD slot. + * WP is on IOB0, CD is PA4, CS is on PF5 + * TODO: make CD an interrupt + */ +static int ip7145dpf_mmc_spi_init_slot_a(void) +{ + int ret = gpio_request(MMC_CD, "mmc-a-cd"); + if (ret) { + printk(KERN_ERR "%s: could not request mmc-a-cd pin\n", __FUNCTION__); + return -ENOSYS; + } + gpio_direction_input(MMC_CD); + + ret = gpio_request(MMC_CS, "mmc-a-cs"); + if (ret) { + printk(KERN_ERR "%s: could not request mmc-a-cs pin\n", __FUNCTION__); + goto no_cs; + } + gpio_direction_output(MMC_CS, 0); + + ret = gpio_request(MMC_WP, "mmc-a-wp"); + if (ret) { + printk(KERN_ERR "%s: could not request mmc-a-wp pin\n", __FUNCTION__); + goto no_wp; + } + gpio_direction_input(MMC_WP); + + /* + * Start off with power off + */ + ret = gpio_request(MMC_PWR, "mmc-a-pwr"); + if (ret) { + printk(KERN_ERR "%s: could not request mmc-a-pwr pin\n", __FUNCTION__); + goto no_pwr; + } + ret = gpio_direction_output(MMC_PWR, 1); + + return 0; + +no_pwr: + gpio_free(MMC_WP); + +no_wp: + gpio_free(MMC_CS); + +no_cs: + gpio_free(MMC_CD); + return -ENOSYS; +} + +/* + * MMC_SPI driver (currently bitbang) + */ +static struct mmc_spi_platform_data ip7145dpf_mmc_platform_data = { + .ocr_mask = MMC_VDD_33_34, + .exit = ip7145dpf_mmc_spi_exit_slot_a, + .get_ro = ip7145dpf_mmc_spi_get_ro_slot_a, + .get_cd = ip7145dpf_mmc_spi_get_cd_slot_a, + + .setpower = ip7145dpf_mmc_spi_setpower_slot_a, + .powerup_msecs = 500, + + .detect_delay = 100, + + .caps = MMC_CAP_NEEDS_POLL, +}; + +static struct ubicom32_spi_gpio_controller_data ip7145dpf_mmc_controller_data = { + .pin_cs = MMC_CS, +}; + +static struct spi_board_info ip7145dpf_spi_board_info[] = { + { + .modalias = "mmc_spi", + .bus_num = 0, + .chip_select = 0, + .max_speed_hz = 2000000, + .platform_data = &ip7145dpf_mmc_platform_data, + .controller_data = &ip7145dpf_mmc_controller_data, + } +}; +#endif /* IP7145DPF_USE_MMC_SPI */ + +/* + * ip7145dpf_u72_setup + * Called by I2C to tell us that u72 is setup. + * + * This function is called by I2C to tell us that u72 has been setup. All + * devices which rely on this chip being initialized (or even present) need to + * be initialized in this function otherwise they may get initialized too early. + * + * Currently the only device depending on u72 is the SPI + */ +static int __init ip7145dpf_u72_setup(struct i2c_client *client, unsigned gpio, unsigned ngpio, void *context) +{ +#ifdef IP7145DPF_USE_MMC_SPI + if (ip7145dpf_mmc_spi_init_slot_a()) { + printk(KERN_ERR "%s: could not request mmc resources\n", __FUNCTION__); + } else { + printk(KERN_INFO "%s: registering SPI resources\n", __FUNCTION__); + spi_register_board_info(ip7145dpf_spi_board_info, ARRAY_SIZE(ip7145dpf_spi_board_info)); + platform_device_register(&ip7145dpf_spi_gpio_device); + } +#else + /* + * Initialize the Port F/Port B SD slots + */ + ip7145dpf_portf_sd_init(); + ip7145dpf_portb_sd_init(); +#endif + return 0; +} + +/****************************************************************************** + * LCD VGH on the board at PE6 + */ +static struct ubicom32lcdpower_platform_data ip7145dpf_lcdpower_data = { + .vgh_gpio = GPIO_RE_6, + .vgh_polarity = true, +}; + +static struct platform_device ip7145dpf_lcdpower_device = { + .name = "ubicom32lcdpower", + .id = -1, + .dev = { + .platform_data = &ip7145dpf_lcdpower_data, + }, +}; + +/****************************************************************************** + * Backlight on the board PD0, hardware PWM + */ +static struct ubicom32bl_platform_data ip7145dpf_backlight_data = { + .type = UBICOM32BL_TYPE_PWM, + .pwm_channel = 2, + .pwm_prescale = 15, + .pwm_period = 60, + .default_intensity = 0x80, +}; + +static struct platform_device ip7145dpf_backlight_device = { + .name = "ubicom32bl", + .id = -1, + .dev = { + .platform_data = &ip7145dpf_backlight_data, + }, +}; + +/****************************************************************************** + * Ubicom32Input on I2C, U48 MAX7310, address 0x18, 8 bits + */ +static struct ubicom32input_i2c_button ip7145dpf_ubicom32input_i2c_u48_buttons[] = { + { + .type = EV_KEY, + .code = KEY_UP, + .bit = 0, + .active_low = 1, + }, + { + .type = EV_KEY, + .code = KEY_LEFT, + .bit = 1, + .active_low = 1, + }, + { + .type = EV_KEY, + .code = KEY_RIGHT, + .bit = 2, + .active_low = 1, + }, + { + .type = EV_KEY, + .code = KEY_DOWN, + .bit = 3, + .active_low = 1, + }, + { + .type = EV_KEY, + .code = KEY_ENTER, + .bit = 4, + .active_low = 1, + }, + { + .type = EV_KEY, + .code = KEY_MENU, + .bit = 5, + .active_low = 1, + }, + { + .type = EV_KEY, + .code = KEY_ESC, + .bit = 6, + .active_low = 1, + }, +}; + +static struct ubicom32input_i2c_platform_data ip7145dpf_ubicom32input_i2c_u48_platform_data = { + .buttons = ip7145dpf_ubicom32input_i2c_u48_buttons, + .nbuttons = ARRAY_SIZE(ip7145dpf_ubicom32input_i2c_u48_buttons), + .name = "Ubicom32 Input I2C U48", +}; + +/****************************************************************************** + * Additional GPIO chips + */ +static struct pca953x_platform_data ip7145dpf_gpio_u72_platform_data = { + .gpio_base = IP7145DPF_U72_BASE, + .setup = ip7145dpf_u72_setup, +}; + +/****************************************************************************** + * Devices on the I2C bus + */ +static struct i2c_board_info __initdata ip7145dpf_i2c_board_info[] = { + /* + * U51, S35390A RTC, address 0x30 + */ + { + .type = "s35390a", + .addr = 0x30, + }, + + /* + * U48, MAX7310 IO expander, 8 bits, address 0x18 + */ + { + .type = "ubicom32in_max7310", + .addr = 0x18, + .platform_data = &ip7145dpf_ubicom32input_i2c_u48_platform_data, + }, + + /* + * U72, MAX7310 IOB expander, 8 bits, address 0x19 + */ + { + .type = "max7310", + .addr = 0x19, + .platform_data = &ip7145dpf_gpio_u72_platform_data, + }, +}; + +/* + * I2C bus on the board, SDA PE1, SCL PE2 + */ +static struct i2c_gpio_platform_data ip7145dpf_i2c_data = { + .sda_pin = GPIO_RE_1, + .scl_pin = GPIO_RE_2, + .sda_is_open_drain = 0, + .scl_is_open_drain = 0, +}; + +static struct platform_device ip7145dpf_i2c_device = { + .name = "i2c-gpio", + .id = 0, + .dev = { + .platform_data = &ip7145dpf_i2c_data, + }, +}; + +/****************************************************************************** + * Use ubicom32input driver to monitor the various pushbuttons on this board. + * + * WPS PF12 + * FACT_DEFAULT PF13 + * POWER PE4 + * + * Not sutable for the keypad buttons since those run on I2C GPIO. The polling + * of ubicom32input would seem to be excessive for this. + * + * TODO: pick some ubicom understood EV_xxx define for WPS and Fact Default + */ +static struct ubicom32input_button ip7145dpf_ubicom32input_buttons[] = { + { + .type = EV_KEY, + .code = KEY_FN_F1, + .gpio = GPIO_RF_12, + .desc = "WPS", + .active_low = 1, + }, + { + .type = EV_KEY, + .code = KEY_FN_F2, + .gpio = GPIO_RF_13, + .desc = "Factory Default", + .active_low = 1, + }, + { + .type = EV_KEY, + .code = KEY_POWER, + .gpio = GPIO_RE_4, + .desc = "Power", + .active_low = 1, + }, +}; + +static struct ubicom32input_platform_data ip7145dpf_ubicom32input_data = { + .buttons = ip7145dpf_ubicom32input_buttons, + .nbuttons = ARRAY_SIZE(ip7145dpf_ubicom32input_buttons), +}; + +static struct platform_device ip7145dpf_ubicom32input_device = { + .name = "ubicom32input", + .id = -1, + .dev = { + .platform_data = &ip7145dpf_ubicom32input_data, + }, +}; + +/* + * List of all devices in our system + */ +static struct platform_device *ip7145dpf_devices[] __initdata = { + &ip7145dpf_i2c_device, + &ip7145dpf_lcdpower_device, + &ip7145dpf_backlight_device, + &ip7145dpf_ubicom32input_device, +}; + +/* + * ip7145dpf_power_off + * Called to turn the power off for this board + */ +static void ip7145dpf_power_off(void) +{ + gpio_set_value(GPIO_RE_5, 0); +} + +/* + * ip7145dpf_init + * Called to add the devices which we have on this board + */ +static int __init ip7145dpf_init(void) +{ + int ret; + struct platform_device *audio_dev; + + ubi_gpio_init(); + +#ifdef CONFIG_UIO_UBICOM32RING + ring_tio_init("decoder_ring"); +#endif + + /* + * Start up the video driver first + */ + vdc_tio_init(); + + /* + * Take over holding of the power from the system + */ + ret = gpio_request(GPIO_RE_5, "power_hold"); + if (ret) { + printk(KERN_ERR "%s: could not request power hold GPIO\n", __FUNCTION__); + } + gpio_direction_output(GPIO_RE_5, 1); + mach_power_off = ip7145dpf_power_off; + + /* + * USB SEL_HOST_USB line + */ + ret = gpio_request(GPIO_RF_11, "SEL_HOST_USB"); + if (ret) { + printk(KERN_ERR "%s: could not request SEL_HOST_USB GPIO\n", __FUNCTION__); + } + gpio_direction_output(GPIO_RF_11, 0); + + /* + * Setup audio + */ + audio_dev = audio_device_alloc("snd-ubi32-generic", "audio", "audio-i2sout", 0); + if (audio_dev) { + platform_device_register(audio_dev); + } + + /* + * Register all of the devices we have on this board + */ + printk(KERN_INFO "%s: registering device resources\n", __FUNCTION__); + platform_add_devices(ip7145dpf_devices, ARRAY_SIZE(ip7145dpf_devices)); + + /* + * Register all of the devices which sit on the I2C bus + */ + printk(KERN_INFO "%s: registering i2c resources\n", __FUNCTION__); + i2c_register_board_info(0, ip7145dpf_i2c_board_info, ARRAY_SIZE(ip7145dpf_i2c_board_info)); + + /* + * We have to initialize the SPI after the I2C IOB gets setup. SPI is initialized in + * ip7145dpf_u72_setup + */ + + return 0; +} + +arch_initcall(ip7145dpf_init); diff --git a/target/linux/ubicom32/files/arch/ubicom32/mach-ip7k/board-ip7160bringup.c b/target/linux/ubicom32/files/arch/ubicom32/mach-ip7k/board-ip7160bringup.c new file mode 100644 index 0000000000..2527d8d7d3 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/mach-ip7k/board-ip7160bringup.c @@ -0,0 +1,134 @@ +/* + * arch/ubicom32/mach-ip7k/board-ip7160bringup.c + * Support for the IP7160 bringup board. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/leds.h> +#include <linux/delay.h> +#include <linux/input.h> + +#include <asm/board.h> +#include <asm/machdep.h> +#include <asm/ubicom32input.h> + +#ifdef CONFIG_SERIAL_UBI32_SERDES +#include <asm/ubicom32suart.h> +#endif + +/* + * Use ubicom32input driver to monitor the various pushbuttons on this board. + * + * WPS PD5 + * FACT_DEFAULT PD6 + * + * TODO: pick some ubicom understood EV_xxx define for WPS and Fact Default + */ +static struct ubicom32input_button ip7160bringup_ubicom32input_buttons[] = { + { + .type = EV_KEY, + .code = KEY_FN_F1, + .gpio = GPIO_RD_5, + .desc = "WPS", + .active_low = 1, + }, + { + .type = EV_KEY, + .code = KEY_FN_F2, + .gpio = GPIO_RD_6, + .desc = "Factory Default", + .active_low = 1, + }, +}; + +static struct ubicom32input_platform_data ip7160bringup_ubicom32input_data = { + .buttons = ip7160bringup_ubicom32input_buttons, + .nbuttons = ARRAY_SIZE(ip7160bringup_ubicom32input_buttons), +}; + +static struct platform_device ip7160bringup_ubicom32input_device = { + .name = "ubicom32input", + .id = -1, + .dev = { + .platform_data = &ip7160bringup_ubicom32input_data, + }, +}; + +#ifdef CONFIG_SERIAL_UBI32_SERDES +static struct resource ip7160bringup_ubicom32_suart_resources[] = { + { + .start = RE, + .end = RE, + .flags = IORESOURCE_MEM, + }, + { + .start = PORT_OTHER_INT(RE), + .end = PORT_OTHER_INT(RE), + .flags = IORESOURCE_IRQ, + }, + { + .start = 250000000, + .end = 250000000, + .flags = UBICOM32_SUART_IORESOURCE_CLOCK, + }, +}; + +static struct platform_device ip7160bringup_ubicom32_suart_device = { + .name = "ubicom32suart", + .id = -1, + .num_resources = ARRAY_SIZE(ip7160bringup_ubicom32_suart_resources), + .resource = ip7160bringup_ubicom32_suart_resources, +}; +#endif + +/* + * List of all devices in our system + */ +static struct platform_device *ip7160bringup_devices[] __initdata = { +#ifdef CONFIG_SERIAL_UBI32_SERDES + &ip7160bringup_ubicom32_suart_device, +#endif + &ip7160bringup_ubicom32input_device, +}; + +/* + * ip7160bringup_init + * Called to add the devices which we have on this board + */ +static int __init ip7160bringup_init(void) +{ + board_init(); + + ubi_gpio_init(); + + printk(KERN_INFO "%s: registering device resources\n", __FUNCTION__); + platform_add_devices(ip7160bringup_devices, ARRAY_SIZE(ip7160bringup_devices)); + + return 0; +} + +arch_initcall(ip7160bringup_init); diff --git a/target/linux/ubicom32/files/arch/ubicom32/mach-ip7k/board-ip7160dpf.c b/target/linux/ubicom32/files/arch/ubicom32/mach-ip7k/board-ip7160dpf.c new file mode 100644 index 0000000000..7f4e4f3e45 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/mach-ip7k/board-ip7160dpf.c @@ -0,0 +1,326 @@ +/* + * arch/ubicom32/mach-ip7k/board-ip7160dpf.c + * Platform initialization for ip7160dpf board. