From d1ca9d207acc1056bd460f7cba2f50af87004f58 Mon Sep 17 00:00:00 2001 From: Zoltan HERPAI Date: Wed, 5 Feb 2014 08:42:28 +0000 Subject: sunxi: initial 3.13 support Signed-off-by: Zoltan HERPAI git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39471 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- .../173-3-dt-sun4i-add-ehci-cubieboard.patch | 86 ++++++++++++++++++++++ 1 file changed, 86 insertions(+) create mode 100644 target/linux/sunxi/patches-3.13/173-3-dt-sun4i-add-ehci-cubieboard.patch (limited to 'target/linux/sunxi/patches-3.13/173-3-dt-sun4i-add-ehci-cubieboard.patch') diff --git a/target/linux/sunxi/patches-3.13/173-3-dt-sun4i-add-ehci-cubieboard.patch b/target/linux/sunxi/patches-3.13/173-3-dt-sun4i-add-ehci-cubieboard.patch new file mode 100644 index 0000000000..a71e6b4d43 --- /dev/null +++ b/target/linux/sunxi/patches-3.13/173-3-dt-sun4i-add-ehci-cubieboard.patch @@ -0,0 +1,86 @@ +From 875bbd46c296e4b9ed130848bc64be5cf39669c8 Mon Sep 17 00:00:00 2001 +From: arokux +Date: Wed, 18 Sep 2013 22:45:06 +0200 +Subject: [PATCH] ARM: sun4i: dt: Add EHCI bindings to Cubieboard-A10 + +Signed-off-by: Hans de Goede + +Conflicts: + arch/arm/boot/dts/sun4i-a10-cubieboard.dts +--- + arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 46 ++++++++++++++++++++++++++++++ + 1 file changed, 46 insertions(+) + +diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts +index 53ac453..48864a4 100644 +--- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts ++++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts +@@ -77,6 +77,20 @@ + allwinner,drive = <1>; + allwinner,pull = <0>; + }; ++ ++ usb1_vbus_pin: usb1_vbus_pin@0 { ++ allwinner,pins = "PH6"; ++ allwinner,function = "gpio_out"; ++ allwinner,drive = <0>; ++ allwinner,pull = <2>; ++ }; ++ ++ usb2_vbus_pin: usb2_vbus_pin@0 { ++ allwinner,pins = "PH3"; ++ allwinner,function = "gpio_out"; ++ allwinner,drive = <0>; ++ allwinner,pull = <2>; ++ }; + }; + + uart0: serial@01c28000 { +@@ -96,6 +110,16 @@ + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + }; ++ ++ ehci0: ehci0@0x01c14000 { ++ vbus-supply = <®_usb1_vbus>; ++ status = "okay"; ++ }; ++ ++ ehci1: ehci1@0x01c1c000 { ++ vbus-supply = <®_usb2_vbus>; ++ status = "okay"; ++ }; + }; + + leds { +@@ -128,5 +152,27 @@ + gpio = <&pio 1 8 0>; + enable-active-high; + }; ++ ++ reg_usb1_vbus: usb1-vbus { ++ compatible = "regulator-fixed"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&usb1_vbus_pin>; ++ regulator-name = "usb1-vbus"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ enable-active-high; ++ gpio = <&pio 7 6 0>; ++ }; ++ ++ reg_usb2_vbus: usb2-vbus { ++ compatible = "regulator-fixed"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&usb2_vbus_pin>; ++ regulator-name = "usb2-vbus"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ enable-active-high; ++ gpio = <&pio 7 3 0>; ++ }; + }; + }; +-- +1.8.5.1 + -- cgit v1.2.3