aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/xburst
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/xburst')
-rw-r--r--target/linux/xburst/config-3.10331
-rw-r--r--target/linux/xburst/patches-3.10/001-ubi-Read-only-the-vid-header-instead-of-the-whole-pa.patch27
-rw-r--r--target/linux/xburst/patches-3.10/002-NAND-Optimize-NAND_ECC_HW_OOB_FIRST-read.patch50
-rw-r--r--target/linux/xburst/patches-3.10/003-NAND-Add-support-for-subpage-reads-for-NAND_ECC_HW_O.patch141
-rw-r--r--target/linux/xburst/patches-3.10/004-MMC-JZ4740-Remove-duplicated-code.patch29
-rw-r--r--target/linux/xburst/patches-3.10/005-MMC-JZ4740-Fix-handling-of-read-errors.patch35
-rw-r--r--target/linux/xburst/patches-3.10/006-ASoC-JZ4740-delay-activation-of-the-DAC-to-work-arou.patch40
-rw-r--r--target/linux/xburst/patches-3.10/007-RTC-JZ4740-Init-the-regulator-register-on-startup.patch61
-rw-r--r--target/linux/xburst/patches-3.10/008-Add-jz4740-udc-driver.patch2330
-rw-r--r--target/linux/xburst/patches-3.10/009-Add-ili8960-lcd-driver.patch314
-rw-r--r--target/linux/xburst/patches-3.10/010-qi_lb60-Don-t-use-3-wire-spi-mode-for-the-display-fo.patch28
-rw-r--r--target/linux/xburst/patches-3.10/011-dma-Add-a-jz4740-dmaengine-driver.patch488
-rw-r--r--target/linux/xburst/patches-3.10/012-MIPS-JZ4740-Correct-clock-gate-bit-for-DMA-controlle.patch27
-rw-r--r--target/linux/xburst/patches-3.10/013-MIPS-JZ4740-Acquire-and-enable-DMA-controller-clock.patch80
-rw-r--r--target/linux/xburst/patches-3.10/014-MIPS-jz4740-Register-jz4740-DMA-device.patch73
-rw-r--r--target/linux/xburst/patches-3.10/015-MIPS-jz4740-Remove-custom-DMA-API.patch854
-rw-r--r--target/linux/xburst/patches-3.10/016-ASoC-jz4740-Use-the-generic-dmaengine-PCM-driver.patch519
17 files changed, 5427 insertions, 0 deletions
diff --git a/target/linux/xburst/config-3.10 b/target/linux/xburst/config-3.10
new file mode 100644
index 0000000000..511e6921c8
--- /dev/null
+++ b/target/linux/xburst/config-3.10
@@ -0,0 +1,331 @@
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+CONFIG_ARCH_DISCARD_MEMBLOCK=y
+CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+# CONFIG_ARPD is not set
+# CONFIG_BACKLIGHT_ADP8860 is not set
+# CONFIG_BACKLIGHT_ADP8870 is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_BACKLIGHT_PWM is not set
+CONFIG_BATTERY_JZ4740=y
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_BRIDGE is not set
+CONFIG_CHARGER_GPIO=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CONFIGFS_FS=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_CPU_GENERIC_DUMP_TLB=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_CPU_R4K_CACHE_TLB=y
+CONFIG_CPU_R4K_FPU=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_CRC16=y
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_LZO=y
+CONFIG_CRYPTO_XZ=y
+CONFIG_DMADEVICES=y
+CONFIG_DMA_ENGINE=y
+CONFIG_DMA_JZ4740=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_VIRTUAL_CHANNELS=y
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_EXT4_FS=y
+CONFIG_FAT_FS=y
+CONFIG_FB=y
+CONFIG_FB_JZ4740=y
+CONFIG_FB_SYS_COPYAREA=y
+CONFIG_FB_SYS_FILLRECT=y
+CONFIG_FB_SYS_IMAGEBLIT=y
+CONFIG_FONTS=y
+# CONFIG_FONT_10x18 is not set
+CONFIG_FONT_6x11=y
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_SUN8x16 is not set
+CONFIG_FORCE_MAX_ZONEORDER=12
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FREEZER=y
+CONFIG_FS_MBCACHE=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_DEVRES=y
+# CONFIG_HAMRADIO is not set
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_HW_CONSOLE=y
+CONFIG_HZ_PERIODIC=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_INPUT=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_INPUT_MATRIXKMAP=y
+CONFIG_INPUT_MOUSE=y
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+CONFIG_INPUT_PWM_BEEPER=y
+CONFIG_INPUT_UINPUT=y
+CONFIG_IRQ_CPU=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_WORK=y
+CONFIG_JBD2=y
+CONFIG_JZ4740_QI_LB60=y
+CONFIG_KALLSYMS=y
+CONFIG_KERNEL_GZIP=y
+CONFIG_KEXEC=y
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_MATRIX=y
+# CONFIG_LCD_AMS369FG06 is not set
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_ILI8960=y
+# CONFIG_LCD_L4F00242T03 is not set
+# CONFIG_LCD_LD9040 is not set
+# CONFIG_LCD_LMS283GF05 is not set
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_PLATFORM is not set
+# CONFIG_LCD_S6E63M0 is not set
+# CONFIG_LCD_TDO24M is not set
+# CONFIG_LCD_VGG2432A4 is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=2
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_MACH_JZ4740=y
+CONFIG_MFD_CORE=y
+CONFIG_MFD_JZ4740_ADC=y
+CONFIG_MIPS=y
+CONFIG_MIPS_FPU_EMU=y
+# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+# CONFIG_MIPS_MACHINE is not set
+CONFIG_MIPS_MT_DISABLED=y
+CONFIG_MMC=y
+CONFIG_MMC_BLOCK=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+CONFIG_MMC_JZ4740=y
+CONFIG_MMC_UNSAFE_RESUME=y
+CONFIG_MODULES_USE_ELF_REL=y
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_CYAPA is not set
+# CONFIG_MOUSE_PS2 is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ECC=y
+CONFIG_MTD_NAND_JZ4740=y
+# CONFIG_MTD_SM_COMMON is not set
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_BEB_LIMIT=20
+# CONFIG_MTD_UBI_FASTMAP is not set
+# CONFIG_MTD_UBI_GLUEBI is not set
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_PER_CPU_KM=y
+# CONFIG_NETWORK_FILESYSTEMS is not set
+# CONFIG_NET_DMA is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_NLS=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_CODEPAGE_1250=y
+CONFIG_NLS_CODEPAGE_1251=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=y
+CONFIG_NLS_CODEPAGE_775=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_CODEPAGE_852=y
+CONFIG_NLS_CODEPAGE_855=y
+CONFIG_NLS_CODEPAGE_857=y
+CONFIG_NLS_CODEPAGE_860=y
+CONFIG_NLS_CODEPAGE_861=y
+CONFIG_NLS_CODEPAGE_862=y
+CONFIG_NLS_CODEPAGE_863=y
+CONFIG_NLS_CODEPAGE_864=y
+CONFIG_NLS_CODEPAGE_865=y
+CONFIG_NLS_CODEPAGE_866=y
+CONFIG_NLS_CODEPAGE_869=y
+CONFIG_NLS_CODEPAGE_874=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_NLS_CODEPAGE_936=y
+CONFIG_NLS_CODEPAGE_949=y
+CONFIG_NLS_CODEPAGE_950=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_13=y
+CONFIG_NLS_ISO8859_14=y
+CONFIG_NLS_ISO8859_15=y
+CONFIG_NLS_ISO8859_2=y
+CONFIG_NLS_ISO8859_3=y
+CONFIG_NLS_ISO8859_4=y
+CONFIG_NLS_ISO8859_5=y
+CONFIG_NLS_ISO8859_6=y
+CONFIG_NLS_ISO8859_7=y
+CONFIG_NLS_ISO8859_8=y
+CONFIG_NLS_ISO8859_9=y
+CONFIG_NLS_KOI8_R=y
+CONFIG_NLS_KOI8_U=y
+CONFIG_NLS_UTF8=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+# CONFIG_PDA_POWER is not set
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PM=y
+CONFIG_PM_CLK=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_PREEMPT=y
+CONFIG_PREEMPT_COUNT=y
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_RCU=y
+CONFIG_PRINTK_TIME=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_PWM=y
+CONFIG_PWM_JZ4740=y
+# CONFIG_RCU_BOOST is not set
+CONFIG_RCU_CPU_STALL_VERBOSE=y
+CONFIG_RCU_STALL_COMMON=y
+CONFIG_REGMAP=y
+CONFIG_REGMAP_I2C=y
+CONFIG_REGMAP_MMIO=y
+CONFIG_REGMAP_SPI=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_DRV_CMOS is not set
+CONFIG_RTC_DRV_JZ4740=y
+# CONFIG_SCSI_DMA is not set
+CONFIG_SERIO=y
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SND=y
+CONFIG_SND_COMPRESS_OFFLOAD=y
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_JACK=y
+CONFIG_SND_JZ4740_SOC=y
+CONFIG_SND_JZ4740_SOC_I2S=y
+CONFIG_SND_JZ4740_SOC_QI_LB60=y
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+CONFIG_SND_PCM=y
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+CONFIG_SND_SOC=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_DMAENGINE_PCM=y
+CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+CONFIG_SND_SOC_JZ4740_CODEC=y
+CONFIG_SND_TIMER=y
+CONFIG_SOUND=y
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SPI=y
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_GPIO=y
+CONFIG_SPI_MASTER=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_STAGING is not set
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_SYN_COOKIES is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_ZBOOT=y
+CONFIG_SYS_SUPPORTS_ZBOOT_UART16550=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+# CONFIG_TINY_PREEMPT_RCU is not set
+CONFIG_TREE_PREEMPT_RCU=y
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_XZ=y
+CONFIG_UBIFS_FS_ZLIB=y
+CONFIG_UIDGID_CONVERTED=y
+CONFIG_UNINLINE_SPIN_UNLOCK=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_ARCH_HAS_XHCI is not set
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_COMMON=y
+CONFIG_USB_ETH=y
+# CONFIG_USB_ETH_EEM is not set
+# CONFIG_USB_ETH_RNDIS is not set
+CONFIG_USB_GADGET=y
+CONFIG_USB_JZ4740=y
+CONFIG_USB_LIBCOMPOSITE=y
+# CONFIG_USB_MV_U3D is not set
+# CONFIG_USB_PXA27X is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_VFAT_FS=y
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_VLAN_8021Q is not set
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_VT_CONSOLE_SLEEP=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_WATCHDOG is not set
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/xburst/patches-3.10/001-ubi-Read-only-the-vid-header-instead-of-the-whole-pa.patch b/target/linux/xburst/patches-3.10/001-ubi-Read-only-the-vid-header-instead-of-the-whole-pa.patch
new file mode 100644
index 0000000000..15d90bea4f
--- /dev/null
+++ b/target/linux/xburst/patches-3.10/001-ubi-Read-only-the-vid-header-instead-of-the-whole-pa.patch
@@ -0,0 +1,27 @@
+From 10fd63ee59dd9de4174f92f2f292b82fe46f1546 Mon Sep 17 00:00:00 2001
+From: Lars-Peter Clausen <lars@metafoo.de>
+Date: Tue, 15 Mar 2011 12:49:15 +0100
+Subject: [PATCH 01/16] ubi: Read only the vid header instead of the whole
+ page
+
+Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
+---
+ drivers/mtd/ubi/io.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/drivers/mtd/ubi/io.c b/drivers/mtd/ubi/io.c
+index bf79def..bc82962 100644
+--- a/drivers/mtd/ubi/io.c
++++ b/drivers/mtd/ubi/io.c
+@@ -1019,7 +1019,7 @@ int ubi_io_read_vid_hdr(struct ubi_device *ubi, int pnum,
+
+ p = (char *)vid_hdr - ubi->vid_hdr_shift;
+ read_err = ubi_io_read(ubi, p, pnum, ubi->vid_hdr_aloffset,
+- ubi->vid_hdr_alsize);
++ UBI_VID_HDR_SIZE + ubi->vid_hdr_shift);
+ if (read_err && read_err != UBI_IO_BITFLIPS && !mtd_is_eccerr(read_err))
+ return read_err;
+
+--
+1.7.10.4
+
diff --git a/target/linux/xburst/patches-3.10/002-NAND-Optimize-NAND_ECC_HW_OOB_FIRST-read.patch b/target/linux/xburst/patches-3.10/002-NAND-Optimize-NAND_ECC_HW_OOB_FIRST-read.patch
new file mode 100644
index 0000000000..da951dcbb9
--- /dev/null
+++ b/target/linux/xburst/patches-3.10/002-NAND-Optimize-NAND_ECC_HW_OOB_FIRST-read.patch
@@ -0,0 +1,50 @@
+From f2b7099d3986e59aab5792cecc052e440caf2cdd Mon Sep 17 00:00:00 2001
+From: Lars-Peter Clausen <lars@metafoo.de>
+Date: Sat, 26 Feb 2011 15:30:07 +0100
+Subject: [PATCH 02/16] NAND: Optimize NAND_ECC_HW_OOB_FIRST read
+
+Avoid sending unnecessary READ commands to the chip.
+
+Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
+---
+ drivers/mtd/nand/nand_base.c | 17 +++++++++++++----
+ 1 file changed, 13 insertions(+), 4 deletions(-)
+
+diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
+index dfcd0a5..287c433 100644
+--- a/drivers/mtd/nand/nand_base.c
++++ b/drivers/mtd/nand/nand_base.c
+@@ -1278,9 +1278,16 @@ static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd,
+ unsigned int max_bitflips = 0;
+
+ /* Read the OOB area first */
+- chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
+- chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+- chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
++ /* Read the OOB area first */
++ if (mtd->writesize > 512) {
++ chip->cmdfunc(mtd, NAND_CMD_READ0, mtd->writesize, page);
++ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
++ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, 0, -1);
++ } else {
++ chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
++ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
++ chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
++ }
+
+ for (i = 0; i < chip->ecc.total; i++)
+ ecc_code[i] = chip->oob_poi[eccpos[i]];
+@@ -1455,7 +1462,9 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
+ if (realpage != chip->pagebuf || oob) {
+ bufpoi = aligned ? buf : chip->buffers->databuf;
+
+- chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page);
++ if (chip->ecc.mode != NAND_ECC_HW_OOB_FIRST) {
++ chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page);
++ }
+
+ /*
+ * Now read the page into the buffer. Absent an error,
+--
+1.7.10.4
+
diff --git a/target/linux/xburst/patches-3.10/003-NAND-Add-support-for-subpage-reads-for-NAND_ECC_HW_O.patch b/target/linux/xburst/patches-3.10/003-NAND-Add-support-for-subpage-reads-for-NAND_ECC_HW_O.patch
new file mode 100644
index 0000000000..2e67ad91f9
--- /dev/null
+++ b/target/linux/xburst/patches-3.10/003-NAND-Add-support-for-subpage-reads-for-NAND_ECC_HW_O.patch
@@ -0,0 +1,141 @@
+From 90e325c5e16db262818bca442b00f5ac10b9c852 Mon Sep 17 00:00:00 2001
+From: Lars-Peter Clausen <lars@metafoo.de>
+Date: Tue, 15 Mar 2011 12:33:41 +0100
+Subject: [PATCH 03/16] NAND: Add support for subpage reads for
+ NAND_ECC_HW_OOB_FIRST
+
+Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
+---
+ drivers/mtd/nand/nand_base.c | 80 ++++++++++++++++++++++++++++++++++++++++--
+ include/linux/mtd/nand.h | 2 +-
+ 2 files changed, 78 insertions(+), 4 deletions(-)
+
+diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
+index 287c433..0fd6f2e 100644
+--- a/drivers/mtd/nand/nand_base.c
++++ b/drivers/mtd/nand/nand_base.c
+@@ -1118,7 +1118,7 @@ static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
+ * @bufpoi: buffer to store read data
+ */
+ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip,
+- uint32_t data_offs, uint32_t readlen, uint8_t *bufpoi)
++ uint32_t data_offs, uint32_t readlen, uint8_t *bufpoi, int page)
+ {
+ int start_step, end_step, num_steps;
+ uint32_t *eccpos = chip->ecc.layout->eccpos;
+@@ -1311,6 +1311,75 @@ static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd,
+ }
+
+ /**
++ * nand_read_subpage_hwecc_oob_first - [REPLACABLE] hw ecc based sub-page read function
++ * @mtd: mtd info structure
++ * @chip: nand chip info structure
++ * @data_offs: offset of requested data within the page
++ * @readlen: data length
++ * @bufpoi: buffer to store read data
++ * @page: page number to read
++ *
++ * Hardware ECC for large page chips, require OOB to be read first.
++ * For this ECC mode, the write_page method is re-used from ECC_HW.
++ * These methods read/write ECC from the OOB area, unlike the
++ * ECC_HW_SYNDROME support with multiple ECC steps, follows the
++ * "infix ECC" scheme and reads/writes ECC from the data area, by
++ * overwriting the NAND manufacturer bad block markings.
++ */
++static int nand_read_subpage_hwecc_oob_first(struct mtd_info *mtd, struct nand_chip *chip,
++ uint32_t data_offs, uint32_t readlen, uint8_t *bufpoi, int page)
++{
++ int start_step, end_step, num_steps;
++ uint32_t *eccpos = chip->ecc.layout->eccpos;
++ uint8_t *p;
++ int data_col_addr;
++ int eccsize = chip->ecc.size;
++ int eccbytes = chip->ecc.bytes;
++ uint8_t *ecc_code = chip->buffers->ecccode;
++ uint8_t *ecc_calc = chip->buffers->ecccalc;
++ int i;
++
++ /* Column address wihin the page aligned to ECC size */
++ start_step = data_offs / chip->ecc.size;
++ end_step = (data_offs + readlen - 1) / chip->ecc.size;
++ num_steps = end_step - start_step + 1;
++
++ data_col_addr = start_step * chip->ecc.size;
++
++ /* Read the OOB area first */
++ if (mtd->writesize > 512) {
++ chip->cmdfunc(mtd, NAND_CMD_READ0, mtd->writesize, page);
++ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
++ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, data_col_addr, -1);
++ } else {
++ chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
++ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
++ chip->cmdfunc(mtd, NAND_CMD_READ0, data_col_addr, page);
++ }
++
++ for (i = 0; i < chip->ecc.total; i++)
++ ecc_code[i] = chip->oob_poi[eccpos[i]];
++
++ p = bufpoi + data_col_addr;
++
++ for (i = eccbytes * start_step; num_steps; num_steps--, i += eccbytes, p += eccsize) {
++ int stat;
++
++ chip->ecc.hwctl(mtd, NAND_ECC_READ);
++ chip->read_buf(mtd, p, eccsize);
++ chip->ecc.calculate(mtd, p, &ecc_calc[i]);
++
++ stat = chip->ecc.correct(mtd, p, &ecc_code[i], NULL);
++ if (stat < 0)
++ mtd->ecc_stats.failed++;
++ else
++ mtd->ecc_stats.corrected += stat;
++ }
++
++ return 0;
++}
++
++/**
+ * nand_read_page_syndrome - [REPLACEABLE] hardware ECC syndrome based page read
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+@@ -1477,7 +1546,7 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
+ else if (!aligned && NAND_HAS_SUBPAGE_READ(chip) &&
+ !oob)
+ ret = chip->ecc.read_subpage(mtd, chip,
+- col, bytes, bufpoi);
++ col, bytes, bufpoi, page);
+ else
+ ret = chip->ecc.read_page(mtd, chip, bufpoi,
+ oob_required, page);
+@@ -3475,8 +3544,13 @@ int nand_scan_tail(struct mtd_info *mtd)
+ "hardware ECC not possible\n");
+ BUG();
+ }
+- if (!chip->ecc.read_page)
++ if (!chip->ecc.read_page) {
+ chip->ecc.read_page = nand_read_page_hwecc_oob_first;
++ if (!chip->ecc.read_subpage) {
++ chip->ecc.read_subpage = nand_read_subpage_hwecc_oob_first;
++ chip->options |= NAND_SUBPAGE_READ;
++ }
++ }
+
+ case NAND_ECC_HW:
+ /* Use standard hwecc read page function? */
+diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
+index ab63634..ff5b62e 100644
+--- a/include/linux/mtd/nand.h
++++ b/include/linux/mtd/nand.h
+@@ -349,7 +349,7 @@ struct nand_ecc_ctrl {
+ int (*read_page)(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf, int oob_required, int page);
+ int (*read_subpage)(struct mtd_info *mtd, struct nand_chip *chip,
+- uint32_t offs, uint32_t len, uint8_t *buf);
++ uint32_t offs, uint32_t len, uint8_t *buf, int page);
+ int (*write_subpage)(struct mtd_info *mtd, struct nand_chip *chip,
+ uint32_t offset, uint32_t data_len,
+ const uint8_t *data_buf, int oob_required);
+--
+1.7.10.4
+
diff --git a/target/linux/xburst/patches-3.10/004-MMC-JZ4740-Remove-duplicated-code.patch b/target/linux/xburst/patches-3.10/004-MMC-JZ4740-Remove-duplicated-code.patch
new file mode 100644
index 0000000000..7a8ab65552
--- /dev/null
+++ b/target/linux/xburst/patches-3.10/004-MMC-JZ4740-Remove-duplicated-code.patch
@@ -0,0 +1,29 @@
+From 3e46e1ea552c3cc5fb64dfeab22124a0e8b94495 Mon Sep 17 00:00:00 2001
+From: Paul Cercueil <paul@crapouillou.net>
+Date: Sun, 3 Jun 2012 12:45:23 +0200
+Subject: [PATCH 04/16] MMC: JZ4740: Remove duplicated code.
+
+Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
+---
+ drivers/mmc/host/jz4740_mmc.c | 5 -----
+ 1 file changed, 5 deletions(-)
+
+diff --git a/drivers/mmc/host/jz4740_mmc.c b/drivers/mmc/host/jz4740_mmc.c
+index 2391c6b..5a6ac99 100644
+--- a/drivers/mmc/host/jz4740_mmc.c
++++ b/drivers/mmc/host/jz4740_mmc.c
+@@ -560,11 +560,6 @@ static irqreturn_t jz_mmc_irq(int irq, void *devid)
+ if (cmd->data)
+ cmd->data->error = -EIO;
+ cmd->error = -EIO;
+- } else if (status & (JZ_MMC_STATUS_CRC_READ_ERROR |
+- JZ_MMC_STATUS_CRC_WRITE_ERROR)) {
+- if (cmd->data)
+- cmd->data->error = -EIO;
+- cmd->error = -EIO;
+ }
+
+ jz4740_mmc_set_irq_enabled(host, irq_reg, false);
+--
+1.7.10.4
+
diff --git a/target/linux/xburst/patches-3.10/005-MMC-JZ4740-Fix-handling-of-read-errors.patch b/target/linux/xburst/patches-3.10/005-MMC-JZ4740-Fix-handling-of-read-errors.patch
new file mode 100644
index 0000000000..aef88f0c99
--- /dev/null
+++ b/target/linux/xburst/patches-3.10/005-MMC-JZ4740-Fix-handling-of-read-errors.patch
@@ -0,0 +1,35 @@
+From 81d112d6c0e16fd0136ce2c5f511ba81ed1f23d2 Mon Sep 17 00:00:00 2001
+From: Paul Cercueil <paul@crapouillou.net>
+Date: Sun, 3 Jun 2012 13:07:19 +0200
+Subject: [PATCH 05/16] MMC: JZ4740: Fix handling of read errors.
+
+For no reason, the code handling write errors was implemented while
+the code handling read errors was missing.
+
+Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
+---
+ drivers/mmc/host/jz4740_mmc.c | 8 ++++++++
+ 1 file changed, 8 insertions(+)
+
+diff --git a/drivers/mmc/host/jz4740_mmc.c b/drivers/mmc/host/jz4740_mmc.c
+index 5a6ac99..ffe1181 100644
+--- a/drivers/mmc/host/jz4740_mmc.c
++++ b/drivers/mmc/host/jz4740_mmc.c
+@@ -231,6 +231,14 @@ static void jz4740_mmc_transfer_check_state(struct jz4740_mmc_host *host,
+ host->req->cmd->error = -EIO;
+ data->error = -EIO;
+ }
++ } else if (status & JZ_MMC_STATUS_READ_ERROR_MASK) {
++ if (status & (JZ_MMC_STATUS_TIMEOUT_READ)) {
++ host->req->cmd->error = -ETIMEDOUT;
++ data->error = -ETIMEDOUT;
++ } else {
++ host->req->cmd->error = -EIO;
++ data->error = -EIO;
++ }
+ }
+ }
+
+--
+1.7.10.4
+
diff --git a/target/linux/xburst/patches-3.10/006-ASoC-JZ4740-delay-activation-of-the-DAC-to-work-arou.patch b/target/linux/xburst/patches-3.10/006-ASoC-JZ4740-delay-activation-of-the-DAC-to-work-arou.patch
new file mode 100644
index 0000000000..b4b69a8a82
--- /dev/null
+++ b/target/linux/xburst/patches-3.10/006-ASoC-JZ4740-delay-activation-of-the-DAC-to-work-arou.patch
@@ -0,0 +1,40 @@
+From 46c628ae74578382ec324405dd4caafdbf3838bd Mon Sep 17 00:00:00 2001
+From: Paul Cercueil <paul@crapouillou.net>
+Date: Sat, 16 Jun 2012 19:36:31 +0200
+Subject: [PATCH 06/16] ASoC: JZ4740: delay activation of the DAC to work
+ around a sound bug.
+
+A proper fix of that bug would require a big rewrite of the driver,
+which (I hope) will be done eventually.
+
+Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
+---
+ sound/soc/codecs/jz4740.c | 9 ++++++---
+ 1 file changed, 6 insertions(+), 3 deletions(-)
+
+diff --git a/sound/soc/codecs/jz4740.c b/sound/soc/codecs/jz4740.c
+index 5f607b3..76ff580 100644
+--- a/sound/soc/codecs/jz4740.c
++++ b/sound/soc/codecs/jz4740.c
+@@ -249,12 +249,15 @@ static int jz4740_codec_set_bias_level(struct snd_soc_codec *codec,
+ case SND_SOC_BIAS_ON:
+ break;
+ case SND_SOC_BIAS_PREPARE:
+- mask = JZ4740_CODEC_1_VREF_DISABLE |
+- JZ4740_CODEC_1_VREF_AMP_DISABLE |
+- JZ4740_CODEC_1_HEADPHONE_POWERDOWN_M;
++ mask = JZ4740_CODEC_1_HEADPHONE_POWERDOWN_M;
+ value = 0;
+
+ regmap_update_bits(regmap, JZ4740_REG_CODEC_1, mask, value);
++
++ msleep(500);
++ mask = JZ4740_CODEC_1_VREF_DISABLE |
++ JZ4740_CODEC_1_VREF_AMP_DISABLE;
++ regmap_update_bits(regmap, JZ4740_REG_CODEC_1, mask, 0);
+ break;
+ case SND_SOC_BIAS_STANDBY:
+ /* The only way to clear the suspend flag is to reset the codec */
+--
+1.7.10.4
+
diff --git a/target/linux/xburst/patches-3.10/007-RTC-JZ4740-Init-the-regulator-register-on-startup.patch b/target/linux/xburst/patches-3.10/007-RTC-JZ4740-Init-the-regulator-register-on-startup.patch
new file mode 100644
index 0000000000..8dfae3a706
--- /dev/null
+++ b/target/linux/xburst/patches-3.10/007-RTC-JZ4740-Init-the-regulator-register-on-startup.patch
@@ -0,0 +1,61 @@
+From aff616f4a33bd3a9ab1506fdbe97fcfe285cb7b0 Mon Sep 17 00:00:00 2001
+From: Paul Cercueil <paul@crapouillou.net>
+Date: Thu, 13 Sep 2012 00:09:20 +0200
+Subject: [PATCH 07/16] RTC: JZ4740: Init the "regulator" register on startup.
