From ff5fadaff39180dc0b652753b5614a564711be29 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Wed, 24 Jul 2013 17:12:11 +0100 Subject: [PATCH] MIPS: BMIPS: fix slave CPU booting when physical CPU is not 0 The current BMIPS SMP code assumes that the slave CPU is physical and logical CPU 1, but on some systems such as BCM3368, the slave CPU is physical CPU0. Fix the code to read the physical CPU (thread ID) we are running this code on, and adjust the relocation vector address based on it. This allows bringing up the second CPU on BCM3368 for instance. Signed-off-by: Florian Fainelli Cc: linux-mips@linux-mips.org Cc: cernekee@gmail.com Cc: jogo@openwrt.org Cc: blogic@openwrt.org Patchwork: https://patchwork.linux-mips.org/patch/5621/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/bmips_vec.S | 6 +++++- arch/mips/kernel/smp-bmips.c | 10 ++++++++-- 2 files changed, 13 insertions(+), 3 deletions(-) --- a/arch/mips/kernel/bmips_vec.S +++ b/arch/mips/kernel/bmips_vec.S @@ -56,7 +56,11 @@ LEAF(bmips_smp_movevec) /* set up CPU1 CBR; move BASE to 0xa000_0000 */ li k0, 0xff400000 mtc0 k0, $22, 6 - li k1, CKSEG1 | BMIPS_RELO_VECTOR_CONTROL_1 + /* set up relocation vector address based on thread ID */ + mfc0 k1, $22, 3 + srl k1, 16 + andi k1, 0x8000 + or k1, CKSEG1 | BMIPS_RELO_VECTOR_CONTROL_0 or k0, k1 li k1, 0xa0080000 sw k1, 0(k0) --- a/arch/mips/kernel/smp-bmips.c +++ b/arch/mips/kernel/smp-bmips.c @@ -196,9 +196,15 @@ static void bmips_init_secondary(void) #if defined(CONFIG_CPU_BMIPS4350) || defined(CONFIG_CPU_BMIPS4380) void __iomem *cbr = BMIPS_GET_CBR(); unsigned long old_vec; + unsigned long relo_vector; + int boot_cpu; - old_vec = __raw_readl(cbr + BMIPS_RELO_VECTOR_CONTROL_1); - __raw_writel(old_vec & ~0x20000000, cbr + BMIPS_RELO_VECTOR_CONTROL_1); + boot_cpu = !!(read_c0_brcm_cmt_local() & (1 << 31)); + relo_vector = boot_cpu ? BMIPS_RELO_VECTOR_CONTROL_0 : + BMIPS_RELO_VECTOR_CONTROL_1; + + old_vec = __raw_readl(cbr + relo_vector); + __raw_writel(old_vec & ~0x20000000, cbr + relo_vector); clear_c0_cause(smp_processor_id() ? C_SW1 : C_SW0); #elif defined(CONFIG_CPU_BMIPS5000)