aboutsummaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
Diffstat (limited to 'target')
-rw-r--r--target/linux/bcm53xx/patches-3.14/170-pcie2-bcma-add-new-PCIe2-driver-for-bcma.patch81
-rw-r--r--target/linux/bcm53xx/patches-3.18/170-pcie2-bcma-add-new-PCIe2-driver-for-bcma.patch81
2 files changed, 112 insertions, 50 deletions
diff --git a/target/linux/bcm53xx/patches-3.14/170-pcie2-bcma-add-new-PCIe2-driver-for-bcma.patch b/target/linux/bcm53xx/patches-3.14/170-pcie2-bcma-add-new-PCIe2-driver-for-bcma.patch
index dcdbb8f967..e9631335de 100644
--- a/target/linux/bcm53xx/patches-3.14/170-pcie2-bcma-add-new-PCIe2-driver-for-bcma.patch
+++ b/target/linux/bcm53xx/patches-3.14/170-pcie2-bcma-add-new-PCIe2-driver-for-bcma.patch
@@ -72,7 +72,7 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+obj-$(CONFIG_PCI_BCM5301X) += pci-host-bcm5301x.o
--- /dev/null
+++ b/drivers/pci/host/pci-host-bcm5301x.c
-@@ -0,0 +1,428 @@
+@@ -0,0 +1,459 @@
+/*
+ * Northstar PCI-Express driver
+ * Only supports Root-Complex (RC) mode
@@ -94,13 +94,16 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+#include <linux/pci.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
-+#include <linux/interrupt.h>
+#include <linux/bcma/bcma.h>
+#include <linux/bcma/bcma_driver_pcie2.h>
-+#include <linux/of_irq.h>
+
+#define SOC_PCIE_HDR_OFF 0x400 /* 256 bytes per function */
+
++#define PCI_LINK_STATUS_CTRL_2_OFFSET 0xDC
++#define PCI_TARGET_LINK_SPEED_MASK 0xF
++#define PCI_TARGET_LINK_SPEED_GEN2 0x2
++#define PCI_TARGET_LINK_SPEED_GEN1 0x1
++
+static int bcma_pcie2_map_irq(const struct pci_dev *pdev, u8 slot, u8 pin)
+{
+ struct pci_sys_data *sys = pdev->sysdata;
@@ -222,31 +225,59 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+ * Check link status, return 0 if link is up in RC mode,
+ * otherwise return non-zero
+ */
-+static int bcma_pcie2_check_link(struct bcma_device *bdev, bool allow_gen2)
++static int bcma_pcie2_check_link(struct bcma_device *bdev, struct pci_sys_data *sys)
+{
-+ u32 devfn = 0;
+ u32 tmp32;
-+ u8 tmp8;
-+
-+ tmp32 = bcma_pcie2_read_config(bdev, 0, devfn, 0xdc, 4);
-+ tmp32 &= ~0xf;
-+ if (allow_gen2)
-+ tmp32 |= 2;
-+ else {
-+ /* force PCIE GEN1 */
-+ tmp32 |= 1;
-+ }
-+ bcma_pcie2_write_config(bdev, 0, devfn, 0xdc, 4, tmp32);
-+
-+ /* See if the port is in EP mode, indicated by header type 00 */
-+ tmp8 = bcma_pcie2_read_config(bdev, 0, devfn, PCI_HEADER_TYPE, 1);
-+ if (tmp8 != PCI_HEADER_TYPE_BRIDGE) {
-+ dev_info(&bdev->dev, "Port %d in End-Point mode - ignored\n",
-+ bdev->core_unit);
-+ return -ENODEV;
++ u16 tmp16;
++ u16 pos;
++ u8 nlw;
++ /*
++ * Setup callback (bcma_pcie2_setup) is called in pcibios_init_hw before
++ * creating bus root, so we don't have it here yet. On the other hand
++ * we really want to use pci_bus_find_capability helper to check NLW.
++ * Let's fake simple pci_bus just to query for capabilities.