+
+This register controls the accuracy of the RTC. uC/OS-II use
+the RTC as a 100Hz clock, and writes a completely wrong value
+on that register, that we have to overwrite if we want a working
+real-time clock.
+
+Signed-off-by: Paul Cercueil <paul@crapouillou.net>
+Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
+---
+ drivers/rtc/rtc-jz4740.c | 17 +++++++++++++++++
+ 1 file changed, 17 insertions(+)
+
+diff --git a/drivers/rtc/rtc-jz4740.c b/drivers/rtc/rtc-jz4740.c
+index 1e48686..722fb0c 100644
+--- a/drivers/rtc/rtc-jz4740.c
++++ b/drivers/rtc/rtc-jz4740.c
+@@ -14,6 +14,7 @@
+ *
+ */
+
++#include <linux/clk.h>
+ #include <linux/kernel.h>
+ #include <linux/module.h>
+ #include <linux/platform_device.h>
+@@ -215,6 +216,7 @@ static int jz4740_rtc_probe(struct platform_device *pdev)
+ int ret;
+ struct jz4740_rtc *rtc;
+ uint32_t scratchpad;
++ struct clk *rtc_clk;
+
+ rtc = kzalloc(sizeof(*rtc), GFP_KERNEL);
+ if (!rtc)
+@@ -280,6 +282,21 @@ static int jz4740_rtc_probe(struct platform_device *pdev)
+ }
+ }
+
++ rtc_clk = clk_get(&pdev->dev, "rtc");
++ if (IS_ERR(rtc_clk)) {
++ dev_err(&pdev->dev, "Failed to get RTC clock\n");
++ goto err_free_irq;
++ }
++
++ /* TODO: initialize the ADJC bits (25:16) to fine-tune
++ * the accuracy of the RTC */
++ ret = jz4740_rtc_reg_write(rtc, JZ_REG_RTC_REGULATOR,
++ (clk_get_rate(rtc_clk) - 1) & 0xffff);
++ clk_put(rtc_clk);
++
++ if (ret)
++ dev_warn(&pdev->dev, "Could not update RTC regulator register\n");
++
+ return 0;
+
+ err_free_irq:
+--
+1.7.10.4
+
diff --git a/target/linux/xburst/patches-3.10/008-Add-jz4740-udc-driver.patch b/target/linux/xburst/patches-3.10/008-Add-jz4740-udc-driver.patch
new file mode 100644
index 0000000000..6fc025b56f
--- /dev/null
+++ b/target/linux/xburst/patches-3.10/008-Add-jz4740-udc-driver.patch
@@ -0,0 +1,2330 @@
+From b3e08e29f6f32dfb400374dc96d0a2f61e6adceb Mon Sep 17 00:00:00 2001
+From: Lars-Peter Clausen <lars@metafoo.de>
+Date: Sat, 24 Apr 2010 12:18:46 +0200
+Subject: [PATCH 08/16] Add jz4740 udc driver
+
+Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
+---
+ drivers/usb/gadget/Kconfig | 8 +
+ drivers/usb/gadget/Makefile | 1 +
+ drivers/usb/gadget/gadget_chips.h | 1 +
+ drivers/usb/gadget/jz4740_udc.c | 2155 +++++++++++++++++++++++++++++++++++++
+ drivers/usb/gadget/jz4740_udc.h | 101 ++
+ 5 files changed, 2266 insertions(+)
+ create mode 100644 drivers/usb/gadget/jz4740_udc.c
+ create mode 100644 drivers/usb/gadget/jz4740_udc.h
+
+diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
+index f41aa0d..c96b7ef 100644
+--- a/drivers/usb/gadget/Kconfig
++++ b/drivers/usb/gadget/Kconfig
+@@ -192,6 +192,14 @@ config USB_FUSB300
+ help
+ Faraday usb device controller FUSB300 driver
+
++config USB_JZ4740
++ tristate "JZ4740 UDC"
++ depends on MACH_JZ4740
++ select USB_GADGET_DUALSPEED
++ help
++ Select this to support the Ingenic JZ4740 processor
++ high speed USB device controller.
++
+ config USB_OMAP
+ tristate "OMAP USB Device Controller"
+ depends on ARCH_OMAP1
+diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
+index 6afd166..f18db69 100644
+--- a/drivers/usb/gadget/Makefile
++++ b/drivers/usb/gadget/Makefile
+@@ -34,6 +34,7 @@ obj-$(CONFIG_USB_MV_UDC) += mv_udc.o
+ mv_udc-y := mv_udc_core.o
+ obj-$(CONFIG_USB_FUSB300) += fusb300_udc.o
+ obj-$(CONFIG_USB_MV_U3D) += mv_u3d_core.o
++obj-$(CONFIG_USB_JZ4740) += jz4740_udc.o
+
+ # USB Functions
+ usb_f_acm-y := f_acm.o
+diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h
+index bcd04bc..a3b069f 100644
+--- a/drivers/usb/gadget/gadget_chips.h
++++ b/drivers/usb/gadget/gadget_chips.h
+@@ -29,6 +29,7 @@
+ */
+ #define gadget_is_at91(g) (!strcmp("at91_udc", (g)->name))
+ #define gadget_is_goku(g) (!strcmp("goku_udc", (g)->name))
++#define gadget_is_jz4740(g) (!strcmp("ingenic_hsusb", (g)->name))
+ #define gadget_is_musbhdrc(g) (!strcmp("musb-hdrc", (g)->name))
+ #define gadget_is_net2280(g) (!strcmp("net2280", (g)->name))
+ #define gadget_is_pxa(g) (!strcmp("pxa25x_udc", (g)->name))
+diff --git a/drivers/usb/gadget/jz4740_udc.c b/drivers/usb/gadget/jz4740_udc.c
+new file mode 100644
+index 0000000..72e9a6c
+--- /dev/null
++++ b/drivers/usb/gadget/jz4740_udc.c
+@@ -0,0 +1,2155 @@
++/*
++ * linux/drivers/usb/gadget/jz4740_udc.c
++ *
++ * Ingenic JZ4740 on-chip high speed USB device controller
++ *
++ * Copyright (C) 2006 - 2008 Ingenic Semiconductor Inc.
++ * Author: <jlwei@ingenic.cn>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++/*
++ * This device has ep0, two bulk-in/interrupt-in endpoints, and one bulk-out endpoint.
++ *
++ * - Endpoint numbering is fixed: ep0, ep1in-int, ep2in-bulk, ep1out-bulk.
++ * - DMA works with bulk-in (channel 1) and bulk-out (channel 2) endpoints.
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/delay.h>
++#include <linux/ioport.h>
++#include <linux/slab.h>
++#include <linux/errno.h>
++#include <linux/init.h>
++#include <linux/list.h>
++#include <linux/interrupt.h>
++#include <linux/proc_fs.h>
++#include <linux/usb.h>
++#include <linux/usb/gadget.h>
++#include <linux/clk.h>
++
++#include <asm/byteorder.h>
++#include <asm/io.h>
++#include <asm/irq.h>
++#include <asm/mach-jz4740/clock.h>
++
++#include "jz4740_udc.h"
++
++#define JZ_REG_UDC_FADDR 0x00 /* Function Address 8-bit */
++#define JZ_REG_UDC_POWER 0x01 /* Power Management 8-bit */
++#define JZ_REG_UDC_INTRIN 0x02 /* Interrupt IN 16-bit */
++#define JZ_REG_UDC_INTROUT 0x04 /* Interrupt OUT 16-bit */
++#define JZ_REG_UDC_INTRINE 0x06 /* Intr IN enable 16-bit */
++#define JZ_REG_UDC_INTROUTE 0x08 /* Intr OUT enable 16-bit */
++#define JZ_REG_UDC_INTRUSB 0x0a /* Interrupt USB 8-bit */
++#define JZ_REG_UDC_INTRUSBE 0x0b /* Interrupt USB Enable 8-bit */
++#define JZ_REG_UDC_FRAME 0x0c /* Frame number 16-bit */
++#define JZ_REG_UDC_INDEX 0x0e /* Index register 8-bit */
++#define JZ_REG_UDC_TESTMODE 0x0f /* USB test mode 8-bit */
++
++#define JZ_REG_UDC_CSR0 0x12 /* EP0 CSR 8-bit */
++#define JZ_REG_UDC_INMAXP 0x10 /* EP1-2 IN Max Pkt Size 16-bit */
++#define JZ_REG_UDC_INCSR 0x12 /* EP1-2 IN CSR LSB 8/16bit */
++#define JZ_REG_UDC_INCSRH 0x13 /* EP1-2 IN CSR MSB 8-bit */
++
++#define JZ_REG_UDC_OUTMAXP 0x14 /* EP1 OUT Max Pkt Size 16-bit */
++#define JZ_REG_UDC_OUTCSR 0x16 /* EP1 OUT CSR LSB 8/16bit */
++#define JZ_REG_UDC_OUTCSRH 0x17 /* EP1 OUT CSR MSB 8-bit */
++#define JZ_REG_UDC_OUTCOUNT 0x18 /* bytes in EP0/1 OUT FIFO 16-bit */
++
++#define JZ_REG_UDC_EP_FIFO(x) (4 * (x) + 0x20)
++
++#define JZ_REG_UDC_EPINFO 0x78 /* Endpoint information */
++#define JZ_REG_UDC_RAMINFO 0x79 /* RAM information */
++
++#define JZ_REG_UDC_INTR 0x200 /* DMA pending interrupts */
++#define JZ_REG_UDC_CNTL1 0x204 /* DMA channel 1 control */
++#define JZ_REG_UDC_ADDR1 0x208 /* DMA channel 1 AHB memory addr */
++#define JZ_REG_UDC_COUNT1 0x20c /* DMA channel 1 byte count */
++#define JZ_REG_UDC_CNTL2 0x214 /* DMA channel 2 control */
++#define JZ_REG_UDC_ADDR2 0x218 /* DMA channel 2 AHB memory addr */
++#define JZ_REG_UDC_COUNT2 0x21c /* DMA channel 2 byte count */
++
++/* Power register bit masks */
++#define USB_POWER_SUSPENDM 0x01
++#define USB_POWER_RESUME 0x04
++#define USB_POWER_HSMODE 0x10
++#define USB_POWER_HSENAB 0x20
++#define USB_POWER_SOFTCONN 0x40
++
++/* Interrupt register bit masks */
++#define USB_INTR_SUSPEND 0x01
++#define USB_INTR_RESUME 0x02
++#define USB_INTR_RESET 0x04
++
++#define USB_INTR_EP0 0x0001
++#define USB_INTR_INEP1 0x0002
++#define USB_INTR_INEP2 0x0004
++#define USB_INTR_OUTEP1 0x0002
++
++/* CSR0 bit masks */
++#define USB_CSR0_OUTPKTRDY 0x01
++#define USB_CSR0_INPKTRDY 0x02
++#define USB_CSR0_SENTSTALL 0x04
++#define USB_CSR0_DATAEND 0x08
++#define USB_CSR0_SETUPEND 0x10
++#define USB_CSR0_SENDSTALL 0x20
++#define USB_CSR0_SVDOUTPKTRDY 0x40
++#define USB_CSR0_SVDSETUPEND 0x80
++
++/* Endpoint CSR register bits */
++#define USB_INCSRH_AUTOSET 0x80
++#define USB_INCSRH_ISO 0x40
++#define USB_INCSRH_MODE 0x20
++#define USB_INCSRH_DMAREQENAB 0x10
++#define USB_INCSRH_DMAREQMODE 0x04
++#define USB_INCSR_CDT 0x40
++#define USB_INCSR_SENTSTALL 0x20
++#define USB_INCSR_SENDSTALL 0x10
++#define USB_INCSR_FF 0x08
++#define USB_INCSR_UNDERRUN 0x04
++#define USB_INCSR_FFNOTEMPT 0x02
++#define USB_INCSR_INPKTRDY 0x01
++
++#define USB_OUTCSRH_AUTOCLR 0x80
++#define USB_OUTCSRH_ISO 0x40
++#define USB_OUTCSRH_DMAREQENAB 0x20
++#define USB_OUTCSRH_DNYT 0x10
++#define USB_OUTCSRH_DMAREQMODE 0x08
++#define USB_OUTCSR_CDT 0x80
++#define USB_OUTCSR_SENTSTALL 0x40
++#define USB_OUTCSR_SENDSTALL 0x20
++#define USB_OUTCSR_FF 0x10
++#define USB_OUTCSR_DATAERR 0x08
++#define USB_OUTCSR_OVERRUN 0x04
++#define USB_OUTCSR_FFFULL 0x02
++#define USB_OUTCSR_OUTPKTRDY 0x01
++
++/* DMA control bits */
++#define USB_CNTL_ENA 0x01
++#define USB_CNTL_DIR_IN 0x02
++#define USB_CNTL_MODE_1 0x04
++#define USB_CNTL_INTR_EN 0x08
++#define USB_CNTL_EP(n) ((n) << 4)
++#define USB_CNTL_BURST_0 (0 << 9)
++#define USB_CNTL_BURST_4 (1 << 9)
++#define USB_CNTL_BURST_8 (2 << 9)
++#define USB_CNTL_BURST_16 (3 << 9)
++
++
++#ifndef DEBUG
++# define DEBUG(fmt,args...) do {} while(0)
++#endif
++#ifndef DEBUG_EP0
++# define NO_STATES
++# define DEBUG_EP0(fmt,args...) do {} while(0)
++#endif
++#ifndef DEBUG_SETUP
++# define DEBUG_SETUP(fmt,args...) do {} while(0)
++#endif
++
++/*
++ * Local declarations.
++ */
++static void jz4740_ep0_kick(struct jz4740_udc *dev, struct jz4740_ep *ep);
++static void jz4740_handle_ep0(struct jz4740_udc *dev, uint32_t intr);
++
++static void done(struct jz4740_ep *ep, struct jz4740_request *req,
++ int status);
++static void pio_irq_enable(struct jz4740_ep *ep);
++static void pio_irq_disable(struct jz4740_ep *ep);
++static void stop_activity(struct jz4740_udc *dev,
++ struct usb_gadget_driver *driver);
++static void nuke(struct jz4740_ep *ep, int status);
++static void flush(struct jz4740_ep *ep);
++static void udc_set_address(struct jz4740_udc *dev, unsigned char address);
++
++/*-------------------------------------------------------------------------*/
++
++/* inline functions of register read/write/set/clear */
++
++static inline uint8_t usb_readb(struct jz4740_udc *udc, size_t reg)
++{
++ return readb(udc->base + reg);
++}
++
++static inline uint16_t usb_readw(struct jz4740_udc *udc, size_t reg)
++{
++ return readw(udc->base + reg);
++}
++
++static inline uint32_t usb_readl(struct jz4740_udc *udc, size_t reg)
++{
++ return readl(udc->base + reg);
++}
++
++static inline void usb_writeb(struct jz4740_udc *udc, size_t reg, uint8_t val)
++{
++ writeb(val, udc->base + reg);
++}
++
++static inline void usb_writew(struct jz4740_udc *udc, size_t reg, uint16_t val)
++{
++ writew(val, udc->base + reg);
++}
++
++static inline void usb_writel(struct jz4740_udc *udc, size_t reg, uint32_t val)
++{
++ writel(val, udc->base + reg);
++}
++
++static inline void usb_setb(struct jz4740_udc *udc, size_t reg, uint8_t mask)
++{
++ usb_writeb(udc, reg, usb_readb(udc, reg) | mask);
++}
++
++static inline void usb_setw(struct jz4740_udc *udc, size_t reg, uint16_t mask)
++{
++ usb_writew(udc, reg, usb_readw(udc, reg) | mask);
++}
++
++static inline void usb_clearb(struct jz4740_udc *udc, size_t reg, uint8_t mask)
++{
++ usb_writeb(udc, reg, usb_readb(udc, reg) & ~mask);
++}
++
++static inline void usb_clearw(struct jz4740_udc *udc, size_t reg, uint16_t mask)
++{
++ usb_writew(udc, reg, usb_readw(udc, reg) & ~mask);
++}
++
++/*-------------------------------------------------------------------------*/
++
++static inline void jz_udc_set_index(struct jz4740_udc *udc, uint8_t index)
++{
++ usb_writeb(udc, JZ_REG_UDC_INDEX, index);
++}
++
++static inline void jz_udc_select_ep(struct jz4740_ep *ep)
++{
++ jz_udc_set_index(ep->dev, ep_index(ep));
++}
++
++static inline int write_packet(struct jz4740_ep *ep,
++ struct jz4740_request *req, unsigned int count)
++{
++ uint8_t *buf;
++ unsigned int length;
++ void __iomem *fifo = ep->dev->base + ep->fifo;
++
++ DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
++
++ buf = req->req.buf + req->req.actual;
++
++ length = req->req.length - req->req.actual;
++ if (length > count)
++ length = count;
++ req->req.actual += length;
++
++ DEBUG("Write %d (count %d), fifo %x\n", length, count, ep->fifo);
++
++ writesl(fifo, buf, length >> 2);
++ writesb(fifo, &buf[length - (length & 3)], length & 3);
++
++ return length;
++}
++
++static int read_packet(struct jz4740_ep *ep,
++ struct jz4740_request *req, unsigned int count)
++{
++ uint8_t *buf;
++ unsigned int length;
++ void __iomem *fifo = ep->dev->base + ep->fifo;
++ DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
++
++ buf = req->req.buf + req->req.actual;
++
++ length = req->req.length - req->req.actual;
++ if (length > count)
++ length = count;
++ req->req.actual += length;
++
++ DEBUG("Read %d, fifo %x\n", length, ep->fifo);
++
++ readsl(fifo, buf, length >> 2);
++ readsb(fifo, &buf[length - (length & 3)], length & 3);
++
++ return length;
++}
++
++/*-------------------------------------------------------------------------*/
++
++/*
++ * udc_disable - disable USB device controller
++ */
++static void udc_disable(struct jz4740_udc *dev)
++{
++ DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
++
++ udc_set_address(dev, 0);
++
++ /* Disable interrupts */
++ usb_writew(dev, JZ_REG_UDC_INTRINE, 0);
++ usb_writew(dev, JZ_REG_UDC_INTROUTE, 0);
++ usb_writeb(dev, JZ_REG_UDC_INTRUSBE, 0);
++
++ /* Disable DMA */
++ usb_writel(dev, JZ_REG_UDC_CNTL1, 0);
++ usb_writel(dev, JZ_REG_UDC_CNTL2, 0);
++
++ /* Disconnect from usb */
++ usb_clearb(dev, JZ_REG_UDC_POWER, USB_POWER_SOFTCONN);
++
++ /* Disable the USB PHY */
++ clk_disable_unprepare(dev->clk);
++
++ dev->ep0state = WAIT_FOR_SETUP;
++ dev->gadget.speed = USB_SPEED_UNKNOWN;
++
++ return;
++}
++
++/*
++ * udc_reinit - initialize software state
++ */
++static void udc_reinit(struct jz4740_udc *dev)
++{
++ int i;
++ DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
++
++ /* device/ep0 records init */
++ INIT_LIST_HEAD(&dev->gadget.ep_list);
++ INIT_LIST_HEAD(&dev->gadget.ep0->ep_list);
++ dev->ep0state = WAIT_FOR_SETUP;
++
++ for (i = 0; i < UDC_MAX_ENDPOINTS; i++) {
++ struct jz4740_ep *ep = &dev->ep[i];
++
++ if (i != 0)
++ list_add_tail(&ep->ep.ep_list, &dev->gadget.ep_list);
++
++ INIT_LIST_HEAD(&ep->queue);
++ ep->desc = 0;
++ ep->stopped = 0;
++ }
++}
++
++/* until it's enabled, this UDC should be completely invisible
++ * to any USB host.
++ */
++static void udc_enable(struct jz4740_udc *dev)
++{
++ int i;
++ DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
++
++ /* UDC state is incorrect - Added by River */
++ if (dev->state != UDC_STATE_ENABLE) {
++ return;
++ }
++
++ dev->gadget.speed = USB_SPEED_UNKNOWN;
++
++ /* Flush FIFO for each */
++ for (i = 0; i < UDC_MAX_ENDPOINTS; i++) {
++ struct jz4740_ep *ep = &dev->ep[i];
++
++ jz_udc_select_ep(ep);
++ flush(ep);
++ }
++
++ /* Set this bit to allow the UDC entering low-power mode when
++ * there are no actions on the USB bus.
++ * UDC still works during this bit was set.
++ */
++ jz4740_clock_udc_enable_auto_suspend();
++
++ /* Enable the USB PHY */
++ clk_prepare_enable(dev->clk);
++
++ /* Disable interrupts */
++/* usb_writew(dev, JZ_REG_UDC_INTRINE, 0);
++ usb_writew(dev, JZ_REG_UDC_INTROUTE, 0);
++ usb_writeb(dev, JZ_REG_UDC_INTRUSBE, 0);*/
++
++ /* Enable interrupts */
++ usb_setw(dev, JZ_REG_UDC_INTRINE, USB_INTR_EP0);
++ usb_setb(dev, JZ_REG_UDC_INTRUSBE, USB_INTR_RESET);
++ /* Don't enable rest of the interrupts */
++ /* usb_setw(dev, JZ_REG_UDC_INTRINE, USB_INTR_INEP1 | USB_INTR_INEP2);
++ usb_setw(dev, JZ_REG_UDC_INTROUTE, USB_INTR_OUTEP1); */
++
++ /* Enable SUSPEND */
++ /* usb_setb(dev, JZ_REG_UDC_POWER, USB_POWER_SUSPENDM); */
++
++ /* Enable HS Mode */
++ usb_setb(dev, JZ_REG_UDC_POWER, USB_POWER_HSENAB);
++
++ /* Let host detect UDC:
++ * Software must write a 1 to the PMR:USB_POWER_SOFTCONN bit to turn this
++ * transistor on and pull the USBDP pin HIGH.
++ */
++ usb_setb(dev, JZ_REG_UDC_POWER, USB_POWER_SOFTCONN);
++
++ return;
++}
++
++/*-------------------------------------------------------------------------*/
++
++/* keeping it simple:
++ * - one bus driver, initted first;
++ * - one function driver, initted second
++ */
++
++/*
++ * Register entry point for the peripheral controller driver.
++ */
++
++static int jz4740_udc_start(struct usb_gadget *gadget,
++ struct usb_gadget_driver *driver)
++{
++ struct jz4740_udc *udc = container_of(gadget, struct jz4740_udc, gadget);
++
++ /* hook up the driver */
++ udc->driver = driver;
++
++
++ /* then enable host detection and ep0; and we're ready
++ * for set_configuration as well as eventual disconnect.
++ */
++ udc_enable(udc);
++
++ DEBUG("%s: registered gadget driver '%s'\n", gadget->name,
++ driver->driver.name);
++
++ return 0;
++}
++
++static void stop_activity(struct jz4740_udc *dev,
++ struct usb_gadget_driver *driver)
++{
++ int i;
++
++ DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
++
++ /* don't disconnect drivers more than once */
++ if (dev->gadget.speed == USB_SPEED_UNKNOWN)
++ driver = 0;
++ dev->gadget.speed = USB_SPEED_UNKNOWN;
++
++ /* prevent new request submissions, kill any outstanding requests */
++ for (i = 0; i < UDC_MAX_ENDPOINTS; i++) {
++ struct jz4740_ep *ep = &dev->ep[i];
++
++ ep->stopped = 1;
++
++ jz_udc_select_ep(ep);
++ nuke(ep, -ESHUTDOWN);
++ }
++
++ /* report disconnect; the driver is already quiesced */
++ if (driver) {
++ spin_unlock(&dev->lock);
++ driver->disconnect(&dev->gadget);
++ spin_lock(&dev->lock);
++ }
++
++ /* re-init driver-visible data structures */
++ udc_reinit(dev);
++}
++
++
++/*
++ * Unregister entry point for the peripheral controller driver.