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/gpio.h> + +#include <linux/i2c.h> +#include <linux/i2c-gpio.h> + +#include <linux/input.h> + +#include <asm/board.h> +#include <asm/machdep.h> +#include <asm/ubicom32hid.h> +#include <asm/vdc_tio.h> +#include <asm/audio.h> + +/* + * Backlight on the board PD0, hardware PWM + */ +static const struct ubicom32hid_button ip7160dpf_ubicom32hid_buttons[] = { + { + .type = EV_KEY, + .code = KEY_UP, + .bit = 0, + }, + { + .type = EV_KEY, + .code = KEY_LEFT, + .bit = 1, + }, + { + .type = EV_KEY, + .code = KEY_RIGHT, + .bit = 2, + }, + { + .type = EV_KEY, + .code = KEY_DOWN, + .bit = 3, + }, + { + .type = EV_KEY, + .code = KEY_ENTER, + .bit = 4, + }, + { + .type = EV_KEY, + .code = KEY_MENU, + .bit = 5, + }, + { + .type = EV_KEY, + .code = KEY_ESC, + .bit = 7, + }, +}; + +static const struct ubicom32hid_ir ip7160dpf_ubicom32hid_ircodes[] = { + { + .type = EV_KEY, + .code = KEY_UP, + .ir_code = 0xF807916E + }, + { + .type = EV_KEY, + .code = KEY_DOWN, + .ir_code = 0xF20D916E + }, + { + .type = EV_KEY, + .code = KEY_LEFT, + .ir_code = 0xF609916E + }, + { + .type = EV_KEY, + .code = KEY_RIGHT, + .ir_code = 0xF40B916E + }, + { + .type = EV_KEY, + .code = KEY_ENTER, + .ir_code = 0xF50A916E + }, + { /* rotate */ + .type = EV_KEY, + .code = KEY_FN_F1, + .ir_code = 0xF906916E + }, + { + .type = EV_KEY, + .code = KEY_MENU, + .ir_code = 0xF708916E + }, + { /* font size */ + .type = EV_KEY, + .code = KEY_FN_F2, + .ir_code = 0xF30C916E + }, + { + .type = EV_KEY, + .code = KEY_ESC, + .ir_code = 0xF10E916E + }, + { + .type = EV_KEY, + .code = KEY_VOLUMEUP, + .ir_code = 0xF00F916E + }, + { + .type = EV_KEY, + .code = KEY_VOLUMEDOWN, + .ir_code = 0xED12916E + }, + { + .type = EV_KEY, + .code = KEY_MUTE, + .ir_code = 0xEA15916E + }, + { + .type = EV_KEY, + .code = KEY_INFO, + .ir_code = 0xEF10916E + }, + { /* Like */ + .type = EV_KEY, + .code = KEY_FN_F3, + .ir_code = 0xEE11916E + }, + { /* Dislike */ + .type = EV_KEY, + .code = KEY_FN_F4, + .ir_code = 0xEB14916E + }, + { + .type = EV_KEY, + .code = KEY_POWER, + .ir_code = 0xFD02916E + }, +}; + +static struct ubicom32hid_platform_data ip7160dpf_ubicom32hid_platform_data = { + .gpio_reset = GPIO_RI_5, + .gpio_reset_polarity = 0, + .type = UBICOM32HID_BL_TYPE_PWM, + .invert = 0, + .default_intensity = 128, + .buttons = ip7160dpf_ubicom32hid_buttons, + .nbuttons = ARRAY_SIZE(ip7160dpf_ubicom32hid_buttons), + .ircodes = ip7160dpf_ubicom32hid_ircodes, + .nircodes = ARRAY_SIZE(ip7160dpf_ubicom32hid_ircodes), +}; + +/* + * Devices on the I2C bus + * This board has a "bus 2" which is isolated from the main bus by U47 + * and pin RI0. It should be safe to always enable bus 2 by setting + * RI0 to low, however, it should be noted that on all existing configurations + * of this board, U49 and U51 are not populated. + */ +static struct i2c_board_info __initdata ip7160dpf_i2c_board_info[] = { + /* + * U37, CS4350 DAC, address 0x4B, bus 2 + * THIS ENTRY MUST BE FIRST + */ + { + .type = "cs4350", + .addr = 0x4B, + } + + /* + * U24, ubicom32hid + */ + { + .type = "ubicom32hid", + .addr = 0x08, + .platform_data = &ip7160dpf_ubicom32hid_platform_data, + }, + + /* + * U49, ISL29001 Ambient Light Sensor, address 0x44, bus 2 (may not be stuffed) + */ + + /* + * U51, S35390A RTC, address 0x30, bus 2 (may not be stuffed) + */ +#ifdef CONFIG_RTC_DRV_S35390A + { + .type = "s35390a", + .addr = 0x30, + }, +#endif +}; + +/* + * I2C bus on the board, SDA PI1, SCL PI2 + */ +static struct i2c_gpio_platform_data ip7160dpf_i2c_data = { + .sda_pin = GPIO_RI_1, + .scl_pin = GPIO_RI_2, + .sda_is_open_drain = 0, + .scl_is_open_drain = 0, + .scl_is_output_only = 1, + .udelay = 6, +}; + +static struct platform_device ip7160dpf_i2c_device = { + .name = "i2c-gpio", + .id = 0, + .dev = { + .platform_data = &ip7160dpf_i2c_data, + }, +}; + +/* + * List of all devices in our system + */ +static struct platform_device *ip7160dpf_devices[] __initdata = { + &ip7160dpf_i2c_device, +}; + +/* + * ip7160dpf_power_off + * Called to turn the power off for this board + */ +static void ip7160dpf_power_off(void) +{ + gpio_set_value(GPIO_RF_14, 0); +} + +/* + * ip7160dpf_init + * Called to add the devices which we have on this board + */ +static int __init ip7160dpf_init(void) +{ + int ret; + struct platform_device *audio_dev; + + ubi_gpio_init(); + + /* + * Hold the POWER_HOLD line + */ + ret = gpio_request(GPIO_RF_14, "POWER_HOLD"); + if (ret) { + printk(KERN_ERR "%s: could not request POWER_HOLD GPIO\n", __FUNCTION__); + } + gpio_direction_output(GPIO_RF_14, 1); + mach_power_off = ip7160dpf_power_off; + + /* + * USB SEL_HOST_USB line + */ + ret = gpio_request(GPIO_RI_13, "SEL_HOST_USB"); + if (ret) { + printk(KERN_ERR "%s: could not request SEL_HOST_USB GPIO\n", __FUNCTION__); + } + gpio_direction_output(GPIO_RI_13, 0); + + /* + * USB/DAC nRESET line + */ + ret = gpio_request(GPIO_RI_3, "USB_DAC_nRESET"); + if (ret) { + printk(KERN_ERR "%s: could not request USB_DAC_nRESET GPIO\n", __FUNCTION__); + } + gpio_direction_output(GPIO_RI_3, 0); + udelay(1); + gpio_direction_output(GPIO_RI_3, 1); + + /* + * I2C BUS2 Disable line + */ + ret = gpio_request(GPIO_RI_0, "DISABLE_BUS2"); + if (ret) { + printk(KERN_ERR "%s: could not request DISABLE_BUS2 GPIO\n", __FUNCTION__); + } + gpio_direction_output(GPIO_RI_0, 0); + + vdc_tio_init(); + + printk(KERN_INFO "%s: registering device resources\n", __FUNCTION__); + platform_add_devices(ip7160dpf_devices, ARRAY_SIZE(ip7160dpf_devices)); + + /* + * Allocate the audio driver if we can + */ + audio_dev = audio_device_alloc("snd-ubi32-cs4350", "audio-i2sout", 0); + if (audio_dev) { + ip7160dpf_i2c_board_info[0].platform_data = audio_dev; + } + + printk(KERN_INFO "%s: registering i2c resources\n", __FUNCTION__); + i2c_register_board_info(0, ip7160dpf_i2c_board_info, ARRAY_SIZE(ip7160dpf_i2c_board_info)); + + return 0; +} + +arch_initcall(ip7160dpf_init); diff --git a/target/linux/ubicom32/files/arch/ubicom32/mach-ip7k/board-ip7160rgw.c b/target/linux/ubicom32/files/arch/ubicom32/mach-ip7k/board-ip7160rgw.c new file mode 100644 index 0000000000..4d50375a7d --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/mach-ip7k/board-ip7160rgw.c @@ -0,0 +1,355 @@ +/* + * arch/ubicom32/mach-ip7k/board-ip7160rgw.c + * Platform initialization for ip7160rgw board. + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/leds.h> +#include <linux/delay.h> +#include <linux/input.h> +#include <linux/spi/spi.h> + +#include <asm/board.h> +#include <asm/machdep.h> +#include <asm/ubicom32input.h> + +#ifdef CONFIG_SERIAL_UBI32_SERDES +#include <asm/ubicom32suart.h> +#endif + +#include <asm/ubicom32-spi-gpio.h> +#include <asm/switch-dev.h> + +#ifdef CONFIG_IP7160RGWLCD +#include <linux/i2c.h> +#include <linux/i2c-gpio.h> +/* + * LCD Adapter board 8007-092x support + * + * Touch controller + * + * Connected via I2C bus, interrupt on PA6 + */ +#include <linux/i2c/tsc2007.h> + +/* + * ip7160rgwlcd_tsc2007_exit_platform_hw + */ +static void ip7160rgwlcd_tsc2007_exit_platform_hw(void) +{ + UBICOM32_IO_PORT(RA)->ctl0 &= ~(0x03 << 17); + gpio_free(GPIO_RA_5); +} + +/* + * ip7160rgwlcd_tsc2007_init_platform_hw + */ +static int ip7160rgwlcd_tsc2007_init_platform_hw(void) +{ + int res = gpio_request(GPIO_RA_5, "TSC2007_IRQ"); + if (res) { + return res; + } + + UBICOM32_IO_PORT(RA)->ctl0 &= ~(0x03 << 17); + UBICOM32_IO_PORT(RA)->ctl0 |= (0x02 << 17); + return 0; +} + +/* + * ip7160rgwlcd_tsc2007_get_pendown_state + */ +static int ip7160rgwlcd_tsc2007_get_pendown_state(void) +{ + return !gpio_get_value(GPIO_RA_5); +} + +static struct tsc2007_platform_data ip7160rgwlcd_tsc2007_data = { + .model = 2007, + .x_plate_ohms = 350, + .get_pendown_state = ip7160rgwlcd_tsc2007_get_pendown_state, + .init_platform_hw = ip7160rgwlcd_tsc2007_init_platform_hw, + .exit_platform_hw = ip7160rgwlcd_tsc2007_exit_platform_hw, +}; + +/****************************************************************************** + * I2C bus on the board, SDA PI14, SCL PI13 + */ +static struct i2c_gpio_platform_data ip7160rgwlcd_i2c_data = { + .sda_pin = GPIO_RI_14, + .scl_pin = GPIO_RI_13, + .sda_is_open_drain = 0, + .scl_is_open_drain = 0, + .udelay = 50, +}; + +static struct platform_device ip7160rgwlcd_i2c_device = { + .name = "i2c-gpio", + .id = 0, + .dev = { + .platform_data = &ip7160rgwlcd_i2c_data, + }, +}; + +static struct i2c_board_info __initdata ip7160rgwlcd_i2c_board_info[] = { + { + .type = "tsc2007", + .addr = 0x48, + .irq = 45, // RA5 + .platform_data = &ip7160rgwlcd_tsc2007_data, + }, +}; + +#endif + +/* + * SPI bus over GPIO for Gigabit Ethernet Switch + * U58: + * MOSI PE0 + * MISO PE1 + * CLK PE3 + * CS PE2 + */ +static struct ubicom32_spi_gpio_platform_data ip7160rgw_spi_gpio_data = { + .pin_mosi = GPIO_RE_0, + .pin_miso = GPIO_RE_1, + .pin_clk = GPIO_RE_3, + .bus_num = 0, // We'll call this SPI bus 0 + .num_chipselect = 1, // only one device on this SPI bus + .clk_default = 1, +}; + +static struct platform_device ip7160rgw_spi_gpio_device = { + .name = "ubicom32-spi-gpio", + .id = 0, + .dev = { + .platform_data = &ip7160rgw_spi_gpio_data, + }, +}; + +static struct ubicom32_spi_gpio_controller_data ip7160rgw_bcm539x_controller_data = { + .pin_cs = GPIO_RE_2, +}; + +static struct switch_core_platform_data ip7160rgw_bcm539x_platform_data = { + .flags = SWITCH_DEV_FLAG_HW_RESET, + .pin_reset = GPIO_RE_4, + .name = "bcm539x", +}; + +static struct spi_board_info ip7160rgw_spi_board_info[] = { + { + .modalias = "bcm539x-spi", + .bus_num = 0, + .chip_select = 0, + .max_speed_hz = 2000000, + .platform_data = &ip7160rgw_bcm539x_platform_data, + .controller_data = &ip7160rgw_bcm539x_controller_data, + .mode = SPI_MODE_3, + } +}; + +/* + * LEDs + * + * WLAN1 PD0 (PWM capable) + * WLAN2 PD1 + * USB2.0 PD2 + * Status PD3 + * WPS PD4 + * + * TODO: check triggers, are they generic? + */ +static struct gpio_led ip7160rgw_gpio_leds[] = { + { + .name = "d53:green:WLAN1", + .default_trigger = "WLAN1", + .gpio = GPIO_RD_0, + .active_low = 1, + }, + { + .name = "d54:green:WLAN2", + .default_trigger = "WLAN2", + .gpio = GPIO_RD_1, + .active_low = 1, + }, + { + .name = "d55:green:USB", + .default_trigger = "USB", + .gpio = GPIO_RD_2, + .active_low = 1, + }, + { + .name = "d56:green:Status", + .default_trigger = "Status", + .gpio = GPIO_RD_3, + .active_low = 1, + }, + { + .name = "d57:green:WPS", + .default_trigger = "WPS", + .gpio = GPIO_RD_4, + .active_low = 1, + }, +}; + +static struct gpio_led_platform_data ip7160rgw_gpio_led_platform_data = { + .num_leds = 5, + .leds = ip7160rgw_gpio_leds, +}; + +static struct platform_device ip7160rgw_gpio_leds_device = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &ip7160rgw_gpio_led_platform_data, + }, +}; + +/* + * Use ubicom32input driver to monitor the various pushbuttons on this board. + * + * WPS PD5 + * FACT_DEFAULT PD6 + * + * TODO: pick some ubicom understood EV_xxx define for WPS and Fact Default + */ +static struct ubicom32input_button ip7160rgw_ubicom32input_buttons[] = { + { + .type = EV_KEY, + .code = KEY_FN_F1, + .gpio = GPIO_RD_5, + .desc = "WPS", + .active_low = 1, + }, + { + .type = EV_KEY, + .code = KEY_FN_F2, + .gpio = GPIO_RD_6, + .desc = "Factory Default", + .active_low = 1, + }, +}; + +static struct ubicom32input_platform_data ip7160rgw_ubicom32input_data = { + .buttons = ip7160rgw_ubicom32input_buttons, + .nbuttons = ARRAY_SIZE(ip7160rgw_ubicom32input_buttons), +}; + +static struct platform_device ip7160rgw_ubicom32input_device = { + .name = "ubicom32input", + .id = -1, + .dev = { + .platform_data = &ip7160rgw_ubicom32input_data, + }, +}; + +#ifdef CONFIG_SERIAL_UBI32_SERDES +static struct resource ip7160rgw_ubicom32_suart_resources[] = { + { + .start = RE, + .end = RE, + .flags = IORESOURCE_MEM, + }, + { + .start = PORT_OTHER_INT(RE), + .end = PORT_OTHER_INT(RE), + .flags = IORESOURCE_IRQ, + }, + { + .start = 250000000, + .end = 250000000, + .flags = UBICOM32_SUART_IORESOURCE_CLOCK, + }, +}; + +static struct platform_device ip7160rgw_ubicom32_suart_device = { + .name = "ubicom32suart", + .id = -1, + .num_resources = ARRAY_SIZE(ip7160rgw_ubicom32_suart_resources), + .resource = ip7160rgw_ubicom32_suart_resources, +}; +#endif + +/* + * List of all devices in our system + */ +static struct platform_device *ip7160rgw_devices[] __initdata = { +#ifdef CONFIG_SERIAL_UBI32_SERDES + &ip7160rgw_ubicom32_suart_device, +#endif + &ip7160rgw_ubicom32input_device, + &ip7160rgw_gpio_leds_device, + &ip7160rgw_spi_gpio_device, +#ifdef CONFIG_IP7160RGWLCD + &ip7160rgwlcd_i2c_device, +#endif +}; + +/* + * ip7160rgw_init + * Called to add the devices which we have on this board + */ +static int __init ip7160rgw_init(void) +{ + board_init(); + + /* + * Rev 1.2 boards have spi in a different place than 1.1/1.0 + */ + if (strcmp(board_get_revision(), "1.2") == 0) { + ip7160rgw_spi_gpio_data.pin_mosi = GPIO_RD_7; + } + + ubi_gpio_init(); + + /* + * Reserve switch SPI CS on behalf on switch driver + */ + if (gpio_request(ip7160rgw_bcm539x_controller_data.pin_cs, "switch-bcm539x-cs")) { + printk(KERN_WARNING "Could not request cs of switch SPI I/F\n"); + return -EIO; + } + gpio_direction_output(ip7160rgw_bcm539x_controller_data.pin_cs, 1); + + printk(KERN_INFO "%s: registering device resources\n", __FUNCTION__); + platform_add_devices(ip7160rgw_devices, ARRAY_SIZE(ip7160rgw_devices)); + + printk(KERN_INFO "%s: registering SPI resources\n", __FUNCTION__); + spi_register_board_info(ip7160rgw_spi_board_info, ARRAY_SIZE(ip7160rgw_spi_board_info)); + +#ifdef CONFIG_IP7160RGWLCD + printk(KERN_INFO "%s: registering i2c resources\n", __FUNCTION__); + i2c_register_board_info(0, ip7160rgwlcd_i2c_board_info, ARRAY_SIZE(ip7160rgwlcd_i2c_board_info)); + printk(KERN_INFO "IP7160 RGW + LCD\n"); +#else + printk(KERN_INFO "IP7160 RGW\n"); +#endif + return 0; +} + +arch_initcall(ip7160rgw_init); diff --git a/target/linux/ubicom32/files/arch/ubicom32/mach-ip7k/board-ip7500av.c b/target/linux/ubicom32/files/arch/ubicom32/mach-ip7k/board-ip7500av.c new file mode 100644 index 0000000000..7cd25fcd39 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/mach-ip7k/board-ip7500av.c @@ -0,0 +1,273 @@ +/* + * arch/ubicom32/mach-ip7k/board-ip7500av.c + * Support for IP7500 Audio Video Board + CPU module board. + * + * This file supports the IP7500 Audio Video Board: + * 8007-0810 Rev 1.0 + * with one of the following CPU module boards: + * 8007-0510 Rev 1.0 + * 8007-0510A Rev 1.0 (with ethernet) + * + * DIP Switch SW2 configuration: (*) default + * POS 1: on(*) = PCI enabled, off = PCI disabled + * POS 2: on(*) = TTYX => PA6, off = TTYX => PF12 + * POS 3: on(*) = TTYY => PA7, off = TTYY => PF15 + * POS 4: unused + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + */ + +#include <linux/platform_device.h> +#include <linux/device.h> +#include <linux/gpio.h> +#include <linux/i2c.h> +#include <linux/i2c-gpio.h> +#include <linux/delay.h> +#include <asm/board.h> +#include <asm/machdep.h> +#include <asm/ring_tio.h> +#include <asm/vdc_tio.h> +#include <asm/audio.h> +#include <asm/ubi32-pcm.h> +#include <asm/ubi32-cs4384.h> + +/****************************************************************************** + * Devices on the I2C bus + * + * BEWARE of changing the order of things in this array as we depend on + * certain things to be in certain places. + */ +static struct i2c_board_info __initdata ip7500av_i2c_board_info[] = { + /* + * U6, CS4384 DAC, address 0x19 + */ + { + .type = "cs4384", + .addr = 0x19, + }, +}; + +/* + * I2C bus on the board, SDA PD1, SCL PD2 + */ +static struct i2c_gpio_platform_data ip7500av_i2c_data = { + .sda_pin = GPIO_RD_6, + .scl_pin = GPIO_RD_3, + .sda_is_open_drain = 0, + .scl_is_open_drain = 0, + .udelay = 50, +}; + +static struct platform_device ip7500av_i2c_device = { + .name = "i2c-gpio", + .id = 0, + .dev = { + .platform_data = &ip7500av_i2c_data, + }, +}; + +/* + * List of possible mclks we can generate. This depends on the CPU frequency. + */ +static struct ubi32_cs4384_mclk_entry ip7500av_cs4384_mclk_entries[] = { + { + .rate = 12288000, + .div = 44, + }, + { + .rate = 11289600, + .div = 48, + }, +}; + +/* + * List of all devices in our system + */ +static struct platform_device *ip7500av_devices[] __initdata = { + &ip7500av_i2c_device, +}; + +/* + * ip7500av_vdac_write + */ +static int __init ip7500av_vdac_write(int reg, int val) +{ + struct i2c_adapter *adap; + struct i2c_msg msg[1]; + unsigned char data[2]; + int err; + + adap = i2c_get_adapter(0); + if (!adap) { + printk(KERN_WARNING "%s: failed to get i2c adapter\n", __FUNCTION__); + return -ENODEV; + } + msg->addr = 0x2B; + msg->flags = 0; + msg->len = 2; + msg->buf = data; + data[0] = reg; + data[1] = val; + err = i2c_transfer(adap, msg, 1); + i2c_put_adapter(adap); + if (err >= 0) { + return 0; + } + return err; +} + +/* + * ip7500av_vdac_init + * Initializes the video DAC via I2C + * + * Equivalent mode line: 720x480p = 27 Mhz, 720 736 800 858 480 484 492 525 + */ +static int __init ip7500av_vdac_init(void) +{ + int err; + + printk(KERN_INFO "Initializing ADV7393 DAC\n"); + + /* + * Reset the VDAC + */ + if (gpio_request(GPIO_RF_6, "VDAC Reset")) { + printk(KERN_WARNING "%s: failed to allocate VDAC Reset\n", __FUNCTION__); + return -EBUSY; + } + gpio_direction_output(GPIO_RF_6, 0); + udelay(1); + gpio_set_value(GPIO_RF_6, 1); + + /* + * See table 100 of ADV7393 data sheet: 16-bit 525p YCrCb In, YPbPr Out + */ + err = ip7500av_vdac_write(0x17, 0x02); + if (err) { + printk(KERN_WARNING "%s: failed to write VDAC\n", __FUNCTION__); + return err; + } + err = ip7500av_vdac_write(0x00, 0x1c); + if (err) { + printk(KERN_WARNING "%s: failed to write VDAC\n", __FUNCTION__); + return err; + } + err = ip7500av_vdac_write(0x01, 0x10); + if (err) { + printk(KERN_WARNING "%s: failed to write VDAC\n", __FUNCTION__); + return err; + } + err = ip7500av_vdac_write(0x31, 0x01); + if (err) { + printk(KERN_WARNING "%s: failed to write VDAC\n", __FUNCTION__); + return err; + } +#ifdef IP7500AV_VDAC_SWAP_PBPR + err = ip7500av_vdac_write(0x35, 0x08); + if (err) { + printk(KERN_WARNING "%s: failed to write VDAC\n", __FUNCTION__); + return err; + } +#endif +#ifdef IP7500AV_VDAC_FULL_RANGE + err = ip7500av_vdac_write(0x30, 0x02); + if (err) { + printk(KERN_WARNING "%s: failed to write VDAC\n", __FUNCTION__); + return err; + } +#endif + return 0; +} +late_initcall(ip7500av_vdac_init); + +/* + * ip7500av_init + * Called to add the devices which we have on this board + */ +static int __init ip7500av_init(void) +{ + struct platform_device *audio_dev; + struct platform_device *audio_dev2; + struct ubi32_cs4384_platform_data *cs4384_pd; + + board_init(); + + ubi_gpio_init(); + + vdc_tio_init(); + + printk(KERN_INFO "%s: registering device resources\n", __FUNCTION__); + platform_add_devices(ip7500av_devices, ARRAY_SIZE(ip7500av_devices)); + + /* + * CS4384 DAC + */ + audio_dev = audio_device_alloc("snd-ubi32-cs4384", "audio", "audio-i2sout", + sizeof(struct ubi32_cs4384_platform_data)); + if (audio_dev) { + /* + * Attempt to figure out a good divisor. This will only work + * assuming the core frequency is compatible. + */ + int i; + unsigned int freq = processor_frequency(); + for (i = 0; i < ARRAY_SIZE(ip7500av_cs4384_mclk_entries); i++) { + unsigned int div; + unsigned int rate = ip7500av_cs4384_mclk_entries[i].rate / 1000; + div = ((freq / rate) + 500) / 1000; + ip7500av_cs4384_mclk_entries[i].div = div; + printk("CS4384 mclk %d rate %u000Hz div %u act %u\n", i, rate, div, freq / div); + } + + cs4384_pd = audio_device_priv(audio_dev); + cs4384_pd->mclk_src = UBI32_CS4384_MCLK_PWM_0; + cs4384_pd->n_mclk = ARRAY_SIZE(ip7500av_cs4384_mclk_entries); + cs4384_pd->mclk_entries = ip7500av_cs4384_mclk_entries; + ip7500av_i2c_board_info[0].platform_data = audio_dev; + + /* + * Reset the DAC + */ + if (gpio_request(GPIO_RF_4, "DAC Reset") == 0) { + gpio_direction_output(GPIO_RF_4, 0); + udelay(1); + gpio_direction_output(GPIO_RF_4, 1); + } else { + printk("Unable to request DAC reset GPIO\n"); + } + } + + /* + * SPDIF port + */ + audio_dev2 = audio_device_alloc("snd-ubi32-generic", "audio", "audio-spdifout", 0); + if (audio_dev2) { + platform_device_register(audio_dev2); + } + + /* + * Register all of the devices which sit on the I2C bus + */ + printk(KERN_INFO "%s: registering i2c resources\n", __FUNCTION__); + i2c_register_board_info(0, ip7500av_i2c_board_info, ARRAY_SIZE(ip7500av_i2c_board_info)); + + printk(KERN_INFO "IP7500 Audio/Video Board\n"); + return 0; +} +arch_initcall(ip7500av_init); diff --git a/target/linux/ubicom32/files/arch/ubicom32/mach-ip7k/board-ip7500iap.c b/target/linux/ubicom32/files/arch/ubicom32/mach-ip7k/board-ip7500iap.c new file mode 100644 index 0000000000..f565cdda17 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/mach-ip7k/board-ip7500iap.c @@ -0,0 +1,414 @@ +/* + * arch/ubicom32/mach-ip7k/board-ip7500iap.c + * Support for IP7500 Internet Audio Player + * + * This file supports the IP7500 Internet Audio Player: + * 8007-1110 Rev 1.0 + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + */ +#include <linux/device.h> +#include <linux/gpio.h> +#include <asm/board.h> + +#include <linux/delay.h> + +#include <linux/platform_device.h> +#include <asm/audio.h> +#include <linux/i2c.h> +#include <linux/i2c-gpio.h> + +#include <asm/ubicom32sd.h> +#include <asm/sd_tio.h> + +#include <asm/ubicom32bl.h> + +#include <asm/machdep.h> + +/****************************************************************************** + * SD/IO Port F (Slot 1) platform data + */ +static struct resource ip7500iap_portf_sd_resources[] = { + /* + * Send IRQ + */ + [0] = { + /* + * The init routine will query the devtree and fill this in + */ + .flags = IORESOURCE_IRQ, + }, + + /* + * Receive IRQ + */ + [1] = { + /* + * The init routine will query the devtree and fill this in + */ + .flags = IORESOURCE_IRQ, + }, + + /* + * Memory Mapped Registers + */ + [2] = { + /* + * The init routine will query the devtree and fill this in + */ + .flags = IORESOURCE_MEM, + }, +}; + +static struct ubicom32sd_card ip7500iap_portf_sd_cards[] = { + [0] = { + .pin_wp = GPIO_RF_7, + .wp_polarity = 1, + .pin_pwr = GPIO_RF_8, + .pin_cd = GPIO_RF_6, + }, +}; + +static struct ubicom32sd_platform_data ip7500iap_portf_sd_platform_data = { + .ncards = 1, + .cards = ip7500iap_portf_sd_cards, +}; + +static struct platform_device ip7500iap_portf_sd_device = { + .name = "ubicom32sd", + .id = 0, + .resource = ip7500iap_portf_sd_resources, + .num_resources = ARRAY_SIZE(ip7500iap_portf_sd_resources), + .dev = { + .platform_data = &ip7500iap_portf_sd_platform_data, + }, + +}; + +/* + * ip7500iap_portf_sd_init + */ +static void ip7500iap_portf_sd_init(void) +{ + /* + * Check the device tree for the sd_tio + */ + struct sd_tio_node *sd_node = (struct sd_tio_node *)devtree_find_node("portf_sd"); + if (!sd_node) { + printk(KERN_INFO "PortF SDTIO not found\n"); + return; + } + + /* + * Fill in the resources and platform data from devtree information + */ + ip7500iap_portf_sd_resources[0].start = sd_node->dn.sendirq; + ip7500iap_portf_sd_resources[1].start = sd_node->dn.recvirq; + ip7500iap_portf_sd_resources[2].start = (u32_t)&(sd_node->regs); + ip7500iap_portf_sd_resources[2].end = (u32_t)&(sd_node->regs) + sizeof(sd_node->regs); + + platform_device_register(&ip7500iap_portf_sd_device); +} + +/****************************************************************************** + * SD/IO Port B (Slot 2) platform data + */ +static struct resource ip7500iap_portb_sd_resources[] = { + /* + * Send IRQ + */ + [0] = { + /* + * The init routine will query the devtree and fill this in + */ + .flags = IORESOURCE_IRQ, + }, + + /* + * Receive IRQ + */ + [1] = { + /* + * The init routine will query the devtree and fill this in + */ + .flags = IORESOURCE_IRQ, + }, + + /* + * Memory Mapped Registers + */ + [2] = { + /* + * The init routine will query the devtree and fill this in + */ + .flags = IORESOURCE_MEM, + }, +}; + +static struct ubicom32sd_card ip7500iap_portb_sd_cards[] = { + [0] = { + .pin_wp = GPIO_RB_13, + .wp_polarity = 1, + .pin_pwr = GPIO_RB_11, + .pin_cd = GPIO_RB_12, + }, +}; + +static struct ubicom32sd_platform_data ip7500iap_portb_sd_platform_data = { + .ncards = 1, + .cards = ip7500iap_portb_sd_cards, +}; + +static struct platform_device ip7500iap_portb_sd_device = { + .name = "ubicom32sd", + .id = 1, + .resource = ip7500iap_portb_sd_resources, + .num_resources = ARRAY_SIZE(ip7500iap_portb_sd_resources), + .dev = { + .platform_data = &ip7500iap_portb_sd_platform_data, + }, + +}; + +/* + * ip7500iap_portb_sd_init + */ +static void ip7500iap_portb_sd_init(void) +{ + /* + * Check the device tree for the sd_tio + */ + struct sd_tio_node *sd_node = (struct sd_tio_node *)devtree_find_node("portb_sd"); + if (!sd_node) { + printk(KERN_INFO "PortB SDTIO not found\n"); + return; + } + + /* + * Fill in the resources and platform data from devtree information + */ + ip7500iap_portb_sd_resources[0].start = sd_node->dn.sendirq; + ip7500iap_portb_sd_resources[1].start = sd_node->dn.recvirq; + ip7500iap_portb_sd_resources[2].start = (u32_t)&(sd_node->regs); + ip7500iap_portb_sd_resources[2].end = (u32_t)&(sd_node->regs) + sizeof(sd_node->regs); + + platform_device_register(&ip7500iap_portb_sd_device); +} + +/****************************************************************************** + * Touch controller + * + * Connected via I2C bus, interrupt on PA6 + */ +#include <linux/i2c/tsc2007.h> + +/* + * ip7500iap_tsc2007_exit_platform_hw + */ +static void ip7500iap_tsc2007_exit_platform_hw(void) +{ + UBICOM32_IO_PORT(RA)->ctl0 &= ~(0x03 << 19); + gpio_free(GPIO_RA_6); +} + +/* + * ip7500iap_tsc2007_init_platform_hw + */ +static int ip7500iap_tsc2007_init_platform_hw(void) +{ + int res = gpio_request(GPIO_RA_6, "TSC2007_IRQ"); + if (res) { + return res; + } + + UBICOM32_IO_PORT(RA)->ctl0 &= ~(0x03 << 19); + UBICOM32_IO_PORT(RA)->ctl0 |= (0x02 << 19); + return 0; +} + +/* + * ip7500iap_tsc2007_get_pendown_state + */ +static int ip7500iap_tsc2007_get_pendown_state(void) +{ + return !gpio_get_value(GPIO_RA_6); +} + +static struct tsc2007_platform_data ip7500iap_tsc2007_data = { + .model = 2007, + .x_plate_ohms = 350, + .get_pendown_state = ip7500iap_tsc2007_get_pendown_state, + .init_platform_hw = ip7500iap_tsc2007_init_platform_hw, + .exit_platform_hw = ip7500iap_tsc2007_exit_platform_hw, +}; + +/****************************************************************************** + * i2c devices + * + * DO NOT CHANGE THE ORDER HERE unless you know how this works. There + * are hardcoded indicies which refer to the order of drivers listed here. + */ +static struct i2c_board_info __initdata ip7500iap_i2c_board_info[] = { + /* + * U6, CS4350 DAC, address 0x4B + */ + { + .type = "cs4350", + .addr = 0x4B, + }, + + /* + * U20, S35390A RTC, address 0x30 + */ + { + .type = "s35390a", + .addr = 0x30, + }, + + /* + * U9, TSC2007 Touch screen controller, address 0x49, irq RA6 + */ + { + .type = "tsc2007", + .addr = 0x49, + .irq = 46, + .platform_data = &ip7500iap_tsc2007_data, + }, +}; + +/* + * I2C bus on the board, SDA PE4, SCL PE5 + */ +static struct i2c_gpio_platform_data ip7500iap_i2c_data = { + .sda_pin = GPIO_RF_14, + .scl_pin = GPIO_RF_13, + .sda_is_open_drain = 0, + .scl_is_open_drain = 0, + .udelay = 50, +}; + +static struct platform_device ip7500iap_i2c_device = { + .name = "i2c-gpio", + .id = 0, + .dev = { + .platform_data = &ip7500iap_i2c_data, + }, +}; + +/****************************************************************************** + * Backlight on the board PD0, hardware PWM + */ +static struct ubicom32bl_platform_data ip7500iap_backlight_data = { + .type = UBICOM32BL_TYPE_PWM, + .pwm_channel = 2, + .pwm_prescale = 15, + .pwm_period = 60, + .default_intensity = 0x80, +}; + +static struct platform_device ip7500iap_backlight_device = { + .name = "ubicom32bl", + .id = -1, + .dev = { + .platform_data = &ip7500iap_backlight_data, + }, +}; + +/****************************************************************************** + * Devices on this board + */ +static struct platform_device *ip7500iap_devices[] __initdata = { + &ip7500iap_i2c_device, + &ip7500iap_backlight_device, +}; + +/* + * ip7500iap_power_off + * Called to turn the power off for this board + */ +static void ip7500iap_power_off(void) +{ + gpio_set_value(GPIO_RF_11, 0); +} + +/* + * ip7500iap_init + * Called to add the devices which we have on this board + */ +static int __init ip7500iap_init(void) +{ + struct platform_device *audio_dev; + struct platform_device *audio_dev2; + int ret; + + board_init(); + + ubi_gpio_init(); + + /* + * Hold the POWER_HOLD line + */ + ret = gpio_request(GPIO_RF_11, "POWER_HOLD"); + if (ret) { + printk(KERN_ERR "%s: could not request POWER_HOLD GPIO\n", __FUNCTION__); + } + gpio_direction_output(GPIO_RF_11, 1); + mach_power_off = ip7500iap_power_off; + + /* + * DAC nRESET line + */ + ret = gpio_request(GPIO_RE_7, "DAC_nRESET"); + if (ret) { + printk(KERN_ERR "%s: could not request DAC_nRESET GPIO\n", __FUNCTION__); + } + gpio_direction_output(GPIO_RE_7, 0); + udelay(1); + gpio_set_value(GPIO_RE_7, 1); + + /* + * Bring up any SDIO slots + */ + ip7500iap_portb_sd_init(); + ip7500iap_portf_sd_init(); + + /* + * Bring up audio devices + */ + platform_add_devices(ip7500iap_devices, ARRAY_SIZE(ip7500iap_devices)); + + audio_dev = audio_device_alloc("snd-ubi32-cs4350", "audio", "audio-i2sout", 0); + if (audio_dev) { + ip7500iap_i2c_board_info[0].platform_data = audio_dev; + } + + audio_dev2 = audio_device_alloc("snd-ubi32-generic", "audio", "audio-spdifout", 0); + if (audio_dev2) { + platform_device_register(audio_dev2); + } + + printk(KERN_INFO "%s: registering i2c resources\n", __FUNCTION__); + i2c_register_board_info(0, ip7500iap_i2c_board_info, ARRAY_SIZE(ip7500iap_i2c_board_info)); + + printk(KERN_INFO "IP7500 Internet Audio Player\n"); + + return 0; +} + +arch_initcall(ip7500iap_init); diff --git a/target/linux/ubicom32/files/arch/ubicom32/mach-ip7k/board-ip7500media.c b/target/linux/ubicom32/files/arch/ubicom32/mach-ip7k/board-ip7500media.c new file mode 100644 index 0000000000..3a51aec2a6 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/mach-ip7k/board-ip7500media.c @@ -0,0 +1,732 @@ +/* + * arch/ubicom32/mach-ip7k/board-ip7500media.c + * Board file for IP7500 media board. + * + * Supports the following configuration + * CPU Module: + * P/N 8007-0510 rev 1.0 NOPHY + * P/N 8007-0511 rev 1.1 NOPHY + * DIP Switch SW2 configuration: + * POS 1: on = PCI enabled + * POS 2: off = TTYX => PF12 + * POS 3: off = TTYY => PF15 + * POS 4: unused + * Media Board: + * P/N 8007-0610 rev 1.0 + * + * LCD Adapter Board: (optional) + * P/N 8007-0920 rev 2.0 + * P/N 8007-0921 rev 2.1 + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> + +#include <linux/input.h> + +#include <linux/i2c.h> +#include <linux/i2c-gpio.h> +#include <linux/i2c/pca953x.h> + +#include <asm/board.h> +#include <asm/machdep.h> +#include <asm/ubicom32input_i2c.h> +#include <asm/ubicom32bl.h> +#include <asm/ubicom32lcdpower.h> +#include <asm/vdc_tio.h> + +#include <asm/ubicom32sd.h> +#include <asm/sd_tio.h> +#include <asm/devtree.h> +#include <asm/audio.h> + +#include <asm/ring_tio.h> + +/****************************************************************************** + * SD/IO Port F (Slot 1) platform data + */ +static struct resource ip7500media_portf_sd_resources[] = { + /* + * Send IRQ + */ + [0] = { + /* + * The init routine will query the devtree and fill this in + */ + .flags = IORESOURCE_IRQ, + }, + + /* + * Receive IRQ + */ + [1] = { + /* + * The init routine will query the devtree and fill this in + */ + .flags = IORESOURCE_IRQ, + }, + + /* + * Memory Mapped Registers + */ + [2] = { + /* + * The init routine will query the devtree and fill this in + */ + .flags = IORESOURCE_MEM, + }, +}; + +static struct ubicom32sd_card ip7500media_portf_sd_cards[] = { + [0] = { + .pin_wp = IP7500MEDIA_IO16, + .wp_polarity = 1, + .pin_pwr = IP7500MEDIA_IO20, + .pin_cd = IP7500MEDIA_IO23, + }, + [1] = { + .pin_wp = IP7500MEDIA_IO17, + .wp_polarity = 1, + .pin_pwr = IP7500MEDIA_IO21, + .pin_cd = IP7500MEDIA_IO24, + }, +}; + +static struct ubicom32sd_platform_data ip7500media_portf_sd_platform_data = { + .ncards = 2, + .cards = ip7500media_portf_sd_cards, +}; + +static struct platform_device ip7500media_portf_sd_device = { + .name = "ubicom32sd", + .id = 0, + .resource = ip7500media_portf_sd_resources, + .num_resources = ARRAY_SIZE(ip7500media_portf_sd_resources), + .dev = { + .platform_data = &ip7500media_portf_sd_platform_data, + }, + +}; + +/* + * ip7500media_portf_sd_init + */ +static void ip7500media_portf_sd_init(void) +{ + /* + * Check the device tree for the sd_tio + */ + struct sd_tio_node *sd_node = (struct sd_tio_node *)devtree_find_node("portf_sd"); + if (!sd_node) { + printk(KERN_INFO "PortF SDTIO not found\n"); + return; + } + + /* + * Fill in the resources and platform data from devtree information + */ + ip7500media_portf_sd_resources[0].start = sd_node->dn.sendirq; + ip7500media_portf_sd_resources[1].start = sd_node->dn.recvirq; + ip7500media_portf_sd_resources[2].start = (u32_t)&(sd_node->regs); + ip7500media_portf_sd_resources[2].end = (u32_t)&(sd_node->regs) + sizeof(sd_node->regs); + + platform_device_register(&ip7500media_portf_sd_device); +} + +/****************************************************************************** + * SD/IO Port B (Slot 2) platform data + */ +static struct resource ip7500media_portb_sd_resources[] = { + /* + * Send IRQ + */ + [0] = { + /* + * The init routine will query the devtree and fill this in + */ + .flags = IORESOURCE_IRQ, + }, + + /* + * Receive IRQ + */ + [1] = { + /* + * The init routine will query the devtree and fill this in + */ + .flags = IORESOURCE_IRQ, + }, + + /* + * Memory Mapped Registers + */ + [2] = { + /* + * The init routine will query the devtree and fill this in + */ + .flags = IORESOURCE_MEM, + }, +}; + +static struct ubicom32sd_card ip7500media_portb_sd_cards[] = { + [0] = { + .pin_wp = IP7500MEDIA_IO19, + .wp_polarity = 1, + .pin_pwr = IP7500MEDIA_IO22, + .pin_cd = IP7500MEDIA_IO18, + }, +}; + +static struct ubicom32sd_platform_data ip7500media_portb_sd_platform_data = { + .ncards = 1, + .cards = ip7500media_portb_sd_cards, +}; + +static struct platform_device ip7500media_portb_sd_device = { + .name = "ubicom32sd", + .id = 1, + .resource = ip7500media_portb_sd_resources, + .num_resources = ARRAY_SIZE(ip7500media_portb_sd_resources), + .dev = { + .platform_data = &ip7500media_portb_sd_platform_data, + }, + +}; + +/* + * ip7500media_portb_sd_init + */ +static void ip7500media_portb_sd_init(void) +{ + /* + * Check the device tree for the sd_tio + */ + struct sd_tio_node *sd_node = (struct sd_tio_node *)devtree_find_node("portb_sd"); + if (!sd_node) { + printk(KERN_INFO "PortB SDTIO not found\n"); + return; + } + + /* + * Fill in the resources and platform data from devtree information + */ + ip7500media_portb_sd_resources[0].start = sd_node->dn.sendirq; + ip7500media_portb_sd_resources[1].start = sd_node->dn.recvirq; + ip7500media_portb_sd_resources[2].start = (u32_t)&(sd_node->regs); + ip7500media_portb_sd_resources[2].end = (u32_t)&(sd_node->regs) + sizeof(sd_node->regs); + + platform_device_register(&ip7500media_portb_sd_device); +} + +/* + * ip7500media_u17_setup + * Called by I2C to tell us that u17 is setup. + * + * This function is called by I2C to tell us that u17 has been setup. All + * devices which rely on this chip being initialized (or even present) need to + * be initialized in this function otherwise they may get initialized too early. + * + * Currently the only device depending on u17 is the SDIO + */ +static int __init ip7500media_u17_setup(struct i2c_client *client, unsigned gpio, unsigned ngpio, void *context) +{ + /* + * Initialize the Port F/Port B SD slots (only the enabled ports will init) + */ + ip7500media_portf_sd_init(); + ip7500media_portb_sd_init(); + + return 0; +} + +/****************************************************************************** + * LCD VGH on the board at PE6 + */ +static struct ubicom32lcdpower_platform_data ip7500media_lcdpower_data = { + .vgh_gpio = GPIO_RE_7, + .vgh_polarity = true, +}; + +static struct platform_device ip7500media_lcdpower_device = { + .name = "ubicom32lcdpower", + .id = -1, + .dev = { + .platform_data = &ip7500media_lcdpower_data, + }, +}; + +/****************************************************************************** + * Backlight on the board PD0, hardware PWM + */ +static struct ubicom32bl_platform_data ip7500media_backlight_data = { + .type = UBICOM32BL_TYPE_PWM, + .pwm_channel = 2, + .pwm_prescale = 15, + .pwm_period = 60, + .default_intensity = 0x80, +}; + +static struct platform_device ip7500media_backlight_device = { + .name = "ubicom32bl", + .id = -1, + .dev = { + .platform_data = &ip7500media_backlight_data, + }, +}; + +/****************************************************************************** + * Ubicom32Input on I2C, U15 MAX7310, address 0x18, 8 bits + */ +static struct ubicom32input_i2c_button ip7500media_ubicom32input_i2c_u15_buttons[] = { + { + .type = EV_KEY, + .code = KEY_LEFT, + .bit = 0, + .active_low = 1, + }, + { + .type = EV_KEY, + .code = KEY_RIGHT, + .bit = 1, + .active_low = 1, + }, + { + .type = EV_KEY, + .code = KEY_UP, + .bit = 2, + .active_low = 1, + }, + { + .type = EV_KEY, + .code = KEY_DOWN, + .bit = 3, + .active_low = 1, + }, + { + .type = EV_KEY, + .code = KEY_ENTER, + .bit = 4, + .active_low = 1, + }, + { + .type = EV_KEY, + .code = KEY_MENU, + .bit = 5, + .active_low = 1, + }, + { + .type = EV_KEY, + .code = KEY_ESC, + .bit = 6, + .active_low = 1, + }, +}; + +static struct ubicom32input_i2c_platform_data ip7500media_ubicom32input_i2c_u15_platform_data = { + .buttons = ip7500media_ubicom32input_i2c_u15_buttons, + .nbuttons = ARRAY_SIZE(ip7500media_ubicom32input_i2c_u15_buttons), + .name = "Ubicom32 Input I2C U15", +}; + +/****************************************************************************** + * Additional GPIO chips + */ +static struct pca953x_platform_data ip7500media_gpio_u16_platform_data = { + .gpio_base = IP7500MEDIA_U16_BASE, +}; + +static struct pca953x_platform_data ip7500media_gpio_u17_platform_data = { + .gpio_base = IP7500MEDIA_U17_BASE, + .setup = ip7500media_u17_setup, +}; + +static struct pca953x_platform_data ip7500media_gpio_u18_platform_data = { + .gpio_base = IP7500MEDIA_U18_BASE, +}; + + +/****************************************************************************** + * Touch controller present on LCD Adapter board + * + * Connected via I2C bus, interrupt on PD1 + */ +#include <linux/i2c/tsc2007.h> + +/* + * ip7500media_tsc2007_exit_platform_hw + */ +static void ip7500media_tsc2007_exit_platform_hw(void) +{ + UBICOM32_IO_PORT(RD)->int_mask &= ~(1 << 11); + UBICOM32_IO_PORT(RD)->ctl2 &= ~(0x03 << 16); + gpio_free(GPIO_RD_1); +} + +/* + * ip7500media_tsc2007_init_platform_hw + */ +static int ip7500media_tsc2007_init_platform_hw(void) +{ + int res = gpio_request(GPIO_RD_1, "TSC2007_IRQ"); + if (res) { + return res; + } + UBICOM32_IO_PORT(RD)->function = 0; + UBICOM32_IO_PORT(RD)->int_mask = (1 << 11); + UBICOM32_IO_PORT(RD)->ctl2 &= ~(0x03 << 16); + UBICOM32_IO_PORT(RD)->ctl2 |= (0x02 << 16); + + return 0; +} + +/* + * ip7500media_tsc2007_clear_penirq + */ +static void ip7500media_tsc2007_clear_penirq(void) +{ + UBICOM32_IO_PORT(RD)->int_clr = (1 << 11); +} + +/* + * ip7500media_tsc2007_get_pendown_state + */ +static int ip7500media_tsc2007_get_pendown_state(void) +{ + return !gpio_get_value(GPIO_RD_1); +} + +static struct tsc2007_platform_data ip7500media_tsc2007_data = { + .model = 2007, + .x_plate_ohms = 350, + .get_pendown_state = ip7500media_tsc2007_get_pendown_state, + .init_platform_hw = ip7500media_tsc2007_init_platform_hw, + .exit_platform_hw = ip7500media_tsc2007_exit_platform_hw, + .clear_penirq = ip7500media_tsc2007_clear_penirq, +}; + +/****************************************************************************** + * Devices on the I2C bus + * + * BEWARE of changing the order of things in this array as we depend on + * certain things to be in certain places. + */ +static struct i2c_board_info __initdata ip7500media_i2c_board_info[] = { + /* + * U6, CS4350 DAC, address 0x4B + */ + { + .type = "cs4350", + .addr = 0x4B, + }, + + /* + * U14, S35390A RTC, address 0x30 + */ + { + .type = "s35390a", + .addr = 0x30, + }, + + /* + * U15, MAX7310 IO expander, 8 bits, address 0x18 + * IO0: User I/O (J16-1) (Left) IO4: User I/O (J16-5) (Enter) + * IO1: User I/O (J16-2) (Right) IO5: User I/O (J16-6) (Menu) + * IO2: User I/O (J16-3) (Up) IO6: User I/O (J16-7) (Back) + * IO3: User I/O (J16-4) (Down) IO7: User I/O (J16-8) + */ + { + .type = "ubicom32in_max7310", + .addr = 0x18, + .platform_data = &ip7500media_ubicom32input_i2c_u15_platform_data, + }, + + /* + * U16, MAX7310 IO expander, 8 bits, address 0x1C + * IO8 : User I/O (J16-9) IO12: User I/O (J16-17) + * IO9 : User I/O (J16-10) IO13: User I/O (J16-18) + * IO10: User I/O (J16-15) IO14: User I/O (J16-19) + * IO11: User I/O (J16-16) IO15: User I/O (J16-20) + */ + { + .type = "max7310", + .addr = 0x1C, + .platform_data = &ip7500media_gpio_u16_platform_data, + }, + + /* + * U17, MAX7310 IO expander, 8 bits, address 0x1A + * IO16: SDIO1A_WP IO20: SD1A_PWREN + * IO17: SDIO1B_WP IO21: SD1B_PWREN + * IO18: SDIO2_CD IO22: SD2_PWREN + * IO19: SDIO2_WP IO23: SDIO1A_CD + * + */ + { + .type = "max7310", + .addr = 0x1A, + .platform_data = &ip7500media_gpio_u17_platform_data, + }, + + /* + * U18, MAX7310 IOB expander, 8 bits, address 0x1E + * IO24: SDIO1B_CD IO28: User I/O TP6 + * IO25: User I/O TP9 IO29: User I/O TP5 + * IO26: User I/O TP8 IO30: User I/O TP4 + * IO27: User I/O TP7 IO31: User I/O TP3 + */ + { + .type = "max7310", + .addr = 0x1E, + .platform_data = &ip7500media_gpio_u18_platform_data, + }, +}; + +/* + * Additional I2C devices to add when a LCD adapter board is present + */ +static struct i2c_board_info __initdata ip7500media_lcd_adapter_i2c_board_info[] = { + { + I2C_BOARD_INFO("tsc2007", 0x48), + .irq = PORT_OTHER_INT(RD), + .platform_data = &ip7500media_tsc2007_data, + }, +}; + +/* + * I2C bus on the board, SDA PE4, SCL PE5 + */ +static struct i2c_gpio_platform_data ip7500media_i2c_data = { + .sda_pin = GPIO_RE_4, + .scl_pin = GPIO_RE_5, + .sda_is_open_drain = 0, + .scl_is_open_drain = 0, + .udelay = 50, +}; + +static struct platform_device ip7500media_i2c_device = { + .name = "i2c-gpio", + .id = 0, + .dev = { + .platform_data = &ip7500media_i2c_data, + }, +}; + +/* + * Virtual Frame Buffer device for use with LCD Adapter + */ +static struct platform_device ip7500media_vfb_device = { + .name = "ubicom32vfb", + .id = -1, +}; + +/* + * vdc_override: + * 0: no override (auto-detect) + * 1: force vdc usage + * 2: force lcd adapter usage + */ +static int __initdata vdc_override = 0; + +/* + * ip7500media_set_forcevdc + * Called when forcevdc is present on the kernel boot line + */ +static int __init ip7500media_set_forcevdc(char *str) +{ + if (str[0] == '1') { + vdc_override = 1; + } else { + vdc_override = 2; + } + return 1; +} + +/* + * ip7500media_video_init + * Called late to determine what kind of video we have on this board + */ +static int __init ip7500media_video_init(void) +{ + struct i2c_adapter *adap; + struct i2c_msg msg[1]; + unsigned char *data; + unsigned char checksum; + int err; + int i; + + if (vdc_override == 1) { + printk(KERN_INFO "Force VDCTIO mode\n"); + goto no_adapter; + } + if (vdc_override == 2) { + printk(KERN_INFO "Force LCD Adapter Board mode\n"); + return 0; + } + + /* + * Check to see if there is an EEPROM out there. If we see an + * EEPROM then we will assume a LCD Adapter Board (8007-092x) + * exists. + */ + data = kmalloc(256, GFP_KERNEL); + if (!data) { + printk(KERN_WARNING "%s: Failed to allocate memory\n", __FUNCTION__); + return -ENOMEM; + } + + adap = i2c_get_adapter(0); + if (!adap) { + printk(KERN_WARNING "%s: Failed to get i2c adapter\n", __FUNCTION__); + kfree(data); + return -ENODEV; + } + data[0] = 0; + msg->addr = 0x50; + msg->flags = 0; + msg->len = 1; + msg->buf = data; + err = i2c_transfer(adap, msg, 1); + if (err < 0) { + goto no_adapter; + } + + msg->addr = 0x50; + msg->flags = I2C_M_RD; + msg->len = 256; + msg->buf = data; + err = i2c_transfer(adap, msg, 1); + if (err < 0) { + goto no_adapter; + } + + i2c_put_adapter(adap); + + /* + * Verify the checksum + */ + checksum = 0xff; + for (i = 0; i < 255; i++) { + checksum ^= data[i]; + } + if (checksum != data[255]) { + printk(KERN_WARNING "%s: Checksum mismatch\n", __FUNCTION__); + } + + kfree(data); + + /* + * Bring up VFB + */ + platform_device_register(&ip7500media_vfb_device); + + /* + * Add the i2c devices on the LCD Adapter board. (We have to use i2c_new_device + * since it's late in the boot process.) + */ + printk(KERN_INFO "%s: registering LCD Adapter board i2c resources\n", __FUNCTION__); + for (i = 0; i < ARRAY_SIZE(ip7500media_lcd_adapter_i2c_board_info); i++) { + i2c_new_device(adap, &ip7500media_lcd_adapter_i2c_board_info[i]); + } + + i2c_put_adapter(adap); + + return 0; + + /* + * No LCD Adapter board, bring up VDC + */ +no_adapter: + vdc_tio_init(); + return 0; +} +late_initcall(ip7500media_video_init); +__setup("forcevdc=", ip7500media_set_forcevdc); + +/* + * ip7500media_init + * Called to add the devices which we have on this board + */ +static int __init ip7500media_init(void) +{ + struct platform_device *audio_dev; + int have_ethernet = (devtree_find_node("eth_lan") != 0); + + board_init(); + + ubi_gpio_init(); + +#ifdef CONFIG_UIO_UBICOM32RING + ring_tio_init("decoder_ring"); +#endif + + /* + * Register all of the devices we have on this board + */ + printk(KERN_INFO "%s: registering device resources\n", __FUNCTION__); + platform_device_register(&ip7500media_i2c_device); + platform_device_register(&ip7500media_backlight_device); + + /* + * If ethernet doesn't exist then we can init the lcdpower + */ + if (!have_ethernet) { + platform_device_register(&ip7500media_lcdpower_device); + } + + /* + * Allocate the audio drivers. SPDIF not supported on boards with ethernet. + */ + audio_dev = audio_device_alloc("snd-ubi32-cs4350", "audio", "audio-i2sout", 0); + if (audio_dev) { + ip7500media_i2c_board_info[0].platform_data = audio_dev; + } + + if (!have_ethernet) { + struct platform_device *audio_dev2; + + audio_dev2 = audio_device_alloc("snd-ubi32-generic", "audio", "audio-spdifout", 0); + if (audio_dev2) { + platform_device_register(audio_dev2); + } + } + + /* + * Register all of the devices which sit on the I2C bus + */ + printk(KERN_INFO "%s: registering i2c resources\n", __FUNCTION__); + i2c_register_board_info(0, ip7500media_i2c_board_info, ARRAY_SIZE(ip7500media_i2c_board_info)); + + /* + * We have to initialize the SDIO after the I2C IOB