diff options
Diffstat (limited to 'target/linux')
17 files changed, 58 insertions, 58 deletions
diff --git a/target/linux/adm5120/patches-2.6.32/001-adm5120.patch b/target/linux/adm5120/patches-2.6.32/001-adm5120.patch index 5a5750bac7..c05afcba1c 100644 --- a/target/linux/adm5120/patches-2.6.32/001-adm5120.patch +++ b/target/linux/adm5120/patches-2.6.32/001-adm5120.patch @@ -32,7 +32,7 @@ source "arch/mips/bcm63xx/Kconfig" --- a/arch/mips/Makefile +++ b/arch/mips/Makefile -@@ -191,6 +191,22 @@ cflags-$(CONFIG_MACH_JAZZ) += -I$(srctre +@@ -193,6 +193,22 @@ cflags-$(CONFIG_MACH_JAZZ) += -I$(srctre load-$(CONFIG_MACH_JAZZ) += 0xffffffff80080000 # diff --git a/target/linux/adm5120/patches-2.6.32/101-cfi_fixup_macronix_bootloc.patch b/target/linux/adm5120/patches-2.6.32/101-cfi_fixup_macronix_bootloc.patch index ab6d221548..a44ebd5b9c 100644 --- a/target/linux/adm5120/patches-2.6.32/101-cfi_fixup_macronix_bootloc.patch +++ b/target/linux/adm5120/patches-2.6.32/101-cfi_fixup_macronix_bootloc.patch @@ -55,7 +55,7 @@ static struct cfi_fixup cfi_fixup_table[] = { { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL }, #ifdef AMD_BOOTLOC_BUG -@@ -319,6 +360,9 @@ static struct cfi_fixup fixup_table[] = +@@ -319,6 +360,9 @@ static struct cfi_fixup fixup_table[] = */ { CFI_MFR_ANY, CFI_ID_ANY, fixup_use_erase_chip, NULL }, { CFI_MFR_ATMEL, AT49BV6416, fixup_use_atmel_lock, NULL }, diff --git a/target/linux/adm5120/patches-2.6.32/200-amba_pl010_hacks.patch b/target/linux/adm5120/patches-2.6.32/200-amba_pl010_hacks.patch index 41c88a9488..5f32fa2ddf 100644 --- a/target/linux/adm5120/patches-2.6.32/200-amba_pl010_hacks.patch +++ b/target/linux/adm5120/patches-2.6.32/200-amba_pl010_hacks.patch @@ -267,7 +267,7 @@ } static void -@@ -565,8 +564,8 @@ pl010_console_write(struct console *co, +@@ -565,8 +564,8 @@ pl010_console_write(struct console *co, /* * First save the CR then disable the interrupts */ @@ -278,7 +278,7 @@ uart_console_write(&uap->port, s, count, pl010_console_putchar); -@@ -575,10 +574,10 @@ pl010_console_write(struct console *co, +@@ -575,10 +574,10 @@ pl010_console_write(struct console *co, * and restore the TCR */ do { diff --git a/target/linux/adm5120/patches-2.6.32/902-adm5120-usb-remove-dev-power-power_state.patch b/target/linux/adm5120/patches-2.6.32/902-adm5120-usb-remove-dev-power-power_state.patch index 0256bc6b22..4fd0283f41 100644 --- a/target/linux/adm5120/patches-2.6.32/902-adm5120-usb-remove-dev-power-power_state.patch +++ b/target/linux/adm5120/patches-2.6.32/902-adm5120-usb-remove-dev-power-power_state.patch @@ -1,6 +1,6 @@ --- a/drivers/usb/host/adm5120-dbg.c +++ b/drivers/usb/host/adm5120-dbg.c -@@ -632,7 +632,7 @@ static ssize_t fill_registers_buffer(str +@@ -642,7 +642,7 @@ static ssize_t fill_registers_buffer(str hcd->product_desc, hcd_name); diff --git a/target/linux/adm5120/patches-2.6.32/903-adm5120-usb-use-the-admhcd-structure-directly-in-debugfs-files.patch