++ */
++static int jz4740_udc_stop(struct usb_gadget *gadget,
++ struct usb_gadget_driver *driver)
++{
++ struct jz4740_udc *udc = container_of(gadget, struct jz4740_udc, gadget);
++ unsigned long flags;
++ DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
++
++ spin_lock_irqsave(&udc->lock, flags);
++ udc->driver = NULL;
++ stop_activity(udc, driver);
++ spin_unlock_irqrestore(&udc->lock, flags);
++
++ udc_disable(udc);
++
++ DEBUG("unregistered driver '%s'\n", driver->driver.name);
++
++ return 0;
++}
++
++/*-------------------------------------------------------------------------*/
++
++/** Write request to FIFO (max write == maxp size)
++ * Return: 0 = still running, 1 = completed, negative = errno
++ * NOTE: INDEX register must be set for EP
++ */
++static int write_fifo(struct jz4740_ep *ep, struct jz4740_request *req)
++{
++ struct jz4740_udc *dev = ep->dev;
++ uint32_t max, csr;
++
++ DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
++ max = le16_to_cpu(ep->desc->wMaxPacketSize);
++
++ csr = usb_readb(dev, ep->csr);
++
++ if (!(csr & USB_INCSR_FFNOTEMPT)) {
++ unsigned count;
++ int is_last, is_short;
++
++ count = write_packet(ep, req, max);
++ usb_setb(dev, ep->csr, USB_INCSR_INPKTRDY);
++
++ /* last packet is usually short (or a zlp) */
++ if (unlikely(count != max))
++ is_last = is_short = 1;
++ else {
++ if (likely(req->req.length != req->req.actual)
++ || req->req.zero)
++ is_last = 0;
++ else
++ is_last = 1;
++ /* interrupt/iso maxpacket may not fill the fifo */
++ is_short = unlikely(max < ep_maxpacket(ep));
++ }
++
++ DEBUG("%s: wrote %s %d bytes%s%s %d left %p\n", __FUNCTION__,
++ ep->ep.name, count,
++ is_last ? "/L" : "", is_short ? "/S" : "",
++ req->req.length - req->req.actual, req);
++
++ /* requests complete when all IN data is in the FIFO */
++ if (is_last) {
++ done(ep, req, 0);
++ if (list_empty(&ep->queue)) {
++ pio_irq_disable(ep);
++ }
++ return 1;
++ }
++ } else {
++ DEBUG("Hmm.. %d ep FIFO is not empty!\n", ep_index(ep));
++ }
++
++ return 0;
++}
++
++/** Read to request from FIFO (max read == bytes in fifo)
++ * Return: 0 = still running, 1 = completed, negative = errno
++ * NOTE: INDEX register must be set for EP
++ */
++static int read_fifo(struct jz4740_ep *ep, struct jz4740_request *req)
++{
++ struct jz4740_udc *dev = ep->dev;
++ uint32_t csr;
++ unsigned count, is_short;
++
++ /* make sure there's a packet in the FIFO. */
++ csr = usb_readb(dev, ep->csr);
++ if (!(csr & USB_OUTCSR_OUTPKTRDY)) {
++ DEBUG("%s: Packet NOT ready!\n", __FUNCTION__);
++ return -EINVAL;
++ }
++
++ /* read all bytes from this packet */
++ count = usb_readw(dev, JZ_REG_UDC_OUTCOUNT);
++
++ is_short = (count < ep->ep.maxpacket);
++
++ count = read_packet(ep, req, count);
++
++ DEBUG("read %s %02x, %d bytes%s req %p %d/%d\n",
++ ep->ep.name, csr, count,
++ is_short ? "/S" : "", req, req->req.actual, req->req.length);
++
++ /* Clear OutPktRdy */
++ usb_clearb(dev, ep->csr, USB_OUTCSR_OUTPKTRDY);
++
++ /* completion */
++ if (is_short || req->req.actual == req->req.length) {
++ done(ep, req, 0);
++
++ if (list_empty(&ep->queue))
++ pio_irq_disable(ep);
++ return 1;
++ }
++
++ /* finished that packet. the next one may be waiting... */
++ return 0;
++}
++
++/*
++ * done - retire a request; caller blocked irqs
++ * INDEX register is preserved to keep same
++ */
++static void done(struct jz4740_ep *ep, struct jz4740_request *req, int status)
++{
++ unsigned int stopped = ep->stopped;
++ uint32_t index;
++
++ DEBUG("%s, %p\n", __FUNCTION__, ep);
++ list_del_init(&req->queue);
++
++ if (likely(req->req.status == -EINPROGRESS))
++ req->req.status = status;
++ else
++ status = req->req.status;
++
++ if (status && status != -ESHUTDOWN)
++ DEBUG("complete %s req %p stat %d len %u/%u\n",
++ ep->ep.name, &req->req, status,
++ req->req.actual, req->req.length);
++
++ /* don't modify queue heads during completion callback */
++ ep->stopped = 1;
++ /* Read current index (completion may modify it) */
++ index = usb_readb(ep->dev, JZ_REG_UDC_INDEX);
++ spin_unlock_irqrestore(&ep->dev->lock, ep->dev->lock_flags);
++
++ req->req.complete(&ep->ep, &req->req);
++
++ spin_lock_irqsave(&ep->dev->lock, ep->dev->lock_flags);
++ /* Restore index */
++ jz_udc_set_index(ep->dev, index);
++ ep->stopped = stopped;
++}
++
++static inline unsigned int jz4740_udc_ep_irq_enable_reg(struct jz4740_ep *ep)
++{
++ if (ep_is_in(ep))
++ return JZ_REG_UDC_INTRINE;
++ else
++ return JZ_REG_UDC_INTROUTE;
++}
++
++/** Enable EP interrupt */
++static void pio_irq_enable(struct jz4740_ep *ep)
++{
++ DEBUG("%s: EP%d %s\n", __FUNCTION__, ep_index(ep), ep_is_in(ep) ? "IN": "OUT");
++
++ usb_setw(ep->dev, jz4740_udc_ep_irq_enable_reg(ep), BIT(ep_index(ep)));
++}
++
++/** Disable EP interrupt */
++static void pio_irq_disable(struct jz4740_ep *ep)
++{
++ DEBUG("%s: EP%d %s\n", __FUNCTION__, ep_index(ep), ep_is_in(ep) ? "IN": "OUT");
++
++ usb_clearw(ep->dev, jz4740_udc_ep_irq_enable_reg(ep), BIT(ep_index(ep)));
++}
++
++/*
++ * nuke - dequeue ALL requests
++ */
++static void nuke(struct jz4740_ep *ep, int status)
++{
++ struct jz4740_request *req;
++
++ DEBUG("%s, %p\n", __FUNCTION__, ep);
++
++ /* Flush FIFO */
++ flush(ep);
++
++ /* called with irqs blocked */
++ while (!list_empty(&ep->queue)) {
++ req = list_entry(ep->queue.next, struct jz4740_request, queue);
++ done(ep, req, status);
++ }
++
++ /* Disable IRQ if EP is enabled (has descriptor) */
++ if (ep->desc)
++ pio_irq_disable(ep);
++}
++
++/** Flush EP FIFO
++ * NOTE: INDEX register must be set before this call
++ */
++static void flush(struct jz4740_ep *ep)
++{
++ DEBUG("%s: %s\n", __FUNCTION__, ep->ep.name);
++
++ switch (ep->type) {
++ case ep_bulk_in:
++ case ep_interrupt:
++ usb_setb(ep->dev, ep->csr, USB_INCSR_FF);
++ break;
++ case ep_bulk_out:
++ usb_setb(ep->dev, ep->csr, USB_OUTCSR_FF);
++ break;
++ case ep_control:
++ break;
++ }
++}
++
++/**
++ * jz4740_in_epn - handle IN interrupt
++ */
++static void jz4740_in_epn(struct jz4740_udc *dev, uint32_t ep_idx, uint32_t intr)
++{
++ uint32_t csr;
++ struct jz4740_ep *ep = &dev->ep[ep_idx + 1];
++ struct jz4740_request *req;
++ DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
++
++ jz_udc_select_ep(ep);
++
++ csr = usb_readb(dev, ep->csr);
++ DEBUG("%s: %d, csr %x\n", __FUNCTION__, ep_idx, csr);
++
++ if (csr & USB_INCSR_SENTSTALL) {
++ DEBUG("USB_INCSR_SENTSTALL\n");
++ usb_clearb(dev, ep->csr, USB_INCSR_SENTSTALL);
++ return;
++ }
++
++ if (!ep->desc) {
++ DEBUG("%s: NO EP DESC\n", __FUNCTION__);
++ return;
++ }
++
++ if (!list_empty(&ep->queue)) {
++ req = list_first_entry(&ep->queue, struct jz4740_request, queue);
++ write_fifo(ep, req);
++ }
++}
++
++/*
++ * Bulk OUT (recv)
++ */
++static void jz4740_out_epn(struct jz4740_udc *dev, uint32_t ep_idx, uint32_t intr)
++{
++ struct jz4740_ep *ep = &dev->ep[ep_idx];
++ struct jz4740_request *req;
++
++ DEBUG("%s: %d\n", __FUNCTION__, ep_idx);
++
++ jz_udc_select_ep(ep);
++ if (ep->desc) {
++ uint32_t csr;
++
++ while ((csr = usb_readb(dev, ep->csr)) &
++ (USB_OUTCSR_OUTPKTRDY | USB_OUTCSR_SENTSTALL)) {
++ DEBUG("%s: %x\n", __FUNCTION__, csr);
++
++ if (csr & USB_OUTCSR_SENTSTALL) {
++ DEBUG("%s: stall sent, flush fifo\n",
++ __FUNCTION__);
++ /* usb_set(USB_OUT_CSR1_FIFO_FLUSH, ep->csr1); */
++ flush(ep);
++ } else if (csr & USB_OUTCSR_OUTPKTRDY) {
++ if (list_empty(&ep->queue))
++ req = 0;
++ else
++ req =
++ list_entry(ep->queue.next,
++ struct jz4740_request,
++ queue);
++
++ if (!req) {
++ DEBUG("%s: NULL REQ %d\n",
++ __FUNCTION__, ep_idx);
++ break;
++ } else {
++ read_fifo(ep, req);
++ }
++ }
++ }
++ } else {
++ /* Throw packet away.. */
++ DEBUG("%s: ep %p ep_indx %d No descriptor?!?\n", __FUNCTION__, ep, ep_idx);
++ flush(ep);
++ }
++}
++
++/** Halt specific EP
++ * Return 0 if success
++ * NOTE: Sets INDEX register to EP !
++ */
++static int jz4740_set_halt(struct usb_ep *_ep, int value)
++{
++ struct jz4740_udc *dev;
++ struct jz4740_ep *ep;
++ unsigned long flags;
++
++ DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
++
++ ep = container_of(_ep, struct jz4740_ep, ep);
++ if (unlikely(!_ep || (!ep->desc && ep->type != ep_control))) {
++ DEBUG("%s, bad ep\n", __FUNCTION__);
++ return -EINVAL;
++ }
++
++ dev = ep->dev;
++
++ spin_lock_irqsave(&dev->lock, flags);
++
++ jz_udc_select_ep(ep);
++
++ DEBUG("%s, ep %d, val %d\n", __FUNCTION__, ep_index(ep), value);
++
++ if (ep_index(ep) == 0) {
++ /* EP0 */
++ usb_setb(dev, JZ_REG_UDC_CSR0, USB_CSR0_SENDSTALL);
++ } else if (ep_is_in(ep)) {
++ uint32_t csr = usb_readb(dev, ep->csr);
++ if (value && ((csr & USB_INCSR_FFNOTEMPT)
++ || !list_empty(&ep->queue))) {
++ /*
++ * Attempts to halt IN endpoints will fail (returning -EAGAIN)
++ * if any transfer requests are still queued, or if the controller
++ * FIFO still holds bytes that the host hasnÂ’t collected.
++ */
++ spin_unlock_irqrestore(&dev->lock, flags);
++ DEBUG
++ ("Attempt to halt IN endpoint failed (returning -EAGAIN) %d %d\n",
++ (csr & USB_INCSR_FFNOTEMPT),
++ !list_empty(&ep->queue));
++ return -EAGAIN;
++ }
++ flush(ep);
++ if (value) {
++ usb_setb(dev, ep->csr, USB_INCSR_SENDSTALL);
++ } else {
++ usb_clearb(dev, ep->csr, USB_INCSR_SENDSTALL);
++ usb_setb(dev, ep->csr, USB_INCSR_CDT);
++ }
++ } else {
++
++ flush(ep);
++ if (value) {
++ usb_setb(dev, ep->csr, USB_OUTCSR_SENDSTALL);
++ } else {
++ usb_clearb(dev, ep->csr, USB_OUTCSR_SENDSTALL);
++ usb_setb(dev, ep->csr, USB_OUTCSR_CDT);
++ }
++ }
++
++ ep->stopped = value;
++
++ spin_unlock_irqrestore(&dev->lock, flags);
++
++ DEBUG("%s %s halted\n", _ep->name, value == 0 ? "NOT" : "IS");
++
++ return 0;
++}
++
++
++static int jz4740_ep_enable(struct usb_ep *_ep,
++ const struct usb_endpoint_descriptor *desc)
++{
++ struct jz4740_ep *ep;
++ struct jz4740_udc *dev;
++ unsigned long flags;
++ uint32_t max, csrh = 0;
++
++ DEBUG("%s: trying to enable %s\n", __FUNCTION__, _ep->name);
++
++ if (!_ep || !desc)
++ return -EINVAL;
++
++ ep = container_of(_ep, struct jz4740_ep, ep);
++ if (ep->desc || ep->type == ep_control
++ || desc->bDescriptorType != USB_DT_ENDPOINT
++ || ep->bEndpointAddress != desc->bEndpointAddress) {
++ DEBUG("%s, bad ep or descriptor\n", __FUNCTION__);
++ return -EINVAL;
++ }
++
++ /* xfer types must match, except that interrupt ~= bulk */
++ if (ep->bmAttributes != desc->bmAttributes
++ && ep->bmAttributes != USB_ENDPOINT_XFER_BULK
++ && desc->bmAttributes != USB_ENDPOINT_XFER_INT) {
++ DEBUG("%s, %s type mismatch\n", __FUNCTION__, _ep->name);
++ return -EINVAL;
++ }
++
++ dev = ep->dev;
++ if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) {
++ DEBUG("%s, bogus device state\n", __FUNCTION__);
++ return -ESHUTDOWN;
++ }
++
++ max = le16_to_cpu(desc->wMaxPacketSize);
++
++ spin_lock_irqsave(&ep->dev->lock, flags);
++
++ /* Configure the endpoint */
++ jz_udc_select_ep(ep);
++ if (ep_is_in(ep)) {
++ usb_writew(dev, JZ_REG_UDC_INMAXP, max);
++ switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
++ case USB_ENDPOINT_XFER_BULK:
++ case USB_ENDPOINT_XFER_INT:
++ csrh &= ~USB_INCSRH_ISO;
++ break;
++ case USB_ENDPOINT_XFER_ISOC:
++ csrh |= USB_INCSRH_ISO;
++ break;
++ }
++ usb_writeb(dev, JZ_REG_UDC_INCSRH, csrh);
++ }
++ else {
++ usb_writew(dev, JZ_REG_UDC_OUTMAXP, max);
++ switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
++ case USB_ENDPOINT_XFER_BULK:
++ csrh &= ~USB_OUTCSRH_ISO;
++ break;
++ case USB_ENDPOINT_XFER_INT:
++ csrh &= ~USB_OUTCSRH_ISO;
++ csrh |= USB_OUTCSRH_DNYT;
++ break;
++ case USB_ENDPOINT_XFER_ISOC:
++ csrh |= USB_OUTCSRH_ISO;
++ break;
++ }
++ usb_writeb(dev, JZ_REG_UDC_OUTCSRH, csrh);
++ }
++
++
++ ep->stopped = 0;
++ ep->desc = desc;
++ ep->ep.maxpacket = max;
++
++ spin_unlock_irqrestore(&ep->dev->lock, flags);
++
++ /* Reset halt state (does flush) */
++ jz4740_set_halt(_ep, 0);
++
++ DEBUG("%s: enabled %s\n", __FUNCTION__, _ep->name);
++
++ return 0;
++}
++
++/** Disable EP
++ * NOTE: Sets INDEX register
++ */
++static int jz4740_ep_disable(struct usb_ep *_ep)
++{
++ struct jz4740_ep *ep;
++ unsigned long flags;
++
++ DEBUG("%s, %p\n", __FUNCTION__, _ep);
++
++ ep = container_of(_ep, struct jz4740_ep, ep);
++ if (!_ep || !ep->desc) {
++ DEBUG("%s, %s not enabled\n", __FUNCTION__,
++ _ep ? ep->ep.name : NULL);
++ return -EINVAL;
++ }
++
++ spin_lock_irqsave(&ep->dev->lock, flags);
++
++ jz_udc_select_ep(ep);
++
++ /* Nuke all pending requests (does flush) */
++ nuke(ep, -ESHUTDOWN);
++
++ /* Disable ep IRQ */
++ pio_irq_disable(ep);
++
++ ep->desc = 0;
++ ep->stopped = 1;
++
++ spin_unlock_irqrestore(&ep->dev->lock, flags);
++
++ DEBUG("%s: disabled %s\n", __FUNCTION__, _ep->name);
++ return 0;
++}
++
++static struct usb_request *jz4740_alloc_request(struct usb_ep *ep, gfp_t gfp_flags)
++{
++ struct jz4740_request *req;
++
++ req = kzalloc(sizeof(*req), gfp_flags);
++ if (!req)
++ return NULL;
++
++ INIT_LIST_HEAD(&req->queue);
++
++ return &req->req;
++}
++
++static void jz4740_free_request(struct usb_ep *ep, struct usb_request *_req)
++{
++ struct jz4740_request *req;
++
++ req = container_of(_req, struct jz4740_request, req);
++ WARN_ON(!list_empty(&req->queue));
++
++ kfree(req);
++}
++
++/*--------------------------------------------------------------------*/
++
++/** Queue one request
++ * Kickstart transfer if needed
++ * NOTE: Sets INDEX register
++ */
++static int jz4740_queue(struct usb_ep *_ep, struct usb_request *_req,
++ gfp_t gfp_flags)
++{
++ struct jz4740_request *req;
++ struct jz4740_ep *ep;
++ struct jz4740_udc *dev;
++
++ DEBUG("%s, %p\n", __FUNCTION__, _ep);
++
++ req = container_of(_req, struct jz4740_request, req);
++ if (unlikely
++ (!_req || !_req->complete || !_req->buf
++ || !list_empty(&req->queue))) {
++ DEBUG("%s, bad params\n", __FUNCTION__);
++ return -EINVAL;
++ }
++
++ ep = container_of(_ep, struct jz4740_ep, ep);
++ if (unlikely(!_ep || (!ep->desc && ep->type != ep_control))) {
++ DEBUG("%s, bad ep\n", __FUNCTION__);
++ return -EINVAL;
++ }
++
++ dev = ep->dev;
++ if (unlikely(!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)) {
++ DEBUG("%s, bogus device state %p\n", __FUNCTION__, dev->driver);
++ return -ESHUTDOWN;
++ }
++
++ DEBUG("%s queue req %p, len %d buf %p\n", _ep->name, _req, _req->length,
++ _req->buf);
++
++ spin_lock_irqsave(&dev->lock, dev->lock_flags);
++
++ _req->status = -EINPROGRESS;
++ _req->actual = 0;
++
++ /* kickstart this i/o queue? */
++ DEBUG("Add to %d Q %d %d\n", ep_index(ep), list_empty(&ep->queue),
++ ep->stopped);
++ if (list_empty(&ep->queue) && likely(!ep->stopped)) {
++ uint32_t csr;
++
++ if (unlikely(ep_index(ep) == 0)) {
++ /* EP0 */
++ list_add_tail(&req->queue, &ep->queue);
++ jz4740_ep0_kick(dev, ep);
++ req = 0;
++ }
++ else if (ep_is_in(ep)) {
++ /* EP1 & EP2 */
++ jz_udc_select_ep(ep);
++ csr = usb_readb(dev, ep->csr);
++ pio_irq_enable(ep);
++ if (!(csr & USB_INCSR_FFNOTEMPT)) {
++ if (write_fifo(ep, req) == 1)
++ req = 0;
++ }
++ } else {
++ /* EP1 */
++ jz_udc_select_ep(ep);
++ csr = usb_readb(dev, ep->csr);
++ pio_irq_enable(ep);
++ if (csr & USB_OUTCSR_OUTPKTRDY) {
++ if (read_fifo(ep, req) == 1)
++ req = 0;
++ }
++ }
++ }
++
++ /* pio or dma irq handler advances the queue. */
++ if (likely(req != 0))
++ list_add_tail(&req->queue, &ep->queue);
++
++ spin_unlock_irqrestore(&dev->lock, dev->lock_flags);
++
++ return 0;
++}
++
++/* dequeue JUST ONE request */
++static int jz4740_dequeue(struct usb_ep *_ep, struct usb_request *_req)
++{
++ struct jz4740_ep *ep;
++ struct jz4740_request *req;
++ unsigned long flags;
++
++ DEBUG("%s, %p\n", __FUNCTION__, _ep);
++
++ ep = container_of(_ep, struct jz4740_ep, ep);
++ if (!_ep || ep->type == ep_control)
++ return -EINVAL;
++
++ spin_lock_irqsave(&ep->dev->lock, flags);
++
++ /* make sure it's actually queued on this endpoint */
++ list_for_each_entry(req, &ep->queue, queue) {
++ if (&req->req == _req)
++ break;
++ }
++ if (&req->req != _req) {
++ spin_unlock_irqrestore(&ep->dev->lock, flags);
++ return -EINVAL;
++ }
++ done(ep, req, -ECONNRESET);
++
++ spin_unlock_irqrestore(&ep->dev->lock, flags);
++ return 0;
++}
++
++/** Return bytes in EP FIFO
++ * NOTE: Sets INDEX register to EP
++ */
++static int jz4740_fifo_status(struct usb_ep *_ep)
++{
++ uint32_t csr;
++ int count = 0;
++ struct jz4740_ep *ep;
++ unsigned long flags;
++
++ ep = container_of(_ep, struct jz4740_ep, ep);
++ if (!_ep) {
++ DEBUG("%s, bad ep\n", __FUNCTION__);
++ return -ENODEV;
++ }
++
++ DEBUG("%s, %d\n", __FUNCTION__, ep_index(ep));
++
++ /* LPD can't report unclaimed bytes from IN fifos */
++ if (ep_is_in(ep))
++ return -EOPNOTSUPP;
++
++ spin_lock_irqsave(&ep->dev->lock, flags);
++ jz_udc_select_ep(ep);
++
++ csr = usb_readb(ep->dev, ep->csr);
++ if (ep->dev->gadget.speed != USB_SPEED_UNKNOWN ||
++ csr & 0x1) {
++ count = usb_readw(ep->dev, JZ_REG_UDC_OUTCOUNT);
++ }
++
++ spin_unlock_irqrestore(&ep->dev->lock, flags);
++
++ return count;
++}
++
++/** Flush EP FIFO
++ * NOTE: Sets INDEX register to EP
++ */
++static void jz4740_fifo_flush(struct usb_ep *_ep)
++{
++ struct jz4740_ep *ep;
++ unsigned long flags;
++
++ DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
++
++ ep = container_of(_ep, struct jz4740_ep, ep);
++ if (unlikely(!_ep || (!ep->desc && ep->type == ep_control))) {
++ DEBUG("%s, bad ep\n", __FUNCTION__);
++ return;
++ }
++
++ spin_lock_irqsave(&ep->dev->lock, flags);
++
++ jz_udc_select_ep(ep);
++ flush(ep);
++
++ spin_unlock_irqrestore(&ep->dev->lock, flags);
++}
++
++/****************************************************************/
++/* End Point 0 related functions */
++/****************************************************************/
++
++/* return: 0 = still running, 1 = completed, negative = errno */
++static int write_fifo_ep0(struct jz4740_ep *ep, struct jz4740_request *req)
++{
++ uint32_t max;
++ unsigned count;
++ int is_last;
++
++ DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
++ max = ep_maxpacket(ep);
++
++ count = write_packet(ep, req, max);
++
++ /* last packet is usually short (or a zlp) */
++ if (unlikely(count != max))
++ is_last = 1;
++ else {
++ if (likely(req->req.length != req->req.actual) || req->req.zero)
++ is_last = 0;
++ else
++ is_last = 1;
++ }
++
++ DEBUG_EP0("%s: wrote %s %d bytes%s %d left %p\n", __FUNCTION__,
++ ep->ep.name, count,
++ is_last ? "/L" : "", req->req.length - req->req.actual, req);
++
++ /* requests complete when all IN data is in the FIFO */
++ if (is_last) {
++ done(ep, req, 0);
++ return 1;
++ }
++
++ return 0;
++}
++
++static inline int jz4740_fifo_read(struct jz4740_ep *ep,
++ unsigned char *cp, int max)
++{
++ int bytes;
++ int count = usb_readw(ep->dev, JZ_REG_UDC_OUTCOUNT);
++
++ if (count > max)
++ count = max;
++ bytes = count;
++ while (count--)
++ *cp++ = usb_readb(ep->dev, ep->fifo);
++
++ return bytes;
++}
++
++static inline void jz4740_fifo_write(struct jz4740_ep *ep,
++ unsigned char *cp, int count)
++{
++ DEBUG("fifo_write: %d %d\n", ep_index(ep), count);
++ while (count--)
++ usb_writeb(ep->dev, ep->fifo, *cp++);
++}
++
++static int read_fifo_ep0(struct jz4740_ep *ep, struct jz4740_request *req)
++{
++ struct jz4740_udc *dev = ep->dev;
++ uint32_t csr;
++ uint8_t *buf;
++ unsigned bufferspace, count, is_short;
++
++ DEBUG_EP0("%s\n", __FUNCTION__);
++
++ csr = usb_readb(dev, JZ_REG_UDC_CSR0);
++ if (!(csr & USB_CSR0_OUTPKTRDY))
++ return 0;
++
++ buf = req->req.buf + req->req.actual;
++ prefetchw(buf);
++ bufferspace = req->req.length - req->req.actual;
++
++ /* read all bytes from this packet */
++ if (likely(csr & USB_CSR0_OUTPKTRDY)) {
++ count = usb_readw(dev, JZ_REG_UDC_OUTCOUNT);
++ req->req.actual += min(count, bufferspace);
++ } else /* zlp */
++ count = 0;
++
++ is_short = (count < ep->ep.maxpacket);
++ DEBUG_EP0("read %s %02x, %d bytes%s req %p %d/%d\n",
++ ep->ep.name, csr, count,
++ is_short ? "/S" : "", req, req->req.actual, req->req.length);
++
++ while (likely(count-- != 0)) {
++ uint8_t byte = (uint8_t)usb_readl(dev, ep->fifo);
++
++ if (unlikely(bufferspace == 0)) {
++ /* this happens when the driver's buffer
++ * is smaller than what the host sent.
++ * discard the extra data.
++ */
++ if (req->req.status != -EOVERFLOW)
++ DEBUG_EP0("%s overflow %d\n", ep->ep.name,
++ count);
++ req->req.status = -EOVERFLOW;
++ } else {
++ *buf++ = byte;
++ bufferspace--;
++ }
++ }
++
++ /* completion */
++ if (is_short || req->req.actual == req->req.length) {
++ done(ep, req, 0);
++ return 1;
++ }
++
++ /* finished that packet. the next one may be waiting... */
++ return 0;
++}
++
++/**
++ * udc_set_address - set the USB address for this device
++ * @address:
++ *
++ * Called from control endpoint function after it decodes a set address setup packet.
