aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux')
-rwxr-xr-xtarget/linux/lantiq/base-files/etc/board.d/01_leds7
-rwxr-xr-xtarget/linux/lantiq/base-files/etc/board.d/02_network7
-rw-r--r--target/linux/lantiq/dts/WBMR300.dts303
-rw-r--r--target/linux/lantiq/image/Makefile8
4 files changed, 325 insertions, 0 deletions
diff --git a/target/linux/lantiq/base-files/etc/board.d/01_leds b/target/linux/lantiq/base-files/etc/board.d/01_leds
index 39b693ac19..c365468030 100755
--- a/target/linux/lantiq/base-files/etc/board.d/01_leds
+++ b/target/linux/lantiq/base-files/etc/board.d/01_leds
@@ -42,6 +42,13 @@ P2812HNUF*)
ARV7519RW22)
ucidef_set_led_netdev "lan" "lan" "arv7519rw22:green:lan" "eth0.1"
;;
+WBMR300)
+ ucidef_set_led_switch "lan1" "LAN1" "wbmr300:green:lan1" "switch0" "0x08"
+ ucidef_set_led_switch "lan2" "LAN2" "wbmr300:green:lan2" "switch0" "0x04"
+ ucidef_set_led_switch "wan" "WAN" "wbmr300:green:wan" "switch0" "0x10"
+ ucidef_set_led_switch "lan3" "LAN3" "wbmr300:green:lan3" "switch0" "0x20"
+ ucidef_set_led_default "router" "router" "wbmr300:green:router" "1"
+ ;;
*)
;;
esac
diff --git a/target/linux/lantiq/base-files/etc/board.d/02_network b/target/linux/lantiq/base-files/etc/board.d/02_network
index a3dc80c54b..89ffc79b0f 100755
--- a/target/linux/lantiq/base-files/etc/board.d/02_network
+++ b/target/linux/lantiq/base-files/etc/board.d/02_network
@@ -146,6 +146,13 @@ VGV7510KW22)
"2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "6t@eth0"
;;
+WBMR300)
+ lan_mac=$(mtd_get_mac_ascii ubootconfig ethaddr)
+ wan_mac="$lan_mac"
+ ucidef_add_switch "switch0" \
+ "2:lan:1" "3:lan:2" "5:lan:3" "4:wan:1" "6t@eth0"
+ ;;
+
esac
if [ -n "$(ls /lib/modules/`uname -r`/ltq_atm*)" ]; then
diff --git a/target/linux/lantiq/dts/WBMR300.dts b/target/linux/lantiq/dts/WBMR300.dts
new file mode 100644
index 0000000000..824efb7cc0
--- /dev/null
+++ b/target/linux/lantiq/dts/WBMR300.dts
@@ -0,0 +1,303 @@
+/dts-v1/;
+
+/include/ "vr9.dtsi"
+
+/ {
+ model = "WBMR300 - Buffalo WBMR-300HPD";
+
+ chosen {
+ bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
+
+ leds {
+ boot = &power_g;
+ failsafe = &diag_r;
+ running = &power_g;
+
+ dsl = &dsl;
+ internet = &router_g;
+ wifi = &wifi_g;
+ };
+ };
+
+ memory@0 {
+ reg = <0x0 0x4000000>;
+ };
+
+ fpi@10000000 {
+ gpio: pinmux@E100B10 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ mdio {
+ lantiq,groups = "mdio";
+ lantiq,function = "mdio";
+ };
+ phy-rst {
+ lantiq,pins = "io42";
+ lantiq,pull = <0>;
+ lantiq,open-drain = <0>;
+ lantiq,output = <1>;
+ };
+ pcie-rst {
+ lantiq,pins = "io38";
+ lantiq,pull = <0>;
+ lantiq,output = <1>;
+ };
+ };
+ pins_spi_default: pins_spi_default {
+ spi_in {
+ lantiq,groups = "spi_di";
+ lantiq,function = "spi";
+ };
+ spi_out {
+ lantiq,groups = "spi_do", "spi_clk",
+ "spi_cs4";
+ lantiq,function = "spi";
+ lantiq,output = <1>;
+ };
+ };
+ };
+
+ ifxhcd@E101000 {
+ status = "okay";
+ gpios = <&gpio 33 0>;
+ lantiq,portmask = <0x3>;
+ };
+
+ ifxhcd@E106000 {
+ status = "okay";
+ gpios = <&gpio 33 0>;
+ };
+ };
+
+ gphy-xrx200 {
+ compatible = "lantiq,phy-xrx200";
+ firmware = "lantiq/vr9_phy22f_a2x.bin";
+ phys = [ 00 01 ];
+ };
+
+ gpio_poweroff {
+ compatible = "gpio-poweroff";
+ gpios = <&gpio 6 1>;
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <100>;
+
+ power {
+ label = "power";
+ gpios = <&gpio 5 1>;
+ linux,code = <0x74>;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 7 1>;
+ linux,code = <0x198>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio 31 1>;
+ linux,code = <0x211>;
+ };
+
+ auto {
+ label = "auto";
+ gpios = <&gpio 48 0>;
+ linux,code = <0x100>;
+ linux,input-type = <5>; /* EV_SW */
+ };
+
+ router {
+ label = "router";
+ gpios = <&gpio 2 0>;
+ linux,code = <0x100>;
+ linux,input-type = <5>; /* EV_SW */