gets setup. SDIO is initialized in + * ip7500media_u17_setup + */ + + printk("IP7500 Media Board\n"); + + return 0; +} + +arch_initcall(ip7500media_init); diff --git a/target/linux/ubicom32/files/arch/ubicom32/mach-ip7k/board-ip7500module.c b/target/linux/ubicom32/files/arch/ubicom32/mach-ip7k/board-ip7500module.c new file mode 100644 index 0000000000..c8c223a9fd --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/mach-ip7k/board-ip7500module.c @@ -0,0 +1,55 @@ +/* + * arch/ubicom32/mach-ip7k/board-ip7500module.c + * Support for IP7500 CPU module board. + * + * This file supports the IP7500 CPU module board: + * 8007-0510 Rev 1.0 + * 8007-0510A Rev 1.0 (with ethernet) + * + * DIP Switch SW2 configuration: (*) default + * POS 1: on(*) = PCI enabled, off = PCI disabled + * POS 2: on(*) = TTYX => PA6, off = TTYX => PF12 + * POS 3: on(*) = TTYY => PA7, off = TTYY => PF15 + * POS 4: unused + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ +#include <linux/device.h> +#include <linux/gpio.h> +#include <asm/board.h> + +/* + * ip7500module_init + * Called to add the devices which we have on this board + */ +static int __init ip7500module_init(void) +{ + board_init(); + + ubi_gpio_init(); + + return 0; +} + +arch_initcall(ip7500module_init); diff --git a/target/linux/ubicom32/files/arch/ubicom32/mach-ip7k/board-ip7500wspkr.c b/target/linux/ubicom32/files/arch/ubicom32/mach-ip7k/board-ip7500wspkr.c new file mode 100644 index 0000000000..7f27933faa --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/mach-ip7k/board-ip7500wspkr.c @@ -0,0 +1,101 @@ +/* + * arch/ubicom32/mach-ip7k/board-ip7500wspkr.c + * Support for IP7500 Wireless Speaker board. + * + * This file supports the IP7500 Wireless Speaker board: + * 8007-1210 Rev 1.0 + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + */ +#include <linux/device.h> +#include <linux/gpio.h> +#include <asm/board.h> + +#include <linux/platform_device.h> +#include <asm/audio.h> +#include <linux/i2c.h> +#include <linux/i2c-gpio.h> + +static struct i2c_board_info __initdata ip7500wspkr_i2c_board_info[] = { + /* + * U6, CS4350 DAC, address 0x4B + */ + { + .type = "cs4350", + .addr = 0x4B, + }, +}; + +/* + * I2C bus on the board, SDA PE4, SCL PE5 + */ +static struct i2c_gpio_platform_data ip7500wspkr_i2c_data = { + .sda_pin = GPIO_RD_5, + .scl_pin = GPIO_RD_6, + .sda_is_open_drain = 0, + .scl_is_open_drain = 0, + .udelay = 50, +}; + +static struct platform_device ip7500wspkr_i2c_device = { + .name = "i2c-gpio", + .id = 0, + .dev = { + .platform_data = &ip7500wspkr_i2c_data, + }, +}; + +static struct platform_device *ip7500wspkr_devices[] __initdata = { + &ip7500wspkr_i2c_device, +}; + +/* + * ip7500wspkr_init + * Called to add the devices which we have on this board + */ +static int __init ip7500wspkr_init(void) +{ + struct platform_device *audio_dev; + struct platform_device *audio_dev2; + + board_init(); + + ubi_gpio_init(); + + platform_add_devices(ip7500wspkr_devices, ARRAY_SIZE(ip7500wspkr_devices)); + + audio_dev = audio_device_alloc("snd-ubi32-cs4350", "audio", "audio-i2sout", 0); + if (audio_dev) { + ip7500wspkr_i2c_board_info[0].platform_data = audio_dev; + } + + audio_dev2 = audio_device_alloc("snd-ubi32-generic", "audio", "audio-spdifout", 0); + if (audio_dev2) { + platform_device_register(audio_dev2); + } + + printk(KERN_INFO "%s: registering i2c resources\n", __FUNCTION__); + i2c_register_board_info(0, ip7500wspkr_i2c_board_info, ARRAY_SIZE(ip7500wspkr_i2c_board_info)); + + printk(KERN_INFO "IP7500 Wireless Speaker Board\n"); + + return 0; +} + +arch_initcall(ip7500wspkr_init); diff --git a/target/linux/ubicom32/files/arch/ubicom32/mm/Makefile b/target/linux/ubicom32/files/arch/ubicom32/mm/Makefile new file mode 100644 index 0000000000..222128d2bd --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/mm/Makefile @@ -0,0 +1,32 @@ +# +# arch/ubicom32/mm/Makefile +# <TODO: Replace with short file description> +# +# (C) Copyright 2009, Ubicom, Inc. +# +# This file is part of the Ubicom32 Linux Kernel Port. +# +# The Ubicom32 Linux Kernel Port is free software: you can redistribute +# it and/or modify it under the terms of the GNU General Public License +# as published by the Free Software Foundation, either version 2 of the +# License, or (at your option) any later version. +# +# The Ubicom32 Linux Kernel Port is distributed in the hope that it +# will be useful, but WITHOUT ANY WARRANTY; without even the implied +# warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See +# the GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with the Ubicom32 Linux Kernel Port. If not, +# see <http://www.gnu.org/licenses/>. +# +# Ubicom32 implementation derived from (with many thanks): +# arch/m68knommu +# arch/blackfin +# arch/parisc +# +# +# Makefile for the linux m68knommu specific parts of the memory manager. +# + +obj-y += init.o fault.o memory.o kmap.o ocm-alloc.o diff --git a/target/linux/ubicom32/files/arch/ubicom32/mm/fault.c b/target/linux/ubicom32/files/arch/ubicom32/mm/fault.c new file mode 100644 index 0000000000..ce6b1c760c --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/mm/fault.c @@ -0,0 +1,80 @@ +/* + * arch/ubicom32/mm/fault.c + * Ubicom32 architecture page fault implementation. + * + * (C) Copyright 2009, Ubicom, Inc. + * Copyright (C) 1998 D. Jeff Dionne <jeff@lineo.ca>, + * Copyright (C) 2000 Lineo, Inc. (www.lineo.com) + * + * Based on: + * + * linux/arch/m68k/mm/fault.c + * + * Copyright (C) 1995 Hamish Macdonald + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ + +#include <linux/module.h> +#include <linux/mman.h> +#include <linux/mm.h> +#include <linux/kernel.h> +#include <linux/ptrace.h> + +#include <asm/system.h> +#include <asm/pgtable.h> + +extern void die_if_kernel(char *, struct pt_regs *, long); + +/* + * This routine handles page faults. It determines the problem, and + * then passes it off to one of the appropriate routines. + * + * error_code: + * bit 0 == 0 means no page found, 1 means protection fault + * bit 1 == 0 means read, 1 means write + * + * If this routine detects a bad access, it returns 1, otherwise it + * returns 0. + */ +asmlinkage int do_page_fault(struct pt_regs *regs, unsigned long address, + unsigned long error_code) +{ +#ifdef DEBUG + printk (KERN_DEBUG "regs->sr=%#x, regs->pc=%#lx, address=%#lx, %ld\n", + regs->sr, regs->pc, address, error_code); +#endif + + /* + * Oops. The kernel tried to access some bad page. We'll have to + * terminate things with extreme prejudice. + */ + if ((unsigned long) address < PAGE_SIZE) { + printk(KERN_ALERT "Unable to handle kernel NULL pointer dereference"); + } else + printk(KERN_ALERT "Unable to handle kernel access"); + printk(KERN_ALERT " at virtual address %08lx\n",address); + die_if_kernel("Oops", regs, error_code); + do_exit(SIGKILL); + + return 1; +} diff --git a/target/linux/ubicom32/files/arch/ubicom32/mm/init.c b/target/linux/ubicom32/files/arch/ubicom32/mm/init.c new file mode 100644 index 0000000000..c486835415 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/mm/init.c @@ -0,0 +1,262 @@ +/* + * arch/ubicom32/mm/init.c + * Ubicom32 architecture virtual memory initialization. + * + * (C) Copyright 2009, Ubicom, Inc. + * Copyright (C) 1998 D. Jeff Dionne <jeff@lineo.ca>, + * Kenneth Albanowski <kjahds@kjahds.com>, + * Copyright (C) 2000 Lineo, Inc. (www.lineo.com) + * + * Based on: + * + * linux/arch/m68k/mm/init.c + * + * Copyright (C) 1995 Hamish Macdonald + * + * JAN/1999 -- hacked to support ColdFire (gerg@snapgear.com) + * DEC/2000 -- linux 2.4 support <davidm@snapgear.com> + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ + +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/string.h> +#include <linux/types.h> +#include <linux/ptrace.h> +#include <linux/mman.h> +#include <linux/mm.h> +#include <linux/swap.h> +#include <linux/init.h> +#include <linux/highmem.h> +#include <linux/pagemap.h> +#include <linux/bootmem.h> +#include <linux/slab.h> + +#include <asm/setup.h> +#include <asm/segment.h> +#include <asm/page.h> +#include <asm/pgtable.h> +#include <asm/system.h> +#include <asm/machdep.h> +#include <asm/ocm-alloc.h> +#include <asm/processor.h> + +#undef DEBUG + +extern void die_if_kernel(char *,struct pt_regs *,long); +extern void free_initmem(void); + +/* + * BAD_PAGE is the page that is used for page faults when linux + * is out-of-memory. Older versions of linux just did a + * do_exit(), but using this instead means there is less risk + * for a process dying in kernel mode, possibly leaving a inode + * unused etc.. + * + * BAD_PAGETABLE is the accompanying page-table: it is initialized + * to point to BAD_PAGE entries. + * + * ZERO_PAGE is a special page that is used for zero-initialized + * data and COW. + */ +static unsigned long empty_bad_page_table; + +static unsigned long empty_bad_page; + +unsigned long empty_zero_page; + +void show_mem(void) +{ + unsigned long i; + int free = 0, total = 0, reserved = 0, shared = 0; + int cached = 0; + + printk(KERN_INFO "\nMem-info:\n"); + show_free_areas(); + i = max_mapnr; + while (i-- > 0) { + total++; + if (PageReserved(mem_map+i)) + reserved++; + else if (PageSwapCache(mem_map+i)) + cached++; + else if (!page_count(mem_map+i)) + free++; + else + shared += page_count(mem_map+i) - 1; + } + printk(KERN_INFO "%d pages of RAM\n",total); + printk(KERN_INFO "%d free pages\n",free); + printk(KERN_INFO "%d reserved pages\n",reserved); + printk(KERN_INFO "%d pages shared\n",shared); + printk(KERN_INFO "%d pages swap cached\n",cached); +} + +extern unsigned long memory_start; +extern unsigned long memory_end; +extern char __ocm_free_begin; +extern char __ocm_free_end; + +/* + * paging_init() continues the virtual memory environment setup which + * was begun by the code in arch/head.S. + * The parameters are pointers to where to stick the starting and ending + * addresses of available kernel virtual memory. + */ +void __init paging_init(void) +{ + /* + * Make sure start_mem is page aligned, otherwise bootmem and + * page_alloc get different views of the world. + */ +#ifdef DEBUG + unsigned long start_mem = PAGE_ALIGN(memory_start); +#endif + unsigned long end_mem = memory_end & PAGE_MASK; + +#ifdef DEBUG + printk (KERN_DEBUG "start_mem is %#lx\nvirtual_end is %#lx\n", + start_mem, end_mem); +#endif + + /* + * Initialize the bad page table and bad page to point + * to a couple of allocated pages. + */ + empty_bad_page_table = (unsigned long)alloc_bootmem_pages(PAGE_SIZE); + empty_bad_page = (unsigned long)alloc_bootmem_pages(PAGE_SIZE); + empty_zero_page = (unsigned long)alloc_bootmem_pages(PAGE_SIZE); + memset((void *)empty_zero_page, 0, PAGE_SIZE); + + /* + * TODO: enable setting up for user memory management interface. + */ + +#ifdef DEBUG + printk (KERN_DEBUG "before free_area_init\n"); + + printk (KERN_DEBUG "free_area_init -> start_mem is %#lx\nvirtual_end is %#lx\n", + start_mem, end_mem); +#endif + + { + unsigned long zones_size[MAX_NR_ZONES] = {0, }; +#ifdef CONFIG_ZONE_DMA + zones_size[ZONE_DMA] = OCMSIZE >> PAGE_SHIFT; +#endif + zones_size[ZONE_NORMAL] = (end_mem - PAGE_OFFSET) >> PAGE_SHIFT; +#ifdef CONFIG_HIGHMEM + zones_size[ZONE_HIGHMEM] = 0; +#endif + free_area_init(zones_size); + } +} + +void __init mem_init(void) +{ + int codek = 0, datak = 0, initk = 0; + unsigned long tmp, ram_start, ram_end, len; + extern char _etext, _stext, _sdata, _ebss, __init_begin, __init_end; + + unsigned long start_mem = memory_start; /* DAVIDM - these must start at end of kernel */ + unsigned long end_mem = memory_end; /* DAVIDM - this must not include kernel stack at top */ + processor_dram(&ram_start, &ram_end); + len = (ram_end - ram_start) + OCMSIZE; +#ifdef DEBUG + printk(KERN_DEBUG "Mem_init: start=%lx, end=%lx\n", start_mem, end_mem); +#endif + + end_mem &= PAGE_MASK; + high_memory = (void *) end_mem; + + start_mem = PAGE_ALIGN(start_mem); + max_mapnr = num_physpages = (((unsigned long) high_memory) - PAGE_OFFSET) >> PAGE_SHIFT; + + /* this will put all memory onto the freelists */ +#ifdef CONFIG_ZONE_DMA + { + unsigned long ocm_free_begin = (unsigned long)&__ocm_free_begin; + unsigned long ocm_free_end = (unsigned long)&__ocm_free_end; + unsigned long zone_dma_begin = (ocm_free_begin + PAGE_SIZE - 1) & PAGE_MASK; + unsigned long zone_dma_end = ocm_free_end & PAGE_MASK; + if (zone_dma_end > zone_dma_begin) + free_bootmem(zone_dma_begin, zone_dma_end-zone_dma_begin); + } +#endif + totalram_pages = free_all_bootmem(); + + codek = (&_etext - &_stext) >> 10; + datak = (&_ebss - &_sdata) >> 10; + initk = (&__init_begin - &__init_end) >> 10; + + tmp = nr_free_pages() << PAGE_SHIFT; + printk(KERN_INFO "Memory available: %luk/%luk RAM, (%dk kernel code, %dk data)\n", + tmp >> 10, + len >> 10, + codek, + datak + ); + +} + +#ifdef CONFIG_BLK_DEV_INITRD +void free_initrd_mem(unsigned long start, unsigned long end) +{ + int pages = 0; + for (; start < end; start += PAGE_SIZE) { + ClearPageReserved(virt_to_page(start)); + init_page_count(virt_to_page(start)); + free_page(start); + totalram_pages++; + pages++; + } + printk (KERN_NOTICE "Freeing initrd memory: %dk freed\n", pages); +} +#endif + +void +free_initmem() +{ +#ifdef CONFIG_RAMKERNEL + unsigned long addr; + extern char __init_begin, __init_end; + /* + * The following code should be cool even if these sections + * are not page aligned. + */ + addr = PAGE_ALIGN((unsigned long)(&__init_begin)); + /* next to check that the page we free is not a partial page */ + for (; addr + PAGE_SIZE < (unsigned long)(&__init_end); addr +=PAGE_SIZE) { + ClearPageReserved(virt_to_page(addr)); + init_page_count(virt_to_page(addr)); + free_page(addr); + totalram_pages++; + } + printk(KERN_NOTICE "Freeing unused kernel memory: %ldk freed (0x%x - 0x%x)\n", + (addr - PAGE_ALIGN((long) &__init_begin)) >> 10, + (int)(PAGE_ALIGN((unsigned long)(&__init_begin))), + (int)(addr - PAGE_SIZE)); +#endif +} diff --git a/target/linux/ubicom32/files/arch/ubicom32/mm/kmap.c b/target/linux/ubicom32/files/arch/ubicom32/mm/kmap.c new file mode 100644 index 0000000000..48b489ff1a --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/mm/kmap.c @@ -0,0 +1,79 @@ +/* + * arch/ubicom32/mm/kmap.c + * Ubicom32 architecture non-mmu ioremap and friends implementation. + * + * (C) Copyright 2009, Ubicom, Inc. + * Copyright (C) 2000 Lineo, <davidm@snapgear.com> + * Copyright (C) 2000-2002 David McCullough <davidm@snapgear.com> + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ + +#include <linux/module.h> +#include <linux/mm.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/types.h> +#include <linux/slab.h> +#include <linux/vmalloc.h> + +#include <asm/setup.h> +#include <asm/segment.h> +#include <asm/page.h> +#include <asm/pgalloc.h> +#include <asm/io.h> +#include <asm/system.h> + +#undef DEBUG + +/* + * Map some physical address range into the kernel address space. + */ +void *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag) +{ + return (void *)physaddr; +} + +/* + * Unmap a ioremap()ed region again. + */ +void iounmap(void *addr) +{ +} + +/* + * __iounmap unmaps nearly everything, so be careful + * it doesn't free currently pointer/page tables anymore but it + * wans't used anyway and might be added later. + */ +void __iounmap(void *addr, unsigned long size) +{ +} + +/* + * Set new cache mode for some kernel address space. + * The caller must push data for that range itself, if such data may already + * be in the cache. + */ +void kernel_set_cachemode(void *addr, unsigned long size, int cmode) +{ +} diff --git a/target/linux/ubicom32/files/arch/ubicom32/mm/memory.c b/target/linux/ubicom32/files/arch/ubicom32/mm/memory.c new file mode 100644 index 0000000000..17075ff534 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/mm/memory.c @@ -0,0 +1,58 @@ +/* + * arch/ubicom32/mm/memory.c + * Ubicom32 architecture kernel_map() implementation. + * + * (C) Copyright 2009, Ubicom, Inc. + * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>, + * Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com) + * + * Based on: + * + * linux/arch/m68k/mm/memory.c + * + * Copyright (C) 1995 Hamish Macdonald + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ + +#include <linux/module.h> +#include <linux/mm.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/types.h> +#include <linux/slab.h> + +#include <asm/segment.h> +#include <asm/page.h> +#include <asm/pgtable.h> +#include <asm/system.h> + +/* + * Map some physical address range into the kernel address space. + * The code is copied and adapted from map_chunk(). + */ + +unsigned long kernel_map(unsigned long paddr, unsigned long size, + int nocacheflag, unsigned long *memavailp ) +{ + return paddr; +} diff --git a/target/linux/ubicom32/files/arch/ubicom32/mm/ocm-alloc.c b/target/linux/ubicom32/files/arch/ubicom32/mm/ocm-alloc.c new file mode 100644 index 0000000000..5a10c2938b --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/mm/ocm-alloc.c @@ -0,0 +1,487 @@ +/* + * arch/ubicom32/mm/ocm-alloc.c + * OCM allocator for Uibcom32 On-Chip memory + * + * (C) Copyright 2009, Ubicom, Inc. + * Copyright 2004-2008 Analog Devices Inc. + * + * Based on: + * + * arch/blackfin/mm/sram-alloc.c + * + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it + * will be useful, but WITHOUT ANY WARRANTY; without even the implied + * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, + * see <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/miscdevice.h> +#include <linux/ioport.h> +#include <linux/fcntl.h> +#include <linux/init.h> +#include <linux/poll.h> +#include <linux/proc_fs.h> +#include <linux/mutex.h> +#include <linux/rtc.h> +#include <asm/ocm-alloc.h> + +#if 0 +#define DEBUGP printk +#else +#define DEBUGP(fmt, a...) +#endif +/* + * the data structure for OCM heap pieces + */ +struct ocm_piece { + void *paddr; + int size; + pid_t pid; + struct ocm_piece *next; +}; + +/* + * struct ocm_heap + */ +struct ocm_heap { + struct ocm_piece free_head; + struct ocm_piece used_head; + struct mutex lock; +}; + +static struct ocm_heap ocm_inst_heap; +int ubi32_ocm_skbuf_max = 21, ubi32_ocm_skbuf, ubi32_ddr_skbuf; + +/* + * OCM area for storing code + */ +extern asmlinkage void *__ocm_free_begin; +extern asmlinkage void *__ocm_free_end; +extern asmlinkage void *__ocm_inst_heap_begin; +extern asmlinkage void *__ocm_inst_heap_end; +#define OCM_INST_HEAP_BEGIN ((unsigned int)&__ocm_inst_heap_begin) +#define OCM_INST_HEAP_END ((unsigned int)&__ocm_inst_heap_end) +#define OCM_INST_HEAP_LENGTH (OCM_INST_HEAP_END - OCM_INST_HEAP_BEGIN) + +static struct kmem_cache *ocm_piece_cache; + +/* + * _ocm_heap_init() + */ +static int __init _ocm_heap_init(struct ocm_heap *ocmh, + unsigned int start, + unsigned int size) +{ + ocmh->free_head.next = kmem_cache_alloc(ocm_piece_cache, GFP_KERNEL); + + if (!ocmh->free_head.next) + return -1; + + ocmh->free_head.next->paddr = (void *)start; + ocmh->free_head.next->size = size; + ocmh->free_head.next->pid = 0; + ocmh->free_head.next->next = 0; + + ocmh->used_head.next = NULL; + + /* mutex initialize */ + mutex_init(&ocmh->lock); + + return 0; +} + +/* + * _ocm_alloc_init() + * + * starts the ocm heap(s) + */ +static int __init _ocm_alloc_init(void) +{ + if (OCM_INST_HEAP_LENGTH) { + ocm_piece_cache = kmem_cache_create("ocm_piece_cache", + sizeof(struct ocm_piece), + 0, SLAB_PANIC, NULL); + + if (_ocm_heap_init(&ocm_inst_heap, + OCM_INST_HEAP_BEGIN, + OCM_INST_HEAP_LENGTH) == 0) + printk(KERN_INFO "OCM Instruction Heap %d KB\n", + OCM_INST_HEAP_LENGTH >> 10); + else + printk(KERN_INFO "Failed to initialize OCM " + "Instruction Heap\n"); + + } else + printk(KERN_INFO "No space available for OCM " + "Instruction Heap\n"); + + return 0; +} +pure_initcall(_ocm_alloc_init); + +/* + * _ocm_alloc() + * generic alloc a block in the ocm heap, if successful + * returns the pointer. + */ +static void *_ocm_alloc(size_t size, pid_t pid, struct ocm_heap *ocmheap) +{ + struct ocm_piece *pslot, *plast, *pavail; + struct ocm_piece *pfree_head = &ocmheap->free_head; + struct ocm_piece *pused_head = &ocmheap->used_head; + + if (size <= 0 || !pfree_head || !pused_head) + return NULL; + + /* Align the size */ + size = (size + 3) & ~3; + + pslot = pfree_head->next; + plast = pfree_head; + + /* + * search an available piece slot + */ + while (pslot != NULL && size > pslot->size) { + plast = pslot; + pslot = pslot->next; + } + + if (!pslot) + return NULL; + + if (pslot->size == size) { + /* + * Unlink this block from the list + */ + plast->next = pslot->next; + pavail = pslot; + } else { + /* + * Split this block in two. + */ + pavail = kmem_cache_alloc(ocm_piece_cache, GFP_KERNEL); + + if (!pavail) + return NULL; + + pavail->paddr = pslot->paddr; + pavail->size = size; + pslot->paddr += size; + pslot->size -= size; + } + + pavail->pid = pid; + + pslot = pused_head->next; + plast = pused_head; + + /* + * insert new piece into used piece list !!! + */ + while (pslot != NULL && pavail->paddr < pslot->paddr) { + plast = pslot; + pslot = pslot->next; + } + + pavail->next = pslot; + plast->next = pavail; + + DEBUGP("_ocm_alloc %d bytes at %p from in %p", + size, pavail->paddr, ocmheap); + + return pavail->paddr; +} + +#if 0 +/* Allocate the largest available block. */ +static void *_ocm_alloc_max(struct ocm_heap *ocmheap, + unsigned long *psize) +{ + struct ocm_piece *pfree_head = &ocmheap->free_head; + struct ocm_piece *pslot, *pmax; + + pmax = pslot = pfree_head->next; + + /* search an available piece slot */ + while (pslot != NULL) { + if (pslot->size > pmax->size) + pmax = pslot; + pslot = pslot->next; + } + + if (!pmax) + return NULL; + + *psize = pmax->size; + + return _ocm_alloc(*psize, ocmheap); +} +#endif + +/* + * _ocm_free() + * generic free a block in the ocm heap, if successful + */ +static int _ocm_free(const void *addr, + struct ocm_heap *ocmheap) +{ + struct ocm_piece *pslot, *plast, *pavail; + struct ocm_piece *pfree_head = &ocmheap->free_head; + struct ocm_piece *pused_head = &ocmheap->used_head; + + /* search the relevant memory slot */ + pslot = pused_head->next; + plast = pused_head; + + /* search an available piece slot */ + while (pslot != NULL && pslot->paddr != addr) { + plast = pslot; + pslot = pslot->next; + } + + if (!pslot) { + DEBUGP("_ocm_free %p not found in %p", addr, ocmheap); + return -1; + } + DEBUGP("_ocm_free %p from in %p", addr, ocmheap); + + plast->next = pslot->next; + pavail = pslot; + pavail->pid = 0; + + /* insert free pieces back to the free list */ + pslot = pfree_head->next; + plast = pfree_head; + + while (pslot != NULL && addr > pslot->paddr) { + plast = pslot; + pslot = pslot->next; + } + + if (plast != pfree_head && + plast->paddr + plast->size == pavail->paddr) { + plast->size += pavail->size; + kmem_cache_free(ocm_piece_cache, pavail); + } else { + pavail->next = plast->next; + plast->next = pavail; + plast = pavail; + } + + if (pslot && plast->paddr + plast->size == pslot->paddr) { + plast->size += pslot->size; + plast->next = pslot->next; + kmem_cache_free(ocm_piece_cache, pslot); + } + + return 0; +} + +/* + * ocm_inst_alloc() + * + * allocates a block of size in the ocm instrction heap, if + * successful returns address allocated. + */ +void *ocm_inst_alloc(size_t size, pid_t pid) +{ + void *addr; + + if (!OCM_INST_HEAP_LENGTH) + return NULL; + + + mutex_lock(&ocm_inst_heap.lock); + + addr = _ocm_alloc(size, pid, &ocm_inst_heap); + + mutex_unlock(&ocm_inst_heap.lock); + + return addr; +} +EXPORT_SYMBOL(ocm_inst_alloc); + +/* + * ocm_inst_free() + * free a block in the ocm instrction heap, returns 0 if successful. + */ +int ocm_inst_free(const void *addr) +{ + int ret; + + if (!OCM_INST_HEAP_LENGTH) + return -1; + + mutex_lock(&ocm_inst_heap.lock); + + ret = _ocm_free(addr, &ocm_inst_heap); + + mutex_unlock(&ocm_inst_heap.lock); + + return