++ */
++static void udc_set_address(struct jz4740_udc *dev, unsigned char address)
++{
++ DEBUG_EP0("%s: %d\n", __FUNCTION__, address);
++
++ usb_writeb(dev, JZ_REG_UDC_FADDR, address);
++}
++
++/*
++ * DATA_STATE_RECV (USB_CSR0_OUTPKTRDY)
++ * - if error
++ * set USB_CSR0_SVDOUTPKTRDY | USB_CSR0_DATAEND | USB_CSR0_SENDSTALL bits
++ * - else
++ * set USB_CSR0_SVDOUTPKTRDY bit
++ if last set USB_CSR0_DATAEND bit
++ */
++static void jz4740_ep0_out(struct jz4740_udc *dev, uint32_t csr, int kickstart)
++{
++ struct jz4740_request *req;
++ struct jz4740_ep *ep = &dev->ep[0];
++ int ret;
++
++ DEBUG_EP0("%s: %x\n", __FUNCTION__, csr);
++
++ if (list_empty(&ep->queue))
++ req = 0;
++ else
++ req = list_entry(ep->queue.next, struct jz4740_request, queue);
++
++ if (req) {
++ if (req->req.length == 0) {
++ DEBUG_EP0("ZERO LENGTH OUT!\n");
++ usb_setb(dev, JZ_REG_UDC_CSR0, (USB_CSR0_SVDOUTPKTRDY | USB_CSR0_DATAEND));
++ dev->ep0state = WAIT_FOR_SETUP;
++ return;
++ } else if (kickstart) {
++ usb_setb(dev, JZ_REG_UDC_CSR0, (USB_CSR0_SVDOUTPKTRDY));
++ return;
++ }
++ ret = read_fifo_ep0(ep, req);
++ if (ret) {
++ /* Done! */
++ DEBUG_EP0("%s: finished, waiting for status\n",
++ __FUNCTION__);
++ usb_setb(dev, JZ_REG_UDC_CSR0, (USB_CSR0_SVDOUTPKTRDY | USB_CSR0_DATAEND));
++ dev->ep0state = WAIT_FOR_SETUP;
++ } else {
++ /* Not done yet.. */
++ DEBUG_EP0("%s: not finished\n", __FUNCTION__);
++ usb_setb(dev, JZ_REG_UDC_CSR0, USB_CSR0_SVDOUTPKTRDY);
++ }
++ } else {
++ DEBUG_EP0("NO REQ??!\n");
++ }
++}
++
++/*
++ * DATA_STATE_XMIT
++ */
++static int jz4740_ep0_in(struct jz4740_udc *dev, uint32_t csr)
++{
++ struct jz4740_request *req;
++ struct jz4740_ep *ep = &dev->ep[0];
++ int ret, need_zlp = 0;
++
++ DEBUG_EP0("%s: %x\n", __FUNCTION__, csr);
++
++ if (list_empty(&ep->queue))
++ req = 0;
++ else
++ req = list_entry(ep->queue.next, struct jz4740_request, queue);
++
++ if (!req) {
++ DEBUG_EP0("%s: NULL REQ\n", __FUNCTION__);
++ return 0;
++ }
++
++ if (req->req.length == 0) {
++ usb_setb(dev, JZ_REG_UDC_CSR0, (USB_CSR0_INPKTRDY | USB_CSR0_DATAEND));
++ dev->ep0state = WAIT_FOR_SETUP;
++ return 1;
++ }
++
++ if (req->req.length - req->req.actual == EP0_MAXPACKETSIZE) {
++ /* Next write will end with the packet size, */
++ /* so we need zero-length-packet */
++ need_zlp = 1;
++ }
++
++ ret = write_fifo_ep0(ep, req);
++
++ if (ret == 1 && !need_zlp) {
++ /* Last packet */
++ DEBUG_EP0("%s: finished, waiting for status\n", __FUNCTION__);
++
++ usb_setb(dev, JZ_REG_UDC_CSR0, (USB_CSR0_INPKTRDY | USB_CSR0_DATAEND));
++ dev->ep0state = WAIT_FOR_SETUP;
++ } else {
++ DEBUG_EP0("%s: not finished\n", __FUNCTION__);
++ usb_setb(dev, JZ_REG_UDC_CSR0, USB_CSR0_INPKTRDY);
++ }
++
++ if (need_zlp) {
++ DEBUG_EP0("%s: Need ZLP!\n", __FUNCTION__);
++ usb_setb(dev, JZ_REG_UDC_CSR0, USB_CSR0_INPKTRDY);
++ dev->ep0state = DATA_STATE_NEED_ZLP;
++ }
++
++ return 1;
++}
++
++static int jz4740_handle_get_status(struct jz4740_udc *dev,
++ struct usb_ctrlrequest *ctrl)
++{
++ struct jz4740_ep *ep0 = &dev->ep[0];
++ struct jz4740_ep *qep;
++ int reqtype = (ctrl->bRequestType & USB_RECIP_MASK);
++ uint16_t val = 0;
++
++ DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
++
++ if (reqtype == USB_RECIP_INTERFACE) {
++ /* This is not supported.
++ * And according to the USB spec, this one does nothing..
++ * Just return 0
++ */
++ DEBUG_SETUP("GET_STATUS: USB_RECIP_INTERFACE\n");
++ } else if (reqtype == USB_RECIP_DEVICE) {
++ DEBUG_SETUP("GET_STATUS: USB_RECIP_DEVICE\n");
++ val |= (1 << 0); /* Self powered */
++ /*val |= (1<<1); *//* Remote wakeup */
++ } else if (reqtype == USB_RECIP_ENDPOINT) {
++ int ep_num = (ctrl->wIndex & ~USB_DIR_IN);
++
++ DEBUG_SETUP
++ ("GET_STATUS: USB_RECIP_ENDPOINT (%d), ctrl->wLength = %d\n",
++ ep_num, ctrl->wLength);
++
++ if (ctrl->wLength > 2 || ep_num > 3)
++ return -EOPNOTSUPP;
++
++ qep = &dev->ep[ep_num];
++ if (ep_is_in(qep) != ((ctrl->wIndex & USB_DIR_IN) ? 1 : 0)
++ && ep_index(qep) != 0) {
++ return -EOPNOTSUPP;
++ }
++
++ jz_udc_select_ep(qep);
++
++ /* Return status on next IN token */
++ switch (qep->type) {
++ case ep_control:
++ val =
++ (usb_readb(dev, qep->csr) & USB_CSR0_SENDSTALL) ==
++ USB_CSR0_SENDSTALL;
++ break;
++ case ep_bulk_in:
++ case ep_interrupt:
++ val =
++ (usb_readb(dev, qep->csr) & USB_INCSR_SENDSTALL) ==
++ USB_INCSR_SENDSTALL;
++ break;
++ case ep_bulk_out:
++ val =
++ (usb_readb(dev, qep->csr) & USB_OUTCSR_SENDSTALL) ==
++ USB_OUTCSR_SENDSTALL;
++ break;
++ }
++
++ /* Back to EP0 index */
++ jz_udc_set_index(dev, 0);
++
++ DEBUG_SETUP("GET_STATUS, ep: %d (%x), val = %d\n", ep_num,
++ ctrl->wIndex, val);
++ } else {
++ DEBUG_SETUP("Unknown REQ TYPE: %d\n", reqtype);
++ return -EOPNOTSUPP;
++ }
++
++ /* Clear "out packet ready" */
++ usb_setb(dev, JZ_REG_UDC_CSR0, USB_CSR0_SVDOUTPKTRDY);
++ /* Put status to FIFO */
++ jz4740_fifo_write(ep0, (uint8_t *)&val, sizeof(val));
++ /* Issue "In packet ready" */
++ usb_setb(dev, JZ_REG_UDC_CSR0, (USB_CSR0_INPKTRDY | USB_CSR0_DATAEND));
++
++ return 0;
++}
++
++/*
++ * WAIT_FOR_SETUP (OUTPKTRDY)
++ * - read data packet from EP0 FIFO
++ * - decode command
++ * - if error
++ * set USB_CSR0_SVDOUTPKTRDY | USB_CSR0_DATAEND | USB_CSR0_SENDSTALL bits
++ * - else
++ * set USB_CSR0_SVDOUTPKTRDY | USB_CSR0_DATAEND bits
++ */
++static void jz4740_ep0_setup(struct jz4740_udc *dev, uint32_t csr)
++{
++ struct jz4740_ep *ep = &dev->ep[0];
++ struct usb_ctrlrequest ctrl;
++ int i;
++
++ DEBUG_SETUP("%s: %x\n", __FUNCTION__, csr);
++
++ /* Nuke all previous transfers */
++ nuke(ep, -EPROTO);
++
++ /* read control req from fifo (8 bytes) */
++ jz4740_fifo_read(ep, (unsigned char *)&ctrl, 8);
++
++ DEBUG_SETUP("SETUP %02x.%02x v%04x i%04x l%04x\n",
++ ctrl.bRequestType, ctrl.bRequest,
++ ctrl.wValue, ctrl.wIndex, ctrl.wLength);
++
++ /* Set direction of EP0 */
++ if (likely(ctrl.bRequestType & USB_DIR_IN)) {
++ ep->bEndpointAddress |= USB_DIR_IN;
++ } else {
++ ep->bEndpointAddress &= ~USB_DIR_IN;
++ }
++
++ /* Handle some SETUP packets ourselves */
++ switch (ctrl.bRequest) {
++ case USB_REQ_SET_ADDRESS:
++ if (ctrl.bRequestType != (USB_TYPE_STANDARD | USB_RECIP_DEVICE))
++ break;
++
++ DEBUG_SETUP("USB_REQ_SET_ADDRESS (%d)\n", ctrl.wValue);
++ udc_set_address(dev, ctrl.wValue);
++ usb_setb(dev, JZ_REG_UDC_CSR0, (USB_CSR0_SVDOUTPKTRDY | USB_CSR0_DATAEND));
++ return;
++
++ case USB_REQ_SET_CONFIGURATION:
++ if (ctrl.bRequestType != (USB_TYPE_STANDARD | USB_RECIP_DEVICE))
++ break;
++
++ DEBUG_SETUP("USB_REQ_SET_CONFIGURATION (%d)\n", ctrl.wValue);
++/* usb_setb(JZ_REG_UDC_CSR0, (USB_CSR0_SVDOUTPKTRDY | USB_CSR0_DATAEND));*/
++
++ /* Enable RESUME and SUSPEND interrupts */
++ usb_setb(dev, JZ_REG_UDC_INTRUSBE, (USB_INTR_RESUME | USB_INTR_SUSPEND));
++ break;
++
++ case USB_REQ_SET_INTERFACE:
++ if (ctrl.bRequestType != (USB_TYPE_STANDARD | USB_RECIP_DEVICE))
++ break;
++
++ DEBUG_SETUP("USB_REQ_SET_INTERFACE (%d)\n", ctrl.wValue);
++/* usb_setb(JZ_REG_UDC_CSR0, (USB_CSR0_SVDOUTPKTRDY | USB_CSR0_DATAEND));*/
++ break;
++
++ case USB_REQ_GET_STATUS:
++ if (jz4740_handle_get_status(dev, &ctrl) == 0)
++ return;
++
++ case USB_REQ_CLEAR_FEATURE:
++ case USB_REQ_SET_FEATURE:
++ if (ctrl.bRequestType == USB_RECIP_ENDPOINT) {
++ struct jz4740_ep *qep;
++ int ep_num = (ctrl.wIndex & 0x0f);
++
++ /* Support only HALT feature */
++ if (ctrl.wValue != 0 || ctrl.wLength != 0
++ || ep_num > 3 || ep_num < 1)
++ break;
++
++ qep = &dev->ep[ep_num];
++ spin_unlock(&dev->lock);
++ if (ctrl.bRequest == USB_REQ_SET_FEATURE) {
++ DEBUG_SETUP("SET_FEATURE (%d)\n",
++ ep_num);
++ jz4740_set_halt(&qep->ep, 1);
++ } else {
++ DEBUG_SETUP("CLR_FEATURE (%d)\n",
++ ep_num);
++ jz4740_set_halt(&qep->ep, 0);
++ }
++ spin_lock(&dev->lock);
++
++ jz_udc_set_index(dev, 0);
++
++ /* Reply with a ZLP on next IN token */
++ usb_setb(dev, JZ_REG_UDC_CSR0,
++ (USB_CSR0_SVDOUTPKTRDY | USB_CSR0_DATAEND));
++ return;
++ }
++ break;
++
++ default:
++ break;
++ }
++
++ /* gadget drivers see class/vendor specific requests,
++ * {SET,GET}_{INTERFACE,DESCRIPTOR,CONFIGURATION},
++ * and more.
++ */
++ if (dev->driver) {
++ /* device-2-host (IN) or no data setup command, process immediately */
++ spin_unlock(&dev->lock);
++
++ i = dev->driver->setup(&dev->gadget, &ctrl);
++ spin_lock(&dev->lock);
++
++ if (unlikely(i < 0)) {
++ /* setup processing failed, force stall */
++ DEBUG_SETUP
++ (" --> ERROR: gadget setup FAILED (stalling), setup returned %d\n",
++ i);
++ jz_udc_set_index(dev, 0);
++ usb_setb(dev, JZ_REG_UDC_CSR0, (USB_CSR0_SVDOUTPKTRDY | USB_CSR0_DATAEND | USB_CSR0_SENDSTALL));
++
++ /* ep->stopped = 1; */
++ dev->ep0state = WAIT_FOR_SETUP;
++ }
++ else {
++ DEBUG_SETUP("gadget driver setup ok (%d)\n", ctrl.wLength);
++/* if (!ctrl.wLength) {
++ usb_setb(JZ_REG_UDC_CSR0, USB_CSR0_SVDOUTPKTRDY);
++ }*/
++ }
++ }
++}
++
++/*
++ * DATA_STATE_NEED_ZLP
++ */
++static void jz4740_ep0_in_zlp(struct jz4740_udc *dev, uint32_t csr)
++{
++ DEBUG_EP0("%s: %x\n", __FUNCTION__, csr);
++
++ usb_setb(dev, JZ_REG_UDC_CSR0, (USB_CSR0_INPKTRDY | USB_CSR0_DATAEND));
++ dev->ep0state = WAIT_FOR_SETUP;
++}
++
++/*
++ * handle ep0 interrupt
++ */
++static void jz4740_handle_ep0(struct jz4740_udc *dev, uint32_t intr)
++{
++ struct jz4740_ep *ep = &dev->ep[0];
++ uint32_t csr;
++
++ DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
++ /* Set index 0 */
++ jz_udc_set_index(dev, 0);
++ csr = usb_readb(dev, JZ_REG_UDC_CSR0);
++
++ DEBUG_EP0("%s: csr = %x state = \n", __FUNCTION__, csr);//, state_names[dev->ep0state]);
++
++ /*
++ * if SENT_STALL is set
++ * - clear the SENT_STALL bit
++ */
++ if (csr & USB_CSR0_SENTSTALL) {
++ DEBUG_EP0("%s: USB_CSR0_SENTSTALL is set: %x\n", __FUNCTION__, csr);
++ usb_clearb(dev, JZ_REG_UDC_CSR0, USB_CSR0_SENDSTALL | USB_CSR0_SENTSTALL);
++ nuke(ep, -ECONNABORTED);
++ dev->ep0state = WAIT_FOR_SETUP;
++ return;
++ }
++
++ /*
++ * if a transfer is in progress && INPKTRDY and OUTPKTRDY are clear
++ * - fill EP0 FIFO
++ * - if last packet
++ * - set IN_PKT_RDY | DATA_END
++ * - else
++ * set IN_PKT_RDY
++ */
++ if (!(csr & (USB_CSR0_INPKTRDY | USB_CSR0_OUTPKTRDY))) {
++ DEBUG_EP0("%s: INPKTRDY and OUTPKTRDY are clear\n",
++ __FUNCTION__);
++
++ switch (dev->ep0state) {
++ case DATA_STATE_XMIT:
++ DEBUG_EP0("continue with DATA_STATE_XMIT\n");
++ jz4740_ep0_in(dev, csr);
++ return;
++ case DATA_STATE_NEED_ZLP:
++ DEBUG_EP0("continue with DATA_STATE_NEED_ZLP\n");
++ jz4740_ep0_in_zlp(dev, csr);
++ return;
++ default:
++ /* Stall? */
++// DEBUG_EP0("Odd state!! state = %s\n",
++// state_names[dev->ep0state]);
++ dev->ep0state = WAIT_FOR_SETUP;
++ /* nuke(ep, 0); */
++ /* usb_setb(ep->csr, USB_CSR0_SENDSTALL); */
++// break;
++ return;
++ }
++ }
++
++ /*
++ * if SETUPEND is set
++ * - abort the last transfer
++ * - set SERVICED_SETUP_END_BIT
++ */
++ if (csr & USB_CSR0_SETUPEND) {
++ DEBUG_EP0("%s: USB_CSR0_SETUPEND is set: %x\n", __FUNCTION__, csr);
++
++ usb_setb(dev, JZ_REG_UDC_CSR0, USB_CSR0_SVDSETUPEND);
++ nuke(ep, 0);
++ dev->ep0state = WAIT_FOR_SETUP;
++ }
++
++ /*
++ * if USB_CSR0_OUTPKTRDY is set
++ * - read data packet from EP0 FIFO
++ * - decode command
++ * - if error
++ * set SVDOUTPKTRDY | DATAEND | SENDSTALL bits
++ * - else
++ * set SVDOUTPKTRDY | DATAEND bits
++ */
++ if (csr & USB_CSR0_OUTPKTRDY) {
++
++ DEBUG_EP0("%s: EP0_OUT_PKT_RDY is set: %x\n", __FUNCTION__,
++ csr);
++
++ switch (dev->ep0state) {
++ case WAIT_FOR_SETUP:
++ DEBUG_EP0("WAIT_FOR_SETUP\n");
++ jz4740_ep0_setup(dev, csr);
++ break;
++
++ case DATA_STATE_RECV:
++ DEBUG_EP0("DATA_STATE_RECV\n");
++ jz4740_ep0_out(dev, csr, 0);
++ break;
++
++ default:
++ /* send stall? */
++ DEBUG_EP0("strange state!! 2. send stall? state = %d\n",
++ dev->ep0state);
++ break;
++ }
++ }
++}
++
++static void jz4740_ep0_kick(struct jz4740_udc *dev, struct jz4740_ep *ep)
++{
++ uint32_t csr;
++
++ jz_udc_set_index(dev, 0);
++
++ DEBUG_EP0("%s: %x\n", __FUNCTION__, csr);
++
++ /* Clear "out packet ready" */
++
++ if (ep_is_in(ep)) {
++ usb_setb(dev, JZ_REG_UDC_CSR0, USB_CSR0_SVDOUTPKTRDY);
++ csr = usb_readb(dev, JZ_REG_UDC_CSR0);
++ dev->ep0state = DATA_STATE_XMIT;
++ jz4740_ep0_in(dev, csr);
++ } else {
++ csr = usb_readb(dev, JZ_REG_UDC_CSR0);
++ dev->ep0state = DATA_STATE_RECV;
++ jz4740_ep0_out(dev, csr, 1);
++ }
++}
++
++/** Handle USB RESET interrupt
++ */
++static void jz4740_reset_irq(struct jz4740_udc *dev)
++{
++ dev->gadget.speed = (usb_readb(dev, JZ_REG_UDC_POWER) & USB_POWER_HSMODE) ?
++ USB_SPEED_HIGH : USB_SPEED_FULL;
++
++ DEBUG_SETUP("%s: address = %d, speed = %s\n", __FUNCTION__, 0,
++ (dev->gadget.speed == USB_SPEED_HIGH) ? "HIGH":"FULL" );
++}
++
++/*
++ * jz4740 usb device interrupt handler.
++ */
++static irqreturn_t jz4740_udc_irq(int irq, void *devid)
++{
++ struct jz4740_udc *jz4740_udc = devid;
++ uint8_t index;
++
++ uint32_t intr_usb = usb_readb(jz4740_udc, JZ_REG_UDC_INTRUSB) & 0x7; /* mask SOF */
++ uint32_t intr_in = usb_readw(jz4740_udc, JZ_REG_UDC_INTRIN);
++ uint32_t intr_out = usb_readw(jz4740_udc, JZ_REG_UDC_INTROUT);
++ uint32_t intr_dma = usb_readb(jz4740_udc, JZ_REG_UDC_INTR);
++
++ if (!intr_usb && !intr_in && !intr_out && !intr_dma)
++ return IRQ_HANDLED;
++
++
++ DEBUG("intr_out=%x intr_in=%x intr_usb=%x\n",
++ intr_out, intr_in, intr_usb);
++
++ spin_lock(&jz4740_udc->lock);
++ index = usb_readb(jz4740_udc, JZ_REG_UDC_INDEX);
++
++ /* Check for resume from suspend mode */
++ if ((intr_usb & USB_INTR_RESUME) &&
++ (usb_readb(jz4740_udc, JZ_REG_UDC_INTRUSBE) & USB_INTR_RESUME)) {
++ DEBUG("USB resume\n");
++ jz4740_udc->driver->resume(&jz4740_udc->gadget); /* We have suspend(), so we must have resume() too. */
++ }
++
++ /* Check for system interrupts */
++ if (intr_usb & USB_INTR_RESET) {
++ DEBUG("USB reset\n");
++ jz4740_reset_irq(jz4740_udc);
++ }
++
++ /* Check for endpoint 0 interrupt */
++ if (intr_in & USB_INTR_EP0) {
++ DEBUG("USB_INTR_EP0 (control)\n");
++ jz4740_handle_ep0(jz4740_udc, intr_in);
++ }
++
++ /* Check for Bulk-IN DMA interrupt */
++ if (intr_dma & 0x1) {
++ int ep_num;
++ struct jz4740_ep *ep;
++ ep_num = (usb_readl(jz4740_udc, JZ_REG_UDC_CNTL1) >> 4) & 0xf;
++ ep = &jz4740_udc->ep[ep_num + 1];
++ jz_udc_select_ep(ep);
++ usb_setb(jz4740_udc, ep->csr, USB_INCSR_INPKTRDY);
++/* jz4740_in_epn(jz4740_udc, ep_num, intr_in);*/
++ }
++
++ /* Check for Bulk-OUT DMA interrupt */
++ if (intr_dma & 0x2) {
++ int ep_num;
++ ep_num = (usb_readl(jz4740_udc, JZ_REG_UDC_CNTL2) >> 4) & 0xf;
++ jz4740_out_epn(jz4740_udc, ep_num, intr_out);
++ }
++
++ /* Check for each configured endpoint interrupt */
++ if (intr_in & USB_INTR_INEP1) {
++ DEBUG("USB_INTR_INEP1\n");
++ jz4740_in_epn(jz4740_udc, 1, intr_in);
++ }
++
++ if (intr_in & USB_INTR_INEP2) {
++ DEBUG("USB_INTR_INEP2\n");
++ jz4740_in_epn(jz4740_udc, 2, intr_in);
++ }
++
++ if (intr_out & USB_INTR_OUTEP1) {
++ DEBUG("USB_INTR_OUTEP1\n");
++ jz4740_out_epn(jz4740_udc, 1, intr_out);
++ }
++
++ /* Check for suspend mode */
++ if ((intr_usb & USB_INTR_SUSPEND) &&
++ (usb_readb(jz4740_udc, JZ_REG_UDC_INTRUSBE) & USB_INTR_SUSPEND)) {
++ DEBUG("USB suspend\n");
++ jz4740_udc->driver->suspend(&jz4740_udc->gadget);
++ /* Host unloaded from us, can do something, such as flushing
++ the NAND block cache etc. */
++ }
++
++ jz_udc_set_index(jz4740_udc, index);
++
++ spin_unlock(&jz4740_udc->lock);
++
++ return IRQ_HANDLED;
++}
++
++
++
++/*-------------------------------------------------------------------------*/
++
++
++static inline struct jz4740_udc *gadget_to_udc(struct usb_gadget *gadget)
++{
++ return container_of(gadget, struct jz4740_udc, gadget);
++}
++
++static int jz4740_udc_get_frame(struct usb_gadget *_gadget)
++{
++ DEBUG("%s, %p\n", __FUNCTION__, _gadget);
++ return usb_readw(gadget_to_udc(_gadget), JZ_REG_UDC_FRAME);
++}
++
++static int jz4740_udc_wakeup(struct usb_gadget *_gadget)
++{
++ /* host may not have enabled remote wakeup */
++ /*if ((UDCCS0 & UDCCS0_DRWF) == 0)
++ return -EHOSTUNREACH;
++ udc_set_mask_UDCCR(UDCCR_RSM); */
++ return -ENOTSUPP;
++}
++
++static int jz4740_udc_pullup(struct usb_gadget *_gadget, int on)
++{
++ struct jz4740_udc *udc = gadget_to_udc(_gadget);
++ unsigned long flags;
++
++ local_irq_save(flags);
++
++ if (on) {
++ udc->state = UDC_STATE_ENABLE;
++ udc_enable(udc);
++ } else {
++ udc->state = UDC_STATE_DISABLE;
++ udc_disable(udc);
++ }
++
++ local_irq_restore(flags);
++
++ return 0;
++}
++
++static const struct usb_gadget_ops jz4740_udc_ops = {
++ .get_frame = jz4740_udc_get_frame,
++ .wakeup = jz4740_udc_wakeup,
++ .pullup = jz4740_udc_pullup,
++ .udc_start = jz4740_udc_start,
++ .udc_stop = jz4740_udc_stop,
++};
++
++static struct usb_ep_ops jz4740_ep_ops = {
++ .enable = jz4740_ep_enable,
++ .disable = jz4740_ep_disable,
++
++ .alloc_request = jz4740_alloc_request,
++ .free_request = jz4740_free_request,
++
++ .queue = jz4740_queue,
++ .dequeue = jz4740_dequeue,
++
++ .set_halt = jz4740_set_halt,
++ .fifo_status = jz4740_fifo_status,
++ .fifo_flush = jz4740_fifo_flush,
++};
++
++
++/*-------------------------------------------------------------------------*/
++
++static struct jz4740_udc jz4740_udc_controller = {
++ .gadget = {
++ .ops = &jz4740_udc_ops,
++ .ep0 = &jz4740_udc_controller.ep[0].ep,
++ .max_speed = USB_SPEED_HIGH,
++ .name = "jz4740-udc",
++ .dev = {
++ .init_name = "gadget",
++ },
++ },
++
++ /* control endpoint */
++ .ep[0] = {
++ .ep = {
++ .name = "ep0",
++ .ops = &jz4740_ep_ops,
++ .maxpacket = EP0_MAXPACKETSIZE,
++ },
++ .dev = &jz4740_udc_controller,
++
++ .bEndpointAddress = 0,
++ .bmAttributes = 0,
++
++ .type = ep_control,
++ .fifo = JZ_REG_UDC_EP_FIFO(0),
++ .csr = JZ_REG_UDC_CSR0,
++ },
++
++ /* bulk out endpoint */
++ .ep[1] = {
++ .ep = {
++ .name = "ep1out-bulk",
++ .ops = &jz4740_ep_ops,
++ .maxpacket = EPBULK_MAXPACKETSIZE,
++ },
++ .dev = &jz4740_udc_controller,
++
++ .bEndpointAddress = 1,
++ .bmAttributes = USB_ENDPOINT_XFER_BULK,
++
++ .type = ep_bulk_out,
++ .fifo = JZ_REG_UDC_EP_FIFO(1),
++ .csr = JZ_REG_UDC_OUTCSR,
++ },
++
++ /* bulk in endpoint */
++ .ep[2] = {
++ .ep = {
++ .name = "ep1in-bulk",
++ .ops = &jz4740_ep_ops,
++ .maxpacket = EPBULK_MAXPACKETSIZE,
++ },
++ .dev = &jz4740_udc_controller,
++
++ .bEndpointAddress = 1 | USB_DIR_IN,
++ .bmAttributes = USB_ENDPOINT_XFER_BULK,
++
++ .type = ep_bulk_in,
++ .fifo = JZ_REG_UDC_EP_FIFO(1),
++ .csr = JZ_REG_UDC_INCSR,
++ },
++
++ /* interrupt in endpoint */
++ .ep[3] = {
++ .ep = {
++ .name = "ep2in-int",
++ .ops = &jz4740_ep_ops,
++ .maxpacket = EPINTR_MAXPACKETSIZE,
++ },
++ .dev = &jz4740_udc_controller,
++
++ .bEndpointAddress = 2 | USB_DIR_IN,
++ .bmAttributes = USB_ENDPOINT_XFER_INT,
++
++ .type = ep_interrupt,
++ .fifo = JZ_REG_UDC_EP_FIFO(2),
++ .csr = JZ_REG_UDC_INCSR,
++ },
++};
++
++static int jz4740_udc_probe(struct platform_device *pdev)
++{
++ struct jz4740_udc *jz4740_udc = &jz4740_udc_controller;
++ int ret;
++
++ spin_lock_init(&jz4740_udc->lock);
++
++ jz4740_udc->dev = &pdev->dev;
++
++ jz4740_udc->clk = clk_get(&pdev->dev, "udc");
++ if (IS_ERR(jz4740_udc->clk)) {
++ ret = PTR_ERR(jz4740_udc->clk);
++ dev_err(&pdev->dev, "Failed to get udc clock: %d\n", ret);
++ return ret;
++ }
++
++ platform_set_drvdata(pdev, jz4740_udc);
++
++ jz4740_udc->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++
++ if (!jz4740_udc->mem) {
++ ret = -ENOENT;
++ dev_err(&pdev->dev, "Failed to get mmio memory resource\n");
++ goto err_clk_put;
++ }
++
++ jz4740_udc->mem = request_mem_region(jz4740_udc->mem->start,
++ resource_size(jz4740_udc->mem), pdev->name);
++
++ if (!jz4740_udc->mem) {
++ ret = -EBUSY;
++ dev_err(&pdev->dev, "Failed to request mmio memory region\n");
++ goto err_clk_put;
++ }
++
++ jz4740_udc->base = ioremap(jz4740_udc->mem->start, resource_size(jz4740_udc->mem));
++
++ if (!jz4740_udc->base) {
++ ret = -EBUSY;
++ dev_err(&pdev->dev, "Failed to ioremap mmio memory\n");
++ goto err_release_mem_region;
++ }
++
++ jz4740_udc->irq = platform_get_irq(pdev, 0);
++ ret = request_irq(jz4740_udc->irq, jz4740_udc_irq, 0, pdev->name,
++ jz4740_udc);
++ if (ret) {
++ dev_err(&pdev->dev, "Failed to request irq: %d\n", ret);
++ goto err_iounmap;
++ }
++
++ ret = usb_add_gadget_udc(&pdev->dev, &jz4740_udc->gadget);
++ if (ret) {
++ dev_err(&pdev->dev, "Failed to add gadget: %d\n", ret);
++ goto err_free_irq;
++ }
++
++/* udc_disable(jz4740_udc);*/
++ udc_reinit(jz4740_udc);
++
++ return 0;
++
++err_free_irq:
++ free_irq(jz4740_udc->irq, pdev);
++err_iounmap:
++ iounmap(jz4740_udc->base);
++err_release_mem_region:
++ release_mem_region(jz4740_udc->mem->start, resource_size(jz4740_udc->mem));
++err_clk_put:
++ clk_put(jz4740_udc->clk);
++
++ return ret;
++}
++
++static int jz4740_udc_remove(struct platform_device *pdev)
++{
++ struct jz4740_udc *dev = platform_get_drvdata(pdev);
++
++ usb_del_gadget_udc(&dev->gadget);
++ if (dev->driver)
++ return -EBUSY;
++
++ udc_disable(dev);
++
++ free_irq(dev->irq, dev);
++ iounmap(dev->base);
++ release_mem_region(dev->mem->start, resource_size(dev->mem));
++ clk_put(dev->clk);
++
++ return 0;
++}
++
++#ifdef CONFIG_PM
++
++static int jz4740_udc_suspend(struct device *dev)
++{
++ struct jz4740_udc *jz4740_udc = dev_get_drvdata(dev);
++
++ if (jz4740_udc->state == UDC_STATE_ENABLE)
++ udc_disable(jz4740_udc);
++
++ return 0;
++}
++
++static int jz4740_udc_resume(struct device *dev)
++{
++ struct jz4740_udc *jz4740_udc = dev_get_drvdata(dev);
++
++ if (jz4740_udc->state == UDC_STATE_ENABLE)
++ udc_enable(jz4740_udc);
++
++ return 0;
++}
++
++static SIMPLE_DEV_PM_OPS(jz4740_udc_pm_ops, jz4740_udc_suspend, jz4740_udc_resume);
++#define JZ4740_UDC_PM_OPS (&jz4740_udc_pm_ops)
++
++#else
++#define JZ4740_UDC_PM_OPS NULL
++#endif
++
++static struct platform_driver udc_driver = {
++ .probe = jz4740_udc_probe,
++ .remove = jz4740_udc_remove,
++ .driver = {
++ .name = "jz-udc",
++ .owner = THIS_MODULE,
++ .pm = JZ4740_UDC_PM_OPS,
++ },
++};
++
++/*-------------------------------------------------------------------------*/
++
++static int __init udc_init (void)
++{
++ return platform_driver_register(&udc_driver);
++}
++module_init(udc_init);
++
++static void __exit udc_exit (void)
++{
++ platform_driver_unregister(&udc_driver);
++}
++module_exit(udc_exit);
++
++MODULE_DESCRIPTION("JZ4740 USB Device Controller");
++MODULE_AUTHOR("Wei Jianli <jlwei@ingenic.cn>");
++MODULE_LICENSE("GPL");
+diff --git a/drivers/usb/gadget/jz4740_udc.h b/drivers/usb/gadget/jz4740_udc.h
+new file mode 100644
+index 0000000..53fd1da
+--- /dev/null
++++ b/drivers/usb/gadget/jz4740_udc.h
+@@ -0,0 +1,101 @@
++/*
++ * linux/drivers/usb/gadget/jz4740_udc.h
++ *
++ * Ingenic JZ4740 on-chip high speed USB device controller
++ *
++ * Copyright (C) 2006 Ingenic Semiconductor Inc.