++ */
++ struct pci_bus bus = {
++ .number = 0,
++ .ops = &bcma_pcie2_ops,
++ .sysdata = sys,
++ };
++
++ tmp32 = bcma_read32(bdev, BCMA_CORE_PCIE2_LINK_STATUS);
++ dev_dbg(&bdev->dev, "link status: 0x%08x\n", tmp32);
++
++ tmp32 = bcma_read32(bdev, BCMA_CORE_PCIE2_STRAP_STATUS);
++ dev_dbg(&bdev->dev, "strap status: 0x%08x\n", tmp32);
++
++ /* check link status to see if link is active */
++ pos = pci_bus_find_capability(&bus, 0, PCI_CAP_ID_EXP);
++ pci_bus_read_config_word(&bus, 0, pos + PCI_EXP_LNKSTA, &tmp16);
++ nlw = (tmp16 & PCI_EXP_LNKSTA_NLW) >> PCI_EXP_LNKSTA_NLW_SHIFT;
++
++ if (nlw == 0) {
++ /* try GEN 1 link speed */
++ tmp32 = bcma_pcie2_read_config(bdev, 0, 0,
++ PCI_LINK_STATUS_CTRL_2_OFFSET, 4);
++ if ((tmp32 & PCI_TARGET_LINK_SPEED_MASK) ==
++ PCI_TARGET_LINK_SPEED_GEN2) {
++ tmp32 &= ~PCI_TARGET_LINK_SPEED_MASK;
++ tmp32 |= PCI_TARGET_LINK_SPEED_GEN1;
++ bcma_pcie2_write_config(bdev, 0, 0,
++ PCI_LINK_STATUS_CTRL_2_OFFSET, 4, tmp32);
++ tmp32 = bcma_pcie2_read_config(bdev, 0, 0,
++ PCI_LINK_STATUS_CTRL_2_OFFSET, 4);
++ msleep(100);
++
++ pos = pci_bus_find_capability(&bus, 0, PCI_CAP_ID_EXP);
++ pci_bus_read_config_word(&bus, 0, pos + PCI_EXP_LNKSTA,
++ &tmp16);
++ nlw = (tmp16 & PCI_EXP_LNKSTA_NLW) >>
++ PCI_EXP_LNKSTA_NLW_SHIFT;
++ }
+ }
+
-+ return 0;
++ dev_info(&bdev->dev, "link: %s\n", nlw ? "UP" : "DOWN");
++ return nlw ? 0 : -ENODEV;
+}
+
+/*
@@ -438,7 +469,7 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+ * Skip inactive ports -
+ * will need to change this for hot-plugging
+ */
-+ ret = bcma_pcie2_check_link(bdev, true);
++ ret = bcma_pcie2_check_link(bdev, sys);
+ if (ret)
+ return ret;
+
diff --git a/target/linux/bcm53xx/patches-3.18/170-pcie2-bcma-add-new-PCIe2-driver-for-bcma.patch b/target/linux/bcm53xx/patches-3.18/170-pcie2-bcma-add-new-PCIe2-driver-for-bcma.patch
index fc616d7cd3..1a8460490f 100644
--- a/target/linux/bcm53xx/patches-3.18/170-pcie2-bcma-add-new-PCIe2-driver-for-bcma.patch
+++ b/target/linux/bcm53xx/patches-3.18/170-pcie2-bcma-add-new-PCIe2-driver-for-bcma.patch
@@ -72,7 +72,7 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+obj-$(CONFIG_PCI_BCM5301X) += pci-host-bcm5301x.o
--- /dev/null
+++ b/drivers/pci/host/pci-host-bcm5301x.c
-@@ -0,0 +1,428 @@
+@@ -0,0 +1,459 @@
+/*
+ * Northstar PCI-Express driver
+ * Only supports Root-Complex (RC) mode
@@ -94,13 +94,16 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+#include <linux/pci.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
-+#include <linux/interrupt.h>
+#include <linux/bcma/bcma.h>
+#include <linux/bcma/bcma_driver_pcie2.h>
-+#include <linux/of_irq.h>
+
+#define SOC_PCIE_HDR_OFF 0x400 /* 256 bytes per function */
+
++#define PCI_LINK_STATUS_CTRL_2_OFFSET 0xDC
++#define PCI_TARGET_LINK_SPEED_MASK 0xF
++#define PCI_TARGET_LINK_SPEED_GEN2 0x2
++#define PCI_TARGET_LINK_SPEED_GEN1 0x1
++
+static int bcma_pcie2_map_irq(const struct pci_dev *pdev, u8 slot, u8 pin)
+{