ret; +} +EXPORT_SYMBOL(ocm_inst_free); + +/* + * ocm_free() + * free a block in one of the ocm heaps, returns 0 if successful. + */ +int ocm_free(const void *addr) +{ + if (addr >= (void *)OCM_INST_HEAP_BEGIN + && addr < (void *)(OCM_INST_HEAP_END)) + return ocm_inst_free(addr); + else + return -1; +} +EXPORT_SYMBOL(ocm_free); + + +#ifdef CONFIG_PROC_FS +/* Need to keep line of output the same. Currently, that is 46 bytes + * (including newline). + */ +static int _ocm_proc_read(char *buf, int *len, int count, const char *desc, + struct ocm_heap *ocmheap) +{ + struct ocm_piece *pslot; + struct ocm_piece *pfree_head = &ocmheap->free_head; + struct ocm_piece *pused_head = &ocmheap->used_head; + + /* The format is the following + * --- OCM 123456789012345 Size PID State \n + * 12345678-12345678 1234567890 12345 1234567890\n + */ + int l; + l = sprintf(&buf[*len], "--- OCM %-15s Size PID State \n", + desc); + + *len += l; + count -= l; + + mutex_lock(&ocm_inst_heap.lock); + + /* + * search the relevant memory slot + */ + pslot = pused_head->next; + + while (pslot != NULL && count > 46) { + l = sprintf(&buf[*len], "%p-%p %10i %5i %-10s\n", + pslot->paddr, pslot->paddr + pslot->size, + pslot->size, pslot->pid, "ALLOCATED"); + + *len += l; + count -= l; + pslot = pslot->next; + } + + pslot = pfree_head->next; + + while (pslot != NULL && count > 46) { + l = sprintf(&buf[*len], "%p-%p %10i %5i %-10s\n", + pslot->paddr, pslot->paddr + pslot->size, + pslot->size, pslot->pid, "FREE"); + + *len += l; + count -= l; + pslot = pslot->next; + } + + mutex_unlock(&ocm_inst_heap.lock); + + return 0; +} + +static int ocm_proc_read(char *buf, char **start, off_t offset, int count, + int *eof, void *data) +{ + int len = 0; + + len = sprintf(&buf[len], "--- OCM SKB usage (max RX buf %d)\n" + "(SKB in OCM) %d - (SKB in DDR) %d\n", + ubi32_ocm_skbuf_max, + ubi32_ocm_skbuf, + ubi32_ddr_skbuf); + + len += sprintf(&buf[len], "--- OCM Data Heap Size\n" + "%p-%p %10i\n", + ((void *)&__ocm_free_begin), + ((void *)&__ocm_free_end), + ((unsigned int)&__ocm_free_end) - + ((unsigned int)&__ocm_free_begin)); + + if (_ocm_proc_read(buf, &len, count - len, "Inst Heap", + &ocm_inst_heap)) + goto not_done; + *eof = 1; + not_done: + return len; +} + +static int ocm_proc_write(struct file *file, const char __user *buffer, + unsigned long count, void *data) +{ + int n, v; + char in[8]; + + if (count > sizeof(in)) + return -EINVAL; + + if (copy_from_user(in, buffer, count)) + return -EFAULT; + in[count-1] = 0; + + printk(KERN_INFO "OCM skb alloc max = %s\n", in); + + n = 0; + v = 0; + while ((in[n] >= '0') && (in[n] <= '9')) { + v = v * 10 + (int)(in[n] - '0'); + n++; + } + + if (v == 0) + return -EINVAL; + + ubi32_ocm_skbuf_max = v; + ubi32_ocm_skbuf = ubi32_ddr_skbuf = 0; + + return count; +} + +static int __init sram_proc_init(void) +{ + struct proc_dir_entry *ptr; + ptr = create_proc_entry("ocm", S_IFREG | S_IRUGO, NULL); + if (!ptr) { + printk(KERN_WARNING "unable to create /proc/ocm\n"); + return -1; + } + ptr->read_proc = ocm_proc_read; + ptr->write_proc = ocm_proc_write; + return 0; +} +late_initcall(sram_proc_init); +#endif diff --git a/target/linux/ubicom32/files/arch/ubicom32/oprofile/Makefile b/target/linux/ubicom32/files/arch/ubicom32/oprofile/Makefile new file mode 100644 index 0000000000..969d2f7023 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/oprofile/Makefile @@ -0,0 +1,37 @@ +# +# arch/ubicom32/Makefile +# Makefile for Oprofile support on Ubicom32 +# +# (C) Copyright 2009, Ubicom, Inc. +# +# This file is part of the Ubicom32 Linux Kernel Port. +# +# The Ubicom32 Linux Kernel Port is free software: you can redistribute +# it and/or modify it under the terms of the GNU General Public License +# as published by the Free Software Foundation, either version 2 of the +# License, or (at your option) any later version. +# +# The Ubicom32 Linux Kernel Port is distributed in the hope that it +# will be useful, but WITHOUT ANY WARRANTY; without even the implied +# warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See +# the GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with the Ubicom32 Linux Kernel Port. If not, +# see <http://www.gnu.org/licenses/>. +# +# Ubicom32 implementation derived from (with many thanks): +# arch/m68knommu +# arch/blackfin +# arch/parisc +# + +obj-$(CONFIG_OPROFILE) += oprofile.o + +DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \ + oprof.o cpu_buffer.o buffer_sync.o \ + event_buffer.o oprofile_files.o \ + oprofilefs.o oprofile_stats.o \ + timer_int.o ) + +oprofile-y := $(DRIVER_OBJS) profile.o diff --git a/target/linux/ubicom32/files/arch/ubicom32/oprofile/ipProf.h b/target/linux/ubicom32/files/arch/ubicom32/oprofile/ipProf.h new file mode 100644 index 0000000000..2a785f08d6 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/oprofile/ipProf.h @@ -0,0 +1,39 @@ +#ifndef __IP_PROF_H__ +#define __IP_PROF_H__ + +/* This number MUST match what is used in the ultra configuration! */ +#define IPPROFILETIO_MAX_SAMPLES 600 + +/* Move to .h file used in both; avoid special types */ +struct profile_sample { + unsigned int pc; /* PC value */ + unsigned int parent; /* a5 contents, to find the caller */ + unsigned char cond_codes; /* for branch prediction */ + unsigned char thread; /* I-blocked, D-blocked, + 4-bit thread number */ + unsigned short active; /* which threads are active - + for accurate counting */ + unsigned short blocked; /* which threads are blocked due to + I or D cache misses */ + unsigned int latency; /* CPU clocks since the last message + dispatch in this thread + (thread 0 only for now) */ +}; + + +struct profilenode { + struct devtree_node dn; + volatile unsigned char enabled; /* Is the tio enabled to + take samples? */ + volatile unsigned char busy; /* set when the samples + are being read */ + volatile unsigned int mask; /* Threads that change the MT_EN flag */ + volatile unsigned short rate; /* What is the sampling rate? */ + volatile unsigned short head; /* sample taker puts samples here */ + volatile unsigned short tail; /* packet filler takes samples here */ + volatile unsigned short count; /* number of valid samples */ + volatile unsigned short total; /* Total samples */ + struct profile_sample samples[IPPROFILETIO_MAX_SAMPLES]; +}; + +#endif diff --git a/target/linux/ubicom32/files/arch/ubicom32/oprofile/profile.c b/target/linux/ubicom32/files/arch/ubicom32/oprofile/profile.c new file mode 100644 index 0000000000..aeac3c6667 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/oprofile/profile.c @@ -0,0 +1,221 @@ +/* + * arch/ubicom32/oprofile/profile.c + * Oprofile support for arch Ubicom32 + * + * (C) Copyright 2009, Ubicom, Inc. + * + * This file is part of the Ubicom32 Linux Kernel Port. + * + * The Ubicom32 Linux Kernel Port is free software: you can redistribute + * it and/or modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, either version 2 of the + * License, or (at your option) + * any later version. + * + * The Ubicom32 Linux Kernel Port is distributed in the hope that it will + * be useful, but WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Ubicom32 Linux Kernel Port. If not, see + * <http://www.gnu.org/licenses/>. + * + * Ubicom32 implementation derived from (with many thanks): + * arch/m68knommu + * arch/blackfin + * arch/parisc + */ + +/** + * @file profile.c + * + * @remark Copyright 2002 OProfile authors + * @remark Read the file COPYING + * + * @author Hunyue Yau <hy@hy-research.com> + */ + +#include <linux/oprofile.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/kernel.h> + +#include <asm/devtree.h> +#include <asm/thread.h> + +/* For identifying userland vs kernel address */ +#include <asm/stacktrace.h> +#include "ipProf.h" + +/* For communications with the backend */ +static struct profilenode *profile_node; + +/* Bitmask containing all Linux threads - as seen by the ROSR reg */ +static unsigned long th_all_mask; + +/* Lookup table to translate a hardware thread into a CPU identifier + * Table is indexed by the ROSR value which is assumed to be + * relatively small (0...15). + */ +unsigned int cpu_map[THREAD_ARCHITECTURAL_MAX]; + +static struct pt_regs regs; + +/* + * For each sample returned, checked to see if they are relevant to + * us. This is necessary as the ubicom32 architecture has other software + * running outside of Linux. Only then, put the sample into the relevant + * cpu bins. + * + * To minimize overhead, a global mask with all possible threads of in + * interest to us is used as a first check. Then a second mask identifying + * the thread is used to obtain an identifier for that "CPU". + */ + +/* + * ubicom32_build_cpu_th_mask() + * + * Build a lookup table for translation between hardware thread + * "ROSR" values and Linux CPU ids + * + * *** This gets executed on all CPUs at once! *** + */ +static void ubicom32_build_cpu_th_mask(void *mask) +{ + thread_t self = thread_get_self(); + unsigned long *th_m = mask; + + BUG_ON(self <= 0 || self >= THREAD_ARCHITECTURAL_MAX); + cpu_map[self] = smp_processor_id(); + + set_bit(self, th_m); +} + +/* + * profile_interrupt() + * + * Process samples returned from the profiler backend. The backend + * may return samples that are irrelevant to us or may even return + * multiple samples for the same CPU. Note that the sames may be + * for ANY cpu. At this time, this is unique and to support this requires + * Oprofile to expose an interface to accept the CPU that the same came + * frome. + */ +static irqreturn_t profile_interrupt(int irq, void *arg) +{ + int i, buf_entry; + int is_kernel; + unsigned int bit_th; + unsigned int th; + + if (!(profile_node->enabled) || profile_node->count < 0) { + printk(KERN_WARNING + "Unexpected interrupt, no samples or not enabled!\n"); + return IRQ_HANDLED; + } + + profile_node->busy = 1; /* Keep backend out */ + + for (i = 0; i < profile_node->count; i++) { + buf_entry = profile_node->tail; + profile_node->tail++; + profile_node->tail %= IPPROFILETIO_MAX_SAMPLES; + + /* Note - the "thread" ID is only the lower 4 bits */ + th = (0x0f & profile_node->samples[buf_entry].thread); + bit_th = (1 << th); + + if ((bit_th & th_all_mask) == 0) + continue; + + regs.pc = profile_node->samples[buf_entry].pc; + + is_kernel = ubicom32_is_kernel(regs.pc); + + oprofile_add_ext_sample_cpu(regs.pc, ®s, 0, is_kernel, + cpu_map[th]); + } + profile_node->count = 0; + profile_node->busy = 0; + + return IRQ_HANDLED; +} + +/* + * profile_start() + * + * Notification from oprofile to start the profiler + */ +static int profile_start(void) +{ + if (!profile_node) + return -1; + + profile_node->enabled = 1; + + return 0; +} + +/* + * profile_stop() + * + * Notification from oprofile to stop the profiler + */ +static void profile_stop(void) +{ + if (profile_node) + profile_node->enabled = 0; +} + +/* + * oprofile_arch_init() + * + * Attach to Oprofile after qualify the availability of the backend + * profiler support. + */ +int __init oprofile_arch_init(struct oprofile_operations *ops) +{ + int r = -ENODEV; + + profile_node = (struct profilenode *)devtree_find_node("profiler"); + + if (profile_node == NULL) { + printk(KERN_WARNING "Cannot find profiler node\n"); + return r; + } + + r = request_irq(profile_node->dn.recvirq, profile_interrupt, + IRQF_DISABLED, "profiler", NULL); + + if (r < 0) { + profile_node = NULL; + printk(KERN_WARNING "Cannot get profiler IRQ\n"); + return r; + } + + ops->start = profile_start; + ops->stop = profile_stop; + ops->cpu_type = "timer"; + + memset(cpu_map, 0, sizeof(cpu_map)); + + on_each_cpu(ubicom32_build_cpu_th_mask, &th_all_mask, 1); + + memset(®s, 0, sizeof(regs)); + + return r; +} + +/* + * oprofile_arch_exit() + * + * External call to take outselves out. + * Make sure backend is not running. + */ +void oprofile_arch_exit(void) +{ + BUG_ON(profile_node->enabled); +} |