++ * Author: <jlwei@ingenic.cn>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#ifndef __USB_GADGET_JZ4740_H__
++#define __USB_GADGET_JZ4740_H__
++
++/*-------------------------------------------------------------------------*/
++
++// Max packet size
++#define EP0_MAXPACKETSIZE 64
++#define EPBULK_MAXPACKETSIZE 512
++#define EPINTR_MAXPACKETSIZE 64
++
++#define UDC_MAX_ENDPOINTS 4
++
++/*-------------------------------------------------------------------------*/
++
++enum ep_type {
++ ep_control, ep_bulk_in, ep_bulk_out, ep_interrupt
++};
++
++struct jz4740_ep {
++ struct usb_ep ep;
++ struct jz4740_udc *dev;
++
++ const struct usb_endpoint_descriptor *desc;
++
++ uint8_t stopped;
++ uint8_t bEndpointAddress;
++ uint8_t bmAttributes;
++
++ enum ep_type type;
++ size_t fifo;
++ uint32_t csr;
++
++ uint32_t reg_addr;
++ struct list_head queue;
++};
++
++struct jz4740_request {
++ struct usb_request req;
++ struct list_head queue;
++};
++
++enum ep0state {
++ WAIT_FOR_SETUP, /* between STATUS ack and SETUP report */
++ DATA_STATE_XMIT, /* data tx stage */
++ DATA_STATE_NEED_ZLP, /* data tx zlp stage */
++ WAIT_FOR_OUT_STATUS, /* status stages */
++ DATA_STATE_RECV, /* data rx stage */
++};
++
++/* For function binding with UDC Disable - Added by River */
++typedef enum {
++ UDC_STATE_ENABLE = 0,
++ UDC_STATE_DISABLE,
++}udc_state_t;
++
++struct jz4740_udc {
++ struct usb_gadget gadget;
++ struct usb_gadget_driver *driver;
++ struct device *dev;
++ spinlock_t lock;
++ unsigned long lock_flags;
++
++ enum ep0state ep0state;
++ struct jz4740_ep ep[UDC_MAX_ENDPOINTS];
++
++ udc_state_t state;
++
++ struct resource *mem;
++ void __iomem *base;
++ int irq;
++
++ struct clk *clk;
++};
++
++#define ep_maxpacket(EP) ((EP)->ep.maxpacket)
++
++static inline bool ep_is_in(const struct jz4740_ep *ep)
++{
++ return (ep->bEndpointAddress & USB_DIR_IN) == USB_DIR_IN;
++}
++
++static inline uint8_t ep_index(const struct jz4740_ep *ep)
++{
++ return ep->bEndpointAddress & 0xf;
++}
++
++#endif /* __USB_GADGET_JZ4740_H__ */
+--
+1.7.10.4
+
diff --git a/target/linux/xburst/patches-3.10/009-Add-ili8960-lcd-driver.patch b/target/linux/xburst/patches-3.10/009-Add-ili8960-lcd-driver.patch
new file mode 100644
index 0000000000..3984ffeb48
--- /dev/null
+++ b/target/linux/xburst/patches-3.10/009-Add-ili8960-lcd-driver.patch
@@ -0,0 +1,314 @@
+From ee3a5c779be4d1d270388203cd1c6a734a0bf4ed Mon Sep 17 00:00:00 2001
+From: Lars-Peter Clausen <lars@metafoo.de>
+Date: Sun, 1 Aug 2010 21:19:40 +0200
+Subject: [PATCH 09/16] Add ili8960 lcd driver
+
+Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
+---
+ drivers/video/backlight/Kconfig | 7 +
+ drivers/video/backlight/Makefile | 1 +
+ drivers/video/backlight/ili8960.c | 262 +++++++++++++++++++++++++++++++++++++
+ 3 files changed, 270 insertions(+)
+ create mode 100644 drivers/video/backlight/ili8960.c
+
+diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
+index d5ab658..7cd68d0 100644
+--- a/drivers/video/backlight/Kconfig
++++ b/drivers/video/backlight/Kconfig
+@@ -59,6 +59,13 @@ config LCD_LTV350QV
+
+ The LTV350QV panel is present on all ATSTK1000 boards.
+
++config LCD_ILI8960
++ tristate "Ilitek ili8960 LCD driver"
++ depends on LCD_CLASS_DEVICE && SPI
++ default n
++ help
++ Driver for the Ilitek ili8960 LCD controller chip.
++
+ config LCD_ILI922X
+ tristate "ILI Technology ILI9221/ILI9222 support"
+ depends on SPI
+diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
+index 92711fe..81d3e93 100644
+--- a/drivers/video/backlight/Makefile
++++ b/drivers/video/backlight/Makefile
+@@ -5,6 +5,7 @@ obj-$(CONFIG_LCD_CLASS_DEVICE) += lcd.o
+ obj-$(CONFIG_LCD_CORGI) += corgi_lcd.o
+ obj-$(CONFIG_LCD_HP700) += jornada720_lcd.o
+ obj-$(CONFIG_LCD_HX8357) += hx8357.o
++obj-$(CONFIG_LCD_ILI8960) += ili8960.o
+ obj-$(CONFIG_LCD_ILI922X) += ili922x.o
+ obj-$(CONFIG_LCD_ILI9320) += ili9320.o
+ obj-$(CONFIG_LCD_L4F00242T03) += l4f00242t03.o
+diff --git a/drivers/video/backlight/ili8960.c b/drivers/video/backlight/ili8960.c
+new file mode 100644
+index 0000000..61eb815
+--- /dev/null
++++ b/drivers/video/backlight/ili8960.c
+@@ -0,0 +1,262 @@
++/*
++ * Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de>
++ * Driver for Ilitek ili8960 LCD
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 675 Mass Ave, Cambridge, MA 02139, USA.
++ *
++ */
++
++#include <linux/module.h>
++#include <linux/spi/spi.h>
++#include <linux/lcd.h>
++#include <linux/delay.h>
++
++struct ili8960 {
++ struct spi_device *spi;
++ struct lcd_device *lcd;
++ bool enabled;
++ unsigned int brightness;
++};
++
++#define ILI8960_REG_BRIGHTNESS 0x03
++#define ILI8960_REG_POWER 0x05
++#define ILI8960_REG_CONTRAST 0x0d
++
++static int ili8960_write_reg(struct spi_device *spi, uint8_t reg,
++ uint8_t data)
++{
++ uint8_t buf[2];
++ buf[0] = ((reg & 0x40) << 1) | (reg & 0x3f);
++ buf[1] = data;
++
++ return spi_write(spi, buf, sizeof(buf));
++}
++
++static int ili8960_programm_power(struct spi_device *spi, bool enabled)
++{
++ int ret;
++
++ if (enabled)
++ mdelay(20);
++
++ ret = ili8960_write_reg(spi, ILI8960_REG_POWER, enabled ? 0xc7 : 0xc6);
++
++ if (!enabled)
++ mdelay(20);
++
++ return ret;
++}
++
++static int ili8960_set_power(struct lcd_device *lcd, int power)
++{
++ struct ili8960 *ili8960 = lcd_get_data(lcd);
++
++ switch (power) {
++ case FB_BLANK_UNBLANK:
++ ili8960->enabled = true;
++ break;
++ default:
++ return 0;
++ }
++
++ return ili8960_programm_power(ili8960->spi, ili8960->enabled);
++}
++
++static int ili8960_early_set_power(struct lcd_device *lcd, int power)
++{
++ struct ili8960 *ili8960 = lcd_get_data(lcd);
++
++ switch (power) {
++ case FB_BLANK_UNBLANK:
++ return 0;
++ default:
++ ili8960->enabled = false;
++ break;
++ }
++
++ return ili8960_programm_power(ili8960->spi, ili8960->enabled);
++}
++
++static int ili8960_get_power(struct lcd_device *lcd)
++{
++ struct ili8960 *ili8960 = lcd_get_data(lcd);
++ return ili8960->enabled ? FB_BLANK_UNBLANK : FB_BLANK_POWERDOWN;
++}
++
++static int ili8960_set_contrast(struct lcd_device *lcd, int contrast)
++{
++ struct ili8960 *ili8960 = lcd_get_data(lcd);
++
++ return ili8960_write_reg(ili8960->spi, ILI8960_REG_CONTRAST, contrast);
++}
++
++static int ili8960_set_mode(struct lcd_device *lcd, struct fb_videomode *mode)
++{
++ if (mode->xres != 320 && mode->yres != 240)
++ return -EINVAL;
++
++ return 0;
++}
++
++static int ili8960_set_brightness(struct ili8960 *ili8960, int brightness)
++{
++ int ret;
++
++ ret = ili8960_write_reg(ili8960->spi, ILI8960_REG_BRIGHTNESS, brightness);
++
++ if (ret == 0)
++ ili8960->brightness = brightness;
++
++ return ret;
++}
++
++static ssize_t ili8960_show_brightness(struct device *dev,
++ struct device_attribute *attr, char *buf)
++{
++ struct lcd_device *ld = to_lcd_device(dev);
++ struct ili8960 *ili8960 = lcd_get_data(ld);
++
++ return sprintf(buf, "%u\n", ili8960->brightness);
++}
++
++static ssize_t ili8960_store_brightness(struct device *dev,
++ struct device_attribute *attr, const char *buf, size_t count)
++{
++ struct lcd_device *ld = to_lcd_device(dev);
++ struct ili8960 *ili8960 = lcd_get_data(ld);
++ unsigned long brightness;
++ int ret;
++
++ ret = kstrtoul(buf, 0, &brightness);
++ if (ret)
++ return ret;
++
++ if (brightness > 255)
++ return -EINVAL;
++
++ ili8960_set_brightness(ili8960, brightness);
++
++ return count;
++}
++
++
++static DEVICE_ATTR(brightness, 0644, ili8960_show_brightness,
++ ili8960_store_brightness);
++
++static struct lcd_ops ili8960_lcd_ops = {
++ .set_power = ili8960_set_power,
++ .early_set_power = ili8960_early_set_power,
++ .get_power = ili8960_get_power,
++ .set_contrast = ili8960_set_contrast,
++ .set_mode = ili8960_set_mode,
++};
++
++static int ili8960_probe(struct spi_device *spi)
++{
++ int ret;
++ struct ili8960 *ili8960;
++
++ ili8960 = devm_kzalloc(&spi->dev, sizeof(*ili8960), GFP_KERNEL);
++ if (!ili8960)
++ return -ENOMEM;
++
++ spi->bits_per_word = 8;
++ spi->mode = SPI_MODE_3;
++
++ ret = spi_setup(spi);
++ if (ret) {
++ dev_err(&spi->dev, "Failed to setup spi\n");
++ return ret;
++ }
++
++ ili8960->spi = spi;
++
++ ili8960->lcd = lcd_device_register("ili8960-lcd", &spi->dev, ili8960,
++ &ili8960_lcd_ops);
++
++ if (IS_ERR(ili8960->lcd)) {
++ ret = PTR_ERR(ili8960->lcd);
++ dev_err(&spi->dev, "Failed to register lcd device: %d\n", ret);
++ return ret;
++ }
++
++ ili8960->lcd->props.max_contrast = 255;
++
++ ret = device_create_file(&ili8960->lcd->dev, &dev_attr_brightness);
++ if (ret)
++ goto err_unregister_lcd;
++
++ ili8960_programm_power(ili8960->spi, true);
++ ili8960->enabled = true;
++
++ spi_set_drvdata(spi, ili8960);
++
++ ili8960_write_reg(spi, 0x13, 0x01);
++
++ return 0;
++err_unregister_lcd:
++ lcd_device_unregister(ili8960->lcd);
++ return ret;
++}
++
++static int ili8960_remove(struct spi_device *spi)
++{
++ struct ili8960 *ili8960 = spi_get_drvdata(spi);
++
++ device_remove_file(&ili8960->lcd->dev, &dev_attr_brightness);
++ lcd_device_unregister(ili8960->lcd);
++
++ spi_set_drvdata(spi, NULL);
++ return 0;
++}
++
++#ifdef CONFIG_PM
++
++static int ili8960_suspend(struct spi_device *spi, pm_message_t state)
++{
++ struct ili8960 *ili8960 = spi_get_drvdata(spi);
++
++ if (ili8960->enabled)
++ ili8960_programm_power(ili8960->spi, false);
++
++ return 0;
++}
++
++static int ili8960_resume(struct spi_device *spi)
++{
++ struct ili8960 *ili8960 = spi_get_drvdata(spi);
++
++ if (ili8960->enabled)
++ ili8960_programm_power(ili8960->spi, true);
++
++ return 0;
++}
++
++#else
++#define ili8960_suspend NULL
++#define ili8960_resume NULL
++#endif
++
++static struct spi_driver ili8960_driver = {
++ .driver = {
++ .name = "ili8960",
++ .owner = THIS_MODULE,
++ },
++ .probe = ili8960_probe,
++ .remove = ili8960_remove,
++ .suspend = ili8960_suspend,
++ .resume = ili8960_resume,
++};
++module_spi_driver(ili8960_driver);
++
++MODULE_AUTHOR("Lars-Peter Clausen");
++MODULE_LICENSE("GPL");
++MODULE_DESCRIPTION("LCD driver for Ilitek ili8960");
++MODULE_ALIAS("spi:ili8960");
+--
+1.7.10.4
+
diff --git a/target/linux/xburst/patches-3.10/010-qi_lb60-Don-t-use-3-wire-spi-mode-for-the-display-fo.patch b/target/linux/xburst/patches-3.10/010-qi_lb60-Don-t-use-3-wire-spi-mode-for-the-display-fo.patch
new file mode 100644
index 0000000000..b717bd5f77
--- /dev/null
+++ b/target/linux/xburst/patches-3.10/010-qi_lb60-Don-t-use-3-wire-spi-mode-for-the-display-fo.patch
@@ -0,0 +1,28 @@
+From 590ceec7028084ebd9d643b4929ceae9fd806fbe Mon Sep 17 00:00:00 2001
+From: Lars-Peter Clausen <lars@metafoo.de>
+Date: Wed, 13 Oct 2010 01:17:24 +0200
+Subject: [PATCH 10/16] qi_lb60: Don't use 3-wire spi mode for the display for
+ now
+
+The spi_gpio driver does not support 3-wire mode.
+
+Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
+---
+ arch/mips/jz4740/board-qi_lb60.c | 1 -
+ 1 file changed, 1 deletion(-)
+
+diff --git a/arch/mips/jz4740/board-qi_lb60.c b/arch/mips/jz4740/board-qi_lb60.c
+index be2b3de..bc454e6 100644
+--- a/arch/mips/jz4740/board-qi_lb60.c
++++ b/arch/mips/jz4740/board-qi_lb60.c
+@@ -311,7 +311,6 @@ static struct spi_board_info qi_lb60_spi_board_info[] = {
+ .chip_select = 0,
+ .bus_num = 1,
+ .max_speed_hz = 30 * 1000,
+- .mode = SPI_3WIRE,
+ },
+ };
+
+--
+1.7.10.4
+
diff --git a/target/linux/xburst/patches-3.10/011-dma-Add-a-jz4740-dmaengine-driver.patch b/target/linux/xburst/patches-3.10/011-dma-Add-a-jz4740-dmaengine-driver.patch
new file mode 100644
index 0000000000..3225c7badb
--- /dev/null
+++ b/target/linux/xburst/patches-3.10/011-dma-Add-a-jz4740-dmaengine-driver.patch
@@ -0,0 +1,488 @@
+From 8c53b6491806a37d6999886d22c34bfed310034c Mon Sep 17 00:00:00 2001
+From: Lars-Peter Clausen <lars@metafoo.de>
+Date: Thu, 30 May 2013 18:25:02 +0200
+Subject: [PATCH 11/16] dma: Add a jz4740 dmaengine driver
+
+This patch adds dmaengine support for the JZ4740 DMA controller. For now the
+driver will be a wrapper around the custom JZ4740 DMA API. Once all users of the
+custom JZ4740 DMA API have been converted to the dmaengine API the custom API
+will be removed and direct hardware access will be added to the dmaengine
+driver.
+
+Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
+Signed-off-by: Vinod Koul <vinod.koul@intel.com>
+---
+ drivers/dma/Kconfig | 6 +
+ drivers/dma/Makefile | 1 +
+ drivers/dma/dma-jz4740.c | 433 ++++++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 440 insertions(+)
+ create mode 100644 drivers/dma/dma-jz4740.c
+
+diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
+index e992489..b3e8952 100644
+--- a/drivers/dma/Kconfig
++++ b/drivers/dma/Kconfig
+@@ -312,6 +312,12 @@ config MMP_PDMA
+ help
+ Support the MMP PDMA engine for PXA and MMP platfrom.
+
++config DMA_JZ4740
++ tristate "JZ4740 DMA support"
++ depends on MACH_JZ4740
++ select DMA_ENGINE
++ select DMA_VIRTUAL_CHANNELS
++
+ config DMA_ENGINE
+ bool
+
+diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
+index a2b0df5..6127a61 100644
+--- a/drivers/dma/Makefile
++++ b/drivers/dma/Makefile
+@@ -38,3 +38,4 @@ obj-$(CONFIG_DMA_SA11X0) += sa11x0-dma.o
+ obj-$(CONFIG_MMP_TDMA) += mmp_tdma.o
+ obj-$(CONFIG_DMA_OMAP) += omap-dma.o
+ obj-$(CONFIG_MMP_PDMA) += mmp_pdma.o
++obj-$(CONFIG_DMA_JZ4740) += dma-jz4740.o
+diff --git a/drivers/dma/dma-jz4740.c b/drivers/dma/dma-jz4740.c
+new file mode 100644
+index 0000000..3d42434
+--- /dev/null
++++ b/drivers/dma/dma-jz4740.c
+@@ -0,0 +1,433 @@
++/*
++ * Copyright (C) 2013, Lars-Peter Clausen <lars@metafoo.de>
++ * JZ4740 DMAC support
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 675 Mass Ave, Cambridge, MA 02139, USA.
