aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux')
-rw-r--r--target/linux/lantiq/base-files/etc/uci-defaults/02_network6
-rw-r--r--target/linux/lantiq/dts/P2812HNUFX.dts308
-rw-r--r--target/linux/lantiq/image/Makefile4
-rw-r--r--target/linux/lantiq/xrx200/profiles/zyxel.mk14
4 files changed, 332 insertions, 0 deletions
diff --git a/target/linux/lantiq/base-files/etc/uci-defaults/02_network b/target/linux/lantiq/base-files/etc/uci-defaults/02_network
index 6e17d4dde2..4903eb92d0 100644
--- a/target/linux/lantiq/base-files/etc/uci-defaults/02_network
+++ b/target/linux/lantiq/base-files/etc/uci-defaults/02_network
@@ -109,6 +109,12 @@ P2601HNFX)
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 5t"
;;
+
+P2812HNUFX)
+ ucidef_set_interface_lan 'eth0.1'
+ ucidef_add_switch "switch0" "1" "1"
+ ucidef_add_switch_vlan "switch0" "1" "0 1 2 4 5 6t"
+ ;;
TDW8970)
lan_mac=$(mtd_get_mac_binary boardconfig 61696)
diff --git a/target/linux/lantiq/dts/P2812HNUFX.dts b/target/linux/lantiq/dts/P2812HNUFX.dts
new file mode 100644
index 0000000000..5af10d49f3
--- /dev/null
+++ b/target/linux/lantiq/dts/P2812HNUFX.dts
@@ -0,0 +1,308 @@
+/dts-v1/;
+
+/include/ "vr9.dtsi"
+
+/ {
+ model = "P2812HNUFX - ZyXEL P-2812HNU-Fx";
+
+ chosen {
+ /*bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";*/
+ };
+
+ memory@0 {
+ reg = <0x0 0x8000000>;
+ };
+
+ fpi@10000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "lantiq,fpi", "simple-bus";
+ ranges = <0x0 0x10000000 0xEEFFFFF>;
+ reg = <0x10000000 0xEF00000>;
+
+ localbus@0 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "lantiq,localbus", "simple-bus";
+
+ nand-parts@0 {
+ compatible = "gen_nand", "lantiq,nand-xway";
+ lantiq,cs = <1>;
+ bank-width = <2>;
+ reg = <0 0x0 0x2000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x00000 0x40000>;
+ };
+
+ partition@40000 {
+ label = "u-boot environment";
+ reg = <0x40000 0x20000>;
+ };
+
+ partition@60000 {
+ label = "root";
+ reg = <0x60000 0x7fa0000>;
+ };
+ };
+ };
+
+ gpio: pinmux@E100B10 {
+ compatible = "lantiq,pinctrl-xr9";
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ interrupt-parent = <&icu0>;
+ interrupts = <166 135 66 40 41 42 38>;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+ reg = <0xE100B10 0xA0>;
+
+ state_default: pinmux {
+ mdio {
+ lantiq,groups = "mdio";
+ lantiq,function = "mdio";
+ };
+ gphy-leds {
+ lantiq,groups = "gphy0 led1", "gphy1 led1",
+ "gphy0 led2", "gphy1 led2";
+ lantiq,function = "gphy";
+ lantiq,pull = <2>;
+ lantiq,open-drain = <0>;
+ lantiq,output = <1>;
+ };
+ stp {
+ lantiq,groups = "stp";
+ lantiq,function = "stp";
+ lantiq,pull = <2>;
+ lantiq,open-drain = <0>;
+ lantiq,output = <1>;
+ };
+ pci {
+ lantiq,groups = "gnt1", "req1";
+ lantiq,function = "pci";
+ };
+ pci-rst {
+ lantiq,pins = "io21";
+ lantiq,pull = <0>;
+ lantiq,open-drain = <0>;
+ lantiq,output = <1>;
+ };
+ ifxhcd-rst {
+ lantiq,pins = "io33";
+ lantiq,pull = <0>;
+ lantiq,open-drain = <0>;
+ lantiq,output = <1>;
+ };
+ nand {
+ lantiq,groups = "nand cle", "nand ale",
+ "nand rd", "nand cs1", "nand rdy";
+ lantiq,function = "ebu";
+ lantiq,pull = <1>;
+ };
+ };
+ };
+
+ eth@E108000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "lantiq,xrx200-net";
+ reg = < 0xE108000 0x3000 /* switch */
+ 0xE10B100 0x70 /* mdio */
+ 0xE10B1D8 0x30 /* mii */
+ 0xE10B308 0x30 /* pmac */
+ >;
+ interrupt-parent = <&icu0>;
+ interrupts = <73 72>;
+
+ lan: interface@0 {
+ compatible = "lantiq,xrx200-pdi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ mac-address = [ 00 11 22 33 44 55 ];
+ lantiq,switch;
+
+ ethernet@0 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <0>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+ };
+ ethernet@1 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <1>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy1>;
+ };
+ ethernet@2 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <2>;
+ phy-mode = "gmii";
+ phy-handle = <&phy11>;
+ };
+ ethernet@4 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <4>;
+ phy-mode = "gmii";
+ phy-handle = <&phy13>;
+ };
+ ethernet@5 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <5>;
+ phy-mode = "rgmii";
+ phy-handle = <&phy5>;
+ };
+ };
+
+ mdio@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "lantiq,xrx200-mdio";
+ phy0: ethernet-phy@0 {
+ reg = <0x0>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+ phy1: ethernet-phy@1 {
+ reg = <0x1>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+ phy5: ethernet-phy@5 {
+ reg = <0x5>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+ phy11: ethernet-phy@11 {
+ reg = <0x11>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+ phy13: ethernet-phy@13 {
+ reg = <0x13>;
+ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+ };
+ };
+ };
+
+ stp: stp@E100BB0 {
+ compatible = "lantiq,gpio-stp-xway";
+ reg = <0xE100BB0 0x40>;
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ lantiq,shadow = <0xffffff>;
+ lantiq,groups = <0x7>;
+ /*
+ lantiq,dsl = <0x3>;
+ lantiq,phy1 = <0x7>;
+ lantiq,phy2 = <0x7>;
+ */
+ };
+
+ ifxhcd@E101000 {
+ status = "okay";
+ gpios = <&gpio 33 0>;
+ lantiq,portmask = <0x3>;
+ };
+
+ pci@E105400 {
+ lantiq,bus-clock = <33333333>;
+ /* lantiq,external-clock; */
+ lantiq,delay-hi = <0>; /* 0ns delay */
+ lantiq,delay-lo = <0>; /* 0.0ns delay */
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+ 0x7000 0 0 1 &icu0 29 //1 // slot 14, irq 29
+ >;
+ gpio-reset = <&gpio 21 0>;
+ req-mask = <0x1>; /* GNT1 */
+ status = "okay";
+ };
+ };
+
+ gphy-xrx200 {
+ compatible = "lantiq,phy-xrx200";
+ firmware = "lantiq/vr9_phy11g_a1x.bin";
+ phys = [ 00 01 ];
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <100>;
+ reset {
+ label = "reset";
+ gpios = <&gpio 39 1>;
+ linux,code = <0x198>;
+ };
+ rfkill {
+ label = "rfkill";
+ gpios = <&gpio 1 1>;
+ linux,code = <0xf7>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ internet2 {
+ label = "internet2";
+ gpios = <&stp 16 1>;
+ };
+ internet {
+ label = "internet";
+ gpios = <&stp 17 1>;
+ };
+ dsl {
+ label = "dsl";
+ gpios = <&stp 18 1>;
+ };
+ dsl2 {
+ label = "dsl2";
+ gpios = <&stp 19 1>;
+ };
+ wifi2 {
+ label = "wifi2";
+ gpios = <&stp 20 1>;
+ };
+ wlan {
+ label = "wifi";
+ gpios = <&stp 21 1>;
+ };
+ power2 {
+ label = "power2";
+ gpios = <&stp 22 1>;
+ };
+ power {
+ label = "power";
+ gpios = <&stp 23 1>;
+ };
+ usb1 {
+ label = "usb";
+ gpios = <&gpio 38 1>;
+ };
+ usb2 {
+ label = "usb2";
+ gpios = <&gpio 44 1>;
+ };
+ phone1 {
+ label = "phone1";
+ gpios = <&gpio 11 1>;
+ };
+ phone1warn {
+ label = "phone1warn";
+ gpios = <&gpio 12 1>;
+ };
+ phone2 {
+ label = "phone2";
+ gpios = <&gpio 28 1>;
+ };
+ phone2warn {
+ label = "phone2warn";
+ gpios = <&gpio 26 1>;
+ };
+ };
+};
diff --git a/target/linux/lantiq/image/Makefile b/target/linux/lantiq/image/Makefile
index 98f82369b1..4550fc4619 100644
--- a/target/linux/lantiq/image/Makefile
+++ b/target/linux/lantiq/image/Makefile
@@ -310,6 +310,10 @@ endif
ifeq ($(CONFIG_TARGET_lantiq_xrx200),y)
# VR9
+Image/BuildKernel/Profile/P2812HNUFX=$(call Image/BuildKernel/Template,P2812HNUFX)
+Image/InstallKernel/Template/P2812HNUFX=$(call Image/InstallKernel/Template,P2812HNUFX)
+Image/Build/Profile/P2812HNUFX=$(call Image/Build/$(1),$(1),P2812HNUFX)
+
Image/BuildKernel/Profile/EASY80920NAND=$(call Image/BuildKernel/Template,EASY80920NAND)
Image/Build/Profile/EASY80920NAND=$(call Image/Build/$(1),$(1),EASY80920NAND)
diff --git a/target/linux/lantiq/xrx200/profiles/zyxel.mk b/target/linux/lantiq/xrx200/profiles/zyxel.mk
new file mode 100644
index 0000000000..e758a50360
--- /dev/null
+++ b/target/linux/lantiq/xrx200/profiles/zyxel.mk
@@ -0,0 +1,14 @@
+define Profile/P2812HNUFX
+ NAME:=ZyXEL P-2812HNU-Fx
+ PACKAGES:=kmod-rt2800-pci wpad-mini \
+ kmod-ltq-deu-vr9 kmod-ltq-hcd-vr9 \
+ kmod-ltq-vdsl-vr9-mei kmod-ltq-vdsl-vr9 \
+ kmod-ltq-atm-vr9 ltq-vdsl-vr9-fw-installer \
+ ltq-vdsl-app ppp-mod-pppoa \
+ swconfig
+endef
+
+P2812HNUFX_UBIFS_OPTS:="-m 2048 -e 126KiB -c 4096"
+P2812HNUFX_UBI_OPTS:="-m 2048 -p 128KiB -s 512"
+
+$(eval $(call Profile,P2812HNUFX))