From 023b465fbab6f672219706bbe19a9fbfa38c6192 Mon Sep 17 00:00:00 2001 From: Jan Grulich Date: Mon, 24 Aug 2015 16:03:47 +0100 Subject: [PATCH 170/171] RaspiDAC3 support Signed-off-by: Jan Grulich --- arch/arm/boot/dts/overlays/Makefile | 1 + arch/arm/boot/dts/overlays/README | 6 + arch/arm/boot/dts/overlays/raspidac3-overlay.dts | 45 ++++++ arch/arm/configs/bcm2709_defconfig | 1 + arch/arm/configs/bcmrpi_defconfig | 1 + sound/soc/bcm/Kconfig | 8 + sound/soc/bcm/Makefile | 2 + sound/soc/bcm/raspidac3.c | 191 +++++++++++++++++++++++ 8 files changed, 255 insertions(+) create mode 100644 arch/arm/boot/dts/overlays/raspidac3-overlay.dts create mode 100644 sound/soc/bcm/raspidac3.c --- a/arch/arm/boot/dts/overlays/Makefile +++ b/arch/arm/boot/dts/overlays/Makefile @@ -37,6 +37,7 @@ dtb-$(RPI_DT_OVERLAYS) += pitft28-resist dtb-$(RPI_DT_OVERLAYS) += pps-gpio-overlay.dtb dtb-$(RPI_DT_OVERLAYS) += pwm-overlay.dtb dtb-$(RPI_DT_OVERLAYS) += pwm-2chan-overlay.dtb +dtb-$(RPI_DT_OVERLAYS) += raspidac3-overlay.dtb dtb-$(RPI_DT_OVERLAYS) += rpi-dac-overlay.dtb dtb-$(RPI_DT_OVERLAYS) += rpi-display-overlay.dtb dtb-$(RPI_DT_OVERLAYS) += rpi-ft5406-overlay.dtb --- a/arch/arm/boot/dts/overlays/README +++ b/arch/arm/boot/dts/overlays/README @@ -455,6 +455,12 @@ Params: pin Output clock PWM clock frequency (informational) +Name: raspidac3 +Info: Configures the RaspiDAV Rev.3x audio card +Load: dtoverlay=raspidac3 +Params: + + Name: rpi-dac Info: Configures the RPi DAC audio card Load: dtoverlay=rpi-dac --- /dev/null +++ b/arch/arm/boot/dts/overlays/raspidac3-overlay.dts @@ -0,0 +1,45 @@ +// Definitions for RaspiDACv3 +/dts-v1/; +/plugin/; + +/ { + compatible = "brcm,bcm2708"; + + fragment@0 { + target = <&sound>; + __overlay__ { + compatible = "jg,raspidacv3"; + i2s-controller = <&i2s>; + status = "okay"; + }; + }; + + fragment@1 { + target = <&i2s>; + __overlay__ { + status = "okay"; + }; + }; + + fragment@2 { + target = <&i2c1>; + __overlay__ { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + pcm5122@4c { + #sound-dai-cells = <0>; + compatible = "ti,pcm5122"; + reg = <0x4c>; + status = "okay"; + }; + + tpa6130a2: tpa6130a2@60 { + compatible = "ti,tpa6130a2"; + reg = <0x60>; + status = "okay"; + }; + }; + }; +}; --- a/arch/arm/configs/bcm2709_defconfig +++ b/arch/arm/configs/bcm2709_defconfig @@ -830,6 +830,7 @@ CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP=m CONFIG_SND_BCM2708_SOC_RPI_DAC=m CONFIG_SND_BCM2708_SOC_RPI_PROTO=m CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC=m +CONFIG_SND_BCM2708_SOC_RASPIDAC3=m CONFIG_SND_SOC_WM8804_I2C=m CONFIG_SND_SIMPLE_CARD=m CONFIG_SOUND_PRIME=m --- a/arch/arm/configs/bcmrpi_defconfig +++ b/arch/arm/configs/bcmrpi_defconfig @@ -823,6 +823,7 @@ CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP=m CONFIG_SND_BCM2708_SOC_RPI_DAC=m CONFIG_SND_BCM2708_SOC_RPI_PROTO=m CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC=m +CONFIG_SND_BCM2708_SOC_RASPIDAC3=m CONFIG_SND_SOC_WM8804_I2C=m CONFIG_SND_SIMPLE_CARD=m CONFIG_SOUND_PRIME=m --- a/sound/soc/bcm/Kconfig +++ b/sound/soc/bcm/Kconfig @@ -67,3 +67,11 @@ config SND_BCM2708_SOC_IQAUDIO_DAC select SND_SOC_PCM512x_I2C help Say Y or M if you want to add support for IQaudIO-DAC. + +config SND_BCM2708_SOC_RASPIDAC3 + tristate "Support for RaspiDAC Rev.3x" + depends on SND_BCM2708_SOC_I2S + select SND_SOC_PCM512x_I2C + select SND_SOC_TPA6130A2 + help + Say Y or M if you want to add support for RaspiDAC Rev.3x. --- a/sound/soc/bcm/Makefile +++ b/sound/soc/bcm/Makefile @@ -16,6 +16,7 @@ snd-soc-hifiberry-amp-objs := hifiberry_ snd-soc-rpi-dac-objs := rpi-dac.o snd-soc-rpi-proto-objs := rpi-proto.o snd-soc-iqaudio-dac-objs := iqaudio-dac.o +snd-soc-raspidac3-objs := raspidac3.o obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DAC) += snd-soc-hifiberry-dac.o obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUS) += snd-soc-hifiberry-dacplus.o @@ -24,3 +25,4 @@ obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_A obj-$(CONFIG_SND_BCM2708_SOC_RPI_DAC) += snd-soc-rpi-dac.o obj-$(CONFIG_SND_BCM2708_SOC_RPI_PROTO) += snd-soc-rpi-proto.o obj-$(CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC) += snd-soc-iqaudio-dac.o +obj-$(CONFIG_SND_BCM2708_SOC_RASPIDAC3) += snd-soc-raspidac3.o --- /dev/null +++ b/sound/soc/bcm/raspidac3.c @@ -0,0 +1,191 @@ +/* + * ASoC Driver for RaspiDAC v3 + * + * Author: Jan Grulich + * Copyright 2015 + * based on code by Daniel Matuschek + * based on code by Florian Meier + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#include +#include + +#include +#include +#include +#include +#include +#include + +#include "../codecs/pcm512x.h" +#include "../codecs/tpa6130a2.h" + +/* sound card init */ +static int snd_rpi_raspidac3_init(struct snd_soc_pcm_runtime *rtd) +{ + int ret; + struct snd_soc_card *card = rtd->card; + struct snd_soc_codec *codec = rtd->codec; + snd_soc_update_bits(codec, PCM512x_GPIO_EN, 0x08, 0x08); + snd_soc_update_bits(codec, PCM512x_GPIO_OUTPUT_4, 0xf, 0x02); + snd_soc_update_bits(codec, PCM512x_GPIO_CONTROL_1, 0x08,0x00); + + ret = snd_soc_limit_volume(codec, "Digital Playback Volume", 207); + if (ret < 0) + dev_warn(card->dev, "Failed to set volume limit: %d\n", ret); + else { + struct snd_kcontrol *kctl; + + ret = tpa6130a2_add_controls(codec); + if (ret < 0) + dev_warn(card->dev, "Failed to add TPA6130A2 controls: %d\n", + ret); + ret = snd_soc_limit_volume(codec, + "TPA6130A2 Headphone Playback Volume", + 54); + if (ret < 0) + dev_warn(card->dev, "Failed to set TPA6130A2 volume limit: %d\n", + ret); + kctl = snd_soc_card_get_kcontrol(card, + "TPA6130A2 Headphone Playback Volume"); + if (kctl) { + strcpy(kctl->id.name, "Headphones Playback Volume"); + /* disable the volume dB scale so alsamixer works */ + kctl->vd[0].access = SNDRV_CTL_ELEM_ACCESS_READWRITE; + } + + kctl = snd_soc_card_get_kcontrol(card, + "TPA6130A2 Headphone Playback Switch"); + if (kctl) + strcpy(kctl->id.name, "Headphones Playback Switch"); + } + + return 0; +} + +/* set hw parameters */ +static int snd_rpi_raspidac3_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *cpu_dai = rtd->cpu_dai; + + unsigned int sample_bits = + snd_pcm_format_physical_width(params_format(params)); + + return snd_soc_dai_set_bclk_ratio(cpu_dai, sample_bits * 2); +} + +/* startup */ +static int snd_rpi_raspidac3_startup(struct snd_pcm_substream *substream) { + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_codec *codec = rtd->codec; + snd_soc_update_bits(codec, PCM512x_GPIO_CONTROL_1, 0x08,0x08); + tpa6130a2_stereo_enable(codec, 1); + return 0; +} + +/* shutdown */ +static void snd_rpi_raspidac3_shutdown(struct snd_pcm_substream *substream) { + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_codec *codec = rtd->codec; + snd_soc_update_bits(codec, PCM512x_GPIO_CONTROL_1, 0x08,0x00); + tpa6130a2_stereo_enable(codec, 0); +} + +/* machine stream operations */ +static struct snd_soc_ops snd_rpi_raspidac3_ops = { + .hw_params = snd_rpi_raspidac3_hw_params, + .startup = snd_rpi_raspidac3_startup, + .shutdown = snd_rpi_raspidac3_shutdown, +}; + +/* interface setup */ +static struct snd_soc_dai_link snd_rpi_raspidac3_dai[] = { +{ + .name = "RaspiDAC Rev.3x", + .stream_name = "RaspiDAC HiFi", + .cpu_dai_name = "bcm2708-i2s.0", + .codec_dai_name = "pcm512x-hifi", + .platform_name = "bcm2708-i2s.0", + .codec_name = "pcm512x.1-004c", + .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBS_CFS, + .ops = &snd_rpi_raspidac3_ops, + .init = snd_rpi_raspidac3_init, +}, +}; + +/* audio machine driver */ +static struct snd_soc_card snd_rpi_raspidac3 = { + .name = "RaspiDAC Rev.3x HiFi Audio Card", + .dai_link = snd_rpi_raspidac3_dai, + .num_links = ARRAY_SIZE(snd_rpi_raspidac3_dai), +}; + +/* sound card test */ +static int snd_rpi_raspidac3_probe(struct platform_device *pdev) +{ + int ret = 0; + + snd_rpi_raspidac3.dev = &pdev->dev; + + if (pdev->dev.of_node) { + struct device_node *i2s_node; + struct snd_soc_dai_link *dai = &snd_rpi_raspidac3_dai[0]; + i2s_node = of_parse_phandle(pdev->dev.of_node, + "i2s-controller", 0); + + if (i2s_node) { + dai->cpu_dai_name = NULL; + dai->cpu_of_node = i2s_node; + dai->platform_name = NULL; + dai->platform_of_node = i2s_node; + } + } + + ret = snd_soc_register_card(&snd_rpi_raspidac3); + if (ret) + dev_err(&pdev->dev, + "snd_soc_register_card() failed: %d\n", ret); + + return ret; +} + +/* sound card disconnect */ +static int snd_rpi_raspidac3_remove(struct platform_device *pdev) +{ + return snd_soc_unregister_card(&snd_rpi_raspidac3); +} + +static const struct of_device_id raspidac3_of_match[] = { + { .compatible = "jg,raspidacv3", }, + {}, +}; +MODULE_DEVICE_TABLE(of, raspidac3_of_match); + +/* sound card platform driver */ +static struct platform_driver snd_rpi_raspidac3_driver = { + .driver = { + .name = "snd-rpi-raspidac3", + .owner = THIS_MODULE, + .of_match_table = raspidac3_of_match, + }, + .probe = snd_rpi_raspidac3_probe, + .remove = snd_rpi_raspidac3_remove, +}; + +module_platform_driver(snd_rpi_raspidac3_driver); + +MODULE_AUTHOR("Jan Grulich "); +MODULE_DESCRIPTION("ASoC Driver for RaspiDAC Rev.3x"); +MODULE_LICENSE("GPL v2");