++ *
++ */
++
++#include <linux/dmaengine.h>
++#include <linux/dma-mapping.h>
++#include <linux/err.h>
++#include <linux/init.h>
++#include <linux/list.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/slab.h>
++#include <linux/spinlock.h>
++
++#include <asm/mach-jz4740/dma.h>
++
++#include "virt-dma.h"
++
++#define JZ_DMA_NR_CHANS 6
++
++struct jz4740_dma_sg {
++ dma_addr_t addr;
++ unsigned int len;
++};
++
++struct jz4740_dma_desc {
++ struct virt_dma_desc vdesc;
++
++ enum dma_transfer_direction direction;
++ bool cyclic;
++
++ unsigned int num_sgs;
++ struct jz4740_dma_sg sg[];
++};
++
++struct jz4740_dmaengine_chan {
++ struct virt_dma_chan vchan;
++ struct jz4740_dma_chan *jz_chan;
++
++ dma_addr_t fifo_addr;
++
++ struct jz4740_dma_desc *desc;
++ unsigned int next_sg;
++};
++
++struct jz4740_dma_dev {
++ struct dma_device ddev;
++
++ struct jz4740_dmaengine_chan chan[JZ_DMA_NR_CHANS];
++};
++
++static struct jz4740_dmaengine_chan *to_jz4740_dma_chan(struct dma_chan *c)
++{
++ return container_of(c, struct jz4740_dmaengine_chan, vchan.chan);
++}
++
++static struct jz4740_dma_desc *to_jz4740_dma_desc(struct virt_dma_desc *vdesc)
++{
++ return container_of(vdesc, struct jz4740_dma_desc, vdesc);
++}
++
++static struct jz4740_dma_desc *jz4740_dma_alloc_desc(unsigned int num_sgs)
++{
++ return kzalloc(sizeof(struct jz4740_dma_desc) +
++ sizeof(struct jz4740_dma_sg) * num_sgs, GFP_ATOMIC);
++}
++
++static enum jz4740_dma_width jz4740_dma_width(enum dma_slave_buswidth width)
++{
++ switch (width) {
++ case DMA_SLAVE_BUSWIDTH_1_BYTE:
++ return JZ4740_DMA_WIDTH_8BIT;
++ case DMA_SLAVE_BUSWIDTH_2_BYTES:
++ return JZ4740_DMA_WIDTH_16BIT;
++ case DMA_SLAVE_BUSWIDTH_4_BYTES:
++ return JZ4740_DMA_WIDTH_32BIT;
++ default:
++ return JZ4740_DMA_WIDTH_32BIT;
++ }
++}
++
++static enum jz4740_dma_transfer_size jz4740_dma_maxburst(u32 maxburst)
++{
++ if (maxburst <= 1)
++ return JZ4740_DMA_TRANSFER_SIZE_1BYTE;
++ else if (maxburst <= 3)
++ return JZ4740_DMA_TRANSFER_SIZE_2BYTE;
++ else if (maxburst <= 15)
++ return JZ4740_DMA_TRANSFER_SIZE_4BYTE;
++ else if (maxburst <= 31)
++ return JZ4740_DMA_TRANSFER_SIZE_16BYTE;
++
++ return JZ4740_DMA_TRANSFER_SIZE_32BYTE;
++}
++
++static int jz4740_dma_slave_config(struct dma_chan *c,
++ const struct dma_slave_config *config)
++{
++ struct jz4740_dmaengine_chan *chan = to_jz4740_dma_chan(c);
++ struct jz4740_dma_config jzcfg;
++
++ switch (config->direction) {
++ case DMA_MEM_TO_DEV:
++ jzcfg.flags = JZ4740_DMA_SRC_AUTOINC;
++ jzcfg.transfer_size = jz4740_dma_maxburst(config->dst_maxburst);
++ chan->fifo_addr = config->dst_addr;
++ break;
++ case DMA_DEV_TO_MEM:
++ jzcfg.flags = JZ4740_DMA_DST_AUTOINC;
++ jzcfg.transfer_size = jz4740_dma_maxburst(config->src_maxburst);
++ chan->fifo_addr = config->src_addr;
++ break;
++ default:
++ return -EINVAL;
++ }
++
++
++ jzcfg.src_width = jz4740_dma_width(config->src_addr_width);
++ jzcfg.dst_width = jz4740_dma_width(config->dst_addr_width);
++ jzcfg.mode = JZ4740_DMA_MODE_SINGLE;
++ jzcfg.request_type = config->slave_id;
++
++ jz4740_dma_configure(chan->jz_chan, &jzcfg);
++
++ return 0;
++}
++
++static int jz4740_dma_terminate_all(struct dma_chan *c)
++{
++ struct jz4740_dmaengine_chan *chan = to_jz4740_dma_chan(c);
++ unsigned long flags;
++ LIST_HEAD(head);
++
++ spin_lock_irqsave(&chan->vchan.lock, flags);
++ jz4740_dma_disable(chan->jz_chan);
++ chan->desc = NULL;
++ vchan_get_all_descriptors(&chan->vchan, &head);
++ spin_unlock_irqrestore(&chan->vchan.lock, flags);
++
++ vchan_dma_desc_free_list(&chan->vchan, &head);
++
++ return 0;
++}
++
++static int jz4740_dma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
++ unsigned long arg)
++{
++ struct dma_slave_config *config = (struct dma_slave_config *)arg;
++
++ switch (cmd) {
++ case DMA_SLAVE_CONFIG:
++ return jz4740_dma_slave_config(chan, config);
++ case DMA_TERMINATE_ALL:
++ return jz4740_dma_terminate_all(chan);
++ default:
++ return -ENOSYS;
++ }
++}
++
++static int jz4740_dma_start_transfer(struct jz4740_dmaengine_chan *chan)
++{
++ dma_addr_t src_addr, dst_addr;
++ struct virt_dma_desc *vdesc;
++ struct jz4740_dma_sg *sg;
++
++ jz4740_dma_disable(chan->jz_chan);
++
++ if (!chan->desc) {
++ vdesc = vchan_next_desc(&chan->vchan);
++ if (!vdesc)
++ return 0;
++ chan->desc = to_jz4740_dma_desc(vdesc);
++ chan->next_sg = 0;
++ }
++
++ if (chan->next_sg == chan->desc->num_sgs)
++ chan->next_sg = 0;
++
++ sg = &chan->desc->sg[chan->next_sg];
++
++ if (chan->desc->direction == DMA_MEM_TO_DEV) {
++ src_addr = sg->addr;
++ dst_addr = chan->fifo_addr;
++ } else {
++ src_addr = chan->fifo_addr;
++ dst_addr = sg->addr;
++ }
++ jz4740_dma_set_src_addr(chan->jz_chan, src_addr);
++ jz4740_dma_set_dst_addr(chan->jz_chan, dst_addr);
++ jz4740_dma_set_transfer_count(chan->jz_chan, sg->len);
++
++ chan->next_sg++;
++
++ jz4740_dma_enable(chan->jz_chan);
++
++ return 0;
++}
++
++static void jz4740_dma_complete_cb(struct jz4740_dma_chan *jz_chan, int error,
++ void *devid)
++{
++ struct jz4740_dmaengine_chan *chan = devid;
++
++ spin_lock(&chan->vchan.lock);
++ if (chan->desc) {
++ if (chan->desc && chan->desc->cyclic) {
++ vchan_cyclic_callback(&chan->desc->vdesc);
++ } else {
++ if (chan->next_sg == chan->desc->num_sgs) {
++ chan->desc = NULL;
++ vchan_cookie_complete(&chan->desc->vdesc);
++ }
++ }
++ }
++ jz4740_dma_start_transfer(chan);
++ spin_unlock(&chan->vchan.lock);
++}
++
++static void jz4740_dma_issue_pending(struct dma_chan *c)
++{
++ struct jz4740_dmaengine_chan *chan = to_jz4740_dma_chan(c);
++ unsigned long flags;
++
++ spin_lock_irqsave(&chan->vchan.lock, flags);
++ if (vchan_issue_pending(&chan->vchan) && !chan->desc)
++ jz4740_dma_start_transfer(chan);
++ spin_unlock_irqrestore(&chan->vchan.lock, flags);
++}
++
++static struct dma_async_tx_descriptor *jz4740_dma_prep_slave_sg(
++ struct dma_chan *c, struct scatterlist *sgl,
++ unsigned int sg_len, enum dma_transfer_direction direction,
++ unsigned long flags, void *context)
++{
++ struct jz4740_dmaengine_chan *chan = to_jz4740_dma_chan(c);
++ struct jz4740_dma_desc *desc;
++ struct scatterlist *sg;
++ unsigned int i;
++
++ desc = jz4740_dma_alloc_desc(sg_len);
++ if (!desc)
++ return NULL;
++
++ for_each_sg(sgl, sg, sg_len, i) {
++ desc->sg[i].addr = sg_dma_address(sg);
++ desc->sg[i].len = sg_dma_len(sg);
++ }
++
++ desc->num_sgs = sg_len;
++ desc->direction = direction;
++ desc->cyclic = false;
++
++ return vchan_tx_prep(&chan->vchan, &desc->vdesc, flags);
++}
++
++static struct dma_async_tx_descriptor *jz4740_dma_prep_dma_cyclic(
++ struct dma_chan *c, dma_addr_t buf_addr, size_t buf_len,
++ size_t period_len, enum dma_transfer_direction direction,
++ unsigned long flags, void *context)
++{
++ struct jz4740_dmaengine_chan *chan = to_jz4740_dma_chan(c);
++ struct jz4740_dma_desc *desc;
++ unsigned int num_periods, i;
++
++ if (buf_len % period_len)
++ return NULL;
++
++ num_periods = buf_len / period_len;
++
++ desc = jz4740_dma_alloc_desc(num_periods);
++ if (!desc)
++ return NULL;
++
++ for (i = 0; i < num_periods; i++) {
++ desc->sg[i].addr = buf_addr;
++ desc->sg[i].len = period_len;
++ buf_addr += period_len;
++ }
++
++ desc->num_sgs = num_periods;
++ desc->direction = direction;
++ desc->cyclic = true;
++
++ return vchan_tx_prep(&chan->vchan, &desc->vdesc, flags);
++}
++
++static size_t jz4740_dma_desc_residue(struct jz4740_dmaengine_chan *chan,
++ struct jz4740_dma_desc *desc, unsigned int next_sg)
++{
++ size_t residue = 0;
++ unsigned int i;
++
++ residue = 0;
++
++ for (i = next_sg; i < desc->num_sgs; i++)
++ residue += desc->sg[i].len;
++
++ if (next_sg != 0)
++ residue += jz4740_dma_get_residue(chan->jz_chan);
++
++ return residue;
++}
++
++static enum dma_status jz4740_dma_tx_status(struct dma_chan *c,
++ dma_cookie_t cookie, struct dma_tx_state *state)
++{
++ struct jz4740_dmaengine_chan *chan = to_jz4740_dma_chan(c);
++ struct virt_dma_desc *vdesc;
++ enum dma_status status;
++ unsigned long flags;
++
++ status = dma_cookie_status(c, cookie, state);
++ if (status == DMA_SUCCESS || !state)
++ return status;
++
++ spin_lock_irqsave(&chan->vchan.lock, flags);
++ vdesc = vchan_find_desc(&chan->vchan, cookie);
++ if (cookie == chan->desc->vdesc.tx.cookie) {
++ state->residue = jz4740_dma_desc_residue(chan, chan->desc,
++ chan->next_sg);
++ } else if (vdesc) {
++ state->residue = jz4740_dma_desc_residue(chan,
++ to_jz4740_dma_desc(vdesc), 0);
++ } else {
++ state->residue = 0;
++ }
++ spin_unlock_irqrestore(&chan->vchan.lock, flags);
++
++ return status;
++}
++
++static int jz4740_dma_alloc_chan_resources(struct dma_chan *c)
++{
++ struct jz4740_dmaengine_chan *chan = to_jz4740_dma_chan(c);
++
++ chan->jz_chan = jz4740_dma_request(chan, NULL);
++ if (!chan->jz_chan)
++ return -EBUSY;
++
++ jz4740_dma_set_complete_cb(chan->jz_chan, jz4740_dma_complete_cb);
++
++ return 0;
++}
++
++static void jz4740_dma_free_chan_resources(struct dma_chan *c)
++{
++ struct jz4740_dmaengine_chan *chan = to_jz4740_dma_chan(c);
++
++ vchan_free_chan_resources(&chan->vchan);
++ jz4740_dma_free(chan->jz_chan);
++ chan->jz_chan = NULL;
++}
++
++static void jz4740_dma_desc_free(struct virt_dma_desc *vdesc)
++{
++ kfree(container_of(vdesc, struct jz4740_dma_desc, vdesc));
++}
++
++static int jz4740_dma_probe(struct platform_device *pdev)
++{
++ struct jz4740_dmaengine_chan *chan;
++ struct jz4740_dma_dev *dmadev;
++ struct dma_device *dd;
++ unsigned int i;
++ int ret;
++
++ dmadev = devm_kzalloc(&pdev->dev, sizeof(*dmadev), GFP_KERNEL);
++ if (!dmadev)
++ return -EINVAL;
++
++ dd = &dmadev->ddev;
++
++ dma_cap_set(DMA_SLAVE, dd->cap_mask);
++ dma_cap_set(DMA_CYCLIC, dd->cap_mask);
++ dd->device_alloc_chan_resources = jz4740_dma_alloc_chan_resources;
++ dd->device_free_chan_resources = jz4740_dma_free_chan_resources;
++ dd->device_tx_status = jz4740_dma_tx_status;
++ dd->device_issue_pending = jz4740_dma_issue_pending;
++ dd->device_prep_slave_sg = jz4740_dma_prep_slave_sg;
++ dd->device_prep_dma_cyclic = jz4740_dma_prep_dma_cyclic;
++ dd->device_control = jz4740_dma_control;
++ dd->dev = &pdev->dev;
++ dd->chancnt = JZ_DMA_NR_CHANS;
++ INIT_LIST_HEAD(&dd->channels);
++
++ for (i = 0; i < dd->chancnt; i++) {
++ chan = &dmadev->chan[i];
++ chan->vchan.desc_free = jz4740_dma_desc_free;
++ vchan_init(&chan->vchan, dd);
++ }
++
++ ret = dma_async_device_register(dd);
++ if (ret)
++ return ret;
++
++ platform_set_drvdata(pdev, dmadev);
++
++ return 0;
++}
++
++static int jz4740_dma_remove(struct platform_device *pdev)
++{
++ struct jz4740_dma_dev *dmadev = platform_get_drvdata(pdev);
++
++ dma_async_device_unregister(&dmadev->ddev);
++
++ return 0;
++}
++
++static struct platform_driver jz4740_dma_driver = {
++ .probe = jz4740_dma_probe,
++ .remove = jz4740_dma_remove,
++ .driver = {
++ .name = "jz4740-dma",
++ .owner = THIS_MODULE,
++ },
++};
++module_platform_driver(jz4740_dma_driver);
++
++MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
++MODULE_DESCRIPTION("JZ4740 DMA driver");
++MODULE_LICENSE("GPLv2");
+--
+1.7.10.4
+
diff --git a/target/linux/xburst/patches-3.10/012-MIPS-JZ4740-Correct-clock-gate-bit-for-DMA-controlle.patch b/target/linux/xburst/patches-3.10/012-MIPS-JZ4740-Correct-clock-gate-bit-for-DMA-controlle.patch
new file mode 100644
index 0000000000..06850ec0ba
--- /dev/null
+++ b/target/linux/xburst/patches-3.10/012-MIPS-JZ4740-Correct-clock-gate-bit-for-DMA-controlle.patch
@@ -0,0 +1,27 @@
+From 1a0086ae912b81a1e6c7213e97059c50a7bfe636 Mon Sep 17 00:00:00 2001
+From: Maarten ter Huurne <maarten@treewalker.org>
+Date: Sun, 6 May 2012 01:51:09 +0200
+Subject: [PATCH 12/16] MIPS: JZ4740: Correct clock gate bit for DMA
+ controller
+
+Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
+---
+ arch/mips/jz4740/clock.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/arch/mips/jz4740/clock.c b/arch/mips/jz4740/clock.c
+index 484d38a..1b5f554 100644
+--- a/arch/mips/jz4740/clock.c
++++ b/arch/mips/jz4740/clock.c
+@@ -687,7 +687,7 @@ static struct clk jz4740_clock_simple_clks[] = {
+ [3] = {
+ .name = "dma",
+ .parent = &jz_clk_high_speed_peripheral.clk,
+- .gate_bit = JZ_CLOCK_GATE_UART0,
++ .gate_bit = JZ_CLOCK_GATE_DMAC,
+ .ops = &jz_clk_simple_ops,
+ },
+ [4] = {
+--
+1.7.10.4
+
diff --git a/target/linux/xburst/patches-3.10/013-MIPS-JZ4740-Acquire-and-enable-DMA-controller-clock.patch b/target/linux/xburst/patches-3.10/013-MIPS-JZ4740-Acquire-and-enable-DMA-controller-clock.patch
new file mode 100644
index 0000000000..110f061568
--- /dev/null
+++ b/target/linux/xburst/patches-3.10/013-MIPS-JZ4740-Acquire-and-enable-DMA-controller-clock.patch
@@ -0,0 +1,80 @@
+From b1ab71156cd49b2389397d3be54b93fe394a1cb2 Mon Sep 17 00:00:00 2001
+From: Maarten ter Huurne <maarten@treewalker.org>
+Date: Tue, 9 Oct 2012 13:09:57 +0200
+Subject: [PATCH 13/16] MIPS: JZ4740: Acquire and enable DMA controller clock
+
+Previously, it was assumed that the DMA controller clock is not gated
+when the kernel starts running. While that is the power-on state, it is
+safer to not rely on that.
+
+Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
+---
+ arch/mips/jz4740/clock.c | 2 +-
+ arch/mips/jz4740/dma.c | 24 ++++++++++++++++++++++--
+ 2 files changed, 23 insertions(+), 3 deletions(-)
+
+diff --git a/arch/mips/jz4740/clock.c b/arch/mips/jz4740/clock.c
+index 1b5f554..b3eba60 100644
+--- a/arch/mips/jz4740/clock.c
++++ b/arch/mips/jz4740/clock.c
+@@ -921,4 +921,4 @@ static int jz4740_clock_init(void)
+
+ return 0;
+ }
+-arch_initcall(jz4740_clock_init);
++postcore_initcall(jz4740_clock_init);
+diff --git a/arch/mips/jz4740/dma.c b/arch/mips/jz4740/dma.c
+index 317ec6f..fb5266c 100644
+--- a/arch/mips/jz4740/dma.c
++++ b/arch/mips/jz4740/dma.c
+@@ -16,6 +16,7 @@
+ #include <linux/kernel.h>
+ #include <linux/module.h>
+ #include <linux/spinlock.h>
++#include <linux/clk.h>
+ #include <linux/interrupt.h>
+
+ #include <linux/dma-mapping.h>
+@@ -268,6 +269,7 @@ static irqreturn_t jz4740_dma_irq(int irq, void *dev_id)
+
+ static int jz4740_dma_init(void)
+ {
++ struct clk *clk;
+ unsigned int ret;
+
+ jz4740_dma_base = ioremap(JZ4740_DMAC_BASE_ADDR, 0x400);
+@@ -277,11 +279,29 @@ static int jz4740_dma_init(void)
+
+ spin_lock_init(&jz4740_dma_lock);
+
+- ret = request_irq(JZ4740_IRQ_DMAC, jz4740_dma_irq, 0, "DMA", NULL);
++ clk = clk_get(NULL, "dma");
++ if (IS_ERR(clk)) {
++ ret = PTR_ERR(clk);
++ printk(KERN_ERR "JZ4740 DMA: Failed to request clock: %d\n",
++ ret);
++ goto err_iounmap;
++ }
+
+- if (ret)
++ ret = request_irq(JZ4740_IRQ_DMAC, jz4740_dma_irq, 0, "DMA", NULL);
++ if (ret) {
+ printk(KERN_ERR "JZ4740 DMA: Failed to request irq: %d\n", ret);
++ goto err_clkput;
++ }
++
++ clk_enable(clk);
++
++ return 0;
++
++err_clkput:
++ clk_put(clk);
+
++err_iounmap:
++ iounmap(jz4740_dma_base);
+ return ret;
+ }
+ arch_initcall(jz4740_dma_init);
+--
+1.7.10.4
+
diff --git a/target/linux/xburst/patches-3.10/014-MIPS-jz4740-Register-jz4740-DMA-device.patch b/target/linux/xburst/patches-3.10/014-MIPS-jz4740-Register-jz4740-DMA-device.patch
new file mode 100644
index 0000000000..1ae288b264
--- /dev/null
+++ b/target/linux/xburst/patches-3.10/014-MIPS-jz4740-Register-jz4740-DMA-device.patch
@@ -0,0 +1,73 @@
+From 734bdfd446b1eba0c54ad07703a192e6093417fd Mon Sep 17 00:00:00 2001
+From: Lars-Peter Clausen <lars@metafoo.de>
+Date: Thu, 30 May 2013 18:25:03 +0200
+Subject: [PATCH 14/16] MIPS: jz4740: Register jz4740 DMA device
+
+Register a device for the newly added jz4740 dmaengine driver.
+
+Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
+Acked-by: Ralf Baechle <ralf@linux-mips.org>
+[manually edited to align struct assignment]
+Signed-off-by: Vinod Koul <vinod.koul@intel.com>
+---
+ arch/mips/include/asm/mach-jz4740/platform.h | 1 +
+ arch/mips/jz4740/board-qi_lb60.c | 1 +
+ arch/mips/jz4740/platform.c | 21 +++++++++++++++++++++
+ 3 files changed, 23 insertions(+)
+
+diff --git a/arch/mips/include/asm/mach-jz4740/platform.h b/arch/mips/include/asm/mach-jz4740/platform.h
+index 72cfebd..05988c2 100644
+--- a/arch/mips/include/asm/mach-jz4740/platform.h
++++ b/arch/mips/include/asm/mach-jz4740/platform.h
+@@ -32,6 +32,7 @@ extern struct platform_device jz4740_codec_device;
+ extern struct platform_device jz4740_adc_device;
+ extern struct platform_device jz4740_wdt_device;
+ extern struct platform_device jz4740_pwm_device;
++extern struct platform_device jz4740_dma_device;
+
+ void jz4740_serial_device_register(void);
+
+diff --git a/arch/mips/jz4740/board-qi_lb60.c b/arch/mips/jz4740/board-qi_lb60.c
+index bc454e6..b857521 100644
+--- a/arch/mips/jz4740/board-qi_lb60.c
++++ b/arch/mips/jz4740/board-qi_lb60.c
+@@ -437,6 +437,7 @@ static struct platform_device *jz_platform_devices[] __initdata = {
+ &jz4740_rtc_device,
+ &jz4740_adc_device,
+ &jz4740_pwm_device,
++ &jz4740_dma_device,
+ &qi_lb60_gpio_keys,
+ &qi_lb60_pwm_beeper,
+ &qi_lb60_charger_device,
+diff --git a/arch/mips/jz4740/platform.c b/arch/mips/jz4740/platform.c
+index e9348fd..df65677 100644
+--- a/arch/mips/jz4740/platform.c
++++ b/arch/mips/jz4740/platform.c
+@@ -329,3 +329,24 @@ struct platform_device jz4740_pwm_device = {
+ .name = "jz4740-pwm",
+ .id = -1,
+ };
++
++/* DMA */
++static struct resource jz4740_dma_resources[] = {
++ {
++ .start = JZ4740_DMAC_BASE_ADDR,
++ .end = JZ4740_DMAC_BASE_ADDR + 0x400 - 1,
++ .flags = IORESOURCE_MEM,
++ },
++ {
++ .start = JZ4740_IRQ_DMAC,
++ .end = JZ4740_IRQ_DMAC,
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++struct platform_device jz4740_dma_device = {
++ .name = "jz4740-dma",
++ .id = -1,
++ .num_resources = ARRAY_SIZE(jz4740_dma_resources),
++ .resource = jz4740_dma_resources,
++};
+--
+1.7.10.4
+
diff --git a/target/linux/xburst/patches-3.10/015-MIPS-jz4740-Remove-custom-DMA-API.patch b/target/linux/xburst/patches-3.10/015-MIPS-jz4740-Remove-custom-DMA-API.patch
new file mode 100644
index 0000000000..ff25552eaf
--- /dev/null
+++ b/target/linux/xburst/patches-3.10/015-MIPS-jz4740-Remove-custom-DMA-API.patch
@@ -0,0 +1,854 @@
+From 7b91fca454e66ac1bc1fe5b68de0bf55f799bd41 Mon Sep 17 00:00:00 2001
+From: Lars-Peter Clausen <lars@metafoo.de>
+Date: Thu, 30 May 2013 18:25:05 +0200
+Subject: [PATCH 15/16] MIPS: jz4740: Remove custom DMA API
+
+Now that all users of the custom jz4740 DMA API have been converted to use
+the dmaengine API instead we can remove the custom API and move all the code
+talking to the hardware to the dmaengine driver.
+
+Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
+Acked-by: Ralf Baechle <ralf@linux-mips.org>
+Signed-off-by: Vinod Koul <vinod.koul@intel.com>
+---
+ arch/mips/include/asm/mach-jz4740/dma.h | 56 ------
+ arch/mips/jz4740/Makefile | 2 +-
+ arch/mips/jz4740/dma.c | 307 -------------------------------
+ drivers/dma/dma-jz4740.c | 258 ++++++++++++++++++++++----
+ 4 files changed, 222 insertions(+), 401 deletions(-)
+ delete mode 100644 arch/mips/jz4740/dma.c
+
+diff --git a/arch/mips/include/asm/mach-jz4740/dma.h b/arch/mips/include/asm/mach-jz4740/dma.h
+index 98b4e7c..509cd58 100644
+--- a/arch/mips/include/asm/mach-jz4740/dma.h
++++ b/arch/mips/include/asm/mach-jz4740/dma.h
+@@ -16,8 +16,6 @@
+ #ifndef __ASM_MACH_JZ4740_DMA_H__
+ #define __ASM_MACH_JZ4740_DMA_H__
+
+-struct jz4740_dma_chan;
+-
+ enum jz4740_dma_request_type {
+ JZ4740_DMA_TYPE_AUTO_REQUEST = 8,
+ JZ4740_DMA_TYPE_UART_TRANSMIT = 20,
+@@ -33,58 +31,4 @@ enum jz4740_dma_request_type {
+ JZ4740_DMA_TYPE_SLCD = 30,
+ };
+
+-enum jz4740_dma_width {
+- JZ4740_DMA_WIDTH_32BIT = 0,
+- JZ4740_DMA_WIDTH_8BIT = 1,
+- JZ4740_DMA_WIDTH_16BIT = 2,
+-};
+-
+-enum jz4740_dma_transfer_size {
+- JZ4740_DMA_TRANSFER_SIZE_4BYTE = 0,
+- JZ4740_DMA_TRANSFER_SIZE_1BYTE = 1,
+- JZ4740_DMA_TRANSFER_SIZE_2BYTE = 2,
+- JZ4740_DMA_TRANSFER_SIZE_16BYTE = 3,
+- JZ4740_DMA_TRANSFER_SIZE_32BYTE = 4,
+-};
+-
+-enum jz4740_dma_flags {
+- JZ4740_DMA_SRC_AUTOINC = 0x2,
+- JZ4740_DMA_DST_AUTOINC = 0x1,
+-};
+-
+-enum jz4740_dma_mode {
+- JZ4740_DMA_MODE_SINGLE = 0,
+- JZ4740_DMA_MODE_BLOCK = 1,
+-};
+-
+-struct jz4740_dma_config {
+- enum jz4740_dma_width src_width;
+- enum jz4740_dma_width dst_width;
+- enum jz4740_dma_transfer_size transfer_size;
+- enum jz4740_dma_request_type request_type;
+- enum jz4740_dma_flags flags;
+- enum jz4740_dma_mode mode;
+-};
+-
+-typedef void (*jz4740_dma_complete_callback_t)(struct jz4740_dma_chan *, int, void *);
+-
+-struct jz4740_dma_chan *jz4740_dma_request(void *dev, const char *name);
+-void jz4740_dma_free(struct jz4740_dma_chan *dma);
+-
+-void jz4740_dma_configure(struct jz4740_dma_chan *dma,
+- const struct jz4740_dma_config *config);
+-
+-
+-void jz4740_dma_enable(struct jz4740_dma_chan *dma);
+-void jz4740_dma_disable(struct jz4740_dma_chan *dma);
+-
+-void jz4740_dma_set_src_addr(struct jz4740_dma_chan *dma, dma_addr_t src);
+-void jz4740_dma_set_dst_addr(struct jz4740_dma_chan *dma, dma_addr_t dst);
+-void jz4740_dma_set_transfer_count(struct jz4740_dma_chan *dma, uint32_t count);
+-
+-uint32_t jz4740_dma_get_residue(const struct jz4740_dma_chan *dma);
+-
+-void jz4740_dma_set_complete_cb(struct jz4740_dma_chan *dma,
+- jz4740_dma_complete_callback_t cb);
+-
+ #endif /* __ASM_JZ4740_DMA_H__ */
+diff --git a/arch/mips/jz4740/Makefile b/arch/mips/jz4740/Makefile
+index 63bad0e..28e5535 100644
+--- a/arch/mips/jz4740/Makefile
++++ b/arch/mips/jz4740/Makefile
+@@ -4,7 +4,7 @@
+
+ # Object file lists.
+
+-obj-y += prom.o irq.o time.o reset.o setup.o dma.o \
++obj-y += prom.o irq.o time.o reset.o setup.o \
+ gpio.o clock.o platform.o timer.o serial.o
+
+ obj-$(CONFIG_DEBUG_FS) += clock-debugfs.o
+diff --git a/arch/mips/jz4740/dma.c b/arch/mips/jz4740/dma.c
+deleted file mode 100644
+index fb5266c..0000000
+--- a/arch/mips/jz4740/dma.c
++++ /dev/null
+@@ -1,307 +0,0 @@
+-/*
+- * Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
+- * JZ4740 SoC DMA support
+- *
+- * This program is free software; you can redistribute it and/or modify it
+- * under the terms of the GNU General Public License as published by the
+- * Free Software Foundation; either version 2 of the License, or (at your
+- * option) any later version.
+- *
+- * You should have received a copy of the GNU General Public License along
+- * with this program; if not, write to the Free Software Foundation, Inc.,
+- * 675 Mass Ave, Cambridge, MA 02139, USA.
