From 1c0aed9b4cfb7bb891aab07a429436d017ac4d7c Mon Sep 17 00:00:00 2001 From: Ezequiel Garcia Date: Thu, 14 Nov 2013 18:25:34 -0300 Subject: [PATCH 148/203] mtd: nand: pxa3xx: Move the data buffer clean to prepare_start_command() To allow future support of multiple page reading/writing, move the data buffer clean out of prepare_set_command(). This is done to prevent the data buffer from being cleaned on every command preparation, when a multiple command sequence is implemented to read/write pages larger than the FIFO size (2 KiB). Signed-off-by: Ezequiel Garcia Tested-by: Daniel Mack Signed-off-by: Brian Norris --- drivers/mtd/nand/pxa3xx_nand.c | 21 ++++++++++++++++----- 1 file changed, 16 insertions(+), 5 deletions(-) --- a/drivers/mtd/nand/pxa3xx_nand.c +++ b/drivers/mtd/nand/pxa3xx_nand.c @@ -609,6 +609,9 @@ static void set_command_address(struct p static void prepare_start_command(struct pxa3xx_nand_info *info, int command) { + struct pxa3xx_nand_host *host = info->host[info->cs]; + struct mtd_info *mtd = host->mtd; + /* reset data and oob column point to handle data */ info->buf_start = 0; info->buf_count = 0; @@ -633,6 +636,19 @@ static void prepare_start_command(struct info->ndcb2 = 0; break; } + + /* + * If we are about to issue a read command, or about to set + * the write address, then clean the data buffer. + */ + if (command == NAND_CMD_READ0 || + command == NAND_CMD_READOOB || + command == NAND_CMD_SEQIN) { + + info->buf_count = mtd->writesize + mtd->oobsize; + memset(info->data_buff, 0xFF, info->buf_count); + } + } static int prepare_set_command(struct pxa3xx_nand_info *info, int command, @@ -674,16 +690,11 @@ static int prepare_set_command(struct px info->ndcb0 |= NDCB0_DBC | (NAND_CMD_READSTART << 8); set_command_address(info, mtd->writesize, column, page_addr); - info->buf_count = mtd->writesize + mtd->oobsize; - memset(info->data_buff, 0xFF, info->buf_count); break; case NAND_CMD_SEQIN: set_command_address(info, mtd->writesize, column, page_addr); - info->buf_count = mtd->writesize + mtd->oobsize; - memset(info->data_buff, 0xFF, info->buf_count); - break; case NAND_CMD_PAGEPROG: