From c3593cc95c240663bd9c191c1029237e467575af Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 7 Feb 2014 18:08:03 +0100 Subject: [PATCH] ARM: sun4i: dt: Add sun4i-a10-usb-vbus-reg dts include file Almost all sun4i and sun7i boards have a gpio controlled vbus for usb1 and usb2, using gpio pin PH6 and PH3 as in the reference design. This commit adds an include file for this, avoiding the need to copy and paste the exact same dts code to almost all sun4i and sun7i dts files. Signed-off-by: Hans de Goede --- arch/arm/boot/dts/sun4i-a10-usb-vbus-reg.dtsi | 54 +++++++++++++++++++++++++++ 1 file changed, 54 insertions(+) create mode 100644 arch/arm/boot/dts/sun4i-a10-usb-vbus-reg.dtsi diff --git a/arch/arm/boot/dts/sun4i-a10-usb-vbus-reg.dtsi b/arch/arm/boot/dts/sun4i-a10-usb-vbus-reg.dtsi new file mode 100644 index 0000000..803be0c --- /dev/null +++ b/arch/arm/boot/dts/sun4i-a10-usb-vbus-reg.dtsi @@ -0,0 +1,54 @@ +/* + * sun4i boards usb vbus supply common code + * + * Copyright 2014 - Hans de Goede + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/ { + soc@01c00000 { + pio: pinctrl@01c20800 { + usb1_vbus_pin_a: usb1_vbus_pin@0 { + allwinner,pins = "PH6"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + usb2_vbus_pin_a: usb2_vbus_pin@0 { + allwinner,pins = "PH3"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + }; + }; + + reg_usb1_vbus: usb1-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&usb1_vbus_pin_a>; + regulator-name = "usb1-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&pio 7 6 0>; + }; + + reg_usb2_vbus: usb2-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&usb2_vbus_pin_a>; + regulator-name = "usb2-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&pio 7 3 0>; + }; +}; -- 1.8.5.5