+- *
+- */
+-
+-#include <linux/kernel.h>
+-#include <linux/module.h>
+-#include <linux/spinlock.h>
+-#include <linux/clk.h>
+-#include <linux/interrupt.h>
+-
+-#include <linux/dma-mapping.h>
+-#include <asm/mach-jz4740/dma.h>
+-#include <asm/mach-jz4740/base.h>
+-
+-#define JZ_REG_DMA_SRC_ADDR(x) (0x00 + (x) * 0x20)
+-#define JZ_REG_DMA_DST_ADDR(x) (0x04 + (x) * 0x20)
+-#define JZ_REG_DMA_TRANSFER_COUNT(x) (0x08 + (x) * 0x20)
+-#define JZ_REG_DMA_REQ_TYPE(x) (0x0C + (x) * 0x20)
+-#define JZ_REG_DMA_STATUS_CTRL(x) (0x10 + (x) * 0x20)
+-#define JZ_REG_DMA_CMD(x) (0x14 + (x) * 0x20)
+-#define JZ_REG_DMA_DESC_ADDR(x) (0x18 + (x) * 0x20)
+-
+-#define JZ_REG_DMA_CTRL 0x300
+-#define JZ_REG_DMA_IRQ 0x304
+-#define JZ_REG_DMA_DOORBELL 0x308
+-#define JZ_REG_DMA_DOORBELL_SET 0x30C
+-
+-#define JZ_DMA_STATUS_CTRL_NO_DESC BIT(31)
+-#define JZ_DMA_STATUS_CTRL_DESC_INV BIT(6)
+-#define JZ_DMA_STATUS_CTRL_ADDR_ERR BIT(4)
+-#define JZ_DMA_STATUS_CTRL_TRANSFER_DONE BIT(3)
+-#define JZ_DMA_STATUS_CTRL_HALT BIT(2)
+-#define JZ_DMA_STATUS_CTRL_COUNT_TERMINATE BIT(1)
+-#define JZ_DMA_STATUS_CTRL_ENABLE BIT(0)
+-
+-#define JZ_DMA_CMD_SRC_INC BIT(23)
+-#define JZ_DMA_CMD_DST_INC BIT(22)
+-#define JZ_DMA_CMD_RDIL_MASK (0xf << 16)
+-#define JZ_DMA_CMD_SRC_WIDTH_MASK (0x3 << 14)
+-#define JZ_DMA_CMD_DST_WIDTH_MASK (0x3 << 12)
+-#define JZ_DMA_CMD_INTERVAL_LENGTH_MASK (0x7 << 8)
+-#define JZ_DMA_CMD_BLOCK_MODE BIT(7)
+-#define JZ_DMA_CMD_DESC_VALID BIT(4)
+-#define JZ_DMA_CMD_DESC_VALID_MODE BIT(3)
+-#define JZ_DMA_CMD_VALID_IRQ_ENABLE BIT(2)
+-#define JZ_DMA_CMD_TRANSFER_IRQ_ENABLE BIT(1)
+-#define JZ_DMA_CMD_LINK_ENABLE BIT(0)
+-
+-#define JZ_DMA_CMD_FLAGS_OFFSET 22
+-#define JZ_DMA_CMD_RDIL_OFFSET 16
+-#define JZ_DMA_CMD_SRC_WIDTH_OFFSET 14
+-#define JZ_DMA_CMD_DST_WIDTH_OFFSET 12
+-#define JZ_DMA_CMD_TRANSFER_SIZE_OFFSET 8
+-#define JZ_DMA_CMD_MODE_OFFSET 7
+-
+-#define JZ_DMA_CTRL_PRIORITY_MASK (0x3 << 8)
+-#define JZ_DMA_CTRL_HALT BIT(3)
+-#define JZ_DMA_CTRL_ADDRESS_ERROR BIT(2)
+-#define JZ_DMA_CTRL_ENABLE BIT(0)
+-
+-
+-static void __iomem *jz4740_dma_base;
+-static spinlock_t jz4740_dma_lock;
+-
+-static inline uint32_t jz4740_dma_read(size_t reg)
+-{
+- return readl(jz4740_dma_base + reg);
+-}
+-
+-static inline void jz4740_dma_write(size_t reg, uint32_t val)
+-{
+- writel(val, jz4740_dma_base + reg);
+-}
+-
+-static inline void jz4740_dma_write_mask(size_t reg, uint32_t val, uint32_t mask)
+-{
+- uint32_t val2;
+- val2 = jz4740_dma_read(reg);
+- val2 &= ~mask;
+- val2 |= val;
+- jz4740_dma_write(reg, val2);
+-}
+-
+-struct jz4740_dma_chan {
+- unsigned int id;
+- void *dev;
+- const char *name;
+-
+- enum jz4740_dma_flags flags;
+- uint32_t transfer_shift;
+-
+- jz4740_dma_complete_callback_t complete_cb;
+-
+- unsigned used:1;
+-};
+-
+-#define JZ4740_DMA_CHANNEL(_id) { .id = _id }
+-
+-struct jz4740_dma_chan jz4740_dma_channels[] = {
+- JZ4740_DMA_CHANNEL(0),
+- JZ4740_DMA_CHANNEL(1),
+- JZ4740_DMA_CHANNEL(2),
+- JZ4740_DMA_CHANNEL(3),
+- JZ4740_DMA_CHANNEL(4),
+- JZ4740_DMA_CHANNEL(5),
+-};
+-
+-struct jz4740_dma_chan *jz4740_dma_request(void *dev, const char *name)
+-{
+- unsigned int i;
+- struct jz4740_dma_chan *dma = NULL;
+-
+- spin_lock(&jz4740_dma_lock);
+-
+- for (i = 0; i < ARRAY_SIZE(jz4740_dma_channels); ++i) {
+- if (!jz4740_dma_channels[i].used) {
+- dma = &jz4740_dma_channels[i];
+- dma->used = 1;
+- break;
+- }
+- }
+-
+- spin_unlock(&jz4740_dma_lock);
+-
+- if (!dma)
+- return NULL;
+-
+- dma->dev = dev;
+- dma->name = name;
+-
+- return dma;
+-}
+-EXPORT_SYMBOL_GPL(jz4740_dma_request);
+-
+-void jz4740_dma_configure(struct jz4740_dma_chan *dma,
+- const struct jz4740_dma_config *config)
+-{
+- uint32_t cmd;
+-
+- switch (config->transfer_size) {
+- case JZ4740_DMA_TRANSFER_SIZE_2BYTE:
+- dma->transfer_shift = 1;
+- break;
+- case JZ4740_DMA_TRANSFER_SIZE_4BYTE:
+- dma->transfer_shift = 2;
+- break;
+- case JZ4740_DMA_TRANSFER_SIZE_16BYTE:
+- dma->transfer_shift = 4;
+- break;
+- case JZ4740_DMA_TRANSFER_SIZE_32BYTE:
+- dma->transfer_shift = 5;
+- break;
+- default:
+- dma->transfer_shift = 0;
+- break;
+- }
+-
+- cmd = config->flags << JZ_DMA_CMD_FLAGS_OFFSET;
+- cmd |= config->src_width << JZ_DMA_CMD_SRC_WIDTH_OFFSET;
+- cmd |= config->dst_width << JZ_DMA_CMD_DST_WIDTH_OFFSET;
+- cmd |= config->transfer_size << JZ_DMA_CMD_TRANSFER_SIZE_OFFSET;
+- cmd |= config->mode << JZ_DMA_CMD_MODE_OFFSET;
+- cmd |= JZ_DMA_CMD_TRANSFER_IRQ_ENABLE;
+-
+- jz4740_dma_write(JZ_REG_DMA_CMD(dma->id), cmd);
+- jz4740_dma_write(JZ_REG_DMA_STATUS_CTRL(dma->id), 0);
+- jz4740_dma_write(JZ_REG_DMA_REQ_TYPE(dma->id), config->request_type);
+-}
+-EXPORT_SYMBOL_GPL(jz4740_dma_configure);
+-
+-void jz4740_dma_set_src_addr(struct jz4740_dma_chan *dma, dma_addr_t src)
+-{
+- jz4740_dma_write(JZ_REG_DMA_SRC_ADDR(dma->id), src);
+-}
+-EXPORT_SYMBOL_GPL(jz4740_dma_set_src_addr);
+-
+-void jz4740_dma_set_dst_addr(struct jz4740_dma_chan *dma, dma_addr_t dst)
+-{
+- jz4740_dma_write(JZ_REG_DMA_DST_ADDR(dma->id), dst);
+-}
+-EXPORT_SYMBOL_GPL(jz4740_dma_set_dst_addr);
+-
+-void jz4740_dma_set_transfer_count(struct jz4740_dma_chan *dma, uint32_t count)
+-{
+- count >>= dma->transfer_shift;
+- jz4740_dma_write(JZ_REG_DMA_TRANSFER_COUNT(dma->id), count);
+-}
+-EXPORT_SYMBOL_GPL(jz4740_dma_set_transfer_count);
+-
+-void jz4740_dma_set_complete_cb(struct jz4740_dma_chan *dma,
+- jz4740_dma_complete_callback_t cb)
+-{
+- dma->complete_cb = cb;
+-}
+-EXPORT_SYMBOL_GPL(jz4740_dma_set_complete_cb);
+-
+-void jz4740_dma_free(struct jz4740_dma_chan *dma)
+-{
+- dma->dev = NULL;
+- dma->complete_cb = NULL;
+- dma->used = 0;
+-}
+-EXPORT_SYMBOL_GPL(jz4740_dma_free);
+-
+-void jz4740_dma_enable(struct jz4740_dma_chan *dma)
+-{
+- jz4740_dma_write_mask(JZ_REG_DMA_STATUS_CTRL(dma->id),
+- JZ_DMA_STATUS_CTRL_NO_DESC | JZ_DMA_STATUS_CTRL_ENABLE,
+- JZ_DMA_STATUS_CTRL_HALT | JZ_DMA_STATUS_CTRL_NO_DESC |
+- JZ_DMA_STATUS_CTRL_ENABLE);
+-
+- jz4740_dma_write_mask(JZ_REG_DMA_CTRL,
+- JZ_DMA_CTRL_ENABLE,
+- JZ_DMA_CTRL_HALT | JZ_DMA_CTRL_ENABLE);
+-}
+-EXPORT_SYMBOL_GPL(jz4740_dma_enable);
+-
+-void jz4740_dma_disable(struct jz4740_dma_chan *dma)
+-{
+- jz4740_dma_write_mask(JZ_REG_DMA_STATUS_CTRL(dma->id), 0,
+- JZ_DMA_STATUS_CTRL_ENABLE);
+-}
+-EXPORT_SYMBOL_GPL(jz4740_dma_disable);
+-
+-uint32_t jz4740_dma_get_residue(const struct jz4740_dma_chan *dma)
+-{
+- uint32_t residue;
+- residue = jz4740_dma_read(JZ_REG_DMA_TRANSFER_COUNT(dma->id));
+- return residue << dma->transfer_shift;
+-}
+-EXPORT_SYMBOL_GPL(jz4740_dma_get_residue);
+-
+-static void jz4740_dma_chan_irq(struct jz4740_dma_chan *dma)
+-{
+- (void) jz4740_dma_read(JZ_REG_DMA_STATUS_CTRL(dma->id));
+-
+- jz4740_dma_write_mask(JZ_REG_DMA_STATUS_CTRL(dma->id), 0,
+- JZ_DMA_STATUS_CTRL_ENABLE | JZ_DMA_STATUS_CTRL_TRANSFER_DONE);
+-
+- if (dma->complete_cb)
+- dma->complete_cb(dma, 0, dma->dev);
+-}
+-
+-static irqreturn_t jz4740_dma_irq(int irq, void *dev_id)
+-{
+- uint32_t irq_status;
+- unsigned int i;
+-
+- irq_status = readl(jz4740_dma_base + JZ_REG_DMA_IRQ);
+-
+- for (i = 0; i < 6; ++i) {
+- if (irq_status & (1 << i))
+- jz4740_dma_chan_irq(&jz4740_dma_channels[i]);
+- }
+-
+- return IRQ_HANDLED;
+-}
+-
+-static int jz4740_dma_init(void)
+-{
+- struct clk *clk;
+- unsigned int ret;
+-
+- jz4740_dma_base = ioremap(JZ4740_DMAC_BASE_ADDR, 0x400);
+-
+- if (!jz4740_dma_base)
+- return -EBUSY;
+-
+- spin_lock_init(&jz4740_dma_lock);
+-
+- clk = clk_get(NULL, "dma");
+- if (IS_ERR(clk)) {
+- ret = PTR_ERR(clk);
+- printk(KERN_ERR "JZ4740 DMA: Failed to request clock: %d\n",
+- ret);
+- goto err_iounmap;
+- }
+-
+- ret = request_irq(JZ4740_IRQ_DMAC, jz4740_dma_irq, 0, "DMA", NULL);
+- if (ret) {
+- printk(KERN_ERR "JZ4740 DMA: Failed to request irq: %d\n", ret);
+- goto err_clkput;
+- }
+-
+- clk_enable(clk);
+-
+- return 0;
+-
+-err_clkput:
+- clk_put(clk);
+-
+-err_iounmap:
+- iounmap(jz4740_dma_base);
+- return ret;
+-}
+-arch_initcall(jz4740_dma_init);
+diff --git a/drivers/dma/dma-jz4740.c b/drivers/dma/dma-jz4740.c
+index 3d42434..b0c0c82 100644
+--- a/drivers/dma/dma-jz4740.c
++++ b/drivers/dma/dma-jz4740.c
+@@ -22,6 +22,8 @@
+ #include <linux/platform_device.h>
+ #include <linux/slab.h>
+ #include <linux/spinlock.h>
++#include <linux/irq.h>
++#include <linux/clk.h>
+
+ #include <asm/mach-jz4740/dma.h>
+
+@@ -29,6 +31,76 @@
+
+ #define JZ_DMA_NR_CHANS 6
+
++#define JZ_REG_DMA_SRC_ADDR(x) (0x00 + (x) * 0x20)
++#define JZ_REG_DMA_DST_ADDR(x) (0x04 + (x) * 0x20)
++#define JZ_REG_DMA_TRANSFER_COUNT(x) (0x08 + (x) * 0x20)
++#define JZ_REG_DMA_REQ_TYPE(x) (0x0C + (x) * 0x20)
++#define JZ_REG_DMA_STATUS_CTRL(x) (0x10 + (x) * 0x20)
++#define JZ_REG_DMA_CMD(x) (0x14 + (x) * 0x20)
++#define JZ_REG_DMA_DESC_ADDR(x) (0x18 + (x) * 0x20)
++
++#define JZ_REG_DMA_CTRL 0x300
++#define JZ_REG_DMA_IRQ 0x304
++#define JZ_REG_DMA_DOORBELL 0x308
++#define JZ_REG_DMA_DOORBELL_SET 0x30C
++
++#define JZ_DMA_STATUS_CTRL_NO_DESC BIT(31)
++#define JZ_DMA_STATUS_CTRL_DESC_INV BIT(6)
++#define JZ_DMA_STATUS_CTRL_ADDR_ERR BIT(4)
++#define JZ_DMA_STATUS_CTRL_TRANSFER_DONE BIT(3)
++#define JZ_DMA_STATUS_CTRL_HALT BIT(2)
++#define JZ_DMA_STATUS_CTRL_COUNT_TERMINATE BIT(1)
++#define JZ_DMA_STATUS_CTRL_ENABLE BIT(0)
++
++#define JZ_DMA_CMD_SRC_INC BIT(23)
++#define JZ_DMA_CMD_DST_INC BIT(22)
++#define JZ_DMA_CMD_RDIL_MASK (0xf << 16)
++#define JZ_DMA_CMD_SRC_WIDTH_MASK (0x3 << 14)
++#define JZ_DMA_CMD_DST_WIDTH_MASK (0x3 << 12)
++#define JZ_DMA_CMD_INTERVAL_LENGTH_MASK (0x7 << 8)
++#define JZ_DMA_CMD_BLOCK_MODE BIT(7)
++#define JZ_DMA_CMD_DESC_VALID BIT(4)
++#define JZ_DMA_CMD_DESC_VALID_MODE BIT(3)
++#define JZ_DMA_CMD_VALID_IRQ_ENABLE BIT(2)
++#define JZ_DMA_CMD_TRANSFER_IRQ_ENABLE BIT(1)
++#define JZ_DMA_CMD_LINK_ENABLE BIT(0)
++
++#define JZ_DMA_CMD_FLAGS_OFFSET 22
++#define JZ_DMA_CMD_RDIL_OFFSET 16
++#define JZ_DMA_CMD_SRC_WIDTH_OFFSET 14
++#define JZ_DMA_CMD_DST_WIDTH_OFFSET 12
++#define JZ_DMA_CMD_TRANSFER_SIZE_OFFSET 8
++#define JZ_DMA_CMD_MODE_OFFSET 7
++
++#define JZ_DMA_CTRL_PRIORITY_MASK (0x3 << 8)
++#define JZ_DMA_CTRL_HALT BIT(3)
++#define JZ_DMA_CTRL_ADDRESS_ERROR BIT(2)
++#define JZ_DMA_CTRL_ENABLE BIT(0)
++
++enum jz4740_dma_width {
++ JZ4740_DMA_WIDTH_32BIT = 0,
++ JZ4740_DMA_WIDTH_8BIT = 1,
++ JZ4740_DMA_WIDTH_16BIT = 2,
++};
++
++enum jz4740_dma_transfer_size {
++ JZ4740_DMA_TRANSFER_SIZE_4BYTE = 0,
++ JZ4740_DMA_TRANSFER_SIZE_1BYTE = 1,
++ JZ4740_DMA_TRANSFER_SIZE_2BYTE = 2,
++ JZ4740_DMA_TRANSFER_SIZE_16BYTE = 3,
++ JZ4740_DMA_TRANSFER_SIZE_32BYTE = 4,
++};
++
++enum jz4740_dma_flags {
++ JZ4740_DMA_SRC_AUTOINC = 0x2,
++ JZ4740_DMA_DST_AUTOINC = 0x1,
++};
++
++enum jz4740_dma_mode {
++ JZ4740_DMA_MODE_SINGLE = 0,
++ JZ4740_DMA_MODE_BLOCK = 1,
++};
++
+ struct jz4740_dma_sg {
+ dma_addr_t addr;
+ unsigned int len;
+@@ -46,9 +118,10 @@ struct jz4740_dma_desc {
+
+ struct jz4740_dmaengine_chan {
+ struct virt_dma_chan vchan;
+- struct jz4740_dma_chan *jz_chan;
++ unsigned int id;
+
+ dma_addr_t fifo_addr;
++ unsigned int transfer_shift;
+
+ struct jz4740_dma_desc *desc;
+ unsigned int next_sg;
+@@ -56,10 +129,19 @@ struct jz4740_dmaengine_chan {
+
+ struct jz4740_dma_dev {
+ struct dma_device ddev;
++ void __iomem *base;
++ struct clk *clk;
+
+ struct jz4740_dmaengine_chan chan[JZ_DMA_NR_CHANS];
+ };
+
++static struct jz4740_dma_dev *jz4740_dma_chan_get_dev(
++ struct jz4740_dmaengine_chan *chan)
++{
++ return container_of(chan->vchan.chan.device, struct jz4740_dma_dev,
++ ddev);
++}
++
+ static struct jz4740_dmaengine_chan *to_jz4740_dma_chan(struct dma_chan *c)
+ {
+ return container_of(c, struct jz4740_dmaengine_chan, vchan.chan);
+@@ -70,6 +152,29 @@ static struct jz4740_dma_desc *to_jz4740_dma_desc(struct virt_dma_desc *vdesc)
+ return container_of(vdesc, struct jz4740_dma_desc, vdesc);
+ }
+
++static inline uint32_t jz4740_dma_read(struct jz4740_dma_dev *dmadev,
++ unsigned int reg)
++{
++ return readl(dmadev->base + reg);
++}
++
++static inline void jz4740_dma_write(struct jz4740_dma_dev *dmadev,
++ unsigned reg, uint32_t val)
++{
++ writel(val, dmadev->base + reg);
++}
++
++static inline void jz4740_dma_write_mask(struct jz4740_dma_dev *dmadev,
++ unsigned int reg, uint32_t val, uint32_t mask)
++{
++ uint32_t tmp;
++
++ tmp = jz4740_dma_read(dmadev, reg);
++ tmp &= ~mask;
++ tmp |= val;
++ jz4740_dma_write(dmadev, reg, tmp);
++}
++
+ static struct jz4740_dma_desc *jz4740_dma_alloc_desc(unsigned int num_sgs)
+ {
+ return kzalloc(sizeof(struct jz4740_dma_desc) +
+@@ -108,30 +213,60 @@ static int jz4740_dma_slave_config(struct dma_chan *c,
+ const struct dma_slave_config *config)
+ {
+ struct jz4740_dmaengine_chan *chan = to_jz4740_dma_chan(c);
+- struct jz4740_dma_config jzcfg;
++ struct jz4740_dma_dev *dmadev = jz4740_dma_chan_get_dev(chan);
++ enum jz4740_dma_width src_width;
++ enum jz4740_dma_width dst_width;
++ enum jz4740_dma_transfer_size transfer_size;
++ enum jz4740_dma_flags flags;
++ uint32_t cmd;
+
+ switch (config->direction) {
+ case DMA_MEM_TO_DEV:
+- jzcfg.flags = JZ4740_DMA_SRC_AUTOINC;
+- jzcfg.transfer_size = jz4740_dma_maxburst(config->dst_maxburst);
++ flags = JZ4740_DMA_SRC_AUTOINC;
++ transfer_size = jz4740_dma_maxburst(config->dst_maxburst);
+ chan->fifo_addr = config->dst_addr;
+ break;
+ case DMA_DEV_TO_MEM:
+- jzcfg.flags = JZ4740_DMA_DST_AUTOINC;
+- jzcfg.transfer_size = jz4740_dma_maxburst(config->src_maxburst);
++ flags = JZ4740_DMA_DST_AUTOINC;
++ transfer_size = jz4740_dma_maxburst(config->src_maxburst);
+ chan->fifo_addr = config->src_addr;
+ break;
+ default:
+ return -EINVAL;
+ }
+
++ src_width = jz4740_dma_width(config->src_addr_width);
++ dst_width = jz4740_dma_width(config->dst_addr_width);
++
++ switch (transfer_size) {
++ case JZ4740_DMA_TRANSFER_SIZE_2BYTE:
++ chan->transfer_shift = 1;
++ break;
++ case JZ4740_DMA_TRANSFER_SIZE_4BYTE:
++ chan->transfer_shift = 2;
++ break;
++ case JZ4740_DMA_TRANSFER_SIZE_16BYTE:
++ chan->transfer_shift = 4;
++ break;
++ case JZ4740_DMA_TRANSFER_SIZE_32BYTE:
++ chan->transfer_shift = 5;
++ break;
++ default:
++ chan->transfer_shift = 0;
++ break;
++ }
+
+- jzcfg.src_width = jz4740_dma_width(config->src_addr_width);
+- jzcfg.dst_width = jz4740_dma_width(config->dst_addr_width);
+- jzcfg.mode = JZ4740_DMA_MODE_SINGLE;
+- jzcfg.request_type = config->slave_id;
++ cmd = flags << JZ_DMA_CMD_FLAGS_OFFSET;
++ cmd |= src_width << JZ_DMA_CMD_SRC_WIDTH_OFFSET;
++ cmd |= dst_width << JZ_DMA_CMD_DST_WIDTH_OFFSET;
++ cmd |= transfer_size << JZ_DMA_CMD_TRANSFER_SIZE_OFFSET;
++ cmd |= JZ4740_DMA_MODE_SINGLE << JZ_DMA_CMD_MODE_OFFSET;
++ cmd |= JZ_DMA_CMD_TRANSFER_IRQ_ENABLE;
+
+- jz4740_dma_configure(chan->jz_chan, &jzcfg);
++ jz4740_dma_write(dmadev, JZ_REG_DMA_CMD(chan->id), cmd);
++ jz4740_dma_write(dmadev, JZ_REG_DMA_STATUS_CTRL(chan->id), 0);
++ jz4740_dma_write(dmadev, JZ_REG_DMA_REQ_TYPE(chan->id),
++ config->slave_id);
+
+ return 0;
+ }
+@@ -139,11 +274,13 @@ static int jz4740_dma_slave_config(struct dma_chan *c,
+ static int jz4740_dma_terminate_all(struct dma_chan *c)
+ {
+ struct jz4740_dmaengine_chan *chan = to_jz4740_dma_chan(c);
++ struct jz4740_dma_dev *dmadev = jz4740_dma_chan_get_dev(chan);
+ unsigned long flags;
+ LIST_HEAD(head);
+
+ spin_lock_irqsave(&chan->vchan.lock, flags);
+- jz4740_dma_disable(chan->jz_chan);
++ jz4740_dma_write_mask(dmadev, JZ_REG_DMA_STATUS_CTRL(chan->id), 0,
++ JZ_DMA_STATUS_CTRL_ENABLE);
+ chan->desc = NULL;
+ vchan_get_all_descriptors(&chan->vchan, &head);
+ spin_unlock_irqrestore(&chan->vchan.lock, flags);
+@@ -170,11 +307,13 @@ static int jz4740_dma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
+
+ static int jz4740_dma_start_transfer(struct jz4740_dmaengine_chan *chan)
+ {
++ struct jz4740_dma_dev *dmadev = jz4740_dma_chan_get_dev(chan);
+ dma_addr_t src_addr, dst_addr;
+ struct virt_dma_desc *vdesc;
+ struct jz4740_dma_sg *sg;
+
+- jz4740_dma_disable(chan->jz_chan);
++ jz4740_dma_write_mask(dmadev, JZ_REG_DMA_STATUS_CTRL(chan->id), 0,
++ JZ_DMA_STATUS_CTRL_ENABLE);
+
+ if (!chan->desc) {
+ vdesc = vchan_next_desc(&chan->vchan);
+@@ -196,22 +335,27 @@ static int jz4740_dma_start_transfer(struct jz4740_dmaengine_chan *chan)
+ src_addr = chan->fifo_addr;
+ dst_addr = sg->addr;
+ }
+- jz4740_dma_set_src_addr(chan->jz_chan, src_addr);
+- jz4740_dma_set_dst_addr(chan->jz_chan, dst_addr);
+- jz4740_dma_set_transfer_count(chan->jz_chan, sg->len);
++ jz4740_dma_write(dmadev, JZ_REG_DMA_SRC_ADDR(chan->id), src_addr);
++ jz4740_dma_write(dmadev, JZ_REG_DMA_DST_ADDR(chan->id), dst_addr);
++ jz4740_dma_write(dmadev, JZ_REG_DMA_TRANSFER_COUNT(chan->id),
++ sg->len >> chan->transfer_shift);
+
+ chan->next_sg++;
+
+- jz4740_dma_enable(chan->jz_chan);
++ jz4740_dma_write_mask(dmadev, JZ_REG_DMA_STATUS_CTRL(chan->id),
++ JZ_DMA_STATUS_CTRL_NO_DESC | JZ_DMA_STATUS_CTRL_ENABLE,
++ JZ_DMA_STATUS_CTRL_HALT | JZ_DMA_STATUS_CTRL_NO_DESC |
++ JZ_DMA_STATUS_CTRL_ENABLE);
++
++ jz4740_dma_write_mask(dmadev, JZ_REG_DMA_CTRL,
++ JZ_DMA_CTRL_ENABLE,
++ JZ_DMA_CTRL_HALT | JZ_DMA_CTRL_ENABLE);
+
+ return 0;
+ }
+
+-static void jz4740_dma_complete_cb(struct jz4740_dma_chan *jz_chan, int error,
+- void *devid)
++static void jz4740_dma_chan_irq(struct jz4740_dmaengine_chan *chan)
+ {
+- struct jz4740_dmaengine_chan *chan = devid;
+-
+ spin_lock(&chan->vchan.lock);
+ if (chan->desc) {
+ if (chan->desc && chan->desc->cyclic) {
+@@ -227,6 +371,28 @@ static void jz4740_dma_complete_cb(struct jz4740_dma_chan *jz_chan, int error,
+ spin_unlock(&chan->vchan.lock);
+ }
+
++static irqreturn_t jz4740_dma_irq(int irq, void *devid)
++{
++ struct jz4740_dma_dev *dmadev = devid;
++ uint32_t irq_status;
++ unsigned int i;
++
++ irq_status = readl(dmadev->base + JZ_REG_DMA_IRQ);
++
++ for (i = 0; i < 6; ++i) {
++ if (irq_status & (1 << i)) {
++ jz4740_dma_write_mask(dmadev,
++ JZ_REG_DMA_STATUS_CTRL(i), 0,
++ JZ_DMA_STATUS_CTRL_ENABLE |
++ JZ_DMA_STATUS_CTRL_TRANSFER_DONE);
++
++ jz4740_dma_chan_irq(&dmadev->chan[i]);
++ }
++ }
++
++ return IRQ_HANDLED;
++}
++
+ static void jz4740_dma_issue_pending(struct dma_chan *c)
+ {
+ struct jz4740_dmaengine_chan *chan = to_jz4740_dma_chan(c);
+@@ -298,7 +464,8 @@ static struct dma_async_tx_descriptor *jz4740_dma_prep_dma_cyclic(
+ static size_t jz4740_dma_desc_residue(struct jz4740_dmaengine_chan *chan,
+ struct jz4740_dma_desc *desc, unsigned int next_sg)
+ {
+- size_t residue = 0;
++ struct jz4740_dma_dev *dmadev = jz4740_dma_chan_get_dev(chan);
++ unsigned int residue, count;
+ unsigned int i;
+
+ residue = 0;
+@@ -306,8 +473,11 @@ static size_t jz4740_dma_desc_residue(struct jz4740_dmaengine_chan *chan,
+ for (i = next_sg; i < desc->num_sgs; i++)
+ residue += desc->sg[i].len;
+
+- if (next_sg != 0)
+- residue += jz4740_dma_get_residue(chan->jz_chan);
++ if (next_sg != 0) {
++ count = jz4740_dma_read(dmadev,
++ JZ_REG_DMA_TRANSFER_COUNT(chan->id));
++ residue += count << chan->transfer_shift;
++ }
+
+ return residue;
+ }
+@@ -342,24 +512,12 @@ static enum dma_status jz4740_dma_tx_status(struct dma_chan *c,
+
+ static int jz4740_dma_alloc_chan_resources(struct dma_chan *c)
+ {
+- struct jz4740_dmaengine_chan *chan = to_jz4740_dma_chan(c);
+-
+- chan->jz_chan = jz4740_dma_request(chan, NULL);
+- if (!chan->jz_chan)
+- return -EBUSY;
+-
+- jz4740_dma_set_complete_cb(chan->jz_chan, jz4740_dma_complete_cb);
+-
+ return 0;
+ }
+
+ static void jz4740_dma_free_chan_resources(struct dma_chan *c)
+ {
+- struct jz4740_dmaengine_chan *chan = to_jz4740_dma_chan(c);
+-
+- vchan_free_chan_resources(&chan->vchan);
+- jz4740_dma_free(chan->jz_chan);
+- chan->jz_chan = NULL;
++ vchan_free_chan_resources(to_virt_chan(c));
+ }
+
+ static void jz4740_dma_desc_free(struct virt_dma_desc *vdesc)
+@@ -373,7 +531,9 @@ static int jz4740_dma_probe(struct platform_device *pdev)
+ struct jz4740_dma_dev *dmadev;
+ struct dma_device *dd;
+ unsigned int i;
++ struct resource *res;
+ int ret;
++ int irq;
+
+ dmadev = devm_kzalloc(&pdev->dev, sizeof(*dmadev), GFP_KERNEL);
+ if (!dmadev)
+@@ -381,6 +541,17 @@ static int jz4740_dma_probe(struct platform_device *pdev)
+
+ dd = &dmadev->ddev;
+
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ dmadev->base = devm_ioremap_resource(&pdev->dev, res);
++ if (IS_ERR(dmadev->base))
++ return PTR_ERR(dmadev->base);
++
++ dmadev->clk = clk_get(&pdev->dev, "dma");
++ if (IS_ERR(dmadev->clk))
++ return PTR_ERR(dmadev->clk);
++
++ clk_prepare_enable(dmadev->clk);
++
+ dma_cap_set(DMA_SLAVE, dd->cap_mask);
+ dma_cap_set(DMA_CYCLIC, dd->cap_mask);
+ dd->device_alloc_chan_resources = jz4740_dma_alloc_chan_resources;
+@@ -396,6 +567,7 @@ static int jz4740_dma_probe(struct platform_device *pdev)
+
+ for (i = 0; i < dd->chancnt; i++) {
+ chan = &dmadev->chan[i];
++ chan->id = i;
+ chan->vchan.desc_free = jz4740_dma_desc_free;
+ vchan_init(&chan->vchan, dd);
+ }
+@@ -404,16 +576,28 @@ static int jz4740_dma_probe(struct platform_device *pdev)
+ if (ret)
+ return ret;
+
++ irq = platform_get_irq(pdev, 0);
++ ret = request_irq(irq, jz4740_dma_irq, 0, dev_name(&pdev->dev), dmadev);
++ if (ret)
++ goto err_unregister;
++
+ platform_set_drvdata(pdev, dmadev);
+
+ return 0;
++
++err_unregister:
++ dma_async_device_unregister(dd);
++ return ret;
+ }
+
+ static int jz4740_dma_remove(struct platform_device *pdev)
+ {
+ struct jz4740_dma_dev *dmadev = platform_get_drvdata(pdev);
++ int irq = platform_get_irq(pdev, 0);
+
++ free_irq(irq, dmadev);
+ dma_async_device_unregister(&dmadev->ddev);
++ clk_disable_unprepare(dmadev->clk);
+
+ return 0;
+ }
+--
+1.7.10.4
+
diff --git a/target/linux/xburst/patches-3.10/016-ASoC-jz4740-Use-the-generic-dmaengine-PCM-driver.patch b/target/linux/xburst/patches-3.10/016-ASoC-jz4740-Use-the-generic-dmaengine-PCM-driver.patch
new file mode 100644
index 0000000000..296d5cccd1
--- /dev/null
+++ b/target/linux/xburst/patches-3.10/016-ASoC-jz4740-Use-the-generic-dmaengine-PCM-driver.patch
@@ -0,0 +1,519 @@
+From a20f54fdd500e5bccc9bd1ca4ac9f150addf2e64 Mon Sep 17 00:00:00 2001
+From: Lars-Peter Clausen <lars@metafoo.de>
+Date: Sat, 27 Apr 2013 21:26:30 +0200
+Subject: [PATCH 16/16] ASoC: jz4740: Use the generic dmaengine PCM driver
+
+Since there is a dmaengine driver for the jz4740 DMA controller now we can use
+the generic dmaengine PCM driver instead of a custom one.