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ diag_r: diag_r {
+ label = "wbmr300:red:diag";
+ gpios = <&gpio 0 0>;
+ default_state = "off";
+ };
+
+ wifi_g: wifi_g {
+ label = "wbmr300:green:wifi";
+ gpios = <&gpio 1 0>;
+ };
+
+ dsl: dsl {
+ label = "dsl";
+ gpios = <&gpio 4 0>;
+ };
+
+ router_y: router_y {
+ label = "wbmr300:yellow:router";
+ gpios = <&gpio 8 0>;
+ };
+
+ wifi_y: wifi_y {
+ label = "wbmr300:yellow:wifi";
+ gpios = <&gpio 9 0>;
+ };
+
+ lan1: lan1 {
+ label = "wbmr300:green:lan1";
+ gpios = <&gpio 11 0>;
+ };
+
+ wan: wan {
+ label = "wbmr300:green:wan";
+ gpios = <&gpio 12 0>;
+ };
+
+ lan3: lan3 {
+ label = "wbmr300:green:lan3";
+ gpios = <&gpio 15 0>;
+ };
+
+ lan2: lan2 {
+ label = "wbmr300:green:lan2";
+ gpios = <&gpio 33 0>;
+ };
+
+ internet_g: internet_g {
+ label = "wbmr300:green:internet";
+ gpios = <&gpio 34 0>;
+ };
+
+ internet_y: internet_y {
+ label = "wbmr300:yellow:internet";
+ gpios = <&gpio 35 0>;
+ };
+
+ router_g: router_g {
+ label = "wbmr300:green:router";
+ gpios = <&gpio 36 0>;
+ };
+
+ power_g: power_g {
+ label = "wbmr300:green:power";
+ gpios = <&gpio 49 0>;
+ };
+ };
+};
+
+&spi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_spi_default>;
+
+ status = "ok";
+ m25p80@4 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <4 0>;
+ spi-max-frequency = <20000000>;
+
+ partition@0 {
+ reg = <0x0 0x10000>;
+ label = "u-boot";
+ read-only;
+ };
+
+ partition@10000 {
+ reg = <0x10000 0x10000>;
+ label = "gphyfirmware";
+ read-only;
+ };
+
+ partition@20000 {
+ reg = <0x20000 0x80000>;
+ label = "dsl_fw";
+ };
+
+ partition@de0000 {
+ reg = <0xa0000 0xf40000>;
+ label = "firmware";
+ };
+
+ partition@fe0000 {
+ reg = <0xfe0000 0x10000>;
+ label = "sysconfig";
+ read-only;
+ };
+
+ partition@ff0000 {
+ reg = <0xff0000 0x2000>;
+ label = "ubootconfig";
+ };
+
+ partition@ff3000 {
+ reg = <0xff3000 0x2000>;
+ label = "board_config";
+ read-only;
+ };
+ };
+};
+
+&eth0 {
+ lan: interface@0 {
+ compatible = "lantiq,xrx200-pdi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ lantiq,switch;
+
+ ethernet@1 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <4>;
+ phy-mode = "mii";
+ phy-handle = <&phy13>;
+ };
+ ethernet@2 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <5>;
+ phy-mode = "mii";
+ phy-handle = <&phy14>;
+ };
+ ethernet@3 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <2>;
+ phy-mode = "mii";
+ phy-handle = <&phy11>;
+ };
+ ethernet@4 {
+ compatible = "lantiq,xrx200-pdi-port";
+ reg = <3>;
+ phy-mode = "mii";
+ phy-handle = <&phy12>;
+ };
+ };
+
+ mdio@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "lantiq,xrx200-mdio";
+ phy11: ethernet-phy@11 {
+ reg = <0x11>;
+ compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+ };
+ phy12: ethernet-phy@12 {
+ reg = <0x12>;
+ compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+ };
+ phy13: ethernet-phy@13 {
+ reg = <0x13>;
+ compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+ };
+ phy14: ethernet-phy@14 {
+ reg = <0x14>;
+ compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+ };
+ };
+};
diff --git a/target/linux/lantiq/image/Makefile b/target/linux/lantiq/image/Makefile
index b1a6a80cb9..16c0820f11 100644
--- a/target/linux/lantiq/image/Makefile
+++ b/target/linux/lantiq/image/Makefile
@@ -647,6 +647,14 @@ Image/Build/Profile/VG3503J=$(call Image/BuildLoader/$(1),$(1),VG3503J)
include tp-link.mk
+define Device/WBMR300
+ DEVICE_PROFILE := WBMR300
+ IMAGE_SIZE := 15616k
+ DEVICE_TITLE := Buffalo WBMR-300HPD
+ DEVICE_PACKAGES := kmod-mt76 wpad-mini kmod-usb-dwc2
+endef
+TARGET_DEVICES += WBMR300
+
define Device/VGV7510KW22NOR
DEVICE_PROFILE := VGV7510KW22NOR
IMAGE_SIZE := 15232k
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 16:10:25 +0000