b/target/linux/adm5120/patches-2.6.32/903-adm5120-usb-use-the-admhcd-structure-directly-in-debugfs-files.patch index db6323d02f..aa50f8c48b 100644 --- a/target/linux/adm5120/patches-2.6.32/903-adm5120-usb-use-the-admhcd-structure-directly-in-debugfs-files.patch +++ b/target/linux/adm5120/patches-2.6.32/903-adm5120-usb-use-the-admhcd-structure-directly-in-debugfs-files.patch @@ -26,7 +26,7 @@ spin_lock_irqsave(&ahcd->lock, flags); temp = show_list(ahcd, buf->page, PAGE_SIZE, ahcd->ed_head); -@@ -516,8 +512,6 @@ static ssize_t fill_async_buffer(struct +@@ -516,8 +512,6 @@ static ssize_t fill_async_buffer(struct static ssize_t fill_periodic_buffer(struct debug_buffer *buf) { diff --git a/target/linux/adm5120/patches-2.6.34/001-adm5120.patch b/target/linux/adm5120/patches-2.6.34/001-adm5120.patch index 5a5750bac7..e165b04685 100644 --- a/target/linux/adm5120/patches-2.6.34/001-adm5120.patch +++ b/target/linux/adm5120/patches-2.6.34/001-adm5120.patch @@ -1,6 +1,6 @@ --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig -@@ -20,6 +20,21 @@ choice +@@ -23,6 +23,21 @@ choice prompt "System type" default SGI_IP22 @@ -21,18 +21,18 @@ + config MACH_ALCHEMY bool "Alchemy processor based machines" - -@@ -673,6 +688,7 @@ config CAVIUM_OCTEON_REFERENCE_BOARD + select SYS_SUPPORTS_ZBOOT +@@ -681,6 +696,7 @@ config CAVIUM_OCTEON_REFERENCE_BOARD endchoice +source "arch/mips/adm5120/Kconfig" source "arch/mips/alchemy/Kconfig" - source "arch/mips/basler/excite/Kconfig" source "arch/mips/bcm63xx/Kconfig" + source "arch/mips/jazz/Kconfig" --- a/arch/mips/Makefile +++ b/arch/mips/Makefile -@@ -191,6 +191,22 @@ cflags-$(CONFIG_MACH_JAZZ) += -I$(srctre +@@ -214,6 +214,22 @@ cflags-$(CONFIG_MACH_JAZZ) += -I$(srctre load-$(CONFIG_MACH_JAZZ) += 0xffffffff80080000 # diff --git a/target/linux/adm5120/patches-2.6.34/002-adm5120_flash.patch b/target/linux/adm5120/patches-2.6.34/002-adm5120_flash.patch index 59921de09e..6139c4e182 100644 --- a/target/linux/adm5120/patches-2.6.34/002-adm5120_flash.patch +++ b/target/linux/adm5120/patches-2.6.34/002-adm5120_flash.patch @@ -1,8 +1,8 @@ --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig -@@ -557,4 +557,8 @@ config MTD_VMU - To build this as a module select M here, the module will be called - vmu-flash. +@@ -551,4 +551,8 @@ config MTD_PISMO + + When built as a module, it will be called pismo.ko +config MTD_ADM5120 + tristate "Map driver for ADM5120 based boards" @@ -11,7 +11,7 @@ endmenu --- a/drivers/mtd/maps/Makefile +++ b/drivers/mtd/maps/Makefile -@@ -40,6 +40,7 @@ +@@ -40,6 +40,7 @@ obj-$(CONFIG_MTD_SCx200_DOCFLASH)+= scx2 obj-$(CONFIG_MTD_DBOX2) += dbox2-flash.o obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o obj-$(CONFIG_MTD_PCI) += pci.o diff --git a/target/linux/adm5120/patches-2.6.34/003-adm5120_switch.patch b/target/linux/adm5120/patches-2.6.34/003-adm5120_switch.patch index cf6350c8cb..fb5fb83127 100644 --- a/target/linux/adm5120/patches-2.6.34/003-adm5120_switch.patch +++ b/target/linux/adm5120/patches-2.6.34/003-adm5120_switch.patch @@ -1,6 +1,6 @@ --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig -@@ -602,6 +602,10 @@ config MIPS_AU1X00_ENET +@@ -614,6 +614,10 @@ config MIPS_AU1X00_ENET If you have an Alchemy Semi AU1X00 based system say Y. Otherwise, say N. @@ -13,7 +13,7 @@ depends on PCI && SGI_IP27 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile -@@ -208,6 +208,7 @@ obj-$(CONFIG_SC92031) += sc92031.o +@@ -213,6 +213,7 @@ obj-$(CONFIG_SC92031) += sc92031.o # This is also a 82596 and should probably be merged obj-$(CONFIG_LP486E) += lp486e.o diff --git a/target/linux/adm5120/patches-2.6.34/007-adm5120_pci.patch b/target/linux/adm5120/patches-2.6.34/007-adm5120_pci.patch index 91bd79d761..b06d7947ce 100644 --- a/target/linux/adm5120/patches-2.6.34/007-adm5120_pci.patch +++ b/target/linux/adm5120/patches-2.6.34/007-adm5120_pci.patch @@ -10,7 +10,7 @@ obj-$(CONFIG_CPU_CAVIUM_OCTEON) += msi-octeon.o --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h -@@ -1748,6 +1748,9 @@ +@@ -1752,6 +1752,9 @@ #define PCI_VENDOR_ID_ESDGMBH 0x12fe #define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111 diff --git a/target/linux/adm5120/patches-2.6.34/009-adm5120_leds_switch_trigger.patch b/target/linux/adm5120/patches-2.6.34/009-adm5120_leds_switch_trigger.patch index 272fb8f19c..0258fa4fbe 100644 --- a/target/linux/adm5120/patches-2.6.34/009-adm5120_leds_switch_trigger.patch +++ b/target/linux/adm5120/patches-2.6.34/009-adm5120_leds_switch_trigger.patch @@ -1,6 +1,6 @@ --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig -@@ -315,4 +315,12 @@ config LEDS_TRIGGER_NETDEV +@@ -365,4 +365,12 @@ config LEDS_TRIGGER_NETDEV This allows LEDs to be controlled by network device activity. If unsure, say Y. @@ -15,7 +15,7 @@ endif # NEW_LEDS --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile -@@ -42,3 +42,4 @@ obj-$(CONFIG_LEDS_TRIGGER_GPIO) += ledt +@@ -48,3 +48,4 @@ obj-$(CONFIG_LEDS_TRIGGER_GPIO) += ledt obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o obj-$(CONFIG_LEDS_TRIGGER_MORSE) += ledtrig-morse.o obj-$(CONFIG_LEDS_TRIGGER_NETDEV) += ledtrig-netdev.o diff --git a/target/linux/adm5120/patches-2.6.34/101-cfi_fixup_macronix_bootloc.patch b/target/linux/adm5120/patches-2.6.34/101-cfi_fixup_macronix_bootloc.patch index ab6d221548..43459328a4 100644 --- a/target/linux/adm5120/patches-2.6.34/101-cfi_fixup_macronix_bootloc.patch +++ b/target/linux/adm5120/patches-2.6.34/101-cfi_fixup_macronix_bootloc.patch @@ -55,7 +55,7 @@ static struct cfi_fixup cfi_fixup_table[] = { { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL }, #ifdef AMD_BOOTLOC_BUG -@@ -319,6 +360,9 @@ static struct cfi_fixup fixup_table[] = +@@ -319,6 +360,9 @@ static struct cfi_fixup fixup_table[] = */ { CFI_MFR_ANY, CFI_ID_ANY, fixup_use_erase_chip, NULL }, { CFI_MFR_ATMEL, AT49BV6416, fixup_use_atmel_lock, NULL }, @@ -67,7 +67,7 @@ --- a/drivers/mtd/chips/Kconfig +++ b/drivers/mtd/chips/Kconfig -@@ -198,6 +198,14 @@ config MTD_CFI_AMDSTD +@@ -196,6 +196,14 @@ config MTD_CFI_AMDSTD provides support for one of those command sets, used on chips including the AMD Am29LV320. diff --git a/target/linux/adm5120/patches-2.6.34/120-rb153_cf_driver.patch b/target/linux/adm5120/patches-2.6.34/120-rb153_cf_driver.patch index c8e2be4f4a..c6d16608c8 100644 --- a/target/linux/adm5120/patches-2.6.34/120-rb153_cf_driver.patch +++ b/target/linux/adm5120/patches-2.6.34/120-rb153_cf_driver.patch @@ -1,6 +1,6 @@ --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile -@@ -77,6 +77,7 @@ obj-$(CONFIG_PATA_PLATFORM) += pata_plat +@@ -79,6 +79,7 @@ obj-$(CONFIG_PATA_PLATFORM) += pata_plat obj-$(CONFIG_PATA_AT91) += pata_at91.o obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o obj-$(CONFIG_PATA_ICSIDE) += pata_icside.o @@ -10,7 +10,7 @@ # Should be last but one libata driver --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig -@@ -597,6 +597,15 @@ config PATA_RADISYS +@@ -604,6 +604,15 @@ config PATA_RADISYS If unsure, say N. diff --git a/target/linux/adm5120/patches-2.6.34/200-amba_pl010_hacks.patch b/target/linux/adm5120/patches-2.6.34/200-amba_pl010_hacks.patch index 41c88a9488..e458ab727a 100644 --- a/target/linux/adm5120/patches-2.6.34/200-amba_pl010_hacks.patch +++ b/target/linux/adm5120/patches-2.6.34/200-amba_pl010_hacks.patch @@ -1,6 +1,6 @@ --- a/drivers/serial/amba-pl010.c +++ b/drivers/serial/amba-pl010.c -@@ -50,11 +50,10 @@ +@@ -51,11 +51,10 @@ #include <asm/io.h> @@ -14,7 +14,7 @@ #define AMBA_ISR_PASS_LIMIT 256 -@@ -80,9 +79,9 @@ static void pl010_stop_tx(struct uart_po +@@ -81,9 +80,9 @@ static void pl010_stop_tx(struct uart_po struct uart_amba_port *uap = (struct uart_amba_port *)port; unsigned int cr; @@ -26,7 +26,7 @@ } static void pl010_start_tx(struct uart_port *port) -@@ -90,9 +89,9 @@ static void pl010_start_tx(struct uart_p +@@ -91,9 +90,9 @@ static void pl010_start_tx(struct uart_p struct uart_amba_port *uap = (struct uart_amba_port *)port; unsigned int cr; @@ -38,7 +38,7 @@ } static void pl010_stop_rx(struct uart_port *port) -@@ -100,9 +99,9 @@ static void pl010_stop_rx(struct uart_po +@@ -101,9 +100,9 @@ static void pl010_stop_rx(struct uart_po struct uart_amba_port *uap = (struct uart_amba_port *)port; unsigned int cr; @@ -50,7 +50,7 @@ } static void pl010_enable_ms(struct uart_port *port) -@@ -110,9 +109,9 @@ static void pl010_enable_ms(struct uart_ +@@ -111,9 +110,9 @@ static void pl010_enable_ms(struct uart_ struct uart_amba_port *uap = (struct uart_amba_port *)port; unsigned int cr; @@ -62,7 +62,7 @@ } static void pl010_rx_chars(struct uart_amba_port *uap) -@@ -120,9 +119,9 @@ static void pl010_rx_chars(struct uart_a +@@ -121,9 +120,9 @@ static void pl010_rx_chars(struct uart_a struct tty_struct *tty = uap->port.state->port.tty; unsigned int status, ch, flag, rsr, max_count = 256; @@ -74,7 +74,7 @@ flag = TTY_NORMAL; uap->port.icount.rx++; -@@ -131,9 +130,9 @@ static void pl010_rx_chars(struct uart_a +@@ -132,9 +131,9 @@ static void pl010_rx_chars(struct uart_a * Note that the error handling code is * out of the main execution path */ @@ -86,7 +86,7 @@ if (rsr & UART01x_RSR_BE) { rsr &= ~(UART01x_RSR_FE | UART01x_RSR_PE); -@@ -163,7 +162,7 @@ static void pl010_rx_chars(struct uart_a +@@ -164,7 +163,7 @@ static void pl010_rx_chars(struct uart_a uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag); ignore_char: @@ -95,7 +95,7 @@ } spin_unlock(&uap->port.lock); tty_flip_buffer_push(tty); -@@ -176,7 +175,7 @@ static void pl010_tx_chars(struct uart_a +@@ -177,7 +176,7 @@ static void pl010_tx_chars(struct uart_a int count; if (uap->port.x_char) { @@ -104,7 +104,7 @@ uap->port.icount.tx++; uap->port.x_char = 0; return; -@@ -188,7 +187,7 @@ static void pl010_tx_chars(struct uart_a +@@ -189,7 +188,7 @@ static void pl010_tx_chars(struct uart_a count = uap->port.fifosize >> 1; do { @@ -113,7 +113,7 @@ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); uap->port.icount.tx++; if (uart_circ_empty(xmit)) -@@ -206,9 +205,9 @@ static void pl010_modem_status(struct ua +@@ -207,9 +206,9 @@ static void pl010_modem_status(struct ua { unsigned int status, delta; @@ -125,7 +125,7 @@ delta = status ^ uap->old_status; uap->old_status = status; -@@ -236,7 +235,7 @@ static irqreturn_t pl010_int(int irq, vo +@@ -237,7 +236,7 @@ static irqreturn_t pl010_int(int irq, vo spin_lock(&uap->port.lock); @@ -134,7 +134,7 @@ if (status) { do { if (status & (UART010_IIR_RTIS | UART010_IIR_RIS)) -@@ -249,7 +248,7 @@ static irqreturn_t pl010_int(int irq, vo +@@ -250,7 +249,7 @@ static irqreturn_t pl010_int(int irq, vo if (pass_counter-- == 0) break; @@ -143,7 +143,7 @@ } while (status & (UART010_IIR_RTIS | UART010_IIR_RIS | UART010_IIR_TIS)); handled = 1; -@@ -263,7 +262,7 @@ static irqreturn_t pl010_int(int irq, vo +@@ -264,7 +263,7 @@ static irqreturn_t pl010_int(int irq, vo static unsigned int pl010_tx_empty(struct uart_port *port) { struct uart_amba_port *uap = (struct uart_amba_port *)port; @@ -152,7 +152,7 @@ return status & UART01x_FR_BUSY ? 0 : TIOCSER_TEMT; } -@@ -273,7 +272,7 @@ static unsigned int pl010_get_mctrl(stru +@@ -274,7 +273,7 @@ static unsigned int pl010_get_mctrl(stru unsigned int result = 0; unsigned int status; @@ -161,7 +161,7 @@ if (status & UART01x_FR_DCD) result |= TIOCM_CAR; if (status & UART01x_FR_DSR) -@@ -299,12 +298,12 @@ static void pl010_break_ctl(struct uart_ +@@ -300,12 +299,12 @@ static void pl010_break_ctl(struct uart_ unsigned int lcr_h; spin_lock_irqsave(&uap->port.lock, flags); @@ -176,7 +176,7 @@ spin_unlock_irqrestore(&uap->port.lock, flags); } -@@ -332,12 +331,12 @@ static int pl010_startup(struct uart_por +@@ -333,12 +332,12 @@ static int pl010_startup(struct uart_por /* * initialise the old status of the modem signals */ @@ -191,7 +191,7 @@ uap->port.membase + UART010_CR); return 0; -@@ -360,10 +359,10 @@ static void pl010_shutdown(struct uart_p +@@ -361,10 +360,10 @@ static void pl010_shutdown(struct uart_p /* * disable all interrupts, disable the port */ @@ -204,7 +204,7 @@ ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN), uap->port.membase + UART010_LCRH); -@@ -385,7 +384,7 @@ pl010_set_termios(struct uart_port *port +@@ -386,7 +385,7 @@ pl010_set_termios(struct uart_port *port /* * Ask the core to calculate the divisor for us. */ @@ -213,7 +213,7 @@ quot = uart_get_divisor(port, baud); switch (termios->c_cflag & CSIZE) { -@@ -448,25 +447,25 @@ pl010_set_termios(struct uart_port *port +@@ -449,25 +448,25 @@ pl010_set_termios(struct uart_port *port uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX; /* first, disable everything */ @@ -245,7 +245,7 @@ spin_unlock_irqrestore(&uap->port.lock, flags); } -@@ -538,7 +537,7 @@ static struct uart_ops amba_pl010_pops = +@@ -554,7 +553,7 @@ static struct uart_ops amba_pl010_pops = .verify_port = pl010_verify_port, }; @@ -254,7 +254,7 @@ #ifdef CONFIG_SERIAL_AMBA_PL010_CONSOLE -@@ -548,10 +547,10 @@ static void pl010_console_putchar(struct +@@ -564,10 +563,10 @@ static void pl010_console_putchar(struct unsigned int status; do { @@ -267,7 +267,7 @@ } static void -@@ -565,8 +564,8 @@ pl010_console_write(struct console *co, +@@ -581,8 +580,8 @@ pl010_console_write(struct console *co, /* * First save the CR then disable the interrupts */ @@ -278,7 +278,7 @@ uart_console_write(&uap->port, s, count, pl010_console_putchar); -@@ -575,10 +574,10 @@ pl010_console_write(struct console *co, +@@ -591,10 +590,10 @@ pl010_console_write(struct console *co, * and restore the TCR */ do { @@ -291,7 +291,7 @@ clk_disable(uap->clk); } -@@ -587,9 +586,9 @@ static void __init +@@ -603,9 +602,9 @@ static void __init pl010_console_get_options(struct uart_amba_port *uap, int *baud, int *parity, int *bits) { @@ -303,7 +303,7 @@ *parity = 'n'; if (lcr_h & UART01x_LCRH_PEN) { -@@ -604,8 +603,8 @@ pl010_console_get_options(struct uart_am +@@ -620,8 +619,8 @@ pl010_console_get_options(struct uart_am else *bits = 8; @@ -314,7 +314,7 @@ *baud = uap->port.uartclk / (16 * (quot + 1)); } } -@@ -623,7 +622,7 @@ static int __init pl010_console_setup(st +@@ -639,7 +638,7 @@ static int __init pl010_console_setup(st * if so, search for the first available port that does have * console support. */ @@ -323,7 +323,7 @@ co->index = 0; uap = amba_ports[co->index]; if (!uap) -@@ -641,7 +640,7 @@ static int __init pl010_console_setup(st +@@ -657,7 +656,7 @@ static int __init pl010_console_setup(st static struct uart_driver amba_reg; static struct console amba_console = { @@ -332,7 +332,7 @@ .write = pl010_console_write, .device = uart_console_device, .setup = pl010_console_setup, -@@ -657,11 +656,11 @@ static struct console amba_console = { +@@ -673,11 +672,11 @@ static struct console amba_console = { static struct uart_driver amba_reg = { .owner = THIS_MODULE, diff --git a/target/linux/adm5120/patches-2.6.34/203-gpio_leds_brightness.patch b/target/linux/adm5120/patches-2.6.34/203-gpio_leds_brightness.patch index 8bccf395c1..54c6468699 100644 --- a/target/linux/adm5120/patches-2.6.34/203-gpio_leds_brightness.patch +++ b/target/linux/adm5120/patches-2.6.34/203-gpio_leds_brightness.patch @@ -1,6 +1,6 @@ --- a/drivers/leds/leds-gpio.c +++ b/drivers/leds/leds-gpio.c -@@ -44,13 +44,17 @@ static void gpio_led_set(struct led_clas +@@ -45,13 +45,17 @@ static void gpio_led_set(struct led_clas container_of(led_cdev, struct gpio_led_data, cdev); int level; diff --git a/target/linux/adm5120/patches-2.6.34/310-adm5120_wdt.patch b/target/linux/adm5120/patches-2.6.34/310-adm5120_wdt.patch index b7833c72a7..0c4e8e623c 100644 --- a/target/linux/adm5120/patches-2.6.34/310-adm5120_wdt.patch +++ b/target/linux/adm5120/patches-2.6.34/310-adm5120_wdt.patch @@ -1,6 +1,6 @@ --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig -@@ -790,6 +790,18 @@ config RC32434_WDT +@@ -807,6 +807,18 @@ config RC32434_WDT To compile this driver as a module, choose M here: the module will be called rc32434_wdt. @@ -21,7 +21,7 @@ depends on SGI_HAS_INDYDOG --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile -@@ -113,6 +113,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o +@@ -113,6 +113,7 @@ obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o obj-$(CONFIG_AR7_WDT) += ar7_wdt.o obj-$(CONFIG_TXX9_WDT) += txx9wdt.o diff --git a/target/linux/adm5120/patches-2.6.34/902-adm5120-usb-remove-dev-power-power_state.patch b/target/linux/adm5120/patches-2.6.34/902-adm5120-usb-remove-dev-power-power_state.patch index 0256bc6b22..4fd0283f41 100644 --- a/target/linux/adm5120/patches-2.6.34/902-adm5120-usb-remove-dev-power-power_state.patch +++ b/target/linux/adm5120/patches-2.6.34/902-adm5120-usb-remove-dev-power-power_state.patch @@ -1,6 +1,6 @@ --- a/drivers/usb/host/adm5120-dbg.c +++ b/drivers/usb/host/adm5120-dbg.c -@@ -632,7 +632,7 @@ static ssize_t fill_registers_buffer(str +@@ -642,7 +642,7 @@ static ssize_t fill_registers_buffer(str hcd->product_desc, hcd_name); diff --git a/target/linux/adm5120/patches-2.6.34/903-adm5120-usb-use-the-admhcd-structure-directly-in-debugfs-files.patch b/target/linux/adm5120/patches-2.6.34/903-adm5120-usb-use-the-admhcd-structure-directly-in-debugfs-files.patch index db6323d02f..aa50f8c48b 100644 --- a/target/linux/adm5120/patches-2.6.34/903-adm5120-usb-use-the-admhcd-structure-directly-in-debugfs-files.patch +++ b/target/linux/adm5120/patches-2.6.34/903-adm5120-usb-use-the-admhcd-structure-directly-in-debugfs-files.patch @@ -26,7 +26,7 @@ spin_lock_irqsave(&ahcd->lock, flags); temp = show_list(ahcd, buf->page, PAGE_SIZE, ahcd->ed_head); -@@ -516,8 +512,6 @@ static ssize_t fill_async_buffer(struct +@@ -516,8 +512,6 @@ static ssize_t fill_async_buffer(struct static ssize_t fill_periodic_buffer(struct debug_buffer *buf) { |