+ struct pci_sys_data *sys = pdev->sysdata;
@@ -222,31 +225,59 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+ * Check link status, return 0 if link is up in RC mode,
+ * otherwise return non-zero
+ */
-+static int bcma_pcie2_check_link(struct bcma_device *bdev, bool allow_gen2)
++static int bcma_pcie2_check_link(struct bcma_device *bdev, struct pci_sys_data *sys)
+{
-+ u32 devfn = 0;
+ u32 tmp32;
-+ u8 tmp8;
-+
-+ tmp32 = bcma_pcie2_read_config(bdev, 0, devfn, 0xdc, 4);
-+ tmp32 &= ~0xf;
-+ if (allow_gen2)
-+ tmp32 |= 2;
-+ else {
-+ /* force PCIE GEN1 */
-+ tmp32 |= 1;
-+ }
-+ bcma_pcie2_write_config(bdev, 0, devfn, 0xdc, 4, tmp32);
-+
-+ /* See if the port is in EP mode, indicated by header type 00 */
-+ tmp8 = bcma_pcie2_read_config(bdev, 0, devfn, PCI_HEADER_TYPE, 1);
-+ if (tmp8 != PCI_HEADER_TYPE_BRIDGE) {
-+ dev_info(&bdev->dev, "Port %d in End-Point mode - ignored\n",
-+ bdev->core_unit);
-+ return -ENODEV;
++ u16 tmp16;
++ u16 pos;
++ u8 nlw;
++ /*
++ * Setup callback (bcma_pcie2_setup) is called in pcibios_init_hw before
++ * creating bus root, so we don't have it here yet. On the other hand
++ * we really want to use pci_bus_find_capability helper to check NLW.
++ * Let's fake simple pci_bus just to query for capabilities.
++ */
++ struct pci_bus bus = {
++ .number = 0,
++ .ops = &bcma_pcie2_ops,
++ .sysdata = sys,
++ };
++
++ tmp32 = bcma_read32(bdev, BCMA_CORE_PCIE2_LINK_STATUS);
++ dev_dbg(&bdev->dev, "link status: 0x%08x\n", tmp32);
++
++ tmp32 = bcma_read32(bdev, BCMA_CORE_PCIE2_STRAP_STATUS);
++ dev_dbg(&bdev->dev, "strap status: 0x%08x\n", tmp32);
++
++ /* check link status to see if link is active */
++ pos = pci_bus_find_capability(&bus, 0, PCI_CAP_ID_EXP);
++ pci_bus_read_config_word(&bus, 0, pos + PCI_EXP_LNKSTA, &tmp16);
++ nlw = (tmp16 & PCI_EXP_LNKSTA_NLW) >> PCI_EXP_LNKSTA_NLW_SHIFT;
++
++ if (nlw == 0) {
++ /* try GEN 1 link speed */
++ tmp32 = bcma_pcie2_read_config(bdev, 0, 0,
++ PCI_LINK_STATUS_CTRL_2_OFFSET, 4);
++ if ((tmp32 & PCI_TARGET_LINK_SPEED_MASK) ==
++ PCI_TARGET_LINK_SPEED_GEN2) {
++ tmp32 &= ~PCI_TARGET_LINK_SPEED_MASK;
++ tmp32 |= PCI_TARGET_LINK_SPEED_GEN1;
++ bcma_pcie2_write_config(bdev, 0, 0,
++ PCI_LINK_STATUS_CTRL_2_OFFSET, 4, tmp32);
++ tmp32 = bcma_pcie2_read_config(bdev, 0, 0,
++ PCI_LINK_STATUS_CTRL_2_OFFSET, 4);
++ msleep(100);
++
++ pos = pci_bus_find_capability(&bus, 0, PCI_CAP_ID_EXP);
++ pci_bus_read_config_word(&bus, 0, pos + PCI_EXP_LNKSTA,
++ &tmp16);
++ nlw = (tmp16 & PCI_EXP_LNKSTA_NLW) >>
++ PCI_EXP_LNKSTA_NLW_SHIFT;
++ }
+ }
+
-+ return 0;
++ dev_info(&bdev->dev, "link: %s\n", nlw ? "UP" : "DOWN");
++ return nlw ? 0 : -ENODEV;
+}
+
+/*
@@ -438,7 +469,7 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+ * Skip inactive ports -
+ * will need to change this for hot-plugging
+ */
-+ ret = bcma_pcie2_check_link(bdev, true);
++ ret = bcma_pcie2_check_link(bdev, sys);
+ if (ret)
+ return ret;
+
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 02:44:46 +0000