From ecb32a2174fc391810491eccc0e3063e40c2ebb4 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Mon, 10 Jun 2013 08:24:56 +0000
Subject: ramips: add HAME MPR-A2 support

This patch adds support for HAME MPR-A2 router using a DTS file.
The platform is Ralink RT5350.
http://wiki.openwrt.org/toh/hame/mpr-a2

Signed-off-by: Dmitry Shmygov <shmygov@rambler.ru>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36898 3c298f89-4303-0410-b956-a3cf2f4a3e73
---
 target/linux/ramips/base-files/etc/diag.sh                   |  3 +++
 .../base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom       |  1 +
 target/linux/ramips/base-files/etc/uci-defaults/01_leds      |  3 +++
 target/linux/ramips/base-files/etc/uci-defaults/02_network   |  1 +
 target/linux/ramips/base-files/lib/preinit/06_set_iface_mac  |  1 +
 .../base-files/lib/preinit/07_set_preinit_iface_ramips       | 12 ++++++++++++
 target/linux/ramips/base-files/lib/ramips.sh                 |  3 +++
 target/linux/ramips/base-files/lib/upgrade/platform.sh       |  1 +
 8 files changed, 25 insertions(+)

(limited to 'target/linux/ramips/base-files')

diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index be2fa56faf..894be0f5e6 100755
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -55,6 +55,9 @@ get_status_led() {
 	mofi3500-3gn)
 		status_led="mofi3500-3gn:green:status"
 		;;
+	mpr-a2)
+		status_led="mpr-a2:red:power"
+		;;
 	nbg-419n)
 		status_led="nbg-419n:green:power"
 		;;
diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
index 41dabd9f01..810dddfe86 100644
--- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
+++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
@@ -77,6 +77,7 @@ case "$FIRMWARE" in
 	freestation5 | \
 	hw550-3g | \
 	mofi3500-3gn | \
+	mpr-a2 | \
 	pwh2004 | \
 	nbg-419n | \
 	nw718 | \
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/01_leds b/target/linux/ramips/base-files/etc/uci-defaults/01_leds
index ec031883ea..608816f195 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/01_leds
+++ b/target/linux/ramips/base-files/etc/uci-defaults/01_leds
@@ -94,6 +94,9 @@ case $board in
 	mofi3500-3gn)
 		set_usb_led "mofi3500-3gn:green:usb"
 		;;
+	mpr-a2)
+		set_wifi_led "mpr-a2:blue:system"
+		;;
 	mzk-w300nh2)
 		set_wifi_led "mzkw300nh2:amber:wlan"
 		;;
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/02_network b/target/linux/ramips/base-files/etc/uci-defaults/02_network
index fe81899e7b..b45b0ca25a 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/02_network
+++ b/target/linux/ramips/base-files/etc/uci-defaults/02_network
@@ -172,6 +172,7 @@ ramips_setup_macs()
 	broadway | \
 	dir-620-d1 | \
 	f5d8235-v1 | \
+	mpr-a2 | \
 	mzk-w300nh2 | \
 	nw718 | \
 	psr-680w | \
diff --git a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
index 022f72e240..bd1dac0dee 100644
--- a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
+++ b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
@@ -26,6 +26,7 @@ preinit_set_mac_address() {
 	dir-620-a1 |\
 	esr-9753 |\
 	freestation5 |\
+	mpr-a2 | \
 	nw718 |\
 	psr-680w |\
 	rt-n56u |\
diff --git a/target/linux/ramips/base-files/lib/preinit/07_set_preinit_iface_ramips b/target/linux/ramips/base-files/lib/preinit/07_set_preinit_iface_ramips
index c8b7f2ad38..edc5a12e34 100644
--- a/target/linux/ramips/base-files/lib/preinit/07_set_preinit_iface_ramips
+++ b/target/linux/ramips/base-files/lib/preinit/07_set_preinit_iface_ramips
@@ -6,6 +6,18 @@
 . /lib/ramips.sh
 
 ramips_set_preinit_iface() {
+	local board=$(ramips_board_name)
+
+	case "$board" in
+	mpr-a2)
+		#TODO
+		# Ralink ethernet driver cannot re-open ethernet if it is opened during preinit and then closed.
+		# Looks like Ralink ethernet driver has a problem.
+		# Temporary solution is not to open ethernet during preinit.
+		return 0
+		;;
+	esac
+
 	ifname=eth0
 }
 
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 03ae25bcb1..c5f216f780 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -115,6 +115,9 @@ ramips_board_detect() {
 	*"MoFi Network MOFI3500-3GN")
 		name="mofi3500-3gn"
 		;;
+	*"HAME MPR-A2")
+ 		name="mpr-a2"
+ 		;;
 	*"NBG-419N")
 		name="nbg-419n"
 		;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 2d24f182d7..eaa7e64312 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -43,6 +43,7 @@ platform_check_image() {
 	freestation5 | \
 	hw550-3g | \
 	mofi3500-3gn | \
+	mpr-a2 | \
 	mzk-w300nh2 | \
 	nbg-419n | \
 	nw718 | \
-- 
cgit v1.2.3