+
+Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
+Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
+---
+ sound/soc/jz4740/Kconfig | 1 +
+ sound/soc/jz4740/jz4740-i2s.c | 48 +++----
+ sound/soc/jz4740/jz4740-pcm.c | 310 ++---------------------------------------
+ sound/soc/jz4740/jz4740-pcm.h | 20 ---
+ 4 files changed, 27 insertions(+), 352 deletions(-)
+ delete mode 100644 sound/soc/jz4740/jz4740-pcm.h
+
+diff --git a/sound/soc/jz4740/Kconfig b/sound/soc/jz4740/Kconfig
+index 5351cba..29f76af 100644
+--- a/sound/soc/jz4740/Kconfig
++++ b/sound/soc/jz4740/Kconfig
+@@ -1,6 +1,7 @@
+ config SND_JZ4740_SOC
+ tristate "SoC Audio for Ingenic JZ4740 SoC"
+ depends on MACH_JZ4740 && SND_SOC
++ select SND_SOC_GENERIC_DMAENGINE_PCM
+ help
+ Say Y or M if you want to add support for codecs attached to
+ the JZ4740 I2S interface. You will also need to select the audio
+diff --git a/sound/soc/jz4740/jz4740-i2s.c b/sound/soc/jz4740/jz4740-i2s.c
+index 9a12644..5d04134 100644
+--- a/sound/soc/jz4740/jz4740-i2s.c
++++ b/sound/soc/jz4740/jz4740-i2s.c
+@@ -29,9 +29,12 @@
+ #include <sound/pcm_params.h>
+ #include <sound/soc.h>
+ #include <sound/initval.h>
++#include <sound/dmaengine_pcm.h>
++
++#include <asm/mach-jz4740/dma.h>
+
+ #include "jz4740-i2s.h"
+-#include "jz4740-pcm.h"
++
+
+ #define JZ_REG_AIC_CONF 0x00
+ #define JZ_REG_AIC_CTRL 0x04
+@@ -89,8 +92,8 @@ struct jz4740_i2s {
+ struct clk *clk_aic;
+ struct clk *clk_i2s;
+
+- struct jz4740_pcm_config pcm_config_playback;
+- struct jz4740_pcm_config pcm_config_capture;
++ struct snd_dmaengine_dai_dma_data playback_dma_data;
++ struct snd_dmaengine_dai_dma_data capture_dma_data;
+ };
+
+ static inline uint32_t jz4740_i2s_read(const struct jz4740_i2s *i2s,
+@@ -233,8 +236,6 @@ static int jz4740_i2s_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params, struct snd_soc_dai *dai)
+ {
+ struct jz4740_i2s *i2s = snd_soc_dai_get_drvdata(dai);
+- enum jz4740_dma_width dma_width;
+- struct jz4740_pcm_config *pcm_config;
+ unsigned int sample_size;
+ uint32_t ctrl;
+
+@@ -243,11 +244,9 @@ static int jz4740_i2s_hw_params(struct snd_pcm_substream *substream,
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S8:
+ sample_size = 0;
+- dma_width = JZ4740_DMA_WIDTH_8BIT;
+ break;
+ case SNDRV_PCM_FORMAT_S16:
+ sample_size = 1;
+- dma_width = JZ4740_DMA_WIDTH_16BIT;
+ break;
+ default:
+ return -EINVAL;
+@@ -260,22 +259,13 @@ static int jz4740_i2s_hw_params(struct snd_pcm_substream *substream,
+ ctrl |= JZ_AIC_CTRL_MONO_TO_STEREO;
+ else
+ ctrl &= ~JZ_AIC_CTRL_MONO_TO_STEREO;
+-
+- pcm_config = &i2s->pcm_config_playback;
+- pcm_config->dma_config.dst_width = dma_width;
+-
+ } else {
+ ctrl &= ~JZ_AIC_CTRL_INPUT_SAMPLE_SIZE_MASK;
+ ctrl |= sample_size << JZ_AIC_CTRL_INPUT_SAMPLE_SIZE_OFFSET;
+-
+- pcm_config = &i2s->pcm_config_capture;
+- pcm_config->dma_config.src_width = dma_width;
+ }
+
+ jz4740_i2s_write(i2s, JZ_REG_AIC_CTRL, ctrl);
+
+- snd_soc_dai_set_dma_data(dai, substream, pcm_config);
+-
+ return 0;
+ }
+
+@@ -342,25 +332,19 @@ static int jz4740_i2s_resume(struct snd_soc_dai *dai)
+
+ static void jz4740_i2c_init_pcm_config(struct jz4740_i2s *i2s)
+ {
+- struct jz4740_dma_config *dma_config;
++ struct snd_dmaengine_dai_dma_data *dma_data;
+
+ /* Playback */
+- dma_config = &i2s->pcm_config_playback.dma_config;
+- dma_config->src_width = JZ4740_DMA_WIDTH_32BIT;
+- dma_config->transfer_size = JZ4740_DMA_TRANSFER_SIZE_16BYTE;
+- dma_config->request_type = JZ4740_DMA_TYPE_AIC_TRANSMIT;
+- dma_config->flags = JZ4740_DMA_SRC_AUTOINC;
+- dma_config->mode = JZ4740_DMA_MODE_SINGLE;
+- i2s->pcm_config_playback.fifo_addr = i2s->phys_base + JZ_REG_AIC_FIFO;
++ dma_data = &i2s->playback_dma_data;
++ dma_data->maxburst = 16;
++ dma_data->slave_id = JZ4740_DMA_TYPE_AIC_TRANSMIT;
++ dma_data->addr = i2s->phys_base + JZ_REG_AIC_FIFO;
+
+ /* Capture */
+- dma_config = &i2s->pcm_config_capture.dma_config;
+- dma_config->dst_width = JZ4740_DMA_WIDTH_32BIT;
+- dma_config->transfer_size = JZ4740_DMA_TRANSFER_SIZE_16BYTE;
+- dma_config->request_type = JZ4740_DMA_TYPE_AIC_RECEIVE;
+- dma_config->flags = JZ4740_DMA_DST_AUTOINC;
+- dma_config->mode = JZ4740_DMA_MODE_SINGLE;
+- i2s->pcm_config_capture.fifo_addr = i2s->phys_base + JZ_REG_AIC_FIFO;
++ dma_data = &i2s->capture_dma_data;
++ dma_data->maxburst = 16;
++ dma_data->slave_id = JZ4740_DMA_TYPE_AIC_RECEIVE;
++ dma_data->addr = i2s->phys_base + JZ_REG_AIC_FIFO;
+ }
+
+ static int jz4740_i2s_dai_probe(struct snd_soc_dai *dai)
+@@ -371,6 +355,8 @@ static int jz4740_i2s_dai_probe(struct snd_soc_dai *dai)
+ clk_enable(i2s->clk_aic);
+
+ jz4740_i2c_init_pcm_config(i2s);
++ dai->playback_dma_data = &i2s->playback_dma_data;
++ dai->capture_dma_data = &i2s->capture_dma_data;
+
+ conf = (7 << JZ_AIC_CONF_FIFO_RX_THRESHOLD_OFFSET) |
+ (8 << JZ_AIC_CONF_FIFO_TX_THRESHOLD_OFFSET) |
+diff --git a/sound/soc/jz4740/jz4740-pcm.c b/sound/soc/jz4740/jz4740-pcm.c
+index 7100592..79fcade 100644
+--- a/sound/soc/jz4740/jz4740-pcm.c
++++ b/sound/soc/jz4740/jz4740-pcm.c
+@@ -19,38 +19,14 @@
+ #include <linux/platform_device.h>
+ #include <linux/slab.h>
+
+-#include <linux/dma-mapping.h>
++#include <sound/dmaengine_pcm.h>
+
+-#include <sound/core.h>
+-#include <sound/pcm.h>
+-#include <sound/pcm_params.h>
+-#include <sound/soc.h>
+-
+-#include <asm/mach-jz4740/dma.h>
+-#include "jz4740-pcm.h"
+-
+-struct jz4740_runtime_data {
+- unsigned long dma_period;
+- dma_addr_t dma_start;
+- dma_addr_t dma_pos;
+- dma_addr_t dma_end;
+-
+- struct jz4740_dma_chan *dma;
+-
+- dma_addr_t fifo_addr;
+-};
+-
+-/* identify hardware playback capabilities */
+ static const struct snd_pcm_hardware jz4740_pcm_hardware = {
+ .info = SNDRV_PCM_INFO_MMAP |
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_BLOCK_TRANSFER,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S8,
+-
+- .rates = SNDRV_PCM_RATE_8000_48000,
+- .channels_min = 1,
+- .channels_max = 2,
+ .period_bytes_min = 16,
+ .period_bytes_max = 2 * PAGE_SIZE,
+ .periods_min = 2,
+@@ -59,290 +35,22 @@ static const struct snd_pcm_hardware jz4740_pcm_hardware = {
+ .fifo_size = 32,
+ };
+
+-static void jz4740_pcm_start_transfer(struct jz4740_runtime_data *prtd,
+- struct snd_pcm_substream *substream)
+-{
+- unsigned long count;
+-
+- if (prtd->dma_pos == prtd->dma_end)
+- prtd->dma_pos = prtd->dma_start;
+-
+- if (prtd->dma_pos + prtd->dma_period > prtd->dma_end)
+- count = prtd->dma_end - prtd->dma_pos;
+- else
+- count = prtd->dma_period;
+-
+- jz4740_dma_disable(prtd->dma);
+-
+- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+- jz4740_dma_set_src_addr(prtd->dma, prtd->dma_pos);
+- jz4740_dma_set_dst_addr(prtd->dma, prtd->fifo_addr);
+- } else {
+- jz4740_dma_set_src_addr(prtd->dma, prtd->fifo_addr);
+- jz4740_dma_set_dst_addr(prtd->dma, prtd->dma_pos);
+- }
+-
+- jz4740_dma_set_transfer_count(prtd->dma, count);
+-
+- prtd->dma_pos += count;
+-
+- jz4740_dma_enable(prtd->dma);
+-}
+-
+-static void jz4740_pcm_dma_transfer_done(struct jz4740_dma_chan *dma, int err,
+- void *dev_id)
+-{
+- struct snd_pcm_substream *substream = dev_id;
+- struct snd_pcm_runtime *runtime = substream->runtime;
+- struct jz4740_runtime_data *prtd = runtime->private_data;
+-
+- snd_pcm_period_elapsed(substream);
+-
+- jz4740_pcm_start_transfer(prtd, substream);
+-}
+-
+-static int jz4740_pcm_hw_params(struct snd_pcm_substream *substream,
+- struct snd_pcm_hw_params *params)
+-{
+- struct snd_pcm_runtime *runtime = substream->runtime;
+- struct jz4740_runtime_data *prtd = runtime->private_data;
+- struct snd_soc_pcm_runtime *rtd = substream->private_data;
+- struct jz4740_pcm_config *config;
+-
+- config = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
+-
+- if (!config)
+- return 0;
+-
+- if (!prtd->dma) {
+- if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
+- prtd->dma = jz4740_dma_request(substream, "PCM Capture");
+- else
+- prtd->dma = jz4740_dma_request(substream, "PCM Playback");
+- }
+-
+- if (!prtd->dma)
+- return -EBUSY;
+-
+- jz4740_dma_configure(prtd->dma, &config->dma_config);
+- prtd->fifo_addr = config->fifo_addr;
+-
+- jz4740_dma_set_complete_cb(prtd->dma, jz4740_pcm_dma_transfer_done);
+-
+- snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
+- runtime->dma_bytes = params_buffer_bytes(params);
+-
+- prtd->dma_period = params_period_bytes(params);
+- prtd->dma_start = runtime->dma_addr;
+- prtd->dma_pos = prtd->dma_start;
+- prtd->dma_end = prtd->dma_start + runtime->dma_bytes;
+-
+- return 0;
+-}
+-
+-static int jz4740_pcm_hw_free(struct snd_pcm_substream *substream)
+-{
+- struct jz4740_runtime_data *prtd = substream->runtime->private_data;
+-
+- snd_pcm_set_runtime_buffer(substream, NULL);
+- if (prtd->dma) {
+- jz4740_dma_free(prtd->dma);
+- prtd->dma = NULL;
+- }
+-
+- return 0;
+-}
+-
+-static int jz4740_pcm_prepare(struct snd_pcm_substream *substream)
+-{
+- struct jz4740_runtime_data *prtd = substream->runtime->private_data;
+-
+- if (!prtd->dma)
+- return -EBUSY;
+-
+- prtd->dma_pos = prtd->dma_start;
+-
+- return 0;
+-}
+-
+-static int jz4740_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
+-{
+- struct snd_pcm_runtime *runtime = substream->runtime;
+- struct jz4740_runtime_data *prtd = runtime->private_data;
+-
+- switch (cmd) {
+- case SNDRV_PCM_TRIGGER_START:
+- case SNDRV_PCM_TRIGGER_RESUME:
+- case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+- jz4740_pcm_start_transfer(prtd, substream);
+- break;
+- case SNDRV_PCM_TRIGGER_STOP:
+- case SNDRV_PCM_TRIGGER_SUSPEND:
+- case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+- jz4740_dma_disable(prtd->dma);
+- break;
+- default:
+- break;
+- }
+-
+- return 0;
+-}
+-
+-static snd_pcm_uframes_t jz4740_pcm_pointer(struct snd_pcm_substream *substream)
+-{
+- struct snd_pcm_runtime *runtime = substream->runtime;
+- struct jz4740_runtime_data *prtd = runtime->private_data;
+- unsigned long byte_offset;
+- snd_pcm_uframes_t offset;
+- struct jz4740_dma_chan *dma = prtd->dma;
+-
+- /* prtd->dma_pos points to the end of the current transfer. So by
+- * subtracting prdt->dma_start we get the offset to the end of the
+- * current period in bytes. By subtracting the residue of the transfer
+- * we get the current offset in bytes. */
+- byte_offset = prtd->dma_pos - prtd->dma_start;
+- byte_offset -= jz4740_dma_get_residue(dma);
+-
+- offset = bytes_to_frames(runtime, byte_offset);
+- if (offset >= runtime->buffer_size)
+- offset = 0;
+-
+- return offset;
+-}
+-
+-static int jz4740_pcm_open(struct snd_pcm_substream *substream)
+-{
+- struct snd_pcm_runtime *runtime = substream->runtime;
+- struct jz4740_runtime_data *prtd;
+-
+- prtd = kzalloc(sizeof(*prtd), GFP_KERNEL);
+- if (prtd == NULL)
+- return -ENOMEM;
+-
+- snd_soc_set_runtime_hwparams(substream, &jz4740_pcm_hardware);
+-
+- runtime->private_data = prtd;
+-
+- return 0;
+-}
+-
+-static int jz4740_pcm_close(struct snd_pcm_substream *substream)
+-{
+- struct snd_pcm_runtime *runtime = substream->runtime;
+- struct jz4740_runtime_data *prtd = runtime->private_data;
+-
+- kfree(prtd);
+-
+- return 0;
+-}
+-
+-static int jz4740_pcm_mmap(struct snd_pcm_substream *substream,
+- struct vm_area_struct *vma)
+-{
+- return remap_pfn_range(vma, vma->vm_start,
+- substream->dma_buffer.addr >> PAGE_SHIFT,
+- vma->vm_end - vma->vm_start, vma->vm_page_prot);
+-}
+-
+-static struct snd_pcm_ops jz4740_pcm_ops = {
+- .open = jz4740_pcm_open,
+- .close = jz4740_pcm_close,
+- .ioctl = snd_pcm_lib_ioctl,
+- .hw_params = jz4740_pcm_hw_params,
+- .hw_free = jz4740_pcm_hw_free,
+- .prepare = jz4740_pcm_prepare,
+- .trigger = jz4740_pcm_trigger,
+- .pointer = jz4740_pcm_pointer,
+- .mmap = jz4740_pcm_mmap,
+-};
+-
+-static int jz4740_pcm_preallocate_dma_buffer(struct snd_pcm *pcm, int stream)
+-{
+- struct snd_pcm_substream *substream = pcm->streams[stream].substream;
+- struct snd_dma_buffer *buf = &substream->dma_buffer;
+- size_t size = jz4740_pcm_hardware.buffer_bytes_max;
+-
+- buf->dev.type = SNDRV_DMA_TYPE_DEV;
+- buf->dev.dev = pcm->card->dev;
+- buf->private_data = NULL;
+-
+- buf->area = dma_alloc_noncoherent(pcm->card->dev, size,
+- &buf->addr, GFP_KERNEL);
+- if (!buf->area)
+- return -ENOMEM;
+-
+- buf->bytes = size;
+-
+- return 0;
+-}
+-
+-static void jz4740_pcm_free(struct snd_pcm *pcm)
+-{
+- struct snd_pcm_substream *substream;
+- struct snd_dma_buffer *buf;
+- int stream;
+-
+- for (stream = 0; stream < SNDRV_PCM_STREAM_LAST; ++stream) {
+- substream = pcm->streams[stream].substream;
+- if (!substream)
+- continue;
+-
+- buf = &substream->dma_buffer;
+- if (!buf->area)
+- continue;
+-
+- dma_free_noncoherent(pcm->card->dev, buf->bytes, buf->area,
+- buf->addr);
+- buf->area = NULL;
+- }
+-}
+-
+-static u64 jz4740_pcm_dmamask = DMA_BIT_MASK(32);
+-
+-static int jz4740_pcm_new(struct snd_soc_pcm_runtime *rtd)
+-{
+- struct snd_card *card = rtd->card->snd_card;
+- struct snd_pcm *pcm = rtd->pcm;
+- int ret = 0;
+-
+- if (!card->dev->dma_mask)
+- card->dev->dma_mask = &jz4740_pcm_dmamask;
+-
+- if (!card->dev->coherent_dma_mask)
+- card->dev->coherent_dma_mask = DMA_BIT_MASK(32);
+-
+- if (pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream) {
+- ret = jz4740_pcm_preallocate_dma_buffer(pcm,
+- SNDRV_PCM_STREAM_PLAYBACK);
+- if (ret)
+- goto err;
+- }
+-
+- if (pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream) {
+- ret = jz4740_pcm_preallocate_dma_buffer(pcm,
+- SNDRV_PCM_STREAM_CAPTURE);
+- if (ret)
+- goto err;
+- }
+-
+-err:
+- return ret;
+-}
+-
+-static struct snd_soc_platform_driver jz4740_soc_platform = {
+- .ops = &jz4740_pcm_ops,
+- .pcm_new = jz4740_pcm_new,
+- .pcm_free = jz4740_pcm_free,
++static const struct snd_dmaengine_pcm_config jz4740_dmaengine_pcm_config = {
++ .prepare_slave_config = snd_dmaengine_pcm_prepare_slave_config,
++ .pcm_hardware = &jz4740_pcm_hardware,
++ .prealloc_buffer_size = 256 * PAGE_SIZE,
+ };
+
+ static int jz4740_pcm_probe(struct platform_device *pdev)
+ {
+- return snd_soc_register_platform(&pdev->dev, &jz4740_soc_platform);
++ return snd_dmaengine_pcm_register(&pdev->dev,
++ &jz4740_dmaengine_pcm_config,
++ SND_DMAENGINE_PCM_FLAG_COMPAT);
+ }
+
+ static int jz4740_pcm_remove(struct platform_device *pdev)
+ {
+- snd_soc_unregister_platform(&pdev->dev);
++ snd_dmaengine_pcm_unregister(&pdev->dev);
+ return 0;
+ }
+
+diff --git a/sound/soc/jz4740/jz4740-pcm.h b/sound/soc/jz4740/jz4740-pcm.h
+deleted file mode 100644
+index 1220cbb..0000000
+--- a/sound/soc/jz4740/jz4740-pcm.h
++++ /dev/null
+@@ -1,20 +0,0 @@
+-/*
+- *
+- * This program is free software; you can redistribute it and/or modify
+- * it under the terms of the GNU General Public License version 2 as
+- * published by the Free Software Foundation.
+- */
+-
+-#ifndef _JZ4740_PCM_H
+-#define _JZ4740_PCM_H
+-
+-#include <linux/dma-mapping.h>
+-#include <asm/mach-jz4740/dma.h>
+-
+-
+-struct jz4740_pcm_config {
+- struct jz4740_dma_config dma_config;
+- phys_addr_t fifo_addr;
+-};
+-
+-#endif
+--
+1.7.10.4
+